Autologous Cobalt Phosphates with Modulated Coordination Sites for Electrocatalytic Water Oxidation

Engineering Co2+ Coordination in α-Co(OH)2 and its Conversion to Co3O4 Nanoparticles for Application in Asymmetric Supercapacitors

Owing to their unique redox behaviour and structural versatility, cobalt hydroxide/cobalt oxide-based nanomaterials have emerged as promising materials for energy storage. However, the interrelation between coordination environment of Co2+ and its effect on their electrochemical behaviour remains unexplored. α-Co(OH)₂ contains Co2+ in octahedral coordination (Co2+ Oh). However, careful engineering of Co2+ coordination to tetrahedral (Co2+ Td) can significantly affect the supercapacitive performance. Herein, a simple homogeneous precipitation method is used to achieve this transformation. At low concentration of Co salt (5 mmol), pink-coloured α-Co(OH)₂ nanoflakes (Co(OH)₂-PP) are formed with only Co2+ Oh, whereas at higher concentration of cobalt salt (50 mmol), blue colored α-Co(OH)₂ nanorods (Co(OH)₂-BP) are formed with both Co2+ Oh and Co2+ Td. The maximum specific capacity reached 167.5 C g-1 for Co(OH)₂-BP which showed ~200 % increment as compared to α-Co(OH)₂-PP at 10 mV s-1. The enhancement results from favourable transformation of Co2+ Td to electroactive Co3+ in CoOOH, high surface area (99 m2 g-1) and small crystallite size (23.5 nm) of Co(OH)₂-BP. α-Co(OH)₂ was thermally decomposed to obtain Co3O4 nanoparticles. The specific capacity of Co₃O₄ nanoparticles derived from Co(OH)₂-BP and Co(OH)₂-PP are 136.3 C g-1 and 110.7 C g-1, respectively, the fomer showing only a marginal increase in specific capacity. An asymmetric supercapacitor device based on Co(OH)₂-BP//rGO exhibits peak energy density of 14.6 W h kg-1 and peak power density of ~12 kW kg-1. The insights from this study will significantly impact the development of advanced energy storage materials.

High β-phase PVDF composite thin films filled with metal (M = Ni, Ag, Co) phosphate-based particles: advanced materials for energy harvesting applications

This study demonstrates a systematic approach to developing high-performance poly(vinylidene fluoride) (PVDF) nanocomposites through the strategic incorporation of metal phosphate nanostructures synthesized via distinct methodologies. Ni-P particles were synthesized using hydrothermal processing and Ag-P via a precipitation technique, while Co-P and Co-Pn were prepared through co-precipitation and solvothermal routes, respectively. These diverse synthetic approaches yielded particles with controlled crystallinity, morphology, and surface properties, as verified through comprehensive XRD, FTIR spectroscopy, Raman and SEM. The integration of these nanostructures into the PVDF matrix significantly promoted electroactive β-phase formation, with improvements ranging from 68% to 96%, with optimal transformation typically achieved at 3 wt% loading. Mechanical characterization revealed remarkable property enhancements, with PVDF/3Co-Pn exhibiting an unprecedented 181.83% increase in tensile strength and a 184.76% improvement in Young's modulus. Thermogravimetric analysis demonstrated substantial thermal stability enhancement, with PVDF/7Ni-P showing a 24.92 °C increase in onset degradation temperature. Ferroelectric measurements indicated that PVDF/7Co-P composites achieved superior remnant polarization with a 200% increase, while PVDF/3Co-P demonstrated optimal maximum polarization with a 75% improvement. Importantly, this research establishes clear correlations between synthesis methodology, resultant nanoparticle characteristics, and composite performance, providing critical insights into structure-property relationships in metal phosphate-PVDF systems. These findings advance the fundamental understanding of interface engineering in polymer nanocomposites and establish design principles for developing advanced materials for flexible electronics, energy storage devices, and sensing technologies.

The Role of Alkali Metal Ions in Cooperative Electrocatalysis by Bifunctional Co-Mn-Mixed Phosphates

Developing cost-effective, non-precious metal bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for advancing sustainable energy storage and conversion technologies, including zinc-air batteries, fuel cells, and water electrolyzers. This study presents a one-pot synthesis of cobalt-manganese mixed phosphates as effective bifunctional electrocatalysts for both ORR and OER. Among the catalysts tested, Na-Co-Mn-P [NaCo1.5Mn1.5(HPO4)2(PO4)] exhibited the highest catalytic activity, with a minimal ΔE of 0.86 V, indicating superior performance. The incorporation of alkali metals and the synergistic effects of metal and phosphate components enhance conductivity, electrochemical surface area, and mixed valency of transition metals, contributing to improved electrocatalytic activity. This work highlights a straightforward synthesis method and the beneficial role of metal-phosphate synergy in oxygen electrocatalysis.

Mechanistic insights into the formation of hydroxides with unconventional coordination environments to achieve their cost-effective synthesis

Transition metal hydroxides, comprising metal-centered polyhedra, are abundant in nature and have a broad range of applications. Although the intercalation/deintercalation of polyhedra with unconventional coordination numbers (UCN) plays a pivotal role in their formation process and influences their chemical behavior, the detailed mechanism remains obscure. Here, taking the kinetically controlled growth of Co(OH)2 as a model system (where polyhedra with UCN refers to 4-coordinated tetrahedra), by combining in situ pH measurement and in situ ultraviolet-visible (UV-vis) spectroscopy, we tracked Co2+ tetrahedral intercalation/deintercalation with varying OH- concentrations, discovering that the initial Co2+ tetrahedral intercalation into the Co(OH)2 lattice is inevitable and its retention is influenced by the effective OH- concentration, challenging previous beliefs about the formation of Co(OH)2 and potentially other hydroxides. More importantly, an understanding of the intercalation mechanism would significantly contribute to optimization of the synthesis conditions of hydroxides with tunable coordination environments, which hold significant application potential, as evidenced by a proof-of-concept application in the oxygen evolution reaction.

Noble-metal-free catalysts for the oxygen evolution reaction in acids

Oxygen evolution catalysts are critical components of proton exchange membrane water electrolysers (PEMWEs), playing a decisive role in determining both the performance and cost of these devices. Non-noble metal-based oxygen evolution catalysts have recently drawn significant attention as potential alternatives to expensive noble metal catalysts. This review systematically summarizes the mechanism of non-noble metal catalysts for the oxygen evolution reaction in acids with respect to their activity and stability, incorporating theoretical calculations and the Pourbaix diagram. Advanced in situ techniques are highlighted as powerful tools for probing intermediate evolution and valence changes and further elucidating the catalytic mechanism. Furthermore, key strategies for enhancing catalytic activity and durability, such as elemental doping, the support effect, surface protection and novel phase design, are discussed. Finally, this review provides insights into the remaining challenges and emerging opportunities for advancing practical oxygen evolution catalysts in PEMWEs.

Local Structure Distortion in Mn, Zn Doped Cu₂V₂O₇: Supercapacitor Performance and Emergent Spin-Phonon Coupling

Supercapacitors are rapidly gaining attention as next-generation energy storage devices due to their superior power and energy densities. This study pioneers the investigation of Mn/Zn co-doping in α-Cu₂V₂O₇ (CVO) to enhance its performance as a supercapacitor electrode material. Structural and local Structural properties of Mn/Zn co-doped CVO have been investigated through X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and X-ray Absorption Spectroscopy (XAS), revealing significant distortions that enhance supercapacitor performance. The optimized sample demonstrates a remarkable specific capacitance of 1950.95 Fg-1, energy density of 97.54 Whkg-1, and enhanced capacitive retention, attributed to the unique Cu coordination environment and improved charge transfer kinetics. Temperature-dependent Raman spectroscopy unveils spin-phonon coupling (SPC), particularly in VO₄ stretching modes, supported by magnetic measurements that shows a reduction in the Néel temperature and the emergence of zero field-cooled (ZFC) exchange bias (EB). This work is the first to report the impact of local structure distortion on both supercapacitor performance and SPC in CVO, offering a novel strategy for developing high-performance energy storage materials with spintronics potential. In addition, the assembled symmetric optimized supercapacitor shows a high energy density of 93.32 Whkg-1 and excellent cycling stability. A prototype device incorporating the optimized CVO successfully powers eight commercial LED bulbs, demonstrating its practical application potential.

Beyond conventional structures: emerging complex metal oxides for efficient oxygen and hydrogen electrocatalysis

The core of clean energy technologies such as fuel cells, water electrolyzers, and metal-air batteries depends on a series of oxygen and hydrogen-based electrocatalysis reactions, including the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), which necessitate cost-effective electrocatalysts to improve their energy efficiency. In the recent decade, complex metal oxides (beyond simple transition metal oxides, spinel oxides and ABO3 perovskite oxides) have emerged as promising candidate materials with unexpected electrocatalytic activities for oxygen and hydrogen electrocatalysis owing to their special crystal structures and unique physicochemical properties. In this review, the current progress in complex metal oxides for ORR, OER, and HER electrocatalysis is comprehensively presented. Initially, we present a brief description of some fundamental concepts of the ORR, OER, and HER and a detailed description of complex metal oxides, including their physicochemical characteristics, synthesis methods, and structural characterization. Subsequently, we present a thorough overview of various complex metal oxides reported for ORR, OER, and HER electrocatalysis thus far, such as double/triple/quadruple perovskites, perovskite hydroxides, brownmillerites, Ruddlesden-Popper oxides, Aurivillius oxides, lithium/sodium transition metal oxides, pyrochlores, metal phosphates, polyoxometalates and other specially structured oxides, with emphasis on the designed strategies for promoting their performance and structure-property-performance relationships. Moreover, the practical device applications of complex metal oxides in fuel cells, water electrolyzers, and metal-air batteries are discussed. Finally, some concluding remarks summarizing the challenges, perspectives, and research trends of this topic are presented. We hope that this review provides a clear overview of the current status of this emerging field and stimulate future efforts to design more advanced electrocatalysts.

Regulating coordination environment in metal-organic Framework@Cuprous oxide Core-Shell catalyst for Promoting electrocatalytic oxygen evolution reaction

As a kind of promising oxygen evolution reaction (OER) catalysts, metal-organic frameworks (MOF) are often constrained by their inherent poor electroconductivity and structural instability. In this study, we developed a mono-dispersed zeolitic imidazolate framework-67@cuprous oxide (ZIF-67@Cu2O) core-shell catalyst via in-situ growth method for highly efficient alkaline OER. The ZIF-67@Cu2O shows an excellent OER activity with a low overpotential of 254 mV at 10 mA cm-2 and Tafel slope of 87.9 mV·dec-1 in 1.0 M KOH. Furthermore, the ZIF-67@Cu2O also shows a high turnover frequency (TOF) of 0.166 s-1 at 1.60  V vs. RHE and long-term stability for 160 h at a high current density of 100 mA cm-2. The unique core-shell structure with the Cu2O core linked with ZIF-67 shell through interfacial di-oxygen bridge improves the structural stability, enhances the charge transfer, and provides more active sites. Moreover, the interfacial coordination structure was regulated from Co-N4 to Co-N2O2 which elevates the valence of Co sites and optimizes the adsorption free energy of oxygen-containing intermediates, thus improving the electrocatalytic OER performance. This work could propose the way for designing novel MOF-based nanomaterials and developing desirable and robust heterogeneous OER catalysts.

Fabrication of Ru-doped CuMnBP micro cluster electrocatalyst with high efficiency and stability for electrochemical water splitting application at the industrial-level current density

Electrochemical water splitting has been considered as a key pathway to generate environmentally friendly green hydrogen energy and it is essential to design highly efficient electrocatalysts at affordable cost to facilitate the redox reactions of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this work, a novel micro-clustered Ru/CuMnBP electrocatalyst is introduced, prepared via hydrothermal deposition and soaking-assisted Ru doping approaches on Ni foam substrate. Ru/CuMnBP micro-clusters exhibit relatively low HER/OER turnover overpotentials of 11 mV and 85 mV at 10 mA/cm2 in 1 M KOH. It also demonstrates a low 2-E turnover cell voltage of 1.53 V at 10 mA/cm2 for the overall water-splitting, which is comparable with the benchmark electrodes of Pt/C||RuO2. At a super high-current density of 2000 mA/cm2, the dual functional Ru/CuMnBP demonstrates an exceptionally low 2-E cell voltage of 3.13 V and also exhibits superior stability for over 10 h in 1 M KOH. Excellent electrochemical performances originate from the large electrochemical active surface area with the micro cluster morphology, high intrinsic activity of CuMnBP micro-clusters optimized through component ratio adjustment and the beneficial Ru doping effect, which enhances active site density, conductivity and stability. The usage of Ru in small quantities via the simple soaking doping approach significantly improves electrochemical reaction rates for both HER and OER, making Ru/CuMnBP micro-clusters promising candidates for advanced electrocatalytic applications.

Understanding the Role of Spin State in Cobalt Oxyhydroxides for Water Oxidation

Although the electronic state of catalysts is strongly corrected with their oxygen evolution reaction (OER) performances, understanding the role of spin state in dynamic electronic structure evolution during OER process is still challenging. Herein, we developed a spin state regulation strategy to boost the OER performance of CoOOH through elemental doping (CoMOOH, M=V, Cr, Mn, Co and Cu). Experimental results including magnetic characterization, in situ X-ray absorption spectroscopy, in situ Raman and density functional theory calculations unveil that Mn doping could successfully increase the Co sites from low spin state to intermediate spin state, leading to the largest lattice distortion and smallest energy gap between dxy and dz 2 orbitals among the obtained CoMOOH electrocatalysts. Benefiting from the promoted electron transfer from dxy to dz 2 orbital, facilitated formation of active high-valent *O-Co(IV) species at applied potential, and reduced energy barrier of rate-determining step, the CoMnOOH exhibits the highest OER performance. Our work provides significant insight into the correction between dynamic electronic structure evolution and OER performance by understanding the role of spin state regulation in metal oxyhydroxides, paving a new avenue for rational design of high-activity electrocatalysts.

Mechanistic insights into multimetal synergistic and electronic effects in a hexanuclear iron catalyst with a [Fe3(μ3-O)(μ2-OH)]2 core for enhanced water oxidation

Multinuclear molecular catalysts mimicking natural photosynthesis have been shown to facilitate water oxidation; however, such catalysts typically operate in organic solutions, require high overpotentials and have unclear catalytic mechanisms. Herein, a bio-inspired hexanuclear iron(III) complex I, Fe6(μ3-O)2(μ2-OH)2(bipyalk)2(OAc)8 (H2bipyalk = 2,2'-([2,2'-bipyridine]-6,6'-diyl)bis(propan-2-ol); OAc = acetate) with desirable water solubility and stability was designed and used for water oxidation. Our results showed that I has high efficiency for water oxidation via the water nucleophilic attack (WNA) pathway with an overpotential of only ca. 290 mV in a phosphate buffer of pH 2. Importantly, key high-oxidation-state metal-oxo intermediates formed during water oxidation were identified by in situ spectroelectrochemistry and oxygen atom transfer reactions. Theoretical calculations further supported the above identification. Reversible proton transfer and charge redistribution during water oxidation enhanced the electron and proton transfer ability and improved the reactivity of I. Here, we have shown the multimetal synergistic and electronic effects of catalysts in water oxidation reactions, which may contribute to the understanding and design of more advanced molecular catalysts.

Photocatalytic H2O2 production over boron-doped g-C3N4 containing coordinatively unsaturated FeOOH sites and CoOx clusters

Graphitic carbon nitride (g-C3N4) has gained increasing attention in artificial photosynthesis of H2O2, yet its performance is hindered by sluggish oxygen reduction reaction (ORR) kinetics and short excited-state electron lifetimes. Here we show a B-doped g-C3N4 (BCN) tailored with coordinatively unsaturated FeOOH and CoOx clusters for H2O2 photosynthesis from water and oxygen without sacrificial agents. The optimal material delivers a 30-fold activity enhancement compared with g-C3N4 under visible light, with a solar-to-chemical conversion efficiency of 0.75%, ranking among the forefront of reported g-C3N4-based photocatalysts. Additionally, an electron transfer efficiency reaches 34.1% for the oxygen reduction reaction as revealed by in situ microsecond transient absorption spectroscopy. Experimental and theoretical results reveal that CoOx initiates hole-water oxidation and prolongs the electron lifetime, whereas FeOOH accepts electrons and promotes oxygen activation. Intriguingly, the key to the direct one-step two-electron reaction pathway for H2O2 production lies in coordinatively unsaturated FeOOH to adjust the Pauling-type adsorption configuration of O2 to stabilize peroxide species and restrain the formation of superoxide radicals.

Modulating the Electronic Structure of Cobalt-Vanadium Bimetal Catalysts for High-Stable Anion Exchange Membrane Water Electrolyzer

Modulating the electronic structure of catalysts to effectively couple the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is essential for developing high-efficiency anion exchange membrane water electrolyzer (AEMWE). Herein, a coral-like nanoarray composed of nanosheets through the synergistic layering effect of cobalt and the 1D guiding of vanadium is synthesized, which promotes extensive contact between the active sites and electrolyte. The HER and OER activities can be enhanced by modulating the electronic structure through nitridation and phosphorization, respectively, enhancing the strength of metal-H bond to optimize hydrogen adsorption and facilitating the proton transfer to improve the transformation of oxygen-containing intermediates. Resultantly, the AEMWE achieves a current density of 500 mA cm-2 at 1.76 V for 1000 h in 1.0 M KOH at 70 °C. The energy consumption is 4.21 kWh Nm-3 with the producing hydrogen cost of $0.93 per kg H2. Operando synchrotron radiation and Bode phase angle analyses reveal that during the high-energy consumed OER, the dissolution of vanadium species transforms distorted Co-O octahedral into regular octahedral structures, accompanied by a shortening of the Co-Co bond length. This structural evolution facilitates the formation of oxygen intermediates, thus accelerating the reaction kinetics.

Visualizing the Structure and Dynamics of Transition Metal-Based Electrocatalysts Using Synchrotron X-Ray Absorption Spectroscopy

As the global energy structure evolves and clean energy technologies advance, electrocatalysis has become a focal point as a critical conversion pathway in the new energy sector. Transitional metal electrocatalysts (TMEs) with their distinctive electronic structures and redox properties show great potential in electrocatalytic reactions. However, complex reaction mechanisms and kinetic limitations hinder the improvement of energy conversion efficiency, highlighting the necessity for comprehensive studies on structure and performance of electrocatalysts. X-ray Absorption Fine Structure (XAFS) spectra stand out as a robust tool for examining the electrocatalyst's structures and performance due to its atomic selectivity and sensitivity to local environments. This review delves into the application of XAFS technology in characterizing TMEs, providing in-depth analyses of X-ray Absorption Near-Edge Structure (XANES) spectra, and Extended XAFS (EXAFS) spectra in both R-space and k-space. These analyses reveal intrinsic structural information, electronic interactions, catalyst stability, and aggregation morphology. Furthermore, the paper examines advancements in in-situ XAFS techniques for real-time monitoring of active site changes, capturing critical intermediate and transitional states, and elucidating the evolution of active species during electrocatalytic reactions. These insights deepen our understanding on structure-activity relationship of electrocatalysts and offer valuable guidance for designing and developing highly active and stable electrocatalysts.

Promoting Oxygen Evolution Electrocatalysis by Coordination Engineering in Cobalt Phosphate

Understanding the structure-activity correlation is an important prerequisite for the rational design of high-efficiency electrocatalysts at the atomic level. However, the effect of coordination environment on electrocatalytic oxygen evolution reaction (OER) remains enigmatic. In this work, the regulation of proton transfer involved in water oxidation by coordination engineering based on Co3(PO4)2 and CoHPO4 is reported. The HPO4 2- anion has intermediate pKa value between Co(II)-H2O and Co(III)-H2O to be served as an appealing proton-coupled electron transfer (PCET) induction group. From theoretical calculations, the pH-dependent OER properties, deuterium kinetic isotope effects, operando electrochemical impedance spectroscopy (EIS) and Raman studies, the CoHPO4 catalyst beneficially reduces the energy barrier of proton hopping and modulates the formation energy of high-valent Co species, thereby enhancing OER activity. This work demonstrates a promising strategy that involves tuning the local coordination environment to optimize PCET steps and electrocatalytic activities for electrochemical applications. In addition, the designed system offers a motif to understand the structure-efficiency relationship from those amino-acid residue with proton buffer ability in natural photosynthesis.

Anion Modulation of Ag-Imidazole Cuboctahedral Cage Microenvironments for Efficient Electrocatalytic CO2 Reduction

How to achieve CO2 electroreduction in high efficiency is a current challenge with the mechanism not well understood yet. The metal-organic cages with multiple metal sites, tunable active centers, and well-defined microenvironments may provide a promising catalyst model. Here, we report self-assembly of Ag4L4 type cuboctahedral cages from coordination dynamic Ag+ ion and triangular imidazolyl ligand 1,3,5-tris(1-benzylbenzimidazol-2-yl) benzene (Ag-MOC-X, X=NO3, ClO4, BF4) via anion template effect. Notably, Ag-MOC-NO3 achieves the highest CO faradaic efficiency in pH-universal electrolytes of 86.1 % (acidic), 94.1 % (neutral) and 95.3 % (alkaline), much higher than those of Ag-MOC-ClO4 and Ag-MOC-BF4 with just different counter anions. In situ attenuated total reflection Fourier transform infrared spectroscopy observes formation of vital intermediate *COOH for CO2-to-CO conversion. The density functional theory calculations suggest that the adsorption of CO2 on unsaturated Ag-site is stabilized by C-H⋅⋅⋅O hydrogen-bonding of CO2 in a microenvironment surrounded by three benzimidazole rings, and the activation of CO2 is dependent on the coordination dynamics of Ag-centers modulated by the hosted anions through Ag⋅⋅⋅X interactions. This work offers a supramolecular electrocatalytic strategy based on Ag-coordination geometry and host-guest interaction regulation of MOCs as high-efficient electrocatalysts for CO2 reduction to CO which is a key intermediate in chemical industry process.

Optical in situ deciphering of the surface reconstruction-assistant multielectron transfer event of single Co3O4 nanoparticles

Surface reconstruction determines the fate of catalytic sites on the near-surface during the oxygen evolution reaction. However, deciphering the conversion mechanism of various intermediate-states during surface reconstruction remains a challenge. Herein, we employed an optical imaging technique to draw the landscape of dynamic surface reconstruction on individual Co3O4 nanoparticles. By regulating the surface states of Co3O4 nanoparticles, we explored dynamic growth of the CoOx(OH)y sublayer on single Co3O4 nanoparticles and directly identified the conversion between two dynamics. Rich oxygen vacancies induced more active sites on the surface and prolonged surface reconstruction, which enhanced electrochemical redox and oxygen evolution. These results were further verified by in situ electrochemical extinction spectroscopy of single Co3O4 nanoparticles. We elucidate the heterogeneous evolution of surface reconstruction on individual Co3O4 nanoparticles and present a unique perspective to understand the fate of catalytic species on the nanosurface, which is of enduring significance for investigating the heterogeneity of multielectron-transfer events.

Porous Flower-Like Nanoarchitectures Derived from Nickel Phosphide Nanocrystals Anchored on Amorphous Vanadium Phosphate Nanosheet Nanohybrids for Superior Overall Water Splitting

Transition metal phosphides (TMPs) and phosphates (TM-Pis) nanostructures are promising functional materials for energy storage and conversion. Nonetheless, controllable synthesis of crystalline/amorphous heterogeneous TMPs/TM-Pis nanohybrids or related nanoarchitectures remains challenging, and their electrocatalytic applications toward overall water splitting (OWS) are not fully explored. Herein, the Ni2P nanocrystals anchored on amorphous V-Pi nanosheet based porous flower-like nanohybrid architectures that are self-supported on carbon cloth (CC) substrate (Ni2P/V-Pi/CC) are fabricated by conformal oxidation and phosphorization of pre-synthesized NiV-LDH/CC. Due to the unique microstructures and strong synergistic effects of crystalline Ni2P and amorphous V-Pi components, the obtained Ni2P/V-Pi/CC owns abundant active sites, suitable surface/interface electronic structure and optimized adsorption-desorption of reaction intermediates, resulting in outstanding electrocatalytic performances toward hydrogen and oxygen evolution reactions in alkaline media. Correspondingly, the assembled Ni2P/V-Pi/CC||Ni2P/V-Pi/CC electrolyzer only needs an ultralow cell voltage (1.44 V) to deliver 10 mA cm-2 water-splitting currents, exceeding its counterparts, recently reported bifunctional catalysts-based devices, and Pt/C/CC||IrO2/CC pairs. Moreover, the Ni2P/V-Pi/CC||Ni2P/V-Pi/CC manifests remarkable stability. Also, such device shows a certain prospect for OWS in acidic media. This work may spur the development of TMPs/TMPis-based nanohybrid architectures by combining structure and phase engineering, and push their applications in OWS or other clean energy options.

The mechanism of water oxidation using transition metal-based heterogeneous electrocatalysts

The water oxidation reaction, a crucial process for solar energy conversion, has garnered significant research attention. Achieving efficient energy conversion requires the development of cost-effective and durable water oxidation catalysts. To design effective catalysts, it is essential to have a fundamental understanding of the reaction mechanisms. This review presents a comprehensive overview of recent advancements in the understanding of the mechanisms of water oxidation using transition metal-based heterogeneous electrocatalysts, including Mn, Fe, Co, Ni, and Cu-based catalysts. It highlights the catalytic mechanisms of different transition metals and emphasizes the importance of monitoring of key intermediates to explore the reaction pathway. In addition, advanced techniques for physical characterization of water oxidation intermediates are also introduced, for the purpose of providing information for establishing reliable methodologies in water oxidation research. The study of transition metal-based water oxidation electrocatalysts is instrumental in providing novel insights into understanding both natural and artificial energy conversion processes.

The Influence of Light-Generated Radicals for Highly Efficient Solar-Thermal Conversion in an Ultra-Stable 2D Metal-Organic Assembly

Solar-thermal water evaporation is a promising strategy for clean water production, which needs the development of solar-thermal conversion materials with both high efficiency and high stability. Herein, we reported an ultra-stable cobalt(II)-organic assembly NKU-123 with light-generated radicals, exhibiting superior photothermal conversion efficiency and high stability. Under the irradiation of 808 nm light, the temperature of NKU-123 rapidly increases from 25.5 to 215.1 °C in 6 seconds. The solar water evaporator based on NKU-123 achieves a high solar-thermal water evaporation rate of 1.442 and 1.299 kg m-2 h-1 under 1-sun irradiation with a water evaporation efficiency of 97.8 and 87.9 % for pure water and seawater, respectively. A detailed mechanism study revealed that the formation of light-generated radicals leads to an increase of spin density of NKU-123 for enhancing the photothermal effect, which provides insights into the design of highly efficient photothermal materials.

Electrocatalytic water oxidation with manganese phosphates

As inspired by the Mn4CaO5 oxygen evolution center in nature, Mn-based electrocatalysts have received overwhelming attention for water oxidation. However, the understanding of the detailed reaction mechanism has been a long-standing problem. Herein, homologous KMnPO4 and KMnPO4•H2O with 4-coordinated and 6-coordinated Mn centers, respectively, are prepared. The two catalysts constitute an ideal platform to study the structure-performance correlation. The presence of Mn(III), Mn(IV), and Mn(V) intermediate species are identified during water oxidation. The Mn(V)=O species is demonstrated to be the substance for O-O bond formation. In KMnPO4•H2O, the Mn coordination structure did not change significantly during water oxidation. In KMnPO4, the Mn coordination structure changed from 4-coordinated [MnO4] to 5-coordinated [MnO5] motif, which displays a triangular biconical configuration. The structure flexibility of [MnO5] is thermodynamically favored in retaining Mn(III)-OH and generating Mn(V)=O. The Mn(V)=O species is at equilibrium with Mn(IV)=O, the concentration of which determines the intrinsic activity of water oxidation. This study provides a clear picture of water oxidation mechanism on Mn-based systems.

Carbon nitride quantum dots-modified cobalt phosphate for enhanced photocatalytic H2 evolution

In the present work, carbon nitride quantum dots (CNQDs)-modified cobalt phosphate (CoPi) composites CNQDs/CoPi-x (x = 1, 2, 3) were prepared at room temperature and characterized by FTIR, XRD, UV-Vis DRS, EIS, SEM, TEM/HR-TEM, XPS, and N2 gas adsorption. The morphologies and surface areas of CNQDs/CoPi-x have no remarkable change after modification of CNQDs, compared with pure CoPi. The obtained CNQDs/CoPi-x shows enhanced activity and stability of photocatalytic H2 evolution compared to pure CoPi using Eosin Y (EY) as a sensitizer and triethanolamine as an electron donor. The CNQDs/CoPi-2 possesses the highest hydrogen evolution rate, 234.5 μmol h-1  g-1 , upon visible light, which outshines that of CoPi by 2.4 times. It was believed that the enhanced photocatalytic performances of the CNQDs/CoPi-2 could result from the boosted electron transfer from radical EY·- to CNQDs/CoPi-2 by the employment of CNQDs; in addition, the visible-light activity of CNQDs contributes to hydrogen evolution. The mechanism of photocatalytic hydrogen production was discussed. This study may contribute toward the development of production of "green hydrogen" using solar.

Unveiling the Electrolyte Cations Dependent Kinetics on CoOOH-Catalyzed Oxygen Evolution Reaction

The electrolyte cations-dependent kinetics have been widely observed in many fields of electrocatalysis, however, the exact mechanism of the influence on catalytic performance is still a controversial topic of considerable discussion. Herein, combined with operando X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM), we verify that the electrolyte cations could intercalate into the layer of pristine CoOOH catalyst during the oxygen evolution reaction (OER) process, while the bigger cations lead to enlarged interlayer spacing and increased OER activity, following the order Cs+ >K+ >Na+ >Li+ . X-ray absorption spectroscopy (XAS), in situ Raman, in situ Ultraviolet-visible (UV/Vis) spectroscopy, in situ XAS spectroscopy, cyclic voltammetry (CV), and theoretical calculations reveal that the intercalation of electrolyte cations efficiently modify the oxidation states of Co by enlarging the Co-O bonds, which in turn enhance the d-band center of Co, optimize the adsorption strength of oxygen intermediates, facilitate the formation of OER active Co(IV) species, and reduce the energy barrier of the rate-determing step (RDS), thereby enhancing the OER activity. This work not only provides an informative picture to understand the complicated dependence of OER kinetics on electrolyte cations, but also sheds light on understanding the mechanism of other electrolyte cation-targeted electrocatalysis.

Spatiotemporally and Chemically Resolved Imaging of Electrocatalytic Oxygen Evolution on Single Nanoplates of Cobalt-Layered Hydroxide

Transition metal-layered hydroxides have been extensively studied in order to address the key challenge of slow kinetics of the oxygen evolution reaction (OER). However, how the catalytically active sites are evolved and the corresponding heterogeneous structure-property relationship remain unclear. Herein, using cobalt-layered hydroxide as a representative catalyst, we report a strategy for the comprehensive in situ investigation of the electrocatalytic OER process at the single electrocatalyst level using combined electrochemiluminescence (ECL) and vis-absorption microscopy. The stepwise heterogeneous electrocatalytic responses of single-cobalt hydroxide nanoplates are unveiled with ECL imaging, and the corresponding valence state changes are revealed by vis-absorption imaging. The correlated in situ and ex situ multimode analyses indicate that, during the oxidation process, the Co2+ cations in the tetrahedral sites (CoTd2+) turned into CoTd3+ and even the highly unstable CoTd4+, assisted by the interlayer water in a metastable CoOOH·xH2O phase. Crucially, the CoTd4+ sites are mainly distributed in the inner part of the nanoplates and show superior electrocatalytic properties. The correlative single-particle imaging approach for electrocatalytic process analysis with high spatiotemporal and chemical resolution enables in-depth mechanistic insights to be generated and, in turn, will benefit the rational design of electrocatalysts with enhanced performance.

Self-Reconstructed Two-Dimensional Cluster-Based Co-Organic Layer Heterojunctions for Enhanced Oxygen Evolution Reactions

When it comes to an efficient catalytic oxygen evolution reaction (OER) in the production of renewable energy and chemicals, the construction of heterogeneous structures is crucial to break the linear scalar relationship of a single catalyst. This heterogeneous structure construction helps creatively achieve high activity and stability. However, the synthesis process of heterogeneous crystalline materials is often complex and challenging to capture and reproduce, which limits their application. Here, the dynamic process of structural changes in Co-MOFs in alkali was captured by in situ powder X-ray diffraction, FT-IR spectroscopy, and Raman spectroscopy, and several self-reconfigured MOF heterogeneous materials with different structures were stably isolated. The created β-Co(OH)2/Co-MOF heterojunction structure facilitates rapid mass-charge transfer and exposure of active sites, which significantly enhanced OER activity. Experimental results show that this heterogeneous structure achieves a low overpotential of 333 mV at 10 mA cm-2. The findings provide new insights and directions for the search for highly reactive cobalt-based MOFs for sustainable energy technologies.

Single-Atom Pt Embedded in Defective Layered Double Hydroxide for Efficient and Durable Hydrogen Evolution

Electrocatalysis in neutral conditions is appealing for hydrogen production by utilizing abundant wastewater or seawater resources. Single-atom catalysts (SACs) immobilized on supports are considered one of the most promising strategies for electrocatalysis research. While they have principally exhibited breakthrough activity and selectivity for the hydrogen evolution reaction (HER) electrocatalysis in alkaline or acidic conditions, few SACs were reported for HER in neutral media. Herein, we report a facile strategy to tailor the water dissociation active sites on the NiFe LDH by inducing Mo species and an ultralow single atomic Pt loading. The defected NiFeMo LDH (V-NiFeMo LDH) shows HER activity with an overpotential of 89 mV at 10 mA cm-2 in 1 M phosphate buffer solutions. The induced Mo species and the transformed NiO/Ni phases after etching significantly increase the electron conductivity and the catalytic active sites. A further enhancement can be achieved by modulating the ultralow single atom Pt anchored on the V-NiFeMo LDH by potentiostatic polarization. A potential as low as 37 mV is obtained at 10 mA cm-2 with a pronounced long-term durability over 110 h, surpassing its crystalline LDH materials and most of the HER catalysts in neutral medium. Experimental and density functional theory calculation results have demonstrated that the synergistic effects of Mo/SAs Pt and phase transformation into NiFe LDH reduce the kinetic energy barrier of the water dissociation process and promote the H* conversion for accelerating the neutral HER.

Identifying the Role of Surface Hydroxyl on FeOCl in Bridging Electron Transfer toward Efficient Persulfate Activation

FeOCl is a highly effective candidate material for advanced oxidation process (AOP) catalysts, but there remain enormous uncertainties about the essence of its outstanding activity. Herein, we clearly elucidate the mechanism involved in the FeOCl-catalyzed perdisulfate (PDS) activation, and the role of surface hydroxyls in bridging the electron transfer between Fe sites and PDS onto the FeOCl/H2O interface is highlighted. ATR-FTIR and Raman analyses reveal that phosphate could suppress the activity of FeOCl via substituting its surface hydroxyls, demonstrating the essential role of hydroxyl in PDS activation. By the use of X-ray absorption fine structure and density functional theory calculations, we found that the polar surface of FeOCl experienced prominent hydrolyzation, which enriched abundant electrons within the microarea around the Fe site, leading to a stronger attraction between FeOCl and PDS. As a result, PDS adsorption onto the FeOCl/H2O interface was obviously enhanced, the bond length of O-O in adsorbed PDS was lengthened, and the electron transfer from Fe atoms to O-O was also promoted. This work proposed a new strategy for PDS-based AOP development and a hint of building efficient heterogeneous AOP catalysts via regulating the hydroxylation of active sites.

Facile Electrochemical Synthesis of Bifunctional Needle-like Co-P Nanoarray for Efficient Overall Water Splitting

The development of low-cost and high-performance bifunctional electrocatalysts for overall water splitting is still challenging. Herein, we employed a facile electrodeposition method to prepare bifunctional cobalt phosphide for overall water splitting. The needle-like cobalt phosphide (Co-P-1) nanoarray is uniformly distributed on nickel foam. Co-P-1 exhibits excellent electrocatalytic activity for hydrogen evolution reaction (HER, 85 mV at 10 mA/cm2, 60 mV/dec) and oxygen evolution reaction (OER, 294 mV at 50 mA/cm2, 60 mV/dec). The cell-voltage of 1.60 V is found to achieve the current density of 10 mA/cm2 for overall water splitting in the two-electrode system, comparable to that of previously reported Pt/C/NF||RuO2/NF. The excellent electrocatalytic performance can be attributed to the needle-like structure with more active sites, accelerated charge transfer and evolved bubbles' release. This work can provide new approach to the development of a bifunctional electrocatalyst for overall water splitting.

Crystallographic and Geometrical Dependence of Water Oxidation Activity in Co-Based Layered Hydroxides

Cobalt-based layered hydroxides (LHs) stand out as one of the best families of electroactive materials for the alkaline oxygen evolution reaction (OER). However, fundamental aspects such as the influence of the crystalline structure and its connection with the geometry of the catalytic sites remain poorly understood. Thus, to address this topic, we have conducted a thorough experimental and in silico study on the most important divalent Co-based LHs (i.e., α-LH, β-LH, and LDH), which allows us to understand the role of the layered structure and coordination environment of divalent Co atoms on the OER performance. The α-LH, containing both octahedral and tetrahedral sites, behaves as the best OER catalyst in comparison to the other phases, pointing out the role of the chemical nature of the crystalline structure. Indeed, density functional theory (DFT) calculations confirm the experimental results, which can be explained in terms of the more favorable reconstruction into an active Co(III)-based oxyhydroxide-like phase (dehydrogenation process) as well as the significantly lower calculated overpotential across the OER mechanism for the α-LH structure (exhibiting lower Egap). Furthermore, ex situ X-ray diffraction and absorption spectroscopy reveal the permanent transformation of the α-LH phase into a highly reactive oxyhydroxide-like stable structure under ambient conditions. Hence, our findings highlight the key role of tetrahedral sites on the electronic properties of the LH structure as well as their inherent reactivity toward OER catalysis, paving the way for the rational design of more efficient and low-maintenance electrocatalysts.

Manipulating electron redistribution induced by asymmetric coordination for electrocatalytic water oxidation at a high current density

Electronic structure manipulation with regard to active site coordination is an effective strategy to improve the electrocatalytic oxygen evolution reaction (OER) activity. Herein, we present the structure-activity relationship between oxygen-atom-mediated electron rearrangement and active site coordination asymmetry. Ni²⁺ ions are introduced to FeWO₄ on Ni foam (NF) via self-substitution to break the symmetry of the FeO₆ octahedron and regulate d-electron structure of Fe sites. Structural regulation optimizes the adsorption energy of hydroxyl on the Fe sites and promotes the partial formation of hydroxyl oxide with high OER activity on the tungstate surface. Fe_0.53Ni_0.47WO₄/NF with the asymmetric FeO₆ octahedron of Fe sites can achieve an ultralow overpotential of 170 mV at 10 mA cm^-2 and 240 mV at 1000 mA cm^-2 with robust stability for 500 h at high current density under alkaline conditions. This research develops novel electrocatalysts with impressive OER performance and provides new insights into the design of highly active catalytic systems.

A Z-Scheme Heterojunctional Photocatalyst Engineered with Spatially Separated Dual Redox Sites for Selective CO2 Reduction with Water: Insight by In Situ µs-Transient Absorption Spectra

Solar-driven CO₂ reduction by water with a Z-scheme heterojunction affords an avenue to access energy storage and to alleviate greenhouse gas (GHG) emissions, yet the separation of charge carriers and the integrative regulation of water oxidation and CO₂ activation sites remain challenging. Here, a BiVO₄ /g-C₃ N₄ (BVO/CN) Z-scheme heterojunction as such a prototype is constructed by spatially separated dual sites with CoO_x clusters and imidazolium ionic liquids (IL) toward CO₂ photoreduction. The optimized CoO_x -BVO/CN-IL delivers an ≈80-fold CO production rate without H₂ evolution compared with urea-C₃ N₄ counterpart, together with nearly stoichiometric O₂ gas produced. Experimental results and DFT calculations unveil the cascade Z-scheme charge transfer and subsequently the prominent redox co-catalysis by CoO_x and IL for holes-H₂ O oxidation and electrons-CO₂ reduction, respectively. Moreover, in situ µs-transient absorption spectra clearly show the function of each cocatalyst and quantitatively reveal that the resulting CoO_x -BVO/CN-IL reaches up to the electron transfer efficiency of 36.4% for CO₂ reduction, far beyond those for BVO/CN (4.0%) and urea-CN (0.8%), underlining an exceptional synergy of dual reaction sites engineering. This work provides deep insights and guidelines for the rational design of highly efficient Z-scheme heterojunctions with precise redox catalytic sites toward solar fuel production.

In Situ Surface Restructuring of Amorphous Ni-Doped CoMo Phosphate-Based Three-Dimensional Networked Nanosheets: Highly Efficient and Durable Electrocatalyst for Overall Alkaline Water Splitting

Developing cost-efficient bifunctional electrocatalysts with high efficiency and durability for the production of green hydrogen and oxygen is a demanding and challenging research area. Due to their high earth abundance, transition metal-based electrocatalysts are alternatives to noble metal-based water splitting electrocatalysts. Herein, binder-free three-dimensional (3D) networked nanosheets of Ni-doped CoMo ternary phosphate (Pi) were prepared using a facile electrochemical synthetic strategy on flexible carbon cloth without any high-temperature heat treatment or complicated electrode fabrication. The optimized CoMoNiPi electrocatalyst delivers admirable hydrogen (η₁₀ = 96 mV) and oxygen (η₁₀ = 272 mV) evolution performances in 1.0 M KOH electrolyte. For overall water splitting in a two-electrode system, the present catalyst demands only 1.59 and 1.90 V to reach current densities of 10 and 100 mA/cm², respectively, which is lower than that of the Pt/C||RuO₂ couple (1.61 V @ 10 mA/cm², 2 V > @ 100 mA/cm²) and many other catalysts reported previously. Furthermore, the present catalyst delivers excellent long-term stability in a two-electrode system continuously over 100 h at a high current density of 100 mA/cm², exhibiting nearly 100% faradic efficiency. The unique 3D amorphous structure with high porosity, a high active surface area, and lower charge transfer resistance provides excellent overall water splitting. Notably, the amorphous structure of the present catalyst favors the in situ surface reconstruction during electrolysis and generates very stable surface-active sites capable of long-term performance. The present work provides a route for the preparation of multimetallic-Pi nanostructures for various electrode applications that are easy to prepare and have superior activity, high stability, and low cost.

PO6 geometric configuration unit enhanced electrocatalytic performance of Co3O4 in acidic oxygen evolution

It is challenging to develop high-efficient and stable nonprecious metal-based electrocatalyst for oxygen evolution reaction (OER) in acid for proton exchange membrane (PEM) water splitting. Herein, P atoms were introduced into the lattice of spinel Co₃O₄ (P-Co₃O₄) to replace with octahedral coordinated Co³⁺ via a hydrothermal process following a thermal treatment. The formation of PO₆ geometric configuration unit in Co₃O₄ can trigger electron rearrangement around Co ions, which resulted in the high-active Co²⁺ site on the surface, significantly decreasing the energy barrier of rate-determining step for OER. Moreover, the weaker covalency of the Co 3d-O 2p bond and higher formation energy of oxygen vacancy around Co²⁺ in P-Co₃O₄ inhibited the participation of lattice oxygen during OER process, enabling that P-Co₃O₄ can work stably in acidic media. The obtained P-Co₃O₄ afforded satisfying stability over 30 h in a PEM electrolysis device with an overpotential of 400 mV@10 mA/cm² in 0.1 M HClO₄.

Identification of the Origin for Reconstructed Active Sites on Oxyhydroxide for Oxygen Evolution Reaction

The regulation of atomic and electronic structures of active sites plays an important role in the rational design of oxygen evolution reaction (OER) catalysts toward electrocatalytic hydrogen generation. However, the precise identification of the active sites for surface reconstruction behavior during OER remains elusive for water-alkali electrolysis. Herein, irreversible reconstruction behavior accompanied by copper dynamic evolution for cobalt iron layered double hydroxide (CoFe LDH) precatalyst to form CoFeCuOOH active species with high-valent Co species is reported, identifying the origin of reconstructed active sites through operando UV-Visible (UV-vis), in situ Raman, and X-ray absorption fine-structure (XAFS) spectroscopies. Density functional theory analysis rationalizes this typical electronic structure evolution causing the transfer of intramolecular electrons to form ligand holes, promoting the reconstruction of active sites. Specifically, unambiguous identification of active sites for CoFeCuOOH is explored by in situ ¹⁸ O isotope-labeling differential electrochemical mass spectrometry (DEMS) and supported by theoretical calculation, confirming mechanism switch to oxygen-vacancy-site mechanism (OVSM) pathway on lattice oxygen. This work enables to elucidate the vital role of dynamic active-site generation and the representative contribution of OVSM pathway for efficient OER performance.

Hydrogen Production Technology Promotes the Analysis and Prospect of the Hydrogen Fuel Cell Vehicles Development under the Background of Carbon Peak and Carbon Neutrality in China

Hydrogen fuel cell vehicles have always been regarded as the main direction for developing new energy vehicles in the future due to their advantages of zero emission, high cruising range, and strong environmental adaptability. Currently, although the related technologies have gradually matured, there are still many factors hindering its development. One of the main reasons is that the price of hydrogen fuel increases the cost of using vehicles, which puts it at a competitive disadvantage compared with traditional fuel vehicles and pure electric vehicles. Herein, we summarize the recent development status of hydrogen fuel cell vehicles at home and abroad, and analyze the cost and sustainability brought by the latest scientific research progress to the hydrogen production industry, which is derived from basic research on electrocatalysts used in industrial electrocatalytic water splitting with an alkaline electrolyte. Finally, the development of hydrogen fuel cell vehicles was analyzed and prospected, which is one of the main application fields of hydrogen in the future.

Unraveling the Synergy of Anion Modulation on Co Electrocatalysts by Pulsed Laser for Water Splitting: Intermediate Capturing by In Situ/Operando Raman Studies

Herein, the authors produce Co-based (Co₃ (PO₄ )₂ , Co₃ O₄ , and Co₉ S₈ ) electrocatalysts via pulsed laser ablation in liquid (PLAL) to explore the synergy of anion modulation on phase-selective active sites in the electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Co₃ (PO₄ )₂ displays an ultralow overpotential of 230 mV at 10 mA cm^-2 with 48.5 mV dec^-1 Tafel slope that outperforms the state-of-the-art Ir/C in OER due to its high intrinsic activity. Meanwhile, Co₉ S₈ exhibits the highest HER performance known to the authors among the synthesized Co-based catalysts, showing the lowest overpotential of 361 mV at 10 mA cm^-2 with 95.8 mV dec^-1 Tafel slope in the alkaline medium and producing H₂ gas with ≈500 mmol g^-1 h^-1 yield rate under -0.45 V versus RHE. The identified surface reactive intermediates over in situ electrochemical-Raman spectroscopy reveal that cobalt(hydr)oxides with higher oxidation states of Co-cation forming under oxidizing potentials on the electrode-electrolyte surface of Co₃ (PO₄ )₂ facilitate the OER, while Co(OH)₂ facilitate the HER. Notably, the fabricated two-electrode electrolyzers using Co₃ (PO₄ )₂ , Co₃ O₄ , and Co₉ S₈ electrocatalysts deliver the cell potentials ≈2.01, 2.11, and 1.89 V, respectively, at 10 mA cm^-2 . This work not only shows PLAL-synthesized electrocatalysts as promising candidates for water splitting, but also provides an underlying principle for advanced energy-conversion catalysts and beyond.

Enhanced oxygen evolution over dual corner-shared cobalt tetrahedra

Developing efficient catalysts is of paramount importance to oxygen evolution, a sluggish anodic reaction that provides essential electrons and protons for various electrochemical processes, such as hydrogen generation. Here, we report that the oxygen evolution reaction (OER) can be efficiently catalyzed by cobalt tetrahedra, which are stabilized over the surface of a Swedenborgite-type YBCo4O7 material. We reveal that the surface of YBaCo4O7 possesses strong resilience towards structural amorphization during OER, which originates from its distinctive structural evolution toward electrochemical oxidation. The bulk of YBaCo4O7 composes of corner-sharing only CoO4 tetrahedra, which can flexibly alter their positions to accommodate the insertion of interstitial oxygen ions and mediate the stress during the electrochemical oxidation. The density functional theory calculations demonstrate that the OER is efficiently catalyzed by a binuclear active site of dual corner-shared cobalt tetrahedra, which have a coordination number switching between 3 and 4 during the reaction. We expect that the reported active structural motif of dual corner-shared cobalt tetrahedra in this study could enable further development of compounds for catalyzing the OER.

Metal-Corrole-Based Porous Organic Polymers for Electrocatalytic Oxygen Reduction and Evolution Reactions

Integrating molecular catalysts into designed frameworks often enables improved catalysis. Compared with porphyrin-based frameworks, metal-corrole-based frameworks have been rarely developed, although monomeric metal corroles are usually more efficient than porphyrin counterparts for the electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). We herein report on metal-corrole-based porous organic polymers (POPs) as ORR and OER electrocatalysts. M-POPs (M=Mn, Fe, Co, Cu) were synthesized by coupling metal 10-phenyl-5,15-(4-iodophenyl)corrole with tetrakis(4-ethynylphenyl)methane. Compared with metal corrole monomers, M-POPs displayed significantly enhanced catalytic activity and stability. Co-POP outperformed other M-POPs by achieving four-electron ORR with a half-wave potential of 0.87 V vs. RHE and reaching 10 mA cm^-2 OER current density at 340 mV overpotential. This work is unparalleled to develop and explore metal-corrole-based POPs as electrocatalysts.

Interfacial Fe-O-Ni-O-Fe Bonding Regulates the Active Ni Sites of Ni-MOFs via Iron Doping and Decorating with FeOOH for Super-Efficient Oxygen Evolution

The integration of Fe dopant and interfacial FeOOH into Ni-MOFs [Fe-doped-(Ni-MOFs)/FeOOH] to construct Fe-O-Ni-O-Fe bonding is demonstrated and the origin of remarkable electrocatalytic performance of Ni-MOFs is elucidated. X-ray absorption/photoelectron spectroscopy and theoretical calculation results indicate that Fe-O-Ni-O-Fe bonding can facilitate the distorted coordinated structure of the Ni site with a short nickel-oxygen bond and low coordination number, and can promote the redistribution of Ni/Fe charge density to efficiently regulate the adsorption behavior of key intermediates with a near-optimal d-band center. Here the Fe-doped-(Ni-MOFs)/FeOOH with interfacial Fe-O-Ni-O-Fe bonding shows superior catalytic performance for OER with a low overpotential of 210 mV at 15 mA cm^-2 and excellent stability with ≈3 % attenuation after a 120 h cycle test. This study provides a novel strategy to design high-performance Ni/Fe-based electrocatalysts for OER in alkaline media.

Hydrothermal synthesized delafossite CuGaO2 as an electrocatalyst for water oxidation

Hydrogen production from water splitting provides an effective method to alleviate the ever-growing global energy crisis. In this work, delafossite CuGaO₂ (CGO) crystal was synthesized through hydrothermal routes with Cu(NO₃)₂·3H₂O and Ga(NO₃)₃·xH₂O used as reactants. The addition of cetyltrimethylammonium bromide (CTAB) was found to play an important role in modifying the morphology of CuGaO₂ (CGO-CTAB). With the addition of CTAB, the morphology of CGO-CTAB samples changed from irregular flake to typical hexagonal sheet microstructure, with an average size of 1-2 μm and a thickness of around 100 nm. Furthermore, the electrocatalytic activity of CGO-CTAB crystals for oxygen evolution reaction (OER) was also studied and compared with that of CGO crystals. CGO-CTAB samples exhibited better activity than CGO. An overpotential of 391.5 mV was shown to be able to generate a current density of 10 mA/cm². The as-prepared samples also demonstrate good stability for water oxidation and relatively fast OER kinetics with a Tafel slope of 56.4 mV/dec. This work highlights the significant role of modification of CTAB surfactants in preparing CGO related crystals, and the introduction of CTAB was found to help to improve their electrocatalytic activity for OER.