Evaluation and Comparison of Solid Lipid Nanoparticles (SLNs) and Nanostructured Lipid Carriers (NLCs) as Vectors to Develop Hydrochlorothiazide Effective and Safe Pediatric Oral Liquid Formulations

Optimized Nanostructured Lipid Carriers for Metformin: Enhanced Anti-Inflammatory Activity and Protection Against Type 2 Diabetes-Induced Organ Damage

Background

Diabetes is a chronic metabolic disease that causes serious consequences in different organs such as the heart, kidneys, pancreas, and liver. Metformin (MTF) is a common treatment for type 2 diabetes. It controls the blood glucose level by improving insulin sensitivity and glucose absorption. MTF belongs to BCS class III, which is characterized by high solubility and low permeability. Several types of nanoparticles have been developed to overcome the permeability problem of MTF.

Methods

In this study, we prepared nanostructured lipid carriers (NLCs) loaded with metformin (MTF) using hot melt homogenization-ultrasonication. To select the best formulation, the prepared MTF-NLCs were evaluated for entrapment efficiency % (EE%), particle size, zeta potential, polydispersity index (PDI), and in vitro drug release. The optimized formulation was selected based on the high EE%, small particle size, high absolute zeta potential, low polydispersity index, and high in vitro drug release. The optimized formulation was evaluated for surface morphology by transmission electron microscope (TEM) and for further biochemical and histological analyses in a high-fat diet-induced type 2 diabetes mellitus (T2DM) in vivo rat model; HFD was administered (44.3-kJ/kg total energy) for four weeks, followed by a single intraperitoneal injection of streptozotocin (STZ). Rats were allocated into four groups; Diabetic (DM), DM+MTF, DM+MTF-NLC, and control group. Serum and tissue samples were processed for inflammatory markers detection and histopathology.

Results

The prepared MTF-NLC formulation exhibited high EE% (80.65 ± 1.95% to 99.31 ± 3.25%), small particle size (247.72±5.74nm-503.23±7.26nm), high negative zeta potential (from -31.83‎±‎0.98mV to -51.6‎±‎2.64mV), PDI value less than 0.5 for all MTF-NLCs, and controlled drug release. MTF-NLC7 appeared spherical when examined by TEM. MTF and MTF-NLC groups significantly alleviated the degenerative effects of DM in both submandibular glands (SMG) and pancreas. Additionally, treatments improved kidney and liver function reduced serum inflammatory cytokines, and tissue SMG and pancreatic immunostaining of inflammatory cytokines with favorable effects of MTF-NLCs. Moreover, the MTF-NLCs showed a significant reduction of serum inflammatory cytokines, including (TNF-α and IL-1β) and pancreatic TNF-α expression, in addition to ameliorating liver and renal functions compared to MTF alone.

Conclusion

The preparation of MTF as NLCs improved its permeability, enhancing its anti-inflammatory activity and providing more protection against diabetes-induced organ injury.

Optimized and Functionalized Carvacrol-Loaded Nanostructured Lipid Carriers for Enhanced Cytotoxicity in Breast Cancer Cells

Background/Objectives: Carvacrol, a monoterpenoid phenol found in essential oils, exhibits many biological activities, including anticancer properties through mechanisms such as induction of apoptosis. These properties can be enhanced if encapsulated within nanoparticles. This study focuses on producing functionalized carvacrol-loaded nanostructured lipid carriers (NLCs) applied to the treatment of breast cancer. Methods: NLCs were produced by hot emulsification with the sonication method and optimized by the Box-Behnken design, considering Precirol® (1, 4, 7%), carvacrol (1, 5, 9%), and Tween® (0.1, 0.5, 0.9%) as independent variables. Results: The optimized NLC containing 2% carvacrol had a particle size of 111 ± 2 nm, PdI of 0.26 ± 0.01, and zeta potential of -24 ± 0.8 mV. The solid lipid (Precirol®) was the variable that most influenced particle size. NLCs were functionalized with Pluronic® F68, cholesterol, chitosan, and polyethylene glycol (0.05-0.2%), with oNLC-Chol presenting the most promising results, with no significant increase in particle size (±12 nm) and high encapsulation efficiency (98%). Infrared spectra confirm effective carvacrol encapsulation, and stability tests showed no significant physicochemical changes for 120 days of storage at 4 °C. When incubated with albumin (5 mg/mL), NLCs showed overall good stability over 24 h, except for oNLC-Chol, which increased slightly in size after 24 h. In addition, oNLC increased the cytotoxic effect of carvacrol by 12-fold, resulting in an IC50 of 7 ± 1 μg/mL. Conclusions: Therefore, it was possible to produce stable, homogeneous NLCs with nanometric sizes containing 2% carvacrol that displayed improved anticancer efficacy, indicating their potential as a delivery system.

Experimental approaches to evaluate solid lipid nanoparticle-based drug delivery systems

Solid lipid nanoparticles (SLNs) are potential drug carriers due to the several advantages they offer. The physicochemical stability of lipid carriers varies significantly due to their diverse compositions and structures. Appropriate analytical methods are required for the complete characterization of SLNs. Physicochemical characterization includes analysis of bulk properties like particle size, size distribution, zeta potential, morphology, stability, polymorphism, crystallinity, and molecular level properties like microenvironments within nanoparticles and their interactions with drugs. Moreover, drug loading, drug entrapment efficiency, and drug release kinetics are essential parameters to evaluate the efficacy of SLNs as drug delivery systems. In addition to testing the physicochemical stability and functionality of SLN formulations, it is essential to investigate their desired actions through in vivo studies, which are beyond the scope of this article. This review briefly discusses the different experimental techniques and their applications in the field of solid lipid nanoparticles. These techniques can also be used to characterize nanostructure lipid carriers, which are second-generation lipid nanoparticles.

Nanostructured lipid carriers for enhanced batimastat delivery across the blood-brain barrier: an in vitro study for glioblastoma treatment

Glioblastoma presents a significant treatment challenge due to the blood-brain barrier (BBB) hindering drug delivery, and the overexpression of matrix metalloproteinases (MMPs), which promotes tumor invasiveness. This study introduces a novel nanostructured lipid carrier (NLC) system designed for the delivery of batimastat, an MMP inhibitor, across the BBB and into the glioblastoma microenvironment. The NLCs were functionalized with epidermal growth factor (EGF) and a transferrin receptor-targeting construct to enhance BBB penetration and entrapment within the tumor microenvironment. NLCs were prepared by ultrasonicator-assisted hot homogenization, followed by surface functionalization with EGF and the construct though carbodiimide chemistry. The construct was successfully conjugated with an efficiency of 81%. Two functionalized NLC formulations, fMbat and fNbat, differing in the surfactant amount, were characterized. fMbat had a size of 302 nm, a polydispersity index (PDI) of 0.298, a ζ-potential (ZP) of -27.1 mV and an 85% functionalization efficiency (%FE), whereas fNbat measured 285 nm, with a PDI of 0.249, a ZP of -28.6 mV and a %FE of 92%. Both formulations achieved a drug loading of 0.42 μg/mg. In vitro assays showed that fNbat was cytotoxic and failed to cross the BBB, while fMbat showed cytocompatibility at concentrations 10 times higher than the drug's IC50. Additionally, fMbat inhibited MMP-2 activity between 11 and 62% across different cell lines and achieved a three-fold increase in BBB penetration upon functionalization. Our results suggest that the fMbat formulation has potential for enhancing GB treatment by overcoming current drug delivery limitations and may be combined with other therapeutic strategies for improved outcomes.

Elucidating the uptake and trafficking of nanostructured lipid carriers as delivery systems for miRNA

Cationic nanostructured lipid carriers (cNLCs) represent promising non-viral carriers for nucleic acids, such as miRNAs, forming stable self-assembled miRNA complexes due to electrostatic interactions. Prepared by high-pressure homogenization, cNLC formulations, both with and without Nile Red dye demonstrated stable particle sizes in the range of 100-120 nm and positive surface charges (>30 mV), which are necessary for effective cellular uptake. The miRNA complexes formed at mass ratios of 1:2.5 and 1:5 showed similar stability and size, with positive zeta potentials, as well as high cell viability (> 80 %) in 3T3-L1 and MCF-7 cell lines. The cellular uptake studies of miRNA:cNLC complexes in both cell lines revealed that uptake was time- and concentration-dependent, with rapid initial uptake in 30 min and a zig-zag pattern over 24 h. To elucidate the endocytosis mechanism of miRNA:cNLC complexes, 3T3-L1 and MCF-7 cells were incubated with different inhibitors (chlorpromazine, 5-[N-ethyl-N-isopropyl] amiloride, dynasore, nystatin, or sodium azide with 2-deoxy-d-glucose). Results showed significant inhibition of uptake at low temperatures and with ATP depletion, suggesting endocytosis, particularly macropinocytosis, as the main uptake mechanism in 3T3-L1 cells. In MCF-7 cells, the uptake was less inhibited by the substances, indicating the need for more specific methods to fully decipher the endocytic mechanisms involved. Confocal laser scanning microscopy images revealed that the complexes are internalized in vesicles, and are primarily localized in the juxtanuclear region, suggesting trafficking through the endolysosomal system. Colocalization study with LysoTracker™ Green DND-26 showed significant colocalization of miRNA:cNLC complexes with lysosomes in 3T3-L1 cells, indicating trafficking through the endolysosomal system. In MCF-7 cells, colocalization was lower, suggesting macropinocytosis as the primary uptake mechanism. Additional studies showed partial colocalization between labeled NLCs and miRNA, indicating that about 50 % of miRNA is released from NLCs within 30 min post-transfection.

A Review on Lipid-based Nanoformulations for Targeting Brain through Non-invasive Nasal Route

The nasal method for administering nanoformulations to the brain has been examined and proven successful by prior investigators. For the treatment of central nervous system (CNS) disorders such as neuropsychiatric, depression, Alzheimer and anxiety, intranasal administration has become more popular for delivering drugs to the brain. This method offers direct transport through neuronal pathways. The lipid-based nanocarriers like nanostructured lipid carriers (NLC) appear more favorable than other nanosystems for brain administration. The nanostructured lipid carriers (NLC) system can quickly transform into a gelling system to facilitate easy administration into the nasal passages. The various compatibility studies showed that the other lipid structured-based formulations may not work well for various reasons, including a low drug filing capacity; during storage, the formulation showed changes in the solid lipid structures, which gives a chance of medication ejection. Formulations containing NLC can minimize these problems by improving drug solubility and permeation rate by incorporating a ratio of liquid lipids with solid lipids, resulting in improved stability during storage and drug bioavailability because of the higher drug loading capacity. This review aimed to find and emphasize research on lipid-based nanocarrier formulations that have advanced the treatment of central nervous system illnesses using nasal passages to reach the targeted area's drug molecules.

Are Nanostructured Lipid Carriers (NLC) better than Solid Lipid Nanoparticles (SLN) for delivering abiraterone acetate through the gastrointestinal tract?

Abiraterone acetate (AbA) is a progesterone derivative indicated for the treatment of metastatic prostate cancer. This BCS (Biopharmaceutics Classification System) Class IV molecule has an extremely poor oral bioavailability (<10 %), notably due to its very low water solubility and intestinal permeability. Among the few existing galenic strategies to improve AbA's oral bioavailability, lipid nanoparticles such as Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) are relevant nanovectors. The objective of this study is to develop and compare SLN and NLC for oral delivery of abiraterone acetate. Both SLN and NLC are biocompatible, biodegradable and produced by high pressure homogenization (HPH), an ecological-friendly manufacturing process, organic solvent-free and easily scalable. The HPH process allowed the formation of AbA-loaded SLN and NLC with particle size lower than 160 nm and high encapsulation efficiencies. The addition of a liquid lipid significantly reduced the mean diameter of the nanoparticles, reflecting the greater benefit of the NLC formulation compared to SLN. Both SLN and NLC formulations offered an important protection of AbA in intestinal media, with a better stability for NLC. When encapsulated in SLN or NLC, the AbA is strongly retained by the nanoparticles, whatever the dissolution medium, which means that both formulas are able to protect and retain the drug in the intestinal tract, right up to its delivery to the enterocytes surface. High concentrations of nanoparticles were administered without cytotoxicity, especially for the NLC, which provides a real added value in terms of biocompatibility with Caco-2 cells. Finally, the nanoparticles were able to penetrate into enterocytes by the transcellular route, demonstrating an intense cellular internalization.

Solubilization techniques used for poorly water-soluble drugs

About 40% of approved drugs and nearly 90% of drug candidates are poorly water-soluble drugs. Low solubility reduces the drugability. Effectively improving the solubility and bioavailability of poorly water-soluble drugs is a critical issue that needs to be urgently addressed in drug development and application. This review briefly introduces the conventional solubilization techniques such as solubilizers, hydrotropes, cosolvents, prodrugs, salt modification, micronization, cyclodextrin inclusion, solid dispersions, and details the crystallization strategies, ionic liquids, and polymer-based, lipid-based, and inorganic-based carriers in improving solubility and bioavailability. Some of the most commonly used approved carrier materials for solubilization techniques are presented. Several approved poorly water-soluble drugs using solubilization techniques are summarized. Furthermore, this review summarizes the solubilization mechanism of each solubilization technique, reviews the latest research advances and challenges, and evaluates the potential for clinical translation. This review could guide the selection of a solubilization approach, dosage form, and administration route for poorly water-soluble drugs. Moreover, we discuss several promising solubilization techniques attracting increasing attention worldwide.

State of the art in pediatric nanomedicines

In recent years, the continuous development of innovative nanopharmaceuticals is expanding their biomedical and clinical applications. Nanomedicines are being revolutionized to circumvent the limitations of unbound therapeutic agents as well as overcome barriers posed by biological interfaces at the cellular, organ, system, and microenvironment levels. In many ways, the use of nanoconfigured delivery systems has eased challenges associated with patient differences, and in our opinion, this forms the foundation for their potential usefulness in developing innovative medicines and diagnostics for special patient populations. Here, we present a comprehensive review of nanomedicines specifically designed and evaluated for disease management in the pediatric population. Typically, the pediatric population has distinguishing needs relative to those of adults majorly because of their constantly growing bodies and age-related physiological changes, which often need specialized drug formulation interventions to provide desirable therapeutic effects and outcomes. Besides, child-centric drug carriers have unique delivery routes, dosing flexibility, organoleptic properties (e.g., taste, flavor), and caregiver requirements that are often not met by traditional formulations and can impact adherence to therapy. Engineering pediatric medicines as nanoconfigured structures can potentially resolve these limitations stemming from traditional drug carriers because of their unique capabilities. Consequently, researchers from different specialties relentlessly and creatively investigate the usefulness of nanomedicines for pediatric disease management as extensively captured in this compilation. Some examples of nanomedicines covered include nanoparticles, liposomes, and nanomicelles for cancer; solid lipid and lipid-based nanostructured carriers for hypertension; self-nanoemulsifying lipid-based systems and niosomes for infections; and nanocapsules for asthma pharmacotherapy.

Innovative Pharmaceutical Techniques for Paediatric Dosage Forms: A Systematic Review on 3D Printing, Prilling/Vibration and Microfluidic Platform

The production of paediatric pharmaceutical forms represents a unique challenge within the pharmaceutical industry. The primary goal of these formulations is to ensure therapeutic efficacy, safety, and tolerability in paediatric patients, who have specific physiological needs and characteristics. In recent years, there has been a significant increase in attention towards this area, driven by the need to improve drug administration to children and ensure optimal and specific treatments. Technological innovation has played a crucial role in meeting these requirements, opening new frontiers in the design and production of paediatric pharmaceutical forms. In particular, three emerging technologies have garnered considerable interest and attention within the scientific and industrial community: 3D printing, prilling/vibration, and microfluidics. These technologies offer advanced approaches for the design, production, and customization of paediatric pharmaceutical forms, allowing for more precise dosage modulation, improved solubility, and greater drug acceptability. In this review, we delve into these cutting-edge technologies and their impact on the production of paediatric pharmaceutical forms. We analyse their potential, associated challenges, and recent developments, providing a comprehensive overview of the opportunities that these innovative methodologies offer to the pharmaceutical sector. We examine different pharmaceutical forms generated using these techniques, evaluating their advantages and disadvantages.

Solid Lipid Nanoparticles Encapsulating a Benzoxanthene Derivative in a Model of the Human Blood-Brain Barrier: Modulation of Angiogenic Parameters and Inflammation in Vascular Endothelial Growth Factor-Stimulated Angiogenesis

Lignans, a class of secondary metabolites found in plants, along with their derivatives, exhibit diverse pharmacological activities, including antioxidant, antimicrobial, anti-inflammatory, and antiangiogenic ones. Angiogenesis, the formation of new blood vessels from pre-existing ones, is a crucial process for cancer growth and development. Several studies have elucidated the synergistic relationship between angiogenesis and inflammation in various inflammatory diseases, highlighting a correlation between inflammation and vascular endothelial growth factor (VEGF)-induced angiogenesis. Thus, the identification of novel molecules capable of modulating VEGF effects presents promising prospects for developing therapies aimed at stabilizing, reversing, or even arresting disease progression. Lignans often suffer from low aqueous solubility and, for their use, encapsulation in a delivery system is needed. In this research, a bioinspired benzoxantene has been encapsulated in solid lipid nanoparticles that have been characterized for their pharmacotechnical properties and their thermotropic behavior. The effects of these encapsulated nanoparticles on angiogenic parameters and inflammation in VEGF-induced angiogenesis were evaluated using human brain microvascular endothelial cells (HBMECs) as a human blood-brain barrier model.

Preparation and characterization of novel nanostructured lipid carriers (NLC) and solid lipid nanoparticles (SLN) containing coenzyme Q10 as potent antioxidants and antityrosinase agents

We developed novel and optimal Q10-NLC/SLN formulations as antioxidant and anti-tyrosinase agents. The formulations were analyzed for particle size, morphology, entrapment efficiency (EE %), and long-term stability. The in vitro drug release and in vivo skin penetration were evaluated using dialysis bag diffusion and Sprague Dawley (SD) rats, respectively. Cytotoxicity and protecting effects were assessed by AlamarBlue® assay, ROS level by DCFH-DA, and tyrosinase activity by l-DOPA assay, measuring the absorbance at 470 nm. The selected formulations had optimal surface characterizations, including Z-average size, PDI, and Zeta potential ranging from 125 to 207 nm, 0.09-0.22, and -7 to -24, respectively. They also exhibited physiochemical stability for up to 6 months and EE% above 80 %. The lipids ratio and co-Q10 amount as variable factors significantly affected particle size and zeta potential but were insignificant on PDI. The in vitro release diagram showed that Q10-NLC/SLN revealed a fast release during the first 8 h and prolonged release afterward. The in vivo skin permeation revealed a higher accumulative uptake of co-Q10 in the skin for Q10-NLC/SLN compared to Q10 emulsions. Both selected Q10-NLC and Q10-SLN could reduce intracellular ROS after exposure to H2O2. The Q10-NLC was found to be more potent for inhibiting the tyrosinase activity compared to O10-SLN. The results suggest that the new formulations are promising carriers for topical delivery of co-Q10 as an anti-aging and skin-whitening agent.

Enhancing Oral Bioavailability of Simvastatin Using Uncoated and Polymer-Coated Solid Lipid Nanoparticles

Simvastatin (SVA) is a well-prescribed drug for treating cardiovascular and hypercholesterolemia. Due to the extensive hepatic first-pass metabolism and poor solubility, its oral bioavailability is 5%. Solid lipid nanoparticles (SLNs) and hydrogel-coated SLNs were investigated to overcome the limited bioavailability of SVA. Four different lipids used alone or in combination with two stabilizers were employed to generate 13 SLNs. Two concentrations of chitosan (CS) and alginate (AL) were coating materials. SLNs were studied for particle size, zeta potential, in vitro release, rheology, and bioavailability. The viscosities of both the bare and coated SLNs exhibited shear-thinning behavior. The viscosity of F11 (Chitosan 1%) at 20 and 40 rpm were 424 and 168 cp, respectively. F11 had a particle size of 260.1 ± 3.72 nm with a higher release; the particle size of F11-CS at 1% was 524.3 ± 80.31 nm. In vivo studies illustrated that F11 had the highest plasma concentration when compared with the SVA suspension and coated chitosan (F11 (Chitosan 1%)). Greater bioavailability is measured as (AUC0→24), as compared to uncoated ones. The AUC for F11, F11-CS 1%, and the SVA suspension were 1880.4, 3562.18, and 272 ng·h/mL, respectively. Both bare and coated SLNs exhibited a significantly higher relative bioavailability when compared to that from the control SVA.

Enhanced efficacy of β-carotene loaded solid lipid nanoparticles optimized and developed via central composite design on breast cancer cell lines

β-carotene is obtained from both plants and animals and has been the subject of intense research because of its provitamin-A, antioxidant, and anticancer effects. Its limited absorption and oxidative degradation significantly reduce its antitumor efficacy when taken orally. In our study, we utilize a central composite design to develop "bio-safe and highly bio-compatible" solid lipid nanoparticles (SLNs) by using only the combination of palmitic acid and poloxamer-407, a block co-polymer as a surfactant. The current research aim to develop and characterize SLNs loaded with β-carotene to improve their bioavailability and therapeutic efficacy. In addition, the improved cytotoxicity of solid lipid nanoparticles loaded with β-carotene was screened in-vitro in human breast cancer cell lines (MCF-7). The nanoparticles exhibits good stability, as indicated by their mean zeta potential of -26.3 ± 1.3 mV. The particles demonstrated high drug loading and entrapment capabilities. The fabricated nanoparticle's prolonged release potential was shown by the in-vitro release kinetics, which showed a first-order release pattern that adhered to the Higuchi model and showed a slow, linear, and steady release over 48 h. Moreover, a diffusion-type release mechanism was used to liberate β-carotene from the nanoparticles. For six months, the nanoparticles also showed a notable degree of physical stability. Lastly, using the MTT assay, the anti-cancer properties of β-carotene-loaded solid lipid nanoparticles were compared with intact β-carotene on MCF-7 cell lines. The cytotoxicity tests have shown that the encapsulation of β-carotene in the lipid bilayers of the optimized formulation does not interfere with the anti-cancer activity of the drug. When compared to standard β-carotene, β-carotene loaded SLNs showed enhanced anticancer efficacy and it is a plausible therapeutic candidate for enhancing the solubility of water-insoluble and degradation-sensitive biotherapeutics like β-carotene.

Natural-Origin Betaine Surfactants as Promising Components for the Stabilization of Lipid Carriers

In the present work, we demonstrate studies involving the influence of the formulation composition on the physicochemical properties of nanocarriers: solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs). Novel lipid-origin platforms were prepared using two "green" betaine-based surfactants, cocamidopropyl betaine (ROKAmina K30) and coco betaine (ROKAmina K30B), in combination with three different solid lipids, cetyl palmitate (CRODAMOL CP), trimyristin (Dynasan 114), and tristearin (Dynasan 118). Extensive optimization studies included the selection of the most appropriate lipid and surfactant concentration for effective SLN and NLC stabilization. The control parameters involving the hydrodynamic diameters of the obtained nanocarriers along with the size distribution (polydispersity index) were determined by dynamic light scattering (DLS), while shape and morphology were evaluated by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Electrophoretic light scattering (ELS) and turbidimetric method (backscattering profiles) were used to assess colloidal stability. The studied results revealed that both betaine-stabilized SLN and NLC formulations containing CRODAMOL CP as lipid matrix are the most monodisperse and colloidally stable regardless of the other components and their concentrations used, indicating them as the most promising candidates for drug delivery nanosystems with a diverse range of potential uses.

Quality by Design Assisted Development of Luliconazole Transethosomes in Gel for the Management of Candida albicans Infection

The objective of this study was to develop and evaluate a novel vesicular formulation of luliconazole (LUL) for the management of Candida albicans infection through a topical route. LUL-loaded transethosomes (LUL-TE) were prepared by the film hydration method and various independent and dependent variables were optimized using the Box-Behnken design. Selected critical material attributes were the content of phospholipids (X1), concentration of ethanol (X2), and amount of sodium cholate (X3). Formulated LUL-TE were characterized for percent entrapment efficiency, percent drug loading, vesicle size, and polydispersity index (PDI) and were incorporated into the carbomer gel base and further evaluated for gel characterizations. The prepared transethosomal gel (LUL-TE-CHG) was evaluated for pH, spreadability, viscosity, antifungal activity, and in vitro study. From the observed results, it was evident that the prepared LUL-TE-CHG was in the desired pH (6.2 ± 0.45), spreadability [8.3 ± 0.42 g/(cm·s)], viscosity (236.1-19.2.26 mPa·s), nanovesicle size (252 ± 9.82), entrapment efficiency (85% ± 5.24%), zeta potential (-34.05 ± 3.52 mV), and PDI (0.233 ± 0.002). The zone of inhibition results suggested that the LUL-TE-CHG formulation has the highest antifungal activity, that is, 5.83 ± 0.15 mm3. The in vitro results showed that drug release within 2 h was 18.1% ± 2.0% and after that sustained release action, 83.2% ± 1.7% within 8 h. Finally, to confirm the therapeutic efficacy of the developed formulation, fungal infection was induced by using C. albicans in Wistar rats. In vivo, skin irritation study and histopathology studies were performed in the disease-induced model. Animal experiments revealed that LUL-TE-CHG has significantly improved the diseased condition in Wistar rats. The results observed from the skin permeation and skin deposition profile ensure that the prepared novel LUL-loaded TE system had a higher permeation rate and increased retention time compared with LUL-CHG. The hydrogel incorporated with LUL could be a novel approach with safe and effective fungal treatment.

Oral Insulin Delivery: A Review on Recent Advancements and Novel Strategies

BACKGROUND

Due to the lifestyle of people in the community in recent years, the prevalence of diabetes mellitus has increased, so New drugs and related treatments are also being developed.

INTRODUCTION

One of the essential treatments for diabetes today is injectable insulin forms, which have their problems and limitations, such as invasive and less admission of patients and high cost of production. According to the mentioned issues, Theoretically, Oral insulin forms can solve many problems of injectable forms.

METHODS

Many efforts have been made to design and introduce Oral delivery systems of insulin, such as lipid-based, synthetic polymer-based, and polysaccharide-based nano/microparticle formulations. The present study reviewed these novel formulations and strategies in the past five years and checked their properties and results.

RESULTS

According to peer-reviewed research, insulin-transporting particles may preserve insulin in the acidic and enzymatic medium and decrease peptide degradation; in fact, they could deliver appropriate insulin levels to the intestinal environment and then to blood. Some of the studied systems increase the permeability of insulin to the absorption membrane in cellular models. In most investigations, in vivo results revealed a lower ability of formulations to reduce BGL than subcutaneous form, despite promising results in in vitro and stability testing.

CONCLUSION

Although taking insulin orally currently seems unfeasible, future systems may be able to overcome mentioned obstacles, making oral insulin delivery feasible and producing acceptable bioavailability and treatment effects in comparison to injection forms.

Microfluidic encapsulation of enzymes and steroids within solid lipid nanoparticles

The production of solid lipid nanoparticles (SLNs) is challenging, especially when considering the incorporation of biologics. A novel in-house method of microfluidic production of biologic-encapsulated SLNs is proposed, using a variety of base materials for formulation to help overcome the barriers presented during manufacture and administration. Trypsin is used as a model drug for hydrophilic encapsulation whilst testosterone is employed as a positive non-biologic lipophilic control active pharmaceutical ingredient. Particle sizes obtained ranged from 160 to 320 nm, and a lead formulation has been identified from the combinations assayed, allowing for high encapsulation efficiencies (47-90%, respectively) of both the large hydrophilic and the small hydrophobic active pharmaceutical ingredients (APIs). Drug release profiles were analysed in vitro to provide useful insight into sustained kinetics, providing data towards future in vivo studies, which displayed a slow prolonged release for testosterone and a quicker burst release for trypsin. The study represents a large leap forward in the field of SLN production, especially in the field of difficult-to-encapsulate molecules, and the technique also benefits from being more environmentally sustainable due to the use of microfluidics.

Preparation and Evaluation of Curcumin Derivatives Nanoemulsion Based on Turmeric Extract and Its Antidepressant Effect

Purpose

The early stage of this study verified that a turmeric extract (TUR) including 59% curcumin (CU), 22% demethoxycurcumin (DMC), and 18% bisdemethoxycurcumin (BDMC), could enhance the stability of CU and had greater antidepressant potential in vitro. The objective of the study was to develop a nano-delivery system containing TUR (TUR-NE) to improve the pharmacokinetic behavior of TUR and enhance its antidepressant effect.

Methods

The antidepressant potential of TUR was explored using ABTS, oxidative stress-induced cell injury, and a high-throughput screening model. TUR-NE was fabricated, optimized and characterized. The pharmacokinetic behaviors of TUR-NE were evaluated following oral administration to normal rats. The antidepressant effect of TUR-NE was assessed within chronic unpredictable mild stress model (CUMS) mice. The behavioral and biochemical indexes of mice were conducted.

Results

The results depicted that TUR had 3.18 and 1.62 times higher antioxidant capacity than ascorbic acid and CU, respectively. The inhibition effect of TUR on ASP+ transport was significantly enhanced compared with fluoxetine and CU. TUR-NE displayed a particle size of 116.0 ± 0.31 nm, polydispersity index value of 0.121 ± 0.007, an encapsulation rate of 98.45%, and good release and stability in cold storage. The results of pharmacokinetics indicated the AUC(0-t) of TUR-NE was 8.436 and 4.495 times higher than that of CU and TUR, while the Cmax was 9.012 and 5.452 times higher than that of CU and TUR, respectively. The pharmacodynamic study confirmed that the superior antidepressant effect of TUR-NE by significantly improving the depressant-like behaviors and elevating the content of 5-hydroxytryptamine in plasma and brain in CUMS mice. TUR-NE showed good safety with repeated administration.

Conclusion

TUR-NE, which had small and uniform particle size, enhanced the bioavailability and antidepressant effect of TUR. It could be a promising novel oral preparation against depression.

Optimization of cationic nanoparticles stabilized by poloxamer 188: A potential approach for improving the biological activity of Aloeperryi

Aloe perryi (AP) has gained considerable interest as a medicinal herb in various biological applications due to its rich phytochemical composition. However, the therapeutic benefits of AP could be potentiated by utilizing nanotechnology. Moreover, cationic solid lipid nanoparticles (CSLNs) possess remarkable characteristics that can greatly enrich a variety of biological uses. An optimization approach was used to achieve high-quality CSLNs to maximize the therapeutic efficacy of AP. Therefore, a factorial design was used to investigate the influence of various variables on the attributes of CSLNs quality. In this study, the factors under investigation were compritol 888 ATO (C-888, X1), poloxamer 188 (PL188, X2), and chitosan (CS, X3), which served as independent variables. The parameters measured as dependent variables included particle size (Y1), zeta potential (Y2), and encapsulation efficiency EE (Y3). The relationship among these variables was determined by Analysis of Variance (ANOVA) and response surface plots. The results revealed that PL188 played a significant role in reducing the particle size of CSLNS (ranging from 207 to 261 nm with 1 % PL188 to 167-229 nm with 3 % PL188). Conversely, an increase in the concentration of CS led to a rise in the particle size. The magnitude of positive zeta potential values was dependent on the increased concentration of CS. Moreover, the higher amounts of C-888 and PL188 improved the EE% of the CSLNs from 42 % to 86 %. Furthermore, a concentration-dependent antioxidant effect of the optimized AP-CSLNs was observed. The antioxidant activity of the optimized AP-CSLNs at 100 μg/mL was 75 % compared to 62 % and 60 % for AP-SLNs and AP solution, respectively. A similar pattern of improvement was also observed with antimicrobial, and anticancer activities of the optimized AP-CSLNs. These findings demonstrated the potential of AP-CSLNs as a carrier system, enhancing the biological activities of AP, opening new possibilities in herbal medicines.

Chitosan/Solid-Lipid Nanoparticles Hybrid Gels for Vaginal Delivery of Estradiol for Management of Vaginal Menopausal Symptoms

Hormonal replacement therapy is the mainstay treatment to improve quality of life and reduce mortality. With the increasing number of young women with early menopause, women now live longer (increased life expectancy). However, poor patient compliance with oral estrogen therapy has emerged. Intravaginal estrogen therapy can provide significant benefits with minimal risk for postmenopausal women with symptoms of the lower urinary tract and vaginal area but who do not want to take oral estrogen. In this study, estradiol-loaded solid lipid nanoparticles (SLPs) were prepared from compritol ATO 888 and precirol ATO 5, and two different stabilizers (Pluronic F127 and Tween 80) were studied. Selected SLPs (F3 and F6) were coated with different concentrations of the mucoadhesive and sustained-release polymer chitosan. Furthermore, gelation time, viscosity, mucoadhesion, ex vivo permeation, and in vitro irritation for vaginal irritation were studied. Particle sizes ranged between 450-850 nm, and EE% recorded 50-83% for the six SLPs depending on the type and amount of lipids used. Cumulative % drug release was significantly enhanced and was recorded at 51% to 83%, compared to that (less than 20%) for the control suspension of estradiol. Furthermore, extensive thermal gelation and mucoadhesion were recorded for chitosan-coated SLPs. Up to 2.2-fold increases in the permeation parameters for SLPs gels compared to the control suspension gel were recorded, revealing a slight to moderate irritation on Hela cell lines. These findings demonstrated chitosan-coated estradiol SLPs as novel and promising vaginal mucoadhesive hybrid nanogels.

Biophysical characterization of siRNA-loaded lipid nanoparticles with different PEG content in an aqueous system

Although lipid nanoparticles (LNP) are potential carriers of various pharmaceutical ingredients, further investigation for maintaining their stability under various environmental stressors must be performed. This study evaluated the influence of PEGylation and stress conditions on the stability of siRNA-loaded LNPs with different concentrations of PEG (0.5 mol%; 0.5 % PEG-LNP and 1.0 mol%; 1.0 % PEG-LNP) anchored to their surface. We applied end-over-end agitation, elevated temperature, and repeated freeze and thaw (F/T) cycles as physicochemical stressors of pH and ionic strength. Dynamic light scattering (DLS), flow imaging microscopy (FIM), and ionic-exchange chromatography (IEX) were to determine the degree of aggregation and change in siRNA content. The results indicate that 0.5 % PEG-LNP resisted aggregation only at low pH levels or with salt, whereas 1.0 % PEG-LNP had increased colloidal stability except at pH 4. 0.5 % PEG-LNP withstood aggregation until 71 °C and three cycles of F/T. In contrast, 1.0 % PEG-LNP maintained colloidal stability at 90 °C and seven F/T cycles. Moreover, 1.0 % PEG-LNP had higher siRNA stability under all stress conditions. Therefore, to ensure the stability of LNP and encapsulated siRNA, the PEG concentration must be carefully controlled while considering LNPs' colloidal instability mechanisms under various stress conditions.

Enhanced Cellular Uptake and Transport of Bovine Lactoferrin Using Pectin- and Chitosan-Modified Solid Lipid Nanoparticles

AIM

The aim of this project is to use pectin- and chitosan-modified solid lipid nanoparticles for bovine lactoferrin to enhance its cellular uptake and transport.

METHODS

Solid lipid particles containing bovine lactoferrin (bLf) were formulated through the solvent evaporation technique, incorporating stearic acid along with either chitosan or pectin modification. bLf cellular uptake and transport were evaluated in vitro using the human adenocarcinoma cell line Caco-2 cell model.

RESULTS AND DISCUSSION

The bLf-loaded SLPs showed no significant effect on cytotoxicity and did not induce apoptosis within the eight-hour investigation. The use of confocal laser scanning microscopy confirmed that bLf follows the receptor-mediated endocytosis, whereas the primary mechanism for the cellular uptake of SLPs was endocytosis. The bLf-loaded SLPs had significantly more cellular uptake compared to bLf alone, and it was observed that this impact varied based on the time, temperature, and concentration. Verapamil and EDTA were determined to raise the apparent permeability coefficients (App) of bLf and bLf-loaded SLPs.

CONCLUSION

This occurred because they hindered efflux by interacting with P-glycoproteins and had a penetration-enhancing influence. These findings propose the possibility of an additional absorption mechanism for SLPs, potentially involving active transportation facilitated by the P-glycoprotein transporter in Caco-2 cells. These results suggest that SLPs have the potential to be applied as effective carriers to improve the oral bioavailability of proteins and peptides.

Proniosomal Gel-Loaded Phosphodiesterase Inhibitors (Sildenafil, Vardenafil, and Tadalafil): Prospects for Topical Penile Therapy of Tadalafil for Treatment of Erectile Dysfunction

Oral phosphodiesterase inhibitors have emerged as a game changer for the treatment of erectile dysfunction (ED) since attaining FDA approval for its first member, sildenafil, in 1998. Topical penile therapy could be a viable replacement for oral medication that would transform the treatment of ED for many decades to come. This innovative idea could offer a safer topical alternative with less vision and cardiovascular side effects than the oral route. This work aims at developing proniosomal gels for three selected members (sildenafil, vardenafil, and tadalafil) and investigating the proniosomal gels on a rodent model. Niosomes derived from the parent proniosomal gels were characterized for entrapment efficiency (EE%), size, polydispersity index (PDI), zeta potential, and morphology. Proniosomal gels were evaluated for skin permeation, in vivo mating behaviors, and biochemical assays of nitric oxide (NO) and cyclic guanosine monophosphate (cGMP) post penile topical administrations. The optimized proniosomes loaded with tadalafil (F1-T) were compared with oral tablets (Cialis®). Proniosomal gels demonstrated significant enhancement of skin penetration by up to 5.5-fold, compared to control topical suspension. Tadalafil-loaded proniosomes showed superior skin permeability over sildenafil- and vardenafil-loaded proniosomes. In addition, significant improvement was noticed regarding intromission number, intromission ratio, NO, and cGMP for the proniosomal gel F1-T, compared to the untreated control. No statistically significant (p > 0.05) differences in sexual performance or biochemical parameters (NO and cGMP levels) were recorded among orally and topically (tadalafil proniosomal gel) administered groups. These findings support tadalafil topical penile therapy as a promising alternative to the oral route.

Development of Computational In Silico Model for Nano Lipid Carrier Formulation of Curcumin

The oral delivery system is very important and plays a significant role in increasing the solubility of drugs, which eventually will increase their absorption by the digestive system and enhance the drug bioactivity. This study was conducted to synthesize a novel curcumin nano lipid carrier (NLC) and use it as a drug carrier with the help of computational molecular docking to investigate its solubility in different solid and liquid lipids to choose the optimum lipids candidate for the NLCs formulation and avoid the ordinary methods that consume more time, materials, cost, and efforts during laboratory experiments. The antiviral activity of the formed curcumin-NLC against SARS-CoV-2 (COVID-19) was assessed through a molecular docking study of curcumin's affinity towards the host cell receptors. The novel curcumin drug carrier was synthesized as NLC using a hot and high-pressure homogenization method. Twenty different compositions of the drug carrier (curcumin nano lipid) were synthesized and characterized using different physicochemical techniques such as UV-Vis, FTIR, DSC, XRD, particle size, the zeta potential, and AFM. The in vitro and ex vivo studies were also conducted to test the solubility and the permeability of the 20 curcumin-NLC formulations. The NLC as a drug carrier shows an enormous enhancement in the solubility and permeability of the drug.

Spray-dried Solid Lipid Nanoparticles for Enhancing Berberine Bioavailability via Oral Administration

BACKGROUND

Berberine (BBR), an Eastern traditional medicine, has expressed novel therapeutic activities, especially for chronic diseases like diabetes, hyperlipemia, hypertension, and Alzheimer's disease. However, the low oral bioavailability of BBR has limited the applications of these treatments. Hence, BBRloaded solid lipid nanoparticles (BBR-SLNs) were prepared to improve BBR absorption into systemic circulations via this route.

METHODS

BBR-loaded solid lipid nanoparticles (BBR-SLNs) were prepared by ultrasonication and then transformed into solid form via spray drying technique. The size morphology of BBR-SLNs was evaluated by dynamic light scattering (DLS) and scanning electron microscope (SEM). Crystallinity of BBR and interaction of BBR with other excipients were checked by spectroscopic methods. Entrapment efficiency of BBR-SLNs as well as BBR release in gastrointestinal conditions were also taken into account. Lastly, SLN's cytotoxicity for loading BBR was determined with human embryonic kidney cells (HEK293).

RESULTS

Stearic acid (SA), glyceryl monostearate (GMS), and poloxamer 407 (P407) were selected for BBRSLNs fabrication. BBR-SLNs had homogenous particle sizes of less than 200 nm, high encapsulation efficiency of nearly 90% and loading capacity of above 12%. BBR-SLN powder could be redispersed without significant changes in physicochemical properties and was stable for 30 days. Spray-dried BBR-SLNs showed a better sustained in vitro release profile than BBR-SLNs suspension and BBR during the initial period, followed by complete dissolution of BBR over 24 hours. Notably, cell viability on HEK293 even increased up to 150% compared to the control sample at 100 μg/mL BBR-unloaded SLNs.

CONCLUSION

Hence, SLNs may reveal a promising drug delivery system to broaden BBR treatment for oral administration.

Development and optimization of a tamsulosin nanostructured lipid carrier loaded with saw palmetto oil and pumpkin seed oil for treatment of benign prostatic hyperplasia

Benign prostatic hyperplasia (BPH) is a nonmalignant growth of the prostate tissue and causes urinary tract symptoms. To provide effective treatment, tamsulosin (TM), saw palmetto oil (SP), and pumpkin seed oil (PSO) were combined and fabricated a nanostructured lipid carrier (NLC) as TM-S/P-NLC using experimental design. The purpose was to enhance the permeation and therapeutic activity of TM; combining TM with SP and PSO in an NLC generates a synergistic activity. An optimized TM-S/P-NLC was obtained after statistical analysis, and it had a particle size, percentage of entrapment efficiency, and steady-state flux of 102 nm, 65%, and 4.5 μg/cm².min, respectively. Additionally, the optimized TM-S/P-NLC had spherical particles with a more or less uniform size and a stability score of 95%, indicating a high level of stability. The in vitro release studies exhibited the optimized TM-S/P-NLC had the maximum release profile for TM (81 ± 4%) as compared to the TM-NLCs prepared without the addition of S/P oil (59 ± 3%) or the TM aqueous suspension (30 ± 5%). The plasma TM concentration–time profile for the TM-S/P-NLC and the marketed TM tablets indicated that when TM was supplied in a TM-S/P-NLC, the pharmacokinetic profile of the drug was improved. Simultaneously, in vivo therapeutic efficacy studies also showed favorable results for the TM-S/P-NLC in terms of the prostate weight and prostate index following treatment of BPH. Based on the findings of present study, we suggest that in the future, the TM-S/P-NLC could be a novel drug delivery system for treating BPH.

Formulation of the novel structure curcumin derivative-loaded solid lipid nanoparticles: synthesis, optimization, characterization and anti-tumor activity screening in vitro

This study investigated the effect of structural modification of Curcumin (CU) combined with the solid lipid nanoparticles (SLN) drug delivery system on anti-tumor activity in vitro. A new structure of Curcumin derivative (CU1) was successfully synthesized by modifying the phenolic hydroxyl group of CU. CU1 was two times more stable than CU at 45 °C or constant light. The SLN containing CU1 (CU1-SLN) was prepared, and the particle size, polydispersity index, entrapment efficiency, drug loading, and zeta potential of CU1-SLN were (104.1 ± 2.43) nm, 0.22 ± 0.008, (95.1 ± 0.38) %, (4.28 ± 0.02) %, and (28.3 ± 1.60) mV, respectively. X-ray diffraction (XRD) and Differential scanning calorimetry (DSC) showed that CU1 is amorphous in SLN. CU1-SLN released the drug slowly for 48 h, while CU and CU1 were released rapidly within 8 h. In terms of cytotoxicity, CU1 exhibited a 1.5-fold higher inhibition than CU against A549 and SMMC-7721 cells, while CU1-SLN showed 2-fold higher inhibition than CU1. Both CU1 and CU1-SLN reduced the toxicity in normal hepatocytes compared with CU (2.6-fold and 12.9-fold, respectively). CU1-SLN showed a significant apoptotic effect (p < 0.05). In summary, CU1 retained the inhibitory effect of CU against tumor cells, while improving stability and safety. Additionally, CU1-SLN presents a promising strategy for the treatment of liver and lung cancer.

Augmented Oral Bioavailability and Prokinetic Activity of Levosulpiride Delivered in Nanostructured Lipid Carriers

The present study is aimed to develop and optimize levosulpiride-loaded nanostructured lipid carriers (LSP-NLCs) for improving oral bioavailability and prokinetic activity of LSP. LSP-NLCs were optimized with D-optimal mixture design using solid lipid, liquid lipid and surfactant concentrations as independent variables. The prepared LSP-NLCs were evaluated for physicochemical properties and solid-state characterization. The in vivo oral pharmacokinetics and prokinetic activity of LSP-NLCs were evaluated in rats. LSP-NLCs formulation was optimized at Precirol® ATO 5/Labrasol (80.55/19.45%, w/w) and Tween 80/Span 80 concentration of 5% (w/w) as a surfactant mixture. LSP-NLCs showed a spherical shape with a particle size of 152 nm, a polydispersity index of 0.230 and an entrapment efficiency of 88%. The DSC and PXRD analysis revealed conversion of crystalline LSP to amorphous state after loading into the lipid matrix. LSP-NLCs displayed a 3.42- and 4.38-flods increase in AUC and Cmax after oral administration compared to LSP dispersion. In addition, LSP-NLCs showed enhanced gastric emptying (61.4%), intestinal transit (63.0%), and fecal count (68.8) compared to LSP dispersion (39.7%, 38.0% and 51.0, respectively). Taken together, these results show improved oral bioavailability and prokinetic activity of LSP-NLCs and presents a promising strategy to improve therapeutic activity of LSP for efficient treatment of gastric diseases.

Influence of Vegetable Oils on In Vitro Performance of Lutein-Loaded Lipid Carriers for Skin Delivery: Nanostructured Lipid Carriers vs. Nanoemulsions

Nanostructured lipid carriers (NLC) were prepared from solid lipid (glyceryl monostearate, GMS) and vegetable oils, including palm oil (PO), rice bran oil (RBO) or virgin coconut oil (VCO), at different ratios (95:5, 90:10 and 80:20), while nanoemulsions (NE) were prepared with sole vegetable oils. After production, the particle size of the lutein-free NLC and NE was found to be between 100 and 150 nm and increased after loading with lutein. An increase in oil loading in NLC reduced the particle size and resulted in a less ordered lipid matrix and an increase in % entrapment efficiency. From the stability study, it was observed that the types of oils and oil content in the lipid matrix had an impact on the chemical stability of lutein. Regarding the release study, lutein-loaded NE showed higher release than lutein-loaded NLC. Both NLC and NE prepared from VCO exhibited higher release than those prepared from PO and RBO, respectively (p < 0.05). In contrast, among the formulations of NLC and NE, both lutein-loaded NLC and NE prepared from RBO showed the highest permeation through the human epidermis due to the skin enhancement effect of RBO. Based on all the results, the lipid nanocarriers composed of RBO could effectively enhance the chemical stability of lutein and promote drug penetration into the skin.

Role of solid lipid nanoparticle for the delivery of Lipophilic Drugs and Herbal Medicines in the treatment of pulmonary hypertension

Pulmonary arterial hypertension (PAH) is an uncommon condition marked by elevated pulmonary artery pressure that leads to right ventricular failure. The majority of drugs are now been approved by FDA for PAH, however, several biopharmaceutical hindrances lead to failure of the therapy. Various novel drug delivery systems are available in the literature from which lipid-based nanoparticles i.e. solid lipid nanoparticle is widely investigated for improving the solubility and bioavailability of drugs. In this paper, the prototype phytoconstituents used in pulmonary arterial hypertension have limited solubility and bioavailability. We highlighted the novel concepts of SLN for lipophilic phytoconstituents with their potential applications. This paper also reviews the present state of the art regarding production techniques for SLN like High-Pressure Homogenization, Micro-emulsion Technique, and Phase Inversion Temperature Method, etc. Furthermore, toxicity aspects and in vivo fate of SLN are also highlighted in this review. In a nutshell, safer delivery of phytoconstituents by SLN added a novel feather to the cap of successful drug delivery technologies.

Design, characterization and in vivo performance of solid lipid nanoparticles (SLNs)-loaded mucoadhesive buccal tablets for efficient delivery of Lornoxicam in experimental inflammation

Lornoxicam (LRX) is a potent nonsteroidal anti-inflammatory drug (NSAID) used extensively to manage pain and inflammatory conditions. However, the drug possesses poor aqueous solubility (i.e., BCS class II) and a short half-life (3-4 h). Mucoadhesive buccal tablets containing LRX -loaded solid lipid nanoparticles (SLNs) were developed to enhance the drug solubility and bioavailability and achieve a controlled release pattern for a better anti-inflammatory effect. Different LRX-loaded SLNs were prepared using the hot homogenization /ultra-sonication technique and evaluated using size analysis and entrapment efficiency (EE%). Optimized LRX -loaded SLNs formulation showed particle size of 216 ± 7.4 nm, zeta potential of -27.3 ± 4.6 mV, and entrapment efficiency of 92.56 ± 2.3 %. Dried LRX-loaded SLNs alongside mucoadhesive polymers blend (PVP K30 /HPMC K15) were compressed to prepare the mucoadhesive buccal tablets. The tablets showed proper physicochemical properties, good mucoadhesive strength, long mucoadhesive time, suitable pH surface, good swelling capacity, and controlled drug release profile. Furthermore, Fourier transform-infrared (FTIR) spectroscopy, Powder X-Ray diffraction (PXRD), and Scanning electron microscopy (SEM) studies were carried out. The in vivo anti-inflammatory effect of pure LRX, market LRX and optimized mucoadhesive buccal tablet of LRX -loaded SLNs (T3) against carrageenan-induced models were evaluated. T3 showed a significant and early anti-inflammatory response after 1 and 2 h (63.62-77.84 % inhibition) as well as an extended effect after 4 h as compared to pure and market LRX. In parallel, T3 showed the best amelioration of PGE2, COX2, and TNF-α serum levels after 4 h of carrageenan injection.

Fundamental Aspects of Lipid-Based Excipients in Lipid-Based Product Development

Poor aqueous solubility of drugs is still a foremost challenge in pharmaceutical product development. The use of lipids in designing formulations provides an opportunity to enhance the aqueous solubility and consequently bioavailability of drugs. Pre-dissolution of drugs in lipids, surfactants, or mixtures of lipid excipients and surfactants eliminate the dissolution/dissolving step, which is likely to be the rate-limiting factor for oral absorption of poorly water-soluble drugs. In this review, we exhaustively summarize the lipids excipients in relation to their classification, absorption mechanisms, and lipid-based product development. Methodologies utilized for the preparation of solid and semi-solid lipid formulations, applications, phase behaviour, and regulatory perspective of lipid excipients are discussed.

Nanostructured lipid carriers: a promising drug carrier for targeting brain tumours

Background

In recent years, the field of nanotechnology and nanomedicine has transformed the pharmaceutical industry with the development of novel drug delivery systems that overcome the shortcomings of traditional drug delivery systems. Nanostructured lipid carriers (NLCs), also known as the second-generation lipid nanocarriers, are one such efficient and targeted drug delivery system that has gained immense attention all across due to their myriad advantages and applications. Scientific advancements have revolutionized our health system, but still, brain diseases like brain tumour have remained formidable owing to poor prognosis and the challenging drug delivery to the brain tissue. In this review, we highlighted the application and potential of NLCs in brain-specific delivery of chemotherapeutic agents.

Main body

NLCs are lipid-based formulations with a solid matrix at room temperature and offer advantages like enhanced stability, low toxicity, increased shelf life, improved drug loading capacity, and biocompatibility over other conventional lipid-based nanocarriers such as nanoemulsions and solid lipid nanoparticles. This review meticulously articulates the structure, classification, components, and various methods of preparation exemplified with various research studies along with their advantages and disadvantages. The concept of drug loading and release has been discussed followed by a brief about stability and strategies to improve stability of NLCs. The review also summarizes various in vitro and in vivo research studies on NLCs encapsulated with cytotoxic drugs and their potential application in brain-specific drug delivery.

Conclusion

NLCs are employed as an important carrier for the delivery of food, cosmetics, and medicines and recently have been used in brain targeting, cancer, and gene therapy. However, in this review, the applications and importance of NLCs in targeting brain tumour have been discussed in detail stating examples of various research studies conducted in recent years. In addition, to shed light on the promising role of NLCs, the current clinical status of NLCs has also been summarized.

Graphical Abstract

Glioblastoma multiforme targeted delivery of docetaxel using bevacizumab-modified nanostructured lipid carriers impair in vitro cell growth and in vivo tumor progression

Glioblastoma multiforme (GBM) is the most common malignant brain cancer, characterized by high invasiveness and poor prognosis. Docetaxel (DTX) is a chemotherapeutic drug with promising anti-tumor properties. However, conventional intravenous formulations exhibit side effects of systemic biodistribution and low brain bioavailability, limiting their clinical use. The current work aimed to evaluate the effect of DTX-loaded nanostructured lipid carriers (NLC) functionalized with bevacizumab (BVZ-NLC-DTX) against GBM using in vitro and in vivo models. The NLC was obtained by the fusion-emulsification method followed by sonication, with narrow size distribution, negative zeta potential, and low polydispersity index. NLC showed DTX entrapment efficiency above 90%. BVZ coupling efficiency was 62% and BVZ integrity after functionalization was confirmed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Calorimetry studies confirmed thermal stability and molecular dispersion of DTX in the lipid matrix. NLC showed a sustained DTX release over 84 h. In vitro anti-tumor assays shown that BVZ-NLC-DTX selectively increased the cytotoxic of DTX in cells overexpressing VEGF (U87MG and A172), but not in peripheral blood mononuclear cells (PMBCs), promoting cell death by apoptosis. BVZ functionalization did not impair cellular uptake. An in vivo orthotopic rat model demonstrated that free-DTX was not capable of reducing tumor growth whereas BVZ-NLC-DTX reduced up to 70% tumor volume after 15-days of treatment. Therefore, this study contributes to understanding new nanotechnology-based vehicles capable of reaching the brain more efficiently and repurposing the use of anti-cancer drugs in GBM treatment.

Targeted drug delivery vehicles mediated by nanocarriers and aptamers for posterior eye disease therapeutics: barriers, recent advances and potential opportunities

Nanomedicine and aptamer have excellent potential in giving play to passive and active targeting respectively, which are considered to be effective strategies in the retro-ocular drug delivery system. The presence of closely adjoined tissue structures in the eye makes it difficult to administer the drug in the posterior segment of the eye. The application of nanomedicine could represent a new avenue for the treatment, since it could improve penetration, achieve targeted release, and improve bioavailability. Additionally, a novel type of targeted molecule aptamer with identical objective was proposed. As an emerging molecule, aptamer shows the advantages of penetration, non-toxicity, and high biocompatibility, which make it suitable for ocular drug administration. The purpose of this paper is to summarize the recent studies on the effectiveness of nanoparticles as a drug delivery to the posterior segment of the eye. This paper also creatively looks forward to the possibility of the combined application of nanocarriers and aptamers as a new method of targeted drug delivery system in the field of post-ophthalmic therapy.

Solid Lipid Nanoparticles Administering Antioxidant Grape Seed-Derived Polyphenol Compounds: A Potential Application in Aquaculture

The supply of nutrients, such as antioxidant agents, to fish cells still represents a challenge in aquaculture. In this context, we investigated solid lipid nanoparticles (SLN) composed of a combination of Gelucire^® 50/13 and Precirol^® ATO5 to administer a grape seed extract (GSE) mixture containing several antioxidant compounds. The combination of the two lipids for the SLN formation resulted in colloids exhibiting mean particle sizes in the range 139–283 nm and zeta potential values in the range +25.6–43.4 mV. Raman spectra and X-ray diffraction evidenced structural differences between the free GSE and GSE-loaded SLN, leading to the conclusion that GSE alters the structure of the lipid nanocarriers. From a biological viewpoint, cell lines from gilthead seabream and European sea bass were exposed to different concentrations of GSE-SLN for 24 h. In general, at appropriate concentrations, GSE-SLN increased the viability of the fish cells. Furthermore, regarding the gene expression in those cells, the expression of antioxidant genes was upregulated, whereas the expression of hsp70 and other genes related to the cytoskeleton was downregulated. Hence, an SLN formulation containing Gelucire^® 50/13/Precirol^® ATO5 and GSE may represent a compelling platform for improving the viability and antioxidant properties of fish cells.

Famotidine-loaded solid self-nanoemulsifying drug delivery system demonstrates exceptional efficiency in amelioration of peptic ulcer

Famotidine (FMD) is a highly potent H₂-receptor antagonist used in peptic ulcer treatment. However, the drug possesses poor aqueous solubility and permeability. FMD-loaded solid self-nanoemulsifying drug delivery system (FMD-S-SNEDDS) comprised of Labrafil® M 1944 CS, Tween® 20 and PEG 400, adsorbed on Aerosil® 200, has been developed. FMD-S-SNEDDS has demonstrated acceptable micromeritic properties, and upon reconstitution in water, spherical nanosized particles were released, as demonstrated by dynamic light scattering studies and transmission electron microscopy imaging. High encapsulation efficiency of FMD in the developed SNEDDS has been attained, and the saturated solubility of the drug has increased by 20-fold when it was incorporated in the SNEDDS. Several in vitro characterizations have been carried out, including, Fourier transform-infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy, and drug dissolution studies. In vivo, upon administration of the free drug suspension, marketed product (FAMOTIN®) and FMD-S-SNEDDS (40 mg/kg) in peptic ulcer rat models, FMD-S-SNEDDS and the marketed FMD demonstrated 12.5- and 4.7-fold reduction in ulcers number, and 28.7- and 7.2-fold reduction in ulcer severity, respectively, compared to the control untreated animals. FMD-S-SNEDDS showed a significant (p < 0.05) increase in the levels of depleted glutathione and endothelial nitric oxide synthase, and significantly (p < 0.05) reduced the elevated level of malondialdehyde, as compared to the free and marketed FMD. Only FMD-S-SNEDDS could restore the elevated proton pump activity and cyclic adenosine monophosphate RNA expression to their normal levels. Hence, FMD-S-SNEDDS provides a great potential as a nanotherapeutic system for treatment of peptic ulcer.

Formula Development of Red Palm (Elaeis guineensis) Fruit Extract Loaded with Solid Lipid Nanoparticles Containing Creams and Its Anti-Aging Efficacy in Healthy Volunteers

Palm fruits (Elaeis guineensis) comprise antioxidants that can be used as skin care agents. This study developed a cosmeceutical cream containing E. guineensis extract, loaded with solid lipid nanoparticles (SLNs), and assessed its efficacy on female volunteers. The E. guineensis extract exhibited a good antioxidant activity with high levels of vitamin E, β-carotene, and palmitic acid. Day and night creams containing E. guineensis fruit extract, loaded with SLNs, were formulated and exhibited acceptable physical characteristics and good stability. Subsequently, their clinical efficacy and safety were evaluated on female volunteers. Both creams were non-irritating and had good cutaneous compatibility. Skin hydration, transepidermal water loss (TEWL), skin elasticity, melanin index, and skin texture were measured before and 30 min after the first application, as well as after 7, 14, and 30 days of daily application. A satisfactory survey was implemented using a questionnaire, and volunteer satisfaction scores were high for the product’s performance. Overall, the results showed that skin hydration, TEWL, cutaneous elasticity, and melanin index were improved, compared to the baseline data, after 30 days. Thus, the formulated facial day and night creams made the skin moist, reduced wrinkles, increased elasticity, and cleared the skin to the consumers’ satisfaction.

Nanostructured Lipid Carriers for the Formulation of Topical Anti-Inflammatory Nanomedicines Based on Natural Substances

The main function of the skin is to protect the body from the external environment. However, the skin can undergo inflammatory processes, due to genetic, hormonal, or environmental factors. When the defense system is overloaded, there is an increase in pro-inflammatory mediators and reactive oxygen species (ROS), which results in skin disorders. Among the substances used to treat these inflammatory processes, many natural substances with anti-inflammatory and antioxidant properties are being studied: nature is yet an abundant source to obtain diverse pharmacological actives. The treatment of skin diseases is usually focused on topical application, as it reduces the risk of systemic side effects and prevents drug degradation by first-pass metabolism. Thus, the properties of drug delivery vehicles can facilitate or inhibit its permeation. Due to the hydrophobic nature of the skin, a promising strategy to improve dermal drug penetration is the use of lipid-based nanoparticles, such as nanostructured lipid carriers (NLC). Therefore, in this review, we present NLC as a tool to improve dermal administration of natural substances with anti-inflammatory properties.

Preparation of Solid Dispersions of Simvastatin and Soluplus Using a Single-Step Organic Solvent-Free Supercritical Fluid Process for the Drug Solubility and Dissolution Rate Enhancement

The study was designed to investigate the feasibility of supercritical carbon dioxide (scCO₂) processing for the preparation of simvastatin (SIM) solid dispersions (SDs) in Soluplus^® (SOL) at temperatures below polymer’s glass transition. The SIM content in the SDs experimental design was kept at 10, 20 and 30% to study the effect of the drug–polymer ratio on the successful preparation of SDs. The SIM–SOL formulations, physical mixtures (PMs) and SDs were evaluated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), and dissolution studies. The scCO₂ processing conditions and drug–polymer ratio were found to influence the physicochemical properties of the drug in formulated SDs. SIM is a highly crystalline drug; however, physicochemical characterisation carried out by SEM, DSC, and XRD demonstrated the presence of SIM in amorphous nature within the SDs. The SIM–SOL SDs showed enhanced drug dissolution rates, with 100% being released within 45 min. Moreover, the drug dissolution from SDs was faster and higher in comparison to PMs. In conclusion, this study shows that SIM–SOL dispersions can be successfully prepared using a solvent-free supercritical fluid process to enhance dissolution rate of the drug.