Development and validation of a questionnaire to assess owner and canine quality-of-life and treatment satisfaction in canine allergic dermatitis

BACKGROUND

Animal and owner quality-of-life (QoL) is pivotal in treatment decisions. Accurate measurement of owner-reported QoL and treatment satisfaction (TS) supports disease burden and treatment benefit evaluation.

OBJECTIVES

Develop and evaluate an owner-completed canine dermatitis QoL and TS questionnaire (CDQoL-TSQ) in allergic dogs.

MATERIALS AND METHODS

The CDQoL-TSQ was drafted following review of existing measures and expert input. Content validity was assessed through interviews with owners of allergic dogs. Psychometric properties of the QoL domains (Canine QoL, Owner QoL) were evaluated. Score interpretation was derived.

RESULTS

Twenty dog owners were interviewed. Item wording was amended following the first 10 interviews. Data from 211 owners were used in the psychometric evaluation. The Canine QoL domain demonstrated strong internal consistency (α = 0.89), test-retest reliability (ICC2,1  = 0.844), moderate convergent validity (r = 0.41) and moderate-high known-groups validity (effect size 0.37-0.64). The Owner QoL domain demonstrated strong internal consistency (α = 0.73), high convergent validity (r = 0.63) and moderate-high known-groups validity (0.43-0.63). Test-retest reliability approached moderate strength (ICC2,1  = 0.490). Group-level interpretation analysis showed minimal important difference of 7.0-13.6 points for dogs and 13.0-13.6 for owners. For individual dogs a change of 6.3 or 12.5 points for dogs, and 12.5 or 18.8 for owners indicates a response.

CONCLUSIONS AND CLINICAL RELEVANCE

The CDQOL-TSQ is a two-part assessment to evaluate QoL and TS in canine allergic dermatitis. The QoL questionnaire demonstrated validity and reliability, and interpretation of scores was derived, making it suitable for use in research and practice. The TS module is suitable for clinical setting use to improve owner-veterinarian communication.

Use of the European Organisation for Research and Treatment of Cancer multiple myeloma module (EORTC QLQ-MY20): a review of the literature 25 years after development

The European Organisation for Research and Treatment of Cancer Quality of Life Multiple Myeloma Questionnaire (EORTC QLQ-MY20) was developed in 1996 to assess health-related quality of life (HRQoL) in patients with multiple myeloma. Since its development new therapies have prolonged survival in patients with myeloma and new combination agents are likely to impact HRQoL outcomes and its measurement.The aim of this review was to explore the use of the QLQ-MY20 and reported methodological issues.An electronic database search was conducted (1996-June 2020) to identify clinical studies/research that used the QLQ-MY20 or assessed its psychometric properties. Data were extracted from full-text publications/conference abstracts and checked by a second rater.The search returned 65 clinical and 9 psychometric validation studies. The QLQ-MY20 was used in interventional (n = 21, 32%) and observational (n = 44, 68%) studies and the publication of QLQ-MY20 data in clinical trials increased over time. Clinical studies commonly included relapsed patients with myeloma patients (n = 15, 68%) and assessed a range of combinations therapies.QLQ-MY20 subscales (disease symptoms [DS], side effects of treatment [SE], future perspectives [FP], body image [BI]) were defined as secondary (n = 12, 55%) or exploratory (n = 7, 32%) trial endpoints, particularly DS (n = 16, 72%) and SE (n = 16, 72%). Validation articles demonstrated that all domains performed well regarding internal consistency reliability (>0.7), test-reset reliability (intraclass correlation coefficient > =0.85), internal and external convergent and discriminant validity. Four articles reported a high percentage of ceiling effects in the BI subscale; all other subscales performed well regarding floor and ceiling effects.The EORTC QLQ-MY20 remains a widely used and psychometrically robust instrument. While no specific problems were identified from the published literature, qualitative interviews are ongoing to ensure new concepts and side effects are included that may arise from patients receiving novel treatments or from longer survival with multiple lines of treatment.

Implications of sample treatment on characterization of riverine dissolved organic matter

High-resolution mass spectrometry techniques are widely used in the environmental sciences to characterize natural organic matter and, when utilizing these instruments, researchers must make multiple decisions regarding sample pre-treatment and the instrument ionization mode. To identify how these choices alter organic matter characterization and resulting conclusions, we analyzed a collection of 17 riverine samples from East River, CO (USA) under four PPL-based Solid Phase Extraction (SPE) treatment and electrospray ionization polarity (e.g., positive and negative) combinations: SPE (+), SPE (-), non-SPE (-), and non-SPE (+). The greatest number of formula assignments were achieved with SPE-treated samples due to the removal of compounds that could interfere with ionization. Furthermore, the SPE (-) treatment captured the most formulas across the widest chemical compound diversity. In addition to a reduced number of assigned formulas, the non-SPE datasets resulted in altered thermodynamic interpretations that could cascade into incomplete assumptions about the availability of organic matter pools for heterotrophic microbial respiration. Thus, we infer that the SPE (-) treatment is the best single method for characterizing environmental organic matter pools unless the focus is on lipid-like compounds, in which case we recommend a combination of SPE (-) and SPE (+) to adequately characterize these molecules.

Ecological theory applied to environmental metabolomes reveals compositional divergence despite conserved molecular properties

Stream and river systems transport and process substantial amounts of dissolved organic matter (DOM) from terrestrial and aquatic sources to the ocean, with global biogeochemical implications. However, the underlying mechanisms affecting the spatiotemporal organization of DOM composition are under-investigated. To understand the principles governing DOM composition, we leverage the recently proposed synthesis of metacommunity ecology and metabolomics, termed 'meta-metabolome ecology.' Applying this novel approach to a freshwater ecosystem, we demonstrated that despite similar molecular properties across metabolomes, metabolite identity significantly diverged due to environmental filtering and variations in putative biochemical transformations. We refer to this phenomenon as 'thermodynamic redundancy,' which is analogous to the ecological concept of functional redundancy. We suggest that under thermodynamic redundancy, divergent metabolomes can support equivalent biogeochemical function just as divergent ecological communities can support equivalent ecosystem function. As these analyses are performed in additional ecosystems, potentially generalizable concepts, like thermodynamic redundancy, can be revealed and provide insight into DOM dynamics.

Indoor Surface Chemistry: Developing a Molecular Picture of Reactions on Indoor Interfaces

Chemical reactions on indoor surfaces play an important role in air quality in indoor environments, where humans spend 90% of their time. We focus on the challenges of understanding the complex chemistry that takes place on indoor surfaces and identify crucial steps necessary to gain a molecular-level understanding of environmental indoor surface chemistry: (1) elucidate key surface reaction mechanisms and kinetics important to indoor air chemistry, (2) define a range of relevant and representative surfaces to probe, and (3) define the drivers of surface reactivity, particularly with respect to the surface composition, light, and temperature. Within the drivers of surface composition are the roles of adsorbed/absorbed water associated with indoor surfaces and the prevalence, inhomogeneity, and properties of secondary organic films that can impact surface reactivity. By combining laboratory studies, field measurements, and modeling we can gain insights into the molecular processes necessary to further our understanding of the indoor environment.

Microbial Methylation of Iodide in Unconfined Aquifer Sediments at the Hanford Site, USA

Incomplete knowledge of environmental transformation reactions limits our ability to accurately inventory and predictably model the fate of radioiodine. The most prevalent chemical species of iodine include iodate (IO₃⁻), iodide (I⁻), and organo-iodine. The emission of gaseous species could be a loss or flux term but these processes have not previously been investigated at radioiodine-impacted sites. We examined iodide methylation and volatilization for Hanford Site sediments from three different locations under native and organic substrate amended conditions at three iodide concentrations. Aqueous and gaseous sampling revealed methyl-iodide to be the only iodinated compound produced under biotic conditions. No abiotic transformations of iodide were measured. Methyl-iodide was produced by 52 out of 54 microcosms, regardless of prior exposure to iodine contamination or the experimental concentration. Interestingly, iodide volatilization activity was consistently higher under native (oligotrophic) Hanford sediment conditions. Carbon and nutrients were not only unnecessary for microbial activation, but supplementation resulted in >three-fold reduction in methyl-iodide formation. This investigation not only demonstrates the potential for iodine volatilization in deep, oligotrophic subsurface sediments at a nuclear waste site, but also emphasizes an important role for biotic methylation pathways to the long-term management and monitoring of radioiodine in the environment.

Exploring the science, safety, and benefits of air care products: perspectives from the inaugural air care summit

Seventy-one percent of US households purchase air care products. Air care products span a diverse range of forms, including scented aerosol sprays, pump sprays, diffusers, gels, candles, and plug-ins. These products are used to eliminate indoor malodors and to provide pleasant scent experiences. The use of air care products can lead to significant benefits as studies have shown that indoor malodor can cause adverse effects, negatively impacting quality of life, hygiene, and the monetary value of homes and cars, while disproportionately affecting lower income populations. Additionally, studies have also shown that scent can have positive benefits related to mood, stress reduction, and memory enhancement among others. Despite the positive benefits associated with air care products, negative consumer perceptions regarding the safety of air care products can be a barrier to their use. During the inaugural Air Care Summit, held on 18 May 2018 in the Washington, DC, metropolitan area, multidisciplinary experts including industry stakeholders, academics, and scientific and medical experts were invited to share and assess the existing data related to air care products, focusing on ingredient and product safety and the benefits of malodor removal and scent. At the Summit's completion, a panel of independent experts representing the fields of pulmonary medicine, medical and clinical toxicology, pediatric toxicology, basic science toxicology, occupational dermatology and experimental psychology convened to review the data presented, identify potential knowledge gaps, and suggest future research directions to further assess the safety and benefits of air care products.

Evaluation of emissions and exposures at workplaces using desktop 3-dimensional printer

There is a paucity of data on additive manufacturing process emissions and personal exposures in real-world workplaces. Hence, we evaluated atmospheres in four workplaces utilizing desktop "3-dimensional" (3-d) printers [fused filament fabrication (FFF) and sheer] for production, prototyping, or research. Airborne particle diameter and number concentration and total volatile organic compound concentrations were measured using real-time instruments. Airborne particles and volatile organic compounds were collected using time-integrated sampling techniques for off-line analysis. Personal exposures for metals and volatile organic compounds were measured in the breathing zone of operators. All 3-d printers that were monitored released ultrafine and fine particles and organic vapors into workplace air. Particle number-based emission rates (#/min) ranged from 9.4 × 109 to 4.4 × 1011 (n = 9samples) for FFF3-d printers and from 1.9 to 3.8 × 109 (n = 2 samples) for a sheer 3-d printer. The large variability in emission rate values reflected variability from the printers as well as differences in printer design, operating conditions, and feedstock materials among printers. A custom-built ventilated enclosure evaluated at one facility was capable of reducing particle number and total organic chemical concentrations by 99.7% and 53.2%, respectively. Carbonyl compounds were detected in room air; however, none were specifically attributed to the 3-d printing process. Personal exposure to metals (aluminum, iron) and 12 different organic chemicals were all below applicable NIOSH Recommended Exposure Limit values, but results are not reflective of all possible exposure scenarios. More research is needed to understand 3-d printer emissions, exposures, and efficacy of engineering controls in occupational settings.

Reactive indoor air chemistry and health-A workshop summary

The chemical composition of indoor air changes due to the reactive nature of the indoor environment. Historically, only the stable parent compounds were investigated due to their ease of measurement by conventional methods. Today, however, scientists can better characterize oxidation products (gas and particulate-phase) formed by indoor chemistry. An understanding of occupant exposure can be developed through the investigation of indoor oxidants, the use of derivatization techniques, atmospheric pressure detection, the development of real-time technologies, and improved complex modeling techniques. Moreover, the connection between exposure and health effects is now receiving more attention from the research community. Nevertheless, a need still exists for improved understanding of the possible link between indoor air chemistry and observed acute or chronic health effects and long-term effects such as work-related asthma.

Identification and quantification of carbonyl-containing α-pinene ozonolysis products using O-tert-butylhydroxylamine hydrochloride

The yields of carbonyl-containing reaction products from the ozonolysis of α-pinene have been investigated using concentrations of ozone found in the indoor environment ([O₃] ≤ 100 ppb). An impinger was used to collect gas-phase oxidation products in water, where the derivatization agent O-tert-butylhydroxylamine hydrochloride (TBOX) and gas chromatography-mass spectrometry were used to identify carbonyl-containing species. Seven carbonyl-containing products were observed. The yield of the primary product, pinonaldehyde was measured to be 76 %. Using cyclohexane as a hydroxyl radical (OH) scavenger, the yield of pinonaldehyde decreased to 46 %, indicating the influence secondary OH radicals have on α-pinene ozonolysis products. Furthermore, the use of TBOX, a small molecular weight derivatization agent, allowed for the acquisition of the first mass spectral data of oxopinonaldehyde, a tricarbonyl reaction product of α-pinene ozonolysis. The techniques described herein allow for an effective method for the collection and identification of terpene oxidation products in the indoor environment.

Diacetyl and 2,3-pentanedione exposure of human cultured airway epithelial cells: Ion transport effects and metabolism of butter flavoring agents

Inhalation of butter flavoring by workers in the microwave popcorn industry may result in “popcorn workers' lung.” In previous in vivo studies rats exposed for 6 h to vapor from the flavoring agents, diacetyl and 2,3-pentanedione, acquired flavoring concentration-dependent damage of the upper airway epithelium and airway hyporeactivity to inhaled methacholine. Because ion transport is essential for lung fluid balance,we hypothesized that alterations in ion transport may be an early manifestation of butter flavoring-induced toxicity.We developed a system to expose cultured human bronchial/tracheal epithelial cells (NHBEs) to flavoring vapors. NHBEs were exposed for 6 h to diacetyl or 2,3-pentanedione vapors (25 or ≥ 60 ppm) and the effects on short circuit current and transepithelial resistance (Rt) were measured. Immediately after exposure to 25 ppm both flavorings reduced Na+ transport,without affecting Cl- transport or Na+,K+-pump activity. Rt was unaffected. Na+ transport recovered 18 h after exposure. Concentrations (100-360 ppm) of diacetyl and 2,3-pentanedione reported earlier to give rise in vivo to epithelial damage, and 60 ppm, caused death of NHBEs 0 h post-exposure. Analysis of the basolateral medium indicated that NHBEs metabolize diacetyl and 2,3-pentanedione to acetoin and 2-hydroxy-3-pentanone, respectively. The results indicate that ion transport is inhibited transiently in airway epithelial cells by lower concentrations of the flavorings than those that result in morphological changes of the cells in vivo or in vitro.

Evaluation of the hypersensitivity potential of alternative butter flavorings

Concern has been raised over the association of diacetyl with lung disease clinically resembling bronchiolitis obliterans in food manufacturing workers. This has resulted in the need for identification of alternative chemicals to be used in the manufacturing process. Structurally similar chemicals, 2,3-pentanedione, 2,3-hexanedione, 3,4-hexanedione and 2,3-heptanedione, used as constituents of synthetic flavoring agents have been suggested as potential alternatives for diacetyl, however, immunotoxicity data on these chemicals are limited. The present study evaluated the dermal irritation and sensitization potential of diacetyl alternatives using a murine model. None of the chemicals were identified as dermal irritants when tested at concentrations up to 50%. Similar to diacetyl (EC3=17.9%), concentration-dependent increases in lymphocyte proliferation were observed following exposure to all four chemicals, with calculated EC3 values of 15.4% (2,3-pentanedione), 18.2% (2,3-hexanedione), 15.5% (3,4-hexanedione) and 14.1% (2,3-heptanedione). No biologically significant elevations in local or total serum IgE were identified after exposure to 25-50% concentrations of these chemicals. These results demonstrate the potential for development of hypersensitivity responses to these proposed alternative butter flavorings and raise concern about the use of structurally similar replacement chemicals. Additionally, a contaminant with strong sensitization potential was found in varying concentrations in diacetyl obtained from different producers.

Toxicological analysis of limonene reaction products using an in vitro exposure system

Epidemiological investigations suggest a link between exposure to indoor air chemicals and adverse health effects. Consumer products contain reactive chemicals which can form secondary pollutants which may contribute to these effects. The reaction of limonene and ozone is a well characterized example of this type of indoor air chemistry. The studies described here characterize an in vitro model using an epithelial cell line (A549) or differentiated epithelial tissue (MucilAir™). The model is used to investigate adverse effects following exposure to combinations of limonene and ozone. In A549 cells, exposure to both the parent compounds and reaction products resulted in alterations in inflammatory cytokine production. A one hour exposure to limonene+ozone resulted in decreased proliferation when compared to cells exposed to limonene alone. Repeated dose exposures of limonene or limonene+ozone were conducted on MucilAir™ tissue. No change in proliferation was observed but increases in cytokine production were observed for both the parent compounds and reaction products. Factors such as exposure duration, chemical concentration, and sampling time point were identified to influence result outcome. These findings suggest that exposure to reaction products may produce more severe effects compared to the parent compound.

[Clinico-pathological correlations: posterior compartment of the eye and orbit]

Diseases of the posterior compartment and the orbit are characterised by histological findings, most of which can be reproduced clinically. Examples are the examination of calcifications in retinoblastoma by ultrasonography. In the present review, histological findings of tumour and other diseases of the posterior ocular compartment and the orbit are presented and correlated with the clinical pictures and imaging techniques: uveal melanoma, choroidal nevus, choroidal metastases, choroidal hemangioma, retinoblastoma, Coat's disease, sympathetic ophthalmia, pleomorphic adenoma (benign mixed tumour) of the lacrimal gland, dacryoadenitis, lymphoma, rhabdomyosarcoma, Langerhans cell histiocytosis, orbital metastases, and phthisical eyes. Histopathology is usually the gold standard for a definitive diagnosis. It is very important for residents and those in training to become familiar with clinico-pathological correlations as these provide insight in pathophysiological processes. Regarding ophthalmic surgery, ophthalmic pathology offers the possibility to study wound healing and complications. A close collaboration between clinicians and ocular pathologists allows for an optimised processing of the submitted tissue and diagnosis. Thus, pre- and postoperative care can also be improved. This outstanding knowledge that ophthalmologists have gained over the last decades and beyond, should be preserved and passed on to the next generations in order to maintain a high standard in ophthalmological care.

2-Butoxyethanol and Benzyl Alcohol Reactions with the Nitrate Radical: Rate Coefficients and Gas-Phase Products

The bimolecular rate coefficients [Formula: see text] and [Formula: see text] were measured using the relative rate technique at (297 ± 3) K and 1 atmosphere total pressure. Values of (2.7 ± 0.7) and (4.0 ± 1.0) × 10^-15 cm³ molecule^-1 s^-1 were observed for [Formula: see text] and [Formula: see text], respectively. In addition, the products of [Formula: see text] and [Formula: see text] gas-phase reactions were investigated. Derivatizing agents O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine and N, O-bis (trimethylsilyl)trifluoroacetamide and gas chromatography mass spectrometry (GC/MS) were used to identify the reaction products. For [Formula: see text] reaction: hydroxyacetaldehyde, 3-hydroxypropanal, 4-hydroxybutanal, butoxyacetaldehyde, and 4-(2-oxoethoxy)butan-2-yl nitrate were the derivatized products observed. For the [Formula: see text] reaction: benzaldehyde ((C₆H₅)C(=O)H) was the only derivatized product observed. Negative chemical ionization was used to identify the following nitrate products: [(2-butoxyethoxy)(oxido)amino]oxidanide and benzyl nitrate, for [Formula: see text] and [Formula: see text], respectively. The elucidation of these products was facilitated by mass spectrometry of the derivatized reaction products coupled with a plausible 2-butoxyethanol or [Formula: see text] reaction mechanisms based on previously published [Formula: see text] gas-phase mechanisms.

Irritancy and allergic responses induced by exposure to the indoor air chemical 4-oxopentanal

Over the last two decades, there has been an increasing awareness regarding the potential impact of indoor air pollution on human health. People working in an indoor environment often experience symptoms such as eye, nose, and throat irritation. Investigations into these complaints have ascribed the effects, in part, to compounds emitted from building materials, cleaning/consumer products, and indoor chemistry. One suspect indoor air contaminant that has been identified is the dicarbonyl 4-oxopentanal (4-OPA). 4-OPA is generated through the ozonolysis of squalene and several high-volume production compounds that are commonly found indoors. Following preliminary workplace sampling that identified the presence of 4-OPA, these studies examined the inflammatory and allergic responses to 4-OPA following both dermal and pulmonary exposure using a murine model. 4-OPA was tested in a combined local lymph node assay and identified to be an irritant and sensitizer. A Th1-mediated hypersensitivity response was supported by a positive response in the mouse ear swelling test. Pulmonary exposure to 4-OPA caused a significant elevation in nonspecific airway hyperreactivity, increased numbers of lung-associated lymphocytes and neutrophils, and increased interferon-γ production by lung-associated lymph nodes. These results suggest that both dermal and pulmonary exposure to 4-OPA may elicit irritant and allergic responses and may help to explain some of the adverse health effects associated with poor indoor air quality.

Use of denuder/filter apparatus to investigate terpene ozonolysis

A denuder/filter apparatus was used to collect the gaseous and particulate reaction products from ozonlysis of α-pinene, limonene and α-terpineol in an effort to develop sampling techniques for characterizing indoor environment chemistry. Carboxylic acids found in the particulate phase were derivatized to 2,2,2-trifuoroethylamides by reaction with 3-ethyl-1-[3-(dimethylamino)propyl]carbodiimide hydrochloride (EDC) and 2,2,2-trifluoroethylamine hydrochloride (TFEA). Carbonyl compounds collected in both gas phase and particulate phase were derivatized to their respective oximes by reaction with O-(2,3,4,5,6-pentafluoro-benzyl)hydroxylamine hydrochloride (PFBHA). The ozonolysis of α-pinene yielded the carboxylic acids: cis-pinonic acid and pinic acid and the proposed carboxylic acids methanetricarboxylic acid and terpenylic acid; the carbonyls: 4-oxopentanal, norpinonaldehyde, pinon aldehyde and the proposed carbonyl methylidenepropanedial. The ozonolysis of limonene yielded the carboxylic acids: limonic acid and pinic acid and the carbonyls: 1-(4-methylcyclohex-3-en-1-yl)ethanone (4AMCH), glyoxal, methyl glyoxal, 4-oxopentanal and 6-oxo-3-(prop-1-en-2-yl)heptanal (IPOH). The ozonolysis of α-terpineol yielded the proposed carboxylic acids: terpenylic acid and homoterpenylic acid and the carbonyls: (5E)-6-hydroxyhept-5-en-2-one, methyl glyoxal and 4-oxopentanal.

Hydroxyl radical yields from reactions of terpene mixtures with ozone

Chamber studies were conducted to quantify hydroxyl radical (OH·) yields and to determine whether water vapor affected OH· formation in the reactions of ozone (O(3)) with a single terpene, two-component terpene mixtures, and a commercial pine oil cleaning product (POC). Solid-phase microextraction fibers (SPME) were used for sampling the terpenes and the 2-butanone formation from the hydroxyl reaction with 2-butanol as a measure of OH· yields. Analyses were performed using gas chromatography with flame ionization detection. The individual terpenes' OH· yields from α-terpineol, limonene, and α-pinene were 64 ± 8%, 64 ± 6%, and 76 ± 6%, respectively. OH· yields were also measured from two-component mixtures of these terpenes. In each mixture that contained α-terpineol, the overall OH· yield was lower than the modeled OH· yields of the individual components that comprised the reaction mixture. Reactions of a commercial POC with O(3) were also studied to determine how the individual terpenes react in a complex mixture system, and an OH· formation yield of 51 ± 6% was measured. Relative humidity did not have a significant effect on the OH· formation in the mixtures studied here.

PRACTICAL IMPLICATIONS

The data presented here demonstrate that mixtures may react differently than the sum of their individual components. By investigating the chemistry of mixtures of chemicals in contrast to the chemistry of individual compounds, a better assessment can be made of the overall impact cleaning products have on indoor environments.

Reaction rates of ozone and terpenes adsorbed to model indoor surfaces

Reaction rates and reaction probabilities have been quantified on model indoor surfaces for the reaction of ozone with two monoterpenes (Δ(3) -carene and d-limonene). Molar surface loadings were obtained by performing breakthrough experiments in a plug-flow reactor (PFR) packed with beads of glass, polyvinylchloride or zirconium silicate. Reaction rates and probabilities were determined by equilibrating the PFR with both the terpene and the ozone and measuring the ozone consumption rate. To mimic typical indoor conditions, temperatures of 20, 25, and 30°C were used in both types of experiments along with a relative humidity ranging from 10% to 80%. The molar surface loading decreased with increased relative humidity, especially on glass, suggesting that water competed with the terpenes for adsorption sites. The ozone reactivity experiments indicate that higher surface loadings correspond with higher ozone uptake. The reaction probability for Δ(3) -carene with ozone ranged from 2.9 × 10(-6) to 3.0 × 10(-5) while reaction probabilities for d-limonene ranged from 2.8 × 10(-5) to 3.0 × 10(-4) . These surface reaction probabilities are roughly 10-100 times greater than the corresponding gas-phase values. Extrapolation of these results to typical indoor conditions suggests that surface conversion rates may be substantial relative to gas-phase rates, especially for lower volatility terpenoids.

PRACTICAL IMPLICATIONS

At present, it is unclear how important heterogeneous reactions will be in influencing indoor concentrations of terpenes, ozone and their reaction products. We observe that surface reaction probabilities were 10 to 100 times greater than their corresponding gas-phase values. Thus indoor surfaces do enhance effective reaction rates and adsorption of terpenes will increase ozone flux to otherwise low-reactivity surfaces. Extrapolation of these results to typical indoor conditions suggests that surface conversion rates may be substantial relative to gas-phase rates, especially for lower volatility terpenoids.

THE SPECIFICITY OF KERATINS

Kerateine and metakeratin were prepared from wool, chicken feathers and human hair. Chemical analyses revealed that the compounds are closely related. The results of serological studies disclose that species specificity is an individual characteristic of the keratins employed and that the specificity observed is dependent on the redox state of the sulfhydryl groupings in the protein molecule.

Evaluation of dicarbonyls generated in a simulated indoor air environment using an in vitro exposure system

Over the last two decades, there has been increasing awareness regarding the potential impact of indoor air pollution on health. Exposure to volatile organic compounds (VOCs) or oxygenated organic compounds formed from indoor chemistry has been suggested to contribute to adverse health effects. These studies use an in vitro monitoring system called VitroCell, to assess chemicals found in the indoor air environment. The structurally similar dicarbonyls diacetyl, 4-oxopentanal (4-OPA), glyoxal, glutaraldehyde, and methyl glyoxal were selected for use in this system. The VitroCell module was used to determine whether these dicarbonyls were capable of inducing inflammatory cytokine expression by exposed pulmonary epithelial cells (A549). Increases in the relative fold change in messenger RNA expression of the inflammatory mediators, interleukin (IL)-6, IL-8, granulocyte-macrophage colony-stimulating factor (GM-CSF), and tumor necrosis factor alpha (TNF-alpha) were identified following exposure to diacetyl, 4-OPA, glyoxal, glutaraldehyde, and methyl glyoxal when compared to a clean air control. Consistent results were observed when the protein levels of these cytokines were analyzed. Exposure to 4-OPA significantly elevated IL-8, IL-6, GM-CSF, and TNF-alpha while glutaraldehyde caused significant elevations in IL-6, IL-8, and TNF-alpha. IL-6 and IL-8 were also significantly elevated after exposure to diacetyl, glyoxal, and methyl glyoxal. These studies suggest that exposure to structurally similar oxygenated reaction products may be contributing to some of the health effects associated with indoor environments and may provide an in vitro method for identification and characterization of these potential hazards.

Investigating ozone-induced decomposition of surface-bound permethrin for conditions in aircraft cabins

The reaction of ozone with permethrin can potentially form phosgene. Published evidence on ozone levels and permethrin surface concentrations in aircraft cabins indicated that significant phosgene formation might occur in this setting. A derivatization technique was developed to detect phosgene with a lower limit of detection of 2 ppb. Chamber experiments were conducted with permethrin-coated materials (glass, carpet, seat fabric, and plastic) exposed to ozone under cabin-relevant conditions (150 ppb O(3), 4.5/h air exchange rate, <1% relative humidity, 1700 ng/cm(2) of permethrin). Phosgene was not detected in these experiments. Reaction of ozone with permethrin appears to be hindered by the electron-withdrawing chlorine atoms adjacent to the double bond in permethrin. Experimental results indicate that the upper limit on the reaction probability of ozone with surface-bound permethrin is approximately 10(-7). Extrapolation by means of material-balance modeling indicates that the upper limit on the phosgene level in aircraft cabins resulting from this chemistry is approximately 1 microg/m(3) or approximately 0.3 ppb. It was thus determined that phosgene formation, if it occurs in aircraft cabins, is not likely to exceed relevant, health-based phosgene exposure guidelines.

PRACTICAL IMPLICATIONS

Phosgene formation from ozone-initiated oxidation of permethrin in the aircraft cabin environment, if it occurs, is estimated to generate levels below the California Office of Environmental Health Hazard Assessment acute reference exposure level of 4 microg/m(3) or approximately 1 ppb.

Surface chemistry reactions of alpha-terpineol [(R)-2-(4-methyl-3-cyclohexenyl)isopropanol] with ozone and air on a glass and a vinyl tile

The surface-phase reaction products of alpha-terpineol [(R)-2-(4-methyl-3-cyclohexenyl)isopropanol] with ozone (O(3)), air or nitrogen (N(2)) on both a glass and vinyl flooring tile were investigated using the recently published FLEC Automation and Control System (FACS). The FACS was used to deliver O(3) (100 ppb), air or N(2) to the surface at a specified flow rate (300 ml/min) and relative humidity (50%) after application of a 1.6%alpha-terpineol solution in methanol. Oxidation products were detected using the derivatization agents: O-(2,3,4,5,6-pentafluorobenzyl) hydroxylamine and N,O-bis(trimethysilyl)trifluoroacetamide. The positively identified reaction products were glyoxal, methylglyoxal and 4-oxopentanal. The proposed oxidation products based on previously published VOC/O(3) reaction mechanisms were: 4-methylcyclohex-3-en-1-one, 6-hydroxyhept-en-2-one, 3-(1-hydroxy-1-methylethyl)-6-methylcyclohex-2-en-1-one) and one surface-enhanced reaction product: 5-(1-hydroxy-1-methylethyl)-2-methylcyclohex-2-en-1-one. Though similar products were observed in gas-phase alpha-terpineol/O(3) reactions, the ratio of the reaction products were different suggesting stabilization of larger molecular weight species by the surface. Emission profiles of these oxidation products over 72 h are also reported.

PRACTICAL IMPLICATIONS

Volatile organic compounds (VOCs) can interact with indoor initiators [such as hydroxyl radicals (OH*), ozone and nitrate radicals (NO(3)*)] to form a number of oxygenated by-products in the gas-phase. However, when VOCs are applied to or are present on the surface, heterogeneous chemistry with indoor initiators can also occur. The surface can influence the reaction mechanism to produce new surface reaction products. The work, described here, shows the interaction of alpha-terpineol (major component of pine oil) with ozone and air on both glass and vinyl flooring. These results demonstrated emissions of oxygenated organic compounds as a result of reaction and that further investigations of this chemistry are required to accurately estimate indoor occupant exposures.

Feasibility of detection and quantification of gas-phase carbonyls in indoor environments using PFBHA derivatization and solid-phase microextraction (SPME)

Solid-phase microextraction (SPME) was evaluated for the detection and quantification of the gas-phase carbonyls: citronellal, glyoxal, methylglyoxal, and beta-ionone. Prepared air samples containing the carbonyl compounds were collected at a flow rate of 2.8 L min(-1) in an impinger containing a 25% reagent water/75% methanol collection liquid. The aqueous samples were then derivatized with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA), extracted with a PDMS/DVB coated SPME fiber, and analyzed by GC-MS. Detection limits with a sample air volume of 76 L were calculated to be 0.03 ppbv, 0.34 ppbv, 0.12 ppbv, and 0.28 ppbv for citronellal, glyoxal, methylglyoxal, and beta-ionone, respectively.

Field and laboratory emission cell automation and control system for investigating surface chemistry reactions

A novel system [field and laboratory emission cell (FLEC) automation and control system] has been developed to deliver ozone to a surface utilizing the FLEC to simulate indoor surface chemistry. Ozone, humidity, and air flow rate to the surface were continuously monitored using an ultraviolet ozone monitor, humidity, and flow sensors. Data from these sensors were used as feedback for system control to maintain predetermined experimental parameters. The system was used to investigate the chemistry of ozone with alpha-terpineol on a vinyl surface over 72 h. Keeping all other experimental parameters the same, volatile organic compound emissions from the vinyl tile with alpha-terpineol were collected from both zero and 100 ppb (parts per 10(9)) ozone exposures. System stability profiles collected from sensor data indicated experimental parameters were maintained to within a few percent of initial settings. Ozone data from eight experiments at 100 ppb (over 339 h) provided a pooled standard deviation of 1.65 ppb and a 95% tolerance of 3.3 ppb. Humidity data from 17 experiments at 50% relative humidity (over 664 h) provided a pooled standard deviation of 1.38% and a 95% tolerance of 2.77%. Data of the flow rate of air flowing through the FLEC from 14 experiments at 300 ml/min (over 548 h) provided a pooled standard deviation of 3.02 ml/min and a 95% tolerance range of 6.03 ml/min. Initial experimental results yielded long term emissions of ozone/alpha-terpineol reaction products, suggesting that surface chemistry could play an important role in indoor environments.

Use of solid-phase microextraction to detect and quantify gas-phase dicarbonyls in indoor environments

Solid-phase microextraction (SPME) was evaluated for the detection and quantification of the gas-phase dicarbonyls, glyoxal (GLY) and methylglyoxal (MGLY). Additionally, polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB), and carbowax/divinylbenzene (CW/DVB) fibers were tested to determine the optimum fiber for detection of these species. GLY and MGLY were derivatized with O-(2,3,4,5,6-pentafluorobenzyl)-hydroxylamine hydrochloride (PFBHA), extracted with SPME from headspace or bag chamber and then analyzed by GC/MS. The PDMS/DVB SPME fiber for on-fiber derivatization and subsequent sampling for gas-phase methylglyoxal provided the optimum combination of analytical reproducibility and sensitivity. Linearity of the calibration curve was achieved across a range of 11-222 microg/m(3) (4-75 ppb).

Purification and properties of a proteolytic enzyme from French beans

1. A proteolytic enzyme with some features of a carboxypeptidase has been purified some 1180-fold from the sap of French beans (Phaseolus vulgaris var. Prince). A bright blue protein, plastocyanin, was separated from the enzyme by DEAE-cellulose chromatography. 2. Unlike carboxypeptidase A or B of animal origin, there is no evidence that the enzyme is a metalloprotein. There was no stimulation of activity by a number of metal ions, reducing agents or 2-mercapto-ethanol. Neither EDTA nor 1,10-o-phenanthroline inhibited the enzyme. 3. The proteolytic enzyme from beans, readily soluble at neutral or slightly acidic pH values, has a pH optimum of pH5.6 for the hydrolysis of leucine from benzyloxy-carbonylglycyl-l-leucine. Solutions of the enzyme in 0.1m-sodium acetate, pH5.5, lose about 2% of their activity/week at 4 degrees . Virtually no loss of activity results after prolonged storage at -15 degrees . 4. Incubation of the bean enzyme with peptides indicates that the enzyme will release acidic, neutral and basic amino acid residues as well as proline, although adjacent acidic residues in a peptide appear to inhibit the enzyme. The possibility of endopeptidase activity in the purified preparation requires further examination.

Workgroup report: Indoor chemistry and health

Chemicals present in indoor air can react with one another, either in the gas phase or on surfaces, altering the concentrations of both reactants and products. Such chemistry is often the major source of free radicals and other short-lived reactive species in indoor environments. To what extent do the products of indoor chemistry affect human health? To address this question, the National Institute for Occupational Safety and Health sponsored a workshop titled "Indoor Chemistry and Health" on 12-15 July 2004 at the University of California-Santa Cruz. Approximately 70 experts from eight countries participated. Objectives included enhancing communications between researchers in indoor chemistry and health professionals, as well as defining a list of priority research needs related to the topic of the workshop. The ultimate challenges in this emerging field are defining exposures to the products of indoor chemistry and developing an understanding of the links between these exposures and various health outcomes. The workshop was a step toward meeting these challenges. This summary presents the issues discussed at the workshop and the priority research needs identified by the attendees.

Gas-phase chemistry of (alpha-terpineol with ozone and OH radical: rate constants and products

A bimolecular rate constant, kOH+alpha-terpineol, of (1.9 +/- 0.5) x 10(-10) cm3 molecule(-1) s(-1) was measured using gas chromatography/mass spectrometry and the relative rate technique for the reaction of the hydroxyl radical (OH) with alpha-terpineol (1-methyl-4-isopropyl-1-cyclohexen-8-ol) at (297 +/- 3) K and 1 atm total pressure. Additionally, a bimolecular rate constant, kO3+alpha-terpineol, of (3.0 +/- 0.2) x 10(-16) cm3 molecule(-1) s(-1) was measured by monitoring the first order decrease in ozone concentration as a function of excess alpha-terpineol. To better understand alpha-terpineol's gas-phase transformation in the indoor environment, the products of the alpha-terpineol + OH and alpha-terpineol + 03 reactions were also investigated. The positively identified alpha-terpineol/OH reaction products were acetone, ethanedial (glyoxal, HC(=O)C(=O)H), and 2-oxopropanal (methyl glyoxal, CH3C(=O)C(=O)H). The positively identified alpha-terpineol/O3 reaction product was 2-oxopropanal (methyl glyoxal, CH3C(=O)C(=O)H). The use of derivatizing agents O-(2,3,4,5,6-pentalfluorobenzyl)hydroxylamine (PFBHA) and N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) clearly indicated that several other reaction products were formed. The elucidation of these other reaction products was facilitated by mass spectrometry of the derivatized reaction products coupled with plausible alpha-terpineol/OH and alpha-terpineol/O3 reaction mechanisms based on previously published volatile organic compound/ OH and volatile organic compound/O3 gas-phase reaction mechanisms.

Histone variant H2A.Z is required for early mammalian development

Fundamental to the process of mammalian development is the timed and coordinated regulation of gene expression. This requires transcription of a precise subset of the total complement of genes. It is clear that chromatin architecture plays a fundamental role in this process by either facilitating or restricting transcription factor binding [1]. How such specialized chromatin structures are established to regulate gene expression is poorly understood. All eukaryotic organisms contain specialized histone variants with distinctly different amino acid sequences that are even more conserved than the major core histones [2]. On the basis of their highly conserved sequence, histone variants have been assumed critical for the function of mammalian chromatin; however, a requirement for a histone variant has not been shown in mammalian cells. Mice with a deletion of H1 degrees have been generated by gene targeting in ES cells, but these mice show no phenotypic consequences, perhaps due to redundancy of function [3]. Here we show for the first time that a mammalian histone variant, H2A.Z, plays a critical role in early development, and we conclude that this histone variant plays a pivotal role in establishing the chromatin structures required for the complex patterns of gene expression essential for normal mammalian development.

Esophageal dysmotility as an important co-factor in extraesophageal manifestations of gastroesophageal reflux

OBJECTIVE

Esophageal motility problems have been demonstrated in patients with noninflammatory typical gastroesophageal reflux (GER) and esophagitis, but the frequency of motility disorders in patients with extraesophageal manifestations of GER has not been studied. The primary aim of this study was to assess the frequency of esophageal motility disorders in patients with atypical GER.

METHODS

A prospective study of 112 consecutive patients with laryngopharyngeal reflux (LPR) symptoms and demonstrated physical findings consistent with LPR were studied. Patients were divided into one of the following diagnostic categories: hoarseness; chronic cough; dysphagia or globus pharyngeus; and paroxysmal laryngospasm. Of the 112 patients, 81 (72%) underwent esophageal manometry and ambulatory 24-hour pH monitoring (pH-metry), 19 (17%) had motility studies only, and 12 (11%) had pH-metry studies only. Only patients who had motility studies were included in the analysis. Therefore the study population was 100 patients. Associations between diagnostic category, motility disorder, and abnormal reflux were evaluated with contingency-table analyses.

RESULTS

Of the 100 patients, 29 (29%) presented normal motility function, 48 (48%) had ineffective esophageal motility, 10 (10%) had hypertensive lower esophageal sphincter (LES), and 9 (9%) and 4 (4%) had nutcracker esophagus and achalasia, respectively. There was a significant association between esophageal dysmotility and extraesophageal manifestations of GER However, there was no statistically significant association between esophageal motility disorders and abnormal acid reflux in our patients with atypical GER.

CONCLUSIONS

In the present study, the frequency of esophageal motility problems in patients with extraesophageal or atypical manifestations of GER was 73% and suggested that these problems exist as an accompanying condition or pathogenic co-factor in some patients with atypical GER.

Regions of variant histone His2AvD required for Drosophila development

One way in which a distinct chromosomal domain could be established to carry out a specialized function is by the localized incorporation of specific histone variants into nucleosomes. H2AZ, one such variant of the histone protein H2A, is required for the survival of Drosophila melanogaster, Tetrahymena thermophila and mice (R. Faast et al., in preparation). To search for the unique features of Drosophila H2AZ (His2AvD, also referred to as H2AvD) that are required for its essential function, we have performed amino-acid swap experiments in which residues unique to Drosophila His2AvD were replaced with equivalently positioned Drosophila H2A.1 residues. Mutated His2AvD genes encoding modified versions of this histone were transformed into Drosophila and tested for their ability to rescue null-mutant lethality. We show that the unique feature of His2AvD does not reside in its histone fold but in its carboxy-terminal domain. This C-terminal region maps to a short alpha-helix in H2A that is buried deep inside the nucleosome core.

A H1 histone gene-specific AC-box-related element influences transcription from a major chicken H1 promoter

In comparing several histone H1 promoters, we have identified a highly conserved sequence element, 5'-TGTGTTA, located approx. 450-480 bp upstream from the cap site. This TG-box is a near perfect inverted repeat of the previously characterized AC-box (5'-AAACACA). The distance between these elements is also highly conserved. We performed transient transfection assays with cat gene reporter constructs which indicated that both the presence and correct position of the TG-box were essential for maximal expression of the chicken 02 H1 promoter. To the best of our knowledge, this study represents the first demonstration of an effect by the TG-box on transcription of a major histone-encoding H1 gene.

An unusual arrangement of 13 zinc fingers in the vertebrate gene Z13

The zinc finger is a protein domain that imparts specific nucleic acid-binding activity on a wide range of functionally important proteins. In this paper we report the molecular cloning and characterization of a novel murine zinc-finger gene, mZ13. Analysis of mZ13 cDNAs revealed that the gene expresses a 794-amino-acid protein encoded by a 2.7 kb transcript. The protein has an unusual arrangement of 13 zinc fingers into a 'hand' of 12 tandem fingers and a single isolated finger near the C-terminus. This structural organization is conserved with the probable chicken homologue, cZ13. mZ13 also contained an additional domain at the N-terminus which has previously been implicated in the regulation of zinc-finger transcription factor DNA-binding, via protein-protein interactions. mZ13 expression was detected in a wide range of murine embryonic and adult tissues. The structural organization of mZ13 and its expression profile suggest that it may function as a housekeeping DNA-binding protein that regulates the expression of specific genes.

Evidence for involvement of the carboxy terminus of helix 1 of growth hormone in receptor binding: use of charge reversal mutagenesis to account for calcium dependence of binding and for design of higher affinity analogues

In this study we have demonstrated that the C-terminus of helix 1 of porcine GH (pGH) is a receptor-interactive region, thus extending the current binding site model of GH. This was achieved by introducing charge reversal mutations into this region of pGH, which influenced receptor affinity and Ca2+ dependence of binding. The first mutant (R34E pGH, conversion of Arg 34 to Glu) introduced a putative Ca2+ binding site which is present in human GH (hGH) [Barnard et al. (1989) J. Theor. Biol. 140, 355-367] and sits opposite E220 of receptor subunit 1. This mutant exhibited increased Ca2+ dependence of receptor binding but even at optimal Ca2+ did not display higher than wild-type affinity. Introduction of a second Ca2+ binding site adjacent to the first by a second charge reversal (K30E R34E pGH) further increased Ca2+ dependence of binding and also increased affinity for the rabbit GH receptor (2.4 +/- 0.4)-fold relative to wild-type pGH at optimal Ca2+. Equilibrium dialysis and Scatchard analysis of binding of 45Ca2+ to pGH and K30E R34E pGH revealed two Ca2+ binding sites on wild-type pGH and an additional two Ca2+ binding sites on the K30E R34E pGH mutant (Kd 0.5-0.8 mM), as predicted. A third partial charge reversal mutant in the fourth helix (H170D) also led to enhanced Ca2+ dependence of binding, supporting our proposal that E34 and D170 are responsible for the Ca2+ dependence of hGH binding to the rabbit GH receptor. Examination of the crystal structure shows that E34 and D170 are in close proximity and would interact repulsively with a cluster of acidic residues on the receptor consisting of E126, E127, and E220 unless neutralized by Ca2+ or an introduced basic residue. Accordingly, charge reversal at the adjacent pGH residue E33 (E33K pGH) led to a Ca2+ independent (3.0 +/- 0.4)-fold increase in affinity of binding. As well as extending the binding site model of GH, these studies provide a mechanistic explanation for the unique Ca2+ dependence of hGH binding to the rabbit GH receptor. They also indicate that charge reversal can be used to design higher affinity GH analogues and could assist in the mapping of interactive regions in ligand-receptor complexes generally.

Secretion of eukaryotic growth hormones in Escherichia coli is influenced by the sequence of the mature proteins

We report the construction of secretion plasmids expressing the fusion proteins, OmpA::pGH (pSpGH.01) and OmpA::hGH (phGH.01), and compare the secretion of mature porcine growth hormone (pGH) and human growth hormone (hGH) employing Escherichia coli. E. coli [phGH.01] secreted 10-15 micrograms hGH/ml/A600 cells into the periplasmic space, representing 30% of total periplasmic proteins. E. coli [pSpGH.01], however, secreted 30-fold less mature pGH. On the basis that both pSpGH.01 and phGH.01 are stably maintained in E. coli and in vitro transcription/translation data showed equivalent expression of OmpA::pGH and OmpA::hGH precursors, we attribute the higher secretion of hGH to the translocation-competent OmpA::hGH protein configuration. Two OmpA::GHF (growth hormone fusion) precursors, OmpA::GHF.02 and OmpA::GHF.03, both with hGH helix 3/helix 4 together instead of the pGH equivalent, secreted mature proteins as efficiently as OmpA::hGH. We propose that hGH helices 3 and 4 in these OmpA::GHF precursors play a major role in the folding of the precursor to a translocation-competent state, mimicking the translocation-competent nature of the OmpA::hGH precursor.

Novel recombinant fusion protein analogues of insulin-like growth factor (IGF)-I indicate the relative importance of IGF-binding protein and receptor binding for enhanced biological potency

An efficient expression system in Escherichia coli for several biologically active insulin-like growth factor-I (IGF-I) fusion peptide analogues is described. These novel IGF-I fusion protein analogues have properties that make them very useful reagents in the investigation of IGF-I action. The analogues comprise an IGF-I sequence and the first 11 amino acids of methionyl porcine growth hormone (pGH) and include [Met1]-pGH(1-11)-Val-Asn-IGF-I, which contains the authentic IGF-I sequence, and two analogues, [Met1]-pGH(1-11)-Val-Asn-[Gly3]-IGF-I and [Met1]-pGH(1-11)-Val-Asn-[Arg3]-IGF-I, where Glu-3 in the human IGF-I sequence has been replaced by Gly or Arg respectively. The three peptides are referred to as Long IGF-I, Long [Gly3]-IGF-I or Long [Arg3]-IGF-I depending on the IGF-I sequence present. Production of the purified fusion peptides was aided by folding the reduced and denatured fusion peptide sequence under conditions that gave very high yields of biologically active product. Introduction of a hydrophobic N-terminal extension peptide appears to facilitate the correct folding of the IGF-I analogues compared with that obtained previously when folding normal-length IGFs. The biological activities of the IGF-I fusion peptides were compared with authentic IGF-I and the truncated analogue, des(1-3)IGF-I. In L6 rat myoblasts, all the analogues were more potent than authentic IGF-I in their abilities to stimulate protein and DNA synthesis and inhibit protein breakdown. In H35 hepatoma cells, where the IGFs act through the insulin receptor, the Long IGF-I analogues maintained a similar potency relative to IGF-I as was observed in the L6 myoblasts. The order of biological potency in cell lines secreting IGF-binding proteins (IGFBPs) into the medium was Long [Arg3]-IGF-I-des(1-3)IGF-I greater than Long [Gly3]-IGF-I greater than Long IGF-I greater than IGF-I. In chicken embryo fibroblasts, a cell line that does not secrete detectable IGFBPs into the medium, Long [Arg3]-IGF-I, was less potent than IGF-I. Investigation of receptor and IGFBP association by these analogues reinforced our previous findings that N-terminal analogues of IGF-I show increased biological potency due to changes in the degree of their IGFBP interactions.

Sequence of a cDNA encoding chicken high-mobility-group protein-2

There are several members of the high-mobility-group (HMG) of DNA-binding proteins, including HMG-1, HMG-2, HMG-14 and HMG-17 [Johns: The HMG Chromosomal Proteins. Academic Press, London, 1982]. We report here sequences encoding the chicken HMG-2 protein of 207 amino acids (aa). This assignment is made on the basis of available data which indicate 89% homology of the chicken aa sequence to porcine HMG-2. This compares with 78-81% homology to the HMG-1 proteins of rat, hamster, human, porcine, and bovine origin.

Production and characterization of recombinant insulin-like growth factor-I (IGF-I) and potent analogues of IGF-I, with Gly or Arg substituted for Glu3, following their expression in Escherichia coli as fusion proteins

The development of an efficient expression system for insulin-like growth factor-I (IGF-I) in Escherichia coli as a fusion protein is described. The fusion protein consists of an N-terminal extension made up of the first 46 amino acids of methionyl porcine GH ([Met1]-pGH) followed by the dipeptide Val-Asn. The latter two residues provide a unique hydroxylamine-sensitive link between [Met1]-pGH(1-46) and the N-terminal Gly of IGF-I. Downstream processing of the fusion proteins involved isolation of inclusion bodies, cleavage at the Asn-Gly bond, refolding of the reduced IGF-I peptide and purification to homogeneity. This expression system was also used to produce two variants of IGF-I in which Glu3 was substituted by either Gly or Arg to give [Gly3]-IGF-I and [Arg3]-IGF-I respectively. Production of milligram quantities of IGF-I peptide was readily achieved. The purity of the IGF-I, [Gly3]-IGF-I and [Arg3]-IGF-I was established by high-performance liquid chromatography and N-terminal sequence analysis. [Gly3]-IGF-I and [Arg3]-IGF-I were more potent than IGF-I in biological assays measuring stimulation of protein synthesis and DNA synthesis or inhibition of protein breakdown in rat L6 myoblasts. Both analogues bound very poorly to bovine IGF-binding protein-2 and slightly less well than IGF-I to the type-1 receptor on rat L6 myoblasts. We conclude that reduced binding to IGF-binding proteins rather than increased receptor binding is the likely explanation for the greater biological potency of the analogues compared with IGF-I.

Identification of molecules involved in the 'early pregnancy factor' phenomenon

An isolated preparation from ovine placental extracts which was active in the rosette inhibition assay mimicking the activity of the so-called 'early pregnancy factor' (EPF) has been shown to contain a 12 kDa polypeptide which could be partially resolved from low-molecular-weight active moieties. N-terminal amino acid sequence analysis of the polypeptide indicated that it was ovine thioredoxin, an identification confirmed by isolation and complete sequence analysis of the corresponding cDNA. The cDNA for human thioredoxin was expressed in Escherichia coli and the recombinant protein isolated and purified. Pure recombinant thioredoxin alone did not induce the expression of increased rosette inhibition titres (RITs) when tested in the rosette inhibition assay; but, when tested in combination with cell stimuli such as platelet-activating factor (PAF) or serum, it allowed the expression of increased RITs where none was achieved in its absence. Thioredoxin acted in the assay to reverse a refractory state normally induced by these stimuli, allowing lipoxygenase-dependent moieties also induced by the stimuli to exert their effects, resulting in the expression of increased RITs. Antibodies to recombinant thioredoxin removed from pregnancy sera the capacity to induce increased RITs, i.e. to express EPF activity, thus establishing a role for thioredoxin or thioredoxin-like proteins and associated molecules in the mechanisms which allow pregnancy sera to induce increased RITs. Based on a consideration of these and other results, a new model for the study of the EPF phenomenon is presented and discussed.

Isolation and characterization of human thioredoxin-encoding genes

Thioredoxin (Trx) has recently been demonstrated to be an essential component of the early pregnancy factor activity of pregnancy serum. Here, we report the structure and sequence of human Trx-encoding genes (Trx) by analysis of genomic clones. The Trx gene extends over 13 kb and consists of five exons encoding a 12-kDa protein. A 700-bp fragment upstream from the start codon functions as a promoter when inserted in front of a human growth hormone-encoding reporter gene in tissue-culture cells. This promoter region is very G + C rich and does not contain a classical TATA or CCAAT box, but has three consensus sequences for high-affinity Sp1 binding. Southern analysis demonstrated the presence of several Trx genes in the human genome. The number includes at least one inactive copy as shown by the isolation and sequencing of an inactive pseudogene.

Expression, purification and characterization of secreted recombinant human insulin-like growth factor-I (IGF-I) and the potent variant des(1-3) IGF-I in Chinese hamster ovary cells

Recombinant human insulin-like growth factor-I (hIGF-I) and a biologically potent variant lacking the N-terminal tripeptide (des(1-3)IGF-I) were produced from transfected Chinese hamster ovary cells. The constructs encoding the signal peptide, sequence of the mature peptide and a C-terminal extension peptide were expressed under the control of a Rous sarcoma virus promoter. Successfully transfected clones secreting correctly processed recombinant hIGF-I or des(1-3)IGF-I were selected by their secretion of IGF-I-like activity into the culture medium. The recombinant peptides were purified to homogeneity as assessed by high-performance liquid chromatography and N-terminal sequence analysis. The purified recombinant peptides exhibited biological potencies equivalent to authentic IGF-I and des(1-3)IGF-I respectively.