Synergistic Construction of Superhydrophilic PVDF Membranes by Dual Modification Strategies for Efficient Emulsion Separation

Solving the problem of oil and water pollution is an important topic in environmental protection. The separation of oil-water emulsion with high efficiency and low consumption has been the direction of social efforts. Membrane separation technology combined with surface wettability and pore size screening is considered to be one of the most promising ways to separate oil-water emulsions. In this paper, the polyvinylidene difluoride (PVDF) membrane is prepared by combining the two methods of blending and coating modification as a double barrier. The prepared PVDF membrane can completely wet water, achieve superhydrophilic in air, and superoleophobic underwater. The separation efficiency and flux are 99.57% and 678 L h-1 m-2 bar-1, respectively, for toluene emulsions containing surfactants with an average particle size of 1.7 µm. At the same time, it can also effectively separate different kinds of light/heavy oils. After three cycles of testing still maintain high efficiency of separation. The results show that the prepared PVDF membrane can effectively separate the emulsion containing surfactant with smaller particle size distribution of oil droplets. This method provides a new strategy for the separation of oil-water emulsions and has broad application prospects.

Self-Cleaning Highly Porous TiO2 Coating Designed by Swelling-Assisted Sequential Infiltration Synthesis (SIS) of a Block Copolymer Template

Photocatalytic self-cleaning coatings with a high surface area are important for a wide range of applications, including optical coatings, solar panels, mirrors, etc. Here, we designed a highly porous TiO2 coating with photoinduced self-cleaning characteristics and very high hydrophilicity. This was achieved using the swelling-assisted sequential infiltration synthesis (SIS) of a block copolymer (BCP) template, which was followed by polymer removal via oxidative thermal annealing. The quartz crystal microbalance (QCM) was employed to optimize the infiltration process by estimating the mass of material infiltrated into the polymer template as a function of the number of SIS cycles. This adopted swelling-assisted SIS approach resulted in a smooth uniform TiO2 film with an interconnected network of pores. The synthesized film exhibited good crystallinity in the anatase phase. The resulting nanoporous TiO2 coatings were tested for their functional characteristics. Exposure to UV irradiation for 1 h induced an improvement in the hydrophilicity of coatings with wetting angle reducing to unmeasurable values upon contact with water droplets. Furthermore, their self-cleaning characteristics were tested by measuring the photocatalytic degradation of methylene blue (MB). The synthesized porous TiO2 nanostructures displayed promising photocatalytic activity, demonstrating the degradation of approximately 92% of MB after 180 min under ultraviolet (UV) light irradiation. Thus, the level of performance was comparable to the photoactivity of commercial anatase TiO2 nanoparticles of the same quantity. Our results highlight a new robust approach for designing hydrophilic self-cleaning coatings with controlled porosity and composition.

Superhydrophilic and Antifriction Thin Hydrogel Formed under Mild Conditions for Medical Bare Metal Guide Wires

Medical guide wires play a crucial role in the process of intravascular interventional therapy. However, it is essential for bare metal guide wires to possess both hydrophilic lubricity and coating durability, avoiding tissue damage caused by friction inside the blood vessel during the interventional procedure. Additionally, it is still a huge challenge for diverse metal materials to bind with polymer coatings easily. Herein, we present a hydrogel coating scheme and its preparation method for various wires under mild conditions for environmental protection purposes. The preparation process involves surface pretreatment, including low-temperature heating and silanization, followed by a two-step dip coating and ultraviolet polymerization. The whole process leads to the formation of an interpenetrating cross-linked hydrogel network from the substrate to the surface section. This study confirms the superhydrophilicity and lubricity of three metal wires with the designed coating, especially reducing the friction significantly by ≥ 95%. The thin coating (average thickness <6.2 μm) demonstrates strong adhesion with various substrates and exhibits resistance to 25 or even 125 cycles of friction, indicating excellent stability and preventing easy detachment. The finally prepared composite nickel-titanium (NiTi) guide wire with stainless steel (SS) and platinum-tungsten (Pt-W) coils (overall diameter of ∼0.36 mm) shows satisfactory performance with a friction of 0.183 N for 25 cycles, meeting the clinical requirements (average friction ≤0.2 N) for interventional operation. These findings highlight the potential of this study in advancing the development of medical devices, particularly in the field of intravascular interventional therapy.

Study of the Antibacterial Activity of Superhydrophilic and Superhydrophobic Copper Substrates against Multi-Drug-Resistant Hospital-Acquired Pseudomonas aeruginosa Isolates

The global spread of multidrug-resistant (MDR) hospital-acquired pathogens is a serious problem for healthcare units. The challenge of the spreading of nosocomial infections, also known as hospital-acquired pathogens, including Pseudomonas aeruginosa, must be addressed not only by developing effective drugs, but also by improving preventive measures in hospitals, such as passive bactericidal coatings deposited onto the touch surfaces. In this paper, we studied the antibacterial activity of superhydrophilic and superhydrophobic copper surfaces against the P. aeruginosa strain PA103 and its four different polyresistant clinical isolates with MDR. To fabricate superhydrophilic and superhydrophobic coatings, we subjected the copper surfaces to laser processing with further chemosorption of fluorooxysilane to get a superhydrophobic substrate. The antibacterial activity of superhydrophilic and superhydrophobic copper surfaces was shown, with respect to both the collection strain PA103 and polyresistant clinical isolates of P. aeruginosa, and the evolution of the decontamination of a bacterial suspension is presented and discussed. The presented results indicate the promising potential of the exploitation of superhydrophilic coatings in the manufacture of contact surfaces for healthcare units, where the risk of infection spread and contamination by hospital-acquired pathogens is extremely high.

N-Halamine-Based Polypropylene Melt-Blown Nonwoven Fabric with Superhydrophilicity and Antibacterial Properties for Face Masks

Polypropylene melt-blown nonwoven fabric (PP MNF) masks can effectively block pathogens in the environment from entering the human body. However, the adhesion of surviving pathogens to masks poses a risk of human infection. Thus, embedding safe and efficient antibacterial materials is the key to solving pathogen infection. In this study, stable chlorinated poly(methacrylamide-N,N'-methylenebisacrylamide) polypropylene melt-blown nonwoven fabrics (PP-P(MAA-MBAA)-Cl MNFs) have been fabricated by a simple UV cross-link and chlorination process, and the active chlorine content can reach 3500 ppm. The PP-P(MAA-MBAA)-Cl MNFs show excellent hydrophilic and antibacterial properties. The PP-P(MAA-MBAA)-Cl MNFs could kill all bacteria (both Escherichia coli and Staphylococcus aureus) with only 5 min of contact. Therefore, incorporating PP-P(MAA-MBAA)-Cl MNF as a hydrophilic antimicrobial layer into a four-layer PP-based mask holds great potential for enhancing protection and comfort.

A Redox-Active Covalent Organic Framework with Highly Accessible Aniline-Fused Quinonoid Units Affords Efficient Proton Charge Storage

Owing to their intrinsic safety and sustainability, aqueous proton batteries have emerged as promising energy devices. Nevertheless, the corrosion or dissolution of electrode materials in acidic electrolytes must be addressed before practical applications. In this study, a cathode material based on a redox-active 2D covalent organic framework (TPAD-COF) with aniline-fused quinonoid units featuring inherently regular open porous channels and excellent stability is developed. The TPAD-COF cathode delivers a high capacity of 126 mAh g-1 at 0.2 A g-1 , paired with long-term cycling stability with capacity retention of 84% after 5000 cycles at 2 A g-1 . Comprehensive ex situ spectroscopy studies correlated with density functional theory (DFT) calculations reveal that both the -NH- and C=O groups of the aniline-fused quinonoid units exhibit prominent redox activity of six electrons during the charge/discharge processes. Furthermore, the assembled punch battery consisting of a TPAD-COF//anthraquinone (AQ) all-organic system delivers a discharge capacity of 115 mAh g-1 at 0.5 A g-1 after 130 cycles, implying the potential application of the TPAD-COF cathode in aqueous proton batteries. This study provides a new perspective on the design of electrode materials for aqueous proton batteries with long-term cycling performance and high capacity.

Superhydrophilic Poly(2-hydroxyethyl methacrylate) Hydrogel with Nanosilica Covalent Coating: A Promising Contact Lens Material for Resisting Tear Protein Deposition and Bacterial Adhesion

Tear protein deposition and bacterial adhesion are the main drawbacks of the hydrogel contact lens. In this study, we developed a novel superhydrophilic poly(2-hydroxyethyl methacrylate) (NSCC-pHEMA) hydrogel with nanosilica covalent coating by the combination of colloidal silica immersion and dehydration treatment. The infrared spectroscopy and energy dispersive X-ray spectroscopy analyses confirmed the successful formation of Si-O covalent bonding between nanosilica and pHEMA hydrogel. This coating was highly stable against powerful sonication or long-term shaking immersion treatment. Among various NSCC-pHEMA hydrogels with different colloidal silica concentrations, the 7%NSCC-pHEMA hydrogel generated a superhydrophilic micro wrinkle surface with a root-mean-square roughness of 43.10 nm, which dramatically reduced the deposition of lysozyme and bovine serum albumin by 65% and 57%, respectively, and decreased the adhesion of S. aureus and E. coli by 59% and 66%, respectively, in comparison to the pHEMA hydrogel. However, the nanosilica coating had little effect on the mechanical properties, light transmittance, oxygen permeability, and equilibrium water content of the pHEMA hydrogel. NSCC-pHEMA hydrogels were nontoxic to both mouse fibroblasts (L929) and human immortalized keratinocytes (HaCaT). Thus, the superhydrophilic NSCC-pHEMA hydrogel is a potential contact lens material for resisting tear protein deposition and bacterial adhesion.

Self-Oxidation Resistance of the Curved Surface of Achromatic Copper

Copper surfaces that exhibit a wide range of achromatic colors while still metallic have not been studied, despite advancements in antireflection coatings. A series of achromatic copper films grown with [111] preferred orientation by depositing 3D porous nanostructures is introduced via coherent/incoherent atomic sputtering epitaxy. The porous copper nanostructures self-regulate the giant oxidation resistance by constructing a curved surface that generates a series of monoatomic steps, followed by shrinkage of the lattice spacing of one or two surface layers. First-principles calculations confirm that these structural components cooperatively increase the energy barrier against oxygen penetration. The achromaticity of the single-crystalline porous copper films is systematically tuned by geometrical parameters such as pore size distribution and 3D linkage. The optimized achromatic copper films with high oxidation resistance show an unusual switching effect between superhydrophilicity and superhydrophobicity. The tailored 3D porous nanostructures can be a candidate material for numerous applications, such as antireflection coatings, microfluidic devices, droplet tweezers, and reversible wettability switches.

Ultrafine NiFe-Based (Oxy)Hydroxide Nanosheet Arrays with Rich Edge Planes and Superhydrophilic-Superaerophobic Characteristics for Oxygen Evolution Reaction

NiFe-based (oxy)hydroxides are the benchmark catalysts for the oxygen evolution reaction (OER) in alkaline medium, however, it is still challenging to control their structures and compositions. Herein, molybdates (NiFe(MoO4 )x ) are applied as unique precursors to synthesize ultrafine Mo modified NiFeOx Hy (oxy)hydroxide nanosheet arrays. The electrochemical activation process enables the molybdate ions (MoO4 2- ) in the precursors gradually dissolve, and at the same time, hydroxide ions (OH- ) in the electrolyte diffuse into the precursor and react with Ni2+ and Fe3+ ions in confined space to produce ultrafine NiFeOx Hy (oxy)hydroxides nanosheets (<10 nm), which are densely arranged into microporous arrays and maintain the rod-like morphology of the precursor. Such dense ultrafine nanosheet arrays produce rich edge planes on the surface of NiFeOx Hy (oxy)hydroxides to expose more active sites. More importantly, the capillary phenomenon of microporous structures and hydrophilic hydroxyl groups induce the superhydrophilicity and the rough surface produces the superaerophobic characteristic for bubbles. With these advantages, the optimized catalyst exhibits excellent performance for OER, with a small overpotential of 182 mV at 10 mA cm-2 and long-term stability (200 h) at 200 mA cm-2 . Theoretical calculations show that the modification of Mo enhances the electron delocalization and optimizes the adsorption of intermediates.

Balancing Volmer Step by Superhydrophilic Dual-Active Domains for Enhanced Hydrogen Evolution

The reaction kinetics of hydrogen evolution reaction (HER) is largely determined by balancing the Volmer step in alkaline media. Bifunctionality as a proposed strategy can divide the work of water dissociation and intermediates (OH* and H*) adsorption/desorption. However, sluggish OH* desorption plagues water re-adsorption, which leads to poisoning effects of active sites. Some active sites may even directly act as spectators and do not participate in the reaction. Furthermore, the activity comparison under approximate nanostructure between bifunctional effect and single-exposed active sites is not fully understood. Here, a facile three-step strategy is adopted to successfully grow molybdenum disulfide (MoS2 ) on cobalt-containing nitrogen-doped carbon nanotubes (Co-NCNTs), forming obvious dual active domains. The active sites on domains of Co-NCNTs and MoS2  and the tuned electronic structure at the heterointerface trigger the bifunctional effect to balance the Volmer step and improve the catalytic activity. The HER driven by the bifunctional effect can significantly optimize the Gibbs free energy of water dissociation and hydrogen adsorption, resulting in fast reaction kinetics and superior catalytic performance. As a result, the Co-NCNTs/MoS2  catalyst outperforms other HER electrocatalysts with low overpotential (58 and 84 mV at 10 mA cm-2  in alkaline and neutral conditions, respectively), exceptional stability, and negligible degradation.

Dynamic Wetting Properties of Silica-Poly (Acrylic Acid) Superhydrophilic Coatings

Superhydrophilic coatings based on a hydrophilic silica nanoparticle suspension and Poly (acrylic acid) (PAA) were prepared by dip coating. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) were used to examine the morphology of the coating. The effect of surface morphology on the dynamic wetting behavior of the superhydrophilic coatings was studied by changing the silica suspension concentration from 0.5% wt. to 3.2% wt. while keeping the silica concentration in the dry coating constant. The droplet base diameter and dynamic contact angle with respect to time were measured using a high-speed camera. A power law was found to describe the relationship between the droplet diameter and time. A significantly low experimental power law index was obtained for all the coatings. Both roughness and volume loss during spreading were suggested to be responsible for the low index values. The water adsorption of the coatings was found to be the reason for the volume loss during spreading. The coatings exhibited good adherence to the substrates and retention of hydrophilic properties under mild abrasion.

Experimental Study on Capillary Microflows in High Porosity Open-Cell Metal Foams

Metal foams have been widely used in heat pipes as wicking materials. The main issue with metal foams is the surface property capillary limit. In this paper, a chemical blackening process for creating a superhydrophilic surface on copper foams is studied with seven different NaOH and NaClO₂ solution concentrations (1.5~4.5 mol/L), in which the microscopic morphology of the treated copper foam surface is analyzed by scanning electron microscopy. The capillary experiments are carried out to quantify the wicking characteristics of the treated copper foams and the results are compared with theoretical models. A the microscope is used to detect the flow stratification characteristics of the capillary rise process. The results show that the best wicking ability is obtained for the oxidation of copper foam using 3.5 mol/L of NaOH and NaClO₂ solution. Gravity plays a major role in defining the permeability and effective pore radius, while the effect of evaporation can be ignored. The formation of a fluid stratified interface between the unsaturated and saturated zone results in capillary performance degradation. The current study is important for understanding the flow transport in porous materials.

Wetting Characteristics of Nanosilica-Poly (acrylic acid) Transparent Anti-Fog Coatings

The effect of particle loading on the wetting properties of coatings was investigated by modifying a coating formulation based on hydrophilic silica nanoparticles and poly (acrylic acid) (PAA). Water contact angle (WCA) measurements were conducted for all coatings to characterize the surface wetting properties. Wettability was improved with an increase in particle loading. The resulting coatings showed superhydrophilic (SH) behavior when the particle loading was above 53 vol. %. No new peaks were detected by attenuated total reflection (ATR-FTIR). The surface topography of the coatings was studied by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The presence of hydrophilic functional groups and nano-scale roughness were found to be responsible for superhydrophilic behavior. The surface chemistry was found to be a primary factor determining the wetting properties of the coatings. Adhesion of the coatings to the substrate was tested by tape test and found to be durable. The antifogging properties of the coatings were evaluated by exposing the films under different environmental conditions. The SH coatings showed anti-fogging behavior. The transparency of the coatings was significantly improved with the increase in particle loading. The coatings showed good transparency (>85% transmission) when the particle loading was above 84 vol. %.

Realizing Interfacial Electron/Hole Redistribution and Superhydrophilic Surface through Building Heterostructural 2 nm Co0.85 Se-NiSe Nanograins for Efficient Overall Water Splittings

Electrochemical overall water splitting using renewable energy input is highly desirable for large-scale green hydrogen generation, but it is still challenged due to the lack of low-cost, durable, and highly efficient electrocatalysts. Herein, 1D nanowires composed of numerous 2 nm Co_0.85 Se-NiSe nanograin heterojunctions as efficient precious metal-free bifunctional electrocatalyst are reported for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline solution with the merits of high activity, durability, and low cost. The abundant microinterface among the ultrafine nanograins and the presence of lattice distortion around nanograin interface is found to create a superhydrophilic surface of the electrocatalyst, which significantly facilitate the fast diffusion of electrolytes and the release of the formed H₂ and O₂ from the catalyst surface. Furthermore, synergic effect between Co_0.85 Se and NiSe grain on adjusting the electronic structure is revealed, which enhances electron mobility for fast electron transport during the HER/OER process. Owing to these merits, the rationally designed Co_0.85 Se-NiSe heterostructures display efficient overall water splitting behavior with a low voltage of 1.54 V at 10 mA cm^-2 and remarkable long-term durability for the investigated period of 50 h.

Superhydrophilic Modification of Polycarbonate Substrate Surface by Organic Plasma Polymerization Film

Superhydrophilicity performs well in anti-fog and self-cleaning applications. In this study, polycarbonate substrate was used as the modification object because of the low surface energy characteristics of plastics. Procedures that employ plasma bombardment, such as etching and high surface free energy coating, are applied to improve the hydrophilicity. An organic amino silane that contains terminal amine group is introduced as the monomer to perform plasma polymerization to ensure that hydrophilic radicals can be efficiently deposited on substrates. Different levels of hydrophilicity can be reached by modulating the parameters of plasma bombardment and polymerization, such as plasma current, voltage of the ion source, and bombardment time. The surface of a substrate that is subjected to plasma bombarding at 150 V, 4 A for 5 min remained superhydrophilic for 17 days. After 40 min of Ar/O2 plasma bombardment, which resulted in a substrate surface roughness of 51.6 nm, the plasma polymerization of organic amino silane was performed by tuning the anode voltage and operating time of the ion source, and a water contact angle < 10° and durability up to 34 days can be obtained.

Evolution of Superhydrophilic Aluminum Alloy Properties in Contact with Water during Cyclic Variation in Temperature

Hydrophilic or superhydrophilic materials in some cases are considered to be potentially icephobic due to a low ice-adhesion strength to such materials. Here, the evolution of the properties of a superhydrophilic aluminum alloy with hierarchical roughness, fabricated by laser processing, was studied in contact with water during prolonged cyclic variation in temperature. It was shown that the chemical interaction of rough alumina with water molecules caused the substitution of the surface oxide by polymorphic crystalline gibbsite or bayerite phases while preserving hierarchical roughness. Due to such substitution, mechanical durability was notably compromised. Thus, in contrast to the superhydrophobic laser-processed samples, the superhydrophilic samples targeted on the exploitation in an open atmosphere as a material with anti-icing properties cannot be considered as the industrially attractive way to combat icing.

Enhanced Phase-Change Heat Transfer by Surface Wettability Control

The phase-change heat-transfer coefficient can be improved by several orders of magnitude through the design of micro-nanostructures on typical surfaces. However, with the rapid development of intelligent and integrated devices, there is an increasing desire to regulate the heat exchange form of the surface to adapt to various environmental requirements. This study concerns the design of a carbon nanotube array-based phase-change heat-transfer surface, which can switch its wettability between superhydrophobicity and superhydrophilicity. By installing this surface on a device that integrates boiling heat transfer and condensation heat transfer, the device can independently adjust the surface wettability for different heat-transfer requirements. As a result, this surface can enhance condensation heat-transfer coefficient over 90 % in the superhydrophobic state and enhance the boiling heat-transfer coefficient over 41 % in the superhydrophilic state. Surfaces with controllable wettability can aid development of a new generation of smart control technologies to actively regulate system and device temperatures.

Biomimetic Aligned Micro-/Nanofibrous Composite Membranes with Ultrafast Water Transport and Evaporation for Efficient Indoor Humidification

Humidifying membranes with ultrafast water transport and evaporation play a vital role in indoor humidification that improves personal comfort and industrial productivity in daily life. However, commercial nonwoven (NW) humidifying membranes show mediocre humidification capability owing to limited wicking capacity, low water absorption, and relatively less water evaporation. Herein, we report a biomimetic micro-/nanofibrous composite membrane with a highly aligned fibrous structure using a humidity-induced electrospinning technique for high-efficiency indoor humidification. Surface wettability and roughness are also tailored to achieve a high degree of superhydrophilicity by embedding hydrophilic silicon dioxide nanoparticles (SiO₂ NPs) into the fiber matrix. The synergistic effect of the highly aligned fibrous structure and surface wettability endows composite membranes with ultrafast water transport and evaporation. Strikingly, the composite membrane exhibits an outstanding wicking height of 19.5 cm, a superior water absorption of 497.7%, a fast evaporation rate of 0.34 mL h^-1, and a relatively low air pressure drop of 14.4 Pa, thereby achieving a remarkable humidification capacity of 514 mL h^-1 (57% higher than the commercial NW humidifying membrane). The successful synthesis of this biomimetic micro-/nanofibrous composite membrane provides new insights into the development of micro-/nanofibrous humidifying membranes for personal health and comfort as well as industrial production.

The Mechanisms of Antibacterial Activity of Magnesium Alloys with Extreme Wettability

In this study, we applied the method of nanosecond laser treatment for the fabrication of superhydrophobic and superhydrophilic magnesium-based surfaces with hierarchical roughness when the surface microrelief is evenly decorated by MgO nanoparticles. The comparative to the bare sample behavior of such surfaces with extreme wettability in contact with dispersions of bacteria cells Pseudomonas aeruginosa and Klebsiella pneumoniae in phosphate buffered saline (PBS) was studied. To characterize the bactericidal activity of magnesium samples with different wettability immersed into a bacterial dispersion, we determined the time variation of the planktonic bacterial titer in the dispersion. To explore the anti-bacterial mechanisms of the magnesium substrates, a set of experimental studies on the evolution of the magnesium ion concentration in liquid, pH of the dispersion medium, surface morphology, composition, and wettability was performed. The obtained data made it possible to reveal two mechanisms that, in combination, play a key role in the bacterial decontamination of the liquid. These are the alkalization of the dispersion medium and the collection of bacterial cells by microrods growing on the surface as a result of the interaction of magnesium with the components of the buffer solution.

High-Performance Joule Heating and Electromagnetic Shielding Properties of Anisotropic Carbon Scaffolds

Highly efficient electrical heaters along with excellent electromagnetic interference (EMI) shielding properties are urgently required for the progress of miniaturization electronics, artificial intelligence, and smart heating management setups. Herein, lignin removal, which comprises two efficient and versatile steps, followed by carbonization produces multifunctional carbon monoliths derived from natural wood. The obtained carbonized wood exhibits a high specific surface area (655.14 m²/g) and electrical (17.5 S/cm) and thermal conductivity (0.58 W/m·K), superhydrophilicity (contact angle of ∼0°), and excellent EMI shielding ability and Joule heating performance. The high electrical conductivity renders a low-voltage-actuated Joule heating performance and fascinating EMI shielding effectiveness of 55 dB, primarily resulting from the absorption mechanism. Moreover, regulation of the carbonized woods derived from the longitudinal to the radial direction enables transformation of hydrophilicity, strong thermal conductivity, and absorption-dominated EMI shielding to hydrophobicity, thermal insulation, and reflection-dominated EMI shielding. This is attributed to the unique anisotropic microstructure of carbon scaffolds. It is believed that these multifunctional carbon scaffolds can be used for intelligent electronics, EMI shielding, and thermal heating instruments.

Biodegradable Anti-Biofilm Fiber-Membrane Ureteral Stent Constructed with a Robust Biomimetic Superhydrophilic Polycationic Hydration Surface Exhibiting Synergetic Antibacterial and Antiprotein Properties

The biofouling of ureteral stents and subsequent urinary tract infections mainly come from the adsorption and adhesion of proteins and microorganisms and their ensuing proliferation. Although general polycationic surfaces in implants have good antibacterial activities, they suffer from limited durability due to severe protein and bacterial adsorption. Here, a biodegradable and anti-biofilm fiber-membrane structured ureteral stent (FMBUS) with synergetic contact-killing antibacterial activity and antiprotein adsorption is described. The stent is prepared by generating hyperbranched poly(amide-amine)-grafted polydopamine microparticles (≈300 nm) on the surface of fibers by in situ polymerization and Schiff base reactions. The biomimetic surface endows the FMBUS with a positive charge (+21.36 mV) and superhydrophilicity (water contact angle: 0°). As a result, the stents fulfilled the following functions: i) reduced attachment of host protein due to superhydrophilicity (Lysozyme: 92.1%; human serum albumin: 39.4%); ii) high bactericidal activities against contact pathogenic bacteria (contact-killing rate: 99.9999% for both E. coli and S. aureus; antiadhesion rate: 99.2% for E. coli and 99.9999% for S. aureus); iii) biocompatibility in vitro (relative growth rate of L929: >90% on day 3) and in vivo; and iv) gradient biodegradability to avoid a second surgery of stent extraction 1-2 weeks after implantation.

Sphagnum Inspired g-C3 N4 Nano/Microspheres with Smaller Bandgap in Heterojunction Membranes for Sunlight-Driven Water Purification

Membrane separation is recognized as one of the most effective strategies to treat the complicated wastewater system for economic development. However, serious membrane fouling has restricted its further application. Inspired by sphagnum, a 0D/2D heterojunction composite membrane is engineered by depositing graphitic carbon nitride nano/microspheres (CNMS) with plentiful wrinkles onto the polyacrylic acid functionalized carbon nanotubes (CNTs-PAA) membrane through hydrogen bond force. Through coupling unique structure and chemistry properties, the CNTs-PAA/CNMS heterojunction membrane presents superhydrophilicity and underwater superoleophobicity. Furthermore, thanks to the J-type aggregates during the solvothermal process, it is provided with a smaller bandgap (1.77 eV) than the traditional graphitic carbon nitride (g-C₃ N₄ ) sheets-based membranes (2.4-2.8 eV). This feature endows the CNTs-PAA/CNMS membrane with superior visible-light-driven self-cleaning ability, which can maintain its excellent emulsion separation (with a maximum flux of 5557 ± 331 L m^-2 h^-1 bar^-1 and an efficiency of 98.5 ± 0.6%), photocatalytic degradation (with an efficiency of 99.7 ± 0.2%), and antibacterial (with an efficiency of ≈100%) ability even after cyclic experimental processes. The excellent self-cleaning performance of this all-in-one membrane represents its potential value for water purification.

Antireflective and Superhydrophilic Structure on Graphite Written by Femtosecond Laser

Antireflection and superhydrophilicity performance are desirable for improving the properties of electronic devices. Here, we experimentally provide a strategy of femtosecond laser preparation to create micro-nanostructures on the graphite surface in an air environment. The modified graphite surface is covered with abundant micro-nano structures, and its average reflectance is measured to be 2.7% in the ultraviolet, visible and near-infrared regions (250 to 2250 nm). The wettability transformation of the surface from hydrophilicity to superhydrophilicity is realized. Besides, graphene oxide (GO) and graphene are proved to be formed on the sample surface. This micro-nanostructuring method, which demonstrates features of high efficiency, high controllability, and hazardous substances zero discharge, exhibits the application for functional surface.

Self-Locked and Self-Cleaning Membranes for Efficient Removal of Insoluble and Soluble Organic Pollutants from Water

A feasible and efficient membrane for long-term treatment of complex oily wastewater is especially in demand, but its development still remains a challenge because of serious membrane fouling and incomplete/destructive reclamation methods. Herein, an interpenetrating TiO₂ nanorod-decorated membrane with self-locked and self-cleaning properties is rationally fabricated via coaxial electrospinning and hydrothermal synthesis. The self-locked membrane shows full reinstatement of the original state and exhibits satisfactory mechanical strength, superhydrophilicity, underwater superoleophobicity, and robust solvent resistance, which endow the membrane with successful separation for 16 types of highly emulsified oil-in-water emulsions (e.g., surfactant-free; anionic, cationic, and nonionic surfactant-stabilized). Moreover, successful sequencing treatment of soluble organic emulsions using the separated "bait-hook-destroy" strategy indicates that the pristine membrane can be used to treat multipollutant wastewater with various limits. Most importantly, the fouled membrane can easily be reinstated by light irradiation without reduction of both mechanical strength and separation performance. As a proof of concept, the as-synthesized membrane shows an ultrahigh flux over 5000 L m^-2 h^-1 with a removal efficiency of >99.92%. The present development would provide a highly efficient strategy for the fabrication of an inorganic-organic revivable electrospinning membrane for various applications.

Programming Multiphase Media Superwetting States in the Oil-Water-Air System: Evolutions in Hydrophobic-Hydrophilic Surface Heterogeneous Chemistry

Studies toward tailoring macroscopic extreme wetting behaviors on a certain well-defined surface in multiphase media are significant but still at an infant stage. Herein, superantiwetting evolutions in the oil-water-air system can be programmed from single to quadruple superrepellence by controlling the surface hydrophobic-hydrophilic heterogeneous chemistry. Ammonia vapor exposure makes the realization of challenging superhydrophilicity-superoleophobicity possible in air medium, causing the transition from quadruple to triple superantiwetting states in the oil-water-air system. Upon UV illumination, only single superrepellence-underwater superoleophobicity is maintained on titanium dioxide (TiO₂, P25)-based coatings. A reversible transition between underoil superhydrophilicity and superhydrophobicity via an alternating UV irradiation and heating process leads to a switching between "water-absorbing" and "size-sieving" effects in water-in-oil emulsion separation. A comparative study for investigating two such effects in emulsion separation is further investigated. The current conceptual insights not only extend superwetting states to multiphase media, but can also deepen the understanding of the relationship between macroscopic extreme wetting behaviors and surface chemistry.

Effects of Plasma Treatment on the Bioactivity of Alkali-Treated Ceria-Stabilised Zirconia/Alumina Nanocomposite (NANOZR)

Zirconia ceramics such as ceria-stabilized zirconia/alumina nanocomposites (nano-ZR) are applied as implant materials due to their excellent mechanical properties. However, surface treatment is required to obtain sufficient biocompatibility. In the present study, we explored the material surface functionalization and assessed the initial adhesion of rat bone marrow mesenchymal stem cells, their osteogenic differentiation, and production of hard tissue, on plasma-treated alkali-modified nano-ZR. Superhydrophilicity was observed on the plasma-treated surface of alkali-treated nano-ZR along with hydroxide formation and reduced surface carbon. A decreased contact angle was also observed as nano-ZR attained an appropriate wettability index. Treated samples showed higher in vitro bovine serum albumin (BSA) adsorption, initial adhesion of bone marrow and endothelial vascular cells, high alkaline phosphatase activity, and increased expression of bone differentiation-related factors. Furthermore, the in vivo performance of treated nano-ZR was evaluated by implantation in the femur of male Sprague-Dawley rats. The results showed that the amount of bone formed after the plasma treatment of alkali-modified nano-ZR was higher than that of untreated nano-ZR. Thus, induction of superhydrophilicity in nano-ZR via atmospheric pressure plasma treatment affects bone marrow and vascular cell adhesion and promotes bone formation without altering other surface properties.

Relationship and Interconversion Between Superhydrophilicity, Underwater Superoleophilicity, Underwater Superaerophilicity, Superhydrophobicity, Underwater Superoleophobicity, and Underwater Superaerophobicity: A Mini-Review

Superwetting surfaces have received increasing attention because of their rich practical applications. Although various superwettabilities are independently achieved, the relationship between those superwettabilities is still not well-clarified. In this mini-review, we show that superhydrophilicity, underwater superoleophilicity, underwater superaerophilicity, superhydrophobicity, underwater superoleophobicity, and underwater superaerophobicity can be obtained on a same structured surface by the combination of hierarchical surface microstructures and proper chemistry. The relationship and interconversion between the above-mentioned different superwettabilities are also well-discussed. We believe that the current discussion and clarification of the relationship and interconversion between different superwettabilities has important significance in the design, fabrication, and applications of various superwetting materials.

Superwicking on Nanoporous Micropillared Surfaces

Engineering surfaces with excellent wicking properties is of critical importance to a wide range of applications. Here, we report a facile method to create superhydrophilic nanoporous micropillared surfaces of silicon and their applicability to superwicking. Nanopores with a good control of the pore depth are realized over the entire surface of three-dimensional micropillar structures by electrochemical etching in hydrofluoric acid. After rinsing in hydrogen peroxide, the nanoporous micropillared surface shows superhydrophilicity with the superwicking effect. The entire spreading process of a water droplet on the superhydrophilic nanoporous micropillared surface is completed in less than 50 ms, with an average velocity of 91.2 mm/s, which is significantly faster than the other wicking surfaces reported. Owing to the presence of nanopores on the micropillar array, the wicking dynamics is distinct from the surfaces decorated only by micropillar arrays. The spreading dynamics of a water droplet shows two distinct processes simultaneously, including the capillary penetration between micropillars and the capillary imbibition into the nanopore's interior. The wicking dynamics can be described by the two stages separated by the time when the contact line starts to recede. The transition between the two wicking regimes is due to the increasing effect of the imbibition of the bulk droplet by the nanopores. While a similar transition of the wicking dynamics is shown on the surfaces with different pore depths, the nanopore structure with a greater depth causes a greater amount of imbibition to slow down the spreading and promote superwicking.

Universal Antifogging and Antimicrobial Thin Coating Based on Dopamine-Containing Glycopolymers

A novel strategy for preparing universal antifogging and antimicrobial coating is reported by the means of one-step coating and Ag nanoparticle (AgNP) formation in situ. A series of hydrophilic glycopolymers including poly(N-3,4-dihydroxybenzenethyl methacrylamide-co-2-deoxy-2-(methacrylamido)glucopyranose) (P1s) and poly(N-3,4-dihydroxybenzenethyl methacrylamide-co-methacrylic acid-co-2-deoxy-2-(methacrylamido)glucopyranose) (P2s) were synthesized by sunlight-induced reverse addition-fragmentation chain transfer (RAFT) polymerization. With the ability to strongly immobilize onto organic and inorganic surfaces (i.e., glass slide, silicon wafer, and polycarbonate) via catechol groups, P1s are very convenient to form superhydrophilic and transparent thin coatings, which result in a unique antifogging property. Additionally, the antimicrobial property is realized by in situ AgNPs forming P2 coatings, facilitated by the presence of carboxyl groups and catechol groups in the polymer chain, rendering it superior antimicrobial activity against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus microorganisms. This antifogging and antimicrobial thin coating shows strong prospects in medical and optical devices, with the extra benefits of avoiding potential pathogen infection in vitro or while in storage.

Zwitterionic Polymer-Grafted Superhydrophilic and Superoleophobic Silk Fabrics for Anti-Oil Applications

A highly anti-oil fabric membrane is synthesized by surface grafting of zwitterionic poly(sulfobetaine methacrylate) (PSBMA) onto the fabric surface. The fabric membrane is first enzymatically modified to create more reactive amine groups on the surface. A surface-initiated atom transfer radical polymerization (SI-ATRP) reaction is then performed to modify the fabric membrane surface with a dense PSBMA brush layer. Surface characterization indicates that the brush-grafted fabric membrane exhibits increased surface roughness and improved superhydrophilicity. The PSBMA-modified silk fabrics show a very large contact angle for oil droplets in water, and have excellent oil resistance in air and in water-oil mixtures.

Design of Chemical Surface Treatment for Laser-Textured Metal Alloys to Achieve Extreme Wetting Behavior

Extreme wetting activities of laser-textured metal alloys have received significant interest due to their superior performance in a wide range of commercial applications and fundamental research studies. Fundamentally, extreme wettability of structured metal alloys depends on both the surface structure and surface chemistry. However, compared with the generation of physical topology on the surface, the role of surface chemistry is less explored for the laser texturing processes of metal alloys to tune the wettability. This work introduces a systematic design approach to modify the surface chemistry of laser textured metal alloys to achieve various extreme wettabilities, including superhydrophobicity/superoleophobicity, superhydrophilicity/superoleophilicity, and coexistence of superoleophobicity and superhydrophilicity. Microscale trenches are first created on the aluminum alloy 6061 surfaces by nanosecond pulse laser surface texturing. Subsequently, the textured surface is immersion-treated in several chemical solutions to attach target functional groups on the surface to achieve the final extreme wettability. Anchoring fluorinated groups (-CF₂- and -CF₃) with very low dispersive and nondispersive surface energy leads to superoleophobicity and superhydrophobicity, resulting in repelling both water and diiodomethane. Attachment of the polar nitrile (-C≡N) group with very high nondispersive and high dispersive surface energy achieves superhydrophilicity and superoleophilicity by drawing water and diiodomethane molecules in the laser-textured capillaries. At last, anchoring fluorinated groups (-CF₂- and -CF₃) and polar sodium carboxylate (-COONa) together leads to very low dispersive and very high nondispersive surface energy components. It results in the coexistence of superoleophobicity and superhydrophilicity, where the treated surface attracts water but repels diiodomethane.

Design of Chemical Surface Treatment for Laser-Textured Metal Alloys to Achieve Extreme Wetting Behavior

Extreme wetting activities of laser-textured metal alloys have received significant interest due to their superior performance in a wide range of commercial applications and fundamental research studies. Fundamentally, extreme wettability of structured metal alloys depends on both the surface structure and surface chemistry. However, compared with the generation of physical topology on the surface, the role of surface chemistry is less explored for the laser texturing processes of metal alloys to tune the wettability. This work introduces a systematic design approach to modify the surface chemistry of laser textured metal alloys to achieve various extreme wettabilities, including superhydrophobicity/superoleophobicity, superhydrophilicity/superoleophilicity, and coexistence of superoleophobicity and superhydrophilicity. Microscale trenches are first created on the aluminum alloy 6061 surfaces by nanosecond pulse laser surface texturing. Subsequently, the textured surface is immersion-treated in several chemical solutions to attach target functional groups on the surface to achieve the final extreme wettability. Anchoring fluorinated groups (-CF₂- and -CF₃) with very low dispersive and nondispersive surface energy leads to superoleophobicity and superhydrophobicity, resulting in repelling both water and diiodomethane. Attachment of the polar nitrile (-C≡N) group with very high nondispersive and high dispersive surface energy achieves superhydrophilicity and superoleophilicity by drawing water and diiodomethane molecules in the laser-textured capillaries. At last, anchoring fluorinated groups (-CF₂- and -CF₃) and polar sodium carboxylate (-COONa) together leads to very low dispersive and very high nondispersive surface energy components. It results in the coexistence of superoleophobicity and superhydrophilicity, where the treated surface attracts water but repels diiodomethane.

Multifunctional Antimicrobial Nanofiber Dressings Containing ε-Polylysine for the Eradication of Bacterial Bioburden and Promotion of Wound Healing in Critically Colonized Wounds

Bacterial colonization of acute and chronic wounds is often associated with delayed wound healing and prolonged hospitalization. The rise of multi-drug resistant bacteria and the poor biocompatibility of topical antimicrobials warrant safe and effective antimicrobials. Antimicrobial agents that target microbial membranes without interfering with the mammalian cell proliferation and migration hold great promise in the treatment of traumatic wounds. This article reports the utility of superhydrophilic electrospun gelatin nanofiber dressings (NFDs) containing a broad-spectrum antimicrobial polymer, ε-polylysine (εPL), crosslinked by polydopamine (pDA) for treating second-degree burns. In a porcine model of partial thickness burns, NFDs promoted wound closure and reduced hypertrophic scarring compared to untreated burns. Analysis of NFDs in contact with the burns indicated that the dressings trap early colonizers and elicit bactericidal activity, thus creating a sterile wound bed for fibroblasts migration and re-epithelialization. In support of these observations, in porcine models of Pseudomonas aeruginosa and Staphylococcus aureus colonized partial thickness burns, NFDs decreased bacterial bioburden and promoted wound closure and re-epithelialization. NFDs displayed superior clinical outcome than standard-of-care silver dressings. The excellent biocompatibility and antimicrobial efficacy of the newly developed dressings in pre-clinical models demonstrate its potential for clinical use to manage infected wounds without compromising tissue regeneration.

Flame Synthesis of Superhydrophilic Carbon Nanotubes/Ni Foam Decorated with Fe2O3 Nanoparticles for Water Purification via Solar Steam Generation

Solar-driven water evaporation has been proposed as a renewable and sustainable strategy for the generation of clean water from seawater or wastewater. To enable such technologies, development of photothermal materials that enable efficient solar steam generation is essential. The current challenge is to manufacture such photothermal materials cost-effectively and at scale. Furthermore, the photothermal materials should be strongly hydrophilic and environmentally stable. Herein, we demonstrate facile and scalable fabrication of carbon nanotube (CNT)-based photothermal nanocomposite foam by igniting an ethanol solution of ferric acetylacetonate [Fe(acac)₃] absorbed within nickel (Ni) foam under ambient conditions. The Fe(acac)₃ precursor provides carbon and the zero-valent iron catalyst for growing CNTs on the Ni foam, while ethanol facilitates the dispersion of Fe(acac)₃ on the Ni foam and supplies heat energy for the growth of CNTs by its burning. A forest of dense and uniform CNTs decorated with Fe₂O₃ nanoparticles is generated within seconds. The resultant Fe₂O₃/CNT/Ni nanocomposite foam exhibits "superhydrophilicity" and high light absorption capacity, ensuring rapid transport and fast evaporation of water within the entire foam. Efficient light-to-heat conversion causes the surface temperature of the foam to reach ∼83.1 °C under 1 sun irradiation. The average water evaporation rates of such foam are as high as ∼1.48 and ∼4.27 kg m^-2 h^-1 with light-to-heat conversion efficiencies of ∼81.3 and ∼93.8% under 1 sun and 3 sun irradiation, respectively. Moreover, the versatile and scalable combustion synthesis strategy presented here can be realized on various substrates, exhibiting high adaptability for different applications.

Micro-/Nanostructured Interface for Liquid Manipulation and Its Applications

Understanding the relationship between liquid manipulation and micro-/nanostructured interfaces has gained much attention due to the wide potential applications in many fields, such as chemical and biomedical assays, environmental protection, industry, and even daily life. Much work has been done to construct various materials with interfacial liquid manipulation abilities, leading to a range of interesting applications. Herein, different fabrication methods from the top-down approach to the bottom-up approach and subsequent surface modifications of micro-/nanostructured interfaces are first introduced. Then, interactions between the surface and liquid, including liquid wetting, liquid transportation, and a number of corresponding models, together with the definition of hydrophilic/hydrophobic, oleophilic/olephobic, the definition and mechanism of superwetting, including superhydrophobicity, superhydrophilicity, and superoleophobicity, are presented. The micro-/nanostructured interface, with major applications in self-cleaning, antifogging, anti-icing, anticorrosion, drag-reduction, oil-water separation, water collection, droplet (micro)array, and surface-directed liquid transport, is summarized, and the mechanisms underlying each application are discussed. Finally, the remaining challenges and future perspectives in this area are included.

Covalently Modulated and Transiently Visible Writing: Rational Association of Two Extremes of Water Wettabilities

Anticounterfeiting measures are of ever-increasing importance in society, e.g., for securing the authenticity of and the proof of origin for medical drugs. Here, an arms race of counterfeiters and valid manufacturers is taking place, resulting in the need of hard-to-forget, yet easy-to-read out marks. Anticounterfeiting measures based on micropatterns-while being attractive for their need in not widely available printing methods while still being easily read out with fairly common basic optical equipment-are often limited by being too easy to be destroyed by wear or handling. Here, nature-inspired wettability is rationally exploited for developing an unprecedented anticounterfeiting method, where hidden information can be only identified under direct exposures to an aqueous phase or mist and disappears again on air-drying the interface. A chemically reactive and hierarchically featured dip coating, capable of spatially selective covalent modification with primary amine containing small molecules, is developed for abrasion-tolerant patterning interfaces with two extremes of water wettabilities, i.e., superhydrophilicity and superhydrophobicity. Arbitrary handwriting with glucamine followed by chemical modification with octadecylamine, provided "invisible" text on the synthesized interface. The glucamine-treated region selectively becomes optically transparent and superhydrophilic due to rapid infiltration of the aqueous phase on exposure to liquid water or mist. The remaining interface remains opaque and superhydrophobic due to metastable entrapment of air. The hidden text became transiently and reversibly visible by the naked eye under exposure to liquid water/mist. Furthermore, microchannel-cantilever spotting (μCS) is adopted for demonstrating well-defined chemical patterning on the microscale. These patterns are at the same time highly resistant against wear and scratching because of the bulk functionalization, retaining the wetting properties (and thus pattern readout) even on serious abrasion. Such a simple synthesis of spatially controlled, direct, and covalently modulated wettability could be useful for various applied and fundamental contexts.

Femtosecond-Laser-Produced Underwater "Superpolymphobic" Nanorippled Surfaces: Repelling Liquid Polymers in Water for Applications of Controlling Polymer Shape and Adhesion

A femtosecond (fs)-laser-processed surface that repels liquid polymer in water is reported in this paper. We define this phenomenon as the "superpolymphobicity". Three-level microstructures (including microgrooves, micromountains/microholes between the microgrooves, and nanoripples on the whole surface) were directly created on the stainless steel surface via fs laser processing. A liquid polydimethylsiloxane (PDMS) droplet on the textured surface had the contact angle of 156 ± 3° and contact angle hysteresis less than 4° in water, indicating excellent underwater superpolymphobicity of the fs-laser-induced hierarchical microstructures. The contact between the resultant superhydrophilic hierarchical microstructures and the submerged liquid PDMS droplet is verified at the underwater Cassie state. The underwater superpolymphobicity enables to design the shape of cured PDMS and selectively avoid the adhesion at the PDMS/substrate interface, different from the previously reported superwettabilities. As the examples, the microlens array and microfluidics system were prepared based on the laser-induced underwater superpolymphobic microstructures.

A Superhydrophilic Aluminum Surface with Fast Water Evaporation Based on Anodic Alumina Bundle Structures via Anodizing in Pyrophosphoric Acid

A superhydrophilic aluminum surface with fast water evaporation based on nanostructured aluminum oxide was fabricated via anodizing in pyrophosphoric acid. Anodizing aluminum in pyrophosphoric acid caused the successive formation of a barrier oxide film, a porous oxide film, pyramidal bundle structures with alumina nanofibers, and completely bent nanofibers. During the water contact angle measurements at 1 s after the water droplet was placed on the anodized surface, the contact angle rapidly decreased to less than 10°, and superhydrophilic behavior with the lowest contact angle measuring 2.0° was exhibited on the surface covered with the pyramidal bundle structures. As the measurement time of the contact angle decreased to 200-33 ms after the water placement, although the contact angle slightly increased in the initial stage due to the formation of porous alumina, at 33 ms after the water placement, the contact angle was 9.8°, indicating that superhydrophilicity with fast water evaporation was successfully obtained on the surface covered with the pyramidal bundle structures. We found that the shape of the pyramidal bundle structures was maintained in water without separation by in situ high-speed atomic force microscopy measurements.

Electrostatic Assembly of a Titanium Dioxide@Hydrophilic Poly(phenylene sulfide) Porous Membrane with Enhanced Wetting Selectivity for Separation of Strongly Corrosive Oil-Water Emulsions

The efficient treatment of oil-water emulsions in extreme environments, such as strongly acidic and alkaline media, remains a widespread concern. Poly(phenylene sulfide) (PPS)-based porous membranes with excellent resistance to chemicals and solvents are promising for settling this challenge. However, the limited hydrophilicity and the poor hydrated ability of the hydrophilic PPS (h-PPS) membranes reported in the literature prevents them from separating oil-water emulsions with high efficiency, large fluxes, and good antifouling performances. In this study, a firm rough TiO₂ layer is constructed on a h-PPS membrane via electrostatic assembly to improve the surface hydrophilization. The introduction of the TiO₂ layer increases the wetting selectivity and decreases the oil adhesion, which makes it capable to efficiently treat oil-in-water emulsions (efficiency > 98%). Most importantly, the underwater critical oil intrusion pressure almost doubled after the incorporation of the TiO₂ layer, which allows the membrane to withstand pressurized filtration, achieving a high flux of ∼4000 L m^-2 h^-1. This is more than 2 orders of magnitude larger than the flux of the reported h-PPS. Furthermore, the TiO₂@h-PPS membrane displays long-term stability in separating oil-water emulsions in strong acid and strong alkali, showing a promising prospect for the treatment of strongly corrosive emulsions.

Efficient Oil/Water Separation Membrane Derived from Super-Flexible and Superhydrophilic Core-Shell Organic/Inorganic Nanofibrous Architectures

To address the worldwide oil and water separation issue, a novel approach was inspired by natural phenomena to synthesize superhydrophilic and underwater superoleophobic organic/inorganic nanofibrous membranes via a scale up fabrication approach. The synthesized membranes possess a delicate organic core of PVDF-HFP and an inorganic shell of a CuO nanosheet structure, which endows super-flexible properties owing to the merits of PVDF-HFP backbones, and superhydrophilic functions contributed by the extremely rough surface of a CuO nanosheet anchored on flexible PVDF-HFP. Such an organic core and inorganic shell architecture not only functionalizes membrane performance in terms of antifouling, high flux, and low energy consumption, but also extends the lifespan by enhancing its mechanical strength and alkaline resistance to broaden its applicability. The resultant membrane exhibits good oil/water separation efficiency higher than 99.7%, as well as excellent anti-fouling properties for various oil/water mixtures. Considering the intrinsic structural innovation and its integrated advantages, this core-shell nanofibrous membrane is believed to be promising for oil/water separation, and this facile approach is also easy for scaled up manufacturing of functional organic/inorganic nanofibrous membranes with insightful benefits for industrial wastewater treatment, sensors, energy production, and many other related areas.

TiO2 thin films by ultrasonic spray pyrolysis as photocatalytic material for air purification

In this study, we showed that the TiO2 thin films deposited onto window glass are practicable for air purification and self-cleaning applications. TiO2 films were deposited onto window glass by ultrasonic spray pyrolysis method. Different deposition temperatures were used in the range of 250-450°C. The structural, morphological, optical properties and surface chemical composition were investigated to understand probable factors affecting photocatalytic performance and wettability of the TiO2 thin films. The TiO2 thin films were smooth, compacted and adhered adequately on the substrate with a thickness in the range of 100-240 nm. X-ray diffraction patterns revealed that all the TiO2 thin films consisted of anatase phase structure with the mean crystallite size in the range of 13-35 nm. The optical measurements showed that the deposited films were highly transparent (approx. 85%). The wettability test results showed that the TiO2 thin films sprayed at 350°C and 450°C and annealed at 500°C for 1 h were superhydrophilic. The photocatalytic activity of the films was tested for the degradation of methyl tert-butyl ether (MTBE) in multi-section plug-flow reactor. The TiO2 film deposited at 350°C exhibited the highest amount of conversion of MTBE, approximately 80%.

Novel Polymer Material for Efficiently Removing Methylene Blue, Cu(II) and Emulsified Oil Droplets from Water Simultaneously

The pollution of water resources has become a worldwide concern. The primary pollutants including insoluble oil, toxic dyes, and heavy metal ions. Herein, we report a polymer adsorbent, named SPCT, to remove the above three contaminants from water simultaneously. The preparation process of SPCT contains two steps. Firstly, a hydrogel composed of sulfonated phenolic resin (SMP) and polyethyleneimine (PEI) was synthesized using glutaraldehyde (GA) as the crosslinking agent, and the product was named SPG. Then SPCT was prepared by the reaction between SPG and citric acid (CA) at 170 °C. SPCT exhibited an excellent performance for the removal of methylene blue (MB) and Cu(II) from aqueous solution. For a solution with a pollutant concentration of 50 mg L⁻¹, a removal efficiency of above 90% could be obtained with a SPCT dosage of 0.2 g L⁻¹ for MB, or a SPCT dosage of 0.5 g L⁻¹ for Cu(II), respectively. SPCT also presented an interesting wettability. In air, it was both superhydrophilic and superoleophilic, and it was superoleophobic underwater. Therefore, SPCT could successfully separate oil-in-water emulsion with high separation efficiency and resistance to oil fouling. Additionally, SPCT was easily regenerated by using dilute HCl solution as an eluent. The outstanding performance of SPCT and the efficient, cost-effective preparation process highlight its potential for practical applications.

Underwater Superaerophobic and Superaerophilic Nanoneedles-Structured Meshes for Water/Bubbles Separation: Removing or Collecting Gas Bubbles in Water

Water/bubbles separation has great practical significance, which can avoid the harm caused by underwater bubbles or cleverly collect useful gas bubbles in water. Here, a Cu(OH)2-nanoneedles-structured rough copper mesh is fabricated by a one-step chemical reaction. The original rough mesh shows superhydrophilicity in air and superaerophobicity in water. The underwater superaerophobic mesh has great anti/removing-bubbles ability in water. In contrast, the rough mesh switches to superhydrophobicity in air and superaerophilicity in water after further being modified with fluoroalkylsilane. The underwater superaerophilic mesh can absorb bubbles and allow bubbles to pass through the mesh. Based on the superhydrophilic/superaerophobic mesh and the superhydrophobic/superaerophilic mesh, a strategy to remove gas bubbles from the water pipe is proposed, and an in-water bubbles-collection device is also designed. It is believed that these two kinds of mesh will have more applications in controlling the behavior of underwater bubbles.

A Simple, Green Method to Fabricate Composite Membranes for Effective Oil-in-Water Emulsion Separation

Most factories discharge untreated wastewater to reduce costs, causing serious environmental problems. Low-cost, biological, environmentally friendly and highly effective materials for the separation of emulsified oil/water mixtures are thus in great demand. In this study, a simple, green method was developed for separating oil-in-water emulsions. A corn straw powder (CSP)-nylon 6,6 membrane (CSPNM) was fabricated by a phase inversion process without any further chemical modification. The CSPNM showed superhydrophilic and underwater superoleophobic properties and could be used for the separation of oil-in-water emulsion with high separation efficiency and flux. The CSPNM maintained excellent separation ability after 20 cycles of separation with an oil rejection >99.60%, and the oil rejection and flux have no obvious change with an increasing number of cycles, suggesting a good antifouling property and the structural stability of CSPNM. In addition, the CSPNM exhibited excellent thermal and chemical stability under harsh conditions of high temperature and varying pH.

Under-Oil Switchable Superhydrophobicity to Superhydrophilicity Transition on TiO2 Nanotube Arrays

Recently, smart interfacial materials that can reversibly transit between the superhydrophobicity and superhydrophilicity have aroused much attention. However, all present performances happen in air, and to realize such a smart transition in complex environments, such as oil, is still a challenge. Herein, TiO₂ nanotube arrays with switchable transition between the superhydrophobicity and superhydrophilicity in oil are reported. The switching can be observed by alternation of UV irradiation and heating process, and the smart controllability can be ascribed to the cooperative effect between the surface nanostructures and the chemical composition variation. By using the controllable wetting performances, some applications such as under-oil droplet-based microreaction and water-removal from oil were demonstrated on our surface. This paper reports a surface with smart water wettability in oil, which could start some fresh ideas for wetting control on interfacial materials.

TiO2 anatase nanorods with non-equilibrium crystallographic {001} facets and their coatings exhibiting high photo-oxidation of NO gas

Development of highly active photocatalysts is mandatory for more widespread application of this alternative environmental technology. Synthesis of photocatalysts, such as anatase TiO₂, with more reactive, non-equilibrium, crystallographic facets is theoretically justified by a more efficient interfacial charge transfer to reactive adsorbed species, increasing quantum efficiency of photocatalyst. Air and vacuum calcinations of protonated trititanate nanotubes lead to their transformation to anatase nanorods. The nanorods synthesized by air calcination demonstrate photo-oxidation of NO gas more than three times superior to the one presented by the benchmark P-25 photocatalyst. This performance has been explained in terms of 50% higher specific surface area and, more importantly, through the predominance of more reactive, non-equilibrium, {001} crystallographic facets of the anatase nanorods. These facets present a high density of undercoordinated Ti cations, which favors adsorption of reactant species, and strained Ti-O-Ti bonds, leading to more efficient photo-oxidation reactions. Reduced Ti species, such as Ti³⁺, were not observed in the as-obtained nanorods, while reactive adsorbed molecules are scarce on the nanorods obtained through vacuum calcination. Dip-coating of TiO₂ anatase nanorods (air calcined) over soda-lime glass plates was used to prepare visible light transparent, superhydrophilic and highly adherent photocatalytic coatings with homogenously distributed nanopores.

Bio-Inspired Polymeric Structures with Special Wettability and Their Applications: An Overview

It is not unusual for humans to be inspired by natural phenomena to develop new advanced materials; such materials are called bio-inspired materials. Interest in bio-inspired polymeric superhydrophilic, superhydrophobic, and superoleophobic materials has substantially increased over the last few decades, as has improvement in the related technologies. This review reports the latest developments in bio-inspired polymeric structures with desired wettability that have occurred by mimicking the structures of lotus leaf, rose petals, and the wings and shells of various creatures. The intrinsic role of surface chemistry and structure on delivering superhydrophilicity, superhydrophobicity, and superoleophobicity has been extensively explored. Typical polymers, commonly used structures, and techniques involved in developing bio-inspired surfaces with desired wettability are discussed. Additionally, the latest applications of bio-inspired structures with desired wettability in human activities are also introduced.

Superlyophilic Interfaces and Their Applications

Superlyophilic interfaces denote interfaces displaying strong affinity to diverse liquids, including superhydrophilic, superoleophilic, and superamphiphilic interfaces. When coming in contact with these interfaces, water or oil droplets tend to spread completely with contact angles close to 0°, presenting versatile applications including self-cleaning, antifogging, controllable liquid transport, liquid separation, and so forth. Inspired by nature, scientists have developed various kinds of artificial superlyophilic (SLPL) interfaces in the past decades. In terms of dimensional characteristics, the artificial SLPL interfaces can be divided into four categories: i) 0D particles, whose dispersibility or catalytic performance can be notably enhanced by superlyophilicity; ii) 1D micro-/nanofibers or nanotubes/channels, which can efficiently transfer liquids with SLPL interfaces; iii) 2D flat SLPL interfaces, on which different functional molecules can be deposited uniformly, forming ultrathin and smooth films; and iv) 3D structures, which can be obtained by either constructing 0D, 1D, or 2D SLPL materials separately or directly fabricating random SLPL frameworks, and can always be used as functional coatings or bulk materials. Here, natural and artificial SLPL interfaces are briefly introduced, followed by a short discussion of the limit between lyophilicity and lyophobicity, and then a snapshot of methods to generate SLPL interfaces is given. Specific focus is placed on recent achievements of constructing SLPL interfaces from zero to three dimensions. Following that, broad applications of SLPL interfaces in commercial areas will be introduced. Finally, a short summary and outlook for future challenges in this field is presented.