Local Spinal Cord Injury Treatment Using a Dental Pulp Stem Cell Encapsulated H2S Releasing Multifunctional Injectable Hydrogel

Spinal cord injury (SCI) commonly induces nerve damage and nerve cell degeneration. In this work, a novel dental pulp stem cells (DPSCs) encapsulated thermoresponsive injectable hydrogel with sustained hydrogen sulfide (H2S) delivery is demonstrated for SCI repair. For controlled and sustained H2S gas therapy, a clinically tested H2S donor (JK) loaded octysilane functionalized mesoporous silica nanoparticles (OMSNs) are incorporated into the thermosensitive hydrogel made from Pluronic F127 (PF-127). The JK-loaded functionalized MSNs (OMSF@JK) promote preferential M2-like polarization of macrophages and neuronal differentiation of DPSCs in vitro. OMSF@JK incorporated PF-127 injectable hydrogel (PF-OMSF@JK) has a soft consistency similar to that of the human spinal cord and thus, shows a high cytocompatibility with DPSCs. The cross-sectional micromorphology of the hydrogel shows a continuous porous structure. Last, the PF-OMSF@JK composite hydrogel considerably improves the in vivo SCI regeneration in Sprague-Dawley rats through a reduction in inflammation and neuronal differentiation of the incorporated stem cells as confirmed using western blotting and immunohistochemistry. The highly encouraging in vivo results prove that this novel design on hydrogel is a promising therapy for SCI regeneration with the potential for clinical translation.

Molecular interaction of quercetin and its derivatives against nucleolin in breast cancer: in-silico and in-vitro study

Nucleolin, a multifaceted RNA binding domain protein is overexpressed in various cancers leading to dysfunction of several cellular signaling pathways. Quercetin, a distinctive bioactive molecule, along with its derivatives have shown exclusive physio-chemical properties which makes them appealing choices for drug development, yet their role in targeted cancer therapy is limited. Here, the RBD domain structure of Nucleolin was modeled and stabilized by MD simulations for a period of 1000 ns. Molecular docking was performed to determine the binding capability of ligands with the target. To determine the stability of the ligand inside the binding pocket of the protein, MD simulation was performed for a period of 250 ns each for Quercetin-4'-o'-Glucoside, Quercetin_9 and Quercetin complexes. Further, in-vitro studies including cytotoxicity and RT-PCR assays were performed to validate quercetin against Nucleolin. Molecular docking and MD Simulation studies suggested a potential mechanism of interaction of Quercetin-4'-o'-Glucoside, Querectin_9 and Quercetin with Nucleolin with the binding free energy of -63.653, -58.86 and -46.9 kcal/mol, respectively. Moreover, Lys 348 and Glu379 were identified as important amino acids in ligand interaction located at the RRM2 motif of Nucleolin. In-vitro studies showed significant downregulation in Nucleolin expression by 15.18 and 2.51-fold at 48h and 72h respectively in MCF-7 cells with Quercetin (IC50 = 160 µM). Our findings suggested the potential role of specific RRM motifs in interaction with natural compounds targeting Nucleolin. This could be an effective strategy in the identification of potential molecules in targeting Nucleolin which can be further explored for developing targeted therapies for breast cancer.Communicated by Ramaswamy H. Sarma.

Osteoimmune-modulating and BMP-2-eluting anodised 3D printed titanium for accelerated bone regeneration

3D printing of titanium (Ti) metal has potential to transform the field of personalised orthopaedics and dental implants. However, the impacts of controlled surface topographical features of 3D printed Ti implants on their interactions with the cellular microenvironment and incorporation of biological growth factors, which are critical in guiding the integration of implants with bone, are not well studied. In the present study, we explore the role of surface topological features of 3D printed Ti implants using an anodised titania nanotube (TiNT) surface layer in guiding their immune cell interaction and ability to deliver bioactive form of growth factors. TiNT layers with precisely controlled pore diameter (between 21and 130 nm) were anodically grown on 3D printed Ti surfaces to impart a nano-micro rough topology. Immune biomarker profiles at gene and protein levels show that anodised 3D Ti surfaces with smaller pores resulted in classical activation of macrophages (M1-like), while larger pores (i.e., >100 nm) promoted alternate activation of macrophages (M2-like). The in vitro bone mineralisation studies using the conditioned media from the immunomodulatory studies elucidate a clear impact of pore diameter on bone mineralisation. The tubular structure of TiNTs was utilised as a container to incorporate recombinant human bone morphogenetic protein-2 (BMP-2) in the presence of various sugar and polymeric cryoprotectants. Sucrose offered the most sustainable release of preserved BMP-2 from TiNTs. Downstream effects of released BMP-2 on macrophages as well as bone mineralisation were assessed showing bioactivity retention of the released rhBMP-2. Overall, the TiNT surface topography in combination with controlled, sustained, and local release of bioactive growth factors can potentially enhance the osseointegration outcomes of custom 3D printed Ti implants in the clinic.

Inhibitory effects of the nanoscale lysate derived from xenogenic dental pulp stem cells in lung cancer models

BACKGROUND

Lung cancer is a highly prevalent malignancy and has the highest mortality rate among all tumors due to lymph node metastasis. Bone marrow and umbilical cord-derived mesenchymal stem cells (MSCs) have demonstrated tumor-suppressive effects on lung cancer. This study investigated the effects of DPSC lysate on proliferation, apoptosis, migration and invasion of cancer cells were studied in vivo and in vitro.

METHODS

The proliferation, apoptosis, and migration/metastasis were evaluated by cell counting kit-8 assay, Annexin-V and propidium iodide staining, and the transwell assay, respectively. The expression levels of apoptosis-, cell cycle-, migration-, and adhesion-related mRNA and proteins were measured by qRT-PCR and western blot. The level and mRNA expression of tumor markers carcino embryonic antigen (CEA), neuron-specific enolase (NSE), and squamous cell carcinoma (SCC) were measured by Enzyme-linked immunosorbent assay (ELISA) and qRT-PCR. Finally, a tumor-bearing mouse model was constructed to observe the tumor-suppressive effect of DPSC lysate after intraperitoneal injection.

RESULTS

DPSC lysate decreased the viability of A549 cells and induced apoptosis in lung cancer cells. Western blot confirmed that levels of Caspase-3, Bax, and Bad were increased, and Bcl-2 protein levels were decreased in A549 cells treated with DPSC lysate. In addition, DPSC lysate inhibited the migration and invasion of A549 cells; downregulated key genes of the cell cycle, migration, and adhesion; and significantly suppressed tumor markers. Xenograft results showed that DPSC lysate inhibited tumor growth and reduced tumor weight.

CONCLUSIONS

DPSC lysate inhibited proliferation, invasion, and metastasis; promoted apoptosis in lung cancer cells; and suppressed tumor growth- potentially providing a cell-based alternative therapy for lung cancer treatment.

Porous silicon embedded in a thermoresponsive hydrogel for intranasal delivery of lipophilic drugs to treat rhinosinusitis

Intranasal delivery is the most preferred route of drug administration for treatment of a range of nasal conditions including chronic rhinosinusitis (CRS), caused by an infection and inflammation of the nasal mucosa. However, localised delivery of lipophilic drugs for persistent nasal inflammation is a challenge especially with traditional topical nasal sprays. In this study, a composite thermoresponsive hydrogel is developed and tuned to obtain desired rheological and physiochemical properties suitable for intranasal administration of lipophilic drugs. The composite is comprised of drug-loaded porous silicon (pSi) particles embedded in a poloxamer 407 (P407) hydrogel matrix. Mometasone Furoate (MF), a lipophilic corticosteroid (log P of 4.11), is used as the drug, which is loaded onto pSi particles at a loading capacity of 28 wt%. The MF-loaded pSi particles (MF@pSi) are incorporated into the P407-based thermoresponsive hydrogel (HG) matrix to form the composite hydrogel (MF@pSi-HG) with a final drug content ranging between 0.1 wt% to 0.5 wt%. Rheomechanical studies indicate that the MF@pSi component exerts a minimal impact on gelation temperature or strength of the hydrogel host. The in-vitro release of the MF payload from MF@pSi-HG shows a pronounced increase in the amount of drug released over 8 h (4.5 to 21-fold) in comparison to controls consisting of pure MF incorporated in hydrogel (MF@HG), indicating an improvement in kinetic solubility of MF upon loading into pSi. Ex-vivo toxicity studies conducted on human nasal mucosal tissue show no adverse effect from exposure to either pure HG or the MF@pSi-HG formulation, even at the highest drug content of 0.5 wt%. Experiments on human nasal mucosal tissue show the MF@pSi-HG formulation deposits a quantity of MF into the tissues within 8 h that is >19 times greater than the MF@HG control (194 ± 7 μg of MF/g of tissue vs. <10 μg of MF/g of tissue, respectively).

Liquid-Metal Solvents for Designing Hierarchical Nanoporous Metals at Low Temperatures

Metallic nanoarchitectures hold immense value as functional materials across diverse applications. However, major challenges lie in effectively engineering their hierarchical porosity while achieving scalable fabrication at low processing temperatures. Here we present a liquid-metal solvent-based method for the nanoarchitecting and transformation of solid metals. This was achieved by reacting liquid gallium with solid metals to form crystalline entities. Nanoporous features were then created by selectively removing the less noble and comparatively softer gallium from the intermetallic crystals. By controlling the crystal growth and dealloying conditions, we realized the effective tuning of the micro-/nanoscale porosities. Proof-of-concept examples were shown by applying liquid gallium to solid copper, silver, gold, palladium, and platinum, while the strategy can be extended to a wider range of metals. This metallic-solvent-based route enables low-temperature fabrication of metallic nanoarchitectures with tailored porosity. By demonstrating large-surface-area and scalable hierarchical nanoporous metals, our work addresses the pressing demand for these materials in various sectors.

Metal-organic framework materials promote neural differentiation of dental pulp stem cells in spinal cord injury

Spinal cord injury (SCI) is accompanied by loss of Zn2+, which is an important cause of glutamate excitotoxicity and death of local neurons as well as transplanted stem cells. Dental pulp stem cells (DPSCs) have the potential for neural differentiation and play an immunomodulatory role in the microenvironment, making them an ideal cell source for the repair of central nerve injury, including SCI. The zeolitic imidazolate framework 8 (ZIF-8) is usually used as a drug and gene delivery carrier, which can release Zn2+ sustainedly in acidic environment. However, the roles of ZIF-8 on neural differentiation of DPSCs and the effect of combined treatment on SCI have not been explored. ZIF-8-introduced DPSCs were loaded into gelatin methacryloyl (GelMA) hydrogel and in situ injected into the injured site of SCI rats. Under the effect of ZIF-8, axon number and axon length of DPSCs-differentiated neuro-like cells were significantly increased. In addition, ZIF-8 protected transplanted DPSCs from apoptosis in the damaged microenvironment. ZIF-8 promotes neural differentiation and angiogenesis of DPSCs by activating the Mitogen-activated protein kinase (MAPK) signaling pathway, which is a promising transport nanomaterial for nerve repair.

Virus-like silica nanoparticles enhance macromolecule permeation in vivo

Nanoparticle based permeation enhancers have the potential to improve the oral delivery of biologics. Recently, solid silica nanoparticles were discovered to improve the intestinal permeability of peptides and proteins via transient opening of the gut epithelium. In this study, we have developed small-sized (∼60 nm) virus-like silica nanoparticles (VSNP) as a reversible and next generation non-toxic permeation enhancer for oral delivery of biologics. Our results show that the anionic VSNP showed a better permeation-enhancing effect than the same sized spherical Stöber silica nanoparticles (∼60 nm) by enhancing the apparent insulin permeability by 1.3-fold in the Caco-2 monolayer model and by 1.2-fold in the Caco-2/MTX-HT-29 co-culture model. In vivo experiments in healthy mice demonstrated that anionic VSNP significantly enhanced the permeation of fluorescently labelled 4 kDa dextran after oral administration compared to Stöber nanoparticles and positively charged VSNP. The results indicated that the nanoscale surface roughness is an important consideration when designing nanoparticle-based permeation enhancers. Overall, our study shows for the first time that small-sized (∼60 nm) VSNP with nanoscale surface roughness can be used as a non-toxic permeation enhancer for oral delivery of therapeutic peptides and proteins.

Influence of Pore Size and Surface Functionalization of Mesoporous Silica Nanoparticles on the Solubility and Antioxidant Activity of Confined Coenzyme Q10

Coenzyme Q10 is a potent antioxidant that plays an important role in the maintenance of various biochemical pathways of the body and has a wide range of therapeutic applications. However, it has low aqueous solubility and oral bioavailability. Mesoporous silica nanoparticles (MCM-41 and SBA-15 types) exhibiting varying pore sizes and modified with phosphonate and amino groups were used to study the influence of pore structure and surface chemistry on the solubility, in vitro release profile, and intracellular ROS inhibition activity of coenzyme Q10. The particles were thoroughly characterized to confirm the morphology, size, pore profile, functionalization, and drug loading. Surface modification with phosphonate functional groups was found to have the strongest impact on the solubility enhancement of coenzyme Q10 when compared to that of pristine and amino-modified particles. Phosphonate-modified MCM-41 nanoparticles (i.e., MCM-41-PO₃) induced significantly higher coenzyme Q10 solubility than the other particles studied. Furthermore, MCM-41-PO₃ led to a twofold decrease in ROS generation in human chondrocyte cells (C28/I2), compared to the free drug in a DMSO/DMEM mixture. The results confirmed the significant contribution of small pore size and negative surface charge of MSNs that enable coenzyme Q10 confinement to allow enhanced drug solubility and antioxidant activity.

Spray nebulization enables polycaprolactone nanofiber production in a manner suitable for generation of scaffolds or direct deposition of nanofibers onto cells

Spray nebulization is an elegant, but relatively unstudied, technique for scaffold production. Herein we fabricated mesh scaffolds of polycaprolactone (PCL) nanofibers via spray nebulization of 8% PCL in dichloromethane (DCM) using a 55.2 kPa compressed air stream and 17 ml h-1polymer solution flow rate. Using a refined protocol, we tested the hypothesis that spray nebulization would simultaneously generate nanofibers and eliminate solvent, yielding a benign environment at the point of fiber deposition that enabled the direct deposition of nanofibers onto cell monolayers. Nanofibers were collected onto a rotating plate 20 cm from the spray nozzle, but could be collected onto any static or moving surface. Scaffolds exhibited a mean nanofiber diameter of 910 ± 190 nm, ultimate tensile strength of 2.1 ± 0.3 MPa, elastic modulus of 3.3 ± 0.4 MPa, and failure strain of 62 ± 6%.In vitro, scaffolds supported growth of human keratinocyte cell epithelial-like layers, consistent with potential utility as a dermal scaffold. Fourier-transform infrared spectroscopy demonstrated that DCM had vaporized and was undetectable in scaffolds immediately following production. Exploiting the rapid elimination of DCM during fiber production, we demonstrated that nanofibers could be directly deposited on to cell monolayers, without compromising cell viability. This is the first description of spray nebulization generating nanofibers using PCL in DCM. Using this method, it is possible to rapidly produce nanofiber scaffolds, without need for high temperatures or voltages, yielding a method that could potentially be used to deposit nanofibers onto cell cultures or wound sites.

Inorganic/organic combination: Inorganic particles/polymer composites for tissue engineering applications

Biomaterials have ushered the field of tissue engineering and regeneration into a new era with the development of advanced composites. Among these, the composites of inorganic materials with organic polymers present unique structural and biochemical properties equivalent to naturally occurring hybrid systems such as bones, and thus are highly desired. The last decade has witnessed a steady increase in research on such systems with the focus being on mimicking the peculiar properties of inorganic/organic combination composites in nature. In this review, we discuss the recent progress on the use of inorganic particle/polymer composites for tissue engineering and regenerative medicine. We have elaborated the advantages of inorganic particle/polymer composites over their organic particle-based composite counterparts. As the inorganic particles play a crucial role in defining the features and regenerative capacity of such composites, the review puts a special emphasis on the various types of inorganic particles used in inorganic particle/polymer composites. The inorganic particles that are covered in this review are categorised into two broad types (1) solid (e.g., calcium phosphate, hydroxyapatite, etc.) and (2) porous particles (e.g., mesoporous silica, porous silicon etc.), which are elaborated in detail with recent examples. The review also covers other new types of inorganic material (e.g., 2D inorganic materials, clays, etc.) based polymer composites for tissue engineering applications. Lastly, we provide our expert analysis and opinion of the field focusing on the limitations of the currently used inorganic/organic combination composites and the immense potential of new generation of composites that are in development.

Enteric Polymer-Coated Porous Silicon Nanoparticles for Site-Specific Oral Delivery of IgA Antibody

Porous silicon (pSi) nanoparticles are loaded with Immunoglobulin A-2 (IgA2) antibodies, and the assembly is coated with pH-responsive polymers on the basis of the Eudragit family of enteric polymers (L100, S100, and L30-D55). The temporal release of the protein from the nanocomposite formulations is quantified following an in vitro protocol simulating oral delivery: incubation in simulated gastric fluid (SGF; at pH 1.2) for 2 h, followed by a fasting state simulated intestinal fluid (FasSIF; at pH 6.8) or phosphate buffer solution (PBS; at pH 7.4). The nanocomposite formulations display a negligible release in SGF, while more than 50% of the loaded IgA2 is released in solutions at a pH of 6.8 (FasSIF) or 7.4 (PBS). Between 21 and 44% of the released IgA2 retains its functional activity. A capsule-based system is also evaluated, where the IgA2-loaded particles are packed into a gelatin capsule and the capsule is coated with either EudragitL100 or EudragitS100 polymer for a targeted release in the small intestine or the colon, respectively. The capsule-based formulations outperform polymer-coated nanoparticles in vitro, preserving 45-54% of the activity of the released protein.

Adsorption of Magenta Dye on PbO Doped MgZnO: Interpretation of Statistical Physics Parameters Using Double-Layer Models

This article reports the synthesis of PbO doped MgZnO (PbO@MgZnO) by a co-precipitation method, followed by an ultrasonication process. PbO@MgZnO demonstrates a significant adsorption capability toward Magenta Dye (MD). The greatest adsorption capability was optimized by varying parameters such as pH, MD concentration, and adsorbent dose. The kinetics study illustrates that the adsorption of MD on PbO@MgZnO follows the pseudo-second-order. The isotherm study revealed that Langmuir is best fitted for the adsorption, but with little difference in the R² value of Langmuir and Freundlich, the adsorption process cloud be single or multi-layer. The maximum adsorption capacity was found to be 333.33 mg/g. The negative ΔG refers to the spontaneity of MD adsorption on PbO@MgZnO. The steric parameters from statistical physics models also favor the multi-layer adsorption mechanism. As a function of solution temperature, the parameter n pattern has values of n = 0.395, 0.290, and 0.280 for 298, 308, and 318 K, respectively (i.e., all values were below 1). Therefore, horizontal molecule positioning and multiple locking mechanisms were implicated during interactions between MD and PbO@MgZnO active sites.

Advances and future perspectives in epithelial drug delivery

Epithelial surfaces protect exposed tissues in the body against intrusion of foreign materials, including xenobiotics, pollen and microbiota. The relative permeability of the various epithelia reflects their extent of exposure to the external environment and is in the ranking: intestinal≈ nasal ≥ bronchial ≥ tracheal > vaginal ≥ rectal > blood-perilymph barrier (otic), corneal > buccal > skin. Each epithelium also varies in their morphology, biochemistry, physiology, immunology and external fluid in line with their function. Each epithelium is also used as drug delivery sites to treat local conditions and, in some cases, for systemic delivery. The associated delivery systems have had to evolve to enable the delivery of larger drugs and biologicals, such as peptides, proteins, antibodies and biologicals and now include a range of physical, chemical, electrical, light, sound and other enhancement technologies. In addition, the quality-by-design approach to product regulation and the growth of generic products have also fostered advancement in epithelial drug delivery systems.

Dissolvable polymer microneedles for drug delivery and diagnostics

Dissolvable transdermal microneedles (μND) are promising micro-devices used to transport a wide selection of active compounds into the skin. To provide an effective therapeutic outcome, μNDs must pierce the human stratum corneum (~10 to 20 μm), without rupturing or bending during penetration, then release their cargo at the predetermined area and time. The ability of dissolvable μND arrays/patches to sufficiently pierce the skin is a crucial requirement, which depends on the material composition, μND geometry and fabrication techniques. This comprehensive review not only provides contemporary knowledge on the μND design approaches, but also the materials science facilitating these delivery systems and the opportunities these advanced materials can provide to enhance clinical outcomes.

Nanomaterials: The New Antimicrobial Magic Bullet

Bacterial infections are a significant cause of mortality and morbidity worldwide, despite decades of use of numerous existing antibiotics and constant efforts by researchers to discover new antibiotics. The emergence of infections associated with antibiotic-resistant bacterial strains, has amplified the pressure to develop additional bactericidal therapies or new unorthodox approaches that can deal with antimicrobial resistance. Nanomaterial-based strategies, particularly those that do not rely on conventional small-molecule antibiotics, offer promise in part due to their ability to dodge existing mechanisms used by drug-resistant bacteria. Therefore, the use of nanomaterial-based formulations has attracted attention in the field of antibiotic therapy. In this Review, we highlight novel and emerging nanomaterial-based formulations along with details about the mechanisms by which nanoparticles can target bacterial infections and antimicrobial resistance. A detailed discussion about types and the activities of nanoparticles is presented, along with how they can be used as either delivery systems or as inherent antimicrobials, or a combination of both. Lastly, we highlight some toxicological concerns for the use of nanoparticles in antibiotic therapies.

Sustained release ketamine-loaded porous silicon-PLGA microparticles prepared by an optimized supercritical CO2 process

Ketamine in sub-anaesthetic doses has analgesic properties and an opioid-sparing effect. Intrathecal (i.t.) delivery of analgesics bypasses systemic metabolism and delivers the analgesic agent adjacent to the target receptors in the spinal cord and so small doses are required to achieve effective pain relief. In order to relieve intractable cancer-related pain, sustained-release ketamine formulations are required in combination with a strong opioid because frequent i.t. injection is not practical. In this study, ketamine or ketamine-loaded porous silicon (pSi) were encapsulated into poly(lactic-co-glycolic acid) (PLGA) microparticles by a novel supercritical carbon dioxide (scCO2) method, thereby avoiding the use of organic solvent. Multiple parameters including theoretical drug loading (DL), presence of pSi, size of scCO2 vessel, PLGA type, and use of co-solvent were investigated with a view to obtaining high DL and a sustained-release for an extended period. The most important finding was that the use of a large scCO2 vessel (60 mL) resulted in a much higher encapsulation efficiency (EE) compared with a small vessel (12 mL). In addition, pre-loading ketamine into pSi slightly improved the level of drug incorporation (i.e. EE and DL). Although the in vitro release was mainly affected by the drug payload, the use of the large scCO2 vessel reduced the burst release and extended the release period for PLGA microparticles with 10% or 20% ketamine loading. Together, our findings provide valuable information for optimization of drug delivery systems prepared with the aid of scCO2.

Role of drug delivery technologies in the success of COVID-19 vaccines: a perspective

The triumphant success of mRNA vaccines is a testimony to the important role drug delivery technologies have played in protecting billions of people against SARS-CoV-2 (or the Corona Virus Disease 2019; COVID-19). Several lipid nanoparticle (LNP) mRNA vaccines were developed and have been instrumental in preventing the disease by boosting the immune system against the pathogen, SARS-CoV-2. These vaccines have been built on decades of scientific research in drug delivery of mRNA, vaccines, and other biologicals. In this manuscript, several leading and emerging scientists in the field of drug delivery share their perspective on the role of drug delivery technologies in developing safe and efficacious vaccines, in a roundtable discussion. The authors also discussed their viewpoint on the current challenges, and the key research questions that should drive this important area of research.

Integrated approach in treatment of solid olive residue and olive wastewater

Generally olive oil generated two forms of waste by-products: solid olive residue (SOR) and olive wastewater (OWW). In the present study a promising solution is given to treat both SOR and OWW waste by-products. The first process consists of converting the solid olive residue to activated carbon using pyrolysis process at 600 °C, followed by steam activation procedure at three different temperatures. The attained activated carbon was examined by different experimental techniques such as FTIR, SEM, BET and iodine number. The surface area was increased by increasing stream activation temperature (reach 1020 m2 g−1 BET). However, the steam activation at 700 °C was found to be ideal for environmental and economic performance. On the other hand, the activated carbon at 700 °C displayed high removal capacity of both polyphenolic compounds and COD from olive wastewater. In fact, after 2 h of treatment, 95.5% of COD and 84.2% of polyphenolic compounds were completely removed.

Mesopores silica nanotubes-based sensors for the highly selective and rapid detection of Fe2+ ions in wastewater, boiler system units and biological samples

Mesopores silica nanotubes (MSNTs)-based chemical sensors for the rapid detection and of highly selective Fe²⁺ ions have been prepared. The novel nanosensors were prepared via immobilization of 1,10-phenanthroline-5-amine (PA) and bathophenanthroline (BP) onto the MSNTs. The resultant PA and BP sensors display high sensitivity for detection the Fe²⁺ ions in tap water, river water, sea water, two units in simple cycle power station, and biological samples. More interestingly, upon meeting ultra-trace amount of Fe²⁺ ions, a red complex appears at once. Color changes can be seen from the naked eye and tracked with a smartphone or spectrophotometric techniques. The response time that is necessary to achieve a stable signal was less than 15 s. The Univariate (Univar) calibration technique had been utilized for the determination of figures of merits. The detection limit obtained from the digital image analysis was 19 ppb (7.04 × 10^-7 M) for Fe²⁺ ions, while the obtained from the spectrophotometric method was 6.7 ppb (2.48 × 10^-7 M). Therefore, the two sensors had been successfully used in the determination of Fe²⁺ in several real samples with high sensitivity and selectivity. In addition, they can be used as a simple, rapid, and portable method to detect and quantify the pre rust in any cooler system.

Nanocarriers for oral delivery of biologics: small carriers for big payloads

Macromolecular therapeutics of biological origin, also known as biologics, have become one of the fastest-growing classes of drugs for management of a range of chronic and acute conditions. The majority of approved biologics are administered via the parenteral route and are thus expensive, have low patient compliance, and have high systemic toxicity. Therefore, tremendous efforts have been devoted to the development of carriers for oral delivery of biologics. This review evaluates key chemical (e.g. pH and enzymes) and physiological challenges to oral biologics delivery. We review the conventional formulation strategies and their limitations, followed by a detailed account of the progress on the use of nanocarriers used for oral biologics delivery, covering organic and inorganic nanocarriers. Lastly, we discuss limitations and opportunities presented by these emerging nanomaterials in oral biologics delivery.

Engineering mesoporous silica nanoparticles towards oral delivery of vancomycin

Vancomycin (Van) is a key antibiotic of choice for the treatment of systemic methicillin resistant Staphylococcus aureus (MRSA) infections. However, due to its poor membrane permeability, it is administered parenterally, adding to the cost and effort of treatment. The poor oral bioavailability of Van is mainly due to its physico-chemical properties that limit its paracellular and transcellular transport across gastrointestinal (GI) epithelium. Herein we report the development of silica nanoparticles (SNPs)-based formulations that are able to enhance the epithelial permeability of Van. We synthesized SNPs of different pore sizes (2 nm and 9 nm) and modified their surface charge and polarity by attaching different functional groups (-NH₂, -PO₃, and -CH₃). Van was loaded within these SNPs at a loading capacity in the range of ca. 18-29 wt%. The Van-loaded SNPs exhibited a controlled release behaviour when compared to un-encapsulated Van which showed rapid release due to its hydrophilic nature. Among Van-loaded SNPs, SNPs with large pores showed a prolonged release compared to SNPs with small pores while SNPs functionalised with -CH₃ groups exhibited a slowest release among the functionalised SNPs. Importantly, Van-loaded SNPs, especially the large pore SNPs with negative charge, enhanced the permeability of Van across an epithelial cell monolayer (Caco-2 cell model) by up to 6-fold, with P_app values up to 1.716 × 10^-5 cm s^-1 (vs. 0.304 × 10^-5 cm s^-1 for un-encapsulated Van) after 3 h. The enhancement was dependent on both the type of SNPs and their surface functionalisation. The permeation enhancing effect of SNPs was due to its ability to transiently open the tight junctions measured by decrease in transepithelial resistance (TEER) which was reversible after 3 h. All in all, our data highlights the potential of SNPs (especially SNPs with large pores) for oral delivery of Van or other antimicrobial peptides.

Frontiers in the treatment of glioblastoma: Past, present and emerging

Glioblastoma (GBM) is one of the most aggressive cancers of the brain. Despite extensive research over the last several decades, the survival rates for GBM have not improved and prognosis remains poor. To date, only a few therapies are approved for the treatment of GBM with the main reasons being: 1) significant tumour heterogeneity which promotes the selection of resistant subpopulations 2) GBM induced immunosuppression and 3) fortified location of the tumour in the brain which hinders the delivery of therapeutics. Existing therapies for GBM such as radiotherapy, surgery and chemotherapy have been unable to reach the clinical efficacy necessary to prolong patient survival more than a few months. This comprehensive review evaluates the current and emerging therapies including those in clinical trials that may potentially improve both targeted delivery of therapeutics directly to the tumour site and the development of agents that may specifically target GBM. Particular focus has also been given to emerging delivery technologies such as focused ultrasound, cellular delivery systems nanomedicines and immunotherapy. Finally, we discuss the importance of developing novel materials for improved delivery efficacy of nanoparticles and therapeutics to reduce the suffering of GBM patients.

Protein Nanoparticles for Enhanced Oral Delivery of Coenzyme-Q10: in Vitro and in Silico Studies

Coenzyme-Q10 (CoQ10) is a hydrophobic benzoquinone with antioxidant and anti-inflammatory properties. It is known to reduce oxidative stress in various health conditions. However, due to the low solubility, permeability, stability, and poor oral bioavailability, the oral dose of CoQ10 required for the desired therapeutic effect is very high. In the present study, CoQ10 is encapsulated into two milk derived proteins β-lactoglobulin and lactoferrin (BLG and LF) to produce self-assembled nanostructures of around 100-300 nm with high encapsulation efficiency (5-10% w/w). Both CoQ10-BLG and CoQ10-LF nanoparticles (NPs) significantly improved the aqueous solubility of CoQ10 60-fold and 300-fold, compared to CoQ10 alone, which hardly dissolves in water. Insight into the difference in solubility enhancement between BLG and LF was obtained using in silico modeling, which predicted that LF possesses multiple prospective CoQ10 binding sites, potentially enabling greater loading of CoQ10 on LF compared to BLG, which was predicted to be less capable of binding CoQ10. At pH 7.4, CoQ10-LF NPs showed a burst release between 30 min and 2 h then plateaued at 12 h with 30% of the total drug released over 48 h. However, pure CoQ10-BLG and pure CoQ10 had a significantly lower release rate with less than 15% and 8% cumulative release in 48 h, respectively. Most importantly, both BLG and LF NPs significantly improved CoQ10 permeability compared to the pre-dissolved drug across the Caco-2 monolayer with up to 2.5-fold apparent permeability enhancement for CoQ10-LF-further confirming the utility of this nanoencapsulation approach. Finally, in murine macrophage cells (J774A.1), CoQ10-LF NPs displayed significantly higher anti-ROS properties compared to CoQ10 (predissolved in DMSO) without affecting the cell viability. This study paves the way in improving oral bioavailability of poorly soluble drugs and nutraceuticals using milk-based self-assembled nanoparticles.

PLGA encapsulated γ-cyclodextrin-meropenem inclusion complex formulation for oral delivery

Meropenem (MER) is one of the last resort antibiotics used to treat resistant bacterial infections. However, the clinical effectiveness of MER is hindered due to chemical instability in aqueous solution and gastric pH, and short plasma half-life. Herein, a novel multi-material delivery system based on γ-cyclodextrin (γ-CD) and poly lactic-co-glycolic acid (PLGA) is demonstrated to overcome these challenges. MER showed a saturated solubility of 14 mg/100 mL in liquid CO₂ and later it was loaded into γ-CD to form the inclusion complex using the liquid CO₂ method. The γ-CD and MER inclusion complex (MER-γ-CD) was encapsulated into PLGA by the well-established double emulsion solvent evaporation method. The formation of the inclusion complex was confirmed using FTIR, XRD, DSC, SEM, and ¹H NMR and docking study. Further, MER-γ-CD loaded PLGA nanoparticles (MER-γ-CD NPs) were characterized by SEM, DLS, and FTIR. The drug loading and entrapment efficiency for MER-γ-CD were 21.9 and 92. 2% w/w, respectively. However, drug loading and entrapment efficiency of MER-γ-CD NPs was significantly lower at up to 3.6 and 42.1% w/w, respectively. In vitro release study showed that 23.6 and 27.4% of active (non-degraded drug) and total drug (both degraded and non-degraded drug) were released from MER-γ-CD NPs in 8 h, respectively. The apparent permeability coefficient (Papp) (A to B) for MER, MER-γ-CD, and MER-γ-CD NPs were 2.63 × 10^-6 cm/s, 2.81 × 10^-6 cm/s, and 2.92 × 10^-6 cm/s_, respectively. For secretory transport, the Papp (B to A) were 1.47 × 10^-6 cm/s, 1.53 × 10^-6 cm/s, and 1.58 × 10^-6 cm/s for MER, MER-γ-CD and MER-γ-CD NPs_, respectively. Finally, the MER-γ-CD inclusion complex and MER-γ-CD NPs retained MER's antibacterial activities against Staphylococcus aureus and Pseudomonas aeruginosa. Overall, this work demonstrates the significance of MER-γ-CD NPs to protect MER from gastric pH with controlled drug release, while retaining MER's antibacterial activity.

Oral meropenem for superbugs: challenges and opportunities

An increase in the number of multidrug-resistant microbial strains is the biggest threat to global health and is projected to cause >10 million deaths by 2055. The carbapenem family of antibacterial drugs are an important class of last-resort treatment of infections caused by drug-resistant bacteria and are only available as an injectable formulation. Given their instability within the gut and poor permeability across the gut wall, oral carbapenem formulations show poor bioavailability. Meropenem (MER), a carbapenem antibiotic, has broad-spectrum antibacterial activity, but suffers from the above-mentioned issues. In this review, we discuss strategies for improving the oral bioavailability of MER, such as inhibiting tubular secretion, prodrug formulations, and use of nanomedicine. We also highlight challenges and emerging approaches for the development of oral MER.

Oral Delivery of β-Lactoglobulin-Nanosphere-Encapsulated Resveratrol Alleviates Inflammation in Winnie Mice with Spontaneous Ulcerative Colitis

Resveratrol (RES) is a nutraceutical with promising anti-inflammatory properties for the treatment of inflammatory bowel diseases (IBD). However, the clinical effectiveness of resveratrol as an oral anti-inflammatory agent is hindered by its extremely poor solubility and poor stability. In this study, we encapsulated resveratrol in β-lactoglobulin (BLG) nanospheres and systematically analyzed their formulation parameters in vitro followed by a thorough in vivo anti-inflammatory testing in a highly specialized spontaneous murine UC model (Winnie mice model). Complexation of resveratrol with BLG increased the aqueous solubility of resveratrol by ≈1.7 times with 10% w/w loading. Additionally, the in vitro dissolution of resveratrol from the particles was found to be higher compared to resveratrol alone, resulting in >90% resveratrol dissolution in ∼8 h. The anti-inflammatory activity of resveratrol was examined for the first time in Winnie mice, a mouse model that closely represents the clinical signs of IBD. At a 50 mg/kg oral dose for 2 weeks, BLG-RES significantly improved both % body weight and disease activity index (DAI), compared to free resveratrol in Winnie mice. Importantly, histological evaluations revealed a similar trend with striking improvement in the pathology of the colon via an increase in goblet cell numbers and recovery of colonic epithelium. BLG-RES significantly increased the expression level of cytokine interleukin-10 (Il10), which confirms the reduction in inflammation potentially because of the increased dissolution and stability of resveratrol by complexation with BLG. This comprehensive study demonstrates the effectiveness of biocompatible nanomaterials such as BLG in oral delivery of poorly soluble anti-inflammatory molecules such as resveratrol in the treatment of IBD.

Efficient photoacoustic imaging using indocyanine green (ICG) loaded functionalized mesoporous silica nanoparticles

Photoacoustic (PA) imaging is gaining momentum due to its greater depth of field, low background, and 3D imaging capabilities. However, traditional PA imaging agents (e.g. dyes, quantum dots, etc.) are usually unstable in plasma and bind to serum proteins, and thus cleared rapidly. Because of this, the nanoparticle encapsulation of PA imaging agents is becoming increasingly popular. Therefore, the rational design of carrier nanoparticles for this purpose is necessary for strong imaging signal intensity, high biosafety, and precise targeting. Herein, we systematically evaluate the influence of the chemical and physical surface functionalization of mesoporous silica nanoparticles (MSNs) on the photo-stability, loading, release, and photoacoustic (PA) signal strength of the FDA approved small molecule contrast agent, indocyanine green (ICG). Chemical functionalization involved the modification of MSNs with silanes having amine (NH2) or phosphonate (PO3) terminal groups, whereas physical modifications were performed by capping the ICG loaded MSNs with lipid bilayer (LB) or layer-by-layer (LBL) polyelectrolyte coatings. The NH2-MSNs display the highest ICG mass loading capacity (16.5 wt%) with a limited release of ICG (5%) in PBS over 48 h, while PO3-MSNs only loaded ICG around 3.5 wt%. The physically modified MSNs (i.e. LBMSNs and LBLMSNs) were vacuum loaded resulting in approximately 9 wt% loading and less than 10% ICG release in 48 h. Pure ICG was highly photo-unstable and showed 20% reduction in photoluminescence (PL) within 3 h of exposure to 800 nm, while the ICG loaded onto functionalized MSNs did not photo-degrade. Among the tested formulations, NH2-MSNs and LBLMSNs presented 4-fold in vitro PA signal intensity enhancement at a 200 μg mL-1 equivalent ICG dose. Similar to the in vitro PA imaging, NH2-MSNs and LBLMSNs performed the best when subcutaneously injected into mouse cadavers with 1.29- and 1.43-fold PA signal enhancement in comparison to the pure ICG, respectively.

Moldless Printing of Silicone Lenses With Embedded Nanostructured Optical Filters

Optical lenses are among the oldest technological innovations (3000 years ago) and they have enabled a multitude of applications in healthcare and in our daily lives. The primary function of optical lenses has changed little over time; they serve mainly as a light-collection (e.g. reflected, transmitted, diffracted) element, and the wavelength and/or intensity of the collected light is usually manipulated by coupling with various external optical filter elements or coatings. This generally results in losses associated with multiple interfacial reflections, and increases the complexity of design and construction. In this work we introduce a change in this paradigm, by integrating both light-shaping and image magnification into a single lens element using a moldless procedure that takes advantage of the physical and optical properties of mesoporous silicon (PSi) photonic crystal nanostructures. Casting of a liquid poly(dimethyl) siloxane (PDMS) pre-polymer solution onto a PSi film generates a droplet with contact angle that is readily controlled by the silicon nanostructure, and adhesion of the cured polymer to the PSi photonic crystal allows preparation of lightweight (10 mg) freestanding lenses (4.7 mm focal length) with an embedded optical component (e.g. optical rugate filter, resonant cavity, distributed Bragg reflector). Our fabrication process shows excellent reliability (yield 95%) and low cost and we expect our lens to have implications in a wide range of applications. As a proof-of-concept, using a single monolithic lens/filter element we demonstrate: fluorescence imaging of isolated human cancer cells with rejection of the blue excitation light, through a lens that is self-adhered to a commercial smartphone; shaping the emission spectrum of a white light emitting diode (LED) to tune the color from red through blue; and selection of a narrow wavelength band (bandwidth 5 nm) from a fluorescent molecular probe.

Ceria decorated porous diatom-xerogel as an effective adsorbent for the efficient removal of Eriochrome Black T

Diatomaceous earth or diatom (DE) are naturally available and low cost micro particles with distinct porous structure were used as an adsorbent for the removal of a hazardous dye, Eriochrome Black T (EBT). The surface modification of these DE were performed by sol-gel and hydrothermal methods to obtain a series of adsorbents such as diatom-ceria (DC), diatom-silica xerogel (DX), and diatom-silica xerogel-ceria (DXC). A cauliflower like morphology structure of ceria was observed on DE and DX. The adsorption performance of EBT was conducted by varying various parameters such as pH, adsorbent dosage, initial concentration, contact time and ionic strength. The materials DE, DC, DX and DXC showed the EBT removal efficiencies of 52, 77, 20, and 93%, respectively. The maximum adsorption capacity (qm) of DE, DC, DX and DXC was found to be 13.83, 23.64, 0.2 and 47.02 mgg^-1 for the adsorption of EBT, respectively. The selectivity of EBT towards DXC was evaluated by treating a mixture of anionic dyes. The dye removal experiments was performed in presence of inorganic salts, however the presence of these salts did not affect the removal efficiency of DXC. Furthermore, the reusability of DXC was studied by recycling it up to 5 times and even at 5th cycle a removal efficiency of ∼66.8% was found. Thus, these studies demonstrate that the DXC material could be a promising candidate for the removal of EBT via adsorption for real time application in water treatment.

Encapsulation and Controlled Release of Resveratrol Within Functionalized Mesoporous Silica Nanoparticles for Prostate Cancer Therapy

Resveratrol (RES) is a naturally existing polyphenol which exhibits anti-oxidant, anti-inflammatory, and anti-cancer properties. In recent years, RES has attracted attention for its synergistic effect with other anti-cancer drugs for the treatment of drug resistant cancers. However, RES faces the issues of poor pharmacokinetics, stability and low solubility which limits its clinical application. In present study, RES has been loaded onto uniformly sized (~60 nm) mesoporous silica nanoparticles (MSNs) to improve its in vitro anti-proliferative activity and sensitization of Docatexal in hypoxia induced drug resistance in prostate cancer. RES was efficiently encapsulated within phosphonate (negatively charged) and amine (positively charged) modified MSNs. The effect of surface functionalization was studied on the loading, in vitro release, anti-proliferative and cytotoxic potential of RES using prostate cancer cell line. At pH 7.4 both free and NH2-MSNs loaded RES showed burst release which was plateaued with almost 90% of drug released in first 12 h. On the other hand, PO3-MSNs showed significantly slower release kinetics with only 50% drug release in first 12 h at pH 7.4. At pH 5.5, however, both the PO3-MSNs and NH2-MSNs showed significant control over release (around 40% less release compared with free RES in 24 h). Phosphonate modified MSNs significantly enhanced the anti-proliferative potential of RES with an IC50 of 7.15 μM as compared to 14.86 μM of free RES whereas amine modified MSNs didn't affect proliferation with an IC50 value higher than free RES (20.45 μM). Furthermore, RES loaded onto PO3-MSNs showed robust and dose dependent sensitization of Docatexal in hypoxic cell environment which was comparable to pure RES solution. This study provides an example of applicability of MSNs loaded with polyphenols such as RES as next generation anticancer formulations for treating drug resistant cancers such as prostate cancer.

Luminescent Porous Silicon Nanoparticles for Continuous Wave and Time-Gated Photoluminescence Imaging

Luminescent porous silicon nanoparticles (LpSiNPs) display red-orange photoluminescence (PL) that provides large penetration depth for precise deep-tissue imaging and diagnostics. Herein, we describe in detail the fabrication process of porous silicon nanoparticles (pSiNPs), activation of photoluminescence, quantum yield measurement, and PL imaging. LpSiNPs perform as imaging probe for both the continuous wave and time-gated PL imaging.

Rationally Designed Dendritic Silica Nanoparticles for Oral Delivery of Exenatide

Type 2 diabetes makes up approximately 85% of all diabetic cases and it is linked to approximately one-third of all hospitalisations. Newer therapies with long-acting biologics such as glucagon-like peptide-1 (GLP-1) analogues have been promising in managing the disease, but they cannot reverse the pathology of the disease. Additionally, their parenteral administration is often associated with high healthcare costs, risk of infections, and poor patient adherence associated with phobia of needles. Oral delivery of these compounds would significantly improve patient compliance; however, poor enzymatic stability and low permeability across the gastrointestinal tract makes this task challenging. In the present work, large pore dendritic silica nanoparticles (DSNPs) with a pore size of ~10 nm were prepared, functionalized, and optimized in order to achieve high peptide loading and improve intestinal permeation of exenatide, a GLP-1 analogue. Compared to the loading capacity of the most popular, Mobil Composition of Matter No. 41 (MCM-41) with small pores, DSNPs showed significantly high loading owing to their large and dendritic pore structure. Among the tested DSNPs, pristine and phosphonate-modified DSNPs (PDSNPs) displayed remarkable loading of 40 and 35% w/w, respectively. Furthermore, particles successfully coated with positively charged chitosan reduced the burst release of exenatide at both pH 1.2 and 6.8. Compared with free exenatide, both chitosan-coated and uncoated PDSNPs enhanced exenatide transport through the Caco-2 monolayer by 1.7 fold. Interestingly, when a triple co-culture model of intestinal permeation was used, chitosan-coated PDSNPs performed better compared to both PDSNPs and free exenatide, which corroborated our hypothesis behind using chitosan to interact with mucus and improve permeation. These results indicate the emerging role of large pore silica nanoparticles as promising platforms for oral delivery of biologics such as exenatide.

Environmental Copper Sensor Based on Polyethylenimine-Functionalized Nanoporous Anodic Alumina Interferometers

Anthropogenic copper pollution of environmental waters from sources such as acid mine drainage, antifouling paints, and industrial waste discharge is a major threat to our environment and human health. This study presents an optical sensing system that combines self-assembled glutaraldehyde-cross-linked double-layered polyethylenimine (PEI-GA-PEI)-modified nanoporous anodic alumina (NAA) interferometers with reflectometric interference spectroscopy (RIfS) for label-free, selective monitoring of ionic copper in environmental waters. Calibration of the sensing system with analytical solutions of copper shows a linear working range between 1 and 100 mg L-1, and a low limit of detection of 0.007 ± 0.001 mg L-1 (i.e., ∼0.007 ppm). Changes in the effective optical thickness (ΔOTeff) of PEI-GA-PEI-functionalized NAA interferometers are monitored in real-time by RIfS, and correlated with the amount of ionic copper present in aqueous solutions. The system performance is validated through X-ray photoelectron spectroscopy (XPS) and the spatial distribution of copper within the nanoporous films is characterized by time-of-flight-secondary ion mass spectroscopy (TOF-SIMS). The specificity and chemical selectivity of the PEI-GA-PEI-NAA sensor to Cu2+ ions is verified by screening six different metal ion solutions containing potentially interfering ions such as Al3+, Cd2+, Fe3+, Pb2+, Ni2+, and Zn2+. Finally, the performance of the PEI-GA-PEI-NAA sensor for real-life applications is demonstrated using legacy acid mine drainage liquid and tap water for qualitative and quantitative detection of copper ions. This study provides new opportunities to develop portable, cost-competitive, and ultrasensitive sensing systems for real-life environmental applications.

An improved strategy for transferring and adhering thin nanoporous alumina membranes onto conducting transparent electrodes for template assisted electrodeposition of high aspect ratio semiconductor nanowires with increased optical absorption

This article presents a new method for transferring and enhancing the adhesion of thin nanoporous alumina (NPA) membranes onto non-atomically flat substrates like fluorine-doped tin oxide (FTO) coated glass. The study reports use of glycerol as an additive to reduce the brittleness of the polystyrene filler that was used to fill the pores of the NPA membrane. Additionally, a new reflux-based method is reported here for the complete removal of the polystryrene filler from the porous channels of alumina. The adhesion between an NPA membrane and an underlying electrode was enhanced by electrodepositing a thin (∼40 nm) intermediate layer of the conducting polymer polyaniline (PANI). The PANI layer acts as an efficient electrostatic adhesive between the NPA and the conducting glass electrode and ensures ultra-strong adhesion of the NPA membrane, which can survive the harsh conditions of CdTe nanowire electrodeposition (60 °C temperature and an acidic electrolyte) without delamination for 30 min. The resulting nanowires clearly templated the structure of NPA and displayed free-standing nanowires over a large area with a diameter of around 60 nm, a length of approximately 2.8 μm (aspect ratio ∼47) and an areal density of 5.9 × 10¹² nanowires cm^-2. Total optical absorption measurement on the free-standing CdTe nanowires exhibited a 45% enhancement over a wavelength range of 350-1400 nm as compared to a CdTe planar thin film of same thickness.

Enhanced Solubility, Permeability and Anticancer Activity of Vorinostat Using Tailored Mesoporous Silica Nanoparticles

Suberoylanilide hydroxamic acid (SAHA) or vorinostat (VOR) is a potent inhibitor of class I histone deacetylases (HDACs) that is approved for the treatment of cutaneous T-cell lymphoma. However, it has the intrinsic limitations of low water solubility and low permeability which reduces its clinical potential especially when given orally. Packaging of drugs within ordered mesoporous silica nanoparticles (MSNs) is an emerging strategy for increasing drug solubility and permeability of BCS (Biopharmaceutical Classification System) class II and IV drugs. In this study, we encapsulated vorinostat within MSNs modified with different functional groups, and assessed its solubility, permeability and anti-cancer efficacy in vitro. Compared to free drug, the solubility of vorinostat was enhanced 2.6-fold upon encapsulation in pristine MSNs (MCM-41-VOR). Solubility was further enhanced when MSNs were modified with silanes having amino (3.9 fold) or phosphonate (4.3 fold) terminal functional groups. Moreover, permeability of vorinostat into Caco-2 human colon cancer cells was significantly enhanced for MSN-based formulations, particularly MSNs modified with amino functional group (MCM-41-NH₂-VOR) where it was enhanced ~4 fold. Compared to free drug, vorinostat encapsulated within amino-modified MSNs robustly induced histone hyperacetylation and expression of established histone deacetylase inhibitor (HDACi)-target genes, and induced extensive apoptosis in HCT116 colon cancer cells. Similar effects were observed on apoptosis induction in HH cutaneous T-cell lymphoma cells. Thus, encapsulation of the BCS class IV molecule vorinostat within MSNs represents an effective strategy for improving its solubility, permeability and anti-tumour activity.

Diatom Silica for Biomedical Applications: Recent Progress and Advances

Diatoms are unicellular photosynthetic algae enclosed in porous 3D nanopatterned silica enclosures called "frustules." The diatom frustules are made from biosilica self-assembled into intricate porous shells that feature unique properties including high specific surface area, biocompatibility, tailorable surface chemistry, thermal stability, and high mechanical and chemical resistance. The ability to cultivate diatoms in artificial environments and their abundant availability of diatom frustules as mineable fossilized mineral deposits (diatomite or diatomaceous earth; DE) make diatom silica a promising natural alternative to synthetic porous silica for a broad range of biomedical, environmental, agricultural, and energy applications. This review article provides a comprehensive and current account of the use of natural DE silica materials in biomedical applications focused mainly on drug delivery with some highlights on biosensing, tissue engineering, and clotting agents. The article also covers some basic physical and chemical aspects of DE material such as purification, surface chemical functionalization, biocompatibility, and cellular uptake that are critical for the development of an efficient drug carrier.

Oriented Nanofibrous Polymer Scaffolds Containing Protein-Loaded Porous Silicon Generated by Spray Nebulization

Oriented composite nanofibers consisting of porous silicon nanoparticles (pSiNPs) embedded in a polycaprolactone or poly(lactide-co-glycolide) matrix are prepared by spray nebulization from chloroform solutions using an airbrush. The nanofibers can be oriented by an appropriate positioning of the airbrush nozzle, and they can direct growth of neurites from rat dorsal root ganglion neurons. When loaded with the model protein lysozyme, the pSiNPs allow the generation of nanofiber scaffolds that carry and deliver the protein under physiologic conditions (phosphate-buffered saline (PBS), at 37 °C) for up to 60 d, retaining 75% of the enzymatic activity over this time period. The mass loading of protein in the pSiNPs is 36%, and in the resulting polymer/pSiNP scaffolds it is 3.6%. The use of pSiNPs that display intrinsic photoluminescence (from the quantum-confined Si nanostructure) allows the polymer/pSiNP composites to be definitively identified and tracked by time-gated photoluminescence imaging. The remarkable ability of the pSiNPs to protect the protein payload from denaturation, both during processing and for the duration of the long-term aqueous release study, establishes a model for the generation of biodegradable nanofiber scaffolds that can load and deliver sensitive biologics.

Self-Reporting Photoluminescent Porous Silicon Microparticles for Drug Delivery

A porous Si (pSi) microparticle-based delivery system is investigated, and the intrinsic luminescence from the particles is employed as a probe to monitor the release of a model protein payload, bovine serum albumin (BSA). The microparticles consist of a core Si skeleton surrounded by a SiO₂ shell. Two types of pSi are tested, one with smaller (10 nm) pores and the other with larger (20 nm) pores. The larger pore material yields a higher mass loading of BSA (3 vs 20%). Two different methods are used to load BSA into these nanostructures: the first involves loading by electrostatic physisorption, and the second involves trapping of BSA in the pSi matrix by local precipitation of magnesium silicate. Protein release from the former system is characterized by a burst release, whereas in the latter system, release is controlled by dissolution of the pSi/magnesium silicate matrix. The protein release characteristics are studied under accelerated (0.1 M aqueous KOH, 21 °C) and physiologically relevant (phosphate-buffered saline, pH 7.4, 37 °C) conditions, and the near-infrared photoluminescence signal from the pSi skeleton is monitored as a function of time and correlated with protein release and silicon dissolution. The thickness of the Si core and the SiO₂ shell are systematically varied, and it is found that the luminescence signature can be tuned to provide a signal that either scales with protein elution or that changes rapidly near the end of useful life of the delivery system. Although payload release and particle dissolution are not driven by the same mechanism, the correlations between luminescence and payload elution for the various formulations can be used to define design rules for this self-reporting delivery system.