Lignin-carbohydrate complexes: properties, applications, analyses, and methods of extraction: a review

Unraveling interplay between lignocellulosic structures caused by chemical pretreatments in enhancing enzymatic hydrolysis

To investigate the interplay between substrate structure and enzymatic hydrolysis (EH) efficiency, poplar was pretreated with acidic sodium-chlorite (ASC), 3 % sodium-hydroxide (3-SH), and 3 % sulfuric acid (3-SA), resulting in different glucose yields of 94.10 %, 74.35 %, and 24.51 %, respectively, of pretreated residues. Residues were fractionated into cellulose, lignin and unhydrolyzed residue after EH (for lignin-carbohydrate complex (LCC) analysis) and analyzed using HPLC, FTIR, XPS, CP MAS 13C NMR and 2D-NMR (Lignin and LCC analysis). After delignification, holocellulose exhibited a dramatic increase in glucose yield (74.35 % to 90.82 % for 3-SH and 24.51 % to 80.0 % for 3-SA). Structural analysis of holocellulose suggested the synergistic interplay among cellulose allomorphs to limit glucose yield. Residual lignin analysis from un/pretreated residues indicated that higher β-β' contents and S/G ratios were favorable to the inhibitory effect but unfavourable to the holocellulose digestibility and followed the trend in the following order: 3-SA (L3) > 3-SH (L2) > native-lignin (L1). Analysis of enzymatically unhydrolyzed pretreated residues revealed the presence of benzyl ether (BE1,2) LCC and phenyl glycoside (PG) bond linking to xylose (X) and mannose (M), which yielded a xylan-lignin-glucomannan network. The stability, steric hindrance and hydrophobicity of this network may play a central role in defining poplar recalcitrance.

Unveiling the Dissolution Regularities of the Lignin-Carbohydrate Complex in Bamboo Cell Walls during Alkali Pretreatment

Bamboo is a promising biomass resource. However, the complex multilayered structure and chemical composition of bamboo cell walls create a unique anti-depolymerization barrier, which increases the difficulty of separation and utilization of bamboo. In this study, the relationship between the connections of lignin-carbohydrate complexes (LCCs) within bamboo cell walls and their multilayered structural compositions was investigated. The chemical composition, structural properties, dissolution processes, and migration mechanisms of LCCs were analyzed. Alkali-stabilized LCC bonds were found to be predominantly characterized by phenyl glycoside (PhGlc) bonds along with numerous p-coumaric acid (PCA) linkage structures. As demonstrated by the NMR and CLSM results, the dissolution of the LCC during the alkaline pretreatment process was observed to migrate from the inner secondary wall (S-layer) of the bamboo fiber cell walls to the cell corner middle lamella (CCML) and compound middle lamella (CML), ultimately leading to its release from the bamboo. Furthermore, the presence of H-type lignin-FA-arabinoxylan linkage structures within the bamboo LCC was identified with their primary dissolution observed in the S-layer of the bamboo fiber cell walls. The study results provided a clear target for breaking down the anti-depolymerization barrier in bamboo, signifying a major advancement in achieving the comprehensive separation of bamboo components.

Paradise by the far-red light: Far-red and red:blue ratios independently affect yield, pigments, and carbohydrate production in lettuce, Lactuca sativa

In controlled environment agriculture, customized light treatments using light-emitting diodes are crucial to improving crop yield and quality. Red (R; 600-700 nm) and blue light (B; 400-500 nm) are two major parts of photosynthetically active radiation (PAR), often preferred in crop production. Far-red radiation (FR; 700-800 nm), although not part of PAR, can also affect photosynthesis and can have profound effects on a range of morphological and physiological processes. However, interactions between different red and blue light ratios (R:B) and FR on promoting yield and nutritionally relevant compounds in crops remain unknown. Here, lettuce was grown at 200 µmol m-2 s-1 PAR under three different R:B ratios: R:B87.5:12.5 (12.5% blue), R:B75:25 (25% blue), and R:B60:40 (40% blue) without FR. Each treatment was also performed with supplementary FR (50 µmol m-2 s-1; R:B87.5:12.5+FR, R:B75:25+FR, and R:B60:40+FR). White light with and without FR (W and W+FR) were used as control treatments comprising of 72.5% red, 19% green, and 8.5% blue light. Increasing the R:B ratio from R:B87.5:12.5 to R:B60:40, there was a decrease in fresh weight (20%) and carbohydrate concentration (48% reduction in both sugars and starch), whereas pigment concentrations (anthocyanins, chlorophyll, and carotenoids), phenolic compounds, and various minerals all increased. These results contrasted the effects of FR supplementation in the growth spectra; when supplementing FR to different R:B backgrounds, we found a significant increase in plant fresh weight, dry weight, total soluble sugars, and starch. Additionally, FR decreased concentrations of anthocyanins, phenolic compounds, and various minerals. Although blue light and FR effects appear to directly contrast, blue and FR light did not have interactive effects together when considering plant growth, morphology, and nutritional content. Therefore, the individual benefits of increased blue light fraction and supplementary FR radiation can be combined and used cooperatively to produce crops of desired quality: adding FR increases growth and carbohydrate concentration while increasing the blue fraction increases nutritional value.

Characterization of Amycolatopsis 75iv2 dye-decolorizing peroxidase on O-glycosides

Dye-decolorizing peroxidases are heme peroxidases with a broad range of substrate specificity. Their physiological function is still largely unknown, but a role in the depolymerization of plant cell wall polymers has been widely proposed. Here, a new expression system for bacterial dye-decolorizing peroxidases as well as the activity with previously unexplored plant molecules are reported. The dye-decolorizing peroxidase from Amycolatopsis 75iv2 (DyP2) was heterologously produced in the Gram-positive bacterium Streptomyces lividans TK24 in both intracellular and extracellular forms without external heme supplementation. The enzyme was tested on a series of O-glycosides, which are plant secondary metabolites with a phenyl glycosidic linkage. O-glycosides are of great interest, both for studying the compounds themselves and as potential models for studying specific lignin-carbohydrate complexes. The primary DyP reaction products of salicin, arbutin, fraxin, naringin, rutin, and gossypin were oxidatively coupled oligomers. A cleavage of the glycone moiety upon radical polymerization was observed when using arbutin, fraxin, rutin, and gossypin as substrates. The amount of released glucose from arbutin and fraxin reached 23% and 3% of the total substrate, respectively. The proposed mechanism suggests a destabilization of the ether linkage due to the localization of the radical in the para position. In addition, DyP2 was tested on complex lignocellulosic materials such as wheat straw, spruce, willow, and purified water-soluble lignin fractions, but no remarkable changes in the carbohydrate profile were observed, despite obvious oxidative activity. The exact action of DyP2 on such lignin-carbohydrate complexes therefore remains elusive.

IMPORTANCE

Peroxidases require correct incorporation of the heme cofactor for activity. Heterologous overproduction of peroxidases often results in an inactive enzyme due to insufficient heme synthesis by the host organism. Therefore, peroxidases are incubated with excess heme during or after purification to reconstitute activity. S. lividans as a production host can produce fully active peroxidases both intracellularly and extracellularly without the need for heme supplementation. This reduces the number of downstream processing steps and is beneficial for more sustainable production of industrially relevant enzymes. Moreover, this research has extended the scope of dye-decolorizing peroxidase applications by studying naturally relevant plant secondary metabolites and analyzing the formed products. A previously overlooked artifact of radical polymerization leading to the release of the glycosyl moiety was revealed, shedding light on the mechanism of DyP peroxidases. The key aspect is the continuous addition, rather than the more common approach of a single addition, of the cosubstrate, hydrogen peroxide. This continuous addition allows the peroxidase to complete a high number of turnovers without self-oxidation.

Biosafety consideration of nanocellulose in biomedical applications: A review

Nanocellulose-based biomaterials have gained significant attention in various fields, especially in medical and pharmaceutical areas, due to their unique properties, including non-toxicity, high specific surface area, biodegradability, biocompatibility, and abundant feasible and sophisticated strategies for functional modification. The biosafety of nanocellulose itself is a prerequisite to ensure the safe and effective application of biomaterials as they interact with living cells, tissues, and organs at the nanoscale. Potential residual endogenous impurities and exogenous contaminants could lead to the failure of the intended functionalities or even serious health complications if they are not adequately removed and assessed before use. This review summarizes the sources of impurities in nanocellulose that may pose potential hazards to their biosafety, including endogenous impurities that co-exist in the cellulosic raw materials themselves and exogenous contaminants caused by external exposure. Strategies to reduce or completely remove these impurities are outlined and classified as chemical, physical, biological, and combined methods. Additionally, key points that require careful consideration in the interpretation of the biosafety evaluation outcomes were discussed to ensure the safety and effectiveness of the nanocellulose-based biomaterials in medical applications.

A review of pre- and post-surface-modified neem (Azadirachta indica) biomass adsorbent: Surface functionalization mechanism and application

In contemporary wastewater treatment industry, advanced oxidation techniques, membrane filtration, ion exchange, and reverse osmosis are used to treat chemically loaded wastewater. All these methods required highly toxic oxidizing chemicals, high capital investment in membrane/filter materials, and the installation of sophisticated equipment. Wastewater treatment through an adsorption process using biomass-based adsorbent is economical, user-friendly, and sustainable. Neem tree waste has been explored as an adsorbent for wastewater treatment. The chemical components in the neem biomass include carbohydrates, fat, fiber, cellulose, hemicellulose, and lignin, which support the functionalization of neem biomass. Moreover, adsorbent preparation from renewable resources is not only cost-effective and environmentally friendly but also helps in waste management for sustainable growth. Contemporary researchers explored the pre- and post-surface-modified neem biomass adsorbents in scavenging the pollutants from contaminated water. This review extensively explores the activation process of neem biomass, physical and chemical methods of surface modification mechanism, and the factors affecting surface modification. The pollutant removal through pre and post-surface-modified neem biomass adsorbents was also summarized. Furthermore, it also provides a comprehensive summary of the factors that affect the adsorption performance of the neem biomass-derived adsorbents against dyes, metal ions, and other emerging pollutants. Understanding the surface-modification mechanisms and the adsorption efficiency factor of adsorbents will help in harnessing their potential for more efficiently combatting environmental pollution and making strides toward a greener and more sustainable future.

Multi-omics analyses reveal rumen microbes and secondary metabolites that are unique to livestock species

Ruminant livestock, including cattle, sheep, goats, and camels, possess a distinctive digestive system with complex microbiota communities critical for feed conversion and secondary metabolite production, including greenhouse gases. Yet, there is limited knowledge regarding the diversity of rumen microbes and metabolites benefiting livestock physiology, productivity, climate impact, and defense mechanisms across ruminant species. In this study, we utilized metataxonomics and metabolomics data from four evolutionarily distinct livestock species, which had fed on diverse plant materials like grass, shrubs, and acacia trees, to uncover the unique signature microbes and secondary metabolites. We established the presence of a distinctive anaerobic fungus called Oontomyces in camels, while cattle exhibited a higher prevalence of unique microbes like Psychrobacter, Anaeromyces, Cyllamyces, and Orpinomyces. Goats hosted Cleistothelebolus, and Liebetanzomyces was unique to sheep. Furthermore, we identified a set of conserved core microbes, including Prevotella, Rickenellaceae, Cladosporium, and Pecoramyces, present in all the ruminants, irrespective of host genetics and dietary composition. This underscores their indispensable role in maintaining crucial physiological functions. Regarding secondary metabolites, camel's rumen is rich in organic acids, goat's rumen is rich in alcohols and hydrocarbons, sheep's rumen is rich in indoles, and cattle's rumen is rich in sesquiterpenes. Additionally, linalool propionate and terpinolene were uniquely found in sheep rumen, while valencene was exclusive to cattle. This may suggest the existence of species-specific microbes and metabolites that require host rumen-microbes' environment balance. These results have implications for manipulating the rumen environment to target specific microbes and secondary metabolite networks, thereby enhancing livestock productivity, resilience, reducing susceptibility to vectors, and environmentally preferred livestock husbandry.IMPORTANCERumen fermentation, which depends on feed components and rumen microbes, plays a crucial role in feed conversion and the production of various metabolites important for the physiological functions, health, and environmental smartness of ruminant livestock, in addition to providing food for humans. However, given the complexity and variation of the rumen ecosystem and feed of these various livestock species, combined with inter-individual differences between gut microbial communities, how they influence the rumen secondary metabolites remains elusive. Using metagenomics and metabolomics approaches, we show that each livestock species has a signature microbe(s) and secondary metabolites. These findings may contribute toward understanding the rumen ecosystem, microbiome and metabolite networks, which may provide a gateway to manipulating rumen ecosystem pathways toward making livestock production efficient, sustainable, and environmentally friendly.

Nanocellulose: Structure, modification, biodegradation and applications in agriculture as slow/controlled release fertilizer, superabsorbent, and crop protection: A review

This review investigates the potential of nanocellulose in agriculture, encompassing its structure, synthesis, modification, and applications. Our investigation of the characteristics of nanocellulose includes a comprehensive classification of its structure. Various mechanical, chemical and enzymatic synthesis techniques are evaluated, each offering distinct possibilities. The central role of surface functionalization is thoroughly examined. In particular, we are evaluating the conventional production of nanocellulose, thus contributing to the novelty. This review is a pioneering effort to comprehensively explore the use of nanocellulose in slow and controlled release fertilizers, revolutionizing nutrient management and improving crop productivity with reduced environmental impact. Additionally, our work uniquely integrates diverse applications of nanocellulose in agriculture, ranging from slow-release fertilizers, superabsorbent cellulose hydrogels for drought stress mitigation, and long-lasting crop protection via nanocellulose-based seed coatings. The study ends by identifying challenges and unexplored opportunities in the use of nanocellulose in agriculture. This review makes an innovative contribution by being the first comprehensive study to examine the multiple applications of nanocellulose in agriculture, including slow-release and controlled-release fertilizers.

Purification and Fractionation of Lignin via ALPHA: Liquid-Liquid Equilibrium for the Lignin-Acetic Acid-Water System

In order to effectively practice the Aqueous Lignin Purification with Hot Agents (ALPHA) process for lignin purification and fractionation, the temperatures and feed compositions where regions of liquid-liquid equilibrium (LLE) exist must be identified. To this end, pseudo-ternary phase diagrams for the lignin-acetic acid-water system were mapped out at 45-95 °C and various solvent: feed lignin mass ratios (S : F). For a given temperature, the accompanying SL (solid-liquid), SLL (solid-liquid-liquid), and one-phase regions were also located. For the first time, ALPHA using acetic acid (AcOH)-water solution was applied to a lignin recovered via the commercial LignoBoost process. In addition to determining tie-line compositions for the two regions of LLE that were discovered, the distribution of lignin and key impurities (the latter can negatively impact lignin performance for materials applications) between the two liquid phases was also measured. As a representative example, lignin isolated in the lignin-rich phase was reduced 7x in metals and 4x in polysaccharides by using ALPHA with a feed solvent composition of 50-55 % AcOH and an S : F of 6 : 1, with said lignin being obtained at a yield of 50-70 % of the feed lignin and having a molecular weight triple that of the feed.

Isolation and characterization of microcrystalline cellulose from an agro-waste tamarind (Tamarindus indica) seeds and its suitability investigation for biofilm formulation

The exploration of potential bio-fillers for bio-film application is a promising approach to ensure biodegradable, eco-friendly, good-quality materials with high-performance applications. This is a comprehensive study executed to establish the utility of an agro-waste Tamarindus indica seeds for microcrystalline cellulose production and to assess its feasibility for biofilm fabrication. The extraction was carried out through consecutive chemical-mediated alkalization, acid hydrolysis and bleaching. The isolated microcrystalline cellulose from Tamarindus indica seeds (TSMCC) was characterized through chemical, thermal and morphological characterization to validate the cellulose contribution, thermal resistance, and compatibility of the material. The physical parameters as density and yield percentage were assessed to evaluate its light-weight utility and economic productivity. These examinations revealed that TSMCC has good specific properties such as high cellulose content (90.57 %), average density (1.561 g/cm3), feasible average roughness (12.161 nm), desired particle size (60.40 ± 21.10 μm), good crystallinity (CI-77.6 %) and thermal stability (up to 230 °C); which are worthwhile to consider TSMCC for bio-film formulation. Subsequently, bio-films were formulated by reinforcing TSMCC in polylactic acid (PLA) matrix and the mechanical properties of the bio-films were then studied to establish the efficacy of TSMCC. It is revealed that the properties of pure PLA film increased after being incorporated with TSMCC, where 5 %TSMCC addition showed greater impact on crystalline index (26.16 % to 39.62 %), thermal stability (333oc to 389 °C), tensile strength (36.11 ± 2.90 MPa to 40.22 ± 3.22 MPa) and modulus (2.62 ± 0.55GPa to 4.15 ± 0.53GPa). In light of all promising features, 5 % TSMCC is recommended as a potential filler reinforcement for the groundwork of good quality bio-films for active packaging applications in future.

Extraction of super high-yield lignin-carbohydrate complexes from rice straw without compromising cellulose hydrolysis

Lignin-carbohydrate complexes (LCC) that exhibit both structural advantages of lignin and carbohydrates are promising amphiphilic biopolymers, but the extraction is challenged by its liable chemical bond cleavage between lignin and carbohydrates. This work proposed a facile chemical route to integrating the production of water-insoluble (WIS LCC) and water-soluble LCC (WS LCC) into the emerging deep eutectic solvent (DES) biorefinery at mild conditions. The tailored mechanochemical fractionation process of ball milling assisted aqueous alkaline DES could extract 24.2 % LCC in total, with the co-production of a highly hydrolysable cellulose fraction (98.7 % glucose conversion). The resulting LCC exhibited considerably high contents of β-O-4, phenyl glycoside, and ferulic acid linkage bonds. When 100 g starting straw was subjected to this technique route, 9.1 g WIS LCC, 15.1 g WS LCC and 45.5 g glucose were cascaded produced. It was proposed that the selective disruption of hydrogen bonding entangled network and the quasi-state dissolution of the whole biomass allowed the subsequent cascade fractionation of WIS LCC, WS LCC and highly hydrolysable cellulose through solution property adjustment. This work showed a promising approach for LCC production with high yield without compromising cellulose conversion potential, which has been challenging in the current lignocellulose biorefinery.

Structural changes of hemicellulose during pulping process and its interaction with nanocellulose

It is believed that hemicellulose plays a crucial role in binding cellulose and lignin in plant cells. It may provide significant implications through figuring out the interaction between hemicellulose and microfibers and gaining insights how the structure of hemicellulose affects its association with cellulose nanofibers. Herein, the hemicellulose and nanocellulose fractions from pulps obtained by controlling the H-factors of kraft pulping process were quantitatively evaluated for their adsorption behavior using QCM-D. The results showed that harsher cooking (corresponding to high H-factor) significantly affected the chemical composition of hemicellulose, leading to a decrease of its molecular weight and gradually turning it into a linear structure. Hemicellulose possesses a strong natural affinity for CNC-coated sensors. The hemicellulose from the pulp cooked by high H-factor process decreases its ability to adsorb onto nanocellulose, the adsorption rate also slows down, and the conformation of the adsorbed layer changes which makes the binding weak and reversible. In conclusion, the pulping process in high H-factor significantly changed the structure of hemicellulose, leading to a variation in the strength of its interaction with nanocellulose.

Polysaccharide metabolism in Anacardiaceae (Asian lacquer) cross-linked polymers elucidated using in situ trimethylsilylation pyrolysis-gas chromatography-mass spectrometry

Carbohydrates from polysaccharides in natural thermoset Anacardiaceae polymers of Gluta usitata, Toxicodendron succedaneum and Toxicodendron vernicifluum were identified using pyrolysis-gas chromatography-mass spectrometry with in situ trimethylsilylation. Pyrolysates resulting from the pyrolytic intermolecular chain scission of the polysaccharides were used to elucidate monomeric units. Polysaccharides, dispersed in the phenolic lacasse catalysed cross-linked macromolecules, showed to be metabolised through various catabolic and anabolic routes. Galactose functionalities, abundantly present in the polysaccharides were determined to be enzymatically converted to glucose-6-phosphate, followed by conversion via glycolysis and pentose phosphate pathways. Determination of specific routes of carbohydrate modification via glycolysis and pentose phosphate pathways facilitated differentiating G. usitata, T. succedaneum and T. vernicifluum polymers, based on the carbohydrate content. It was also found that uronic type acids, present as end groups of the branched polysaccharide structure, were biochemically converted to aldonic acids. Following the pentose phosphate and glycolysis routes, carbohydrates in G. usitata and T. vernicifluum polymers showed to be further modified via shikimate and cinnamate pathways to produce phenylpropanoid compounds. Parent molecules and pyrolysis products thereof were verified using analytical standards of high purity. The mass spectra and Kovats retention indices were compiled in an AMDIS library, which can be made available on request.

Protective effects of macromolecular polyphenols, metals (zinc, selenium, and copper) - Polyphenol complexes, and different organs with an emphasis on arsenic poisoning: A review

For the potential health benefits and nutritional value, polyphenols are one of the secondary metabolites of plants that have received extensive research. It has anti-inflammatory and cytotoxicity-reducing properties in addition to a high antioxidant content. Macromolecular polyphenols and polysaccharides are biologically active natural polymers with antioxidant and anti-inflammatory potential. Arsenic is an ecologically toxic metalloid. Arsenic in drinking water is the most common way people come into contact with this metalloid. While arsenic is known to cause cancer, it is also used to treat acute promyelocytic leukemia (APL). The treatment's effectiveness is hampered by the adverse effects it can cause on the body. Oxidative stress, inflammation, and the inability to regulate cell death cause the most adverse effects. Polyphenols and other macromolecules like polysaccharides act as neuroprotectants by mitigating free radical damage, inhibiting nitric oxide (NO) production, lowering A42 fibril formation, boosting antioxidant levels, and controlling apoptosis and inflammation. To prevent the harmful effects of toxins, polyphenols and pectin lower oxidative stress, boost antioxidant levels, improve mitochondrial function, control apoptosis, and suppress inflammation. Therefore, it prevents damage to the heart, liver, kidneys, and reproductive system. This review aims to identify the effects of the polyphenols in conjugation with polysaccharides as an ameliorative strategy for arsenic-induced toxicity in various organs.

Lignin Extraction by Using Two-Step Fractionation: A Review

Lignocellulosic biomass represents the most abundant renewable carbon source on earth and is already used for energy and biofuel production. The pivotal step in the conversion process involving lignocellulosic biomass is pretreatment, which aims to disrupt the lignocellulose matrix. For effective pretreatment, a comprehensive understanding of the intricate structure of lignocellulose and its compositional properties during component disintegration and subsequent conversion is essential. The presence of lignin-carbohydrate complexes and covalent interactions between them within the lignocellulosic matrix confers a distinctively labile nature to hemicellulose. Meanwhile, the recalcitrant characteristics of lignin pose challenges in the fractionation process, particularly during delignification. Delignification is a critical step that directly impacts the purity of lignin and facilitates the breakdown of bonds involving lignin and lignin-carbohydrate complexes surrounding cellulose. This article discusses a two-step fractionation approach for efficient lignin extraction, providing viable paths for lignin-based valorization described in the literature. This approach allows for the creation of individual process streams for each component, tailored to extract their corresponding compounds.

Functional Diversification and the Plant Secondary Cell Wall

Much evidence exists suggesting the presence of genetic functional diversification in plants, though literature associated with the role of functional diversification in the evolution of the plant secondary cell wall (SCW) has sparsely been compiled and reviewed in a recent context. This review aims to elucidate, through the examination of gene phylogenies associated with its biosynthesis and maintenance, the role of functional diversification in shaping the critical, dynamic, and characteristic organelle, the secondary cell wall. It will be asserted that gene families resulting from gene duplication and subsequent functional divergence are present and are heavily involved in SCW biosynthesis and maintenance. Furthermore, diversification will be presented as a significant driver behind the evolution of the many functional characteristics of the SCW. The structure and function of the plant cell wall and its constituents will first be explored, followed by a discussion on the phenomenon of gene duplication and the resulting genetic functional divergence that can emerge. Finally, the major constituents of the SCW and their individual relationships with duplication and divergence will be reviewed to the extent of current knowledge on the subject.

Carbohydrate flow through agricultural ecosystems: Implications for synthesis and microbial conversion of carbohydrates

Carbohydrates are chemically and structurally diverse biomolecules, serving numerous and varied roles in agricultural ecosystems. Crops and horticulture products are inherent sources of carbohydrates that are consumed by humans and non-human animals alike; however carbohydrates are also present in other agricultural materials, such as soil and compost, human and animal tissues, milk and dairy products, and honey. The biosynthesis, modification, and flow of carbohydrates within and between agricultural ecosystems is intimately related with microbial communities that colonize and thrive within these environments. Recent advances in -omics techniques have ushered in a new era for microbial ecology by illuminating the functional potential for carbohydrate metabolism encoded within microbial genomes, while agricultural glycomics is providing fresh perspective on carbohydrate-microbe interactions and how they influence the flow of functionalized carbon. Indeed, carbohydrates and carbohydrate-active enzymes are interventions with unrealized potential for improving carbon sequestration, soil fertility and stability, developing alternatives to antimicrobials, and circular production systems. In this manner, glycomics represents a new frontier for carbohydrate-based biotechnological solutions for agricultural systems facing escalating challenges, such as the changing climate.

Impact of Extraction Method on the Structure of Lignin from Ball-Milled Hardwood

Understanding the structure of hardwoods can permit better valorization of lignin by enabling the optimization of green, high-yield extraction protocols that preserve the structure of wood biopolymers. To that end, a mild protocol was applied for the extraction of lignin from ball-milled birch. This made it possible to understand the differences in the extractability of lignin in each extraction step. The fractions were extensively characterized using 1D and 2D nuclear magnetic resonance spectroscopy, size exclusion chromatography, and pyrolysis-gas chromatography-mass spectrometry. This comprehensive characterization highlighted that lignin populations extracted by warm water, alkali, and ionic liquid/ethanol diverged in structural features including subunit composition, interunit linkage content, and the abundance of oxidized moieties. Moreover, ether- and ester-type lignin-carbohydrate complexes were identified in the different extracts. Irrespective of whether natively present in the wood or artificially formed during extraction, these complexes play an important role in the extractability of lignin from ball-milled hardwood. Our results contribute to the further improvement of lignin extraction strategies, for both understanding lignin as present in the lignocellulosic matrix and for dedicated lignin valorization efforts.

Use of Pyrolysis-Gas Chromatography/Mass Spectrometry as a Tool to Study the Natural Variation in Biopolymers in Different Tissues of Economically Important European Softwood Species

Intraspecific macromolecule variation in stemwood, knotwood, and branchwood was studied using analytical pyrolysis with the intention of introducing a rapid working method to assess the variance in lignin content using analytical pyrolysis and highlight variability markers. The study was performed on Picea abies, Abies alba, and Pseudotsuga menziesii. Lignin determined via analytical pyrolysis-GC/MS (Py-lignin) can be used to identify variations in lignin content, compared to using classical Klason lignin values as a reference method for lignin determination, which requires a correction factor. Principal component analysis (PCA) was performed to identify biopolymer pyrolysis product markers for different species, tissues, or heights that could help highlight structural differences. Douglas fir was differentiated from spruce and silver fir in the levoglucosan amount. Guaiacol was more present in spruce wood, and creosol was more present in Douglas fir. Knotwood was structurally close to stemwood in spruce and silver fir, but there was a clear transition between stemwood and branchwood tissue in Douglas fir. Knotwood was differentiated by higher furan compounds. Branchwood was clearly separate from stemwood and knotwood and presented the same markers as compression wood in the form of phenylpropanoid lignins (H-lignin) as well as isoeugenol and vinyl guaiacol, the two most produced lignin pyrolysis products.

Nanocellulose from Cocoa Shell in Pickering Emulsions of Cocoa Butter in Water: Effect of Isolation and Concentration on Its Stability and Rheological Properties

There is a growing interest in developing new strategies to completely or partially replace cocoa butter in food and cosmetic products due to its cost and health effects. One of these alternatives is to develop stable emulsions of cocoa butter in water. However, incorporating cocoa butter is challenging as it solidifies and forms crystals, destabilizing the emulsion through arrested coalescence. Prevention against this destabilization mechanism is significantly lower than against coalescence. In this research, the rheological properties of nanocellulose from cocoa shell, a by-product of the chocolate industry, were controlled through isolation treatments to produce nanocellulose with a higher degree of polymerization (DP) and a stronger three-dimensional network. This nanocellulose was used at concentrations of 0.7 and 1.0 wt %, to develop cocoa butter in-water Pickering emulsion using a high shear mixing technique. The emulsions remained stable for more than 15 days. Nanocellulose was characterized using attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), hot water and organic extractives, atomic force microscopy (AFM), degree of polymerization (DP), and rheological analysis. Subsequently, the emulsions were characterized on days 1 and 15 after their preparation through photographs to assess their physical stability. Fluorescent and electronic microscopy, as well as rheological analysis, were used to understand the physical properties of emulsions.

Wood waste valorization: Ethanol based organosolv as a promising recycling process

Wood waste is a valuable material that could constitute an abundant and inexpensive source for the production of new materials the recovery of energy. In Europe, about 46% of wood waste is recycled to particleboard and fiberboard, while the other fraction is incinerated. However, a considerable quantity of wood waste shows potential for its transformation into value-added products due to its compositional quality. In this work, wood waste collected at a mechanical treatment plant underwent organosolv treatment to produce a cellulose pulp suitable for manufacturing containerboard. Three variables (temperature, acid concentration, and ethanol concentration) were investigated to find an optimal solution to produce wood pulp by means of Design of Experiment. Wood waste was microwave-heated at 160 °C for 15 min using an acidified ethanol-water solution (2% w/w H2SO4 and 0.8 w/w ethanol concentration), producing pulp with an average cellulose content of 76% where 93% of initial cellulose was retained. Thanks to a one-pot approach, ethanol was totally recovered, 62% of initial lignin was precipitated, and 20 g/l of hemicellulose-derived sugars solution was obtained. Finally, three wood waste samples collected in different periods of the year yielded comparable outcomes, suggesting a good reproducibility of the organosolv process. ANOVA test with a significance level of 0.01 showed a p-value of 0.029 and 0.235 for cellulose content and cellulose recovery, respectively. This study paves the way for an industrial symbiosis between recycling centers and paper mills located in the same territory.

Steam explosion as sustainable biomass pretreatment technique for biofuel production: Characteristics and challenges

The biorefining process of lignocellulosic biomass has recently emerged as one of the most profitable biofuel production options. However, pretreatment is required to improve the recalcitrant lignocellulose's enzymatic conversion efficiency. Among biomass pretreatment methods, the steam explosion is an eco-friendly, inexpensive, and effective approach to pretreating biomass, significantly promoting biofuel production efficiency and yield. This review paper critically presents the steam explosion's reaction mechanism and technological characteristics for lignocellulosic biomass pretreatment. Indeed, the principles of steam explosion technology for lignocellulosic biomass pretreatment were scrutinized. Moreover, the impacts of process factors on pretreatment efficiency and sugar recovery for the following biofuel production were also discussed in detail. Finally, the limitations and prospects of steam explosion pretreatment were mentioned. Generally, steam explosion technology applications could bring great potential in pretreating biomass, although deeper studies are needed to deploy this method on industrial scales.

Towards an understanding of the enzymatic degradation of complex plant mannan structures

Plant cell walls are composed of a heterogeneous mixture of polysaccharides that require several different enzymes to degrade. These enzymes are important for a variety of biotechnological processes, from biofuel production to food processing. Several classical mannanolytic enzyme functions of glycoside hydrolases (GH), such as β-mannanase, β-mannosidase and α-galactosidase activities, are helpful for efficient mannan hydrolysis. In this light, we bring three enzymes into the model of mannan degradation that have received little or no attention. By linking their three-dimensional structures and substrate specificities, we have predicted the interactions and cooperativity of these novel enzymes with classical mannanolytic enzymes for efficient mannan hydrolysis. The novel exo-β-1,4-mannobiohydrolases are indispensable for the production of mannobiose from the terminal ends of mannans, this product being the preferred product for short-chain mannooligosaccharides (MOS)-specific β-mannosidases. Second, the side-chain cleaving enzymes, acetyl mannan esterases (AcME), remove acetyl decorations on mannan that would have hindered backbone cleaving enzymes, while the backbone cleaving enzymes liberate MOS, which are preferred substrates of the debranching and sidechain cleaving enzymes. The nonhydrolytic expansins and swollenins disrupt the crystalline regions of the biomass, improving their accessibility for AcME and GH activities. Finally, lytic polysaccharide monooxygenases have also been implicated in promoting the degradation of lignocellulosic biomass or mannan degradation by classical mannanolytic enzymes, possibly by disrupting adsorbed mannan residues. Modelling effective enzymatic mannan degradation has implications for improving the saccharification of biomass for the synthesis of value-added and upcycling of lignocellulosic wastes.

A high throughput screening process and quick isolation of novel lignin-degrading microbes from large number of natural biomasses

High throughput screening approaches can significantly speed up the identification of novel enzymes from natural microbial consortiums. A two-step high throughput screening process was proposed and explored to screen lignin-degrading microorganisms. By employing this modified culture enrichment method and screening based on enzyme activity, a total of 82 bacterial and 46 fungal strains were isolated from fifty decayed wood samples (100 liquid cultures) collected from the banks of the Ottawa River in Canada. Among them, ten bacterial and five fungal strains were selected and identified based on their high laccase activities by 16S rDNA and ITS gene sequencing, respectively. The study identified bacterial strains from various genera including Serratia, Enterobacter, Raoultella, and Bacillus, along with fungal counterparts including Mucor, Trametes, Conifera and Aspergillus. Moreover, Aspergillus sydowii (AORF21), Mucor sp. (AORF43), Trametes versicolor (AORF3) and Enterobacter sp. (AORB55) exhibited xylanase and β- glucanase activities in addition to laccase production. The proposed approach allowed for the quick identification of promising consortia and enhanced the chance of isolating desired strains based on desired enzyme activities. This method is not limited to lignocellulose and lignin-degrading microorganisms but can be applied to identify novel microbial strains and enzymes from different natural samples.

Research Progress and Prospect of Stimuli-Responsive Lignin Functional Materials

As the world's second most abundant renewable natural phenolic polymer after cellulose, lignin is an extremely complex, amorphous, highly cross-linked class of aromatic polyphenolic macromolecules. Due to its special aromatic structure, lignin is considered to be one of the most suitable candidates to replace fossil materials, thus the research on lignin functional materials has received extensive attention. Because lignin has stimuli-sensitive groups such as phenolic hydroxyl, hydroxyl, and carboxyl, the preparation of stimuli-responsive lignin-based functional materials by combining lignin with some stimuli-responsive polymers is a current research hotspot. Therefore, this article will review the research progress of stimuli-responsive lignin-based functional materials in order to guide the subsequent work. Firstly, we elaborate the source and preparation of lignin and various types of lignin pretreatment methods. We then sort out and discuss the preparation of lignin stimulus-responsive functional materials according to different stimuli (pH, light, temperature, ions, etc.). Finally, we further envision the scope and potential value of lignin stimulus-responsive functional materials for applications in actuators, optical coding, optical switches, solar photothermal converters, tissue engineering, and biomedicine.

Antioxidant Activities, Anticancer Activity, Physico-Chemistry Characteristics, and Acute Toxicity of Alginate/Lignin Polymer

Alginate/lignin is a synthetic polymer rich in biological activity and is of great interest. Alginate is extracted from seaweed and lignin is extracted from corn stalks and leaves. In this paper, antioxidant activities of alginate/lignin were evaluated, such as total antioxidant activity, reducing power activity, DPPH free radical scavenging activity, and α-glucosidase inhibition activity. Anticancer activity was evaluated in three cell lines (Hep G2, MCF-7, and NCI H460) and fibroblast. Physico-chemistry characteristics of alginate/lignin were determined through FTIR, DSC, SEM_EDS, SEM_EDS mapping, XRD, XRF, and ¹H-NMR. The acute toxicity of alginate/lignin was studied on Swiss albino mice. The results demonstrated that alginate/lignin possessed antioxidant activity, such as the total antioxidant activity, and reducing power activity, especially the α-glucosidase inhibition activity, and had no free radical scavenging activity. Alginate/lignin was not typical in cancer cell lines. Alginate/lignin existed in a thermally stable and regular spherical shape in the investigated thermal region. Six metals, three non-metals, and nineteen oxides were detected in alginate/lignin. Some specific functional groups of alginate and lignin did not exist in alginate/lignin crystal. Elements, such as C, O, Na, and S were popular in the alginate/lignin structure. LD₀ and LD₁₀₀ of alginate/lignin in mice were 3.91 g/kg and 9.77 g/kg, respectively. Alginate/lignin has potential for applications in pharmaceutical materials, functional foods, and supporting diabetes treatment.

Unveiling lignin structures and lignin-carbohydrate complex (LCC) linkages of bamboo (Phyllostachys pubescens) fibers and parenchyma cells

Bamboo (Phyllostachys pubescens) is an attractive biomass block to develop biorefining industry, however, less emphasis has been placed on elucidating the chemical linkage variations of lignin and LCC between different bamboo cell walls. Here, purified milled wood lignin (MWLp) and lignin-carbohydrate complex (LCC) were isolated from bamboo (Phyllostachys pubescens) fibers (BF) and parenchyma cells (PC), respectively. The variations of structure features and chemical linkages of lignin and LCC were investigated via FT-IR, 2D HSQC NMR, and ³¹P NMR techniques. 2D HSQC NMR revealed that β-O-4 alkyl-aryl ether linkages and resinol (β-β) substructure were the main substructures in BF-MWLp and PC-MWLp. β-1 linkages existed in the PC-MWLp (3.18/100 Ar), but not in BF-MWLp. Moreover, tricin, as a flavonoid compound, was only detected in the BF-MWLp. The amount of the syringyl (S) units of PC-MWLp was higher than BF-MWLp. The results indicated that phenyl glycoside (PhGlc) bonds (mainly lignin and xylan) were the predominant chemical linkage type of LCC bonds in BF-LCC and PC-LCC, and the high contents of PhGlc bonds (45.53/100 Ar) were presented in PC. Our finding can provide a reference for the structural variations of lignin and LCC between the different bamboo cell walls.

Correlation between Lignin-Carbohydrate Complex Content in Grass Lignins and Phenolic Aldehyde Production by Rapid Spray Ozonolysis

We provide strong evidence that the amounts of phenolic aldehydes (vanillin and p-hydroxybenzaldehyde, pHB) selectively released during rapid ozonolysis of grass lignins are correlated with the unsubstituted aryl carbons of lignin-carbohydrate complexes present in these lignins. In the case of acetosolv lignin from corn stover, we observed a steady yield of vanillin and pHB (cumulatively ∼5 wt % of the initial lignin). We demonstrate the continuous ozonolysis of the lignin in a spray reactor at ambient temperature and pressure. In sharp contrast, similar ozonolysis of acetosolv lignin from corn cobs resulted in a twofold increase in the combined yield (∼10 wt %) of vanillin and pHB. Structural analysis with ¹H-¹³C heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance revealed that signals assigned to unsubstituted aryl carbons of lignin-carbohydrate complexes are quantitatively correlated to phenolic aldehyde production from spray ozonolysis. The ratios of the integrated peak volumes corresponding to coumarates and ferulates in the HSQC spectra of cob and corn stover lignins (SLs) are 2.4 and 2.0, respectively. These ratios are nearly identical to the observed 2.3-fold increase in pHB and 1.8-fold increase in vanillin production rates from corn cob lignin compared to corn SL. Considering that the annual U.S. lignin capacity from these grass lignin sources is ∼60 million MT, the value creation potential from these flavoring agents is conservatively ∼$50 million annually from just 10% of the lignin. These new insights into structure/product correlation and spray reactor characteristics provide rational guidance for developing viable technologies to valorize grass lignins.

Functional surfaces, films, and coatings with lignin - a critical review

Lignin is the most abundant polyaromatic biopolymer. Due to its rich and versatile chemistry, many applications have been proposed, which include the formulation of functional coatings and films. In addition to replacing fossil-based polymers, the lignin biopolymer can be part of new material solutions. Functionalities may be added, such as UV-blocking, oxygen scavenging, antimicrobial, and barrier properties, which draw on lignin's intrinsic and unique features. As a result, various applications have been proposed, including polymer coatings, adsorbents, paper-sizing additives, wood veneers, food packaging, biomaterials, fertilizers, corrosion inhibitors, and antifouling membranes. Today, technical lignin is produced in large volumes in the pulp and paper industry, whereas even more diverse products are prospected to be available from future biorefineries. Developing new applications for lignin is hence paramount - both from a technological and economic point of view. This review article is therefore summarizing and discussing the current research-state of functional surfaces, films, and coatings with lignin, where emphasis is put on the formulation and application of such solutions.

Covalently bound humin-lignin hybrids as important novel substructures in organosolv spruce lignins

Organosolv lignins (OSLs) are important byproducts of the cellulose-centred biorefinery that need to be converted in high value-added products for economic viability. Yet, OSLs occasionally display characteristics that are unexpected looking at the lignin motifs present. Applying advanced NMR, GPC, and thermal analyses, isolated spruce lignins were analysed to correlate organosolv process severity to the structural details for delineating potential valorisations. Very mild conditions were found to not fractionate the biomass, causing a mix of sugars, lignin-carbohydrate complexes (LCCs), and corresponding dehydration/degradation products and including pseudo-lignins. Employing only slightly harsher conditions promote fractionation, but also formation of sugar degradation structures that covalently incorporate into the oligomeric and polymeric lignin structures, causing the isolated organosolv lignins to contain lignin-humin hybrid (HLH) structures not yet evidenced as such in organosolv lignins. These structures effortlessly explain observed unexpected solubility issues and unusual thermal responses, and their presence might have to be acknowledged in downstream lignin valorisation.

Xylan glucuronic acid side chains fix suberin-like aliphatic compounds to wood cell walls

Wood is the most important repository of assimilated carbon in the biosphere, in the form of large polymers (cellulose, hemicelluloses including glucuronoxylan, and lignin) that interactively form a composite, together with soluble extractives including phenolic and aliphatic compounds. Molecular interactions among these compounds are not fully understood. We have targeted the expression of a fungal α-glucuronidase to the wood cell wall of aspen (Populus tremula L. × tremuloides Michx.) and Arabidopsis (Arabidopsis thaliana (L.) Heynh), to decrease contents of the 4-O-methyl glucuronopyranose acid (mGlcA) substituent of xylan, to elucidate mGlcA's functions. The enzyme affected the content of aliphatic insoluble cell wall components having composition similar to suberin, which required mGlcA for binding to cell walls. Such suberin-like compounds have been previously identified in decayed wood, but here, we show their presence in healthy wood of both hardwood and softwood species. By contrast, γ-ester bonds between mGlcA and lignin were insensitive to cell wall-localized α-glucuronidase, supporting the intracellular formation of these bonds. These findings challenge the current view of the wood cell wall composition and reveal a novel function of mGlcA substituent of xylan in fastening of suberin-like compounds to cell wall. They also suggest an intracellular initiation of lignin-carbohydrate complex assembly.

The potential of adopting natural fibers reinforcements for fused deposition modeling: Characterization and implications

Natural fibers or their derivatives have gained significant attention as green fillers or reinforcement materials due to their abundant availability, environment-friendly nature and biodegradability for sustainable development. Despite the availability of modern alternatives such as concrete, glass-fiber/resin composites, steel, and plastics, there is still considerable demand for naturally occurring based materials for different applications due to their low cost, durability, strength, heat, sound, and fire-resistance characteristics. 3D printing has provided a novel approach to the development and advancement of natural fiber-based composite materials, as well as an important platform for the advancement of biomass materials toward intelligentization and industrialization. The features of 3D printing, particularly fast prototyping and small start-up, allow the easy fabrication of materials for a wide range of applications. This review highlights the current progress and potential commercial applications of 3D printed composites reinforced with natural fibers or biomass. This study discussed that 3D printing technology can be effectively utilized for different applications, including producing electroactive papers, fuel cell membranes, adhesives, wastewater treatment, biosensors, and its potential applications in the automobile, building, and construction industries. The research in the literature showed that even if the field of 3D printing has advanced significantly, problems still need to be solved, such as material incompatibility and material cost. Further studies could be conducted to improve and adapt the methods to work with various materials. More effort should be put into developing affordable printer technologies and materials that work with these printers to broaden the applications for 3D printed objects.

A comprehensive review of the synthesis strategies, properties, and applications of transparent wood as a renewable and sustainable resource

The uncertainties of the environment and the emission levels of nonrenewable resources have compelled humanity to develop sustainable energy savers and sustainable materials. One of the most abundant and versatile bio-based structural materials is wood. Wood has several promising advantages, including high toughness, low thermal conductivity, low density, high Young's modulus, biodegradability, and non-toxicity. Furthermore, while wood has many ecological and structural advantages, it does not meet optical transparency requirements. Transparent wood is ideal for use in various industries, including electronics, packaging, automotive, and construction, due to its high transparency, haze, and environmental friendliness. As a necessary consequence, current research on developing fine wood is summarized in this review. This review begins with an explanation of the history of fine wood. The concept and various synthesis strategies, such as delignification, refractive index measurement methods, and transparent lumber polymerization, are discussed. Approaches and techniques for the characterization of transparent wood are outlined, including microscopic, Fourier transform infrared (FTIR), and X-ray diffraction (XRD) analysis. Furthermore, the characterization, physical properties, mechanical properties, optical properties, and thermal conductivity of transparent wood are emphasized. Eventually, a brief overview of the various applications of fine wood is presented. The present review summarized the first necessary actions toward future transparent wood applications.

Investigation of chemical linkages between lignin and carbohydrates in cultured poplar cambium tissues via double isotope labeling

Lignin precursor labeled with ¹³C (coniferin-¹³Cα), carbohydrate precursor labeled with D (6,6-D₂-glucose) were put into cambium tissue stripped from a growing poplar. The tissue was further cultured in vitro for 18d. Then, the isotopic abundance was determined. The results showed that the labeled precursors could be normally involved in the formation of new xylem. The labeled new xylem tissue was fractionated by ionic liquid DMSO/TBAH system to obtain two components: glucan-lignin complex (GL) and xylan-lignin complex (XL). The X-ray diffraction (XRD) results indicated that the crystalline form of cellulose in the GL component was transformed from type I to type II after the ionic liquid separation. Then the GL and XL were purified and modified by enzymatic and chemical methods, and their structures were elucidated by nuclear magnetic resonance (NMR) spectroscopy. The results showed that lignin subunits in the cultured tissues were mainly connected by β-5 and β-O-4 linkages, of which the β-O-4 substructure unit predominated. Lignin and carbohydrates were mainly connected by acetal bonds, ether bonds, and ester bonds. Combined with the carbohydrate composition and XRD analysis results, the GL components also confirmed the existence of acetal bonds, ester bonds and ether bonds between lignin and cellulose.

Opportunities and Challenges for Lignin Valorization in Food Packaging, Antimicrobial, and Agricultural Applications

The exploration of renewable resources is essential to help transition toward a more sustainable materials economy. The valorization of lignin can be a key component of this transition. Lignin is an aromatic polymer that constitutes approximately one-third of the total lignocellulosic biomass and is isolated in huge quantities as a waste material of biofuel and paper production. About 98% of the 100 million tons of lignin produced each year is simply burned as low-value fuel, so this renewable polymer is widely available at very low cost. Lignin has valuable properties that make it a promising material for numerous applications, but it is far from being fully exploited. The aim of this Perspective is to highlight opportunities and challenges for the use of lignin-based materials in food packaging, antimicrobial, and agricultural applications. In the first part, the ongoing research and the possible future developments for the use of lignin as an additive to improve mechanical, gas and UV barrier, and antioxidant properties of food packaging items will be treated. Second, the application of lignin as an antimicrobial agent will be discussed to elaborate on the activity of lignin against bacteria, fungi, and viruses. Finally, the use of lignin in agriculture will be presented by focusing on the application of lignin as fertilizer.

FERONIA and wall-associated kinases coordinate defense induced by lignin modification in plant cell walls

Altering the content or composition of the cell wall polymer lignin is a favored approach to valorize lignin toward biomaterial and chemical production in the biorefinery. However, modifying lignin or cellulose in transgenic plants can induce expression of defense responses and negatively affect growth. Through genetic screening for suppressors of defense gene induction in the low lignin ccr1-3 mutant of Arabidopsis thaliana, we found that loss of function of the receptor-like kinase FERONIA, although not restoring growth, affected cell wall remodeling and blocked release of elicitor-active pectic polysaccharides as a result of the ccr1-3 mutation. Loss of function of multiple wall-associated kinases prevented perception of these elicitors. The elicitors are likely heterogeneous, with tri-galacturonic acid the smallest but not necessarily the most active component. Engineering of plant cell walls will require development of ways to bypass endogenous pectin signaling pathways.

Antioxidant and ultraviolet shielding performance of lignin-polysaccharide complex isolated from spent coffee ground

Spent coffee ground (SCG) is a representative type of biomass waste with huge annual output. To better develop high value applications of SCG, in this study, the lignin-polysaccharide complex (LPC) was isolated from SCG by applying effective ball milling and the subsequent solvent extraction of 96 % 1, 4-dioxane aqueous solution. In addition to the comprehensive analyses of the obtained LPC regarding its chemical composition, surface morphology, molecular weight distribution, characteristic functional groups, surface chemical linkages, and thermal stability, its potentials in radical scavenging and UV shielding had been emphatically investigated. As revealed from the results, a proper duration (e.g., 4 h) of UV irradiation could evidently enhance the radical-scavenging capacity of LPC, ascribed to the increasing number of antioxidant groups. Moreover, the LPC-containing composite sunscreens also exhibited strengthened UV resistance after UV irradiation, which may benefit from the UV-induced conjugated structures and the π-π stacking of aromatic rings from both LPC and the active ingredients in commercial sunscreen. Therefore, LPC is highly promising to be exploited for the development of novel antioxidants and UV-shielding products, by virtue of its characteristic chemical structure and potential synergistic effect with other active ingredients from the composite.

Laccase mediated delignification of wasted and non-food agricultural biomass: Recent developments and challenges

Utilization of microbial laccases is considered as the cleaner and target specific biocatalytic mechanism for the recovery of cellulose and hemicelluloses from nonfood and wasted agricultural, lignocellulosic biomass (LCB). The extent of lignin removal by laccase depends on the biochemical composition of biomass and the redox potential (E⁰) of the biocatalyst. Intensive research efforts are going on all over the world for the recognition of appropriate and easily available agricultural lignocellulosic feedstocks to exploit maximally for the production of value-added bioproducts and biofuels. In such circumstances, laccase can play a major role as a leading biocatalyst and potent substitute for chemical based deconstruction of the lignocellulosic materials. The limited commercialization of laccase at an industrial scale has been feasible due to its full working efficiency mostly expressed in the presence of cost intensive redox mediators only. Although, recently there are some reports that came on the mediator free biocatalysis of enzyme but still not considerably explored and neither understood in depth. The present review will address the various research gaps and shortcomings that acted as the big hurdles before the complete exploitation of laccases at an industrial scale. Further, this article also reveals insights on different microbial laccases and their diverse functional environmental conditions that affect the deconstruction process of LCB.

Challenges and perspectives of green-like lignocellulose pretreatments selectable for low-cost biofuels and high-value bioproduction

Lignocellulose represents the most abundant carbon-capturing substance that is convertible for biofuels and bioproduction. Although biomass pretreatments have been broadly applied to reduce lignocellulose recalcitrance for enhanced enzymatic saccharification, they mostly require strong conditions with potential secondary waste release. By classifying all major types of pretreatments that have been recently conducted with different sources of lignocellulose substrates, this study sorted out their distinct roles for wall polymer extraction and destruction, leading to the optimal pretreatments evaluated for cost-effective biomass enzymatic saccharification to maximize biofuel production. Notably, all undigestible lignocellulose residues are also aimed for effective conversion into value-added bioproduction. Meanwhile, desired pretreatments were proposed for the generation of highly-valuable nanomaterials such as cellulose nanocrystals, lignin nanoparticles, functional wood, carbon dots, porous and graphitic nanocarbons. Therefore, this article has proposed a novel strategy that integrates cost-effective and green-like pretreatments with desirable lignocellulose substrates for a full lignocellulose utilization with zero-biomass-waste liberation.

Organosolv pretreatment for biorefineries: Current status, perspectives, and challenges

Biorefineries integrate processes for the sustainable conversion of biomass into chemicals, materials, and bioenergy so that resources are optimized and effluents are minimized. Despite the vast potential of lignocellulosic biorefineries, their success depends heavily on effective, economically viable, and sustainable biomass fractionation. Although efficient, organosolv pretreatment still faces challenges that must be overcome for its widespread utilization, mainly related to solvent type and recycling, robustness regarding biomass type and integration of hemicellulose recovery and use. This review shows the recent advances and state-of-the-art of organosolv pretreatment, discussing the advances, such as the use of biobased solvents, whilst also shedding light on the perspectives of using the streams - cellulose, hemicellulose, and lignin - to produce biofuels and products of high added value. In addition, it presents an overview of the existing industrial implementations of organosolv processes and, lastly, shows the main scientific and industrial challenges and opportunities for this process.

Glucuronoyl esterases - enzymes to decouple lignin and carbohydrates and enable better utilization of renewable plant biomass

Glucuronoyl esterases (GEs) are microbial enzymes able to cleave covalent linkages between lignin and carbohydrates in the plant cell wall. GEs are serine hydrolases found in carbohydrate esterase family 15 (CE15), which belongs to the large α/β hydrolase superfamily. GEs have been shown to reduce plant cell wall recalcitrance by hydrolysing the ester bonds found between glucuronic acid moieties on xylan polysaccharides and lignin. In recent years, the exploration of CE15 has broadened significantly and focused more on bacterial enzymes, which are more diverse in terms of sequence and structure to their fungal counterparts. Similar to fungal GEs, the bacterial enzymes are able to improve overall biomass deconstruction but also appear to have less strict substrate preferences for the uronic acid moiety. The structures of bacterial GEs reveal that they often have large inserts close to the active site, with implications for more extensive substrate interactions than the fungal GEs which have more open active sites. In this review, we highlight the recent work on GEs which has predominantly regarded bacterial enzymes, and discuss similarities and differences between bacterial and fungal enzymes in terms of the biochemical properties, diversity in sequence and modularity, and structural variations that have been discovered thus far in CE15.

Enhancement of Thermal Behaviour of Flax with a Ramie Fibre-Reinforced Polymer Composite

Plant-derived fibres, called lignocellulosic fibres, are a natural alternative to synthetic fibres in polymer composite reinforcement. Utilizing renewable resources, such as fibre-reinforced polymeric composites made from plant and animal sources, has become a crucial design requirement for developing and producing parts for all industrial goods. Natural-fibre-based composites are used for door panels, trays, glove boxes, etc. This study involves developing and thermal analysing a flax fibre reinforced with phenol-formaldehyde resin hybridization with ramie fibre by way of a vacuum infusion process. As per ASTM Standard, eight different sequences were fabricated and thermally characterized. In the present study, three stages of weight loss (%) are shown by the thermogravimetric analysis (TGA). The sample loses less weight during the first stage, more during the second, and more during the third. The sample's overall maximum temperature was recorded at 630 °C. It was discovered that sample D (80.1 °C) had the highest heat deflection temperature, and sample B had the lowest (86.0 °C). Sample C had a low thermal expansion coefficient, while sample G had a high thermal expansion coefficient. Sample E had the highest thermal conductivity, measured at 0.213 W/mK, whereas sample A had the lowest conductivity, at 0.182 W/mK. From the present study, it was found that sample H had better thermal characteristics. The result of the present investigation would generate thermal data regarding hybrid ramie and flax composites, which would be helpful for researchers and practitioners involved in the field of biocomposites.

One-Pot Protolignin Extraction by Targeted Unlocking Lignin-Carbohydrate Esters via Nucleophilic Addition-Elimination Strategy

Protolignin extraction can facilitate structure elucidation and valorization of lignin in biorefinery, but is rather challenging due to the complex chemical bonds present. Here, we developed the in situ generated NH₃-reline (IGNR) system to realize one-pot protolignin extraction from lignocellulose. In the IGNR system, reline consisting of choline chloride and urea acted as both a solvent and a nucleophile generator, and the nucleophilic addition-elimination mechanism was verified by model compound studies. The in situ generated NH₃ could precisely cleave the lignin-carbohydrate esters in lignocellulose with a near-quantitative retention of carbohydrates. The extracted IGNR-Protolignin exhibited native lignin substructure with high molecular weight and high β-O-4' content (41.5 per 100 aromatic units). In addition, the up-scaled kilogram reaction demonstrated the feasibility of the IGNR system for potential industrial application in a green and sustainable pathway. This work represents a breakthrough toward protolignin extraction in practice with the future goal of achieving total biorefinery.

Structural variation of lignin-carbohydrate complexes (LCC) in Chinese quince (Chaenomeles sinensis) fruit as it ripens

Chinese quince (Chaenomeles sinensis) fruits are rich in lignin, and too sour, astringent and woody to be eaten raw. More than 50 % of lignin in plant cell walls is covalently associated with carbohydrates to form lignin-carbohydrate complexes (LCC). In this study, LCC preparations were extracted from fruits harvested on the 15th day of the month from May-October 2019. A variety of chemical and instrumental analytical approaches were used to characterize the LCC fractions, including HPAEC, TGA, GPC, FT-IR, and 2D HSQC NMR. Antioxidant activities were evaluated by DPPH radical scavenging assays. Results showed that the LCC fractions from October fruits had better thermal stability and homogeneity. NMR results revealed that the lignin-lignin linkages in LCC-AcOH preparations included β-O-4', β-β' and β-5', but β-5' linkages were not present in LCC preparations. And the NMR signals of carbohydrate confirmed the presence of lignin-pectin complexes, which was consistent with sugar analysis. All LCC preparations showed good antioxidant activity, among which Björkman LCC from October fruits showed best. This study will facilitate understanding the chemical bonds of LCC macromolecules in the plant cell wall. More specifically, it provides information critical for specific industrial applications of quince fruits.

Structural evolution of lignin after selective oxidation of lignin-carbohydrate complex by chlorine dioxide

Lignin-carbohydrate complexes (LCCs) are important from the perspective of the anti-depolymerization barrier of lignocellulosic biomass, as it limits the high-value utilization of lignocellulosic biomass resources. In this study, the unit structure of lignin in the LCC has been investigated in depth. Oxidation of a selective lignin unit by chlorine dioxide revealed that the LCC structures are enriched with xylanase-macroporous resins, and the structure that was not oxidized in LCC was also identified. At a chlorine dioxide concentration of 90.93 mg/L, 1 g of LCC lignin is oxidized by 0.7 g chlorine dioxide. The purified residual hemicellulose lignin was mainly H-type. The β-O-4' signal was the strongest for the bond between lignin and carbohydrates. Therefore, it is speculated that most of the residual lignin in bamboo-alkali hemicellulose exists in the form of non-phenolic structural units. This study provides a reference for further studies on the specific structures of LCC.

Life cycle assessment of transparent wood production using emerging technologies and strategic scale-up framework

Transparent wood, a sustainable material, holds the potential to replace conventional petroleum-based polymers because of its renewable and biodegradable properties. It has been recently used for construction, energy storage, flexible electronics, and packaging applications. Life cycle analysis (LCA) of transparent wood would provide the environmental impacts during its production and end-of-life (EOL). The cradle-to-gate analysis of transparent wood suggests that sodium hydroxide, sodium sulfite, hydrogen peroxide-based delignification (NaOH + Na₂SO₃ + H₂O₂ method), and epoxy infiltration lead to the lowest environmental impacts. It generates approximately 24 % less global warming potential and about 15 % less terrestrial acidification than sodium chlorite delignification and polymethyl methacrylate (PMMA) infiltration. The modelled industrial-scale production has lower electricity consumption (by 98.8 %) and environmental impacts than the laboratory scale (28 % less global warming potential and approximately 97 % less human toxicity). The EOL analysis of transparent wood showed reduced ecological impacts (10⁷ times) in comparison to polyethylene, suggesting that it can be commercially adapted to replace conventional petroleum-based materials.