Simultaneous determination of aflatoxin M1, ochratoxin A, zearalenone and α-zearalenol in milk by UHPLC-MS/MS

A novel electrochemical aptasensor for ochratoxin a sensing in spiked food using strand-displacement polymerase reaction

Herein, an aptasensor is presented for electrochemical determination of ochratoxin A (OTA) based on nontarget-triggered production of rolling circular amplification (RCA). The surface of gold electrode is modified with thiolated complementary strand of aptamer (CS) as both capture probe and primer and OTA aptamer (Apt) as both sensing molecule and padlock probe (PLP). Following the addition of OTA, Apt/OTA conjugate is formed and detached from the electrode surface. Therefore, no RCA is produced after incubation of the modified electrode with T4 DNA ligase and phi29 DNA polymerase and a sharp current signal occurs. The analytical response ranged from 30 pM to 120 nM with detection limit of 5 pM. The designed aptasensor showed superior analytical performance in comparison with other approaches for OTA detection. Also, the approach exhibited good performance for OTA determination in spiked grape juice samples. The technique presented in this study, can be applied to develop sensors for detecting different toxins by replacing the relevant aptamers and complementary strands.

The Compromised Intestinal Barrier Induced by Mycotoxins

Mycotoxins are fungal metabolites that occur in human foods and animal feeds, potentially threatening human and animal health. The intestine is considered as the first barrier against these external contaminants, and it consists of interconnected physical, chemical, immunological, and microbial barriers. In this context, based on in vitro, ex vivo, and in vivo models, we summarize the literature for compromised intestinal barrier issues caused by various mycotoxins, and we reviewed events related to disrupted intestinal integrity (physical barrier), thinned mucus layer (chemical barrier), imbalanced inflammatory factors (immunological barrier), and dysfunctional bacterial homeostasis (microbial barrier). We also provide important information on deoxynivalenol, a leading mycotoxin implicated in intestinal dysfunction, and other adverse intestinal effects induced by other mycotoxins, including aflatoxins and ochratoxin A. In addition, intestinal perturbations caused by mycotoxins may also contribute to the development of mycotoxicosis, including human chronic intestinal inflammatory diseases. Therefore, we provide a clear understanding of compromised intestinal barrier induced by mycotoxins, with a view to potentially develop innovative strategies to prevent and treat mycotoxicosis. In addition, because of increased combinatorial interactions between mycotoxins, we explore the interactive effects of multiple mycotoxins in this review.

Recent Progress and Development of G-Quadruplex-Based Luminescent Assays for Ochratoxin A Detection

Ochratoxin A (OTA) is a mycotoxin that is widespread throughout the world. It contaminates foods such as vegetables, fruits, and rice. It harms human health and has potential carcinogenic effects. The G-quadruplex (G4) is a tetraplexed DNA structure generated from guanine-rich DNA that has found emerging use in aptamer-based sensing systems. This review outlines the status of OTA contamination and conventional detection methods for OTA. Various G4-based methods to detect OTA developed in recent years are summarized along with their advantages and disadvantages compared to existing approaches.

Detection of Aflatoxins in Different Matrices and Food-Chain Positions

Aflatoxins, produced mainly by filamentous fungi Aspergillus flavus and Aspergillus parasiticus, are one of the most carcinogenic compounds that have adverse health effects on both humans and animals consuming contaminated food and feed, respectively. Aflatoxin B1 (AFB1) and aflatoxin B2 (AFB2) as well as aflatoxin G1(AFG1) and aflatoxin G2 (AFG2) occur in the contaminated foods and feed. In the case of dairy ruminants, after the consumption of feed contaminated with aflatoxins, aflatoxin metabolites [aflatoxin M1 (AFM1) and aflatoxin M2 (AFM2)] may appear in milk. Because of the health risk and the official maximum limits of aflatoxins, there is a need for application of fast and accurate testing methods. At present, there are several analytical methods applied in practice for determination of aflatoxins. The aim of this review is to provide a guide that summarizes worldwide aflatoxin regulations and analytical methods for determination of aflatoxins in different food and feed matrices, that helps in the decision to choose the most appropriate method that meets the practical requirements of fast and sensitive control of their contamination. Analytical options are outlined from the simplest and fastest methods with the smallest instrument requirements, through separation methods, to the latest hyphenated techniques.

Sensor Based on Molecularly Imprinted Polymer Membranes and Smartphone for Detection of Fusarium Contamination in Cereals

The combination of the generic mobile technology and inherent stability, versatility and cost-effectiveness of the synthetic receptors allows producing optical sensors for potentially any analyte of interest, and, therefore, to qualify as a platform technology for a fast routine analysis of a large number of contaminated samples. To support this statement, we present here a novel miniature sensor based on a combination of molecularly imprinted polymer (MIP) membranes and a smartphone, which could be used for the point-of-care detection of an important food contaminant, oestrogen-like toxin zearalenone associated with Fusarium contamination of cereals. The detection is based on registration of natural fluorescence of zearalenone using a digital smartphone camera after it binds to the sensor recognition element. The recorded image is further processed using a mobile application. It shows here a first example of the zearalenone-specific MIP membranes synthesised in situ using "dummy template"-based approach with cyclododecyl 2, 4-dihydroxybenzoate as the template and 1-allylpiperazine as a functional monomer. The novel smartphone sensor system based on optimized MIP membranes provides zearalenone detection in cereal samples within the range of 1-10 µg mL^-1 demonstrating a detection limit of 1 µg mL^-1 in a direct sensing mode. In order to reach the level of sensitivity required for practical application, a competitive sensing mode is also developed. It is based on application of a highly-fluorescent structural analogue of zearalenone (2-[(pyrene-l-carbonyl) amino]ethyl 2,4-dihydroxybenzoate) which is capable to compete with the target mycotoxin for the binding to zearalenone-selective sites in the membrane's structure. The competitive mode increases 100 times the sensor's sensitivity and allows detecting zearalenone at 10 ng mL^-1. The linear dynamic range in this case comprised 10-100 ng mL^-1. The sensor system is tested and found effective for zearalenone detection in maize, wheat and rye flour samples both spiked and naturally contaminated. The developed MIP membrane-based smartphone sensor system is an example of a novel, inexpensive tool for food quality analysis, which is portable and can be used for the "field" measurements and easily translated into the practice.

Compensate for or Minimize Matrix Effects? Strategies for Overcoming Matrix Effects in Liquid Chromatography-Mass Spectrometry Technique: A Tutorial Review

In recent decades, mass spectrometry techniques, particularly when combined with separation methods such as high-performance liquid chromatography, have become increasingly important in pharmaceutical, bio-analytical, environmental, and food science applications because they afford high selectivity and sensitivity. However, mass spectrometry has limitations due to the matrix effects (ME), which can be particularly marked in complex mixes, when the analyte co-elutes together with other molecules, altering analysis results quantitatively. This may be detrimental during method validation, negatively affecting reproducibility, linearity, selectivity, accuracy, and sensitivity. Starting from literature and own experience, this review intends to provide a simple guideline for selecting the best operative conditions to overcome matrix effects in LC-MS techniques, to obtain the best result in the shortest time. The proposed methodology can be of benefit in different sectors, such as pharmaceutical, bio-analytical, environmental, and food sciences. Depending on the required sensitivity, analysts may minimize or compensate for ME. When sensitivity is crucial, analysis must try to minimize ME by adjusting MS parameters, chromatographic conditions, or optimizing clean-up. On the contrary, to compensate for ME analysts should have recourse to calibration approaches depending on the availability of blank matrix. When blank matrices are available, calibration can occur through isotope labeled internal standards and matrix matched calibration standards; conversely, when blank matrices are not available, calibration can be performed through isotope labeled internal standards, background subtraction, or surrogate matrices. In any case, an adjusting of MS parameters, chromatographic conditions, or a clean-up are necessary.

Transcriptomic and proteomic profiling reveals the intestinal immunotoxicity induced by aflatoxin M1 and ochratoxin A

Mycotoxins-contaminated milk could threaten human health; therefore, it is necessary to demonstrate the toxicological effect of mycotoxins in milk. Most recently, researchers have paid more attention to the immunotoxic effects of the individual cereal-contaminating mycotoxins, namely, zearalenone and deoxynivalenol. However, there is scant information about the intestinal immunotoxicity of aflatoxin M1 (AFM1), let alone that of a combination of AFM1 and ochratoxin A (OTA), which often co-occur in milk. To reveal the inflammatory response caused by these mycotoxins, expression of inflammation-related genes in differentiated Caco-2 cells was analyzed, demonstrating a synergistic effect of the mixture of AFM1 (4 μg/mL) and OTA (4 μg/mL). Integrative transcriptomic and proteomic analyses were also performed. A cross-omics analysis identified several mechanisms underlying this synergy: (i) compared with stimulation with either compound alone, combined use resulted in stronger induction of proteins involved in immunity-related pathways; (ii) combination of the two agents targeted different points in the same pathways; and (iii) combination of the two agents activated specific inflammation-related pathways. These results suggested that combined use of AFM1 and OTA might exacerbate intestinal inflammation, indicating that regulatory authorities should pay more attention to food contamination by multiple mycotoxins when performing risk assessments.

Food Consumption Data as a Tool to Estimate Exposure to Mycoestrogens

Zearalenone and alternariol are mycotoxins produced by Fusarium and Alternaria species, respectively, that present estrogenic activity and consequently are classified as endocrine disruptors. To estimate the exposure of the Portuguese population to these two mycotoxins at a national level, a modelling approach, based on data from 94 Portuguese volunteers, was developed considering as inputs: i) the food consumption data generated within the National Food and Physical Activity Survey; and ii) the human biomonitoring data used to assess the exposure to the referred mycotoxins. Six models of association between mycoestrogens urinary levels (zearalenone, total zearalenone and alternariol) and food items (meat, cheese, and fresh-cheese, breakfast cereals, sweets) were established. Applying the obtained models to the consumption data (n = 5811) of the general population, the median estimates of the probable daily intake revealed that a fraction of the Portuguese population might exceed the tolerable daily intake defined for zearalenone. A reference intake value for alternariol is still lacking, thus the characterization of risk due to the exposure to this mycotoxin was not possible to perform. Although the unavoidable uncertainties, these results are important contributions to understand the exposure to endocrine disruptors in Portugal and the potential Public Health consequences.

Detection Methods for Aflatoxin M1 in Dairy Products

Mycotoxins are toxic compounds produced mainly by fungi of the genera Aspergillus, Fusarium and Penicillium. In the food chain, the original mycotoxin may be transformed in other toxic compounds, reaching the consumer. A good example is the occurrence of aflatoxin M1 (AFM1) in dairy products, which is due to the presence of aflatoxin B1 (AFB1) in the animal feed. Thus, milk-based foods, such as cheese and yogurts, may be contaminated with this toxin, which, although less toxic than AFB1, also exhibits hepatotoxic and carcinogenic effects and is relatively stable during pasteurization, storage and processing. For this reason, the establishment of allowed maximum limits in dairy products and the development of methodologies for its detection and quantification are of extreme importance. There are several methods for the detection of AFM1 in dairy products. Usually, the analytical procedures go through the following stages: sampling, extraction, clean-up, determination and quantification. For the extraction stage, the use of organic solvents (as acetonitrile and methanol) is still the most common, but recent advances include the use of the Quick, Easy, Cheap, Effective, Rugged, and Safe method (QuEChERS) and proteolytic enzymes, which have been demonstrated to be good alternatives. For the clean-up stage, the high selectivity of immunoaffinity columns is still a good option, but alternative and cheaper techniques are becoming more competitive. Regarding quantification of the toxin, screening strategies include the use of the enzyme-linked immunosorbent assay (ELISA) to select presumptive positive samples from a wider range of samples, and more reliable methods-high performance liquid chromatography with fluorescence detection or mass spectroscopy-for the separation, identification and quantification of the toxin.

Mycotoxins feed contamination in a dairy farm - potential implications for milk contamination and workers' exposure in a One Health approach

BACKGROUND

Dairy farming feed can be contaminated with mycotoxins, affecting animals' health and milk quality. Dairy farming is also prone to occupational exposure to mycotoxins, and feed is recognized as a source of contamination in the workplace. An exploratory study was developed in a dairy farm located in Portugal intending to assess the mycotoxins present in the feed.

RESULTS

All the samples analyzed presented contamination by at least two mycotoxins and up to a maximum of 13 mycotoxins in the same sample. Zearalenone (ZEA) was detected in all the samples (n = 10) followed by deoxynivalenol (DON), which was reported in eight samples, and ochratoxin A (OTA), reported in five samples.

CONCLUSION

The results point to the possible contamination of milk by several mycotoxins and raise the possibility of occupational exposure to mycotoxins due to feed contamination. An adequate One Health approach for dairy production should address these issues through effective preventive actions such as avoiding the use of feed contaminated with mycotoxins. This represents an important challenge due to climate change. It requires proper attention and accurate management measures. © 2019 Society of Chemical Industry.

Transcriptome Analysis of Ochratoxin A-Induced Apoptosis in Differentiated Caco-2 Cells

Ochratoxin A (OTA), an important mycotoxin that occurs in food and animal feed, has aroused widespread concern in recent years. Previous studies have indicated that OTA causes nephrotoxicity, hepatotoxicity, genotoxicity, immunotoxicity, cytotoxicity, and neurotoxicity. The intestinal toxicity of OTA has gradually become a focus of research, but the mechanisms underlying this toxicity have not been described. Here, differentiated Caco-2 cells were incubated for 48 h with different concentrations of OTA and transcriptome analysis was used to estimate damage to the intestinal barrier. Gene expression profiling was used to compare the characteristics of differentially expressed genes (DEGs). There were altogether 10,090 DEGs, mainly clustered into two downregulation patterns. The Search Tool for Retrieval of Interacting Genes (STRING), which was used to analyze the protein-protein interaction network, indicated that 24 key enzymes were mostly responsible for regulating cell apoptosis. Quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analysis was used to validate eight genes, three of which were key genes (CASP3, CDC25B, and EGR1). The results indicated that OTA dose-dependently induces apoptosis in differentiated Caco-2 cells. Transcriptome analysis showed that the impairment of intestinal function caused by OTA might be partly attributed to apoptosis, which is probably associated with downregulation of murine double minute 2 (MDM2) expression and upregulation of Noxa and caspase 3 (CASP3) expression. This study has highlighted the intestinal toxicity of OTA and provided a genome-wide view of biological responses, which provides a theoretical basis for enterotoxicity and should be useful in establishing a maximum residue limit for OTA.

Characterization and Genome Analysis of a Zearalenone-Degrading Bacillus velezensis Strain ANSB01E

Zearalenone, a nonsteroidal estrogenic mycotoxin mainly produced by Fusarium species, causes reproductive disorders and hyperestrogenic syndromes in animals and humans. The bacterial strain Bacillus velezensis ANSB01E, isolated from chicken cecal content, was capable of effectively degrading zearalenone in both liquid medium and mouldy corn. Moreover, Bacillus velezensis ANSB01E exhibited good antimicrobial activities against animal pathogenic bacteria, including Escherichia coli, Staphylococcus aureus, and Salmonella spp. Genome-based analysis revealed the presence of genes coding peroxiredoxin and alpha/beta hydrolase in Bacillus velezensis ANSB01E, which may be involved in zearalenone degradation. The study on the genome provides insights into the zearalenone degradation mechanisms and advances the potential application of Bacillus velezensis ANSB01E in food and feed industry.

Ultrasensitive electrochemical detection of ochratoxin A based on signal amplification by one-pot synthesized flower-like PEDOT-AuNFs supported on a graphene oxide sponge

To enhance the sensitivity of an aptasensor, a novel strategy was designed to develop an electrochemical aptasensor based on poly(3,4-ethylenedioxy thiophene)-gold nanoflower (PEDOT-AuNF) composites supported on a three-dimensional graphene oxide sponge (GOS). GOS with a three-dimensional sponge-like porous structure, exhibiting excellent electrical conductivity and a large surface area, provided the first amplification of the electrochemical signal for ochratoxin A (OTA) detection. PEDOT-AuNFs, synthesized by an ionic liquid-assisted one-pot method, presented a peculiar hierarchical flower-like structure, a high electroactive surface area, and more binding sites for immobilizing the aptamer molecules by the Au-S bonds. When PEDOT-AuNFs were supported on the surface of GOS by the interaction of the π-π packing between PEDOT and graphene oxide, a synergistic effect was produced to provide the second amplification for the aptasensor. PEDOT-AuNFs/GOS provided an ultrasensitive detection technique by multiple signal amplification for the electrochemical sensing of OTA. Consequently, this strategy not only endowed the aptasensor with high sensitivity but also needed no complicated signal amplification. The electrochemical sensor was fabricated successfully on a glassy carbon electrode to detect OTA with a linear response in the range of 0.01-20 ng L^-1 and a limit of detection of 4.9 pg L^-1. Moreover, it displayed good specificity, reproducibility and stability. The utilization of the proposed aptasensor for the quantitative determination of OTA in wine indicates that it can find promising applications in detecting OTA and even other mycotoxins in foodstuffs.

Multi-mycotoxins analysis in liquid milk by UHPLC-Q-Exactive HRMS after magnetic solid-phase extraction based on PEGylated multi-walled carbon nanotubes

A simple and rapid magnetic solid-phase extraction (MSPE) method using PEGylated multi-walled carbon nanotubes magnetic nanoparticles (PEG-MWCNTs-MNP) as absorbents is proposed for isolation and enrichment of aflatoxin B₁ (AFB₁), aflatoxin B₂ (AFB₂), aflatoxin G₁ (AFG₁), aflatoxin G₂ (AFG₂), aflatoxin M₁ (AFM₁), aflatoxin M₂ (AFM₂), ochratoxin A (OTA), zearalenone (ZEA), zearalanone (ZAN), α-zeralanol (α-ZAL), β-zeralanol (β-ZAL), α-zeralenol (α-ZOL), and β-zeralenol (β-ZOL) from liquid milk. Combined with ultra-high performance liquid chromatography Q-Exactive high resolution mass spectrometry, simultaneous qualification of these mycotoxins was achieved with sensitivity and specificity. The proposed method showed a good linearity (R² ≥ 0.995), high sensitivity (limit of detection in the range of 0.005-0.050 μg/kg and limit of quantification in the range of 0.015-0.150 μg/kg), adequate recovery (81.8-106.4%), and good repeatability (intra-day precision in the range of 2.1-8.5% and inter-day precision in the range of 3.9-11.7%). It has been successfully applied to the determination of 13 mycotoxins in real liquid milk samples.

UHPLC-ToF-MS method for determination of multi-mycotoxins in maize: Development and validation

An Ultra-High Performance Liquid Chromatography combined with Time-of-Flight Mass Spectrometry (UHPLC–ToF-MS) method has been developed for determination of nine mycotoxins, namely aflatoxins (AFB₁, AFB₂, AFG₁ and AFG₂), ochratoxin A (OTA), zearalenone (ZEA), toxin T2 (T2) and fumonisins (FB₁ and FB₂) in maize. The method included a two-step extraction with acetonitrile 80% (v/v). After optimization, the analytical method was validated. The different concentrations tested take in account the Maximum Levels (ML) for maize (Commission Regulation EC no. 1881/2006) and good results for repeatability (%RSD_r ≤ 15.4%), reproducibility (%RSD_R ≤ 15.9%) and recovery (77.8–110.4%, except for AFG2 at 2 μg/kg which presented a recovery of 73.4%) were achieved. These met the performance criteria imposed by Commission Regulation (EC) no. 401/2006. The method was applied to twenty-two samples from Portuguese producers of maize. Fumonisins were the most frequently detected mycotoxins, but the levels do not exceed those imposed by European legislation.

•

A UHPLC–ToF-MS method was developed for determination of nine mycotoxins in maize.

•

Validation of the method was performed taking in account the EU maximum legal limits for maize.

•

Good results for repeatability, reproducibility and recovery were achieved.

•

The method was applied to 22 samples from Portuguese producers of maize.

•

Fumonisins were the most frequently detected mycotoxins.

Transcriptome analysis revealed that aflatoxin M1 could cause cell cycle arrest in differentiated Caco-2 cells

Being a hydroxylated metabolite of aflatoxin B1 (AFB1) and the most threatening aspect of AFB1 contamination, aflatoxin M1 (AFM1) can lead to hepatotoxicity and hepato-carcinogenicity, and possess intestinal cytotoxicity. However, little is known about the potential mechanisms of the extrahepatic effect. The aim of this study was to investigate intestinal dysfunction induced by AFM1 via transcriptome analysis. Gene expression profiling was analyzed to comparatively characterize the differentially expressed genes (DEGs) after differentiated Caco-2 cells were exposed to different concentrations of AFM1 for 48 h. A total of 165 DEGs were significantly clustered into two down-regulated patterns. Protein-protein interaction (PPI) network analysis based on Search Tool for Retrieval of Interacting Genes (STRING)suggested that 23 key enzymes mainly participated in the regulation of the cell cycle. Q-PCR analysis was performed to validate that key 12 genes (BUB1, BUB1B, MAD2L1, CCNA2, RB1, CDK1, ANAPC4, ATM, KITLG, PRKAA2, SIRT1, and SOS1) were involved. This study firstly revealed that the toxicity of AFM1 to intestinal functions may be partly due to the occurrence of cell cycle arrest, which is linked to changes in CDK1, SOS1/Akt, and AMPK signaling molecules.

Quantum bead-based fluorescence-linked immunosorbent assay for ultrasensitive detection of aflatoxin M1 in pasteurized milk, yogurt, and milk powder

Herein, we reported a novel direct competitive fluorescence-linked immunosorbent assay (dcFLISA) for the ultrasensitive detection of aflatoxin M₁ (AFM₁) in pasteurized milk, yogurt, and milk powder using 150-nm quantum dot beads (QB) as the carrier of competing antigen. Large QB were applied to decrease the binding affinity of the competing antigen to antibody and enhance the fluorescent signal intensity. The aflatoxin B₁ molecule was used as the surrogate of AFM₁ to label with BSA on the surface of QB because of its 63% cross reaction to anti-AFM₁ mAb. The binding affinity of the competing antigen to mAb was tuned by changing the labeled molar ratios of aflatoxin B₁ to BSA. Through combining the advantages of QB as the carrier of the competing antigen, including low binding affinity to mAb and highly fluorescent signal output, the proposed dcFLISA exhibited an ultrahigh sensitivity for AFM₁ detection, with a half-maximal inhibitory concentration of 3.15 pg/mL in 0.01 M phosphate-buffered saline solution (pH 7.4), which is substantially lower than that of the traditional horseradish peroxidase-based ELISA. The proposed method also exhibited very low detection limitations of 0.5, 0.6, and 0.72 pg/mL for real pasteurized milk, yogurt, and milk powder, respectively. These values are considerably below the maximum permissible level of the European Commission standard for AFM₁ in dairy products. In summary, the proposed dcFLISA offers a novel strategy with an ultrahigh sensitivity for the routine monitoring of AFM₁ in various dairy products.

Modulation of Mucin (MUC2, MUC5AC and MUC5B) mRNA Expression and Protein Production and Secretion in Caco-2/HT29-MTX Co-Cultures Following Exposure to Individual and Combined Aflatoxin M1 and Ochratoxin A

Aflatoxin M1 (AFM1) and ochratoxin A (OTA), which widely coexist in milk, may pose a serious threat to human health. Mucin is a major component of the intestinal mucus layer, which plays an important role in maintaining intestinal mucosal homeostasis. However, the effect of mycotoxins AFM1 and OTA on intestinal mucin production is still not clear. This study aimed to investigate individual and interactive effects of mycotoxins AFM1 and OTA on the intestinal barrier and the mRNA expression of intestinal mucin (MUC2, MUC5AC and MUC5B) and on protein production in Caco-2/HT29-MTX cultures after 48 h of exposure. Our results show that individual mycotoxins and their mixtures significantly reduced intestinal cell viability and transepithelial electrical resistance (TEER) values, as well as significantly altered intestinal mucin mRNA expression and protein abundance. Moreover, OTA showed toxicity similar to AFM1 in cell viability and TEER value at the same concentration. When the two mycotoxins acted in combination, the synergistic effects observed in the assessment of cell viability and protein abundance in all mono- and co-cultures. In general, this study provides evidence that AFM1 and OTA can damage the intestine, and it contributes to optimized maximum permissible limits of mycotoxins in milk.

A critical evaluation of health risk assessment of modified mycotoxins with a special focus on zearalenone

A comprehensive definition introducing the term "modified mycotoxins" to encompass all possible forms in which mycotoxins and their modifications can occur was recently proposed and has rapidly gained wide acceptance within the scientific community. It is becoming increasingly evident that exposure to such modified mycotoxins due to their presence in food and feed has the potential to pose a substantial additional risk to human and animal health. Zearalenone (ZEN) is a well-characterized Fusarium toxin. Considering the diversity of modified forms of ZEN occurring in food and feed, the toxicologically relevant endocrine activity of many of these metabolites, and the fact that modified forms add to a dietary exposure which approaches the tolerable daily intake by free ZEN alone, modified forms of ZEN present an ideal case study for critical evaluation of modified mycotoxins in food safety. Following a summary of recent scientific opinions of EFSA dealing with health risk assessment of ZEN alone or in combination with its modified forms, uncertainties and data gaps are highlighted. Issues essential for evaluation and prioritization of modified mycotoxins in health risk assessment are identified and discussed, including opportunities to improve exposure assessment using biomonitoring data. Further issues such as future consideration of combinatory effects of the parent toxin with its modified forms and also other compounds co-occurring in food and feed are addressed. With a particular focus on ZEN, the most pressing challenges associated with health risk assessment of modified mycotoxins are identified and recommendations for further research to fill data gaps and reduce uncertainties are made.

Turn-On Fluorescence Aptasensor on Magnetic Nanobeads for Aflatoxin M1 Detection Based on an Exonuclease III-Assisted Signal Amplification Strategy

In order to satisfy the need for sensitive detection of Aflatoxin M1 (AFM1), we constructed a simple and signal-on fluorescence aptasensor based on an autocatalytic Exonuclease III (Exo III)-assisted signal amplification strategy. In this sensor, the DNA hybridization on magnetic nanobeads could be triggered by the target AFM1, resulting in the release of a single-stranded DNA to induce an Exo III-assisted signal amplification, in which numerous G-quadruplex structures would be produced and then associated with the fluorescent dye to generate significantly amplified fluorescence signals resulting in the increased sensitivity. Under the optimized conditions, this aptasensor was able to detect AFM1 with a practical detection limit of 9.73 ng kg⁻¹ in milk samples. Furthermore, the prepared sensor was successfully used for detection of AFM1 in the commercially available milk samples with the recovery percentages ranging from 80.13% to 108.67%. Also, the sensor performance was evaluated by the commercial immunoassay kit with satisfactory results.

Novel molecularly imprinted polymers on metal–organic frameworks as sensors for the highly selective detection of zearalenone in wheat

This work provides a rapid and simple method for the determination of trace substances in complex systems.

Sensitive colorimetric detection of ochratoxin A by a dual-functional Au/Fe3O4 nanohybrid-based aptasensor

A novel colorimetric aptasensor based on a Au/Fe₃O₄ nanohybrid was developed to detect ochratoxin A (OTA). The aptasensor is composed of a free OTA aptamer, a Au/Fe₃O₄ nanohybrid coated with biotinylated complementary DNA of the OTA aptamer (biotin-cDNA-Au/Fe₃O₄), and free alkaline-phosphatase-labeled streptavidin (SA-ALP). The Au/Fe₃O₄ nanohybrid not only immobilizes biotin-cDNA but also magnetically separates SA-ALP from the sample solution. One part of the OTA aptamer sequence hybridizes with biotin-cDNA immobilized on Au/Fe₃O₄, and the left part of the OTA aptamer sequence covers the biotin and blocks the specific interaction between biotin and SA-ALP. OTA can interrupt the interaction of OTA aptamer binding to biotin-cDNA-Au/Fe₃O₄ and can inhibit the shielding effect of the OTA aptamer on biotin. The amount of SA-ALP that can be captured by biotin-cDNA-Au/Fe₃O₄ thus increases with increasing OTA concentration. Through a simple magnetic separation, the collected SA-ALP-linked Au/Fe₃O₄ can produce a yellow-colored solution in the presence of p-nitrophenyl phosphate (p-NPP). This colorimetric aptasensor can detect OTA as low as 1.15 ng mL⁻¹ with high specificity.

A novel colorimetric aptasensor based on a Au/Fe₃O₄ nanohybrid was developed to detect ochratoxin A (OTA).

Evaluation of Matrix Effects in Quantifying Microbial Secondary Metabolites in Indoor Dust Using Ultraperformance Liquid Chromatograph-Tandem Mass Spectrometer

Background

Liquid chromatography-tandem mass spectrometry (LC-MSMS) for simultaneous analysis of multiple microbial secondary metabolites (MSMs) is potentially subject to interference by matrix components.

Methods

We examined potential matrix effects (MEs) in analyses of 31 MSMs using ultraperformance LC-MSMS. Twenty-one dust aliquots from three buildings (seven aliquots/building) were spiked with seven concentrations of each of the MSMs (6.2 pg/μl-900 pg/μl) and then extracted. Another set of 21 aliquots were first extracted and then, the extract was spiked with the same concentrations. We added deepoxy-deoxynivalenol (DOM) to all aliquots as a universal internal standard. Ten microliters of the extract was injected into the ultraperformance LC-MSMS. ME was calculated by subtracting the percentage of the response of analyte in spiked extract to that in neat standard from 100. Spiked extract results were used to create a matrix-matched calibration (MMC) curve for estimating MSM concentration in dust spiked before extraction.

Results

Analysis of variance was used to examine effects of compound (MSM), building and concentration on response. MEs (range: 63.4%-99.97%) significantly differed by MSM (p < 0.01) and building (p < 0.05). Mean percent recoveries adjusted with DOM and the MMC method were 246.3% (SD = 226.0) and 86.3% (SD = 70.7), respectively.

Conclusion

We found that dust MEs resulted in substantial underestimation in quantifying MSMs and that DOM was not an optimal universal internal standard for the adjustment but that the MMC method resulted in more accurate and precise recovery compared with DOM. More research on adjustment methods for dust MEs in the simultaneous analyses of multiple MSMs using LC-MSMS is warranted.

Evaluation of different competitive immunoassays for aflatoxin M1 determination in milk samples by means of inductively coupled plasma mass spectrometry

Haptens (i.e. biomolecules which molecular weight is lower than 10 kDa) determination by inductively coupled plasma mass spectrometry (ICP-MS) is usually performed by means of competitive immunoassays. In these immunoassays, analyte quantification is indirectly carried out using two different tracer species (i.e. antibodies or antigen-protein conjugates). However, the benefits (and drawbacks) derived from using a given tracer species have not been systematically investigated so far. The goal of this work is to evaluate the influence of the tracer species employed in competitive immunoassays on the analytical figures of merit for aflatoxin M₁ (AFM₁) determination in milk samples. To this end, three different strategies have been developed and evaluated, namely: (i) antibody binding inhibition assay (ABIA); (ii) capture inhibition assay (CIA); and (iii) capture bridge inhibition assay (CBIA). Experimental results show that the use of the antibody as tracer species (as in the ABIA approach) affords better analytical figures of merit for AFM₁ determination than using the antigen-protein conjugate as the tracer one (as in the CIA and CBIA strategies). The limit of detection afforded by ABIA strategy (i.e. 0.1 ng kg^-1) for AFM₁ determination was 1000-fold and 50-fold lower regarding the CIA and CBIA strategies, respectively. In the case of the ABIA approach, the characteristics of the metal nanoparticle label employed to detect the tracer species is critical on the analytical figures of merit. However, when the hapten-protein conjugates are used as tracer species, immunocomplex formation is severely hampered by steric effects caused by the protein moiety and, consequently, the characteristics of the metal nanoparticle label is not critical in the immunoassay performance. The different immunoassay strategies were successfully validated for AFM₁ determination in milk samples using a certified reference material of whole milk powder (ERM-BD283) according to European Conformity guidelines for analytical methods of food contaminants and mycotoxins. Compared to ELISA, the immunoassay developed for AFM₁ determination in milk samples improve limits of detection up to 10-fold.

A FRET-based dual-color evanescent wave optical fiber aptasensor for simultaneous fluorometric determination of aflatoxin M1 and ochratoxin A

A dual-color fluorescence resonance energy transfer (FRET) based aptasensor is described for simultaneous determination of the mycotoxins aflatoxin M1 (AFM1) and ochratoxin A (OTA). Aptamers against AFM1 and OTA were labeled with two fluorophores with different excitation wavelengths (Cy5.5; 675 nm; and Alexa 405; 401 nm), respectively. They were used as the signalling probes. A compact dual-color evanescent wave all-fiber detection system with two lasers (635 nm; red; and 405 nm; purple) was used for the simultaneous collection of two-wavelength fluorescence signals. The hybridization of labeled aptamers with complementary sequences (Q-cDNA) labeled with a dark quencher (BHQ₃ or dabcyl) causes fluorescence to be strongly reduced because of the fluorescence resonance energy transfer. In the presence of AFM1 and OTA, they bind to their respective aptamer and result in the dissociation of double stranded DNA, which induce fluorescence recovery. Under the optimum conditions, AFM1 and OTA can simultaneously and selectively be determined ranged from 1 ng·L^-1 to 1 mg·L^-1. The detection limits of AFM1 and OTA are 21 and 330 ng·L^-1, respectively (S/N = 3). The FRET-based dual-color detection scheme was applied to the simultaneous detection of AFM1 and OTA in milk with good recovery, precision, and accuracy. Graphical abstract Aptamers against AFM1 and OTA were labeled with two fluorophores with different excitation wavelengths (Cy5.5; 675 nm; and Alexa 405; 401 nm) and then used as signalling probes. A FRET-based aptasensor is described for simultaneous determination of AFM1 and OTA using dual-color evanescent wave system with two lasers (635 nm; red; and 405 nm).

Development and comparison of single-step solid phase extraction and QuEChERS clean-up for the analysis of 7 mycotoxins in fruits and vegetables during storage by UHPLC-MS/MS

A robust and sensitive UHPLC-MS/MS method was developed for the analysis of seven mycotoxins in fruits and vegetables. The variations of seven mycotoxins concentrations during storage were also determined for the first time. Solid phase extraction (SPE) and QuEChERS clean-up were compared, and extraction was finally performed with acetonitrile under acidic conditions followed by HLB SPE purification. Seven mycotoxins were separated on a C18 column by gradient elution, scanned by ESI⁺ and ESI^- dynamic switching and detected with MRM mode. LOD and LOQ, matrix effect, accuracy and precision of the developed method were investigated. Results were linear in their concentration ranges for all mycotoxins with R² being greater than 0.999. LODs and LOQs were ranged from 0.05 to 3.0 μg/kg and 0.2 to 10.0 μg/kg, respectively. Average recoveries were between 81.1% and 116% with intraday- and interday-precision being in the ranges of 3.0-6.2% and 4.2-6.1%, respectively. The validated method provides sufficient selectivity, sensitivity and accuracy to screen for seven mycotoxins at trace levels, without using standard addition or matrix-matched calibration to compensate for matrix effects. The method was successfully applied for mycotoxins analysis in fruits and vegetables. None were detected in fresh samples, but AOH and AME were detected in strawberry, and TeA was detected in tomato fruits during long-term storage. Their concentrations were in the range of 3.6-165.3 μg/kg from 3 days to 60 days and significantly increased along with storage time.

Zearalenone reduction by commercial peroxidase enzyme and peroxidases from soybean bran and rice bran

The peroxidase (POD) enzyme, obtained from different sources, has been described in the literature regarding its good results of reduction in concentration or degradation levels of mycotoxins, such as aflatoxin B1, deoxynivalenol and zearalenone (ZEA). This study aimed at evaluating the action of commercial POD and POD from soybean bran (SB) and rice bran (RB) in ZEA reduction in a model solution and the characterisation of the mechanism of enzyme action. POD was extracted from SB and RB in phosphate buffer by orbital agitation. Evaluation of the action of commercial POD and POD from SB and RB in ZEA reduction was carried out in phosphate buffer and aqueous solution, respectively. Parameters of (Michaelis-Menten constant) (KM) and maximal rate (Vmax) were determined in the concentration range from 0.16 to 6 µg mL-1. ZEA reduction was determined and the mechanism of enzyme action was characterised by FTIR and high-pressure liquid chromatography-electrospray tandem mass spectrometry. Commercial POD and POD from RB and SB reduced ZEA concentration by 69.9%, 47.4% and 30.6% in 24 h, respectively. KM values were 39.61 and 8.90 µM, whereas Vmax values were 0.170 and 0.011 µM min-1 for commercial POD and POD from RB, respectively. The characterisation of the mechanism of enzyme action showed the oxidoreductive action of commercial POD in the mycotoxin. The use of commercial POD and POD from agro-industrial by-products, such as SB and RB, could be a promising alternative for ZEA biodegradation.

Interactions of zearalenone and its reduced metabolites α-zearalenol and β-zearalenol with serum albumins: species differences, binding sites, and thermodynamics

Zearalenone (ZEN) is a mycotoxin produced by Fusarium species. ZEN mainly appears in cereals and related foodstuffs, causing reproductive disorders in animals, due to its xenoestrogenic effects. The main reduced metabolites of ZEN are α-zearalenol (α-ZEL) and β-zearalenol (β-ZEL). Similarly to ZEN, ZELs can also activate estrogen receptors; moreover, α-ZEL is the most potent endocrine disruptor among these three compounds. Serum albumin is the most abundant plasma protein in the circulation; it affects the tissue distribution and elimination of several drugs and xenobiotics. Although ZEN binds to albumin with high affinity, albumin-binding of α-ZEL and β-ZEL has not been investigated. In this study, the complex formation of ZEN, α-ZEL, and β-ZEL with human (HSA), bovine (BSA), porcine (PSA), and rat serum albumins (RSA) was investigated by fluorescence spectroscopy, affinity chromatography, thermodynamic studies, and molecular modeling. Our main observations are as follows: (1) ZEN binds with higher affinity to albumins than α-ZEL and β-ZEL. (2) The low binding affinity of β-ZEL toward albumin may result from its different binding position or binding site. (3) The binding constants of the mycotoxin-albumin complexes significantly vary with the species. (4) From the thermodynamic point of view, the formation of ZEN-HSA and ZEN-RSA complexes are similar, while the formation of ZEN-BSA and ZEN-PSA complexes are markedly different. These results suggest that the toxicological relevance of ZEN-albumin and ZEL-albumin interactions may also be species-dependent.

Removal of Zearalenone and Zearalenols from Aqueous Solutions Using Insoluble Beta-Cyclodextrin Bead Polymer

Zearalenone (ZEN) is a Fusarium-derived mycotoxin, exerting xenoestrogenic effects in animals and humans. ZEN and its derivatives commonly occur in cereals and cereal-based products. During the biotransformation of ZEN, its reduced metabolites, α-zearalenol (α-ZEL) and β-zearalenol (β-ZEL), are formed; α-ZEL is even more toxic than the parent compound ZEN. Since previous studies demonstrated that ZEN and ZELs form stable complexes with β-cyclodextrins, it is reasonable to hypothesize that cyclodextrin polymers may be suitable for mycotoxin removal from aqueous solutions. In this study, the extraction of ZEN and ZELs from water, buffers, and corn beer was investigated, employing insoluble β-cyclodextrin bead polymer (BBP) as a mycotoxin-binder. Our results demonstrate that even relatively small amounts of BBP can strongly decrease the mycotoxin content of aqueous solutions (including beer). After the first application of BBP for mycotoxin binding, BBP could be completely reactivated through the elimination of ZEN from the cyclodextrin cavities by washing with a 50 v/v% ethanol-water mixture. Therefore, our study suggests that insoluble cyclodextrin polymers may be suitable tools in the future to deplete mycotoxins from contaminated drinks.

Non-destructive and rapid evaluation of aflatoxins in brown rice by using near-infrared and mid-infrared spectroscopic techniques

The applicability of near-infrared (NIR) and mid-infrared (MIR) spectroscopy combined with chemometrics was explored in this study to develop rapid, low-cost and non-destructive spectroscopic methods for classification and quantification of aflatoxins in brown rice. A total of 132 brown rice samples within the aflatoxin concentration range of 0-2435.8 μg/kg were prepared by artificially inoculated with A. flavus and A. parasiticus strains of fungus. For the classification of samples at varying levels of aflatoxin B₁, the linear discriminant analysis model obtained correct classification rate of 96.9 and 90.6% for NIR and MIR spectroscopy, respectively. For the simultaneous determination of aflatoxins B₁, B₂, G₁, G₂ and the total aflatoxins, partial least squares regression also showed good predictive accuracy for both NIR (r_v  = 0.936-0.973, RPD = 2.5-4.0) and MIR spectroscopy (r_v  = 0.922-0.970, RPD = 2.5-4.0). The overall results indicated that the two spectroscopic techniques offered the feasibility to be used as alternative tools for rapid detection of various aflatoxin contaminations in grain.

Solid phase extraction as sample treatment for the determination of Ochratoxin A in foods: A review

Ochratoxin A (OTA) is a mycotoxin produced by two main types of fungi, Aspergillus and Penicillium species. OTA is a natural contaminant found in a large number of different matrices and is considered as a possible carcinogen for humans. Hence, low maximum permitted levels in foods have been established by competent authorities around the world, making essential the use of very sensitive analytical methods for OTA detection. Sample treatment is a crucial step of analytical methodology to get clean and concentrated extracts, and therefore low limits of quantification. Solid phase extraction (SPE) is a useful technique for rapid and selective sample preparation. This sample treatment enables the concentration and purification of analytes from the sample solution or extract by sorption on a solid sorbent. This review is focused on sample treatment procedures based on SPE prior to the determination of OTA in food matrices, published from 2010.

Modulation of Intestinal Epithelial Permeability in Differentiated Caco-2 Cells Exposed to Aflatoxin M1 and Ochratoxin A Individually or Collectively

Aflatoxin M1 (AFM1) and ochratoxin A (OTA) are mycotoxins commonly found in milk; however, their effects on intestinal epithelial cells have not been reported. In the present study, we show that AFM1 (0.12 and 12 μM) and OTA (0.2 and 20 μM) individually or collectively increased the paracellular flux of lucifer yellow and fluorescein isothiocyanate (FITC)-dextrans (4 and 40 kDa) and decreased transepithelial electrical resistance values in differentiated Caco-2 cells after 48 h of exposure, indicating increased epithelial permeability. Immunoblotting and immunofluorescent analysis revealed that AFM1, OTA, and their combination decreased the expression levels of tight junction (TJ) proteins and disrupted their structures, namely, claudin-3, claudin-4, occludin, and zonula occludens-1 (ZO-1), and p44/42 mitogen-activated protein kinase (MAPK) partially involved in the mycotoxins-induced disruption of intestinal barrier. The effects of a combination of AFM1 and OTA on intestinal barrier function were more significant (p < 0.05) than those of AFM1 and OTA alone, yielding additive or synergistic effects. The additive or synergistic effects of AFM1 and OTA on intestinal barrier function might affect human health, especially in children, and toxin risks should be considered.

Achievements and Prospects in Electrochemical-Based Biosensing Platforms for Aflatoxin M₁ Detection in Milk and Dairy Products

Aflatoxins, which are mainly produced by Aspergillus flavus and parasiticus growing on plants and products stored under inappropriate conditions, represent the most studied group of mycotoxins. Contamination of human and animal milk with aflatoxin M₁, the hydroxylated metabolite of aflatoxin B₁, is an important health risk factor due to its carcinogenicity and mutagenicity. Due to the low concentration of this aflatoxin in milk and milk products, the analytical methods used for its quantification have to be highly sensitive, specific and simple. This paper presents an overview of the analytical methods, especially of the electrochemical immunosensors and aptasensors, used for determination of aflatoxin M₁.

Interaction of α- and β-zearalenols with β-cyclodextrins

Zearalenone (ZEN) is a mycotoxin produced by Fusarium fungi. ZEN primarily contaminates different cereals, and exerts a strong xenoestrogenic effect in animals and humans. ZEN is a fluorescent mycotoxin, although molecular interactions and microenvironmental changes significantly modify its spectral properties. During biotransformation, ZEN is converted into α-zearalenol (α-ZOL) and β-zearalenol (β-ZOL), the toxic metabolites of ZEN, which mimick the effect of estrogen. Cyclodextrins (CDs) are host molecules, and have been studied extensively; they can form stable complexes with several mycotoxins, including ZEN. However, information is limited regarding the interactions of CDs with ZOLs. Therefore, we studied the interactions of α- and β-ZOLs with native and six chemically modified β-CDs by fluorescence spectroscopy. Fluorescence enhancement during complex formation, as well as binding constants, were determined. To understand ZOL-CD interactions better, molecular modeling studies were also carried out. Both mycotoxin derivatives formed the most stable complexes with methylated and sulfobutylated CD-derivatives; however, the CD complexes of α-ZOL were significantly stronger than those of β-ZOL. The data presented here indicate which of the chemically modified β-CDs appear more suitable as fluorescence enhancers or as potential mycotoxin binders.

Short communication: Analysis of mycotoxins in Spanish milk

We surveyed the presence of 22 mycotoxins in 191 Spanish cow milk samples. Mycotoxins could be carried over from diet into animal milk and have toxic effects on human and animal health. The interaction of different mycotoxins may be additive or synergetic. Therefore, surveillance of mycotoxin co-occurrence in milk is recommended. Aflatoxins M₁, B₁, B₂, G₁, and G₂, ochratoxins A and B, nivalenol, deoxynivalenol, deepoxy-deoxynivalenol, 3- and 15-acetyldeoxynivalenol, diacetoxyscirpenol, neosolaniol, fusarenon X, T-2 and HT-2 toxins, fumonisins B₁, B₂, and B₃, sterigmatocystin, and zearalenone were analyzed. Samples were treated by liquid-liquid extraction with acidified acetonitrile, followed by an acetonitrile-water phase separation using sodium acetate. The analysis was carried out by HPLC coupled to a triple quadrupole mass spectrometer. None of the analyzed mycotoxins had a concentration level higher than their detection limit (0.05-10.1 µg/L). The aflatoxin M₁ in the samples never exceeded the level established by the European Union.

Recent Advances in Mycotoxin Determination for Food Monitoring via Microchip

Mycotoxins are one of the main factors impacting food safety. Mycotoxin contamination has threatened the health of humans and animals. Conventional methods for the detection of mycotoxins are gas chromatography (GC) or liquid chromatography (LC) coupled with mass spectrometry (MS), or enzyme-linked immunosorbent assay (ELISA). However, all these methods are time-consuming, require large-scale instruments and skilled technicians, and consume large amounts of hazardous regents and solvents. Interestingly, a microchip requires less sample consumption and short analysis time, and can realize the integration, miniaturization, and high-throughput detection of the samples. Hence, the application of a microchip for the detection of mycotoxins can make up for the deficiency of the conventional detection methods. This review focuses on the application of a microchip to detect mycotoxins in foods. The toxicities of mycotoxins and the materials of the microchip are firstly summarized in turn. Then the application of a microchip that integrates various kinds of detection methods (optical, electrochemical, photo-electrochemical, and label-free detection) to detect mycotoxins is reviewed in detail. Finally, challenges and future research directions in the development of a microchip to detect mycotoxins are previewed.

Visual electrochemiluminescence biosensing of aflatoxin M1 based on luminol-functionalized, silver nanoparticle-decorated graphene oxide

A sensitive electrochemiluminescence (ECL) aptasensor for aflatoxin M1 (AFM1) detection by a closed bipolar electrode (BPE) array has been introduced. The thiolated AFM1 aptamer was immobilized on gold nanoparticle-coated magnetic Fe₃O₄ nanoparticles (Apt-GMNPs). Luminol-functionalized silver nanoparticle-decorated graphene oxide (GO-L-AgNPs) participates in π-π interactions with the unpaired bases of the immobilized aptamer (Apt-GMNPs-GO-L-AgNPs). After the Apt-GMNPs-GO-L-AgNPs were introduced to a gold anodic BPE array, the individual electrodes were subjected to different concentrations of AFM1. Upon the interaction of AFM1 with the aptamers, the GO-L-AgNPs detach from the aptamer; the resulting ECL of luminol and H₂O₂ at the anodic poles is monitored using a photomultiplier tube (PMT) or smartphone, and the images are analyzed using ImageJ software. This process triggers thionine reduction at the cathodic poles. Under the optimal conditions obtained by a face-centered central composite design (FCCD), the PMT-based detection of the BPE-ECL aptasensor exhibit a linear response over a wide dynamic range from 5 to 150ngmL^-1, with a detection limit of 0.01ngmL^-1. Additionally, smartphone-based detection shows a linear relationship between the ECL image gray value and the logarithmic concentration of the AFM1 target over a range of 10-200ngmL^-1, with a detection limit of 0.05ngmL^-1. Furthermore, the BPE-ECL aptasensor was successfully used to detect AFM1 in milk complex media without any serious interferences with reliable reproducibility (average relative standard deviation (RSD = 2.3%)). This smartphone-based detection opens a new horizon for bioanalysis that does not require a trained technician to operate and is a promising technology for point-of-care testing.

Risks for animal health related to the presence of zearalenone and its modified forms in feed

Zearalenone (ZEN), a mycotoxin primarily produced by Fusarium fungi, occurs predominantly in cereal grains. The European Commission asked EFSA for a scientific opinion on the risk to animal health related to ZEN and its modified forms in feed. Modified forms of ZEN occurring in feed include phase I metabolites α‐zearalenol (α‐ZEL), β‐zearalenol (β‐ZEL), α‐zearalanol (α‐ZAL), β‐zearalanol (β‐ZAL), zearalanone (ZAN) and phase II conjugates. ZEN has oestrogenic activity and the oestrogenic activity of the modified forms of ZEN differs considerably. For ZEN, the EFSA Panel on Contaminants in the Food Chain (CONTAM) established no observed adverse effect levels (NOAELs) for pig (piglets and gilts), poultry (chicken and fattening turkeys), sheep and fish (extrapolated from carp) and lowest observed effect level (LOAEL) for dogs. No reference points could be established for cattle, ducks, goats, horses, rabbits, mink and cats. For modified forms, no reference points could be established for any animal species and relative potency factors previously established from rodents by the CONTAM Panel in 2016 were used. The dietary exposure was estimated on 17,706 analytical results with high proportions of left‐censored data (ZEN about 60%, ZAN about 70%, others close to 100%). Samples for ZEN were collected between 2001 and 2015 in 25 different European countries, whereas samples for the modified forms were collected mostly between 2013 and 2015 from three Member States. Based on exposure estimates, the risk of adverse health effects of feed containing ZEN was considered extremely low for poultry and low for sheep, dog, pig and fish. The same conclusions also apply to the sum of ZEN and its modified forms.

Ultrasensitive detection of ochratoxin A using aptasensors

Regarding teratogenic, carcinogenic, and immunotoxic nature of ochratoxin A (OTA), selective and sensitive monitoring of this molecule in food samples is of great importance. In recent years, various methods have been introduced for detection of OTA. However, they are usually time-consuming, labor-intensive and expensive. Therefore, these parameters limited their usage. The emerging method of detection, aptasensor, has attracted more attention for OTA detection, due to distinctive advantages including high sensitivity, selectivity and simplicity. In this review, the new developed aptasensors for detection of OTA have been investigated. We also highlighted advantages and disadvantages of different types of OTA aptasensors. This review also takes into consideration the goal to find out which designs are the most rational ones for highly sensitive detection of OTA.