Capture and stimulated release of circulating tumor cells on polymer-grafted silicon nanostructures

Open and closed microfluidics for biosensing

Biosensing is vital for many areas like disease diagnosis, infectious disease prevention, and point-of-care monitoring. Microfluidics has been evidenced to be a powerful tool for biosensing via integrating biological detection processes into a palm-size chip. Based on the chip structure, microfluidics has two subdivision types: open microfluidics and closed microfluidics, whose operation methods would be diverse. In this review, we summarize fundamentals, liquid control methods, and applications of open and closed microfluidics separately, point out the bottlenecks, and propose potential directions of microfluidics-based biosensing.

A Cascaded Phase-Transfer Microfluidic Chip with Magnetic Probe for High-Activity Sorting, Purification, Release, and Detection of Circulating Tumor Cells

Microfluidic chips have emerged as a promising tool for sorting and enriching circulating tumor cells (CTCs) in blood, while the efficacy and purity of CTC sorting greatly depend on chip design. Herein, a novel cascaded phase-transfer microfluidic chip was developed for high-efficiency sorting, purification, release, and detection of MCF-7 cells (as a model CTC) in blood samples. MCF-7 cells were specifically captured by EpCAM aptamer-modified magnetic beads and then introduced into the designed cascaded phase-transfer microfluidic chip that consisted of three functional regions (sorting, purification, and release zone). In the sorting zone, the MCF-7 cells moved toward the inner wall of the channel and entered the purification zone for primary separation from white blood cells; in the purification zone, the MCF-7 cells were transferred to the phosphate-buffered saline flow under the interaction of Dean forces and central magnetic force, achieving high purification of MCF-7 cells from blood samples; in the release zone, MCF-7 cells were further transferred into the nuclease solution and fixed in groove by the strong magnetic force and hydrodynamic force, and the continuously flowing nuclease solution cleaved the aptamer on the trapped MCF-7 cells, causing gentle release of MCF-7 cells for subsequent inductively coupled plasma mass spectrometry (ICP-MS) detection or further cultivation. By measurement of the endogenous element Zn in the cells using ICP-MS for cell counting, an average cell recovery of 84% for MCF-7 cells was obtained in spiked blood samples. The developed method was applied in the analysis of real blood samples from healthy people and breast cancer patients, and CTCs were successfully detected in all tested patient samples (16/16). Additionally, the removal of the magnetic probes on the cell surface significantly improved cell viability up to 99.3%. Therefore, the developed cascaded phase-transfer microfluidic chip ICP-MS system possessed high integration for CTCs analysis with high cell viability, cell recovery, and purity, showing great advantages in early clinical cancer diagnosis.

Strategy for Nonenzymatic Harvesting of Cells via Decoupling of Adhesive and Disjoining Domains of Nanostructured Stimulus-Responsive Polymer Films

The nanostructured polymer film introduces a novel mechanism of nonenzymatic cell harvesting by decoupling solid cell-adhesive and soft stimulus-responsive cell-disjoining areas on the surface. The key characteristics of this architecture are the decoupling of adhesion from detachment and the impermeability to the integrin protein complex of the adhesive domains. This surface design eliminates inherent limitations of thermoresponsive coatings, namely, the necessity for the precise thickness of the coating, grafting or cross-linking density, and material of the basal substrate. The concept is demonstrated with nanostructured thermoresponsive films made of cell-adhesive epoxy photoresist domains and cell-disjoining poly(N-isopropylacrylamide) brush domains.

Multistage microfluidic cell sorting method and chip based on size and stiffness

High performance sorting of circulating tumor cells (CTCs) from peripheral blood is key to liquid biopsies. Size-based deterministic lateral displacement (DLD) technique is widely used in cell sorting. But conventional microcolumns have poor fluid regulation ability, which limits the sorting performance of DLD. When the size difference between CTCs and leukocytes is small (e.g., less than 3 μm), not only DLD, many size-based separation techniques fail due to low specificity. CTCs have been confirmed to be softer than leukocytes, which could serve as a basis for sorting. In this study, we presented a multistage microfluidic CTCs sorting method, first sorting CTCs using a size-based two-array DLD chip, then purifying CTCs mixed by leukocytes using a stiffness-based cone channel chip, and finally identifying cell types using Raman techniques. The entire CTCs sorting and analysis process was label free, highly pure, high-throughput and efficient. The two-array DLD chip employed a droplet-shaped microcolumn (DMC) developed by optimization design rather than empirical design. Attributed to the excellent fluid regulation capability of DMC, the CTCs sorter system developed by parallelizing four DMC two-array DLD chips was able to process a sample of 2.5 mL per minute with a recovery efficiency of 96.30 ± 2.10% and a purity of 98.25 ± 2.48%. To isolate CTCs mixed dimensionally by leukocytes, a cone channel sorting method and chip were developed based on solid and hydrodynamic coupled analysis. The cone channel chip allowed CTCs to pass through the channel and entrap leukocytes, improving the purity of CTCs mixed by leukocytes by 1.8-fold.

A Micropillar Array Based Microfluidic Device for Rare Cell Detection and Single-Cell Proteomics

Advancements in single-cell-related technologies have opened new possibilities for analyzing rare cells, such as circulating tumor cells (CTCs) and rare immune cells. Among these techniques, single-cell proteomics, particularly single-cell mass spectrometric analysis (scMS), has gained significant attention due to its ability to directly measure transcripts without the need for specific reagents. However, the success of single-cell proteomics relies heavily on efficient sample preparation, as protein loss in low-concentration samples can profoundly impact the analysis. To address this challenge, an effective handling system for rare cells is essential for single-cell proteomic analysis. Herein, we propose a microfluidics-based method that offers highly efficient isolation, detection, and collection of rare cells (e.g., CTCs). The detailed fabrication process of the micropillar array-based microfluidic device is presented, along with its application for CTC isolation, identification, and collection for subsequent proteomic analysis.

Liposome-tethered supported lipid bilayer platform for capture and release of heterogeneous populations of circulating tumor cells

Because of scarcity, vulnerability, and heterogeneity in the population of circulating tumor cells (CTCs), the CTC isolation system relying on immunoaffinity interaction exhibits inconsistent efficiencies for all types of cancers and even CTCs with different phenotypes in individuals. Moreover, releasing viable CTCs from an isolation system is of importance for molecular analysis and drug screening in precision medicine, which remains a challenge for current systems. In this work, a new CTC isolation microfluidic platform was developed and contains a coating of the antibody-conjugated liposome-tethered-supported lipid bilayer in a developed chaotic-mixing microfluidic system, referred to as the "LIPO-SLB" platform. The biocompatible, soft, laterally fluidic, and antifouling properties of the LIPO-SLB platform offer high CTC capture efficiency, viability, and selectivity. We successfully demonstrated the capability of the LIPO-SLB platform to recapitulate different cancer cell lines with different antigen expression levels. In addition, the captured CTCs in the LIPO-SLB platform can be detached by air foam to destabilize the physically assembled bilayer structures due to a large water/air interfacial area and strong surface tension. More importantly, the LIPO-SLB platform was constructed and used for the verification of clinical samples from 161 patients with different primary cancer types. The mean values of both single CTCs and CTC clusters correlated well with the cancer stages. Moreover, a considerable number of CTCs were isolated from patients' blood samples in the early/localized stages. The clinical validation demonstrated the enormous potential of the universal LIPO-SLB platform as a tool for prognostic and predictive purposes in precision medicine.

Microfluidic systems for particle capture and release: A review

Microfluidic technology has emerged as a promising tool in various applications, including biosensing, disease diagnosis, and environmental monitoring. One of the notable features of microfluidic devices is their ability to selectively capture and release specific cells, biomolecules, bacteria, and particles. Compared to traditional bulk analysis instruments, microfluidic capture-and-release platforms offer several advantages, such as contactless operation, label-free detection, high accuracy, good sensitivity, and minimal reagent requirements. However, despite significant efforts dedicated to developing innovative capture mechanisms in the past, the release and recovery efficiency of trapped particles have often been overlooked. Many previous studies have focused primarily on particle capture techniques and their efficiency, disregarding the crucial role of successful particle release for subsequent analysis. In reality, the ability to effectively release trapped particles is particularly essential to ensure ongoing, high-throughput analysis. To address this gap, this review aims to highlight the importance of both capture and release mechanisms in microfluidic systems and assess their effectiveness. The methods are classified into two categories: those based on physical principles and those using biochemical approaches. Furthermore, the review offers a comprehensive summary of recent applications of microfluidic platforms specifically designed for particle capture and release. It outlines the designs and performance of these devices, highlighting their advantages and limitations in various target applications and purposes. Finally, the review concludes with discussions on the current challenges faced in the field and presents potential future directions.

Toward Personalized Nanomedicine: The Critical Evaluation of Micro and Nanodevices for Cancer Biomarker Analysis in Liquid Biopsy

Liquid biopsy for the analysis of circulating cancer biomarkers (CBs) is a major advancement toward the early detection of cancer. In comparison to tissue biopsy techniques, liquid biopsy is relatively painless, offering multiple sampling opportunities across easily accessible bodily fluids such as blood, urine, and saliva. Liquid biopsy is also relatively inexpensive and simple, avoiding the requirement for specialized laboratory equipment or trained medical staff. Major advances in the field of liquid biopsy are attributed largely to developments in nanotechnology and microfabrication that enables the creation of highly precise chip-based platforms. These devices can overcome detection limitations of an individual biomarker by detecting multiple markers simultaneously on the same chip, or by featuring integrated and combined target separation techniques. In this review, the major advances in the field of portable and semi-portable micro, nano, and multiplexed platforms for CB detection for the early diagnosis of cancer are highlighted. A comparative discussion is also provided, noting merits and drawbacks of the platforms, especially in terms of portability. Finally, key challenges toward device portability and possible solutions, as well as discussing the future direction of the field are highlighted.

Thermodynamic and Kinetic Modulation of Microfluidic Interfaces by DNA Nanoassembly Mediated Merit-Complementary Heteromultivalency

The multivalent effect is often used to engineer microfluidic affinity interfaces to improve the target separation efficiency. Currently, no design rules exist for thermodynamic and kinetic tuning of properly joining multiple ligands. Herein, we developed a thermodynamic and kinetic modulating strategy of the microfluidic affinity interface via a merit-complementary-heteromultivalent aptamers functionalized DNA nanoassembly. Our strategy is built on the two types of identified aptamers that bind to distinct sites of EpCAM. The aptamer binding of one type is more rapid but less tight, while the other is opposite. By assembling the two types of aptamers together with a tetrahedral DNA framework, we fully exploited these aptamers' merits for tight and rapid recognition of EpCAM, leading to target cell capture with high efficiency and throughput. Our strategy provides a perspective on engineering multivalent recognition molecules through thermodynamic and kinetic tuning.

Recent advances in micro-/nanostructure array integrated microfluidic devices for efficient separation of circulating tumor cells

Circulating tumor cells (CTCs) released from the primary tumor to peripheral blood are promising targets for liquid biopsies. Their biological information is vital for early cancer detection, efficacy assessment, and prognostic monitoring. Despite the tremendous clinical applications of CTCs, development of effective separation techniques are still demanding. Traditional separation methods usually use batch processing for enrichment, which inevitably destroy cell integrity and affect the complete information acquisition. Considering the rarity and heterogeneity of CTCs, it is urgent to develop effective separation methods. Microfluidic chips with precise fluid control at the micron level are promising devices for CTC separation. Their further combination with micro-/nanostructure arrays adds more biomolecule binding sites and exhibit unique fluid barrier effect, which significantly improve the CTC capture efficiency, purity, and sensitivity. This review summarized the recent advances in micro-/nanostructure array integrated microfluidic devices for CTC separation, including microrods, nanowires, and 3D micro-/nanostructures. The mechanisms by which these structures contribute to improved capture efficiency are discussed. Two major categories of separation methods, based on the physical and biological properties of CTCs, are discussed separately. Physical separation includes the design and preparation of micro-/nanostructure arrays, while chemical separation additionally involves the selection and modification of specific capture probes. These emerging technologies are expected to become powerful tools for disease diagnosis in the future.

A universal monoclonal antibody-aptamer conjugation strategy for selective non-invasive bioparticle isolation from blood on a regenerative microfluidic platform

Simultaneous isolation of various circulating tumor cell (CTC) subtypes from whole blood is useful in cancer diagnosis and prognosis. Microfluidic affinity separation devices are promising for CTC separation because of their high throughput capacity and automatability. However, current affinity agents, such as antibodies (mAbs) and aptamers (Apts) alone, are still suboptimal for efficient, consistent, and versatile cell analysis. By introducing a hybrid affinity agent, i.e., an aptamer-antibody (Apt-mAb) conjugate, we developed a universal and regenerative microchip with high efficiency and non-invasiveness in the separation and profiling of various CTCs from blood. The Apt-mAb conjugate consists of a monoclonal antibody that specifically binds the target cell receptor and a surface-bound aptamer that recognizes the conserved Fc region of the mAb. The aptamer then indirectly links the surface functionalization of the microfluidic channels to the mAbs. This hybrid affinity agent and the microchip platform may be widely useful for various bio-particle separations in different biological matrices. Further, the regeneration capability of the microchip improves data consistency between multiple uses and minimizes plastic waste while promoting environmental sustainability. STATEMENT OF SIGNIFICANCE: A hybrid affinity agent, Apt-mAb, consisting of a universal aptamer (Apt) that binds the conserved Fc region of monoclonal antibodies (mAbs) was developed. The invented nano-biomaterial combines the strengths and overcomes the weakness of both Apts and mAbs, thus changing the paradigm of affinity separation of cell subtypes. When Apt-mAb was used to fabricate microfluidic chips using a "universal screwdriver" approach, the microchip could be easily tuned to bind any cell type, exhibiting great universality. Besides high sensitivity and selectivity, the superior regenerative capacity of the microchips makes them reusable, which provides improved consistency and repeatability in cell profiling and opens a new approach towards in vitro diagnostic point-of-care testing devices with environmental sustainability and cost-effectiveness.

Conducting Polymer-Coated Carbon Cloth Captures and Releases Extracellular Vesicles by a Rapid and Controlled Redox Process

Electrochemical techniques offer great opportunities for the capture of chemical and biological entities from complex mixtures and their subsequent release into clean buffers for analysis. Such methods are clean, robust, rapid, and compatible with a wide range of biological fluids. Here, we designed an electrochemically addressable system, based on a conducting terpolymer [P(EDOT-co-EDOTSAc-co-EDOTEG)] coated onto a carbon cloth substrate, to selectively capture and release biological entities using a simple electrochemical redox process. The conducting terpolymer composition was optimized and the terpolymer-coated carbon cloth was extensively characterized using electrochemical analysis, Raman and Fourier transform-infrared spectroscopy, water contact angle analysis, and scanning electron microscopy. The conductive terpolymer possesses a derivative of EDOT with an acetylthiomethyl moiety (EDOTSAc), which is converted into a "free" thiol that then undergoes reversible oxidation/reduction cycles at +1.0 V and -0.8 V (vs Ag/AgCl), respectively. That redox process enables electrochemical capture and on-demand release. We first demonstrated the successful electrochemical capture/release of a fluorescently labeled IgG antibody. The same capture/release procedure was then applied to release extracellular vesicles (EVs), originating from both MCF7 and SKBR3 breast cancer cell line bioreactors. EVs were captured using the substrate-conjugated HER2 antibody which was purified from commercially available trastuzumab. Capture and release of breast cancer EVs using a trastuzumab-derived HER2 antibody has not been reported before (to the best of our knowledge). A rapid (2 min) release at a low potential (-0.8 V) achieved a high release efficiency (>70%) of the captured, HER2+ve, SKBR3 EVs. The developed system and the electrochemical method are efficient and straightforward and have vast potential for the isolation and concentration of various biological targets from large volumes of biological and other (e.g., environmental) samples.

Designer tetrahedral DNA framework-based microfluidic technology for multivalent capture and release of circulating tumor cells

Circulating tumor cells (CTCs) have been recognized as a general biomarker for the early detection, diagnosis and therapy monitoring of cancer. Due to their extreme rarity in peripheral blood, the isolation and analysis of CTCs with high efficiency, high purity and high viability remains a tremendous technological challenge. Herein, we combined tetrahedral DNA framework (TDFs), herringbone channel (HB) chip, together with aptamer-triggered hybridization chain reaction (apt-HCR) to develop an efficient microfluidic system (T-μFS) for capture and release of simulated CTCs. The capture efficiency of MCF-7 ​cells was from 83.3% to 94.2% when the cell numbers ranged from 10 to 10³ using our T-μFS in the whole blood. The release efficiency of the MCF-7 ​cells was 96.2% and the MCF-7 ​cell viability after release was 94.6% using our T-μFS in PBS buffer. Reculture and RT-qPCR studies showed that there was almost no damage by the capture and release treatment for the MCF-7 ​cells viability. These results revealed that our T-μFS could be developed as an integrated and automatic technical platform with great performance for multivalent capture and release of CTCs and have a wide application prospect for tumor liquid biopsy.

•

Three-dimensional amine modified tetrahedral DNA frameworks (TDFs) as rigid scaffolds were anchored on the aldehyde modified substrate of HB-chip, which provided the better spatial orientation compared with single-stranded DNA.

•

Aptamer partially hybridized to an initiator was employed to trigger HCR reaction, and HCR produced modified long products with multi-branched arms for multivalent binding on TDFs to improve the capture efficiency of CTCs.

•

This is the first time that only employed DNA nanostructures in a microfluidic device system to capture CTCs, and all DNA nanostructures could be efficiently removed by enzymes without harming cells.

Nanomaterial-Based Immunocapture Platforms for the Recognition, Isolation, and Detection of Circulating Tumor Cells

Circulating tumor cells (CTCs) are a type of cancer cells that circulate in the peripheral blood after breaking away from solid tumors and are essential for the establishment of distant metastasis. Up to 90% of cancer-related deaths are caused by metastatic cancer. As a new type of liquid biopsy, detecting and analyzing CTCs will provide insightful information for cancer diagnosis, especially the in-time disease status, which would avoid some flaws and limitations of invasive tissue biopsy. However, due to the extremely low levels of CTCs among a large number of hematologic cells, choosing immunocapture platforms for CTC detection and isolation will achieve good performance with high purity, selectivity, and viability. These properties are directly associated with precise downstream analysis of CTC profiling. Recently, inspired by the nanoscale interactions of cells in the tissue microenvironment, platforms based on nanomaterials have been widely explored to efficiently enrich and sensitively detect CTCs. In this review, various immunocapture platforms based on different nanomaterials for efficient isolation and sensitive detection of CTCs are outlined and discussed. First, the design principles of immunoaffinity nanomaterials are introduced in detail. Second, the immunocapture and release of platforms based on nanomaterials ranging from nanoparticles, nanostructured substrates, and immunoaffinity microfluidic chips are summarized. Third, recent advances in single-cell release and analysis of CTCs are introduced. Finally, some perspectives and challenges are provided in future trends of CTC studies.

Photocontrollable thermosensitive chemical spatiotemporally destabilizes mitochondrial membranes for cell fate manipulation

Perturbations in mitochondrial membrane stability lead to cytochrome c release and induce caspase-dependent apoptosis. Using synthetic smart chemicals that with changeable physicochemical properties to interfere the mitochondrial membrane stability has...

A review of enrichment methods for circulating tumor cells: from single modality to hybrid modality

Circulating tumor cell (CTC) analysis as a liquid biopsy can be used for early diagnosis of cancer, evaluating cancer progression, and assessing treatment efficacy. The enrichment of CTCs from patient blood is important for CTC analysis due to the extreme rarity of CTCs. This paper updates recent advances in CTC enrichment methods. We first review single-modality methods, including biophysical and biochemical methods. Hybrid-modality methods, combining at least two single-modality methods, are gaining increasing popularity for their improved performance. Then this paper reviews hybrid-modality methods, which are categorized into integrated and sequenced hybrid-modality methods. The state of the art indicates that the CTC capture efficiencies of integrated hybrid-modality methods can reach 85% or higher by taking advantage of the superimposed and enhanced capture effects from multiple single-modality methods. Moreover, a hybrid method integrating biophysical with biochemical methods is characterized by both high processing rate and high specificity.

Smart Bionic Surfaces with Switchable Wettability and Applications

In order to satisfy the needs of different applications and more complex intelligent devices, smart control of surface wettability will be necessary and desirable, which gradually become a hot spot and focus in the field of interface wetting. Herein, we review interfacial wetting states related to switchable wettability on superwettable materials, including several classical wetting models and liquid adhesive behaviors based on the surface of natural creatures with special wettability. This review mainly focuses on the recent developments of the smart surfaces with switchable wettability and the corresponding regulatory mechanisms under external stimuli, which is mainly governed by the transformation of surface chemical composition and geometrical structures. Among that, various external stimuli such as physical stimulation (temperature, light, electric, magnetic, mechanical stress), chemical stimulation (pH, ion, solvent) and dual or multi-triggered stimulation have been sought out to realize the regulation of surface wettability. Moreover, we also summarize the applications of smart surfaces in different fields, such as oil/water separation, programmable transportation, anti-biofouling, detection and delivery, smart soft robotic etc. Furthermore, current limitations and future perspective in the development of smart wetting surfaces are also given. This review aims to offer deep insights into the recent developments and responsive mechanisms in smart biomimetic surfaces with switchable wettability under external various stimuli, so as to provide a guidance for the design of smart surfaces and expand the scope of both fundamental research and practical applications.

An electroactive and thermo-responsive material for the capture and release of cells

Non-invasive collection of target cells is crucial for research in biology and medicine. In this work, we combine a thermo-responsive material, poly(N-isopropylacrylamide), with an electroactive material, poly(3,4-ethylene-dioxythiopene):poly(styrene sulfonate), to generate a smart and conductive copolymer for the label-free and non-invasive detection of the capture and release of cells on gold electrodes by electrochemical impedance spectroscopy. The copolymer is functionalized with fibronectin to capture tumor cells, and undergoes a conformational change in response to temperature, causing the release of cells. Simultaneously, the copolymer acts as a sensor, monitoring the capture and release of cancer cells by electrochemical impedance spectroscopy. This platform has the potential to play a role in top-notch label-free electrical monitoring of human cells in clinical settings.

Microfluidics-Based Sensing of Biospecies

Over the past decades, microfluidic devices based on many advanced techniques have aroused widespread attention in the fields of chemical, biological, and analytical applications. Integration of microdevices with a variety of chip designs will facilitate promising functionality. Notably, the combination of microfluidics with functional nanomaterials may provide creative ideas to achieve rapid and sensitive detection of various biospecies. In this review, focused on the microfluids and microdevices in terms of their fabrication, integration, and functions, we summarize the up-to-date developments in microfluidics-based analysis of biospecies, where biomarkers, small molecules, cells, and pathogens as representative biospecies have been explored in-depth. The promising applications of microfluidic biosensors including clinical diagnosis, food safety control, and environmental monitoring are also discussed. This review aims to highlight the importance of microfluidics-based biosensors in achieving high throughput, highly sensitive, and low-cost analysis and to promote microfluidics toward a wider range of applications.

A Review of Circulating Tumour Cell Enrichment Technologies

Simple Summary

Circulating tumour cells (CTCs) are cancer cells shed into the bloodstream from tumours and their analysis can provide important insights into cancer detection and monitoring, with the potential to direct personalised therapies for the patient. These CTCs are rare in the blood, which makes their detection and enrichment challenging and to date, only one technology (the CellSearch) has gained FDA approval for determining the prognosis of patients with advanced breast, prostate and colorectal cancers. Here, we review the wide range of enrichment technologies available to isolate CTCs from other blood components and highlight the important characteristics that new technologies should possess for routine clinical use.

Abstract

Circulating tumour cells (CTCs) are the precursor cells for the formation of metastatic disease. With a simple blood draw, liquid biopsies enable the non-invasive sampling of CTCs from the blood, which have the potential to provide important insights into cancer detection and monitoring. Since gaining FDA approval in 2004, the CellSearch system has been used to determine the prognosis of patients with metastatic breast, prostate and colorectal cancers. This utilises the cell surface marker Epithelial Cell Adhesion Molecule (EpCAM), to enrich CTCs, and many other technologies have adopted this approach. More recently, the role of mesenchymal-like CTCs in metastasis formation has come to light. It has been suggested that these cells are more aggressive metastatic precursors than their epithelial counterparts; however, mesenchymal CTCs remain undetected by EpCAM-based enrichment methods. This has prompted the development of a variety of ‘label free’ enrichment technologies, which exploit the unique physical properties of CTCs (such as size and deformability) compared to other blood components. Here, we review a wide range of both immunocapture and label free CTC enrichment technologies, summarising the most significant advantages and disadvantages of each. We also highlight the important characteristics that technologies should possess for routine clinical use, since future developments could have important clinical implications, with the potential to direct personalised therapies for patients with cancer.

Chemo-specific designs for the enumeration of circulating tumor cells: advances in liquid biopsy

Advanced materials and chemo-specific designs at the nano/micrometer-scale have ensured revolutionary progress in next-generation clinically relevant technologies. For example, isolating a rare population of cells, like circulating tumor cells (CTCs) from the blood amongst billions of other blood cells, is one of the most complex scientific challenges in cancer diagnostics. The chemical tunability for achieving this degree of exceptional specificity for extra-cellular biomarker interactions demands the utility of advanced entities and multistep reactions both in solution and in the insoluble state. Thus, this review delineates the chemo-specific substrates, chemical methods, and structure-activity relationships (SARs) of chemical platforms used for isolation and enumeration of CTCs in advancing the relevance of liquid biopsy in cancer diagnostics and disease management. We highlight the synthesis of cell-specific, tumor biomarker-based, chemo-specific substrates utilizing functionalized linkers through chemistry-based conjugation strategies. The capacity of these nano/micro substrates to enhance the cell interaction specificity and efficiency with the targeted tumor cells is detailed. Furthermore, this review accounts for the importance of CTC capture and other downstream processes involving genotypic and phenotypic CTC analysis in real-time for the detection of the early onset of metastases progression and chemotherapy treatment response, and for monitoring progression free-survival (PFS), disease-free survival (DFS), and eventually overall survival (OS) in cancer patients.

Selective capture and non-invasive release of cells using a thermoresponsive polymer brush with affinity peptides

Thermoresponsive block copolymer brush with cell affinity peptides was prepared via two steps of ATRP and subsequent click reaction. The prepared polymer brush can purify cells with high selectivity by simply changing temperature.

Electrospun degradable Zn-Mn oxide hierarchical nanofibers for specific capture and efficient release of circulating tumor cells

Constructing biological affinity devices is considered as an effective strategy for isolating circulating tumor cells (CTCs), and electrospun nanofibers (ESNFs) have recently received attention. However, the current research focuses on polymer fibers, and fabricating stimuli-responsive inorganic nanofibers for cancer diagnosis and analysis is still challenging. In this work, Zn-Mn oxide nanofibers (ZnMnNFs) are used to capture and purify cancer cells after modification with specific antibodies. Then, the hierarchical nanofibers are degraded by reductive weak acid to release the captured cells efficiently without residues. Fusion of Zn and Mn, two transition metals, enhances the surface activity of oxides so that ZnMnNFs are easier to be degraded and modified. By using MCF-7 cancer cells, the cell capture efficiency of ZnMnNFs is up to 88.2%. Furthermore, by using citric acid, it is discovered that, by comparison with Mn oxide nanofibers, the cell release efficiency of ZnMnNFs is improved to 95.1% from 15.4%. In addition, the viability of released cells exceeds 90%. Lastly, the robustness of ZnMnNFs substrates is tested in peripheral blood from breast cancer patients (BCP) and colorectal cancer patients (CCP). Combined with fluorescence labeling, CTCs are confirmed to be isolated from all the clinical samples. This is the first trial of using ternary inorganic ESNFs for cancer cell capture. It is anticipated that the degradable ESNFs will provide biocompatible theranostic platforms and overcome the current limitations of cell release for high-precision gene analysis.

Photoacoustic detection of circulating melanoma cells in late stage patients

Melanoma is the deadliest skin cancer and is responsible for over 7000 deaths in the US annually. The spread of cancer, or metastasis, is responsible for these deaths, as secondary tumors interrupt normal organ function. Circulating tumor cells, or those cells that spread throughout the body from the primary tumor, are thought to be responsible for metastasis. We developed an optical method, photoacoustic flow cytometry, in order to detect and enumerate circulating melanoma cells (CMCs) from blood samples of patients. We tested the blood of Stage IV melanoma patients to show the ability of the photoacoustic flow cytometer to detect these rare cells in blood. We then tested the system on archived blood samples from Stage III melanoma patients with known outcomes to determine if detection of CMCs can predict future metastasis. We detected between 0 and 66 CMCs in Stage IV patients. For the Stage III study, we found that of those samples with CMCs, 2 remained disease free and 5 developed metastasis. Of those without CMCs, 6 remained disease free and 1 developed metastasis. We believe that photoacoustic detection of CMCs provides valuable information for the prediction of metastasis and we postulate a system for more accurate prognosis.

Natural Fish Trap-Like Nanocage for Label-Free Capture of Circulating Tumor Cells

Nanomaterials have achieved several breakthroughs in the capture of circulating tumor cells (CTCs) over the past decades. However, artificial fabrication of label-free nanomaterials used for high-efficiency CTC capture is still a challenge. Through billions of years of evolution and natural selection, various complicated and precise hierarchical structures are developed. Here, a novel fish trap-like "nanocage" structure derived from the natural Chrysanthemum pollen is reported and a nanocage-featured film for the label-free capture of CTCs and CTC clusters is constructed. The nanocage-featured film effectively captures 92% rare cancer cells with a broad spectrum of cancer types, due to the synergistic effect of nanocage-CTC filopodia matching, high contact area, and strong adhesion force between the cancer cells and the nanocage. Furthermore, the nanocage-featured film successfully detects CTCs and CTC clusters in 2 or 4 mL blood taken from 21 cancer patients (stages I-IV) suffering from various types of cancers. This novel, abundant, and economical fish trap-like "nanocage" may provide new perspectives for the application of natural nanomaterials in clinical CTC capture and analysis.

Silicon Nanowires and their Impact on Cancer Detection and Monitoring

Since the inception of silicon nanowires (SINWs)-based biosensors in 2001, SINWs employed in various detection schemes have routinely demonstrated label-free, real-time, sub femtomolar detection of both protein and nucleic acid analytes. This has allowed SiNW-based biosensors to integrate into the field of cancer detection and cancer monitoring and thus have the potential to be a paradigm shift in how cancer biomarkers are detected and monitored. Combining this with several promising fields such as liquid biopsies and targeted oncology, SiNW based biosensors represents an opportunity for cancer monitoring and treatment to be a more dynamic process. Such advances provide clinicians with more information on the molecular landscape of cancer patients which can better inform cancer treatment guidelines.

Reversible Structure Engineering of Bioinspired Anisotropic Surface for Droplet Recognition and Transportation

Surfaces with tunable liquid adhesion have aroused great attention in past years. However, it remains challenging to endow a surface with the capability of droplet recognition and transportation. Here, a bioinspired surface, termed as TMAS, is presented that is inspired by isotropic lotus leaves and anisotropic butterfly wings. The surface is prepared by simply growing a triangular micropillar array on the pre-stretched thin poly(dimethylsiloxane) (PDMS) film. The regulation of mechanical stress in the PDMS film allows the fine tuning of structural parameters of the micropillar array reversibly, which results in the instantaneous, in situ switching between isotropic and various degrees of anisotropic droplet adhesions, and between strong adhesion and directional sliding of water droplets. TMAS can thus be used for robust droplet transportation and recognition of acids, bases, and their pH strengths. The results here could inspire the design of robust sensor techniques.

Study on polyethylene glycol cross-linker in peptide-conjugated antibody on efficiency of cell capture and release

Cell separation is important in cell therapy and disease diagnosis. Therefore, various cell separation methods have been studied, but cellular damage and the need for pretreatment remain substantial problems. Recently, in the diagnostic field, the detachment and recovery of antibody-captured cells was actively studied to obtain more detailed information on cancer cells. Previously, we have developed a highly efficient cell separation method using microfibers. In the present study, the efficiency of cell capture and release was examined by controlling the molecular mobility of an immobilized antibody to efficiently detect cells with low expression of a marker molecule. We found that improvement in molecular mobility of antibodies enhances cell capture efficiency but decreases the detachment effectiveness of the captured cells. Therefore, the molecular mobility of antibodies can be utilized to control cell capture and release according to the level of expression of the marker molecule.

A Multifunctional Platform for the Capture, Release, And Enumeration of Circulating Tumor Cells Based on Aptamer Binding, Nicking Endonuclease-Assisted Amplification, And Inductively Coupled Plasma Mass Spectrometry Detection

Inductively coupled plasma mass spectrometry (ICP-MS) combined with element tags has been well designed and extensively applied in cell enumeration. It possesses superior quantitative capability, strong resistance to matrix interference, multiplex detection capability but destructive characteristic. Herein, we constructed an ICP-MS based multifunctional platform for capture, nondestructive enumeration, and release of circulating tumor cells (CTCs). Aptamer on capture probe recognized Mucin 1 (MUC1) on membrane of MCF-7 cells specifically, thus the cells were captured by probe and the Initiator originally hybridized with Aptamer was substituted by MUC1 and released into solution. Then the released Initiator was separated from the captured cells and hybridized with Tb labeled Substrate on detection probe to release a large amount of nicked Tb fragments through the nicking endonuclease assisted amplification for subsequent ICP-MS detection. Meanwhile, cells captured by probe were released by nuclease digestion for further reculture. Such a strategy effectively avoids CTCs destruction resulted from ICP-MS enumeration, increases the detection sensitivity of ICP-MS by involving nicking endonuclease assisted amplification, and realizes cell recovery for further analysis. A limit of detection of 87 MCF-7 cells and a linear range of 250-10 000 MCF-7 cells were realized for ICP-MS enumeration. A cell recovery of 52.7% (with capture and release efficiency of 63.9 and 82.5%, respectively) and a viability of 74.3% were obtained, meanwhile the released cells exhibited strong proliferation ability. This multifunctional platform for CTCs capture, enumeration, and release has great applicable potential in early diagnosis and individual treatment for cancer.

Encapsulation and release of living tumor cells using hydrogels with the hybridization chain reaction

Circulating tumor cells (CTCs) enable noninvasive liquid biopsy and identification of cancer. Various approaches exist for the capture and release of CTCs, including microfluidic methods and those involving magnetic beads or nanostructured solid interfaces. However, the concomitant cell damage and fragmentation that often occur during capture make it difficult to extensively characterize and analyze living CTCs. Here, we describe an aptamer-trigger-clamped hybridization chain reaction (atcHCR) method for the capture of CTCs by porous 3D DNA hydrogels. The 3D environment of the DNA networks minimizes cell damage, and the CTCs can subsequently be released for live-cell analysis. In this protocol, initiator DNAs with aptamer-toehold biblocks specifically bind to the epithelial cell adhesion molecule (EpCAM) on the surface of CTCs, which triggers the atcHCR and the formation of a DNA hydrogel. The DNA hydrogel cloaks the CTCs, facilitating quantification with minimal cell damage. This method can be used to quantitively identify as few as 10 MCF-7 cells in a 2-µL blood sample. Decloaking of tumor cells via gentle chemical stimulus (ATP) is used to release living tumor cells for subsequent cell culture and live-cell analysis. We also describe how to use the protocol to encapsulate and release cells of cancer cell lines, which can be used in preliminary experiments to model CTCs. The whole protocol takes ~2.5 d to complete, including downstream cell culture and analysis.

On the Interaction between 1D Materials and Living Cells

One-dimensional (1D) materials allow for cutting-edge applications in biology, such as single-cell bioelectronics investigations, stimulation of the cellular membrane or the cytosol, cellular capture, tissue regeneration, antibacterial action, traction force investigation, and cellular lysis among others. The extraordinary development of this research field in the last ten years has been promoted by the possibility to engineer new classes of biointerfaces that integrate 1D materials as tools to trigger reconfigurable stimuli/probes at the sub-cellular resolution, mimicking the in vivo protein fibres organization of the extracellular matrix. After a brief overview of the theoretical models relevant for a quantitative description of the 1D material/cell interface, this work offers an unprecedented review of 1D nano- and microscale materials (inorganic, organic, biomolecular) explored so far in this vibrant research field, highlighting their emerging biological applications. The correlation between each 1D material chemistry and the resulting biological response is investigated, allowing to emphasize the advantages and the issues that each class presents. Finally, current challenges and future perspectives are discussed.

Magnetically driven microfluidics for isolation of circulating tumor cells

Circulating tumor cells (CTCs) largely contribute to cancer metastasis and show potential prognostic significance in cancer isolation and detection. Miniaturization has progressed significantly in the last decade which in turn enabled the development of several microfluidic systems. The microfluidic systems offer a controlled microenvironment for studies of fundamental cell biology, resulting in the rapid development of microfluidic isolation of CTCs. Due to the inherent ability of magnets to provide forces at a distance, the technology of CTCs isolation based on the magnetophoresis mechanism has become a routine methodology. This historical review aims to introduce two principles of magnetic isolation and recent techniques, facilitating research in this field and providing alternatives for researchers in their study of magnetic isolation. Researchers intend to promote effective CTC isolation and analysis as well as active development of next-generation cancer treatment. The first part of this review summarizes the primary principles based on positive and negative magnetophoretic isolation and describes the metrics for isolation performance. The second part presents a detailed overview of the factors that affect the performance of CTC magnetic isolation, including the magnetic field sources, functionalized magnetic nanoparticles, magnetic fluids, and magnetically driven microfluidic systems.

A Review on Microdevices for Isolating Circulating Tumor Cells

Cancer metastasis is the primary cause of high mortality of cancer patients. Enumeration of circulating tumor cells (CTCs) in the bloodstream is a very important indicator to estimate the therapeutic outcome in various metastatic cancers. The aim of this article is to review recent developments on the CTC isolation technologies in microdevices. Based on the categories of biochemical and biophysical isolation approaches, a literature review and in-depth discussion will be included to provide an overview of this challenging topic. The current excellent developments suggest promising CTC isolation methods in order to establish a precise indicator of the therapeutic outcome of cancer patients.

Internalization and Viability Studies of Suspended Nanowire Silicon Chips in HeLa Cells

Micrometer-sized silicon chips have been demonstrated to be cell-internalizable, offering the possibility of introducing in cells even smaller nanoelements for intracellular applications. On the other hand, silicon nanowires on extracellular devices have been widely studied as biosensors or drug delivery systems. Here, we propose the integration of silicon nanowires on cell-internalizable chips in order to combine the functional features of both approaches for advanced intracellular applications. As an initial fundamental study, the cellular uptake in HeLa cells of silicon 3 µm × 3 µm nanowire-based chips with two different morphologies was investigated, and the results were compared with those of non-nanostructured silicon chips. Chip internalization without affecting cell viability was achieved in all cases; however, important cell behavior differences were observed. In particular, the first stage of cell internalization was favored by silicon nanowire interfaces with respect to bulk silicon. In addition, chips were found inside membrane vesicles, and some nanowires seemed to penetrate the cytosol, which opens the door to the development of silicon nanowire chips as future intracellular sensors and drug delivery systems.

Facile synthesis of 3D hierarchical micro-/nanostructures in capillaries for efficient capture of circulating tumor cells

The efficient capture of rare circulating tumor cells (CTCs) with high viability is of great importance in cancer diagnosis. The integration of three-dimensional (3D) nanobiointerfaces with capillary flow channel platforms can efficiently improve CTC capture performance by providing abundant binding sites and increasing the likelihood of contact as samples flow through the microchannels. However, due to the complex preparation processes, facile synthesis of nanostructures for use as substrates in flow channels for biomedical applications is still challenging. To reduce the encapsulation steps in the fabricating of nanostructured flow channel devices, we chose the enclosed glass capillaries as flow channels and accomplished all the experiments in the microchannels, including 3D nanostructure synthesis, surface modification and capture/release of CTCs. In this work, we constructed a novel 3D Zn(OH)F/ZnO nanoforest array in capillaries for CTC isolation via a facile microfluidic wet chemistry method. Because of the abundant binding sites of the 3D Zn(OH)F/ZnO nanoforest array, the capture efficiency was remarkably enhanced compared with that of vertical nanowires (90.3% vs 69.1%). In addition, a high release efficiency and cell viability of released cells were achieved by grafting poly(N-isopropylacrylamide) (PNIPPAm). These results may provide evidence for a novel method to fabricate hierarchical 3D substrates with a combination of biomolecule recognition and topographical interaction for biomedical applications.

Fabrication of aptamer modified TiO2 nanofibers for specific capture of circulating tumor cells

Herein, we developed an inexpensive titanium dioxide (TiO₂) nanofiber substrate for efficient and selective capture of circulating tumor cells (CTCs) from mimic patients' samples. The TiO₂ nanofiber substrates were fabricated by electrospinning in combination with the calcination process. The surface of nanofiber substrates was modified with the anti-adhesion molecule, bovine serum albumin (BSA) and the nucleolin aptamer AS1411, wherein, aptamer AS1411 specifically binds to the nucleolin protein overexpressed on the membrane surface of cancer cells. The formed TiO₂ nanofiber substrates exhibited high efficacy and specificity to capture nucleolin positive cells through synergistic topographic interactions. Using the rare number of cell capture experiments, the capture efficiency of up to 75 % was achieved on the surface of the nanofiber substrate for rare number target cells spiked in the white blood cells (WBCs) from 1 mL whole blood samples. In conclusion, this study highlighted the potential of the TiO₂-BSA-biotin-AS1411 nanofiber substrate as a highly efficient platform to realize the selective and specific capture of rare CTCs in the clinical settings.

Recent Advances in Microfluidic Platforms Applied in Cancer Metastasis: Circulating Tumor Cells' (CTCs) Isolation and Tumor-On-A-Chip

Cancer remains the leading cause of death worldwide despite the enormous efforts that are made in the development of cancer biology and anticancer therapeutic treatment. Furthermore, recent studies in oncology have focused on the complex cancer metastatic process as metastatic disease contributes to more than 90% of tumor-related death. In the metastatic process, isolation and analysis of circulating tumor cells (CTCs) play a vital role in diagnosis and prognosis of cancer patients at an early stage. To obtain relevant information on cancer metastasis and progression from CTCs, reliable approaches are required for CTC detection and isolation. Additionally, experimental platforms mimicking the tumor microenvironment in vitro give a better understanding of the metastatic microenvironment and antimetastatic drugs' screening. With the advancement of microfabrication and rapid prototyping, microfluidic techniques are now increasingly being exploited to study cancer metastasis as they allow precise control of fluids in small volume and rapid sample processing at relatively low cost and with high sensitivity. Recent advancements in microfluidic platforms utilized in various methods for CTCs' isolation and tumor models recapitulating the metastatic microenvironment (tumor-on-a-chip) are comprehensively reviewed. Future perspectives on microfluidics for cancer metastasis are proposed.

Dynamically Monitoring the Clonal Evolution of Lung Cancer Based on the Molecular Characterization of Circulating Tumor Cells Using Aptamer Cocktail-Modified Nanosubstrates

Dynamically monitoring the clonal evolution of lung cancer and performing molecular analyses on tumor cells are challenging but necessary tasks to adjust therapeutic interventions and evaluate treatment efficacy. Circulating tumor cells (CTCs), as a "liquid biopsy", may offer an auxiliary tool to identify phenotypic transformation of solid tumors at primary or metastatic sites and uncover their corresponding molecular variation. Herein, we developed an aptamer-modified PEG-PLGA-nanofiber (PPN) microfluidic system optimized for recognizing rare CTC subtypes in lung cancer patients. This unique purification system can be adopted to monitor the clonal evolution of solid tumors by following the intrinsic immunophenotypes of CTCs, while significantly enhancing capture efficiency for polyclonal-derived tumor cells, further facilitating therapeutic evaluation via dynamic CTC enumeration. Combining with downstream single-cell sequencing, the aptamer-modified-PPN microfluidic system was able to provide early insight into tumor heterogeneity and predict histologic transformation in advance, broadening its clinical applications in lung cancer patients.

Nanostructured Substrates for Detection and Characterization of Circulating Rare Cells: From Materials Research to Clinical Applications

Circulating rare cells in the blood are of great significance for both materials research and clinical applications. For example, circulating tumor cells (CTCs) have been demonstrated as useful biomarkers for "liquid biopsy" of the tumor. Circulating fetal nucleated cells (CFNCs) have shown potential in noninvasive prenatal diagnostics. However, it is technically challenging to detect and isolate circulating rare cells due to their extremely low abundance compared to hematologic cells. Nanostructured substrates offer a unique solution to address these challenges by providing local topographic interactions to strengthen cell adhesion and large surface areas for grafting capture agents, resulting in improved cell capture efficiency, purity, sensitivity, and reproducibility. In addition, rare-cell retrieval strategies, including stimulus-responsiveness and additive reagent-triggered release on different nanostructured substrates, allow for on-demand retrieval of the captured CTCs/CFNCs with high cell viability and molecular integrity. Several nanostructured substrate-enabled CTC/CFNC assays are observed maturing from enumeration and subclassification to molecular analyses. These can one day become powerful tools in disease diagnosis, prognostic prediction, and dynamic monitoring of therapeutic response-paving the way for personalized medical care.

Recent progress in the design and synthesis of nanofibers with diverse synthetic methodologies: characterization and potential applications

The advancements of nanotechnology, particularly nanomaterials science, have produced a broad range of nanomaterials including nanofibers, nanorods, nanowires and etc., which have been technically and practically examined over various applications.

Graphene Oxide-Based Biosensors for Liquid Biopsies in Cancer Diagnosis

Liquid biopsies use blood or urine as test samples, which are able to be continuously collected in a non-invasive manner. The analysis of cancer-related biomarkers such as circulating tumor cells (CTCs), circulating tumor DNA (ctDNA), microRNA, and exosomes provides important information in early cancer diagnosis, tumor metastasis detection, and postoperative recurrence monitoring assist with clinical diagnosis. However, low concentrations of some tumor markers, such as CTCs, ctDNA, and microRNA, in the blood limit its applications in clinical detection and analysis. Nanomaterials based on graphene oxide have good physicochemical properties and are now widely used in biomedical detection technologies. These materials have properties including good hydrophilicity, mechanical flexibility, electrical conductivity, biocompatibility, and optical performance. Moreover, utilizing graphene oxide as a biosensor interface has effectively improved the sensitivity and specificity of biosensors for cancer detection. In this review, we discuss various cancer detection technologies regarding graphene oxide and discuss the prospects and challenges of this technology.