Characterization of protein release from hydrolytically degradable poly(ethylene glycol) hydrogels

Impact of Confinement within a Hydrogel Mesh on Protein Thermodynamic Stability and Aggregation Kinetics

Though protein stability and aggregation have been well characterized in dilute solutions, the influence of a confining environment that exists (e.g., in intercellular and tissue spaces and therapeutic formulations) on the protein structure is largely unknown. Herein, the effects of confinement on stability and aggregation were explored for proteins of different sizes, stability, and hydrophobicity when encapsulated in hydrophilic poly(ethylene glycol) hydrogels. Denaturation curves show linear correlations between confinement size (mesh size) and thermodynamic stability, i.e., unfolding free energy and surface area accessible for solvation (represented by m-value). Two clusters of protein types are identifiable from these correlations; the clusters are defined by differences in protein stability, surface area, and aggregation propensity. Proteins with higher stability, larger surface area, and lower aggregation propensity (e.g., lysozyme and myoglobin) are less affected by the confinement imposed by mesh size than proteins with lower stability, smaller surface area, and higher aggregation propensity (e.g., growth hormone and aldehyde dehydrogenase). According to aggregation kinetics measured by thioflavin T fluorescence, confinement in smaller mesh sizes resulted in slower aggregation rates than that in larger mesh sizes. Compared to that in buffer solution, the confinement of a hydrophobic protein (e.g., human insulin) in the hydrogels accelerates protein aggregation. Conversely, the confinement of a hydrophilic protein (e.g., human amylin) in the hydrogels decelerates or prevents aggregation, with the rates of aggregation inversely proportional to mesh size. These findings provide new insights into protein conformational stability in confined microenvironments relevant to various cellular, tissue, and therapeutics scenarios.

Subcutaneous angiogenesis induced by transdermal delivery of gel-in-oil nanogel dispersion

Subcutaneous transplantation aims to enhance the growth and functionality of transplanted cells for therapeutic outcomes in tissue engineering. However, the limited subcutaneous vascular network poses a challenge. Conventional methods involve co-transplantation with endothelial cells or angiogenic scaffold implantation, but they have drawbacks like tissue inflammation, compromised endothelial cell functionality, and the risk of repeated scaffold transplantation. Effective techniques are needed to overcome these challenges. This study explores the potential of G/O-NGD, a gel-in-oil nanogel dispersion, as a transdermal carrier of proliferative factors to promote angiogenesis in subcutaneous graft beds before cell transplantation. We observed robust subcutaneous angiogenesis by delivering varying amounts of bFGF using the G/O-NGD emulsion. Quantitative analysis of several parameters confirmed the efficacy of this method for building a subcutaneous vascular network. G/O-NGD is a biodegradable material that facilitates localized transdermal delivery of bFGF while maintaining its activity. The findings of this study have significant implications in both medical and industrial fields.

Moderate-Affinity Affibodies Modulate the Delivery and Bioactivity of Bone Morphogenetic Protein-2

Uncontrolled bone morphogenetic protein-2 (BMP-2) release can lead to off-target bone growth and other adverse events. To tackle this challenge, yeast surface display is used to identify unique BMP-2-specific protein binders known as affibodies that bind to BMP-2 with different affinities. Biolayer interferometry reveals an equilibrium dissociation constant of 10.7 nm for the interaction between BMP-2 and high-affinity affibody and 34.8 nm for the interaction between BMP-2 and the low-affinity affibody. The low-affinity affibody-BMP-2 interaction also exhibits an off-rate constant that is an order of magnitude higher. Computational modeling of affibody-BMP-2 binding predicts that the high- and low-affinity affibodies bind to two distinct sites on BMP-2 that function as different cell-receptor binding sites. BMP-2 binding to affibodies reduces expression of the osteogenic marker alkaline phosphatase (ALP) in C2C12 myoblasts. Affibody-conjugated polyethylene glycol-maleimide hydrogels increase uptake of BMP-2 compared to affibody-free hydrogels, and high-affinity hydrogels exhibit lower BMP-2 release into serum compared to low-affinity hydrogels and affibody-free hydrogels over four weeks. Loading BMP-2 into affibody-conjugated hydrogels prolongs ALP activity of C2C12 myoblasts compared to soluble BMP-2. This work demonstrates that affibodies with different affinities can modulate BMP-2 delivery and activity, creating a promising approach for controlling BMP-2 delivery in clinical applications.

Application of Hydrogels in the Device of Ophthalmic Iontophoresis: Theory, Developments and Perspectives

The human eye is a consolidated organ with delicate structures and unique immune privileges. Ocular diseases are intractable due to the intrinsic biological barriers within the eyeball. Hydrogels are excellent drug-carrying substances with soft material and excellent properties. They have been extensively used to deliver drugs into ocular tissue via iontophoresis devices. Ophthalmic iontophoresis is an electrochemical technique using tiny electrical currents to deliver drugs into the eye non-invasively. The early infantile iontophoresis technique often required long applying time to achieve therapeutic dose in the posterior ocular segment. The potential limitations in the initial drug concentration and the maximum safe currents would also impede the efficiency and safety of iontophoresis. Moreover, the poor patient compliance always leads to mechanical damage to the cornea and sclera during application. Advantageously, the flexible drug-carrying hydrogel can be in direct contact with the eye during iontophoresis, thereby reducing mechanical damage to the ocular surface. Moreover, the water absorption and adjustable permeability of hydrogels can reduce the electrochemical (EC) reactions and enhance the efficiency of iontophoresis. In this review, we focus on recent developments of hydrogels iontophoresis in ophthalmologic practice. Refinements of the knowledge would provide an outlook for future application of hydrogels in treating ocular disease.

Supramolecular Phenylalanine-Derived Hydrogels for the Sustained Release of Functional Proteins

Protein-based therapeutics have emerged as next-generation pharmaceutical agents for oncology, bone regeneration, autoimmune disorders, viral infections, and other diseases. The clinical application of protein therapeutics has been impeded by pharmacokinetic and pharmacodynamic challenges including off-target toxicity, rapid clearance, and drug stability. Strategies for the localized and sustained delivery of protein therapeutics have shown promise in addressing these challenges. Hydrogels are critical materials that enable these delivery strategies. Supramolecular hydrogels composed of self-assembled materials have demonstrated biocompatibility advantages over polymer hydrogels, with peptide and protein-based gels showing strong potential. However, cost is a significant drawback of peptide-based supramolecular hydrogels. Supramolecular hydrogels composed of inexpensive low-molecular-weight (LMW) gelators, including modified amino acid derivatives, have been reported as viable alternatives to peptide-based materials. Herein, we report the encapsulation and release of proteins from supramolecular hydrogels composed of perfluorinated fluorenylmethyloxcarbonyl-modified phenylalanine (Fmoc-F₅-Phe-DAP). Specifically, we demonstrate release of four model proteins (ribonuclease A (RNase A), trypsin inhibitor (TI), bovine serum albumin (BSA), and human immunoglobulin G (IgG)) from these hydrogels. The emergent viscoelastic properties of these materials are characterized, and the functional and time-dependent release of proteins from the hydrogels is demonstrated. In addition, it is shown that the properties of the aqueous solution used for hydrogel formulation have a significant influence on the in vitro release profiles, as a function of the isoelectric point and molecular weight of the protein payloads. These studies collectively validate that this class of supramolecular LMW hydrogel possesses the requisite properties for the sustained and localized release of protein therapeutics.

Thiolated Polymeric Hydrogels for Biomedical Applications: A Review

Hydrogels are a three-dimensional (3D) network of hydrophilic polymers. The physical and chemical crosslinking of polymeric chains maintains the structure of the hydrogels even when they are swollen in water. They can be modified with thiol by thiol epoxy, thiol-ene, thiol-disulfide, or thiol-one reactions. Their application as a matrix for protein and drug delivery, cellular immobilization, regenerative medicine, and scaffolds for tissue engineering was initiated in the early 21st century. This review focuses on the ingredients, classification techniques, and applications of hydrogels, types of thiolation by different thiol-reducing agents, along with their mechanisms. In this study, different applications for polymers used in thiolated hydrogels, including dextran, gelatin, polyethylene glycol (PEG), cyclodextrins, chitosan, hyaluronic acid, alginate, poloxamer, polygalacturonic acid, pectin, carrageenan gum, arabinoxylan, carboxymethyl cellulose (CMC), gellan gum, and polyvinyl alcohol (PVA) are reviewed.

Protein Stabilization by Alginate Binding and Suppression of Thermal Aggregation

Polymers designed to stabilize proteins exploit direct interactions or crowding, but mechanisms underlying increased stability or reduced aggregation are rarely established. Alginate is widely used to encapsulate proteins for drug delivery and tissue regeneration despite limited knowledge of its impact on protein stability. Here, we present evidence that alginate can both increase protein folding stability and suppress the aggregation of unfolded protein through direct interactions without crowding. We used a fluorescence-based conformational reporter of two proteins, the metabolic protein phosphoglycerate kinase (PGK) and the hPin1 WW domain to monitor protein stability and aggregation as a function of temperature and the weight percent of alginate in solution. Alginate stabilizes PGK by up to 14.5 °C, but stabilization is highly protein-dependent, and the much smaller WW domain is stabilized by only 3.5 °C against thermal denaturation. Stabilization is greatest at low alginate weight percent and decreases at higher alginate concentrations. This trend cannot be explained by crowding, and ionic screening suggests that alginate stabilizes proteins through direct interactions with a significant electrostatic component. Alginate also strongly suppresses aggregation at high temperature by irreversibly associating with unfolded proteins and preventing refolding. Both the beneficial and negative impacts of alginate on protein stability and aggregation have important implications for practical applications.

Hydrolytically Degradable PEG-Based Inverse Electron Demand Diels-Alder Click Hydrogels

Hydrogels cross-linked by inverse electron demand Diels–Alder (iEDDA) click chemistry are increasingly used in biomedical applications. With a few exceptions in naturally derived and chemically modified macromers, iEDDA click hydrogels exhibit long-term hydrolytic stability, and no synthetic iEDDA click hydrogels can undergo accelerated and tunable hydrolytic degradation. We have previously reported a novel method for synthesizing norbornene (NB)-functionalized multiarm poly(ethylene glycol) (PEG), where carbic anhydride (CA) was used to replace 5-norbornene-2-carboxylic acid. The new PEGNB_CA-based thiol-norbornene hydrogels exhibited unexpected fast yet highly tunable hydrolytic degradation. In this contribution, we leveraged the new PEGNB_CA macromer for forming iEDDA click hydrogels with [methyl]tetrazine ([m]Tz)-modified macromers, leading to the first group of synthetic iEDDA click hydrogels with highly tunable hydrolytic degradation kinetics. We further exploited Tz and mTz dual conjugation to achieve tunable hydrolytic degradation with an in vitro degradation time ranging from 2 weeks to 3 months. Finally, we demonstrated the excellent in vitro cytocompatibility and in vivo biocompatibility of the new injectable PEGNB_CA-based iEDDA click cross-linked hydrogels.

Stochastic Lattice-Based Modeling of Macromolecule Release from Degradable Hydrogel

A three-dimensional lattice-based model has been developed to describe the release of a macromolecular drug encapsulated in a degradable hydrogel. The degradation-induced network heterogeneity is considered by assigning varying diffusion coefficients to the lattice sites based on the fitted exponential node-diffusivity relationship. As time passes, due to the degradation of crosslink nodes, diffusivity values in lattice sites progress to lower values. To overcome the size limitation of the computational model and to compare it with experimental data, a scaling ratio based on the random walk equation is developed. The model was able to describe the experimental release data from chemically crosslinked dextran hydrogels. The results showed that the effect of the initial network and the chemistry of crosslink nodes (hydrolysis rate) on the drug release profile cannot be decoupled.

CCL21 and beta-cell antigen releasing hydrogels as tolerance-inducing therapy in Type I diabetes

Type-I Diabetes (T1D) is caused by defective immunotolerance mechanisms enabling autoreactive T cells to escape regulation in lymphoid organs and destroy insulin-producing β-cells in the pancreas, leading to insulin dependence. Strategies to promote β-cell tolerance could arrest T1D. We previously showed that secretion of secondary lymphoid chemokine CCL21 by CCL21 transgenic β-cells induced tolerance and protected non-obese diabetic (NOD) mice from T1D. T1D protection was associated with formation of lymph node-like stromal networks containing tolerogenic fibroblastic reticular cells (FRCs). Here, we developed a polyethylene glycol (PEG) hydrogel platform with hydrolytically degradable PEG-diester dithiol crosslinkers to provide controlled and sustained delivery of CCL21 and β-cell antigens for at least 28 days in vitro and recapitulate properties associated with the tolerogenic environment of CCL21 transgenic β-cells in our previous studies. CCL21 and MHC-II restricted antigens were tethered to gels via simple click-chemistry while MHC-I restricted antigens were loaded in PEG-based polymeric nanovesicles and incorporated in the gel networks. CCL21 and antigen release kinetics depended on the PEG gel tethering strategy and the linkers. Importantly, in vitro functionality, chemotaxis, and activation of antigen-specific T cells were preserved. Implantation of CCL21 and β-cell antigen gels under the kidney capsule of pre-diabetic NOD mice led to enrichment of adoptively transferred antigen-specific T cells, formation of gp38 + FRC-like stromal cell networks, and increased regulation of specific T cells with reduced accumulation within pancreatic islets. Thus, our platform for sustained release of β-cell antigens and CCL21 immunomodulatory molecule could enable the development of antigen-specific tolerance therapies for T1D.

Extracellular Optogenetics at the Interface of Synthetic Biology and Materials Science

We review fundamental mechanisms and applications of OptoGels: hydrogels with light-programmable properties endowed by photoswitchable proteins (“optoproteins”) found in nature. Light, as the primary source of energy on earth, has driven evolution to develop highly-tuned functionalities, such as phototropism and circadian entrainment. These functions are mediated through a growing family of optoproteins that respond to the entire visible spectrum ranging from ultraviolet to infrared by changing their structure to transmit signals inside of cells. In a recent series of articles, engineers and biochemists have incorporated optoproteins into a variety of extracellular systems, endowing them with photocontrollability. While other routes exist for dynamically controlling material properties, light-sensitive proteins have several distinct advantages, including precise spatiotemporal control, reversibility, substrate selectivity, as well as biodegradability and biocompatibility. Available conjugation chemistries endow OptoGels with a combinatorially large design space determined by the set of optoproteins and polymer networks. These combinations result in a variety of tunable material properties. Despite their potential, relatively little of the OptoGel design space has been explored. Here, we aim to summarize innovations in this emerging field and highlight potential future applications of these next generation materials. OptoGels show great promise in applications ranging from mechanobiology, to 3D cell and organoid engineering, and programmable cell eluting materials.

Development of a nanocapsule-loaded hydrogel for drug delivery for intraperitoneal administration

Intraperitoneal (IP) drug delivery of chemotherapeutic agents, administered through hyperthermal intraperitoneal chemotherapy (HIPEC) and pressurized intraperitoneal aerosolized chemotherapy (PIPAC), is effective for the treatment of peritoneal malignancies. However, these therapeutic interventions are cumbersome in terms of surgical practice and are often associated with the formation of peritoneal adhesions, due to the catheters inserted into the peritoneal cavity during these procedures. Hence, there is a need for the development of drug delivery systems that can be administered into the peritoneal cavity. In this study, we have developed a nanocapsule (NCs)-loaded hydrogel for drug delivery in the peritoneal cavity. The hydrogel has been developed using poly(ethylene glycol) (PEG) and thiol-maleimide chemistry. NCs-loaded hydrogels were characterized by rheology and their resistance to dilution and drug release were determined in vitro. Using IVIS® to measure individual organ and recovered gel fluorescence intensity, an in vivo imaging study was performed and demonstrated that NCs incorporated in the PEG gel were retained in the IP cavity for 24 h after IP administration. NCs-loaded PEG gels could find potential applications as biodegradable, drug delivery systems that could be implanted in the IP cavity, for example at a the tumour resection site to prevent recurrence of microscopic tumours.

Adsorption and Sustained Delivery of Small Molecules from Nanosilicate Hydrogel Composites

Two-dimensional nanosilicate particles (NS) have shown promise for the prolonged release of small-molecule therapeutics while minimizing burst release. When incorporated in a hydrogel, the high surface area and charge of NS enable electrostatic adsorption and/or intercalation of therapeutics, providing a lever to localize and control release. However, little is known about the physio-chemical interplay between the hydrogel, NS, and encapsulated small molecules. Here, we fabricated polyethylene glycol (PEG)-NS hydrogels for the release of model small molecules such as acridine orange (AO). We then elucidated the effect of NS concentration, NS/AO incubation time, and the ability of NS to freely associate with AO on hydrogel properties and AO release profiles. Overall, NS incorporation increased the hydrogel stiffness and decreased swelling and mesh size. When individual NS particles were embedded within the hydrogel, a 70-fold decrease in AO release was observed compared to PEG-only hydrogels, due to adsorption of AO onto NS surfaces. When NS was pre-incubated and complexed with AO prior to hydrogel encapsulation, a >9000-fold decrease in AO release was observed due to intercalation of AO between NS layers. Similar results were observed for other small molecules. Our results show the potential for use of these nanocomposite hydrogels for the tunable, long-term release of small molecules.

Xanthan-gelatin and xanthan-gelatin-keratin wound dressings for local delivery of Vitamin C

Recently, functional dressings that can protect the wound area from dehydration and bacterial infection and support healing have gained importance in place of passive dressings. This study aimed to develop temporary and regenerative xanthan/gelatin (XGH) and keratin/xanthan/gelatin hydrogels (KXGHs) that have high absorption capacity and applicability as a wound dressing that can provide local delivery of Vitamin C (VC). Firstly, xanthan/gelatin hydrogels were produced by crosslinking with different glycerol concentrations and characterized to determine the hydrogel composition. According to their weight ratios, xanthan, gelatin, and glycerol hydrogels are named. If their weight ratio is 1:1:2 (w/w/w), the group name is selected as X1:GEL1:GLY2. X1:GEL1:GLY2 hydrogel was selected for biocompatibility, mechanical property, water vapor transmission rate (WVTR), and porosity. The addition of keratin to X1:GEL1:GLY2 improved L929 fibroblasts viability and increased protein release. Water vapor transmission of XGHs and KXGHs was between 3059.09 ± 126 and 4523 ± 133 g m^-2 d^-1; therefore, they can be suitable for granulating, low to moderate exudate wounds. XGH and KXGHs loaded with VC had higher water uptake, making it more convenient for exudate wounds. VC was released for 100 h, and VC containing XGHs and KXGHs increased the collagen synthesis of L929 fibroblasts. All of the hydrogels (XGH, KXGH, and VC-KXGHs) inhibited the bacteria transmission. In conclusion, our results suggest that VC-XGH and VC-KXGH can be candidates for temporary wound dressing materials for skin wounds.

Fabrication Parameter-Dependent Physico-Chemical Properties of Thiolated Gelatin/PEGDA Interpenetrating Network Hydrogels

BACKGROUND

The development of three-dimensional hydrogels using polymeric biomaterials is a key technology for tissue engineering and regenerative medicine. Successful tissue engineering requires the control and identification of the physicochemical properties of hydrogels.

METHODS

Interpenetrating network (IPN) hydrogel was developed using thiolated gelatin (GSH) and poly(ethylene glycol) diacrylate (PEGDA), with the aid of ammonium persulfate (APS) and N,N,N,N'-tetramethylethylenediamine (TEMED) as radical initiators. Each component was prepared in the following concentrations, respectively: 2.5 and 5% GSH (LG and HG), 12.5 and 25% PEGDA (LP and HP), 3% APS/1.5% TEMED (LI), and 4% APS/2% TEMED (HI). IPN hydrogel was fabricated by the mixing of GSH, PEGDA, and initiators in 5:4:1 volume ratios, and incubated at 37 °C for 30 min in the following 6 experimental formulations: (1) HG-LP-LI, (2) HG-LP-HI, (3) LG-HP-LI, (4) LG-HP-HI, (5) HG-HP-HI, and (6) HG-HP-LI. Herein, the physico-chemical characteristics of IPN hydrogels, including their morphological structures, hydrolytic degradation properties, mechanical properties, embedded protein release kinetics, and biocompatibility, were investigated.

RESULTS

The characteristics of the hydrogel were significantly manipulated by the concentration of the polymer, especially the conversion between HP and LP, rather than the concentration of the initiator, and no hydrogel formulation exhibited any toxicity to fibroblast and HaCaT cells.

CONCLUSION

We provide structural-physical relationships of the hydrogels by which means their physical properties could be conveniently controlled through component control, which could be versatilely utilized for various organizational engineering strategies.

Stability of proteins encapsulated in Michael-type addition polyethylene glycol hydrogels

Degradable polyethylene glycol (PEG) hydrogels are excellent vehicles for sustained drug release due to their biocompatibility, tunable physical properties, and customizable degradation. However, protein therapeutics are unstable under physiological conditions and releasing degraded or inactive therapeutics can induce immunogenic effects. While controlling protein release from PEG hydrogels has been extensively investigated, few studies have detailed protein stability long-term or under stress conditions. Here, lysozyme and alcohol dehydrogenase (ADH) stability were explored upon encapsulation in PEG hydrogels formed through Michael-type addition. The stability and structure of the two model proteins were monitored by measuring the free energy of unfolding and fluoresce quenching when confined in a hydrogel and compared to PEG solution and buffer. Hydrogels destabilized lysozyme structure at low denaturant concentrations but prevented complete unfolding at high concentrations. ADH was stabilized as the confining mesh size approached the protein radius of gyration. Both proteins retained enzymatic activity within the hydrogels under stress conditions, including denaturant, high temperature, and agitation. Conjugation between lysozyme and PEG-acrylate was identified at long reaction times but no conjugation was observed in the time required for complete gelation. Studies of protein stability in PEG hydrogels, as the one detailed here, can lead to designer technologies for the improved formulation, storage, and delivery of protein therapeutics.

Screen Printing Tissue Models Using Chemically Cross-Linked Hydrogel Systems: A Simple Approach To Efficiently Make Highly Tunable Matrices

In vitro models provide a good starting point for drug screening and understanding various cellular mechanisms corresponding to different conditions. 3D cultures have drawn significant interest to mimic the in vivo microenvironment better and overcome the limitations of the 2D monolayered cultures. We previously reported a technique based on the screen printing process to pattern live mammalian cells using gelatin as the bioink. Even though gelatin is an inexpensive scaffolding material with various tissue engineering applications, it might not be the ideal hydrogel material to provide various mechanical and chemical cues to the cells. In this paper, we discuss the synthesis and characterization of two synthetic chemically cross-linked hydrogel systems based on poly(ethylene glycol) (PEG) and poly-l-lysine (PLL) to be used as the bioink in the screen printing process. These hydrogels are suitable as the bioinks for the screen printing process and serve as the barebone materials that can be tuned mechanically and augmented chemically to create a suitable in vitro microenvironment for the cells. This paper presents the synthesis, mechanical testing, and characterization of the hydrogel systems and their applications in the screen printing process.

Microfluidic Chip Device for In Situ Mixing and Fabrication of Hydrogel Microspheres via Michael-Type Addition

Hydrogel microspheres are sought for a variety of biomedical applications, including therapeutic and cellular delivery, sensors, and lubricants. Robust fabrication of hydrogel microspheres with uniform sizes and properties can be achieved using microfluidic systems that rely on droplet formation and subsequent gelation to form microspheres. Such systems work well when gelation is initiated after droplet formation but are not practical for timed gelation systems where gelation is initiated prior to droplet formation; premature gelation can lead to device blockage, variable microsphere diameter due to viscosity changes in the precursor solution, and limited numbers of microspheres produced in a single run. To enable microfluidic fabrication of microspheres from timed gelation hydrogel systems, an in situ mixing region is needed so that various hydrogel precursor components can be added separately. Here, we designed and evaluated three mixing devices for their effectiveness at mixing hydrogel precursor solutions prior to droplet formation and subsequent gelation. The serpentine geometry was found to be the most effective and was further improved with the inclusion of a pillar array to increase agitation. The optimized device was shown to fully mix precursor solutions and enable the fabrication of monodisperse polyethylene glycol microspheres, offering great potential for use with timed gelation hydrogel systems.

Translational Applications of Hydrogels

Advances in hydrogel technology have unlocked unique and valuable capabilities that are being applied to a diverse set of translational applications. Hydrogels perform functions relevant to a range of biomedical purposes-they can deliver drugs or cells, regenerate hard and soft tissues, adhere to wet tissues, prevent bleeding, provide contrast during imaging, protect tissues or organs during radiotherapy, and improve the biocompatibility of medical implants. These capabilities make hydrogels useful for many distinct and pressing diseases and medical conditions and even for less conventional areas such as environmental engineering. In this review, we cover the major capabilities of hydrogels, with a focus on the novel benefits of injectable hydrogels, and how they relate to translational applications in medicine and the environment. We pay close attention to how the development of contemporary hydrogels requires extensive interdisciplinary collaboration to accomplish highly specific and complex biological tasks that range from cancer immunotherapy to tissue engineering to vaccination. We complement our discussion of preclinical and clinical development of hydrogels with mechanical design considerations needed for scaling injectable hydrogel technologies for clinical application. We anticipate that readers will gain a more complete picture of the expansive possibilities for hydrogels to make practical and impactful differences across numerous fields and biomedical applications.

Microfluidic fabrication of imageable and resorbable polyethylene glycol microspheres for catheter embolization

Radiopaque and degradable hydrogel microspheres have a range of potential uses in medicine including proper placement of embolic material during occlusion procedures, acting as inherently embolic materials, and serving as drug carriers that can be located after injection. Current methods for creating radiopaque microspheres are either unable to fully and homogeneously incorporate radiopaque material throughout the microspheres for optimal imaging capabilities, do not result in degradable or fully compressible microspheres, or require elaborate, time-consuming preparation. We used a simple one-step microfluidic method to fabricate imageable, degradable polyethylene glycol (PEG) microspheres of varying sizes with homogenous dispersion of barium sulfate-a biocompatible, high-radiopacity contrast agent. The imageability of the microspheres was characterized using optical microscopy and microcomputed tomography as a function of barium sulfate loading. Microspheres with 20% wt/vol barium sulfate had a mean CT attenuation value of 1,510 HU, similar to that of cortical bone, which should enable visualization with soft tissue. Compared with unloaded microspheres, barium sulfate-loaded ones saw an increase in gelation and degradation times and storage modulus and decrease in swelling. Imageable microspheres retained compressibility and were injectable via catheter. The developed radiopaque, degradable PEG microspheres have various potential uses for interventional radiologists and imaging laboratories.

Development of Nanosilicate-Hydrogel Composites for Sustained Delivery of Charged Biopharmaceutics

Nanocomposite hydrogels containing two-dimensional nanosilicates (NS) have emerged as a new technology for the prolonged delivery of biopharmaceuticals. However, little is known about the physical-chemical properties governing the interaction between NS and proteins and the release profiles of NS-protein complexes in comparison to traditional poly(ethylene glycol) (PEG) hydrogel technologies. To fill this gap in knowledge, we fabricated a nanocomposite hydrogel composed of PEG and laponite and identified simple but effective experimental conditions to obtain sustained protein release, up to 23 times slower as compared to traditional PEG hydrogels, as determined by bulk release experiments and fluorescence correlation spectroscopy. Slowed protein release was attributed to the formation of NS-protein complexes, as NS-protein complex size was inversely correlated with protein diffusivity and release rates. While protein electrostatics, protein concentration, and incubation time were important variables to control protein-NS complex formation, we found that one of the most significant and less appreciated variable to obtain a sustained release of bioactive proteins was the buffer chosen for preparing the initial suspension of NS particles. The buffer was found to control the size of nanoparticles, the absorption potential, morphology, and stiffness of hydrogels. From these studies, we conclude that the PEG-laponite composite fabricated is a promising new platform for sustained delivery of positively charged protein therapeutics.

Controllable multi-phase protein release from in-situ hydrolyzable hydrogel

Using hydrogels to control the long-term release of protein remains challenging, especially for in-situ forming formulations. The uncontrollable burst release in the initial phase, the halted release in the subsequent phase, and the undesired drug dumping at the late stage are some obstacles hydrogel-based depots commonly encounter. In this study, we report hydrolyzable dextran-based hydrogels crosslinked by Michael addition to demonstrate a systematic solution to solve these problems. First, the polymer concentration was used as the critical parameter to control the proportion of releasable versus physically trapped protein molecules in the initial hydrogel meshwork. Subsequently, the dynamic change of the hydrogel meshwork was modulated by the crosslinking density and the cleavage rate of ester linkers. To this end, we designed and synthesized a series of ester linkers with hydrolytic half-life ranging from 4 h to 4 months and incorporate them into the hydrogel. Controlled release was demonstrated for model proteins varied in size, including lysozyme (14 kDa), bovine serum albumin (66 kDa), immunoglobulin G (150 kDa), and bevacizumab (149 kDa). In particular, sustained release of IgG ranging from 10 days to 8 months was achieved. Lastly, a tunable multi-phase release profile was made feasible by incorporating multiple ester linkers into one hydrogel formulation. The linker's half-life determined each phase's release duration, and the linkers' mixing ratio determined the corresponding release fraction. The reported hydrogel design engenders a versatile platform to address the needs for long-term and readily adjustable protein release for biomedical applications.

Gelatin Hydrogels Loaded with Lactoferrin-Functionalized Bio-Nanosilver as a Potential Antibacterial and Anti-Biofilm Dressing for Infected Wounds: Synthesis, Characterization, and Deciphering of Cytotoxicity

Gelatin hydrogels are attractive for wound applications owing to their well-defined structural, physical, and chemical properties as well as good cell adhesion and biocompatibility. This study aimed to develop gelatin hydrogels incorporated with bio-nanosilver functionalized with lactoferrin (Ag-LTF) as a dual-antimicrobial action dressing, to be used in treating infected wounds. The hydrogels were cross-linked using genipin prior to loading with Ag-LTF and characterized for their physical and swelling properties, rheology, polymer and actives interactions, and in vitro release of the actives. The hydrogel's anti-biofilm and antibacterial performances against S. aureus and P. aeruginosa as well as their cytotoxicity effects were assessed in vitro, including primary wound healing gene expression of human dermal fibroblasts (HDFs). The formulated hydrogels showed adequate release of AgNPs and LTF, with promising antimicrobial effects against both bacterial strains. The Ag-LTF-loaded hydrogel did not significantly interfere with the normal cellular functions as no alteration was detected for cell viability, migration rate, and expression of the target genes, suggesting the nontoxicity of Ag-LTF as well as the hydrogels. In conclusion, Ag-LTF-loaded genipin-cross-linked gelatin hydrogel was successfully synthesized as a new approach for fighting biofilms in infected wounds, which may be applied to accelerate healing of chronic wounds.

Hypoxia-responsive nanogel as IL-12 carrier for anti-cancer therapy

In the past two decades, protein drugs have evolved to become the most successful and important strategy in cancer therapy. However, systematical administration of protein drugs may cause serious side effects. In order to prepare a new promising hydrophilic drugs carrier, we constructed a PEGylated hyaluronic acid nanogel (NI-MAHA-PEG nanogel) with hypoxia and enzymatic responsiveness, which can selectively release hydrophilic drugs interleukin-12 (IL-12) on demand in a tumor microenvironment. We observed that release of IL-12 from nanogels by hypoxia-responsive stimulation, nanogels have anti-tumor effects on melanoma. Compared with physiological conditions, the IL-12 release rate has achieved remarkable growth under hypoxic conditions. Similarly, the drug release rate increased significantly with the addition of 500 U ml^-1 hyaluronidase. We provide a novel strategy to allow efficient delivery, on-demand release, and enhanced access of proteins to hypoxic tumor regions. The rational design of this nanogels drug delivery system can further explore the use of various drugs to treat many cancers.

Encapsulation of BSA in hybrid PEG hydrogels: stability and controlled release

Hybrid hydrogels based on silylated polyethylene glycol, Si-PEG, were evaluated as hybrid matrices able to trap, stabilize and release bovine serum albumin (BSA) in a controlled manner. Parameters of the inorganic condensation reaction leading to a siloxane (Si–O–Si) three dimensional network were carefully investigated, in particular the temperature, the surrounding hygrometry and the Si-PEG concentration. The resulting hydrogel structural features affected the stability, swelling, and mechanical properties of the network, leading to different protein release profiles. Elongated polymer assemblies were observed, the length of which ranged from 150 nm to over 5 μm. The length could be correlated to the Si–O–Si condensation rate from 60% (hydrogels obtained at 24 °C) to about 90% (xerogels obtained at 24 °C), respectively. Consequently, the controlled release of BSA could be achieved from hours to several weeks, with respect to the fibers' length and the condensation rate. The protein stability was evaluated by means of a thermal study. The main results gave insight into the biomolecule structure preservation during polymerisation, with ΔG < 0 for encapsulated BSA in any conditions, below the melting temperature (65 °C).

Silylated hybrid hydrogels of polyethylene glycol were designed to trap, stabilize and release a model protein (bovine serum albumin). Fine-tuning sol–gel reactions lead to sustained release of BSA over weeks, with good insight of protein stability.

Micro-Clotting of Platelet-Rich Plasma Upon Loading in Hydrogel Microspheres Leads to Prolonged Protein Release and Slower Microsphere Degradation

Platelet-rich plasma (PRP) is an autologous blood product that contains a variety of growth factors (GFs) that are released upon platelet activation. Despite some therapeutic potential of PRP in vitro, in vivo data are not convincing. Bolus injection of PRP is cleared rapidly from the body diminishing its therapeutic efficacy. This highlights a need for a delivery vehicle for a sustained release of PRP to improve its therapeutic effect. In this study, we used microfluidics to fabricate biodegradable PRP-loaded polyethylene glycol (PEG) microspheres. PRP was incorporated into the microspheres as a lyophilized PRP powder either as is (powder PRP) or first solubilized and pre-clotted to remove clots (liquid PRP). A high PRP loading of 10% w/v was achieved for both PRP preparations. We characterized the properties of the resulting PRP-loaded PEG microspheres including swelling, modulus, degradation, and protein release as a function of PRP loading and preparation. Overall, loading powder PRP into the PEG microspheres significantly affected the properties of microspheres, with the most pronounced effect noted in degradation. We further determined that microsphere degradation in the presence of powder PRP was affected by platelet aggregation and clotting. Platelet aggregation did not prevent but prolonged sustained PRP release from the microspheres. The delivery system developed and characterized herein could be useful for the loading and releasing of PRP to promote tissue regeneration and wound healing or to suppress tissue degeneration in osteoarthritis, and intervertebral disc degeneration.

Construction from Destruction: Hydrogel Formation from Triggered Depolymerization-Based Release of an Enzymatic Catalyst

Biomimetic systems that undergo macroscopic phase transformations by transducing and amplifying external cues are highly desirable for applications such as self-healing. Here, we report self-assembly of polyelectrolyte complexes into a vesicular structure that can accommodate hydrophilic guest molecules, including enzymes. Triggered depolymerization of one of the polyelectrolyte molecules in the complex causes the vesicle to disassemble and release its contents. Such a triggered release of enzymes causes molecular-scale events to be amplified due to the enzyme's catalytic properties. This feature has been utilized to demonstrate construction of hydrogels from the destruction of nanoscopic polymeric vesicles. The design principles developed here are broadly adaptable to other triggerable depolymerization motifs reported in the literature.

Biodegradable polyethylene glycol hydrogels for sustained release and enhanced stability of rhGALNS enzyme

Mucopolysaccharidosis IVA (Morquio A disease) is a genetic disorder caused by deficiency of N-acetylgalactosamine-6-sulfate-sulfatase (GALNS), leading to accumulation of keratan sulfate and chondroitin-6-sulfate in lysosomes. Many patients become wheelchair-dependent as teens, and their life span is 20-30 years. Currently, enzyme replacement therapy (ERT) is the treatment of choice. Although it alleviates some symptoms, replacing GALNS enzyme poses several challenges including very fast clearance from circulation and instability at 37 °C. These constraints affect frequency and cost of enzyme infusion and ability to reach all tissues. In this study, we developed injectable and biodegradable polyethylene glycol (PEG) hydrogels, loaded with recombinant human GALNS (rhGALNS) to improve enzyme stability and bioavailability, and to sustain release. We established the enzyme's release profile via bulk release experiments and determined diffusivity using fluorescence correlation spectroscopy. We observed that PEG hydrogels preserved enzyme activity during sustained release for 7 days. In the hydrogel, rhGALNS diffused almost four times slower than in buffer. We further confirmed that the enzyme was active when released from the hydrogels, by measuring its uptake in patient fibroblasts. The developed hydrogel delivery device could overcome current limits of rhGALNS replacement and improve quality of life for Morquio A patients. Encapsulated GALNS enzyme in a polyethylene glycol hydrogel improves GALNS stability by preserving its activity, and provides sustained release for a period of at least 7 days.

Visible light mediated PVA-tyramine hydrogels for covalent incorporation and tailorable release of functional growth factors

PVA-Tyr hydrogel facilitated covalent incorporation can control release of pristine growth factors while retaining their native bioactivity.

Predicting Drug Release From Degradable Hydrogels Using Fluorescence Correlation Spectroscopy and Mathematical Modeling

Predicting release from degradable hydrogels is challenging but highly valuable in a multitude of applications such as drug delivery and tissue engineering. In this study, we developed a simple mathematical and computational model that accounts for time-varying diffusivity and geometry to predict solute release profiles from degradable hydrogels. Our approach was to use time snapshots of diffusivity and hydrogel geometry data measured experimentally as inputs to a computational model which predicts release profile. We used two model proteins of varying molecular weights: bovine serum albumin (BSA; 66 kDa) and immunoglobulin G (IgG; 150 kDa). We used fluorescence correlation spectroscopy (FCS) to determine protein diffusivity as a function of hydrogel degradation. We tracked changes in gel geometry over the same time period. Curve fits to the diffusivity and geometry data were used as inputs to the computational model to predict the protein release profiles from the degradable hydrogels. We validated the model using conventional bulk release experiments. Because we approached the hydrogel as a black box, the model is particularly valuable for hydrogel systems whose degradation mechanisms are not known or cannot be accurately modeled.

Bio-conjugation of platelet-rich plasma and alginate through carbodiimide chemistry for injectable hydrogel therapies

Alginate is a highly tailorable, biocompatible polymer whose properties can be tuned to mimic the properties of native nucleus pulposus (NP) tissue. Platelet-rich plasma (PRP) is a highly accessible, inexpensive, and readily available mix of pro-regenerative factors. By functionalizing alginate with PRP, a mechanically optimized, bioactive alginate NP analogue may stimulate NP cells to proliferate and accumulate matrix over a longer period of time than if the PRP were solely encapsulated within the hydrogel. In this study, PRP was chemically bound to alginate using carbodiimide chemistry and mechanically, physically, and cytologically compared to plain alginate as well as alginate containing free-floating lyophilized PRP. The alginates were mechanically and physically characterized; PRP-conjugated alginate had similar mechanical properties to controls and had the benefit of retained PRP proteins within the hydrogel. Human nucleus pulposus cells (hNPCs) were seeded within the modified alginates and cultured for 14 days. Quantification data of glycosaminoglycans suggests that PRP-incorporated alginate has the potential to increase ECM production within the characterized alginate constructs, and that PRP-functionalized alginate can retain protein within the hydrogel over time. This is the first study to functionalize the milieu of PRP proteins onto alginate and characterize the mechanical and physical properties of the modified alginates. This study also incorporates hNPCs into the characterized PRP-modified alginates to observe phenotypic maintenance when encapsulated within the in situ gelling constructs.

In situ injectable hydrogels for spinal cord regeneration: advances from the last 10 years

Spinal cord injury (SCI) is a tremendously devastating disorder with no effective therapy. Neuroprotective strategies have been applied aiming to prevent secondary cell death but no successful and robust effects have been observed. Recently, combinatorial approaches using biomaterials with cells and/or growth factors have demonstrated promising therapeutic effects because of the improvement of axonal growth and in vivo functional recovery in model organisms. In situ injectable hydrogels are a particularly attractive neuroregenerative approach to improve spinal cord repair and regeneration since they can be precisely injected into the lesion site filling the space prior to gelification, decrease scarring and promote axon growth due to the hydrogel's soft structure. Important advances regarding the use of hydrogels as potential therapeutic approaches has been reported during the last 10 years. Injectable alginate hydrogel loaded with GDNF, thermoresponsives heparin-poloxamer loaded with NGF and imidazole-poly(organophosphazenes) hydrogels are just three examples of biomaterials that can promote neurite, axon growth and improve functional recovery in hemisected and resected rats. Here we will review the status of in situ injectable hydrogels for spinal cord regeneration with special focus in the advantages of using hydrogel scaffolds, the ideal polymers to be used, the gelification process and the cells or growth factors combined. The in vitro and in vivo results reported for those biomaterials will be presented, compared and discussed.

Platelet-Rich Plasma Released From Polyethylene Glycol Hydrogels Exerts Beneficial Effects on Human Chondrocytes

Osteoarthritis (OA) is a debilitating joint disease resulting from chronic joint inflammation and erosion of articular cartilage. A promising biological treatment for OA is intra-articular administration of platelet-rich plasma (PRP). However, immediate bolus release of growth factors limits beneficial therapeutic effects of PRP, thus necessitating the demand for sustained release platforms. In this study, we evaluated the therapeutic value of PRP released from a polyethylene glycol (PEG) hydrogel on articular chondrocytes/cartilage explants derived from OA patients. Lyophilized PRP (PRGF) was encapsulated in PEG hydrogels at 10% w/v and hydrogel swelling, storage modulus and degradation and PRGF release kinetics were determined. PRGF releasate from the hydrogels was collected on day 1, 4, and 11. Encapsulation of PRGF at 10% w/v in PEG hydrogels had minimal effect on hydrogel properties. PRGF was released with an initial burst followed by sustained release until complete hydrogel degradation. Effect of PRGF releasates and bolus PRGF (1% w/v PRGF) on patient-derived cartilage explants or chondrocytes was assessed by chondrocyte proliferation (pico-green assay), gene expression for COL1A1, COL2A1, MMP13, COX2, and NFKB1 (real-time polymerase chain reaction), and measurement of nitric oxide concentration (Griess' assay). Compared to bolus PRGF, PRGF releasates enhanced chondrocyte proliferation, suppressed the expression of genes like MMP13, NFKB1, COL1A1, and COL2A1 and reduced levels of nitric oxide. Taken together, these results indicate that release of PRGF from PEG hydrogels may improve the therapeutic efficacy of PRP and merits further investigation in an animal model of OA. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2401-2410, 2019.

A Tumor-on-a-Chip System with Bioprinted Blood and Lymphatic Vessel Pair

Current in vitro anti-tumor drug screening strategies are insufficiently portrayed lacking true perfusion and draining microcirculation systems, which may post significant limitation in reproducing the transport kinetics of cancer therapeutics explicitly. Herein, we report the fabrication of an improved tumor model consisting of bioprinted hollow blood vessel and lymphatic vessel pair, hosted in a three-dimensional (3D) tumor microenvironment-mimetic hydrogel matrix, termed as the tumor-on-a-chip with bioprinted blood and lymphatic vessel pair (TOC-BBL). The bioprinted blood vessel was perfusable channel with opening on both ends while the bioprinted lymphatic vessel was blinded on one end, both of which were embedded in a hydrogel tumor mass, with vessel permeability individually tunable through optimization of the composition of the bioinks. We demonstrated that systems with different combinations of these bioprinted blood/lymphatic vessels exhibited varying levels of diffusion profiles for biomolecules and anti-cancer drugs. Our TOC-BBL platform mimicking the natural pathway of drug-tumor interactions would have the drug introduced through the perfusable blood vessel, cross the vascular wall into the tumor tissue via diffusion, and eventually drained into the lymphatic vessel along with the carrier flow. Our results suggested that this unique in vitro tumor model containing the bioprinted blood/lymphatic vessel pair may have the capacity of simulating the complex transport mechanisms of certain pharmaceutical compounds inside the tumor microenvironment, potentially providing improved accuracy in future cancer drug screening.

Non-aqueous, tissue compliant carbene-crosslinking bioadhesives

Surgical adhesives are an attractive alternative to traditional mechanical tissue fixation methods of sutures and staples. Ease of application, biocompatibility, enhanced functionality (drug delivery) are known advantages but weak adhesion strength in the wet environment and lack of tissue compliant behavior still pose a challenge. In order to address these issues, non-aqueous bioadhesive based on blends of polyamidoamine (PAMAM) dendrimer, conjugated with 4-[3-(trifluoromethyl)-3H-diazirin-3-yl] benzyl bromide (PAMAM-g-diazirine) and liquid polyethylene glycol (PEG 400) has been developed. PEG 400 biocompatible solvent reduces the viscosity of PAMAM-g-diazirine dendrimer without incorporating aqueous solvents or plasticizers, allowing application by syringe or spray. Upon UV activation, diazirine-generated reactive intermediates lead to intermolecular dendrimer crosslinking. The properties of the crosslinked matrix are tissue compliant, with anisotropic material properties dependent on the PEG 400 wt%, UV dose, pressure and uncured adhesive thickness. The hygroscopic PAMAM-g-diazirine/PEG 400 blend was hypothesized to absorb water at the tissue interface, leading to high interfacial adhesion, however porous matrices led to cohesive failure. The hydrophilic nature of the polyether backbone (PEG 400) shielded cationic PAMAM dendrimers with cured bioadhesive film displaying significantly less platelet activation than neat PAMAM-g-diazirine or PLGA thin films.

Biofunctionalized peptide-based hydrogel as an injectable scaffold for BDNF delivery can improve regeneration after spinal cord injury

BACKGROUND

The complex pathophysiological events occurring after traumatic spinal cord injuries (TSCI) make this devastating trauma still incurable. Peptide amphiphile (PA) hydrogels are nanobiomaterials displaying desirable properties for application in regenerative medicine because they are absorbable, injectable, allowing biofunctionalization, controlling release of trophic factors and mimic extracellular matrix (ECM). In this study, we explored the potentiality of the IKVAV-functionalized PA hydrogel to provide a permissive environment for cell migration and growth as well as sustained release of BDNF at the lesion after severe compression injury model.

METHODS

The IKVAV-functionalized PA was synthesized by automated solid-phase approach and its secondary structure was evaluated by Circular dichroism (CD) spectroscopy. The potential of IKVAV-functionalized PA to self-assemble into nanofibers and hydrogel formation were assessed using transmission electron microscopy (TEM). Release profiles of BDNF from hydrogel and the bioactivity of the released BDNF from hydrogel were determined using ELISA and DRG bioassay, respectively. Severe spinal cord injury was induced using clip compression at T7-T8 vertebral segment. Twenty four hours post-injury the animals were treated by either IKVAV PA hydrogel, BDNF-loaded IKVAV PA hydrogel, BDNF solution or saline. Two and six weeks later, animals were sacrificed and the lesion site was evaluated based on GFAP, CD68 and ß III tubulin immunoreactivity. Also, locomotor recovery was assessed during 6 weeks using Basso, Beattie, Bresnahan (BBB) scoring test.

RESULTS

The IKVAV PA arranged into nanofibrous structure and provided a sustained release of BDNF over 21 days while preserved the bioactivity of BDNF. Also, BDNF loading influenced the hydrogel nanostructure resulting in aligned orientation of nanofibers. Injection of BDNF-loaded IKVAV PA hydrogel resulted in a considerable axon preservation and astrogliosis reduction at 6 weeks post-injury without showing any inflammatory reaction. However, the BBB score was not statistically different between different treatment groups.

CONCLUSION

Although the locomotor functional recovery was not observed in this study, the axon preservation and minimal inflammation in animals treated with BDNF-incorporated hydrogel indicate the potentiality of the designed intervention for further evaluations in the path of developing efficient therapies for severe spinal cord injury.

Patterned Polyvinyl Alcohol Hydrogel Dressings with Stem Cells Seeded for Wound Healing

Polyvinyl alcohol (PVA) hydrogel and stem cell therapy have been widely used in wound healing. However, the lack of bioactivity for PVA and security of stem therapy limited their application. In this study, an adipose-derived stem cells (ADSCs)-seeded PVA dressing (ADSCs/PVA) was prepared for wound healing. One side of the PVA dressing was modified with photo-reactive gelatin (Az-Gel) via ultraviolet (UV) irradiation (Az-Gel@PVA), and thus ADSCs could adhere, proliferate on the PVA dressings and keep the other side of the dressings without adhering to the wound. The structure and mechanics of Az-Gel@PVA were determined by scanning electron microscopy (SEM) and material testing instruments. Then, the adhesion and proliferation of ADSCs were observed via cell counts and live-dead staining. Finally, in vitro and in vivo experiments were utilized to confirm the effect of ADSCs/PVA dressing for wound healing. The results showed that Az-Gel was immobilized on the PVA and showed little effect on the mechanical properties of PVA hydrogels. The surface-modified PVA could facilitate ADSCs adhesion and proliferation. Protein released tests indicated that the bioactive factors secreted from ADSCs could penetrated to the wound. Finally, in vitro and in vivo experiments both suggested the ADSCs/PVA could promote the wound healing via secreting bioactive factors from ADSCs. It was speculated that the ADSCs/PVA dressing could not only promote the wound healing, but also provide a new way for the safe application of stem cells, which would be of great potential for skin tissue engineering.

Templated Macroporous Polyethylene Glycol Hydrogels for Spheroid and Aggregate Cell Culture

Macroporous cell-laden hydrogels have recently gained recognition for a wide range of biomedical and bioengineering applications. There are various approaches to create porosity in hydrogels, including lyophilization or foam formation. However, many do not allow a precise control over pore size or are not compatible with in situ cell encapsulation. Here, we developed novel templated macroporous hydrogels by encapsulating uniform degradable hydrogel microspheres produced via microfluidics into a hydrogel slab. The microspheres degraded completely leaving macropores behind. Microsphere degradation was dependent on the incubation medium, microsphere size, microsphere confinement in the hydrogel as well as cell encapsulation. Uniquely, the degradable microspheres were biocompatible and when laden with cells, the cells were deposited in the macropores upon microsphere degradation and formed multicellular aggregates. The hydrogel-encapsulated cell aggregates were used in a small drug screen to demonstrate the relevance of cell-matrix interactions for multicellular spheroid drug responsiveness. Hydrogel-grown spheroid cultures are increasingly important in applications such as in vitro tumor, hepatocellular, and neurosphere cultures and drug screening; hence, the templated cell aggregate-laden hydrogels described here would find utility in various applications.

Combining sol–gel and microfluidics processes for the synthesis of protein-containing hybrid microgels

Biocompatible encapsulation of proteins in hybrid microgels of a silylated hydrogel, focused on soft procedures and cross-linking conditions.

RNA interfering molecule delivery from in situ forming biodegradable hydrogels for enhancement of bone formation in rat calvarial bone defects

RNA interference (RNAi) may be an effective and valuable tool for promoting the growth of functional tissue, as short interfering RNA (siRNA) and microRNA (miRNA) can block the expression of genes that have negative effects on tissue regeneration. Our group has recently reported that the localized and sustained presentation of siRNA against noggin (siNoggin) and miRNA-20a from in situ forming poly(ethylene glycol) (PEG) hydrogels enhanced osteogenic differentiation of encapsulated human bone marrow-derived mesenchymal stem cells (hMSCs). Here, the capacity of the hydrogel system to accelerate bone formation in a rat calvarial bone defect model is presented. After 12 weeks post-implantation, the hydrogels containing encapsulated hMSCs and miRNA-20a resulted in more bone formation in the defects than the hydrogels containing hMSCs without siRNA or with negative control siRNA. This localized and sustained RNA interfering molecule delivery system may provide an excellent platform for healing bony defects and other tissues.

STATEMENT OF SIGNIFICANCE

Delivery of RNAi molecules may be a valuable strategy to guide cell behavior for tissue engineering applications, but to date there have been no reports of a biomaterial system capable of both encapsulation of cells and controlled delivery of incorporated RNA. Here, we present PEG hydrogels that form in situ via Michael type reaction, and that permit encapsulation of hMSCs and the concomitant controlled delivery of siNoggin and/or miRNA-20a. These RNAs were chosen to suppress noggin, a BMP-2 antagonist, and/or PPAR-γ, a negative regulator of BMP-2-mediated osteogenesis, and therefore promote osteogenic differentiation of hMSCs and subsequent bone repair in critical-sized rat calvarial defects. Simultaneous delivery of hMSCs and miRNA-20a enhanced repair of these defects compared to hydrogels containing hMSCs without siRNA or with negative control siRNA. This in situ forming PEG hydrogel system offers an exciting platform for healing critical-sized bone defects by localized, controlled delivery of RNAi molecules to encapsulated hMSCs and surrounding cells.

Zwitterionic PEG-PC Hydrogels Modulate the Foreign Body Response in a Modulus-Dependent Manner

Reducing the foreign body response (FBR) to implanted biomaterials will enhance their performance in tissue engineering. Poly(ethylene glycol) (PEG) hydrogels are increasingly popular for this application due to their low cost, ease of use, and the ability to tune their compliance via molecular weight and cross-linking densities. PEG hydrogels can elicit chronic inflammation in vivo, but recent evidence has suggested that extremely hydrophilic, zwitterionic materials and particles can evade the immune system. To combine the advantages of PEG-based hydrogels with the hydrophilicity of zwitterions, we synthesized hydrogels with comonomers PEG and the zwitterion phosphorylcholine (PC). Recent evidence suggests that stiff hydrogels elicit increased immune cell adhesion to hydrogels, which we attempted to reduce by increasing hydrogel hydrophilicity. Surprisingly, hydrogels with the highest amount of zwitterionic comonomer elicited the highest FBR. Lowering the hydrogel modulus (165 to 3 kPa), or PC content (20 to 0 wt %), mitigated this effect. A high density of macrophages was found at the surface of implants associated with a high FBR, and mass spectrometry analysis of the proteins adsorbed to these gels implicated extracellular matrix, immune response, and cell adhesion protein categories as drivers of macrophage recruitment. Overall, we show that modulus regulates macrophage adhesion to zwitterionic-PEG hydrogels, and demonstrate that chemical modifications to hydrogels should be studied in parallel with their physical properties to optimize implant design.

Improving gelation efficiency and cytocompatibility of visible light polymerized thiol-norbornene hydrogels via addition of soluble tyrosine

Hydrogels immobilized with biomimetic peptides have been used widely for tissue engineering and drug delivery applications. Photopolymerization has been among the most commonly used techniques to fabricate peptide-immobilized hydrogels as it offers rapid and robust peptide immobilization within a crosslinked hydrogel network. Both chain-growth and step-growth photopolymerizations can be used to immobilize peptides within covalently crosslinked hydrogels. A previously developed visible light mediated step-growth thiol-norbornene gelation scheme has demonstrated efficient crosslinking of hydrogels composed of an inert poly(ethylene glycol)-norbornene (PEGNB) macromer and a small molecular weight bis-thiol linker, such as dithiothreitol (DTT). Compared with conventional visible light mediated chain-polymerizations where multiple initiator components are required, step-growth photopolymerized thiol-norbornene hydrogels are more cytocompatible for the in situ encapsulation of radical sensitive cells (e.g., pancreatic β-cells). This contribution explored visible light based crosslinking of various bis-cysteine containing peptides with macromer 8-arm PEGNB to form biomimetic hydrogels suitable for in situ cell encapsulation. It was found that the addition of soluble tyrosine during polymerization not only significantly accelerated gelation, but also improved the crosslinking efficiency of PEG-peptide hydrogels as evidenced by a decreased gel point and enhanced gel modulus. In addition, soluble tyrosine drastically enhanced the cytocompatibility of the resulting PEG-peptide hydrogels, as demonstrated by in situ encapsulation and culture of pancreatic MIN6 β-cells. This visible light based thiol-norbornene crosslinking mechanism provides an attractive gelation method for preparing cytocompatible PEG-peptide hydrogels for tissue engineering applications.

Reducible disulfide poly(beta-amino ester) hydrogels for antioxidant delivery

Recently, biomaterials have been designed to contain redox-sensitive moieties, such as thiols and disulfides, to impart responsive degradation and/or controlled release. However, due to the high sensitivity of cellular redox-based systems which maintain free-radical homeostasis (e.g. glutathione/glutathione disulfide), if these biomaterials modify the cellular redox environment, they may inadvertently affect cellular compatibility and/or oxidative stress defenses. In this work, we hypothesize that the degradation products of a poly(β-amino ester) (PBAE) hydrogel formed with redox sensitive disulfide (cystamine) crosslinking could serve as a supplement to the environmental cellular antioxidant defenses. Upon introduction into a reducing environment, these disulfide-containing hydrogels cleave to present bound-thiol groups, yet remain in the bulk form at up to 66 mol% cystamine of the total amines. By controlling the molar fraction of cystamine, it was apparent that the thiol content varied human umbilical vein endothelial cell (HUVEC) viability IC₅₀ values across an order of magnitude. Further, upon introduction of an enzymatic oxidative stress generator to the cell culture (HX/XO), pre-incubated thiolated hydrogel degradation products conferred cellular and mitochondrial protection from acute oxidative stress, whereas non-reduced disulfide-containing degradation products offered no protection. This polymer may be an advantageous implantable drug delivery system for use in acute oxidative stress prophylaxis and/or chronic oxidative stress cell therapies due to its solid/liquid reversibility in a redox environment, controlled thiolation, high loading capacity through covalent drug-addition, and simple post-synthesis modification which bound-thiols introduce.

STATEMENT OF SIGNIFICANCE

In this work, we demonstrate a unique property of disulfide containing degradable biomaterials. By changing the redox state of the degradation products (from oxidized to reduced), it is possible to increase the IC₅₀ of the material by an order of magnitude. This dramatic shift is linked directly to the oxidative stress response of the cells and suggests a possible mechanism by which one can tune the cellular response to degradable biomaterials.

Whispering gallery mode resonator sensor for in situ measurements of hydrogel gelation

Whispering gallery mode (WGM) resonators are compact and ultrasensitive devices, which enable label-free sensing at the single-molecule level. Despite their high sensitivity, WGM resonators have not been thoroughly investigated for use in dynamic biochemical processes including molecular diffusion and polymerization. In this work, the first report of using WGM sensors to continuously monitor a chemical reaction (i.e. gelation) in situ in a hydrogel is described. Specifically, we monitor and quantify the gelation dynamics of polyacrylamide hydrogels using WGM resonators and compare the results to an established measurement method based on rheology. Rheology measures changes in viscoelasticity, while WGM resonators measure changes in refractive index. Different gelation conditions were studied by varying the total monomer concentration and crosslinker concentration of the hydrogel precursor solution, and the resulting similarities and differences in the signal from the WGM resonator and rheology are elucidated. This work demonstrates that WGM alone or in combination with rheology can be used to investigate the gelation dynamics of hydrogels to provide insights into their gelation mechanisms.