1
|
Pandey R, Pinon V, Garren M, Maffe P, Mondal A, Brisbois EJ, Handa H. N-Acetyl Cysteine-Decorated Nitric Oxide-Releasing Interface for Biomedical Applications. ACS Appl Mater Interfaces 2024. [PMID: 38693878 DOI: 10.1021/acsami.4c02369] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2024]
Abstract
Biomedical devices are vulnerable to infections and biofilm formation, leading to extended hospital stays, high expenditure, and increased mortality. Infections are clinically treated via the administration of systemic antibiotics, leading to the development of antibiotic resistance. A multimechanistic strategy is needed to design an effective biomaterial with broad-spectrum antibacterial potential. Recent approaches have investigated the fabrication of innately antimicrobial biomedical device surfaces in the hope of making the antibiotic treatment obsolete. Herein, we report a novel fabrication strategy combining antibacterial nitric oxide (NO) with an antibiofilm agent N-acetyl cysteine (NAC) on a polyvinyl chloride surface using polycationic polyethylenimine (PEI) as a linker. The designed biomaterial could release NO for at least 7 days with minimal NO donor leaching under physiological conditions. The proposed surface technology significantly reduced the viability of Gram-negative Escherichia coli (>97%) and Gram-positive Staphylococcus aureus (>99%) bacteria in both adhered and planktonic forms in a 24 h antibacterial assay. The composites also exhibited a significant reduction in biomass and extra polymeric substance accumulation in a dynamic environment over 72 h. Overall, these results indicate that the proposed combination of the NO donor with mucolytic NAC on a polymer surface efficiently resists microbial adhesion and can be used to prevent device-associated biofilm formation.
Collapse
Affiliation(s)
- Rashmi Pandey
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Vicente Pinon
- Pharmaceutical and Biomedical Science Department, College of Pharmacy, University of Georgia, Athens, Georgia 30602, United States
| | - Mark Garren
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Patrick Maffe
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Arnab Mondal
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Elizabeth J Brisbois
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
| | - Hitesh Handa
- School of Chemical, Materials, and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
- Pharmaceutical and Biomedical Science Department, College of Pharmacy, University of Georgia, Athens, Georgia 30602, United States
| |
Collapse
|
2
|
Fattahi N, Gorgannezhad L, Masoule SF, Babanejad N, Ramazani A, Raoufi M, Sharifikolouei E, Foroumadi A, Khoobi M. PEI-based functional materials: Fabrication techniques, properties, and biomedical applications. Adv Colloid Interface Sci 2024; 325:103119. [PMID: 38447243 DOI: 10.1016/j.cis.2024.103119] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/29/2023] [Revised: 01/15/2024] [Accepted: 02/22/2024] [Indexed: 03/08/2024]
Abstract
Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.
Collapse
Affiliation(s)
- Nadia Fattahi
- Drug Design and Development Research Center, The Institute of Pharmaceutical Sciences (TIPS), Tehran University of Medical Sciences, Tehran 1417614411, Iran; Department of Chemistry, Faculty of Science, University of Zanjan, Zanjan 45371-38791, Iran
| | - Lena Gorgannezhad
- Queensland Micro- and Nanotechnology Centre, Nathan Campus, Griffith University, 170 Kessels Road, Brisbane, QLD 4111, Australia
| | - Shabnam Farkhonde Masoule
- Drug Design and Development Research Center, The Institute of Pharmaceutical Sciences (TIPS), Tehran University of Medical Sciences, Tehran 1417614411, Iran
| | - Niloofar Babanejad
- College of Pharmacy, Nova Southeastern University, Fort Lauderdale, FL, USA
| | - Ali Ramazani
- Department of Chemistry, Faculty of Science, University of Zanjan, Zanjan 45371-38791, Iran.
| | - Mohammad Raoufi
- Nanotechnology Research Center, Faculty of Pharmacy, Tehran University of Medical Sciences, Tehran 13169-43551, Iran
| | - Elham Sharifikolouei
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca Degli Abruzzi 24, 10129, Turin (TO), Italy
| | - Alireza Foroumadi
- Drug Design and Development Research Center, The Institute of Pharmaceutical Sciences (TIPS), Tehran University of Medical Sciences, Tehran 1417614411, Iran; Department of Medicinal Chemistry, Faculty of Pharmacy, Tehran University of Medical Science, Tehran, Iran
| | - Mehdi Khoobi
- Drug Design and Development Research Center, The Institute of Pharmaceutical Sciences (TIPS), Tehran University of Medical Sciences, Tehran 1417614411, Iran; Department of Radiopharmacy, Faculty of Pharmacy, Tehran University of Medical Sciences, Tehran, Iran.
| |
Collapse
|
3
|
Shangguan J, Wu Z, Qiao C, Zhang Y, Li L, Li Q, Gao Y, Yan H, Liu W. Enhanced Antibacterial Activity against Escherichia coli Based on Cationic Carbon Dots Assembling with 5-Aminolevulinic Acid. ACS Omega 2024; 9:7034-7042. [PMID: 38371755 PMCID: PMC10870354 DOI: 10.1021/acsomega.3c08914] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/09/2023] [Revised: 01/03/2024] [Accepted: 01/15/2024] [Indexed: 02/20/2024]
Abstract
Carbon dots (CDs) with positive surface charges are considered one of the encouraging nanomedications for antibacterial applications. However, due to the distinctive membrane structure of Gram-negative bacteria, cationic CDs with relatively high concentrations are usually required for effective treatment, which might bring out serious safety issues at high doses. Therefore, it is of substantial significance to improve the killing efficiency of cationic CDs on Gram-negative bacteria at appropriately low concentrations. In this work, optimized cationic CDs (bPEI25 000-CDs) were prepared via a hydrothermal method with citric acid and branched PEI25000, which offered a positive surface potential, elimination abilities against Escherichia coli, and relatively high biosafety. The optimized bPEI25 000-CDs can further assemble with the clinical photodynamic therapy (PDT) drug 5-aminolevulinic acid (5-ALA) through electrostatic interaction. Moreover, compared with bPEI25 000-CDs and 5-ALA, the bacterial survival rate was significantly reduced by the ALA-bPEI25 000-CD-induced PDT effect. Even when the dose of bPEI25 000-CD carrier was halved, the bacterial survival could be reduced by 44.4% after light exposure compared to those incubated in the dark. The investigation of the bacterial morphology, membrane potential, and intracellular ROS production suggested that the enhanced antibacterial activity may be due to the membrane dysfunction and cell damage resulting from the high interaction between positively charged ALA-bPEI25 000-CDs and the bacterial cell membrane. Meanwhile, the cationic ALA-bPEI25 000-CDs may facilitate the cellular uptake of 5-ALA, resulting in a more efficient PDT effect. In summary, the antibacterial strategy proposed in this study will provide a novel approach for expanding the application of CD-based nanomedications.
Collapse
Affiliation(s)
- Jingfang Shangguan
- School
of Pharmacy, Xinxiang Medical University, Xinxiang, Henan 453003, China
| | - Zhenjing Wu
- School
of Pharmacy, Xinxiang Medical University, Xinxiang, Henan 453003, China
| | - Chengjie Qiao
- School
of Pharmacy, Xinxiang Medical University, Xinxiang, Henan 453003, China
| | - Yuyang Zhang
- School
of Pharmacy, Xinxiang Medical University, Xinxiang, Henan 453003, China
| | - Lin Li
- School
of Pharmacy, Xinxiang Medical University, Xinxiang, Henan 453003, China
| | - Qilu Li
- Key
Laboratory for Yellow River and Huai River Water Environment and Pollution
Control, Ministry of Education, School of
Environment, Henan Normal University, Xinxiang, Henan 453007, China
| | - Yiqiao Gao
- School
of Pharmacy, Xinxiang Medical University, Xinxiang, Henan 453003, China
| | - Huijuan Yan
- School
of Pharmacy, Xinxiang Medical University, Xinxiang, Henan 453003, China
| | - Wei Liu
- School
of Pharmacy, Xinxiang Medical University, Xinxiang, Henan 453003, China
| |
Collapse
|
4
|
Cui T, Fan Y, Liu Y, Fan X, Sun Y, Cheng G, Cheng J. Antibacterial Activity and Mechanism of Self-Assembly Spermidine-Capped Carbon Dots against Staphylococcus aureus. Foods 2023; 13:67. [PMID: 38201095 PMCID: PMC10778379 DOI: 10.3390/foods13010067] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/25/2023] [Revised: 12/19/2023] [Accepted: 12/21/2023] [Indexed: 01/12/2024] Open
Abstract
This paper investigated the antibacterial mechanism of spermidine-capped carbon dots (S-PCDs) against Staphylococcus aureus. The results showed that there were a large number of amino groups on the surface of S-PCDs and they had a high positive charge (+47.06 mV), which could be adsorbed on the negatively charged bacterial surface through electrostatic interaction and changed the permeability of the bacterial cell membrane. The extracellular protein and nucleic acid contents of S. aureus treated with S-PCDs were 5.4 and 1.2 times higher than those of the control group, respectively. The surface folds and defects of the bacterial cell membrane, and the leakage of cell contents were observed using SEM and TEM. The expression of metabolic oxidation regulatory genes dmpI, narJ and narK was upregulated and the intracellular ROS generation was induced, causing bacterial oxidative stress and eventually bacterial death. S-PCDs can effectively inhibit biofilm formation and had low cytotoxicity. The S-PCD treatment successfully inhibited microbial reproduction when pasteurized milk was stored at 25 °C and 4 °C. These results provide important insights into the antimicrobial mechanism of S-PCDs and lay the foundation for their application in the food field as a potentially novel bacteriostatic nanomaterial.
Collapse
Affiliation(s)
- Tianqi Cui
- Faculty of Food Science and Engineering, Kunming University of Science and Technology, Kunming 650550, China
- College of Food Science, Northeast Agricultural University, Harbin 150030, China
| | - Ya Fan
- Faculty of Food Science and Engineering, Kunming University of Science and Technology, Kunming 650550, China
| | - Yaping Liu
- Faculty of Food Science and Engineering, Kunming University of Science and Technology, Kunming 650550, China
| | - Xuejing Fan
- Faculty of Food Science and Engineering, Kunming University of Science and Technology, Kunming 650550, China
| | - Yuxue Sun
- College of Food Science, Northeast Agricultural University, Harbin 150030, China
| | - Guiguang Cheng
- Faculty of Food Science and Engineering, Kunming University of Science and Technology, Kunming 650550, China
| | - Jianjun Cheng
- College of Food Science, Northeast Agricultural University, Harbin 150030, China
| |
Collapse
|
5
|
Sarkar S, Moitra P, Bhattacharya S. Structure-activity relationship of drug conjugated polymeric materials against uropathogenic bacteria colonization under in vitro and in vivo settings. J Mater Chem B 2023; 12:187-201. [PMID: 38059523 DOI: 10.1039/d3tb01841e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/08/2023]
Abstract
The human world has been plagued with different kinds of bacterial infections from time immemorial. The increased development of resistance towards commercial antibiotics has made these bacterial infections an even more critical challenge. Bacteria have modified their mode of interactions with different types of commercial drugs by bringing changes to the receptor proteins or by other resisting mechanisms like drug efflux. Various chemical approaches have been made to date to fight against these smart adapting species. Towards this, we hypothesize chemically modifying the commercial antibacterial drugs in order to deceive the bacteria and destroy the bacterial biomass. In this study, different molecular weight polyethyleneimines are taken and conjugated with some well-known commercial drugs like penicillin and chloramphenicol to explore their antibacterial properties against some of the laboratory and uro-pathogenic strains of Gram-positive and Gram-negative bacteria. A detailed structure-activity relationship of these polymeric prodrug-like materials has been evaluated to determine the optimum formulation. The standardized system not only shows significant ∼90% bacterial killing in liquid broth culture, but also demonstrates promising bacterial inhibition towards biofilm formation for the pathogenic strains on inanimate surfaces like urinary catheters and on an in vivo mouse skin abrasion model. The reported bioactive polymeric materials can be successfully used for widespread therapeutic applications with promising medical relevance.
Collapse
Affiliation(s)
- Sourav Sarkar
- School of Applied & Interdisciplinary Sciences, Indian Association for the Cultivation of Science, Kolkata 700032, India.
| | - Parikshit Moitra
- Department of Nuclear Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802, USA
- Technical Research Centre, Indian Association for the Cultivation of Science, Kolkata 700032, India
| | - Santanu Bhattacharya
- School of Applied & Interdisciplinary Sciences, Indian Association for the Cultivation of Science, Kolkata 700032, India.
- Technical Research Centre, Indian Association for the Cultivation of Science, Kolkata 700032, India
- Department of Organic Chemistry, Indian Institute of Science, Bangalore 560012, India
- Department of Chemistry, Indian Institute of Science Education and Research Tirupati, Srinivasapuram, Yerpedu Mandal, Tirupati District, Andhra Pradesh 517619, India
| |
Collapse
|
6
|
Mehta D, Saini V, Bajaj A. Recent developments in membrane targeting antifungal agents to mitigate antifungal resistance. RSC Med Chem 2023; 14:1603-1628. [PMID: 37731690 PMCID: PMC10507810 DOI: 10.1039/d3md00151b] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/31/2023] [Accepted: 06/22/2023] [Indexed: 09/22/2023] Open
Abstract
Fungal infections cause severe and life-threatening complications especially in immunocompromised individuals. Antifungals targeting cellular machinery and cell membranes including azoles are used in clinical practice to manage topical to systemic fungal infections. However, continuous exposure to clinically used antifungal agents in managing the fungal infections results in the development of multi-drug resistance via adapting different kinds of intrinsic and extrinsic mechanisms. The unique chemical composition of fungal membranes presents attractive targets for antifungal drug discovery as it is difficult for fungal cells to modify the membrane targets for emergence of drug resistance. Here, we discussed available antifungal drugs with their detailed mechanism of action and described different antifungal resistance mechanisms. We further emphasized structure-activity relationship studies of membrane-targeting antifungal agents, and classified membrane-targeting antifungal agents on the basis of their core scaffold with detailed pharmacological properties. This review aims to pique the interest of potential researchers who could explore this interesting and intricate fungal realm.
Collapse
Affiliation(s)
- Devashish Mehta
- Laboratory of Nanotechnology and Chemical Biology, Regional Centre for Biotechnology Faridabad-121001 Haryana India
| | - Varsha Saini
- Laboratory of Nanotechnology and Chemical Biology, Regional Centre for Biotechnology Faridabad-121001 Haryana India
| | - Avinash Bajaj
- Laboratory of Nanotechnology and Chemical Biology, Regional Centre for Biotechnology Faridabad-121001 Haryana India
| |
Collapse
|
7
|
Elfarargy RG, Sedki M, Samhan FA, Hassan RYA, El-Sherbiny IM. Surface grafting of polymeric catheters and stents to prevent biofilm formation of pathogenic bacteria. J Genet Eng Biotechnol 2023; 21:92. [PMID: 37707582 PMCID: PMC10501021 DOI: 10.1186/s43141-023-00545-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/21/2022] [Accepted: 09/01/2023] [Indexed: 09/15/2023]
Abstract
BACKGROUND Tecothane (medical grade of polyurethane) is strongly involved in the fabrication of metallic and polymeric-based medical devices (e.g., catheters and stents) as they can withstand cardiac cycle-related forces without deforming or failing, and they can mimic tissue behavior. The main problem is microbial contamination and formation of pathogenic biofilms on such solid surfaces within the human body. Accordingly, our hypothesis is the coating of tecothane outer surfaces with antibacterial agents through the electro-deposition or chemical grafting of anti-biofilm agents onto the stent and catheter surfaces. RESULTS Tecothane is grafted with itaconic acid for cross-linking the polyethyleneimine (PEI) as the protective-active layer. Accordingly, the grafting of poly-itaconic acid onto the Tecothane was achieved by three different methods: wet-chemical approach, electro-polymerization, or by using plasma treatment. The successful modifications were verified using Fourier Transform Infrared (FTIR) spectroscopy, grafting percentage calculations, electrochemical, and microscopic monitoring of biofilm formation. The grafting efficiency of itaconic acid was over 3.2% (w/w) at 60 ℃ after 6 h of the catheter chemical modification. Bio-electrochemical signals of biofilms have been seriously reduced after chemical modification because of the inhibition of biofilm formation (for both Pseudomonas aeruginosa and Staphylococcus aureus) over a period of 9 days. CONCLUSION Chemical functionalization of the polyurethane materials with the antimicrobial and anti-biofilm agents led to a significant decrease in the formation of pathogenic biofilms. This promising proof-concept will open the door to explore further surface protection with potential anti-biofilm agents providing better and sustainable productions of stents and catheters biomaterials.
Collapse
Affiliation(s)
- Reham G Elfarargy
- Center for Materials Science, Zewail City of Science and Technology, 6Th October City, Giza, 12578, Egypt
| | - Mohamed Sedki
- Center for Materials Science, Zewail City of Science and Technology, 6Th October City, Giza, 12578, Egypt
| | - Farag A Samhan
- Water Pollution Research Department, National Research Centre (NRC), Giza, Egypt
| | - Rabeay Y A Hassan
- Center for Materials Science, Zewail City of Science and Technology, 6Th October City, Giza, 12578, Egypt.
| | - Ibrahim M El-Sherbiny
- Center for Materials Science, Zewail City of Science and Technology, 6Th October City, Giza, 12578, Egypt.
| |
Collapse
|
8
|
Pachla J, Kopiasz RJ, Marek G, Tomaszewski W, Głogowska A, Drężek K, Kowalczyk S, Podgórski R, Butruk-Raszeja B, Ciach T, Mierzejewska J, Plichta A, Augustynowicz-Kopeć E, Jańczewski D. Polytrimethylenimines: Highly Potent Antibacterial Agents with Activity and Toxicity Modulated by the Polymer Molecular Weight. Biomacromolecules 2023; 24:2237-2249. [PMID: 37093622 PMCID: PMC10170506 DOI: 10.1021/acs.biomac.3c00139] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/25/2023]
Abstract
Cationic polymers have been extensively investigated as a potential replacement for traditional antibiotics. Here, we examined the effect of molecular weight (MW) on the antimicrobial, cytotoxic, and hemolytic activity of linear polytrimethylenimine (L-PTMI). The results indicate that the biological activity of the polymer sharply increases as MW increases. Thanks to a different position of the antibacterial activity and toxicity thresholds, tuning the MW of PTMI allows one to achieve a therapeutic window between antimicrobial activity and toxicity concentrations. L-PTMI presents significantly higher antimicrobial activity against model microorganisms than linear polyethylenimine (L-PEI) when polymers with a similar number of repeating units are compared. For the derivatives of L-PTMI and L-PEI, obtained through N-monomethylation and partial N,N-dimethylation of linear polyamines, the antimicrobial activity and toxicity were both reduced; however, resulting selectivity indices were higher. Selected materials were tested against clinical isolates of pathogens from the ESKAPE group and Mycobacteria, revealing good antibacterial properties of L-PTMI against antibiotic-resistant strains of Gram-positive and Gram-negative bacteria but limited antibacterial properties against Mycobacteria.
Collapse
Affiliation(s)
- Julita Pachla
- Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland
| | - Rafał J Kopiasz
- Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland
| | - Gabriela Marek
- Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland
| | - Waldemar Tomaszewski
- Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland
| | - Agnieszka Głogowska
- Department of Microbiology, National Tuberculosis and Lung Diseases Research Institute, Płocka 26, 01-138 Warsaw, Poland
| | - Karolina Drężek
- Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland
| | - Sebastian Kowalczyk
- Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland
| | - Rafał Podgórski
- Faculty of Chemical and Process Engineering, Warsaw University of Technology, Waryńskiego 1, 00-645 Warsaw, Poland
| | - Beata Butruk-Raszeja
- Faculty of Chemical and Process Engineering, Warsaw University of Technology, Waryńskiego 1, 00-645 Warsaw, Poland
| | - Tomasz Ciach
- Faculty of Chemical and Process Engineering, Warsaw University of Technology, Waryńskiego 1, 00-645 Warsaw, Poland
| | - Jolanta Mierzejewska
- Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland
| | - Andrzej Plichta
- Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland
| | - Ewa Augustynowicz-Kopeć
- Department of Microbiology, National Tuberculosis and Lung Diseases Research Institute, Płocka 26, 01-138 Warsaw, Poland
| | - Dominik Jańczewski
- Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland
| |
Collapse
|
9
|
Akif FA, Mahmoud M, Prasad B, Richter P, Azizullah A, Qasim M, Anees M, Krüger M, Gastiger S, Burkovski A, Strauch SM, Lebert M. Polyethylenimine Increases Antibacterial Efficiency of Chlorophyllin. Antibiotics (Basel) 2022; 11:antibiotics11101371. [PMID: 36290029 PMCID: PMC9598908 DOI: 10.3390/antibiotics11101371] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/24/2022] [Revised: 09/27/2022] [Accepted: 09/28/2022] [Indexed: 11/16/2022] Open
Abstract
Polyethylenimines (PEIs), a group of polycationic molecules, are known to impair the outer membrane of Gram-negative bacteria and exhibit antimicrobial activity. The outer membrane of Gram-negative strains hinders the uptake of photosensitizer chlorophyllin. In this study, we report chlorophyllin and branched PEI combinations’ activity against Escherichia coli strains DH5α and RB791, Salmonella enterica sv. Typhimurium LT2, and Bacillus subtilis 168. The minimal bactericidal concentration (MBC) was determined by plating cells treated with different concentrations of PEI and chlorophyllin on agar and monitoring their growth after 24 h. All tested combinations of PEI and chlorophyllin were lethal for S. enterica after 240 min of incubation in light, whereas PEI alone (<100 µg mL−1) was ineffective. In the darkness, complete inhibition was noted with a combination of ≥2.5 µg mL−1 chlorophyllin and 50 µg mL−1 PEI. If applied alone, PEI alone of ≥800 µg mL−1 of PEI was required to completely inactivate E. coli DH5α cells in light, whereas with ≥5 µg mL−1 chlorophyllin, only ≥100 µg mL−1 PEI was needed. No effect was detected in darkness with PEI alone. However, 1600 µg mL−1 PEI in combination with 2.5 µg mL−1 resulted in complete inactivation after 4 h dark incubation. PEI alone did not inhibit E. coli strain RB791, while cells were inactivated when treated with 10 µg mL−1 chlorophyllin in combination with ≥100 µg mL−1 (in light) or ≥800 µg mL−1 PEI (in darkness). Under illumination, B. subtilis was inactivated at all tested concentrations. In the darkness, 1 µg mL−1 chlorophyllin and 12.5 µg mL−1 PEI were lethal for B. subtilis. Overall, PEI can be used as an antimicrobial agent or potentiating agent for ameliorating the antimicrobial activity of chlorophyllin.
Collapse
Affiliation(s)
- Faheem Ahmad Akif
- Department of Microbiology, Kohat University of Science and Technology (KUST), Kohat 26000, Pakistan
- Gravitational Biology Group, Department of Biology, Cell Biology Division, Friedrich-Alexander-Universität, Erlangen-Nürnberg, 91058 Erlangen, Germany
| | - Mona Mahmoud
- Gravitational Biology Group, Department of Biology, Cell Biology Division, Friedrich-Alexander-Universität, Erlangen-Nürnberg, 91058 Erlangen, Germany
- Dairy Department (Microbiology Lab.), National Research Centre, Cairo 12622, Egypt
- Department of Biology, Microbiology Division, Friedrich-Alexander-Universität, Erlangen-Nürnberg, 91058 Erlangen, Germany
| | - Binod Prasad
- Gravitational Biology Group, Department of Biology, Cell Biology Division, Friedrich-Alexander-Universität, Erlangen-Nürnberg, 91058 Erlangen, Germany
| | - Peter Richter
- Gravitational Biology Group, Department of Biology, Cell Biology Division, Friedrich-Alexander-Universität, Erlangen-Nürnberg, 91058 Erlangen, Germany
- Correspondence: (P.R.); (M.Q.)
| | - Azizullah Azizullah
- Department of Botany, Kohat University of Science and Technology (KUST), Kohat 26000, Pakistan
| | - Muhammad Qasim
- Department of Microbiology, Kohat University of Science and Technology (KUST), Kohat 26000, Pakistan
- Correspondence: (P.R.); (M.Q.)
| | - Muhammad Anees
- Department of Microbiology, Kohat University of Science and Technology (KUST), Kohat 26000, Pakistan
| | - Marcus Krüger
- Environmental Cell Biology Group, Department of Microgravity and Translational Regenerative Medicine, Otto-von-Guericke University, 39106 Magdeburg, Germany
| | - Susanne Gastiger
- Department of Biology, Microbiology Division, Friedrich-Alexander-Universität, Erlangen-Nürnberg, 91058 Erlangen, Germany
| | - Andreas Burkovski
- Department of Biology, Microbiology Division, Friedrich-Alexander-Universität, Erlangen-Nürnberg, 91058 Erlangen, Germany
| | - Sebastian M. Strauch
- Postgraduate Program in Health and Environment, University of Joinville Region, Joinville 89219-710, SC, Brazil
| | - Michael Lebert
- Gravitational Biology Group, Department of Biology, Cell Biology Division, Friedrich-Alexander-Universität, Erlangen-Nürnberg, 91058 Erlangen, Germany
- Space Biology Unlimited S.A.S., 33000 Bordeaux, France
| |
Collapse
|
10
|
Baselga M, Uranga-Murillo I, de Miguel D, Arias M, Sebastián V, Pardo J, Arruebo M. Silver Nanoparticles–Polyethyleneimine-Based Coatings with Antiviral Activity against SARS-CoV-2: A New Method to Functionalize Filtration Media. Materials 2022; 15:ma15144742. [PMID: 35888208 PMCID: PMC9318907 DOI: 10.3390/ma15144742] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/07/2022] [Revised: 06/27/2022] [Accepted: 07/04/2022] [Indexed: 02/06/2023]
Abstract
The use of face masks and air purification systems has been key to curbing the transmission of SARS-CoV-2 aerosols in the context of the current COVID-19 pandemic. However, some masks or air conditioning filtration systems are designed to remove large airborne particles or bacteria from the air, being limited their effectiveness against SARS-CoV-2. Continuous research has been aimed at improving the performance of filter materials through nanotechnology. This article presents a new low-cost method based on electrostatic forces and coordination complex formation to generate antiviral coatings on filter materials using silver nanoparticles and polyethyleneimine. Initially, the AgNPs synthesis procedure was optimized until reaching a particle size of 6.2 ± 2.6 nm, promoting a fast ionic silver release due to its reduced size, obtaining a stable colloid over time and having reduced size polydispersity. The stability of the binding of the AgNPs to the fibers was corroborated using polypropylene, polyester-viscose, and polypropylene-glass spunbond mats as substrates, obtaining very low amounts of detached AgNPs in all cases. Under simulated operational conditions, a material loss less than 1% of nanostructured silver was measured. SEM micrographs demonstrated high silver distribution homogeneity on the polymer fibers. The antiviral coatings were tested against SARS-CoV-2, obtaining inactivation yields greater than 99.9%. We believe our results will be beneficial in the fight against the current COVID-19 pandemic and in controlling other infectious airborne pathogens.
Collapse
Affiliation(s)
- Marta Baselga
- Institute for Health Research Aragon (IIS Aragón), 50009 Zaragoza, Spain; (I.U.-M.); (D.d.M.); (M.A.); (V.S.); (J.P.); (M.A.)
- Correspondence:
| | - Iratxe Uranga-Murillo
- Institute for Health Research Aragon (IIS Aragón), 50009 Zaragoza, Spain; (I.U.-M.); (D.d.M.); (M.A.); (V.S.); (J.P.); (M.A.)
- Department of Microbiology, Pediatrics, Radiology and Public Health, Facultad de Medicina, University of Zaragoza, 50009 Zaragoza, Spain
- Networking Research Center on Infectious Diseases, CIBERINFEC, 28029 Madrid, Spain
| | - Diego de Miguel
- Institute for Health Research Aragon (IIS Aragón), 50009 Zaragoza, Spain; (I.U.-M.); (D.d.M.); (M.A.); (V.S.); (J.P.); (M.A.)
- Department of Microbiology, Pediatrics, Radiology and Public Health, Facultad de Medicina, University of Zaragoza, 50009 Zaragoza, Spain
| | - Maykel Arias
- Institute for Health Research Aragon (IIS Aragón), 50009 Zaragoza, Spain; (I.U.-M.); (D.d.M.); (M.A.); (V.S.); (J.P.); (M.A.)
- Department of Microbiology, Pediatrics, Radiology and Public Health, Facultad de Medicina, University of Zaragoza, 50009 Zaragoza, Spain
- Networking Research Center on Infectious Diseases, CIBERINFEC, 28029 Madrid, Spain
| | - Victor Sebastián
- Institute for Health Research Aragon (IIS Aragón), 50009 Zaragoza, Spain; (I.U.-M.); (D.d.M.); (M.A.); (V.S.); (J.P.); (M.A.)
- Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza, 50009 Zaragoza, Spain
- Department of Chemical Engineering, Campus Río Ebro–Edificio I+D, University of Zaragoza, 50018 Zaragoza, Spain
- Networking Research Center on Bioengineering, Biomaterials and Nanomedicine, CIBER-BBN, 28029 Madrid, Spain
| | - Julián Pardo
- Institute for Health Research Aragon (IIS Aragón), 50009 Zaragoza, Spain; (I.U.-M.); (D.d.M.); (M.A.); (V.S.); (J.P.); (M.A.)
- Department of Microbiology, Pediatrics, Radiology and Public Health, Facultad de Medicina, University of Zaragoza, 50009 Zaragoza, Spain
- Networking Research Center on Infectious Diseases, CIBERINFEC, 28029 Madrid, Spain
| | - Manuel Arruebo
- Institute for Health Research Aragon (IIS Aragón), 50009 Zaragoza, Spain; (I.U.-M.); (D.d.M.); (M.A.); (V.S.); (J.P.); (M.A.)
- Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza, 50009 Zaragoza, Spain
- Department of Chemical Engineering, Campus Río Ebro–Edificio I+D, University of Zaragoza, 50018 Zaragoza, Spain
- Networking Research Center on Bioengineering, Biomaterials and Nanomedicine, CIBER-BBN, 28029 Madrid, Spain
| |
Collapse
|
11
|
Cao M, Liu C, Li M, Zhang X, Peng L, Liu L, Liao J, Yang J. Recent Research on Hybrid Hydrogels for Infection Treatment and Bone Repair. Gels 2022; 8:gels8050306. [PMID: 35621604 PMCID: PMC9140391 DOI: 10.3390/gels8050306] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/20/2022] [Revised: 05/10/2022] [Accepted: 05/12/2022] [Indexed: 11/16/2022] Open
Abstract
The repair of infected bone defects (IBDs) is still a great challenge in clinic. A successful treatment for IBDs should simultaneously resolve both infection control and bone defect repair. Hydrogels are water-swollen hydrophilic materials that maintain a distinct three-dimensional structure, helping load various antibacterial drugs and biomolecules. Hybrid hydrogels may potentially possess antibacterial ability and osteogenic activity. This review summarizes the recent progress of different kinds of antibacterial agents (including inorganic, organic, and natural) encapsulated in hydrogels. Several representative hydrogels of each category and their antibacterial mechanism and effect on bone repair are presented. Moreover, the advantages and disadvantages of antibacterial agent hybrid hydrogels are discussed. The challenge and future research directions are further prospected.
Collapse
Affiliation(s)
- Mengjiao Cao
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Department of Cariology and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China; (M.C.); (M.L.); (L.L.)
| | - Chengcheng Liu
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Department of Periodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China;
| | - Mengxin Li
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Department of Cariology and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China; (M.C.); (M.L.); (L.L.)
| | - Xu Zhang
- State Key Laboratory of Oral Diseases, National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China;
| | - Li Peng
- Key Laboratory of Bio-Resource and Eco-Environment of Ministry of Education, College of Life Sciences, Sichuan University, Chengdu 610065, China;
| | - Lijia Liu
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Department of Cariology and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China; (M.C.); (M.L.); (L.L.)
| | - Jinfeng Liao
- State Key Laboratory of Oral Diseases, National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China;
- Correspondence: (J.L.); (J.Y.)
| | - Jing Yang
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Department of Cariology and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China; (M.C.); (M.L.); (L.L.)
- Correspondence: (J.L.); (J.Y.)
| |
Collapse
|
12
|
Bharti S, Zakir F, Mirza MA, Aggarwal G. Antifungal biofilm strategies: a less explored area in wound management. Curr Pharm Biotechnol 2022; 23:1497-1513. [PMID: 35410595 DOI: 10.2174/1389201023666220411100214] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2021] [Revised: 11/03/2021] [Accepted: 01/03/2022] [Indexed: 11/22/2022]
Abstract
Background- The treatment of wound associated infections has always remained a challenge for clinicians with the major deterring factor being microbial biofilms, majorly bacterial or fungal. Biofilm infections are becoming a global concern owing to resistance against antimicrobials. Fungal biofilms are formed by a wide variety of fungal pathogens namely Candida sp., Aspergillus fumigates, Trichosporon sp., Saccharomyces cerevisiae, Cryptococcus neoformans, among others. The rising cases of fungal biofilm resistance add to the burden of wound care. Additionally, with increase in the number of surgical procedures, transplantation and the exponential use of medical devices, fungal bioburden is on the rise. Objectives- The review discusses the methods of biofilm formation and the resistance mechanisms against conventional treatments. The potential of novel delivery strategies and the mechanisms involved therein are highlighted. Further, the prospects of nanotechnology based medical devices to combat fungal biofilm resistance have also been explored. Some of the clinical trials and up-to-date patent technologies to eradicate the biofilms are also mentioned. Conclusion- Due to the many challenges faced in preventing/eradicating biofilms, only a handful of approaches have been able to make it to the market. Fungal biofilms are a fragmentary area which needs further exploration.
Collapse
Affiliation(s)
- Shilpa Bharti
- Pharmaceutical Sciences, Delhi Pharmaceutical Sciences and Research University, New Delhi
| | - Foziyah Zakir
- Pharmaceutical Sciences, Delhi Pharmaceutical Sciences and Research University, New Delhi
| | - Mohd Aamir Mirza
- Department of Pharmaceutics, School of Pharmaceutical Education and Research, Jamia Hamdard, New Delhi, India
| | - Geeta Aggarwal
- Department of Pharmaceutics, School of Pharmaceutical Sciences, Delhi Pharmaceutical Sciences and Research University, New Delhi, India
| |
Collapse
|
13
|
Abstract
Infective endocarditis (IE) has been recognized as a biofilm-related disease caused by pathogenic microorganisms, such as bacteria and fungi that invade and damage the heart valves and endocardium. There are many difficulties and challenges in the antimicrobial treatment of IE, including multi-drug resistant pathogens, large dose of drug administration with following side effects, and poor prognosis. For the past few years, the development of nanotechnology has promoted the use of nanoparticles as antimicrobial nano-pharmaceuticals or novel drug delivery systems (NDDS) in antimicrobial therapy for chronic infections and biofilm-related infectious disease as these molecules exhibit several advantages. Therefore, nanoparticles have a potential role to play in solving problems in the treatment of IE, including improving antimicrobial activity, increasing drug bioavailability, minimizing frequency of drug administration, and preventing side effects. In this article, we review the latest advances in nanoparticles against drug-resistant bacteria in biofilm and recommends nanoparticles as an alternative strategy to the antibiotic treatment of IE.
Collapse
Affiliation(s)
- Qi Tong
- Department of Cardiovascular Surgery, National Clinical Research Center for Geriatrics, West China Hospital, Sichuan University; Chengdu-China
| | - Tao Li
- Department of Cardiovascular Surgery, National Clinical Research Center for Geriatrics, West China Hospital, Sichuan University; Chengdu-China
| | - Lu Jiang
- Department of Cardiovascular Surgery, Sichuan Provincial People's University of Electronic Science and Technology of China; Chengdu-China
| | - Zhengjie Wang
- Department of Cardiovascular Surgery, National Clinical Research Center for Geriatrics, West China Hospital, Sichuan University; Chengdu-China
| | - Yongjun Qian
- Department of Cardiovascular Surgery, National Clinical Research Center for Geriatrics, West China Hospital, Sichuan University; Chengdu-China
| |
Collapse
|
14
|
Semenova A, Vidallon MLP, Follink B, Brown PL, Tabor RF. Synthesis and Characterization of Polyethylenimine-Silica Nanocomposite Microparticles. Langmuir 2022; 38:191-202. [PMID: 34932365 DOI: 10.1021/acs.langmuir.1c02393] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
A novel procedure for the synthesis of polyethylenimine (PEI)-silica nanocomposite particles with high adsorption capacities has been developed based on an emulsion templating concept. The exceptional chelating properties of PEI as the parent polymer for the particle core promote the binding abilities of the resulting composite for charged species. Further, the subsequent introduction of silica via the self-catalyzed hydrolysis of tetraethoxysilane facilitates production of robust composite particles with smooth surfaces, enabling potential use in multiphase environments. To enable tailored application in solid/liquid porous environments, the production of particles with reduced sizes was attempted by modulating the shear rates and surfactant concentrations during emulsification. The use of high-speed homogenization resulted in a substantial decrease in average particle size, while increasing surfactant loading only had a limited effect. All types of nanocomposites produced demonstrated excellent binding capacities for copper ions as a test solute. The maximum binding capacities of the PEI-silica nanocomposites of 210-250 mg/g are comparable to or exceed those of other copper binding materials, opening up great application potential in resources, chemical processing, and remediation industries.
Collapse
Affiliation(s)
- Alexandra Semenova
- School of Chemistry, Monash University, 19 Rainforest Walk, Clayton 3800, Australia
| | | | - Bart Follink
- School of Chemistry, Monash University, 19 Rainforest Walk, Clayton 3800, Australia
| | - Paul L Brown
- Bundoora Technical Development Centre, Rio Tinto, 1 Research Avenue, Bundoora 3083, Australia
| | - Rico F Tabor
- School of Chemistry, Monash University, 19 Rainforest Walk, Clayton 3800, Australia
| |
Collapse
|
15
|
Abstract
Rising global populations due to medicinal advancements increases the patient population susceptible to superficial and severe fungal infections. Fungi often implicated in these diseases includes the dermatophytes (Microsporum spp., Epidermophtyon spp., Trichophyton spp.) as well as species of the Candida spp., Aspergillosis spp. and Cryptococcus spp. genera. In addition, increasing global populations leads to increasing agricultural demands. Thus, fungal infections of preharvested crops and stored food by plant pathogens such as Magnaporthe oryzae and Fusarium oxysporum can have detrimental socioeconomic effects due to food insecurity. Current antifungal strategies are based mainly on small molecule antifungal drugs. However, these drugs are limited by poor solubility and bioavailability. Furthermore, antifungal resistance against these drugs are on the rise. Thus, antimicrobial polymers offer an alternative antifungal strategy. Antifungal polymers are characterised by cationic and hydrophobic regions where the cationic regions have been shown to interact with microbial phospholipids and membranes. These polymers can be synthetic or natural and demonstrate distinct antifungal mechanisms ranging from fungal cell membrane permeabilisation, cell membrane depolarisation or cell entry. Although the relative importance of such mechanisms is difficult to decipher. Due to the chemical properties of these polymers, they can be combined with other antimicrobial compounds including existing antifungal drugs, charcoals, lipids and metal ions to elicit synergistic effects. In some cases, antifungal polymers and nanocomposites show better antifungal effects or reduced toxicity compared to the widely used small molecule antifungal drugs. This review provides an overview of antimicrobial polymers and nanocomposites with antifungal activity and the current understanding of their antifungal mechanisms.
Collapse
Affiliation(s)
- Winnie Ntow-Boahene
- The Royal Veterinary College, Pathobiology and Population Sciences, London, England
| | - David Cook
- Blueberry Therapeutics Ltd., Macclesfield, England
| | - Liam Good
- The Royal Veterinary College, Pathobiology and Population Sciences, London, England
| |
Collapse
|
16
|
Wang Q, Feng Z, He C, Liu T, Lu H, Sun R. Preparation and performance study of a reactive polyurethane hot-melt adhesive/CS–Fe 3O 4 magnetic nanocomposite film/fabric. RSC Adv 2022; 12:27463-27472. [PMID: 36276029 PMCID: PMC9516560 DOI: 10.1039/d2ra05614c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2022] [Accepted: 09/19/2022] [Indexed: 11/21/2022] Open
Abstract
Magnetic nanoparticles are attracting significant attention for their wide application as biomaterials and magnetic storage materials. As an environmentally friendly adhesive, reactive polyurethane hot-melt adhesive (PUR) is a biocompatible polymer with a wide range of applications. In this paper, chitosan (CS)-surface-modified magnetic Fe3O4 nanoparticles were synthesized by the sol–gel method. Surface modification of the Fe3O4 nanoparticles with CS enhanced their mechanical properties in PUR. The nanoparticles were characterized by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses, while their surface morphology was elucidated using scanning electron microscopy (SEM) and projection electron microscopy (TEM) techniques. Subsequently, PUR/CS–Fe3O4 magnetic nanocomposite films were prepared using an in situ method, wherein different amounts of CS–surface-modified magnetic Fe3O4 nanoparticles were doped into the PUR and coated on the films. The thermal, UV resistance and mechanical properties of the PUR/CS–Fe3O4 magnetic nanocomposite films were investigated by TGA, UV spectrometer and tensile testing. CS–Fe3O4 nanoparticles were successfully prepared using the sol–gel method and CS to modify the surface of the Fe3O4 nanoparticles. The results show that the mechanical properties and UV resistance of PUR/CS–Fe3O4 magnetic nanocomposites are improved by almost 50%, so the constructed PUR/CS–Fe3O4 magnetic nanocomposites have good UV-resistant properties and mechanical properties. The as-synthesized CS–Fe3O4 magnetic nanocomposites show great potential for application to mechanical and textile development. Magnetic nanoparticles are attracting significant attention for their wide application as biomaterials and magnetic storage materials. As an environmentally friendly adhesive, reactive polyurethane hot-melt adhesive is a biocompatible polymer with a range of applications.![]()
Collapse
Affiliation(s)
- Qiushi Wang
- School of Textile Science and Engineering, Xi'an Polytechnic University, Xi'an, Shaanxi 710048, China
| | - Ziqin Feng
- Group of Mechanical and Biomedical Engineering, Xi'an Key Laboratory of Modern Intelligent Textile Equipment, College of Mechanical & Electronic Engineering, Xi'an Polytechnic University, Xi'an, Shaanxi 710048, P. R. China
| | - Caiting He
- School of Textile Science and Engineering, Xi'an Polytechnic University, Xi'an, Shaanxi 710048, China
| | - Tianwei Liu
- School of Textile Science and Engineering, Xi'an Polytechnic University, Xi'an, Shaanxi 710048, China
| | - Hailin Lu
- Group of Mechanical and Biomedical Engineering, Xi'an Key Laboratory of Modern Intelligent Textile Equipment, College of Mechanical & Electronic Engineering, Xi'an Polytechnic University, Xi'an, Shaanxi 710048, P. R. China
| | - Runjun Sun
- School of Textile Science and Engineering, Xi'an Polytechnic University, Xi'an, Shaanxi 710048, China
| |
Collapse
|
17
|
Nasri N, Rusli A, Teramoto N, Jaafar M, Ku Ishak KM, Shafiq MD, Abdul Hamid ZA. Past and Current Progress in the Development of Antiviral/Antimicrobial Polymer Coating towards COVID-19 Prevention: A Review. Polymers (Basel) 2021; 13:4234. [PMID: 34883737 PMCID: PMC8659939 DOI: 10.3390/polym13234234] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/15/2021] [Revised: 11/04/2021] [Accepted: 11/08/2021] [Indexed: 01/10/2023] Open
Abstract
The astonishing outbreak of SARS-CoV-2 coronavirus, known as COVID-19, has attracted numerous research interests, particularly regarding fabricating antimicrobial surface coatings. This initiative is aimed at overcoming and minimizing viral and bacterial transmission to the human. When contaminated droplets from an infected individual land onto common surfaces, SARS-CoV-2 coronavirus is able to survive on various surfaces for up to 9 days. Thus, the possibility of virus transmission increases after touching or being in contact with contaminated surfaces. Herein, we aim to provide overviews of various types of antiviral and antimicrobial coating agents, such as antimicrobial polymer-based coating, metal-based coating, functional nanomaterial, and nanocomposite-based coating. The action mode for each type of antimicrobial agent against pathogens is elaborated. In addition, surface properties of the designed antiviral and antimicrobial polymer coating with their influencing factors are discussed in this review. This paper also exhibits several techniques on surface modification to improve surface properties. Various developed research on the development of antiviral/antimicrobial polymer coating to curb the COVID-19 pandemic are also presented in this review.
Collapse
Affiliation(s)
- Nazihah Nasri
- School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal 14300, Pulau Pinang, Malaysia; (N.N.); (A.R.); (M.J.); (K.M.K.I.); (M.D.S.)
| | - Arjulizan Rusli
- School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal 14300, Pulau Pinang, Malaysia; (N.N.); (A.R.); (M.J.); (K.M.K.I.); (M.D.S.)
| | - Naozumi Teramoto
- Department of Applied Chemistry, Faculty of Engineering, Chiba Institute of Technology, 2-17-1 Tsudanuma, Narashino 275-0016, Chiba, Japan;
| | - Mariatti Jaafar
- School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal 14300, Pulau Pinang, Malaysia; (N.N.); (A.R.); (M.J.); (K.M.K.I.); (M.D.S.)
| | - Ku Marsilla Ku Ishak
- School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal 14300, Pulau Pinang, Malaysia; (N.N.); (A.R.); (M.J.); (K.M.K.I.); (M.D.S.)
| | - Mohamad Danial Shafiq
- School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal 14300, Pulau Pinang, Malaysia; (N.N.); (A.R.); (M.J.); (K.M.K.I.); (M.D.S.)
| | - Zuratul Ain Abdul Hamid
- School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal 14300, Pulau Pinang, Malaysia; (N.N.); (A.R.); (M.J.); (K.M.K.I.); (M.D.S.)
| |
Collapse
|
18
|
Molotkovsky RJ, Galimzyanov TR, Ermakov YA. Heterogeneity in Lateral Distribution of Polycations at the Surface of Lipid Membrane: From the Experimental Data to the Theoretical Model. Materials (Basel) 2021; 14:6623. [PMID: 34772149 PMCID: PMC8585412 DOI: 10.3390/ma14216623] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/30/2021] [Revised: 10/26/2021] [Accepted: 10/29/2021] [Indexed: 11/16/2022]
Abstract
Natural and synthetic polycations of different kinds attract substantial attention due to an increasing number of their applications in the biomedical industry and in pharmacology. The key characteristic determining the effectiveness of the majority of these applications is the number of macromolecules adsorbed on the surface of biological cells or their lipid models. Their study is complicated by a possible heterogeneity of polymer layer adsorbed on the membrane. Experimental methods reflecting the structure of the layer include the electrokinetic measurements in liposome suspension and the boundary potential of planar bilayer lipid membranes (BLM) and lipid monolayers with a mixed composition of lipids and the ionic media. In the review, we systematically analyze the methods of experimental registration and theoretical description of the laterally heterogeneous structures in the polymer layer published in the literature and in our previous studies. In particular, we consider a model based on classical theory of the electrical double layer, used to analyze the available data of the electrokinetic measurements in liposome suspension with polylysines of varying molecular mass. This model suggests a few parameters related to the heterogeneity of the polymer layer and allows determining the conditions for its appearance at the membrane surface. A further development of this theoretical approach is discussed.
Collapse
Affiliation(s)
- Rodion J. Molotkovsky
- Laboratory of Bioelectrochemistry, A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences, 31/4 Leninskiy Prospekt, 119071 Moscow, Russia;
| | | | - Yury A. Ermakov
- Laboratory of Bioelectrochemistry, A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences, 31/4 Leninskiy Prospekt, 119071 Moscow, Russia;
| |
Collapse
|
19
|
Yildiz S, Solak K, Acar M, Mavi A, Unver Y. Magnetic nanoparticle mediated-gene delivery for simpler and more effective transformation of Pichia pastoris. Nanoscale Adv 2021; 3:4482-4491. [PMID: 36133460 PMCID: PMC9418747 DOI: 10.1039/d1na00079a] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/30/2021] [Accepted: 06/05/2021] [Indexed: 06/16/2023]
Abstract
The introduction of exogenous DNA into a cell can be used to produce large quantities of protein. Here, we describe a novel gene delivery method for Pichia pastoris based on recombinant DNA delivery using magnetic nanoparticles (MNPs) under magnetic forces. For this purpose, a linear plasmid (pGKB-GFP) containing the Green Fluorescent Protein (GFP) gene is loaded on polyethyleneimine-coated iron oxide (Fe3O4@PEI) MNPs at doses that are non-toxic to the yeast cells. The pGKB-GFP loaded MNPs combined with enhancer PEI (Fe3O4@PEI + pGKB-GFP + PEI) are directly transferred to non-competent cells. An effective GFP expression was observed by the selection of antibiotic-resistant yeast cells and heterologous gene integration into the P. pastoris genome was provided. This method, which is very simple, effective, and advanced equipment-free compared to traditional methods, uses smaller amounts of DNA and the process can be performed in a shorter time. The suggested method might also be adapted for the transformation of other yeast species.
Collapse
Affiliation(s)
- Seyda Yildiz
- Department of Molecular Biology and Genetics, Atatürk University Erzurum 25240 Turkey
| | - Kubra Solak
- Department of Nanoscience and Nanoengineering, Atatürk University Erzurum 25240 Turkey
| | - Melek Acar
- Department of Molecular Biology and Genetics, Atatürk University Erzurum 25240 Turkey
| | - Ahmet Mavi
- Department of Nanoscience and Nanoengineering, Atatürk University Erzurum 25240 Turkey
- Department of Chemistry Education, Kazım Karabekir Faculty of Education, Atatürk University Erzurum 25240 Turkey
| | - Yagmur Unver
- Department of Molecular Biology and Genetics, Atatürk University Erzurum 25240 Turkey
| |
Collapse
|
20
|
Bamunuarachchi NI, Khan F, Kim YM. Inhibition of Virulence Factors and Biofilm Formation of Acinetobacter Baumannii by Naturally-derived and Synthetic Drugs. Curr Drug Targets 2021; 22:734-759. [PMID: 33100201 DOI: 10.2174/1389450121666201023122355] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/23/2020] [Revised: 09/17/2020] [Accepted: 09/22/2020] [Indexed: 11/22/2022]
Abstract
Acinetobacter baumannii is a gram-negative, aerobic, non-motile, and pleomorphic bacillus. A. baumannii is also a highly-infectious pathogen causing high mortality and morbidity rates in intensive care units. The discovery of novel agents against A. baumannii infections is urgently needed due to the emergence of drug-resistant A. baumannii strains and the limited number of efficacious antibiotics available for treatment. In addition to the production of several virulence factors, A. baumannii forms biofilms on the host cell surface as well. Formation of biofilms occurs through initial surface attachment, microcolony formation, biofilm maturation, and detachment stages, and is one of the major drug resistance mechanisms employed by A. baumannii. Several studies have previously reported the efficacy of naturally-derived and synthetic compounds as anti- biofilm and anti-virulence agents against A. baumannii. Here, inhibition of biofilm formation and virulence factors of A. baumannii using naturally-derived and synthetic compounds are reviewed.
Collapse
Affiliation(s)
| | - Fazlurrahman Khan
- Institute of Food Science, Pukyong National University, Busan 48513, South Korea
| | - Young-Mog Kim
- Department of Food Science and Technology, Pukyong National University, Busan 48513, South Korea
| |
Collapse
|
21
|
Ghiorghita CA, Ghimici L, Ailiesei GL. Synthesis of Thiourea-Graft-Polyethyleneimine and Its Performance in Flocculation of Some Inorganic Particles. Ind Eng Chem Res 2021. [DOI: 10.1021/acs.iecr.1c00555] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/17/2023]
Affiliation(s)
| | - Luminita Ghimici
- “Petru Poni” Institute of Macromolecular Chemistry, Grigore Ghica Voda Alley 41A, Iasi 700487, Romania
| | - Gabriela-Liliana Ailiesei
- “Petru Poni” Institute of Macromolecular Chemistry, Grigore Ghica Voda Alley 41A, Iasi 700487, Romania
| |
Collapse
|
22
|
Abstract
Biocontamination of medical devices and implants is a growing issue that causes medical complications and increased expenses. In the fight against biocontamination, developing synthetic surfaces, which reduce the adhesion of microbes and provide biocidal activity or combinatory effects, has emerged as a major global strategy. Advances in nanotechnology and biological sciences have made it possible to design smart surfaces for decreasing infections. Nevertheless, the clinical performance of these surfaces is highly depending on the choice of material. This review focuses on the antimicrobial surfaces with functional material coatings, such as cationic polymers, metal coatings and antifouling micro-/nanostructures. One of the highlights of the review is providing insights into the virus-inactivating surface development, which might particularly be useful for controlling the currently confronted pandemic coronavirus disease 2019 (COVID-19). The nanotechnology-based strategies presented here might be beneficial to produce materials that reduce or prevent the transmission of airborne viral droplets, once applied to biomedical devices and protective equipment of medical workers. Overall, this review compiles existing studies in this broad field by focusing on the recent related developments, draws attention to the possible activity mechanisms, discusses the key challenges and provides future recommendations for developing new, efficient antimicrobial and antiviral surface coatings.
Collapse
|
23
|
Zhao D, Liu X, Zhang R, Xiao X, Li J. Preparation of two types of silver-doped fluorescent carbon dots and determination of their antibacterial properties. J Inorg Biochem 2020; 214:111306. [PMID: 33221600 DOI: 10.1016/j.jinorgbio.2020.111306] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2020] [Revised: 10/27/2020] [Accepted: 11/07/2020] [Indexed: 10/23/2022]
Abstract
The preparation and performance of doped antibacterial carbon dots (CDs) have been the research hotspot. In this paper, we report the preparation of two blue light-emitting silver-doped CDs, CD-1 and CD-2, through one- and two-step routes, respectively, by using polyethyleneimine, citric acid, and AgNO3 as raw materials. Both CDs exhibited excellent and broad-spectrum activity against gram-positive bacteria, gram-negative bacteria, and fungi. We compared the emission wavelength, surface group, particle size, chargeability, and element content of the two CDs through various characterization methods. CD-2 exhibiting longer emission wavelength, larger particle size, and higher silver content displayed higher antibacterial activity against microorganisms than CD-1. On the other hand, CDs exhibited varying antibacterial properties against different microorganisms because of differences in the cell wall structure of gram-positive bacteria (peptidoglycan), gram-negative bacteria (lipopolysaccharides), and fungi (chitin). Based on scanning electron microscopy observations, circular dichroism spectroscopy and agarose gel electrophoresis, we speculate that CDs exert antibacterial activity mainly through membrane disruption and their effect on intracellular DNA and proteins. At the same time, CDs have multicolor imaging capabilities of Staphylococcus aureus. The antibacterial activity and versatility of bioimaging make them more potential antibacterial agents than traditional agents.
Collapse
Affiliation(s)
- Dan Zhao
- School of Pharmaceutical Sciences, South-Central University for Nationalities, Wuhan 430074, P. R. China; National Demonstration Center for Experimental Ethnopharmacology Education (South-Central University for Nationalities), Wuhan 430065, P. R. China.
| | - Xuemei Liu
- School of Pharmaceutical Sciences, South-Central University for Nationalities, Wuhan 430074, P. R. China
| | - Rui Zhang
- School of Pharmaceutical Sciences, South-Central University for Nationalities, Wuhan 430074, P. R. China
| | - Xincai Xiao
- School of Pharmaceutical Sciences, South-Central University for Nationalities, Wuhan 430074, P. R. China
| | - Jun Li
- School of Pharmaceutical Sciences, South-Central University for Nationalities, Wuhan 430074, P. R. China
| |
Collapse
|
24
|
Liu Y, Jia J, Gao T, Wang X, Yu J, Wu D, Li F. One-pot fabrication of antibacterial β-cyclodextrin-based nanoparticles and their superfast, broad-spectrum adsorption towards pollutants. J Colloid Interface Sci 2020; 576:302-12. [PMID: 32447020 DOI: 10.1016/j.jcis.2020.05.001] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/12/2020] [Revised: 04/30/2020] [Accepted: 05/01/2020] [Indexed: 11/21/2022]
Abstract
The current water treatment technology is still based on low energy efficient processes due to the complex composition of wastewater. To achieve high energy efficiency, many micro-porous materials with complex functional groups have been fabricated because of their high pollutant adsorption capabilities. In this work, antibacterial β-cyclodextrin-based nanoparticles (E-β-CDN) were prepared via one-pot method to explore their adsorption performance to pollutants in wastewater. The resulting nanoparticles exhibited superfast adsorption kinetics to pollutants with removal efficiency of over 95% within 10 s. The nanoparticles also presented broad-spectrum adsorption to organic pollutants and heavy metal ions, and their maximum adsorption capacity was 3289.6 mg g-1 towards methyl orange (MO) and 970.8 mg g-1 towards Pb(II), much higher than that of many other adsorbents. Easy cyclic adsorption-desorption was another distinguishing feature of the nanoparticles, whose removal efficiency to these pollutants hardly varied after 10 cycles of regeneration. Interestingly, the resulting nanoparticles showed prominent antibacterial activity of 99.99% bacterial inhibitive rate against both gram-negative bacteria Escherichia coli (E. coli) and gram-positive bacteria Staphylococcus aureus (S. aureus). These results suggest that the resulting nanoparticles have great potential in the purification of the wastewater.
Collapse
|
25
|
Díez B, Sotto A, Martín A, Arsuaga J, Rosal R. Poly(vinyl chloride)-hyperbranched polyamidoamine ultrafiltration membranes with antifouling and antibiofouling properties. REACT FUNCT POLYM 2020; 154:104669. [DOI: 10.1016/j.reactfunctpolym.2020.104669] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
|
26
|
Saidin S, Jumat MA, Mohd Amin NAA, Saleh Al-Hammadi AS. Organic and inorganic antibacterial approaches in combating bacterial infection for biomedical application. Mater Sci Eng C Mater Biol Appl 2020; 118:111382. [PMID: 33254989 DOI: 10.1016/j.msec.2020.111382] [Citation(s) in RCA: 84] [Impact Index Per Article: 21.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/24/2020] [Revised: 08/06/2020] [Accepted: 08/07/2020] [Indexed: 02/01/2023]
Abstract
In spite of antibiotics, antibacterial agents or specifically known as antiseptics are actively explored for the prevention of infection-associated medical devices. Antibacterial agents are introduced to overcome the complication of bacterial resistance which devoted by antibiotics. It can be classified into inorganic and organic, that prominently have impacted bacterial retardation in their own killing mechanism patterns. Therefore, this review paper aimed to provide information on most common used inorganic and organic antibacterial agents which have potential to be utilized in biomedical applications, thus, classifying the trends of antibacterial mechanism on Gram-negative and Gram-positive bacteria. In the beginning, infectious diseases and associated biomedical infections were stated to expose current infection scenarios on medical devices. The general view, application, susceptible bacteria and activation mechanism of inorganic (silver, copper, gold and zinc) and organic (chlorhexidine, triclosan, polyaniline and polyethylenimine) antibacterial agents that are widely proposed for biomedical area, were then gathered and reviewed. In the latter part of the study, the intact mechanisms of inorganic and organic antibacterial agents in retarding bacterial growth were classified and summarized based on its susceptibility on Gram-negative and Gram-positive bacteria. Most of inorganic antibacterial agents are in the form of metal, which release its ions to retard prominently Gram-negative bacteria. While organic antibacterial agents are susceptible to Gram-positive bacteria through organelle modification and disturbance of bio-chemical pathway. However, the antibacterial effects of each antibacterial agent are also depending on its effective mechanism and the species of bacterial strain. These compilation reviews and classification mechanisms are beneficial to assist the selection of antibacterial agents to be incorporated on/within biomaterials, based on its susceptible bacteria. Besides, the combination of several antibacterial agents with different susceptibilities will cover a wide range of antibacterial spectrum.
Collapse
Affiliation(s)
- Syafiqah Saidin
- School of Biomedical Engineering & Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia; IJN-UTM Cardiovascular Engineering Centre, Institute for Human Centred Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
| | - Mohamad Amin Jumat
- School of Biomedical Engineering & Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
| | - Nur Ain Atiqah Mohd Amin
- Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
| | - Abdullah Sharaf Saleh Al-Hammadi
- School of Biomedical Engineering & Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
| |
Collapse
|
27
|
Balaure PC, Grumezescu AM. Recent Advances in Surface Nanoengineering for Biofilm Prevention and Control. Part II: Active, Combined Active and Passive, and Smart Bacteria-Responsive Antibiofilm Nanocoatings. Nanomaterials (Basel) 2020; 10:nano10081527. [PMID: 32759748 PMCID: PMC7466637 DOI: 10.3390/nano10081527] [Citation(s) in RCA: 32] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/28/2020] [Revised: 07/23/2020] [Accepted: 07/28/2020] [Indexed: 01/24/2023]
Abstract
The second part of our review describing new achievements in the field of biofilm prevention and control, begins with a discussion of the active antibiofilm nanocoatings. We present the antibiofilm strategies based on antimicrobial agents that kill pathogens, inhibit their growth, or disrupt the molecular mechanisms of biofilm-associated increase in resistance and tolerance. These agents of various chemical structures act through a plethora of mechanisms targeting vital bacterial metabolic pathways or cellular structures like cell walls and cell membranes or interfering with the processes that underlie different stages of the biofilm life cycle. We illustrate the latter action mechanisms through inhibitors of the quorum sensing signaling pathway, inhibitors of cyclic-di-GMP signaling system, inhibitors of (p)ppGpp regulated stringent response, and disruptors of the biofilm extracellular polymeric substances matrix (EPS). Both main types of active antibiofilm surfaces, namely non-leaching or contact killing systems, which rely on the covalent immobilization of the antimicrobial agent on the surface of the coatings and drug-releasing systems in which the antimicrobial agent is physically entrapped in the bulk of the coatings, are presented, highlighting the advantages of each coating type in terms of antibacterial efficacy, biocompatibility, selective toxicity, as well as drawbacks and limitations. Developments regarding combined strategies that join in a unique platform, both passive and active elements are not omitted. In such platforms with dual functionality, passive and active strategies can be applied either simultaneously or sequentially. We especially emphasize those systems that can be reversely and repeatedly switched between the non-fouling status and the bacterial killing status, thereby allowing several bacteria-killing/surface regeneration cycles to be performed without significant loss of the initial bactericidal activity. Eventually, smart antibiofilm coatings that release their antimicrobial payload on demand, being activated by various triggers such as changes in local pH, temperature, or enzymatic triggers, are presented. Special emphasis is given to the most recent trend in the field of anti-infective surfaces, specifically smart self-defensive surfaces for which activation and switch to the bactericidal status are triggered by the pathogens themselves.
Collapse
Affiliation(s)
- Paul Cătălin Balaure
- “Costin Nenitzescu” Department of Organic Chemistry, Faculty of Applied Chemistry and Materials Science, University Politehnica of Bucharest, G. Polizu Street 1–7, 011061 Bucharest, Romania;
| | - Alexandru Mihai Grumezescu
- Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science, University Politehnica of Bucharest, G. Polizu Street 1–7, 011061 Bucharest, Romania
- Correspondence: ; Tel.: +40-21-402-39-97
| |
Collapse
|
28
|
Gillman N, Lloyd D, Bindra R, Ruan R, Zheng M. Surgical applications of intracorporal tissue adhesive agents: current evidence and future development. Expert Rev Med Devices 2020; 17:443-460. [PMID: 32176853 DOI: 10.1080/17434440.2020.1743682] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
Abstract
Introduction: Traditional mechanical closure techniques pose many challenges including the risk of infection, tissue reaction, and injury to both patients and clinicians. There is an urgent need to develop tissue adhesive agents to reform closure technique. This review examined a variety of tissue adhesive agents available in the market in an attempt to gain a better understanding of intracorporal tissue adhesive agents as medical devices.Areas covered: Fundamental principles and clinical determinants of the tissue adhesives were summarized. The available tissue adhesives for intracorporal use and their relevant clinical evidence were then presented. Lastly, the perspective of future development for intracorporal tissue adhesive were discussed. Clinical evidence shows current agents are efficacious as adjunctive measures to mechanical closure and these agents have been trialed outside of clinical indications with varied results.Expert opinion: Despite some advancements in the development of tissue adhesives, there is still a demand to develop novel technologies in order to address unmet clinical needs, including low tensile strength in wet conditions, non-controllable polimerization and sub-optimal biocompatibility. Research trends focus on producing novel adhesive agents to remit these challenges. Examples include the development of biomimetic adhesives, externally activated adhesives, and multiple crosslinking strategies. Economic feasibility and biosafety are limiting factors for clinical implementation.
Collapse
Affiliation(s)
- Nicholas Gillman
- School of Medicine, Griffith University School of Medicine, Gold Coast, QLD, Australia.,Centre for Orthopaedic Research, Faculty of Health and Medical Sciences, University of Western Australia, Perth, WA, Australia
| | - David Lloyd
- Griffith Centre for Orthopaedic Research and Engineering, Menzies Health Institute, Gold Coast, QLD, Australia
| | - Randy Bindra
- School of Medicine, Griffith University School of Medicine, Gold Coast, QLD, Australia.,Department of Plastic and Reconstructive Surgery, Gold Coast University Hospital, Southport, QLD, Australia
| | - Rui Ruan
- Centre for Orthopaedic Research, Faculty of Health and Medical Sciences, University of Western Australia, Perth, WA, Australia.,Griffith Centre for Orthopaedic Research and Engineering, Menzies Health Institute, Gold Coast, QLD, Australia
| | - Minghao Zheng
- Centre for Orthopaedic Research, Faculty of Health and Medical Sciences, University of Western Australia, Perth, WA, Australia.,Perron Institute for Neurological and Translational Science, Nedlands, Western Australia, 6009, Australia
| |
Collapse
|
29
|
Abd Alhameed R, Almarhoon Z, Bukhari SI, El-Faham A, de la Torre BG, Albericio F. Synthesis and Antimicrobial Activity of a New Series of Thiazolidine-2,4-diones Carboxamide and Amino Acid Derivatives. Molecules 2019; 25:E105. [PMID: 31892119 DOI: 10.3390/molecules25010105] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/05/2019] [Revised: 12/18/2019] [Accepted: 12/25/2019] [Indexed: 12/11/2022] Open
Abstract
Novel thiazolidine-2,4-dione carboxamide and amino acid derivatives were synthesized in excellent yield using OxymaPure/N,N'-diisopropylcarbodimide coupling methodology and were characterized by chromatographic and spectrometric methods, and elemental analysis. The antimicrobial and antifungal activity of these derivatives was evaluated against two Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis), two-Gram negative bacteria (Escherichia coli and Pseudomonas aeruginosa), and one fungal isolate (Candida albicans). Interestingly, several samples demonstrated weak to moderate antibacterial activity against Gram-negative bacteria, as well as antifungal activity. However, only one compound namely, 2-(5-(3-methoxybenzylidene)-2,4-dioxothiazolidin-3-yl)acetic acid, showed antibacterial activity against Gram-positive bacteria, particularly S. aureus.
Collapse
|
30
|
You M, Li W, Pan Y, Fei P, Wang H, Zhang W, Zhi L, Meng J. Preparation and characterization of antibacterial polyamine-based cyclophosphazene nanofiltration membranes. J Memb Sci 2019; 592:117371. [DOI: 10.1016/j.memsci.2019.117371] [Citation(s) in RCA: 34] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
|
31
|
Tóth V, Hermann P, Végh D, Zelles T, Géczi Z. Study of the Intrinsic Fluorescence of a Highly Branched Cationic Dendrimer, Poly(Ethyleneimine) (PEI). Molecules 2019; 24:E3690. [PMID: 31615035 DOI: 10.3390/molecules24203690] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/25/2019] [Revised: 10/10/2019] [Accepted: 10/11/2019] [Indexed: 11/26/2022] Open
Abstract
Poly(ethyleneimine) (PEI) is a weakly basic, synthetic, polycationic polymer, due to the presence of primary, secondary, and tertiary amino groups. The amino groups are responsible for the variety of applications of PEI (e.g., transfection, bioimaging, solar cell, etc.). Our study presents some new and reproducible methods for the quantification of molecular or mass concentration of highly branched PEI of different molecular weights (800–2000–25,000–750,000 MW PEI). In the course of the direct method, spectrophotometry and fluorometry were applied to determine the absorption and fluorescence of PEI dilution series. An increase in the MW at the same concentration produces a higher count number because of the higher number of amino groups in PEI molecules. The character of increment in fluorescence intensity is essentially different in the case of mass concentrations and molar concentrations. The increment of the fluorescence intensity related to the molar concentration is non-linear. In the case of mass concentration, the slope is linear. Moreover, their fluorescence is enhanced with the decrease in pH values. The spectrophotometry is a reliable method for measuring the quantity of PEI molecules in solution. Our data help in recognizing the detailed properties of PEI in dendrimer research.
Collapse
|
32
|
Xu H, Teng F, Zhou F, Zhu L, Wen Y, Feng R, Song Z. Linolenic acid-modified MPEG-PEI micelles for encapsulation of amphotericin B. Future Med Chem 2019; 11:2647-62. [PMID: 31621420 DOI: 10.4155/fmc-2018-0580] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022] Open
Abstract
Aim: To encapsulate amphotericin B (AmB) with reduced toxicity and comparable activity. Results & methodology: The α-linolenic acid (ALA)-modified monomethoxy polyethylene glycol-g-PEI-g-ALA conjugate was employed to prepare AmB-loaded micelles (AmB-M). In vitro activity and release behavior of AmB-M were investigated. AmB-M enhanced AmB's water-solubility to 1.2 mg/ml, showing good storage stability. AmB-M could achieve a sustained and slow release of AmB, low hemolysis activity and negligible kidney toxicity when compared with commercial AmB injection. Antifungal activity and biofilm inhibition experiments confirmed that the antifungal activity of AmB-M against Candida albicans was similar to that of AmB injection. Conclusion: Monomethoxy polyethylene glycol-g-PEI-g-ALA micelles could be a preferable choice to treat systemic fungal infections as an efficient drug delivery system.
Collapse
|
33
|
Jiang T, Xie Z, Wu F, Chen J, Liao Y, Liu L, Zhao A, Wu J, Yang P, Huang N. Hyaluronic Acid Nanoparticle Composite Films Confer Favorable Time-Dependent Biofunctions for Vascular Wound Healing. ACS Biomater Sci Eng 2019; 5:1833-1848. [PMID: 33405557 DOI: 10.1021/acsbiomaterials.9b00295] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
Vascular stent implantation is the primary treatment for coronary artery disease. Surface modification of coronary stents is a topic of interest to prevent thrombosis and restenosis and to promote endothelization. However, bioactive coatings on implants have not yet been fully developed for the time-ordered biological requirements of vascular stents. The first month after vascular stent implantation, the pathological changes in the injured vascular tissue are complex and time-ordered. Therefore, vascular stents possess time-dependent biofunctions with early phase anticoagulant and anti-inflammatory properties. In the later stage, inhibitory effects on smooth muscle cell proliferation and the promotion of endothelial cell adhesion might meet the requirements of vascular repair. We fabricated three types of hyaluronic acid nanoparticles (HA-NPs) by subjecting HA and poly(ether imide) to ethyl(dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide coupling reaction. The HA-NPs prepared by HA with a molecular weight of 100 kDa showed the best stability in a hyaluronidase environment. HA-NP composite films (HA-NCFs) were then fabricated by coimmobilizing selected HA-NPs (100 kDa) and HA molecules (100 kDa) through amide reaction on PDA/HD coated 316 L stainless steel surfaces. The detachment behavior of HA-NPs (100 kDa) in PBS for 20 days indicated that the HA-NPs (100 kDa) gradually detached from the surface. In vitro tests (anticoagulant and anti-inflammatory tests, endothelial cells, and smooth muscle cells seeding, and bacterial adhesion test) indicated that the newly fabricated HA-NCFs have inhibitory effects on the adhesion of fibrinogen, platelets, macrophages, bacteria, SMCs, and ECs. As the HA-NPs detached from the surface, the HA-NCFs showed excellent gradual comprehensive biocompatibility, which promoted adhesion and proliferation of ECs while still exerting inhibitory effects on the platelets, macrophages, and SMCs. Finally, in vivo SS wire implantation test (aortic implantation in healthy Sprague-Dawley rats) showed that HA-NCFs possessed anti-inflammatory properties, inhibited the proliferation of smooth muscle cells, and promoted re-endothelialization. In particular, HA-NCFs with time-dependent biofunctions showed better antirestenosis effects than those of surfaces modified with molecular HA, which exhibited constant biocompatibility. This study provides an important basis for the construction of HA-NP composite films with favorable time-dependent biofunctions for the time-ordered biological requirements of vascular stent.
Collapse
Affiliation(s)
- Ting Jiang
- School of Life Science and Engineering, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China.,Institute of Biomaterials and Surface Engineering, Key Lab. for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| | - Zhou Xie
- Institute of Biomaterials and Surface Engineering, Key Lab. for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| | - Feng Wu
- Institute of Biomaterials and Surface Engineering, Key Lab. for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| | - Jiang Chen
- Institute of Biomaterials and Surface Engineering, Key Lab. for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| | - Yuzhen Liao
- Institute of Biomaterials and Surface Engineering, Key Lab. for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| | - Luying Liu
- Institute of Biomaterials and Surface Engineering, Key Lab. for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| | - Ansha Zhao
- Institute of Biomaterials and Surface Engineering, Key Lab. for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| | - Jian Wu
- School of Life Science and Engineering, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| | - Ping Yang
- Institute of Biomaterials and Surface Engineering, Key Lab. for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| | - Nan Huang
- Institute of Biomaterials and Surface Engineering, Key Lab. for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University, No. 111 of the North First Section of Second Ring Road, Chengdu 610031, PR China
| |
Collapse
|
34
|
Abdallah H, Taman R, Elgayar D, Farag H. Antibacterial blend polyvinylidene fluoride/polyethyleneimine membranes for salty oil emulsion separation. Eur Polym J 2018. [DOI: 10.1016/j.eurpolymj.2018.09.035] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
35
|
Shim JS, Park DS, Baek DH, Jha N, Park SI, Yun HJ, Kim WJ, Ryu JJ. Antimicrobial activity of NO-releasing compounds against periodontal pathogens. PLoS One 2018; 13:e0199998. [PMID: 30286117 PMCID: PMC6171828 DOI: 10.1371/journal.pone.0199998] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2017] [Accepted: 06/18/2018] [Indexed: 11/19/2022] Open
Abstract
This study describes the successful synthesis of nitric oxide (NO)-releasing compounds with biodegradable and injectable properties and demonstrates that the kinetics of NO release vary according to the type of NO donor. The antimicrobial activity of NO-releasing compounds against three common periodontal pathogens, i.e., Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, and Actinomyces israelii, was investigated using a susceptibility assay. Human gingival fibroblasts were treated with NO-releasing compounds at the minimum concentrations required for bacterial growth and cytotoxicity was evaluated using the MTT cell proliferation assay. Our results suggest that NO-releasing compounds can be used topically to treat both gram-negative and gram-positive periodontal pathogens. Comparison of the antimicrobial activity and cytotoxicity assay results between the NO-releasing compounds revealed that an NO donor comprising a macromolecule without surface charge, a lower instantaneous NO concentration, and an adequate supply of NO were associated with a strong bactericidal effect and low cytotoxicity. NO-releasing compounds with these properties may be suitable for treatment of periodontitis.
Collapse
Affiliation(s)
- Ji Suk Shim
- Department of Dentistry, Korea University Ansan Hospital, Ansan-si, Republic of Korea
| | - Dong-sik Park
- Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea
| | - Dong-Heon Baek
- Department of Oral Microbiology and immunology, College of Dentistry, Dankook University, Cheonan, Republic of Korea
| | - Nayansi Jha
- Korea University Graduate School, Seoul, Republic of Korea
| | - Serk In Park
- Department of Biochemistry and Molecular Biology, Korea University College of Medicine, Seoul, Republic of Korea
| | - Hyoung Jin Yun
- Department of Oral Microbiology and immunology, College of Dentistry, Dankook University, Cheonan, Republic of Korea
| | - Won Jong Kim
- Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea
| | - Jae Jun Ryu
- Department of Dentistry, Korea University Anam Hospital, Seoul, Republic of Korea
| |
Collapse
|
36
|
Clark SR, Lee KY, Lee H, Khetan J, Kim HC, Choi YH, Shin K, Won YY. Determining the effects of PEI adsorption on the permeability of 1,2-dipalmitoylphosphatidylcholine/bis(monoacylglycero)phosphate membranes under osmotic stress. Acta Biomater 2018; 65:317-26. [PMID: 29054822 DOI: 10.1016/j.actbio.2017.10.027] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/26/2017] [Revised: 10/12/2017] [Accepted: 10/16/2017] [Indexed: 12/26/2022]
Abstract
Polycations are used for a number of biological applications, including antibiotics and gene therapy. One aspect of the use of polycation gene carriers such as polyethylenemine (PEI) in gene therapy that is not well understood is their ability to escape from the vesicles they are internalized in. Here, in an attempt to gain a better understanding of PEI interaction with endosomal lipids under osmotic stress, we performed investigations using monolayers and vesicles derived from a mixture of neutral and negative lipids (1,2-dipalmitoylphosphatidylcholine (DPPC) and bis(monoacylglycero)phosphate (BMP), respectively). X-ray reflectivity (XR) and Langmuir trough measurements confirmed PEI adsorption to the negatively charged membrane. Confocal microscopy imaging indicated that PEI adsorption actually increases the overall integrity of the DPPC/BMP vesicle against osmotic stresses while also causing overall deformation and permeabilization of the lipid membrane, thus leading to leakage of contents from the interior of the vesicle. These confocal microscopy observations were also supported by data gathered by dynamic light scattering (DLS). STATEMENT OF SIGNIFICANCE In recent decades, researchers have investigated polyamine-based gene delivery systems as useful alternatives to viral gene carriers. One step that is crucial to the performance of polyamine gene carriers such as polyethylenemine (PEI) is escape from late endosomal vesicles during intracellular delivery. However, the ability of polyamine/DNA polyplexes to effectively escape from endosomes is a little-understood part of the gene therapy techniques that use these polyplexes. Here, we performed investigations using monolayers and vesicles derived from a mixture of neutral and negative lipids (1,2-dipalmitoylphosphatidylcholine (DPPC) and bis(monoacylglycero)phosphate (BMP), respectively) as model systems for late endosomes in order to examine the interactions of PEI with the DPPC/BMP membranes and study the subsequent effects on the stability and permeability of these membranes.
Collapse
|
37
|
Mottais A, Le Gall T, Sibiril Y, Ravel J, Laurent V, d'Arbonneau F, Montier T. Enhancement of lung gene delivery after aerosol: a new strategy using non-viral complexes with antibacterial properties. Biosci Rep 2017; 37:BSR20160618. [PMID: 29046368 DOI: 10.1042/BSR20160618] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2017] [Revised: 10/09/2017] [Accepted: 10/10/2017] [Indexed: 02/06/2023] Open
Abstract
The pathophysiology of obstructive pulmonary diseases, such as cystic fibrosis (CF), leads to the development of chronic infections in the respiratory tract. Thus, the symptomatic management of the disease requires, in particular, repetitive antibiotherapy. Besides these antibacterial treatments, certain pathologies, such as CF or chronic obstructive pulmonary disease (COPD), require the intake of many drugs. This simultaneous absorption may lead to undesirable drug interactions. For example, Orkambi® (lumacaftor/Ivacaftor, Vertex), a pharmacological drug employed to treat F508del patients, cannot be used with antibiotics such as rifampicin or rifabutin (rifamycin family) which are necessary to treat Mycobacteriaceae. As far as gene therapy is concerned, bacteria and/or biofilm in the airways present an additional barrier for gene transfer. Thus, aerosol administration of nanoparticles have to overcome many obstacles before allowing cellular penetration of therapeutic compounds. This review focusses on the development of aerosol formulations adapted to the respiratory tract and its multiple barriers. Then, formulations that are currently used in clinical applications are summarized depending on the active molecule delivered. Finally, we focus on new therapeutic approaches to reduce possible drug interactions by transferring the antibacterial activity to the nanocarrier while ensuring the transfection efficiency.
Collapse
|
38
|
Abstract
Despite an array of cogent antibiotics, bacterial infections, notably those produced by nosocomial pathogens, still remain a leading factor of morbidity and mortality around the globe. They target the severely ill, hospitalized and immunocompromised patients with incapacitated immune system, who are prone to infections. The choice of antimicrobial therapy is largely empirical and not devoid of toxicity, hypersensitivity, teratogenicity and/or mutagenicity. The emergence of multidrug-resistant bacteria further intensifies the clinical predicament as it directly impacts public health due to diminished potency of current antibiotics. In addition, there is an escalating concern with respect to biofilm-associated infections that are refractory to the presently available antimicrobial armory, leaving almost no therapeutic option. Hence, there is a dire need to develop alternate antibacterial agents. The past decade has witnessed a substantial upsurge in the global use of nanomedicines as innovative tools for combating the high rates of antimicrobial resistance. Antibacterial activity of metal and metal oxide nanoparticles (NPs) has been extensively reported. The microbes are eliminated either by microbicidal effects of the NPs, such as release of free metal ions culminating in cell membrane damage, DNA interactions or free radical generation, or by microbiostatic effects coupled with killing potentiated by the host's immune system. This review encompasses the magnitude of multidrug resistance in nosocomial infections, bacterial evasion of the host immune system, mechanisms used by bacteria to develop drug resistance and the use of nanomaterials based on metals to overcome these challenges. The diverse annihilative effects of conventional and biogenic metal NPs for antibacterial activity are also discussed. The use of polymer-based nanomaterials and nanocomposites, alone or functionalized with ligands, antibodies or antibiotics, as alternative antimicrobial agents for treating severe bacterial infections is also discussed. Combinatorial therapy with metallic NPs, as adjunct to the existing antibiotics, may aid to restrain the mounting menace of bacterial resistance and nosocomial threat.
Collapse
Affiliation(s)
- Hassan A Hemeg
- Department of Medical Laboratories Technology, Faculty of Applied Medical Sciences, Taibah University, Medina, Kingdom of Saudi Arabia
| |
Collapse
|
39
|
Mendoza García MA, Izadifar M, Chen X. Evaluation of PBS Treatment and PEI Coating Effects on Surface Morphology and Cellular Response of 3D-Printed Alginate Scaffolds. J Funct Biomater 2017; 8:E48. [PMID: 29104215 DOI: 10.3390/jfb8040048] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/29/2017] [Revised: 10/10/2017] [Accepted: 10/28/2017] [Indexed: 12/20/2022] Open
Abstract
Three-dimensional (3D) printing is an emerging technology for the fabrication of scaffolds to repair/replace damaged tissue/organs in tissue engineering. This paper presents our study on 3D printed alginate scaffolds treated with phosphate buffered saline (PBS) and polyethyleneimine (PEI) coating and their impacts on the surface morphology and cellular response of the printed scaffolds. In our study, sterile alginate was prepared by means of the freeze-drying method and then, used to prepare the hydrogel for 3D printing into calcium chloride, forming 3D scaffolds. Scaffolds were treated with PBS for a time period of two days and seven days, respectively, and PEI coating; then they were seeded with Schwann cells (RSC96) for the examination of cellular response (proliferation and differentiation). In addition, swelling and stiffness (Young’s modulus) of the treated scaffolds was evaluated, while their surface morphology was assessed using scanning electron microscopy (SEM). SEM images revealed significant changes in scaffold surface morphology due to degradation caused by the PBS treatment over time. Our cell proliferation assessment over seven days showed that a two-day PBS treatment could be more effective than seven-day PBS treatment for improving cell attachment and elongation. While PEI coating of alginate scaffolds seemed to contribute to cell growth, Schwann cells stayed round on the surface of alginate over the period of cell culture. In conclusion, PBS-treatment may offer the potential to induce surface physical cues due to degradation of alginate, which could improve cell attachment post cell-seeding of 3D-printed alginate scaffolds.
Collapse
|
40
|
Sahiner N, Sagbas S, Sahiner M, Ayyala RS. Polyethyleneimine modified poly(Hyaluronic acid) particles with controllable antimicrobial and anticancer effects. Carbohydr Polym 2017; 159:29-38. [DOI: 10.1016/j.carbpol.2016.12.024] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2016] [Revised: 12/06/2016] [Accepted: 12/08/2016] [Indexed: 12/19/2022]
|
41
|
Hernandez-Montelongo J, Lucchesi E, Nascimento V, França C, Gonzalez I, Macedo W, Machado D, Lancellotti M, Moraes A, Beppu M, Cotta M. Antibacterial and non-cytotoxic ultra-thin polyethylenimine film. Materials Science and Engineering: C 2017; 71:718-724. [DOI: 10.1016/j.msec.2016.10.064] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/04/2016] [Revised: 09/28/2016] [Accepted: 10/24/2016] [Indexed: 10/20/2022]
|
42
|
Jabeur I, Tobaldini F, Martins N, Barros L, Martins I, Calhelha RC, Henriques M, Silva S, Achour L, Santos-Buelga C, Ferreira ICFR. Bioactive properties and functional constituents of Hypericum androsaemum L.: A focus on the phenolic profile. Food Res Int 2016; 89:422-431. [PMID: 28460934 DOI: 10.1016/j.foodres.2016.08.040] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/08/2016] [Revised: 08/18/2016] [Accepted: 08/26/2016] [Indexed: 11/26/2022]
Abstract
Hypericum androsaemum L. ethanol:water extract acted as a lipid peroxidation inhibitor and free radical scavenger. A marked inhibition of the growth of breast, lung, cervical and hepatocellular human carcinoma cell lines was also observed, whereas no toxicity was shown against non-tumor porcine liver cells (>400μg/mL). The extract was also effective in inhibiting nitric oxide production, as an indicator of the anti-inflammatory potential. The anti-Candida effects varied among different strains of the same species, C. glabrata and C. tropicalis being the most sensible species with an effect directly related with the extract concentrations tested. A significant anti-biofilm formation potential was also observed, namely for C. glabrata and C. tropicalis (biofilm reduction >90%). 5-O-Caffeoylquinic and 3-O-caffeoylquinic acids were the most abundant phenolic compounds identified in the extract, and might be related with the observed bioactive effects. Nevertheless, future studies should be carried out to obtain dose-response curves of the isolated active compounds, in order to perform further pre-clinically testing to quantify the presence of the most active compounds in the extract.
Collapse
Affiliation(s)
- Inés Jabeur
- Mountain Research Centre (CIMO), ESA, Polytechnic Institute of Bragança, Campus de Santa Apolónia, 1172, 5300-253 Bragança, Portugal; Laboratoire de Recherche "Bioressources: Biologie Intégrative & Valorisation", Institut Supérieur de Biotechnologie de Monastir, Avenue Tahar Hadded, BP 74, Université de Monastir, 5000 Monastir, Tunisia
| | - Flávia Tobaldini
- CEB - Centre of Biological Engineering, LIBRO-Laboratório de Investigação em Biofilmes Rosário Oliveira, University of Minho, 4710-057 Braga, Portugal; Laboratory of Medical Mycology, Department of Clinical Analysis and Biomedicine, Universidade Estadual de Maringá, Maringá, PR, Brazil
| | - Natália Martins
- Mountain Research Centre (CIMO), ESA, Polytechnic Institute of Bragança, Campus de Santa Apolónia, 1172, 5300-253 Bragança, Portugal; CEB - Centre of Biological Engineering, LIBRO-Laboratório de Investigação em Biofilmes Rosário Oliveira, University of Minho, 4710-057 Braga, Portugal
| | - Lillian Barros
- Mountain Research Centre (CIMO), ESA, Polytechnic Institute of Bragança, Campus de Santa Apolónia, 1172, 5300-253 Bragança, Portugal; Laboratory of Separation and Reaction Engineering - Laboratory of Catalysis and Materials (LSRE-LCM), Polytechnic Institute of Bragança, Campus de Santa Apolónia, 1134, 5301-857 Bragança, Portugal
| | - Ivone Martins
- CEB - Centre of Biological Engineering, LIBRO-Laboratório de Investigação em Biofilmes Rosário Oliveira, University of Minho, 4710-057 Braga, Portugal
| | - Ricardo C Calhelha
- Mountain Research Centre (CIMO), ESA, Polytechnic Institute of Bragança, Campus de Santa Apolónia, 1172, 5300-253 Bragança, Portugal
| | - Mariana Henriques
- CEB - Centre of Biological Engineering, LIBRO-Laboratório de Investigação em Biofilmes Rosário Oliveira, University of Minho, 4710-057 Braga, Portugal
| | - Sónia Silva
- Laboratoire de Recherche "Bioressources: Biologie Intégrative & Valorisation", Institut Supérieur de Biotechnologie de Monastir, Avenue Tahar Hadded, BP 74, Université de Monastir, 5000 Monastir, Tunisia.
| | - Lotfi Achour
- Laboratoire de Recherche "Bioressources: Biologie Intégrative & Valorisation", Institut Supérieur de Biotechnologie de Monastir, Avenue Tahar Hadded, BP 74, Université de Monastir, 5000 Monastir, Tunisia
| | - Celestino Santos-Buelga
- Grupo de Investigación en Polifenoles (GIP-USAL), Faculty of Pharmacy, University of Salamanca, Campus Miguel de Unamuno, 37007 Salamanca, Spain
| | - Isabel C F R Ferreira
- Mountain Research Centre (CIMO), ESA, Polytechnic Institute of Bragança, Campus de Santa Apolónia, 1172, 5300-253 Bragança, Portugal.
| |
Collapse
|
43
|
Voltan AR, Quindós G, Alarcón KPM, Fusco-Almeida AM, Mendes-Giannini MJS, Chorilli M. Fungal diseases: could nanostructured drug delivery systems be a novel paradigm for therapy? Int J Nanomedicine 2016; 11:3715-30. [PMID: 27540288 PMCID: PMC4982498 DOI: 10.2147/ijn.s93105] [Citation(s) in RCA: 71] [Impact Index Per Article: 8.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023] Open
Abstract
Invasive mycoses are a major problem for immunocompromised individuals and patients in intensive care units. Morbidity and mortality rates of these infections are high because of late diagnosis and delayed treatment. Moreover, the number of available antifungal agents is low, and there are problems with toxicity and resistance. Alternatives for treating invasive fungal infections are necessary. Nanostructured systems could be excellent carriers for antifungal drugs, reducing toxicity and targeting their action. The use of nanostructured systems for antifungal therapy began in the 1990s, with the appearance of lipid formulations of amphotericin B. This review encompasses different antifungal drug delivery systems, such as liposomes, carriers based on solid lipids and nanostructure lipids, polymeric nanoparticles, dendrimers, and others. All these delivery systems have advantages and disadvantages. Main advantages are the improvement in the antifungal properties, such as bioavailability, reduction in toxicity, and target tissue, which facilitates innovative therapeutic techniques. Conversely, a major disadvantage is the high cost of production. In the near future, the use of nanosystems for drug delivery strategies can be used for delivering peptides, including mucoadhesive systems for the treatment of oral and vaginal candidiasis.
Collapse
Affiliation(s)
- Aline Raquel Voltan
- Department of Drugs and Medicines, Faculty of Pharmaceutical Sciences, Univ. Estadual Paulista, Araraquara, Sao Paulo, Brazil
| | - Guillermo Quindós
- Immunology, Microbiology, and Parasitology Department, Facultad de Medicina y Odontología, Universidad del País Vasco, Bilbao, Spain
| | - Kaila P Medina Alarcón
- Department of Clinical Analysis, Faculdade de Ciências Farmacêuticas, Univ. Estadual Paulista, Araraquara, Sao Paulo, Brazil
| | - Ana Marisa Fusco-Almeida
- Department of Clinical Analysis, Faculdade de Ciências Farmacêuticas, Univ. Estadual Paulista, Araraquara, Sao Paulo, Brazil
| | | | - Marlus Chorilli
- Department of Drugs and Medicines, Faculty of Pharmaceutical Sciences, Univ. Estadual Paulista, Araraquara, Sao Paulo, Brazil
| |
Collapse
|
44
|
Aelenei P, Miron A, Trifan A, Bujor A, Gille E, Aprotosoaie AC. Essential Oils and Their Components as Modulators of Antibiotic Activity against Gram-Negative Bacteria. Medicines (Basel) 2016; 3:medicines3030019. [PMID: 28930130 PMCID: PMC5456245 DOI: 10.3390/medicines3030019] [Citation(s) in RCA: 34] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/30/2016] [Revised: 07/17/2016] [Accepted: 07/18/2016] [Indexed: 12/21/2022]
Abstract
Gram-negative bacteria cause infections that are difficult to treat due to the emergence of multidrug resistance. This review summarizes the current status of the studies investigating the capacity of essential oils and their components to modulate antibiotic activity against Gram-negative bacteria. Synergistic interactions are particularly discussed with reference to possible mechanisms by which essential oil constituents interact with antibiotics. Special emphasis is given to essential oils and volatile compounds that inhibit efflux pumps, thus reversing drug resistance in Gram-negative bacteria. In addition, indifference and antagonism between essential oils/volatile compounds and conventional antibiotics have also been reported. Overall, this literature review reveals that essential oils and their purified components enhance the efficacy of antibiotics against Gram-negative bacteria, being promising candidates for the development of new effective formulations against Gram-negative bacteria.
Collapse
Affiliation(s)
- Petruta Aelenei
- Department of Pharmacognosy, Faculty of Pharmacy, University of Medicine and Pharmacy Grigore T. Popa-Iasi, Universitatii 16, Iasi 700115, Romania.
- Regulatory Affairs Department, Fiterman Pharma LLC, Pacurari Road 127, Iasi 700544, Romania.
| | - Anca Miron
- Department of Pharmacognosy, Faculty of Pharmacy, University of Medicine and Pharmacy Grigore T. Popa-Iasi, Universitatii 16, Iasi 700115, Romania.
| | - Adriana Trifan
- Department of Pharmacognosy, Faculty of Pharmacy, University of Medicine and Pharmacy Grigore T. Popa-Iasi, Universitatii 16, Iasi 700115, Romania.
| | - Alexandra Bujor
- Department of Pharmacognosy, Faculty of Pharmacy, University of Medicine and Pharmacy Grigore T. Popa-Iasi, Universitatii 16, Iasi 700115, Romania.
| | - Elvira Gille
- Stejarul Biological Research Centre/National Institute of Research and Development for Biological Sciences, Alexandru cel Bun 6, Piatra Neamt 610004, Romania.
| | - Ana Clara Aprotosoaie
- Department of Pharmacognosy, Faculty of Pharmacy, University of Medicine and Pharmacy Grigore T. Popa-Iasi, Universitatii 16, Iasi 700115, Romania.
| |
Collapse
|
45
|
Xu D, Wang Q, Yang T, Cao J, Lin Q, Yuan Z, Li L. Polyethyleneimine Capped Silver Nanoclusters as Efficient Antibacterial Agents. Int J Environ Res Public Health 2016; 13:E334. [PMID: 26999183 PMCID: PMC4808997 DOI: 10.3390/ijerph13030334] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/02/2016] [Revised: 03/13/2016] [Accepted: 03/14/2016] [Indexed: 11/16/2022]
Abstract
Development of efficient antibacterial agents is critical for human health. In the present study, we investigated the antibacterial activity of polyethyleneimine (PEI)-capped silver nanoclusters (PEI-AgNCs), based on the fact that nanoclusters normally have higher surface-to-volume ratios than traditional nanomaterials and PEI itself has a strong antimicrobial capacity. We synthesized stable silver nanoclusters by altering PEI molecular weight from 0.6 kDa to 25 kDa and characterized them by UV-Vis absorption and fluorescence spectroscopy and high resolution transmission electron microscopy. The sizes of AgNCs were around 2 nm in diameter and were little influenced by the molecular weight of PEIs. The antibacterial abilities of the four PEI-AgNCs were explored on agar plate and in liquid systems. Our results revealed that the antibacterial activity of PEI-AgNCs is excellent and the reduction of PEI molecular weight could result in the increased antibacterial capacity of PEI-AgNCs. Such proposed new materials might be useful as efficient antibacterial agents in practical clinical applications.
Collapse
Affiliation(s)
- Dong Xu
- National Engineering Laboratory for Rice and By-Products Further Processing, Central South University of Forestry & Technology, Changsha 410004, China.
| | - Qingyun Wang
- National Engineering Laboratory for Rice and By-Products Further Processing, Central South University of Forestry & Technology, Changsha 410004, China.
| | - Tao Yang
- National Engineering Laboratory for Rice and By-Products Further Processing, Central South University of Forestry & Technology, Changsha 410004, China.
| | - Jianzhong Cao
- National Engineering Laboratory for Rice and By-Products Further Processing, Central South University of Forestry & Technology, Changsha 410004, China.
| | - Qinlu Lin
- National Engineering Laboratory for Rice and By-Products Further Processing, Central South University of Forestry & Technology, Changsha 410004, China.
| | - Zhiqin Yuan
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China.
| | - Le Li
- Hunan Ehome Health Technology Inc., Buliding 6# 1715, LvDi Central Square, Yuelu District, Changsha 410023, China.
| |
Collapse
|
46
|
Abstract
Microbes form surface-adherent community structures called biofilms and these biofilms play a critical role in infection.
Collapse
Affiliation(s)
- Shariq Qayyum
- Medical Microbiology and Molecular Biology Laboratory
- Interdisciplinary Biotechnology Unit
- Aligarh Muslim University
- Aligarh
- India
| | - Asad U. Khan
- Medical Microbiology and Molecular Biology Laboratory
- Interdisciplinary Biotechnology Unit
- Aligarh Muslim University
- Aligarh
- India
| |
Collapse
|
47
|
Reshamwala SMS, Mamidipally C, Pissurlenkar RRS, Coutinho EC, Noronha SB. Evaluation of risedronate as an antibiofilm agent. J Med Microbiol 2016; 65:9-18. [DOI: 10.1099/jmm.0.000193] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022] Open
Affiliation(s)
- Shamlan M. S. Reshamwala
- Department of Biosciences and Bioengineering, Indian Institute of Technology Bombay, Mumbai, India
| | | | - Raghuvir R. S. Pissurlenkar
- Molecular Simulations Group, Department of Pharmaceutical Chemistry, Goa College of Pharmacy, , Panaji, India
| | - Evans C. Coutinho
- Department of Pharmaceutical Chemistry, Bombay College of Pharmacy, , Mumbai, India
| | - Santosh B. Noronha
- Department of Chemical Engineering, Indian Institute of Technology Bombay, Mumbai, India
| |
Collapse
|
48
|
Ivanova K, Fernandes MM, Francesko A, Mendoza E, Guezguez J, Burnet M, Tzanov T. Quorum-Quenching and Matrix-Degrading Enzymes in Multilayer Coatings Synergistically Prevent Bacterial Biofilm Formation on Urinary Catheters. ACS Appl Mater Interfaces 2015; 7:27066-27077. [PMID: 26593217 DOI: 10.1021/acsami.5b09489] [Citation(s) in RCA: 88] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Bacteria often colonize in-dwelling medical devices and grow as complex biofilm communities of cells embedded in a self-produced extracellular polymeric matrix, which increases their resistance to antibiotics and the host immune system. During biofilm growth, bacterial cells cooperate through specific quorum-sensing (QS) signals. Taking advantage of this mechanism of biofilm formation, we hypothesized that interrupting the communication among bacteria and simultaneously degrading the extracellular matrix would inhibit biofilm growth. To this end, coatings composed of the enzymes acylase and α-amylase, able to degrade bacterial QS molecules and polysaccharides, respectively, were built on silicone urinary catheters using a layer-by-layer deposition technique. Multilayer coatings of either acylase or amylase alone suppressed the biofilm formation of corresponding Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus. Further assembly of both enzymes in hybrid nanocoatings resulted in stronger biofilm inhibition as a function of acylase or amylase position in the layers. Hybrid coatings, with the QS-signal-degrading acylase as outermost layer, demonstrated 30% higher antibiofilm efficiency against medically relevant Gram-negative bacteria compared to that of the other assemblies. These nanocoatings significantly reduced the occurrence of single-species (P. aeruginosa) and mixed-species (P. aeruginosa and Escherichia coli) biofilms on silicone catheters under both static and dynamic conditions. Moreover, in an in vivo animal model, the quorum quenching and matrix degrading enzyme assemblies delayed the biofilm growth up to 7 days.
Collapse
Affiliation(s)
- Kristina Ivanova
- Group of Molecular and Industrial Biotechnology, Department of Chemical Engineering, Universitat Politècnica de Catalunya , Rambla Sant Nebridi 22, 08222 Terrassa, Spain
| | - Margarida M Fernandes
- Group of Molecular and Industrial Biotechnology, Department of Chemical Engineering, Universitat Politècnica de Catalunya , Rambla Sant Nebridi 22, 08222 Terrassa, Spain
| | - Antonio Francesko
- Group of Molecular and Industrial Biotechnology, Department of Chemical Engineering, Universitat Politècnica de Catalunya , Rambla Sant Nebridi 22, 08222 Terrassa, Spain
| | - Ernest Mendoza
- Laboratory of Applied Nanomaterials, Center for Research in NanoEngineering, Universitat Politècnica de Catalunya , c/Pascual I Vila 15, 08028 Barcelona, Spain
| | - Jamil Guezguez
- Synovo GmbH , Paul Ehrlich 15, D-72076 Tübingen, Germany
| | - Michael Burnet
- Synovo GmbH , Paul Ehrlich 15, D-72076 Tübingen, Germany
| | - Tzanko Tzanov
- Group of Molecular and Industrial Biotechnology, Department of Chemical Engineering, Universitat Politècnica de Catalunya , Rambla Sant Nebridi 22, 08222 Terrassa, Spain
| |
Collapse
|
49
|
Voulgaris I, Finka G, Uden M, Hoare M. Enhancing the selective extracellular location of a recombinant E. coli domain antibody by management of fermentation conditions. Appl Microbiol Biotechnol 2015; 99:8441-53. [PMID: 26184976 DOI: 10.1007/s00253-015-6799-3] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/21/2015] [Revised: 06/22/2015] [Accepted: 06/24/2015] [Indexed: 01/26/2023]
Abstract
The preparation of a recombinant protein using Escherichia coli often involves a challenging primary recovery sequence. This is due to the inability to secrete the protein to the extracellular space without a significant degree of cell lysis. This results in the release of nucleic acids, leading to a high viscosity, difficulty to clarify, broth and also to contamination with cell materials such as lipopolysaccharides and host cell proteins. In this paper, we present different fermentation strategies to facilitate the recovery of a V H domain antibody (13.1 kDa) by directing it selectively to the extracellular space and changing the balance between domain antibody to nucleic acid release. The manipulation of the cell growth rate in order to increase the outer cell membrane permeability gave a small ~1.5-fold improvement in released domain antibody to nucleic acid ratio without overall loss of yield. The introduction during fermentation of release agents such as EDTA gave no improvement in the ratio of released domain antibody to nucleic acid and a loss of overall productivity. The use of polyethyleneimine (PEI) during fermentation was with the aim to (a) permeabilise the outer bacterial membrane to release selectively domain antibody and (b) remove selectively by precipitation nucleic acids released during cell lysis. This strategy resulted in up to ~4-fold increase in the ratio of domain antibody to soluble nucleic acid with no reduction in domain antibody overall titre. In addition, a reduction in host cell protein contamination was achieved and there was no increase in endotoxin levels. Similar results were demonstrated with a range of other antibody products prepared in E. coli.
Collapse
|
50
|
Salli KM, Ouwehand AC. The use of in vitro model systems to study dental biofilms associated with caries: a short review. J Oral Microbiol 2015; 7:26149. [PMID: 25740099 PMCID: PMC4349908 DOI: 10.3402/jom.v7.26149] [Citation(s) in RCA: 54] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/29/2014] [Revised: 12/18/2014] [Accepted: 12/18/2014] [Indexed: 11/14/2022] Open
Abstract
A dental biofilm forms a distinct environment where microorganisms live in a matrix of extracellular polysaccharides. The biofilm favors certain bacteria and creates a habitat that functions differently compared to planktonic bacteria. Reproducible model systems which help to address various questions related to biofilm formation, the process of caries development, and its prevention are needed and are continuously developed. Recent research using both batch culture, continuous culture and flow cells in caries biofilm formation is presented. The development of new techniques and equipment has led to a deeper understanding of how caries biofilms function. Biofilm models have also been used in the development of materials inhibiting secondary caries. This short review summarizes available models to study these questions.
Collapse
Affiliation(s)
- Krista M Salli
- DuPont Nutrition and Health, Kantvik Active Nutrition, Kirkkonummi, Finland;
| | - Arthur C Ouwehand
- DuPont Nutrition and Health, Kantvik Active Nutrition, Kirkkonummi, Finland
| |
Collapse
|