Purification, molecular cloning, and expression of lipase from Pseudomonas aeruginosa

Medically Relevant Acinetobacter Species Require a Type II Secretion System and Specific Membrane-Associated Chaperones for the Export of Multiple Substrates and Full Virulence

Acinetobacter baumannii, A. nosocomialis, and A. pittii have recently emerged as opportunistic human pathogens capable of causing severe human disease; however, the molecular mechanisms employed by Acinetobacter to cause disease remain poorly understood. Many pathogenic members of the genus Acinetobacter contain genes predicted to encode proteins required for the biogenesis of a type II secretion system (T2SS), which have been shown to mediate virulence in many Gram-negative organisms. Here we demonstrate that Acinetobacter nosocomialis strain M2 produces a functional T2SS, which is required for full virulence in both the Galleria mellonella and murine pulmonary infection models. Importantly, this is the first bona fide secretion system shown to be required for virulence in Acinetobacter. Using bioinformatics, proteomics, and mutational analyses, we show that Acinetobacter employs its T2SS to export multiple substrates, including the lipases LipA and LipH as well as the protease CpaA. Furthermore, the Acinetobacter T2SS, which is found scattered amongst five distinct loci, does not contain a dedicated pseudopilin peptidase, but instead relies on the type IV prepilin peptidase, reinforcing the common ancestry of these two systems. Lastly, two of the three secreted proteins characterized in this study require specific chaperones for secretion. These chaperones contain an N-terminal transmembrane domain, are encoded adjacently to their cognate effector, and their disruption abolishes type II secretion of their cognate effector. Bioinformatic analysis identified putative chaperones located adjacent to multiple previously known type II effectors from several Gram-negative bacteria, which suggests that T2SS chaperones constitute a separate class of membrane-associated chaperones mediating type II secretion.

Characterization of the GbdR regulon in Pseudomonas aeruginosa

Pseudomonas aeruginosa displays tremendous metabolic diversity, controlled in part by the abundance of transcription regulators in the genome. We have been investigating P. aeruginosa's response to the host, particularly changes regulated by the host-derived quaternary amines choline and glycine betaine (GB). We previously identified GbdR as an AraC family transcription factor that directly regulates choline acquisition from host phospholipids (via binding to plcH and pchP promoters), is required for catabolism of the choline metabolite GB, and is an activator that induces transcription in response to GB or dimethylglycine. Our goal was to characterize the GbdR regulon in P. aeruginosa by using genetics and chemical biology in combination with transcriptomics and in vitro DNA-binding assays. Here we show that GbdR activation regulates transcription of 26 genes from 12 promoters, 11 of which have measureable binding to GbdR in vitro. The GbdR regulon includes the genes encoding GB, dimethylglycine, sarcosine, glycine, and serine catabolic enzymes and the BetX and CbcXWV quaternary amine transport proteins. We characterized the GbdR consensus binding site and used it to identify that the recently characterized acetylcholine esterase gene, choE (PA4921), is also regulated by GbdR. The regulon member not directly controlled by GbdR is the secreted lipase gene lipA, which was also the only regulon member repressed under GbdR-activating conditions. Determination of the GbdR regulon provides deeper understanding of how GbdR links bacterial metabolism and virulence. Additionally, identification of two uncharacterized regulon members suggests roles for these proteins in response to choline metabolites.

Hyper-activation of foldase-dependent lipase with lipase-specific foldase

The LST-03 lipase from Pseudomonas aeruginosa LST-03 requires lipase-specific foldase for activation. Abundant expression of the active lipase was successfully accomplished with individual expression of the lipase and foldase in a heterologous host and subsequent in vitro activation. Although the activity of the native lipase from culture supernatant of P. aeruginosa LST-03 was 110 kI.U./g, that after in vitro activation using individually expressed lipase and foldase was 228 kI.U./g. Furthermore, the activity after in vitro activation with afterwards adding calcium ions was 359 kI.U./g. However, the incubation of the lipase with the foldase in the presence of calcium ions resulted in a small conformational transition and low activation levels of the lipase by the foldase. The lipase showed high affinity for the foldase in the presence of calcium ions. The results indicate that in a cellular environment that contains calcium ions, the lipase would not become a hyperactive form by the foldase.

Cloning, sequencing, and characterization of lipase genes from a polyhydroxyalkanoate (PHA)-synthesizing Pseudomonas resinovorans

Lipase (lip) and lipase-specific foldase (lif) genes of a biodegradable polyhydroxyalkanoate (PHA)-synthesizing Pseudomonas resinovorans NRRL B-2649 were cloned using primers based on consensus sequences, followed by polymerase chain reaction-based genome walking. Sequence analyses showed a putative Lip gene product (314 amino acids, a.a.) with its catalytic active site (Ser(111), Asp(258), and His(280)) identified. The foldase lif gene that is located 55 bp downstream of lip codes for a putative Lif (345 a.a.). To verify the biological function of the cloned lip gene for lipase expression in P. resinovorans, we constructed a lip knock-out mutant (lip::Tn5<KAN-2>) by transposon insertion. Complementation of the lip knock-out P. resinovorans mutant with a lipase expression plasmid (pBS29-P2-lip) was performed, and its effect on lipase expression was investigated. The wild-type P. resinovorans and the lip::Tn5<KAN-2>[pBS29-P2-lip] recombinant (but not the lip::Tn5<KAN-2> mutant) showed fluorescence on rhodamine B plates indicative of lipase activity. The wild type exhibited extracellular lipase activity when grown on medium containing triacylglycerol substrates (tallow, olive oil, and tributyrin) as sole carbon sources, but the lip::Tn5<KAN-2> mutant did not show such activity. Lipase activity of various strains was also confirmed by TLC analysis of the composition of acylglycerols and free fatty acid in the extracts of the spent culture medium. We further found that tributyrin was more effective than olive oil in inducing lipase expression in P. resinovorans.

Enhancing functional production of a chaperone-dependent lipase in Escherichia coli using the dual expression cassette plasmid

BACKGROUND

The lipase subfamilies I.1 and I.2 show more than 33% homology in the amino acid sequences and most members share another common property that their genes are clustered with the secondary genes whose protein products are required for folding the lipase into an active conformation and secretion into the culture medium. In previous studies, the lipase (LipA) and its chaperone (LipB) from Ralstonia sp. M1 were overexpressed in E. coli and the lipase was successfully refolded in vitro. The purpose of this study was to enhance the production of the active lipase LipA from Ralstonia sp. M1 in the heterologous host E. coli without in vitro refolding process, using two-plasmid co-expression systems and dual expression cassette plasmid systems.

RESULTS

To produce more active lipase from Ralstonia sp. M1 in E. coli without in vitro refolding process but with the help of overexpression of the chaperone (LipB1 and LipB3 corresponding to 56-aa truncated and 26-aa truncated chaperone LipB), six different expression systems including 2 two-plasmid co-expression systems (E. coli BL21/pELipABa + pELipB1k and BL21/pELipABa + pELipB3k) and 4 dual expression cassette plasmid systems (BL21/pELipAB-LipB1a, BL21/pELipAB-LipB3a, BL21/pELipA-LipB1a, and BL21/pELipA-LipB3a) were constructed. The two-plasmid co-expression systems (E. coli BL21/pELipABa + pELipB1k and BL21/pELipABa + pELipB3k) produced the active lipase at a level of 4 times as high as the single expression cassette plasmid system E. coli BL21/pELipABa did. For the first time, the dual expression cassette plasmid systems BL21/pELipAB-LipB1a and BL21/pELipAB-LipB3a yielded 29- and 19-fold production of the active lipase in comparison with the single expression cassette plasmid system E. coli BL21/pELipABa, respectively. Although the lipase amount was equally expressed in all these expression systems (40% of total cellular protein) and only a small fraction of the overexpressed lipase was folded in vivo into the functional lipase in soluble form whereas the main fraction was still inactive in the form of inclusion bodies. Another controversial finding was that the dual expression cassette plasmid systems E. coli BL21/pELipAB-LipB1a and E. coli/pELipAB-LipB3a secreted the active lipase into the culture medium of 51 and 29 times as high as the single expression cassette plasmid system E. coli pELipABa did, respectively, which has never been reported before. Another interesting finding was that the lipase form LipA6xHis (mature lipase fused with 6× histidine tag) expressed in the dual expression cassette plasmid systems (BL21/pELipA-LipB1a and BL21/pELipA-LipB3a) showed no lipase activity although the expression level of the lipase and two chaperone forms LipB1 and LipB3 in these systems remained as high as that in E. coli BL21/pELipABa + pELipB1k, BL21/pELipABa + pELipB3k, BL21/pELipAB-LipB1a, and BL21/pELipAB-LipB3a. The addition of Neptune oil or detergents into the LB medium increased the lipase production and secretion by up to 94%.

CONCLUSIONS

Our findings demonstrated that a dual expression cassette plasmid system E. coli could overproduce and secrete the active chaperone-dependent lipase (subfamilies I.1 and I.2) in vivo and an improved dual expression cassette plasmid system E. coli could be potentially applied for industrial-scale production of subfamily I.1 and I.2 lipases.

Identification of a new lipase family in the Brazilian Atlantic Forest soil metagenome

Lipases are the most investigated class of enzymes in metagenomics. Phylogenetic classification of bacterial lipases comprises eight families. Here we describe the construction and screening of three metagenomic libraries from Brazilian Atlantic Forest soil and identification of a new lipase family. The metagenomic libraries, MAF1, MAF2 and MAF3, contained 34 560, 29 280 and 36 288 clones respectively. Lipase screening on triolein-rhodamine B plates resulted in one positive clone, Lip018. The DNA insert of Lip018 was fully sequenced and 20 ORFs were identified by comparison against the GenBank. Transposon mutagenesis revealed that ORF15, similar to serine peptidases, and ORF16, a hypothetical protein, were both required for lipase activity. ORF16 has a typical lipase conserved pentapeptide G-X-S-X-G and the comparison against the Pfam database showed that ORF16 belongs to family 5 of αβ-hydrolase. Phylogenetic analyses indicated that ORF16, together with other related proteins, may be a member of a new lipase family, named LipAP, activated by a putative serine protease. Partial characterization of ORF16 lipase showed that the enzyme has activity against a broad range of p-nitrophenyl esters, but only after activation by the predicted peptidase ORF15.

Cloning and expression of gene, and activation of an organic solvent-stable lipase from Pseudomonas aeruginosa LST-03

Organic solvent-tolerant Pseudomonas aeruginosa LST-03 secretes an organic solvent-stable lipase, LST-03 lipase. The gene of the LST-03 lipase (Lip9) and the gene of the lipase-specific foldase (Lif9) were cloned and expressed in Escherichia coli. In the cloned 2.6 kbps DNA fragment, two open reading frames, Lip9 consisting of 933 nucleotides which encoded 311 amino acids and Lif9 consisting of 1,020 nucleotides which encoded 340 amino acids, were found. The overexpression of the lipase gene (lip9) was achieved when T7 promoter was used and the signal peptide of the lipase was deleted. The expressed amount of the lipase was greatly increased and overexpressed lipase formed inclusion body in E. coli cell. The collected inclusion body of the lipase from the cell was easily solubilized by urea and activated by using lipase-specific foldase of which 52 or 58 amino acids of N-terminal were deleted. Especially, the N-terminal methionine of the lipase of which the signal peptide was deleted was released in E. coli and the amino acid sequence was in agreement with that of the originally-produced lipase by P. aeruginosa LST-03. Furthermore, the overexpressed and solubilized lipase of which the signal peptide was deleted was more effectively activated by lipase-specific foldase.

Purification, characterization, and molecular cloning of organic-solvent-tolerant cholesterol esterase from cyclohexane-tolerant Burkholderia cepacia strain ST-200

Extracellular cholesterol esterase of Burkholderia cepacia strain ST-200 was purified from the culture supernatant. Its molecular mass was 37 kDa. The enzyme was stable at pH 5.5-12 and active at pH 5.5-6, showing optimal activity at pH 7.0 at 45 degrees C. Relative to the commercially available cholesterol esterases, the purified enzyme was highly stable in the presence of various water-miscible organic solvents. The enzyme preferentially hydrolyzed long-chain fatty acid esters of cholesterol, except for that of cholesteryl palmitate. The enzyme exhibited lipolytic activity toward various p-nitrophenyl esters. The hydrolysis rate of p-nitrophenyl caprylate was enhanced 3.5- to 7.2-fold in the presence of 5-20% (vol/vol) water-miscible organic solvents relative to that in the absence of organic solvents. The structural gene encoding the cholesterol esterase was cloned and sequenced. The primary translation product was predicted to be 365 amino acid residues. The mature product is composed of 325 amino acid residues. The amino acid sequence of the product showed the highest similarity to the lipase LipA (87%) from B. cepacia DSM3959.

A novel lipase from Pseudomonas fluorescens HU380: gene cloning, overproduction, renaturation-activation, two-step purification, and characterization

The extracellular lipase gene (lipA) from Pseudomonas fluorescens HU380 was cloned from a genomic library constructed in pBluescript SK+. Nucleotide sequence analysis revealed an open reading frame of 1854 by encoding the lipase. Its deduced amino acid sequence included internal amino acid sequences of the lipase from this strain: The lipase showed significant sequence similarity to lipases of Serratia marcescens strains and P. fluorescens strains. In Escherichia coli, lipA was expressed in the form of inclusion bodies, which were subsequently solubilized by urea followed by dialysis. The refolded protein was soluble and biologically active. The lipase purified from the E. coli transformant by this denaturation-renaturation procedure followed by only two steps of column chromatographs exhibited the same electrophoretic mobility as did the enzyme purified from P. fluorescens HU380, and both enzymes were quite similar in physicochemical properties such as specific activity, suggesting that the recombinant lipase protein has an intrinsic folding capability in vitro. The function of its C-terminal region is also discussed.

Active lactonizing lipase (LipL) efficiently overproduced by Pseudomonas strains as heterologous expression hosts

Pseudomonas sp. strain 109 secretes lactonizing lipase (LipL), which catalyzes efficient intramolecular transesterification of omega-hydroxyfatty acid esters to form macrocyclic lactones. Because Escherichia coli was found to be unsuitable as an expression host due to the predominant formation of inactive LipL-inclusion bodies and a lack of proper secretion machinery which is also required for the formation of active LipL, Pseudomonas strains were surveyed as expression hosts. Pseudomonas sp. strain 109, an original LipL producer, showed a 7.1-fold higher level of active LipL when the lipL gene under the control of tac-lacUV5 tandem promoter was introduced together with a limL gene encoding a LipL-specific chaperon. Pseudomonas aeruginosa ADD 1976 containing a T7 RNA polymerase gene in the chromosome and plasmid-borne lipL-limL genes under the control of T7 promoter showed a 13-fold higher level of active LipL. Several combinations in the number of lipL and/or limL genes on the plasmid were investigated, and (lipL)3-limL was found to be most efficient, yielding a 67-fold greater production of active LipL than that obtained by the wild-type Pseudomonas sp. strain 109.

Genes involved in SkfA killing factor production protect a Bacillus subtilis lipase against proteolysis

Small lipases of Bacillus species, such as LipA from Bacillus subtilis, have a high potential for industrial applications. Recent studies showed that deletion of six AT-rich islands from the B. subtilis genome results in reduced amounts of extracellular LipA. Here we demonstrate that the reduced LipA levels are due to the absence of four genes, skfABCD, located in the prophage 1 region. Intact skfABCD genes are required not only for LipA production at wild-type levels by B. subtilis 168 but also under conditions of LipA overproduction. Notably, SkfA has bactericidal activity and, probably, requires the SkfB to SkfD proteins for its production. The present results show that LipA is more prone to proteolytic degradation in the absence of SkfA and that high-level LipA production can be improved significantly by employing multiple protease-deficient B. subtilis strains. In conclusion, our findings imply that SkfA protects LipA, directly or indirectly, against proteolytic degradation. Conceivably, SkfA could act as a modulator in LipA folding or as a protease inhibitor.

Directed evolution of Pseudomonas aeruginosa lipase for improved amide-hydrolyzing activity

A lipase from Pseudomonas aeruginosa was subjected to directed molecular evolution for increased amide-hydrolyzing (amidase) activity. A single round of random mutagenesis followed by screening for hydrolytic activity for oleoyl 2-naphthylamide as compared with that for oleoyl 2-naphthyl ester identified five mutants with 1.7-2.0-fold increased relative amidase activities. Three mutational sites (F207S, A213D and F265L) were found to affect the amidase/esterase activity ratios. The combination of these mutations further improved the amidase activity. Active-site titration using a fluorescent phosphonic acid ester allowed the molecular activities for the amide and the ester to be determined for each mutant without purification of the lipase. A double mutant F207S/A213D gave the highest molecular activity of 1.1 min(-1) for the amide, corresponding to a 2-fold increase compared with that of the wild-type lipase. A structural model of the lipase indicated that the mutations occurred at the sites near the surface and remote from the catalytic triad, but close to the calcium binding site. This study is a first step towards understanding why lipases do not hydrolyze amides despite the similarities to serine proteases in the active site structure and the reaction mechanism and towards the preparation of a general acyl transfer catalyst for the biotransformation of amides.

High-level heterologous expression and properties of a novel lipase from Ralstonia sp. M1

The mature lipase LipA and its 56aa-truncated chaperone DeltaLipBhis (with 6xhis-tag) from Ralstonia sp. M1 were over-expressed in Escherichia coli BL21 under the control of T7 promoter with a high level of 70 and 12mg protein per gram of wet cells, respectively. The simply purified lipase LipA was effectively refolded by Ni-NTA purified chaperone DeltaLipBhis in molar ratio 1:1 at 4 degrees C for 24 hours in H2O. The in vitro refolded lipase LipA had an optimal activity in the temperature range of 50-55 degrees C and was stable up to 45 degrees C with more than 84% activity retention. The maximal activity was observed at pH 10.75 for hydrolysis of olive oil and found to be stable over alkaline pH range 8.0-10.5 with more than 52% activity retention. The enzyme was found to be highly resistant to many organic solvents especially induced by ethanolamine (remaining activity 137-334%), but inhibited by 1-butanol and acetonitrile (40-86%). Metal ions Cu2+, Sn2+, Mn2+, Mg2+, and Ca2+ stimulated the lipase slightly with increase in activity by up to 22%, whereas Zn2+ significantly inhibited the enzyme with the residual activity of 30-65% and Fe3+ to a lesser degree (activity retention of 77-86%). Tween 80, Tween 60, and Tween 40 induced the activation of the lipase LipA (222-330%) and 0.2-1% (w/v) of Triton X-100, X-45, and SDS increased the lipase activity by up to 52%. However, 5% (w/v) of Triton X-100, X-45, and SDS inhibited strongly the activity by 31-89%. The inhibitors including DEPC, EDTA, PMSF, and 2-mercaptoethanol (0.1-10mM) inhibited moderately the lipase with remaining activity of 57-105%. The lipase LipA hydrolyzed a wide range of triglycerides, but preferentially short length acyl chains (C4 and C6). In contrast to the triglycerides, medium length acyl chains (C8 and C14) of p-nitrophenyl (p-NP) esters were preferential substrates of this lipase. The enzyme preferentially catalyzed the hydrolysis of cottonseed oil (317%), cornoil (227%), palm oil (222%), and wheatgerm oil (210%) in comparison to olive oil (100%).

A novel lipase/chaperone pair from Ralstonia sp. M1: analysis of the folding interaction and evidence for gene loss in R. solanacearum

A microbial strain (referred to as M1) that produces an extracellular lipase was isolated from a soil sample in Vietnam, and identified as a Ralstonia species by partial sequencing of its 16S rDNA. A genomic library was constructed from Pst I fragments, and a colony showing lipase activity was selected for further analysis. Sequencing of the 4.7-kb insert in this clone (named M1-72) revealed one incomplete and three complete ORFs, predicted to encode a partial hypothetical glutaminyl tRNA synthetase (304 aa), a hypothetical transmembrane protein (500 aa), a lipase (328 aa) and a lipase chaperone (352 aa), respectively. Alignment of the insert sequence with the corresponding region of the genome of R. solanacearum GMI1000 (GenBank Accession No. AL646081) confirmed the presence in the latter of the genes for the hypothetical transmembrane protein and glutaminyl tRNA synthetase, which exhibited 89-91% identity to their counterparts in M1. However, R. solanacearum GMI1000 lacks the complete lipase-encoding gene and the major part of the chaperone-encoding gene, creating a so-called "black hole". The deduced amino acid sequences of the products of the lipase gene lipA and chaperone gene lipB from strain M1 shared 49.3-60.3% and 23.9-32.7% identity, respectively, with those of the Burkholderia lipase/chaperone subfamily I.2. lipB is located downstream of lipA, and separated from it by only 9 bp, and each gene has a putative ribosome binding site. The mature lipase LipA, a His-tagged derivative (LipAhis), the tagged full-length chaperone LipBhis and a truncated form (DeltaLipBhis) lacking the 56 N-terminal residues were expressed in Escherichia coli BL21. LipA, LipAhis and DeltaLipBhis could be expressed at high levels (70, 15 and 12 mg/g wet cells, respectively) and were easily purified. However, LipBhis was expressed at a much lower level which precluded purification. The specific activity of purified LipAhis, expressed on its own, was very low (<52 U/mg). However, after co-incubation with the purified DeltaLipBhis in vitro, the specific activity of the enzyme was markedly enhanced, indicating that the chaperone facilitated correct folding of the enzyme. A lipase:chaperone ratio of 1:10 was found to be optimal, yielding an enzyme preparation with a specific activity of 650 U/mg.

Cloning, expression, and characterization of a lipolytic enzyme gene (lip8) from Pseudomonas aeruginosa LST-03

A lipolytic enzyme gene (lip8) was cloned from organic solvent-tolerant Pseudomonas aeruginosa LST-03 and sequenced. In the sequenced nucleotides, an open reading frame consisting of 1,173 nucleotides and encoding 391 amino acids was found. Lip8 is considered to belong to the family VIII of lipolytic enzymes whose serine in the consensus sequence of -Ser-Xaa-Xaa-Lys- acts as catalytic nucleophile. The gene was expressed in Escherichia coli and purified by a combination of ammonium sulfate fractionation and hydrophobic interaction and ion-exchange chromatographies to homogeneity on SDS-PAGE analysis. The optimum temperature and heat stability of Lip8 were not as high as those of Lip3 and LST-03 lipase, two other lipolytic enzymes from the same strain. Addition of glycerol to a solution containing Lip8 stabilized this enzyme. By measuring the activities against various triacylglycerols and fatty acid methyl esters having carbon chains of different lengths, Lip8 was categorized as an esterase which has higher activities against fatty acid methyl esters with short-chain fatty acids.

Lipase-Specific Foldases

Lipases represent the most important class of enzymes used in biotechnology. Many bacteria produce and secrete lipases but the enzymes originating from Pseudomonas and Burkholderia species seem to be particularly useful for a wide variety of different biocatalytic applications. These enzymes are usually encoded in an operon together with a second gene which codes for a lipase-specific foldase, Lif, which is necessary to obtain enzymatically active lipase. A detailed analysis based on amino acid homology has suggested the classification of Lif proteins into four different families and also revealed the presence of a conserved motif, Rx1x2FDY(F/C)L(S/T)A. Recent experimental evidence suggests that Lifs are so-called steric chaperones, which exert their physiological function by lowering energetic barriers during the folding of their cognate lipases, thereby providing essential steric information needed to fold lipases into their enzymatically active conformation.

Cloning, expression and characterization of a lipase gene (lip3) from Pseudomonas aeruginosa LST-03

A lipase gene (lip3) was cloned from the Pseudomonas aeruginosa strain LST-03 (which tolerates organic solvents) and expressed in Escherichia coli. The cloned sequence includes an ORF consisting of 945 nucleotides, encoding a protein of 315 amino acids (Lip3 lipase, 34.8 kDa). The predicted Lip3 lipase belongs to the class of serine hydrolases; the catalytic triad consists of the residues Ser-137, Asp-258, and His-286. The gene cloned in the present study does not encode the LST-03 lipase, a previously isolated solvent-stable lipase secreted by P. aeruginosa LST-03, because the N-terminal amino acid sequence of the Lip3 lipase differs from that of the LST-03 lipase. Although the effects of pH on the activity and stability of the Lip3 lipase, and the temperature optimum of the enzyme, were similar to those of the LST-03 lipase, the relative activity of the Lip3 lipase at lower temperatures (0-35 degrees C) was higher than that of the LST-03 lipase. In the absence of organic solvents, the half-life of the Lip3 lipase was similar to that of the LST-03 lipase. However, in the presence of most of the organic solvents tested in this study (the exceptions were ethylene glycol and glycerol), the stability of the Lip3 lipase was lower than that of the LST-03 lipase.

Expression and characterization of a novel enantioselective lipase from Acinetobacter species SY-01

A novel lipase gene, lipase A, of Acinetobacter species SY-01 (A. species SY-01) was cloned, sequenced, and expressed in Bacillus subtilis 168. The deduced amino acid (aa) sequences for the lipase A and its chaperone, lipase-specific chaperone, were found to encode mature proteins of 339 aa (37.2 kDa) and 347 aa (38.1 kDa), respectively. The aa sequence of lipase A and lipase-specific chaperone shared high homology 82 and 67% identity with the lipase A and the lipase B of A. species RAG-1. This new lipase was defined as a group I Proteobacterial lipase family. The expressed lipase A was purified through sequential treatment with Q-Sepharose, Resource Q, and Superdex-S75 columns. The maximal activity was observed at 50 degrees C for hydrolysis of p-nitrophenyl monoesters and found to be stable at pH 9-11, with optimal activity at pH 10. Lipase A hydrolyzed wide range of fatty acid esters of p-nitrophenyl, but preferentially hydrolyzed short length acyl chains (C2 and C4). Moreover, lipase A from A. species SY-01 catalyzed hydrolysis of the two acetate isomers of cis-(+/-)-2-(bromomethyl)-2-(2,4-dichloro phenyl)-1,3-dioxolane-4-methyl acetate, an intermediate required for the synthesis of Itraconazole which was an anti-fungal drug, at different rate and yielded cis-(-)-isomer in 81.5% conversion with 91.9% enantiomeric excess.

Highly sensitive active-site titration of lipase in microscale culture media using fluorescent organophosphorus ester

The fluorescent organophosphorus esters, diethyl 4-methylumbelliferyl phosphate (1), ethyl hexyl 4-methylumbelliferyl phosphate (2) and ethyl 4-methylumbelliferyl heptylphosphonate (3) have been synthesized and evaluated as a sensitive active-site titrant of lipase. The phosphorus esters 1, 2 and 3 inactivated the lipase from Pseudomonas aeruginosa (LPL-312) with a second-order rate constant for enzyme inactivation (k(on)) of 1.8, 32 and 5600 s(-1) M(-1), respectively. The long-chain phosphonate 3 turned out to be the most potent inactivator of the lipase to release a stoichiometric amount of highly fluorescent 4-methylumbelliferone (4MU) as a leaving group. By using the phosphate 3 as an active-site titrant, the low concentration (4.5 nM) of the active lipase was titrated successfully. The highly sensitive active-site titration with 3 enabled the direct determination of the concentration of the active lipase expressed in a microscale culture medium. Although the expression level differed significantly from one culture to another, the titrated concentration of the active lipase was proportional to the apparent activity for all the independent cultures. The molecular activity calculated for the expressed lipase was found to be the same as that of the purified lipase. The present active-site titration method is widely applicable to the biocatalytic engineering of lipases such as directed evolution, site-directed mutagenesis, chemical modification and immobilization.

Lipase and its modulator from Pseudomonas sp. strain KFCC 10818: proline-to-glutamine substitution at position 112 induces formation of enzymatically active lipase in the absence of the modulator

A lipase gene, lipK, and a lipase modulator gene, limK, of Pseudomonas sp. strain KFCC 10818 have been cloned, sequenced, and expressed in Escherichia coli. The limK gene is located immediately downstream of the lipK gene. Enzymatically active lipase was produced only in the presence of the limK gene. The effect of the lipase modulator LimK on the expression of active lipase was similar to those of the Pseudomonas subfamily I.1 and I.2 lipase-specific foldases (Lifs). The deduced amino acid sequence of LimK shares low homology (17 to 19%) with the known Pseudomonas Lifs, suggesting that Pseudomonas sp. strain KFCC 10818 is only distantly related to the subfamily I.1 and I.2 Pseudomonas species. Surprisingly, a lipase variant that does not require LimK for its correct folding was isolated in the study to investigate the functional interaction between LipK and LimK. When expressed in the absence of LimK, the P112Q variant of LipK formed an active enzyme and displayed 63% of the activity of wild-type LipK expressed in the presence of LimK. These results suggest that the Pro(112) residue of LipK is involved in a key step of lipase folding. We expect that the novel finding of this study may contribute to future research on efficient expression or refolding of industrially important lipases and on the mechanism of lipase folding.

Low-temperature lipase from psychrotrophic Pseudomonas sp. strain KB700A

We have previously reported that a psychrotrophic bacterium, Pseudomonas sp. strain KB700A, which displays sigmoidal growth even at -5 degrees C, produced a lipase. A genomic DNA library of strain KB700A was introduced into Escherichia coli TG1, and screening on tributyrin-containing agar plates led to the isolation of the lipase gene. Sequence analysis revealed an open reading frame (KB-lip) consisting of 1,422 nucleotides that encoded a protein (KB-Lip) of 474 amino acids with a molecular mass of 49,924 Da. KB-Lip showed 90% identity with the lipase from Pseudomonas fluorescens and was found to be a member of Subfamily I.3 lipase. Gene expression and purification of the recombinant protein were performed. KB-Lip displayed high lipase activity in the presence of Ca2+. Addition of EDTA completely abolished lipase activity, indicating that KB-Lip was a Ca2+-dependent lipase. Addition of Mn2+ and Sr2+ also led to enhancement of lipase activity but to a much lower extent than that produced by Ca2+. The optimal pH of KB-Lip was 8 to 8.5. The addition of detergents enhanced the enzyme activity. When p-nitrophenyl esters and triglyceride substrates of various chain-lengths were examined, the lipase displayed highest activity towards C10 acyl groups. We also determined the positional specificity and found that the activity was 20-fold higher toward the 1(3) position than toward the 2 position. The optimal temperature for KB-Lip was 35 degrees C, lower than that for any previously reported Subfamily I.3 lipase. The enzyme was also thermolabile compared to these lipases. Furthermore, KB-Lip displayed higher levels of activity at low temperatures than did other enzymes from Subfamily I.3, indicating that KB-Lip has evolved to function in cold environments, in accordance with the temperature range for growth of its psychrotrophic host, strain KB700A.

Disulfide bond in Pseudomonas aeruginosa lipase stabilizes the structure but is not required for interaction with its foldase

Pseudomonas aeruginosa secretes a 29-kDa lipase which is dependent for folding on the presence of the lipase-specific foldase Lif. The lipase contains two cysteine residues which form an intramolecular disulfide bond. Variant lipases with either one or both cysteines replaced by serines showed severely reduced levels of extracellular lipase activity, indicating the importance of the disulfide bond for secretion of lipase through the outer membrane. Wild-type and variant lipase genes fused to the signal sequence of pectate lyase from Erwinia carotovora were expressed in Escherichia coli, denatured by treatment with urea, and subsequently refolded in vitro. Enzymatically active lipase was obtained irrespective of the presence or absence of the disulfide bond, suggesting that the disulfide bond is required neither for correct folding nor for the interaction with the lipase-specific foldase. However, cysteine-to-serine variants were more readily denatured by treatment at elevated temperatures and more susceptible to proteolytic degradation by cell lysates of P. aeruginosa. These results indicate a stabilizing function of the disulfide bond for the active conformation of lipase. This conclusion was supported by the finding that the disulfide bond function could partly be substituted by a salt bridge constructed by changing the two cysteine residues to arginine and aspartate, respectively.

Cloning and sequencing of a gene of organic solvent-stable protease secreted from Pseudomonas aeruginosa PST-01 and its expression in Escherichia coli

A gene of organic solvent-stable protease (PST-01 protease) secreted by Pseudomonas aeruginosa PST-01 was cloned and its nucleotide was sequenced. The nucleotide sequence analysis revealed that the PST-01 protease was a pseudolysin, which was an elastase produced by P. aeruginosa and was well characterized by the previous investigators. The PST-01 protease produced in recombinant Escherichia coli was not secreted into the extracellular medium, but its proenzyme was released by the lysis of the cells and became a 33.1kDa mature enzyme autoproteolytically. Its characteristics including organic solvent stability were as same as those of the PST-01 protease secreted by P. aeruginosa PST-01.

In vitro analysis of roles of a disulfide bridge and a calcium binding site in activation of Pseudomonas sp. strain KWI-56 lipase

The expression of lipase from Pseudomonas sp. strain KWI-56 (recently reclassified as Burkholderia cepacia) had been found to be dependent on an activator gene (act) downstream of its structural gene (lip). In this work, the mature lipase was synthesized in an enzymatically active form with a cell-free Escherichia coli S30 coupled transcription-translation system by expressing a recombinant lipase gene (rlip) encoding the mature lipase in the presence of its purified activator or by coexpression of rlip and act. The in vitro expression systems were used for studying the folding process of the lipase. The addition of dithiothreitol in the expression systems decreased the activity dramatically without affecting the synthesis level of the lipase, whereas the in vitro-synthesized active lipase was relatively stable even in the presence of dithiothreitol. This phenomenon was further investigated by constructing mutant lipase genes only in vitro by PCR without gene cloning. Replacements of cysteine residues (Cys190 and Cys270) forming a sole putative disulfide bond to serine residues decreased the lipase activity greatly, suggesting that the disulfide bond was essential for the proper folding of the lipase. In addition, replacing Asp242 and Asp288, which were deduced to be part of a Ca(2+) binding site, also greatly decreased the activities of the in vitro-synthesized lipases. The role of the Ca(2+) binding site in the activation of the lipase is also discussed.

Bacterial biocatalysts: molecular biology, three-dimensional structures, and biotechnological applications of lipases

Bacteria produce and secrete lipases, which can catalyze both the hydrolysis and the synthesis of long-chain acylglycerols. These reactions usually proceed with high regioselectivity and enantioselectivity, and, therefore, lipases have become very important stereoselective biocatalysts used in organic chemistry. High-level production of these biocatalysts requires the understanding of the mechanisms underlying gene expression, folding, and secretion. Transcription of lipase genes may be regulated by quorum sensing and two-component systems; secretion can proceed either via the Sec-dependent general secretory pathway or via ABC transporters. In addition, some lipases need folding catalysts such as the lipase-specific foldases and disulfide-bond-forming proteins to achieve a secretion-competent conformation. Three-dimensional structures of bacterial lipases were solved to understand the catalytic mechanism of lipase reactions. Structural characteristics include an alpha/beta hydrolase fold, a catalytic triad consisting of a nucleophilic serine located in a highly conserved Gly-X-Ser-X-Gly pentapeptide, and an aspartate or glutamate residue that is hydrogen bonded to a histidine. Four substrate binding pockets were identified for triglycerides: an oxyanion hole and three pockets accommodating the fatty acids bound at position sn-1, sn-2, and sn-3. The differences in size and the hydrophilicity/hydrophobicity of these pockets determine the enantiopreference of a lipase. The understanding of structure-function relationships will enable researchers to tailor new lipases for biotechnological applications. At the same time, directed evolution in combination with appropriate screening systems will be used extensively as a novel approach to develop lipases with high stability and enantioselectivity.

A low-Mr lipase activation factor cooperating with lipase modulator protein LimL in Pseudomonas sp. strain 109

Pseudomonas sp. strain 109 produces a unique lipase (LipL) which efficiently catalyses intramolecular transesterification of omega-hydroxyesters to form macrocyclic lactones. In vivo production of enzymically active LipL requires lipase modulator protein (LimL), which functions as a molecular chaperone for the correct folding of LipL. However, previous work has shown that LipL forms a tight complex with LimL in vitro and the resulting LipL-LimL complex is only partially active, suggesting an additional mechanism that facilitates the dissociation of the complex to form enzymically active LipL. In the present work, a low-Mr compound (lipase activation factor, LAF) was found in Pseudomonas sp. strain 109 that when added to the LipL-LimL complex resulted in the activation of LipL. Ca2+ ions also enhanced lipase activity, but the instantaneous activation by Ca2+ was different from the gradual and time-dependent activation by LAF, indicating the novel nature of this compound. LAF passed through an ultrafiltration membrane with an Mr cut-off of 3000 and showed an apparent Mr of 330+/-30 on Superdex Peptide gel-filtration chromatography. Treatment of the LipL-LimL complex with LAF liberated free active LipL, indicating that LAF was necessary to dissociate the LipL-LimL complex.

LipC, a second lipase of Pseudomonas aeruginosa, is LipB and Xcp dependent and is transcriptionally regulated by pilus biogenesis components

We have isolated cosmids that complement a Pseudomonas aeruginosa export-impaired mutant by increasing growth on lipid agar, a medium that requires lipase expression and export. These cosmids encode a previously unidentified lipase, LipC, which has high homology to the P. aeruginosa lipA gene product. Like LipA, LipC activity requires the chaperone activity of the lipB gene product and a functional xcp gene cluster for export. However, expression of LipC is barely detectable in a wild-type background. Transposon insertions that increase lipC promoter activity have been obtained that inactivate two pilus biogenesis genes, pilX and pilY1. This suggests that these proteins either directly or indirectly repress the expression of LipC and may be involved in transducing an extracellular signal that regulates this lipase.

Cloning and sequence analysis of the lipase and lipase chaperone-encoding genes from Acinetobacter calcoaceticus RAG-1, and redefinition of a proteobacterial lipase family and an analogous lipase chaperone family

The genes encoding the lipase (LipA) and lipase chaperone (LipB) from Acinetobacter calcoaceticus RAG-1 were cloned and sequenced. The genes were isolated from a genomic DNA library by complementation of a lipase-deficient transposon mutant of the same strain. Transposon insertion in this mutant and three others was mapped to a single site in the chaperone gene. The deduced amino acid (aa) sequences for the lipase and its chaperone were found to encode mature proteins of 313 aa (32.5kDa) and 347 aa (38.6kDa), respectively. The lipase contained a putative leader sequence, as well as the conserved Ser, His, and Asp residues which are known to function as the catalytic triad in other lipases. A possible trans-membrane hydrophobic helix was identified in the N-terminal region of the chaperone. Phylogenetic comparisons showed that LipA, together with the lipases of A. calcoaceticus BD413, Vibrio cholerae El Tor, and Proteus vulgaris K80, were members of a previously described family of Pseudomonas and Burkholderia lipases. This new family, which we redefine as the Group I Proteobacterial lipases, was subdivided into four subfamilies on the basis of overall sequence homology and conservation of residues which are unique to the subfamilies. LipB, moreover, was found to be a member of an analogous family of lipase chaperones. We propose that the lipases produced by P. fluorescens and Serratia marcescens, which comprise a second sequence family, be referred to as the Group II Proteobacterial lipases. Evidence is provided to support the hypothesis that both the Group I and Group II families have evolved from a combination of common descent and lateral gene transfer.

Identification of the tliDEF ABC transporter specific for lipase in Pseudomonas fluorescens SIK W1

Pseudomonas fluorescens, a gram-negative psychrotrophic bacterium, secretes a thermostable lipase into the extracellular medium. In our previous study, the lipase of P. fluorescens SIK W1 was cloned and expressed in Escherichia coli, but it accumulated as inactive inclusion bodies. Amino acid sequence analysis of the lipase revealed a potential C-terminal targeting sequence recognized by the ATP-binding cassette (ABC) transporter. The genetic loci around the lipase gene were searched, and a secretory gene was identified. Nucleotide sequencing of an 8.5-kb DNA fragment revealed three components of the ABC transporter, tliD, tliE, and tliF, upstream of the lipase gene, tliA. In addition, genes encoding a protease and a protease inhibitor were located upstream of tliDEF. tliDEF showed high similarity to ABC transporters of Pseudomonas aeruginosa alkaline protease, Erwinia chrysanthemi protease, Serratia marcescens lipase, and Pseudomonas fluorescens CY091 protease. tliDEF and the lipase structural gene in a single operon were sufficient for E. coli cells to secrete the lipase. In addition, E. coli harboring the lipase gene secreted the lipase by complementation of tliDEF in a different plasmid. The ABC transporter of P. fluorescens was optimally functional at 20 and 25 degrees C, while the ABC transporter, aprD, aprE, and aprF, of P. aeruginosa secreted the lipase irrespective of temperature between 20 and 37 degrees C. These results demonstrated that the lipase is secreted by the P. fluorescens SIK W1 ABC transporter, which is organized as an operon with tliA, and that its secretory function is temperature dependent.

High-level formation of active Pseudomonas cepacia lipase after heterologous expression of the encoding gene and its modified chaperone in Escherichia coli and rapid in vitro refolding

The lipase from Pseudomonas cepacia ATCC 21808 (recently reclassified as Burkholderia cepacia) is widely used by organic chemists for enantioselective synthesis and is manufactured from recombinant P. cepacia harboring on a plasmid the clustered genes for lipase and its chaperone. High levels of expression of inactive lipase (40%) in Escherichia coli were achieved with pCYTEXP1 under the control of the strong, temperature-inducible lambdaPRL promoter. However, no overexpression of the lipase chaperone was achieved in E. coli. Thus, chemical refolding of inactive lipase in the absence of its chaperone yielded only 25 U/mg, compared to 3,470 U of the purified lipase secreted by recombinant P. cepacia per mg. Sequence analysis of the chaperone revealed a high GC content (>90%) in the 5' region of the gene and the presence of a putative membrane anchor at the N terminus. Hence, the 5' region of the gene was replaced by a synthetic fragment, and the putative membrane anchor was removed by deletion of the first 34 or 70 N-terminal amino acids. Only truncation of the gene led to overexpression of the chaperone (up to 60%) in E. coli. With this chaperone, it was possible to obtain for the first time in a simple refolding procedure a highly active Pseudomonas lipase (classes I and II) expressed in E. coli with a specific activity of up to 4,850 U/mg and a yield of 314,000 U/g of E. coli wet cells.

Modulator-mediated synthesis of active lipase of Pseudomonas sp. 109 by Escherichia coli cell-free coupled transcription/translation system

Catalytically active lipase was synthesized using Escherichia coli S30 extract from the signal-deleted lipL gene (lipL) in the presence of its N-terminal hydrophobic fragment-truncated modulator (rLimL) that was purified from the overexpressing E. coli cells. The specific activity of the lipase thus synthesized was 125 times higher than that of the purified one from Pseudomonas sp. 109. No lipase activity was detected in the absence of rLimL, even though the lipase protein itself was synthesized. Active lipase was also produced in vitro by coexpression of rlipL and the modulator gene (rlimL), although a much smaller amount of the lipase was formed. In the absence of rLimL, aggregates of the lipase were formed during its folding process. The addition of rLimL proportionally raised both lipase solubility and enzyme activity. An unstable but high activity peak of the lipase was found during its folding process.

Characterization of the Vibrio cholerae El Tor lipase operon lipAB and a protease gene downstream of the hly region

We have cloned and sequenced a region encoding a lipase operon and a putative, previously uncharacterized metalloprotease of Vibrio cholerae O1. These lie downstream of hlyA and hlyB, which encode the El Tor hemolysin and methyl-accepting chemotactic factor, respectively. Previous reports identified the hlyC gene downstream of hlyAB, encoding an 18.3-kDa protein. However, we now show that this open reading frame (ORF) encodes a 33-kDa protein, and since the amino acid sequence is highly homologous to the triacylglyceride-specific lipase of Pseudomonas spp., hlyC has been renamed lipA. LipA contains the highly conserved pentapeptide and catalytic triad amino acid regions of the catalytic sites of other lipases. The region downstream of lipA has been sequenced and has revealed ORFs lipB and prtV. The amino acid sequence of lipB is homologous to those of the accessory lipase proteins (lipase-specific foldase) required by Pseudomonas and various other bacterial species for the production of mature active lipase, and in agreement with this, we show that both lipA and lipB are required to restore a lipase-deficient lipA null mutant of V. cholerae. The intergenic stop codon for lipA overlaps the ribosome-binding site for lipB, and a stem-loop resembling a rho-independent terminator is present immediately downstream from lipB, suggesting that lipA and lipB form a lipase operon in V. cholerae. prtV lies downstream of lipAB but is transcribed in the opposite direction and is predicted to share the same putative transcriptional terminator with lipAB. The zinc-binding and catalytic domains conserved among many metalloproteases are present in PrtV, which is highly homologous to the immune inhibitor A (InA) metalloprotease of Bacillus thuringiensis. PrtV was visualized as approximately 102 kDa, which is consistent with the coding capacity of the gene. The genetic organization of this region suggests that it is possibly part of a pathogenicity island, encoding products capable of damaging host cells and/or involved in nutrient acquisition by V. cholerae. However, neither lipA nor prtV null mutants were attenuated in the infant mouse model, nor did they exhibit reduced colonization potential compared with wild type in competition experiments.

The disulfide bond in the Aeromonas hydrophila lipase/acyltransferase stabilizes the structure but is not required for secretion or activity

Vibrio and Aeromonas spp. secrete an unusual 35-kDa lipase that shares several properties with mammalian lecithin-cholesterol acyltransferase. The Aeromonas hydrophila lipase contains two cysteine residues that form an intramolecular disulfide bridge. Here we show that changing either of the cysteines to serine does not reduce enzymatic activity, indicating that the disulfide bond is not required for correct folding. However, when either of the cysteines is replaced, the enzyme is more readily denatured by urea and more sensitive to degradation by trypsin than is the wild-type enzyme, evidence that the bridge has an important role in stabilizing the protein's structure. The two mutant proteins with serine-for-cysteine replacements were secreted by Aeromonas salmonicida containing the cloned genes, although the levels of both in the culture supernatants were lower than the level of the wild-type enzyme. When the general secretory pathway was blocked with carbonyl cyanide chlorophenylhydrazone, the cell-associated pools of the mutant enzymes appeared to be degraded, whereas the wild-type pool remained stable. We conclude that reduced extracellular levels of the mutant proteins are the result of their increased sensitivities to proteases encountered inside the cell during export.

Biochemical properties of cloned lipases from the Pseudomonas family

Three Pseudomonas lipases, representing three subfamilies, were analysed for pH optima, destabilization by EGTA and surfactants, phospholipase and cholesterolesterase side activities. All the Pseudomonas lipases tested showed alkaline pH optima. The Pseudomonas cepacia and the P. pseudoalcaligenes lipases were totally inhibited by EGTA at pH 9, and the latter was also fully inhibited at pH 7. The lipase from P. mendocina was not inhibited by EGTA at any of the pH values tested. These findings indicate that a calcium binding site exists in some of the Pseudomonas lipases. The P. pseudoalcaligenes, P. cepacia and P. mendocina lipases were inhibited by the anionic surfactant SDS at concentrations between 0.01-0.5 mg/ml. The P. pseudoalcaligenes and P. cepacia lipases were not inhibited by the nonionic surfactant Brij35 in concentration up to 1 mg/ml, whereas the lipase from P. mendocina was inhibited at 0.1 mg/ml. The P. pseudoalcaligenes and P. cepacia lipases were found to possess high cholesterol esterase activity. P. pseudoalcaligenes lipase was further found to have high phospholipase activity. Ten Pseudomonas lipase sequences were compared by automatic sequence alignment. On the basis of sequence identity we have classified Pseudomonas lipases into five subfamilies.

Characterization of lipase-deficient mutants of Acinetobacter calcoaceticus BD413: identification of a periplasmic lipase chaperone essential for the production of extracellular lipase

Acinetobacter calcoaceticus BD413 produces an extracellular lipase, which is encoded by the lipA gene. Five lipase-deficient mutants have been generated via random insertion mutagenesis. Phenotypic characterization of these mutants revealed the presence of as many as four lipolytic enzymes in A. calcoaceticus. Biochemical evidence classified four of the mutants as export mutants, which presumably are defective in translocation of the lipase across the outer membrane. The additional mutant, designated AAC302, displays a LipA- phenotype, and yet the mutation in this strain was localized 0.84 kbp upstream of lipA. Sequence analysis of this region revealed an open reading frame, designated lipB, that is disrupted in AAC302. The protein encoded by this open reading frame shows extensive similarity to a chaperone-like helper protein of several pseudomonads, required for the production of extracellular lipase. Via complementation of AAC302 with a functional extrachromosomal copy of lipA, it could be determined that LipB is essential for lipase production. As shown by the use of a translational LipB-PhoA fusion construct, the C-terminal part of LipB of A. calcoaceticus BD413 is located outside the cytoplasm. Sequence analysis further strongly suggests that A. calcoaceticus LipB is N terminally anchored in the cytoplasmic membrane. Therefore, analogous to the situation in Pseudomonas species, however, lipB in A. calcoaceticus is located upstream of the structural lipase gene. lipB and lipA form a bicistronic operon, and the two genes are cotranscribed from an Escherichia coli sigma 70-type promoter. The reversed order of genes, in comparison with the situation in Pseudomonas species, suggests that LipA and LipB are produced in equimolar amounts. Therefore, the helper protein presumably does not only have a catalytic function, e.g., in folding of the lipase, but is also likely to act as a lipase-specific chaperone. A detailed model of the export route of the lipase of A. calcoaceticus BD413 is proposed.

Lipase modulator protein (LimL) of Pseudomonas sp. strain 109

Plasmids containing a Pseudomonas sp. strain 109 extracellular lipase gene (lipL) lacking NH2-terminal sequence and a lipase modulator gene (limL) lacking the NH2-terminal hydrophobic region were constructed and expressed independently in Escherichia coli by using the T7 promoter expression vector system. Recombinant LipL (rLipL) was produced as inclusion bodies, whereas recombinant LimL (rLimL) was present as a soluble protein. During in vitro renaturation of the purified rLipL inclusion bodies after they had been dissolved in 8 M urea, addition of rLimL was essential to solubilize and modulate rLipL. The solubility and activity of rLipL were influenced by the rLimL/rLipL molar ratio; the highest level of solubility was obtained at an rLimL/rLipL ratio of 4:5, whereas the highest activity level was obtained at an rLimL/rLipL ratio of 4:1. After renaturation, rLipL and rLimL were coprecipitated with anti-rLipL antibody, indicating the formation of an rLipL-rLimL complex. Activity of the native lipase purified from Pseudomonas sp. strain 109 was also inhibited by rLimL. By Western blotting (immunoblotting) with anti-rLimL antibody, native LimL was detected in Pseudomonas cells solubilized by sarcosyl treatment. LimL was purified from Pseudomonas sp. strain 109, and the NH2-terminal amino acid sequence was determined to be NH2-Leu-Glu-Pro-Ser-Pro-Ala-Pro-. We propose that to prevent membrane degradation, LimL weakens lipase activity inside the cell, especially in the periplasm, in addition to modulating lipase folding.

Characterization of the extracellular lipase, LipA, of Acinetobacter calcoaceticus BD413 and sequence analysis of the cloned structural gene

The extracellular lipase from Acinetobacter calcoaceticus BD413 was purified to homogeneity, via hydrophobic-interaction fast performance liquid chromatography (FPLC), from cultures grown in mineral medium with hexadecane as the sole carbon source. The enzyme has an apparent molecular mass of 32 kDa on SDS-polyacrylamide gels and hydrolyses long acyl chain p-nitrophenol (pNP) esters, like pNP palmitate (pNPP), with optimal activity between pH 7.8 and 8.8. Additionally, the enzyme shows activity towards triglycerides such as olive oil and tributyrin and towards egg-yolk emulsions. The N-terminal amino acid sequence of the mature protein was determined, and via reverse genetics the structural lipase gene was cloned from a gene library of A. calcoaceticus DNA in Escherichia coli phage M13. Sequence analysis of a 2.1 kb chromosomal DNA fragment revealed one complete open reading frame, lipA, encoding a mature protein with a predicted molecular mass of 32.1 kDa. This protein shows high similarity to known lipases, especially Pseudomonas lipases, that are exported in a two-step secretion mechanism and require a lipase-specific chaperone. The identification of an export signal sequence at the N-terminus of the mature lipase suggests that the lipase of Acinetobacter is also exported via a two-step translocation mechanism. However, no chaperone-encoding gene was found downstream of lipA, unlike the situation in Pseudomonas. Analysis of an A. calcoaceticus mutant showing reduced lipase production revealed that a periplasmic disulphide oxidoreductase is involved in processing of the lipase. Via sequence alignments, based upon the crystal structure of the closely related Pseudomonas glumae lipase, a model has been made of the secondary-structure elements in AcLipA. The active site serine of AcLipA was changed to an alanine, via site-directed mutagenesis, resulting in production of an inactive extracellular lipase.

Chaperone-mediated activation in vivo of a Pseudomonas cepacia lipase

An extracellular Pseudomonas cepacia lipase, LipA, is inactive when expressed in the absence of the product of the limA gene. Evidence has been presented that LimA is a molecular chaperone. The lipA and limA genes have been cloned in separate and independently inducible expression systems in Escherichia coli. These systems were used to test the molecular chaperone hypothesis by investigating whether LimA could activate presynthesized prelipase and whether presynthesized LimA could activate newly synthesized prelipase. The results show that LimA cannot activate presynthesized prelipase and that presynthesized LimA can activate only a limited number of de novo synthesized prelipase molecules. Co-immunoprecipitation of prelipase/lipase with LimA generated a 1:1 complex of prelipase/lipase and LimA. The results suggest that a 1:1 complex of LipA and LimA is required for prelipase processing and secretion of active lipase.