Integrated cell isolation and polymerase chain reaction analysis using silicon microfilter chambers

Separation of model mixtures of epsilon-globin positive fetal nucleated red blood cells and anucleate erythrocytes using a microfluidic device

Microfluidic devices are capable of separating microparticles and cells. We developed and tested the efficiency of silicon cross-flow microfilters for the separation of primitive fetal nucleated red blood cells (FNRBCs) and adult anucleate red blood cell (AARBCs) from model mixtures. Stepwise improvements over three generations of device design resulted in an increasing trend in the recovery of FNRBCs. We obtained a recovery of FNRBCs (74.0+/-6.3%, p<0.05, n=5) using the third generation device, with a depletion of 46.5+/-3.2% AARBCs from the cell mixture. The purity of FNRBCs in the enriched fraction was enhanced by a factor of 1.7-fold.

A self-contained fully-enclosed microfluidic cartridge for lab on a chip

We describe a self-contained fully-enclosed cartridge for lab-on-a-chip applications where sample and reagents can be applied sequentially as is performed in a heterogeneous immunoassay, or nucleic acid extraction. Both the self-contained and fully-enclosed features of the cartridge are sought to ensure its safe use in the field by unskilled staff. Simplicity in cartridge design and operation is obtained via adopting a valveless concept whereby reagents are stored and used in the form of liquid plugs isolated by air spacers around a fluidic loop. Functional components integrated in the loop include a microfluidic chip specific to the target application, a novel peristaltic pump to displace the liquid plugs, and a pair of removable tubing segments where one is used to introduce biological sample and while the other is to collect eluant. The novel pump is fabricated through soft-lithography technique and works by pinching a planar channel under stainless-steel ball bearings that have been magnetically loaded. The utility of the cartridge is demonstrated for automated extraction and purification of nucleic acids (DNA) from a cell lysate on a battery-operated portable system. The cartridge shown here can be further extended to sample-in-answer-out diagnostic tests.

Cell culture on MEMS platforms: a review

Microfabricated systems provide an excellent platform for the culture of cells, and are an extremely useful tool for the investigation of cellular responses to various stimuli. Advantages offered over traditional methods include cost-effectiveness, controllability, low volume, high resolution, and sensitivity. Both biocompatible and bio-incompatible materials have been developed for use in these applications. Biocompatible materials such as PMMA or PLGA can be used directly for cell culture. However, for bio-incompatible materials such as silicon or PDMS, additional steps need to be taken to render these materials more suitable for cell adhesion and maintenance. This review describes multiple surface modification strategies to improve the biocompatibility of MEMS materials. Basic concepts of cell-biomaterial interactions, such as protein adsorption and cell adhesion are covered. Finally, the applications of these MEMS materials in Tissue Engineering are presented.

Design, fabrication and characterization of nano-filters in silicon microfluidic channels based on MEMS technology

Since most clinical assays are performed on cell-free serum or plasma, micro-analytical systems for blood tests require integrated on-chip microfluidics for the isolation of plasma or serum from crude blood samples. In this paper, we present a crossflow filtration method using novel silicon nano-filters for plasma separation. The microfluidic chip is made of a silicon substrate containing micropillar arrays, feed channels, side channels and nano-gap structures, sealed with a PDMS-glass compound cover. The design of the silicon filtration structures were optimized using numerical analysis and the optimal MEMS fabrication procedures were obtained. The filtration structures including nano-filters were characterized using SEM and subsequently used to isolate plasma from whole blood in a continuous manner. Compared with micro-gap structures in silicon microfluidic channels, the nano-gap structures have been used to separate plasma from whole blood samples with higher selectivity, where a maximum plasma selectivity of 97.7% has been obtained. Common problems of clogging and jamming in filtration applications have seldom been noticed in our device. The presented microfluidic filtration device for plasma isolation could be integrated into microTAS for point-of-care diagnostics in the near future.

Detection of enteropathogenic Escherichia coli by microchip capillary electrophoresis

There is always a need to detect the presence of microorganisms, either as contaminants in food and pharmaceutical industries or bioindicators for disease diagnosis. Hence, it is important to develop efficient, rapid, and simple methods to detect microorganisms. Traditional culturing method is unsatisfactory due to its long incubation time. Molecular methods, although capable of providing a high degree of specificity, are not always useful in providing quick tests of presence or absence of microorganisms. Microchip elec-trophoresis has been recently employed to address problems associated with the detection of microorganisms due to its high versatility, selectivity, sensitivity, and short analysis times. In this work, the potential of PDMS-based microchip electrophoresis in the identification and characterization of microorganism was evaluated. Enteropathogenic E. coli (EPEC) was selected as the model microorganism. To obtain repeat-able separations, sample pretreatment was found to be essential. Microchip electrophoresis with laser-induced fluorescence detection could potentially revolutionize certain aspects of microbiology involving diagnosis, profiling of pathogens, environmental analysis, and many others areas of study.

Lab-on-a-chip technologies for proteomic analysis from isolated cells

Lab-on-a-chip systems offer a versatile environment in which low numbers of cells and molecules can be manipulated, captured, detected and analysed. We describe here a microfluidic device that allows the isolation, electroporation and lysis of single cells. A431 human epithelial carcinoma cells, expressing a green fluorescent protein-labelled actin, were trapped by dielectrophoresis within an integrated lab-on-a-chip device containing saw-tooth microelectrodes. Using these same trapping electrodes, on-chip electroporation was performed, resulting in cell lysis. Protein release was monitored by confocal fluorescence microscopy.

Enhanced microfiltration devices configured with hydrodynamic trapping and a rain drop bypass filtering architecture for microbial cells detection

Ultra-fine (<1 microm) microfilters are required to effectively trap microbial cells. We designed microfilters featuring a rain drop bypass architecture, which significantly reduces the likelihood of clogging at the cost of limited cell loss. The new rain drop bypass architecture configuration has a substantially lower pressure drop and allows a better efficiency in trapping protozoan cells (Cryptosporidium parvum and Giardia lamblia) in comparison to our previous generation of a microfilter device. A modified version displaying sub-micron filter gaps was adapted to trap and detect bacterial cells (Escherichia coli), through a method of cells labeling, which aims to amplify the fluorescence signal emission and therefore the sensitivity of detection.

Silicon-based microfilters for whole blood cell separation

This paper reports on the comparison analysis of four main types of silicon-based microfilter for isolation of white blood cells (WBCs) from red blood cells (RBCs) in a given whole blood. The microfilter designs, namely, weir, pillar, crossflow, and membrane, all impose the same cut-off size of 3.5 mum to selectively trap WBCs. Using human whole blood, the microfilters have been characterized and compared for their blood handling capacity, WBCs trapping efficiency and RBCs passing efficiency. Based on the experimental results, the crossflow microfilter is superior and can be integrated with downstream components for on-chip genomic analysis.

Cell culture models in microfluidic systems

Microfluidic technology holds great promise for the creation of advanced cell culture models. In this review, we discuss the characterization of cell culture in microfluidic systems, describe important biochemical and physical features of the cell microenvironment, and review studies of microfluidic cell manipulation in the context of these features. Finally, we consider the integration of analytical elements, ways to achieve high throughput, and the design constraints imposed by cell biology applications.

Ultrasensitive PCR and real-time detection from human genomic samples using a bidirectional flow microreactor

In this paper we present a reliable bidirectional flow DNA amplification microreactor for processing real-world genomic samples. This system shares the low-power thermal responsiveness of a continuous flow reactor with the low surface area to volume ratio character of stationary reactors for reducing surface inhibitory effects. Silanization with dimethyldichlorosilane in combination with dynamic surface passivation was used to enhance PCR compatibility and enable efficient amplification. For real-time fragment amplification monitoring we have implemented an epimodal fluorescent detection capability. The passivated bidirectional flow system was ultrasensitive, achieving an RNase P gene detection limit of 24 human genome copies with a reaction efficiency of 77%. This starts to rival the performance of a conventional real-time PCR instrument with a reaction efficiency of 93% and revitalizes flow-through PCR as a viable component of lab on a chip DNA analysis formats.

Continuous blood cell separation by hydrophoretic filtration

We propose a new hydrophoretic method for continuous blood cell separation using a microfluidic device composed of slanted obstacles and filtration obstacles. The slanted obstacles have a larger height and gap than the particles in order to focus them to a sidewall by hydrophoresis. In the successive structure, the height and gap of the filtration obstacles with a filtration pore are set between the diameters of small and large particles, which defines the critical separation diameter. Accordingly, the particles smaller than the criterion freely pass through the gap and keep their focused position. In contrast, the particles larger than the criterion collide against the filtration obstacle and move into the filtration pore. The microfluidic device was characterized with polystyrene beads with a minimum diameter difference of 7.3%. We completely separated polystyrene microbeads of 9 and 12 microm diameter with a separation resolution of approximately 6.2. This resolution is increased by 6.4-fold compared with our previous separation method based on hydrophoresis (S. Choi and J.-K. Park, Lab Chip, 2007, 7, 890, ref. 1). In the isolation of white blood cells (WBCs) from red blood cells (RBCs), the microfluidic device isolated WBCs with 210-fold enrichment within a short filtration time of approximately 0.3 s. These results show that the device can be useful for the binary separation of a wide range of biological particles by size. The hydrophoretic filtration as a sample preparation unit offers potential for a power-free cell sorter to be integrated into disposable lab-on-a-chip devices.

Total nucleic acid analysis integrated on microfluidic devices

The design and integration of microfluidic devices for on-chip amplification of nucleic acids from various biological samples has undergone extensive development. The actual benefit to the biological community is far from clear, with a growing, but limited, number of application successes in terms of a full on-chip integrated analysis. Several advances have been made, particularly with the integration of amplification and detection, where amplification is most often the polymerase chain reaction. Full integration including sample preparation remains a major obstacle for achieving a quantitative analysis. We review the recently described devices incorporating in vitro gene amplification and compare devices relative to each other and in terms of fully achieving a miniaturised total analysis system (micro-TAS).

Cell loss in integrated microfluidic device

Cell loss during sample transporting from macro-components to micro-components in integrated microfluidic devices can considerably deteriorate cell detection sensitivity. This intrinsic cell loss was studied and effectively minimized through (a) increasing the tubing diameter connecting the sample storage and the micro-device, (b) applying a hydrodynamic focusing approach for sample delivering to reduce cells contacting and adhesion on the walls of micro-channel and chip inlet; (c) optimizing the filter design with a zigzag arrangement of pillars (13 microm in chamber depth and 0.8 microm in gap) to prolong the effective filter length, and iv) the use of diamond shaped pillar instead of normally used rectangular shape to reduce the gap length between any two given pillar (i.e. pressure drop) at the filter region. Cell trapping and immunofluorescent detection of 12 Giardia lamblia and 12 Cryptosporidium parvum cells in 150 microl solution and 50 MCF-7 breast cancer cells in 150 microl solution was completed within 15 min with trapping efficiencies improved from 79+/-11%, 50.8+/-5.5% and 41.3+/-3.6% without hydrodynamic focusing, respectively, to 90.8+/-5.8%, 89.8+/-16.6% and 77.0+/-9.2% with hydrodynamic focusing.

Multichannel PCR-CE microdevice for genetic analysis

We have developed a fully integrated multichannel polymerase chain reaction-capillary electrophoresis (PCR-CE) microdevice with nanoliter reactor volumes for highly parallel genetic analyses. Resistance temperature detectors and heaters made out of Ti/Pt are integrated on the microchip using a scalable radial design to provide precise temperature control of the four parallel PCR-CE reactor systems. Heating rates of >15 degrees C s(-1) and cooling rates of >10 degrees C s(-1) allow cycle times of 50 s and 30 complete PCR cycles in <27 min. PDMS membrane valves control and localize PCR reagents in the 380-nL reactors. By directly integrating PCR reactors with the CE separation system, efficient coupling of amplification with separation is achieved. The microdevice demonstrates good amplification uniformity and sensitivity down to 10 initial template copies in the 380-nL reactor (approximately 43 aM) with signal-to-noise ratio greater than 10. Parallel PCR-CE multiplex amplification and genetic analyses of four different samples with (1) both M13mp18 control template and E. coli K12 cells, (2) only M13mp18 template, (3) only E. coli K12 cells, and (4) negative control are completed in less than 30 min in a single run.

A novel 3D mammalian cell perfusion-culture system in microfluidic channels

Mammalian cells cultured on 2D surfaces in microfluidic channels are increasingly used in drug development and biological research applications. These systems would have more biological or clinical relevance if the cells exhibit 3D phenotypes similar to the cells in vivo. We have developed a microfluidic channel based system that allows cells to be perfusion-cultured in 3D by supporting them with adequate 3D cell-cell and cell-matrix interactions. The maximal cell-cell interaction was achieved by perfusion-seeding cells through an array of micropillars; and 3D cell-matrix interactions were achieved by a polyelectrolyte complex coacervation process to form a thin layer of matrix conforming to the 3D cell shapes. Carcinoma cell lines (HepG2, MCF7), primary differentiated (hepatocytes) and primary progenitor cells (bone marrow mesenchymal stem cells) were perfusion-cultured for 72 hours to 1 week in the microfluidic channel, which preserved their 3D cyto-architecture and cell-specific functions or differentiation competence. This transparent 3D microfluidic channel-based cell culture system also allows direct optical monitoring of cellular events for a wide range of applications.

Microfabricated solenoids and Helmholtz coils for NMR spectroscopy of mammalian cells

NMR-microprobes based on solenoids and Helmholtz coils have been microfabricated and NMR-spectra of mammalian cells have successfully been taken. The microfabrication technology developed for these probes consists of three electroplated copper levels for low resistance coils and three SU-8 layers for the integration of microchannels. This technology allows fabricating solenoids, Helmholtz and planar coils on the same wafer. The coils have inner diameters in the range of 160 to 400 microm and detection volumes of 5 to 22 nL. The solenoid and Helmholtz coils show improved RF-field characteristics compared to a planar coil fabricated with the same process. The fabricated solenoid has a particularly low resistance of only 0.46 Omega at 300 MHz. Moreover, it is very sensitive and has a very uniform RF-field, but shows large line width. The Helmholtz coils are slightly less sensitive, but display a far narrower line width, and are therefore a good compromise. With a Helmholtz coil, a SNR of 620 has been measured after one scan on 9 nL pure water. An NMR-microprobe based on a Helmholtz coil has also been used to take spectra of CHO cells that have been concentrated in the sensitive region of the coil with a mechanical filter integrated into the channel.

Perfusion in Microfluidic Cross-Flow: Separation of White Blood Cells from Whole Blood and Exchange of Medium in a Continuous Flow

We describe a microfluidic technique for separation of particles and cells and a device that employs this technique to separate white blood cells (WBC) from whole human blood. The separation is performed in cross-flow in an array of microchannels with a deep main channel and large number of orthogonal, shallow side channels. As a suspension of particles advances through the main channel, a perfusion flow through the side channels gradually exchanges the medium of the suspension and washes away particles that are sufficiently small to enter the shallow side channels. The microfluidic device is tested with a suspension of polystyrene beads and is shown to efficaciously exchange the carrier medium while retaining all beads. In tests with whole human blood, the device is shown to reduce the content of red blood cells (RBC) by a factor of approximately 4000 with retention of 98% of WBCs. The ratio between WBCs and RBCs reached at an outlet of the device is 2.4 on average. The device is made of a single cast of poly(dimethylsiloxane) sealed with a cover glass and is simple to fabricate. The proposed technique of separation by perfusion in continuous cross-flow could be used to enrich rare populations of cells based on differences in size, shape, and deformability.

PCR in Integrated Microfluidic Systems

Miniaturized integrated DNA analysis systems offer the potential to provide unprecedented advances in cost and speed relative to current benchtop-scale instrumentation by allowing rapid bioanalysis assays to be performed in a portable self contained device format that can be inexpensively mass-produced. The polymerase chain reaction (PCR) has been a natural focus of many of these miniaturization efforts, owing to its capability to efficiently replicate target regions of interest from small quantities template DNA. Scale-down of PCR has proven to be particularly challenging, however, due to an unfavorable combination of relatively severe temperature extremes (resulting in the need to repeatedly heat minute aqueous sample volumes to temperatures in the vicinity of 95°C with minimal evaporation) and high surface area to volume conditions imposed by nanoliter reactor geometries (often leading to inhibition of the reaction by nonspecific adsorption of reagents at the reactor walls). Despite these daunting challenges, considerable progress has been made in the development of microfluidic devices capable of performing increasingly sophisticated PCR-based bioassays. This chapter reviews the progress that has been made to date and assesses the outlook for future advances.

DNA-based bioanalytical microsystems for handheld device applications

This article reviews and highlights the current development of DNA-based bioanalytical microsystems for point-of-care diagnostics and on-site monitoring of food and water. Recent progresses in the miniaturization of various biological processing steps for the sample preparation, DNA amplification (polymerase chain reaction), and product detection are delineated in detail. Product detection approaches utilizing "portable" detection signals and electrochemistry-based methods are emphasized in this work. The strategies and challenges for the integration of individual processing module on the same chip are discussed.

PCR microfluidic devices for DNA amplification

The miniaturization of biological and chemical analytical devices by micro-electro-mechanical-systems (MEMS) technology has posed a vital influence on such fields as medical diagnostics, microbial detection and other bio-analysis. Among many miniaturized analytical devices, the polymerase chain reaction (PCR) microchip/microdevices are studied extensively, and thus great progress has been made on aspects of on-chip micromachining (fabrication, bonding and sealing), choice of substrate materials, surface chemistry and architecture of reaction vessel, handling of necessary sample fluid, controlling of three or two-step temperature thermocycling, detection of amplified nucleic acid products, integration with other analytical functional units such as sample preparation, capillary electrophoresis (CE), DNA microarray hybridization, etc. However, little has been done on the review of above-mentioned facets of the PCR microchips/microdevices including the two formats of flow-through and stationary chamber in spite of several earlier reviews [Zorbas, H. Miniature continuous-flow polymerase chain reaction: a breakthrough? Angew Chem Int Ed 1999; 38 (8):1055-1058; Krishnan, M., Namasivayam, V., Lin, R., Pal, R., Burns, M.A. Microfabricated reaction and separation systems. Curr Opin Biotechnol 2001; 12:92-98; Schneegabeta, I., Köhler, J.M. Flow-through polymerase chain reactions in chip themocyclers. Rev Mol Biotechnol 2001; 82:101-121; deMello, A.J. DNA amplification: does 'small' really mean 'efficient'? Lab Chip 2001; 1: 24N-29N; Mariella, Jr. R. MEMS for bio-assays. Biomed Microdevices 2002; 4 (2):77-87; deMello AJ. Microfluidics: DNA amplification moves on. Nature 2003; 422:28-29; Kricka, L.J., Wilding, P. Microchip PCR. Anal BioAnal Chem 2003; 377:820-825]. In this review, we survey the advances of the above aspects among the PCR microfluidic devices in detail. Finally, we also illuminate the potential and practical applications of PCR microfluidics to some fields such as microbial detection and disease diagnosis, based on the DNA/RNA templates used in PCR microfluidics. It is noted, especially, that this review is to help a novice in the field of on-chip PCR amplification to more easily find the original papers, because this review covers almost all of the papers related to on-chip PCR microfluidics.

Clinical evaluation of micro-scale chip-based PCR system for rapid detection of hepatitis B virus

The polymerase chain reaction (PCR) is widely used to amplify a small amount of DNA in samples for genetic analysis. Rapid and accurate amplification is prerequisite for broad applications including molecular diagnostics of diseases, food safety, and biological warfare tests. We have developed a rapid real-time micro-scale chip-based PCR system, which consists of six individual thermal cycling modules capable of independent control of PCR protocols. The PCR volume is 1 microl and it takes less than 20 min to complete 40 thermal cycles. To test utility of a chip-based PCR system as a molecular diagnostic device, we have conducted the first large-scale clinical evaluation study. Three independent clinical evaluation studies (n = 563) for screening the hepatitis B virus (HBV) infection, the most popular social epidemic disease in Asia, showed an excellent sensitivity, e.g. 94%, and specificity, e.g. 93%, demonstrating micro-scale chip-based PCR can be applied in molecular diagnostics.

Isolation of plasma from whole blood using planar microfilters for lab-on-a-chip applications

Researchers are actively developing devices for the microanalysis of complex fluids, such as blood. These devices have the potential to revolutionize biological analysis in a manner parallel to the computer chip by providing very high throughput screening of complex samples and massively parallel bioanalytical capabilities. A necessary step performed in clinical chemistry is the isolation of plasma from whole blood, and effective sample preparation techniques are needed for the development of miniaturized clinical diagnostic devices. This study demonstrates the use of passive, operating entirely on capillary action, transverse-flow microfilter devices for the microfluidic isolation of plasma from whole blood. Using these planar microfilters, blood can be controllably fractionated with minimal cell lysis. A characterization of the device performance reveals that plasma filter flux is dependent upon the wall shear rate of blood in the filtration channel, and this result is consistent with macroscale blood filtration using microporous membranes. Also, an innovative microfluidic layout is demonstrated that extends device operation time via capillary action from seconds to minutes. Efficiency of these microfilters is approximately three times higher than the separation efficiencies predicted for microporous membranes under similar conditions. As such, the application of the microscale blood filtration designs used in this study may have broad implications in the design of lab-on-a-chip devices, as well as the field of separation science.

Molecular diagnostics by microelectronic microchips

Molecular diagnostics is being revolutionized by the development of highly advanced technologies for DNA and RNA testing. One of the most important challenges is the integration of microelectronics to microchip-based nucleic acid technologies. The specific characteristics of these microsystems make the miniaturization and automation of any step of a molecular diagnostic procedure possible. This review describes the application of microelectronics to all the processes involved in a genetic test, particularly to sample preparation, DNA amplification and sequence variation detection.

Micropillar array chip for integrated white blood cell isolation and PCR

We report the fabrication of silicon chips containing a row of 667 pillars, 10 by 20 microm in cross-section, etched to a depth of 80 microm with adjacent pillars being separated by 3.5 microm. The chips were used to separate white blood cells from whole blood in less than 2 min and for subsequent PCR of a genomic target (eNOS). Chip fluid dynamics were validated experimentally using CoventorWare microfluidic simulation software. The amplicon concentrations were determined using microchip capillary electrophoresis and were >40% of that observed in conventional PCR tubes for chips with and without pillars. Reproducible on-chip PCR was achieved using white blood cell preparations isolated from whole human blood pumped through the chip.

Mutation detection using ligase chain reaction in passivated silicon-glass microchips and microchip capillary electrophoresis

The ligase chain reaction (LCR) following PCR is one of the most sensitive and specific methods for detecting mutations, especially single nucleotide polymorphisms (SNPs). Performing LCR in microchips remains a challenge because of the inhibitory effect of the internal surfaces of silicon-glass microchips. We have tested a dynamic polymer-based surface passivation method for LCR conducted in oxide-coated silicon-glass microchips. The combination of polyvinylpyrrolidone 40 (PVP-40) at 0.75% (w/v) with an excess of the ligase produced successful LCR in the silicon-glass microchips, with yields of ligated primers comparable to reactions performed in conventional reaction tubes. Ligated primers were detected and quantified simply and conveniently using microchip capillary electrophoresis.

Genotyping by dynamic heating of monolayered beads on a microheated surface

A miniaturized bead-based dynamic allele-specific hybridization (DASH) approach for single-nucleotide polymorphism analysis is presented. Chips with integrated heater and temperature sensors for open-surface DNA analysis were microfabricated. Microcontact printing using a poly(dimethylsiloxane) (PDMS) stamp was employed to create monolayers of immobilized beads on the surface of the chip. This chip allows fast, well-controllable temperature ramping. The temperature distribution was homogeneous over the entire heater area. All three possible variants of an SNP site of a synthesized oligonucleotide were accurately scored using the bead-based DASH approach. Our assay has a nonoptimized temperature ramping rate of 4 degrees C-6 degrees C/min compared to earlier reported values of 2 degrees C-3 degrees C/min, thereby reducing the total analysis time by a factor of 2. Reliable DASH measurement data from areas as small as 12 x 13 microm was achieved. Our bead-based DASH approach has enabled a dramatic volume reduction and is a step towards developing a cost-effective high-throughput DASH method on arrays of single beads.

Integrated portable genetic analysis microsystem for pathogen/infectious disease detection

An integrated portable genetic analysis microsystem including PCR amplification and capillary electrophoretic (CE) analysis coupled with a compact instrument for electrical control and laser-excited fluorescence detection has been developed. The microdevice contains microfabricated heaters, temperature sensors, and membrane valves to provide controlled sample positioning and immobilization in 200-nL PCR chambers. The instrument incorporates a solid-state laser and confocal fluorescence detection optics, electronics for sensing and powering the PCR reactor, and high-voltage power supplies for conducting CE separations. The fluorescein-labeled PCR products are amplified and electrophoretically analyzed in a gel-filled microchannel in <10 min. We demonstrate the utility of this instrument by performing pathogen detection and genotyping directly from whole Escherichia coli and Staphylococcus aureus cells. The E. coli detection assay consists of a triplex PCR amplification targeting genes that encode 16S ribosomal RNA, the fliC flagellar antigen, and the sltI shigatoxin. Serial dilution demonstrates a limit of detection of 2-3 bacterial cells. The S. aureus assay uses a femA marker to identify cells as S. aureus and a mecA marker to probe for methicillin resistance. This integrated portable genomic analysis microsystem demonstrates the feasibility of performing rapid high-quality detection of pathogens and their antimicrobial drug resistance.

Microfabricated systems for nucleic acid analysis

High throughput and automation of nucleic acid analysis are required in order to exploit the information that has been accumulated from the Human Genome Project. Microfabricated analytical systems enable parallel sample processing, reduced analysis-times, low consumption of sample and reagents, portability, integration of various analytical procedures and automation. This review article discusses miniaturized analytical systems for nucleic acid amplification, separation by capillary electrophoresis, sequencing and hybridization. Microarrays are also covered as a new analytical tool for global analysis of gene expression. Thus. instead of studying the expression of a single gene or a few genes at a time we can now obtain the expression profiles of thousands of genes in a single experiment.

Planar chip device for PCR and hybridization with surface acoustic wave pump

We have developed a microfluidic device operating at a planar surface instead of a closed channel network. The fluid is transported in single droplets using surface acoustic waves (SAW) on a piezoelectric LiNbO(3) substrate. The surface of the piezo is chemically structured to induce high contact angles of the droplets or enclose areas where the liquid can wet the substrate. Combining the SAW technique with thin film resistance heaters, a biological analysis chip with integrated DNA amplification by PCR and hybridization was designed. To prevent evaporation of the PCR reagents at high temperatures the sample is enclosed in droplets of mineral oil. On this chip the SAW resolves dried primers, shifts the oil capped liquid between the two heaters and mixes during hybridization. The chip is able to perform a highly sensitive, fast and specific PCR with a volume as low as 200 nl. During the temperature cycles an online monitoring of the DNA concentration is feasible with an optical unit, providing a sensitivity of 0.1 ng. After PCR the product is moved to the second heater for the hybridization on a spotted DNA array. With our chip we were able to detect a single nucleotide polymorphism (SNP) responsible for the Leiden Factor V syndrome from human blood.

Self-contained, fully integrated biochip for sample preparation, polymerase chain reaction amplification, and DNA microarray detection

A fully integrated biochip device that consists of microfluidic mixers, valves, pumps, channels, chambers, heaters, and DNA microarray sensors was developed to perform DNA analysis of complex biological sample solutions. Sample preparation (including magnetic bead-based cell capture, cell preconcentration and purification, and cell lysis), polymerase chain reaction, DNA hybridization, and electrochemical detection were performed in this fully automated and miniature device. Cavitation microstreaming was implemented to enhance target cell capture from whole blood samples using immunomagnetic beads and accelerate DNA hybridization reaction. Thermally actuated paraffin-based microvalves were developed to regulate flows. Electrochemical pumps and thermopneumatic pumps were integrated on the chip to provide pumping of liquid solutions. The device is completely self-contained: no external pressure sources, fluid storage, mechanical pumps, or valves are necessary for fluid manipulation, thus eliminating possible sample contamination and simplifying device operation. Pathogenic bacteria detection from approximately milliliters of whole blood samples and single-nucleotide polymorphism analysis directly from diluted blood were demonstrated. The device provides a cost-effective solution to direct sample-to-answer genetic analysis and thus has a potential impact in the fields of point-of-care genetic analysis, environmental testing, and biological warfare agent detection.

Microfluidics for flow cytometric analysis of cells and particles

This review describes recent developments in microfabricated flow cytometers and related microfluidic devices that can detect, analyze, and sort cells or particles. The high-speed analytical capabilities of flow cytometry depend on the cooperative use of microfluidics, optics and electronics. Along with the improvement of other components, replacement of conventional glass capillary-based fluidics with microfluidic sample handling systems operating in microfabricated structures enables volume- and power-efficient, inexpensive and flexible analysis of particulate samples. In this review, we present various efforts that take advantage of novel microscale flow phenomena and microfabrication techniques to build microfluidic cell analysis systems.

Separation of Sperm and Epithelial Cells in a Microfabricated Device: Potential Application to Forensic Analysis of Sexual Assault Evidence

Forensic DNA analysis of sexual assault evidence requires separation of DNA from epithelial (victim) and sperm (perpetrator) cells. The conventional method used by crime laboratories, which is termed "differential extraction", is a time-consuming process. To supplant the conventional process, separation of sperm from a biological mixture containing epithelial cells has been demonstrated on a microfluidic device. This separation utilizes the differential physical properties of the cells that result in settling of the epithelial cells to the bottom of the inlet reservoir and subsequent adherence to the glass substrate. As a result, low flow rates can be used to separate the sperm cells from the epithelial cell-containing biological mixture. Following cell separation on the microdevice, DNA extraction, amplification, and separation were performed using conventional laboratory methods, showing that the cell separation product in the outlet reservoir was of male origin. The reported cell separation has the potential to impact the forensic DNA analysis backlog of sexual assault cases by circumventing the time-consuming conventional differential extraction procedure.

Blood-on-a-chip

Accurate, fast, and affordable analysis of the cellular component of blood is of prime interest for medicine and research. Yet, most often sample preparation procedures for blood analysis involve handling steps prone to introducing artifacts, whereas analysis methods commonly require skilled technicians and well-equipped, expensive laboratories. Developing more gentle protocols and affordable instruments for specific blood analysis tasks is becoming possible through the recent progress in the area of microfluidics and lab-on-a-chip-type devices. Precise control over the cell microenvironment during separation procedures and the ability to scale down the analysis to very small volumes of blood are among the most attractive capabilities of the new approaches. Here we review some of the emerging principles for manipulating blood cells at microscale and promising high-throughput approaches to blood cell separation using microdevices. Examples of specific single-purpose devices are described together with integration strategies for blood cell separation and analysis modules.

A Three-Dimensional Flow Control Concept for Single-Cell Experiments on a Microchip. 1. Cell Selection, Cell Retention, Cell Culture, Cell Balancing, and Cell Scanning

An ideal microchip for single-cell experiments should be able to allow us to culture cells, to select any desired single cell from a group, to retain the cell for convenient cellular signal detection, and to deliver any buffer or reagent directly to the cell at any time during continual detection and observation. Most importantly, any negative impact on the live cell should be minimized. To accomplish all these functions, we developed a three-dimensional liquid flow control concept and employed special liquid flow fields to manipulate and retain a single yeast cell freely in the chip. A zero-speed point was controlled to retain the cell for three-dimensional cell balancing and cell scanning. A dispersive flow delivered reagents at a high speed to very near the cell and provided them to the cell at a low speed. No force stronger than its gravitational force was exerted on the cell, which could be balanced on different positions on an arc-sloping wall, thus minimizing any negative impact on the cell due to strong liquid flows. Specifically, we demonstrate on-chip single-cell culture, cell wall removal, and reagent delivery. Subsequently, single-cell fluorescence detection was performed, and noise filtering and background correction were applied for data processing.

Increased amplification efficiency of microchip-based PCR by dynamic surface passivation

Surface passivation is critical for effective PCR using silicon-glass chips. We tested a dynamic polymer-based surface passivation method. Polyethylene glycol 8000 (PEG 8000) or polyvinylpyrrolidone 40 (PVP-40) applied at 0.75% (w/v) in the reaction mixture produced significant surface passivation effects using either native or SiO2-precoated silicon-glass chips. PCR amplification was achieved from human genomic DNA as a template as well as from human lymphocytes. The dynamic surface passivation effect of PEG 8000 remained similar under both conditions. Dynamic surface passivation offers a simple and cost-effective method to make microfabricated silicon-glass chips PCR friendly. It can also be used in combination with static passivation (silicon oxide surface layer) to further improve PCR performance using silicon-glass PCR chips.

Cylindrical Compact Thermal-Cycling Device for Continuous-Flow Polymerase Chain Reaction

A compact, thermal-cycling device for high-throughput continuous-flow polymerase chain reaction (PCR) has been developed, which consists of a flow-through capillary and a cylindrical heating-block assembly. A 3.5-m-long fused-silica capillary coils helically, with 33 turns, up around the 30-mm-diameter assembly of three equally divided thermostating copper blocks for melting, annealing, and extension. An injected PCR mixture undergoes one cycle of PCR each turn. A continuous-flow PCR of one sample and also a segmented-flow PCR of four different samples have been successfully demonstrated. The present device can easily evolve into a parallel-processing, multistation compact device and be modified to have real-time PCR capability. This solid-based compact PCR device, therefore, has a potentiality to be the format of choice when developed for a portable system.