Effect of preparation methods on the performance of CuFe-SSZ-13 catalysts for selective catalytic reduction of NOx with NH3

Organic matters adsorbed on goethite inhibited the heterogeneous aggregation and adsorption of CdSe quantum dots: Experiments and extended DLVO theory

The widespread use of Cd-based quantum dots (Cd-QDs) has led to their inevitable release into the environment, and the prevalent iron oxides and natural organic matter (NOM) are the key factors affecting the environmental behavior and fate of Cd-QDs. However, the impact of NOM adsorbed on iron oxides on the behavior of Cd-QDs with iron oxides and the mechanism of its interaction are not clear. In this study, two kinds of water-soluble QDs (CdSe QDs and core-shell CdSe/ZnS QDs) were selected to study the aggregation and adsorption behavior on goethite (Goe) and goethite-humic acid/fulvic acid composites (Goe-HA/FA). Aggregation kinetics and adsorption experiments between QDs and Goe(-HA/FA), characterization, and extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory calculations indicated that electrostatic interaction was the dominant force for QDs adsorption on Goe(-HA/FA). HA/FA changed the surface charge of Goe and increased the electrostatic repulsion and steric hindrance between the particles, which in turn inhibited the adsorption of QDs on Goe. Besides, unsubstituted aromatic carbons, carboxy carbons, and carbonyl carbons played an important role in the adsorption process, and chemisorption occurred between QDs and Goe(-HA/FA). Our findings are important for better assessing the transport, fate, and potential environmental impacts and risks of Cd-QDs in iron-rich environments.

Novel insights into the multistep chlorination of silver nanoparticles in aquatic environments

Due to the increasing applications, silver nanoparticles (AgNPs) are inevitably released into the environments and are subjected to various transformations. Chloride ion (Cl^-) is a common and abundant anion with a wide range of concentration in aquatic environments and exhibits a strong affinity for silver. The results indicate that AgNPs experienced multistep chlorination, which was dependent on the concentration of Cl^- in a non-linear manner. The dissolution of AgNPs was accelerated at Cl/Ag ratio of 1 and the intensive etching effect of Cl^- contributed to the significant morphology changes of AgNPs. The dissolved Ag⁺ quickly precipitated with Cl^- to form an amorphous and passivating AgCl(s) layer on the surface of AgNPs, thus the dissolution rate of AgNPs decreased at higher Cl/Ag ratios (100 and 1000). As the Cl/Ag ratio further increased to 10,000, the overall transformation rate increased remarkably due to the complexation of Cl^- with AgCl(s) to form soluble AgCl_x^(x-1)- species, which was verified by the reaction of AgCl nanoparticles with Cl^-. Besides, several environmental factors (electrolytes, surfactants and natural organic matter) affected AgNPs dissolution and the following chlorination. These results will expand the understanding of the environmental fate and potential risks of AgNPs in natural chloride-rich waters.

Study on the Performance of the Zr-Modified Cu-SSZ-13 Catalyst for Low-Temperature NH3-SCR

Cu-SSZ-13 and Zr-modified Cu-SSZ-13 catalysts with different Zr/Cu mass ratios were prepared by ion-exchange and impregnation methods, respectively. The NH₃-SCR performance tests were performed using the catalyst performance evaluation device to investigate the effects of different Zr/Cu mass ratios on the catalyst ammonia-selective catalytic reduction (NH₃-SCR) performance. X-ray diffraction, ICP-OES, BET, NH₃ temperature-programed desorption (NH₃-TPD), H₂ temperature-programmed reduction (H₂-TPR), X-ray photoelectron spectrometry, and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to characterize the catalysts. The results show that the prepared Cu-SSZ-13 catalyst had good catalytic activity. Zr introduction was carried out on this basis. The results showed that proper Zr doping improved the catalytic activity at low temperatures and widened the high-temperature stage, with an optimal activity stage at a Zr/Cu mass ratio of 0.2. The NO _x conversion efficiency was close to 100% at 200 °C and over 80% at 450 °C. The active species were well dispersed on the catalyst surface, and the metal modification did not change the crystal structure of the zeolite. The NH₃-TPD results showed that the Zr-modified catalyst had more abundant acid sites, and the H₂-TPR results indicated that the Cu species on the catalyst had excellent reducibility at low temperatures. The interaction between Cu and Zr could regulate the Cu⁺ and Cu²⁺ proportion on the catalyst surface, which facilitated the increase in the Cu⁺ for fast SCR reaction at low temperatures. With abundant acid sites and both SCR reactions following the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) mechanism on the catalyst surface at a low temperature of 150 °C, more abundant acid sites and reaction paths created favorable conditions for NH₃-SCR reactions at low temperatures.

Recent progress in performance optimization of Cu-SSZ-13 catalyst for selective catalytic reduction of NOx

Nitrogen oxides (NO_x), which are the major gaseous pollutants emitted by mobile sources, especially diesel engines, contribute to many environmental issues and harm human health. Selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) is proved to be one of the most efficient techniques for reducing NO_x emission. Recently, Cu-SSZ-13 catalyst has been recognized as a promising candidate for NH₃-SCR catalyst for reducing diesel engine NO_x emissions due to its wide active temperature window and excellent hydrothermal stability. Despite being commercialized as an advanced selective catalytic reduction catalyst, Cu-SSZ-13 catalyst still confronts the challenges of low-temperature activity and hydrothermal aging to meet the increasing demands on catalytic performance and lifetime. Therefore, numerous studies have been dedicated to the improvement of NH₃-SCR performance for Cu-SSZ-13 catalyst. In this review, the recent progress in NH₃-SCR performance optimization of Cu-SSZ-13 catalysts is summarized following three aspects: 1) modifying the Cu active sites; 2) introducing the heteroatoms or metal oxides; 3) regulating the morphology. Meanwhile, future perspectives and opportunities of Cu-SSZ-13 catalysts in reducing diesel engine NO_x emissions are discussed.

Review of the application of Cu-containing SSZ-13 in NH3-SCR-DeNO x and NH3-SCO

The reduction of NO x emissions has become one of the most important subjects in environmental protection. Cu-containing SSZ-13 is currently the state-of-the-art catalyst for the selective catalytic reduction of NO x with ammonia (NH3-SCR-DeNO x ). Although the current-generation catalysts reveal enhanced activity and remarkable hydrothermal stability, still open challenges appear. Thus, this review focuses on the progress of Cu-containing SSZ-13 regarding preparation methods, hydrothermal resistance and poisoning as well as reaction mechanisms in NH3-SCR-DeNO x . Remarkably, the paper reviews also the progress of Cu-containing SSZ-13 in the selective ammonia oxidation into nitrogen and water vapor (NH3-SCO). The dynamics in the NH3-SCR-DeNO x and NH3-SCO fields make this review timely.

A critical review on the role of abiotic factors on the transformation, environmental identity and toxicity of engineered nanomaterials in aquatic environment

Engineered nanomaterials (ENMs) are at the forefront of many technological breakthroughs in science and engineering. The extensive use of ENMs in several consumer products has resulted in their release to the aquatic environment. ENMs entering the aquatic ecosystem undergo a dynamic transformation as they interact with organic and inorganic constituents present in aquatic environment, specifically abiotic factors such as NOM and clay minerals, and attain an environmental identity. Thus, a greater understanding of ENM-abiotic factors interactions is required for an improved risk assessment and sustainable management of ENMs contamination in the aquatic environment. This review integrates fundamental aspects of ENMs transformation in aquatic environment as impacted by abiotic factors, and delineates the recent advances in bioavailability and ecotoxicity of ENMs in relation to risk assessment for ENMs-contaminated aquatic ecosystem. It specifically discusses the mechanism of transformation of different ENMs (metals, metal oxides and carbon based nanomaterials) following their interaction with the two most common abiotic factors NOM and clay minerals present within the aquatic ecosystem. The review critically discusses the impact of these mechanisms on the altered ecotoxicity of ENMs including the impact of such transformation at the genomic level. Finally, it identifies the gaps in our current understanding of the role of abiotic factors on the transformation of ENMs and paves the way for the future research areas.

Uptake, translocation, and transformation of silver nanoparticles in plants

This article reviews the plant uptake of silver nanoparticles (AgNPs) that occurred in soil systems and the in planta fate of Ag.

Synthesis of metal–organic frameworks (MOFs) and their application in the selective catalytic reduction of NOx with NH3

This review summarizes the synthesis, applications for the NH3-SCR and methods for strengthening the water resistance and thermal stability of MOF catalysts.

Ionic-strength-dependent effect of suspended sediment on the aggregation, dissolution and settling of silver nanoparticles

Suspended sediment (SS) is ubiquitous in natural waters and plays a key role in the fate of engineered nanomaterials. In this study, the effect of SS on the aggregation, settling, and dissolution of polyvinylpyrrolidone-coated silver nanoparticles (PVP-AgNPs) was investigated under environmentally relevant conditions. The heteroaggregation of AgNPs with SS was not observed at low ionic strength (≤0.01 M) due to high electrostatic repulsion and steric forces. At higher NaCl concentrations (0.1 and 0.3 M), PVP-AgNPs were found to attach onto the SS surface, and the formation of AgNP-SS heteroaggregates strongly promoted settling of PVP-AgNPs due to the overwhelming gravity force. PVP-AgNP dissolution was reduced after the addition of sediment to ultrapure water because the presence of sediment-associated dissolved organic matter (SS-DOM). The formation of an AgCl layer on PVP-AgNP surface in 0.01 M NaCl solution resulted in the minor effect of SS on AgNP dissolution. After addition of SS, the dissolved silver concentrations of PVP-AgNP increased in 0.1 and 0.3 M NaCl solution. The interactions of SS-DOM with AgNPs under different NaCl concentrations interfered the dissolution of AgNPs in sediment-laden water. This study provides new insight into the fate of AgNPs in sediment-laden water under various environmental conditions.

Chlortetracycline hydrochloride removal by different biochar/Fe composites: A comparative study

In the last years, the synthesis and applications of biochar/Fe composites have been extensively studied, but only few papers have systematically evaluated their removal performances. Herein, we successfully synthesized and structurally characterized Fe⁰, Fe₃C, and Fe₃O₄-coated biochars (BCs) for the removal of chlortetracycline hydrochloride (CH). Evaluation of their removal rate and affinity revealed that Fe⁰@BC could achieve better and faster CH removal and degradation than Fe₃C@BC and Fe₃O₄@BC. The removal rate was controlled by the O-Fe content and solution pH after the reaction. The CH adsorption occurred on the O C groups of Fe⁰@BC and the OC and OFe groups of Fe₃C@BC and Fe₃O₄@BC. Electron paramagnetic resonance analysis and radical quenching experiments indicated that HO and ¹O₂/ O₂^- were mainly responsible for CH degradation by biochar/Fe composites. Additional parameters, such as effects of initial concentrations and coexisting anions, regeneration capacity, cost and actual wastewater treatment were also explored. Principal component analysis was applied for a comprehensive and quantitative assessment of the three materials, indicating Fe⁰@BC is the most beneficial functional material for CH removal.

Graphene oxide nanoparticles and hematite colloids behave oppositely in their co-transport in saturated porous media

Since iron oxide minerals are ubiquitous in natural environments, the release of graphene oxide (GO) into environmental ecosystems can potentially interact with iron oxide particles and thus alter their surface properties, resulting in the change of their transport behaviors in subsurface systems. Column experiments were performed in this study to investigate the co-transport of GO nanoparticles and hematite colloids (a model representative of iron oxides) in saturated sand. The results demonstrated that the presence of hematite inhibited GO transport in quartz sand columns due to the formation of less negatively charged GO-hematite heteroaggregates and additional deposition sites provided by the adsorbed hematite on sand surfaces. Contrarily, GO co-present in suspensions significantly enhanced the transport of hematite colloids through different mechanisms such as the increase of electrostatic repulsion, decreased physical straining, GO-facilitated transport of hematite (i.e., highly mobile GO nanoparticles served as a mobile carrier for hematite). We also found that the co-transport behaviors of GO and hematite depended on solution chemistry (e.g., pH, ionic strength, and divalent cation (i.e., Ca²⁺)), which affected the electrostatic interaction as well as heteroaggregation behaviors between GO nanoparticles and hematite colloids. The findings provide an insight into the potential fate of carbon nanomaterials affected by mineral colloids existing in natural waters and soils.

Role of solution chemistry in the attachment of graphene oxide nanoparticles onto iron oxide minerals with different characteristics

Given the ubiquity and abundance of the iron oxide minerals and their important roles in affecting the environmental fate of graphene oxide (GO) nanoparticles, the attachment of GO onto three iron oxide minerals (i.e., hematite, goethite, and ferrihydrite) under different solution chemistry conditions was investigated in this study. The main mechanism of the attachment of GO was electrostatic interaction. Calculations based on the DLVO theory showed that the attachment was a favorable process. Interestingly, the affinity of GO towards three iron oxide minerals was in the order of ferrihydrite > goethite > hematite. This result indicates that different characteristics of various iron oxides (e.g., specific surface area, crystal structure, and surface charge, and surface hydroxyl densities) can influence their attachment capacities for GO. The attachment of GO depended on the solution pH and ionic strength. Electrostatic attraction and hydrogen bonding were the important retention mechanisms for GO attachment when pH < pH_PZC (the point of zero charge) and pH > pH_PZC, respectively. The attachment capacities of iron oxides decreased with increasing ionic strength at lower pH because of the decrease of the electrostatic attraction. Meanwhile, the presence of divalent cations (i.e., Ca²⁺ and Cu²⁺) could significantly promote GO attachment mainly by the surface-bridging mechanism. Meanwhile, the enhancement effect of Cu²⁺ was greater than Ca²⁺ due to the greater complexation affinity of Cu²⁺. Furthermore, attachment isotherms showed that the presence of phosphate could inhibit the attachment of GO onto minerals obviously. Because phosphate could form inner-sphere surface complex on the iron oxide surface, and consequently decreased the electrostatic attraction between nanoparticles and minerals. Our study has important implications for predicting the fate of GO in natural environment where amounts of iron oxide minerals are present.

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Series of Fe/Cu-SSZ-13 catalysts with different Fe loading content were synthesized by simple one-pot strategy. The obtained catalysts were subjected to selective catalytic reduction (SCR) of NO_x with NH₃ and were characterized by various techniques. The results show that Fe_0.63/Cu_1.50-SSZ-13 catalyst with proper Fe content exhibits excellent catalytic activity with widest operation temperature window from 160 to 580°C, excellent hydrothermal stability as well as good resistance to sulfur poisoning when compared with Cu-SSZ-13, signifying its great potential for practical applications. Further characterizations reveal that the synthesized Fe/Cu-SSZ-13 catalysts present typical chabazite (CHA) structure with good crystallinity, while isolated Cu²⁺ and monomeric Fe³⁺ are revealed as the predominant copper and iron species. At low temperatures, isolated Cu²⁺ species act as primary active sites for SCR reaction, while monomeric Fe³⁺ species provide sufficient active sites for sustain the SCR activity at high temperature. Moreover, Fe over doping would lead to the damage of zeolite structure, destruction of isolated Cu²⁺ site, as well as the formation of highly oxidizing Fe₂O₃, thus causing deterioration of catalytic performances.

Copper pre-exposure reduces AgNP bioavailability to wheat

Heavy metals in contaminated sites can affect plant responses to emerging contaminates such as engineered silver nanoparticles (AgNPs), but the underlying mechanisms are poorly understood. After 4-day exposure to 0-2.5 mg Cu L^-1 hydroponically, Cu concentrations in roots of wheat seedlings (Triticum aestivum L.) increased from 20 ± 3 to 325 ± 58 mg kg^-1. Meanwhile, the cell death in root tips, as measured by the uptake of Evans blue stain, increased 1.8-2.8 times in response to Cu exposure. Total thiol contents in roots (including glutathione, cysteine and phytochelatins), as measured by high performance liquid chromatography, increased 1.4 times upon low Cu exposure but decreased 2.2 times upon high Cu exposure. After those wheats were exposed to 10 mg L^-1 AgNPs for 8 h, the Ag influx rates decreased 1.3-3.9 times in Cu pre-exposed plants. Together, the cell death in root tips and thiol levels in roots could explain the decreased Ag influx rates of Cu pre-exposed plants. These findings indicate that the bioavailability of AgNPs without consideration of pre-existing metals could be over-estimated.

Excellent performance of one-pot synthesized Fe-containing MCM-22 zeolites for the selective catalytic reduction of NOx with NH3

One-pot synthesized OP-Fe/M22 zeolites exhibit excellent performances in NH₃-SCR reactions.

Effect of CaCO3 on catalytic activity of Fe–Ce/Ti catalysts for NH3-SCR reaction

In the present work, fresh and Ca poisoned Fe–Ce/Ti catalysts were prepared and used for the NH₃-SCR reaction to investigate the effect of Ca doping on the catalytic activity of catalysts. And these catalysts were characterized by BET, XRD, Raman, UV-vis DRS, XPS, H₂-TPR, and NH₃-TPD techniques. The obtained results demonstrate that Ca doping could lead to an obvious decrease in the catalytic activity of catalysts. The reasons for this may be due to the smaller specific surface area and pore volume, the decreased ratio of Fe³⁺/Fe²⁺ and Ce³⁺/Ce⁴⁺, as well as the reduced redox ability and surface acidity.

In the present work, fresh and Ca poisoned Fe–Ce/Ti catalysts were prepared and used for the NH₃-SCR reaction to investigate the effect of Ca doping on the catalytic activity of catalysts.