The active site of the SGNH hydrolase-like fold proteins: Nucleophile-oxyanion (Nuc-Oxy) and Acid-Base zones

SGNH hydrolase-like fold proteins are serine proteases with the default Asp-His-Ser catalytic triad. Here, we show that these proteins share two unique conserved structural organizations around the active site: (1) the Nuc-Oxy Zone around the catalytic nucleophile and the oxyanion hole, and (2) the Acid-Base Zone around the catalytic acid and base. The Nuc-Oxy Zone consists of 14 amino acids cross-linked with eight conserved intra- and inter-block hydrogen bonds. The Acid-Base Zone is constructed from a single fragment of the polypeptide chain, which incorporates both the catalytic acid and base, and whose N- and C-terminal residues are linked together by a conserved hydrogen bond. The Nuc-Oxy and Acid-Base Zones are connected by an SHLink, a two-bond conserved interaction from amino acids, adjacent to the catalytic nucleophile and base.

Canonical structural-binding modes in the calmodulin-target protein complexes

Intracellular calcium sensor protein calmodulin (CaM) belongs to the large EF-hand protein superfamily. CaM shows a unique and not fully understood ability to bind to multiple targets, allows them to participate in a variety of regulatory processes. The protein has two approximately symmetrical globular domains (the N- and C-lobes). Analysis of the CaM-binding sites of target proteins showed that they have two hydrophobic 'anchor' amino acids separated by 10 to 17 residues. Consequently, several CaM-binding motifs: {1-10}, {1-11}, {1-13}, {1-14}, {1-16}, {1-17}, differing by the distance between the two anchor residues along the amino acid sequence, have been identified. Despite extensive structural information on the role of target-protein amino acid residues in the formation of complexes with CaM, much less is known about the role of amino acids from CaM contributing to these interactions. In this work, a quantitative analysis of the contact surfaces of CaM and target proteins has been carried out for 35 representative three-dimensional structures. It has been shown that, in addition to the two hydrophobic terminal residues of the target fragment, the interaction also involves residues that are 4 residues earlier in the sequence (binding mode {1-5}). It has also been found that the N- and C-lobes of CaM bind the {1-5} motif located at the ends of the target in a structurally identical manner. Methionine residues at positions 51 (corresponding to 124 in the C-lobe), 71 (144), and 72 (145) of the CaM amino acid sequence are key hydrophobic residues for this interaction. They are located at the N- and C-boundaries of the even EF-hand motifs. The hydrophobic core of CaM ('Ф-quatrefoil') consists of 10 amino acids in the N-lobe (and in the C-lobe): Phe16 (Phe89), Phe19 (Phe92), Ile27 (Ile100), Thr29 (Ala102), Leu32 (Leu105), Ile52 (Ile125), Val55 (Ala128), Ile63 (Val136), Phe65 (Tyr138), and Phe68 (Phe141) and do not intersect with the target-binding methionine residues. CaM belongs to the 'dynamic' group of EF-hand proteins, in which calcium and protein ligand binding causes only global conformational changes but does not alter the conservative 'black' and 'grey' clusters described in our earlier works (PLoS One. 2014; 9(10):e109287). The membership of CaM in the 'dynamic' group is determined by the triggering and protective methionine layer: Met51 (Met124), Met71 (Met144) and Met72 (Met145). HIGHLIGHTSInterchain interactions in the unique 35 CaM complex structures were analyzed.Methionine amino acids of the N- and C-lobes of CaM form triggering and protective layers.Interactions of the target terminal residues with these methionine layers are structurally identical.CaM belonging to the 'dynamic' group is determined by the triggering and protective methionine layer.Communicated by Ramaswamy H. Sarma.

Structural leitmotif and functional variations of the structural catalytic core in (chymo)trypsin-like serine/cysteine fold proteinases

Proteinases with the (chymo)trypsin-like serine/cysteine fold comprise a large superfamily performing their function through the Acid - Base - Nucleophile catalytic triad. In our previous work (Denesyuk AI, Johnson MS, Salo-Ahen OMH, Uversky VN, Denessiouk K. Int J Biol Macromol. 2020;153:399-411), we described a universal three-dimensional (3D) structural motif, NBCZone, that contains eleven amino acids: dipeptide 42 T-43 T, pentapeptide 54 T-55 T-56 T-57 T(base)-58 T, tripeptide 195 T(nucleophile)-196 T-197 T and residue 213 T (T - numeration of amino acids in trypsin). The comparison of the NBCZones among the members of the (chymo)trypsin-like protease family suggested the existence of 15 distinct groups. Within each group, the NBCZones incorporate an identical set of conserved interactions and bonds. In the present work, the structural environment of the catalytic acid at the position 102 T and the fourth member of the "catalytic tetrad" at the position 214 T was analyzed in 169 3D structures of proteinases with the (chymo)trypsin-like serine/cysteine fold. We have identified a complete Structural Catalytic Core (SCC) consisting of two classes and four groups. The proteinases belonging to different classes and groups differ from each other by the nature of the interaction between their N- and C-terminal β-barrels. Comparative analysis of the 3CLpro(s) from SARS-CoV-2 and SARS-CoV, used as an example, showed that the amino acids at positions 103 T and 179 T affect the nature of the interaction of the "catalytic acid" core (102 T-Core, N-terminal β-barrel) with the "supplementary" core (S-Core, C-terminal β-barrel), which ultimately results in the modulation of the enzymatic activity. The reported analysis represents an important standalone contribution to the analysis and systematization of the 3D structures of (chymo)trypsin-like serine/cysteine fold proteinases. The use of the developed approach for the comparison of 3D structures will allow, in the event of the appearance of new representatives of a given fold in the PDB, to quickly determine their structural homologues with the identification of possible differences.

Interferon Beta Activity Is Modulated via Binding of Specific S100 Proteins

Interferon-β (IFN-β) is a pleiotropic cytokine used for therapy of multiple sclerosis, which is also effective in suppression of viral and bacterial infections and cancer. Recently, we reported a highly specific interaction between IFN-β and S100P lowering IFN-β cytotoxicity to cancer cells (Int J Biol Macromol. 2020; 143: 633–639). S100P is a member of large family of multifunctional Ca²⁺-binding proteins with cytokine-like activities. To probe selectivity of IFN-β—S100 interaction with respect to S100 proteins, we used surface plasmon resonance spectroscopy, chemical crosslinking, and crystal violet assay. Among the thirteen S100 proteins studied S100A1, S100A4, and S100A6 proteins exhibit strictly Ca²⁺-dependent binding to IFN-β with equilibrium dissociation constants, K_d, of 0.04–1.5 µM for their Ca²⁺-bound homodimeric forms. Calcium depletion abolishes the S100—IFN-β interactions. Monomerization of S100A1/A4/A6 decreases K_d values down to 0.11–1.0 nM. Interferon-α is unable of binding to the S100 proteins studied. S100A1/A4 proteins inhibit IFN-β-induced suppression of MCF-7 cells viability. The revealed direct influence of specific S100 proteins on IFN-β activity uncovers a novel regulatory role of particular S100 proteins, and opens up novel approaches to enhancement of therapeutic efficacy of IFN-β.

Papain-like cysteine proteinase zone (PCP-zone) and PCP structural catalytic core (PCP-SCC) of enzymes with cysteine proteinase fold

There are several families of cysteine proteinases with different folds – for example the (chymo)trypsin fold family and papain-like fold family – but in both families the hydrolase activity of cysteine proteinases requires a cysteine residue as the catalytic nucleophile. In this work, we have analyzed the topology of the active site regions in 146 three-dimensional structures of proteins belonging to the Papain-like Cysteine Proteinase (PCP) superfamily, which includes papain as a typical representative of this protein superfamily. All analyzed enzymes contain a unique structurally closed conformation – a “PCP-Zone” – which can be divided into two groups, Class A and Class B. Eight structurally conserved amino acids of the PCP-Zone form a common Structural Core. The Structural Core, catalytic nucleophile, catalytic base and residue Xaa – which stabilizes the side-chain conformation of the catalytic base – make up a PCP Structural Catalytic Core (PCP-SCC). The PCP-SCC of Class A and Class B are divided into 5 and 2 types, respectively. Seven variants of the mutual arrangement of the amino-acid side chains of the catalytic triad – nucleophile, base and residue Xaa – within the same fold clearly demonstrate how enzymes with the papain-like fold adapt to the need to perform diverse functions in spite of their limited structural diversity. The roles of both the PCP-Zone of SARS-CoV-2-PLpro described in this study and the NBCZone of SARS-CoV-2-3CLpro presented in our earlier article (Denesyuk AI, Johnson MS, Salo-Ahen OMH, Uversky VN, Denessiouk K. Int J Biol Macromol. 2020;153:399-411) that are in contacts with inhibitors are discussed.

System Approach for Building of Calcium-Binding Sites in Proteins

We introduce five new local metal cation (first of all, Ca²⁺) recognition units in proteins: Clamp_n,(n−2), Clamp_n,(n−1), Clamp_n,n, Clamp_n,(n+1) and Clamp_n,(n+2). In these units, the backbone oxygen atom of a residue in position “n” of an amino acid sequence and side-chain oxygen atom of a residue in position “n + i” (i = −2 to +2) directly interact with a metal cation. An analysis of the known “Ca²⁺-bound niches” in proteins has shown that a system approach based on the simultaneous use of the Clamp units and earlier proposed One-Residue (OR)/Three-Residue (TR) units significantly improves the results of constructing metal cation-binding sites in proteins.

NBCZone: Universal three-dimensional construction of eleven amino acids near the catalytic nucleophile and base in the superfamily of (chymo)trypsin-like serine fold proteases

(Chymo)trypsin-like serine fold proteases belong to the serine/cysteine proteases found in eukaryotes, prokaryotes, and viruses. Their catalytic activity is carried out using a triad of amino acids, a nucleophile, a base, and an acid. For this superfamily of proteases, we propose the existence of a universal 3D structure comprising 11 amino acids near the catalytic nucleophile and base - Nucleophile-Base Catalytic Zone (NBCZone). The comparison of NBCZones among 169 eukaryotic, prokaryotic, and viral (chymo)trypsin-like proteases suggested the existence of 15 distinct groups determined by the combination of amino acids located at two "key" structure-functional positions 54_T and 55_T near the catalytic base His57_T. Most eukaryotic and prokaryotic proteases fell into two major groups, [ST]A and TN. Usually, proteases of [ST]A group contain a disulfide bond between cysteines Cys42_T and Cys58_T of the NBCZone. In contrast, viral proteases were distributed among seven groups, and lack this disulfide bond. Furthermore, only the [ST]A group of eukaryotic proteases contains glycine at position 43_T, which is instrumental for activation of these enzymes. In contrast, due to the side chains of residues at position 43_T prokaryotic and viral proteases do not have the ability to carry out the structural transition of the eukaryotic zymogen-zyme type.

Experimental Insight into the Structural and Functional Roles of the 'Black' and 'Gray' Clusters in Recoverin, a Calcium Binding Protein with Four EF-Hand Motifs

Recently, we have found that calcium binding proteins of the EF-hand superfamily (i.e., a large family of proteins containing helix-loop-helix calcium binding motif or EF-hand) contain two types of conserved clusters called cluster I ('black' cluster) and cluster II ('grey' cluster), which provide a supporting scaffold for the Ca2+ binding loops and contribute to the hydrophobic core of the EF-hand domains. Cluster I is more conservative and mostly incorporates aromatic amino acids, whereas cluster II includes a mix of aromatic, hydrophobic, and polar amino acids of different sizes. Recoverin is EF-hand Ca2+-binding protein containing two 'black' clusters comprised of F35, F83, Y86 (N-terminal domain) and F106, E169, F172 (C-terminal domain) as well as two 'gray' clusters comprised of F70, Q46, F49 (N-terminal domain) and W156, K119, V122 (C-terminal domain). To understand a role of these residues in structure and function of human recoverin, we sequentially substituted them for alanine and studied the resulting mutants by a set of biophysical methods. Under metal-free conditions, the 'black' clusters mutants (except for F35A and E169A) were characterized by an increase in the α-helical content, whereas the 'gray' cluster mutants (except for K119A) exhibited the opposite behavior. By contrast, in Ca2+-loaded mutants the α-helical content was always elevated. In the absence of calcium, the substitutions only slightly affected multimerization of recoverin regardless of their localization (except for K119A). Meanwhile, in the presence of calcium mutations in N-terminal domain of the protein significantly suppressed this process, indicating that surface properties of Ca2+-bound recoverin are highly affected by N-terminal cluster residues. The substitutions in C-terminal clusters generally reduced thermal stability of recoverin with F172A ('black' cluster) as well as W156A and K119A ('gray' cluster) being the most efficacious in this respect. In contrast, the mutations in the N-terminal clusters caused less pronounced differently directed changes in thermal stability of the protein. The substitutions of F172, W156, and K119 in C-terminal domain of recoverin together with substitution of Q46 in its N-terminal domain provoked significant but diverse changes in free energy associated with Ca2+ binding to the protein: the mutant K119A demonstrated significantly improved calcium binding, whereas F172A and W156A showed decrease in the calcium affinity and Q46A exhibited no ion coordination in one of the Ca2+-binding sites. The most of the N-terminal clusters mutations suppressed membrane binding of recoverin and its inhibitory activity towards rhodopsin kinase (GRK1). Surprisingly, the mutant W156A aberrantly activated rhodopsin phosphorylation regardless of the presence of calcium. Taken together, these data confirm the scaffolding function of several cluster-forming residues and point to their critical role in supporting physiological activity of recoverin.

Monomeric state of S100P protein: Experimental and molecular dynamics study

S100 proteins constitute a large subfamily of the EF-hand superfamily of calcium binding proteins. They possess one classical EF-hand Ca²⁺-binding domain and an atypical EF-hand domain. Most of the S100 proteins form stable symmetric homodimers. An analysis of literature data on S100 proteins showed that their physiological concentrations could be much lower than dissociation constants of their dimeric forms. It means that just monomeric forms of these proteins are important for their functioning. In the present work, thermal denaturation of apo-S100P protein monitored by intrinsic tyrosine fluorescence has been studied at various protein concentrations within the region from 0.04-10 μM. A transition from the dimeric to monomeric form results in a decrease in protein thermal stability shifting the mid-transition temperature from 85 to 75 °C. Monomeric S100P immobilized on the surface of a sensor chip of a surface plasmon resonance instrument forms calcium dependent 1 to 1 complexes with human interleukin-11 (equilibrium dissociation constant 1.2 nM). In contrast, immobilized interleukin-11 binds two molecules of dimeric S100P with dissociation constants of 32 nM and 288 nM. Since effective dissociation constant of dimeric S100P protein is very low (0.5 μM as evaluated from our data) the sensitivity of the existing physical methods does not allow carrying out a detailed study of S100P monomer properties. For this reason, we have used molecular dynamics methods to evaluate structural changes in S100P upon its transition from the dimeric to monomeric state. 80-ns molecular dynamics simulations of kinetics of formation of S100P, S100B and S100A11 monomers from the corresponding dimers have been carried out. It was found that during the transition from the homo-dimer to monomer form, the three S100 monomer structures undergo the following changes: (1) the helices in the four-helix bundles within each monomer rotate in order to shield the exposed non-polar residues; (2) almost all lost contacts at the dimer interface are substituted with equivalent and newly formed interactions inside each monomer, and new stabilizing interactions are formed; and (3) all monomers recreate functional hydrophobic cores. The results of the present study show that both dimeric and monomeric forms of S100 proteins can be functional.

Analyzing the structural and functional roles of residues from the 'black' and 'gray' clusters of human S100P protein

Two highly conserved structural motifs observed in members of the EF-hand family of calcium binding proteins. The motifs provide a supporting scaffold for the Ca2+ binding loops and contribute to the hydrophobic core of the EF-hand domain. Each structural motif represents a cluster of three amino acids called cluster I ('black' cluster) and cluster II ('grey' cluster). Cluster I is more conserved and mostly incorporates aromatic amino acids. In contrast, cluster II is noticeably less conserved and includes a mix of aromatic, hydrophobic, and polar amino acids of different sizes. In the human calcium binding S100 P protein, these 'black' and 'gray' clusters include residues F15, F71, and F74 and L33, L58, and K30, respectively. To evaluate the effects of these clusters on structure and functionality of human S100 P, we have performed Ala scanning. The resulting mutants were studied by a multiparametric approach that included circular dichroism, scanning calorimetry, dynamic light scattering, chemical crosslinking, and fluorescent probes. Spectrofluorimetric Ca2+-titration of wild type S100 P showed that S100 P dimer has 1-2 strong calcium binding sites (K₁ = 4 × 106 M^-1) and two cooperative low affinity (K₂ = 4 × 104 M^-1) binding sites. Similarly, the S100 P mutants possess two types of calcium binding sites. This analysis revealed that the alanine substitutions in the clusters I and II caused comparable changes in the S100 P functional properties. However, analysis of heat- or GuHCl-induced unfolding of these proteins showed that the alanine substitutions in the cluster I caused notably more pronounced decrease in the protein stability compared to the changes caused by alanine substitutions in the cluster II. Opposite to literature data, the F15 A substitution did not cause the S100 P dimer dissociation, indicating that F15 is not crucial for dimer stability. Overall, similar to parvalbumins, the S100 P cluster I is more important for protein conformational stability than the cluster II.

Distinctive structural motifs co-ordinate the catalytic nucleophile and the residues of the oxyanion hole in the alpha/beta-hydrolase fold enzymes

The alpha/beta-hydrolases (ABH) are among the largest structural families of proteins that are found in nature. Although they vary in their sequence and function, the ABH enzymes use a similar acid-base-nucleophile catalytic mechanism to catalyze reactions on different substrates. Because ABH enzymes are biocatalysts with a wide range of potential applications, protein engineering has taken advantage of their catalytic versatility to develop enzymes with industrial applications. This study is a comprehensive analysis of 40 ABH enzyme families focusing on two identified substructures: the nucleophile zone and the oxyanion zone, which co-ordinate the catalytic nucleophile and the residues of the oxyanion hole, and independently reported as critical for the enzymatic activity. We also frequently observed an aromatic cluster near the nucleophile and oxyanion zones, and opposite the ligand-binding site. The nucleophile zone, the oxyanion zone and the residue cluster enriched in aromatic side chains comprise a three-dimensional structural organization that shapes the active site of ABH enzymes and plays an important role in the enzymatic function by structurally stabilizing the catalytic nucleophile and the residues of the oxyanion hole. The structural data support the notion that the aromatic cluster can participate in co-ordination of the catalytic histidine loop, and properly place the catalytic histidine next to the catalytic nucleophile.

Comprehensive analysis of the roles of 'black' and 'gray' clusters in structure and function of rat β-parvalbumin

Recently we found two highly conserved structural motifs in the proteins of the EF-hand calcium binding protein family. These motifs provide a supporting scaffold for the Ca²⁺ binding loops and contribute to the hydrophobic core of the EF-hand domain. Each structural motif forms a cluster of three amino acids called cluster I ('black' cluster) and cluster II ('grey' cluster). Cluster I is much more conserved and mostly incorporates aromatic amino acids. In contrast, cluster II includes a mix of aromatic, hydrophobic, and polar amino acids. The 'black' and 'gray' clusters in rat β-parvalbumin consist of F48, A100, F103 and G61, L64, M87, respectively. In the present work, we sequentially substituted these amino acids residues by Ala, except Ala100, which was substituted by Val. Physical properties of the mutants were studied by circular dichroism, scanning calorimetry, dynamic light scattering, chemical crosslinking, and fluorescent probe methods. The Ca²⁺ and Mg²⁺ binding affinities of these mutants were evaluated by intrinsic fluorescence and equilibrium dialysis methods. In spite of a rather complicated pattern of contributions of separate amino acid residues of the 'black' and 'gray' clusters into maintenance of rat β-parvalbumin structural and functional status, the alanine substitutions in the cluster I cause noticeably more pronounced changes in various structural parameters of proteins, such as hydrodynamic radius of apo-form, thermal stability of Ca²⁺/Mg²⁺-loaded forms, and total energy of Ca²⁺ binding in comparison with the changes caused by amino acid substitutions in the cluster II. These findings were further supported by the outputs of computational analysis of the effects of these mutations on the intrinsic disorder predisposition of rat β-parvalbumin, which also indicated that local intrinsic disorder propensities and the overall levels of predicted disorder were strongly affected by mutations in the cluster I, whereas mutations in cluster II had less pronounced effects. These results demonstrate that amino acids of the cluster I provide more essential contribution to the maintenance of structuraland functional properties of the protein in comparison with the residues of the cluster II.

Building kit for metal cation binding sites in proteins

Starting with conformations of calcium-binding sites in parvalbumin and integrin (representative structures of EF-hand and calcium blade zones, respectively) we introduce four new different local Ca²⁺-recognition units in proteins: a one-residue unit type I (ORI); a three-residue unit type I (TRI); a one-residue unit type II (ORII) and a three-residue unit type II (TRII). Based on the amount and nature of variable atoms, the type I and II units theoretically can have four and twelve variants, respectively. Analysis of known "Ca²⁺-bound functional niches" in proteins revealed presence of almost all possible variants of Ca²⁺-recognition units in actual structures. Parvalbumin, integrin alpha-IIb and sixteen other proteins with different Ca²⁺-bound functional niches contain various consecutively joined combinations of OR(I/II) and TR(I/II) units. Such a OR(I/II)+TR(I/II) joint unit forms a tripeptide, which uses three main-chain atoms for metal binding: nitrogen_n (Donor), oxygen_n (Acceptor) and nitrogen_n+2 (Donor). Thus, taken together, the described ORI, TRI, ORII and TRII units can serve as elementary blocks to construct more complex calcium recognizing substructures in a variety of calcium binding sites of unrelated proteins.

Novel calcium recognition constructions in proteins: Calcium blade and EF-hand zone

Metal ions can regulate various cell processes being first, second or third messengers, and some of them, especially transition metal ions, take part in catalysis in many enzymes. As an intracellular ion, Ca²⁺ is involved in many cellular functions from fertilization and contraction, cell differentiation and proliferation, to apoptosis and cancer. Here, we have identified and described two novel calcium recognition environments in proteins: the calcium blade zone and the EF-hand zone, common to 12 and 8 different protein families, respectively. Each of the two environments contains three distinct structural elements: (a) the well-known characteristic Dx[DN]xDG motif; (b) an adjacent structurally identical segment, which binds metal ion in the same way between the calcium blade zone and the EF-hand zone; and (c) the following structurally variable segment, which distinguishes the calcium blade zone from the EF-hand zone. Both zones have sequence insertions between the last residue of the zone and calcium-binding residues in positions V or VI. The long insertion often connects the active and the calcium-binding sites in proteins. Using the structurally identical segments as an anchor, we were able to construct the classical calmodulin type EF-hand calcium-binding site out of two different calcium-binding motifs from two unrelated proteins.

Interleukin-11 binds specific EF-hand proteins via their conserved structural motifs

Interleukin-11 (IL-11) is a hematopoietic cytokine engaged in numerous biological processes and validated as a target for treatment of various cancers. IL-11 contains intrinsically disordered regions that might recognize multiple targets. Recently we found that aside from IL-11RA and gp130 receptors, IL-11 interacts with calcium sensor protein S100P. Strict calcium dependence of this interaction suggests a possibility of IL-11 interaction with other calcium sensor proteins. Here we probed specificity of IL-11 to calcium-binding proteins of various types: calcium sensors of the EF-hand family (calmodulin, S100B and neuronal calcium sensors: recoverin, NCS-1, GCAP-1, GCAP-2), calcium buffers of the EF-hand family (S100G, oncomodulin), and a non-EF-hand calcium buffer (α-lactalbumin). A specific subset of the calcium sensor proteins (calmodulin, S100B, NCS-1, GCAP-1/2) exhibits metal-dependent binding of IL-11 with dissociation constants of 1-19 μM. These proteins share several amino acid residues belonging to conservative structural motifs of the EF-hand proteins, 'black' and 'gray' clusters. Replacements of the respective S100P residues by alanine drastically decrease its affinity to IL-11, suggesting their involvement into the association process. Secondary structure and accessibility of the hinge region of the EF-hand proteins studied are predicted to control specificity and selectivity of their binding to IL-11. The IL-11 interaction with the EF-hand proteins is expected to occur under numerous pathological conditions, accompanied by disintegration of plasma membrane and efflux of cellular components into the extracellular milieu.

Extremophilic 50S Ribosomal RNA-Binding Protein L35Ae as a Basis for Engineering of an Alternative Protein Scaffold

Due to their remarkably high structural stability, proteins from extremophiles are particularly useful in numerous biological applications. Their utility as alternative protein scaffolds could be especially valuable in small antibody mimetic engineering. These artificial binding proteins occupy a specific niche between antibodies and low molecular weight substances, paving the way for development of innovative approaches in therapeutics, diagnostics, and reagent use. Here, the 50S ribosomal RNA-binding protein L35Ae from the extremophilic archaea Pyrococcus horikoshii has been probed for its potential to serve as a backbone in alternative scaffold engineering. The recombinant wild type L35Ae has a native-like secondary structure, extreme thermal stability (mid-transition temperature of 90°C) and a moderate resistance to the denaturation by guanidine hydrochloride (half-transition at 2.6 M). Chemical crosslinking and dynamic light scattering data revealed that the wild type L35Ae protein has a propensity for multimerization and aggregation correlating with its non-specific binding to a model cell surface of HEK293 cells, as evidenced by flow cytometry. To suppress these negative features, a 10-amino acid mutant (called L35Ae 10X) was designed, which lacks the interaction with HEK293 cells, is less susceptible to aggregation, and maintains native-like secondary structure and thermal stability. However, L35Ae 10X also shows lowered resistance to guanidine hydrochloride (half-transition at 2.0M) and is more prone to oligomerization. This investigation of an extremophile protein’s scaffolding potential demonstrates that lowered resistance to charged chemical denaturants and increased propensity to multimerization may limit the utility of extremophile proteins as alternative scaffolds.

Intrinsic disorder in S100 proteins

Although the members of the largest subfamily of the EF-hand proteins, S100 proteins, are evolutionarily young, their functional diversity is extremely broad, partly due to their ability to adapt to various targets. This feature is a hallmark of intrinsically disordered proteins (IDPs), but none of the S100 proteins are recognized as IDPs. S100 are predicted to be enriched in intrinsic disorder, with 62% of them being predicted to be disordered by at least one of the predictors: 31% are recognized as 'molten globules' and 15% are shown to be in extended disordered form. The disorder level of predicted disordered S100 regions is conserved compared to that of more structured regions. The central disordered stretch corresponds to the major part of pseudo EF-hand loop, helix II, hinge region, and an initial part of helix III. It contains about half of known sites of enzymatic post-translational modifications (PTMs), confirming that this region can be flexible in vivo. Most of the internal residues missing in tertiary structures belong to the hinge. Both hinge and pseudo EF-hand loop correspond to the local maxima of the PONDR® VSL2 score and are shown to be evolutionary hotspots, leading to gain of new functional properties. The action of PTMs is shown to be destabilizing, in contrast with the effect of metal-binding or S100 dimerization. Formation of the S100 heterodimers relies on the interplay between the structural rigidity of one of the S100 monomers and the flexibility of another monomer. The ordered regions dominate in the S100 homodimerization sites. Target-binding sites generally consist of distant regions, drastically differing in their disorder level. The disordered region comprising most of the hinge and the N-terminal half of helix III is virtually not involved into dimerization, being intended solely for target recognition. The structural flexibility of this region is essential for recognition of diverse target proteins. At least 86% of multiple interactions of S100 proteins with binding partners are attributed to the S100 proteins predicted to be disordered. Overall, the intrinsic disorder is inherent to many S100 proteins and is vital for activity and functional diversity of the family.

Oxidation mimicking substitution of conservative cysteine in recoverin suppresses its membrane association

Recoverin belongs to the family of intracellular Ca(2+)-binding proteins containing EF-hand domains, neuronal calcium sensors (NCS). In photoreceptor outer segments, recoverin is involved into the recovery of visual cycle via Ca(2+)-dependent interaction with disk membranes and inhibition of rhodopsin kinase. The function of a conservative within NCS family Cys residue in the inactive EF-loop 1 remains unclear, but previous study has shown its vulnerability to oxidation under mild oxidizing conditions. To elucidate the influence of oxidation of the conservative Cys39 in recoverin the properties of its C39D mutant, mimicking oxidative conversion of Cys39 into sulfenic, sulfinic or sulfonic acids have been studied using intrinsic fluorescence, circular dichroism, and equilibrium centrifugation methods. The C39D substitution results in essential changes in structural, physico-chemical and physiological properties of the protein: it reduces α-helical content, decreases thermal stability and suppresses protein affinity for photoreceptor membranes. The latter effect precludes proper functioning of the Ca(2+)-myristoyl switch in recoverin. The revealed significance of oxidation state of Cys39 for maintaining the protein functional status shows that it may serve as redox sensor in vision and suggests an explanation of the available data on localization and light-dependent translocation of recoverin in rod photoreceptors.

Metal-controlled interdomain cooperativity in parvalbumins

Conformational behavior of five homologous proteins, parvalbumins (PAs) from northern pike (alpha and beta isoforms), Baltic cod, and rat (alpha and beta isoforms), was studied by scanning calorimetry, circular dichroism, and bis-ANS fluorescence. The mechanism of the temperature-induced denaturation of these proteins depends dramatically on both the peculiarities of their amino acid sequences and on their interaction with metal ions. For example, the pike alpha-PA melting can be described by two successive two-state transitions with mid-temperatures of 90 and 120 degrees C, suggesting the presence of two thermodynamic domains. The intermediate state populated at the end of the first transition was shown to bind Ca(2+) ions, and was characterized by the largely preserved secondary structure and increased solvent exposure of hydrophobic groups. Mg(2+)- and Na(+)-loaded forms of pike alpha-PA demonstrated a single two-state transition. Therefore, the mechanism of the PA thermal denaturation is controlled by metal binding. It ranged from the absence of detectable first-order transition (apo-form of pike PA), to the two-state transition (e.g., Mg(2+)- and Na(+)-loaded forms of pike alpha-PA), to the more complex mechanisms (Ca(2+)-loaded PAs) involving at least one partially folded intermediate. Analysis of isolated cavities in the protein structures revealed that the interface between the CD and EF subdomains of Ca(2+)-loaded pike alpha-PA is much more loosely packed compared with PAs manifesting single heat-sorption peak. The impairment of interactions between CD and EF subdomains may cause a loss of structural cooperativity and appearance of two separate thermodynamic domains. One more peculiar feature of pike alpha-PA is that depending on its interactions with metal ions, it can be an intrinsically disordered protein (apo-form), an ordered protein of mesophilic (Na(+)-bound state), thermophilic (Mg(2+)-form), or even of the hyperthermophilic origin (Ca(2+)-form).

Apo-parvalbumin as an intrinsically disordered protein

Recently defined family of intrinsically disordered proteins (IDP) includes proteins lacking rigid tertiary structure meanwhile fulfilling essential biological functions. Here we show that apo-state of pike parvalbumin (alpha- and beta-isoforms, pI 5.0 and 4.2, respectively) belongs to the family of IDP, which is in accord with theoretical predictions. Parvalbumin (PA) is a 12-kDa calcium-binding protein involved into regulation of relaxation of fast muscles. Differential scanning calorimetry measurements of metal-depleted form of PA revealed the absence of any thermally induced transitions with measurable denaturation enthalpy along with elevated specific heat capacity, implying the lack of rigid tertiary structure and exposure of hydrophobic protein groups to the solvent. Calcium removal from the PAs causes more than 10-fold increase in fluorescence intensity of hydrophobic probe bis-ANS and is accompanied by a decrease in alpha-helical content and a marked increase in mobility of aromatic residues environment, as judged by circular dichroism spectroscopy (CD). Guanidinium chloride-induced unfolding of the apo-parvalbumins monitored by CD showed the lack of fixed tertiary structure. Theoretical estimation of energetics of the charge-charge interactions in the PAs indicated their pronounced destabilization upon calcium removal, which is in line with sequence-based predictions of disordered protein chain regions. Far-UV CD studies of apo-alpha-PA revealed hallmarks of cold denaturation of the protein at temperatures below 20 degrees C. Moreover, a cooperative thermal denaturation transition with mid-temperature at 10-15 degrees C is revealed by near-UV CD for both PAs. The absence of detectable enthalpy change in this temperature region suggests continuous nature of the transition. Overall, the theoretical and experimental data obtained show that PA in apo-state is essentially disordered nevertheless demonstrates complex denaturation behavior. The native rigid tertiary structure of PA is attained upon association of one (alpha-PA) or two (beta-PA) calcium ions per protein molecule, as follows from calorimetric and calcium titration data.

Negative modulation of signal transduction via interleukin splice variation

Interleukin 6 (IL-6) belongs to a large group of secreted proteins called cytokines functioning to mediate and regulate immunity, inflammation, and hematopoiesis with direct effects on cell proliferation, apoptosis, and differentiation. Along with the IL-6 protein, two of its splice variants, IL-6delta2 and IL-6delta4, were reported to be transcribed or expressed in vivo in human, and the mRNAs of IL-6delta3 and IL-6delta5 had been observed in mouse. While the existence of different splice variants of IL-6 has been shown, very little is known on how the structural modifications of IL-6 resulting from the formation of the different splice variants may alter cytokine functions. We have analyzed the potential effects splicing would have on interactions with the cell surface receptor complex. We (1) constructed three-dimensional structures of the IL-6 splice variants, IL-6delta2, IL-6delta3, and IL-6delta4, with the assumption that an interleukin splice variant as a folded protein should retain a functional hydrophobic core; (2) reconstructed the ternary structural complexes consisting of the modeled IL-6 splice variants, the IL-6 receptor molecule (IL-6R) and the dimeric signal-transducing protein, gp130, and (3) analyzed all complexes and made comparisons with the X-ray structure of the wild-type IL-6 complex. We identified three separate sites on IL-6 where interactions are made with IL-6R and with each of the two copies of gp130. The structural consequences of losing an exon lead to a unique pattern of lost interaction with different components of the receptor complex. Thus, in IL-6 and its splice variants, the exons appear to have compartmentalized roles contributing to the combined function of the cytokine. The modeled interactions suggest that splice variants could act as antagonists, and that IL-6delta2, missing the signal peptide, would be a cytoplasmic protein and be released and interact with nearby cell-surface receptors when cells are damaged. We argue that in the case of IL-6, helix E may act as a "silent secondary structure," which only has an active role when it substitutes for a part of the hydrophobic core, for example, replacing helix A in IL-6delta2.

Recoverin as a redox-sensitive protein

Recoverin is a member of the neuronal calcium sensor (NCS) family of EF-hand calcium binding proteins. In a visual cycle of photoreceptor cells, recoverin regulates activity of rhodopsin kinase in a Ca2+-dependent manner. Like all members of the NSC family, recoverin contains a conserved cysteine (Cys38) in nonfunctional EF-hand 1. This residue was shown to be critical for activation of target proteins in some members of the NCS family but not for interaction of recoverin with rhodopsin kinase. Spectrophotometric titration of Ca2+-loaded recoverin gave 7.6 for the pKa value of Cys38 thiol, suggesting partial deprotonation of the thiol in vivo conditions. An ability of recoverin to form a disulfide dimer and thiol-oxidized monomer under mild oxidizing conditions was found using SDS-PAGE in reducing and nonreducing conditions and Ellman's test. Both processes are reversible and modulated by Ca2+. Although formation of the disulfide dimer takes place only for Ca2+-loaded recoverin, accumulation of the oxidized monomer proceeds more effectively for apo-recoverin. The Ca2+ modulated susceptibility of the recoverin thiol to reversible oxidation may be of potential importance for functioning of recoverin in photoreceptor cells.

Novel CalphaNN structural motif for protein recognition of phosphate ions

Phosphate is one of the most frequently exploited chemical moieties in nature, present in a wide range of naturally occurring and critically important small molecules. Several phosphate group recognition motifs have been found for a few narrow groups of proteins, but for many protein families and folds the mode of phosphate recognition remains unclear. Here, we have analyzed the structures of all fold-representative protein-ligand complexes listed in the FSSP database, regardless of whether the bound ligand included a phosphate group. Based on a phosphate-binding motif that we identified in pyridoxal phosphate binding proteins, we have identified a new anion-binding structural motif, CalphaNN, common to 104 fold-representative protein structures that belong to 62 different folds, of which 86% of the fold-representative structures (51 folds) bind phosphate or lone sulfate ions. This motif leads to a precise mode for phosphate group recognition forming a structure where atoms of the phosphate group occupy the most favorable stabilizing positions. The anion-binding CalphaNN motif is based only on main-chain atoms from three adjacent residues, has a conservative betaalphaalpha or betaalphabeta geometry, and recognizes the free phosphate (sulfate) ion as well as one or more phosphate groups in nucleotides and in a variety of cofactors. Moreover, the CalphaNN motif is positioned in functionally important regions of protein structures and often residues of the motif directly participate in the function of the protein.

Phosphate group binding "cup" of PLP-dependent and non-PLP-dependent enzymes: leitmotif and variations

Pyridoxal-5'-phosphate (PLP) is widely used by many enzymes in reactions where amino acids are interconverted. Whereas the role of the pyridoxal ring in catalysis is well understood, the functional role of the single phosphate group in PLP has been less studied. Here we construct unambiguous connection diagrams that describe the interactions among the three non-ester phosphate oxygen atoms of PLP and surrounding atoms from the protein binding site and from water molecules, the so-called phosphate group binding "cup". These diagrams provide a simple means to identify common recognition motifs for the phosphate group in both similar and different protein folds. Diagrams were constructed and compared in the cases of five newly determined structures of PLP-dependent transferases (fold type I enzymes) and, additionally, two non-PLP protein complexes (indole-3-glycerol phosphate synthase (IGPS) with bound indole-3-glycerol phosphate (IGP) and old yellow enzyme (OYE) with bound flavin mononucleotide (FMN)). A detailed comparison of the diagrams shows that three positions out of ten in the structure of the phosphate group binding "cup" contain invariant atoms, while seven others are occupied by conserved atom types. This level of similarity was also observed in the fold type III (TIM beta/alpha-barrel) enzymes that bind three different ligands: PLP, IGP and FMN.

Functional attributes of the phosphate group binding cup of pyridoxal phosphate-dependent enzymes

Twenty-four structures of pyridoxal-5'-phosphate (PLP)-dependent enzymes that represent five different folds are shown to share a common recognition pattern for the phosphate group of their PLP-ligands. All atoms that interact with the phosphate group of PLP in these proteins are organized within a two-layer structure so that the first interacting layer contains from five to seven atoms and parallel with this is a second layer containing from three to seven interacting atoms. In order to identify features of the phosphate-binding site common to PLP-dependent enzymes, a simple procedure is described that assigns relative positions to all interacting atoms unambiguously, such that the networks of interactions for different proteins can be compared. On the basis of these diagrams for 24 enzyme-cofactor complexes, a detailed comparison of the two-layer structures of PLP-dependent enzymes, with both similar and different folds, was made. A majority of the structurally defined PLP-dependent proteins use the same atom types in analogous "key" positions to bind their PLP-ligands. In some instances, proteins use water molecules when a key position is unoccupied. A similar two-layer recognition pattern extends to protein recognition of at least one other, non-PLP ligand, glucosamine 6-phosphate. We refer to this three-dimensional recognition pattern as the phosphate-binding cup. In general, the phosphate-binding cup provides a very stable anchoring point for PLP. When numerous water molecules occur within the cup, however, then the phosphate group of PLP participates directly in the enzymatic reactions with inorganic phosphate replacing the water molecules of the cup. With glucosamine-6-phosphate synthase, the water molecules of the phosphate-binding cup facilitate the entry of substrate and the exit of product.

Common structural elements in the architecture of the cofactor-binding domains in unrelated families of pyridoxal phosphate-dependent enzymes

A detailed comparison of the structures of aspartate aminotransferase, alanine race-mase, the beta subunit of tryptophan synthase, D-amino acid aminotransferase and glycogen phosphorylase has revealed more extensive structural similarities among pyridoxal phosphate (PLP)-binding domains in these enzymes than was observed previously. These similarities consist of seven common structural segments of the polypeptide chain, which form an extensive common structural organization of the backbone chain responsible for the appropriate disposition of key residues, some from the aligned fragments and some from variable loops joined to these fragments, interacting with PLPs in these enzymes. This common structural organization contains an analogous hydrophobic minicore formed from four amino acid side chains present in the two most conserved structural elements. In addition, equivalent alpha-beta-alpha-beta supersecondary structures are formed by these seven fragments in three of the five structures: alanine racemase, tryptophan synthase and glycogen phosphorylase. Despite these similarities, it is generally accepted that these proteins do not share a common heritage, but have arisen on five separate occasions. The common and contiguous alpha-beta-alpha-beta structure accounts for only 28 residues and all five enzymes differ greatly in both the orientation of the PLP pyridoxal rings and their contacts with residues close to the common structural elements.

Analogous conformations of both binding and effector regions in cyclosporin A, FK506 and rapamycin

Three immunosuppressant drugs, cyclosporin A, FK506 and rapamycin were compared in their three-dimensional structures by computer modelling. The pairwise comparisons of cyclosporin A, FK506 and rapamycin show two structurally common fragments. One fragment is Mle9-Bmt1 region in cyclosporin A, C22-O5 region in FK506 and C29-O5 region in rapamycin. Another fragment is Mle4-Mle6 region in cyclosporin A and C14-C21 regions in FK506 and rapamycin. The correspondence of the structurally analogous regions with the regions which are involved in the interactions with peptidyl-prolyl cis/trans isomerases and calcineurin or FKBP-rapamycin-associated protein is discussed.

Molecular models of two competitive inhibitors, IL-2delta2 and IL-2delta3, generated by alternative splicing of human interleukin-2

Molecular models of IL-2delta2 and IL-2delta3, two alternative splice variants of human IL-2 without exon 2 and 3, respectively, are described. These alternative splice variants attract particular interest as potential competitive inhibitors of the cytokine. Tertiary structure of IL-2 consists of four-helix bundle including helices A, B, C and D and a beta-pleated sheet. Exon 2 encodes the A-B loop (Asn30-Lys49 residues) linking helices A and B running in one direction. Rotation of the helix A around putative centre during the construction of IL-2delta2 model have not produced any significant changes in the hydrophobic core of IL-2 molecule. However, a large hole was formed on the surface of IL-2delta2 molecule instead of A-B loop in IL-2 fold. A high affinity IL-2 receptor is formed by combination of alpha, beta, and gamma(c) chains. Comparison of the model of the receptor bound IL-2 with the model of IL-2delta2 has shown that their beta-chain binding sites have minimum differences as distinct from alpha and gamma(c) chain-binding sites. Exon 3 encodes Ala50-Lys97 fragment which forms helices B and C with their short connecting loop. Model IL-2delta3 consists of helices A and D and long linking loop. This loop was composed of A-B and C-D loops which run in opposite directions in IL-2 structure and contain beta-strands making a beta-pleated sheet. Conformation of the linking loop relatively to helices A and D was stabilized by creation of a disulphide bond between cysteines 105 and 125. In addition, the hydrophobic residues of beta-sheet interact with the hydrophobic surface of A-D helical complex and close the latter from contacts with solution. Comparison of the model of IL-2 bound to receptor with IL-2delta3 model has shown that absence of helices B and C in IL-2delta3 model results in insignificant conformational changes only in residues interacting with gamma(c) chain of the receptor. The beta/gamma(c) heterodimer is an intermediate affinity receptor of IL-2. Most likely, both IL-2delta2 and IL-2delta3 are naturally occurring IL-2 antagonists since they keep the ability of binding with an intermediate affinity receptor of this cytokine and fail to engage the alpha chain of its high affinity receptor.

Molecular model of an alternative splice variant of human IL-4, IL-4 delta 2, a naturally occurring inhibitor of IL-4-stimulated T cell proliferation

The molecular model of IL-4 delta 2, a naturally occurring splice variant of human IL-4 with exons 1, 3, and 4 in an open reading frame, is described. The second exon codes the main part of the long loop AB connected the helices A and B in parallel superposition. Therefore the hydrophobic core and the native fold of the rest part of IL-4 delta 2 molecule could be preserved without any significant changes only in the case of revolution of the helix A relative to other helices. In the result, the dominated a left-handed four-helix bundle structure of IL-4 with an up-up-down-down structural pattern is transformed to the IL-4 delta 2 structure with a down-up-down-down structural pattern.

Influence of the conserved disulphide bond, exposed to the putative binding pocket, on the structure and function of the immunoglobulin-like molecular chaperone Caf1M of Yersinia pestis

The Yersinia pestis protein Caf1M is a typical representative of a subfamily of periplasmic molecular chaperones with characteristic structural and functional features, one of which is the location of two conserved cysteine residues close to the putative binding pocket. We show that these residues form a disulphide bond, the reduction and alkylation of which significantly increases the dissociation constant of the Caf1M-Caf1 (where Caf 1 is a polypeptide subunit of the capsule) complex [from a Kd of (4.77+/-0.50)x10(-9) M for the intact protein to one of (3.68+/-0.68)x10(-8) M for the modified protein]. The importance of the disulphide bond for the formation of functional Caf1M in vivo was demonstrated using an Escherichia coli dsbA mutant carrying the Y. pestis f1 operon. In accordance with the CD and fluorescence measurements, the disulphide bond is not important for maintenance of the overall structure of the Caf1M molecule, but would appear to affect the fine structural properties of the subunit binding site. A three-dimensional model of the Caf1M-Caf1 complex was designed based on the published crystal structure of PapD (a chaperone required for Pap pili assembly) complexed with a peptide corresponding to the C-terminus of the papG subunit. In the model the disulphide bond is in close proximity to the invariant Caf1M Arg-23 and Lys-142 residues that are assumed to anchor the C-terminal group of the subunit. The importance of this characteristic disulphide bond for the orchestration of the binding site and subunit binding, as well as for the folding of the protein in vivo, is likely to be a common feature of this subfamily of Caf1M-like chaperones. A possible model for the role of the disulphide bond in Caf1 assembly is discussed.

Structure of cytokine hydrophobic cores

Diagrams were constructed that describe, using a common frame of reference, the interactions that occur within the hydrophobic cores of the left-handed four-helix bundles of interleukin-2, -4, -5, granulocyte/macrophage-, granulocyte-, macrophage-colony-stimulating factor, beta- and gamma-interferon, growth hormone, and leukemia inhibitory factor. Based on the assumption that the topologies of the ligand-receptor complexes are similar, analogous patterns were obtained from these diagrams and lead to the detailed comparison of the hydrophobic cores. These patterns were then used to obtain pairwise rigid-body superpositions among all of the four-helix bundles; values of the root-mean-square deviations (C alpha-atoms) over the four alpha-helices of the bundles range from 1.14 A to 3.22 A. Two distinct groups are formed after clustering based on structural superposition of the ten cytokines.

Conservative hydrophobic interdomain contacts of IFN-gamma remain in P17 matrix protein of HIV-1

A constructed scheme of the surface layers containing helices C, D, and E' of various polypeptide chains which participate in the interdomain contacts in IFN-gamma demonstrated two sites of localization of the conservative hydrophobic amino acids. An analogous scheme of the interaction of helices B, C, and D in the p17 matrix protein of HIV-1 showed that the majority of the hydrophobic positions are similar. These data confirm the structural similarity between p17 and IFN-gamma.

Dimer structure as a minimum cooperative subunit of small heat-shock proteins

Recently, it has been shown that small heat-shock proteins (Hsp25, Hsp27) are molecular chaperones. They bind to thermally unfolded proteins and can also assist refolding of denatured proteins. Mammalian small Hsps can form oligomeric structures of about 32 subunits. Until now, no data about cooperativity and stability of the interactions between the subunits of sHsps are available. To analyze these interactions we studied mouse Hsp25 and human Hsp27 by difference adiabatic scanning microcalorimetry (DASM) and circular dichroism (CD). Here we show that, according to DASM data, the minimum cooperatively melting structure is a sHsp-dimer. CD data indicate that Hsp25 major secondary structure, the beta-pleated conformation, is resistant to acidic influence up to pH 4.5 and, at neutral pH values, to heat treatment up to 60 degrees C. The melting pattern of Hsp25/27 bears resemblance to alpha-crystallins. CD data indicate similar secondary, tertiary and quaternary structures of the proteins compared. This finding is in agreement with the revealed homology of primary structure of these proteins and their common chaperone function.

Structural and functional homology between periplasmic bacterial molecular chaperones and small heat shock proteins

The periplasmic Yersinia pestis molecular chaperone Caf1M belongs to a superfamily of bacterial proteins for one of which (PapD protein of Escherichia coli) the immunoglobulin-like fold was solved by X-ray analysis. The N-terminal domain of Caf1M was found to share a 20% amino acid sequence identity with an inclusion body-associated protein IbpB of Escherichia coli. One of the regions that was compared, was 32 amino acids long, and displayed more than 40% identity, probability of random coincidence was 1.2 x 10(-4). IbpB is involved in a superfamily of small heat shock proteins which fulfil the function of molecular chaperone. On the basis of the revealed homology, an immunoglobulin-like one-domain model of IbpB three-dimensional structure was designed which could be a prototype conformation of sHsp's. The structure suggested is in good agreement with the known experimental data obtained for different members of sHsp's superfamily.

Some new aspects of molecular mechanisms of cyclosporin A effect on immune response

A few protein targets were found to display a specific high-affinity interaction with the immunosuppressant cyclosporin A (CsA): cytosolic cyclophilins (CyP)A, B, C, D, E containing from 122 to 174 amino acid residues in a polypeptide chain, and secreted forms of CyP; CyP-40, 40-kDa CsA-binding polypeptide complexed with steroid receptor (SR); CyP-related 150-kDa receptor of natural killer (NK) cells; interleukin 8 (IL-8); actin; a family of molecular chaperones hsp70 and P-glycoprotein (P-GP). All CyPs possess peptidyl-prolyl cis-trans isomerase activity (PPIase) and may serve as ATP-independent molecular chaperone proteins. The CsA-CyP complexes are specific inhibitors of Ca(2+)-and calmodulin-dependent protein phosphatase calcineurin (CaN). The inhibition of CaN blocks the activation of genes of IL-2, IL-2R, IL-4, etc. in T cells. In addition, immunosuppressive and/or antiinflammatory activity of CsA can be executed via CyP-40 and hsp 70 complexed with SR, and following the interaction with CyP-related receptor of NK and with IL-8. CsA binding to CyPC, P-GP and actin may throw light on the biochemical events leading to nephrotoxicity and graft vessel disease, two major side effects produced by CsA. The discovery of the interaction of human immunodeficiency virus type 1 (HIV-1) Gag protein with CyP and effective disruption of this interaction by CsA may be important for our understanding of the pathology caused by this immunosuppressive virus and will inspire therapeutic strategies to nip HIV in the bud. Bacterial immunophilins (ImPs) contribute to the virulence of pathogenic microorganisms. Elucidation of molecular mechanisms of microbial ImPs' action in the pathogenesis of bacterial infections may lead to new strategies for designing antibacterial drugs.

Modelling of steric structure of a periplasmic molecular chaperone Caf1M of Yersinia pestis, a prototype member of a subfamily with characteristic structural and functional features

Steric structure of Caf1M, a periplasmic molecular chaperone of Yersinia pestis, was reconstructed by computer modelling based on a statistically significant primary structure homology between Caf1M and PapD protein from Escherichia coli, and using the known atomic coordinates obtained by the X-ray crystallography for PapD. In the three-dimensional model of Caf1M an accessory sequence between F1 and G1 beta-strands (as compared to PapD) can form a strain-specific part of the binding pocket of surface organell subunits. This accessory sequence decreases the depth of the binding pocket. The characteristic structural feature of the subfamily of periplasmic molecular chaperones with the accessory sequence (Caf1M subfamily) is the existence of exposed to a solvent Cys residues in F1 and G1 beta-strands which can form disulfide bond in the putative binding pocket. The characteristic functional feature of Caf1M subfamily is the chaperoning of more simple compositions of virulence-associated surface organells (in the case of Y. pestis a capsule consists of only F1 protein). Highly conserved R82 and D93, located at the domain surface remote from the putative subunit binding pocket, can participate in direct contacts with the conserved portion of molecular usher proteins.

Cyclophilin A and an antibody against cyclosporin A resemble each other in their binding sites

The three-dimensional structures of cyclosporin A complexed with cyclophilin A or Fab fragment of a monoclonal antibody were compared. In these two complexes conformations of the fragment D-alanine8-N-methylvaline11 in cyclosporin A were in a good agreement. In addition, cyclophilin A and the Fab fragment had related arrangements of the aromatic amino acids in their binding sites, implying that antibody independently utilizes similar structural themes for binding cyclosporin A as cyclophilin A.

Modelling of interhelical contacts in interferons-beta, -gamma, and dimeric interleukin-5

On the basis of crystallographic data, the alpha-helices of interferon-beta as well as each domain of interferon-gamma are located in two layers. This results in a different contribution from the amino acids placing in the middle and border alpha-helices of the layer to the hydrophobic core of the molecule. A close analysis of the structure of dimeric interleukin-5 shows related arrangements of alpha-helices. The full schemes of the interhelix contacts of interferons-beta, -gamma, and dimeric interleukin-5 were constructed. Schemes for interleukin-5 show that extension of helices correlates with the dimer topology.

Common structural patterns of cytokine outer surfaces

Schemes of the four-helix bundle surfaces of interleukin-2, -4, -5, granulocyte/macrophage-, granulocyte-, macrophage-colony-stimulating factor, interferon-beta, -gamma and growth hormone were designed. All cytokines appeared to have the structurally similar "holes" on the surfaces. They were suggested to serve as a part of the main receptor-binding sites.

Structural repeats in cyclosporin A

The conformation of various dipeptides of free and cyclophilin A-bound cyclosporin A were compared. Cyclosporin A was shown to contain in both states conformationally duplicated fragments in the putative binding sites for cyclophilin A and phosphatase calcineurin.

Comparison of conformations of cyclosporin A and macrolide FK506 fragments: localization of putative binding sites with phosphatase calcineurin

The three-dimensional structures of two immunosuppressants, cyclosporin A and macrolide FK506, were compared. The sites N-methylglycine3-N-methylleucine4 and valine5-N-methylleucine6 of cyclosporin A were found to be similar to each other (the root-mean-square value was 0.29 A for six reference points of the main chain) and also to the site C17-C22 of FK506 (the root-mean-square values were 0.33 A and 0.13 A, respectively). We suggest these fragments of cyclosporin A and FK506 make a major contribution to the interaction of the immunosuppressants with the phosphatase calcineurin.

Structural similarity of the binding sites of cyclophilin A-cyclosporin A and FKBP-FK506 systems

Two enzymes, cyclophilin A and FK506-binding protein, with similar cis-trans isomerization catalytic activities but no similarity on the amino acid sequence level were compared in their three-dimensional structure by computer modelling. Cyclophilin A and FK506-binding protein proved to have similar arrangements at nine of the amino acids at their active site pockets. Two inhibitory peptides, cyclosporin A and FK506, also have structural similarities at their contact regions to the active sites. The studied systems may be another example of convergent evolution of enzyme catalytic site.

Protein V, a novel type-II IgG receptor from Streptococcus sp.: sequence, homologies and putative Fc-binding site

We have cloned and sequenced the Fc-receptor-encoding gene, fcrV, from a group G streptococcus. Considerable similarity was revealed between the FcRV, FcRA76 and M proteins of group A streptococci in their signal sequences and 3' termini, and between the Fc-binding regions of FcRV and FcRA76. The promoter and terminator regions showed no homology with those of the fcrA76 and M protein-encoding genes. The A1-A4 domains of FcrV (protein V) exhibit a heptapeptide repeat motif which is characteristic of alpha-helical coiled-coil proteins. The sequence, Ser-Asn-Arg-Ala-Ala, in the outer position, 'f' of each domain is highly conserved and may be involved in FcR-IgG interactions.

Nonapeptide corresponding to the sequence 27-35 of the mature human IL-2 efficiently competes with rIL-2 for binding to thymocyte receptors [corrected]

Previously it was shown [1] that amino acid substitutions at the region of the first alpha-helix of IL-2 specifically inactivate its reactivity with the intermediate-affinity receptor p70, and mutations in the fifth alpha-helix specifically inactivate the binding to the low-affinity receptor p55. We have synthesized the peptides corresponding to the putative binding site of IL-2 with the intermediate-affinity receptor p70 and found that the nonapeptide corresponding to the sequence 27-35 of the mature IL-2 [2] effectively competes with human rIL-2 for binding to thymocyte receptors. Two types of nonapeptide receptors were revealed: those with Kd1 = 1.84 x 10(-8) M and Kd2 = 1.6 x 10(-7) M. The rIL-2 provides a 100% inhibitory effect on the binding of the 125I-labeled nonapeptide to thymocyte receptors, Ki = 3.5 x 10(-8) M. Low immunoproliferative activity of the peptide allows one to recommend it as a specific antiproliferation drug, IL-2 inhibitor [corrected].

Nucleotide sequence of the Yersinia pestis gene encoding F1 antigen and the primary structure of the protein. Putative T and B cell epitopes

The plasmid-located gene caf1 encoding the capsular antigen fraction 1 (F1) of Yersinia pestis was cloned and sequenced. The gene codes for a 170 amino acid peptide with a deduced Mr of 17.6 kDa. The signal peptide sequence was highly homologous to the E. coli consensus signal sequence. The F1 was assumed to have beta-sheet structure for the most part. The region located between amino acids 100 and 150 was suggested to contain putative antigenic determinants and to stimulate T cells.

Theoretical conformational analysis of a family of alpha-helical immunocytokines

According to the results of the theoretical conformation analysis and available experimental data, the known immunocytokines can be divided into two groups: alpha-helical (IFNs-alpha, beta, gamma, omega; IL-2, 3, 4, 5, 6, 7; G-, M-, GM-CSFs; cMGF, PDGF) and beta-pleated proteins (ILs-1 alpha, beta; TNFS-alpha, beta). IFNs-alpha, beta, gamma, omega, IL-6, G-CSF, cMGF were shown to form a family of alpha-helical globular proteins characterized by a statistically significant homology in amino acid sequences and by common features of the secondary structure formation. Comparison of the sequences of 72 IFNs-alpha, beta, omega reveals three clusters of conservative amino acid positions. Their participation in the formation of active sites of IFN-alpha, beta, omega is supposed.

Theoretical analysis of conformation and active sites of interferons

Seven methods for prediction of protein secondary structures [1, 2, 14, 21, 22, 30, 31] were used for analysis of conformation of alpha- and beta-interferons (IFN-alpha and -beta). The results of the analysis indicate that the dominant secondary structure of IFNs-alpha and -beta is an alpha-helix. Five segments of the helix predicted by all the methods used have been identified. Using the method of Vonderviszt and Simon in IFNs-alpha and -beta two domains are predicted, the border between them lying at the region of amino acid (aa) residues 100-110. Comparison of primary structures of IFNs-alpha, -beta and -omega of different origin revealed two peculiar regions of conservative positions. In the first region, restricted to the N-terminal domain, 9 of 13 conservative positions are occupied by hydrophilic residues. In the second region, restricted to the C-terminal domain, all 8 conservative positions are occupied by hydrophobic residues. The C-terminal domain of the IFNs-alpha (aa residues 116-165) has been found to have a statistically valid homology (36%, probability of random coincidence is 5 x 10(-4) with prothymosin-alpha 1 (residues 1-47). The results of the theoretical analysis as compared to the experimental data available suggest the existence of at least two active sites in IFNs-alpha, beta and omega.(ABSTRACT TRUNCATED AT 250 WORDS)