Assessment of biofilm formation by Campylobacter spp. isolates mimicking poultry slaughterhouse conditions

This research aimed to assess the biofilm formation ability of Campylobacter strains under temperature and oxygen stress conditions, similar to those found in the industrial environment, to explain the persistence of this pathogen on the poultry slaughter line. A collection of C. jejuni and C. coli isolates (n = 143) obtained from poultry samples (cecal content and neck skin), collected at slaughterhouse level, from diverse flocks, on different working days, was genotyped by flaA-restriction fragment length polymorphism (RFLP) typing method. A clustering analysis resulted in the assignment of 10 main clusters, from which 15 strains with different flaA-RFLP genotypes were selected for the assessment of biofilm formation ability and antimicrobial susceptibility. Biofilm assays, performed by crystal violet staining method, were conducted with the goal of mimicking some conditions present at the slaughterhouse environment, based on temperature, atmosphere, and contamination levels. Results indicated that many C. jejuni strains with similar flaA-RFLP profiles were present at the slaughterhouse on different processing days. All the strains tested (n = 15) were multidrug-resistant except for one. Biofilm formation ability was strain-dependent, and it appeared to have been affected by inoculum concentration, temperature, and tolerance to oxygen levels. At 10°C, adherence levels were significantly lower than at 42°C. Under microaerobic and aerobic atmospheres, at 42°C, 3 strains (C. jejuni 46E, C. jejuni 61C, and C. coli 65B) stood out, exhibiting significant levels of biofilm formation. C. jejuni strains 46E and 61C were inserted in clusters with evidence of persistence at the slaughterhouse for a long period of time. This study demonstrated that Campylobacter strains from broilers are capable of forming biofilms under conditions resembling the slaughterhouse environment. These results should be seen as a cue to improve the programs of hygiene implemented, particularly in those zones that can promote biofilm formation.

Potential anti-cancer and anti-Candida activity of Zn-derived foams

Zinc (Zn)-derived foams have been prepared from an alkaline electrolyte solution by galvanostatic electrodeposition under different conditions. A detailed physico-chemical characterization was performed by Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). A pioneer application of these foams in medical implant-related applications was investigated. The in vitro behaviour of these Zn-derived foams in simulated physiological conditions was studied. The results revealed that the presence of zinc oxide was important enough to change the in vitro behaviour of these materials. The potential of these Zn-derived foams in inhibiting bone cancer cell proliferation - osteoscarcoma cells - and important pathogenic fungi responsible for implant-related infections -Candida albicans- was examined. Furthermore, the foams were evaluated for cytocompatibility with normal human osteoblasts. The results obtained allowed us to conclude that Zn-derived foams have an interesting potential for anti-cancer and anti-Candida activity, targeted for bone-related implant applications, suggesting that this novel material may have potential for further clinical studies.

Micropatterned Silica Films with Nanohydroxyapatite for Y-TZP Implants

This investigation aimed at developing micropatterned silica thin films (MSTFs) containing nanohydroxyapatite (nano-HA) microaggregates that were not completely covered by silica so that they could directly interact with the surrounding cells. The objectives were 1) to evaluate the effect of the presence of 2 films (MSTF with or without nano-HA addition) on the characteristic strength (σ₀) and Weibull modulus ( m) of a yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) and 2) to evaluate the effect of these 2 films, as applied onto the Y-TZP surface, on the morphology, orientation, and proliferation of MG63 cells. Sol-gel process and soft lithography were used to apply the MSTF onto the Y-TZP specimens. Three experimental groups were produced: Y-TZP, Y-TZP + MSTF, and Y-TZP + MSTF + sprayed nano-HA. All surfaces were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy and tested for 4-point flexural strength ( n = 30) in water at 37 °C. Weibull analysis was used to determine m and σ₀ (maximum likelihood method). In vitro biological behavior was performed with human osteoblast-like cells (MG63). Y-TZP was successfully coated with MSFT and MSFT + nano-HA. Scanning electron microscopy micrographs indicated that the microaggregates of nano-HA were not entirely covered by the silica. There was no statistically significant difference among the experimental groups for σ₀ and m. In the groups containing the films, the cells were elongated and aligned along the lines. The MSFT + nano-HA group showed significantly higher cell metabolic activity than that obtained for the Y-TZP group at day 7. This investigation was successful in producing an MSTF containing nano-HA microaggregates that remained exposed to the environment. The developed films did not jeopardize the structural reliability of a commercial Y-TZP, as confirmed by the Weibull statistics. The MG63 cells seeded over the films became elongated and aligned along the films' micropatterned lines. Y-TZP specimens coated with MSTF and nano-HA showed a higher cell metabolic activity and proliferation after 7 d of culture when compared with uncoated Y-TZP.

Effect of Sterilization Methods on Electrospun Poly(lactic acid) (PLA) Fiber Alignment for Biomedical Applications

Medically approved sterility methods should be a major concern when developing a polymeric scaffold, mainly when commercialization is envisaged. In the present work, poly(lactic acid) (PLA) fiber membranes were processed by electrospinning with random and aligned fiber alignment and sterilized under UV, ethylene oxide (EO), and γ-radiation, the most common ones for clinical applications. It was observed that UV light and γ-radiation do not influence fiber morphology or alignment, while electrospun samples treated with EO lead to fiber orientation loss and morphology changing from cylindrical fibers to ribbon-like structures, accompanied to an increase of polymer crystallinity up to 28%. UV light and γ-radiation sterilization methods showed to be less harmful to polymer morphology, without significant changes in polymer thermal and mechanical properties, but a slight increase of polymer wettability was detected, especially for the samples treated with UV radiation. In vitro results indicate that both UV and γ-radiation treatments of PLA membranes allow the adhesion and proliferation of MG 63 osteoblastic cells in a close interaction with the fiber meshes and with a growth pattern highly sensitive to the underlying random or aligned fiber orientation. These results are suggestive of the potential of both γ-radiation sterilized PLA membranes for clinical applications in regenerative medicine, especially those where customized membrane morphology and fiber alignment is an important issue.

"Chair Stand Test" as Simple Tool for Sarcopenia Screening in Elderly Women

OBJECTIVES

To investigate the association between sarcopenia and "chair stand test" performance, and evaluate this test as a screening tool for sarcopenia in community-dwelling elderly women.

DESIGN

Cross-sectional Survey.

PARTICIPANTS

173 female individuals, aged ≥ 60 years and living in the urban area of the municipality of Lafaiete Coutinho, Bahia's inland, Brazil.

MEASUREMENTS

The association between sarcopenia (defined by muscle mass, strength and/or performance loss) and performance in the "chair stand test" was tested by binary logistic regression technique. The ROC curve parameters were used to evaluate the diagnostic power of the test in sarcopenia screening. The significance level was set at 5 %.

RESULTS

The model showed that the time spent for the "chair stand test" was positively associated (OR = 1.08; 95% CI = 1.01 - 1.16, p = 0.024) to sarcopenia, indicating that, for each 1 second increment in the test performance, the sarcopenia's probability increased by 8% in elderly women. The cut-off point that showed the best balance between sensitivity and specificity was 13 seconds.

CONCLUSION

The performance of "chair stand test" showed predictive ability for sarcopenia, being an effective and simple screening tool for sarcopenia in elderly women. This test could be used for screening sarcopenic elderly women, allowing early interventions.

Antibacterial activity and biocompatibility of three-dimensional nanostructured porous granules of hydroxyapatite and zinc oxide nanoparticles--an in vitro and in vivo study

Ceramic scaffolds are widely studied in the bone tissue engineering field due to their potential in regenerative medicine. However, adhesion of microorganisms on biomaterials with subsequent formation of antibiotic-resistant biofilms is a critical factor in implant-related infections. Therefore, new strategies are needed to address this problem. In the present study, three-dimensional and interconnected porous granules of nanostructured hydroxyapatite (nanoHA) incorporated with different amounts of zinc oxide (ZnO) nanoparticles were produced using a simple polymer sponge replication method. As in vitro experiments, granules were exposed to Staphylococcus aureus and Staphylococcus epidermidis and, after 24 h, the planktonic and sessile populations were assessed. Cytocompatibility towards osteoblast-like cells (MG63 cell line) was also evaluated for a period of 1 and 3 days, through resazurin assay and imaging flow cytometry analysis. As in vivo experiments, nanoHA porous granules with and without ZnO nanoparticles were implanted into the subcutaneous tissue in rats and their inflammatory response after 3, 7 and 30 days was examined, as well as their antibacterial activity after 1 and 3 days of S. aureus inoculation. The developed composites proved to be especially effective at reducing bacterial activity in vitro and in vivo for a weight percentage of 2% ZnO, with a low cell growth inhibition in vitro and no differences in the connective tissue growth and inflammatory response in vivo. Altogether, these results suggest that nanoHA-ZnO porous granules have a great potential to be used in orthopaedic and dental applications as a template for bone regeneration and, simultaneously, to restrain biomaterial-associated infections.

Three-dimensional printed PCL-hydroxyapatite scaffolds filled with CNTs for bone cell growth stimulation

A three-phase [nanocrystalline hydroxyapatite (HA), carbon nanotubes (CNT), mixed in a polymeric matrix of polycaprolactone (PCL)] composite scaffold produced by 3D printing is presented. The CNT content varied between 0 and 10 wt % in a 50 wt % PCL matrix, with HA being the balance. With the combination of three well-known materials, these scaffolds aimed at bringing together the properties of all into a unique material to be used in tissue engineering as support for cell growth. The 3D printing technique allows producing composite scaffolds having an interconnected network of square pores in the range of 450-700 μm. The 2 wt % CNT scaffold offers the best combination of mechanical behaviour and electrical conductivity. Its compressive strength of ∼4 MPa is compatible with the trabecular bone. The composites show typical hydroxyapatite bioactivity, good cell adhesion and spreading at the scaffolds surface, this combination of properties indicating that the produced 3D, three-phase, scaffolds are promising materials in the field of bone regenerative medicine. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1210-1219, 2016.

Diels-Alder functionalized carbon nanotubes for bone tissue engineering: in vitro/in vivo biocompatibility and biodegradability

The risk-benefit balance for carbon nanotubes (CNTs) dictates their clinical fate. To take a step forward at this crossroad it is compulsory to modulate the CNT in vivo biocompatibility and biodegradability via e.g. chemical functionalization. CNT membranes were functionalised combining a Diels-Alder cycloaddition reaction to generate cyclohexene (-C6H10) followed by a mild oxidisation to yield carboxylic acid groups (-COOH). In vitro proliferation and osteogenic differentiation of human osteoblastic cells were maximized on functionalized CNT membranes (p,f-CNTs). The in vivo subcutaneously implanted materials showed a higher biological reactivity, thus inducing a slighter intense inflammatory response compared to non-functionalized CNT membranes (p-CNTs), but still showing a reduced cytotoxicity profile. Moreover, the in vivo biodegradation of CNTs was superior for p,f-CNT membranes, likely mediated by the oxidation-induced myeloperoxidase (MPO) in neutrophil and macrophage inflammatory milieus. This proves the biodegradability faculty of functionalized CNTs, which potentially avoids long-term tissue accumulation and triggering of acute toxicity. On the whole, the proposed Diels-Alder functionalization accounts for the improved CNT biological response in terms of the biocompatibility and biodegradability profiles. Therefore, CNTs can be considered for use in bone tissue engineering without notable toxicological threats.

First insight on the impact of an osteoblastic layer on the bio-tribocorrosion performance of Ti6Al4V hip implants

In uncemented Ti6Al4V hip implants, the bone-stem interface is subjected to cyclic loading motion driven by the daily activities of the patients, which may lead to the complete failure of the implant in the long term. It may also compromise the proliferation and differentiation processes of osteoblastic cells (bone-forming cells). The main objective of this work is to approach for the first time the role of these organic materials on the bio-tribocorrosion mechanisms of cultured Ti6Al4V alloys. The colonized materials with MG63 osteoblastic-like cells were characterized through cell viability/proliferation and enzymatic activity. Tribocorrosion tests were performed under a reciprocating sliding configuration and low contact pressure. Electrochemical techniques were used to measure the corrosion kinetics of the system, under free potential conditions. All tests were performed at a controlled atmosphere. The morphology and topography of the wear scar were evaluated. The results showed that the presence of an osteoblastic cell layer on the implant surface significantly influences the tribocorrosion behavior of Ti6Al4V alloy. It was concluded that the cellular material was able to form an extra protective layer that inhibits further wear degradation of the alloy and decreases its corrosion tendency.

The biomaterial-mediated healing of critical size bone defects in the ovariectomized rat

This study demonstrated an impaired biomaterial-mediated bone regeneration in a critical sized calvarial defect established within an ovariectomized rat model. Histological and microtomographic evidences were supported by an impaired osteoblastic gene expression and altered expression of estrogen receptors and adipogenic markers.

INTRODUCTION

This work aims to address the bone regeneration process in the ovariectomized rat model, by assessing a calvarial critical size defect implanted with a biocompatible bovine bone mineral graft.

METHODS

Animals were randomly divided into two groups: Ovx (bilateral ovariectomy) and Sham (control surgery). Following 8 weeks, all animals were submitted to a surgical bicortical craniotomy (5-mm circular critical size defect), which was filled with a biocompatible mineral graft. Animals were euthanized at 1, 3, and 6 months following graft implantation (n = 10), and results on the orthotopic bone regeneration process were blindly evaluated by radiographic, microtomographic, histological, histomorphometric, and gene expression techniques.

RESULTS

In the attained model, in both Sham and Ovx groups, the bone regenerative process was found to occur in a slow-paced manner. Likewise, a qualitative evaluation of the microtomographic and histological analysis, as well as quantitative data from histomorphometric indexes, revealed reduced bone regeneration in Ovx animals, at the assayed time points. Significant differences were attained at the 3 and 6 months. Gene expression analysis revealed a reduced expression of osteoblastic-related genes and an altered expression of estrogen receptors and adipogenic markers, within the regenerating bone of Ovx animals.

CONCLUSIONS

Due to the similarities between the osteoporotic animal model and the human condition of postmenopausal osteoporosis, it might be relevant to consider the potential clinical implication of the osteoporotic condition in the biomaterial-mediated bone tissue healing/regeneration process.

Multifunctional carbon nanotube/bioceramics modulate the directional growth and activity of osteoblastic cells

Biomaterials can still be reinvented to become simple and universal bone regeneration solutions. Following this roadmap, a bone graft of carbon nanotube (CNT)/glass/hydroxyapatite (HA) with controlled CNT agglomeration state was designed with multifunctionalities able to stimulate the bone cell phenotype. The preparation route, the mechanical and electrical behavior and the in vitro profiles of degradation and osteocompatibility were described. A non-destructive dynamic route was found to have a higher influence than the Diels-Alder functionalization one on controlling the CNT agglomerate state in the ceramic-matrix composite. Biologically safe CNT agglomerates, with diameter sizes below 3 microm homogenously distributed, were obtained in non-functionalized and functionalized composites. Yet, the lowest CNT damage and the highest mechanical and electrical properties were found for the non-functionalized materials. Even though that these composites present higher degradation rate at pH:3 than the ceramic matrix, the CNT agglomerates are released with safe diameter sizes. Also, non-functionalized composites allowed cellular adhesion and modulated the orientation of the cell growth, with a proliferation/differentiation relationship favoring osteoblastic functional activity. Findings offer further contributions for bone tissue engineering by showing that multifunctional bone grafts with high electroconductivity, and integrating CNT agglomerates with maximized interfacing area, allow the in situ control of bone cell functions.

Processing strategies for smart electroconductive carbon nanotube-based bioceramic bone grafts

Electroconductive bone grafts have been designed to control bone regeneration. Contrary to polymeric matrices, the translation of the carbon nanotube (CNT) electroconductivity into oxide ceramics is challenging due to the CNT oxidation during sintering. Sintering strategies involving reactive-bed pressureless sintering (RB + P) and hot-pressing (HP) were optimized towards prevention of CNT oxidation in glass/hydroxyapatite (HA) matrices. Both showed CNT retentions up to 80%, even at 1300 °C, yielding an increase of the electroconductivity in ten orders of magnitude relative to the matrix. The RB + P CNT compacts showed higher electroconductivity by ∼170% than the HP ones due to the lower damage to CNTs of the former route. Even so, highly reproducible conductivities with statistical variation below 5% and dense compacts up to 96% were only obtained by HP. The hot-pressed CNT compacts possessed no acute toxicity in a human osteoblastic cell line. A normal cellular adhesion and a marked orientation of the cell growth were observed over the CNT composites, with a proliferation/differentiation relationship favouring osteoblastic functional activity. These sintering strategies offer new insights into the sintering of electroconductive CNT containing bioactive ceramics with unlimited geometries for electrotherapy of the bone tissue.

Corrosion resistance of a composite polymeric coating applied on biodegradable AZ31 magnesium alloy

The high corrosion rate of magnesium alloys is the main drawback to their widespread use, especially in biomedical applications. There is a need for developing new coatings that provide simultaneously corrosion resistance and enhanced biocompatibility. In this work, a composite coating containing polyether imide, with several diethylene triamine and hydroxyapatite contents, was applied on AZ31 magnesium alloys pre-treated with hydrofluoric acid by dip coating. The coated samples were immersed in Hank's solution and the coating performance was studied by electrochemical impedance spectroscopy and scanning electron microscopy. In addition, the behavior of MG63 osteoblastic cells on coated samples was investigated. The results confirmed that the new coatings not only slow down the corrosion rate of AZ31 magnesium alloys in Hank's solution, but also enhance the adhesion and proliferation of MG63 osteoblastic cells, especially when hydroxyapatite nanoparticles were introduced in the coating formulation.

Acrylic formulations containing bioactive and biodegradable fillers to be used as bone cements: properties and biocompatibility assessment

The solid phase of bioactive self-curing acrylic cements was modified by different biodegradable fillers such as poly(3-hydroxybutyrate) (PHB) and its copolymer with hydroxyvalerate (PHBV). The addition of the biodegradable fillers made the cement partially degradable, which is important to allow new bone replacement and ingrowth. The thermal analysis, crystallinity, curing parameters, mechanical properties, degradation and cellular tests were studied in order to characterize the cement performance. Within this context it was verified that the incorporation of the PHBV polymer made the cement more resistant, reaching values within the range reported for typical PMMA bone cements. The results also showed that the cement filled with PHBV took up more water than the cement with PHB after 60 days, for all studied formulations. Regarding the osteoblastic cytocompatibility assessment, the inclusion of the PHBV greatly improved the biological response in both cements filled with the silicate or the borate glass, compared to the inclusion of the PHB. The importance of this novel approach resides on the combination of the properties of the cements components and the possibility of allowing bone regeneration, improving the interfaces with both the prosthesis and the bone, and leading to a new material with suitable performance for application as bone cement.

Properties and osteoblast cytocompatibility of self-curing acrylic cements modified by glass fillers

Materials filled with a silicate glass (MSi) and a borate glass (MB) were developed and compared in terms of their in vitro behavior. The effect of filler composition and concentration (0, 30, 40 and 50 wt%) on the curing parameters, residual monomer, water uptake, weight loss, bioactivity, mechanical properties (bending and compression) and osteoblast cytocompatibility was evaluated. The addition of bioactive glass filler significantly improved the cements curing parameters and the mechanical properties. The most relevant results were obtained for the lower filler concentration (30 t%) a maximum flexural strength of 40.4 Pa for MB3 and a maximum compressive strength of 95.7 MPa for MSi3. In vitro bioactivity in acellular media was enhanced by the higher glass contents in the cements. Regarding the biological assessment, the incorporation of the silicate glass significantly improved osteoblast cytocompatibility, whereas the presence of the borate glass resulted in a poor cell response. Nevertheless it was shown that the surviving cells on the MB surface were in a more differentiated stage compared to those growing over non-filled poly(methyl methacrylate). Results suggest that the developed formulations offer a high range of properties that might be interesting for their use as self-curing cements.

Relevance of the sterilization-induced effects on the properties of different hydroxyapatite nanoparticles and assessment of the osteoblastic cell response

Hydroxyapatite (Hap) is a calcium phosphate with a chemical formula that closely resembles that of the mineral constituents found in hard tissues, thereby explaining its natural biocompatibility and wide biomedical use. Nanostructured Hap materials appear to present a good performance in bone tissue applications because of their ability to mimic the dimensions of bone components. However, bone cell response to individual nanoparticles and/or nanoparticle aggregates lost from these materials is largely unknown and shows great variability. This work addresses the preparation and characterization of two different Hap nanoparticles and their interaction with osteoblastic cells. Hap particles were produced by a wet chemical synthesis (WCS) at 37°C and by hydrothermal synthesis (HS) at 180°C. As the ultimate in vivo applications require a sterilization step, the synthesized particles were characterized 'as prepared' and after sterilization (autoclaving, 120°C, 20 min). WCS and HS particles differ in their morphological (size and shape) and physicochemical properties. The sterilization modified markedly the shape, size and aggregation state of WCS nanoparticles. Both particles were readily internalized by osteoblastic cells by endocytosis, and showed a low intracellular dissolution rate. Concentrations of WCS and HS particles less than 500 μg ml(-1) did not affect cell proliferation, F-actin cytoskeleton organization and apoptosis rate and increased the gene expression of alkaline phosphatase and BMP-2. The two particles presented some differences in the elicited cell response. In conclusion, WCS and HS particles might exhibit an interesting profile for bone tissue applications. Results suggest the relevance of a proper particle characterization, and the interest of an individual nanoparticle targeted research.

Induced osteoclastogenesis by fluoroquinolones in unstimulated and stimulated human osteoclast precursor cells

Fluoroquinolones (FQs) are a class of antibiotics with a broad spectrum of activity, known to disturb bone metabolism. The aim of this work was to characterize the cellular and molecular effects of five FQs (ofloxacin, norfloxacin, ciprofloxacin, levofloxacin and moxifloxacin) in unstimulated and stimulated human osteoclast precursors. Peripheral blood mononuclear cells (PBMC) were cultured in the absence (unstimulated) or in the presence of osteoclastogenic factors (M-CSF and RANKL, stimulated), and were treated with FQs (0.3×10(-9)-10(-3) M), for 21 days. In unstimulated PBMC cultures, FQs (excepting moxifloxacin) exhibited a high osteoclastogenic potential, as shown by a significant increase in the expression of osteoclastic genes, TRAP activity and, specially, number of TRAP-positive multinucleated cells and calcium phosphate resorbing ability, suggesting the presence of mature and functional osteoclasts. Norfloxacin and levofloxacin induced the higher effect, followed by ciprofloxacin and ofloxacin. A decrease on apoptosis and an increase on M-CSF expression might have a possible contribution in the observed cellular behavior. In stimulated PBMC cultures, FQs further increase the osteoclastogenic response induced by M-CSF and RANKL (except ofloxacin). However, the osteoclastogenic response was much lower than that observed in unstimulated PBMC cultures. Both in unstimulated and stimulated PBMC cultures, for most of the FQs, the osteoclastogenic effects were observed in a wide range of concentrations, representative of plasmatic and tissue levels attained in several clinical settings. The various FQs differed on the stimulatory concentration range, the extent of the induced osteoclastogenic response and, also, on the dose- and time-dependent profile. Nevertheless, at high concentrations all the FQs seemed to elicit an increase on apoptosis. Additionally, some differences were noted in the intracellular signaling pathways tested, namely NFkB, MEK and PGE2 production. Results suggest that, considering the inter-individual variability of the FQs pharmacokinetics, the detailed biological profile of each FQ on bone cells is of utmost importance to clarify the effects of these compounds on bone metabolism.

Equisetum arvense hydromethanolic extracts in bone tissue regeneration: in vitro osteoblastic modulation and antibacterial activity

OBJECTIVES

Equisetum arvense preparations have long been used to promote bone healing. The aim of this work was to evaluate osteogenic and antibacterial effects of E. arvense hydromethanolic extracts.

MATERIALS AND METHODS

Dried aerial components of E. arvense were extracted using a mixture of methanol:water (1:1), for 26 days, yielding three extracts that were tested (10-1000 μg/ml) in human osteoblastic cells: E1, E2 and EM (a mixture of E1 and E2, 1:1). Cell cultures, performed on cell culture plates or over hydroxyapatite (HA) substrates, were assessed for osteoblastic markers. In addition, effects of the extracts on Staphylococcus aureus were addressed.

RESULTS

Solution E1 caused increased viability/proliferation and ALP activity at 50-500 μg/ml, and deleterious effects at levels ≥1000 μg/ml. E2 inhibited cell proliferation at levels ≥500 μg/ml. EM presented a profile between those observed with E1 and E2. In addition, E1, E2 and EM, 10-1000 μg/ml, inhibited expansion of S. aureus. Furthermore, E1, tested in HA substrates colonized with osteoblastic cells, causing increase in cell population growth (10-100 μg/ml). E1 also exhibited antibacterial activity against S. aureus cultured over HA.

CONCLUSIONS

Results showed that E. arvense extracts elicited inductive effects on human osteoblasts while inhibiting activity of S. aureus, suggesting a potentially interesting profile regarding bone regeneration strategies.

Reciprocal induction of human dermal microvascular endothelial cells and human mesenchymal stem cells: time-dependent profile in a co-culture system

OBJECTIVES

Angiogenesis is closely associated with osteogenesis where reciprocal interactions between endothelial and osteoblast cells play an important role in bone regeneration. For these reasons, the aim of this work was to develop a co-culture system to study in detail any time-dependent interactions between human mesenchymal stem cells (HMSC) and human dermal microvascular endothelial cells (HDMEC), co-cultured in a 2D system, for 35 days.

MATERIALS AND METHODS

HMSC and HDMEC were co-cultured at a ratio of 1:4, respectively. Single-cell cultures were used as controls. Cell viability/proliferation was assessed using MTT, DNA quantification and calcein-AM assays. Cell morphology was monitored using confocal microscopy, and real time PCR was performed. Alkaline phosphatase activity and histochemical staining were evaluated. Matrix mineralization assays were also performed.

RESULTS

Cells were able to grow in characteristic patterns maintaining their viability and phenotype expression throughout culture time, compared to HMSC and HDMEC monocultures. HMSC differentiation seemed to be enhanced in the co-culture conditions, since it was observed an over expression of osteogenesis-related genes, and of ALP activity. Furthermore, presence of calcium phosphate deposits was also confirmed.

CONCLUSIONS

This work reports in detail the interactions between HMSC and HDMEC in a long-term co-culture 2D system. Endothelial and mesenchymal stem cells cultured in the present co-culture conditions ensured proliferation and phenotype differentiation of cell types, osteogenesis stimulation and over-expression of angiogenesis-related genes, in the same culture system. It is believed that the present work can lead to significant developments for bone tissue regeneration and cell biology studies.

Spontaneous and induced osteoclastogenic behaviour of human peripheral blood mononuclear cells and their CD14(+) and CD14(-) cell fractions

OBJECTIVES

Osteoclasts are descended from the CD14(+) monocyte/macrophage lineage, but influence of other haematopoietic cells on osteoclastic commitment of their precursors has remained poorly understood. In this study, osteoclastogenic behaviour of peripheral blood mononuclear cells (PBMC) and their CD14(+) and CD14(-) subpopulations has been accessed, in the absence or presence of M-CSF and RANKL.

MATERIALS AND METHODS

Cell cultures were characterized for presence of actin rings and vitronectin and calcitonin receptors, TRAP activity and calcium phosphate resorbing activity, expression of osteoclast-related genes and secretion of M-CSF and RANKL.

RESULTS

In the absence of growth factors, PBMC and CD14(+) cultures had some degree of cell survival, and some spontaneous osteoclastogenesis was observed, only on cultures of the former. Supplementation with M-CSF and RANKL significantly increased osteoclastogenic behaviour of cell cultures, particularly CD14(+) cell cultures. Nevertheless, PBMC derived a higher degree of osteoclastogenesis, either as absolute values or after normalization by protein content. It was observed that unlike CD14(+) cells, PBMC were able to express M-CSF and RANKL, which increased following growth factor treatment. Also, expression of TNF-α, GM-CSF, IL-1β, IL-6 and IL-17 was higher in PBMC cultures. Finally, CD14(-) cultures exhibited limited cell survival and did not reveal any osteoclast features.

CONCLUSIONS

Results show that although osteoclastic precursors reside in the CD14(+) cell subpopulation, other populations (such as CD14(-) cells) derived from PBMC, have the ability to modulate osteoclastogenesis positively.

Paracrine-mediated differentiation and activation of human haematopoietic osteoclast precursor cells by skin and gingival fibroblasts

OBJECTIVE

Fibroblasts appear to modulate osteoclastogenesis, but their precise role in this process remains unclear. In this work, paracrine-mediated osteoclastogenic potential of different human fibroblasts was assessed.

MATERIALS AND METHODS

Fibroblast-conditioned media (CM) from foetal skin (CM1), adult skin (CM2) and adult gingiva (CM3) were used to promote osteoclastogenesis of osteoclast precursor cells. Cultures supplemented with macrophage-colony stimulating factor (M-CSF) and receptor activator of nuclear factor-κB ligand (RANKL) were used as controls.

RESULTS

All fibroblast cultures expressed FSP-1, M-CSF and RANKL and produced osteoprotegerin (OPG); gingival fibroblasts presented lowest expression of osteoclastogenic genes and higher production of OPG. All fibroblast CM were able to induce osteoclastogenesis. CM1 showed behaviour similar to positive controls, and slightly higher osteoclastogenic potential than CM, from adult ones. Gingival fibroblasts revealed lowest osteoclastogenic ability. Presence of anti-MCSF or anti-RANKL partially inhibited osteoclastogenesis promoted by CM, although the former antibody revealed higher inhibitory response. Differences among the osteoclastogenic effect of CM were noted, mainly in expression of genes involved in differentiation and activation of osteoclast precursor cells, c-myc and c-src, and less regarding functional related parameters.

CONCLUSIONS

Fibroblasts are able to induce osteoclastogenesis by paracrine mechanisms, and age and anatomical location affect this ability. Other factors produced by fibroblasts, in addition to M-CSF and RANKL, appear to contribute to observed osteoclastogenic potential.

Characterization and preliminary in vivo evaluation of a novel modified hydroxyapatite produced by extrusion and spheronization techniques

A glass-reinforced hydroxyapatite (HA) composite, recently registered as Bonelike®, was developed for bone grafting. This biomaterial is composed of a modified HA matrix with α- and β-tricalcium phosphate secondary phases and ionic species that mimic the chemical composition of human bone. Several in vitro and in vivo studies have confirmed the benefits of these properties. However, these studies were all executed with Bonelike® polygonal granules obtained by crushing. In this study, Bonelike® pellets were produced through a patented process, which required the use of techniques such as extrusion and spheronization. The final product presented a homogeneous size, a 55.1% global porosity and a spherical shape. This spherical shape permitted a better adaptation to the implantation site and improved injectability. Additionally, it also may contribute to formation of macropores as pellets packaging leaves open spaces. After implantation of Bonelike® polygonal granules and Bonelike® pellets in monocortical defects in sheep for 8 and 12 weeks, light microscopy and scanning electron microscopy showed extensive osteointegration simultaneously with bone regeneration for both presentations. Histomorphometric analysis did not reveal statistically significant differences between defects treated with Bonelike® polygonal granules and Bonelike® pellets, which suggests similar in vivo performances.

Silicate and borate glasses as composite fillers: a bioactivity and biocompatibility study

Composites filled with a silicate glass (CSi) and a new borate glass (CB) were developed and compared in terms of their in vitro behaviour both in acellular and cellular media. Acellular tests were carried out in SBF and the composites were characterized by SEM-EDS, XRD and ICP. Biocompatibility studies were investigated by in vitro cell culture with MG-63 osteoblast-like and human bone marrow cells. The growth of spherical calcium phosphate aggregates was observed in acellular medium on all composite surfaces indicating that these materials became potentially bioactive. The biological assessment resulted in a dissimilar behavior of the composites. The CSi demonstrated an inductive effect on the proliferation of cells. The cells showed a normal morphology and high growth rate when compared to standard culture plates. Contrarily, inhibition of cell proliferation occurred in the CB probably due to its high degradation rate, leading to high B and Mg ionic concentration in the cell culture medium.

Isotropic micropatterned silica coatings on zirconia induce guided cell growth for dental implants

Titanium implants are the gold standard in dentistry; however, problems such as gingival tarnishing and peri-implantitis have been reported. For zirconia to become a competitive alternative dental implant material, surface modification techniques that induce guided tissue growth must be developed.

OBJECTIVES

To develop alternative surface modification techniques to promote guided tissue regeneration on zirconia materials, for applications in dental implantology.

METHODS

A methodology that combined soft lithography and sol-gel chemistry was used to obtain isotropic micropatterned silica coatings on yttria-stabilized zirconia substrates. The materials were characterized via chemical, structural, surface morphology approaches. In vitro biological behavior was evaluated in terms of early adhesion and viability/metabolic activity of human osteoblast-like cells. Statistical analysis was conducted using one-way ANOVA/Tukey HSD post hoc test.

RESULTS

Isotropic micropatterned silica coatings on yttria-stabilized zirconia substrates were obtained using a combined approach based on sol-gel technology and soft lithography. Micropatterned silica surfaces exhibited a biocompatible behavior, and modulated cell responses (i.e. inducing early alignment of osteoblast-like cells). After 7d of culture, the cells fully covered the top surfaces of pillar microstructured silica films.

SIGNIFICANCE

The micropatterned silica films on zirconia showed a biocompatible response, and were capable of inducing guided osteoblastic cell adhesion, spreading and propagation. The results herein presented suggest that surface-modified ceramic implants via soft lithography and sol-gel chemistry could potentially be used to guide periodontal tissue regeneration, thus promoting tight tissue apposition, and avoiding gingival retraction and peri-implantitis.

Cytotoxicity in L929 fibroblasts and inhibition of herpes simplex virus type 1 Kupka by estuarine cyanobacteria extracts

The cyanobacteria are known to be a rich source of metabolites with a variety of biological activities in different biological systems. In the present work, the bioactivity of aqueous and organic (methanolic and hexane) crude extracts of cyanobacteria isolated from estuarine ecosystems was studied using different bioassays. The assessment of DNA damage on the SOS gene repair region of mutant PQ37 strain of Escherichia coli was performed. Antiviral activity was evaluated against influenza virus, HRV-2, CVB3 and HSV-1 viruses using crystal violet dye uptake on HeLa, MDCK and GMK cell lines. Cytotoxicity evaluation was performed with L929 fibroblasts by MTT assay. Of a total of 18 cyanobacterial isolates studied, only the crude methanolic extract of LEGE 06078 proved to be genotoxic (IF > 1.5) in a dose-dependent manner and other four were putative candidates to induce DNA damage. Furthermore, the crude aqueous extract of LEGE 07085 showed anti- herpes type 1 activity (IC50 = 174.10 μg dry extract mL(-1)) while not presenting any cytotoxic activity against GMK cell lines. Of the 54 cyanobacterial extracts tested, only the crude methanolic and hexane ones showed impair on metabolic activity of L929 fibroblasts after long exposure (48-72 h). The inhibition of HSV-1 and the strong cytotoxicity against L929 cells observed emphasizes the importance of evaluating the impact of those estuarine cyanobacteria on aquatic ecosystem and on human health. The data also point out their potential application in HSV-1 treatment and pharmacological interest.

Innovative macroporous granules of nanostructured-hydroxyapatite agglomerates: bioactivity and osteoblast-like cell behaviour

To modulate the biological response of implantable granules, two types of bioactive porous granules composed of nanostructured-hydroxyapatite (HA) agglomerates and microstructured-HA, respectively, were prepared using a polyurethane sponge impregnation and burnout method. The resulting granules presented a highly porous structure with interconnected porosity. Both types of granules were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and mercury intrusion porosimetry. Results showed that nanostructed-HA granules presented higher surface area and porosity than microstructured-HA granules. In vitro testing using MG63 human osteoblast-like cells showed that on both types of surfaces cells were able to adhere, proliferate, and migrate through the macropores, and a higher growth rate was achieved on nanostructured-HA granules than on microstructured-HA granules (76 and 40%, respectively). In addition, these cells maintained similar expression levels of osteoblastic-associated markers namely collagen type I, alkaline phosphatase, bone morphogenetic protein-2, macrophage colony-stimulating factor, and osteoprotegerin. These innovative nanostructured-HA granules may be considered as promising bioceramic alternative matrixes for bone regeneration and drug release application.

Rodent models in bone-related research: the relevance of calvarial defects in the assessment of bone regeneration strategies

In vivo research with animal models has been a preferred experimental system in bone-related biomedical research since, by approximation, it allows relevant data gathering regarding physiological and pathological conditions that could be of use to establish more effective clinical interventions. Animal models, and more specifically rodent models, have been extensively used and have contributed greatly to the development and establishment of a wide range of translational approaches aiming to regenerate the bone tissue. In this regard, the calvarial defect model has found great application in basic and applied research, nonetheless the controversial rationalization for the use of critical size defects - defects that are unable to report spontaneous healing - or subcritical size defects in the proposed applications. Accordingly, this work aims to review the advantages and limitations of the use of rodent models in biomedical bone-related research, emphasizing the problematic issues of the use of calvarial critical and subcritical size defects. Additionally, surgical protocols for the establishment of both defects in rat calvarial bone, as well as the description and exemplification of the most frequently used techniques to access the bone tissue repair, are portrayed.

Early spreading and propagation of human bone marrow stem cells on isotropic and anisotropic topographies of silica thin films produced via microstamping

While there has been rapid development of microfabrication techniques to produce high-resolution surface modifications on a variety of materials in the last decade, there is still a strong need to produce novel alternatives to induce guided tissue regeneration on dental implants. High-resolution microscopy provides qualitative and quantitative techniques to study cellular guidance in the first stages of cell-material interactions. The purposes of this work were (1) to produce and characterize the surface topography of isotropic and anisotropic microfabricated silica thin films obtained by sol-gel processing, and (2) to compare the in vitro biological behavior of human bone marrow stem cells on these surfaces at early stages of adhesion and propagation. The results confirmed that a microstamping technique can be used to produce isotropic and anisotropic micropatterned silica coatings. Atomic force microscopy analysis was an adequate methodology to study in the same specimen the sintering derived contraction of the microfabricated coatings, using images obtained before and after thermal cycle. Hard micropatterned coatings induced a modulation in the early and late adhesion stages of cell-material and cell-cell interactions in a geometry-dependent manner (i.e., isotropic versus anisotropic), as it was clearly determined, using scanning electron and fluorescence microscopies.

Growth and phenotypic expression of human endothelial cells cultured on a glass-reinforced hydroxyapatite

Glass-reinforced hydroxyapatite composites (GR-HA) are bone regenerative materials that are characterized by their increased mechanical properties, when compared to synthetic hydroxyapatite. Bonelike is a GR-HA that is a result of the addition of a CaO-P(2)O(5) based glass to a HA matrix. This biomaterial has been successfully applied in clinical bone regenerative applications. This work aims to evaluate the ability of Bonelike to support the adhesion, proliferation and phenotypic expression of human endothelial cells, aiming to establish new bone tissue engineering pre-endothelialization strategies. Bonelike discs, regardless of being submitted to a pre-immersion treatment with culture medium, were seeded with first passage human umbilical vein endothelial cells, and characterized regarding proliferation and differentiation events. Pre-immersed Bonelike allowed the adhesion, proliferation and phenotype expression of endothelial cells. Seeded materials presented positive immunofluorescent staining for PECAM-1 and a tendency for the formation of cord-like arrangements under angiogenesis-stimulating conditions, although, compared to standard culture plates, a slight decreased cell growth was observed. In this way, Bonelike may be a suitable candidate for pre-endothelialization approaches in bone tissue engineering applications.

Effect of nicotine in matrix mineralization by human bone marrow and Saos-2 cells cultured on the surface of plasma-sprayed titanium implants

Smoking has an established negative impact in the clinical outcome of dental implants. This work analyses the response of human osteoblastic cells to nicotine, at the surface of plasma-sprayed commercial titanium implants. Human bone marrow (HBM) and Saos-2 cells, seeded on the surface of titanium implants and cultured in experimental conditions favoring osteoblastic differentiation, were exposed continuously to nicotine (0.0001 to 0.5 mg mL(-1)) and characterized for cell proliferation and function. Exposure of HBM cells resulted in increased cell proliferation, higher alkaline phosphatase (ALP) activity, and earlier onset of matrix mineralization at levels up to 0.2 mg mL(-1), an initial inhibitory effect in cell growth and functional activity followed by a recovery in the presence of 0.3 mg mL(-1) and a dose-dependent deleterious effect at higher levels. By contrast, exposure to nicotine did not affect cell proliferation of Saos-2 cells at levels up to 0.2 mg mL(-1), and caused only a small positive effect in ALP activity in the presence of 0.05 and 0.1 mg mL(-1); however, matrix mineralization by Saos-2 cells also occurred earlier in the cultures exposed to levels of nicotine up to 0.1 mg mL(-1). Higher concentrations caused dose-dependent inhibitory effects. Considering the high diffusion potential of nicotine, results suggest a local role of nicotine in modulating bone formation events at the implant surface.

Cytotoxicity evaluation of nanocrystalline diamond coatings by fibroblast cell cultures

The cytotoxicity profile of nanocrystalline diamond (NCD) coatings on a Si(3)N(4) ceramic was investigated. This material is envisaged to have biomedical dental applications such as burrs and surgical instruments. Two fibroblast cell culture systems were used to address the cytotoxicity of NCD-coated samples: L929 cells (a mouse permanent cell line) and human gingival fibroblasts. Cell behavior was evaluated in terms of cell adhesion, cell viability/proliferation (mitochondrial function, MTT assay) and the pattern of cell growth. Fibroblast cell behavior on standard polystyrene culture plates was used as control, as Si(3)N(4) substrates have previously been shown to be biocompatible. NCD coatings provided a suitable surface for cell attachment, spreading and proliferation. Human gingival cells showed a homogeneous cytoplasm spreading, a flattened elongated morphology and a typical parallel alignment on confluent cultures. In comparison, L929 cells denoted a lower cytoplasm expansion, a heterogeneous spreading but a higher proliferation rate. For both cells, after few days, the NCD coating was completely covered with continuous cell layers. As compared to standard polystyrene culture plates, no deleterious or cytotoxic responses were observed with L929 and human fibroblast cell cultures, and in both a slight enhancement in cell proliferation was observed. In addition, the seeded NCD film allowed reproduction of the typical features of the two cell culture systems tested, further suggesting the lack of cytotoxicity of this coating.

In vitro studies of calcium phosphate glass ceramics with different solubility with the use of human bone marrow cells

Two glass ceramics in the CaO--P2O5--MgO system with the incorporation of K2O or TiO2 oxides were prepared with the goal of using them as potential bone graft substitutes. The incorporation of TiO2 and K2O led to the preparation of specific crystalline phases in the structure of the glass ceramics, which show different degrees of biodegradation. In fact, the 45CaO--45P2O5--5MgO--5K2O has been previously demonstrated to be much more soluble in aqueous solutions than the 45CaO--37P2O5--5MgO--13TiO2 glass ceramic. The in vitro biological activity of the two calcium phosphate glass ceramics was studied with the use of human bone marrow osteoblast cell cultures maintained for 28 days, and seeded materials were assessed for cell proliferation and function. The Ti-containing glass ceramic showed a stable surface throughout the culture time, on macroscopic and SEM observation. Osteoblast cells proliferated gradually, especially during the third week, with a high alkaline phosphatase activity and formation of a mineralized matrix. On SEM observation, attached cells appeared with a spread-polygonal morphology typical of the osteoblast cells, with extensive cell-to-cell contact. Cell behavior on the seeded material was similar to that found on cultures performed on tissue-culture-grade polystyrene; except for the presence of lower cell numbers during the first 2 weeks. By contrast, the K-containing glass ceramic showed a highly instable surface with dissolution/precipitation processes occurring throughout the culture time. Few cells adhered to the material surface, and subsequent proliferation was also hindered, especially from the first week onwards. Cell numbers were significantly lower than those observed in the Ti-containing glass ceramic during most of the incubation time. Results suggest that the different in vitro biological behavior of these two glass ceramics is mainly due to the significant differences in the surface degradation rate, which is directly correlated to the chemical composition of the mother glass.

Si(3)N(4)-bioglass composites stimulate the proliferation of MG63 osteoblast-like cells and support the osteogenic differentiation of human bone marrow cells

The in vitro osteocompatibility of a novel Si(3)N(4)-bioglass composite (70-30% weight proportion) with improved mechanical properties (fracture toughness = 4.4 M Pa m(1/2); bending strength = 383 +/- 47 MPa) is reported. Immersion of the composite samples in culture medium (30 min to 7 days) resulted in rapid protein adsorption to the surface and, also, dissolution of the intergranular phase of bioglass (time-dependent process) with the formation of different size cavities. "As-received" and pre-treated material samples presented a similar behaviour concerning the proliferation of MG63 osteoblast-like cells, evaluated during a 5-day culture period. Seeded materials showed a higher cell growth rate as compared to cultures performed on the standard plastic culture plates. To assess the osteogenic potential of the composite, "as-received" material samples were seeded with human bone marrow cells and cultured for 35 days in experimental conditions that favour the development of the osteoblastic phenotype. The cell adhesion process was similar to that observed in control cultures. Cells successfully adapted to the irregularities of the surface and were able to grow towards inside the cavities; in addition, osteogenic differentiation occurred with the formation of abundant cell-mediated mineralised deposits. Results suggest that this Si(3)N(4)-bioglass composite seems to be a promising candidate for high-stress medical applications.

Surface topography modulates the osteogenesis in human bone marrow cell cultures grown on titanium samples prepared by a combination of mechanical and acid treatments

Titanium samples of different roughness R(a) and morphology were prepared using a combination of mechanical (grinding with a SiC paper or blasting with aluminum oxide particles with 65 or 250 microm) and chemical (attack with a sulphuric acid based solution or a hydrofluoric acid based solution) treatments. The biological performance of the prepared surfaces was evaluated using human bone marrow osteoblastic cell cultures. Mechanically treated samples presented different R(a) values and surface morphology. The hydrofluoric acid solution was more effective than the sulphuric acid solution in smoothing titanium surface and also in eliminating aluminum contamination resulting from the blasting process. Bone marrow cells seeded on the different titanium samples showed a similar pattern of behavior during cell attachment and spreading. Cells proliferated very well on all the titanium surfaces and cell growth was observed during approximately two to three weeks. The samples treated with the hydrofluoric acid solution presented higher alkaline phosphatase activity. Only the blasted samples treated with the acid solutions allowed seeded bone marrow cells to form a mineralized extracellular matrix. The best biological performance was found in the blasted samples treated with the hydrofluoric acid solution, which could be related to the characteristic microtopography of these samples that presented a homogeneous and smooth roughness.

Effects of Si speciation on the in vitro bioactivity of glasses

The surface reactivity of glasses belonging to the (mol%) 31SiO2-11P2O5-(58-x)CaO-xMgO series, with x ranging from 0 to 32, was studied in Kokubo's simulated body fluid (SBF). Scanning electron microscopy, inductively coupled plasma spectroscopy and Fourier transform infrared spectroscopy were used to characterise the glass surface and the SBF compositional changes. All glasses develop surface layers rich in silica and calcium phosphate. An increasing surface activity with increasing MgO/CaO ratio was observed. In a previous investigation using magic-angle spinning nuclear magnetic resonance it was found that there is an increasing abundance of Q0 species in the glass structure with increasing MgO content. The present work shows that, when immersed in SBF, Q0-rich glasses are easily leached to form a silica gel layer. It is concluded that MgO in the glass indirectly improves the early stages of mineralisation by favouring Q0 speciation. This mechanism plays an important role in glass bioactivity.

Role of acid attack in the in vitro bioactivity of a glass-ceramic of the 3CaO.P2O5-CaO.SiO2-CaO.MgO.2SiO2 system

A non-bioactive glass-ceramic (GC13) that contains hydroxyapatite (Ca5(PO4)3OH), diopside (CaMg(SiO3)2) and althausite (Mg2 PO4OH) as crystalline phases has been obtained by thermal treatment of a parent bioactive glass (G13) of nominal composition (wt%) 40.0 CaO-34.5 SiO2-16.5 P2O5-8.5 MgO-0.5CaF2. To induce bioactivity, GC13 was chemically treated with 1 M HCl for different periods of time. After chemical etching the in vitro studies showed formation of an apatite-like surface layer. In this article the influence of etching time both on the surface composition of the glass-ceramic and on the growth rate of the apatite layer is studied. It is concluded that the presence of hydroxyapatite in the glass-ceramic, associated to microstructural fluctuations, can favour apatite deposition in vitro.

HA and double-layer HA-P2O5/CaO glass coatings: influence of chemical composition on human bone marrow cells osteoblastic behavior

Human osteoblastic bone marrow derived cells were cultured for 28 days onto the surface of a glass reinforced hydroxyapatite (HA) composite and a commercial type HA plasma sprayed coatings, both in the "as-received" condition and after an immersion treatment with culture medium during 21 days. Cell proliferation and differentiation were analyzed as a function of the chemical composition of the coatings and the immersion treatment. Cell attachment, growth and differentiation of osteoblastic bone marrow cells seeded onto "as-received" plasma sprayed coatings were strongly affected by the time-dependent variation of the surface structure occurring during the first hours of culture. Initial interactions leading to higher amounts of adsorbed protein and zeta potential shifts towards negative charges appeared to result in surface structures with better biological performance. Cultures grown onto the pretreated coatings showed higher rate of cell proliferation and increased functional activity, as compared to those grown onto the corresponding "as-received" materials. However, the cell behavior was similar in the glass composite and HA coatings. The results showed that the glass composites present better characteristics for bone cell growth and function than HA. In addition, this work also provide evidence that the biological performance of the glass composites can be modulated and improved by manipulations in the chemical composition, namely in the content of glass added to HA.

Long-term effects of parathyroid hormone, 1,25-dihydroxyvitamin d(3), and dexamethasone on the cell growth and functional activity of human osteogenic alveolar bone cell cultures

The proliferation-differentiation behaviour of human alveolar bone cell cultures grown for 32 days in conditions that allowed the complete expression of the osteoblastic phenotype was significantly affected by the continuous presence of parathyroid hormone, 1, 25-dihydroxyvitamin D(3), or dexamethasone. Parathyroid hormone and, in particular, dexamethasone significantly induced the differentiation of osteoblastic cells. Moreover, cultures exposed to these hormones presented an earlier appearance and higher levels of alkaline phosphatase, and an increased ability to form calcium phosphate deposits in the extracellular matrix.

Human bone cell cultures in biocompatibility testing. Part II: effect of ascorbic acid, beta-glycerophosphate and dexamethasone on osteoblastic differentiation

This work analyses the proliferation/differentiation behaviour of human bone marrow cells cultured in alpha-minimum essential medium supplemented with 10% foetal bovine serum (standard medium) and in the presence of ascorbic acid (AA, 50 microg ml(-1)), beta-glycerophosphate (betaGP, 10 mmol) and dexamethasone (Dex, 10 nmol) under selected experimental conditions. Cultures were compared concerning cell morphology, cell growth, ALP activity and ability to form calcium phosphate deposits. Cells growing in the various experimental conditions proliferated gradually with the incubation time and presented high ALP activity. Cultures grown in standard medium and in the presence of either AA or Dex failed to form calcium phosphate deposits. Cultures grown in the presence of betaGP, betaGP + AA and betaGP + AA + Dex, i.e. in the presence of a source of phosphate ions, showed the formation of a mineralised extracellular matrix. The presence of Dex resulted in a significant induction in the ALP activity and ability to form mineral deposits. The behaviour of the various cell cultures is in agreement with previous studies stating a reciprocal and functionally coupled relationship between proliferation and differentiation, i.e. cultures grown in a medium containing betaGP presented a less proliferative but more differentiated osteoblastic cell population, as compared to cultures lacking the mineralisation process.

Proliferation/differentiation of osteoblastic human alveolar bone cell cultures in the presence of stainless steel corrosion products

Human osteoblastic alveolar bone cells were cultured for 28 days in control conditions and in the presence of three non-lethal concentrations of AISI 316L stainless steel (SS) corrosion products. Cells were exposed to SS corrosion products in two experimental situations: (i) in selected stages of the incubation time (during the first, second, third and fourth week of culture); and (ii) during the 28 days incubation period. Cultures were characterized for cell proliferation, total protein content, alkaline phosphatase activity (ALP) and ability to form mineralized deposits; culture media was analyzed for ionized calcium (Ca) and phosphorus (P) concentrations throughout the incubation period. The presence of SS corrosion products during the different stages of the incubation period did not significantly affect the cell proliferation; however, a significant dose-dependent deleterious effect was observed on the levels and pattern of ALP activity, concentration of ionized Ca and P in the culture medium and, also, ability to form mineralized deposits, especially in cultures exposed during the first and second week of culture (respectively, lag phase and exponential cell growth phase). Similar effects were observed in cultures exposed to the SS corrosion products during the 28 days incubation period. However, the presence of such products during the third week (when the mineralization process occurs) and, also, during the fourth week, resulted in little or no significant effects on the behavior of alveolar bone cells. Results suggested that SS corrosion products above certain non-lethal concentrations may disturb the proliferation/differentiation relationship of osteoblastic human alveolar bone cell cultures.

In vitro bioactivity of glass and glass-ceramics of the 3CaO x P2O5-CaO x SiO2-CaO x MgO x 2SiO2 system

A glass of nominal composition (wt%) 40.0 CaO-34.5 SiO2-16.5 P2O5-8.5 MgO-0.5 CaF2 has been obtained (G13). The glass showed in vitro bioactivity evidenced by the formation on its surface of a calcium phosphate-rich layer when soaked in a solution with ionic composition analogous to human plasma. By thermal treatments of G13, a glass-ceramic (GC13) containing apatite, diopside, althausite and akermanite as crystalline phases was developed. GC13 as-made did not show in vitro bioactivity. However, after chemical treatment of GC13 with 1 M HCl (GC13-HCl), the in vitro studies showed the formation of an apatite-like layer covering certain areas of the material surface. The influence of both chemical and morphological factors on the in vitro bioactivity has been studied.

Effect of stainless steel corrosion products on in vitro biomineralization

Osteoblast-like cell cultures have been used as in vitro models to study the interactions of bone tissue with biomaterials and their degradation products. This work reviews the effects of AISI 316L stainless steel (SS) corrosion products on the osteoblastic behavior of rat and human bone cell cultures. Results suggest that such products affect, in a dose-dependent manner, the proliferation and differentiation of osteoblastic cells; these effects depend on the developmental stage of the osteoblastic cells. Above certain nonlethal concentrations, SS corrosion products prevent the mineralization of the extracellular matrix, a process that reflects the complete expression of the osteoblastic phenotype.

In vitro growth and differentiation of osteoblast-like human bone marrow cells on glass reinforced hydroxyapatite plasma-sprayed coatings

Human osteoblastic bone marrow cells were cultured for periods of up to 28 days in control conditions and on the surface of a glass reinforced hydroxyapatite composite (HA/G1) and commercial hydroxyapatite (HA) plasma-sprayed coatings, in the "as-received" condition and after immersion treatment in culture medium for 21 days. Cultures were characterized for total protein content and alkaline phosphatase activity. Scanning electron microscope analyses were performed on control cultures, seeded materials and materials incubated in the absence of cells. Culture media were analyzed for total and ionized calcium and phosphorus concentrations throughout the incubation period. Immersion of HA/G1 and HA coatings in culture medium resulted in significant alterations to the levels of calcium and phosphorus in the medium, leading to surface modifications. However, seeded material samples showed significant differences in the pattern of variation of the levels of these species. Cell proliferation was observed in the "as-received" HA/G1 composite, but cell mediated formation of mineral deposits was not proved. In contrast, "as-received" HA hardly supported cell growth. Previously immersed material samples showed cell proliferation and evidence of biological formation of mineral deposits. However, the HA/G1 composite presented better surface characteristics for cell growth as the behavior of bone marrow cells was closer to that observed in control cultures.

In vitro osteoblastic differentiation of human bone marrow cells in the presence of metal ions

For periods up to 21 days human bone marrow was cultured in control conditions that favor the proliferation and differentiation of osteoblastic cells. The effect of AISI 316L corrosion products and the corresponding major separate metal ions (Fe, Cr, and Ni) were studied in three different phases of the culture period in order to investigate the effects of metal ions in cell populations representative of osteoblastic cells in different stages of differentiation. Toxicity consequences of the presence of metal ions in bone marrow cultures were evaluated by biochemical parameters (enzymatic reduction of MTT, alkaline phosphatase activity, and total protein content), histochemical assays (identification of ALP-positive cells and Ca and phosphates deposits), and observation of the cultures by light and scanning electron microscopy. Culture media were analyzed for total and ionized Ca and P and also for metal ions (Fe, Cr, and Ni). The presence of AISI 316L corrosion products and Ni salt in bone marrow cultures during the first and second weeks of culture significantly disturbs the normal behavior of these cultures, interfering in the lag phase and exponential phase of cell growth and ALP expression. However, the presence of these species during the third week of culture, when expression of osteoblastic functions occurs (mineralization process), did not result in any detectable effect. Fe salt also disturbs the behavior of bone marrow cell cultures when present during the lag phase and proliferation phase, and a somewhat compromised response between the normal pattern (control cultures) and intense inhibition (AISI 316L corrosion products and Ni salt-added cultures) was observed. Fe did not affect the progression of the mineralization phase. Osteogenic cultures exposed to Cr salt (Cr3+) presented a pattern similar to the controls, indicating that this element does not interfere, in the concentration studied, in the osteoblastic differentiation of bone marrow cells. Quantification of metal ions in the culture media showed that Cr (originated from AISI 316L corrosion products but from not Cr3+ salt) and Ni (originated from AISI 316L corrosion products and Ni salt) appear to be retained by the bone marrow cultures.