Hollow Nanostructures for Photocatalysis: Advantages and Challenges

Encapsulating stable perovskite catalysts in hollow nanoreactors for enhanced pollutants degradation

Creating a microenvironment for enhanced peroxymonosulfate (PMS) activation is vital in advanced oxidation processes. The objective of this study was to fabricate nanoshells composed of titanium dioxide embedded with cobalt titanate nanoparticles of perovskite to act as nanoreactors for effectively initiating PMS and degrading contaminants. The unique porous structure and confined space of the nanoreactor facilitated reactant absorption and mass transfer to the active sites, resulting in exceptional catalytic performance for pollutant elimination. Experimental findings revealed close to 100% decomposition efficiency of 4-chlorophenol (4-CP) within an hour utilizing the nanoreactors over a wide pH range. The TiO2/CoTiO3 hollow nanoshells catalysts also displayed adaptability in disintegrating organic dyes and antibiotics. The radicals SO4•-, •OH, and non-radicals 1O2 were determined to be accountable for eliminating pollutants, as supported by trapping experiments and electron paramagnetic resonance spectra. The catalyst was confirmed as an electron donor and PMS as an electron acceptor through electrochemical tests and density functional theory calculations. This study underscores the potential of incorporating stable perovskite catalysts in hollow nanoreactors to enhance wastewater treatment.

Unveiling the Role of Water in Heterogeneous Photocatalysis of Methanol Conversion for Efficient Hydrogen Production

Water molecules, which act as both solvent and reactant, play critical roles in photocatalytic reactions for methanol conversion. However, the influence of water on the adsorption of methanol and desorption of liquid products, which are two essential steps that control the performance in photocatalysis, has been well under-explored. Herein, we reveal the role of water in heterogeneous photocatalytic processes of methanol conversion on the platinized carbon nitride (Pt/C3N4) model photocatalyst. In situ spectroscopy techniques, isotope effects, and computational calculations demonstrate that water shows adverse effects on the adsorption of methanol molecules and desorption processes of methanol oxidation products on the surface of Pt/C3N4, significantly altering the reaction pathways in photocatalytic methanol conversion process. Guided by these discoveries, a photothermal-assisted photocatalytic system is designed to achieve a high solar-to-hydrogen (STH) conversion efficiency of 2.3 %, which is among the highest values reported. This work highlights the important roles of solvents in controlling the adsorption/desorption behaviours of liquid-phase heterogeneous catalysis.

Nitrogen-oxygen co-doped carbon@silica hollow spheres as encapsulated Pd nanoreactors for acetylene dialkoxycarbonylation

The introduction of heteroatoms into hollow carbon spheres is imperative for enhancing catalytic activity. Consequently, we investigated the utilization of nitrogen-oxygen(N/O) co-doped hollow carbon (C)/silica (SiO2) nanospheres (NxC@mSiO2), which have a large internal volume and a nano-constrained environment that limits metal aggregation and loss, making them a potential candidate. In this study, we demonstrate the synthesis of nitrogen-oxygen (N/O) co-doped hollow carbon spheres using resorcinol and formaldehyde as carbon precursors, covered with silica, and encapsulated with palladium nanoparticles (NPs) in situ. The N/O co-doping process introduced defects on the surface of the internal C structure, which acted as active sites and facilitated substrate adsorption. Subsequent treatment with hydrogen peroxide (H2O2) introduced numerous carboxyl groups onto the C structure, increasing the catalytic environment as acid auxiliaries. The carboxyl group is present in the carbon structure, as determined calculations based on by density functional theory, reduces the adsorption energy of acetylene, thereby promoting its adsorption and enrichment. Furthermore, H2O2-treatment enhanced the oxygen defects in the carbon structure, improving the dispersion of Pd NPs and defect structure. The Pd/NxC@mSiO2-H2O2 catalysts demonstrated outstanding performance in the acetylene dialkoxycarbonylation reaction, showcasing high selectivity towards 1,4-dicarboxylate (>93 %) and remarkable acetylene conversion (>92 %). Notably, the catalyst exhibited exceptional selectivity and durability throughout the reaction.

Ultrasmall Inorganic Mesoporous Nanoparticles: Preparation, Functionalization, and Application

Ultrasmall mesoporous nanoparticles (<50 nm), a unique porous nanomaterial, have been widely studied in many fields in the last decade owing to the abundant advantages, involving rich mesopores, low density, high surface area, numerous reaction sites, large cavity space, ultrasmall size, etc. This paper presents a review of recent advances in the preparation, functionalization, and applications of ultrasmall inorganic mesoporous nanoparticles for the first time. The soft monomicelles-directed method, in contrast to the hard-template and template-free methods, is more flexible in the synthesis of mesoporous nanoparticles. This is because the amphiphilic micelle has tunable functional blocks, controlled molecule masses, configurations and mesostructures. Focus on the soft micelle directing method, monomicelles could be classified into four types, i.e., the Pluronic-type block copolymer monomicelles, laboratory-synthesized amphiphilic block copolymers monomicelles, the single-molecule star-shaped block copolymer monomicelles, and the small-molecule anionic/cationic surfactant monomicelles. This paper also reviews the functionalization of the inner mesopores and the outer surfaces, which includes constructing the yolkshell structures (encapsulated nanoparticles), anchoring the active components packed on the shell and building an asymmetric Janus architecture. Then, several representative applications, involving catalysis, energy storage, and biomedicines are presented. Finally, the prospects and challenges of controlled synthesis and large-scale applications of ultrasmall mesoporous nanoparticles in the future are foreseen.

Synthetic Chemistry in Flow: From Photolysis & Homogeneous Photocatalysis to Heterogeneous Photocatalysis

Photocatalytic synthesis of value-added chemicals has gained increasing attention in recent years owing to its versatility in driving many important reactions under ambient conditions. Selective hydrogenation, oxidation, coupling, and halogenation with a high conversion of the reactants have been realized using designed photocatalysts in batch reactors with small volumes at a laboratory scale; however, scaling-up remains a critical challenge due to inefficient utilization of incident light and active sites of the photocatalysts, resulting in poor catalytic performance that hinders its practical applications. Flow systems are considered one of the solutions for practical applications of light-driven reactions and have experienced great success in photolytic and homogeneous photocatalysis, yet their applications in heterogeneous photocatalysis are still under development. In this perspective, we have summarized recent progress in photolytic and photocatalytic synthetic chemistry performed in flow systems from the view of reactor design with a special focus on heterogeneous photocatalysis. The advantages and limitations of different flow systems, as well as some practical considerations of design strategies are discussed.

Hollow structured CdS@ZnIn2S4 Z-scheme heterojunction for bifunctional photocatalytic hydrogen evolution and selective benzylamine oxidation

Photocatalytic hydrogen evolution (PHE) is frequently constrained by inadequate light utilization and the rapid combination rate of the photogenerated electron-hole pairs. Additionally, conventional PHE processes are often facilitated by the addition of sacrificial reagents to consume photo-induced holes, which makes this approach economically unfavorable. Herein, we designed a spatially separated bifunctional cocatalyst decorated Z-scheme heterojunction of hollow structured CdS (HCdS) @ZnIn2S4 (ZIS), which was prepared by a sacrificial hard template method followed by photo-deposition. Consequently, PdOx@HCdS@ZIS@Pt exhibited efficient PHE (86.38 mmol·g-1·h-1) and benzylamine (BA) oxidation coupling (164.75 mmol·g-1·h-1) with high selectivity (97.34 %). The unique hollow core-shelled morphology and bifunctional cocatalyst loading in this work hold great potential for the design and synthesis of bifunctional Z-scheme photocatalysts.

One-Step Electrochemical Synthesis of Multiyolk-Shell Nanocoils for Exceptional Photocatalytic Performance

Multiyolk-shell (mYS) nanostructures have garnered significant interest in various photocatalysis applications such as water splitting and waste treatment. Nonetheless, the complexity and rigorous conditions for the synthesis have hindered their widespread implementation. This study presents a one-step electrochemical strategy for synthesizing multiyolk-shell nanocoils (mYSNC), wherein multiple cores of noble metal nanoparticles, such as Au, are embedded within the hollow coil-shaped FePO4 shell structures, mitigating the challenges posed by conventional methods. By capitalizing on the dissimilar dissolution rates of bimetallic alloy nanocoils in an electrochemically programmed solution, nanocoils of different shapes and materials, including two variations of mYSNCs are successfully fabricated. The resulting Au-FePO4 mYSNCs exhibit exceptional photocatalytic performance for environmental remediation, demonstrating up to 99% degradation of methylene blue molecules within 50 min and 95% degradation of tetracycline within 100 min under ultraviolet-visible (UV-vis) light source. This remarkable performance can be attributed to the abundant electrochemical active sites, internal voids facilitating efficient light harvesting with coil morphology, amplified localized surface plasmon resonance (LSPR) at the plasmonic nanoparticle-semiconductor interface, and effective band engineering. The innovative approach utilizing bimetallic alloys demonstrates precise geometric control and design of intricate multicomponent hybrid composites, showcasing the potential for developing versatile hollow nanomaterials for catalytic applications.

Nanosized tubular clay minerals as inorganic nanoreactors for energy and environmental applications: A review to fill current knowledge gaps

Modern society pays further and further attention to environmental protection and the promotion of sustainable energy solutions. Heterogeneous photocatalysis is widely recognized as one of the most economically viable and ecologically sound technologies to combat environmental pollution and the global energy crisis. One challenge is finding a suitable photocatalytic material for an efficient process. Inorganic nanotubes have garnered attention as potential candidates due to their optoelectronic properties, which differ from their bulk equivalents. Among them, clay nanotubes (halloysite, imogolite, and chrysotile) are attracting renewed interest for photocatalysis applications thanks to their low production costs, their unique physical and chemical properties, and the possibility to functionalize or dope their structure to enhance charge-carriers separation into their structure. In this review, we provide new insights into the potential of these inorganic nanotubes in photocatalysis. We first discuss the structural and morphological features of clay nanotubes. Applications of photocatalysts based on clay nanotubes across a range of photocatalytic reactions, including the decomposition of organic pollutants, elimination of NOx, production of hydrogen, and disinfection of bacteria, are discussed. Finally, we highlight the obstacles and outline potential avenues for advancing the current photocatalytic system based on clay nanotubes. Our aim is that this review can offer researchers new opportunities to advance further research in the field of clay nanotubes-based photocatalysis with other vital applications in the future.

Applications of hollow nanostructures in water treatment considering organic, inorganic, and bacterial pollutants

One of the major issues of modern society is water contamination with different organic, inorganic, and contaminants bacteria. Finding cost-effective and efficient materials and methods for water treatment and environment remediation is among the scientists' most important considerations. Hollow-structured nanomaterials, including hollow fiber membranes, hollow spheres, hollow nanoboxes, etc., have shown an exciting capability for wastewater refinement approaches, including membrane technology, adsorption, and photocatalytic procedure due to their extremely high specific surface area, high porosity, unique morphology, and low density. Diverse hollow nanostructures could potentially eliminate organic contaminants, including dyes, antibiotics, oil/water emulsions, pesticides, and other phenolic compounds, inorganic pollutants, such as heavy metal ions, salts, phosphate, bromate, and other ions, and bacteria contaminations. Here, a comprehensive overview of hollow nanostructures' fabrication and modification, water contaminant classification, and recent studies in the water treatment field using hollow-structured nanomaterials with a comparative attitude have been provided, indicating the privilege abd detriments of this class of nanomaterials. Eventually, the future outlook of employing hollow nanomaterials in water refinery systems and the upcoming challenges arising in scaling up are also propounded.

Rational Design of Three Dimensional Hollow Heterojunctions for Efficient Photocatalytic Hydrogen Evolution Applications

The efficiency of photocatalytic hydrogen evolution is currently limited by poor light adsorption, rapid recombination of photogenerated carriers, and ineffective surface reaction rate. Although heterojunctions with innovative morphologies and structures can strengthen built-in electric fields and maximize the separation of photogenerated charges. However, how to rational design of novel multidimensional structures to simultaneously improve the above three bottleneck problems is still a research imperative. Herein, a unique Cu2O─S@graphene oxide (GO)@Zn0.67Cd0.33S Three dimensional (3D) hollow heterostructure is designed and synthesized, which greatly extends the carrier lifetime and effectively promotes the separation of photogenerated charges. The H2 production rate reached 48.5 mmol g-1 h-1 under visible light after loading Ni2+ on the heterojunction surface, which is 97 times higher than that of pure Zn0.67Cd0.33S nanospheres. Furthermore, the H2 production rate can reach 77.3 mmol g-1 h-1 without cooling, verifying the effectiveness of the photothermal effect. Meanwhile, in situ characterization and density flooding theory calculations reveal the efficient charge transfer at the p-n 3D hollow heterojunction interface. This study not only reveals the detailed mechanism of photocatalytic hydrogen evolution in depth but also rationalizes the construction of superior 3D hollow heterojunctions, thus providing a universal strategy for the materials-by-design of high-performance heterojunctions.

Photoelectrochemical Lithium Extraction from Waste Batteries

The amount of global hybrid-electric and all electric vehicle has increased dramatically in just five years and reached an all-time high of over 10 million units in 2022. A good deal of waste lithium (Li)-containing batteries from dead vehicles are invaluable unconventional resources with high usage of Li. However, the recycle of Li by green approaches is extremely inefficient and rare from waste batteries, giving rise to severe environmental pollutions and huge squandering of resources. Thus, in this mini review, we briefly summarized a green and promising route-photoelectrochemical (PEC) technology for extracting the Li from the waste lithium-containing batteries. This review first focuses on the critical factors of PEC performance, including light harvesting, charge-carrier dynamics, and surface chemical reactions. Subsequently, the conventional and PEC technologies applying in the area of Li recovery processes are analyzed and discussed in depth, and the potential challenges and future perspective for rational and healthy development of PEC Li extraction are provided positively.

Hollow Nanoreactors for Controlled Photocatalytic Behaviors: Fundamental Theory, Structure-Performance Relationship, and Catalytic Advantages

Hollow nanoreactors (HoNRs) have regarded as an attractive catalytic material for photocatalysis due to their exceptional capabilities in enhancing light harvesting, facilitating charge separation and transfer, and optimizing surface reactions. Developing novel HoNRs offers new options to realize controllable catalytic behavior. However, the catalytic mechanism of photocatalysis occurring in HoNRs has not yet been fully revealed. Against this backdrop, this review elaborates on three aspects: 1) the fundamental theoretical insights of HoNRs-driven photocatalytic kinetics; 2) structure-performance relationship of HoNRs to photocatalysis; 3) catalytic advantages of HoNRs in photocatalytic applications. Specifically, the review focuses on the fundamental theories of HoNRs for photocatalysis and their structural advantages for strengthening light scattering, promoting charge separation and transfer, and facilitating surface reaction kinetics, and the relationship between key structural parameters of HoNRs and their photocatalytic performance is in-depth discussed. Also, future prospects and challenges are proposed. It is anticipated that this review paper will pave the way for forthcoming investigations in the realm of HoNRs for photocatalysis.

Facile Synthesis of a Novel AgIO3/CTF Heterojunction and Its Adsorption-Photocatalytic Performance with Organic Pollutants

With the development of modern industry, the issue of water pollution has garnered increasing attention. Photocatalysis, as a novel green environmental technology that is resource-efficient, environmentally friendly, and highly promising, has found extensive applications in the field of organic pollutant treatment. However, common semiconductor materials exhibit either a relatively low photocatalytic efficiency in the visible light range or an inefficient separation of photogenerated charges, resulting in their limited ability to harness solar energy effectively. Consequently, the development of new photocatalysts has become a pivotal focus in current photocatalysis research to enhance solar energy utilization. This research provides a brief explanation of the photocatalytic mechanism of the AgIO3/CTF heterojunction photocatalyst. Due to the localized surface plasmon resonance (LSPR) effect, the Ag nanoparticles demonstrate significant absorption in the visible light region, playing a crucial role in the highly efficient photocatalytic reduction of organic pollutants.

Mesoscience in Hollow Multi-Shelled Structures

The prevalence of mesoscale complexity in materials science underscores the significance of the compromise in competition principle, which gives rise to the emergence of mesoscience. This principle offers valuable insights into understanding the formation process, characteristics, and performance of complex material systems, ultimately guiding the future design of such intricate materials. Hollow multi-shelled structures (HoMS) represent a groundbreaking multifunctional structural system that encompasses several spatial regimes. A plethora of mesoscale cases within HoMS present remarkable opportunities for exploring, understanding, and utilizing mesoscience, varying from the formation process of HoMS, to the mesoscale structural parameters, and finally the distinctive mass/energy transfer behaviors exhibited by HoMS. The compromise in competition between the diffusion and reaction contributes to the successful formation of multi-shells of HoMS, allowing for precise regulation of the structural parameters by dynamically varying the interplay between two dominances. Moreover, the distinct roles played by the shells and cavities within HoMS significantly influence the energy/mass transfer processes with the unique temporal-spatial resolution, providing guidance for customizing the application performance. Hopefully, the empirical and theoretical anatomy of HoMS following mesoscience would fuel new discoveries within this promising and complex multifunctional material system.

Solar-driven CO2-to-ethanol conversion enabled by continuous CO2 transport via a superhydrophobic Cu2O nano fence

The overall photocatalytic CO2 reduction reaction presents an eco-friendly approach for generating high-value products, specifically ethanol. However, ethanol production still faces efficiency issues (typically formation rates <605 μmol g-1 h-1). One significant challenge arises from the difficulty of continuously transporting CO2 to the catalyst surface, leading to inadequate gas reactant concentration at reactive sites. Here, we develop a mesoporous superhydrophobic Cu2O hollow structure (O-CHS) for efficient gas transport. O-CHS is designed to float on an aqueous solution and act as a nano fence, effectively impeding water infiltration into its inner space and enabling CO2 accumulation within. As CO2 is consumed at reactive sites, O-CHS serves as a gas transport channel and diffuser, continuously and promptly conveying CO2 from the gas phase to the reactive sites. This ensures a stable high CO2 concentration at reactive sites. Consequently, O-CHS achieves the highest recorded ethanol formation rate (996.18 μmol g-1 h-1) to the best of our knowledge. This strategy combines surface engineering with geometric modulation, providing a promising pathway for multi-carbon production.

Enabling Ultrafine Ru Nanoparticles with Tunable Electronic Structures via a Double-Shell Hollow Interlayer Confinement Strategy toward Enhanced Hydrogen Evolution Reaction Performance

Engineering of the catalysts' structural stability and electronic structure could enable high-throughput H2 production over electrocatalytic water splitting. Herein, a double-shell interlayer confinement strategy is proposed to modulate the spatial position of Ru nanoparticles in hollow carbon nanoreactors for achieving tunable sizes and electronic structures toward enhanced H2 evolution. Specifically, the Ru can be anchored in either the inner layer (Ru-DSC-I) or the external shell (Ru-DSC-E) of double-shell nanoreactors, and the size of Ru is reduced from 2.2 to 0.9 nm because of the double-shell confinement effect. The electronic structures are efficiently optimized thereby stabilizing active sites and lowering the reaction barrier. According to finite element analysis results, the mesoscale mass diffusion can be promoted in the double-shell configuration. The Ru-DSC-I nanoreactor exhibits a much lower overpotential (η10 = 73.5 mV) and much higher stability (100 mA cm-2). Our work might shed light on the precise design of multishell catalysts with efficient refining electrostructures toward electrosynthesis applications.

Structure and Defect Engineering Synergistically Boost High Solar-to-Chemical Conversion Efficiency of Cerium oxide/Au Hollow Nanomushrooms for Nitrogen Photofixation

Photocatalytic nitrogen fixation using solar illumination under ambient conditions is a promising strategy for production of the indispensable chemical NH3 . However, due to the catalyst's limitations in solar energy utilization, loss of hot electrons during transfer, and low nitrogen adsorption and activation capacity, the unsatisfactory solar-to-chemical conversion (SCC) efficiencies of most photocatalysts limit their practical applications. Herein, cerium oxide nanosheets with abundant strain-VO defects were anchored on Au hollow nanomushroom through atomically sharp interfaces to construct a novel semiconductor/plasmonic metal hollow nanomushroom-like heterostructure (denoted cerium oxide-AD/Au). Plasmonic Au extended the absorption of light from the visible to the second near-infrared region. The superior interface greatly enhanced the transfer efficiency of hot electrons. Abundant strain-VO defects induced by interfacial compressive strain promoted adsorption and in situ activation of nitrogen, and such synergistic promotion of strain and VO defects was further confirmed by density functional theory calculations. The judicious structural and defect engineering co-promoted the efficient nitrogen photofixation of the cerium oxide-AD/Au heterostructures with a SCC efficiency of 0.1 % under simulated AM 1.5G solar illumination, which is comparable to the average solar-to-biomass conversion efficiency of natural photosynthesis by typical plants, thus exhibiting significant potential as a new candidate for artificial photosynthesis.

Efficient electron transport by 1D CuZnInS modified 2D Ti3C2 MXene for enhanced photocatalytic hydrogen production

The efficiency of the photocatalytic reactionis mainly determined by the effective separation of photogenerated electron (e-) and hole (h+). As a high electrical conductivity, two-dimensional (2D) Ti3C2 MXene is widely used as an electronic transmission intermediary with a large surface area and active terminal. In this work, 1D CuZnInS are loaded on the surface of 2D Ti3C2 MXene nanosheets to compound 1D/2D CuZnInS/Ti3C2 nanocomposites with effective inhibition of charge-carrier recombination. The H2 production rate of optimized 1D/2D CuZnInS/Ti3C2 composite reached 15.24 mmol h-1 g-1, which is 4.5 times than that of pure CuZnInS (3.38 mmol h-1 g-1), and the apparent quantum efficiencies (AQEs) of composite photocatalysts can reach 0.39% and 0.24% under light irradiation at 365 nm and 420 nm wavelength, respectively. In addition, 1D/2D CuZnInS/Ti3C2 has high stability after 10 cycles. The enhanced photocatalytic performance is attributed to the large specific surface area of 2D Ti3C2 nanosheets, which facilitates the separation and transfer of photogenerated e- and h+ pairs.

Fabrication of Co3O4@ZnIn2S4 for photocatalytic hydrogen evolution: Insights into the synergistic mechanism of photothermal effect and heterojunction

Integration of photothermal materials and photocatalysts can effectively improve photocatalytic hydrogen production. However, the synergistic mechanism of photothermal effect and heterojunction still need to be deeply investigated. Herein, Co3O4@ZnIn2S4 (ZIS) core-shell heterojunction was constructed as a photothermal/ photocatalytic integrated system for photocatalytic hydrogen production. The photothermal effect induced by Co3O4 boosts the surface reaction kinetic of hydrogen evolution with an apparent activation energy decrease from 42.0 kJ⋅mol-1 to 33.5 kJ⋅mol-1. The photothermal effect also increases the charge concentrations of Co3O4@ZIS, which ameliorates the conductivity of Co3O4@ZIS and thus benefits to charge transfer. In addition, a p-n junction forms between Co3O4 and ZIS and provides a built-in electric field to enhance charge separate and prolong charge life time. Benefiting from the synergy of photothermal effect and heterojunction, the photocatalytic performance of Co3O4@ZIS is significantly improved with a highest hydrogen evolution rate of 4515 μmol⋅g-1⋅h-1, which is about 3.5 times higher than that of pure ZIS. This work offers a full perspective to understand the photothermal/photocatalytic integrated conception for solar hydrogen production.

Ternary dual S-scheme In2O3/SnIn4S8/CdS heterojunctions for boosted light-to-hydrogen conversion

Developing artificial S-scheme systems with highly active catalysts is significant to long-term solar-to-hydrogen conversion. Herein, CdS nanodots-modified hierarchical In2O3/SnIn4S8 hollow nanotubes were synthesized by an oil bath method for water splitting. Benefiting from the synergy among the hollow structure, tiny size effect, matched energy level positions, and abundant coupling heterointerfaces, the optimized nanohybrid attains an impressive photocatalytic hydrogen evolution rate of 110.4 µmol/h, and the corresponding apparent quantum yield reaches 9.7% at 420 nm. On In2O3/SnIn4S8/CdS interfaces, the migration of photoinduced electrons from both CdS and In2O3 to SnIn4S8via intense electronic interactions contributes to the ternary dual S-scheme modes, which are beneficial to promote faster spatial charge separation, deliver better visible light-harvesting ability, and provide more reaction active sites with high potentials. This work reveals protocols for rational design of on-demand S-scheme heterojunctions for sustainably converting solar energy into hydrogen in the absence of precious metals.

Self-supporting, hierarchically hollow structured NiFe-PBA electrocatalyst for efficient alkaline seawater oxidation

Seawater electrolysis, taking advantage of the huge seawater resource, holds great promise for sustainable hydrogen generation. Compared to conventional water electrolysis, seawater electrolysis is more challenging because of the more complex and corrosive electrolyte and competitive side reactions, which necessitates the development of highly efficient and stable electrocatalysts. In this study, a self-supporting, highly porous NiFe-PBA (Prussian-blue-analogue) electrocatalyst with a hierarchically hollow nanostructure is introduced, which exhibits impressive catalytic performance towards the oxygen evolution in alkaline seawater electrolytes. In NiFe-PBA, the synergistic interaction between Ni and Fe improves intrinsic conductivity for efficient electron transfer, enhances chemical stability in seawater, and boosts overall electrocatalytic activity. The direct use of self-supporting NiFe-PBA as an electrocatalyst avoids the energy-intensive and tedious pyrolysis procedure during the preparation process while making use of the tailored morphological, structural, and compositional benefits of PBA-based materials. By combining the NiFe-PBA catalyst with the NiMoN cathode, the constructed two-electrode electrolyzer achieved a high current density of 500 mA cm-2 at a low cell voltage of 1.782 V for overall electrolysis of alkaline seawater, demonstrating excellent durability for 100 hours. Our findings have important implications for the hydrogen economy and sustainable development through the development of robust and efficient PBA-based electrocatalysts for seawater electrolysis.

Nanocomposites of Cu2O with plasmonic metals (Au, Ag): design, synthesis, and photocatalytic applications

Metal-semiconductor nanocomposites have been utilized in a multitude of applications in a wide array of fields, prompting substantial interest from different scientific sectors. Of particular interest are semiconductors paired with plasmonic metals due to the unique optical properties that arise from the individual interactions of these materials with light and the intercomponent movement of charge carriers in their heterostructure. This review focuses on the pairing of Cu2O semiconductor with strongly plasmonic metals, particularly Au and Ag. The design and synthesis of Au-Cu2O and Ag-Cu2O nanostructures, along with ternary nanostructures composed of the three components, are described, with in-depth discussion on the synthesis techniques and tunable parameters. The effects of compositing on the optical and electronic properties of the nanocomposites in the context of photocatalysis are discussed as well. Concluding remarks and potential areas for exploration are presented in the last section.

Nontypical Wulff-Shape Silicon Nanosheets with High Catalytic Activity

Nanostructured silicon with an equilibrium shape has exhibited hydrogen evolution reaction activity mainly owing to its high surface area, which is distinct from that of bulk silicon. Such a Wulff shape of silicon favors low-surface-energy planes, resulting in silicon being an anisotropic and predictably faceted solid in which certain planes are favored, but this limits further improvement of the catalytic activity. Here, we introduce nanoporous silicon nanosheets that possess high-surface-energy crystal planes, leading to an unconventional Wulff shape that bolsters the catalytic activity. The high-index plane, uncommonly seen in the Wulff shape of bulk Si, has a band structure optimally aligned with the redox potential necessary for hydrogen generation, resulting in an apparent quantum yield (AQY) of 12.1% at a 400 nm wavelength. The enhanced light absorption in nanoporous silicon nanosheets also contributes to the high photocatalytic activity. Collectively, the strategy of making crystals with nontypical Wulff shapes can provide a route toward various classes of photocatalysts for hydrogen production.

Novel Bi2WO6/MWCNT nanohybrids synthesis for high-performance photocatalytic activity of ciprofloxacin degradation under simulated sunlight irradiation

In this research, novel Bi2WO6/MWCNT nanohybrids were synthesized via a cost-effective hydrothermal route. The photocatalytic performance of these specimens was tested through the photodegradation of Ciprofloxacin (CIP) under simulated sunlight. Various physicochemical techniques systematically characterized the prepared pure, Bi2WO6/MWCNT nanohybrid photocatalysts. The XRD and Raman spectra revealed the structural/phase properties of Bi2WO6/MWCNT nanohybrids. FESEM and TEM pictures revealed the attachment and distribution of plate-like Bi2WO6 nanoparticles along the nanotubes. The optical absorption and bandgap energy of Bi2WO6 was affected by the addition of MWCNT, which was analyzed by UV-DRS spectroscopy. The introduction of MWCNT reduces the bandgap value of Bi2WO6 from 2.76 to 2.46 eV. The BWM-10 nanohybrid showed superior photocatalytic activity for CIP photodegradation; 91.3% of CIP was degraded under sunlight irradiation. The PL and transient photocurrent test confirm that photoinduced charge separation efficiency is better in BWM-10 nanohybrids. The scavenger test indicates that h+ & •O2 have mainly contributed to the CIP degradation process. Furthermore, the BWM-10 catalyst demonstrated outstanding reusability and firmness in four successive cycles. It is anticipated that the Bi2WO6/MWCNT nanohybrids will be employed as photocatalysts for environmental remediation and energy conversion. This research presents a novel technique for developing an effective photocatalyst for pollutant degradation.

Integrating Enrichment, Reduction, and Oxidation Sites in One System for Artificial Photosynthetic Diluted CO2 Reduction

Artificial photosynthetic diluted CO2 reduction directly driven by natural sunlight is a challenging, but promising way to realize carbon-resources recycling utilization. Herein, a three-in-one photocatalytic system of CO2 enrichment, CO2 reduction and H2 O oxidation sites is designed for diluted CO2 reduction. A Zn-Salen-based covalent organic framework (Zn-S-COF) with oxidation and reductive sites is synthesized; then, ionic liquids (ILs) are loaded into the pores. As a result, [Emim]BF4 @Zn-S-COF shows a visible-light-driven CO2 -to-CO conversion rate of 105.88 µmol g-1 h-1 under diluted CO2 (15%) atmosphere, even superior than most photocatalysts in high concentrations CO2 . Moreover, natural sunlight driven diluted CO2 reduction rate also reaches 126.51 µmol g-1 in 5 h. Further experiments and theoretical calculations reveal that the triazine ring in the Zn-S-COF promotes the activity of H2 O oxidation and CO2 reduction sites, and the loaded ILs provide an enriched CO2 atmosphere, realizing the efficient photocatalytic activity in diluted CO2 reduction.

Confined Heterojunction in Hollow-Structured TiO2 and Its Directed Effect in Photodriven Seawater Splitting

The high salinity of seawater often strongly affects the activity and stability of photocatalysts utilized for photodriven seawater splitting. The current investigation is focused on the photocatalyst H-TiO2/Cu2O, comprised of hydroxyl-enriched hollow mesoporous TiO2 microspheres containing incorporated Cu2O nanoparticles. The design of H-TiO2/Cu2O is based on the hypothesis that the respective hollow and mesoporous structure and hydrophilic surfaces of TiO2 microspheres would stabilize Cu2O nanoparticles in seawater and provide efficient and selective proton adsorption. H-TiO2/Cu2O shows hydrogen production performances of 45.7 mmol/(g·h) in simulated seawater and 17.9 mmol/(g·h) in natural seawater, respectively. An apparent quantum yield (AQY) in hydrogen production of 18.8% in water (and 14.9% in natural seawater) was obtained at 365 nm. Moreover, H-TiO2/Cu2O displays high stability and can maintain more than 90% hydrogen evolution activity in natural seawater for 30 h. A direct mass- and energy- transfer mechanism is proposed to clarify the superior performance of H-TiO2/Cu2O in seawater splitting.

Nanomaterials for Advanced Photocatalytic Plastic Conversion

As the disposal of waste plastic emerges as a societal problem, photocatalytic waste plastic conversion is attracting significant attention. Ultimately, for a sustainable future, the development of an eco-friendly plastic conversion technology is essential for breaking away from the current plastic use environment. Compared to conventional methods, photocatalysis can be a more environmentally friendly option for waste plastic reprocessing because it uses sunlight as an energy source under ambient temperature and pressure. In addition to this, waste plastics can be upcycled (i.e., converted into useful chemicals or fuels) to enhance their original value via photocatalytic methods. Among various strategies for improving the efficiency of the photocatalytic method, nanomaterials have played a pivotal role in suppressing charge recombination. Hence, in recent years, attempts have been made to introduce nanomaterials/nanostructures into photocatalytic plastic conversion on the basis of advances in material-based studies using simple photocatalysts. In line with this trend, the present review examines the nanomaterials/nanostructures that have been recently developed for photocatalytic plastic conversion and discusses the direction of future development.

Polymeric Bowl-Shaped Nanoparticles: Hollow Structures with a Large Opening on the Surface

Polymeric bowl-shaped nanoparticles (BNPs) are anisotropic hollow structures with large openings on the surface, which have shown advantages such as high specific area and efficient encapsulation, delivery and release of large-sized cargoes on demand compared to solid nanoparticles or closed hollow structures. Several strategies have been developed to prepare BNPs based on either template or template-free methods. For instance, despite the widely used self-assembly strategy, alternative methods including emulsion polymerization, swelling and freeze-drying of polymeric spheres, and template-assisted approaches have also been developed. It is attractive but still challenging to fabricate BNPs due to their unique structural features. However, there is still no comprehensive summary of BNPs up to now, which significantly hinders the further development of this field. In this review, the recent progress of BNPs will be highlighted from the perspectives of design strategies, preparation methods, formation mechanisms, and emerging applications. Moreover, the future perspectives of BNPs will also be proposed.

Recent advances and progress in biotemplate catalysts for electrochemical energy storage and conversion

Complex structures and morphologies in nature endow materials with unexpected properties and extraordinary functions. Biotemplating is an emerging strategy for replicating nature structures to obtain materials with unique morphologies and improved properties. Recently, efforts have been made to use bio-inspired species as a template for producing morphology-controllable catalysts. Fundamental information, along with recent advances in biotemplate metal-based catalysts are presented in this review through discussions of various structures and biotemplates employed for catalyst preparation. This review also outlines the recent progress on preparation routes of biotemplate catalysts and discusses how the properties and structures of these templates play a crucial role in the final performance of metal-based catalysts. Additionally, the application of bio-based metal and metal oxide catalysts is highlighted for various key energy and environmental technologies, including photocatalysis, fuel cells, and lithium batteries. Biotemplate metal-based catalysts display high efficiency in several energy and environmental systems. Note that this review provides guidance for further research in this direction.

Photosynthesis of Hydrogen Peroxide Based on g-C3 N4 : The Road of a Cost-Effective Clean Fuel Production

Emerging artificial photosynthesis promises to offer a competitive means for solar energy conversion and further solves the energy crisis facing the world. Hydrogen peroxide (H2 O2 ), which is considered as a benign oxidant and a prospective liquid fuel, has received worldwide attention in the field of artificial photosynthesis on account of the source materials are just oxygen, water, and sunlight. Graphitic carbon nitride (g-C3 N4 )-based photocatalysts for H2 O2 generation have attracted extensive research interest due to the intrinsic properties of g-C3 N4 . In this review, research processes for H2 O2 generation on the basis of g-C3 N4 , including development, fabrication, merits, and disadvantages, and the state-of-the-art methods to enhance the performance are summarized after a brief introduction and the mechanism analysis of an efficient catalytic system. Also, recent applications of g-C3 N4 -based photocatalysts for H2 O2 production are reviewed, and the significance of active sites and synthetic pathways are highlighted from the view of reducing barriers. Finally, this paper ends with some concluding remarks to reveal the issues and opportunities of g-C3 N4 -based photocatalysts for producing H2 O2 in a high yield.

Selective Cocatalyst Decoration of Narrow-Bandgap Broken-Gap Heterojunction for Directional Charge Transfer and High Photocatalytic Properties

Narrow-bandgap semiconductors are promising photocatalysts facing the challenges of low photoredox potentials and high carrier recombination. Here, a broken-gap heterojunction Bi/Bi2 S3 /Bi/MnO2 /MnOx , composed of narrow-bandgap semiconductors, is selectively decorated by Bi, MnOx nanodots (NDs) to achieve robust photoredox ability. The Bi NDs insertion at the Bi2 S3 /MnO2 interface induces a vertical carrier migration to realize sufficient photoredox potentials to produce O2 •- and • OH active species. The surface decoration of Bi2 S3 /Bi/MnO2 by Bi and MnOx cocatalysts drives electrons and holes in opposite directions for optimal photogenerated charge separation. The selective cocatalysts decoration realizes synergistic surface and bulk phase carrier separation. Density functional theory (DFT) calculation suggests that Bi and MnOx NDs act as active sites enhancing the absorption and reactants activation. The decorated broken-gap heterojunction demonstrates excellent performance for full-light driving organic pollution degradation with great commercial application potential.

Synergistic effects of rare earth doping and carbon quantum dots on BiOF/Bi2MoO6 heterojunctions for enhanced visible-near-infrared photocatalysis

Herein, we designed and synthesized a series of rare earth doped BiOF/Bi₂MoO₆ heterojunctions. The doping locations of rare earth ions were altered to determine the influence on the visible and near-infrared photocatalytic activity of heterojunctions. It is experimentally and theoretically confirmed that doping with Tm³⁺/Yb³⁺ in one semiconductor of the heterojunction produces superior photocatalytic efficiency than doping in both semiconductors. In addition, the near infrared photocatalytic efficiency strongly relied on upconversion luminescence from the Re³⁺ doped semiconductor in the heterojunction. By further modifying with CQDs, the CQDs/BiOF:Tm³⁺,Yb³⁺/Bi₂MoO₆ sample shows excellent visible and near-infrared photocatalytic performance, with 90% degradation of RhB occurring in the first 20 min under visible irradiation. This can be attributed to the large BET area, efficient photoinduced carrier separation and the upconversion process of the composite. This research will provide a systematic solution for realizing full-spectrum responsive and highly efficient photocatalysis by combination of rare earth ion doping, quantum dot modification and Z-scheme heterojunctions.

Near-Infrared Copper Sulfide Hollow Nanostructures with Enhanced Photothermal and Photocatalytic Performance for Effective Bacterial Sterilization

The development of nonantibiotic strategies to combat bacterial infection is highly needed, owing to the widespread infectious disease and bacterial resistance becoming a significant health threat to the world's population. In recent years, photoactivated antibacterial therapies including photocatalytic and photothermal therapies have attracted increasing attention due to their high efficiency and low side effect. Herein, we introduce a copper sulfide (Cu_2-xS) hollow nanostructure-based near-infrared antibacterial platform with synergy photothermal and photocatalytic properties for effective bacterial sterilization. Compared to traditional Cu_2-xS nanoparticles, this unique hollow Cu_2-xS nanostructure can generate multiple scattered light, which is conducive to light collection. Moreover, its thin shell can shorten the transmission distance of carrier, thus reducing the charge recombination that usually causes the greatest energy loss. As a result, such a Cu_2-xS hollow nanostructure enables enhanced photothermal and photocatalytic bacterial killing activities against both Escherichia coli and Staphylococcus aureus, showing promise for antibiotic-free infection treatment and other bacterial sterilization applications.

Enhancing piezocatalytic H2O2 production through morphology control of graphitic carbon nitride

Piezocatalytic H₂O₂ production has attracted significant attention as a green alternative to traditional anthraquinone methods with heavy environmental pollution and high energy consumption. However, since the efficiency of piezocatalyst in producing H₂O₂ is poor, searching for a suitable method to improve the yield of H₂O₂ is of great interest. Herein, a series of graphitic carbon nitride (g-C₃N₄) with different morphologies (hollow nanotube, nanosheet and hollow nanosphere) are applied to enhance the piezocatalytic performance in yielding H₂O₂. The hollow nanotube g-C₃N₄ exhibited an outstanding H₂O₂ generation rate of 262 umol·g^-1·h^-1 without any co-catalyst, which is 1.5 and 6.2 times higher than nanosheets and hollow nanospheres, respectively. Piezoelectric response force microscopy, piezoelectrochemical tests, and Finite Element Simulation results revealed that the excellent piezocatalytic property of hollow nanotube g-C₃N₄ is mainly attributed to its larger piezoelectric coefficient, higher intrinsic carrier density, and stronger external stress absorption conversion. Furthermore, mechanism analysis indicated that piezocatalytic H₂O₂ production follows a two-step single-electro pathway, and the discovery of ¹O₂ furnishes a new insight into explore this mechanism. This study offers a new strategy for the eco-friendly manufacturing of H₂O₂ and a valuable guide for future research on morphological modulation in piezocatalysis.

Constructing Spatially Separated Cage-Like Z-scheme Heterojunction Photocatalyst for Enhancing Photocatalytic H2 Evolution

Heterojunctions coupled into micro-mesoscopic structures is an attractive strategy to optimize the light harvesting and carrier separation of semiconductor photocatalysts. A self-templating method of ion exchange is reported to synthesize an exquisite hollow cage-structured Ag₂ S@CdS/ZnS that direct Z-scheme heterojunction photocatalyst. On the ultrathin shell of the cage, Ag₂ S, CdS, and ZnS with Zn-vacancies (V_Zn ) are arranged sequentially from outside to inside. Among them, the photogenerated electrons are excited by ZnS to the V_Zn energy level and then recombine with the photogenerated holes that are generated by CdS, while the electrons remained in the CdS conduction band are further transferred to Ag₂ S. The ingenious cooperation of the Z-scheme heterojunction with the hollow structure optimizes the photogenerated charges transport channel, spatially separated the oxidation and reduction half-reactions, decreases the charge recombination probability, and simultaneously improves the light harvesting efficiency. As a result, the photocatalytic hydrogen evolution activity of the optimal sample is 136.6 and 17.3 times higher than that of cage-like ZnS with V_Zn and CdS by, respectively. This unique strategy demonstrates the tremendous potential of the incorporation of heterojunction construction to morphology design of photocatalytic materials, and also provided a reasonable route for designing other efficient synergistic photocatalytic reactions.

Efficient photo-Fenton reaction for tetracycline and antibiotic resistant bacteria removal using hollow Fe-doped In2O3 nanotubes: From theoretical research to practical application

The low exposure of active sites and the slow electron transfer rate still restrict the wide application of the photo-Fenton system of Fe-based photocatalyst in practical water treatment. Herein, we prepared a hollow Fe-doped In₂O₃ nanotube (h-Fe-In₂O₃) catalyst for activating hydrogen peroxide (H₂O₂) to remove tetracycline (TC) and antibiotic resistant bacteria (ARB). Incorporation of Fe could shorten the band gap and increase the absorption capacity of visible light. Meanwhile, the increase of electron density at the Fermi level promotes the interfacial electron transport. The large specific surface area of the tubular structure exposes more Fe active site and the Fe-O-In site reduces the energy barrier of H₂O₂ activation, resulting in more and faster formation of hydroxyl radicals (•OH). After continuous operation for 600 min, the h-Fe-In₂O₃ reactor still can remove 85% TC and about 3.5 log ARB in secondary effluent, showing good stability and durability for practical wastewater treatment.

Promoting the electrocatalytic oxygen evolution reaction on NiCo2O4 with infrared-thermal effect: A strategy to utilize the infrared solar energy to reduce activation energy during water splitting

Utilization of the infrared (IR) solar energy remains a challenging task for traditional photo(electro)catalysis. Taking advantage of the IR-thermal effect to facilitate sluggish electrocatalytic reactions emerges as a promising way to utilize the IR band of the solar spectrum. In this work, nickel foam (NF) supported NiCo₂O₄ nanoneedles (NF/NiCo₂O₄ NNs) were prepared to promote the oxygen evolution reaction (OER) via the IR-thermal effect, with the NF/NiCo₂O₄ NNs acting as both the IR absorbing antennae and the OER active anode. The potential required to deliver a current density of 200 mA cm^-2 is negatively shifted from 1.618 V in the dark to 1.578 V under IR irradiation, and the Tafel slope is also decreased from 106 to 89 mV dec^-1. We demonstrate that the enhancement of OER activity is due to the localized temperature rise under IR irradiation. We measured the electrochemical activation energy of OER on NF/NiCo₂O₄ with and without IR irradiation, and the results reveal that IR irradiation reduces the kinetic energy barrier of the OER by IR-thermal effect and then facilitates OER kinetics. This work highlights a new approach to utilizing the IR portion of the sunlight to produce renewable hydrogen energy via water splitting.

Synthesis and Nanostructure Investigation of Hybrid β-Ga2 O3 /ZnGa2 O4 Nanocomposite Networks with Narrow-Band Green Luminescence and High Initial Electrochemical Capacity

The material design of functional "aero"-networks offers a facile approach to optical, catalytical, or and electrochemical applications based on multiscale morphologies, high large reactive area, and prominent material diversity. Here in this paper, the synthesis and structural characterization of a hybrid β-Ga₂ O₃ /ZnGa₂ O₄ nanocomposite aero-network are presented. The nanocomposite networks are studied on multiscale with respect to their micro- and nanostructure by X-ray diffraction (XRD) and transmission electron microscopy (TEM) and are characterized for their photoluminescent response to UV light excitation and their electrochemical performance with Li-ion conversion reaction. The structural investigations reveal the simultaneous transformation of the precursor aero-GaN(ZnO) network into hollow architectures composed of β-Ga₂ O₃ and ZnGa₂ O₄ nanocrystals with a phase ratio of ≈1:2. The photoluminescence of hybrid aero-β-Ga₂ O₃ /ZnGa₂ O₄ nanocomposite networks demonstrates narrow band (λ_em  = 504 nm) green light emission of ZnGa₂ O₄ under UV light excitation (λ_ex  = 300 nm). The evaluation of the metal-oxide network performance for electrochemical application for Li-ion batteries shows high initial capacities of ≈714 mAh g^-1 at 100 mA g^-1 paired with exceptional rate performance even at high current densities of 4 A g^-1 with 347 mAh g^-1 . This study provides is an exciting showcase example of novel networked materials and demonstrates the opportunities of tailored micro-/nanostructures for diverse applications a diversity of possible applications.

Hollow Spherical Pd/CdS/NiS with Carrier Spatial Separation for Photocatalytic Hydrogen Generation

Inspired by the unique properties of the three-dimensional hollow nanostructures in the field of photocatalysis, as well as the combination of co-catalyst, porous hollow spherical Pd/CdS/NiS photocatalysts are prepared by stepwise synthesis. The results show that the Schottky junction between Pd and CdS accelerates the transport of photogenerated electrons, while a p-n junction between NiS and CdS traps the photogenerated holes. As co-catalysts, the Pd nanoparticles and the NiS are loaded inside and outside the hollow CdS shell layer, respectively, which combines with the particular characteristic of the hollow structure, resulting in a spatial carrier separation effect. Under the synergy of the dual co-catalyst loading and hollow structure, the Pd/CdS/NiS has favorable stability. Its H₂ production under visible light is significantly increased to 3804.6 μmol/g/h, representing 33.4 times more than that of pure CdS. The apparent quantum efficiency is 0.24% at 420 nm. A feasible bridge for the development of efficient photocatalysts is offered by this work.

g-C3N4-wrapped nickel doped zinc oxide/carbon core-double shell microspheres for high-performance photocatalytic hydrogen production

The development of efficient heterojunctions with enhanced photocatalytic properties is considered a promising approach for photocatalytic hydrogen production. In this study, graphitic carbon nitride (g-C₃N₄)-wrapped nickel-doped zinc oxide/carbon (Ni-ZnO@C/g-C₃N₄) core-double shell heterojunctions with unique core-double shell structures were employed as efficient photocatalysts through an innovative approach. Ni doping can enhance the intensity and range of visible light absorption in ZnO, and the carbon core coupled with the hollow double-shell structure can accelerate the charge transfer rate and improve the photon utilization efficiency. Meanwhile, the construction of the Z-scheme heterojunction extended the electron-hole pair transport path. In addition, the Z-scheme charge-transfer mechanism of Ni-ZnO@C/g-C₃N₄ under simulated sunlight was verified by photoluminescence (PL) and electron spin resonance (ESR) experiments. As a result, the obtained photocatalyst acquired a high hydrogen evolution rate of 336.08 μmol g^-1h^-1, which is 36.49 times higher than that of pristine ZnO. Overall, this work may provide a pathway for the construction of highly efficient photocatalysts with unique core-double shell structures.

Carbazole-Involved Conjugated Microporous Polymer Hollow Spheres for Selective Photocatalytic Oxidation of Benzyl Alcohol under Visible-Light Irradiation

Conjugated microporous polymers (CMPs) have been considered a type of promising visible-light-driven, organic photocatalysts. However, apart from designing high-performance CMPs from a molecular perspective, little attention is paid to improving the photocatalytic properties of these polymers through macrostructural regulation. Herein, we prepared a kind of hollow spherical CMPs involving carbazole monomers and studied their performance on the selective photocatalytic oxidation of benzyl alcohol under visible light irradiation. The results demonstrate that the introduction of a hollow spherical structure improves the physicochemical properties of the as-designed CMPs, including the specific surface areas, optoelectronic characteristics, as well as photocatalytic performance, etc. In particular, the hollow CMPs can more effectively oxidize benzyl alcohol compared to pristine ones under blue light illumination, and produce >1 mmol of benzaldehyde in 4.5 h with a yield of up to 9 mmol·g^-1·h^-1, which is almost 5 times higher than that of the pristine ones. Furthermore, such hollow architecture has a similar enhanced effect on the oxidation of some other aromatic alcohols. This work shows that the deliberate construction of specific macrostructures can better arouse the photocatalytic activity of the as-designed CMPs, which will contribute to the further use of these organic polymer semiconductors in photocatalysis areas.

2D Transition Metal Dichalcogenides for Photocatalysis

Two-dimensional (2D) transition metal dichalcogenides (TMDs), a rising star in the post-graphene era, are fundamentally and technologically intriguing for photocatalysis. Their extraordinary electronic, optical, and chemical properties endow them as promising materials for effectively harvesting light and catalyzing the redox reaction in photocatalysis. Here, we present a tutorial-style review of the field of 2D TMDs for photocatalysis to educate researchers (especially the new-comers), which begins with a brief introduction of the fundamentals of 2D TMDs and photocatalysis along with the synthesis of this type of material, then look deeply into the merits of 2D TMDs as co-catalysts and active photocatalysts, followed by an overview of the challenges and corresponding strategies of 2D TMDs for photocatalysis, and finally look ahead this topic.

Research Progress of Tungsten Oxide-Based Catalysts in Photocatalytic Reactions

Photocatalysis technology is a potential solution to solve the problem of environmental pollution and energy shortage, but its wide application is limited by the low efficiency of solar energy conversion. As a non-toxic and inexpensive n-type semiconductor, WO3 can absorb approximately 12% of sunlight which is considered one of the most attractive photocatalytic candidates. However, the narrow light absorption range and the high recombination rate of photogenerated electrons and holes restrict the further development of WO3-based catalysts. Herein, the studies on preparation and modification methods such as doping element, regulating defects and constructing heterojunctions to enlarge the range of excitation light to the visible region and slow down the recombination of carriers on WO3-based catalysts so as to improve their photocatalytic performance are reviewed. The mechanism and application of WO3-based catalysts in the dissociation of water, the degradation of organic pollutants, as well as the hydrogen reduction of N2 and CO2 are emphatically investigated and discussed. It is clear that WO3-based catalysts will play a positive role in the field of future photocatalysis. This paper could also provide guidance for the rational design of other metallic oxide (MOx) catalysts for the increasing conversion efficiency of solar energy.

Recent Developments of Light-Harvesting Excitation, Macroscope Transfer and Multi-Stage Utilization of Photogenerated Electrons in Rotating Disk Photocatalytic Reactor

The rotating disk photocatalytic reactor is a kind of photocatalytic wastewater treatment technique with a high application potential, but the light energy utilization rate and photo quantum efficiency still need to be improved. Taking photogenerated electrons as the starting point, the following contents are reviewed in this work: (1) Light-harvesting excitation of photogenerated electrons. Based on the rotating disk thin solution film photocatalytic reactor, the photoanodes with light capture structures are reviewed from the macro perspective, and the research progress of light capture structure catalysts based on BiOCl is also reviewed from the micro perspective. (2) Macroscope transfer of photogenerated electrons. The research progress of photo fuel cell based on rotating disk reactors is reviewed. The system can effectively convert the chemical energy in organic pollutants into electrical energy through the macroscopic transfer of photogenerated electrons. (3) Multi-level utilization of photogenerated electrons. The photogenerated electrons transferred to the cathode can also generate H2O2 with oxygen or H2 with H+, and the reduction products can also be further utilized to deeply mineralize organic pollutants or reduce the nitrate in water. This short review will provide theoretical guidance for the further application of photocatalytic techniques in wastewater treatment.

Controlled gold-palladium cores in ceria hollow spheres as nanoreactor for plasmon-enhanced catalysis under visible light irradiation

Visible-light-driven organic transformations boosting by localized surface plasmon resonance (LSPR) have been attracting considerable interests. Gold-palladium (Au-Pd) bimetallic nanoparticles (NPs) are considered as ideal plasmonic catalysts realizing efficient light-driven catalysis. Nevertheless, stability and adjustability of plasmonic Au-Pd NPs remain to be a challenging task. Herein, we designed the controlled Au-Pd cores in ceria (CeO₂) hollow spheres (Au-Pd@h-CeO₂) as nanoreactor for Suzuki cross-coupling reactions. Under visible light irradiation, the Au-Pd@h-CeO₂ exhibited remarkable photocatalytic performance with a turnover frequency (TOF) value as high as 797 h^-1. More impressively, the coupling reactions of aryl chlorides bearing electron-withdrawing groups proceeded better and afforded the corresponding desired products in good yields. Detailed structural, optical and photoelectrochemical characterizations unraveled that the enhanced photocatalytic efficiency of Au-Pd@h-CeO₂ was attributed to the LSPR effect of controllable Au-Pd cores and their synergetic effect of hollow CeO₂ shells. The merits of this hollow sphere architecture lied on as followed: (I) Incident light could be reflected and refracted between the inner cores and outer shells, which extended the trapping of incident light, and then enhanced the light harvesting efficiency; (II) the mesoporous architecture of CeO₂ hollow spheres provided a huge specific surface area and numerous mesoporous channels, which could enhance the absorption of reactants and provided more active sites; (III) LSPR excitation of Au-Pd NPs and band-gap excitation of CeO₂ simultaneously occurred under visible light illumination, inducing a more efficient separation and transfer of charge carriers. Furthermore, due to the confinment effect of CeO₂ shells, the Au-Pd@h-CeO₂ exhibited an excellent reusability after six cycles without significant deactivation of yield. Our findings provided a facile way to design highly efficient plasmonic-enhanced photocatalysts utilized for catalytic organic reactions.

Compression Stress-Induced Internal Magnetic Field in Bulky TiO2 Photoanodes for Enhancing Charge-Carrier Dynamics

Enhancing charge-carrier dynamics is imperative to achieve efficient photoelectrodes for practical photoelectrochemical devices. However, a convincing explanation and answer for the important question which has thus far been absent relates to the precise mechanism of charge-carrier generation by solar light in photoelectrodes. Herein, to exclude the interference of complex multi-components and nanostructuring, we fabricate bulky TiO₂ photoanodes through physical vapor deposition. Integrating photoelectrochemical measurements and in situ characterizations, the photoinduced holes and electrons are transiently stored and promptly transported around the oxygen-bridge bonds and 5-coordinated Ti atoms to form polarons on the boundaries of TiO₂ grains, respectively. Most importantly, we also find that compressive stress-induced internal magnetic field can drastically enhance the charge-carrier dynamics for the TiO₂ photoanode, including directional separation and transport of charge carriers and an increase of surface polarons. As a result, bulky TiO₂ photoanode with high compressive stress displays a high charge-separation efficiency and an excellent charge-injection efficiency, leading to 2 orders of magnitude higher photocurrent than that produced by a classic TiO₂ photoanode. This work not only provides a fundamental understanding of the charge-carrier dynamics of the photoelectrodes but also provides a new paradigm for designing efficient photoelectrodes and controlling the dynamics of charge carriers.

Synthesis of the ZnTPyP/WO3 nanorod-on-nanorod heterojunction direct Z-scheme with spatial charge separation ability for enhanced photocatalytic hydrogen generation

The direct Z-scheme photocatalytic system can effectively improve the separation efficiency of photogenerated carriers through the photosynthesis-based photocarrier transport model. In this study, zinc porphyrin-assembled nanorods (ZnTPyP) and WO₃ nanorods' nanorod-on-nanorod heterojunctions (ZnTPyP/WO₃) were successfully prepared through a simple modified acid-base neutralization micelle-confined assembly method using WO₃ nanorods as the nucleation template and ZnTPyP as building blocks. ZnTPyP achieved a controllable assembly onto WO₃ nanorods through N-W coordination. ZnTPyP/WO₃ nanorod-on-nanorod heterojunctions exhibited a structure-dependent photocatalytic performance for hydrogen production. The ZnTPyP/WO₃ nanorod-on-nanorod heterojunctions exhibited a optimal hydrogen production rate (74.53 mmol g^-1 h^-1) using Pt as the co-catalyst, which was 2.64 times that of the ZnTPyP self-assembled nanorods. The improvement in the photocatalytic hydrogen production efficiency could be mainly attributed to the direct Z-scheme electron-transfer mechanism from WO₃ to ZnTPyP. This is the first report of an approach using porphyrin-assembled nanostructures to construct organic-inorganic Z-scheme photocatalysts. This study offers valuable information for preparing new efficient photocatalysts based on organic supramolecular orderly aggregate materials.