Quantification of Carbon Nanotubes in Environmental Matrices: Current Capabilities, Case Studies, and Future Prospects

Ultra-high performance concrete alleviates ecotoxicological effects in aquatic organisms

With the advancement of cementitious material technologies, ultra-high performance concretes incorporating nano- and(or) micro-sized particle materials have been developed; however, their environmental risks are still poorly understood. This study investigates the ecotoxicological effects of ultra-high performance concrete (UC) leachate by comparing with that of the conventional concrete (CC) leachate. For this purpose, a dynamic leaching test and a battery test with algae, water flea, and zebrafish were performed using standardized protocols. The conductivity, concentration of inorganic elements (Al, K, Na, and Fe), and total organic concentration were lower in the UC leachate than in the CC leachate. The EC50 values of the CC and UC leachates were 44.9 % and >100 % in algae, and 8.0 % and 63.1 % in water flea, respectively. All zebrafish exposed to the CC and UC leachates survived. A comprehensive evaluation of the ecotoxicity of the CC and UC leachate based on the toxicity classification system (TCS) showed that their toxicity classification was "highly acute toxicity" and "acute toxicity", respectively. Based on the hazard quotient and principal component analysis, Al and(or) K could be significant factors determining the ecotoxicity of concrete leachate. Furthermore, the ecotoxicity of UC could not be attributed to the use of silica-based materials or multi-wall carbon nanotubes. This study is the first of its kind on the ecotoxicity of UC leachate in aquatic environments, and the results of this study can be used to develop environment-friendly UC.

Analysis of carbon nanotube levels in organic matter: an inter-laboratory comparison to determine best practice

Carbon nanotubes (CNTs) are increasingly being used in industrial applications, but their toxicological data in animals and humans are still sparse. To assess the toxicological dose-response of CNTs and to evaluate their pulmonary biopersistence, their quantification in tissues, especially lungs, is crucial. There are currently no reference methods or reference materials for low levels of CNTs in organic matter. Among existing analytical methods, few have been fully and properly validated. To remedy this, we undertook an inter-laboratory comparison on samples of freeze-dried pig lung, ground and doped with CNTs. Eight laboratories were enrolled to analyze 3 types of CNTs at 2 concentration levels each in this organic matrix. Associated with the different analysis techniques used (specific to each laboratory), sample preparation may or may not have involved prior digestion of the matrix, depending on the analysis technique and the material being analyzed. Overall, even challenging, laboratories' ability to quantify CNT levels in organic matter is demonstrated. However, CNT quantification is often overestimated. Trueness analysis identified effective methods, but systematic errors persisted for some. Choosing the assigned value proved complex. Indirect analysis methods, despite added steps, outperform direct methods. The study emphasizes the need for reference materials, enhanced precision, and organized comparisons.

An informative short-term study on the impacts of a triclocarban/weathered multi-walled carbon nanotube-adsorbed complex to benthic organisms

Freshwater organisms are suitable models to study the fate of environmental pollutants. Due to their versatile and everyday use, many environmental pollutants such as triclocarban (TCC) or multi-walled carbon nanotubes (MWCNTs) enter environmental compartments very easily. TCC is known as a disinfectant and is declared as a highly aquatic toxicant. Multi-walled carbon nanotubes are used, e.g., in the automotive industry to improve plastic properties. Both TCCs and MWCNTs can pose major pollution hazards to various organisms. In addition, these substances can bind to each other due to their tendency to interact via strong hydrophobic interactions. Therefore, a short-term test was conducted to investigate the effects of the individual chemicals TCC and weathered MWCNTs (wMWCNTs) on a benthic biofilm and a grazing organism, Lymnaea stagnalis. Furthermore, the two compounds were coupled by an adsorption experiment resulting in a coupled complex formation (TCC + wMWCNTs). L. stagnalis showed no effects in terms of mortality. For benthic biofilm, the coupling test (TCC + wMWCNTs) showed a decrease of 58% in chlorophyll a (Chl-a) concentration. The main effect could be attributed to the wMWCNTs' exposure alone (decrease of 82%), but not to presence of TCC. The concentration range of Chl-a upon TCC exposure alone was comparable to that in the control group (32 and 37 µg/cm2). With respect to the particulate organic carbon (POC) concentration, very similar results were found for the solvent control, the TCC, and also for the TCC + wMWCNTs group (3, 2.9, and 2.9 mg/cm2). In contrast to the control, a significant increase in POC concentration (100%) was observed for wMWCNTs, but no synergistic effect of TCC + wMWCNTs was detected.

Carbon nanotubes and nanofibers seen as emerging threat to fish: Historical review and trends

Since the discovery of the third allotropic carbon form, carbon-based one-dimensional nanomaterials (1D-CNMs) became an attractive and new technology with different applications that range from electronics to biomedical and environmental technologies. Despite their broad application, data on environmental risks remain limited. Fish are widely used in ecotoxicological studies and biomonitoring programs. Thus, the aim of the current study was to summarize and critically analyze the literature focused on investigating the bioaccumulation and ecotoxicological impacts of 1D-CNMs (carbon nanotubes and nanofibers) on different fish species. In total, 93 articles were summarized and analyzed by taking into consideration the following aspects: bioaccumulation, trophic transfer, genotoxicity, mutagenicity, organ-specific toxicity, oxidative stress, neurotoxicity and behavioral changes. Results have evidenced that the analyzed studies were mainly carried out with multi-walled carbon nanotubes, which were followed by single-walled nanotubes and nanofibers. Zebrafish (Danio rerio) was the main fish species used as model system. CNMs' ecotoxicity in fish depends on their physicochemical features, functionalization, experimental design (e.g. exposure time, concentration, exposure type), as well as on fish species and developmental stage. CNMs' action mechanism and toxicity in fish are associated with oxidative stress, genotoxicity, hepatotoxicity and cardiotoxicity. Overall, fish are a suitable model system to assess the ecotoxicity of, and the environmental risk posed by, CNMs.

Functionalised Carbon Nanotubes: Promising Drug Delivery Vehicles for Neurovascular Disorder Intervention

Neurovascular diseases are linked to the brain's blood vessels. These disorders are complicated to treat due to the strict selective characteristics of the blood-brain barrier. Consequently, the potency of the pharmacological treatments for these conditions is immensely diminished, leading to a rise in neurovascular-associated morbidity and mortality. Carbon nanotubes are regarded as essential nanoparticles with a promise of treating neurovascular disorders. Current findings have demonstrated the effectiveness of carbon nanotubes as vehicles for ferrying drugs to the site of interest. This review accentuates the theoretical utilisation of carbon nanotubes as drug nanocarriers equipped with the penetrating capability to the blood-brain barrier for treating neurovascular disorders such as ischemic stroke. The success of the carbon nanotube system may result in the development of a new and highly relevant drug delivery procedure. This review will also cover carbon nanotube functionalisation for applications in the biomedical fields, toxicity, in vitro and in vivo drugs and biomolecule delivery, and the future outlook of carbon nanotubes.

Quantitative evaluation of released nanomaterials from carbon nanotube epoxy nanocomposites during environmental exposure and mechanical treatment

Carbon nanotubes (CNTs) are promising nanomaterials exhibiting high thermal and electrical conductivities, significant stiffness, and high tensile strength. As a result, CNTs have been utilized as additives to enhance properties of various polymeric materials in a broad range of fields. In this study, we investigated the release of CNTs from CNT epoxy nanocomposites exposed to environmental weathering and mechanical stresses. The presence and amount of CNTs released from degraded polymer nanocomposites is important because CNTs can impact physiological systems in humans and environmental organisms. The weathering experiments in this study included nanocomposite exposure to both UV and a water spray, to simulate sunlight and rain exposure, whereas mechanical stresses were induced by shaking and ultrasonication. CNT release from epoxy nanocomposites was quantified by a 14C-labeling method that enabled measurement of the CNT release rates after different weathering and mechanical treatments. In this study, a sample oxidizer was used prior to liquid scintillation counting, because it was shown to reduce interferences from the presence of polymeric materials and achieve a high recovery (95%). Polymer nanocomposite degradation was confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), and light microscopy. A continuous release of 14C-labeled nanomaterials was observed after each UV and simulated rain exposure period, with 0.23% (mass/mass) of the total embedded mass of CNTs being released from the CNT nanocomposite during the full weathering process, suggesting that the water spray induced sufficient mechanical stress to eliminate the protective effect of the surface agglomerated CNT network. Importantly, additional mechanical stresses imposed on the weathered nanocomposites by shaking and ultrasonication resulted in further release of approximately 0.27% (mass /mass).

Selective Removal of Organic Pollutants in Groundwater and Surface Water by Persulfate-Assisted Advanced Oxidation: The Role of Electron-Donating Capacity

The efficiency of persulfate-assisted advanced oxidation processes (PS-AOPs) in degrading organic pollutants is affected by the electron-donating capability of organic substances present in the water source. In this study, we systematically investigate the electron-donating capacity (EDC) difference between groundwater and surface water and demonstrate the dependence of removal efficiency on the EDC of target water by PS-AOPs with carbon nanotubes (CNTs) as a catalyst. Laboratory analyses and field experiments reveal that the CNT/PS system exhibits higher performance in organic pollutant removal in groundwater with a high concentration of phenols, compared to surface water, which is rich in quinones. We attribute this disparity to the selective electron transfer pathway induced by potential difference between PS-CNT and organic substance-CNT intermediates, which preferentially degrade organic substances with stronger electron-donating capability. This study provides valuable insights into the inherent selective removal mechanism and application scenarios of electron transfer process-dominated PS-AOPs for water treatment based on the electron-donating capacity of organic pollutants.

Environmental safety of nanotechnologies: The eco-design of manufactured nanomaterials for environmental remediation

Nanosafety is paramount considering the risks associated with manufactured nanomaterials (MNMs) whose implications could outweigh their advantages for environmental applications. Although nanotechnology-based solutions to implement pollution control, remediation and prevention are incremental with clear benefits for public health and Earth' natural ecosystems, nanoremediation is having a setback due to the risks associated with the safety of MNMs for humans and the environment. MNMs are diverse, work differently and bionano-interactions occurring upon environmental exposure will guide their fate and hazardous outcomes. Here we propose a new ecologically-based design strategy (eco-design) having its roots in green nanoscience and LCA that will ground on an Ecological Risk Assessment approach, which introduces the evaluation of MNMs' ecotoxicity along with their performances and efficacies at the design stage. As such, the proposed eco-design strategy will allow recognition and design-out since the very beginning of material synthesis, those hazardous peculiar features that can be hazardous to living beings and the natural environment. A more ecologically sound eco-design strategy in which nanosafety is conceptually included in MNMs design will sustain safer nanotechnologies including those for the environment as remediation by leveraging any risks for humans and natural ecosystems.

Evaluation of bioaccumulation of nanoplastics, carbon nanotubes, fullerenes, and graphene family materials

Bioaccumulation is a key factor in understanding the potential ecotoxicity of substances. While there are well-developed models and methods to evaluate bioaccumulation of dissolved organic and inorganic substances, it is substantially more challenging to assess bioaccumulation of particulate contaminants such as engineered carbon nanomaterials (CNMs; carbon nanotubes (CNTs), graphene family nanomaterials (GFNs), and fullerenes) and nanoplastics. In this study, the methods used to evaluate bioaccumulation of different CNMs and nanoplastics are critically reviewed. In plant studies, uptake of CNMs and nanoplastics into the roots and stems was observed. For multicellular organisms other than plants, absorbance across epithelial surfaces was typically limited. Biomagnification was not observed for CNTs and GFNs but were observed for nanoplastics in some studies. However, the reported absorption in many nanoplastic studies may be a consequence of an experimental artifact, namely release of the fluorescent probe from the plastic particles and subsequent uptake. We identify that additional work is needed to develop analytical methods to provide robust, orthogonal methods that can measure unlabeled (e.g., without isotopic or fluorescent labels) CNMs and nanoplastics.

Trophic Transfer of Single-Walled Carbon Nanotubes at the Base of the Food Chain and Toxicological Response

The potential for trophic transfer of single-walled carbon nanotubes (SWCNTs) was assessed using the green algae Tetraselmis suecica and the blue mussel Mytilus edulis in a series of laboratory experiments. Swanee River Natural Organic Matter (SRNOM)-dispersed SWCNTs were introduced into growing algal cultures. Light microscopical observations, confirmed by scanning electronic microscopy (SEM) and Raman spectroscopy, showed that SWCNT agglomerates adhered to the external algal cell walls and transmission electronic microscopy (TEM) results suggested internalization. A direct effect of SWCNT exposure on the algae was a significant decrease in growth, expressed as chlorophyll a concentration and cell viability. Mussels, fed with algae in the presence of SWCNTs, led to significantly increased pseudofaeces production, indicating selective feeding. Nevertheless, histological sections of the mussel digestive gland following exposure showed evidence of SWCNT-containing algae. Furthermore, DNA damage and oxidative stress biomarker responses in the mussel haemocytes and gill tissue were significantly altered from baseline values and were consistent with previously observed responses to SWCNT exposure. In conclusion, the observed SWCNT-algal interaction demonstrated the potential for SWCNT entrance at the base of the food chain, which may facilitate their trophic transfer with potential consequences for human exposure and health.

Targeting Metal Impurities for the Detection and Quantification of Carbon Black Particles in Water via spICP-MS

Carbon black (CB) is a nanomaterial with numerous industrial applications and high potential for integration into nano-enabled water treatment devices. However, few analytical techniques are capable of measuring CB in water at environmentally relevant concentrations. Therefore, we intended to establish a quantification method for CB with lower detection limits through utilization of trace metal impurities as analytical tracers. Various metal impurities were investigated in six commercial CB materials, and the Monarch 1000 CB was chosen as a model for further testing. The La impurity was chosen as a tracer for spICP-MS analysis based on measured concentration, low detection limits, and lack of polyatomic interferences. CB stability in water and adhesion to the spICP-MS introduction system presented a challenge that was mitigated by the addition of a nonionic surfactant to the matrix. Following optimization, the limit of detection (64 μg/L) and quantification (122 μg/L) for Monarch 1000 CB demonstrated the applicability of this approach to samples expected to contain trace amounts of CB. When compared against gravimetric analysis and UV-visible absorption spectroscopy, spICP-MS quantification exhibited similar sensitivity but with the ability to detect concentrations an order of magnitude lower. Method detection and sensitivity was unaffected when dissolved La was spiked into CB samples at environmentally relevant concentrations. Additionally, a more complex synthetic matrix representative of drinking water caused no appreciable impact to CB quantification. In comparison to existing quantification techniques, this method has achieved competitive sensitivity, a wide working range for quantification, and high selectivity for tracing possible release of CB materials with known metal contents.

Current Methods and Prospects for Analysis and Characterization of Nanomaterials in the Environment

Analysis and characterization of naturally occurring and engineered nanomaterials in the environment are critical for understanding their environmental behaviors and defining real exposure scenarios for environmental risk assessment. However, this is challenging primarily due to the low concentration, structural heterogeneity, and dynamic transformation of nanomaterials in complex environmental matrices. In this critical review, we first summarize sample pretreatment methods developed for separation and preconcentration of nanomaterials from environmental samples, including natural waters, wastewater, soils, sediments, and biological media. Then, we review the state-of-the-art microscopic, spectroscopic, mass spectrometric, electrochemical, and size-fractionation methods for determination of mass and number abundance, as well as the morphological, compositional, and structural properties of nanomaterials, with discussion on their advantages and limitations. Despite recent advances in detecting and characterizing nanomaterials in the environment, challenges remain to improve the analytical sensitivity and resolution and to expand the method applications. It is important to develop methods for simultaneous determination of multifaceted nanomaterial properties for in situ analysis and characterization of nanomaterials under dynamic environmental conditions and for detection of nanoscale contaminants of emerging concern (e.g., nanoplastics and biological nanoparticles), which will greatly facilitate the standardization of nanomaterial analysis and characterization methods for environmental samples.

In vitro toxicity of carbon nanotubes: a systematic review

Carbon nanotube (CNT) toxicity-related issues provoke many debates in the scientific community. The controversial and disputable data about toxicity doses, proposed hazard effects, and human health concerns significantly restrict CNT applications in biomedical studies, laboratory practices, and industry, creating a barrier for mankind in the way of understanding how exactly the material behaves in contact with living systems. Raising the toxicity question again, many research groups conclude low toxicity of the material and its potential safeness at some doses for contact with biological systems. To get new momentum for researchers working on the intersection of the biological field and nanomaterials, i.e., CNT materials, we systematically reviewed existing studies with in vitro toxicological data to propose exact doses that yield toxic effects, summarize studied cell types for a more thorough comparison, the impact of incubation time, and applied toxicity tests. Using several criteria and different scientific databases, we identified and analyzed nearly 200 original publications forming a "golden core" of the field to propose safe doses of the material based on a statistical analysis of retrieved data. We also differentiated the impact of various forms of CNTs: on a substrate and in the form of dispersion because in both cases, some studies demonstrated good biocompatibility of CNTs. We revealed that CNTs located on a substrate had negligible impact, i.e., 90% of studies report good viability and cell behavior similar to control, therefore CNTs could be considered as a prospective conductive substrate for cell cultivation. In the case of dispersions, our analysis revealed mean values of dose/incubation time to be 4-5 μg mL-1 h-1, which suggested the material to be a suitable candidate for further studies to get a more in-depth understanding of its properties in biointerfaces and offer CNTs as a promising platform for fundamental studies in targeted drug delivery, chemotherapy, tissue engineering, biosensing fields, etc. We hope that the present systematic review will shed light on the current knowledge about CNT toxicity, indicate "dark" spots and offer possible directions for the subsequent studies based on the demonstrated here tabulated and statistical data of doses, cell models, toxicity tests, viability, etc.

IVIVE: Facilitating the Use of In Vitro Toxicity Data in Risk Assessment and Decision Making

During the past few decades, the science of toxicology has been undergoing a transformation from observational to predictive science. New approach methodologies (NAMs), including in vitro assays, in silico models, read-across, and in vitro to in vivo extrapolation (IVIVE), are being developed to reduce, refine, or replace whole animal testing, encouraging the judicious use of time and resources. Some of these methods have advanced past the exploratory research stage and are beginning to gain acceptance for the risk assessment of chemicals. A review of the recent literature reveals a burst of IVIVE publications over the past decade. In this review, we propose operational definitions for IVIVE, present literature examples for several common toxicity endpoints, and highlight their implications in decision-making processes across various federal agencies, as well as international organizations, including those in the European Union (EU). The current challenges and future needs are also summarized for IVIVE. In addition to refining and reducing the number of animals in traditional toxicity testing protocols and being used for prioritizing chemical testing, the goal to use IVIVE to facilitate the replacement of animal models can be achieved through their continued evolution and development, including a strategic plan to qualify IVIVE methods for regulatory acceptance.

Multiwalled Carbon Nanotubes Promote Bacterial Conjugative Plasmid Transfer

Multiwalled carbon nanotubes (MWCNTs) regularly enter aquatic environments due to their ubiquity in consumer products and engineering applications. However, the effects of MWCNT pollution on the environmental microbiome are poorly understood. Here, we evaluated whether these carbon nanoparticles can elevate the spread of antimicrobial resistance by promoting bacterial plasmid transfer, which has previously been observed for copper nanomaterials with antimicrobial properties as well as for microplastics. Through a combination of experimental liquid mating assays between Pseudomonas putida donor and recipient strains with plasmid pKJK5::gfpmut3b and mathematical modeling, we here demonstrate that the presence of MWCNTs leads to increased plasmid transfer rates in a concentration-dependent manner. The percentage of transconjugants per recipient significantly increased from 0.21 ± 0.04% in absence to 0.41 ± 0.09% at 10 mg L-1 MWCNTs. Similar trends were observed when using an Escherichia coli donor hosting plasmid pB10. The identified mechanism underlying the observed dynamics was the agglomeration of MWCNTs. A significantly increased number of particles with >6 μm diameter was detected in the presence of MWCNTs, which can in turn provide novel surfaces for bacterial interactions between donor and recipient cells after colonization. Fluorescence microscopy confirmed that MWCNT agglomerates were indeed covered in biofilms that contained donor bacteria as well as elevated numbers of green fluorescent transconjugant cells containing the plasmid. Consequently, MWCNTs provide bacteria with novel surfaces for intense cell-to-cell interactions in biofilms and can promote bacterial plasmid transfer, hence potentially elevating the spread of antimicrobial resistance. IMPORTANCE In recent decades, the use of carbon nanoparticles, especially multiwalled carbon nanotubes (MWCNTs), in a variety of products and engineering applications has been growing exponentially. As a result, MWCNT pollution into environmental compartments has been increasing. We here demonstrate that the exposure to MWCNTs can affect bacterial plasmid transfer rates in aquatic environments, an important process connected to the spread of antimicrobial resistance genes in microbial communities. This is mechanistically explained by the ability of MWCNTs to form bigger agglomerates, hence providing novel surfaces for bacterial interactions. Consequently, increasing pollution with MWCNTs has the potential to elevate the ongoing spread of antimicrobial resistance, a major threat to human health in the 21st century.

U.S. Federal Agency interests and key considerations for new approach methodologies for nanomaterials

Engineered nanomaterials (ENMs) come in a wide array of shapes, sizes, surface coatings, and compositions, and often possess novel or enhanced properties compared to larger sized particles of the same elemental composition. To ensure the safe commercialization of products containing ENMs, it is important to thoroughly understand their potential risks. Given that ENMs can be created in an almost infinite number of variations, it is not feasible to conduct in vivo testing on each type of ENM. Instead, new approach methodologies (NAMs) such as in vitro or in chemico test methods may be needed, given their capacity for higher throughput testing, lower cost, and ability to provide information on toxicological mechanisms. However, the different behaviors of ENMs compared to dissolved chemicals may challenge safety testing of ENMs using NAMs. In this study, member agencies within the Interagency Coordinating Committee on the Validation of Alternative Methods were queried about what types of ENMs are of agency interest and whether there is agency-specific guidance for ENM toxicity testing. To support the ability of NAMs to provide robust results in ENM testing, two key issues in the usage of NAMs, namely dosimetry and interference/bias controls, are thoroughly discussed.

A workflow to investigate the impacts of weathered multi-walled carbon nanotubes to the mud snail Lymnaea stagnalis

Although the development and application of nanomaterials is a growing industry, little data is available on the ecotoxicological effects on aquatic organisms. Therefore, we set up a workflow to address the potential uptake of weathered multi-walled carbon nanotubes (wMWCNTs) by a model organism, the pulmonary mud snail Lymnaea stagnalis (L. stagnalis), which plays an important role in the food web. It represents a suitable organism for this approach because as a grazer it potentially ingests large amounts of sedimented wMWCNTs. As food source for L. stagnalis, benthic biofilm was investigated by the use of a transmission electron microscope (TEM) and a scanning electron microscope (SEM) after exposure with wMWCNTs. In addition, isotopic labeling was applied with ¹⁴C-wMWCNTs (0.1 mg/L) to quantify fate, behavior, and enrichment of ¹⁴C-wMWCNTs in benthic biofilm and in L. stagnalis. Enrichment in benthic biofilm amounted to 529.0 µg wMWCNTs/g dry weight and in L. stagnalis to 79.6 µg wMWCNTs/g dry weight. A bioconcentration factor (BCF) for L. stagnalis was calculated (3500 L/kg). We demonstrate the accumulation of wMWCNTs (10 mg/L) in the digestive tract of L. stagnalis in an effect study. Moreover, the physiological markers glycogen and triglycerides as indicators for the physiological state, as well as the RNA/DNA ratio as growth indicator, were examined. No significant differences between exposed and control animals were analyzed for glycogen and triglycerides after 24 days of exposure, but a decreasing trend is recognizable for triglycerides. In contrast, the significant reduction in the RNA/DNA ratio of L. stagnalis indicated an inhibition of growth with a following recovery after depuration. The described workflow enables a comprehensive determination of the fate and the behavior of wMWCNTs specifically and in general all kinds of CNTs in the aquatic environment and therefore contributes to a holistic risk assessment of wMWCNTs.

The detection and characterization techniques for the interaction between graphene oxide and natural colloids: A review

The high dispersibility of graphene oxide (GO) and the universality of natural colloids (clay minerals, (hydr)oxides of Al, Fe, silica, etc.) make them interact easily. Many kinds of analytical methods have been used to study the interaction between GO and natural colloids. This review provides a comprehensive overview of analytical methods for the detection and quantification of interaction process. We highlighted the influence of the most relevant environmental factors (ionic strength, pH, etc.) on batch experiment, quartz crystal microbalance with dissipation monitoring measurements, and column experiments. Besides, the benefits and drawbacks of spectroscopic, microscopic techniques, theoretical models, calculation and time-resolved dynamic light scattering methods also have discussed in this work. This review can give some guidance to researchers in their selection and combination of the technique for the research of the interaction between GO and natural colloids.

The Impact of Background-Level Carboxylated Single-Walled Carbon Nanotubes (SWCNTs−COOH) on Induced Toxicity in Caenorhabditis elegans and Human Cells

Single-walled carbon nanotubes (SWCNTs) are widely utilized for industrial, biomedical, and environmental purposes. The toxicity of Carboxylated SWCNTs (SWCNTs−COOH) in in vivo models, particularly Caenorhabditis elegans (C. elegans), and in vitro human cells is still unclear. In this study, C. elegans was used to study the effects of SWCNTs−COOH on lethality, lifespan, growth, reproduction, locomotion, reactive oxygen species (ROS) generation, and the antioxidant system. Our data show that exposure to ≥1 μg·L⁻¹ SWCNTs−COOH could induce toxicity in nematodes that affects lifespan, growth, reproduction, and locomotion behavior. Moreover, the exposure of nematodes to SWCNTs−COOH induced ROS generation and the alteration of antioxidant gene expression. SWCNTs−COOH induced nanotoxic effects at low dose of 0.100 or 1.00 μg·L⁻¹, particularly for the expression of antioxidants (SOD-3, CTL-2 and CYP-35A2). Similar nanotoxic effects were found in human cells. A low dose of SWCNTs−COOH induced ROS generation and increased the expression of catalase, MnSOD, CuZnSOD, and SOD-2 mRNA but decreased the expression of GPX-2 and GPX-3 mRNA in human monocytes. These findings reveal that background-level SWCNTs−COOH exerts obvious adverse effects, and C. elegans is a sensitive in vivo model that can be used for the biological evaluation of the toxicity of nanomaterials.

Modern Carbon-Based Materials for Adsorptive Removal of Organic and Inorganic Pollutants from Water and Wastewater

Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Multiple toxicity endpoints induced by carbon nanofibers in Amazon turtle juveniles: Outspreading warns about toxicological risks to reptiles

The toxicity of carbon-based nanomaterials (CNs) has been observed in different organisms; however, little is known about the impact of water polluted with carbon nanofibers (CNFs) on reptiles. Thus, the aim of the current study was to assess the chronic effects (7.5 months) of 1 and 10 mg/L of CNF on Podocnemis expansa (Amazon turtle) juveniles (4 months old) based on different biomarkers. Increased total organic carbon (TOC) concentrations observed in the liver and brain (which suggests CNF uptake) were closely correlated to changes in REDOX systems of turtles exposed to CNFs, mainly to higher nitrite, hydrogen peroxide and lipid peroxidation levels. Increased levels of antioxidants such as total glutathione, catalase and superoxide dismutase in the exposed animals were also observed. The uptake of CNFs and the observed biochemical changes were associated with higher frequency of erythrocyte nuclear abnormalities (assessed through micronucleus assays), as well as with both damage in erythrocyte DNA (assessed through comet assays) and higher apoptosis and necrosis rates in erythrocytes of exposed turtles. Cerebral and hepatic acetylcholinesterase (AChE) increased in turtles exposed to CNFs, and this finding suggested the neurotoxic effect of these nanomaterials. Data in the current study reinforced the toxic potential of CNFs and evidenced the biochemical, mutagenic, genotoxic, cytotoxic, and neurotoxic effects of CNFs on P. expansa.

Identification of hazardous nanoparticles present in the Caribbean Sea for the allocation of future preservation projects

The deposition of remaining nanoparticles in the Caribbean Sea generates the formation of potentially dangerous elements, which influence at the imbalance of ecosystems. The detection of nanoparticles is not simple and the use of conventional methods is difficult application, which is why we highlight the immediacy and importance of this research for the areas of marine biology, urbanism, engineering and geosciences, applied in the Caribbean Sea. The general objective of this study is to evaluate the use of advanced methods for the determination of toxic nanoparticles, which can directly affect the development of marine organisms in the aquatic ecosystem in waters of the Caribbean Sea, favoring the construction of future international public policies with the elaboration of projects capable of mitigating these levels of contamination. The morphology and structure of nanoparticles were analyzed by emission scanning electron microscope with a high-resolution electron microscope. The nanoparticles smaller than 97 nm were identified in different proportions. The morphological analyses indicated nanoparticles' presence in the form of nanotubes, nanospheres, and nanofibers, which were shown in an agglomerated form. The presence of potentially hazardous elements, such as As, Cd, Pb, Mg, Ni and V were verified. In addition, the presence of asbestos in the form of minerals was confirmed, and that of titanium dioxide was found in large quantities. The results provide new data and emphasize the possible consequences to the in the Caribbean Sea, with the identification of dangerous elements (As, Cb, Pb, Hg, Ni and V), harmful to the marine ecosystem. Therefore, there is a need for strict control to reduce contamination of the Caribbean Sea and avoid risks to the ecosystem and public health, through suggestions of international public policies, through constant monitoring and the application of environmental recovery projects in this marine estuary.

Can carbon nanofibers affect anurofauna? Study involving neotropical Physalaemus cuvieri (Fitzinger, 1826) tadpoles

Although carbon nanotubes' (CNTs) toxicity in different experimental systems (in vivo and in vitro) is known, little is known about the toxic effects of carbon nanofibers (CNFs) on aquatic vertebrates. We herein investigated the potential impact of CNFs (1 and 10 mg/L) by using Physalaemus cuvieri tadpoles as experimental model. CNFs were able to induce nutritional deficit in animals after 48-h exposure to them, and this finding was inferred by reductions observed in body concentrations of total soluble carbohydrates, total proteins, and triglycerides. The increased production of hydrogen peroxide, reactive oxygen species and thiobarbituric acid reactive substances in tadpoles exposed to CNFs has suggested REDOX homeostasis change into oxidative stress. This process was correlated to the largest number of apoptotic and necrotic cells in the blood of these animals. On the other hand, the increased superoxide dismutase and catalase activity has suggested that the antioxidant system of animals exposed to CNFs was not enough to maintain REDOX balance. In addition, CNFs induced increase in acetylcholinesterase and butyrylcholinesterase activity, as well as changes in the number of neuromasts evaluated on body surface (which is indicative of the neurotoxic effect of nanomaterials on the assessed model system). To the best of our knowledge, this is the first report on the impact of CNFs on amphibians; therefore, it broadened our understanding about ecotoxicological risks associated with their dispersion in freshwater ecosystems and possible contribution to the decline in the populations of anurofauna species.

Environmentally Induced Changes of Commercial Carbon Nanotubes in Aqueous Suspensions. Adaptive Behavior of Bacteria in Biofilms

The effects of environmental factors such as sunlight irradiation and the presence of humic acid (HA) on the physicochemical properties of commercial multiwall carbon nanotubes (MWCNT) suspended in a simulated inorganic matrix (SIM) and their impacts on bacteria growing in biofilms were evaluated. Both solar irradiation and the presence of HA lead to the dissolution of adsorbed metals on the MWCNT, which are residues of synthesis catalysts. Also, preferential adsorption of certain HA components on the MWCNT induces important modifications in the aliphatic/aromatic relationship of HA components in solution and the generation and release of new moieties. Results demonstrated that the variation of such physicochemical parameters strongly affects the interactions of MWCNT with Pseudomonas aeruginosa sessile bacteria. Thus, the number of attached bacteria increased, and stress responses such as decrease in bacterial size were found in the presence of sunlight-irradiated MWCNT with a particular distribution of extracellular polymeric substances (EPS) strands. A shielding effect was observed when HA was added. It was concluded that physicochemical alterations caused by environmental conditions (with/without irradiation, presence/absence of HA) on MWCNT-containing SIM trigger distinctive adaptive behavior of bacteria in biofilms. This information must be taken into account in the development of biologically assisted treatments for organic metal co-contamination of MWCNT-containing media since MWCNT discharge alters the physicochemical properties and composition of the aqueous environment and the response of the biofilms that interact with it.

Carbon nanofibers are bioaccumulated in Aphylla williamsoni (Odonata) larvae and cause REDOX imbalance and changes of acetylcholinesterase activity

Carbon-based materials have been considered very promising for the technological industry due to their unique physical and chemical properties, namely: ability to reduce production costs and to improve the efficiency of several products. However, there is little information on what is the level of exposure that leads to adverse effects and what kind of effects is expected in aquatic biota. Thus, the aim of the present study was to evaluate the toxicity of carbon nanofibers (CNFs) in dragonfly larvae (Aphylla williamsoni) based on predictive oxidative-stress biomarkers, antioxidant activity reduction and neurotoxicity. After ephemeral models' exposure to CNFs (48 h; at 500 μg/L), data have shown that these pollutants did not change larvae's nutritional status given the concentration of total soluble carbohydrates, total proteins and triglycerides in them. However, the levels of both nitric oxide and substances reactive to thiobarbituric acid (lipid peroxidation indicators) have increased and the antioxidant activity based on total thiol levels and on 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity (%) has reduced, and it suggests REDOX imbalance induction by CNFs. In addition, larvae exposed to these pollutants showed significant acetylcholinesterase activity reduction in comparison to the control group. Thus, the present study has brought further knowledge about how carbon-based materials can affect benthic macroinvertebrates and emphasized their ecotoxicological potential in freshwater environments.

Analysis of Single-Walled Carbon Nanotubes in Estuarine Sediments by Density Gradient Ultracentrifugation Coupled to Near-Infrared Fluorescence Spectroscopy Reveals Disassociation of Residual Metal Catalyst Nanoparticles

The continued growth of the nanotechnology industry and the incorporation of nanomaterials into consumer applications will inevitably lead to their release into environmental systems. Single-walled carbon nanotubes (SWCNTs) in particular have exhibited many attractive optical, mechanical, and electrical properties that lend themselves to new and exciting applications. Assessing their environmental impact upon release into the environment is contingent upon quantifying and characterizing SWCNTs in environmental matrixes. In this study, SWCNTs were isolated from estuarine sediments using density gradient ultracentrifugation (DGU), followed by online flow-through analysis of the density fractions via near-infrared spectroscopy. This approach yielded significant improvements in the quantitative detection limit, from 62 to 1.5 μg g^-1. In addition, fractions of the density gradient were also obtained for further analysis by bulk inductively coupled plasma mass spectrometry (ICP-MS) and single-particle ICP-MS. Using fluorescent, semiconductive SWCNTs, the primary fluorescent nanotube fraction was found to be separated from the sediment matrix during DGU; however, the residual metal catalyst particles that had been assumed to be physically bound to the SWCNTs were found to form a separate band in the density gradient apart from the fluorescent SWCNTs. This result was repeated for a number of SWCNT types regardless of the metal catalyst and synthesis method, with a 0.1 g cm^-3 density difference between most fractions. The apparent disconnect between the fluorescent fraction of SWCNTs and their metal-containing constituents potentially complicates CNT risk assessment as analysis techniques focusing solely on either CNT fluorescence or metal fingerprints may misrepresent exposure concentrations and their toxicological implications.

Quantification of carboxyl-functionalized multiwall carbon nanotubes in plant tissues with programmed thermal analysis

In this study, carboxyl functionalized multiwall carbon nanotubes (c-MWCNTs) in plant (lettuce [Lactuca sativa Bionda Ricciolina]) tissues were quantitatively analyzed with programmed thermal analysis coupled with a sequential digestion. Programmed thermal analysis evidenced a linear relationship between c-MWCNT-bound C and elemental C detected. A detection limit of 114-708 μg C g-1 plant tissues (dry mass) was achieved for analysis of c-MWCNTs. The method was demonstrated using the tissues of lettuce cultured hydroponically for 3 wk with c-MWCNTs at an exposure of 10 and 20 μg ml-1 . This quantitative analysis can be used to provide insights into carbon nanotube exposure through agricultural products and promote its sustainable application.

Quantitative measurement of carbon nanotubes in rat lung

Despite their numerous possible applications, the potential impact of carbon engineered nanomaterials (CEN) on human health, especially after inhalation exposure, is still questioned. Quantification of CEN in the respiratory system is a recurring issue and deposition and pulmonary biopersistence data are essential for toxicological evaluation. In this context, a fully validated standard method for CEN quantification in lung tissue is therefore imperative. The present method, based on the National Institute for Occupational Safety and Health 5040 method for atmospheric elemental and organic carbon analysis as well as on previous developments on biological matrices, involves a simple thermogravimetric analysis (TGA) of lyophilized samples, possibly preceded by a step of chemical digestion of the tissues depending on the nature of CEN investigated. The analytical method was validated for 4 CEN (carbon black as well as 3 long and thick or short and thin carbon nanotubes) for selectivity, linearity, detection and quantification limits, bias, and within-batch and between-batch precision. Calibration curves show linearity in the range of 1-40 mg/g lyophilized lung. Limits of detection for the different CEN range from 6 to 18 µg in 20 mg dry test sample. On average, within-batch precision was kept below 20 and 10% for analysis with or without a prior digestion step, respectively, whereas the corresponding between-batch precision levels reached almost 20 and 15%, respectively. The method was successfully applied to toxicological investigations for the quantitative analysis of CEN contents in rat lung exposed by inhalation.

Rapid and sensitive quantification of cell-associated multi-walled carbon nanotubes

Evaluating nanomaterial uptake and association by cells is relevant for in vitro studies related to safe-by-design approaches, nanomedicine or applications in photothermal therapy. However, standard analytical techniques are time-consuming, involve complex sample preparation or include labelling of the investigated sample system with e.g. fluorescent dyes. Here, we explore lock-in thermography to analyse and compare the association trends of epithelial cells, mesothelial cells, and macrophages exposed to gold nanoparticles and multi-walled carbon nanotubes over 24 h. The presence of nanomaterials in the cells was confirmed by dark field and transmission electron microscopy. The results obtained by lock-in thermography for gold nanoparticles were validated with inductively coupled plasma optical emission spectrometry; with data collected showing a good agreement between both techniques. Furthermore, we demonstrate the detection and quantification of carbon nanotube-cell association in a straightforward, non-destructive, and non-intrusive manner without the need to label the carbon nanotubes. Our results display the first approach in utilizing thermography to assess the carbon nanotube amount in cellular environments.

The Known and Unknown about the Environmental Safety of Nanomaterials in Commerce

The widespread nanomaterial use in commercial products has fed significant concern over environmental health and safety ramifications. Initially, little was known as to how these highly reactive particulates interacted with biological systems. Nanomaterials have introduced complexities not normally considered in traditional safety assessments of chemicals and therefore have generated uncertainty in the reliability of standard tests of safety. Advances in understanding the potential impacts of nanomaterials have occurred since their introduction, particularly for those used in the greatest quantities in commerce. The impact of characteristics such as charge, size, surface functionalization, chemical composition, and certain transformations on the potential effect of nanomaterials in the environment continue to move the field forward. However, generalizations of risk based on any one factor across nanomaterials is not possible. Estimating risk also remains difficult due to the introduction of materials that are new and more complex, minimal information on the specific molecular interactions of nanomaterials and organisms, and the need for more tools for measuring the dynamics of nanomaterial state and fate in complex matrices. Finally, exposure estimates are difficult due to difficulty of environmental monitoring which may be exacerbated by lack of information on nanomaterials in products and new uses in the marketplace.

Toxicity of Single-Walled Carbon Nanotubes (SWCNTs): Effect of Lengths, Functional Groups and Electronic Structures Revealed by a Quantitative Toxicogenomics Assay

Single-walled carbon nanotubes (SWCNTs) are a group of widely used carbon-based nanomaterials (CNMs) with various applications, which raise increasing public concerns associated with their potential toxicological effect and risks on human and ecosystems. In this report, we comprehensively evaluated the nanotoxicity of SWCNTs with their relationship to varying lengths, functional groups and electronic structures, by employing both newly established quantitative toxicogenomics test, as well as conventional phenotypic bioassays. The objective is to reveal potential cellular toxicity and mechanisms of SWCNTs at the molecular level, and to probe their potential relationships with their morphological, surface, and electronic properties. The results indicated that DNA damage and oxidative stress were the dominant mechanisms of action for all SWCNTs and, the toxicity level and characteristics varied with length, surface functionalization and electronic structure. Distinguishable molecular toxicity fingerprints were revealed for the two SWCNTs with varying length, with short SWCNT exhibiting higher toxicity level than the long one. In terms of surface properties, SWCNT functionalization, namely carboxylation and hydroxylation, led to elevated overall toxicity, especially genotoxicity, as compared to unmodified SWCNT. Carboxylated SWCNT induced a greater toxicity than the hydroxylated SWCNT. The nucleus is likely the primary target site for long, short, and carboxylated SWCNTs and mechanical perturbation is likely responsible for the DNA damage, specifically related to degradation of the DNA double helix structure. Finally, dramatically different electronic structure-dependent toxicity was observed with metallic SWCNT exerting much higher toxicity than the semiconducting one that exhibited minimal toxicity among all SWCNTs.

The Sustainability Challenge of Food and Environmental Nanotechnology: Current Status and Imminent Perceptions

Nanotechnology is a connection among various branches of science with potential applications that extend over a variety of scientific disciplines, particularly in the food science and technology fields. For nanomaterial applications in food processing, such as antimicrobials on food contact surfaces along with the improvement of biosensors, electrospun nanofibers are the most intensively studied ones. As in the case of every developing skill, an assessment from a sustainability point of view is necessary to address the balance between its benefits to civilization and the unwanted effects on human health and the environment. The current review aimed to provide an update regarding the sustainability of current nanotechnology applications in food science technology, environment, and public health together with a risk assessment and toxicity evaluation.

Development of methods for extraction and analytical characterization of carbon-based nanomaterials (nanoplastics and carbon nanotubes) in biological and environmental matrices by asymmetrical flow field-flow fractionation

Suitable methods and fit-for-purpose techniques are required to allow characterization of carbon-based nanomaterials (CB-NMs) in complex matrices. In this study, two methods were developed; a method for extraction and characterization of CB-NMs in biological media and a method for fractionation of natural organic matter (NOM) coated CB-NMs in environmental matrices. The former method was developed by extracting carbon nanotubes (CNTs: sized 0.75 × 3000 nm) and nanoplastics (sized 60, 200 and 600 nm) from eggshells and characterizing the extracted CB-NMs in terms of particle size distribution using asymmetrical flow field-flow fractionation (AF4) coupled with multi-angle light scattering (MALS). The latter method was developed using AF4-MALS to fraction NOM-coated CNT (sized 0.75 × 3000 nm) and nanoplastics (sized 60, 200 and 300 nm) in a simulated natural surface water and provide information about the size distribution of the CB-NM-NOM complexes. The developed AF4-MALS method successfully fractioned the CB-NM-NOM complexes based on hydrodynamic size and provided the size distribution of the complexes. The NOM corona did not shift significantly the median size of the CB-NMs. It influenced however the size distribution of the nanoplastics and CNTs. The sample preparation method failed to extract the CNTs (recovery < 20%) from the matrices of the eggshells while being successful for extracting the nanoplastics (recoveries > 60%). The AF4-MALS fractogram showed that the extraction method did not significantly influence the size distribution of the nanoplastics of 60 and 200 nm size, whereas the peak of 600 nm nanoplastics shifted towards a smaller hydrodynamic size. In conclusion, the developed sample preparation method followed by the developed AF4-MALS method can be applied for extraction, separation and characterization of CB-NMs in biological and environmental matrices. Thus, the methods have a high potential to be methods of choice to investigate CB-NMs in future studies.

Multivariate Calibration for Carbon Nanotubes in the Environment Using the Microwave Induced Heating Method

The goal of the present paper is to develop chemometrics-based multivariate calibration approaches for simultaneously determining quantity of individual carbon nanotubes (CNTs) in a multicomponent environmental matrix using a microwave induced heating method. A multifactor and multilevel experiment design was used to create 4 separate calibration datasets. Each calibration dataset contained 25 orthogonal CNTs with 2 or 3 factors (CNTs: single-walled CNTs (SWCNTs)/multi-walled CNTs (MWCNTs)/carboxylated MWCNTs (MWCNT-COOH)) and 5 levels (CNTs mass). The temperature rise (ΔT) spectral information was obtained for each sample by exposing to varying microwave conditions. This study showed the potential and applicability of partial least square regression (PLS), least square-support vector machine (LS-SVM) and artificial neural networks (ANN) in predicting quantities of SWCNTs, MWCNTs and MWCNT-COOH in environmental matrices with microwave induced temperature rises data. Our results revealed that the developed LS-SVM model presented higher R² and lower root mean square error of prediction (RMSEP) (R² = 0.74-0.93, RMSEP =0.0251 mg to 0.0328 mg in 2-component systems and R² = 0.64-0.95, RMSEP = 0.0243 mg to 0.0410 mg in 3-component systems), while the ANN model was only accurate in estimating mass of SWCNT and MWCNT in a 2-component mixture (R² = 0.77-0.89, RMSEP = 0.0322 mg to 0.0503 mg). The PLS model was found not effectively interpret relationship between microwave induced temperature rises data and mass of CNTs, indicated by small R² (0.20-0.87) and large RMSEP (0.0209 mg -0.1021 mg).

Characterization of Nanoparticles: Advances

Over the past two decades, the unique properties of engineered nanoparticles (NPs) have placed them at the centre of revolutionary advancements in many sectors of science, technology and commerce. Multi-technique and multi-disciplinary analytical approaches are required to identify, quantify, and characterize the chemical composition, size and size distribution, surface properties and the number and concentration of NPs. In this chapter, an overview of the recent advances in the characterization of NPs will be presented.

Yttrium Residues in MWCNT Enable Assessment of MWCNT Removal during Wastewater Treatment

Many analytical techniques have limited sensitivity to quantify multi-walled carbon nanotubes (MWCNTs) at environmentally relevant exposure concentrations in wastewaters. We found that trace metals (e.g., Y, Co, Fe) used in MWCNT synthesis correlated with MWCNT concentrations. Because of low background yttrium (Y) concentrations in wastewater, Y was used to track MWCNT removal by wastewater biomass. Transmission electron microscopy (TEM) imaging and dissolution studies indicated that the residual trace metals were strongly embedded within the MWCNTs. For our specific MWCNT, Y concentration in MWCNTs was 76 µg g⁻¹, and single particle mode inductively coupled plasma mass spectrometry (spICP-MS) was shown viable to detect Y-associated MWCNTs. The detection limit of the specific MWCNTs was 0.82 µg L⁻¹ using Y as a surrogate, compared with >100 µg L⁻¹ for other techniques applied for MWCNT quantification in wastewater biomass. MWCNT removal at wastewater treatment plants (WWTPs) was assessed by dosing MWCNTs (100 µg L⁻¹) in water containing a range of biomass concentrations obtained from wastewater return activated sludge (RAS) collected from a local WWTP. Using high volume to surface area reactors (to limit artifacts of MWCNT loss due to adsorption to vessel walls) and adding 5 g L⁻¹ of total suspended solids (TSS) of RAS (3-h mixing) reduced the MWCNT concentrations from 100 µg L⁻¹ to 2 µg L⁻¹. The results provide an environmentally relevant insight into the fate of MWCNTs across their end of life cycle and aid in regulatory permits that require estimates of engineered nanomaterial removal at WWTPs upon accidental release into sewers from manufacturing facilities.

Analytical approaches for characterizing and quantifying engineered nanoparticles in biological matrices from an (eco)toxicological perspective: old challenges, new methods and techniques

To promote the safer by design strategy and assess environmental risks of engineered nanoparticles (ENPs), it is essential to understand the fate of ENPs within organisms. This understanding in living organisms is limited by challenges in characterizing and quantifying ENPs in biological media. Relevant literature in this area is scattered across research from the past decade or so, and it consists mostly of medically oriented studies. This review first introduces those modern techniques and methods that can be used to extract, characterize, and quantify ENPs in biological matrices for (eco)toxicological purposes. It then summarizes recent research developments within those areas most relevant to the context and field that are the subject of this review paper. These comprise numerous in-situ techniques and some ex-situ techniques. The former group includes techniques allowing to observe specimens in their natural hydrated state (e.g., scanning electron microscopy working in cryo mode and high-pressure freezing) and microscopy equipped with elemental microanalysis (e.g., energy-dispersive X-ray spectroscopy); two-photon laser and coherent anti-Stokes Raman scattering microscopy; absorption-edge synchrotron X-ray computed microtomography; and laser ablation-inductively coupled plasma mass spectrometry (LA-ICP-MS). The latter group includes asymmetric flow field flow fractionation coupled with ICP-MS and single particle-ICP-MS. Our review found that most of the evidence gathered for ENPs actually focused on a few metal-based ENPs and carbon nanotube and points to total mass concentration but no other particles properties, such as size and number. Based on the obtained knowledge, we developed and presented a decision scheme and analytical toolbox to help orient scientists toward selecting appropriate ways for investigating the (eco)toxicity of ENPs that are consistent with their properties.

Utilization of Near Infrared Fluorescence Imaging to Track and Quantify the Pulmonary Retention of Single-Walled Carbon Nanotubes in Mice

As nanomaterials are used in a wide array of applications, investigations regarding health impacts associated with inhalation are a concern. Reports show that exposure to single-walled carbon nanotubes (SWCNTs) can induce fibrosis, allergic-type reactions, and pathogen susceptibility. Airway clearance is known to play a primary role in these disease states, yet SWCNT detection in biological systems is challenging. Common techniques, such as electron microscopy, lack spatial resolution and specificity to delineate SWCNTs in carbon-based organisms. Here we validated a near-infrared fluorescence imaging (NIRFI) system to track and semi-quantify SWCNTs over 21 days in tissues of mice exposed intratracheally to 1 dose of SWCNTs. In tandem, we optimized a NIRF-based spectrometry method to quantify SWCNTs, showing that NIRFI was consistent with SWCNT burdens quantified by NIRF spectroscopy in whole lung tissue homogenates. Finally, NIRFI was utilized to localize SWCNTs on lung tissue sections used for pathological analysis. Results revealed that SWCNTs remained in the lung over 21 days and were consistent with alveolar wall restructuring and granuloma formation. This study is the first to quantify SWCNTs in mouse lungs using both semi-quantitative tracking and quantitative mass measurements using NIRF, highlighting this as a sensitive and specific technique for assessing SWCNT clearance in vivo.

Quantification of cellular associated graphene and induced surface receptor responses

The use of graphene for biomedical and other applications involving humans is growing and shows practical promise. However, quantifying the graphitic nanomaterials that interact with cells and assessing any corresponding cellular response is extremely challenging. Here, we report an effective approach to quantify graphene interacting with single cells that utilizes combined multimodal-Raman and photoacoustic spectroscopy. This approach correlates the spectroscopic signature of graphene with the measurement of its mass using a quartz crystal microbalance resonator. Using this technique, we demonstrate single cell noninvasive quantification and multidimensional mapping of graphene with a detection limit of as low as 200 femtograms. Our investigation also revealed previously unseen graphene-induced changes in surface receptor expression in dendritic cells of the immune system. This tool integrates high-sensitivity real-time detection and monitoring of nanoscale materials inside single cells with the measurement of induced simultaneous biological cell responses, providing a powerful method to study the impact of nanomaterials on living systems and as a result, the toxicology of nanoscale materials.

Strategies for robust and accurate experimental approaches to quantify nanomaterial bioaccumulation across a broad range of organisms

One of the key components for environmental risk assessment of engineered nanomaterials (ENMs) is data on bioaccumulation potential. Accurately measuring bioaccumulation can be critical for regulatory decision making regarding material hazard and risk, and for understanding the mechanism of toxicity. This perspective provides expert guidance for performing ENM bioaccumulation measurements across a broad range of test organisms and species. To accomplish this aim, we critically evaluated ENM bioaccumulation within three categories of organisms: single-celled species, multicellular species excluding plants, and multicellular plants. For aqueous exposures of suspended single-celled and small multicellular species, it is critical to perform a robust procedure to separate suspended ENMs and small organisms to avoid overestimating bioaccumulation. For many multicellular organisms, it is essential to differentiate between the ENMs adsorbed to external surfaces or in the digestive tract and the amount absorbed across epithelial tissues. For multicellular plants, key considerations include how exposure route and the role of the rhizosphere may affect the quantitative measurement of uptake, and that the efficiency of washing procedures to remove loosely attached ENMs to the roots is not well understood. Within each organism category, case studies are provided to illustrate key methodological considerations for conducting robust bioaccumulation experiments for different species within each major group. The full scope of ENM bioaccumulation measurements and interpretations are discussed including conducting the organism exposure, separating organisms from the ENMs in the test media after exposure, analytical methods to quantify ENMs in the tissues or cells, and modeling the ENM bioaccumulation results. One key finding to improve bioaccumulation measurements was the critical need for further analytical method development to identify and quantify ENMs in complex matrices. Overall, the discussion, suggestions, and case studies described herein will help improve the robustness of ENM bioaccumulation studies.

Origin and fate of nanoparticles in marine water - Preliminary results

The number, morphology and elemental composition of nanoparticles (<100 nm) in marine water was investigated using Variable Pressure Scanning Electron Microscopy (VP-SEM) and Energy-dispersive X-ray spectroscopy (EDS). Preliminary research conducted in the Baltic Sea showed that the number of nanoparticles in seawater varied from undetectable to 380 (x10²) cm^-3. Wind mixing and density barriers (thermocline) had a significant impact on the abundance and distribution of nanoparticles in water. Many more nanoparticles (mainly nanofibers) were detected in periods of intensive primary production and thermal stratification of water than at the end of the growing season and during periods of strong wind mixing. Temporal and spatial variability of nanoparticles as well as air mass trajectories indicated that the analysed nanofibers were both autochthonous and allochthonous (atmospheric), while the nanospheres were mainly autochthonous. Chemical composition of most of analysed nanoparticles indicates their autochthonous, natural (biogenic/geogenic) origin. Silica nanofibers (probably the remains of flagellates), nanofibers composed of manganese and iron oxides (probably of microbial origin), and pyrite nanospheres (probable formed in anoxic sediments), were all identified in the samples. Only asbestos nanofibers, which were also detected, are probably allochthonous and anthropogenic.

The developmental toxicity, bioaccumulation and distribution of oxidized single walled carbon nanotubes in Artemia salina

With the increasing production and applications of single walled carbon nanotubes (SWCNTs), concerns about the likelihood of SWCNTs being present in the aquatic environment and the subsequent effects on aquatic organisms are emerging. This work aimed to investigate the developmental toxicity, bioaccumulation and distribution of oxidized SWCNTs (O-SWCNTs) in a marine model organism, Artemia salina (A. salina). The results indicated that the hatching rates of capsulated and decapsulated cysts were decreased as the O-SWCNT concentration increased from 0 to 600 mg L-1 at 12, 18, 24 and 36 h. For instar I, II and III larvae exposure to 600 mg L-1, the mean mortality rates were 36.1%, 57.9% and 45.2%, respectively. Both the body length and swimming speed showed a concentration-dependent decrease after exposure to O-SWCNTs for 24 h. The inhibition of swimming may be caused by (1) the malformation of gills; (2) the attachment of O-SWCNTs on the gills. Reactive oxygen species (ROS) and antioxidant enzyme (catalase, superoxide dismutase and glutathione peroxidase) activities substantially increased following exposure, indicating that the toxic effects were related to oxidative stress. O-SWCNTs can be ingested, accumulated and excreted by A. salina, and distributed in the intestine, lipid vesicles and phagocytes. However, the accumulated O-SWCNTs were not completely excreted by A. salina. Uptake kinetics data showed that the O-SWCNT content increased from 1 to 48 h followed by a decrease from 48 to 72 h in the range from 0.08 to 5.7 mg g-1. The combined results so far indicate that O-SWCNTs have the potential to affect aquatic organisms when released into the marine ecosystems.

Environmentally Sustainable and Ecosafe Polysaccharide-Based Materials for Water Nano-Treatment: An Eco-Design Study

Nanoremediation, which is the use of nanoparticles and nanomaterials for environmental remediation, is widely explored and proposed for preservation of ecosystems that suffer from the increase in human population, pollution, and urbanization. We herein report a critical analysis of nanotechnologies for water remediation by assessing their sustainability in terms of efficient removal of pollutants, appropriate methods for monitoring their effectiveness, and protocols for the evaluation of any potential environmental risks. Our purpose is to furnish fruitful guidelines for sustainable water management, able to promote nanoremediation also at European level. In this context, we describe new nanostructured polysaccharide-based materials obtained from renewable resources as alternative efficient and ecosafe solutions for water nano-treatment. We also provide eco-design indications to improve the sustainability of the production of these materials, based on life-cycle assessment methodology.

Efficient electrochemical degradation of multiwall carbon nanotubes

As the production mass of multiwall carbon nanotubes (MWCNT) increases, the potential for human and environmental exposure to MWCNTs may also increase. We have shown that exposing an aqueous suspension of pristine MWCNTs to an intense oxidative treatment in an electrochemical reactor, equipped with an efficient hydroxyl radical generating Boron Doped Diamond (BDD) anode, leads to their almost complete mineralization. Thermal optical transmittance analysis showed a total carbon mass loss of over two orders of magnitude due to the electrochemical treatment, a result consistent with measurements of the degraded MWCNT suspensions using UV-vis absorbance. Liquid chromatography data excludes substantial accumulation of the low molecular weight reaction products. Therefore, up to 99% of the initially suspended MWCNT mass is completely mineralized into gaseous products such as CO₂ and volatile organic carbon. Scanning electron microscopy (SEM) images show sporadic opaque carbon clusters suggesting the remaining nanotubes are transformed into structure-less carbon during their electrochemical mineralization. Environmental toxicity of pristine and degraded MWCNTs was assessed using Caenorhabditis elegans nematodes and revealed a major reduction in the MWCNT toxicity after treatment in the electrochemical flow-by reactor.

Assessment of Effects of the Long-Term Exposure of Agricultural Crops to Carbon Nanotubes

Carbon-based nanoparticles (CBNs) are nanomaterials that have been shown to be plant growth regulators. Here, we investigated the effects of long-term exposure to multi-walled carbon nanotubes (MWCNTs) on the growth of three important crops (barley, soybean, and corn). The tested species were cultivated in hydroponics supplemented with 50 μg/mL MWCNTs. After 20 weeks of continuous exposure to the nanomaterials, no significant toxic effects on plant development were observed. Several positive phenotypical changes were recorded, in addition to the enhancement of photosynthesis in MWCNT-exposed crops. Raman spectroscopy with point-by-point mapping proved that the MWCNTs in the hydroponic solution moved into all tested species and were distributed in analyzed organs (leaves, stems, roots, and seeds). Our results confirmed the significant potential of CBN in plant agriculture. However, the documented presence of MWCNTs in different organs of all exposed crops highlighted the importance of detailed risk assessment of nanocontaminated plants moving into the food chain.

Carbonaceous Nanomaterials Have Higher Effects on Soybean Rhizosphere Prokaryotic Communities During the Reproductive Growth Phase than During Vegetative Growth

Carbonaceous nanomaterials (CNMs) can affect agricultural soil prokaryotic communities, but how the effects vary with the crop growth stage is unknown. To investigate this, soybean plants were cultivated in soils amended with 0, 0.1, 100, or 1000 mg kg-1 of carbon black, multiwalled carbon nanotubes (MWCNTs), or graphene. Soil prokaryotic communities were analyzed by Illumina sequencing at day 0 and at the soybean vegetative and reproductive stages. The sequencing data were functionally annotated using the functional annotation of prokaryotic taxa (FAPROTAX) database. The prokaryotic communities were unaffected at day 0 and were altered at the plant vegetative stage only by 0.1 mg kg-1 MWCNTs. However, at the reproductive stage, when pods were filling, most treatments (except 1000 mg kg-1 MWCNTs) altered the prokaryotic community composition, including functional groups associated with C, N, and S cycling. The lower doses of CNMs, which were previously shown to be less agglomerated and thus more bioavailable in soil relative to the higher doses, were more effective toward both overall communities and individual functional groups. Taken together, prokaryotic communities in the soybean rhizosphere can be significantly phylogenetically and functionally altered in response to bioavailable CNMs, especially when soybean plants are actively directing resources to seed production.

Characterization and toxicity of nanoscale fragments in wastewater treatment plant effluent

Much attention has been paid to extracting and isolating specific and well-known nanoparticles (especially for engineered nanomaterials) from complex environmental matrices. However, such research may not provide global information on actual contamination because nanoscale fragments exist as mixtures of various elements and matrices in the real environment. The present work first isolated and characterized nanoscale fragments in effluents from municipal wastewater treatment plants (WWTPs). The nanoscale fragments were found to be composed of 70-85% carbon and low amounts of oxygen, heavy metals and other elements and exhibited nanosheet topographies (approximately 0.87-1.31 nm thickness and 68-187 nm lateral length). Because the isolated nanoscale fragments were mixtures rather than one specific type of nanoparticle, they were present at high concentrations ranging from 0.07 to 0.55 mg/L. It was also found that the accumulation of nanoscale fragments in rice reached 0.59 mg/g under exposure to environmentally relevant concentrations, leading to marked phytotoxicity (e.g., ultrastructural damage to chloroplasts and mitochondria). Metabolic analysis revealed the toxicological mechanisms to be related to disorders of carbohydrate, amino acid and fatty acid metabolism. This study is the first to characterize the properties and analyze the toxicity of nanoscale fragments in the effluents of WWTPs. Given that WWTP effluents containing nanoscale fragments are continuously discharged to the soil, surface water and seas, nanoscale fragment materials deserve considerable attention in future work compared with the few widely studied engineered nanoparticles.

Detection and Quantification of Graphene-Family Nanomaterials in the Environment

An increase in production of commercial products containing graphene-family nanomaterials (GFNs) has led to concern over their release into the environment. The fate and potential ecotoxicological effects of GFNs in the environment are currently unclear, partially due to the limited analytical methods for GFN measurements. In this review, the unique properties of GFNs that are useful for their detection and quantification are discussed. The capacity of several classes of techniques to identify and/or quantify GFNs in different environmental matrices (water, soil, sediment, and organisms), after environmental transformations, and after release from a polymer matrix of a product is evaluated. Extraction and strategies to combine methods for more accurate discrimination of GFNs from environmental interferences as well as from other carbonaceous nanomaterials are recommended. Overall, a comprehensive review of the techniques available to detect and quantify GFNs are systematically presented to inform the state of the science, guide researchers in their selection of the best technique for the system under investigation, and enable further development of GFN metrology in environmental matrices. Two case studies are described to provide practical examples of choosing which techniques to utilize for detection or quantification of GFNs in specific scenarios. Because the available quantitative techniques are somewhat limited, more research is required to distinguish GFNs from other carbonaceous materials and improve the accuracy and detection limits of GFNs at more environmentally relevant concentrations.