Preparation and Characterization of Insoluble Silk Fibroin/Chitosan Blend Films

Fabrication and investigation of a pentamerous composite based on calix[4]arene functionalized graphene oxide grafted with silk fibroin, cobalt ferrite, and alginate

This paper presents a new scaffold made from graphene oxide nanosheets, calix[4]arene supramolecules, silk fibroin proteins, cobalt ferrite nanoparticles, and alginate hydrogel (GO-CX[4]/SF/CoFe2O4/Alg). After preparing the composite, we conducted various analyses to examine its structure. These analyses included FTIR, XRD, SEM, EDS, VSM, DLS, and zeta potential tests. Additionally, we performed tests to evaluate the swelling ratio, rheological properties, and compressive mechanical strength of the material. The biological capability of the composite was tested through biocompatiblity, anticancer, hemolysis, antibacterial anti-biofilm assays. Besides, the rheological properties and swelling behaviour of the composite were studied. The results showed that the scaffold is biocompatible with Hu02 cells and the cell viability percentages of 85.23 %, 82.78 %, and 80.18 % for were acquired for 24, 48, and 72 h, respectively. In contrast, the cell viability percentage of BT549 cancer cells were obtained 65.79 %, 60.45 % and 58.16 % for same period which confirmed notable anticancer activity of the product composite. Moreover, a significant antibacterial growth inhibition against E. coli and S. aureus species highlights its potential as an effective antibacterial agent. Furthermore, the observed minimal hemolytic effect (6.56 %) and strong inhibition of P. aeruginosa biofilm formation with a low OD value (0.24) indicate notable hemocompatibility and antibacterial activity.

Can a Scaffold Enriched with Mesenchymal Stem Cells Be a Good Treatment for Spinal Cord Injury?

Spinal cord injury (SCI) is a worldwide highly crippling disease that can lead to the loss of motor and sensory neurons. Among the most promising therapies, there are new techniques of tissue engineering based on stem cells that promote neuronal regeneration. Among the different types of stem cells, mesenchymal stem cells (MSCs) seem the most promising. Indeed, MSCs are able to release trophic factors and to differentiate into the cell types that can be found in the spinal cord. Currently, the most common procedure to insert cells in the lesion site is infusion. However, this causes a low rate of survival and engraftment in the lesion site. For these reasons, tissue engineering is focusing on bioresorbable scaffolds to help the cells to stay in situ. Scaffolds do not only have a passive role but become fundamental for the trophic support of cells and the promotion of neuroregeneration. More and more types of materials are being studied as scaffolds to decrease inflammation and increase the engraftment as well as the survival of the cells. Our review aims to highlight how the use of scaffolds made from biomaterials enriched with MSCs gives positive results in in vivo SCI models as well as the first evidence obtained in clinical trials.

Chitosan/Silk Fibroin Materials for Biomedical Applications-A Review

This review provides a report on recent advances in the field of chitosan (CTS) and silk fibroin (SF) biopolymer blends as new biomaterials. Chitosan and silk fibroin are widely used to obtain biomaterials. However, the materials based on the blends of these two biopolymers have not been summarized in a review paper yet. As these materials can attract both academic and industrial attention, we propose this review paper to showcase the latest achievements in this area. In this review, the latest literature regarding the preparation and properties of chitosan and silk fibroin and their blends has been reviewed.

Development of alginate-based hydrogels for blood vessel engineering

Vascular diseases are among the primary causes of death worldwide. In serious conditions, replacement of the damaged vessel is required. Autologous grafts are preferred, but their limited availability and difficulty of the harvesting procedures favour synthetic alternatives' use. However, as synthetic grafts may present significant drawbacks, tissue engineering-based solutions are proposed. Herein, tubular hydrogels of alginate combined with collagen type I and/or silk fibroin were prepared by ionotropic gelation using gelatin hydrogel sacrificial moulds loaded with calcium ions (Ca²⁺). The time of exposure of alginate solutions to Ca²⁺-loaded gelatin was used to control the wall thickness of the hydrogels (0.47 ± 0.10 mm-1.41 ± 0.21 mm). A second crosslinking step with barium chloride prevented their degradation for a 14 day period and improved mechanical properties by two-fold. Protein leaching tests showed that collagen type I, unlike silk fibroin, was strongly incorporated in the hydrogels. The presence of silk fibroin in the alginate matrix, containing or not collagen, did not significantly improve hydrogels' properties. Conversely, hydrogels enriched only with collagen were able to better support EA.hy926 and MRC-5 cells' growth and characteristic phenotype. These results suggest that a two-step crosslinking procedure combined with the use of collagen type I allow for producing freestanding vascular substitutes with tuneable properties in terms of size, shape and wall thickness.

A review on chitosan-based membranes for sustainable CO2 separation applications: Mechanism, issues, and the way forward

Effective carbon dioxide (CO₂) separation by nominal energy utilization is the factual attempt in the present era of energy scarcity and environmental calamity. In this perspective, the membrane- based gas separation technology is a budding endeavour owing to its cost -effectiveness, ease of operational maintenance and compact modular design. Among various membrane materials, bio-based polymers are of interest as they are abundant and can be obtained from renewable resources, and can also reduce our dependency on exhaustible fossil fuel-based sources. In this review, the structure-property relationship of chitosan and some of its film-forming derivatives has been critically studied for the first time in view of the fundamental properties required for gas separation applications. Various factors affecting the gas permeation performance of chitosan-based membranes have been highlighted along with prospects and propositions for the design of a few novel bio-based membranes based on the exhaustive analyses.

Robust and double-layer micro-patterned bioadhesive based on silk nanofibril/GelMA-alginate for stroma tissue engineering

We develop a robust micro-patterned double-layer film that can adhere firmly to the tissue and provide a sustained release of ascorbic acid (AA) for corneal regeneration. This double-layer film consists of a AA reservoir sodium alginate (SA) adhesive and an anisotropic layer made of micro-patterned silk nanofibrils (SNF) incorporated gelatin methacrylate (GelMA) (S/G). The S/G layer facilitates the adhesion and orientation of corneal stroma cells, depending on the pattern sizes (50 μm (P1) and 100 (P2) μm). Results reveal that more than 90% and 80% of the cells are located at angles close to the vertical axis (0-20°) in the sample with the smaller and larger pattern size, respectively. The mechanical robustness and 90% light transmission of this hybrid film originate from the micro-patterned S/G layer. However, the micro-pattern size does not show a significant role in the mechanical properties of hybrid films (tensile strength of S/G-SA, S/G-SA(P₁), and S/G-SA(P₂) is 3.4 ± 0.1 MPa, 3.6 ± 0.6 MPa and 3.3 ± 0.2 MPa, respectively). In addition, the strong adhesion to the tissue of this double-layer film is related to the alginate layer. AA can release in a controlled manner, which can significantly promote corneal stroma cells' attachment, alignment, and proliferation compared to the control (AA-free micro-patterned film). Our results reveal that this innovative multifunctional S/G-SA + AA film can be a proper candidate for use in stroma tissue engineering of the human cornea.

Horseradish Peroxidase-Crosslinked Calcium-Containing Silk Fibroin Hydrogels as Artificial Matrices for Bone Cancer Research

Hydrogels, being capable of mimicking the extracellular matrix composition of tissues, are greatly used as artificial matrices in tissue engineering applications. In this study, the generation of horseradish peroxidase (HRP)-crosslinked silk fibroin (SF) hydrogels, using calcium peroxide as oxidizer is reported. The proposed fast forming calcium-containing SF hydrogels spontaneously undergo SF conformational changes from random coil to β-sheet during time, exhibiting ionic, and pH stimuli responsiveness. In vitro response shows calcium-containing SF hydrogels' encapsulation properties and their ability to promote SaOs-2 tumor cells death after 10 days of culturing, upon complete β-sheet conformation transition. Calcium-containing SF hydrogels' angiogenic potential investigated in an in ovo chick chorioallantoic membrane (CAM) assay, show a high number of converging blood vessels as compared to the negative control, although no endothelial cells infiltration is observed. The in vivo response evaluated in subcutaneous implantation in CD1 and nude NCD1 mice shows that calcium-containing SF hydrogels are stable up to 6 weeks after implantation. However, an increased number of dead cells are also present in the surrounding tissue. The results suggest the potential of calcium-containing SF hydrogels to be used as novel in situ therapeutics for bone cancer treatment applications, particularly to osteosarcoma.

Fibroin nanoparticles: a promising drug delivery system

Fibroin is a dominant silk protein that possesses ideal properties as a biomaterial for drug delivery. Recently, the development of fibroin nanoparticles (FNPs) for various biomedical applications has been extensively studied. Due to their versatility and chemical modifiability, FNPs can encapsulate different types of therapeutic compounds, including small and big molecules, proteins, enzymes, vaccines, and genetic materials. Moreover, FNPs are able to be administered both parenterally and non-parenterally. This review summaries basic information on the silk and fibroin origin and characteristics, followed by the up-to-date data on the FNPs preparation and characterization methods. In addition, their medical applications as a drug delivery system are in-depth explored based on several administrative routes of parenteral, oral, transdermal, ocular, orthopedic, and respiratory. Finally, the challenges and suggested solutions, as well as the future outlooks of these systems are discussed.

Triboelectric nanogenerators based on graphene oxide coated nanocomposite fibers for biomedical applications

A high demand for green and eco-friendly triboelectric nanogenerators (TENGs) has multiplied the importance of their degradability for biomedical applications. However, the charge generation of current eco-friendly TENGs is generally limited. In this research, a flexible TENG based on a silk fibroin (SF) fibrous layer and a polycaprolactone (PCL)/graphene oxide (GO) fibrous layer was developed. Moreover, the PCL/GO layer was surface modified using various concentrations of GO (0, 1.5, 3, 6, and 9 wt%). We demonstrated that surface modification using GO nanosheets significantly improved the output of the TENG. Notably, the optimized GO modified layer resulted in a voltage of 100 V, a current of 3.15 mA [Formula: see text], and a power density of 72 mW[Formula: see text]. Moreover, a thin PCL layer applied as an encapsulation layer did not significantly modulate the performance of the TENG. Furthermore, during 28 d of soaking in a phosphate buffer solution, the proposed TENG was able to successfully generate electricity. The TENG was also proposed to be used for the electrical stimulation of PC12 cells. The results confirmed that this self-powered electrical stimulator could promote the attachment and proliferation of PC12 cells. Therefore, we have shown the potential for an eco-friendly and cost-effective TENG based on GO modified PCl/GO and silk fibrous layers to be used as a power source for biomedical applications.

Graphene oxide/alginate/silk fibroin composite as a novel bionanostructure with improved blood compatibility, less toxicity and enhanced mechanical properties

For biomedical applications, the design and synthesis of biocompatible nanostructures, are considered as critical challenges. In this study, graphene oxide (GO) was covalently modified by natural sodium alginate (Alg) polymer. By adding silk fibroin (SF) to this nanostructure, a hybrid nanobiocomposite (GO/Alg/SF) was resulted and its unique features were determined using FT-IR, EDX, FE-SEM, XRD and TG analyses. Because of using less toxic and high biocompatible materials, specific biological results were achieved. The cell viability of this novel nanostructure was 89.2 % and its hemolytic effect was less than 6% while the highest concentration (1000 μg/mL) of this nanostructure was chosen for these purposes. Also, high mechanical properties including the compressive strength (0.87 ± 0.034 (MPa)) and the compressive modulus (2.25 ± 0.091 (MPa)) were exposed. This nanostructure can be considered as a scaffold for wound dressing applications due to the mentioned properties.

Crosslinked Fibroin Nanoparticles: Investigations on Biostability, Cytotoxicity, and Cellular Internalization

Recently, crosslinked fibroin nanoparticles (FNP) using the crosslinker 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) or the polymer poly(ethylenimine) (PEI) have been developed and showed potentials as novel drug delivery systems. Thus, this study further investigated the biological properties of these crosslinked FNP by labeling them with fluorescein isothiocyanate (FITC) for in vitro studies. All formulations possessed a mean particle size of approximately 300 nm and a tunable zeta potential (-20 to + 30 mV) dependent on the amount/type of crosslinkers. The FITC-bound FNP showed no significant difference in physical properties compared to the blank FNP. They possessed a binding efficacy of 3.3% w/w, and no FITC was released in sink condition up to 8 h. All formulations were colloidal stable in the sheep whole blood. The degradation rate of these FNP in blood could be controlled depending on their crosslink degree. Moreover, no potential toxicity in erythrocytes, Caco-2, HepG2, and 9L cells was noted for all formulations at particle concentrations of < 1 mg/mL. Finally, all FNP were internalized into the Caco-2 cells after 3 h incubation. The uptake rate of the positively charged particles was significantly higher than the negatively charged ones. In summary, the crosslinked FNP were safe and showed high potentials as versatile systems for biomedical applications.

Protective effect of brain-derived neurotrophic factor and neurotrophin-3 overexpression by adipose-derived stem cells combined with silk fibroin/chitosan scaffold in spinal cord injury

Objectives: Spinal cord injury (SCI) is a most debilitating traumatic injury, and cytotherapy is a promising alternative treatment strategy. Here we investigated the effect and mechanism of adipose-derived stem/stromal cells (ASCs) with overexpressing brain-derived neurotrophic factor (BDNF) and neurotrophin-3 (NT3) (BDNF-NT3) in combination with silk fibroin/chitosan scaffold (SFCS) in SCI.Methods: Female Sprague-Dawley rats were used as an SCI model. SFCS,SFCS and ASCs, or ASCs overexpressing NT3, BDNF, and BDNF-NT3 were implanted into SCI rats. Basso, Beattie, and Bresnahan score, pathological changes, and spinal cord tissue and nerve fiber morphology were observed and assayed. GAP-43, GFAP, and caspase-3 expression was determined using immunohistochemistry and western blotting.Results: Smoother spinal cords, less scar tissue, and lower inflammatory activity were found in the SFCS, SFCS and ASCs, ASCs with NT3, BDNF, and BDNF-NT3 overexpression treatment than in the untreated SCI rat groups. Increasing formation of nerve fibers was observed in the above groups in order. GAP-43 expression significantly increased, while GFAP and caspase-3 expression significantly decreased. These results indicated obvious alleviation in pathological changes and BDNF-NT3 overexpression in ASCs combined with SFCS treatment in SCI rats.Conclusion: Thus, BDNF-NT3 overexpression from ASCs with SFCS had synergistic neuroprotective effects on SCI and may be a treatment option for SCI.

Curcumin-loaded naturally-based nanofibers as active wound dressing mats: morphology, drug release, cell proliferation, and cell adhesion studies

A perfect wound dressing should be able to maintain a high moisture content, manage exudates effectively, provide thermal insulation, and provide reliable mechanical strength.

Thermally triggered injectable chitosan/silk fibroin/bioactive glass nanoparticle hydrogels for in-situ bone formation in rat calvarial bone defects

Copper-containing bioactive glass nanoparticles (Cu-BG NPs) with designed compositions and sizes were synthesized and incorporated into chitosan (CH)/silk fibroin (SF)/glycerophosphate (GP) composites to prepare injectable hydrogels for cell-free bone repair. The resulting Cu-BG/CH/SF/GP gels were found to exhibit well-defined injectability and to undergo rapid gelation at physiological temperature and pH. They were highly porous and showed the ability to administer Si, Ca and Cu ions at their respective safe doses in a sustained and controlled manner. In vitro studies revealed that the gels supported the growth of seeded MC3T3-E1 and human umbilical vein endothelial cells, and effectively induced them toward osteogenesis and angiogenesis, respectively. In vivo bone repair based on a critical-size rat calvarial bone defect model demonstrated that the optimal Cu-BG/CH/SF/GP gel was able to fully restore the bone defect with formation of vascularized bone tissue and mineralized collagen deposition during a treatment period of 8 weeks without utilization of any cells and/or growth factors. The results suggest that the presently developed Cu-BG/CH/SF/GP composite hydrogels have great potential and translation ability for bone regeneration owing to their thermo-sensitive properties, cell-free bioactivity, and cost-effectiveness. STATEMENT OF SIGNIFICANCE: Hydrogels loaded with cells and/or growth factors exhibit potential in bone repair. However, they have been facing obstacles related to the clinic translation. Here, a novel type of hydrogel system consisting of copper-containing bioactive glass nanoparticles and chitosan/silk fibroin composite was developed. These gels showed injectability and thermally triggered in situ gelation properties and were able to administer the release of ions at safe but effective doses in a controlled manner while inducing the seeded cells toward osteogenesis and angiogenesis. The optimal gel showed the ability to fully repair critical-size rat calvarial bone defects without involving time consuming cell processing and/or the use of expensive growth factors, confirming that this novel hydrogel system has great potential for translation to the clinic.

Desarrollo y caracterización de películas de fibroina de seda para reparación condral

La fibroína  de seda es una proteína  que ha demostrado ser un biomaterial con gran potencial en medicina  regenerativa, por  suscaracterísticas de biocompatibilidad y su amplia posibilidad de modificación estructural permite ser usada como andamio favore-ciendo procesos de crecimiento, diferenciación celular y la regeneración del tejido afectado.En este estudio se utilizaron capullos de gusano de seda Bombyx moriL., para la fabricación de películas de fibroína, los capullos fueron desgomados utilizando Na2CO30,02M, la fibroína obtenida se disolvió con LiBr 9,3M, el cual fue eliminado mediante diáli-sis y finalmente la solución de fibroína fue concentrada mediante contradiálisis. La fibroína fue servida en cajas de poliestireno, se-cadas a 90°C/24 horas y esterilizadas con etanol al 70%. Células madre mesenquimales fueron sembradas sobre estas películas de fibroína e inducidas a diferenciación utilizando un medio condrogénico especifico. La diferenciación fue evaluada por triplicadoa los 14 y 21 días mediante extracción de ARN total, síntesis de ADN copia y amplificación por PCR de un grupo de genes específi-cos de cartílago empleando cebadores específicos.Se fabricaron películas de fibroína estables y resistentes que permitieron el crecimiento y la multiplicación celular, así como la dife-renciación condrogénica evidenciada por la expresión de genes condrogenicos, no se afectó la viabilidad ni el recuento celular, las células  interactuaron  con el  andamio  evidenciado  por  el  área  de  tapizado  formado  sobre  la  superficie  de  la  película  de  fibroína.Finalmente se concluye que la fibroína de seda es un biomaterial que puede servir de andamio potencial para la regeneración de lesiones articulares.

Experimental Methods for Characterizing the Secondary Structure and Thermal Properties of Silk Proteins

Silk proteins are biopolymers produced by spinning organisms that have been studied extensively for applications in materials engineering, regenerative medicine, and devices due to their high tensile strength and extensibility. This remarkable combination of mechanical properties arises from their unique semi-crystalline secondary structure and block copolymer features. The secondary structure of silks is highly sensitive to processing, and can be manipulated to achieve a wide array of material profiles. Studying the secondary structure of silks is therefore critical to understanding the relationship between structure and function, the strength and stability of silk-based materials, and the natural fiber synthesis process employed by spinning organisms. However, silks present unique challenges to structural characterization due to high-molecular-weight protein chains, repetitive sequences, and heterogeneity in intra- and interchain domain sizes. Here, experimental techniques used to study the secondary structure of silks, the information attainable from these techniques, and the limitations associated with them are reviewed. Ultimately, the appropriate utilization of a suite of techniques discussed here will enable detailed characterization of silk-based materials, from studying fundamental processing-structure-function relationships to developing commercially useful quality control assessments.

Graphene-Incorporated Biopolymeric Mixed-Matrix Membrane for Enhanced CO2 Separation by Regulating the Support Pore Filling

The CO₂ separation performance by a membrane is influenced essentially by film thickness, temperature, moisture, and pressure. Pore formation on the active layer and pore clogging of the membrane support are critical factors that impedes the CO₂ separation performance. This study involves the development of a novel nanocomposite membrane (CS/SF/GNP) consisting of chitosan (CS), silk fibroin (SF), and graphene nanoparticles (GNP). The CS acts as the matrix, SF contributes to the CO₂ facilitated transport by its inherent amines as carriers, and GNP helped in counteracting the support pore blockage during the gas separation test. The positive effect of GNP in the CS/SF/GNP was further apparent in the CO₂ permeance inconsequential drop of ∼7% during the initial 12 h in the presence of moisture and pressure. The detailed characterizations including FESEM, AFM, and swelling were performed for the membranes. The effect of sweep water flow rate, temperature, and feed absolute pressure on CO₂ separation performance from binary gas were performed. The CS/SF/GNP membrane exhibited CO₂ permeance of 159 GPU and CO₂/N₂ selectivity of 93 at 90 °C and a feed absolute pressure of 2 bar having a sweep side water flow rate of 0.05 mL/min. Further, when CS/SF/GNP membrane was tested to separate CO₂ from ternary gas mixture (CO₂/N₂/H₂), it displayed excellent CO₂ permeance of 126 GPU and selectivity for CO₂/N₂ and CO₂/H₂ as 104 and 52, respectively. The TGA isotherm and XPS analysis of CS/SF/GNP membrane suggested a thermal stability of the prepared membrane that establishes its suitability for the gas permeation at different temperature.

Rapidly responsive silk fibroin hydrogels as an artificial matrix for the programmed tumor cells death

Timely and spatially-regulated injectable hydrogels, able to suppress growing tumors in response to conformational transitions of proteins, are of great interest in cancer research and treatment. Herein, we report rapidly responsive silk fibroin (SF) hydrogels formed by a horseradish peroxidase (HRP) crosslinking reaction at physiological conditions, and demonstrate their use as an artificial biomimetic three-dimensional (3D) matrix. The proposed SF hydrogels presented a viscoelastic nature of injectable hydrogels and spontaneous conformational changes from random coil to β-sheet conformation under physiological conditions. A human neuronal glioblastoma (U251) cell line was used for screening cell encapsulation and in vitro evaluation within the SF hydrogels. The transparent random coil SF hydrogels promoted cell viability and proliferation up to 10 days of culturing, while the crystalline SF hydrogels converted into β-sheet structure induced the formation of TUNEL-positive apoptotic cells. Therefore, this work provides a powerful tool for the investigation of the microenvironment on the programed tumor cells death, by using rapidly responsive SF hydrogels as 3D in vitro tumor models.

Silk fibroin/chitosan thin film promotes osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells

As a biodegradable polymer thin film, silk fibroin/chitosan composite film overcomes the defects of pure silk fibroin and chitosan films, respectively, and shows remarkable biocompatibility, appropriate hydrophilicity and mechanical properties. Silk fibroin/chitosan thin film can be used not only as metal implant coating for bone injury repair, but also as tissue engineering scaffold for skin, cornea, adipose, and other soft tissue injury repair. However, the biocompatibility of silk fibroin/chitosan thin film for mesenchymal stem cells, a kind of important seed cell of tissue engineering and regenerative medicine, is rarely reported. In this study, silk fibroin/chitosan film was prepared by solvent casting method, and the rat bone marrow-derived mesenchymal stem cells were cultured on the silk fibroin/chitosan thin film. Osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells were induced, respectively. The proliferation ability, osteogenic and adipogenic differentiation abilities of rat bone marrow-derived mesenchymal stem cells were systematically compared between silk fibroin/chitosan thin film and polystyrene tissue culture plates. The results showed that silk fibroin/chitosan thin film not only provided a comparable environment for the growth and proliferation of rat bone marrow-derived mesenchymal stem cells but also promoted their osteogenic and adipogenic differentiation. This work provided information of rat bone marrow-derived mesenchymal stem cells behavior on silk fibroin/chitosan thin film and extended the application of silk fibroin/chitosan thin film. Based on the results, we suggested that the silk fibroin/chitosan thin film could be a promising material for tissue engineering of bone, cartilage, adipose, and skin.

Removal of toxic heavy metal lead (II) using chitosan oligosaccharide-graft-maleic anhydride/polyvinyl alcohol/silk fibroin composite

The present work was aimed to investigate the efficiency of novel chitosan oligosaccharide-graft-maleic anhydride(COS-g-MAH)/Polyvinyl alcohol (PVA)/silk fibroin (SF) composite for removing the toxic heavy metal lead (II) ion from aqueous solution by batch adsorption studies. Initially the chitosan oligosaccharide-graft-maleic anhydride copolymer has been prepared by utilizing ceric ammonium nitrate as an initiator and the optimised graft copolymer was then used for synthesizing COS-g-MAH/PVA/SF composite. The prepared samples were analyzed through FTIR and XRD studies. The FTIR results indicate that the grafted chitosan oligosaccharide copolymer was mixed homogeneously with silk fibroin and polyvinyl alcohol through intermolecular hydrogen bonding. The XRD results elucidate the changes in the crystalline behaviour of the prepared COS-g-MAH/PVA/silk fibroin composite. Both FTIR and XRD results revealed a strong interaction among COS-g-MAH, PVA and silk fibroin components. To evaluate the adsorption potential of the synthesized composite, the parameters such as pH, adsorbent dosage, contact time and initial Pb(II)ion concentration was investigated. The adsorption isotherms of Pb(II) could be described very well by Langmuir model and the kinetic results revealed that pseudo second order kinetics shows a better fit. This work provides a practical and high-efficient method for water treatment at moderate concentration of toxic heavy metals.

Fabrication of Biocompatible, Functional, and Transparent Hybrid Films Based on Silk Fibroin and Epoxy Silane for Biophotonics

In this work we explored the fabrication of flexible and transparent hybrids of silk fibroin (SF) and epoxy-modified siloxane for photonic applications. It is well-known that regenerated SF solutions can form free-standing films with high transparency. Although SF has a restricted number of chemically reactive side groups, the main issues of as-cast pristine SF films regard the high solubility into aqueous media, brittleness, and low thermal stability. The design of SF films with enhanced functionality but high transparency triggers new opportunities on a broader range of applications in biophotonics. Here we present a simple, functional, yet remarkably versatile hybrid material derived from silica sol-gel process based on SF protein and (3-glycidyloxypropyl)trimethoxysilane (GPTMS), an organically modified silicon-alkoxide owning a reactive terminal epoxy group. Specifically, we investigated the effect of the addition of GPTMS into SF solutions on the processability, morphology, crystallinity, and mechanical and optical properties of the resulting hybrid films. Highly transparent (ca. 90%) and flexible free-standing hybrid films were achieved. Cell viability assays revealed that the hybrid films are noncytotoxic to rat osteoblast cells even at high GPTMS content (up to 70 wt %). The hybrid films showed enhanced thermal stability and were rich in organic (epoxy) and inorganic (silanol) functional groups according to the content of GPTMS. We also evaluated the successful preparation of high-quality optical red emissive SF hybrid films by loading YVO₄:Eu³⁺ nanoparticles at low concentration (<5 wt %). A meaningful description of the hybrid film structure is reported from the combination of scanning electron and atomic force microscopies, vibrational spectroscopy, solid-state NMR, and X-ray diffraction analyses.

Physicochemical and biological characteristics of BMP-2/IGF-1-loaded three-dimensional coaxial electrospun fibrous membranes for bone defect repair

Coaxial electrospun fibrous membranes show favorable mechanical properties for use in guided bone regeneration (GBR). We used coaxial electrospinning technology to fabricate three-dimensional nanofiber membranes loaded with BMP-2 and IGF-1, and assessed the physicochemical and biological properties of these novel membranes in vitro. We fabricated four experimental groups of BMP-2/IGF-1/BSA-loaded membranes with different flow ratios (shell/core). Membrane characteristics were assessed by scanning and transmission electron microscopy, and laser confocal microscopy. Physicochemical and drug release properties were evaluated based on contact angle, mechanical property testing, X-ray diffraction analysis, and ELISA. The membranes were seeded with bone marrow-derived mesenchymal stem cells (BMMSCs) to estimate their biological properties based on cell viability and alkaline phosphatase (ALP) activity. The four membrane groups presented uniform diameters and core-shell structures. Acceleration of the shell solution flow rate increased the contact angle and mechanical properties of the fibrous membrane, while dual-factor addition did not impact fiber structure. Each drug-loaded membrane showed a gradually increasing release curve, with varying degrees of burst and sustained release. Compared to the other groups, the membranes with a core-shell flow ratio of 1:10 showed better drug-loading capacity and sustained release performance, higher biological properties and good barrier function. Optimal parameters were chosen based on the physical and chemical characteristics and biological properties of the membrane. Our results imply that the BMP-2/IGF-1/BSA-loaded coaxial electrospun fibrous membrane with optimum parameters is a suitable barrier membrane for GBR, and releases multiple factors promoting osteoconduction and osteoinduction.

Immobilization of Amano lipase from Pseudomonas fluorescens on silk fibroin spheres: an alternative protocol for the enantioselective synthesis of halohydrins

Amano lipase from Pseudomonas fluorescens immobilized on silk fibroin spheres and used in the enzymatic kinetic resolution of halohydrins, to obtain optically active epoxides, important precursors in the synthesis of antifungal azoles.

Biomineralization of Engineered Spider Silk Protein-Based Composite Materials for Bone Tissue Engineering

Materials based on biodegradable polyesters, such as poly(butylene terephthalate) (PBT) or poly(butylene terephthalate-co-poly(alkylene glycol) terephthalate) (PBTAT), have potential application as pro-regenerative scaffolds for bone tissue engineering. Herein, the preparation of films composed of PBT or PBTAT and an engineered spider silk protein, (eADF4(C16)), that displays multiple carboxylic acid moieties capable of binding calcium ions and facilitating their biomineralization with calcium carbonate or calcium phosphate is reported. Human mesenchymal stem cells cultured on films mineralized with calcium phosphate show enhanced levels of alkaline phosphatase activity suggesting that such composites have potential use for bone tissue engineering.

Hybrid scaffolding strategy for dermal tissue reconstruction: a bioactive glass/chitosan/silk fibroin composite

Regeneration of deep burn wounds is a very complex process that strongly relies on the tissue response between the dermal substitute and the newly-formed dermis.

Silk fibroin protein-based nonwoven mats incorporating baicalein Chinese herbal extract: preparation, characterizations, and in vivo evaluation

In this study, we demonstrated a natural silk fibroin protein (SFP) that was blended with a Chinese herbal extract (baicalein, BAI) to obtain an effective combination for producing electrospun nonwoven mats with anti-inflammatory and antibacterial functions. A series of SFP-based electrospun nonwoven mats with additives of varying compositions were produced and investigated. Performance comparisons showed that the SFP/polyvinylpyrrolidone (PVP)/BAI nonwoven mat is the optimal one. In vitro, SFP/PVP/BAI nonwoven mat is effective in inhibiting the formation of nitrite in lipopolysaccharide (LPS)-induced nitrite formation in Raw 264.7 macrophages model and the growth of Staphylococcus aureus (S. aureus). Especially in the case of SFP/PVP/BAI nonwoven mat, Bai has been proved to reach their maximum amount of releases of approximately 64.8% within 24 h of contact with water-based environment as compared to the SFP/BAI nonwoven mat (only 30.1% of release within 24 h). For in vivo experiments, a 1.2 cm × 1.2 cm wound area was created on the back of mice and seeded with 1 × 10⁷ CFU/mL of S. aureus to induce an infected wound model. The experimental results show significant acceleration of the wound closure process in mice treated with SFP/PVP/BAI nonwoven mat (4 days of reduction as compared to the untreated group), reduction in infiltration of neutrophils, nitrite formation, and inhibition of growth of wound bacteria. Histological images of the group treated with SFP/PVP/BAI nonwoven mat showed a compete repair of skin hierarchy, increasing production of collagen fibers, and enhancement of angiogenesis. This may bring a better recovery of skin appearance after treatment. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 420-430, 2017.