Fluorescence enhancement of Carbendazim in the presence of cyclodextrins and micellar media: a reappraisal

This study focuses on the spectrofluorimetric behavior of the pesticide carbendazim in the presence of selected organized assemblies and also on their potential analytical applications. The relatively weak fluorescence emission band of carbendazim is significantly enhanced by micellar media formed by sodium dodecyl sulfate, hexadecyltrimethylammonium bromide, hexadecyltrimethylammonium chloride, and decyltrimethylammonium bromide. The influence of the surfactant structures, concentrations, and working experimental conditions on the fluorescence spectra of carbendazim was thoroughly evaluated and discussed. Although the interaction of carbendazim with different cyclodextrins is rather weak, it was corroborated that the fluorescence intensity of this compound in the presence of (2-hydroxy)propyl beta-cyclodextrin is increased by a factor of two. Among the studied organized media, the cationic surfactant hexadecyltrimethylammonium bromide produced the largest signals for the compound of interest. Consequently, the optimal working conditions for the spectrofluorimetric determination of carbendazim in the presence of the latter detergent were analyzed, concluding that previous literature reports should be reconsidered.

Disposable biosensor test for organophosphate and carbamate insecticides in milk

A highly sensitive and rapid biosensor test based on disposable screen-printed thick-film electrodes was developed, which is suitable for monitoring organophosphate and carbamate residues in foods of animal origin with increased fat contents such as milk. The wild-type enzyme was combined with three engineered variants of Nippostrongylus brasiliensis acetylcholinesterase (NbAChE), to obtain enhanced sensitivity. The sample pretreatment could be reduced to a minimum. There was no extraction or fat removal necessary. With the biosensor test paraoxon concentrations down to 1 microg/L could be detected in milk. The detection limit for carbaryl was 20 microg/L. Recovery rates for paraoxon and carbaryl in milk samples lay between 89 and 107%. Ten milk samples from local markets were tested both with the biosensor test and with standard chromatographic multiresidue methods. Two milk samples caused AChE inhibition rates of >50%. Accordingly, 4 microg/L tebufenpyrad, 4 microg/L tetraconazole, and 2 microg/L bifenthrin were detected in one of these milk samples. The other milk sample contained 2 microg/L tebufenpyrad.

The use of biomarkers of exposure of N,N-dimethylformamide in health risk assessment and occupational hygiene in the polyacrylic fibre industry

BACKGROUND

N,N-dimethylformamide (DMF) was recently prioritised for field studies by the National Toxicology Program based on the potency of its reproductive toxic effects.

AIMS

To measure accurately exposure to DMF in occupational settings.

METHODS

In 35 healthy workers employed in the polyacrylic fibre industry, N-methylformamide (NMF) and N-acetyl-S-(N-methylcarbamoyl)cysteine (AMCC) in urine, and N-methylcarbamoylated haemoglobin (NMHb) in blood were measured. Workplace documentation and questionnaire information were used to categorise workers in groups exposed to low, medium, and high concentrations of DMF.

RESULTS

All three biomarkers can be used to identify occupational exposure to DMF. However, only the analysis of NMHb could accurately distinguish between workers exposed to different concentrations of DMF. The median concentrations were determined to be 55.1, 122.8, and 152.6 nmol/g globin in workers exposed to low, medium, and high concentrations of DMF, respectively. It was possible by the use of NMHb to identify all working tasks with increased exposure to DMF. While fibre crimpers were found to be least exposed to DMF, persons washing, dyeing, or towing the fibres were found to be highly exposed to DMF. In addition, NMHb measurements were capable of uncovering working tasks, which previously were not associated with increased exposure to DMF; for example, the person preparing the fibre forming solution.

CONCLUSIONS

Measurement of NMHb in blood is recommended rather than measurement of NMF and AMCC in urine to accurately assess exposure to DMF in health risk assessment. However, NMF and AMCC are useful biomarkers for occupational hygiene intervention. Further investigations regarding toxicity of DMF should focus on highly exposed persons in the polyacrylic fibre industry. Additional measurements in occupational settings other than the polyacrylic fibre industry are also recommended, since the population at risk and the production volume of DMF are high.

Flow-through fluorescence-based optosensor with on-line solid-phase separation for the simultaneous determination of a ternary pesticide mixture

A rapid and selective method was developed for the simultaneous determination of 3 widely used pesticides, carbendazim (CBZ), carbofuran (CF), and benomyl (BNM). The method utilized a single continuous-flow, solid surface fluorometric multioptosensor implemented with a previous separation of the analytes on a minicolumn, placed just before the sensor, that was packed with the same solid support (C18 silica gel) as the flow-through cell. The separation was achieved because of the different kinetics of retention/elution of the pesticides on the solid support in the minicolumn, enabling the sequential arrival of the analytes at the sensing zone. With a single injection of the mixture, 2 of them were more strongly retained in the minicolumn (CF and BNM) while the other (CBZ) passed through the system towards the sensing material where it developed its fluorescence transitory signal. Then, CF and BNM were successively eluted from the solid support using 2 different eluting solutions, and they sequentially reached the sensing zone and developed their respective signals. A multiwavelength fluorescence detection mode was used, recording the signals of each pesticide at its maximum excitation/emission wavelength; therefore, the sensitivity was increased. The system was calibrated using a sample volume of 2000 microL. The linear dynamic range was 80-1400, 250-2400, and 150-2000 ng/mL with detection limits of 15, 68, and 35 ng/mL and relative standard deviation values of 3.5, 3.2, and 2.4% for CBZ, CF, and BNM, respectively. A recovery study was applied to spiked environmental water samples, and recoveries ranged from 96 to 104%.

Screening and evaluation of fruit samples for four pesticide residues

The occurrence of 4 pesticide residues, imidacloprid, carbendazim, methiocarb, and hexythiazox, was assessed in several fruits (oranges, tangerines, watermelons, and date plums) from the Valencian Community (Spain). A total of 227 samples--56 oranges, 134 tangerines, 13 watermelons, and 24 date plums--were taken from an agricultural cooperative representative of the area studied during 2001. The pesticides were determined by liquid chromatography/mass spectrometry after sample extraction with ethyl acetate and anhydrous sodium sulfate. Recoveries of 4 pesticides at 2 fortification levels (0.02 and 0.2 mg/kg), the lower of which was the quantification limit, ranged from 60 to 108%. Concentrations of imidacloprid, carbendazim, methiocarb, and hexythiazox ranged from 0.02 to 0.75 mg/kg in 184 samples (54 oranges, 119 tangerines, 3 watermelons, and 8 date plums). Nineteen samples contained methiocarb or hexythiazox residues that exceeded the maximum residue limits. Calculation of the estimated daily intakes of the 4 pesticides studied and their comparison with the Acceptable Daily Intakes established by the Food and Agriculture Organization of the World Health Organization demonstrated the safety of fruit consumption and showed the importance of monitoring for pesticide residues.

Monitoring of antifouling booster biocides in water and sediment from the port of Osaka, Japan

Concentrations of booster antifouling compounds in the port of Osaka, Japan were assessed. Concentrations of Sea-Nine 211 (4,5-dichloro-2-n-octyl-3-isothiazolone), thiabendazole (2-(4-thiazolyl)-benzimidazole), IPBC (3-iodo-2-propynyl butylcarbamate), Diuron (3,4-dichlorophenyl-N, N-dimethylurea), Irgarol 1051 (2-methylthio-4-t-butylamino-6-cyclopropylamino-s-triazine), and M1 (2-methylthio-4-t-butylamino-6-amino-s-triazine) in port water samples were in the range of <0.003-0.004 microg L(-1), <0.0008-0.020 microg L(-1), <0.0007-1.54 microg L(-1), <0.0008-0.267 microg L(-1), and <0.0019-0.167 microg L(-1), respectively. IPBC was not detected in the water samples, but the concentration of Diuron was higher than any previously reported. The concentrations of Sea-Nine 211, thiabendazole, Diuron, Irgarol 1051, and M1 in sediment samples were in the range of <0.04-2.4 microg kg(-1) dry, <0.08-1.2 microg kg(-1) dry, <0.64-1350 microg kg(-1) dry, <0.08-8.2 microg kg(-1) dry, and <0.18-2.9 microg kg(-1) dry, respectively. IPBC was again not detected. The levels of Sea-Nine 211, Diuron, and Irgarol 1051 in water and sediment samples were high in a poorly flushed mooring area for small and medium-hull vessels. Levels of Diuron and Irgarol 1051 were highest in summer. The concentration of Sea-Nine 211 in water increased between August and October 2002. Except for M1, increases in the levels of booster biocides in sediment were observed during the study period. The sediment-water partition (Kd) was calculated by dividing the concentrations in sediment by the concentrations in water. The Kd values for Sea-Nine 211, thiabendazole, Diuron, Irgarol 1051, and M1 were 690, 180, 2700, 300, and 870. The Kd value for these alternative compounds was lower than for TBT.

Determination of pirimicarb and endosulfan in commercial pesticide formulations by Fourier transform infrared spectrometry

A routine method based on Fourier transform infrared spectrometry was developed for the simultaneous determination of pirimicarb and endosulfan in commercially available pesticide formulations. The method is based on peak area absorbance measurements between 1362 and 1352 cm(-1), corrected with a baseline fixed at 1338 cm(-1), for pirimicarb and peak area absorbance measurements between 919 and 909 cm(-1) with a baseline fixed at 931 cm(-1) for endosulfan; chloroform solutions for analysis were obtained by direct dilution of emulsifiable concentrates or by solvent extraction from solid samples. Various extraction conditions and appropriate band selection were investigated, and interference studies were performed. Under the experimental conditions selected, limits of detection of 13 microg/g for pirimicarb and 150 microg/g for endosulfan were obtained that correspond to 0.13 and 1.6% (w/w), respectively, in commercial samples. Results from analyses of commercial samples by the developed method compared well with those obtained by a liquid chromatography reference method.

Combining solid-phase microextraction and on-line preconcentration-capillary electrophoresis for sensitive analysis of pesticides in foods

The combined use of solid-phase microextraction (SPME) and different on-line preconcentration strategies for ultrasensitive capillary electrophoresis-ultraviolet (CE-UV) analysis of five pesticides in a single run is investigated. Normal stacking mode (NSM), field-enhanced sample injection (FESI), and stacking with matrix removal (SWMR) are explored to increase the sensitivity of the CE-UV analysis of a selected group of pesticides (cyprodinil, cyromazine, pyrifenox, pirimicarb, and pyrimethanil). It could be observed that reverse polarity-stacking with matrix removal (RP-SWMR) provided the best results in terms of sensitivity (enhancement was up to 272-fold compared with normal injection). The separation buffer consisted of 0.4 mM cetyltrimethylammonium chloride (CTAC), 0.4 M acetic acid at pH 4 containing 5% v / v 2-propanol. This approach was then combined with SPME to determine the pesticides in water, apple, and orange juice. The combination of both preconcentration procedures allowed the determination of these pesticides at concentrations down to 2.5 microg / L in water and 3.1 microg / L in juices (i.e., levels well below the maximum residue limits allowed for these compounds). To our knowledge, this is the first report showing the great possibilities of the combined use of SPME, on-line sample preconcentration, and CE for pesticide analysis.

Liquid chromatographic determination of nineN-methylcarbamates in drinking water

A multi-residue method for the simultaneous extraction from drinking water using solid-phase extraction on LiChrolut EN [poly(styrene-divinylbenzene), PSDVB] and determination of nine N-methylcarbamate pesticides (NMCs) (aldicarb, its metabolites i.e. aldicarb sulfone and aldicarb sulfoxide and carbaryl, carbofuran, dioxacarb, ethiofencarb, methomyl and propoxur) using reversed-phase liquid chromatography was studied. A 1000-fold pre-concentration was achieved and the method was used for determination of the nine pesticides in water, with limits of detection in the range 3-15 ng L(-1). For all compounds the recoveries determined at the 0.1 and 1 microg L(-1) level generally ranged from 85 to 104% with relative standard deviations (RSD) of 1.4-8.8%.

Analytical methods used in the United Kingdom Wildlife Incident Investigation Scheme for the detection of animal poisoning by pesticides

The United Kingdom Wildlife Incident Investigation Scheme (WIIS) investigates cases of suspected poisoning of wildlife, honey bees, and companion animals by pesticides. Together with field inquiries and veterinary post-mortem examinations, the analytical procedures presented here provide a comprehensive approach to the investigation of these cases. The paper covers selection of animal tissues for analysis and methods suitable for the analysis of honey bees and for various types of bait. Seven multiresidue methods cover around 130 pesticides, and methods are also described for a further 8 compounds. These methods are currently used on samples submitted to the Scheme in England and Wales.

Evaluation of cyclodextrins modified with dichloro-, dimethyl-, and chloromethylphenylcarbamate groups as chiral stationary phases for capillary electrochromatography

Capillary electrochromatography using cyclodextrins modified with dichloro-, dimethyl-, and chloromethylcarbamate groups were used for the enantiomeric separation of standard analytes. The chiral selector was chemically bonded to aminopropylsilanized silica particles, and these chiral stationary phases (CSPs), mixed with aminopropylsilanized silica (1:1 wt:wt), were packed into 100-microm-i.d. fused-silica capillaries. The effect of the type of cyclodextrin, the nature and position of the substituents on the phenyl ring, and the binding mode of cyclodextrin phenylcarbamates onto the silica gel surface on the chiral recognition were studied. Experimental parameters such as organic solvent concentration were varied in order to better understand the mechanism contributing to the chiral recognition of these CSPs. Good enantioseparations were achieved for a racemic flavanone (FLA) and trans-cyclopropanedicarboxylic acid dianilide (CAD).

Effect of tank mixed adjuvants on the drift potential of phenmedipham formulations

The aim of this paper is to analyse the effect of adjuvants and formulations on drift. The spray liquids consisted of four adjuvants (Actirob 0.4 %, Tensiofix 0.2%, Breakthru 0.2%, Silwet L-77 0.1%) with water and with two formulations of Phenmediphame (C16H16N2O4, 4.45%): an emulsion-forming (EC) and a suspension concentrate (SC). A standard flat fan nozzle at a pressure of 3 bar was used. The droplet size spectrum of each combination was determined using a Malvern granulometer. The droplet size was characterized by the volume median diameter (VMD) and the percentage of spray volume contained in droplets <100 microm (%<100). The relative drift potential was measured for each combination of formulation and adjuvant in a wind-tunnel. This latter has a working section 2.0 m wide by 2.0 m high by 6.0 m long. The air-stream is drawn by a 1.2 m diameter axial flow fan, powered by a 22 kW electric motor. Wind speed was 5 m/s. Its uniformity was controlled by a three-dimensional sonic anemometer able to move on a linear translation beam placed in the tunnel cross section. The wind-tunnel was operated under ambient conditions and three repetitions were performed randomized in order to eliminate variations in temperature and humidity for each combination. The ground spray deposits were measured on glass fibber collectors using a fluorescent tracer dye (sodium fluorescein), at a concentration of 2.5 mg/l. The statistical analysis of the droplet spectrum showed that the Phenmediphame SC formulation generated droplets of higher size than the EC. The mean VMD values were respectively equal to 228+/-11 microm and 185+/-11 microm for these formulations. For SC formulation, Break-thru decreased the VMD while Tensiofix increased the %<100. This confirmed that the degree to which an adjuvant influences spray characteristics is very variable. The drift profiles produced by the different combinations were similar, but the relative drift potential was significantly different comparing SC and EC formulations: it respectively reached 0.8+/-0,08% and 1.2+/-0,08%, whatever the adjuvant used in the liquid. Clearly, when using a flat fan nozzle to spray Phenmediphame, the droplet size and the drift potential are mainly governed by the kind of formulation, even if an interaction between the formulation and the adjuvant exists.

Determination of n-methylcarbamates in foods

The multiresidue method using multisolvent extraction, SPE cleanup of the extract, HPLC with the use of OPA post-column reaction and fluorescence detection for the determination of N-methylcarbamate pesticides in food products was used. A matrix solid phase dispersion method of the isolation and extraction of carbamates was alternatively applied. In the introductory study 44 items of the food basket for the Czech Republic were analysed. In the major part of the studied samples, the considerable part of which was culinary treated, the concentration of the target carbamates was below the limit of the used detection method. In the concentration range of 10-100 microg/kg in the analysed samples of the studied analytes, aldicarb and its metabolites, e.g. methomyl and methiocarb were being found most frequently.

Development of an ELISA for the detection of the residues of the fungicide iprovalicarb

A competitive indirect enzyme-linked immunosorbent assay was developed for the fungicide iprovalicarb, using a polyclonal antibody produced against a hapten conjugated through the carboxyl group on the benzene ring to keyhole limpet hemocyanin. Under an optimized condition using a heterologous format, an IC(50) of 3.51 ng/mL and the lowest detection limit of 0.065 ng/mL were obtained. When the isopropoxy group was removed from the iprovalicarb structure for the synthesis of a hapten, the resulting hapten was not successful as an immunogen, indicating that the isopropyl moiety was an important epitope, as evidenced by the cross-reactivities of some structurally related compounds. When applied to the real crop and water samples, the recoveries were in the range of 80.52-144.70% (n = 4) and 72.11-100.43% (n = 4), respectively. Accordingly, this ELISA can be used as a useful method for monitoring iprovalicarb residues in crop and water samples.

Pesticide levels in surface waters in an agricultural-forestry basin in Southern Chile

Residues of five pesticides in surface water were surveyed during 2001 and 2003 in the Traiguen river basin in Southern Chile. Simazine, hexazinone, 2,4-D, picloram herbicides and carbendazim fungicide were selected through a pesticide risk classification index. Six sampling stations along the river were set up based on agricultural and forestry land use. The water sampling was carried out before and after the pesticide application periods and in correspondence to some rain events. Pesticides were analyzed by HPLC with DAD detection in a multiresidue analysis. During 2001, in the first sampling campaign (March), the highest concentrations of pesticides were 3.0 microg l(-1) for simazine and hexazinone and 1.8 microg l(-1) for carbendazim. In the second sampling (September), the highest concentration were 9.7 microg l(-1) for 2,4-D, 0.3 microg l(-1) for picloram and 0.4 microg l(-1) for carbendazim. In the last sampling period (December), samples indicated contamination with carbendazim fungicide at levels of up to 1.2 microg l(-1). In sampling carried out on May 2003, no pesticides were detected. In October 2003, the highest concentrations of pesticides were 4.5 microg l(-1) for carbendazim and 2.9 microg l(-1) for 2,4-D. Data are discussed in function of land use and application periods of the products, showing a clear seasonal pattern pollution in the Traiguen river. Risk assessment for these pesticides was calculated by using a risk quotient (RQ = PNEC/PEC). For picloram the calculated RQ < was 0, which indicates that no adverse effects may occur due to the exposure to this herbicide in the Traiguen river basin. For 2,4-D, simazine, hexazinone, carbendazim RQ > 1, meaning that adverse effects could occur and it is necessary to reduce pesticide exposure in surface waters. It is recommended to continue with a pesticide monitoring program and the implementation of ecotoxicological testing with local and standardized species in order to consider the probability of effects occurrence, with less uncertainty. Thus, it will be more feasible to make some recommendations to regulatory agencies regarding the pesticide use.

Contamination of honey by the herbicide asulam and its antibacterial active metabolite sulfanilamide

A number of antibacterial drugs (antibiotics) like sulfonamides, tetracyclines and streptomycin are used for the treatment of bacterial diseases in beehives. Yet, the finding of sulfanilamide residues in some 15 Swiss honeys out of some 350 samples could not be explained by such apicultural practice. Bees occasionally collect nectar from meadows treated with the herbicide asulam. Such honey is not only contaminated by asulam, but also by its degradation product sulfanilamide. This is the first report that the use of a herbicide causes the appearance of residues of an antibacterial active metabolite belonging to the category of sulfonamide drugs in food. The relevance of this finding lies in the fact that the use of the herbicide asulam might cause unacceptable residue levels of sulfanilamide in a product fbr human consumption.

Simple and rapid assay for analyzing residues of carbamate insecticides in bovine milk: hot water extraction followed by liquid chromatography–mass spectrometry

A simple, specific and rapid procedure for determining six largely used carbamate insecticides in bovine whole milk is here presented. This method is based on the matrix solid-phase dispersion technique with heated water as extractant followed by liquid chromatography (LC)-mass spectrometry (MS) equipped with a single quadrupole and an electrospray ion source. Target compounds were extracted from milk by water heated at 90 degrees C. After acidification and filtration, 0.2 mL of the aqueous extract was injected in the LC column. MS data acquisition was performed in the selected ion-monitoring mode, selecting three ions for each target compound. Heated water appeared to be an excellent extractant, since absolute recovery data ranged between 76 and 104% with R.S.D. not larger than 8%. Using butocarboxim (an obsolete carbamate insecticide) as surrogate internal standard, the accuracy of the analysis at three spike levels varied between 85 and 105% with R.S.D. not larger than 9%. On the basis of a signal-to-noise ratio of 10, limits of quantification were estimated to range between 3 ppb (propoxur) and 8 ppb (pirimicarb). The effects of temperature, volume and flow rate of the extractant on the analyte recovery were studied.

Multiresidue method for N-methyl carbamates and metabolite pesticide residues at the parts-per-billion level in selected representative commodities of fruit and vegetable crop groups

A reversed-phase liquid chromatographic method with both fluorescence and mass spectrometric detection is presented for the determination of 13 parent N-methyl carbamate pesticides and their metabolites, as well as piperonyl butoxide, for a total of 24 compounds in selected fruits and vegetables. The commodities chosen were of special concern to the U.S. Environmental Protection Agency (EPA) because they had the least amount of monitoring data for dietary exposure estimates used in risk assessment. The method is based on a judicious selection of procedures from U.S. Food and Drug Administration sources such as the Pesticide Analytical Manual (Volume I), and Laboratory Information Bulletins, plus additional material from the chemical literature combined in a manner to recover the N-methyl carbamates and their metabolites at the 1 microg/kg or 1 part-per-billion level. The method uses an acetone extraction, followed by an aminopropyl solid-phase extraction cleanup. Determination of residues is by RP-LC, in which the liquid chromatograph is interfaced with either a fluorescence or a mass spectrometric detector. The method is designed so that a set of 6 samples can be prepared in 1 working day for overnight instrumental analysis. Recovery data are presented from analyses of selected commodities in some of EPA's fruit and vegetable crop groupings. A table listing relative retention times is presented for the N-methyl carbamates and their metabolites.

Determination of residues of propamocarb in wine by liquid chromatography-electrospray mass spectrometry with direct injection

A simple, sensitive and reliable liquid chromatography-mass spectrometry method with direct injection of diluted samples is reported for the determination of propamocarb residues in wine. Red and white wines were diluted 40- and 20-fold, respectively, using water. Liquid chromatography was performed with a mobile-phase gradient and detection was by electrospray mass spectrometry in a positive ionization mode. Propamocarb was detected as the protonated molecular species at m/z 189. Using matrix-matched calibrant solutions, a calibrated range equivalent to 0.05-2.0 mg kg(-1) in red and white wines and limits of detection of 0.025 mg kg(-1) for white wine and of 0.05 mg kg(-1) for red wine (0.00125 microg ml(-1) of sample solution injected) were readily achievable. Recovery of propamocarb hydrochloride from wine spiked before dilution was in the range 91-115%. The chromatograms were free of isobaric interferences. In a small wine survey (72 samples), no residues of propamocarb were detected above 0.1 mg kg(-1).

N-methyl carbamate concentrations and dietary intake estimates for apple and grape juices available on the retail market in Canada

Infants and young children consume fruit juices and drinks at rates exceeding those of older children and adults. Carbamate pesticides are known to be used on a broad spectrum of crops, including orchard and vine crops such as apples and grapes. Concern over potential exposure to these acutely toxic pesticides by infants and young children has increased in the last decade. Liquid chromatography with fluorescence detection was used to determine the concentrations of seven N-methyl carbamates and three transformation products in domestic and imported apple and grape juices collected across Canada. Carbaryl was the most frequently (58.6%) detected N-methyl carbamate in juice samples studied. It was observed more frequently in grape juices than in apple or mixed juices. Oxamyl and methomyl were detected in apple juice samples, although they were below detection limits in all grape and mixed juice samples analysed. Maximum levels of carbaryl, methomyl and oxamyl were 93, 6.7 and 4.6 ng ml(-1), respectively. All other analytes were not present in any juice sample at concentrations above the method detection limit (0.3 ng ml(-1)). In all cases, N-methyl carbamate residues were well below the maximum residue limit established for apples and grapes in the Canadian Food and Drug Regulations. No estimated dietary intakes were above the acceptable daily intakes in any age-sex category, where an acceptable daily intake has been proposed. Carbaryl short-term intake estimates were calculated and all were below the proposed acute reference doses.

Long-term effects of fenoxycarb on two mayfly species in artificial indoor streams

The effects of the juvenile hormone analog fenoxycarb (CAS No. 72490-01-8) were investigated in artificial indoor streams. The results from aufwuchs and two mayfly species (Rhithrogena semicolorata and Ephemerella ignita) are presented. Four concentrations ranging from 0.05 to 50 microg/L (with a spacing factor of 10) were tested. Fenoxycarb disappeared rapidly from the water phase (DT(50) approximately 5 days in the highest concentration, less in the other concentrations). Physico-chemical parameters and aufwuchs were not affected by fenoxycarb. The mayfly R. semicolorata, introduced at the start of the experiment, was affected by treatments of 5 and 50 microg/L. For the larvae in the streams a LC(50) of 3.3 microg/L and for the larvae in the enclosures a LC(50) of 2.5 microg/L were calculated. The second species (E. ignita) was introduced 72 days after the application, at which time no fenoxycarb was detectable in the water of the streams (limit of detection of 0.5 ng/L). The emergence of E. ignita was affected in the highest treatment (50 microg/L). Ninety percent of the emerged imagoes showed morphological abnormalities at the abdomen.

Chiral separation of Tamsulosin isomers by HPLC using cellulose Tris (3,5-dimethhylphenylcarbamate) as a chiral stationary phase

A high-performance liquid chromatographic (HPLC) method was developed for the chiral separation of an antagonist of alpha1A adrenoceptors, tamsulosin and its S-isomer. Baseline separation of the isomers was achieved within 35 min on a CHIRALCEL OD-RH column with a binary solvent mixture of 50 mmol l(-1) KPF6-acetonitrile (v/v (70:30), pH 5.0) as the optimized mobile phase. The detection limits and quantification limits of both R-isomer and S-isomer were 0.11 and 0.44 ng, respectively. The R.S.D. values of peak-area for the two isomer were 0.42% (of peak-height: 0.77%) for R-isomer and 0.64% (of peak-height:0.92%) for S-isomer (n = 5).

Liquid chromatographic determination of iprovalicarb in cabbage and soil

A method was developed for the determination of iprovalicarb, a new carbamic acid-amino acid fungicide, by liquid chromatography with UV detection. The method uses a reversed-phase C18 column with lambdamax at 215 nm and methanol-water (72 + 25, v/v) as the mobile phase. Cabbage head and leaves fortified with iprovalicarb were extracted with acetone. Partitioning of the fungicide into dichloromethane was followed by column cleanup on neutral alumina. Fortified soil samples were extracted with acetonitrile, and the extract was subjected to column cleanup. The average recoveries of iprovalicarb from cabbage head, leaves, and soil were 86.50, 82.0, and 84.3%, respectively, for fortification levels of 1 and 2 microg/g for cabbage head and leaves and 2 and 4 microg/g for soil.

JLK isocoumarin inhibitors: Selective ?-secretase inhibitors that do not interfere with notch pathway in vitro or in vivo

gamma-Secretase activity is involved in the generation of Abeta and therefore likely contributes to the pathology of Alzheimer's disease. Blocking this activity was seen as a major therapeutic target to slow down or arrest Abeta-related AD progression. This strategy seemed more doubtful when it was established that gamma-secretase also targets other substrates including Notch, a particularly important transmembrane protein involved in vital functions, at both embryonic and adulthood stages. We have described previously new non-peptidic inhibitors able to selectively inhibit Abeta cellular production in vitro without altering Notch pathway. We show here that in vivo, these inhibitors do not alter the Notch pathway responsible for somitogenesis in the zebrafish embryo. In addition, we document further the selectivity of JLK inhibitors by showing that, unlike other described gamma-secretase inhibitors, these agents do not affect E-cadherin processing. Finally, we establish that JLKs do not inhibit beta-site APP cleaving enzymes (BACE) 1 and BACE2, alpha-secretase, the proteasome, and GSK3beta kinase. Altogether, JLK inhibitors are the sole agents to date that are able to prevent Abeta production without triggering unwanted cleavages of other proteins.

Soil photolysis of herbicides in a moisture- and temperature-controlled environment

The problem of maintaining the moisture content of samples throughout the course of a soil photolysis study is addressed. The photolytic degradations of asulam, triclopyr, acifluorfen, and atrazine were independently compared in air-dried soils and in moist (75% field moisture capacity at 0.33 bar) soils maintained at initial conditions through the use of a specially designed soil photolysis apparatus. Each pesticide was applied at 5 microg/g. The exposure phase extended from 144 to 360 h, depending on the half-life of the compound. A dark control study, also using moist and air-dried soils, was performed concurrently at 25 degrees C. The results showed significant differences in half-life. The dissipations generally demonstrated a strong dependence on moisture. In most cases, photolytic degradation on air-dried soil was longer than in the moist dark control soils. Half-lives in dry soil were 2-7 times longer, and in the case of atrazine, the absence of moisture precluded significant degradation. Moist soil experiments also tended to correlate more strongly with linear first-order degradations. The dark control experiments also demonstrated shorter half-lives in moist soil. Moisture was also observed to affect the amount of degradate formed in the soils.