Persistence of pesticides-based contaminants in the environment and their effective degradation using laccase-assisted biocatalytic systems

Ecotoxicological strategies employing biochemical markers and organisms to monitor the efficacy of malathion photolysis treatment

The objective of this study was to assess the photolysis-mediated degradation of malathion in standard and commercial formulations, and to determine the toxicity of these degraded formulations. Degradation tests were carried out with 500 μg L-1 of malathion and repeated three times. The initial and residual toxicity was assessed by using Lactuca sativa seeds for phytotoxicity, Stegomyia aegypti larvae for acute toxicity, and Stegomyia aegypti mosquitoes (cultivated from the larval stage until emergence as mosquitoes) to evaluate the biochemical markers of sublethal concentrations. For the standard formulations the photolytic process efficiently reduced the initial concentration of malathion to levels below the regulatory limits however, the formation of byproducts was revealed by chromatography, which allowed for a more complete proposal of photolytic-mediated malathion degradation route. The degraded formulations inhibited the growth of L. sativa seeds, while only the untreated formulations showed larvicidal activity and mortality. Both formulations slightly inhibited acetylcholinesterase activity in S. aegypti mosquitoes, while the standard formulation decreased and the commercial formulation increased glutathione S-transferase activity. However, there were no significant differences for superoxide dismutase, esterase-α, esterase-β and lipid peroxidation. These findings indicate that in the absence of the target compound, the presence of byproducts can alter the enzymatic activity. In general, photolysis effectively degrade malathion lower than the legislation values; however, longer treatment times must be evaluated for the commercial formulation.

Potential lethality of organochlorine pesticides: Inducing fatality through inflammatory responses in the organism

BACKGROUND

Organochlorine pesticides, with their environmental persistence and bioaccumulation potential, have gained significant attention. This study explores the impact of organochlorine pesticides on mortality and chronic diseases, investigates their link to inflammatory states, and examines the role of anti-inflammatory diets in mitigating adverse reactions to these pesticides.

METHODS

This study, with 2,847 participants, used gas chromatography and mass spectrometry to measure organochlorine pesticide exposure in NHANES data. Conventional statistical methodologies, encompassing survival curves, Cox proportional hazards regression, regression analysis, and restricted quadratic spline analysis, were employed to investigate the association between pesticides and mortality, chronic ailments, and inflammation. Furthermore, machine learning techniques, comprising RF, AdaBoost, Extra-Trees, LightGBM, and BPNN, were leveraged to evaluate the impact of pesticides on chronic disease and mortality prognostication.

RESULTS

Organochlorine pesticides were significantly and positively correlated with increased mortality (p<0.05). Additionally, these pollutants were linked to the incidence of chronic diseases such as chronic kidney disease, diabetes, and hypertension (p< 0.05). Our study, utilizing various machine learning models, also showed a notable increase in the Area Under the Curve when incorporating organochlorine pesticide indicators into the model as opposed to excluding them. Furthermore, strong correlations were observed between serum c-reactive protein (CRP) and CRP to serum albumin ratio (CAR) concentrations with these substances, demonstrating their pro-inflammatory effects at specific concentrations. Interestingly, cutting down on dietary inflammation through changes in diet effectively reduced the risk of death at high organochlorine pesticide exposure levels, but the effect was less noticeable at low to moderate exposure levels.

CONCLUSIONS

Exposure to organochlorine pesticides was linked to a higher risk of mortality, likely due to an increased prevalence of chronic diseases. In this context, inflammation played a crucial role, and adopting an anti-inflammatory diet significantly reduced the mortality risk associated with these pesticides.

A Bioinspired Single-Atom Fe Nanozyme with Excellent Laccase-Like Activity for Efficient Aflatoxin B1 Removal

The applications of natural laccases are greatly restricted because of their drawbacks like poor biostability, high costs, and low recovery efficiency. M/NC single atom nanozymes (M/NC SAzymes) are presenting as great substitutes due to their superior enzyme-like activity, excellent selectivity and high stability. In this work, inspired by the catalytic active center of natural enzyme, a biomimetic Fe/NC SAzyme (Fe-SAzyme) with O2-Fe-N4 coordination is successfully developed, exhibiting excellent laccase-like activity. Compared with their natural counterpart, Fe-SAzyme has shown superior catalytic efficiency and excellent stability under a wide range of pH (3.0-9.0), temperature (4-80 °C) and NaCl strength (0-300 mm). Interestingly, density functional theory (DFT) calculations reveal that the high catalytic performance is attributed to the activation of O2 by O2-Fe-N4 sites, which weakened the O─O bonds in the oxygen-to-water oxidation pathway. Furthermore, Fe-SAzyme is successfully applied for efficient aflatoxin B1 removal based on its robust laccase-like catalytic activity. This work provides a strategy for the rational design of laccase-like SAzymes, and the proposed catalytic mechanism will help to understand the coordination environment effect of SAzymes on laccase-like catalytic processes.

Global insight into the occurrence, treatment technologies and ecological risk of emerging contaminants in sanitary sewers: Effects of the SARS-CoV-2 coronavirus pandemic

The SARS-CoV-2 pandemic caused changes in the consumption of prescribed/non-prescribed drugs and the population's habits, influencing the detection and concentration of emerging contaminants (ECs) in sanitary sewage and harming environmental and health risks. Therefore, the present work sought to discuss current literature data on the effects of the "COVID-19 pandemic factor" on the quality of raw sewage produced over a five-year period (2018-2019: pre-pandemic; 2020-2022: during the pandemic) and biological, physical, chemical and hybrid treatment technologies, influencing factors in the removal of ECs and potential ecological risks (RQs). Seven hundred thirty-one publications correlating sewage and COVID-19 were identified: 184 pre-pandemic and 547 during the pandemic. Eight classes and 37 ECs were detected in sewage between 2018 and 2022, with the "COVID-19 pandemic factor" promoting an increase in estrogens (+31,775 %), antibiotics (+19,544 %), antiepileptics and antipsychotics (+722 %), pesticides (+200 %), analgesics, anti-inflammatories and anticoagulants (+173 %), and stimulant medications (+157 %) in sanitary sewage. Among the treatment systems, aerated reactors integrated into biomembranes removed >90 % of cephalexin, clarithromycin, ibuprofen, estrone, and 17β-estradiol. The absorption, adsorption, and biodegradation mechanisms of planted wetland systems contributed to better cost-benefit in reducing the polluting load of sewage ECs in the COVID-19 pandemic, individually or integrated into the WWTP. The COVID-19 pandemic factor increased the potential ecological risks (RQs) for aquatic organisms by 40 %, with emphasis on clarithromycin and sulfamethoxazole, which changed from negligible risk and low risk to (very) high risk and caffeine with RQ > 2500. Therefore, it is possible to suggest that the COVID-19 pandemic intensified physiological, metabolic, and physical changes to different organisms in aquatic biota by ECs during 2020 and 2022.

Pesticides impacts on human health and the environment with their mechanisms of action and possible countermeasures

Pesticides are chemical constituents used to prevent or control pests, including insects, rodents, fungi, weeds, and other unwanted organisms. Despite their advantages in crop production and disease management, the use of pesticides poses significant hazards to the environment and public health. Pesticide elements have now perpetually entered our atmosphere and subsequently contaminated water, food, and soil, leading to health threats ranging from acute to chronic toxicities. Pesticides can cause acute toxicity if a high dose is inhaled, ingested, or comes into contact with the skin or eyes, while prolonged or recurrent exposure to pesticides leads to chronic toxicity. Pesticides produce different types of toxicity, for instance, neurotoxicity, mutagenicity, carcinogenicity, teratogenicity, and endocrine disruption. The toxicity of a pesticide formulation may depend on the specific active ingredient and the presence of synergistic or inert compounds that can enhance or modify its toxicity. Safety concerns are the need of the hour to control contemporary pesticide-induced health hazards. The effectiveness and implementation of the current legislature in providing ample protection for human health and the environment are key concerns. This review explored a comprehensive summary of pesticides regarding their updated impacts on human health and advanced safety concerns with legislation. Implementing regulations, proper training, and education can help mitigate the negative impacts of pesticide use and promote safer and more sustainable agricultural practices.

In silico and in vitro assays suggests Congo red dye degradation by a Lentinus sp. laccase enzyme

Laccase is a superfamily of ligninolytic enzymes known to degrade a wide variety of xenobiotics, including synthetic dyes. Congo Red (CR) has a diazo dye function, carcinogenic and mutagenic potential, and is currently applied in clinical analysis. The objective of this work was to produce and characterize the crude extract of Lentinus sp. in semi-solid fermentation (FSS) and perform in vitro and in silico studies to assess the potential of the crude extract to discolor the CR dye. Laccase activity was determined using ABTS as substrate and characterized. The in vitro discoloration was carried out using experimental design 22 at room temperature and monitored at 340 nm for 24h. Molecular docking and molecular dynamics simulations were performed between laccase and CR. The maximum laccase activity production was 29.63 U L-1 with six days of FSS. The optimal temperature and pH were 50 °C and 3.0, respectively. Discoloration of the CR dye was obtained only in tests containing CuSO4. Laccase formed stable complexes with the dye, presenting negative binding energy values ranging from -70.94 to -63.16 kcal mol-1 and the occurrence of seven hydrogen bonds. Molecular dynamics results showed the stability of the system (RMSD ranging from 1.0 to 2.5 Ä) and protein-ligand interaction along simulation. RMSF values pointed residues at the end of chains A (residues 300 to 305, 480 to 500) and B (residues 650 to 655 and 950 to 1000) as the most flexible regions of the laccase. This study highlighted the enzymatic action in the bioremediation of CR in vitro in agreement with the in silico simulations that demonstrate the enzyme potential.Communicated by Ramaswamy H. Sarma.

Surface-Functionalized Magnetic Silica-Malachite Tricomposite (Fe-M-Si tricomposite): A Promising Adsorbent for the Removal of Cypermethrin

This study assessed the efficacy of adsorption for eliminating the agricultural pesticide cypermethrin (CP) from wastewater using various adsorbents: silica, malachite, and magnetite. Magnetic nanocomposites (NCs) (with varying amounts of Fe3O4 0.1, 0.25, 0.5, 1.0, and 1.5 wt/wt %) were synthesized, including Fe3O4 nanoparticles (NPs), bicomposites, and tricomposites, calcined at 300 and 500 °C, and then tested for CP removal. The study was conducted in two phases, with the objective of initially assessing how effectively each individual NP performed and then evaluating how effectively the NCs performed when used for the adsorption of CP. Notably, the Fe3O4-malachite combination exhibited superior CP removal, with the 0.25-Fe-M NC achieving the highest adsorption at 635.4 mg/g. This success was attributed to the large surface area, magnetic properties of Fe3O4, and adsorption capabilities of malachite. The Brunauer-Emmett-Teller (BET) isotherm analysis indicated that the NCs had potential applications in adsorption and separation processes. The scanning electron microscopy and transmission electron microscopy revealed the spherical, irregular shaped morphology of the synthesized NPs and NCs. However, the X-ray diffraction (XRD) pattern of surface functionalized materials such as surface functionalized malachite [Cu2CO3(OH)2] with Fe3O4 and SiO2 may be complicated by the specific functionalization method used and the relative amounts and crystallographic orientations of each component. Therefore, careful interpretation and analysis of the XRD pattern, along with other techniques, are necessary for accurate identification and characterization of the functionalized material. The originality of this study lies in its comprehensive investigation of several adsorbents and NCs for CP removal at neutral pH. The innovation stems from the synergistic action of Fe3O4 and malachite, which results in improved CP removal due to their combined surface properties and magnetic characteristics. The application of magnetic NCs in adsorption and separation, as validated by BET isotherm analysis, highlights the potential breakthrough in addressing pesticide contamination.

Visual whole-process monitoring of pesticide residues: An environmental perspective using surface-enhanced Raman spectroscopy with dynamic borohydride-reduced silver nanoparticles

Environmental monitoring of pesticide residues in crops is essential for both food safety and environmental protection. Traditional methodologies face challenges due to the interference of endogenous compounds in peel and pulp tissues, often being invasive, labor-intensive, and inadequate for real-time observation of hazardous substance distribution. In this study, dynamic borohydride-reduced nanoparticles were employed as enhanced substrates. For the first time, surface-enhanced Raman spectroscopy (SERS) imaging was harnessed to enable whole-process visual detection of pesticide residues. The developed method is both stable and sensitive, boasting a detection lower limit below 1 pg/mL, coupled with robust quantitative analytical capabilities. This technique was successfully employed to detect residue signals across various crops and fruit juices. Furthermore, SERS imaging was utilized to map the distribution of pesticide residues from the exterior to the interior of fruits and vegetables. Vertex component analysis further refined the process by mitigating interference from plant autofluorescence. Collectively, this innovative strategy facilitates comprehensive pesticide residue monitoring, offering a potent tool for controlling hazardous substances in crops. Its potential applications extend beyond food safety, holding significant promise for sustainable agricultural production and enhanced environmental safeguarding.

Covalent organic framework in-situ immobilized laccase for the covalent polymerization removal of sulfamethoxazole in the presence of natural phenols: Prominent enzyme stability and activity

In current water treatment processes, pollutants are typically degraded into small molecules and CO2 for detoxification. This study employed laccase-mediated aggregation of new pollutants with natural phenolic compounds to remove pollutants by forming large molecular substances, effectively sequestering carbon. Free laccase is susceptible to environmental influences, causing deactivation. However, immobilizing laccase onto a carrier enhances enzyme stability. In the experiment, laccase was immobilized onto the covalent organic framework TpPa-1 through an in-situ loading process, resulting in immobilized laccase Lac@TpPa-1. Stability studies revealed that immobilized laccase outperformed free laccase in terms of pH, temperature, and recyclability. Moreover, immobilized laccase was employed for catalyzing the removal of emerging pollutants containing natural phenolic compounds, achieving an 80.53% removal rate with the addition of 0.02 g of laccase within 5 h. Analytical techniques like Fourier-transform ion cyclotron resonance mass spectrometry were used to uncover reaction pathways, demonstrating the presence of radical polymerization and 1, 4 nucleophilic addition. This research utilized TpPa-1 as a carrier for laccase immobilization, promoting oxidation-induced polymerization for efficient pollutant removal. It provides a theoretical foundation for understanding the interplay between emerging pollutants and phenolic compounds in natural environments and enhances the practical application of laccase through immobilization.

Research progress on remediation of organochlorine pesticide contamination in soil

Deteriorated soil pollution has grown into a worldwide environmental concern over the years. Organochlorine pesticide (OCP) residues, featured with ubiquity, persistence and refractoriness, are one of the main pollution sources, causing soil degradation, fertility decline and nutritional imbalance, and severely impacting soil ecology. Furthermore, residual OCPs in soil may enter the human body along with food chain accumulation and pose a serious health threat. To date, many remediation technologies including physicochemical and biological ways for organochlorine pollution have been developed at home and abroad, but none of them is a panacea suitable for all occasions. Rational selection and scientific decision-making are grounded in in-depth knowledge of various restoration techniques. However, soil pollution treatment often encounters the interference of multiple factors (climate, soil properties, cost, restoration efficiency, etc.) in complex environments, and there is still a lack of systematic summary and comparative analysis of different soil OCP removal methods. Thus, to better guide the remediation of contaminated soil, this review summarized the most commonly used strategies for OCP removal, evaluated their merits and limitations and discussed the application scenarios of different methods. It will facilitate the development of efficient, inexpensive and environmentally friendly soil remediation strategies for sustainable agricultural and ecological development.

A critical review of sustainable pesticide remediation in contaminated sites: Research challenges and mechanistic insights

Incidental pesticide application on farmlands can result in contamination of off-target biota, soil, groundwater, and surrounding ecosystems. To manage these pesticide contaminations sustainably, it is important to utilize advanced approaches to pesticide decontamination. This review assesses various innovative strategies applied for remediating pesticide-contaminated sites, including physical, chemical, biological, and nanoremediation. Integrated remediation approaches appear to be more effective than singular technologies. Bioremediation and chemical remediation are considered suitable and sustainable strategies for decontaminating contaminated soils. Furthermore, this study highlights key mechanisms underlying advanced pesticide remediation that have not been systematically studied. The transformation of applied pesticides into metabolites through various biotic and chemical triggering factors is well documented. Ex-situ and in-situ technologies are the two main categories employed for pesticide remediation. However, when selecting a remediation technique, it is important to consider factors such as application sites, cost-effectiveness, and specific purpose. In this review, the sustainability of existing pesticide remediation strategies is thoroughly analyzed as a pioneering effort. Additionally, the study summarizes research uncertainties and technical challenges associated with different remediation approaches. Lastly, specific recommendations and policy advocacy are suggested to enhance contemporary remediation approaches for cleaning up pesticide-contaminated sites.

A systematic review on the current situation of emerging pollutants in Mexico: A perspective on policies, regulation, detection, and elimination in water and wastewater

Emerging pollutants (EPs) emerged as a group of new compounds whose presence in the environment has been widely detected in Mexico. In this country, different concentrations of pharmaceutical compounds, pesticides, dyes, and microplastics have been reported, which vary depending on the region and the analyzed matrix (i.e., wastewater, surface water, groundwater). The evidence of the EPs' presence focuses on the detection of them, but there is a gap in information regarding is biomonitoring and their effects in health in Mexico. The presence of these pollutants in the country associated with lack of proper regulations in the discharge and disposal of EPs. Therefore, this review aims to provide a comprehensive view of the current environmental status, policies, and frameworks regarding Mexico's situation. The review also highlights the lack of information about biomonitoring since EPs are present in water even after their treatment, leading to a critical situation, which is high exposure to humans and animals. Although, technologies to efficiently eliminate EPs are available, their application has been reported only at a laboratory scale thus far. Here, an overview of health and environmental impacts and a summary of the research works reported in Mexico from 2014 to 2023 were presented. This review concludes with a concrete point of view and perspective on the status of the EPs' research in Mexico as an alert for government entities about the necessity of measures to control the EPs disposal and treatment.

A magnetic molecularly imprinted polymer based on an eco-friendly deep eutectic solvent for the selective recognition of dichlorodiphenyl trichloroethane and its degradation products in fruits and vegetables

A new magnetic molecularly imprinted polymer was successfully synthesized using a ternary deep eutectic solvent derived from caffeic acid-choline chloride-formic acid as a functional monomer, thymol-menthol deep eutectic solvent as a template, ethylene glycol dimethacrylate as a cross-linker, potassium peroxodisulfate as an initiator, and aqueous ethanol solution (90% (v/v)) as a porogen. The synthesized material was characterized and applied for magnetic solid-phase extraction of dichlorodiphenyl trichloroethane and its degradation products. Optimization of the extraction condition was carried out using the central composite design and response surface methodology. The good analytical performance of magnetic solid phase extraction/gas chromatography‒mass spectrometry using the proposed adsorbent shows a wide linear range of 0.07-500 ng g-1 with R2 greater than 0.992. Low detection limits and quantitation limits were observed in the ranges of 0.01-2.00 ng g-1 and 0.07-2.50 ng g-1, respectively. The precisions shown in terms of relative standard deviations were lower than 7.0% for intraday (n=5) and 8.6% for interday (n=5 × 3) experiments. The proposed method was applied for preconcentration and determination of dichlorodiphenyl trichloroethane and its degradation products in fruit and vegetable samples. The satisfactory recoveries of the real samples at three spiked concentrations were obtained in the range of 79.1%-110.9% with RSDs lower than 7.5%. The findings highlight the importance of developing efficient sorbents for the enrichment of persistent organic pollutants in food matrices.

Recent advances in microbial engineering approaches for wastewater treatment: a review

In the present era of global climate change, the scarcity of potable water is increasing both due to natural and anthropogenic causes. Water is the elixir of life, and its usage has risen significantly due to escalating economic activities, widespread urbanization, and industrialization. The increasing water scarcity and rising contamination have compelled, scientists and researchers, to adopt feasible and sustainable wastewater treatment methods in meeting the growing demand for freshwater. Presently, various waste treatment technologies are adopted across the globe, such as physical, chemical, and biological treatment processes. There is a need to replace these technologies with sustainable and green technology that encourages the use of microorganisms since they have proven to be more effective in water treatment processes. The present review article is focused on demonstrating how effectively various microbes can be used in wastewater treatment to achieve environmental sustainability and economic feasibility. The microbial consortium used for water treatment offers many advantages over pure culture. There is an urgent need to develop hybrid treatment technology for the effective remediation of various organic and inorganic pollutants from wastewater.

An insights of organochlorine pesticides categories, properties, eco-toxicity and new developments in bioremediation process

Organochlorine pesticides (OCPs) have been used in agriculture, increasing crop yields and representing a serious and persistent global contaminant that is harmful to the environment and human health. OCPs are typically bioaccumulative and persistent chemicals that can spread over long distances. The challenge is to reduce the impacts caused by OCPs, which can be achieved by treating OCPs in an appropriate soil and water environment. Therefore, this report summarizes the process of bioremediation with commercially available OCPs, considering their types, impacts, and characteristics in soil and water sources. The methods explained in this report were considered to be an effective and environmentally friendly technique because they result in the complete transformation of OCPs into a non-toxic end product. This report suggests that the bioremediation process can overcome the challenges and limitations of physical and chemical treatment for OCP removal. Advanced methods such as biosurfactants and genetically modified strains can be used to promote bioremediation of OCPs.

Introduction of multilayered quantum dot nanobeads into competitive lateral flow assays for ultrasensitive and quantitative monitoring of pesticides in complex samples

A competitive fluorescent lateral flow assay (CFLFA) is proposed for direct, ultrasensitive, quantitative detection of common pesticides imidacloprid (IMI) and carbendazim (CBZ) in complex food samples by using silica-core multilayered quantum dot nanobeads (SiO2-MQB) as liquid fluorescent tags. The SiO2-MQB nanostructure comprises a 200-nm SiO2 core and a shell of hundreds of carboxylated QDs (excitation/emission maxima ~365/631 nm), and can generate better stability, superior dispersibility, and higher luminescence than traditional fluorescent beads, greatly improving the sensitivity of current LFA methods for pesticides. Moreover, using liquid SiO2-MQB directly instead of via the conjugate pad both simplifies the structure of LFA system and improves the efficiency of immunobinding reactions between nanotags and the targets. Applying these methods, the established CFLFA realized the stable and accurate detection of IMI and CBZ in 12 min, with detection limits down to 1.94 and 14.79 pg/mL, respectively. The SiO2-MQB-CFLFA is practicable for application to real food samples (corn, apple, cucumber, and cabbage), and undoubtedly a promising and low-cost tool for on-site monitoring of trace pesticide residues.

Recent Advances in Applications of Oxidases and Peroxidases Polymer-Based Enzyme Biocatalysts in Sensing and Wastewater Treatment: A Review

Oxidase and peroxidase enzymes have attracted attention in various biotechnological industries due to their ease of synthesis, wide range of applications, and operation under mild conditions. Their applicability, however, is limited by their poor stability in harsher conditions and their non-reusability. As a result, several approaches such as enzyme engineering, medium engineering, and enzyme immobilization have been used to improve the enzyme properties. Several materials have been used as supports for these enzymes to increase their stability and reusability. This review focusses on the immobilization of oxidase and peroxidase enzymes on metal and metal oxide nanoparticle-polymer composite supports and the different methods used to achieve the immobilization. The application of the enzyme-metal/metal oxide-polymer biocatalysts in biosensing of hydrogen peroxide, glucose, pesticides, and herbicides as well as blood components such as cholesterol, urea, dopamine, and xanthine have been extensively reviewed. The application of the biocatalysts in wastewater treatment through degradation of dyes, pesticides, and other organic compounds has also been discussed.

Bioengineered microbial strains for detoxification of toxic environmental pollutants

Industrialization and other anthropogenic human activities pose significant environmental risks. As a result of the hazardous pollution, numerous living organisms may suffer from undesirable diseases in their separate habitats. Bioremediation, which removes hazardous compounds from the environment using microbes or their biologically active metabolites, is one of the most successful remediation approaches. According to the United Nations Environment Program (UNEP), deteriorating soil health negatively impacts food security and human health over time. Soil health restoration is critical right now. Microbes are widely known for their importance in cleaning up toxins present in the soil, such as heavy metals, pesticides, and hydrocarbons. However, the capacity of local bacteria to digest these pollutants is limited, and the process takes an extended time. Genetically modified organisms (GMOs), whose altered metabolic pathways promote the over-secretion of a variety of proteins favorable to the bioremediation process, can speed up the breakdown process. The need for remediation procedures, degrees of soil contamination, site circumstances, broad adoptions, and numerous possibilities occurring at various cleaning stages are all studied in detail. Massive efforts to restore contaminated soils have also resulted in severe issues. This review focuses on the enzymatic removal of hazardous pollutants from the environment, such as pesticides, heavy metals, dyes, and plastics. There are also in-depth assessments of present discoveries and future plans for efficient enzymatic degradation of hazardous pollutants.

Fitness assessment of Mytilus galloprovincialis Lamarck, 1819 after exposure to herbicide metabolite propachlor ESA

The lack of data on the chronic effects of chloroacetanilide herbicide metabolites on non-target aquatic organisms creates a gap in knowledge about the comprehensive impacts of excessive and repeated pesticide use. Therefore, this study evaluates the long-term effects of propachlor ethanolic sulfonic acid (PROP-ESA) after 10 (T1) and 20 (T2) days at the environmental level of 3.5 μg.L^-1 (E1) and its 10x fold multiply 35 μg.L^-1 (E2) on a model organism Mytilus galloprovincialis. To this end, the effects of PROP-ESA usually showed a time- and dose-dependent trend, especially in its amount in soft mussel tissue. The bioconcentration factor increased from T1 to T2 in both exposure groups - from 2.12 to 5.30 in E1 and 2.32 to 5.48 in E2. Biochemical haemolymph profile and haemocyte viability were not affected by PROP-ESA exposure. In addition, the viability of digestive gland (DG) cells decreased only in E2 compared to control and E1 after T1. Moreover, malondialdehyde levels increased in E2 after T1 in gills, and DG, superoxidase dismutase activity and oxidatively modified proteins were not affected by PROP-ESA. Histopathological observation showed several damages to gills (e.g., increased vacuolation, over-production of mucus, loss of cilia) and DG (e.g., growing haemocyte trend infiltrations, alterations of tubules). This study revealed a potential risk of chloroacetanilide herbicide, propachlor, via its primary metabolite in the Bivalve bioindicator species M. galloprovincialis. Furthermore, considering the possibility of the biomagnification effect, the most prominent threat poses the ability of PROP-ESA to be accumulated in edible mussel tissues. Therefore, future research about the toxicity of pesticide metabolites alone or their mixtures is needed to gain comprehensive results about their impacts on living non-target organisms.

Structural insights, biocatalytic characteristics, and application prospects of lignin-modifying enzymes for sustainable biotechnology-A review

Lignin modifying enzymes (LMEs) have gained widespread recognition in depolymerization of lignin polymers by oxidative cleavage. LMEs are a robust class of biocatalysts that include lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP), laccase (LAC), and dye-decolorizing peroxidase (DyP). Members of the LMEs family act on phenolic, non-phenolic substrates and have been widely researched for valorization of lignin, oxidative cleavage of xenobiotics and phenolics. LMEs implementation in the biotechnological and industrial sectors has sparked significant attention, although its potential future applications remain underexploited. To understand the mechanism of LMEs in sustainable pollution mitigation, several studies have been undertaken to assess the feasibility of LMEs in correlating to diverse pollutants for binding and intermolecular interactions at the molecular level. However, further investigation is required to fully comprehend the underlying mechanism. In this review we presented the key structural and functional features of LMEs, including the computational aspects, as well as the advanced applications in biotechnology and industrial research. Furthermore, concluding remarks and a look ahead, the use of LMEs coupled with computational frameworks, built upon artificial intelligence (AI) and machine learning (ML), has been emphasized as a recent milestone in environmental research.

Multi-level responses of oysters Crassostrea virginica for assessing organochlorine pesticides in a Ramsar coastal lagoon in southern Mexico

Organochlorine pesticides (OCPs) have been intensively used without proper regulation and control in Latin America due to the prevalence of diseases and pests, thus posing potential risks to nontarget organisms. Initiatives for ecosystem preservation, such as to designate protected areas, may not be enough to avoid contamination by OCPs, considering that protected areas tend to be permeable to diffuse sources. Here, we investigate multi-level responses of the oyster Crassostrea virginica to OCPs in Laguna de Términos, a RAMSAR coastal lagoon in the southern Gulf of Mexico. For this aim, OCPs occurrence and concentrations in the water, sediment, and in oysters from 3 settlement banks were assessed. Enzymatic and non-enzymatic biochemical biomarkers were quantified in the oysters' mantle and digestive gland, and the human health risk due to oyster consumption was also evaluated. OCPs in water were below detection limits. Fourteen OCPs were detected in sediments (∑OCPs mean of 49 ngg^-1) and 7 in oyster tissues (∑OCPs mean of 121 ngg^-1). The occurrence of OCPs was related to the land uses along the watersheds of the rivers that drain into the lagoon. Biochemical responses were correlated with OCPs (∑HCH, ∑DDT, heptachlor and endosulfan) in sediment, and oyster tissues. OCPs in oyster tissues showed a strong association with pro-oxidant forces and oxidative stress responses (Superoxide dismutase, Catalase, Glutathione Peroxidase, and lipid peroxidation), and neurotoxicity (Acetylcholinesterase), suggesting that the current OCPs contamination exerts significant stress. Our study also shows that the consumption of oysters from the lagoon increases the potential human health risk. Considering that Laguna de Términos is a protected Ramsar site, we suggest that environmental protection measures should be increased and that a monitoring program for OCPs exposure is necessary to assess the effects on this ecosystem.

Tartaric acid stabilized iridium nanoparticles with excellent laccase-like activity

Iridium nanoparticles with an average size of 1.7 nm (Tar-IrNPs) were synthesized by the reduction of IrCl₃ with NaBH₄ in the presence of tartaric acid. As prepared Tar-IrNPs showed not only oxidase, peroxidase and catalase activities but also exhibited unprecedented laccase-like activity, which can catalyze the oxidation of the substrates o-phenylenediamine (OPD) and p-phenylenediamine (PPD) accompanied by significant color changes. The superb catalytic performance is evidenced by the fact that Tar-IrNPs can achieve better laccase-like activity with only 2.5% of the dosage of natural laccase. Furthermore, they also exhibited superior thermal stability and broader pH adaptability (2.0-11) over that of natural laccase. Tar-IrNPs can retain more than 60% of their initial activity at 90 °C, while the natural laccase has totally lost its activity at 70 °C. At a prolonged reaction time, the oxidation products of OPD and PPD can form precipitates due to oxidation induced polymerization. Thus Tar-IrNPs have been successfully used for the determination and degradation of PPD and OPD.

Bioremediation potential of laccase for catalysis of glyphosate, isoproturon, lignin, and parathion: Molecular docking, dynamics, and simulation

The present study aimed to investigate the catalytic degradation produced by laccase in the detoxification of glyphosate, isoproturon, lignin polymer, and parathion. We explored laccase-glyphosate, laccase-lignin polymer, laccase-isoproturon, and laccase-parathion using molecular docking (MD) and molecular dynamics simulation (MDS) approaches. The results suggest that laccase interacts well with glyphosate, lignin polymer, isoproturon, and parathion during biodegradation. We calculated the root mean square deviations (RMSD) of laccase-glyphosate, laccase-lignin polymer, laccase-isoproturon, and laccase-parathion as 0.24 ± 0.02, 0.59 ± 0.32, 0.43 ± 0.07, and 0.43 ± 0.06 nm, respectively. In an aqueous solution, the stability of laccase with glyphosate, lignin polymer, isoproturon, and parathion is mediated through the formation of hydrophobic interactions, hydrogen bonds, and van der Waals interactions. The presence of xenobiotic toxic compounds in the active site changed the conformation of laccase. MDS of the laccase-substrate complexes confirmed their stability during catalytic degradation. Laccase assay results confirmed that the degradation of syringol, dihydroconiferyl alcohol, guaiacol, parathion, isoproturon, and glyphosate were 100%, 99.31%, 95.69%, 60.96%, 54.51%, and 48.34% within 2 h, respectively. Taken together, we describe a novel method to understand the molecular-level biodegradation of xenobiotic compounds through laccase and its potential application in contaminant removal.

Organophosphorus pesticides in southeastern China marginal seas: Land-based export and ocean currents redistribution

Organophosphorus pesticides (OPPs) have raised an increasing public concern due to their harmful impacts. To explore the occurrence and distribution of OPPs in southeastern China marginal seas (SCMS), a sampling campaign was carried out from East China Sea (ECS) to South China Sea (SCS). A total of 33 OPPs are quantified with the ΣOPPs concentrations ranging from 4.73 to 14.15 ng/L. Higher ΣOPPs concentrations in the surface seawater from the estuaries of Yangtze River, Minjiang River, and Pearl River than those at other sampling sites indicates that riverine emissions are the principal sources of OPPs in SCMS. Different compositions of OPPs in ECS and SCS highlight the different priority of use categories for OPPs in China coastal region. In addition, the vertical diffusion and upwelling ocean currents play critical roles in the redistribution of OPPs in SCMS. For the first time, the ΣOPPs mass inventories in surface seawater of ECS and SCS are estimated at 8.51 and 11.26 t, respectively. Although the current ecological risk of OPPs is at low level in surface seawater of SCMS, the long-term use and bio-accumulative potential point to the necessity for the normalized monitoring of OPPs in China.

Lignocellulolytic Biocatalysts: The Main Players Involved in Multiple Biotechnological Processes for Biomass Valorization

Human population growth, industrialization, and globalization have caused several pressures on the planet's natural resources, culminating in the severe climate and environmental crisis which we are facing. Aiming to remedy and mitigate the impact of human activities on the environment, the use of lignocellulolytic enzymes for biofuel production, food, bioremediation, and other various industries, is presented as a more sustainable alternative. These enzymes are characterized as a group of enzymes capable of breaking down lignocellulosic biomass into its different monomer units, making it accessible for bioconversion into various products and applications in the most diverse industries. Among all the organisms that produce lignocellulolytic enzymes, microorganisms are seen as the primary sources for obtaining them. Therefore, this review proposes to discuss the fundamental aspects of the enzymes forming lignocellulolytic systems and the main microorganisms used to obtain them. In addition, different possible industrial applications for these enzymes will be discussed, as well as information about their production modes and considerations about recent advances and future perspectives in research in pursuit of expanding lignocellulolytic enzyme uses at an industrial scale.

The status and natural impact of floriculture production in Ethiopia: a systematic review

Ethiopia's floriculture industry is exceedingly emerging, and, currently, it ranks as the sixth largest exporter of roses worldwide and second largest in Africa. Currently, many flowers, such as rose, gypsophila, carnations, and chrysanthemum, are growing. However, floriculture farms are contributing a high level of health risks and environmental problems in Ethiopia. Thus, the purpose of this paper is to scrutinize the status and impacts of floriculture industries in Ethiopia. The floriculture division is an emerging sector in Ethiopia, and the number of farms, income, job opportunities, and diversity of flowers are increasing. However, the health risks and environmental fates of the sector are also increasing. Ethiopian floriculture farms lack waste disposal technologies and workers' protective equipment and safety, and the chemicals, plastics, and corrugated irons used in the farms are carelessly disposed everywhere. Pesticides, plastics, and fertilizers are also freely discharged into water bodies and terrestrial land, which is causing the development of health risks; aquatic life hazards; and soil, water, and air pollution. However, Ethiopia has no strong and functional system or structure to control the impacts of floriculture farms. The government and the farm owners are not thoughtful about the environmental issues, health concerns, and socioeconomic impacts of the wastes. The government lacks regular control and assessment of farms, and the farms are engaging for their profit. Nevertheless, developed countries are currently using both natural and modern technologies to manage floricultural wastes. Ethiopia should therefore suggest manageable possible approaches and sound management strategies based on the findings of the analyses.

Genetically engineered microorganisms for environmental remediation

In the recent era, the increasing persistence of hazardous contaminants is badly affecting the globe in many ways. Due to high environmental contamination, almost every second species on earth facing the worst issue in their survival. Advances in newer remediation approaches may help enhance bioremediation's quality, while conventional procedures have failed to remove hazardous compounds from the environment. Chemical and physical waste cleanup approaches have been used in current circumstances; however, these methods are costly and harmful to the environment. Thus, there has been a rise in the use of bioremediation due to an increase in environmental contamination, which led to the development of genetically engineered microbes (GEMs). It is safer and more cost-effective to use engineered microorganisms rather than alternative methods. GEMs are created by introducing a stronger protein into bacteria through biotechnology or genetic engineering to enhance the desired trait. Biodegradation of oil spills, halobenzoates naphthalenes, toluenes, trichloroethylene, octanes, xylenes etc. has been accomplished using GEMs such bacteria, fungus, and algae. Biotechnologically induced microorganisms are more powerful than naturally occurring ones and may degrade contaminants faster because they can quickly adapt to new pollutants they encounter or co-metabolize. Genetic engineering is a worthy process that will benefit the environment and ultimately the health of our people.

A study of potent biofertiliser and its degradation ability of monocrotophos and its in silico analysis

Potassium (K) and phosphorus (P) are the important macronutrients needed for the plant development, but it is widely present in an insoluble form for the plant's uptake. In order to increase the productivity, biofertilisers play crucial role in plant growth enhancement. Our present work focused to isolate potassium-phosphate solubilizing bacteria from the agricultural soil of tomato cultivated soil. Potassium and phosphate solubilization and degradation of monocrotophos was estimated spectrophotometrically. Out of thirteen isolates, two isolates proved to be the best P and K solubilizers. The bacterial isolates (SDKVG02 and SDKVG04) were optimized to obtain maximum P and K solubilization of 57.5 mg L-1 and 15.07 mg L-1 by the isolates. Pot experiments were conducted using SDKVG 02 and 04, immobilized on carrier materials, peat proving the best carrier with the total average green gram and chick pea length of 11.66 ± 0.0666 22.22 ± 0.0577. The MCP degradation percentage was achieved at 80 ppm of MCP with 75.8% and 64.10% by SDKVG 02 and SDKVG 04. Furthermore, production of organic acids such as malic acid, phthalic acid, ascorbic acid, nicotinic acid, and tartaric acid paves solubilization of P and K. The isolates were recognized based on 16S rRNA gene sequencing as Enterobacter hormaechei- SDKVG-02, Enterobacter cloacae SDKVG- 04. The KSB-PSB isolates also express N-fixing activity which is proved through In-silico analysis. It is worth to highlight SDKVG 02 and 04 would be potent biofertiliser exploited in increasing the soil fertility and crop productivity as well in degradation of monocrotophos present in the soil.

Latest eco-friendly approaches for pesticides decontamination using microorganisms and consortia microalgae: A comprehensive insights, challenges, and perspectives

Pesticides are chemical compounds that are considered toxic to many organisms, including humans. Their elimination from polluted sites attracted the attention of Scientifics in the last decade; Among the various methods used to decontaminate pesticides from the environment, the microbial-algae consortium is a promising bioremediation technology, which implies several advantages as an eco-friendly process that generate biomass produced that could be valorized in the form of bioenergy, In this review, we will discuss the latest eco-friendly approaches using microorganisms to remediate sites contaminated by pesticides, and shows the ability of microbial, algae and their consortium to remove pesticides and the role of different enzymes in degradation processes.

A novel Fe/Mo co-catalyzed graphene-based nanocomposite to activate peroxymonosulfate for highly efficient degradation of organic pollutants

A novel 3D α-FeOOH@MoS₂/rGO nanocomposite was successfully fabricated by a simple in situ hydrothermal method. It is a highly efficient heterogeneous catalyst in activation of peroxymonosulfate (PMS) for rapid degradation of rhodamine B (RhB), with 99.9% of RhB removed within 20 min. The introduction of rGO contributes to uniform dispersion and sufficient contact of α-FeOOH and MoS₂ nanosheets. Highly active Mo(IV) enhances the reduction of Fe(III), improves Fe(III)/Fe(II) conversion and promotes the generation of O₂1, which ensures an improved catalytic activity. MoS₂/rGO hybrid can effectively solve the problem of material reunion and make α-FeOOH exhibit excellent catalytic performance. The α-FeOOH@MoS₂-rGO/PMS system is a co-catalytic system based on the active components of α-FeOOH and MoS₂. The main reactive oxygen species in the α-FeOOH@MoS₂-rGO/PMS system are O₂1, SO₄^.- and ⋅O₂^-, which contribute to a high reactivity over a wide range of pH (5-9). Besides, this system is highly resistant to anions (Cl^-, SO₄^2-) and natural organic matter (humic acid), and can be widely used for degradation of common organic pollutants. The α-FeOOH@MoS₂/rGO is a promising Fenton-like catalyst for refractory organic wastewater treatment.

Endocrine disrupting chemicals in the environment: Environmental sources, biological effects, remediation techniques, and perspective

Endocrine disrupting chemicals (EDCs) have been identified as emerging contaminants, which poses a great threat to human health and ecosystem. Pesticides, polycyclic aromatic hydrocarbons, dioxins, brominated flame retardants, steroid hormones and alkylphenols are representative of this type of contaminant, which are closely related to daily life. Unfortunately, many wastewater treatment plants (WWTPs) do not treat EDCs as targets in the normal treatment process, resulting in EDCs entering the environment. Few studies have systematically reviewed the related content of EDCs in terms of occurrence, harm and remediation. For this reason, in this article, the sources and exposure routes of common EDCs are systematically described. The existence of EDCs in the environment is mainly related to human activities (Wastewater discharges and industrial activities). The common hazards of these EDCs are clarified based on available toxicological data. At the same time, the mechanism and effect of some mainstream EDCs remediation technologies (such as adsorption, advanced oxidation, membrane bioreactor, constructed wetland, etc.) are separately mentioned. Moreover, our perspectives are provided for further research of EDCs.

The association between organophosphate insecticides and blood pressure dysregulation: NHANES 2013-2014

BACKGROUND

Organophosphate (OP) insecticides represent one of the largest classes of sprayed insecticides in the U.S., and their use has been associated with various adverse health outcomes, including disorders of blood pressure regulation such as hypertension (HTN).

METHODS

In a study of 935 adults from the NHANES 2013-2014 cycle, we examined the relationship between systolic and diastolic blood pressure changes and urinary concentrations of three OP insecticides metabolites, including 3,5,6-trichloro-2-pyridinol (TCPy), oxypyrimidine, and para-nitrophenol. These metabolites correspond to the parent compounds chlorpyrifos, diazinon, and methyl parathion, respectively. Weighted, multivariable linear regression analysis while adjusting for potential confounders were used to model the relationship between OP metabolites and blood pressure. Weighted, multivariable logistic regression analysis was used to model the odds of HTN for quartile of metabolites.

RESULTS

We observed significant, inverse association between TCPy on systolic blood pressure (β-estimate = -0.16, p < 0.001) and diastolic blood pressure (β-estimate = -0.15, p < 0.001). Analysis with para-nitrophenol revealed a significant, positive association with systolic blood pressure (β-estimate = 0.03, p = 0.02), and an inverse association with diastolic blood pressure (β-estimate = -0.09, p < 0.001). For oxypyrimidine, we observed significant, positive associations between systolic blood pressure (β-estimate = 0.58, p = 0.03) and diastolic blood pressure (β-estimate = 0.31, p < 0.001). Furthermore, we observed significant interactions between TCPy and ethnicity on systolic blood pressure (β-estimate = 1.46, p = 0.0036). Significant interaction terms were observed between oxypyrimidine and ethnicity (β-estimate = -1.73, p < 0.001), as well as oxypyrimidine and BMI (β-estimate = 1.51 p < 0.001) on systolic blood pressure, and between oxypyrimidine and age (β-estimate = 1.96, p = 0.02), race (β-estimate = -3.81 p = 0.004), and BMI on diastolic blood pressure (β-estimate = 0.72, p = 0.02). A significant interaction was observed between para-nitrophenol and BMI for systolic blood pressure (β-estimate = 0.43, p = 0.01), and between para-nitrophenol and ethnicity on diastolic blood pressure (β-estimate = 2.19, p = 0.006). Lastly, we observed a significant association between the odds of HTN and TCPy quartiles (OR = 0.65, 95% CI [0.43,0.99]).

CONCLUSION

Our findings support previous studies suggesting a role for organophosphate insecticides in the etiology of blood pressure dysregulation and HTN. Future studies are warranted to corroborate these findings, evaluate dose-response relationships between organophosphate insecticides and blood pressure, determine clinical significance, and elucidate biological mechanisms underlying this association.

Degradation and Detoxification of Chlorophenols with Different Structure by LAC-4 Laccase Purified from White-Rot Fungus Ganoderma lucidum

A laccase named LAC-4 was purified from Ganoderma lucidum. Firstly, the enzymatic properties of purified LAC-4 laccase, and the degradation of three chlorophenol pollutants 2,6-dichlorophenol (2,6-DCP), 2,3,6-trichlorophenol (2,3,6-TCP) and 3-chlorophenol (3-CP) by LAC-4 were systematically studied. LAC-4 had a strong ability for 2,6-DCP and 2,3,6-TCP degradation. The degradation ability of LAC-4 to 3-CP was significantly lower than that of 2,6-DCP and 2,3,6-TCP. LAC-4 also had a good degradation effect on the chlorophenol mixture (2,6-DCP + 2,3,6-TCP). The results of kinetics of degradation of chlorophenols by LAC-4 suggested that the affinity of LAC-4 for 2,6-DCP was higher than 2,3,6-TCP. The catalytic efficiency and the catalytic rate of LAC-4 on 2,6-DCP were also significantly higher than 2,3,6-TCP. During degradation of 2,6-DCP and 2,3,6-TCP, LAC-4 had a strong tolerance for high concentrations of different metal salts (such as MnSO₄, ZnSO₄, Na₂SO₄, MgSO₄, CuSO₄, K₂SO₄) and organic solvents (such as ethylene glycol and glycerol). Next, detoxification of chlorophenols by LAC-4 was also systematically explored. LAC-4 treatment had a strong detoxification ability and a good detoxification effect on the phytotoxicity of individual chlorophenols (2,6-DCP, 2,3,6-TCP) and chlorophenol mixtures (2,6-DCP + 2,3,6-TCP). The phytotoxicities of 2,6-DCP, 2,3,6-TCP and chlorophenol mixtures (2,6-DCP + 2,3,6-TCP) treated with LAC-4 were considerably reduced or eliminated. Finally, we focused on the degradation mechanisms and pathways of 2,6-DCP and 2,3,6-TCP degradation by LAC-4. The putative transformation pathway of 2,6-DCP and 2,3,6-TCP catalyzed by laccase was revealed for the first time. The free radicals formed by LAC-4 oxidation of 2,6-DCP and 2,3,6-TCP produced dimers through polymerization. LAC-4 catalyzed the polymerization of 2,6-DCP and 2,3,6-TCP, forming dimer products. LAC-4 catalyzed 2,6-DCP into two main products: 2,6-dichloro-4-(2,6-dichlorophenoxy) phenol and 3,3′,5,5′-tetrachloro-4,4′-dihydroxybiphenyl. LAC-4 catalyzed 2,3,6-TCP into two main products: 2,3,6-trichloro-4-(2,3,6-trichlorophenoxy) phenol and 2,2′,3,3′,5,5′-hexachloro-[1,1′-biphenyl]-4,4′-diol.

A pilot study for enhanced transformation of a metabolite 3,5-dichloroaniline derived from dicarboximide fungicides through immobilized laccase mediator system

This pilot investigation aimed to evaluate the removal efficiency and the underlying biocatalytic pathways of immobilized fungal laccase during the oxidative biotransformation of a non-phenolic metabolite, 3,5-dichloroaniline (3,5-DCA) derived from dicarboximide fungicides. The maximum loading of laccase on the microporous support surfaces could reach 36.4 mg/g. The immobilized laccase on the microporous support surfaces exhibited excellent thermal stability, pH adaptability, storage stability, and reusability compared to free laccase. The ILMS assay indicated that the immobilized laccase efficiently removed studied 3,5-DCA (99-100%) in the aqueous medium, within 72 h in the presence of catechol. In this study, we identified three coupling reaction products during the removal of 3,5-DCA through an ILMS assay. Based on the identified coupling reaction products, we proposed the reaction pathway for the biotransformation of 3,5-DCA by immobilized laccase, which was shown to be potentially useful in the sustainable environmental remediation of aniline metabolite (i.e., 3,5-DCA) derived from dicarboximide fungicides.

Laccase-mediated synthesis of bioactive natural products and their analogues

Laccases are a class of multicopper oxidases that catalyse the one-electron oxidation of four equivalents of a reducing substrate, with the concomitant four-electron reduction of dioxygen to water. Typically, they catalyse many anabolic reactions, in which mostly phenolic metabolites were subjected to oxidative coupling. Alternatively, laccases catalyse the degradation or modification of biopolymers like lignin in catabolic processes. In recent years, laccases have proved valuable and green biocatalysts for synthesising compounds with therapeutic value, including antitumor, antibiotic, antimicrobial, and antioxidant agents. Further up to date applications include oxidative depolymerisation of lignin to gain new biomaterials and bioremediation processes of industrial waste. This review summarizes selected examples from the last decade's literature about the laccase-mediated synthesis of biologically active natural products and their analogues; these will include lignans and neolignans, dimeric stilbenoids, biflavonoids, biaryls and other compounds of potential interest for the pharmaceutical industry. In addition, a short section about applications of laccases in natural polymer modification has been included.

Occurrence, toxic effects, and mitigation of pesticides as emerging environmental pollutants using robust nanomaterials - A review

Increasing demand of food and agriculture is leading us towards the increasing use and introduction of pesticides to the environment. The upright increase of pesticides in water and associated adverse effects have become a great point of concern to develop proficient methods for their mitigation from water. Various different methods have been traditionally employed for this purpose. Recently, nanotechnology has turned out to be the field of prodigious interest for this purpose, and various specific methods were developed and employed to remove pesticides from water. In this study, nanotechnological methods such as adsorption and degradation have been thoroughly discussed along with their applications and limitations where different types of nanoparticles, nanocomposites, nanotubes, and nanomembranes have played a vital role. However, in this study the most commonly adopted method of adsorption is considered to be the better technique due to its low cost, efficiency, and ease of operation. The adsorption kinetic models were described to explain the efficiency of the nano-adrsorbants in order to evaluate the mass transfer processes. However, various degradation methodologies including photocatalysis and catalytic reduction have also been elaborated. Numerous robust metal, metal oxide and functionalized magnetic nanomaterials have been emphasized, categorized, and compared for the removal of pesticides from water. Additionally, current challenges faced by researchers and future directions have also been provided.

Application of activated carbon fabric for the removal of a recalcitrant pesticide from agricultural run-off

Removal of pesticides from agricultural run-off close to the point of application has the potential to prevent or reduce the pollution of water sources used for drinking. This research considered the novel application of activated carbon (AC) fabric as a sorbent material for removal of pesticides from field run-off. AC fabric was tested for the removal of the molluscicide pesticide metaldehyde under a range of flow rates at both laboratory and pilot scale. Metaldehyde at an initial concentration of 10 μg/L was removed effectively from deionised (DI) water and real source water by the AC cloth under all conditions tested, reaching removal of 1375 and 876 μg/g (equivalent to 169 and 264 mg/m²), respectively. The adsorption followed pseudo-second order kinetics (k₂ of 29.9 and 34.8 g/μg min for the AC fabric and GAC), providing rapid removal of metaldehyde within the first 5 min of contact. In single pass and flow through conditions, stabilised removal of 46% metaldehyde was achieved by the AC fabric bundle for treatment of 700 L of real water in a pilot scale flume. This equated to removal of 454 μg/m², although significantly more removal would be expected over longer duration testing given the stabilised removal and the equilibrium capacity of the fabric seen during the batch isotherm testing. The work provides evidence to show that AC fabric could be used in the catchment to reduce peak loads of pesticides in sources used for drinking water.

Fabrication of highly sensitive and uniform Ag/PS/PDMS SERS substrate and its application forin-situdetection

In this study, we developed a flexible and transparent silver/polystyrene/polydimethylsiloxane (Ag/PS/PDMS) substrate with both high density of hot spots and satisfactory uniformity using a cost-effective approach. Via template-guided self-assembly, PS beads were arranged regularly in nanobowls of a square array on PDMS, whose surface structure was transferred from a commercial complementary metal oxide semiconductor chip. Roughness was introduced onto the PS bead surface by nitrogen plasma treatment, followed by sputtering of Ag which generated many hot spots. Differential roughness on the PS bead surface greatly influenced the morphology of the Ag/PS/PDMS substrate. A meat-ball like surface structure was formed with a plasma etching time of 5 min, whose growth mechanism was proposed based on the scanning electron microscope analysis. The high sensitivity and desirable uniformity of the meat-ball like Ag/PS/PDMS substrate were demonstrated by using crystal violet as a Raman reporter, exhibiting an enhancement factor of 2.7 × 10⁷and a relative standard deviation of 5.04%. Thiram of a lower concentration than the maximum residue limit on the cucumber surface could easily be detectedin situby the proposed substrate, demonstrating its great potential forin-situfood safety analysis.

Identification, characterization and expression of rice (Oryza sativa) acetyltransferase genes exposed to realistic environmental contamination of mesotrione and fomesafen

The plant acetyltransferases (ACEs) belong to a super family of proteins that contribute to secondary metabolisms and involve various abiotic and biotic stress responses. However, how rice ACEs respond to toxic agrochemicals is largely unknown. This study demonstrates that 86 and 83 genes coding ACEs in the transcriptome profiling were expressed under mesotrione (MTR) and fomesafen (FSA) exposure, respectively. Of these, 18 and 8 ACE differentially expressed genes (DEGs) were identified in MTR- and FSA-exposed rice transcriptome datasets. Some of the ACE genes were validated by quantitative RT-PCR analysis. Analysis of biochemical properties of ACEs revealed that many genes have various cis-elements and structural domain which may cope with a variety of biotic and abiotic stress responses and detoxification of xenobiotics. Moreover, the ACE activities in rice were induced under MTR and FSA exposure and reached out to the highest value at the 0.1 mg L^-1. The ACE activities in the MTR and FSA treated roots were 2.6 and 3.5 fold over the control and those in shoots with MTR and FSA were 4.0 and 26.1 fold over the control, respectively. These results indicate that the ACE-coding genes can respond to the MTR and FSA stress by increasing their transcriptional level, along with the enhanced specific ACE protein activities in rice tissues.

Parental diuron exposure causes lower hatchability and abnormal ovarian development in offspring of medaka (Oryzias melastigma)

Diuron is one of the most widely used herbicides worldwide. It has been widely detected in various aquatic environments, especially in marine ecosystems. Although direct effects of diuron exposure on various organisms have been reported, little is known about its effects on marine fishes including multigenerational effects. Herein, the filial generation (F1) of diuron-exposed marine medaka (Oryzias melastigma) (F0) was raised in clean seawater from fertilized eggs to adulthood and used as a marine fish model to study the potential multigenerational effects of diuron. We found that the successful hatching of F1 larvae was significantly reduced and that ovarian development in F1 females was retarded. A significant increase in the percentage of previtellogenic oocytes, along with a visual decrease in the percentage of vitellogenic and mature oocytes in the F1 ovary, were observed. The hormone levels of the hypothalamus-pituitary-gonad-liver axis and vitellogenin-related transcription were downregulated. In addition, the mRNA levels of DNA methyltransferase in the brain, ovary and liver of F1 adult fish exhibited significant upregulation, suggesting that the probable underlying multigenerational mechanism might be associated with epigenetic modifications. Taken together, these results demonstrated that chronic environmental diuron exposure in F0 marine medaka can inhibit F1 ovary development and suggested that diuron may affect marine fish thriving in the ocean.

Laccase-Driven Transformation of High Priority Pesticides Without Redox Mediators: Towards Bioremediation of Contaminated Wastewaters

In this study, Pleurotus dryinus was grown on municipal biosolids (BS) as the substrate to produce laccase for the removal of pesticides (fungicides, herbicides, and insecticides) from wastewater. Among the various types of BS tested, sterilized biosolids were the most promising substrate for laccase production by P. dryinus with a maximal laccase activity (162.1 ± 21.1 U/g dry substrate), followed by hygenized biosolids (96.7 ± 17.6 U/g dry substrate), unsterilized biosolids (UBS) (31.9 ± 1.2 U/g dry substrate), and alkali-treated biosolids (8.2 ± 0.4 U/g dry substrate). The ultrasound-assisted extraction of this enzyme from fermented UBS was carried out with 0.1 M phosphate buffer at pH 7.0, which increased the enzyme activity of the crude extract by 30%. To test the catalytic potential of the biocatalyst in real matrices, 1 U/ml of recovered crude laccase extract was applied for 24 h for the removal of 29 pesticides (nine fungicides, 10 herbicides, and 10 insecticides) either separately or as a mixture from spiked biologically treated wastewater effluent. When treated with crude enzyme extract, high-priority herbicides metolachlor and atrazine were completely removed, while 93%–97% of the insecticides aldicarb, spinosad, and azinphos-methyl and up to 91% of kresoxim-methyl were removed. Promising results were obtained with BS-derived crude enzyme extract exhibiting improved pesticides removal, which may be due to the mediator effect resulting from the catalytic transformation of other molecules in the cocktail. The results demonstrated a promising integrated bioprocess for the removal of pesticides in wastewater using crude laccase obtained from BS.

Highly hazardous pesticides and related pollutants: Toxicological, regulatory, and analytical aspects

The pervasive manifestation and toxicological influence of hazardous pesticides pose adverse consequences on various environmental matrices and humans, directly via bioaccumulation or indirectly through the food chain. Due to pesticide residues' continuous presence above permissible levels in multiple forms, much attention has been given to re-evaluating to regulate their usage practices without harming or affecting the environment. However, there are regulations in place banning the use of multiple hazardous pesticides in the environment. Thus, efforts must be made to achieve robust detection and complete mitigation of pesticides, possibly through a combination of new and conventional methods. The complex nature of pesticides helps them to react differently across different environmental matrices. Therefore, highly hazardous pesticides are a risk to human well-being and the environment through enzymatic inhibition and the induction of oxidative stress. Consequently, developing fast, sensitive sensing strategies is essential to detect and quantify multiple pesticides and remove the pesticides present in the specific matrix without creating harmful derivatives. Additionally, the technology should be available worldwide to eliminate pesticide residuals from the environment. There are regulations, in practice, that limit the selling, storage, use of pesticides, and their concentration in the environment, although such regulations must be revised. However, the existing literature lacks regulatory, analytical detection, and mitigation considerations for pesticide remediation. Furthermore, the enforcement of such regulations and strict monitoring of pesticides in developing countries are needed. This review spotlights various analytical detection, regulatory, and mitigation considerations for efficiently removing hazardous pesticides.

A new approach for reducing pollutants level: a longitudinal cohort study of physical exercises in young people

BACKGROUND

The present study aimed to evaluate the elimination of three common pollutants (dimethoate, benzo(a)pyrene (BaP) and bisphenol A (BPA) by different physical exercises and to assess the possible factors which could affect the pollutants elimination.

METHODS

A total of 200 individuals who chose different kinds of exercises in accordance to their own wish were recruited. The levels of urinary pollutants were measured using β-glucuronidase hydrolysis followed by a high-performance liquid chromatography tandem mass spectrometry-based method.

RESULTS

Totally, the levels of dimethoate, BaP and BPA were reduced after physical exercises. However, the elimination of BaP in male was higher than that in female but the elimination of BPA in female was higher than that in male. Multivariate logistic regression showed that the degree of heart rate (HR) change was a protective factor affecting the improvement effect of dimethoate, BaP and BPA while BMI (body mass index) was a risk factor. Nevertheless, sex was a risk factor affecting the improvement of dimethoate and BaP but had a lower efficacy on BPA improvement.

CONCLUSION

The present findings indicate that physical exercises can be considered as a novel approach to eliminate pollutants level in human body and can also give suggestions for choosing specific physical exercises to male and female individuals. Moreover, those who are with higher BMI need to lose weight before eliminating pollutant level through physical exercises.

Biocatalytic membranes for combating the challenges of membrane fouling and micropollutants in water purification: A review

Over the last few years, the list of water contaminants has grown tremendously due to many anthropogenic activities. Various conventional technologies are available for water and wastewater treatment. However, micropollutants of emerging concern (MEC) are posing a great threat due to their activity at trace concentration and poor removal efficiency by the conventional treatment processes. Advanced technology like membrane technology can remove MEC to some extent. However, issues like the different chemical properties of MEC, selectivity, and fouling of membranes can affect the removal efficiency. Moreover, the concentrate from the membrane filtration may need further treatment. Enzymatic degradation of pollutants and foulants is one of the green approaches for removing various contaminants from the water as well as mitigating membrane fouling. Biocatalytic membranes (BCMs), in which enzymes are immobilized on membranes, combines the advantages of membrane separation and enzymatic degradation. This review article discussed various commonly used enzymes in BCMs for removing MEC and fouling. The majorly used enzymes were oxidoreductases and hydrolases for removing MEC, antifouling, and self-cleaning ability. The various BCM synthesis processes based on entrapment, crosslinking, and binding have been summarized, along with the effects of the addition of the nanoparticles on the performances of the BCMs. The scale-up, commercial viability, challenges, and future direction for improving BCMs have been discussed and shown bright possibilities for these new generation membranes.