Highly Stable and Efficient FASnI3 -Based Perovskite Solar Cells by Introducing Hydrogen Bonding

Minimization of Energy Level Mismatch of PCBM and Surface Passivation for Highly Stable Sn-Based Perovskite Solar Cells by Doping n-Type Polymer

Developing high-performance and stable Sn-based perovskite solar cells (PSCs) is difficult due to the inherent tendency of Sn2+ oxidation and, the huge energy mismatch between perovskite and Phenyl-C61-butyric acid methyl ester (PCBM), a frequently employed electron transport layer (ETL). This study demonstrates that perovskite surface defects can be passivated and PCBM's electrical properties improved by doping n-type polymer N2200 into PCBM. The doping of PCBM with N2200 results in enhanced band alignment and improved electrical properties of PCBM. The presence of electron-donating atoms such as S, and O in N2200, effectively coordinates with free Sn2+ to prevent further oxidation. The doping of PCBM with N2200 offers a reduced conduction band offset (from 0.38 to 0.21 eV) at the interface between the ETL and perovskite. As a result, the N2200 doped PCBM-based PSCs show an enhanced open circuit voltage of 0.79 V with impressive power conversion efficiency (PCE) of 12.98% (certified PCE 11.95%). Significantly, the N2200 doped PCBM-based PSCs exhibited exceptional stability and retained above 90% of their initial PCE when subjected to continuous illumination at maximum power point tracking for 1000 h under one sun.

Cyano-Coordinated Tin Halide Perovskites for Wearable Health Monitoring and Weak Light Imaging

Low-toxicity tin halide perovskites with excellent optoelectronic properties are promising candidates for photodetection. However, tin halide perovskite photodetectors have suffered from high dark current owing to uncontrollable Sn2+ oxidation. Here, 2-cyanoethan-1-aminium iodide (CNI) is introduced in CH(NH2)2SnI3 (FASnI3) perovskite films to inhibit Sn2+ oxidation by the strong coordination interaction between the cyano group (C≡N) and Sn2+. Consequently, FASnI3-CNI films exhibit reduced nonradiative recombination and lower trap density. The self-powered photodetector based on FASnI3-CNI exhibits low dark current (1.04 × 10-9 A cm-2), high detectivity (2.2 × 1013 Jones at 785 nm), fast response speed (2.62 µs), and good stability. Mechanism studies show the increase in the activation energy required for thermal emission and generated carriers, leading to a lower dark current in the FASnI3-CNI photodetector. In addition, flexible photodetectors based on FASnI3-CNI, exhibiting high detectivity and fast response speed, are employed in wearable electronics to monitor the human heart rate under weak light and zero bias conditions. Finally, the FASnI3-CNI perovskite photodetectors are integrated with a 32 × 32 thin-film transistor backplane, capable of ultraweak light (170 nW cm-2) real-time imaging with high contrast, and zero power consumption, demonstrating the great potential for image sensor applications.

Deploying a Dipole Electric Field at the CsPbI3 Perovskite/Carbon Interface for Enhancing Hole Extraction and Photovoltaic Performance

Carbon-based CsPbI3 perovskite solar cells without hole transporter (C-PSCs) have achieved intense attention due to its simple device structure and high chemical stability. However, the severe interface energy loss at the CsPbI3/carbon interface, attributed to the lower hole selectivity for inefficient charge separation, greatly limits device performance. Hence, dipole electric field (DEF) is deployed at the above interface to address the above issue by using a pole molecule, 4-trifluoromethyl-Phenylammonium iodide (CF3-PAI), in which the ─NH3 group anchors on the perovskite surface and the ─CF3 group extends away from it and connects with carbon electrode. The DEF is proven to align with the built-in electric field, that is pointing toward carbon electrode, which well enhances hole selectivity and charge separation at the interface. Besides, CF3-PAI molecules also serve as defect passivator for reducing trap state density, which further suppresses defect-induced non-radiative recombination. Consequently, the CsPbI3 C-PSCs achieve an excellent efficiency of 18.33% with a high VOC of 1.144 V for inorganic C-PSCs without hole transporter.

Anion Binding Interaction Enhances the Robustness of Iodide for High-Performance Perovskite Solar Cells

Owing to the ionic bond nature of the Pb-I bond, the iodide at the interface of perovskite polycrystalline films was easily lost during the preparation process, resulting in the formation of a large number of iodine vacancy defects. The presence of iodine vacancy defects can cause nonradiative recombination, provide a pathway for iodide migration, and be harmful to the power conversion efficiency (PCE) and stability of organic-inorganic hybrid perovskite solar cells (HPSCs). Here, in order to increase the robustness of iodides at the interface, a strategy to introduce anion binding effects was developed to stabilize the perovskite films. It was demonstrated that the N,N'-diphenylurea (DPU), characterized by high anionic binding constants and a Y-shaped structure, provides a relatively strong hydrogen bond donor site to effectively reduce the iodine loss during film preparation and inhibits iodide migration in the device working condition. As expected, the reduced iodine loss considerably improves the quality of the perovskite films and suppresses nonradiative recombination. The performance of the device after DPU modification was significantly increased, with the PCE rising from 23.65 to 25.01% with huge stability enhancement as well.

Fluorinated Polyimide Tunneling Layer for Efficient and Stable Perovskite Photovoltaics

Despite the remarkable progress of perovskite solar cells (PSCs), challenges remain in terms of finding effective and viable strategies to enhance their long-term stability while maintaining high efficiency. In this study, a new insulating and hydrophobic fluorinated polyimide (FPI: 6FDA-6FAPB) was used as the interface layer between the perovskite layer and the hole transport layer (HTL) in PSCs. The functional groups of FPI play a pivotal role in passivating interface defects within the device. Due to its high work function, FPI demonstrates field-effect passivation (FEP) capabilities as an interface layer, effectively mitigating non-radiative recombination at the interface. Notably, the FPI insulating interface layer does not impede carrier transmission at the interface, which is attributed to the presence of hole tunneling effects. The optimized PSCs achieve an outstanding power conversion efficiency (PCE) of 24.61 % and demonstrate excellent stability, showcasing the efficacy of FPI in enhancing device performance and reliability.

Modulating Nucleation and Crystal Growth of Tin Perovskite Films for Efficient Solar Cells

The performance of tin halide perovskite solar cells (PSCs) has been severely limited by the rapid crystallization of tin perovskites, which usually leads to an undesirable film quality. In this work, we tackle this issue by regulating the nucleation and crystal growth of tin perovskite films using a small Lewis base additive, urea. The urea-SnI2 interaction facilitates the formation of larger and more uniform clusters, thus accelerating the nucleation process. Additionally, the crystal growth process is extended, resulting in a high-quality tin perovskite film with compact morphology, increased crystallinity, and reduced defects. Consequently, the efficiency of tin PSCs is significantly increased from 10.42% to 14.22%. This work highlights the importance of manipulating the nucleation and crystal growth of tin perovskites to realize efficient tin PSCs.

SCAPS-1D simulated organometallic halide perovskites: A comparison of performance under Sub-Saharan temperature condition

Photovoltaic technology has been widely recognized as a means to advance green energy solutions in the sub-Saharan region. In the real-time operation of solar modules, temperature plays a crucial role, making it necessary to evaluate the thermal impact on the performance of the solar devices, especially in high-insolation environments. Hence, this paper investigates the effect of operating temperature on the performance of two types of organometallic halide perovskites (OHP) - formamidinium tin iodide (FASnI3) and methylammonium lead iodide (MAPbI3). The solar cells were evaluated under a typical Nigerian climate in two different cities before and after graphene passivation. Using a one-dimensional solar capacitance simulation software (SCAPS-1D) program, the simulation results show that graphene passivation improved the conversion efficiency of the solar cells by 0.51 % (FASnI3 device) and 3.11 % (MAPbI3 device). The presence of graphene played a vital role in resisting charge recombination and metal diffusion, which are responsible for the losses in OHP. Thermal analysis revealed that the MAPbI3 device exhibited an increased fill factor (FF) in the temperature range of 20-64 °C, increasing the power conversion efficiency (PCE). This ensured that the MAPbI3 solar cell performed better in the city and the season with harsher thermal conditions (Kaduna, dry season). Thus, MAPbI3 solar cells can thrive excellently in environments where the operating temperature is below 65 °C. Overall, this study shows that the application of OHP devices in sub-Saharan climatic conditions is empirically possible with the right material modification.

Mixed tin-lead perovskites with balanced crystallization and oxidation barrier for all-perovskite tandem solar cells

Mixed tin-lead perovskite solar cells have driven a lot of passion for research because of their vital role in all-perovskite tandem solar cells, which hold the potential for achieving higher efficiencies compared to single-junction counterparts. However, the pronounced disparity in crystallization processes between tin-based perovskites and lead-based perovskites, coupled with the easy Sn2+ oxidation, has long been a dominant factor contributing to high defect densities. In this study, we propose a multidimensional strategy to achieve efficient tin-lead perovskite solar cells by employing a functional N-(carboxypheny)guanidine hydrochloride molecule. The tailored N-(carboxypheny)guanidine hydrochloride molecule plays a pivotal role in manipulating the crystallization and grain growth of tin-lead perovskites, while also serving as a preservative to effectively inhibit Sn2+ oxidation, owing to the strong binding between N-(carboxypheny)guanidine hydrochloride and tin (II) iodide and the elevated energy barriers for oxidation. Consequently, single-junction tin-lead cells exhibit a stabilized power conversion efficiency of 23.11% and can maintain 97.45% of their initial value even after 3500 h of shelf storage in an inert atmosphere without encapsulation. We further integrate tin-lead perovskites into two-terminal monolithic all-perovskite tandem cells, delivering a certified efficiency of 27.35%.

Breaking the bottleneck of lead-free perovskite solar cells through dimensionality modulation

The emerging perovskite solar cell (PSC) technology has attracted significant attention due to its superior power conversion efficiency (PCE) among the thin-film photovoltaic technologies. However, the toxicity of lead and poor stability of lead halide materials hinder their commercialization. In this case, after a decade of effort, various categories of lead-free perovskites and perovskite-like materials have been developed, including tin halide perovskites, double perovskites, defect-structured perovskites, and rudorffites. However, the performance of the corresponding devices still falls short of expectations, especially their PCE. The limitations mainly originate from either the unstable lattice structure of these materials, which causes the distortion of their octahedra, or their low dimensionality (e.g., structural and electronic dimensionality)-correlated poor carrier transport and self-trapping effect, accelerating nonradiative recombination. Therefore, understanding the relationship between the structures and performance in these emerging candidates and leveraging these insights to design or modify new lead-free perovskites is of great significance. Herein, we review the variety of dimensionalities in different categories of lead-free perovskites and perovskite-like materials and conclude that dimensionality is an important aspect among the crucial indexes that determine the performance of lead-free PSCs. In addition, we summarize the modulation of both structural and electronic dimensionality, and the corresponding enhanced optoelectronic properties in different categories. Finally, perspectives on the future development of lead-free perovskites and perovskite-like materials for photovoltaic applications are provided. We hope that this review will provide researchers with a concise overview of these emerging materials and help them leverage dimensionality to break the bottleneck in photovoltaic applications.

Recent Advances in Wide Bandgap Perovskite Solar Cells: Focus on Lead-Free Materials for Tandem Structures

A tandem solar cell, which is composed of a wide bandgap (WBG) top sub-cell and a narrow bandgap (NBG) bottom subcell, harnesses maximum photons in the wide spectral range, resulting in higher efficiency than single-junction solar cells. WBG (>1.6 eV) perovskites are currently being studied a lot based on lead mixed-halide perovskites, and the power conversion efficiency of lead mixed-halide WBG perovskite solar cells (PSCs) reaches 21.1%. Despite the excellent device performance of lead WBG PSCs, their commercialization is hampered by their Pb toxicity and low stability. Hence, lead-free, less toxic WBG perovskite absorbers are needed for constructing lead-free perovskite tandem solar cells. In this review, various strategies for achieving high-efficiency WBG lead-free PSCs are discussed, drawing inspiration from prior research on WBG lead-based PSCs. The existing issues of WBG perovskites such as VOC loss are discussed, and toxicity issues associated with lead-based perovskites are also addressed. Subsequently, the natures of lead-free WBG perovskites are reviewed, and recently emerged strategies to enhance device performance are proposed. Finally, their applications in lead-free all perovskite tandem solar cells are introduced. This review presents helpful guidelines for eco-friendly and high-efficiency lead-free all perovskite tandem solar cells.

On the Durability of Tin-Containing Perovskite Solar Cells

Tin (Sn)-containing perovskite solar cells (PSCs) have gained significant attention in the field of perovskite optoelectronics due to lower toxicity than their lead-based counterparts and their potential for tandem applications. However, the lack of stability is a major concern that hampers their development. To achieve the long-term stability of Sn-containing PSCs, it is crucial to have a clear and comprehensive understanding of the degradation mechanisms of Sn-containing perovskites and develop mitigation strategies. This review provides a compendious overview of degradation pathways observed in Sn-containing perovskites, attributing to intrinsic factors related to the materials themselves and environmental factors such as light, heat, moisture, oxygen, and their combined effects. The impact of interface and electrode materials on the stability of Sn-containing PSCs is also discussed. Additionally, various strategies to mitigate the instability issue of Sn-containing PSCs are summarized. Lastly, the challenges and prospects for achieving durable Sn-containing PSCs are presented.

Interfacial Molecular Lock Enables Highly Efficient Tin Perovskite Solar Cells

Tin perovskite solar cells (TPSCs) have been facing challenges in power conversion efficiency (PCE) and long-term stability due to the easy oxidation of Sn2+ and the migration of iodine ions, which create populated trap states and cause detrimental recombination of photogenerated carriers. In this work, we design a novel "molecular lock" to suppress the oxidation and iodine migration of tin perovskites by introducing F-type pseudohalide tetrafluoroborate (BF4-) and natural multifunctional antioxidant myricetin (C15H10O8). We find that the incorporation of BF4- releases lattice strain and enhances the structural stability of tin perovskites. Furthermore, it is confirmed that myricetin molecules are anchored on the surface and grain boundaries of perovskite layers via hydrogen bonding interactions, reducing Sn4+ to Sn2+ and stabilizing iodine in tin perovskite octahedrons. The resultant TPSC with a molecular lock based on (MA0.25FA0.75)0.98EDA0.01SnI2.99(BF4)0.01 achieves a high PCE of 14.08%. Moreover, the target device shows negligible change in PCE under 1000 h storage in the dark and retains 89.9% of the initial PCE after continuous irradiation for 200 h.

Inhibition of Sn2+ Oxidation in FASnI3 Perovskite Precursor Solution and Enhanced Stability of Perovskite Solar Cells by Reductive Additive

Tin-based halide perovskite solar cells (Sn-PSCs) have attracted a progressive amount of attention as a potential alternative to lead-based PSCs (Pb-PSCs). Sn-perovskite films are fabricated by a solution process spin-coating technique. However, the efficiency of these devices varies significantly with the different batches of precursor solution due to the poor chemical stability of SnI2-DMSO and the oxidation of Sn2+ to Sn4+. This study investigated the origin of Sn2+ oxidation before film formation, and it was identified that the ionization of SnI2 in dimethyl sulfoxide (DMSO) causes the oxidation of free Sn2+ and I- ions. To address these issues, this study introduces the reductive additive 4-fluorophenylhydrazine hydrochloride (4F-PHCl) in the FASnI3 perovskite precursor solution. The hydrazine functional (-NH-NH2) group converted detrimental Sn4+ and I2 defects back to Sn2+ and I- in precursor solution while retaining the properties of the perovskite solution. Furthermore, the addition of 4F-PHCl in the precursor solution effectively slows the crystallization process, enhancing the crystallinity of FASnI3 perovskite films and guaranteeing the Sn2+/I- stoichiometric ratio, ultimately leading to a power conversion efficiency (PCE) of 10.86%. The hydrophobic fluorinated benzene ring in 4F-PHCl ensures moisture stability in perovskite films, allowing unencapsulated PSCs to retain over 92% of their initial PCE in an N2-filled glovebox for 130 days. Moreover, the 4F-PHCl-modified encapsulated PSCs showed superior operational stability for 420 h and maintained 95% of their initial PCE for 300 h under maximum power point tracking at 1 sun continuous illumination. This study's findings provide a promising pathway to create a controlled Sn-based perovskite precursor solution for highly reproducible and stable Pb-free Sn-PSCs.

Component Distribution Regulation in Sn-Pb Perovskite Solar Cells through Selective Molecular Interaction

Tin-lead (Sn-Pb) perovskite solar cells (PSCs) with near-ideal bandgap still lag behind the pure lead PSCs. Disordered heterojunctions caused by inhomogeneous Sn/Pb ratio in the binary perovskite film induce large recombination loss. Here, an Sn-Pb perovskite film is reported with homogeneous component and energy distribution by introducing hydrazine sulfate (HS) in Sn perovskite precursor. HS can form hydrogen bond network and coordinate with FASnI3 thus no longer bond with Pb2+ , which reduces the crystallization rate of tin perovskite to the level of lead analog. The strong bonding between SO4 2- and Sn2+ can also suppress its oxidation. As a result, the Sn-Pb PSCs with HS exhibit a significantly improved VOC of 0.91 V along with a high efficiency of 23.17%. Meanwhile, the hydrogen bond interaction network, strong bonding between Sn2+ and sulfate ion also improve the thermal, storage, and air stability of resulting devices.

Advances on the Application of Wide Band-Gap Insulating Materials in Perovskite Solar Cells

In recent years, the development of perovskite solar cells (PSCs) is advancing rapidly with their recorded photoelectric conversion efficiency reaching 25.8%. However, for the commercialization of PSCs, it is also necessary to solve their stability issue. In order to improve the device performance, various additives and interface modification strategies have been proposed. While, in many cases, they can guarantee a significant increase in efficiency, but not ensure improved stability. Therefore, materials that improve the device efficiency and stability simultaneously are urgently needed. Some wide band-gap insulating materials with stable physical and chemical properties are promising alternative materials. In this review, the application of wide band-gap insulating materials in PSCs, including their preparation methods, working roles, and mechanisms are described, which will promote the commercial application of PSCs.

Highly Efficient HTM-Free Tin Perovskite Solar Cells with Outstanding Stability Exceeding 10000 h

The bottleneck in the rapid development of tin-based perovskite solar cells (TPSCs) is the inherent chemical instability. Although this is being addressed continuously, the device performance has not improved further due to the use of PEDOT:PSS as the hole-transport material (HTM), which has poor long-term stability. Herein we have applied commercial ITO nanoparticles over ITO glass substrates and altered the surface chemistry of the ITO electrode via a simple two-step thermal annealing, followed by a UV-ozone treatment. These surface-modified ITO electrodes display promising interfacial characteristics, such as a suitable band alignment owing to significantly reduced surface carbon contamination, increased In-O bonding, and reduced oxygen vacancies, that enabled fabrication of an HTM-free TPSC device according to a two-step method. The fabricated device possessed an outstanding power conversion efficiency (PCE) of 9.7%, along with a superior long-term stability by retaining over 90% of the initial PCE upon shelf storage in a glovebox for a period of over 10000 h. The application of ITO nanoparticles led to effective interfacial passivation, whose impacts on the long-term durability were assessed using electrochemical impedance spectroscopy, time-resolved photoluminescence decay profiles, and femtosecond transient absorption spectroscopy techniques.

Achieving above 24% efficiency with non-toxic CsSnI3 perovskite solar cells by harnessing the potential of the absorber and charge transport layers

Lead toxicity is a barrier to the widespread commercial manufacture of lead halide perovskites and their use in solar photovoltaic (PV) devices. Eco-friendly lead-free perovskite solar cells (PSCs) have been developed using certain unique non- or low-toxic perovskite materials. In this context, Sn-based perovskites have been identified as promising substitutes for Pb-based perovskites due to their similar characteristics. However, Sn-based perovskites suffer from chemical instability, which affects their performance in PSCs. This study employs theoretical simulations to identify ways to improve the efficiency of Sn-based PSCs. The simulations were conducted using the SCAPS-1D software, and a lead-free, non-toxic, and inorganic perovskite absorber layer (PAL), i.e. CsSnI3 was used in the PSC design. The properties of the hole transport layer (HTL) and electron transport layer (ETL) were tuned to optimize the performance of the device. Apart from this, seven different combinations of HTLs were studied, and the best-performing combination was found to be ITO/PCBM/CsSnI3/CFTS/Se, which achieved a power conversion efficiency (PCE) of 24.73%, an open-circuit voltage (VOC) of 0.872 V, a short-circuit current density (JSC) of 33.99 mA cm-2 and a fill factor (FF) of 83.46%. The second highest PCE of 18.41% was achieved by the ITO/PCBM/CsSnI3/CuSCN/Se structure. In addition to optimizing the structure of the PSC, this study also analyzes the current density-voltage (J-V) along with quantum efficiency (QE), as well as the impact of series resistance, shunt resistance, and working temperature, on PV performance. The results demonstrate the potential of the optimized structure identified in this study to enhance the standard PCE of PSCs. Overall, this study provides important insights into the development of lead-free absorber materials and highlights the potential of using CsSnI3 as the PAL in PSCs. The optimized structure identified in this study can be used as a base for further research to improve the efficiency of Sn-based PSCs.

Significantly Improved Efficiency and Stability of Pure Tin-Based Perovskite Solar Cells with Bifunctional Molecules

Tin-based perovskite solar cells (TPSCs) have become one of the most prospective photovoltaic materials due to their remarkable optoelectronic properties and relatively low toxicity. Nevertheless, the rapid crystallization of perovskites and the easy oxidization of Sn²⁺ to Sn⁴⁺ make it challenging to fabricate efficient TPSCs. In this work, a piperazine iodide (PI) material with -NH- and -NH₂⁺- bifunctional groups is synthesized and introduced into the PEA_0.1FA_0.9SnI₃-based precursor solution to tune the microstructure, charge transport, and stability of TPSCs. Compared with piperazine (PZ) containing only the -NH- group, the PI additive displays better effects on regulating the microstructure and crystallization, inhibiting Sn²⁺ oxidation and reducing trap states, resulting in an optimal efficiency of 10.33%. This is substantially better than that of the reference device (6.42%). Benefiting from the fact that PI containing -NH- and -NH₂⁺- groups can passivate both positively charged defects and negatively charged halogen defects, unencapsulated TPSCs modified with the PI material can maintain about 90% of their original efficiency after being kept in a N₂ atmosphere for 1000 h, much higher than the value of 47% in reference TPSCs without additives. This work provides a practical method to prepare efficient and stable pure TPSCs.

Ligand Engineering in Tin-Based Perovskite Solar Cells

Perovskite solar cells (PSCs) have attracted aggressive attention in the photovoltaic field in light of the rapid increasing power conversion efficiency. However, their large-scale application and commercialization are limited by the toxicity issue of lead (Pb). Among all the lead-free perovskites, tin (Sn)-based perovskites have shown potential due to their low toxicity, ideal bandgap structure, high carrier mobility, and long hot carrier lifetime. Great progress of Sn-based PSCs has been realized in recent years, and the certified efficiency has now reached over 14%. Nevertheless, this record still falls far behind the theoretical calculations. This is likely due to the uncontrolled nucleation states and pronounced Sn (IV) vacancies. With insights into the methodologies resolving both issues, ligand engineering-assisted perovskite film fabrication dictates the state-of-the-art Sn-based PSCs. Herein, we summarize the role of ligand engineering during each state of film fabrication, ranging from the starting precursors to the ending fabricated bulks. The incorporation of ligands to suppress Sn2+ oxidation, passivate bulk defects, optimize crystal orientation, and improve stability is discussed, respectively. Finally, the remained challenges and perspectives toward advancing the performance of Sn-based PSCs are presented. We expect this review can draw a clear roadmap to facilitate Sn-based PSCs via ligand engineering.

Targeted passivation and optimized interfacial carrier dynamics improving the efficiency and stability of hole transport layer-free narrow-bandgap perovskite solar cells

Narrow-bandgap mixed Sn-Pb perovskite solar cells (PSCs) have showcased great potential to approach the Shockley-Queisser limit. Nevertheless, the practical application and long-term deployment of mixed Sn-Pb PSCs are still largely impeded by the rapid oxidation of Sn²⁺ ions and under-optimized carrier transport layer (CTL)/perovskite interfaces that would inevitably incur serious interfacial charge recombination and device performance degradation. Herein, we successfully removed the hole transport layer (HTL) by incorporating a small amount of organic phosphonic acid molecules into perovskites, which could preferably interact with Sn²⁺ ions (relative to Pb²⁺ analogues) at the grain boundaries (GBs) throughout the perovskite film thickness via coordination bonding, thus effectively retarding the oxidation of Sn²⁺, passivating the defects and suppressing the non-radiative recombination. Targeted modification effectively reinforced built-in potential by ∼100 mV, and favorably induced energy level cascade, thus accelerating spatial charge separation and facilitating the hole extraction from perovskite layer to underlying conductive electrodes even in the absence of HTL. Consequently, enhanced power conversion efficiencies up to 20.21% have been achieved, which is the record efficiency for the HTL-free mixed Sn-Pb PSCs, accompanied by a decent photovoltage of 0.87 V and improved long-term stability over 2400 h.

Bidirectional Anions Gathering Strategy Afford Efficient Mixed PbSn Perovskite Solar Cells

Mixed lead-tin (PbSn) perovskite solar cells (PSCs) possess low toxicity and adjustable bandgap for both single-junction and all-perovskite tandem solar cells. However, the performance of mixed PbSn PSCs still lags behind the theoretical efficiency. The uncontrollable crystallization and the resulting structural defect are important reasons. Here, the bidirectional anions gathering strategy (BAG) is reported by using Methylammonium acetate (MAAc) and Methylammonium thiocyanate (MASCN) as perovskite bulk additives, which Ac^- escapes from the perovskite film top surface while SCN^- gathers at the perovskite film bottom in the crystallization process. After the optoelectronic techniques, the bidirectional anions movement caused by the top-down gradient crystallization is demonstrated. The layer-by-layer crystallization can collect anions in the next layer and gather at the broader, enabling a controllable crystallization process, thus getting a high-quality perovskite film with better phase crystallinity and lower defect concentration. As a result, PSCs treated by the BAG strategy exhibit outstanding photovoltaic and electroluminescent performance with a champion efficiency of 22.14%. Additionally, it demonstrates excellent long-term stability, which retains ≈92.8% of its initial efficiency after 4000 h aging test in the N₂ glove box.

Sn-Based Perovskite Solar Cells towards High Stability and Performance

Recent years have witnessed rapid development in the field of tin-based perovskite solar cells (TPSCs) due to their environmental friendliness and tremendous potential in the photovoltaic field. Most of the high-performance PSCs are based on lead as the light-absorber material. However, the toxicity of lead and the commercialization raise concerns about potential health and environmental hazards. TPSCs can maintain all the optoelectronic properties of lead PSCs, as well as feature a favorable smaller bandgap. However, TPSCs tend to undergo rapid oxidation, crystallization, and charge recombination, which make it difficult to unlock the full potential of such perovskites. Here, we shed light on the most critical features and mechanisms affecting the growth, oxidation, crystallization, morphology, energy levels, stability, and performance of TPSCs. We also investigate the recent strategies, such as interfaces and bulk additives, built-in electric field, and alternative charge transport materials that are used to enhance the performance of the TPSCs. More importantly, we have summarized most of the recent best-performing lead-free and lead-mixed TPSCs. This review aims to help future research in TPSCs to produce highly stable and efficient solar cells.

Rational design of formamidine tin-based perovskite solar cell with 30% potential efficiency via 1-D device simulation

As a promising photovoltaic technology, halide perovskite solar cells (PSCs) have recently attracted wide attention. This work presents a systematic simulation of low bandgap formamidinium tin iodide (FASnI₃)-based p-n heterojunction PSCs to investigate the effects of multiple optoelectronic variations on the photovoltaic performance. The structures of the simulated devices are n-i-p, electron transport layer-free (ETL-free), hole transport layer-free (HTL-free), and inverted HTL-free. The simulation is conducted with the Solar Cell Capacitance Simulator (SCAPS-1D). The power conversion efficiencies (PCEs) dramatically decrease when the acceptor doping density (N_A) of the absorber layer exceeds 10¹⁶ cm^-3. For all devices, the photovoltaic parameters dramatically decrease when the absorber defect density (N_t) is over 10¹⁵ cm^-3, and the best absorber layer thickness is 1000 nm. It should be pointed out that the N_t and the interface defect layer (IDL) are the primary culprits that seriously affect the device performance. When the interfacial defect density (N_it) exceeds 10¹² cm^-3, PCEs begin to decline significantly. Therefore, paying attention to these defect layers is necessary to improve the PCE. Furthermore, the proper conduction band offset (CBO) between the electron transport layer (ETL) and absorber layer positively affects PSCs' performance. These simulation results help fabricate highly efficient and environment-friendly narrow bandgap PSCs.

Regulating the Interplay at the Buried Interface for Efficient and Stable Carbon-Based CsPbI2Br Perovskite Solar Cells

Buried interface modification is promising for preparing high-performance perovskite solar cells (PSCs) by improving the film quality and adjusting the interfacial energy level alignment. In this work, multifunctional ethylenediaminetetraacetic acid diammonium (EAD)-modulated ZnO is employed as an effective buried interface to regulate the interplay between SnO₂ and CsPbI₂Br in carbon-based inorganic PSCs (C-IPSCs). The burying of EAD into the ZnO interlayer not only enhances the photoelectric properties of ZnO by passivating oxygen defects but also adjusts the energy level alignment of the buried interface. More importantly, the perovskite quality is optimized and the buried interface defects are passivated due to the formation of coordination and hydrogen bondings. Benefiting from such a robust and efficient charge transfer configuration, a maximum power conversion efficiency of 14.58% is achieved in the optimized device, which represents the highest performance reported among those of low-temperature CsPbI₂Br C-IPSCs. In addition, the unencapsulated device demonstrates better long-term and thermal stability.

Overcoming C60-induced interfacial recombination in inverted perovskite solar cells by electron-transporting carborane

Inverted perovskite solar cells still suffer from significant non-radiative recombination losses at the perovskite surface and across the perovskite/C₆₀ interface, limiting the future development of perovskite-based single- and multi-junction photovoltaics. Therefore, more effective inter- or transport layers are urgently required. To tackle these recombination losses, we introduce ortho-carborane as an interlayer material that has a spherical molecular structure and a three-dimensional aromaticity. Based on a variety of experimental techniques, we show that ortho-carborane decorated with phenylamino groups effectively passivates the perovskite surface and essentially eliminates the non-radiative recombination loss across the perovskite/C₆₀ interface with high thermal stability. We further demonstrate the potential of carborane as an electron transport material, facilitating electron extraction while blocking holes from the interface. The resulting inverted perovskite solar cells deliver a power conversion efficiency of over 23% with a low non-radiative voltage loss of 110 mV, and retain >97% of the initial efficiency after 400 h of maximum power point tracking. Overall, the designed carborane based interlayer simultaneously enables passivation, electron-transport and hole-blocking and paves the way toward more efficient and stable perovskite solar cells.

Regulating the phase distribution of quasi-2D perovskites using a three-dimensional cyclic molecule toward improved light-emitting performance

In this study, a molecule with a three-dimensional (3D) cyclic structure, a cryptand, is demonstrated as an effective additive for the quasi-two-dimensional (quasi-2D) PEA₂Cs_n-1Pb_nBr_3n+1 (n = 3, herein) to improve its light-emitting performance. The cryptand can effectively regulate the phase distribution of the quasi-2D perovskite through its intense interaction with PbBr₂, benefitting from its cage-like structure that can better capture the Pb²⁺ ions. Due to the inhibited growth of the low-n phases, a much-concentrated phase distribution is achieved for the cryptand-containing films. Moreover, its constituent O/N atoms can passivate the uncoordinated Pb²⁺ ions to improve the film quality. Such a synergistic effect thereby facilitates the charge/energy transfer among the multiple phases and reduces the non-radiative recombination. As a result, the quasi-2D perovskite light-emitting diode (PeLED) with the optimized cryptand doping ratio is shown to deliver the highest luminance (L_max) of 15 532 cd m^-2 with a highest external quantum efficiency (EQE) of 4.02%. Compared to the pristine device, L_max is enhanced by ∼5 times and EQE is enhanced by ∼10 times.

Recent Advancements in Tin Halide Perovskite-Based Solar Cells and Thermoelectric Devices

The excellent optoelectronic properties of tin halide perovskites (Sn-PVKs) have made them a promising candidate for replacing toxic Pb counterparts. Concurrently, their enormous potential in photon harvesting and thermoelectricity applications has attracted increasing attention. The optoelectronic properties of Sn-PVKs are governed by the flexible nature of SnI₆ octahedra, and they exhibit extremely low thermal conductivity. Due to these diverse applications, this review first analyzes the structural properties, optoelectronic properties, defect physics, and thermoelectric properties of Sn-PVKs. Then, recent techniques developed to solve limitations with Sn-PVK-based devices to improve their photoelectric and thermoelectric performance are discussed in detail. Finally, the challenges and prospects for further development of Sn-PVK-based devices are discussed.

Sn-Based Perovskite Halides for Electronic Devices

Because of its less toxicity and electronic structure analogous to that of lead, tin halide perovskite (THP) is currently one of the most favorable candidates as an active layer for optoelectronic and electric devices such as solar cells, photodiodes, and field-effect transistors (FETs). Promising photovoltaics and FETs performances have been recently demonstrated because of their desirable electrical and optical properties. Nevertheless, THP's easy oxidation from Sn²⁺ to Sn⁴⁺ , easy formation of tin vacancy, uncontrollable film morphology and crystallinity, and interface instability severely impede its widespread application. This review paper aims to provide a basic understanding of THP as a semiconductor by highlighting the physical structure, energy band structure, electrical properties, and doping mechanisms. Additionally, the key chemical instability issues of THPs are discussed, which are identified as the potential bottleneck for further device development. Based on the understanding of the THPs properties, the key recent progress of THP-based solar cells and FETs is briefly discussed. To conclude, current challenges and perspective opportunities are highlighted.

Dually Modified Wide-Bandgap Perovskites by Phenylethylammonium Acetate toward Highly Efficient Solar Cells with Low Photovoltage Loss

Wide-bandgap perovskites as a class of promising top-cell materials have shown great promise in constructing efficient perovskite-based tandem solar cells, but their intrinsic relatively low radiative efficiency results in a large open-circuit voltage (V_OC) deficit and thereby limits the whole device performance. Reducing film flaws or optimizing interfacial energy level alignments in wide-bandgap perovskite devices can efficiently inhibit nonradiative recombination to boost device V_OC and efficiency. However, the simultaneous regulation on both sides and their underlying mechanism are less explored. Herein, a bifunctional modification approach is proposed to optimize the wide-bandgap perovskite surface with an ultrathin layer of phenylethylammonium acetate (PEAAc) to synchronously decrease the surface imperfection and mitigate the interfacial energy barrier. This treatment effectively heals under-coordinated surface defects through the formation of chemical interaction between the perovskite and PEAAc, bringing about a much slower charge trapping process and dramatically decreasing nonradiative recombination losses. Meanwhile, the passivation-induced upshifted Fermi level of the perovskite contributes to accelerated electron extraction and larger Fermi-level splitting under illumination. Consequently, the PEAAc-modified wide-bandgap (1.68 eV) device achieves an optimal efficiency of 20.66% with a high V_OC of 1.25 V, among the highest reported V_OC values for wide-bandgap perovskite devices, enormously outperforming that (18.86% and 1.18 V) of the device without passivation. In addition, the radiative limit of V_OC for both cells is determined to be 1.42 V, delivering nonradiative recombination losses of 0.24 and 0.17 V for the control and PEAAc-modified devices, respectively. These results highlight the significance of the bifunctional modification strategy in achieving high-performance wide-bandgap perovskite devices.

Defect Passivation Effect of Chemical Groups on Perovskite Solar Cells

Defect passivation is a key strategy to prepare high-performance perovskite solar cells (PVSCs). Even though abundant passivation molecules have been applied, the absence of detailed researches with regard to different functional groups in polymer additives may inevitably impede the establishment of passivation molecules selection rules. In this work, three passivation molecules including poly(vinyl alcohol) (PVA), polymethyl acrylate (PMA), and poly(acrylic acid) (PAA) are employed to systematically analyze the passivation effect from hydroxyl, carbonyl, and carboxyl groups. In general, PVA (-OH) can form hydrogen bonds with perovskite and PMA (-C═O) can complex with uncoordinated Pb²⁺. Specifically, PAA (-COOH) can interact selectively with MA⁺ and I^- ions via hydrogen bonding and complex with uncoordinated Pb²⁺ to passivate defects more effectively. Hence, the PAA-incorporated PVSCs based on MAPbI₃ achieve the champion power conversion efficiency (PCE) of 20.29% with open-circuit voltage up to 1.13 V. In addition, PAA cross-linking perovskite grains can relieve mechanical stress, as well as occupy the major channels to suppress ion migration and water/oxygen erosion. The corresponding unencapsulated devices demonstrate a superior light soaking stability, retaining more than 80% of the original PCE under one sun illumination for 1000 h.

Narrowband Near-Infrared Photodetectors Based on Perovskite Waveguide Devices

Organic-inorganic perovskites have attracted great interest for developing wavelength-selective photodetectors. Currently, the spectral response range of narrowband photodetectors is mainly concentrated within the visible light region, lacking near-infrared photodetectors. Here, we present perovskite narrowband near-infrared photodetectors achieved by transverse propagation of light in perovskite waveguide devices for the first time. The response spectra of photodetectors are continuously tuned from 750 to 1000 nm by changing the perovskite component and the position of the incident light with the full width at half-maximum of 25-80 nm. The theoretical and experimental results reveal that the typical perovskite photodetectors serve as an optical waveguide to confine and propagate the light, in which the long wavelength light propagates a longer distance; oppositely, the short wavelength light with the higher loss in devices fails to produce a photoresponse, owing to the wavelength dependent absorption of perovskite. This provides a new concept for designing narrowband photodetectors and will simulate new applications.

Basic Amino Acids Modulated Neutral-pH PEDOT:PSS for Stable Blue Perovskite Light-Emitting Diodes

State-of-the-art external quantum efficiencies (EQEs) have exceeded 20% for near-infrared, red, and green perovskite light-emitting diodes (PeLEDs) so far. Nevertheless, the cutting-edge blue counterparts demonstrate an inferior device performance, which impedes the commercialization and industrialization of PeLEDs in ultrahigh-definition displays. As the most popular hole transport layer, poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) bears the acidic and hygroscopic drawbacks, which deteriorates the device efficiency and long-term stability of blue PeLEDs. In this work, the basic amino acids with zwitterionic characteristics are proposed to modulate the pH of PEDOT:PSS, which are arginine, lysine, and histidine. It is found that they play a triple function to the blue perovskite films: modulating the acidity of PEDOT:PSS, controlling the crystalline process, and passivating the defects at the PEDOT:PSS/perovskite interface. As a result, the utilization of neutral PEDOT:PSS leads to a significant enhancement in stability and photoluminescence quantum yield. Eventually, the pure-blue PeLEDs achieve a record EQE of 5.6% with the emission peak at 467 nm. This research proves that the interfacial engineering of hole transport layers is a reliable strategy to enhance the device efficiency and operation stability of blue PeLEDs.

Inhibition of PbI2-induced defects by doping MABr for high-performance perovskite solar cells

The performance of FAPbI₃-based perovskite solar cells (PSCs) has been drastically improved with a photoelectric conversion efficiency (PCE) of 25.7%, showing attractive application potential. To achieve higher efficiency and longer-term stability of PSCs, a large number of passivation methods are used to inhibit Pb and I defects of FAPbI₃ films. In this study, we developed a facile method to suppress the residual PbI₂ of perovskite films and the related defects efficiently by a two-step spin-coating process, which prominently improves the carrier lifetime of α-FAPbI₃ films (from 459 ns to 1346 ns). In addition, the morphology and crystallization characteristics of the films were also significantly improved, and the grains grew up to 1 μm. The efficiency of FAPbI₃-based PSCs fabricated by this method reached 22.64%.

Resistance-switchable conjugated polyrotaxane for flexible high-performance RRAMs

A representative closely packed conjugated polyrotaxane (CPR1) is synthesized by threading polyaniline (PAN) into β-cyclodextrin (CD) macrocycles and utilized for the first time to construct an RRAM device that exhibits an outstanding resistive switching capability. The CPR1 RRAM device displays remarkable nonvolatile memory performance with an extremely high ON/OFF ratio of 10⁸, the ultra-fast response of 29 ns, excellent reliability and reproducibility, and long-term stability (more than 1 year). The mechanism underlying this resistive switching behavior is understood according to the electric-field-induced proton doping of the PAN core by the CD sheath through hydrogen bonding interactions. More impressively, the favorable solubility and intrinsic flexibility of CPR1 allow for large-scale fabrication of flexible CPR1 RRAM device arrays by full-printing technology with endurance of 1000 bending cycles at the minimum bending radius of 3 mm, higher ON/OFF ratio of 10⁸, and relatively lower operating voltage of 1.8 V. This work shows the potential of CPR materials in highly stable memory devices for next-generation flexible and wearable electronics.

Ion Migration in Organic-Inorganic Hybrid Perovskite Solar Cells: Current Understanding and Perspectives

Organic-inorganic hybrid perovskite (OIHPs) solar cells are the most promising alternatives to traditional silicon solar cells, with a certified power conversion efficiency beyond 25%. However, the poor stability of OHIPs is one of the thorniest obstacles that hinder its commercial development. Among all the factors affecting stability, ion migration is prominent because it is unavoidable and intrinsic in OHIPs. Therefore, it is important to understand the mechanism for ion migration and regulation strategies. Herein, the types of ions that may migrate in OHIPs are first discussed; afterward, the migrating channels are demonstrated. The effects of ion migration are further elaborated. While ion migration can facilitate the p-i-n structure in some cases, the current hysteresis and other adverse effects such as phase segregation in OHIPs attract widespread attention. Based on these, several recent strategies to suppress the ion migration are enumerated, including the introduction of alkali cations, organic additives, grain boundaries passivation, and employment of low-dimensional perovskites. Finally, the prospect for further modulating the ion migration and more stable perovskite solar cells is proposed.

High-Performance Tin-Lead Mixed-Perovskite Solar Cells with Vertical Compositional Gradient

Sn-Pb mixed perovskites with bandgaps in the range of 1.1-1.4 eV are ideal candidates for single-junction solar cells to approach the Shockley-Queisser limit. However, the efficiency and stability of Sn-Pb mixed-perovskite solar cells (PSCs) still lag far behind those of Pb-based counterparts due to the easy oxidation of Sn²⁺ . Here, a reducing agent 4-hydrazinobenzoic acid is introduced as an additive along with SnF₂ to suppress the oxidation of Sn²⁺ . Meanwhile, a vertical Pb/Sn compositional gradient is formed spontaneously after an antisolvent treatment due to different solubility and crystallization kinetics of Sn- and Pb-based perovskites and it can be finely tuned by controlling the antisolvent temperature. Because the band structure of a perovskite is dependent on its composition, graded vertical heterojunctions are constructed in the perovskite films with a compositional gradient, which can enhance photocarrier separation and suppress carrier recombination in the resultant PSCs. Under optimal fabrication conditions, the Sn-Pb mixed PSCs show power conversion efficiency up to 22% along with excellent stability during light soaking.

Dual Functions of Performance Improvement and Lead Leakage Mitigation of Perovskite Solar Cells Enabled by Phenylbenzimidazole Sulfonic Acid

With the continuous improvement of performance of lead-based perovskite solar cells (PSCs), the potential harm of water-soluble lead ion (Pb²⁺ ) to environment and public health is emerging as a major obstacle to their commercialization. Herein, an amphoteric phenylbenzimidazole sulfonic acid (PBSA) that is almost insoluble in water is added to the perovskite precursor to simultaneously regulate crystallization growth, passivate defects, and mitigate lead leakage of high-performance PSCs. Through systematic research, it is found that PBSA can not only regulate the crystallization of perovskite grains to form the film, but also passivate the defects of annealed films mainly due to the strong interaction between the functional groups in PBSA and Pb²⁺ , which greatly improves the crystallinity and stability of perovskite films. Consequently, the highest power conversion efficiency of 23.27% is achieved in 0.09 cm² devices and 15.31% is obtained for large-area modules with an aperture area of 19.32 cm² , along with negligible hysteresis and improved stability. Moreover, the leakage of lead ions from unpackaged devices is effectively prevented owing to the strong coupling between PBSA molecules and water-soluble Pb²⁺ to form insoluble complexes in water, which is of great significance to promote the application of optoelectronic devices based on lead-based perovskite materials.

Regulating crystallization dynamics and crystal orientation of methylammonium tin iodide enables high-efficiency lead-free perovskite solar cells

Tin (Sn)-based perovskite solar cells (PSCs) have attracted much attention because they are more environmentally friendly than lead-based PSCs. However, the fast crystallization of Sn-based perovskite films and the easy oxidation of Sn²⁺ to Sn⁴⁺ hinder the improvement of their efficiency and stability. In this work, ethylammonium bromide (EABr) was added to methylammonium tin iodide (MASnI₃) perovskite precursor solution to regulate the crystallization dynamics and improve the film morphology. The results show that the large EA⁺ ions slow down the crystallization process of Sn-based perovskites and form a smooth perovskite film with high crystallinity, while the added Br^- anions further improved the crystallinity and orientation of the perovskite film. Under the combined action of EA⁺ and Br^- ions, the as-produced PSCs achieved a champion power conversion efficiency (PCE) of 9.59%. The EABr additive also retarded the oxidation of Sn²⁺, and the solar cell device maintained 93% of its initial efficiency after 30 days in a nitrogen-filled glove box without being encapsulated. This work provides a new strategy for the realization of high-efficiency Sn-based PSCs.

Two-Step Crystallization for Low-Oxidation Tin-Based Perovskite Light-Emitting Diodes

Metal halide perovskites attract significant attention because of their excellent optoelectronic and semiconducting properties. However, there are environmental concerns related to the toxicity of the lead metal that is mainly used in these perovskites. PEA2SnI4 perovskite is a potential candidate for lead-free perovskites because of its pure red emission. Although, undesired Sn4+ oxidation results in the deterioration of PEA2SnI4 perovskite. We demonstrate the two-step crystallization of PEA2SnI4 through the (i) reprecipitation and (ii) recrystallization processes. A film prepared using this method exhibits narrowed emission, with a full width at half-maximum from 30.0 to 26.1 nm, because of its homogeneous emission. Moreover, the Sn4+ content of two-step-crystallized PEA2SnI4 films is five times lower than that of a control film. Diffusion-ordered spectroscopy analysis indicates that the two-step precursor exhibits a smaller hydrodynamic radius crystal seed, which enhances crystallization during spin coating. The resulting two-step crystallized PEA2SnI4-based light-emitting diode (LED) exhibits a maximum external quantum efficiency (EQE) of 0.4% with an average of 0.2%, which is two times greater than that of the control device. This two-step approach may be generalized to synthesize other lead-free materials.

Tin Halide Perovskites: From Fundamental Properties to Solar Cells

Metal halide perovskites have unique optical and electrical properties, which make them an excellent class of materials for a broad spectrum of optoelectronic applications. However, it is with photovoltaic devices that this class of materials has reached the apotheosis of popularity. High power conversion efficiencies are achieved with lead-based compounds, which are toxic to the environment. Tin-based perovskites are the most promising alternative because of their bandgap close to the optimal value for photovoltaic applications, the strong optical absorption, and good charge carrier mobilities. Nevertheless, the low defect tolerance, the fast crystallization, and the oxidative instability of tin halide perovskites currently limit their efficiency. The aim of this review is to give a detailed overview of the crystallographic, photophysical, and optoelectronic properties of tin-based perovskite compounds in their multiple forms from 3D to low-dimensional structures. At the end, recent progress in tin-based perovskite solar cells are reviewed, mainly focusing on the detail of the strategies adopted to improve the device performances. For each subtopic, the current challenges and the outlook are discussed, with the aim to stimulate the community to address the most important issues in a concerted manner.

Multifunctional Chemical Linker in Buried Interface for Stable and Efficient Planar Perovskite Solar Cells

The buried interface between perovskite light absorbing layer (PVK) and electron transport layer (ETL) plays an utmost important role for further improving the efficiency and stability of planar perovskite solar...

Highly oriented quasi-2D layered tin halide perovskites with 2-thiopheneethylammonium iodide for efficient and stable tin perovskite solar cells

The addition of TEAI can induce oriented growth of perovskite films and enhance the efficiency with high stability.

In Situ Interfacial Passivation of Sn-Based Perovskite Films with a Bi-functional Ionic Salt for Enhanced Photovoltaic Performance

Environment-friendly Tin (Sn)-based perovskite solar cells (PSCs) have lately made significant development, showing tremendous promise in addressing the hazardous problems associated with Pb-based PSCs. However, even in N₂ atmospheres, the thermodynamic stability of Sn-based perovskite films and long-term stability of Sn-based PSCs are demonstrated to be poor due to the presence of interfacial defect trap states. Here, we demonstrate the post-treatment of Sn-based perovskite films with ethylenediamine formate (EDAFa₂) ion salt, serving as a bi-functional interface layer to in situ passivate the interfacial defect and improve the stability of Sn²⁺ by creating a thermodynamic chemical environment pathway. Moreover, the presence of EDAFa₂ is shown to promote the interfacial energy level alignment, which is beneficial for the charge extraction at the interface. As a result, PSC devices with a bi-functional interface achieve a champion power conversion efficiency (PCE) as high as 9.40% and enhanced stability, retaining ∼95% of the original PCE stored in a N₂ environment after ∼1960 h without encapsulation. This work highlights the significant role of an interfacial design in efficient and stable Sn-based PSCs.

Defect Passivation for Perovskite Solar Cells: from Molecule Design to Device Performance

Perovskite solar cells (PSCs) are a promising third-generation photovoltaic (PV) technology developed rapidly in recent years. Further improvement of their power conversion efficiency is focusing on reducing the non-radiative charge recombination induced by the defects in metal halide perovskites. So far, defect passivation by the organic small molecule has been considered as a promising approach for boosting the PSC performance owing to their large structure flexibility adapting to passivating variable kinds of defect states and perovskite compositions. Here, the recent progress of defect passivation toward efficient and stable PSCs was reviewed from the viewpoint of molecular structure design and device performance. To comprehensively reveal the structure-performance correlation of passivation molecules, it was separately discussed how the functional groups, organic frameworks, and side chains affect the corresponding PV parameters of PSCs. Finally, a guideline was provided for researchers to select more suitable passivation agents, and a perspective was given on future trends in development of passivation strategies.

Interfacial "Anchoring Effect" Enables Efficient Large-Area Sky-Blue Perovskite Light-Emitting Diodes

While tremendous progress has recently been made in perovskite light-emitting diodes (PeLEDs), large-area blue devices feature inferior performance due to uneven morphologies and vast defects in the solution-processed perovskite films. To alleviate these issues, a facile and reliable interface engineering scheme is reported for manipulating the crystallization of perovskite films enabled by a multifunctional molecule 2-amino-1,3-propanediol (APDO)-triggered "anchoring effect" at the grain-growth interface. Sky-blue perovskite films with large-area uniformity and low trap states are obtained, showing the distinctly improved radiative recombination and hole-transport capability. Based on the APDO-induced interface engineering, synergistical boost in device performance is achieved for large-area sky-blue PeLED (measuring at 100 mm2 ) with a peak external quantum efficiency (EQE) of 9.2% and a highly prolonged operational lifetime. A decent EQE up to 6.1% is demonstrated for the largest sky-blue device emitting at 400 mm2 .

FA/MA Cation Exchange for Efficient and Reproducible Tin-Based Perovskite Solar Cells

Nontoxic tin-based perovskite solar cells (Sn-PSCs) as a promising alternative to toxic Pb-PSCs have drawn great attention in recent years for their environmental friendliness and unique optoelectronic properties. However, both the efficiency and long-term stability of Sn-PSCs are considerably inferior to those of Pb-based ones. One of the main reasons is the difficulty in obtaining high-quality Sn-perovskite films due to the rapid crystallization of Sn-perovskites, which also results in poor device reproducibility. Here, we report a novel cation exchange strategy to prepare high-quality formamidinium tin triiodide (FASnI₃) perovskite films with a better controlled crystallization process and improved reproducibility, which allows easy access to smooth and pinhole-free perovskite films with oriented crystal growth, enlarged grain size, and reduced trap-state density. The corresponding Sn-PSCs show excellent photovoltaic performance with a champion efficiency of 9.11%, comparable to the best results reported for FASnI₃-PSCs, and the devices also demonstrate outstanding long-term stability without encapsulation. Our results offer a practical strategy for fabricating Sn-PSCs with superb performance and stability.