PNA for rapid microbiology

Biofilm formation with mixed cultures of Pseudomonas aeruginosa/Escherichia coli on silicone using artificial urine to mimic urinary catheters

In this study, single and dual species biofilms of Pseudomonas aeruginosa and Escherichia coli, two common bacteria associated with urinary tract infections, were formed in silicon coupons immersed in artificial urine medium. In single species experiments, E. coli appeared to form biofilms more easily than P. aeruginosa. In mixed biofilms, both species apparently benefited from the presence of the other, as the average Log total cells cm(-2) of mixed biofilms (7.29 cells cm(-2)) was higher than obtained for single cultures (6.99 cells cm(-2)). However, the use of selective media seemed to indicate that P. aeruginosa was the only microorganism to benefit in mixed biofilms (Log 7 CFU of P. aeruginosa cm(-2), compared to Log 6 CFU cm(-2) obtained in pure cultures). Peptide nucleic acid-fluorescence in situ hybridization combined with confocal laser scanning microscopy confirmed that E. coli was indeed being outnumbered by P. aeruginosa at 48 h. Whereas E. coli is the main causative agent of catheter-associated urinary tract infections, the results from this study indicate that the reason for the higher prevalence of this microorganism is not related to an enhanced ability to form biofilm and outcompete other species that may also be present, but rather to a better ability to form single-species biofilms possibly due to a more frequent access to the catheter surface.

Bacteriophage based probes for pathogen detection

Rapid and specific detection of pathogenic bacteria is important for the proper treatment, containment and prevention of human, animal and plant diseases. Identifying unique biological probes to achieve a high degree of specificity and minimize false positives has therefore garnered much interest in recent years. Bacteriophages are obligate intracellular parasites that subvert bacterial cell resources for their own multiplication and production of disseminative new virions, which repeat the cycle by binding specifically to the host surface receptors and injecting genetic material into the bacterial cells. The precision of host recognition in phages is imparted by the receptor binding proteins (RBPs) that are often located in the tail-spike or tail fiber protein assemblies of the virions. Phage host recognition specificity has been traditionally exploited for bacterial typing using laborious and time consuming bacterial growth assays. At the same time this feature makes phage virions or RBPs an excellent choice for the development of probes capable of selectively capturing bacteria on solid surfaces with subsequent quick and automatic detection of the binding event. This review focuses on the description of pathogen detection approaches based on immobilized phage virions as well as pure recombinant RBPs. Specific advantages of RBP-based molecular probes are also discussed.

A field-deployable colorimetric bioassay for the rapid and specific detection of ribosomal RNA

Rapid and specific on-site detection of disease-causing or toxin-producing organisms is essential to public health and safety. Many molecular recognition methods target ribosomal RNA sequences due to their specificity and abundance in the cell. In this work RNA targets were identified and quantified using a colorimetric bioassay. Peptide nucleic acid (PNA) probes were used to capture RNA targets, and a micrococcal nuclease digestion was performed to remove all non-target nucleic acids, including single base mismatches flanked by adenines or uracils. Perfectly-matched PNA-RNA hybrids remained intact and were detected using the symmetrical cyanine dye 3,3'-diethylthiadicarbocyanine iodide (DiSC2(5)). Assay applicability to complex samples was demonstrated using mixtures containing RNA sequences from two related, harmful algal bloom-causing Alexandrium species. Target RNA was detected even in mixtures with mismatched sequences in excess of the perfect match. The fieldability of the assay was tested with a portable two-wavelength colorimeter developed to quantify the dye-indicated hybridization signal. The colorimeter sensing performance was shown to be comparable to a laboratory spectrophotometer. This quick, inexpensive and robust system has the potential to replace laborious identification schemes in field environments.

Evaluation of repetitive sequence PCR and PCR-mass spectrometry for the identification of clinically relevant Candida species

The application of molecular diagnostic methods may improve the timeliness and accuracy with which fungi are identified. A total of 76 well-characterized reference strains of clinically relevant Candida species and 61 clinical Candida isolates were tested by repetitive sequence PCR (rep-PCR) and PCR followed by electrospray ionization mass spectrometry (PCR/ESI-MS) and results compared against internal transcribed spacer (ITS) ribosomal RNA gene sequencing as a reference standard. Both rep-PCR and PCR/ESI-MS correctly identified 51 isolates to the species level. When method performance was evaluated based only on genospecies included in the reference libraries, both methods yielded an accuracy of 98.1%. It may be concluded that rep-PCR and PCR/ESI-MS are highly effective at identifying clinical isolates of Candida to the species level. These methods hold promise for improving the speed and accuracy of identification of Candida spp. in clinical mycology laboratories.

Application of flow cytometry for the identification of Staphylococcus epidermidis by peptide nucleic acid fluorescence in situ hybridization (PNA FISH) in blood samples

Staphylococcus epidermidis is considered to be one of the most common causes of nosocomial bloodstream infections, particularly in immune-compromised individuals. Here, we report the development and application of a novel peptide nucleic acid probe for the specific detection of S. epidermidis by fluorescence in situ hybridization. The theoretical estimates of probe matching specificity and sensitivity were 89 and 87%, respectively. More importantly, the probe was shown not to hybridize with closely related species such as Staphylococcus aureus. The method was subsequently successfully adapted for the detection of S. epidermidis in mixed-species blood cultures both by microscopy and flow cytometry.

PNA-FISH as a new diagnostic method for the determination of clarithromycin resistance of Helicobacter pylori

BACKGROUND

Triple therapy is the gold standard treatment for Helicobacter pylori eradication from the human stomach, but increased resistance to clarithromycin became the main factor of treatment failure. Until now, fastidious culturing methods are generally the method of choice to assess resistance status. In this study, a new genotypic method to detect clarithromycin resistance in clinical samples, based on fluorescent in situ hybridization (FISH) using a set of peptide nucleic acid probes (PNA), is proposed.

RESULTS

The set of probes targeting the point mutations responsible for clarithromycin resistance was applied to H. pylori suspensions and showed 100% sensitivity and specificity (95% CI, 79.9-100 and 95% CI, 71.6-100 respectively). This method can also be amenable for application to gastric biopsy samples, as resistance to clarithromycin was also detected when histological slides were tested.

CONCLUSIONS

The optimized PNA-FISH based diagnostic method to detect H. pylori clarithromycin resistance shown to be a very sensitive and specific method for the detection of clarithromycin resistance in the H. pylori smears and also proved to be a reliable method for the diagnosis of this pathogen in clinical samples and an alternative to existing plating methods.

Discriminating multi-species populations in biofilms with peptide nucleic acid fluorescence in situ hybridization (PNA FISH)

BACKGROUND

Our current understanding of biofilms indicates that these structures are typically composed of many different microbial species. However, the lack of reliable techniques for the discrimination of each population has meant that studies focusing on multi-species biofilms are scarce and typically generate qualitative rather than quantitative data.

METHODOLOGY/PRINCIPAL FINDINGS

We employ peptide nucleic acid fluorescence in situ hybridization (PNA FISH) methods to quantify and visualize mixed biofilm populations. As a case study, we present the characterization of Salmonella enterica/Listeria monocytogenes/Escherichia coli single, dual and tri-species biofilms in seven different support materials. Ex-situ, we were able to monitor quantitatively the populations of ∼56 mixed species biofilms up to 48 h, regardless of the support material. In situ, a correct quantification remained more elusive, but a qualitative understanding of biofilm structure and composition is clearly possible by confocal laser scanning microscopy (CLSM) at least up to 192 h. Combining the data obtained from PNA FISH/CLSM with data from other established techniques and from calculated microbial parameters, we were able to develop a model for this tri-species biofilm. The higher growth rate and exopolymer production ability of E. coli probably led this microorganism to outcompete the other two [average cell numbers (cells/cm(2)) for 48 h biofilm: E. coli 2,1 × 10(8) (± 2,4 × 10(7)); L. monocytogenes 6,8 × 10(7) (± 9,4 × 10(6)); and S. enterica 1,4 × 10(6) (± 4,1 × 10(5))]. This overgrowth was confirmed by CSLM, with two well-defined layers being easily identified: the top one with E. coli, and the bottom one with mixed regions of L. monocytogenes and S. enterica.

SIGNIFICANCE

While PNA FISH has been described previously for the qualitative study of biofilm populations, the present investigation demonstrates that it can also be used for the accurate quantification and spatial distribution of species in polymicrobial communities. Thus, it facilitates the understanding of interspecies interactions and how these are affected by changes in the surrounding environment.

Food analysis and food authentication by peptide nucleic acid (PNA)-based technologies

This tutorial review will address the issue of DNA determination in food by using Peptide Nucleic Acid (PNA) probes with different technological platforms, with a particular emphasis on the applications devoted to food authentication. After an introduction aimed at describing PNAs structure, binding properties and their use as genetic probes, the review will then focus specifically on the use of PNAs in the field of food analysis. In particular, the following issues will be considered: detection of genetically modified organisms (GMOs), of hidden allergens, of microbial pathogens and determination of ingredient authenticity. Finally, the future perspectives for the use of PNAs in food analysis will be briefly discussed according to the most recent developments.

Fluorescence in situ hybridization method using a peptide nucleic acid probe for identification of Salmonella spp. in a broad spectrum of samples

A fluorescence in situ hybridization (FISH) method for the rapid detection of Salmonella spp. using a novel peptide nucleic acid (PNA) probe was developed. The probe theoretical specificity and sensitivity were both 100%. The PNA-FISH method was optimized, and laboratory testing on representative strains from the Salmonella genus subspecies and several related bacterial species confirmed the predicted theoretical values of specificity and sensitivity. The PNA-FISH method has been successfully adapted to detect cells in suspension and is hence able to be employed for the detection of this bacterium in blood, feces, water, and powdered infant formula (PIF). The blood and PIF samples were artificially contaminated with decreasing pathogen concentrations. After the use of an enrichment step, the PNA-FISH method was able to detect 1 CFU per 10 ml of blood (5 x 10(9) +/- 5 x 10(8) CFU/ml after an overnight enrichment step) and also 1 CFU per 10 g of PIF (2 x 10(7) +/- 5 x 10(6) CFU/ml after an 8-h enrichment step). The feces and water samples were also enriched according to the corresponding International Organization for Standardization methods, and results showed that the PNA-FISH method was able to detect Salmonella immediately after the first enrichment step was conducted. Moreover, the probe was able to discriminate the bacterium in a mixed microbial population in feces and water by counter-staining with 4',6-diamidino-2-phenylindole (DAPI). This new method is applicable to a broad spectrum of samples and takes less than 20 h to obtain a diagnosis, except for PIF samples, where the analysis takes less than 12 h. This procedure may be used for food processing and municipal water control and also in clinical settings, representing an improved alternative to culture-based techniques and to the existing Salmonella PNA probe, Sal23S10, which presents a lower specificity.

Label-free and real-time sequence specific DNA detection based on supramolecular self-assembly

A new label-free, optical method was developed to detect sequence-specific DNA based on supramolecular self-assembly. A cationic phenylene ethynylene oligomer with two pairs of positively charged side chains (OPE-2) can form a J-dimer or J-aggregate with negatively charged DNA by a combination of electrostatic and hydrophobic interactions. At microM concentrations of dsDNA (number of bases in ssDNA ranges from 8 to 32), the optimum supramolecular self-assembly occurs between OPE-2 and dsDNA and is characterized by a new absorption peak emerging at 418 nm and an increase in fluorescence intensity (about 4.5-fold for dsDNA(1)). In contrast, the self-assembled complexes between OPE-2 and ssDNA are less readily formed under the same conditions. Interestingly, the induced circular dichroism (CD) signal for OPE-2/ssDNA is quite strong, likely owing to the self-assembly onto ssDNA simultaneously templating helix formation. In contrast, the induced CD signal for OPE-2/dsDNA is weak, likely because the dsDNA is in a double helix conformation, and OPE-2 associated with the dsDNA should be outside of the helix. In fact, there is a steady decrease in the induced CD signal for ssDNA with the addition of equimolar complementary ssDNA over time that allows the monitoring of DNA hybridization in real time. Introduction of mismatched bases into the target DNA sequence prevents the full hybridization between ssDNA and the target DNA. For these cases, the decrease in the induced CD signals occurs more slowly and to a lesser extent, as some of the unhybridized portions may remain in helical association with OPE-2. In view of these observed signal changes, sequence specific DNA and single nucleotide mismatch can be detected in a very simple and sensitive manner without any modification of the DNA.

Current status and future perspectives on molecular and serological methods in diagnostic mycology

Invasive fungal infections are an important cause of infectious morbidity. Nonculture-based methods are increasingly used for rapid, accurate diagnosis to improve patient outcomes. New and existing DNA amplification platforms have high sensitivity and specificity for direct detection and identification of fungi in clinical specimens. Since laboratories are increasingly reliant on DNA sequencing for fungal identification, measures to improve sequence interpretation should support validation of reference isolates and quality control in public gene repositories. Novel technologies (e.g., isothermal and PNA FISH methods), platforms enabling high-throughput analyses (e.g., DNA microarrays and Luminex® xMAP™) and/or commercial PCR assays warrant further evaluation for routine diagnostic use. Notwithstanding the advantages of molecular tests, serological assays remain clinically useful for patient management. The serum Aspergillus galactomannan test has been incorporated into diagnostic algorithms of invasive aspergillosis. Both the galactomannan and the serum β-D-glucan test have value for diagnosing infection and monitoring therapeutic response.

Introduction of disulfide bond to the main chain of PNA to switch its hybridization and invasion activity

In order to facilitate the removal of peptide nucleic acid (PNA), when necessary, from its duplexes and invasion complexes, a disulfide bond was introduced to its main chain. The disulfide bond was readily cleaved by various reducing agents (2-mercaptoethanol, dl-dithiothreitol, and tris(2-carboxyethyl)phosphine) even when the PNA was forming a duplex with its complementary DNA. The resultant two short PNA fragments were spontaneously removed from the DNA. Double-duplex invasion complexes of two disulfide-containing PNA strands were also promptly cleaved by the reducing agents. By using this modified PNA, a desired DNA fragment was picked up from DNA mixtures, and obtained in a pure form (free from the PNA) by the reductive treatment. Importantly, this separation was achieved at low temperatures (e.g., 37 degrees C), where all the DNAs (and other biomolecules if any) should be kept intact. Strong potential of the modified PNA for various biological applications has been indicated.

Rapid detection of Streptococcus agalactiae from swabs by peptide nucleic acid fluorescence in situ hybridization

The applicability of the PNA FISH (peptide nucleic acid fluorescence in situ hybridization) method for detection of Streptococcus agalactiae [group B streptococci (GBS)] from swab samples was evaluated. Three swab-sample-processing protocols with different time-to-result (TTR) values were compared: (i) direct smearing of fresh swabs onto microscope slides (n=153, TTR 2.5 h), (ii) further extraction and concentration of cells from these same swabs (n=153, TTR 2.7 h), and (iii) short-term LIM broth enrichment culture incubation (7 h, 37 degrees C) of fresh swabs (n=120, TTR 9.5 h). The sensitivity, specificity, positive predictive value and negative predictive value for GBS PNA FISH for sample processing procedures, with TTR values of 2.5, 2.7 and 9.5 h, were 68, 100, 100 and 95 %; 91, 100, 100 and 98 %; and 100, 100, 100 and 100 %; respectively. Improved test results were achieved by subjecting swabs to an extraction procedure or abbreviated LIM broth enrichment culture incubation prior to performing GBS PNA FISH.

Development and application of a novel peptide nucleic acid probe for the specific detection of Cronobacter genomospecies (Enterobacter sakazakii) in powdered infant formula

Here, we report a fluorescence in situ hybridization (FISH) method for rapid detection of Cronobacter strains in powdered infant formula (PIF) using a novel peptide nucleic acid (PNA) probe. Laboratory tests with several Enterobacteriaceae species showed that the specificity and sensitivity of the method were 100%. FISH using PNA could detect as few as 1 CFU per 10 g of Cronobacter in PIF after an 8-h enrichment step, even in a mixed population containing bacterial contaminants.

DNA mimics for the rapid identification of microorganisms by fluorescence in situ hybridization (FISH)

Fluorescence in situ hybridization (FISH) is a well-established technique that is used for a variety of purposes, ranging from pathogen detection in clinical diagnostics to the determination of chromosomal stability in stem cell research. The key step of FISH involves the detection of a nucleic acid region and as such, DNA molecules have typically been used to probe for the sequences of interest. However, since the turn of the century, an increasing number of laboratories have started to move on to the more robust DNA mimics methods, most notably peptide and locked nucleic acids (PNA and LNA). In this review, we will cover the state-of-the-art of the different DNA mimics in regard to their application as efficient markers for the presence of individual microbial cells, and consider their potential advantages and pitfalls. Available PNA probes are then reassessed in terms of sensitivity and specificity using rRNA databases. In addition, we also attempt to predict the applicability of DNA mimics in well-known techniques attempting to detect in situ low number of copies of specific nucleic acid sequences such as catalyzed reporter deposition (CARD) and recognition of individual genes (RING) FISH.

Labeling of bacterial pathogens for flow cytometric detection and enumeration

Traditional uses of flow cytometry have been for research and diagnostic purposes, on mammalian cells. This unit focuses on using a flow cytometer for enumerating specific bacteria and parasites. Several different labeling methods are discussed, as well as how to set up a cytometer for detecting and enumerating bacteria. Labeling methods include direct detection with a primary fluorochrome-conjugated antibody and indirect labeling with an unconjugated primary and a fluorochrome-conjugated secondary antibody, as well as labeling with rRNA sequence-specific peptide nucleic-acid probes end-labeled with a fluorochrome. Data and methods throughout this unit focus on detection of Salmonella in clean matrices; however, pertinent information is also provided on using these methods to label other pathogens. The Commentary covers critical aspects of the protocols, and also includes information and suggestions on the application of these methods for testing in the food and pharmaceutical industries, as well as in environmental water testing.

Detection of group B streptococci in Lim broth by use of group B streptococcus peptide nucleic acid fluorescent in situ hybridization and selective and nonselective agars

The sensitivity, specificity, and positive and negative predictive values for the detection of group B streptococci from Lim enrichment broth with sheep blood agar (SBA), with selective Streptococcus agar (SSA), and by a peptide nucleic acid fluorescent in situ hybridization (PNA FISH) assay were as follows: for culture on SBA, 68.4%, 100%, 100%, and 87.9%, respectively; for culture on SSA, 85.5%, 100%, 100%, and 94.1%, respectively; and for the PNA FISH assay, 97.4%, 98.3%, 96.1%, and 98.9%, respectively.

Label-free selective DNA detection with high mismatch recognition by PNA beacons and ion exchange HPLC

Two 11mer peptide nucleic acid (PNA) beacons were synthesized and tested for the detection of full-matched or single mismatched DNA. Fluorescent measurements carried out in solution showed only partial discrimination of the mismatched sequence, while using anion-exchange HPLC, in combination with fluorimetric detection, allowed DNA analysis to be performed with high sensitivity and extremely high sequence selectivity. Up to >90 : 1 signal discrimination in the presence of one single mismatched base was observed. The analysis was tested on both short and long DNA oligomers. Detection of DNA obtained from PCR amplification was also performed allowing the selective detection of the target sequence in complex mixtures. Label free detection of the DNA with high sequence selectivity is therefore possible using the present approach.

PNA/dsDNA complexes: site specific binding and dsDNA biosensor applications

The ability of peptide nucleic acids (PNA) to form specific higher-order (i.e., three- and four-stranded) complexes with DNA makes it an ideal structural probe for designing strand-specific dsDNA biosensors. Higher-order complexes are formed between a dye-labeled charge-neutral PNA probe and complementary dsDNA. Addition of a light-harvesting cationic conjugated polymer (CCP) yields supramolecular structures held together by electrostatic forces that incorporate the CCP and the dye-labeled PNA/DNA complexes. Optimization of optical properties allows for excitation of the CCP and subsequent fluorescence resonance energy transfer (FRET) to the PNA-bound dye. In the case of noncomplementary dsDNA, complexation between the probe and target does not occur, and dye emission is weak. The binding between PNA and noncomplementary and complementary dsDNA was examined by several methods. Gel electrophoresis confirms specificity of binding and the formation of higher-order complexes. Nano-electrospray mass spectrometry gives insight into the stoichiometric composition, including PNA/DNA, PNA(2)/DNA, PNA/DNA(2), and PNA(2)/DNA(2) complexes. Finally, structural characteristics and binding-site specificity were examined using ion mobility mass spectrometry in conjunction with molecular dynamics. These results give possible conformations for each of the higher-order complexes formed and show exclusive binding of PNA to the complementary stretch of DNA for all PNA/DNA complexes. Overall, the capability and specificity of binding indicates that the CCP/PNA assay is a feasible detection method for dsDNA and eliminates the need for thermal denaturing steps typically required for DNA hybridization probe assays.

Development and application of a novel peptide nucleic acid probe for the specific detection of Helicobacter pylori in gastric biopsy specimens

In this work, a fluorescence in situ hybridization (FISH) method for the rapid detection of Helicobacter pylori using a novel peptide nucleic acid (PNA) probe is reported. Laboratory testing with several different bacterial species, including other Helicobacter spp., has shown that this probe is highly specific for H. pylori strains. In addition, the PNA FISH method has been successfully adapted for detection of the pathogen in paraffin-embedded gastric biopsy specimens.

Inducing the replacement of PNA in DNA.PNA duplexes by DNA

The uncharged DNA-analogue peptide nucleic acid (PNA) can invade into dsDNA by displacing the non-complementary DNA strand. The formed strand displacement complexes can create a sterical hindrance to block access of enzymes such as nucleases and polymerases. Due to the high stability of DNA.PNA duplexes it is usually not possible to displace the PNA strand by ssDNA or ssRNA. We herein report that the polycationic, comb-type copolymer alphaPLL-g-Dex can induce such a replacement of PNA in DNA.PNA duplexes by ssDNA. The influence of the copolymer on strand exchange highly depends on the nature of the oligonucleotides. Acceleration has only been observed when both the starting duplex and the single-stranded exchanger strand were negatively charged. The presented approach should allow the withdrawal of PNA induced sterical hindrance of DNA by rehybridisation with ssDNA.

Survival of Mycobacterium avium, Legionella pneumophila, Escherichia coli, and caliciviruses in drinking water-associated biofilms grown under high-shear turbulent flow

Most of the bacteria in drinking water distribution systems are associated with biofilms. In biofilms, their nutrient supply is better than in water, and biofilms can provide shelter against disinfection. We used a Propella biofilm reactor for studying the survival of Mycobacterium avium, Legionella pneumophila, Escherichia coli, and canine calicivirus (CaCV) (as a surrogate for human norovirus) in drinking water biofilms grown under high-shear turbulent-flow conditions. The numbers of M. avium and L. pneumophila were analyzed with both culture methods and with peptide nucleic acid fluorescence in situ hybridization (FISH) methods. Even though the numbers of pathogens in biofilms decreased during the experiments, M. avium and L. pneumophila survived in biofilms for more than 2 to 4 weeks in culturable forms. CaCV was detectable with a reverse transcription-PCR method in biofilms for more than 3 weeks. E. coli was detectable by culture for only 4 days in biofilms and 8 days in water, suggesting that it is a poor indicator of the presence of certain waterborne pathogens. With L. pneumophila and M. avium, culture methods underestimated the numbers of bacteria present compared to the FISH results. This study clearly proved that pathogenic bacteria entering water distribution systems can survive in biofilms for at least several weeks, even under conditions of high-shear turbulent flow, and may be a risk to water consumers. Also, considering the low number of virus particles needed to result in an infection, their extended survival in biofilms must be taken into account as a risk for the consumer.

Effect of terminal amino acids on the stability and specificity of PNA-DNA hybridisation

The effect of various charged or hydrophobic amino acids on the hybridisation of fully complementary and mismatch PNA-DNA duplexes was investigated via UV melting curve analysis. The results described here show that the thermal stability and binding specificity of PNA probes can be modified by conjugation to amino acids and these effects should be considered in experimental design when conjugating PNA sequences to solubility enhancing groups or cell transport peptides. Where stabilisation of a duplex is important, without there being a corresponding need for specific binding to fully complementary targets, the conjugation of multiple lysine residues to the C-terminus of PNA may be the best probe design. If, however, the key is to obtain maximum discrimination between fully complementary and mismatch targets, a replacement of glutamic acid for lysine as the routine solubility enhancing group is recommended.

Simple detection of small amounts of Pseudomonas cells in milk by using a microfluidic device

AIMS

Flow cytometry offers rapid and reliable analyses of bacteria in milk. However, a flow cytometer is relatively expensive and operation is rather complicated for an unskilled operator. We applied flow cytometry using a microfluidic device (on-chip flow cytometry) in detection of small amounts of milk-spoiling bacteria.

METHODS AND RESULTS

Pseudomonas cells in milk were in situ hybridized with Cy5-labelled probe specific for Pseudomonas spp. under optimized condition. Numbers of Pseudomonas cells in the stationary phase and in the starved state determined by on-chip flow cytometry were compared with those determined by conventional plate counting, and on-chip flow cytometry detected targeted cells in milk that were undetectable as colony forming units(CFU) on Standards Methods Agar.

CONCLUSIONS

The contamination in milk with fewer than 10 CFU ml(-1) of targeted cells in starved state was detectable with simple procedure (0.5 h milk-clearing, 1 h fixation, 2 h hybridization and 0.5 h on-chip flow cytometry following 12 h enrichment of cells).

SIGNIFICANCE AND IMPACT OF THE STUDY

On-chip flow cytometry following fluorescence in situ hybridization could be applicable to simple detection of milk-spoiling bacteria.

Evaluation of in situ methods used to detect Mycobacterium avium subsp. paratuberculosis in samples from patients with Crohn's disease

In common with other diagnostic tests, detection of mycobacteria in tissue by microscopic examination is susceptible to spectrum bias. Since Crohn's disease is defined by the absence of detectable pathogenic organisms, the use of in situ techniques to search for Mycobacterium avium subsp. paratuberculosis in Crohn's disease samples requires validation of methods in a paucibacillary setting. To generate paucibacillary infection, C57BL/6 mice were artificially infected with Mycobacterium avium subsp. paratuberculosis strain K10 and M. tuberculosis H37Rv, yielding tissues harboring fewer than one bacillus per oil immersion field. Serial sections of organs were then studied by cell wall-based staining techniques (Ziehl-Neelsen and auramine rhodamine) and nucleic acid-based staining techniques (in situ hybridization [ISH] and indirect in situ PCR [IS PCR]). Microscopic examination and measurement of morphometric parameters of bacilli revealed that for all methods, Mycobacterium avium subsp. paratuberculosis bacilli were observed to be shorter, smaller, and less rod shaped than M. tuberculosis bacilli. Ziehl-Neelsen, auramine rhodamine stains, ISH targeting rRNA, and IS-PCR targeting the IS900 element afforded comparable sensitivities, but for all methods, visualization of individual bacterial forms required magnification x1,000. Auramine rhodamine staining and IS-PCR generated positive signals in negative controls, indicating the nonspecificity of these assays. Together, our results indicate that detection of Mycobacterium avium subsp. paratuberculosis bacilli in tissue requires oil immersion microscopy, that rRNA-ISH provides sensitivity and specificity comparable to those of Ziehl-Neelsen staining, and that the microscopic detection limit for Mycobacterium avium subsp. paratuberculosis in tissue is governed more by bacterial burden than by staining method.

Targeting species-specific low-affinity 16S rRNA binding sites by using peptide nucleic acids for detection of Legionellae in biofilms

Using fluorescence in situ hybridization to detect bacterial groups has several inherent limitations. DNA probes are generally used, targeting sites on the 16S rRNA. However, much of the 16S rRNA is highly conserved, with variable regions often located in inaccessible areas where secondary structures can restrict probe access. Here, we describe the use of peptide nucleic acid (PNA) probes as a superior alternative to DNA probes, especially when used for environmental samples. A complex bacterial genus (Legionella) was studied, and two probes were designed, one to detect all species and one targeted to Legionella pneumophila. These probes were developed from existing sequences and are targeted to low-binding-affinity sites on the 16S rRNA. In total, 47 strains of Legionella were tested. In all cases, the Legionella spp. PNA probe labeled cells strongly but did not bind to any non-Legionella species. Likewise, the specific L. pneumophila PNA probe labeled only strains of L. pneumophila. By contrast, the equivalent DNA probes performed poorly. To assess the applicability of this method for use on environmental samples, drinking-water biofilms were spiked with a known concentration of L. pneumophila bacteria. Quantifications of the L. pneumophila bacteria were compared using PNA hybridization and standard culture methods. The culture method quantified only 10% of the number of L. pneumophila bacteria found by PNA hybridization. This illustrates the value of this method for use on complex environmental samples, especially where cells may be in a viable but noncultivable state.

Evaluation of peptide nucleic acid-fluorescence in situ hybridization for identification of clinically relevant mycobacteria in clinical specimens and tissue sections

With fluorescently labeled PNA (peptide nucleic acid) probes targeting 16S rRNA, we established a 3-h fluorescence in situ hybridization (FISH) procedure for specific visualization of members of the Mycobacterium tuberculosis complex, M. leprae, M. avium, and M. kansasii. Probe specificity was tested against a panel of 25 Mycobacterium spp. and 10 gram-positive organisms. After validation, probes were used to identify 52 mycobacterial culture isolates. Results were compared to conventional genotypic identification with amplification-based methods. All isolates (M. tuberculosis complex, n = 24; M. avium, n = 7; M. kansasii, n = 1) were correctly identified by FISH. In addition, the technique was used successfully for visualization of mycobacteria in biopsies from infected humans or animals. In conclusion, PNA-FISH is a fast and accurate tool for species-specific identification of culture-grown mycobacteria and for direct visualization of these organisms in tissue sections. It may be used successfully for both research and clinical microbiology.

Recent developments in bio-molecular electronics techniques for food pathogens

Food borne illnesses contribute to the majority of infections caused by pathogenic microorganisms. Detection of these pathogens originating from different sources has led to increased interest of researchers. New bio-molecular techniques for food pathogen detection are being developed to improve the sensor characteristics such as sensitivity, reusability, simplicity and economic viability. Present article deals with the various methods of food pathogen detection with special emphasis on bio-molecular electronics techniques such as biosensors, microarrays, electronic nose, and nano-materials based methods.

Fluorescence in situ hybridization using peptide nucleic acid probes for rapid detection of Mycobacterium avium subsp. avium and Mycobacterium avium subsp. paratuberculosis in potable-water biofilms

Here, we present for the first time a high-affinity peptide nucleic acid (PNA) oligonucleotide sequence for detecting Mycobacterium avium bacteria, including the opportunistically pathogenic subspecies M. avium subsp. avium, M. avium subsp. paratuberculosis, and M. avium subsp. silvaticum, by the fluorescence in situ hybridization (FISH) method. There is evidence that M. avium subsp. avium especially is able to survive and grow in drinking-water biofilms and possibly transmit via drinking water. The designed PNA probe (MAV148) specificity was tested with several bacterial species, including other mycobacteria and mycolic acid-containing bacteria. From the range of bacterial strains tested, only M. avium subsp. avium and M. avium subsp. paratuberculosis strains were hybridized. The PNA FISH method was applied successfully to detect M. avium subsp. avium spiked in water samples and biofilm established within a Propella biofilm reactor fed with potable water from a distribution supply.

Design and evaluation of 16S rRNA-targeted peptide nucleic acid probes for whole-cell detection of members of the genus Listeria

Six fluorescein-labeled peptide nucleic acid oligomers targeting Listeria-specific sequences on the 16S ribosomal subunit were evaluated for their abilities to hybridize to whole cells by fluorescence in situ hybridization (FISH). Four of these probes yielded weak or no fluorescent signals after hybridization and were not investigated further. The remaining two FISH-compatible probes, LisUn-3 and LisUn-11, were evaluated for their reactivities against 22 Listeria strains and 17 other bacterial strains belonging to 10 closely related genera. Hybridization with BacUni-1, a domain-specific eubacterial probe, was used as a positive control for target accessibility in both Listeria spp. and nontarget cells. RNase T1 treatment of select cell types was used to confirm that positive fluorescence responses were rRNA dependent and to examine the extent of nonspecific staining of nontarget cells. Both LisUn-3 and LisUn-11 yielded rapid, bright, and genus-specific hybridizations at probe concentrations of approximately 100 pmol ml(-1). LisUn-11 was the brightest probe and stained all six Listeria species. LisUn-3 hybridized with all Listeria spp. except for L. grayi, for which it had two mismatched bases. A simple ethanolic fixation yielded superior results with Listeria spp. compared to fixation in 10% buffered formalin and was applicable to all cell types studied. This study highlights the advantages of peptide nucleic acid probes for FISH-based detection of gram-positive bacteria and provides new tools for the rapid detection of Listeria spp. These probes may be useful for the routine monitoring of food production environments in support of efforts to control L. monocytogenes.

The peptide nucleic acids (PNAs): a new generation of probes for genetic and cytogenetic analyses

Peptide nucleic acids (PNAs) are synthetic homologs of nucleic acids in which the phosphate-sugar polynucleotide backbone is replaced by a flexible pseudo-peptide polymer to which the nucleobases are linked. This structure gives PNAs the capacity to hybridize with high affinity and specificity to complementary sequences of DNA and RNA, and also confers remarkable resistance to DNAses and proteinases. The unique physico-chemical characteristics of PNAs have led to the development of a wide range of biological assays. Several exciting new applications of PNA technology have been published recently in genetics and cytogenetics. Also, PNA-based hybridization technology is developing rapidly within the field of in situ fluorescence hybridization, pointing out the great potential of PNA probes for chromosomal investigations.

Fluorinated olefinic peptide nucleic acid: synthesis and pairing properties with complementary DNA

The fluorinated olefinic peptide nucleic acid (F-OPA) system was designed as a peptide nucleic acid (PNA) analogue in which the base carrying amide moiety was replaced by an isostructural and isoelectrostatic fluorinated C-C double bond, locking the nucleobases in one of the two possible rotameric forms. By comparison of the base-pairing properties of this analogue with its nonfluorinated analogue OPA and PNA, we aimed at a closer understanding of the role of this amide function in complementary DNA recognition. Here we present the synthesis of the F-OPA monomer building blocks containing the nucleobases A, T, and G according to the MMTr/Acyl protecting group scheme. Key steps are a selective desymmetrization of the double bond in the monomer precursor via lactonization as well as a highly regioselective Mitsunobu reaction for the introduction of the bases. PNA decamers containing single F-OPA mutations and fully modified F-OPA decamers and pentadecamers containing the bases A and T were synthesized by solid-phase peptide chemistry, and their hybridization properties with complementary parallel and antiparallel DNA were assessed by UV melting curves and CD spectroscopic methods. The stability of the duplexes formed by the decamers containing single (Z)-F-OPA modifications with parallel and antiparallel DNA was found to be strongly dependent on their position in the sequence with T(m) values ranging from +2.4 to -8.1 degrees C/modification as compared to PNA. Fully modified F-OPA decamers and pentadecamers were found to form parallel duplexes with complementary DNA with reduced stability compared to PNA or OPA. An asymmetric F-OPA pentadecamer was found to form a stable self-complex (T(m) approximately 65 degrees C) of unknown structure. The generally reduced affinity to DNA may therefore be due to an increased propensity for self-aggregation.

Enumeration of respiring Pseudomonas spp. in milk within 6 hours by fluorescence in situ hybridization following formazan reduction

Respiring Pseudomonas spp. in milk were quantified within 6 h by fluorescence in situ hybridization (FISH) with vital staining. FISH with an oligonucleotide probe based on 16S rRNA sequences was used for the specific detection of Pseudomonas spp. at the single cell level. 5-cyano-2,3-ditolyl tetrazolium chloride (CTC) was used to estimate bacterial respiratory activity. The numbers of respiring Pseudomonas cells as determined by FISH with CTC staining (CTC-FISH) were almost the same or higher than the numbers of CFU as determined by the conventional culture method.

Detection of target DNA using fluorescent cationic polymer and peptide nucleic acid probes on solid support

Background

Nucleic acids detection using microarrays requires labelling of target nucleic acids with fluorophores or other reporter molecules prior to hybridization.

Results

Using surface-bound peptide nucleic acids (PNA) probes and soluble fluorescent cationic polythiophenes, we show a simple and sensitive electrostatic approach to detect and identify unlabelled target nucleic acid on microarray.

Conclusion

This simple methodology opens exciting possibilities for applied genetic analysis for the diagnosis of infections, identification of genetic mutations, and forensic inquiries. This electrostatic strategy could also be used with other nucleic acid detection methods such as electrochemistry, silver staining, metallization, quantum dots, or electrochemical dyes.

Improved permeabilization protocols for fluorescence in situ hybridization (FISH) of mycolic-acid-containing bacteria found in foams

Formation of thick, stable foams and scums on activated sludge wastewater treatment plants is a worldwide problem, and to better understand what causes this foam and to cure it, there is a need to identify and quantify the bacteria present there. Fluorescence in situ hybridisation (FISH) overcomes the difficulties experienced with microscopic methods of identification for the mycolic-acid-containing actinomycetes (the mycolata), which are present in foams, where many share the morphotype of right-angled branching filaments. However, the presence of hydrophobic mycolic acids in their cell wall makes this group of bacteria particularly difficult to permeabilise, which greatly reduces the usefulness of FISH. While several permeabilisation treatments have been described, none appear to adequately permeabilise all genera of the mycolata. In this study several protocols for permeabilisation were assessed with both pure cultures of selected genera of the mycolata and foam samples. Combining mild acid hydrolysis with enzyme treatments (either mutanolysin/lysozyme or lipase/proteinase K) was found to be the most effective method, although other evidence presented here suggests that negative FISH results can not always be explained in terms of cell permeability to the probes.

Advantages of peptide nucleic acid oligonucleotides for sensitive site directed 16S rRNA fluorescence in situ hybridization (FISH) detection of Campylobacter jejuni, Campylobacter coli and Campylobacter lari

Traditionally fluorescence in situ hybridization (FISH) has been performed with labeled DNA oligonucleotide probes. Here we present for the first time a high affinity peptide nucleic acid (PNA) oligonucleotide sequence for detecting thermotolerant Campylobacter spp. using FISH. Thermotolerant Campylobacter spp, including the species Campylobacter coli, Campylobacter jejuni and Campylobacter lari, are important food and water borne pathogens. The designed PNA probe (CJE195) bound with higher affinity to a previously reported low affinity site on the 16S rRNA than the corresponding DNA probe. PNA also overcame the problem of the lack of affinity due to the location of the binding site and the variation of the target sequence within species. The PNA probe specificity was tested with several bacterial species, including other Campylobacter spp. and their close relatives. All tested C. coli, C. jejuni and C. lari strains were hybridized successfully. Aging of the Campylobacter cultures caused the formation of coccoid forms, which did not hybridize as well as bacteria in the active growth phase, indicating that the probe could be used to assess the physiological status of targeted cells. The PNA FISH methodology detected C. coli by membrane filtration method from C. coli spiked drinking water samples.

Real-time Fluorescent PCR Techniques to Study Microbial-Host Interactions

This chapter describes how real-time polymerase chain reaction (PCR) performs and how it may be used to detect microbial pathogens and the relationship they form with their host. Research and diagnostic microbiology laboratories contain a mix of traditional and leading-edge, in-house and commercial assays for the detection of microbes and the effects they impart upon target tissues, organs, and systems. The PCR has undergone significant change over the last decade, to the extent that only a small proportion of scientists have been able or willing to keep abreast of the latest offerings. The chapter reviews these changes. It discusses the second-generation of PCR technology-kinetic or real-time PCR, a tool gaining widespread acceptance in many scientific disciplines but especially in the microbiology laboratory.

Single-cell microbiology: tools, technologies, and applications

The field of microbiology has traditionally been concerned with and focused on studies at the population level. Information on how cells respond to their environment, interact with each other, or undergo complex processes such as cellular differentiation or gene expression has been obtained mostly by inference from population-level data. Individual microorganisms, even those in supposedly "clonal" populations, may differ widely from each other in terms of their genetic composition, physiology, biochemistry, or behavior. This genetic and phenotypic heterogeneity has important practical consequences for a number of human interests, including antibiotic or biocide resistance, the productivity and stability of industrial fermentations, the efficacy of food preservatives, and the potential of pathogens to cause disease. New appreciation of the importance of cellular heterogeneity, coupled with recent advances in technology, has driven the development of new tools and techniques for the study of individual microbial cells. Because observations made at the single-cell level are not subject to the "averaging" effects characteristic of bulk-phase, population-level methods, they offer the unique capacity to observe discrete microbiological phenomena unavailable using traditional approaches. As a result, scientists have been able to characterize microorganisms, their activities, and their interactions at unprecedented levels of detail.

Time-resolved energy transfer in DNA sequence detection using water-soluble conjugated polymers: the role of electrostatic and hydrophobic interactions

We have investigated the energy transfer processes in DNA sequence detection by using cationic conjugated polymers and peptide nucleic acid (PNA) probes with ultrafast pump-dump-emission spectroscopy. Pump-dump-emission spectroscopy provides femtosecond temporal resolution and high sensitivity and avoids interference from the solvent response. The energy transfer from donor (the conjugated polymer) to acceptor (a fluorescent molecule attached to a PNA terminus) has been time resolved. The results indicate that both electrostatic and hydrophobic interactions contribute to the formation of cationic conjugated polymers/PNA-C/DNA complexes. The two interactions result in two different binding conformations. This picture is supported by the average donor-acceptor separations as estimated from time-resolved and steady-state measurements. Electrostatic interactions dominate at low concentrations and in mixed solvents.

Real-time PCR in the microbiology laboratory

Use of PCR in the field of molecular diagnostics has increased to the point where it is now accepted as the standard method for detecting nucleic acids from a number of sample and microbial types. However, conventional PCR was already an essential tool in the research laboratory. Real-time PCR has catalysed wider acceptance of PCR because it is more rapid, sensitive and reproducible, while the risk of carryover contamination is minimised. There is an increasing number of chemistries which are used to detect PCR products as they accumulate within a closed reaction vessel during real-time PCR. These include the non-specific DNA-binding fluorophores and the specific, fluorophore-labelled oligonucleotide probes, some of which will be discussed in detail. It is not only the technology that has changed with the introduction of real-time PCR. Accompanying changes have occurred in the traditional terminology of PCR, and these changes will be highlighted as they occur. Factors that have restricted the development of multiplex real-time PCR, as well as the role of real-time PCR in the quantitation and genotyping of the microbial causes of infectious disease, will also be discussed. Because the amplification hardware and the fluorogenic detection chemistries have evolved rapidly, this review aims to update the scientist on the current state of the art. Additionally, the advantages, limitations and general background of real-time PCR technology will be reviewed in the context of the microbiology laboratory.

PNA FISH: an intelligent stain for rapid diagnosis of infectious diseases

Fluorescence in situ hybridization using peptide nucleic acid probes (PNA FISH) is a novel diagnostic technique combining the simplicity of traditional staining procedures with the unique performance of PNA probes to provide rapid and accurate diagnosis of infectious diseases; a feature that makes PNA FISH well suited for routine application and enables clinical microbiology laboratories to report important information for patient therapy within a time frame not possible using classic biochemical methods. Having transitioned from an academic curiosity into an advanced diagnostic tool, PNA probes are now debuting on the infectious disease stage, representing the new generation of therapy-directing diagnostics.