Target Affinity and Structural Analysis for a Selection of Norovirus Aptamers

Aptamers, single-stranded oligonucleotides that specifically bind a molecule with high affinity, are used as ligands in analytical and therapeutic applications. For the foodborne pathogen norovirus, multiple aptamers exist but have not been thoroughly characterized. Consequently, there is little research on aptamer-mediated assay development. This study characterized seven previously described norovirus aptamers for target affinity, structure, and potential use in extraction and detection assays. Norovirus-aptamer affinities were determined by filter retention assays using norovirus genotype (G) I.1, GI.7, GII.3, GII.4 New Orleans and GII.4 Sydney virus-like particles. Of the seven aptamers characterized, equilibrium dissociation constants for GI.7, GII.3, GII.4 New Orleans and GII.4 Sydney ranged from 71 ± 38 to 1777 ± 1021 nM. Four aptamers exhibited affinity to norovirus GII.4 strains; three aptamers additionally exhibited affinity toward GII.3 and GI.7. Aptamer affinity towards GI.1 was not observed. Aptamer structure analysis by circular dichroism (CD) spectroscopy showed that six aptamers exhibit B-DNA structure, and one aptamer displays parallel/antiparallel G-quadruplex hybrid structure. CD studies also showed that biotinylated aptamer structures were unchanged from non-biotinylated aptamers. Finally, norovirus aptamer assay feasibility was demonstrated in dot-blot and pull-down assays. This characterization of existing aptamers provides a knowledge base for future aptamer-based norovirus detection and extraction assay development and aptamer modification.

Advances and Challenges in Small-Molecule DNA Aptamer Isolation, Characterization, and Sensor Development

Aptamers are short oligonucleotides isolated in vitro from randomized libraries that can bind to specific molecules with high affinity, and offer a number of advantages relative to antibodies as biorecognition elements in biosensors. However, it remains difficult and labor-intensive to develop aptamer-based sensors for small-molecule detection. Here, we review the challenges and advances in the isolation and characterization of small-molecule-binding DNA aptamers and their use in sensors. First, we discuss in vitro methodologies for the isolation of aptamers, and provide guidance on selecting the appropriate strategy for generating aptamers with optimal binding properties for a given application. We next examine techniques for characterizing aptamer-target binding and structure. Afterwards, we discuss various small-molecule sensing platforms based on original or engineered aptamers, and their detection applications. Finally, we conclude with a general workflow to develop aptamer-based small-molecule sensors for real-world applications.

Advances in aptamer screening and aptasensors' detection of heavy metal ions

Heavy metal pollution has become more and more serious with industrial development and resource exploitation. Because heavy metal ions are difficult to be biodegraded, they accumulate in the human body and cause serious threat to human health. However, the conventional methods to detect heavy metal ions are more strictly to the requirements by detection equipment, sample pretreatment, experimental environment, etc. Aptasensor has the advantages of strong specificity, high sensitivity and simple preparation to detect small molecules, which provides a new direction platform in the detection of heavy metal ions. This paper reviews the selection of aptamers as target for heavy metal ions since the 21th century and aptasensors application for detection of heavy metal ions that were reported in the past five years. Firstly, the selection methods for aptamers with high specificity and high affinity are introduced. Construction methods and research progress on sensor based aptamers as recognition element are also introduced systematically. Finally, the challenges and future opportunities of aptasensors in detecting heavy metal ions are discussed.

A human epidermal growth factor receptor 3/heregulin interaction inhibitor aptamer discovered using SELEX

The interaction of human epidermal growth factor receptor 3 (HER3) and heregulin (HRG) is involved in resistance to human epidermal growth factor receptor 2 (HER2)-targeted cancer treatment, such as therapies using anti-HER2 monoclonal antibody. Therefore, inhibition of the HER3/HRG interaction is potentially valuable therapeutic target for cancer treatment. In this study, we used in vitro selection, also known as systematic evolution of ligands by exponential enrichment (SELEX) against the extracellular domain of human HER3, and discovered a novel RNA aptamer. Pull-down and bio-layer interferometry assays showed that RNA aptamer discovered specifically bound to HER3 with a dissociation constant (K_D) of 700 nM. Pull-down assays using chemiluminescence detection also revealed that the HER3-binding RNA aptamer inhibited interactions between HER3 and human HRG. These results indicated that the novel HER3-binding RNA aptamer has potential to be used as basic tool in a range of applications involving HER3/HRG interactions, including research, therapeutic, and diagnostic applications.

Application of Aptamer-Based Assays to the Diagnosis of Arboviruses Important for Public Health in Brazil

Arbovirus infections represent a global public health problem, and recent epidemics of yellow fever, dengue, and Zika have shown their critical importance in Brazil and worldwide. Whilst a major effort for vaccination programs has been in the spotlight, a number of aptamer approaches have been proposed in a complementary manner, offering the possibility of differential diagnosis between these arboviruses, which often present similar clinical symptoms, as well as the potential for a treatment option when no other alternative is available. In this review, we aim to provide a background on arbovirus, with a basic description of the main viral classes and the disease they cause, using the Brazilian context to build a comprehensive understanding of their role on a global scale. Subsequently, we offer an exhaustive revision of the diagnostic and therapeutic approaches offered by aptamers against arboviruses. We demonstrate how these promising reagents could help in the clinical diagnosis of this group of viruses, their use in a range of diagnostic formats, from biosensors to serological testing, and we give a short review on the potential approaches for novel aptamer-based antiviral treatment options against different arboviral diseases.

Recent Progress in the Identification of Aptamers Against Bacterial Origins and Their Diagnostic Applications

Aptamers have gained an increasing role as the molecular recognition element (MRE) in diagnostic assay development, since their first conception thirty years ago. The process to screen for nucleic acid-based binding elements (aptamers) was first described in 1990 by the Gold Laboratory. In the last three decades, many aptamers have been identified for a wide array of targets. In particular, the number of reports on investigating single-stranded DNA (ssDNA) aptamer applications in biosensing and diagnostic platforms have increased significantly in recent years. This review article summarizes the recent (2015 to 2020) progress of ssDNA aptamer research on bacteria, proteins, and lipids of bacterial origins that have implications for human infections. The basic process of aptamer selection, the principles of aptamer-based biosensors, and future perspectives will also be discussed.

Nucleic Acid Aptamers as Emerging Tools for Diagnostics and Theranostics

Aptamers are ssDNA or RNA sequences (20-80 nucleotides) generated in vitro by SELEX (Systematic Evolution of Ligands using EXponential enrichment) against diverse range of targets from small molecules to bacteria, viruses, and even eukaryotic cells. Aptamers, also known as chemical bodies, bind to their respective targets with tunable affinity and specificity, making aptamers as potent probes for diagnostics and excellent ligands for drug delivery in therapeutics. In this chapter, we have described the methods for generating DNA aptamers against proteins and their use in theranostics.

In vitro isolation of class-specific oligonucleotide-based small-molecule receptors

Class-specific bioreceptors are highly desirable for recognizing structurally similar small molecules, but the generation of such affinity elements has proven challenging. We here develop a novel 'parallel-and-serial' selection strategy for isolating class-specific oligonucleotide-based receptors (aptamers) in vitro. This strategy first entails parallel selection to selectively enrich cross-reactive binding sequences, followed by serial selection that enriches aptamers binding to a designated target family. As a demonstration, we isolate a class-specific DNA aptamer against a family of designer drugs known as synthetic cathinones. The aptamer binds to 12 diverse synthetic cathinones with nanomolar affinity and does not respond to 11 structurally similar non-target compounds, some of which differ from the cathinone targets by a single atom. This is the first account of an aptamer exhibiting a combination of broad target cross-reactivity, high affinity and remarkable specificity. Leveraging the qualities of this aptamer, instantaneous colorimetric detection of synthetic cathinones at nanomolar concentrations in biological samples is achieved. Our findings significantly expand the binding capabilities of aptamers as class-specific bioreceptors and further demonstrate the power of rationally designed selection strategies for isolating customized aptamers with desired binding profiles. We believe that our aptamer isolation approach can be broadly applied to isolate class-specific aptamers for various small molecule families.

Anti-Idiotype DNA Aptamer Affinity Purification⁻High-Temperature Reversed-Phase Liquid Chromatography: A Simple, Accurate, and Selective Bioanalysis of Bevacizumab

This study presents a simple, accurate, and selective bioanalytical method of bevacizumab detection from plasma samples based on aptamer affinity purification–high-temperature reversed-phased liquid chromatography (HT-RPLC) with fluorescence detection. Bevacizumab in plasma samples was purified using magnetic beads immobilized with an anti-idiotype DNA aptamer for bevacizumab. The purified bevacizumab was separated with HT-RPLC and detected with its native fluorescence. Using aptamer affinity beads, bevacizumab was selectively purified and detected as a single peak in the chromatogram. HT-RPLC achieved good separation for bevacizumab with a sharp peak within 10 min. The calibration curves of the two monoclonal antibodies ranged from 1 to 50 μg/mL and showed good correlation coefficients (r² > 0.999). The limit of detection (LOD) and lower limit of quantification (LLOQ) values for bevacizumab were 0.15 and 0.51 μg/mL, respectively. The proposed method was successfully applied to the bioanalysis of the plasma samples obtained from the patients with lung cancer and may be extended to plan optimal therapeutic programs and for the evaluation of biological equivalencies in the development of biosimilars.

Identification of a highly specific DNA aptamer for Vibrio vulnificus using systematic evolution of ligands by exponential enrichment coupled with asymmetric PCR

Vibrio vulnificus is an important bacterial pathogen that causes serious infections in fish and is also highly pathogenic to humans. Many effective detection methods targeting this pathogen have previously been designed, but many of these methods are time-consuming, complicated and expensive. Thus, these approaches cannot be widely used by small aqacultural concerns. Although DNA aptamers have been used to detect pathogenic bacteria, these have not been applied to marine bacteria, including V. vulnificus. Therefore, we developed a highly specific DNA aptamer for V. vulnificus detection using systematic evolution of ligands by exponential enrichment (SELEX), coupled with asymmetric PCR. After 13 rounds of cross-selection, we identified a novel DNA aptamer (Vapt2). We evaluated the affinity, specificity and limit of detection (LOD) of this aptamer for V. vulnificus. We found that Vapt2 had a high affinity for V. vulnificus (K_d  = 26.8 ± 5.3 nM) and detected this pathogen at a wide range of concentrations (8-2.0 × 10⁸  cfu/ml). Vapt2 bound to V. vulnificus with high selectivity in the presence of other pathogenic bacteria. Our study increases our knowledge of the possible applications of aptamers with respect to marine bacteria. Moreover, our work might provide a framework for the rapid detection of pathogenic bacteria and water pollution.

Staggered Target SELEX, a novel approach to isolate non-cross-reactive aptamer for detection of SEA by apta-qPCR

BACKGROUND AND OBJECTIVE

Aptamers or chemical antibodies are oligonucleotides (DNA or RNA) that are able to bind to various targets with high specificity and affinity such as toxins which are isolated by an in vitro method known as SELEX. To date, there are many SELEX procedures for the isolation of novel aptamers against proteins. However not all modified SELEX are suitable for similar protein based on sequence homology such as staphylococcal enterotoxins. Staphylococcal enterotoxin type A (SEA) is the most prevalent toxin involved in staphylococcal food poisoning (SFP) worldwide. SEA is homologous to Staphylococcal enterotoxin type D (SED) and Staphylococcal enterotoxin type E (SEE) about 50% and 83%, respectively. Here, we have developed Staggered Target SELEX (ST-SELEX) as a novel designed SELEX procedure to acquire specific non-cross-reactive aptamers against SEA as a model protein.

METHODS

In this study, isolated ssDNA aptamers by ST-SELEX were used for detection of SEA via apta-Real time PCR (apta-qPCR). After in silico analysis of SEA protein with SEE and finding the specific region on the surface of protein, ST-SELEX was carried out in two steps (classical SELEX and Second SELEX). Finally, after isolating high specific aptamers, the apta-qPCR was used for the detection of the SEA. In this technique, poly-clonal antibody against SEA was immobilized on protein G sepharose beads (Ab-PGs). Then, the SEA protein was captured by poly clonal antibody as the target that immobilized on sepharose beads. The isolated aptamers were bound on the surface of SEA protein that captured by Ab-PGs. Finally, the heat-released aptamers were amplified by qPCR.

RESULT

Our investigation showed that the aptamers were generated in vitro by a ten-round selection process based on ST-SELEX procedure with dissociation constant (K_D) value 7.44± 0.6 nM and limit of detection (LOD) of 146.67 fM.

DISCUSSION AND CONCLUSION

The advantage of ST-SELEX compared to other SELEX methods was to select a specific non cross-reactive aptamer against two or more proteins with high sequence homology. These aptamers can be used in sensitive detection methods such as apta-qPCR.

Aptamers in the Therapeutics and Diagnostics Pipelines

Aptamers are short single-stranded DNA or RNA oligonucleotides that can selectively bind to small molecular ligands or protein targets with high affinity and specificity, by acquiring unique three-dimensional structures. Aptamers have the advantage of being highly specific, relatively small in size, non-immunogenic and can be easily stabilized by chemical modifications, thus allowing expansion of their diagnostic and therapeutic potential. Since the invention of aptamers in the early 1990s, great efforts have been made to make them clinically relevant for diseases like macular degeneration, cancer, thrombosis and inflammatory diseases. Furthermore, owing to the aforementioned advantages and unique adaptability of aptamers to point-of-care platforms, aptamer technology has created a stable niche in the field of in vitro diagnostics by enhancing the speed and accuracy of diagnoses. The aim of this review is to give an overview on aptamers, highlight the inherent therapeutic and diagnostic opportunities and challenges associated with them and present various aptamers that have reached therapeutic clinical trials, diagnostic markets or that have immediate translational potential for therapeutics and diagnostics applications.

Multiplex Immunoassays Utilizing Differential Affinity Using Aptamers Generated by MARAS

Disease diagnosis typically requires to determine concentration of multiple biomarkers in patient serums. Here, a novel method for multiplex immunoassays is proposed and the feasibility is demonstrated. The method utilizes the differential affinity between aptamers and multiple analytes for multiplex immunoassays. During the selection, aptamers capable of binding to multiple analytes with different affinities are screened from a random oligonucleotide library using the MARAS procedure with different magnetic field conditions for different target analytes. During the detection, the same magnetic field conditions are applied to differentiate different target analytes in blind serums. The results show that the recovery rates of the spiked targets in BD buffer and blind serums are similar. Moreover, there is a minimal interference resulting from non-specific binding of molecules in serums other than the target molecules. Therefore, the use of differential affinities between aptamers and different analytes for multiplex immunoassays is proved to be feasible.

Detecting and Discriminating Shigella sonnei Using an Aptamer-Based Fluorescent Biosensor Platform

In this paper, a Whole-Bacteria SELEX (WB-SELEX) strategy was adopted to isolate specific aptamers against Shigella sonnei. Real-time PCR amplification and post-SELEX experiment revealed that the selected aptmers possessed a high binding affinity and specificity for S. sonnei. Of the 21 aptamers tested, the C(t) values of the SS-3 and SS-4 aptamers (Ct = 13.89 and Ct = 12.23, respectively) had the lowest value compared to other aptamer candidates. The SS-3 and SS-4 aptamers also displayed a binding affinity (K_D) of 39.32 ± 5.02 nM and 15.89 ± 1.77 nM, respectively. An aptamer-based fluorescent biosensor assay was designed to detect and discriminate S. sonnei cells using a sandwich complex pair of SS-3 and SS-4. The detection of S. sonnei by the aptamer based fluorescent biosensor platform consisted of three elements: (1) 5’amine-SS-4 modification in a 96-well type microtiter plate surface (N-oxysuccinimide, NOS) as capture probes; (2) the incubation with S. sonnei and test microbes in functionalized 96 assay wells in parallel; (3) the readout of fluorescent activity using a Cy5-labeled SS-3 aptamer as the detector. Our platform showed a significant ability to detect and discriminate S. sonnei from other enteric species such as E. coli, Salmonella typhimurium and other Shigella species (S. flexneri, S. boydii). In this study, we demonstrated the feasibility of an aptamer sensor platform to detect S. sonnei in a variety of foods and pave the way for its use in diagnosing shigellosis through multiple, portable designs.

Generation of Aptamers from A Primer-Free Randomized ssDNA Library Using Magnetic-Assisted Rapid Aptamer Selection

Aptamers are oligonucleotides that can bind to specific target molecules. Most aptamers are generated using random libraries in the standard systematic evolution of ligands by exponential enrichment (SELEX). Each random library contains oligonucleotides with a randomized central region and two fixed primer regions at both ends. The fixed primer regions are necessary for amplifying target-bound sequences by PCR. However, these extra-sequences may cause non-specific bindings, which potentially interfere with good binding for random sequences. The Magnetic-Assisted Rapid Aptamer Selection (MARAS) is a newly developed protocol for generating single-strand DNA aptamers. No repeat selection cycle is required in the protocol. This study proposes and demonstrates a method to isolate aptamers for C-reactive proteins (CRP) from a randomized ssDNA library containing no fixed sequences at 5' and 3' termini using the MARAS platform. Furthermore, the isolated primer-free aptamer was sequenced and binding affinity for CRP was analyzed. The specificity of the obtained aptamer was validated using blind serum samples. The result was consistent with monoclonal antibody-based nephelometry analysis, which indicated that a primer-free aptamer has high specificity toward targets. MARAS is a feasible platform for efficiently generating primer-free aptamers for clinical diagnoses.

In Vitro Selection of DNA Aptamers that Binds Geniposide

Geniposide is a key iridoid glycoside from Gardenia jasminoides fructus widely used in traditional Chinese herbal medicine. However, detection of this small molecule represents a significant challenge mostly due to the lack of specific molecular recognition elements. In this study, we have performed in vitro selection experiments to isolate DNA aptamers that can specifically bind geniposide. Using a stringent selection procedure, we have isolated DNA aptamers that can distinguish geniposide from genipin and glucose, two structural analogs of geniposide. Two top aptamers exhibit low micromolar binding affinity towards geniposide, but show significantly reduced affinity to genipin and glucose. These aptamers have the potential to be further developed into analytical tools for the detection of geniposide.

In vitro RNA SELEX for the generation of chemically-optimized therapeutic RNA drugs

Aptamers are single-stranded DNA or RNA oligonucleotides that can bind with exquisitely high affinity and specificity to target molecules and are thus often referred to as 'nucleic acid' antibodies. Oligonucleotide aptamers are derived through a process of directed chemical evolution called SELEX (Systematic Evolution of Ligands by Exponential enrichment). This chemical equivalent of Darwinian evolution was first described in 1990 by Tuerk & Gold and Ellington & Szostak and has since yielded aptamers for a wide-range of applications, including biosensor technologies, in vitro diagnostics, biomarker discovery, and therapeutics. Since the inception of the original SELEX method, numerous modifications to the protocol have been described to fit the choice of target, specific conditions or applications. Technologies such as high-throughput sequencing methods and microfluidics have also been adapted for SELEX. In this chapter, we outline key steps in the SELEX process for enabling the rapid identification of RNA aptamers for in vivo applications. Specifically, we provide a detailed protocol for the selection of chemically-optimized RNA aptamers using the original in vitro SELEX methodology. In addition, methods for performing next-generation sequencing of the RNAs from each round of selection, based on Illumina sequencing technology, are discussed.

Integrated Microfluidic Isolation of Aptamers Using Electrophoretic Oligonucleotide Manipulation

We present a microfluidic approach to integrated isolation of DNA aptamers via systematic evolution of ligands by exponential enrichment (SELEX). The approach employs a microbead-based protocol for the processes of affinity selection and amplification of target-binding oligonucleotides, and an electrophoretic DNA manipulation scheme for the coupling of these processes, which are required to occur in different buffers. This achieves the full microfluidic integration of SELEX, thereby enabling highly efficient isolation of aptamers in drastically reduced times and with minimized consumption of biological material. The approach as such also offers broad target applicability by allowing selection of aptamers with respect to targets that are either surface-immobilized or solution-borne, potentially allowing aptamers to be developed as readily available affinity reagents for a wide range of targets. We demonstrate the utility of this approach on two different procedures, respectively for isolating aptamers against a surface-immobilized protein (immunoglobulin E) and a solution-phase small molecule (bisboronic acid in the presence of glucose). In both cases aptamer candidates were isolated in three rounds of SELEX within a total process time of approximately 10 hours.

Hi-Fi SELEX: A High-Fidelity Digital-PCR Based Therapeutic Aptamer Discovery Platform

Current technologies for aptamer discovery typically leverage the systematic evolution of ligands by exponential enrichment (SELEX) concept by recursively panning semi-combinatorial ssDNA or RNA libraries against a molecular target. The expectation is that this iterative selection process will be sufficiently stringent to identify a candidate pool of specific high-affinity aptamers. However, failure of this process to yield promising aptamers is common, due in part to (i) limitations in library designs, (ii) retention of non-specific aptamers during screening rounds, (iii) excessive accumulation of amplification artifacts, and (iv) the use of screening criteria (binding affinity) that does not reflect therapeutic activity. We report a new selection platform, High-Fidelity (Hi-Fi) SELEX, that introduces fixed-region blocking elements to safeguard the functional diversity of the library. The chemistry of the target-display surface and the composition of the equilibration solvent are engineered to strongly inhibit non-specific retention of aptamers. Partition efficiencies approaching 10(6) are thereby realized. Retained members are amplified in Hi-Fi SELEX by digital PCR in a manner that ensures both elimination of amplification artifacts and stoichiometric conversion of amplicons into the single-stranded library required for the next selection round. Improvements to aptamer selections are first demonstrated using human α-thrombin as the target. Three clinical targets (human factors IXa, X, and D) are then subjected to Hi-Fi SELEX. For each, rapid enrichment of ssDNA aptamers offering an order-nM mean equilibrium dissociation constant (Kd) is achieved within three selection rounds, as quantified by a new label-free qPCR assay reported here. Therapeutic candidates against factor D are identified.

Selecting DNA aptamers for endotoxin separation

OBJECTIVES

To select aptamers for endotoxin separation from a 75-nucleotide single-stranded DNA random library using systematic evolution of ligands by exponential enrichment.

RESULTS

After 15 rounds of selection, the final pool of aptamers was specific to endotoxin. Structural analysis of aptamers that appeared more than once suggested that one aptamer can form a G-quartet structure. Tests for binding affinity and specificity showed that this aptamer exhibited a high affinity for endotoxin. Using this aptamer, aptamer-magnetic beads were designed to separate endotoxin.

CONCLUSIONS

Using these aptamer-magnetic beads, a new method to separate endotoxin was developed to enable specific separation of endotoxin that can be applied to drug and food products.

Enzymatic preparation of multimilligram amounts of pure single-stranded DNA samples for material and analytical sciences

We present a method for high-yield production of multimilligram amounts of pure single-stranded DNA employing rolling circle amplification (RCA) and processing by restriction enzymes. Pure and homogeneous samples are produced with minimal handling time, reagents, and waste products. The RCA method is more than twice as efficient in dNTP incorporation than conventional polymerase chain reaction in producing end product. The validity and utility of the method are demonstrated in the production of a uniformly (13)C/(15)N-labeled 38-nt cocaine aptamer DNA used in nanosensing devices.

HPLC purification of RNA aptamers up to 59 nucleotides with single-nucleotide resolution

An RNA sample is usually heterogeneous. RNA heterogeneity refers to difference in length or size (i.e., number of nucleotides [nt]), sequence, or alternative but coexisting conformations. Separation and purification of RNA is generally required for investigating the structure and function of RNA, such as RNA catalysis and RNA structure determination by nuclear magnetic resonance or crystallography. Separation and purification of RNA is also required for using RNAs as functional probes and therapeutics as well as building blocks for RNA nanoparticles. Previously established protocols are limited in separating RNAs longer than 25 nt by single-nucleotide resolution. When the length of RNAs becomes longer, single-nucleotide separation of RNAs becomes more challenging. Here we describe protocols, by the use of ion-pair, reverse-phase high-performance liquid chromatography (HPLC), to extend our ability to separate regular RNAs up to 59 nt with single-nucleotide resolution. For chemically modified RNAs at 2' positions on the ribose, we can resolve RNAs of similar sizes even with a 26 Da difference. This is much less than 320 Da, an average single-nucleotide molecular weight difference.

Identification of DNA aptamers toward epithelial cell adhesion molecule via cell-SELEX

The epithelial cell adhesion molecule (EpCAM, also known as CD326) is a transmembrane glycoprotein that is specifically detected in most adenocarcinomas and cancer stem cells. In this study, we performed a Cell systematic evolution of ligands by exponential enrichment (SELEX) experiment to isolate the aptamers against EpCAM. After seven round of Cell SELEX, we identified several aptamer candidates. Among the selected aptamers, EP166 specifically binds to cells expressing EpCAM with an equilibrium dissociation constant (Kd) in a micromolar range. On the other hand, it did not bind to negative control cells. Moreover, EP166 binds to J1ES cells, a mouse embryonic stem cell line. Therefore, the isolated aptamers against EpCAM could be used as a stem cell marker or in other applications in both stem cell and cancer studies.

Isolation and characterization of a new class of DNA aptamers specific binding to Singapore grouper iridovirus (SGIV) with antiviral activities

The Singapore grouper iridovirus (SGIV), a member of the genus Ranavirus, is a major viral pathogen that has caused heavy economic losses to the grouper aquaculture industry in China and Southeast Asia. No efficient method of controlling SGIV outbreaks is currently available. Systematic evolution of ligands by exponential enrichment (SELEX) is now widely used for the in vitro selection of artificial ssDNA or RNA ligands, known as aptamers, which bind to targets through their stable three-dimensional structures. In our current study, we generated ssDNA aptamers against the SGIV, and evaluated their ability to block SGIV infection in cultured fish cells and cultured fish in vivo. The anti-SGIV DNA aptamers, LMB-761, LMB-764, LMB-748, LMB-439, LMB-755, and LMB-767, were selected from a pool of oligonucleotides randomly generated using a SELEX iterative method. The analysis of the secondary structure of the aptamers revealed that they all formed similar stem-loop structures. Electrophoretic mobility shift assays showed that the aptamers bound SGIV specifically, as evidenced by a lack cross-reactivity with the soft shell turtle iridovirus. The aptamers produced no cytotoxic effects in cultured grouper spleen cells (GS). Assessment of cytopathic effects (CPE) and viral titer assays showed that LMB-761, LMB-764, LMB-748, LMB-755, and LMB-767 significantly inhibited SGIV infection in GS cells. The in vivo experiments showed that LMB-761 and LMB-764 reduced SGIV-related mortality, and no negative effects were observed in orange-spotted grouper, Epinephelus coioides, indicating that these DNA aptamers may be suitable antiviral candidates for controlling SGIV infections in fish reared in marine aquaculture facilities.

Inhibition of hepatitis C virus infection by NS5A-specific aptamer

To increase efficacy of hepatitis C treatment, future regiments will incorporate multiple direct-acting antiviral drugs. HCV NS5A protein was expressed and purified. Aptamers against NS5A were screened and obtained by the selective evolution of ligands by exponential enrichment approach and the antiviral actions of the aptamers were tested. The mechanisms through which the aptamers exert their antiviral activity were explored. The aptamers NS5A-4 and NS5A-5 inhibit HCV RNA replication and infectious virus production without causing cytotoxicity in human hepatocytes. The aptamers do not affect hepatitis B virus replication in HepG2.2.15 cells. Interferon beta (IFN-β) and interferon-stimulated genes (ISGs) are not induced by the aptamers in HCV-infected hepatocytes. Further study shows that domain I and domain III of NS5A protein are involved in the suppression of HCV RNA replication and infectious virus production by NS5A-4. Y2105H within NS5A is the major resistance mutation identified. NS5A aptamer disrupts the interaction of NS5A with core protein. The data suggest that the aptamers against NS5A protein may exert antiviral effects through inhibiting viral RNA replication, preventing the interaction of NS5A with core protein. Aptamers for NS5A may be used to understand the mechanisms of virus replication and assembly and served as potential therapeutic agents for hepatitis C.

From ugly duckling to swan: unexpected identification from cell-SELEX of an anti-Annexin A2 aptamer targeting tumors

Background

Cell-SELEX is now widely used for the selection of aptamers against cell surface biomarkers. However, despite negative selection steps using mock cells, this method sometimes results in aptamers against undesirable targets that are expressed both on mock and targeted cells. Studying these junk aptamers might be useful for further applications than those originally envisaged.

Methodology/Principal Findings

Cell-SELEX was performed to identify aptamers against CHO-K1 cells expressing human Endothelin type B receptor (ET_BR). CHO-K1 cells were used for negative selection of aptamers. Several aptamers were identified but no one could discriminate between both cell lines. We decided to study one of these aptamers, named ACE4, and we identified that it binds to the Annexin A2, a protein overexpressed in many cancers. Radioactive binding assays and flow cytometry demonstrated that the aptamer was able to bind several cancer cell lines from different origins, particularly the MCF-7 cells. Fluorescence microscopy revealed it could be completely internalized in cells in 2 hours. Finally, the tumor targeting of the aptamer was evaluated in vivo in nude mice xenograft with MCF-7 cells using fluorescence diffuse optical tomography (fDOT) imaging. Three hours after intravenous injection, the aptamer demonstrated a significantly higher uptake in the tumor compared to a scramble sequence.

Conclusions/Significance

Although aptamers could be selected during cell-SELEX against other targets than those initially intended, they represent a potential source of ligands for basic research, diagnoses and therapy. Here, studying such aptamers, we identify one with high affinity for Annexin A2 that could be a promising tool for biomedical application.

Selection and identification of a DNA aptamer that mimics saxitoxin in antibody binding

In this article, high-affinity single-stranded DNA (ssDNA) aptamer-targeting F(ab')₂ fragments of saxitoxin (STX) antibodies were selected from a random ssDNA library by the SELEX strategy. After 16 rounds of repeated selection, the enriched ssDNA library was sequenced, and all of the sequences were carefully identified by indirect enzyme-linked assay and indirect competitive enzyme-linked assay (icELISA). The candidate aptamers in the above identification were selected for further characterization by icELISA and the equilibrium filtration method. We successfully obtained an aptamer that mimics STX in antibody binding, and a substitute for STX in aptamer form has been developed. Further work is in progress aimed at using this aptamer substitute to replace the STX standard in an antibody-based, nontoxic detection method for field determination of STX in seafood products.

Single-nucleotide resolution of RNAs up to 59 nucleotides by high-performance liquid chromatography

Ion-pair, reverse-phase high-performance liquid chromatography (HPLC) is a standard analytical platform for separating, purifying, and analyzing RNAs. However, a single-nucleotide resolution by using HPLC is currently limited to RNAs shorter than 25 nucleotides (nt). Here we describe a method of separating three RNA aptamers with 57, 58, and 59nt on an XBridge ion-pair, reverse-phase HPLC column by a single-nucleotide resolution. Under a similar condition, we also show the capability of our method to resolve two structurally different, yet sequence or mass identical, 59-nt aptamers. We establish that the optimal condition to achieve a single-nucleotide resolution correlates to 50°C and zero magnesium concentration in mobile phases. The ion-pairing agent, the buffer, and the solvent we use are also compatible for post-HPLC analysis such as mass spectrometry. Therefore, our method provides a new way of detecting, analyzing, and separating RNAs by conformation or structure and extends the ability to separate RNAs that are longer than 25nt by single-nucleotide resolution.

DNA aptamers selectively target Leishmania infantum H2A protein

Parasites of the genus Leishmania produce leishmaniasis which affects millions people around the world. Understanding the molecular characteristics of the parasite can increase the knowledge about the mechanisms underlying disease development and progression. Thus, the study of the molecular features of histones has been considered of particular interest because Leishmania does not condense the chromatin during mitosis and, consequently, a different role for these proteins in the biology of the parasite can be expected. Furthermore, the sequence divergences in the amino and in the carboxy-terminal domains of the kinetoplastid core histones convert them in potential diagnostic and/or therapeutics targets. Aptamers are oligonucleotide ligands that are selected in vitro by their affinity and specificity for the target as a consequence of the particular tertiary structure that they are able to acquire depending on their sequence. Development of high-affinity molecules with the ability to recognize specifically Leishmania histones is essential for the progress of this kind of study. Two aptamers which specifically recognize Leishmania infantum H2A histone were cloned from a previously obtained ssDNA enriched population. These aptamers were sequenced and subjected to an in silico analysis. ELONA, slot blot and Western blot were performed to establish aptamer affinity and specificity for LiH2A histone and ELONA assays using peptides corresponding to overlapped sequences of LiH2A were made mapping the aptamers:LiH2A interaction. As "proofs of concept", aptamers were used to determine the number of parasites in an ELONA platform and to purify LiH2A from complex mixtures. The aptamers showed different secondary structures among them; however, both of them were able to recognize the same peptides located in a side of the protein. In addition, we demonstrate that these aptamers are useful for LiH2A identification and also may be of potential application as diagnostic system and as a laboratory tool with purification purpose.

[Screening and characterization of aptamers of Cepsilon3-Cepsilon4 protein]

In order to obtain nucleotides aptamers bind to IgE, 80 bp nucleotides single-stranded DNA library containing 40 random nucleotides was designed and synthesized. Oligonucleotides that bind to human Cepsilon3-Cepsilon4 protein were isolated from ssDNA pools by the systematic evolution of ligands by exponential enrichment (SELEX) method using nitrocellulose filters as screening medium. Through the optimization of critical PCR and asymmetric PCR parameters including annealing temperature, cycles, and molar ratios of target protein and ssDNA etc, a suitable screening system was established. The aptamers of Cepsilon3-Cepsilon4 protein with high affinity and high specificity were identified by ELISA with biotin-streptavidin-horseradish peroxidase system, and its primary sequence and second structure were analyzed by DNAMAN package and DNA folding sever after being cloned and sequenced. Moreover, target protein was bound to one aptamer and another aptamer modified with biotion together forming a sandwich-like complex, which was captured in microwell to detect IgE concentration using the optimal combination in the sandwich method named enzyme-linked aptamers sorption assay (ELASA). The method could be used for the quantitative detection of human IgE, and whose sensitivity reached to 120 ng x mL(-1).

Rapid identification of cell-specific, internalizing RNA aptamers with bioinformatics analyses of a cell-based aptamer selection

Background

The broad applicability of RNA aptamers as cell-specific delivery tools for therapeutic reagents depends on the ability to identify aptamer sequences that selectively access the cytoplasm of distinct cell types. Towards this end, we have developed a novel approach that combines a cell-based selection method (cell-internalization SELEX) with high-throughput sequencing (HTS) and bioinformatics analyses to rapidly identify cell-specific, internalization-competent RNA aptamers.

Methodology/Principal Findings

We demonstrate the utility of this approach by enriching for RNA aptamers capable of selective internalization into vascular smooth muscle cells (VSMCs). Several rounds of positive (VSMCs) and negative (endothelial cells; ECs) selection were performed to enrich for aptamer sequences that preferentially internalize into VSMCs. To identify candidate RNA aptamer sequences, HTS data from each round of selection were analyzed using bioinformatics methods: (1) metrics of selection enrichment; and (2) pairwise comparisons of sequence and structural similarity, termed edit and tree distance, respectively. Correlation analyses of experimentally validated aptamers or rounds revealed that the best cell-specific, internalizing aptamers are enriched as a result of the negative selection step performed against ECs.

Conclusions and Significance

We describe a novel approach that combines cell-internalization SELEX with HTS and bioinformatics analysis to identify cell-specific, cell-internalizing RNA aptamers. Our data highlight the importance of performing a pre-clear step against a non-target cell in order to select for cell-specific aptamers. We expect the extended use of this approach to enable the identification of aptamers to a multitude of different cell types, thereby facilitating the broad development of targeted cell therapies.

[Screening and structure analysis of the aptamers against human recombinant S100A8 protein]

OBJECTIVE

To obtain and characterize the single-stranded DNA (ssDNA) aptamers of human recombinant S100A8 protein.

METHODS

According to systematic evolution of ligands by exponential enrichment (SELEX) method, an ssDNA random library was subjected to 11 rounds of selection against human recombinant S100A8 protein. Using a biotin-strepavidin-HRP detecting system, the binding capacity of ssDNA to targeted protein from each round was monitored, until the binding level reached a saturation state. Then the ssDNA from the last cycle were cloned and sequenced, and the sequences were further analyzed by programs of bioinformatics.

RESULTS

After 11 cycles of selection, 30 clones were selected randomly and sent to sequence analysis. A unique conserved sequence was not obtained among the 30 aptamers by the primary structure analysis, but three aptamers were found identical with three other aptamers respectively. The secondary structure analysis revealed that stem-loop and pocket were the main motifs, indicating that they may play a key role in the binding of aptamers to human recombinant S100A8 protein. According to the ratio of stem-loop to pocket, 30 aptamers were divided into 4 groups, and the affinity of aptamer No. 35 from group I was the highest.

CONCLUSION

Aptamers against human recombinant S100A8 protein were identified by SELEX method, which laid the basis for the further application of the aptamers and the function study of human recombinant S100A8 protein.

Isolation of DNA aptamers using micro free flow electrophoresis

A micro free flow electrophoresis (μFFE) device was used to select DNA aptamers for human immunoglobulin E (IgE). The continuous nature of μFFE allowed 1.8 × 10(14) sequences to be introduced over a period of 30 min, a 300-fold improvement in library size over capillary electrophoresis based selections (CE-SELEX). Four rounds of selection were performed within four days. Aptamers with low nM dissociation constants for IgE were identified after a single round of μFFE selection.

Isolation and characterization of an RNA aptamer for the HPV-16 E7 oncoprotein

BACKGROUND AND AIMS

Cervical cancer is a common neoplastic disease affecting women worldwide. Expression of human papillomavirus type 16 (HPV-16) E6/E7 genes is frequently associated with cervical cancer, representing ideal targets for diagnostic and therapeutic strategies. Aptamers are oligonucleotide ligands capable of binding with high affinity and specificity to relevant markers in therapeutics and disease detection. The aim of the study was to isolate an RNA aptamer specific for the HPV-16 E7 protein.

METHODS

Aptamers were selected from a randomized oligonucleotide library using a modified SELEX method and recombinant HPV-16 E7 protein. Isolated aptamers were cloned and sequenced for in silico analysis. Interaction and electromobility shift assays (EMSA) were performed to establish aptamer specificity and affinity for E7. RNase footprinting and serial deletions of the aptamer and the E7 protein were made to characterize the aptamer-protein complex. Sandwich slot-blot assays were used for K(D) determination.

RESULTS

After several rounds of SELEX, an aptamer (G5α3N.4) exhibited specificity for E7 using cell-free and protein extracts. G5α3N.4 binding yielded a K(D) comparable to aptamers directed to other small targets. Enzymatic and genetic analysis of G5α3N.4 binding showed a secondary structure with two stem-loop domains joined by single-stranded region contacting E7 in a clamp-like manner. The G5α3N.4 aptamer also produced specific complexes in HPV-positive cervical carcinoma cells.

CONCLUSIONS

The affinity and specificity of G5α3N.4 binding domains for the HPV-16 E7 protein may be used for the detection of papillomavirus infection and cervical cancer.

Isolation and identification of the DNA aptamer target to acetamiprid

As an alternative to antibodies, aptamers have a great potential as analytical tools for pesticide detection. In this work, aptamers targeting acetamiprid were selected by a specific systematic evolution of ligands by exponential enrichment (SELEX) strategy, where a single-stranded DNA (ssDNA) library was immobilized and target modification was eliminated. After 18 rounds of repeated selection, the ssDNA pool was enriched and then 14 sequences were selected and carefully identified. At last, an acetamiprid-specific aptamer with the apparent dissociation constant (K(d)) estimated to be 4.98 μM was successfully obtained. Further work is ongoing to develop an aptamer-based detection method for field determination of this pesticides in agricultural products and environmental samples.

In vitro selection of RNA aptamers against a conserved region of the Plasmodium falciparum erythrocyte membrane protein 1

The var-gene encoding Plasmodium falciparum erythrocyte membrane protein 1 (PfEMP1) is known to play a major role in the pathogenicity of the P. falciparum parasite. The protein enables the parasite to adhere to the endothelial linings of small blood vessels (cytoadherence) as well as to non-infected erythrocytes (rosetting), thus preventing clearance from the bloodstream. The development and spread of resistance towards most anti-malarial drugs used for treatment and prevention of the most severe form of malaria truly emphasise the importance of a continuous research and development of new drugs. In this study we use Systematic Evolution of Ligands by EXponential enrichment (SELEX) methodology to isolate high-affinity ligands (aptamers). To validate the results from the SELEX in vitro selection, different aptamers have been selected against PfEMP1 in a live cell assay of P. falciparum strain FCR3S1.2, a highly rosetting strain. We have been able to show the rosette disrupting capacity of these SELEX-aptamers at concentrations of 33 nM and with 100% disruption at 387 nM. The described results show that RNA aptamers are promising candidates for adjunct therapy in severe malaria.

RNA aptamer binding to polyhistidine-tag

Polyhistidine-tag (His-tag) is a powerful tool for purification of recombinant protein. His-tagged protein can be affinity-purified by using resins immobilizing Ni2+ or anti-His-tag antibodies. However, Ni2+-affinity-purification is prevented by the presence of divalent cations. The purification with antibodies has contamination of antibody peptides, which interferes with following analysis. In the present study, we isolated RNA aptamers binding to His-tag. The best clone, named shot47, bound to the target with low picomolar dissociation constant. In the presence of divalent cations, shot47 was substitutable for antibodies against His-tag on ELISA, immunoprecipitation, and Western blotting. Shot47 can be synthesized easily by in vitro transcription. Thus, shot47 would be applicable as a useful and cost-effective tool for biochemical analyses.

Effective isolation of RNA aptamer through suppression of PCR bias

An aptamer is a short RNA or DNA molecule that binds to a specific target. The main strategy for obtaining aptamers is systematic evolution of ligands by exponential enrichment (SELEX). Although various SELEX techniques have been devised and refined on the basis of the selection technique used, in most cases, the isolation of an aptamer still requires several trials or the use of special equipment. In the present study, we attempted SELEX in which PCR bias was suppressed by using RNA transcription to amplify nucleic acids. This procedure, which can be accomplished easily and inexpensively without special equipment, effectively simplifies the SELEX process. Using this SELEX, we obtained large numbers of RNA aptamers against the target that could not be isolated by standard SELEX. The results of our study suggest that exclusion of PCR bias may be far more important than previously assumed for isolating RNA aptamers via SELEX.

Selection and elution of aptamers using nanoporous sol-gel arrays with integrated microheaters

RNA and DNA aptamers that bind to target molecules with high specificity and affinity have been a focus of diagnostics and therapeutic research. These aptamers are obtained by SELEX (Systematic Evolution of Ligands by EXponential enrichment) often requiring more than 10 successive cycles of selection and amplification, where each cycle normally takes 2 days per cycle of SELEX. Here, we have demonstrated the use of sol-gel arrays of proteins in a microfluidic system for efficient selection of RNA aptamers against multiple target molecules. The microfluidic chip incorporates five sol-gel binding droplets, within which specific target proteins are imbedded. The droplets are patterned on top of individually addressable electrical microheaters used for selective elution of aptamers bound to target proteins in the sol-gel droplets. We demonstrate that specific aptamers bind their respective protein targets and can be selectively eluted by micro-heating. Finally, our microfluidic SELEX system greatly improved selection efficiency, reducing the number of selection cycles needed to produce high affinity aptamers. The process is readily scalable to larger arrays of sol-gel-embedded proteins. To our knowledge, this is the first demonstration of a chip-based selection of aptamers using microfluidics, thereby allowing development of a high throughput and efficient SELEX procedures.

Selection of a DNA aptamer that binds 8-OHdG using GMP-agarose

DNA aptamers, which bind specific molecule, such as 8-OHdG, with high affinity were investigated using an in vitro selection strategy called systematic evolution of ligands by exponential enrichment (SELEX). However, 8-OHdG was difficult to immobilize on a carrier for SELEX. Therefore, a DNA aptamer binding to 8-OHdG was selected using GMP-agarose as an analogue from a library of about 4(60) random ssDNA sources. As a result, three aptamer candidates were selected. Among the selected DNA aptamers, the No. 22 DNA aptamer exhibited a high affinity for 8-OHdG. The dissociation constant, K(D), of No. 22 DNA aptamer was on the order of 0.1micromol/L. This result suggests that using an analogue will be a useful new SELEX method for obtaining various aptamers that are difficult to immobilize on a matrix.

Micromagnetic selection of aptamers in microfluidic channels

Aptamers are nucleic acid molecules that have been selected in vitro to bind to their molecular targets with high affinity and specificity. Typically, the systematic evolution of ligands by exponential enrichment (SELEX) process is used for the isolation of specific, high-affinity aptamers. SELEX, however, is an iterative process requiring multiple rounds of selection and amplification that demand significant time and labor. Here, we describe an aptamer discovery system that is rapid, highly efficient, automatable, and applicable to a wide range of targets, based on the integration of magnetic bead-based SELEX process with microfluidics technology. Our microfluidic SELEX (M-SELEX) method exploits a number of unique phenomena that occur at the microscale and implements a design that enables it to manipulate small numbers of beads precisely and isolate high-affinity aptamers rapidly. As a model to demonstrate the efficiency of the M-SELEX process, we describe here the isolation of DNA aptamers that tightly bind to the light chain of recombinant Botulinum neurotoxin type A (with low-nanomolar dissociation constant) after a single round of selection.

Aptamer selection express: a novel method for rapid single-step selection and sensing of aptamers

Here we describe a new DNA capture element (DCE) sensing system, based on the quenching and dequenching of a double-stranded aptamer. This system shows very good sensitivity and thermal stability. While quenching, dequenching, and separating the DCE systems made from different aptamers (all selected by SELEX), an alternative method to rapidly select aptamers was developed-the Aptamer Selection Express (ASExp). This process has been used to select aptamers against different types of targets (Bacillus anthracis spores, Bacillus thuringiensis spores, MS-2 bacteriophage, ovalbumin, and botulinum neurotoxin). The DCE systems made from botulinum neurotoxin aptamers selected by ASExp have been investigated. The results of this investigation indicate that ASExp can be used to rapidly select aptamers for the DCE sensing system.

Selection and characterization of anti-NF-kappaB p65 RNA aptamers

NF-kappaB transcription factors include a group of five mammalian proteins that form hetero- or homodimers and regulate hundreds of target genes involved in acute inflammation, HIV-1 transcription activation, and resistance to cancer therapy. We previously used in vitro selection to develop a small RNA aptamer (anti-p50) that binds the DNA-binding domain of NF-kappaB p50(2) with low nanomolar affinity but does not bind NF-kappaB p65(2). Here, we report the in vitro selection of anti-NF-kappaB p65 RNA aptamers using parallel in vitro selections with either a fully randomized RNA library or a degenerate RNA library based on the primary sequence of the 31-nucleotide anti-p50 RNA aptamer. We report the characterization of these aptamers with respect to NF-kappaB target specificity, affinity, minimal sequence requirements, secondary structure, and competition with DNA kappaB sites. These results expand opportunities for artificial inhibition of NF-kappaB transcription factor dimers containing p65 subunits.

Semi-automated selection of DNA aptamers using magnetic particle handling

We have developed a semi-automatic selection procedure for DNA aptamers. Employing a robotic workstation for magnetic particle handling, this method allows for a fast, reproducible, and parallelized selection of DNA aptamers. The selection protocol is designed to provide high flexibility and versatility in terms of choice of buffers and reagents, as well as stringency of selection. Using this procedure, we have successfully isolated ligand-specific, high-affinity DNA aptamers.

Microfluidic selection and applications of aptamers

The high affinity and specificity of aptamers make them ideal reagents for a wide range of analytical applications. It is not surprising that they are finding application in microfluidics as well. CE has proven to be an efficient technique for isolating aptamers. Aptamers have been used as affinity reagents in CE assays. Aptamer-based chromatography stationary phases have demonstrated unique selectivities. Possibly the application that holds the highest potential is aptamer microarrays for screening proteomic samples.

In vitro selection and characterization of cellulose-binding DNA aptamers

Many nucleic acid enzymes and aptamers have modular architectures that allow them to retain their functions when combined with other nucleotide sequences. This modular function facilitates the engineering of RNAs and DNAs that have more complex functions. We sought to create new DNA aptamers that bind cellulose to provide a module for immobilizing DNAs. Cellulose has been used in a variety of applications ranging from coatings and films to pharmaceutical preparations, and therefore DNA aptamers that bind cellulose might enable new applications. We used in vitro selection to isolate aptamers from a pool of random-sequence DNAs and subjected two distinct clones to additional rounds of mutagenesis and selection. One aptamer (CELAPT 14) was chosen for sequence minimization and more detailed biochemical analysis. CELAPT 14 aptamer variants exhibit robust binding both to cellulose powder and paper. Also, an allosteric aptamer construct was engineered that exhibits ATP-mediated cellulose binding during paper chromatography.

Isolation of RNA aptamers against human Toll-like receptor 3 ectodomain

Toll-like receptor 3 (TLR3) detects double-stranded RNA (dsRNA) known as a universal viral molecular pattern and activates the antiviral immune response. While TLR3 preferentially recognizes polyriboinosine-polyribocytidylic acid (poly (I:C)), a sequence-specific dsRNA has not yet been shown to activate TLR3. To determine whether TLR3 preferentially recognizes some specific sequence that acts on the signaling pathway of TLR3, in vitro selection against human TLR3 ectodomain (TLR3 ECD) was performed. After seventh selection cycle, two major classes, Family-I and -II, were emerged from 64 clones with binding constants of about 3 nM. Although these aptamers bound to TLR3 ECD with high affinity in vitro, they did not have agonist and antagonist effects on TLR3 signaling in TLR3-transfected HEK293 cells. Further analyses of the structure/function relationship of these aptamers will be carried out by mutagenesis, RNase mapping and competition assay using poly (I:C).

One-step selection of Vaccinia virus-binding DNA aptamers by MonoLEX

Background

As a new class of therapeutic and diagnostic reagents, more than fifteen years ago RNA and DNA aptamers were identified as binding molecules to numerous small compounds, proteins and rarely even to complete pathogen particles. Most aptamers were isolated from complex libraries of synthetic nucleic acids by a process termed SELEX based on several selection and amplification steps. Here we report the application of a new one-step selection method (MonoLEX) to acquire high-affinity DNA aptamers binding Vaccinia virus used as a model organism for complex target structures.

Results

The selection against complete Vaccinia virus particles resulted in a 64-base DNA aptamer specifically binding to orthopoxviruses as validated by dot blot analysis, Surface Plasmon Resonance, Fluorescence Correlation Spectroscopy and real-time PCR, following an aptamer blotting assay. The same oligonucleotide showed the ability to inhibit in vitro infection of Vaccinia virus and other orthopoxviruses in a concentration-dependent manner.

Conclusion

The MonoLEX method is a straightforward procedure as demonstrated here for the identification of a high-affinity DNA aptamer binding Vaccinia virus. MonoLEX comprises a single affinity chromatography step, followed by subsequent physical segmentation of the affinity resin and a single final PCR amplification step of bound aptamers. Therefore, this procedure improves the selection of high affinity aptamers by reducing the competition between aptamers of different affinities during the PCR step, indicating an advantage for the single-round MonoLEX method.

In vitro selection of human alpha-thrombin RNA aptamer using 4'-thioUTP and 4'-thioCTP

We synthesized 4'-thioUTP (1) and 4'-thioCTP (2) with the aim of developing new NTP analogs for in vitro selection. Since in vitro selection requires both in vitro transcription and reverse transcription, we examined the ability of 1 and 2 for in vitro selection by focusing on both steps. Incorporation of 1 and 2 by T7 RNA polymerase to give 4'-thioRNA proceeded well and was superior to those of the two sets of frequently used modified NTP analogs (2'-NH2dUTP and 2'-NH2dCTP, and 2'-FdUTP and 2'-FdCTP) for in vitro selection. In addition, reverse transcription of the resulting 4'-thioRNA into the complementary DNA in the presence of dNTPs also proceeded smoothly and precisely. With these successful results in hand, in vitro selection of human a-thrombin RNA aptamer using 1 and 2 is in progress.

Screening of modified DNA aptamers that recognize DNA secondary structure

We attempted to utilize in vitro selection techniques to develop modified DNA aptamers that are specific for DNA secondary structure including a single-mismatch base pair. For the selection, two kinds of random modified DNA library were prepared by an enzymatic method using modified 2'-deoxynucleoside 5'-triphosphates and KOD Dash DNA polymerase: one library consists of modified DNA including amino functionality and another consists of modified DNA including both hydroxypropynyl and guanidium functionalities.