Antibacterial Properties of Graphene-Based Nanomaterials

Photothermal controlled antibacterial Ta4C3Tx-AgNPs/nanocellulose bioplastic food packaging

Uncontrolled antibacterial, insufficient barrier and low strength are the bottlenecks of food packaging applications. Herein, Ta4C3Tx nanosheet as a template was used to prepare Ta4C3Tx immobilized silver nanoparticles (Ta4C3Tx-AgNPs), which was compounded with nanocellulose to obtain high-strength and high barrier controllable bactericidal nanocellulose-based bioplastic packaging (CTa-Ag). The results indicated that due to the hydrogen bonding between nanocellulose and Ta4C3Tx, the bridging effect of QCS (quaternized chitosan) and the filling of Ta4C3Tx-AgNPs, the CTa-Ag had tightly stacked microstructure, which endowed them with excellent mechanical properties (4.0 GPa), ultra-low oxygen permeability (0.009 cm3/m2·d·atm) and stable photothermal conversion efficiency. Importantly, the packaging exhibits the ability to control the release of antibacterial active ingredients. Moreover, the synergistic effects of controllable release of nano active factors, photothermal and photocatalysis in CTa-Ag gave it long-lasting antibacterial properties. This study brings new insights into the design and manufacture of multifunctional, controllable and long-lasting antibacterial bioplastic food packaging.

Emerging trends and future challenges of advanced 2D nanomaterials for combating bacterial resistance

The number of multi-drug-resistant bacteria has increased over the last few decades, which has caused a detrimental impact on public health worldwide. In resolving antibiotic resistance development among different bacterial communities, new antimicrobial agents and nanoparticle-based strategies need to be designed foreseeing the slow discovery of new functioning antibiotics. Advanced research studies have revealed the significant disinfection potential of two-dimensional nanomaterials (2D NMs) to be severed as effective antibacterial agents due to their unique physicochemical properties. This review covers the current research progress of 2D NMs-based antibacterial strategies based on an inclusive explanation of 2D NMs' impact as antibacterial agents, including a detailed introduction to each possible well-known antibacterial mechanism. The impact of the physicochemical properties of 2D NMs on their antibacterial activities has been deliberated while explaining the toxic effects of 2D NMs and discussing their biomedical significance, dysbiosis, and cellular nanotoxicity. Adding to the challenges, we also discussed the major issues regarding the current quality and availability of nanotoxicity data. However, smart advancements are required to fabricate biocompatible 2D antibacterial NMs and exploit their potential to combat bacterial resistance clinically.

Graphene oxide and oxidized carbon nanodiscs as biomedical scaffolds for the targeted delivery of quercetin to cancer cells

Targeting cancer cells without affecting normal cells poses a particular challenge. Nevertheless, the utilization of innovative nanomaterials in targeted cancer therapy has witnessed significant growth in recent years. In this study, we examined two layered carbon nanomaterials, graphene and carbon nanodiscs (CNDs), both of which possess extraordinary physicochemical and structural properties alongside their nano-scale dimensions, and explored their potential as nanocarriers for quercetin, a bioactive flavonoid known for its potent anticancer properties. Within both graphitic allotropes, oxidation results in heightened hydrophilicity and the incorporation of oxygen functionalities. These factors are of great significance for drug delivery purposes. The successful oxidation and interaction of quercetin with both graphene (GO) and CNDs (oxCNDs) have been confirmed through a range of characterization techniques, including FTIR, Raman, and XPS spectroscopy, as well as XRD and AFM. In vitro anticancer tests were conducted on both normal (NIH/3T3) and glioblastoma (U87) cells. The results revealed that the bonding of quercetin with GO and oxCNDs enhances its cytotoxic effect on cancer cells. GO-Quercetin and oxCNDs-Quercetin induced G0/G1 cell cycle arrest in U87 cells, whereas oxCNDs caused G2/M arrest, indicating a distinct mode of action. In long-term survival studies, cancer cells exhibited significantly lower viability than normal cells at all corresponding doses of GO-Quercetin and oxCNDs-Quercetin. This work leads us to conclude that the conjugation of quercetin to GO and oxCNDs shows promising potential for targeted anticancer activity. However, further research at the molecular level is necessary to substantiate our preliminary findings.

Graphene as a promising material in orthodontics: A review

Graphene is an extraordinary material with unique mechanical, chemical, and thermal properties. Additionally, it boasts high surface area and antimicrobial properties, making it an attractive option for researchers exploring innovative materials for biomedical applications. Although there have been various studies on graphene applications in different biomedical fields, limited reviews have been conducted on its use in dentistry, and no reviews have focused on its application in the orthodontic field. This review aims to present a comprehensive overview of graphene-based materials, with an emphasis on their antibacterial mechanisms and the factors that influence these properties. Additionally, the review summarizes the dental applications of graphene, spotlighting the studies of its orthodontic application as they can be used to enhance the antibacterial and mechanical properties of orthodontic materials such as adhesives, archwires, and splints. Also, they can be utilized to enhance bone remodeling during orthodontic tooth movement. An electronic search was carried out in Scopus, PubMed, Science Direct, and Wiley Online Library digital database platforms using graphene and orthodontics as keywords. The search was restricted to English language publications without a time limit. This review highlights the need for further laboratory and clinical research using graphene-based materials to improve the properties of orthodontic materials to make them available for clinical use.

Adsorption and antibacterial studies of a novel hydrogel adsorbent based on ternary eco-polymers doped with sulfonated graphene oxide developed from upcycled plastic waste

A novel ternary blended polymer composed of cost-effective and readily available polymers was synthesized using poly (vinyl alcohol) (PVA), iota carrageenan (IC), and poly (vinyl pyrrolidone) (PVP). Sulfonated graphene oxide (SGO), prepared from recycled drinking water bottles, was utilized as a doping agent. Varying amounts (1-3 wt%) were combined into the polymer matrix. The produced hydrogel film was examined as a potential adsorbent hydrogel film for the removal of methylene blue (MB) and Gentamicin sulfate (GMS) antibiotic from an aqueous solution. The experimental results demonstrate that the presence of SGO significantly increased the adsorption efficiency of PVA/IC/PVP hydrogel film. The antimicrobial tests revealed that the PVA/IC/PVP-3% SGO hydrogel film exhibited the most potent activity against all the tested pathogenic bacteria. However, the adsorption results for MB and GMS showed that the addition of 3 wt% SGO resulted in a removal percentage that was a two fold increase in the removal percentage compared with the undoped PVA/IC/PVP hydrogel film. Furthermore, the response surface methodology (RSM) model was utilized to examine and optimize several operating parameters, including time, pH of the solution, and initial pollutant concentration. The adsorption kinetics were better characterized by the pseudo-second-order kinetics model. The composite film containing 3 wt% SGO had a maximum adsorption capacity of 606 mg g-1 for MB and 654 mg g-1 for GMS, respectively. The generated nanocomposite hydrogel film demonstrated promising potential for application in water purification systems.

Antibacterial wound dressing with cross-linked electrospun surface from reduced graphene oxide doped polyvinyl alcohol/sodium caseinate blends

In this study, a new biomaterial with polyvinyl alcohol (PVA)/sodium caseinate (SodCa)/reduced graphene oxide (rGO) structure was developed. Antibacterial effective nanofibers were successfully produced by electrospinning method from 1%, 3%, 5%, and 7% rGO added PVA/SodCa (60:40, w:w) solution mixtures prepared for use as modern wound dressings. To create a usage area, especially in exuding wounds, hydrophilic PVA/SodCa/rGO electrospun mats were cross-linked by dipping them in a glutaraldehyde (GLA) bath. The surface micrographs of all nanofibers were homogeneous and smooth. rGO-doped biomaterials were obtained as thin nanofibers in the range of 301-348 nm. Nanofibers, which were completely soluble in water, after cross-linking preserved their existence in the range of 87%-81% at the end of the 24th hour in distilled water. It was reported that these biomaterials that persist in an aqueous environment show swelling behavior in the range of 275%-608%. The porosity of uncross-linked pure PVA/SodCa nanofibers increased by 46.75% after cross-linking. Moreover, the tensile strength of cross-linked PVA/SodCa electrospun mats increased in the presence of rGO. Provided that wound dressing is done every 24 h with 3% rGO-doped PVA/SodCa nanofiber and provided that wound dressing is done every 48 h with 5% rGO-doped PVA/SodCa nanofiber showed antibacterial activity against S. aureus as 99.38% and 99.55%, respectively.

Graphene-based nanomaterials for the removal of emerging contaminants of concern from water and their potential adaptation for point-of-use applications

Considering the plethora of work on the exceptional environmental performance of 2D nanomaterials, there is still a missing link in addressing their practical application in point-of-use (POU) water treatment. By reviewing the exceptional environmental performance of 2D nanomaterials with specific emphasis on graphene and its derivatives, this review aims at inspiring further discussions and research in graphene-based POU water treatment with particular focus on the removal of emerging contaminants of concern (ECCs), which is largely missing in the literature. We outlined the prevalence of ECCs in the environment, their health effects both on humans and marine life, and the potential of efficiently removing them from water using three-dimensional graphene-based macrostructures to ensure ease of adsorbent recovery and reuse compared to nanostructures. Given various successful studies showing superior adsorption capacity of graphene nanosheets, we give an account of the recent developments in graphene-based adsorbents. Moreover, several cost-effective materials which can be easily self-assembled with nanosheets to improve their environmental performance and safety for POU water treatment purposes were highlighted. We highlighted the strategy to overcome challenges of adsorbent regeneration and contaminant degradation; and concluded by noting the need for policy makers to act decisively considering the conservative nature of the water treatment industry, and the potential health risks from ingesting ECCs through drinking water. We further justified the need for the development of advanced POU water treatment devices in the face of the growing challenges regarding ECCs in surface water, and the rising cases of drinking water advisories across the world.

Emerging strategies and therapeutic innovations for combating drug resistance in Staphylococcus aureus strains: A comprehensive review

In recent years, antibiotic therapy has encountered significant challenges due to the rapid emergence of multidrug resistance among bacteria responsible for life-threatening illnesses, creating uncertainty about the future management of infectious diseases. The escalation of antimicrobial resistance in the post-COVID era compared to the pre-COVID era has raised global concern. The prevalence of nosocomial-related infections, especially outbreaks of drug-resistant strains of Staphylococcus aureus, have been reported worldwide, with India being a notable hotspot for such occurrences. Various virulence factors and mutations characterize nosocomial infections involving S. aureus. The lack of proper alternative treatments leading to increased drug resistance emphasizes the need to investigate and examine recent research to combat future pandemics. In the current genomics era, the application of advanced technologies such as next-generation sequencing (NGS), machine learning (ML), and quantum computing (QC) for genomic analysis and resistance prediction has significantly increased the pace of diagnosing drug-resistant pathogens and insights into genetic intricacies. Despite prompt diagnosis, the elimination of drug-resistant infections remains unattainable in the absence of effective alternative therapies. Researchers are exploring various alternative therapeutic approaches, including phage therapy, antimicrobial peptides, photodynamic therapy, vaccines, host-directed therapies, and more. The proposed review mainly focuses on the resistance journey of S. aureus over the past decade, detailing its resistance mechanisms, prevalence in the subcontinent, innovations in rapid diagnosis of the drug-resistant strains, including the applicants of NGS and ML application along with QC, it helps to design alternative novel therapeutics approaches against S. aureus infection.

Immobilized lipase enzyme on green synthesized magnetic nanoparticles using Psidium guava leaves for dye degradation and antimicrobial activities

Zinc ferrite nanoparticles (ZnF NPs) were synthesized by a green method using Psidium guava Leaves extract and characterized via structural and optical properties. The surface of ZnF NPs was stabilized with citric acid (CA) by a direct addition method to obtain (ZnF-CA NPs), and then lipase (LP) enzyme was immobilized on ZnF-CA NPs to obtain a modified ZnF-CA-LP nanocomposite (NCs). The prepared sample's photocatalytic activity against Methylene blue dye (MB) was determined. The antioxidant activity of ZnF-CA-LP NCs was measured using 1,1-diphenyl-2-picryl hydrazyl (DPPH) as a source of free radicals. In addition, the antibacterial and antibiofilm capabilities of these substances were investigated by testing them against gram-positive Staphylococcus aureus (S. aureus ATCC 25923) and gram-negative Escherichia coli (E. coli ATCC 25922) bacterial strains. The synthesized ZnF NPs were discovered to be situated at the core of the material, as determined by XRD, HRTEM, and SEM investigations, while the CA and lipase enzymes were coated in this core. The ZnF-CA-LP NCs crystallite size was around 35.0 nm at the (311) plane. Results obtained suggested that 0.01 g of ZnF-CA-LP NCs achieved 96.0% removal of 5.0 ppm of MB at pH 9.0. In-vitro zone of inhibition (ZOI) and minimum inhibitory concentration (MIC) results verified that ZnF-CA-LP NCs exhibited its encouraged antimicrobial activity against S. aureus and E. coli (20.0 ± 0.512, and 27.0 ± 0.651 mm ZOI, respectively) & (1.25, and 0.625 μg/ml MIC, respectively). ZnF-CA-LP NPs showed antibiofilm percentage against S. aureus (88.4%) and E. coli (96.6%). Hence, ZnF-CA-LP NCs are promising for potential applications in environmental and biomedical uses.

Carbon Nanodisks Decorated with Guanidinylated Hyperbranched Polyethyleneimine Derivatives as Efficient Antibacterial Agents

Non-toxic carbon-based hybrid nanomaterials based on carbon nanodisks were synthesized and assessed as novel antibacterial agents. Specifically, acid-treated carbon nanodisks (oxCNDs), as a safe alternative material to graphene oxide, interacted through covalent and non-covalent bonding with guanidinylated hyperbranched polyethyleneimine derivatives (GPEI5K and GPEI25K), affording the oxCNDs@GPEI5K and oxCNDs@GPEI25K hybrids. Their physico-chemical characterization confirmed the successful and homogenous attachment of GPEIs on the surface of oxCNDs, which, due to the presence of guanidinium groups, offered them improved aqueous stability. Moreover, the antibacterial activity of oxCNDs@GPEIs was evaluated against Gram-negative E. coli and Gram-positive S. aureus bacteria. It was found that both hybrids exhibited enhanced antibacterial activity, with oxCNDs@GPEI5K being more active than oxCNDs@GPEI25K. Their MIC and MBC values were found to be much lower than those of oxCNDs, revealing that the GPEI attachment endowed the hybrids with enhanced antibacterial properties. These improved properties were attributed to the polycationic character of the oxCNDs@GPEIs, which enables effective interaction with the bacterial cytoplasmic membrane and cell walls, leading to cell envelope damage, and eventually cell lysis. Finally, oxCNDs@GPEIs showed minimal cytotoxicity on mammalian cells, indicating that these hybrid nanomaterials have great potential to be used as safe and efficient antibacterial agents.

Photothermal Hydrogel Composites Featuring G4-Carbon Nanomaterial Networks for Staphylococcus aureus Inhibition

Microbial infections represent a significant health risk, often leading to severe complications and, in some cases, even fatalities. As a result, there is an urgent need to explore innovative drug delivery systems and alternative therapeutic techniques. The photothermal therapy has emerged as a promising antibacterial approach and is the focus of this study. Herein, we report the successful synthesis of two distinct supramolecular composite hydrogels by incorporating graphene oxide (GO) and single-walled carbon nanotubes (SWNTs) into guanosine quadruplex (G4) based hydrogels containing covalently bound β-cyclodextrin (β-CD). The G4 matrix was synthesized through a two-step process, establishing a robust network between G4 and β-CDs, followed by the encapsulation of either GO or SWNTs. Comprehensive characterization of these composite hydrogels were conducted using analytical techniques, including circular dichroism, Raman spectroscopy, rheological investigations, X-ray diffraction, and scanning electron microscopy. A notable discovery from the conducted research is the differential photothermal responses exhibited by the hydrogels when exposed to near-infrared laser irradiation. Specifically, SWNT-based hydrogels demonstrated superior photothermal performance, achieving a remarkable temperature increase of up to 52 °C, in contrast to GO-based hydrogels, which reached a maximum of 34 °C. These composite hydrogels showed good cytotoxicity evaluation results and displayed synergistic antibacterial activity against Staphylococcus aureus, positioning them as promising candidates for antibacterial photothermic platforms, particularly in the context of wound treatment. This study offers a valuable contribution to the development of advanced and combined therapeutic strategies for combating microbial infections and highlights the potential of carbon nanomaterial-enhanced supramolecular hydrogels in photothermal therapy applications.

Trends in the Incorporation of Antiseptics into Natural Polymer-Based Nanofibrous Mats

Nanofibrous materials represent a very promising form of advanced carrier systems that can be used industrially, especially in regenerative medicine as highly functional bandages, or advanced wound dressings. By incorporation of antimicrobial additives directly into the structure of the nanofiber carrier, the functionality of the layer is upgraded, depending on the final requirement-bactericidal, bacteriostatic, antiseptic, or a generally antimicrobial effect. Such highly functional nanofibrous layers can be prepared mostly by electrospinning technology from both synthetic and natural polymers. The presence of a natural polymer in the composition is very advantageous. Especially in medical applications where, due to the presence of the material close to the human body, the healing process is more efficient and without the occurrence of an unwanted inflammatory response. However, converting natural polymers into nanofibrous form, with a homogeneously distributed and stable additive, is a great challenge. Thus, a combination of natural and synthetic materials is often used. This review clearly summarizes the issue of the incorporation and effectiveness of different types of antimicrobial substances, such as nanoparticles, antibiotics, common antiseptics, or substances of natural origin, into electrospun nanofibrous layers made of mostly natural polymer materials. A section describing the problematic aspects of antimicrobial polymers is also included.

Ciprofloxacin-, Cefazolin-, and Methicilin-Soaked Graphene Paper as an Antibacterial Medium Suppressing Cell Growth

This paper presents the results of research on the impact of graphene paper on selected bacterial strains. Graphene oxide, from which graphene paper is made, has mainly bacteriostatic properties. Therefore, the main goal of this research was to determine the possibility of using graphene paper as a carrier of a medicinal substance. Studies of the degree of bacterial inhibition were performed on Staphylococcus aureus and Pseudomonas aeruginosa strains. Graphene paper was analyzed not only in the state of delivery but also after the incorporation of the antibiotics ciprofloxacin, cefazolin, and methicillin into its structures. In addition, Fourier-Transform Infrared Spectroscopy, contact angle, and microscopic analysis of bacteria on the surface of the examined graphene paper samples were also performed. Studies have shown that graphene paper with built-in ciprofloxacin had a bactericidal effect on the strains of Staphylococcus aureus and Pseudomonas aeruginosa. In contrast, methicillin, as well as cefazolin, deposited on graphene paper acted mainly locally. Studies have shown that graphene paper can be used as a carrier of selected medicinal substances.

The potential of graphene coatings as neural interfaces

Recent advances in nanotechnology design and fabrication have shaped the landscape for the development of ideal cell interfaces based on biomaterials. A holistic evaluation of the requirements for a cell interface is a highly complex task. Biocompatibility is a crucial requirement which is affected by the interface's properties, including elemental composition, morphology, and surface chemistry. This review explores the current state-of-the-art on graphene coatings produced by chemical vapor deposition (CVD) and applied as neural interfaces, detailing the key properties required to design an interface capable of physiologically interacting with neural cells. The interfaces are classified into substrates and scaffolds to differentiate the planar and three-dimensional environments where the cells can adhere and proliferate. The role of specific features such as mechanical properties, porosity and wettability are investigated. We further report on the specific brain-interface applications where CVD graphene paved the way to revolutionary advances in biomedicine. Future studies on the long-term effects of graphene-based materials in vivo will unlock even more potentially disruptive neuro-applications.

Comparative study between three carbonaceous nanoblades and nanodarts for antimicrobial applications

The design of nanostructured materials occupies a privileged position in the development and management of affordable and effective technology in the antibacterial sector. Here, we discuss the antimicrobial properties of three carbonaceous nanoblades and nanodarts materials of graphene oxide (GO), reduced graphene oxide (RGO), and single-wall carbon nanotubes (SWCNTs) that have a mechano-bactericidal effect, and the ability to piercing or slicing bacterial membranes. To demonstrate the significance of size, morphology and composition on the antibacterial activity mechanism, the designed nanomaterials have been characterized. The minimum inhibitory concentration (MIC), standard agar well diffusion, and transmission electron microscopy were utilized to evaluate the antibacterial activity of GO, RGO, and SWCNTs. Based on the evidence obtained, the three carbonaceous materials exhibit activity against all microbial strains tested by completely encapsulating bacterial cells and causing morphological disruption by degrading the microbial cell membrane in the order of RGO > GO > SWCNTs. Because of the external cell wall structure and outer membrane proteins, the synthesized carbonaceous nanomaterials exhibited higher antibacterial activity against Gram-positive bacterial strains than Gram-negative and fungal microorganisms. RGO had the lowest MIC values (0.062, 0.125, and 0.25 mg/mL against B. subtilis, S. aureus, and E. coli, respectively), as well as minimum fungal concentrations (0.5 mg/mL for both A. fumigatus and C. albicans). At 12 hr, the cell viability values against tested microbial strains were completely suppressed. Cell lysis and death occurred as a result of severe membrane damage caused by microorganisms perched on RGO nanoblades. Our work gives an insight into the design of effective graphene-based antimicrobial materials for water treatment and remediation.

An Overview of Biofilm-Associated Infections and the Role of Phytochemicals and Nanomaterials in Their Control and Prevention

Biofilm formation is considered one of the primary virulence mechanisms in Gram-positive and Gram-negative pathogenic species, particularly those responsible for chronic infections and promoting bacterial survival within the host. In recent years, there has been a growing interest in discovering new compounds capable of inhibiting biofilm formation. This is considered a promising antivirulence strategy that could potentially overcome antibiotic resistance issues. Effective antibiofilm agents should possess distinctive properties. They should be structurally unique, enable easy entry into cells, influence quorum sensing signaling, and synergize with other antibacterial agents. Many of these properties are found in both natural systems that are isolated from plants and in synthetic systems like nanoparticles and nanocomposites. In this review, we discuss the clinical nature of biofilm-associated infections and some of the mechanisms associated with their antibiotic tolerance. We focus on the advantages and efficacy of various natural and synthetic compounds as a new therapeutic approach to control bacterial biofilms and address multidrug resistance in bacteria.

Graphene Quantum Dots: Green Synthesis, Characterization, and Antioxidant and Antimicrobial Potential

Antibiotic resistance is becoming more common, emphasising the demand for novel antibacterial treatments. The current investigation describes the green synthesis of graphene quantum dots (GQDs) using M. indica leaves and characterization via Fourier-transform infrared spectra (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and ultraviolet-visible (UV-Vis) spectrophotometer. The results showed that GQDs are spherical in shape. In vitro antioxidant and antimicrobial studies indicate that the biological efficacy of synthesized GQDs was higher than the ethanolic leaf extract. GQDs exhibited the highest scavenging efficacy with lowest IC50 (half-maximal inhibitory concentration) value. However, antimicrobial study showed more inhibitory activity of GQDs against all screened microorganisms, i.e., Staphylococcus aureus, Escherichia coli, Bacillus subtilis, and Pseudomonas aeruginosa, and fungi, i.e., Aspergillus niger and Aspergillus flavus. Graphene quantum dots facilitate reactive oxygen species (ROS) which ultimately lead to antioxidant and antibacterial activity. This approach would provide an efficient alternate method for tackling microorganisms.

Fabrication and characterization of biomimetic plant cuticles from pullulan - graphene oxide (PU-GO) and beeswax - stearic acid (BW-SA) for Citrus Limon Rosso preservation

Inspired by the natural plant cuticles, a novel strategy was proposed for the fabrication of biomimetic plant cuticles from pullulan-graphene oxide (PU-GO) and beeswax-stearic acid (BW-SA), which could serve as hydrophilic polysaccharides and hydrophobic waxes, respectively. PU-GO and PU-GO/BW-SA in different GO concentrations (0, 10, 30 and 50 μg/mL) were prepared, and their structural characteristics and basic properties were investigated. Results showed that PU-GO/BW-SA possessed a hydrophilic layer and a hydrophobic structure similar to the structure of natural plant cuticles. The incorporation of GO enhanced the barrier properties of the films and PU-GO/BW-SA showed a higher contact angle, lower tensile strength and higher barrier properties compared with PU-GO. In addition, PU-GO/BW-SA in 10 μg/mL GO concentration (PU-GO10/BW-SA) possessed the lowest WVP (7.2 × 10-7 g/(m h Pa)) and a contact angle (93.78°) similar to natural plant cuticles. Applications in Citrus Limon Rosso further proved the potential of PU-GO10/BW-SA as a biomimetic plant cuticle in fruit preservation.

The potential of nano graphene oxide and chlorhexidine composite membranes for use as a surface layer in functionally graded membranes for periodontal lesions

Membranes have been used for treating periodontal defects and play a crucial role in guided bone regeneration applications. Nano graphene oxide have been exploited in tissue engineering due to its biomechanical properties. Its composite formulations with hydroxyapatite and chitosan with controlled degradation could aid in becoming part of a surface layer in a functionally graded membrane. The aim of the study was to synthesize chitosan and composite formulations of nano graphene oxide, hydroxyapatite and chlorhexidine digluconate using solvent casting technique and to characterize the physiochemical, mechanical, water vapor transmission rate (barrier), degradation and antimicrobial potential of the membranes. Altogether four different membranes were prepared (CH, CCG, 3511 and 3322). Results revealed the chemical interactions of hydroxyapatite, chitosan and nanographene oxide due to inter and intra molecular hydrogen bonding. The tensile strength of 3322 (33.72 ± 6.3 MPa) and 3511 (32.06 ± 5.4 MPa) was higher than CH (27.46 ± 9.6 MPa). CCG showed the lowest water vapor transmission rate (0.23 ± 0.01 g/h.m2) but the highest weight loss at day 14 (76.6 %). 3511 showed a higher drug release after 72 h (55.6 %) Significant biofilm growth inhibition was observed for all membranes. 3511 showed complete inhibition against A. actinomycetemcomitans. Detailed characterization of the synthesized membranes revealed that 3511 composite membrane proved to be a promising candidate for use as a surface layer of membranes for guided bone regeneration of periodontal lesions.

Changes in the Bacterial Communities of Biocomposites with Different Flame Retardants

In today's world, the use of environmentally friendly materials is strongly encouraged. These materials derive from primary raw materials of plant origin, like fibrous hemp, flax, and bamboo, or recycled materials, such as textiles or residual paper, making them suitable for the growth of microorganisms. Here, we investigate changes in bacterial communities in biocomposites made of hemp shives, corn starch, and either expandable graphite or a Flovan compound as flame retardants. Using Next Generation Sequencing (NGS), we found that after 12 months of incubation at 22 °C with a relative humidity of 65%, Proteobacteria accounted for >99.7% of the microbiome in composites with either flame retardant. By contrast, in the absence of flame retardants, the abundance of Proteobacteria decreased to 32.1%, while Bacteroidetes (36.6%), Actinobacteria (8.4%), and Saccharobacteria (TM7, 14.51%) appeared. Using the increasing concentrations of either expandable graphite or a Flovan compound in an LB medium, we were able to achieve up to a 5-log reduction in the viability of Bacillus subtilis, Pseudomonas aeruginosa, representatives of the Bacillus and Pseudomonas genera, the abundance of which varied in the biocomposites tested. Our results demonstrate that flame retardants act on both Gram-positive and Gram-negative bacteria and suggest that their antimicrobial activities also have to be tested when producing new compounds.

Hydrothermal integration of MoO2-MoS2@rGO nanoframe networks: A promising approach for efficient bacterial disinfection in wastewater

The efficient disinfection of bacterial contaminants in wastewater is a critical challenge in the field of environmental remediation. Herein, we present a novel approach for efficient bacterial disinfection using hydrothermally integrated MoO2-MoS2@rGO nanoframe networks. The developed nanoframe networks exhibit a unique architecture comprising of molybdenum dioxide (MoO2) and molybdenum disulfide (MoS2) impregnated on algae biomass reduced graphene oxide (rGO). The as-synthesized nanoframe networks demonstrate exceptional antibacterial activity against Escherichia coli bacteria. The disinfection efficiency was evaluated by measuring the bacterial viability and observing the morphological changes using scanning electron microscopy. The MoO2-MoS2@rGO nanoframe networks exhibited a remarkable antibacterial effect, achieving a high disinfection rate of 95.8% within a short contact time of 10 min. The efficient bacterial disinfection capability of the nanoframe networks can be attributed to the synergistic effects of MoO2, MoS2, and rGO components. The MoO2 nanoparticles generate reactive oxygen species (ROS), persuading oxidative stress and leading to bacterial inactivation. The MoS2 nanoparticles possess inherent antibacterial properties through the release of Mo and S ions. The rGO nanosheets provide a conductive and stable platform, facilitating the charge transfer during the antibacterial process. Furthermore, the hydrothermal integration method enables easy scalability and cost-effectiveness of the MoO2-MoS2@rGO nanoframe networks. The nanoframe networks can be easily recovered and reused, reducing waste generation and promoting sustainability. Overall, this study presents a promising approach for efficient bacterial disinfection in wastewater using hydrothermally integrated MoO2-MoS2@rGO nanoframe networks. The remarkable antibacterial performance, along with the advantages of scalability and reusability, makes these nanoframe networks a potential candidate for practical applications in environmental remediation and water treatment processes.

Osseointegration, antimicrobial capacity and cytotoxicity of implant materials coated with graphene compounds: A systematic review

The use of graphecs excellent mechanical properties. However, it is necessary to evaluate the biological effects of this material. This systematic review aimed to observe and understand through studies the current state of the art regarding osseointegration, antimicrobial capacity, and the cytotoxicity of graphene coating applied to the surface of dental implant materials. Searches in PubMed, Embase, Science Direct, Web of Science, and Google Scholar databases were conducted between June and July 2021 and updated in May 2022 using the keywords: graphene, graphene oxide, dental implants, zirconium, titanium, peek, aluminum, disilicate, methyl-methacrylate, cytotoxicity, osseointegration, and bone regeneration. The criteria included in vivo and in vitro studies that evaluated antimicrobial capacity and/or osseointegration and/or cytotoxicity of dental implant materials coated with graphene compounds. The risk of bias for in vitro studies was assessed by the JBI tool, and for in vivo studies, Syrcle's risk of bias tool for animal studies was used. The database search resulted in 176 articles. Of the 18 articles selected for full reading, 16 remained in this systematic review. The use of graphene compounds as coatings on the surface of implant materials is promising because it promotes osseointegration and has antimicrobial capacity. However, further studies are needed to ensure its cytotoxic potential.

Synthesis of copper-reduced graphene oxide nanomaterials using glucose and study of its antibacterial and anticancer activities

In this work, glucose-capped copper nanoparticles decorated reduced graphene oxide nanomaterial are synthesized at 100 °C and 200 °C via chemical reduction method and studied for their antibacterial and anticancer activities. Synthesized nanomaterials were characterized using x-ray diffraction, Fourier-transform infrared, transmission electron microscope, and RAMAN. It is observed in transmission electron microscopy and selected area electron diffraction studies that copper nanoparticles deposited onto reduced graphene oxide are smaller than nanoparticles generated in the absence of reduced graphene oxide. Also, the size of copper nanoparticles synthesized at 200 °C is smaller than at 100 °C. Results suggest that Cu/Glu/rGO synthesized at both temperatures showed significant antibacterial activity againstEscherichia coliandBacillus anthracis,similarly, showed significant cell death in cancer cell lines [Cal33 and HCT-116 p53 (+/+)]. Interestingly, the nanomaterials were seen to be more effective against the cancer cell lines harboring aggregating mutant p53. Tumors with aggregating mutants of p53 are difficult to treat hence, Cu/Glu/rGO can be promising therapeutic agents against these difficult cancers. However, the antibacterial and anticancer activity of Cu/Glu/rGO synthesized at 100 °C where Cu2O form is obtained was found to be more effective compared to Cu/Glu/rGO synthesized at 200 °C where Cu form is obtained. Though fine-tuning of the material may be required for its commercial applications.

Improving the Durability of Chitosan Films through Incorporation of Magnesium, Tungsten, and Graphene Oxides for Biomedical Applications

Bacterial infections that cause chronic wounds provide a challenge to healthcare worldwide because they frequently impede healing and cause a variety of problems. In this study, loaded with tungsten oxide (WO3 ), Magnesium oxide (MgO), and graphene oxide (GO) on chitosan (CS) membrane, an inexpensive polymer casting method was successfully prepared for wound healing applications. All fabricated composites were characterized by X-ray powder diffraction (XRD), Fourier transforms infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). A scanning electron microscope (SEM) was used to study the synthesized film samples' morphology as well as their microstructure. The formed WO3/MgO@CS shows a great enhancement in the UV/VIS analysis with a highly intense peak at 401 nm and a narrow band gap (3.69 eV) compared to pure CS. The enhanced electron-hole pair separation rate is responsible for the WO3/MgO/GO@CS scaffold's antibacterial activity. Additionally, human lung cells were used to determine the average cell viability of nanocomposite scaffolds and reached 121 % of WO3 /MgO/GO@CS nanocomposite, and the IC50 value was found to be 1654 μg/mL. The ability of the scaffold to inhibit the bacteria has been tested against both E. coli and S. aureus. The 4th sample showed an inhibition zone of 11.5±0.5 mm and 13.5±0.5 mm, respectively. These findings demonstrate the enormous potential for WO3 /MgO/GO@CS membrane as wound dressings in the clinical management of bacterially infected wounds.

Progress in Nanostructured Mechano-Bactericidal Polymeric Surfaces for Biomedical Applications

Bacterial infections and antibiotic resistance remain significant contributors to morbidity and mortality worldwide. Despite recent advances in biomedical research, a substantial number of medical devices and implants continue to be plagued by bacterial colonisation, resulting in severe consequences, including fatalities. The development of nanostructured surfaces with mechano-bactericidal properties has emerged as a promising solution to this problem. These surfaces employ a mechanical rupturing mechanism to lyse bacterial cells, effectively halting subsequent biofilm formation on various materials and, ultimately, thwarting bacterial infections. This review delves into the prevailing research progress within the realm of nanostructured mechano-bactericidal polymeric surfaces. It also investigates the diverse fabrication methods for developing nanostructured polymeric surfaces with mechano-bactericidal properties. We then discuss the significant challenges associated with each approach and identify research gaps that warrant exploration in future studies, emphasizing the potential for polymeric implants to leverage their distinct physical, chemical, and mechanical properties over traditional materials like metals.

Long-term application of silver nanoparticles in dental restoration materials: potential toxic injury to the CNS

Silver nanoparticles (AgNPs) have durable and remarkable antimicrobial effects on pathogenic microorganisms, such as bacteria and fungi, in dental plaques. As such, they are widely added to dental restoration materials, including composite resins, denture bases, adhesives, and implants, to solve the problems of denture stomatitis, peri-implant inflammation, and oral infection caused by the long-term use of these dental restoration materials. However, AgNPs can be absorbed into the blood circulatory system through the nasal/oral mucosa, lungs, gastrointestinal tract, skin, and other pathways and then distributed into the lungs, kidneys, liver, spleen, and testes, thereby causing toxic injury to these tissues and organs. It can even be transported across the blood-brain barrier (BBB) and continuously accumulate in brain tissues, causing injury and dysfunction of neurons and glial cells; consequently, neurotoxicity occurs. Other nanomaterials with antibacterial or remineralization properties are added to dental restoration materials with AgNPs. However, studies have yet to reveal the neurotoxicity caused by dental restoration materials containing AgNPs. In this review, we summarize the application of AgNPs in dental restoration materials, the mechanism of AgNPs in cytotoxicity and toxic injury to the BBB, and the related research on the accumulation of AgNPs to cause changes of neurotoxicity. We also discuss the mechanisms of neurotoxicity caused by AgNPs and the mode and rate of AgNPs released from dental restorative materials added with AgNPs to evaluate the probability of neurotoxic injury to the central nervous system (CNS), and then provide a theoretical basis for developing new composite dental restoration materials. Mechanism of neurotoxicity caused by AgNPs: AgNPs in the blood circulation enter the brain tissue after being transported across the BBB through transendothelial cell pathway and paracellular transport pathway, and continuously accumulate in brain tissue, causing damage and dysfunction of neurons and glial cells which ultimately leads to neurotoxicity. The uptake of AgNPs by neurons, astrocytes and microglia causes damage to these cells. AgNPs with non-neurotoxic level often increases the secretion of a variety of cytokines, up-regulates the expression of metallothionein in glial cells, even up-regulates autophagy and inflammation response to protect neurons from the toxic damage of AgNPs. However, the protective effect of glial cells induced by AgNPs exposure to neurotoxic levels is insufficient, which leads to neuronal damage and dysfunction and even neuronal programmed cell death, eventually cause neurotoxicity.

Effect of Graphene Oxide and Silver Nanoparticle Hybrid Composite on Acinetobacter baumannii Strains, Regarding Antibiotic Resistance and Prevalence of AMP-C Production

Background and Objectives: Growing antibiotic resistance among bacteria is a global issue that is becoming harder and more expensive to solve. Traditional treatment options are becoming less effective, causing more fatal outcomes of nosocomial infections. Since the development of new antibiotics has stagnated in the last decade, a novel approach is needed. Materials and Methods: Graphene-based materials are being developed and tested for various applications, and the medical field is no exception. We tested 98 clinical A. baumannii strains for antibiotic resistance, AMP-C production and the effectiveness of a graphene oxide and silver nanoparticle hybrid nanocomposite. The disc diffusion method was used to determine antibiotic susceptibility results. Antibiotic discs containing cefotaxime, cloxacillin and clavulanate were used to detect AMP-C production. The effectiveness of the GO-Ag hybrid nanocomposite was determined by counting colony forming units (CFUs) after a suspension of A. baumannii and the GO-Ag hybrid nanocomposite was plated on MH agar and incubated overnight to grow colonies. Results: In our research, we found that A. baumannii strains are resistant to the majority of commonly used antibiotics. Antibiotic resistance levels and AMP-C production can be factors, indicating the better effectiveness of the graphene oxide and silver nanoparticle hybrid nanocomposite. Conclusions: In this study, a GO-Ag hybrid nanocomposite was shown to have the potential to fight even the most problematic bacteria like A. baumannii.

Recent advances in nanomaterial-mediated bacterial molecular action and their applications in wound therapy

Because of the multi-pathway antibacterial mechanisms of nanomaterials, they have received widespread attention in wound therapy. However, owing to the complexities of bacterial responses toward nanomaterials, antibacterial molecular mechanisms remain unclear, making it difficult to rationally design highly efficient antibacterial nanomaterials. Fortunately, molecular dynamics simulations and omics techniques have been used as effective methods to further investigate the action targets of nanomaterials. Therefore, the review comprehensively analyzes the antibacterial mechanisms of nanomaterials from the morphology-dependent antibacterial activity and physicochemical/optical properties-dependent antibacterial activity, which provided guidance for constructing excellently efficient and broad-spectrum antibacterial nanomaterials for wound therapy. More importantly, the main molecular action targets of nanomaterials from the membranes, DNA, energy metabolism pathways, oxidative stress defense systems, ribosomes, and biofilms are elaborated in detail. Furthermore, nanomaterials used in wound therapy are reviewed and discussed. Finally, future directions of nanomaterials from mechanisms to nanomedicine are further proposed.

Polyether ether ketone coated with nanohydroxyapatite/graphene oxide composite promotes bioactivity and antibacterial activity at the surface of the material

Polyether ether ketone (PEEK) is considered an alternative material for manufacturing dental implants. However, PEEK lacks bioactivity and antibacterial action. In a series of experiments designed to enhance the surface properties of PEEK, we present a nanohydroxyapatite (nHA) and graphene oxide (GO) composite as a coating for PEEK-based dental implants to improve biological properties and antibacterial action. PEEK discs were polished, cleaned, and coated with the composite consisting of nHA particles doped with 0.75 wt% graphene oxide by a micro-emulsion technique according to patent US8,206,813. X-ray diffraction, field emission scanning electron microscopy-energy dispersive spectroscopy, and atomic force microscopy were utilized to characterize the composite coating. The wettability of the coated and non-coated samples was assessed by optical contact angle measurement. Antibacterial action of the composite coating was explored against S. aureus and E. coli and cytotoxicity determined utilizing osteoblast-like cells and gingival fibroblasts. The findings showed that the nHA/GO composite coating, approximately 1.3 μm thick, was homogenous with few micro-cracks and adhered to the PEEK surface. The surface roughness was reduced to 21.26 nm and the wettability was improved to 54.6⁰ after coating with the composite coating. Antibacterial activity was moderate, killing 99% of S. aureus and E. coli, with acceptable levels of cytotoxicity to mammalian osteoblast-like cells and gingival fibroblasts.

Injectable hydrogel based on silk fibroin/carboxymethyl cellulose/agarose containing polydopamine functionalized graphene oxide with conductivity, hemostasis, antibacterial, and anti-oxidant properties for full-thickness burn healing

Overcoming bacterial infections and promoting wound healing are significant challenges in clinical practice and fundamental research. This study developed a series of enzymatic crosslinking injectable hydrogels based on silk fibroin (SF), carboxymethyl cellulose (CMC), and agarose, with the addition of polydopamine functionalized graphene oxide (GO@PDA) to endow the hydrogel with suitable conductivity and antimicrobial activity. The hydrogels exhibited suitable gelation time, stable mechanical and rheological properties, high water absorbency, and hemostatic properties. Biocompatibility was also confirmed through various assays. After loading the antibiotic vancomycin hydrochloride, the hydrogels showed sustained release and good antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA). The fast gelation time and desirable tissue-covering ability of the hydrogels allowed for a good hemostatic effect in a rat liver trauma model. In a rat full-thickness burn wound model, the hydrogels exhibited an excellent treatment effect, leading to significantly enhanced wound closure, collagen deposition, and granulation tissue formation, as well as neovascularization and anti-inflammatory effects. In conclusion, the antibacterial electroactive injectable hydrogel dressing, with its multifunctional properties, significantly promoted the in vivo wound healing process, making it an excellent candidate for full-thickness skin wound healing.

Multi-functional conductive hydrogels based on heparin-polydopamine complex reduced graphene oxide for epidermal sensing and chronic wound healing

Flexible hydrogel sensors have expanded the applications of electronic devices due to their suitable mechanical properties and excellent biocompatibility. However, conventionally synthesized reduced graphene oxide (rGO) encounters limitations in reduction degree and dispersion, restricting the conductivity of graphene hydrogels and impeding the development of high-sensitivity flexible sensors. Moreover, hydrogels are susceptible to inflammation and bacterial infections, jeopardizing sensor stability over time. Thus, the challenge persists in designing conductive hydrogels that encompass high sensitivity, antibacterial efficacy, and anti-oxidative capabilities. In this study, GO was modified and reduced via a heparin-polydopamine (Hep-PDA) complex, yielding well-reduced and uniformly dispersed Hep-PDA-rGO nanosheets. Consequently, a hydrogel utilizing Hep-PDA-rGO was synthesized, showcasing commendable conductivity (3.63 S/m) and sensor performance, effectively applied in real-time motion monitoring. Notably, the hydrogel's attributes extend to facilitating chronic diabetic wound healing. It maintained a suitable inflammatory environment credited to its potent antibacterial and antioxidative properties, while its inherent conductivity promoted angiogenesis. The multifunctional nature of this hydrogel highlight its potential not only as an epidermal sensor but also as a promising dressing candidate for chronic wound treatment.

Exploring Nitrogen-Functionalized Graphene Composites for Urinary Catheter Applications

Graphene has been broadly studied, particularly for the fabrication of biomedical devices, owing to its physicochemical and antimicrobial properties. In this study, the antibiofilm efficacy of graphene nanoplatelet (GNP)-based composites as coatings for urinary catheters (UCs) was investigated. GNPs were functionalized with nitrogen (N-GNP) and incorporated into a polydimethylsiloxane (PDMS) matrix. The resulting materials were characterized, and the N-GNP/PDMS composite was evaluated against single- and multi-species biofilms of Staphylococcus aureus, Pseudomonas aeruginosa, and Klebsiella pneumoniae. Both biofilm cell composition and structure were analyzed. Furthermore, the antibacterial mechanisms of action of N-GNP were explored. The N-GNP/PDMS composite showed increased hydrophobicity and roughness compared to PDMS. In single-species biofilms, this composite significantly reduced the number of S. aureus, P. aeruginosa, and K. pneumoniae cells (by 64, 41, and 29%, respectively), and decreased S. aureus biofilm culturability (by 50%). In tri-species biofilms, a 41% reduction in total cells was observed. These results are aligned with the outcomes of the biofilm structure analysis. Moreover, N-GNP caused changes in membrane permeability and triggered reactive oxygen species (ROS) synthesis in S. aureus, whereas in Gram-negative bacteria, it only induced changes in cell metabolism. Overall, the N-GNP/PDMS composite inhibited biofilm development, showing the potential of these carbon materials as coatings for UCs.

Cellulose acetate membranes loaded with combinations of tetraphenylporphyrin, graphene oxide and Pluronic F-127 as responsive materials with antibacterial photodynamic activity

The development of polymeric fabrics with photoinduced antibacterial activity is important for different emerging applications, ranging from materials for medical and clinical practices to disinfection of objects for public use. In this work we prepared a series of cellulose acetate membranes, by means of phase inversion technique, introducing different additives in the starting polymeric solution. The loading of 5,10,15,20-tetraphenylporphyrin (TPP), a known photosensitizer, was considered to impart antibacterial photodynamic properties to the produced membranes. Besides, the addition of a surfactant (Pluronic F-127) allowed to modify the morphology of the membranes whereas the use of graphene oxide (GO) enabled further photo-activated antibacterial activity. The three additives were tested in various concentrations and in different combinations in order to carefully explore the effects of their mixing on the final photophysical and photodynamic properties. A complete structural/morphologycal characterization of the produced membranes has been performed, together with a detailed photophysical study of the TPP-containing samples, including absorption and emission features, excited state lifetime, singlet oxygen production, and confocal analysis. Their antibacterial activity has been assessed in vitro against S. aureus and E. coli, and the results demonstrated excellent bacterial inactivation for the membranes containing a combination of the three additives, revealing also a non-innocent role of the membrane porous structure in the final antibacterial capacity.

Effect of graphene on soybean root colonization by Bradyrhizobium strains

Legume crops such as soybean obtain a large portion of their nitrogen nutrition through symbiotic nitrogen fixation by diazotrophic rhizobia bacteria in root nodules. However, nodule occupancy by low-capacity nitrogen-fixing rhizobia can lead to lower-than-optimal levels of nitrogen fixation. Seed/root coating with engineered materials such as graphene-carrying biomolecules that may promote specific attraction/attachment of desirable bacterial strains is a potential strategy that can help overcome this rhizobia competition problem. As a first step towards this goal, we assessed the impact of graphene on soybean and Bradyrhizobium using a set of growth, biochemical, and physiological assays. Three different concentrations of graphene were tested for toxicity in soybean (50, 250, and 1,000 mg/l) and Bradyrhizobia (25, 50, and 100 mg/l). Higher graphene concentrations (250 mg/l and 1,000 mg/l) promoted seed germination but slightly delayed plant development. Spectrometric and microscopy assays for hydrogen peroxide and superoxide anion suggested that specific concentrations of graphene led to higher levels of reactive oxygen species in the roots. In agreement, these roots also showed higher activities of antioxidant enzymes, catalase, and ascorbate peroxidase. Conversely, no toxic effects were detected on Bradyrhizobia treated with graphene, and neither did they have higher levels of reactive oxygen species. Graphene treatments at 250 mg/l and 1,000 mg/l significantly reduced the number of nodules, but rhizobia infection and the overall nitrogenase activity were not affected. Our results show that graphene can be used as a potential vehicle for seed/root treatment.

Can Graphene Pave the Way to Successful Periodontal and Dental Prosthetic Treatments? A Narrative Review

Graphene, as a promising material, holds the potential to significantly enhance the field of dental practices. Incorporating graphene into dental materials imparts enhanced strength and durability, while graphene-based nanocomposites offer the prospect of innovative solutions such as antimicrobial dental implants or scaffolds. Ongoing research into graphene-based dental adhesives and composites also suggests their capacity to improve the quality and reliability of dental restorations. This narrative review aims to provide an up-to-date overview of the application of graphene derivatives in the dental domain, with a particular focus on their application in prosthodontics and periodontics. It is important to acknowledge that further research and development are imperative to fully explore the potential of graphene and ensure its safe use in dental practices.

Controllable synthesis of lignin nanoparticles with antibacterial activity and analysis of its antibacterial mechanism

As a kind of polyphenol substance, lignin is considered to have good biological activity and certain antibacterial properties. However, it is difficult to be applied because of its uneven molecular weight and difficulty in separation. In this study, by way of fractionation and antisolvent, we obtained lignin fractions with different molecular weight. Moreover, we increased the content of active functional groups and regulated microstructure of lignin, thereby increased lignin's antibacterial property. The classification of chemical components and the control of particle morphology also provided convenience for the exploration of lignin's antibacterial mechanism. The results showed that acetone with high hydrogen bonding ability could collect lignin with different molecular weights and increase the content of phenolic hydroxyl groups, up to 31.2 %. By adjusting the ratio of water/solvent (v/v) and stirring rate during the process of antisolvent, lignin nanoparticles (sphere 40-300 nm) with regular shape and uniform size can be obtained. Through observing the distribution of lignin nanoparticles in vivo and in vitro after co-incubation for different time, it could be found that lignin nanoparticles firstly damage structural integrity of bacterial cells externally, and then are swallowed into cells to affect their protein synthesis, which constitutes a dynamic antibacterial process.

Potential of graphene-based nanomaterials for cardiac tissue engineering

Cardiovascular diseases are the primary cause of death worldwide. Despite significant advances in pharmacological treatments and surgical interventions to restore heart function after myocardial infarction, it can progress to heart failure due to the restricted inherent potential of adult cardiomyocytes to self-regenerate. Hence, the evolution of new therapeutic methods is critical. Nowadays, novel approaches in tissue engineering have assisted in restoring biological and physical specifications of the injured myocardium and, hence, cardiac function. The incorporation of a supporting matrix that could mechanically and electronically support the heart tissue and stimulate the cells to proliferate and regenerate will be advantageous. Electroconductive nanomaterials can facilitate intracellular communication and aid synchronous contraction via electroactive substrate creation, preventing the issue of arrhythmia in the heart. Among a wide range of electroconductive materials, graphene-based nanomaterials (GBNs) are promising for cardiac tissue engineering (CTE) due to their outstanding features including high mechanical strength, angiogenesis, antibacterial and antioxidant properties, low cost, and scalable fabrication. In the present review, we discuss the effect of applying GBNs on angiogenesis, proliferation, and differentiation of implanted stem cells, their antibacterial and antioxidant properties, and their role in improving the electrical and mechanical properties of the scaffolds for CTE. Also, we summarize the recent research that has applied GBNs in CTE. Finally, we present a concise discussion on the challenges and prospects.

The Comparative Toxic Impact Assessment of Carbon Nanotubes, Fullerene, Graphene, and Graphene Oxide on Marine Microalgae Porphyridium purpureum

The growing production and application of carbon-based nanomaterials (CNMs) represent possible risks for aquatic systems. However, the variety of CNMs with different physical and chemical properties and different morphology complicate the understanding of their potential toxicity. This paper aims to evaluate and compare the toxic impact of the four most common CNMs, namely multiwalled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO) on the marine microalgae Porphyridium purpureum. The microalgae cells were exposed to the CNMs for 96 h and measured by flow cytometry. Based on the obtained results, we determined no observed effect level (NOEL), and calculated EC10 and EC50 concentrations for growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species (ROS) generation changes for each tested CNM. According to the sensitivity (growth rate inhibition) of P. purpureum, the used CNMs can be listed in the following order (EC50 in mg/L, 96 h): CNTs (2.08) > GrO (23.37) > Gr (94.88) > C60 (>131.0). The toxicity of CNTs was significantly higher than the toxic effect of the other used CNMs, and only this sample caused an increase in ROS generation in microalgae cells. This effect was apparently caused by the high affinity between particles and microalgae associated with the presence of exopolysaccharide coverage on P. purpureum cells.

Recent advances and mechanism of antimicrobial efficacy of graphene-based materials: a review

Graphene-based materials have undergone substantial investigation in recent years owing to their wide array of physicochemical characteristics. Employment of these materials in the current state, where infectious illnesses caused by microbes have severely damaged human life, has found widespread application in combating fatal infectious diseases. These materials interact with the physicochemical characteristics of the microbial cell and alter or damage them. The current review is dedicated to molecular mechanisms underlying the antimicrobial property of graphene-based materials. Various physical and chemical mechanisms leading to cell membrane stress, mechanical wrapping, photo-thermal ablation as well as oxidative stress exerting antimicrobial effect have also been thoroughly discussed. Furthermore, an overview of the interactions of these materials with membrane lipids, proteins, and nucleic acids has been provided. A thorough understanding of discussed mechanisms and interactions is essential to develop extremely effective antimicrobial nanomaterial for application as an antimicrobial agent.

Graphical abstract

Enhancement of antibacterial properties and biocompatibility of Ti6Al4V by graphene oxide/strontium nanocomposite electrodepositing

Ti₆Al₄V is a widely used orthopedic implant material in clinics. Due to its poor antibacterial properties, surface modification is required to prevent peri-implantation infection. However, chemical linkers used for surface modification have generally been reported to have detrimental effects on cell growth. In this work, by optimizing parameters related to electrodeposition, a composite structural coating with graphene oxide (GO) compact films in the inner layer and 35 nm diameter strontium (Sr) nanoparticles in the outer layer was constructed on the surface of Ti₆Al₄V without using substance harmful to bone marrow mesenchymal stem cells (BMSCs) growth. The antibacterial properties of Ti₆Al₄V are enhanced by the controlled release of Sr ions and incomplete masking of the GO surface, showing excellent antibacterial activity against Staphylococcus aureus in bacterial culture assays. The biomimetic GO/Sr coating has a reduced roughness of the implant surface and a water contact angle of 44.1°, improving the adhesion, proliferation and differentiation of BMSCs. Observations of synovial tissue and fluid in the joint in an implantation model of rabbit knee also point to the superior anti-infective properties of the novel GO/Sr coating. In summary, the novel GO/Sr nanocomposite coating on the surface of Ti₆Al₄V effectively prevents surface colonization of Staphylococcus aureus and eliminates local infections in vitro and in vivo.

The antimicrobial efficacy of nanographene oxide and double antibiotic paste per se and in combination: part II

BACKGROUND

Finding strategies to overcome the rising trends of antimicrobial resistance against currently available antimicrobial agents has become increasingly relevant. Graphene oxide has recently emerged as a promising material due to its outstanding physicochemical and biological properties. This study aimed to validate previous data on the antibacterial activity of nanographene oxide (nGO), double antibiotic paste (DAP), and their combination (nGO-DAP).

METHODS

The antibacterial evaluation was performed against a wide range of microbial pathogens. Synthesis of nGO was achieved using a modified Hummers' method, and loading it with ciprofloxacin and metronidazole resulted in nGO-DAP. The microdilution method was utilized to assess the antimicrobial efficacy of nGO, DAP, and nGO-DAP against two gram-positive bacteria (S. aureus and E. faecalis), two gram-negative bacteria (E. coli, and S. typhi), and an opportunistic pathogenic yeast (C. albicans). Statistical analysis was conducted using one-sample t-test and one-way ANOVA (α = 0.05).

RESULTS

All three antimicrobial agents significantly increased the killing percent of microbial pathogens compared to the control group (P < 0.05). Furthermore, the synthesized nGO-DAP exhibited higher antimicrobial activity than nGO and DAP per se.

CONCLUSION

The novel synthesized nGO-DAP can be used as an effective antimicrobial nanomaterial for use in dental, biomedical, and pharmaceutical fields against a range of microbial pathogens, including gram-negative and gram-positive bacteria, as well as yeasts.

Graphene in nanomedicine: A review on nano-bio factors and antibacterial activity

Graphene-based nanomaterials possess potent antibacterial activity and have engrossed immense interest among researchers as an active armour against pathogenic microbes. A comprehensive perception of the antibacterial activity of these nanomaterials is critical to the fabrication of highly effective antimicrobial nanomaterials, which results in highly efficient and enhanced activity. These materials owing to their antimicrobial activity are utilized as nanomedicine against various pathogenic microbes. The present article reviews the antimicrobial activity of graphene and its analogs such as graphene oxide, reduced graphene oxide as well as metal, metal oxide and polymeric composites. The review draws emphasis on the effect of various nano-bio factors on the antibacterial capability. It also provides an insight into the antibacterial properties of these materials along with a brief discussion on the discrepancies in their activities as evidenced by the scientific communities. In this way, the review is expected to shed light on future research and development in graphene-based nanomedicine.

Sugarcane leave-derived cellulose nanocrystal/graphene oxide filter membrane for efficient removal of particulate matter

The goal of this study is to isolate cellulose nanocrystals (CNC) from sugarcane leaves (SCL) and fabricate filter membranes. Filter membranes consisting of the CNC and varying amount graphene oxide (GO) were fabricated using vacuum filtration technique. The α-cellulose content increased from 53.56 ± 0.49 % in untreated SCL to 78.44 ± 0.56 % and 84.99 ± 0.44 % in steam-exploded and bleached fibers, respectively. Atomic force microscopy (AFM) and transmission electron microscope (TEM) of CNC isolated from SCL indicated nanosized particles in the range of 7.3 nm and 150 nm for diameter and length, respectively. Morphologies of the fiber and CNC/GO membranes were determined by scanning electron microscopy (SEM) and crystallinity by X-ray diffraction (XRD) analysis of crystal lattice. The crystallinity index of CNC decreased with the addition of GO into the membranes. The CNC/GO-2 recorded the highest tensile index of 3.001 MPa. The removal efficiency increases with increasing GO content. The highest removal efficiency of 98.08 % was recorded for CNC/GO-2. CNC/GO-2 membrane reduced growth of Escherichia coli to 65 CFU compared to >300 CFU of control sample. SCL is a potential bioresource for isolation of cellulose nanocrystals and fabrication of high-efficiency filter membrane for particulate matter removal and inhibition of bacteria.

An intumescent flame-retardant system based on carboxymethyl cellulose for flexible polyurethane foams with outstanding flame retardancy, antibacterial properties, and mechanical properties

A novel and eco-friendly intumescent flame-retardant system based on sodium carboxymethyl cellulose (CMC) was established for wide-used flexible polyurethane foams (FPUFs). FPUF-(APP₆CMC₁)GN₁ with extremely uniform coatings extinguished and reached the UL-94 V-0 rating, and presented an improvement of thermal insulation properties. Moreover, there was a 58 % reduction in peak heat release rate for FPUF-(APP₆CMC₁)GN₁ compared with that of FPUF, and the microstructure analysis of char residues indicated that a perfect intumescent char layer had formed on the surface of FPUFs. Especially, CMC and GN enhanced the compactness and stability of char layers. Therefore, little volatile production was generated under the protection of physical layers in the high temperature as evaluated during the thermal degradation processes. Meanwhile, the flame-retardant FPUFs remained the ideal mechanical properties and obtained excellent antibacterial properties, and the antibacterial rates of E.coli and S.aureus were 99.9 % (FPUF-(APP₆CMC₁)GN₁). This work provides an eco-friendlier strategy for the design of multi-function FPUFs.

Plasma-Derived Fibrin Hydrogels Containing Graphene Oxide for Infections Treatment

Wound infection is inevitable in most patients suffering from extensive burns or chronic ulcers, and there is an urgent demand for the production of bactericidal dressings to be used as grafts to restore skin functionalities. In this context, the present study explores the fabrication of plasma-derived fibrin hydrogels containing bactericidal hybrids based on graphene oxide (GO). The hydrogels were fully characterized regarding gelation kinetics, mechanical properties, and internal hydrogel structures by disruptive cryo scanning electron microscopies (cryo-SEMs). The gelation kinetic experiments revealed an acceleration of the gel formation when GO was added to the hydrogels in a concentration of up to 0.2 mg/mL. The cryo-SEM studies showed up a decrease of the pore size when GO was added to the network, which agreed with a faster area contraction and a higher compression modulus of the hydrogels that contained GO, pointing out the critical structural role of the nanomaterial. Afterward, to study the bactericidal ability of the gels, GO was used as a carrier, loading streptomycin (STREP) on its surface. The loading content of the drug to form the hybrid (GO/STREP) resulted in 50.2% ± 4.7%, and the presence of the antibiotic was also demonstrated by Raman spectroscopy, Z-potential studies, and thermogravimetric analyses. The fibrin-derived hydrogels containing GO/STREP showed a dose-response behavior according to the bactericidal hybrid concentration and allowed a sustained release of the antibiotic at a programmed rate, leading to drug delivery over a prolonged period of time.

Graphene@Curcumin-Copper Paintable Coatings for the Prevention of Nosocomial Microbial Infection

The rise of antimicrobial resistance has brought into focus the urgent need for the next generation of antimicrobial coating. Specifically, the coating of suitable antimicrobial nanomaterials on contact surfaces seems to be an effective method for the disinfection/contact killing of microorganisms. In this study, the antimicrobial coatings of graphene@curcumin-copper (GN@CR-Cu) were prepared using a chemical synthesis methodology. Thus, the prepared GN@CR-Cu slurry was successfully coated on different contact surfaces, and subsequently, the GO in the composite was reduced to graphene (GN) by low-temperature heating/sunlight exposure. Scanning electron microscopy was used to characterize the coated GN@CR-Cu for the coating properties, X-ray photon scattering were used for structural characterization and material confirmation. From the morphological analysis, it was seen that CR and Cu were uniformly distributed throughout the GN network. The nanocomposite coating showed antimicrobial properties by contact-killing mechanisms, which was confirmed by zone inhibition and scanning electron microscopy. The materials showed maximum antibacterial activity against E. coli (24 ± 0.50 mm) followed by P. aeruginosa (18 ± 0.25 mm) at 25 µg/mL spot inoculation on the solid media plate, and a similar trend was observed in the minimum inhibition concentration (80 µg/mL) and bactericidal concentration (160 µg/mL) in liquid media. The synthesized materials showed excellent activity against E. coli and P. aeruginosa. These materials, when coated on different contact surfaces such medical devices, might significantly reduce the risk of nosocomial infection.

Impact of graphene oxide lateral dimensions on the properties of methacrylated gelatin nanocomposite hydrogels

The size and shape of nanoparticles have a profound effect on the properties of nanocomposites. For instance, the lateral dimensions of graphene oxide (GO) platelets affect several properties, including their antibacterial and pharmacokinetic functions. However, the impact of lateral dimensions has been poorly studied in nanocomposites, and their effect on hydrogels is still unknown. The current study aims to determine the effect of GO lateral dimensions on the mechanical, rheological, thermal, and antibacterial properties of gelatin hydrogels. The hydrogels were fabricated via photopolymerization of methacrylated gelatin and GO derived from the oxidation of commercial graphene. The observations indicate that an increase in GO sheets improves the mechanical strength with an increase in compressive modulus and a low mechanical hysteresis (<10%). Furthermore, low mechanical energy is dissipated even after several deformation cycles. The nanocomposite hydrogels demonstrated bactericidal effects on two clinical strains with an extensively drug-resistant phenotype, primarily through contact. Additionally, an increment in lateral dimensions increased the bactericidal capacity of Gram-negative strains. Thus, the significant effect of the lateral dimensions of GO sheets on the properties of hydrogels is demonstrated.

Sensor to Electronics Applications of Graphene Oxide through AZO Grafting

Graphene is a two-dimensional (2D) material with a single atomic crystal structure of carbon that has the potential to create next-generation devices for photonic, optoelectronic, thermoelectric, sensing, wearable electronics, etc., owing to its excellent electron mobility, large surface-to-volume ratio, adjustable optics, and high mechanical strength. In contrast, owing to their light-induced conformations, fast response, photochemical stability, and surface-relief structures, azobenzene (AZO) polymers have been used as temperature sensors and photo-switchable molecules and are recognized as excellent candidates for a new generation of light-controllable molecular electronics. They can withstand trans-cis isomerization by conducting light irradiation or heating but have poor photon lifetime and energy density and are prone to agglomeration even at mild doping levels, reducing their optical sensitivity. Graphene derivatives, including graphene oxide (GO) and reduced graphene oxide (RGO), are an excellent platform that, combined with AZO-based polymers, could generate a new type of hybrid structure with interesting properties of ordered molecules. AZO derivatives may modify the energy density, optical responsiveness, and photon storage capacity, potentially preventing aggregation and strengthening the AZO complexes. They are potential candidates for sensors, photocatalysts, photodetectors, photocurrent switching, and other optical applications. This review aimed to provide an overview of the recent progress in graphene-related 2D materials (Gr2MS) and AZO polymer AZO-GO/RGO hybrid structures and their synthesis and applications. The review concludes with remarks based on the findings of this study.

Laser-Induced Graphene Capacitive Killing of Bacteria

Laser-induced graphene (LIG) is a method of generating a foam-like conformal carbon layer of porous graphene on many types of carbon-based surfaces. This electrically conductive material has been shown to be useful in many applications including environmental technology and includes low fouling and antimicrobial surfaces and can address persistent environmental challenges spawned by bacterial and viral contaminates. Here, we show that a single film of LIG stores charge when an electrical current is applied and dissipates charge when the current is stopped, which results in electricidal surface antibacterial potency. The amount of accumulated and dissipated charge on a single strip of LIG was quantified with an electrometer by generating LIG on both sides of a nonconducting polyimide film, which showed up to 65 pC of charge when the distance between the surfaces was 94 μm corresponding to an areal capacitance of 1.63 pF/cm². We further corroborate the stored charge decay of a single LIG strip with bacteria death via direct electrical contact. Antimicrobial rates decreased with the same monotonic pattern as the loss of charge from the LIG film (i.e., AR ∼ 97% 0 s after voltage source disconnection vs AR ∼ 21% 90 s after disconnection) showing bacterial death as a function of delayed LIG exposure time after applied voltage disconnection. In terms of energy efficiency, this translates to an increased bacteria potency of ∼170% for the equivalent energy costs as that previously estimated. Finally, we present a mechanistic explanation for the capacitive behavior and the electricidal effects for a single plate of LIG.

Graphene-Based Materials in Dental Applications: Antibacterial, Biocompatible, and Bone Regenerative Properties

Graphene-based materials have been shown to have advantageous properties in biomedical and dental applications due to their high mechanical, physiochemical, antibacterial, and stem cell differentiating properties. Although graphene-based materials have displayed appropriate biocompatible properties when used in implant materials for orthopedic applications, little research has been performed to specifically test the biocompatibility of graphene for dental applications. The oral environment, compared to the body, varies greatly and must be considered when evaluating biocompatibility requirements for dental applications. This review will discuss in vitro and in vivo studies that assess graphene's cytotoxicity, antibacterial properties, and cell differentiation ability to evaluate the overall biocompatibility of graphene-based materials for dental applications. Particle shape, size, and concentration were found to be major factors that affected overall biocompatibility of graphene.