Intracellular signal transduction as a factor in the development of "smart" biomaterials for bone tissue engineering

Dynamic ion-releasing biomaterials actively shape the microenvironment to enhance healing

Dynamic ion-releasing biomaterials have redefined the role of implantable bone devices, transitioning them from passive mechanical support to active players in tissue regeneration. These materials actively modulate the surrounding biological microenvironment by releasing bioactive ions (e.g.: calcium, phosphate, and cobalt) which dynamically interact with cells and tissues surrounding them. This interaction becomes the microenvironment highly active and accelerates bone healing, promoting osteogenesis, and enhancing osseointegration. The ions modulate key biological processes in this regard, including osteoblast adhesion, proliferation, differentiation, angiogenesis, and immune responses, as well as coupled physiological mechanisms, ensuring that the implanted biomaterials foster an optimal environment for bone regeneration. More advanced surface modifications onto materials (e.g.: nanostructuring hydroxyapatites coatings) have been shown to further boost ion release, amplifying the ability of the material to influence surrounding tissues. As a result, ion-releasing biomaterials not only improve implant integration but also accelerate the overall healing process. Looking forward, the development of smart biomaterials capable of adjusting ion release in response to environmental changes offers exciting possibilities for personalized regenerative therapies and this review provides a comprehensive understanding of how dynamic ion-releasing biomaterials actively shape the microenvironment to enhance healing, focusing on their ability to modulate biological processes such as osteogenesis and angiogenesis. By examining the latest advances in surface modifications and ion-release mechanisms, this review also aims to revise the potential of these materials to revolutionize regenerative medicine, offering knowledge to guide the development of next-generation biomaterials for improved clinical outcomes.

The Biological Properties of Co-Doped Monetite Are Influenced by Thermal Treatment

Calcium phosphates, notably monetite, are valued biomaterials for bone applications owing to their osteogenic properties and rapid uptake by bone cells. This study investigates the enhancement of these properties through Cobalt doping, which is known to induce hypoxia and promote bone cell differentiation. Heat treatments at 700°C, 900°C, and 1050°C are applied to both monetite and Cobalt-doped monetite, facilitating the development of purer, more crystalline phases with varied particle sizes and optimized cellular responses. Comprehensive physicochemical characterization through XRD, FTIR, Raman, SEM/EDS, and ASAP analyses shows significant phase transformations into pyrophosphate, influencing the materials' structural and functional attributes. When utilized to condition a culture medium for MC3T3-E1 cells, these materials demonstrate non-cytotoxic behavior and provoke specific gene responses associated with the osteoblastic phenotype, angiogenesis, adhesion, and extracellular matrix remodeling. Significantly, non-heat-treated Cobalt-doped Monetite retains properties advantageous for clinical applications such as dental and orthopedic implants, where lower processing temperatures are crucial. This attribute, combined with the material's straightforward production, highlights its practicality and potential cost-effectiveness. Further research is essential to assess the long-term safety and efficacy of these materials in clinical settings. Our findings underscore the promising role of Cobalt-doped Monetite in advancing bone repair and regeneration, setting the stage for future innovations in treating bone lesions, enhancing implant integration, and developing advanced prosthetic coatings within the field of tissue engineering.

Impact of zirconia-based oxide on endothelial cell dynamics and extracellular matrix remodeling

INTRODUCTION

Zirconia (ZrO2) is highly regarded in dental restoration due to its aesthetic compatibility and mechanical properties that align with biological tissues. This study explores the effects of stabilized ZrO2 on endothelial cell function and extracellular matrix (ECM) remodeling, processes critical to successful osseointegration in dental implants.

METHODOLOGY

Human Umbilical Vein Endothelial Cells (HUVECs) were cultured in ZrO2 -enriched medium under both static and shear stress conditions. Newly implemented techniques, including detailed zirconia surface characterization using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD), were used to verify material properties. Gene and protein expression related to cell adhesion, proliferation, and ECM remodeling were assessed through RT-qPCR and Western blotting. Zymography was used to evaluate the activity of matrix metalloproteinases (MMP2 and MMP9) involved in ECM remodeling.

RESULTS

Characterization data confirmed the stability and structural properties of ZrO2, revealing a tetragonal crystalline structure and rough surface morphology conducive to cell adhesion. ZrO2 exposure led to the downregulation of Src, a key regulator of cell adhesion, while upregulating cell cycle regulators p15, CDK2, and CDK4, indicating enhanced cell proliferation. Under shear stress, ZrO2 modulated TGF-β and MAPK signaling, affecting cell proliferation and angiogenesis. MMP2 and MMP9 activity increased in static conditions but decreased under shear stress, suggesting ZrO2 dynamic role in ECM remodeling.

CONCLUSION

This study shows that stabilized zirconia (ZrO2) modulates endothelial cell dynamics and ECM remodeling, key for osseointegration. ZrO2 downregulated Src expression and upregulated cell cycle regulators, enhancing endothelial proliferation. It also affected TGF-β and MAPK pathways, influencing angiogenesis, and differentially modulated MMP2 and MMP9 activity depending on mechanical conditions. These findings highlight ZrO2 has potential ability to enhance vascular and tissue integration in dental applications.

The Effects of the Addition of Strontium on the Biological Response to Calcium Phosphate Biomaterials: A Systematic Review

Strontium is known for enhancing bone metabolism, osteoblast proliferation, and tissue regeneration. This systematic review aimed to investigate the biological effects of strontium-doped calcium phosphate biomaterials for bone therapy. A literature search up to May 2024 across Web of Science, PubMed, and Scopus retrieved 759 entries, with 42 articles meeting the selection criteria. The studies provided data on material types, strontium incorporation and release, and in vivo and in vitro evidence. Strontium-doped calcium phosphate biomaterials were produced via chemical synthesis and deposited on various substrates, with characterization techniques confirming successful strontium incorporation. Appropriate concentrations of strontium were non-cytotoxic, stimulating cell proliferation, adhesion, and osteogenic factor production through key signaling pathways like Wnt/β-catenin, BMP-2, Runx2, and ERK. In vivo studies identified novel bone formation, angiogenesis, and inhibition of bone resorption. These findings support the safety and efficacy of strontium-doped calcium phosphates, although the optimal strontium concentration for desired effects is still undetermined. Future research should focus on optimizing strontium release kinetics and elucidating molecular mechanisms to enhance clinical applications of these biomaterials in bone tissue engineering.

Combination of in silico and cell culture strategies to predict biomaterial performance: Effects of sintering temperature on the biological properties of hydroxyapatite

Advances in methodologies to evaluate biomaterials brought an explosive growth of data, ensuing computational challenges to better analyzing them and allowing for high-throughput profiling of biological systems cost-efficiently. In this sense, we have applied bioinformatics tools to better understand the biological effect of different sintering temperatures of hydroxyapatite (abbreviated HA; at 1100, 1150, and 1250°C) on osteoblast performance. To do, we have better analyzed an earlier deposited study, in which the access code is E-MTAB-7219, which the authors have explored different in silico tools on this purpose. In this study, differential gene expression analyses were performed using the gene set variation analysis (GSVA) algorithm from the transcriptomes respecting the thermal changes of HA, which were validated using exclusively in vitro strategies. Furthermore, in silico approaches elected biomarkers during cell behavior in response to different sintering temperatures of HA, and it was further validated using cell culture and qPCR technologies. Altogether, the combination of those strategies shows the capacity of sintered HA at 1250°C to present a better performance in organizing an adequate microenvironment favoring bone regeneration, angiogenesis and material resorption stimulus once it has promoted higher involvement of genes such as CDK2, CDK4 (biomarkers of cell proliferation), p15, Osterix gene (related with osteogenic differentiation), RANKL (related with osteoclastogenesis), VEGF gene (related with angiogenesis), and HIF1α (related with hypoxia microenvironment). Altogether, the combination of in silico and cell culture strategies shows the capacity of sintered HA at 1250°C in guaranteeing osteoblast differentiation and it can be related in organizing an adequate microenvironment favoring bone regeneration, angiogenesis, and material resorption stimulus.

Development of cobalt (Co)-doped monetites for bone regeneration

Cobalt-doped monetite powders were synthesized by coprecipitation method under a cobalt nominal content between 2 and 20 mol % of total cation. Structural characterization of samples was performed by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy. XRD results indicated that the Co-doped samples exhibited a monetite single-phase with the cell parameters and crystallite size dependent on the amount of substitutional element incorporated into the triclinic crystalline structure. Cell viability and adhesion assays using pre-osteoblastic cells showed there is no toxicity and the RTqPCR analysis showed significant differences in the expression for osteoblastic phenotype genes, showing a potential material for the bone regeneration.

Mechanosignaling-related angiocrine factors drive osteoblastic phenotype in response to zirconia

BACKGROUND

The growing use of zirconia as a ceramic material in dentistry is attributed to its biocompatibility, mechanical properties, esthetic appearance, and reduced bacterial adhesion. These favorable properties make ceramic materials a viable alternative to commonly used titanium alloys. Mimicking the physiological properties of blood flow, particularly the mechanosignaling in endothelial cells (ECs), is crucial for enhancing our understanding of their role in the response to zirconia exposure.

METHODS

In this study, EC cultures were subjected to shear stress while being exposed to zirconia for up to 3 days. The conditioned medium obtained from these cultures was then used to expose osteoblasts for a duration of 7 days. To investigate the effects of zirconia on osteoblasts, we examined the expression of genes associated with osteoblast differentiation, including Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Additionally, we assessed the impact of mechanosignaling-related angiocrine factors on extracellular matrix (ECM) remodeling by measuring the activities of matrix metalloproteinases 2 and 9 (MMP2 and MMP9) during the acquisition of the osteogenic phenotype, which precedes mineralization.

RESULTS

Our data revealed that mechanosignaling-related angiocrine factors play a crucial role in promoting an osteoblastic phenotype in response to zirconia exposure. Specifically, exposed osteoblasts exhibited significantly higher expression levels of genes associated with osteoblast differentiation, such as Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Furthermore, the activities of MMP2 and MMP9, which are involved in ECM remodeling, were modulated by mechanosignaling-related angiocrine factors. This modulation is likely an initial event preceding the mineralization phase.

CONCLUSION

Based on our findings, we propose that mechanosignaling drives the release of angiocrine factors capable of modulating the osteogenic phenotype at the biointerface with zirconia. This process creates a microenvironment that promotes wound healing and osseointegration. Moreover, these results highlight the importance of considering the mechanosignaling of endothelial cells in the modulation of bone healing and osseointegration in the context of blood vessel effects. Our data provide new insights and open avenues for further investigation into the influence of mechanosignaling on bone healing and the osseointegration of dental devices.

The Action of Angiocrine Molecules Sourced from Mechanotransduction-Related Endothelial Cell Partially Explain the Successful of Titanium in Osseointegration

Since Branemark's findings, titanium-based alloys have been widely used in implantology. However, their success in dental implants is not known when considering the heterogenicity of housing cells surrounding the peri-implant microenvironment. Additionally, they are expected to recapitulate the physiological coupling between endothelial cells and osteoblasts during appositional bone growth during osseointegration. To investigate whether this crosstalk was happening in this context, we considered the mechanotransduction-related endothelial cell signaling underlying laminar shear stress (up to 3 days), and this angiocrine factor-enriched medium was harvested further to use exposing pre-osteoblasts (pOb) for up to 7 days in vitro. Two titanium surfaces were considered, as follows: double acid etching treatment (w_DAE) and machined surfaces (wo_DAE). These surfaces were used to conditionate the cell culture medium as recommended by ISO10993-5:2016, and this titanium-enriched medium was later used to expose ECs. First, our data showed that there is a difference between the surfaces in releasing Ti molecules to the medium, providing very dynamic surfaces, where the w_DAE was around 25% higher (4 ng/mL) in comparison to the wo_DAE (3 ng/mL). Importantly, the ECs took up some of this titanium content for up to 3 days in culture. However, when this conditioned medium was used to expose pOb for up to 7 days, considering the angiocrine factors released from ECs, the concentration of Ti was lesser than previously reported, reaching around 1 ng/mL and 2 ng/mL, respectively. Thereafter, pOb exposed to this angiocrine factor-enriched medium presented a significant difference when considering the mechanosignaling subjected to the ECs. Shear-stressed ECs showed adequate crosstalk with osteoblasts, stimulating the higher expression of the Runx2 gene and driving higher expressions of Alkaline phosphatase (ALP), bone sialoprotein (BSP), and osteocalcin. Mechanotransduction-related endothelial cell signaling as a source of angiocrine molecules also stimulated the higher expression of the Col3A1 gene in osteoblasts, which suggests it is a relevant protagonist during trabecular bone growth. In fact, we investigated ECM remodeling by first evaluating the expression of genes related to it, and our data showed a higher expression of matrix metalloproteinase (MMP) 2 and MMP9 in response to mechanosignaling-based angiocrine molecules, independent of considering w_DAE or the wo_DAE, and this profile reflected on the MMP2 and MMP9 activities evaluated via gelatin-based zymography. Complimentarily, the ECM remodeling seemed to be a very regulated mechanism in mature osteoblasts during the mineralization process once both TIMP metallopeptidase inhibitor 1 and 2 (TIMP1 and TIMP2, respectively) genes were significantly higher in response to mechanotransduction-related endothelial cell signaling as a source of angiocrine molecules. Altogether, our data show the relevance of mechanosignaling in favoring ECs' release of bioactive factors peri-implant, which is responsible for creating an osteogenic microenvironment able to drive osteoblast differentiation and modulate ECM remodeling. Taking this into account, it seems that mechanotransduction-based angiocrine molecules explain the successful use of titanium during osseointegration.

Titanium-Enriched Medium Promotes Environment-Induced Epigenetic Machinery Changes in Human Endothelial Cells

It is important to understand whether endothelial cells are epigenetically affected by titanium-enriched media when angiogenesis is required during bone development and it is expected to be recapitulated during osseointegration of biomaterials. To better address this issue, titanium-enriched medium was obtained from incubation of titanium discs for up to 24 h as recommended by ISO 10993-5:2016, and further used to expose human umbilical vein endothelial cells (HUVECs) for up to 72 h, when the samples were properly harvested to allow molecular analysis and epigenetics. In general, our data show an important repertoire of epigenetic players in endothelial cells responding to titanium, reinforcing protein related to the metabolism of acetyl and methyl groups, as follows: Histone deacetylases (HDACs) and NAD-dependent deacetylase sirtuin-1 (Sirt1), DNA methyltransferases (DNMTs) and ten-eleven translocation (TET) methylcytosine dioxygenases, which in conjunction culminate in driving chromatin condensation and the methylation profile of DNA strands, respectively. Taking our data into consideration, HDAC6 emerges as important player of this environment-induced epigenetic mechanism in endothelial cells, while Sirt1 is required in response to stimulation of reactive oxygen species (ROS) production, as its modulation is relevant to vasculature surrounding implanted devices. Collectively, all these findings support the hypothesis that titanium keeps the surrounding microenvironment dynamically active and so affects the performance of endothelial cells by modulating epigenetics. Specifically, this study shows the relevance of HDAC6 as a player in this process, possibly correlated with the cytoskeleton rearrangement of those cells. Furthermore, as those enzymes are druggable, it opens new perspectives to consider the use of small molecules to modulate their activities as a biotechnological tool in order to improve angiogenesis and accelerate bone growth with benefits of a fast recovery time for patients.

Nanohydroxyapatite-Blasted Bioactive Surface Drives Shear-Stressed Endothelial Cell Growth and Angiogenesis

Nanosized crystalline hydroxyapatite coating (HAnano®) accelerates the osteointegration of dental implants which is hypothesized to drive angiogenesis. In order to test this hypothesis, we have subjected shear-stressed human umbilical vein endothelial cells (HUVECs) to a HAnano®-enriched medium, as well as to surface presenting dual acid etching (DAE) as a control. To note, the titanium implants were coated with 10 nm in diameter HA particles using the Promimic HAnano method. Our data reveals that HAnano® modulates higher expression of genes related with endothelial cell performance and viability, such as VEGF, eNOS, and AKT, and further angiogenesis in vitro by promoting endothelial cell migration. Additionally, the data shows a significant extracellular matrix (ECM) remodeling, and this finding seems developing a dual role in promoting the expression of VEGF and control endothelial cell growth during angiogenesis. Altogether, these data prompted us to further validate this phenomenon by exploring genes related with the control of cell cycle and in fact our data shows that HAnano® promotes higher expression of CDK4 gene, while p21 and p15 genes (suppressor genes) were significantly lower. In conjunction, our data shows for the first time that HAnano®-coated surfaces drive angiogenesis by stimulating a proliferative and migration phenotype of endothelial cells, and this finding opens novel comprehension about osseointegration mechanism considering nanosized hydroxyapatite coating dental implants.

Beta1-integrin/Hedgehog-Gli1 signaling pathway fuels the diameter-dependent osteoblast differentiation on different TiO2 nanotubes: The optimal-diameter nanotubes for osteoblast differentiation

Micro/nanotextured topographies (MNTs) can modulate cell-biomaterial interactions mostly by their controllable geometrics. Among them, TiO₂ nanotubes, regarded as having a highly controllable nanoscale geometry, have been extensively investigated and applied and significantly affect diameter-dependent cell biological behaviors. In this study, we used five typical MNTs decorated with TiO₂ nanotubes with diameters of 30, 50, 70, 100 and 120 nm to explore the optimal nanotube diameter for improving the biofunctional properties and to more deeply understand the underlying mechanisms by which these MNTs affect osteogenic differentiation by revealing the effect of beta1-integrin/Hedgehog-Gli1 signaling on this process. The MNTs affected MG63 osteoblast-like cell spreading, osteogenic gene expression (BMP-2, Runx2 and ALP), mineralization and ALP activity in a diameter-dependent pattern, and the optimal TiO₂ nanotube diameter of 70 nm provided the best microenvironment for osteogenic differentiation as well as beta1-integrin/Hedgehog-Gli1 signaling activation. This enhanced osteogenic differentiation by the optimal-diameter TiO₂ nanotubes of 70 nm was attenuated via suppression of the beta1-integrin/ Hedgehog-Gli1 signaling, which indicated a significant role of this pathway in mediating the diameter-dependent osteogenic differentiation promotional effect of MNTs with different TiO₂ nanotube diameters. These results might provide deeper insights into the signal transduction mechanisms by which different nanoscale geometries influence cellular functions for biomaterial modification and biofunctionalization.

Effect of rosmarinic acid on differentiation and mineralization of MC3T3-E1 osteoblastic cells on titanium surface

Titanium (Ti) is a widely used biomaterial for dental implants because of its outstanding biocompatibility for hard tissues. Osseointegration, the interaction between implanted biomaterials and living cells in bone, is essential for successful implantation. Rosmarinic acid (RA) is a plant-derived phytochemical with low toxicity and side effects and has various effects that can be applied as a therapeutic substance. The MC3T3-E1 osteoblastic cells on the Ti surface in medium with or without 14 μg/ml RA were used to test RA effects on osteoblast differentiation, cell viability and mineralization during differentiation. RA treatment increased osteoblast differentiation, cell viability and mineralization in MC3T3-E1 osteoblastic cells on Ti surface during differentiation, upregulating Runx-2 and OPG, but downregulating RANKL. This study suggest that RA should be applied as an effective functional and therapeutic substance to enhance osseointegration of osteoblast cells by increasing differentiation, mineralization, and bone formation through the RANKL/RANK/OPG pathway during the differentiation in MC3T3-E1 osteoblastic cells on the Ti surface.

PI3K/AKT signaling drives titanium-induced angiogenic stimulus

Although osseointegration and clinical success of titanium (Ti)-implanted materials depend on neovascularization in the reactional peri-implant tissue, very little has been achieved considering the Ti-molecules release on the behavior of endothelial cells. To address this issue, we challenged endothelial cells (HUVECs) with Ti-enriched medium obtained from two types of commercial titanium surfaces [presenting or not dual-acid etching (DAE)] up to 72 h to allow molecular machinery analysis. Our data show that the Ti-enriched medium provokes significant stimulus of angiogenesis-related machinery in endothelial cells by upexpressing VEGFR1, VEGFR2, VEGF, eNOS, and iNOS genes, while the PI3K/Akt signaling pathway was also significantly enhanced. As PI3K/AKT signaling was related to angiogenesis in response to vascular endothelial growth factor (VEGF), we addressed the importance of PI3K/Akt upon Ti-enriched medium responses by concomitantly treating the cells with wortmannin, a well-known PI3K inhibitor. Wortmannin suppressed the angiogenic factors, because VEGF, VEGFR1, and eNOS genes were downregulated in those cells, highlighting the importance of PI3K/AKT signaling on driving angiogenic phenotype and angiogenesis performance within the peri-implant tissue reaction. In conjunction, these data reinforce that titanium-implantable devices modify the metabolism of surrounding cells, such as endothelial cells, probably coupling osteogenesis and angiogenesis processes in peri-implant tissue and then contributing to successfully osseointegration of biomedical titanium-based devices.

Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility

Novel-biofunctionalized surfaces are required to improve the performance of endosseous implants, which are mainly related to the resistance against biocorrosion, as well as for the consideration of osteoinductive phenomena. Among different strategies, the use of bisphosphonate molecules as linkers between titanium dioxide (TiO₂) surfaces and proteins is a distinctive approach, one in which bisphosphonate could play a role in the osseointegration. Thus, to address this issue, we proposed a novel biofunctionalization of TiO₂ surfaces using sodium alendronate (ALN) as a linker and bovine serum albumin as the protein. Physicochemical analysis of the functionalized surfaces was performed using contact angle analyses and surface roughness measurements, which indicated an efficient functionalization. The biocompatibility of the functionalized surfaces was analyzed through the adhesion behavior of the pre-osteoblasts onto the samples. Overall, our data showed a significant improvement concerning the cell adhesion by modulating the adhesion cell-related set of genes. The obtained results show that for modified surfaces there is an increase of up to 100 times in the percentage of cells adhered when compared to the control, besides the extracellular matrix remodeling seemed to be an essential prerequisite for the early stages of cell adhesion on to the biomaterials, which was assayed by evaluating the matrix metalloproteinase activities as well as the gene activations. In the expressions of the Bsp and Bglap2 genes, for the group containing ALN (TiO₂ + ALN), it was observed an increase in expression (approximately sixfold change) when compared to the control. Altogether, our data clearly showed that the bisphosphonate-biofunctionalized surface enhanced the biocompatibility of titanium and claims to further progress preclinical in vivo experimentation.

OsteoBLAST: Computational Routine of Global Molecular Analysis Applied to Biomaterials Development

For bone purposes, surface modifications are a common trend in biomaterials research aiming to reduce the time necessary for osteointegration, culminating in faster recovery of patients. In this scenario, analysis of intracellular signaling pathways have emerged as an important and reliable strategy to predict biological responses from in vitro approaches. We have combined global analysis of intracellular protein phosphorylation, systems biology and bioinformatics into an early biomaterial analysis routine called OsteoBLAST. We employed the routine as follows: the PamChip tyrosine kinase assay was applied to mesenchymal stem cells grown on three distinct titanium surfaces: machined, dual acid-etched and nanoHA. Then, OsteoBLAST was able to identify the most reliable spots to further obtain the differential kinome profile and finally to allow a comparison among the different surfaces. Thereafter, NetworKIN, STRING, and Cytoscape were used to build and analyze a supramolecular protein-protein interaction network, and DAVID tools identified biological signatures in the differential kinome for each surface.

The Impact of Bioactive Surfaces in the Early Stages of Osseointegration: An In Vitro Comparative Study Evaluating the HAnano® and SLActive® Super Hydrophilic Surfaces

There is an increased effort on developing novel and active surfaces in order to accelerate their osteointegration, such as nanosized crystalline hydroxyapatite coating (HAnano®). To better understand the biological behavior of osteoblasts grown on HAnano® surface, the set of data was compared with SLActive®, a hydrophilic sandblasted titanium surface. Methodologically, osteoblasts were seeded on both surfaces up to 72 hours, to allow evaluating cell adhesion, viability, and set of genes encoding proteins related with adhesion, proliferation, and differentiation. Our data shows HAnano® displays an interesting substrate to support cell adhesion with typical spread morphologic cells, while SLActive®-adhering cells presented fusiform morphology. Our data shows that the cellular adhesion mechanism was accompanied with upexpression of integrin β1, Fak, and Src, favoring the assembling of focal adhesion platforms and coupling cell cycle progression (upmodulating of Cdk2, Cdk4, and Cdk6 genes) in response to HAnano®. Additionally, both bioactive surfaces promoted osteoblast differentiation stimulus, by activating Runx2, Osterix, and Alp genes. Although both surfaces promoted Rankl gene expression, Opg gene expression was higher in SLActive® and this difference reflected on the Rankl/Opg ratio. Finally, Caspase1 gene was significantly upmodulated in response to HAnano® and it suggests an involvement of the inflammasome complex. Collectively, this study provides enough evidences to support that the nanohydroxyapatite-coated surface provides the necessary microenvironment to drive osteoblast performance on dental implants and these stages of osteogenesis are expected during the early stages of osseointegration.

Obesity/Metabolic Syndrome and Diabetes Mellitus on Peri-implantitis

Literature has reported that up to 50% of dental implants may be affected by peri-implantitis, a bacteria-induced chronic inflammatory process, which promotes osteoclast-mediated bone resorption and inhibits bone formation, leading to progressive bone loss around implants. Current evidence points toward an increased risk for the development of peri-implantitis in both obesity/metabolic syndrome (MetS) and diabetes mellitus (DM) conditions relative to the healthy population. Currently, there is no effective treatment for peri-implantitis and the 50% prevalence in MetS and DM, along with its predicted increase in the worldwide population, presents a major concern in implant dentistry as hyperglycemic conditions are associated with bone-healing impairment; this may be through dysfunction of osteocalcin-induced glucose metabolism. The MetS/DM proinflammatory systemic condition and altered immune/microbiome response affect both catabolic and anabolic events of bone-healing that include increased osteoclastogenesis and compromised osteoblast activity, which could be explained by the dysfunction of insulin receptor that led to activation of signals related with osteoblast differentiation. Furthermore, chronic hyperglycemia along with associated micro- and macro-vascular ailments leads to delayed/impaired wound healing due to activation of pathways that are particularly important in initiating events linked to inflammation, oxidative stress, and cell apoptosis; this may be through deactivation of AKT/PKB protein, which possesses a pivotal role in drive survival and eNOS signaling. This review presents an overview of the local and systemic mechanisms synergistically affecting bone-healing impairment in MetS/DM individuals, as well as a rationale for hierarchical animal model selection, in an effort to characterize peri-implantitis disease and treatment.

Pregnane X receptor activation constrains mucosal NF-κB activity in active inflammatory bowel disease

Background

The Pregnane X Receptor (PXR) is a principal signal transducer in mucosal responses to xenobiotic stress. It is well-recognized that inflammatory bowel disease is accompanied by xenobiotic stress, but the importance of the PXR in limiting inflammatory responses in inflammatory bowel disease remains obscure at best.

Methods

We stimulate a total of 106 colonic biopsies from 19 Crohn’s disease patients with active disease, 36 colonic biopsies from 8 control patients, colonic organoids and various cell culture models (either proficient or genetically deficient with respect to PXR) in vitro with the PXR ligand rifampicin or vehicle. Effects on NF-κB activity are assessed by measuring interleukin-8 (IL-8) and interleukin-1ß (IL-1ß) mRNA levels by qPCR and in cell culture models by NF-κB reporter-driven luciferase activity and Western blot for signal transduction elements.

Results

We observe a strict inverse correlation between colonic epithelial PXR levels and NF-κB target gene expression in colonic biopsies from Crohn’s disease patients. PXR, activated by rifampicin, is rate-limiting for mucosal NF-κB activation in IBD. The correlation between colonic epithelial PXR levels and NF-κB target gene expression was also observed in intestinal organoids system. Furthermore, in preclinical in vitro models of intestinal inflammation, including intestinal organoids, genetic inactivation of PXR unleashes NF-κB-dependent signal transduction whereas conversely NF-κB signaling reduces levels of PXR expression.

Conclusions

Our data indicate that the PXR is a major and clinically relevant antagonist of NF-κB activity in the intestinal epithelial compartment during inflammatory bowel disease.

Layered Double Hydroxides Are Promising Nanomaterials for Tissue Bioengineering Application

Layered double hydroxides (LDHs) have emerged as promising nanomaterials for human health and although it has achieved some progress on this matter, their application within bioengineering is not fully addressed. This prompted to subject fibroblasts to two compositions of LDHs (Mg₂ Al-Cl and Zn₂ Al-Cl), considering an acute response. First, LDH particles are addressed by scanning electron microscopy, and no significant effect of the cell culture medium on the shape of LDHs particles is reported although it seems to adsorb some soluble proteins as proposed by energy-dispersive X-ray analysis. These LDHs release magnesium, zinc, and aluminum, but there is no cytotoxic or biocompatibility effects. The data show interference to fibroblast adhesion by driving the reorganization of actin-based cytoskeleton, preliminarily to cell cycle progression. Additionally, these molecular findings are validated by performing a functional wound-healing assay, which is accompanied by a dynamic extracellular matrix remodeling in response to the LDHs. Altogether, the results show that LDHs nanomaterials modulate cell adhesion, proliferation, and migration, delineating new advances on the biomaterial field applied in the context of soft tissue bioengineering, which must be explored in health disorders, such as wound healing in burn injuries.

Human mesenchymal stromal cells in adhesion to cell-derived extracellular matrix and titanium: Comparative kinome profile analysis

The extracellular matrix (ECM) physically supports cells and influences stem cell behaviour, modulating kinase-mediated signalling cascades. Cell-derived ECMs have emerged in bone regeneration as they reproduce physiological tissue-architecture and ameliorate mesenchymal stromal cell (MSC) properties. Titanium scaffolds show good mechanical properties, facilitate cell adhesion, and have been routinely used for bone tissue engineering (BTE). We analyzed the kinomic signature of human MSCs in adhesion to an osteopromotive osteoblast-derived ECM, and compared it to MSCs on titanium. PamChip kinase-array analysis revealed 63 phosphorylated peptides on ECM and 59 on titanium, with MSCs on ECM exhibiting significantly higher kinase activity than on titanium. MSCs on the two substrates showed overlapping kinome profiles, with activation of similar signalling pathways (FAK, ERK, and PI3K signalling). Inhibition of PI3K signalling in cells significantly reduced adhesion to ECM and increased the number of nonadherent cells on both substrates. In summary, this study comprehensively characterized the kinase activity in MSCs on cell-derived ECM and titanium, highlighting the role of PI3K signalling in kinomic changes regulating osteoblast viability and adhesion. Kinome profile analysis represents a powerful tool to select pathways to better understand cell behaviour. Osteoblast-derived ECM could be further investigated as titanium scaffold-coating to improve BTE.

The role of triiodothyronine hormone and mechanically-stressed endothelial cell paracrine signalling synergism in gene reprogramming during hBMSC-stimulated osteogenic phenotype in vitro

We therefore investigated whether there is synergism between triiodothyronine (T3) hormone and trophic molecules released from mechanically-stressed endothelial cells (EC-enriched medium) in osteogenic phenotype by mapping classical repertory of genes. Although there are studies reporting the efficiency of T3 hormone on bone cells, it is scarce considering their effect in conjunction with other physiologically active molecules, such as those released by the active endothelial cells. To address this issue, human bone marrow-derived mesenchymal stem cells (hBMSCs) were treated with EC-enriched medium subjected to shear-stress up to 72 h in vitro, in conjunction or not with T3 hormone. Although our results found an important synergism considering these parameters on modulating key bone-related gene markers, such as on the alkaline phosphatase (ALP) behavior (at both mRNA and protein content), contributing for osteoblast differentiation, important genes such as OSTERIX and RUNX2 were significantly down-expressed, while a over-expression of RANKL was found when the conjunction effect of T3 and endothelial paracrine signaling was considered. In addition, T3 hormone over expressed both OCT4 and NANOG genes in a DNA epigenetic-independent manner. However, we observed a dynamic reprogramming of DNMT1, DNMT3A, DNMT3B and TET1, important DNA-related epigenetic markers. Specifically, T3 hormone alone up-modulated TET2 transcripts profile. Complimentarily, expression of microRNA (miRs) processing-related genes also was modulated, as well as miR-10b, miR-22, miR-21, miR-143 and miR-145 transcriptional related profiles. Altogether, our results suggested a positive effect of mechanically-stressed endothelial cells-induced paracrine signaling on T3 hormone-obtaining osteogenic phenotype, contributing to understanding the paradoxal effect of T3 hormone on the bone physiology.

Titanium-enriched medium drives low profile of ECM remodeling as a pre-requisite to pre-osteoblast viability and proliferative phenotype

Titanium is widely used for biomedical applications, but little information is being delivered regarding the cellular/molecular mechanisms explaining their efficacy, mainly considering the effects of the Ti-released trace elements on pre-osteoblasts. We addressed this issue by investigating decisive intracellular signal transduction able to modulate cytoskeleton rearrangement, proliferative phenotype and extracellular matrix (ECM) remodeling. We considered titanium grades IV and V, submitted or not to dual acid-etching (w/DAE or wo/DAE, respectively). Our results showed there is no cytotoxicity, preserving AKT involvement. Additionally, Ti-enriched medium promoted a diminution of the downstream signaling upon integrin activation (phosphorylating Rac1 and cofilin), guaranteeing a dynamic cytoskeleton rearrangement. Moreover, the low profile of ECM remodeling obtained in response to trace molecules released by Ti-based devices seems contributing to the osteoblast performance in mediating extracellular support to cell anchorage. This hypothesis was validated by the up-expression of ß1-integrin, src and Focal adhesion kinase (fak) genes, mainly in response to titanium grade V. Proliferative phenotype showed an unbalance between cyclin-dependent kinases (CDKs) and p15^INK4b/p21^Cip1. In conjunction, we showed for the first time that trace elements from Ti-based biomedical devices provoke important modulation of the osteoblast biology, driving cell anchoring, viability, and proliferative phenotype. Certainly, these biological outcomes compromise implant osseointegration.

Titanium-released from dental implant enhances pre-osteoblast adhesion by ROS modulating crucial intracellular pathways

It is important to understand the cellular and molecular events that occur at the cell-material interface of implants used for bone repair. The mechanisms involved in the initial stages of osteoblast interactions with the surface of the implant material must be decisive for cell fating surrounding them. In order to address this issue, we decided to investigate if conditioned medium for dental implants was able to modulate murine pre-osteoblast metabolism. First, we determined the concentration of titanium (Ti)-containing conditioned medium and found that it was 2-fold increased (p < 0.0001). We have reported that this conditioned medium significantly up-modulated pre-osteoblast adhesion up to 24 h (p < 0.0001). In parallel, our results showed that both phosphorylations of FAK (focal adhesion kinase) at Y397 (p < 0.0011) and Cofilin at Ser03 (p < 0.0053) were also up-modulated, as well as for Rac1 expression (p < 0.0175); both of them are involved with cell adaptation by rearranging cytoskeleton actin filaments. Thereafter, Ti-containing medium stimulated ROS (reactive oxygen species) production by pre-osteoblast cells, and it is very possible that ROS compromised PTP-1B (protein tyrosine phosphatase 1B) activation since PTP1B was down-phosphorylated (p < 0.0148). The low PTP activity guarantees the phosphorylation of FAK at Y-residue, causing better pre-osteoblast adhesion in response to Ti-containing medium. Altogether, these data indicate that ROS indirectly modulate FAK phosphorylation in response to Ti-released from dental implants. Taken the results in account, these data showed for the first time that the implanted dental device is able to dynamically affect surrounding tissues, mainly by promoting a better performance of the pre-osteoblast cells. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2968-2976, 2017.

TiO2nanotubes enriched with calcium, phosphorous and zinc: promising bio-selective functional surfaces for osseointegrated titanium implants

TiO₂nanotubes enriched with Ca, P, and Zn by reverse polarization anodization, are promising bio-selective functional structures for osseointegrated titanium implants.

Bone Morphogenetic Proteins: Promising Molecules for Bone Healing, Bioengineering, and Regenerative Medicine

Bone morphogenetic proteins (BMPs), glycoproteins secreted by some cells, are members of the TGF-β superfamily that have been implicated in a wide variety of roles. Currently, about 20 different BMPs have been identified and grouped into subfamilies, according to similarities with respect to their amino acid sequences. It has been shown that BMPs are secreted growth factors involved in mesenchymal stem cell differentiation, also being reported to control the differentiation of cancer stem cells. BMPs initiate signaling from the cell surface by binding to two different receptors (R: Type I and II). The heterodimeric formation of type I R and II R may occur before or after BMP binding, inducing signal transduction pathways through SMADs. BMPs may also signal through SMAD-independent pathways via mitogen-activated protein kinases (ERK, p38MAPKs, JNK). BMPs may act in an autocrine or paracrine manner, being regulated by specific antagonists, namely: noggin and chordin. Genetic engineering allows the production of large amounts of BMPs for clinical use, and clinical trials have shown the benefits of FDA-approved recombinant human BMPs 2 and 7. Several materials from synthetic to natural sources have been tested as BMP carriers, ranging from hydroxyapatite, and organic polymers to collagen. Bioactive membranes doped with BMPs are promising options, acting to accelerate and enhance osteointegration. The development of smart materials, mainly based on biopolymers and bone-like calcium phosphates, appears to provide an attractive alternative for delivering BMPs in an adequately controlled fashion. BMPs have revealed a promising future for the fields of Bioengineering and Regenerative Medicine. In this chapter, we review and discuss the data on BMP structure, mechanisms of action, and possible clinical applications.

Osseointegration of Plateau Root Form Implants: Unique Healing Pathway Leading to Haversian-Like Long-Term Morphology

Endosteal dental implants have been utilized as anchors for dental and orthopedic rehabilitations for decades with one of the highest treatment success rates in medicine. Such success is due to the phenomenon of osseointegration where after the implant surgical placement, bone healing results into an intimate contact between bone and implant surface. While osseointegration is an established phenomenon, the route which osseointegration occurs around endosteal implants is related to various implant design factors including surgical instrumentation and implant macro, micro, and nanometer scale geometry. In an implant system where void spaces (healing chambers) are present between the implant and bone immediately after placement, its inherent bone healing pathway results in unique opportunities to accelerate the osseointegration phenomenon at the short-term and its maintenance on the long-term through a haversian-like bone morphology and mechanical properties.

Effects of caffeic acid phenethyl ester on wound healing in calvarial defects

OBJECTIVE

The aim of this study is to analyze histologically the effect of CAPE on bone healing of Critical Size Defect (CSD) in rat calvaria.

STUDY DESIGN

Thirty-two 3-month-old male rats were used. The animals were randomly divided into four groups. Group A received isotonic saline solution, Group B received CAPE (50 mmol/kg) locally, Group C received CAPE (100 mmol/kg) locally and Group D received CAPE (10 mmol/kg/day i.p. for 28 days) systematically. A 5-mm diameter calvarial defect was created in the right side of the parietal bone without damaging the underlying dura mater. Twenty-eight days after the surgery, all the animals were sacrificed. The original defect area was removed from the animal's calvarium bone en bloc. Beginning at the center of the surgical defect, serial sections of 6 µm thick were cut longitudinally. The sections were stained with hematoxylin and eosin for analysis under a light microscope. The sections were analyzed for the presence of inflammatory infiltrate, connective tissue formation and new bone formation. Computer-assisted histomorphometic measurements were carried out with an automated image analysis system.

RESULTS

The total new bone areas were significantly greater in group D than in all groups and group C was statistically insignificant from the other groups (p < 0.05). Group B had a greater, but not statistically significant (p > 0.05), amount of total regenerated bone area than the control group.

CONCLUSION

The results indicate that 100 mmol/kg topical and 10 mmol/kg/day systemic application of CAPE increases bone healing, especially with systemic application.

Osseointegration: hierarchical designing encompassing the macrometer, micrometer, and nanometer length scales

OBJECTIVE

Osseointegration has been a proven concept in implant dentistry and orthopedics for decades. Substantial efforts for engineering implants for reduced treatment time frames have focused on micrometer and most recently on nanometer length scale alterations with negligible attention devoted to the effect of both macrometer design alterations and surgical instrumentation on osseointegration. This manuscript revisits osseointegration addressing the individual and combined role of alterations on the macrometer, micrometer, and nanometer length scales on the basis of cell culture, preclinical in vivo studies, and clinical evidence.

METHODS

A critical appraisal of the literature was performed regarding the impact of dental implant designing on osseointegration. Results from studies with different methodological approaches and the commonly observed inconsistencies are discussed.

RESULTS

It is a consensus that implant surface topographical and chemical alterations can hasten osseointegration. However, the tailored combination between multiple length scale design parameters that provides maximal host response is yet to be determined.

SIGNIFICANCE

In spite of the overabundant literature on osseointegration, a proportional inconsistency in findings hitherto encountered warrants a call for appropriate multivariable study designing to ensure that adequate data collection will enable osseointegration maximization and/or optimization, which will possibly lead to the engineering of endosteal implant designs that can be immediately placed/loaded regardless of patient dependent conditions.

Cellular behavior as a dynamic field for exploring bone bioengineering: a closer look at cell-biomaterial interface

Bone is a highly dynamic and specialized tissue, capable of regenerating itself spontaneously when afflicted by minor injuries. Nevertheless, when major lesions occur, it becomes necessary to use biomaterials, which are not only able to endure the cellular proliferation and migration, but also to substitute the original tissue or integrate itself to it. With the life expectancy growth, regenerative medicine has been gaining constant attention in the reconstructive field of dentistry and orthopedy. Focusing on broadening the therapeutic possibilities for the regeneration of injured organs, the development of biomaterials allied with the applicability of gene therapy and bone bioengineering has been receiving vast attention over the recent years. The progress of cellular and molecular biology techniques gave way to new-guided therapy possibilities. Supported by multidisciplinary activities, tissue engineering combines the interaction of physicists, chemists, biologists, engineers, biotechnologist, dentists and physicians with common goals: the search for materials that could promote and lead cell activity. A well-oriented combining of scaffolds, promoting factors, cells, together with gene therapy advances may open new avenues to bone healing in the near future. In this review, our target was to write a report bringing overall concepts on tissue bioengineering, with a special attention to decisive biological parameters for the development of biomaterials, as well as to discuss known intracellular signal transduction as a new manner to be explored within this field, aiming to predict in vitro the quality of the host cell/material and thus contributing with the development of regenerative medicine.

Kinome profiling of osteoblasts on hydroxyapatite opens new avenues on biomaterial cell signaling

In degenerative diseases or lesions, bone tissue replacement and regeneration are important clinical goals. The most used bone substitutes today are hydroxyapatite (HA) scaffolds. These scaffolds, developed over the last few decades, present high porosity and good osteointegration, but haven't completely solved issues related to bone defects. Moreover, the exact intracellular mechanisms involved in the response to HA have yet to be addressed. This prompted us to investigate the protein networks responsible for signal transduction during early osteoblast adhesion on synthetic HA scaffolds. By performing a global kinase activity assay, we showed that there is a specific molecular machinery responding to HA contact, immediately triggering pathways leading to cytoskeleton rearrangement due to activation of Adducin 1 (ADD1), protein kinase A (PKA), protein kinase C (PKC), and vascular endothelial growth factor (VEGF). Moreover, we found a significantly increased phosphorylation of the activating site Ser-421 in histone deacetylase 1 (HDAC1), a substrate of Cyclin-Dependent Kinase 5 (CDK5). These phosphorylation events are hallmarks of osteoblast differentiation, pointing to HA surfaces ability to promote differentiation. We also found that AKT was kept active, suggesting the maintenance of survival pathways. Interestingly, though, the substrate sequence of CDK5 also presented higher phosphorylation levels when compared to control conditions. To our knowledge, this kinase has never before been related to osteoblast biology, opening a new avenue of investigation for novel pathways involved in this matter. These results suggest that HA triggers a specific intracellular signal transduction cascade during early osteoblast adhesion, activating proteins involved with cytoskeleton rearrangement, and induction of osteoblast differentiation.

Bone-Forming Capabilities of a Newly Developed NanoHA Composite Alloplast Infused with Collagen: A Pilot Study in the Sheep Mandible

Lateral or vertical bone augmentation has always been a challenge, since the site is exposed to constant pressure from the soft tissue, and blood supply only exists from the donor site. Although, for such clinical cases, onlay grafting with autogenous bone is commonly selected, the invasiveness of the secondary surgical site and the relatively fast resorption rate have been reported as a drawback, which motivated the investigation of alternative approaches. This study evaluated the bone-forming capability of a novel nanoHA alloplast infused with collagen graft material made from biodegradable polylactic acid/polyglycolic acid versus a control graft material with the same synthesized alloplast without the nanoHA component and collagen infiltration. The status of newly formed bone and the resorption of the graft material were evaluated at 6 weeks in vivo histologically and three dimensionally by means of 3D microcomputed tomography. The histologic observation showed that newly formed bone ingrowth and internal resorption of the block were observed for the experimental blocks, whereas for the control blocks less bone ingrowth occurred along with lower resorption rate of the block material. The three-dimensional observation indicated that the experimental block maintained the external geometry, but at the same time successfully altered the graft material into bone. It is suggested that the combination of numerous factors contributed to the bone ingrowth and the novel development could be an alternative bone grafting choice.

The impact of the RGD peptide on osteoblast adhesion and spreading on zinc-substituted hydroxyapatite surface

The incorporation of zinc into the hydroxyapatite structure (ZnHA) has been proposed to stimulate osteoblast proliferation and differentiation. Another approach to improve cell adhesion and hydroxyapatite (HA) performance is coating HA with adhesive proteins or peptides such as RGD (arginine-glycine-aspartic acid). The present study investigated the adhesion of murine osteoblastic cells to non-sintered zinc-substituted HA disks before and after the adsorption of RGD. The incorporation of zinc into the HA structure simultaneously changed the topography of disk's surface on the nanoscale and the disk's surface chemistry. Fluorescence microscopy analyses using RGD conjugated to a fluorescein derivative demonstrated that ZnHA adsorbed higher amounts of RGD than non-substituted HA. Zinc incorporation into HA promoted cell adhesion and spreading, but no differences in the cell density, adhesion and spreading were detected when RGD was adsorbed onto ZnHA. The pre-treatment of disks with fetal bovine serum (FBS) greatly increased the cell density and cell surface area for all RGD-free groups, overcoming the positive contribution of zinc to cell adhesion. The presence of RGD on the ZnHA surface impaired the effects of FBS pre-treatment possibly due to competition between FBS proteins and RGD for surface binding sites.

Exploring anorganic bovine bone granules as osteoblast carriers for bone bioengineering: a study in rat critical-size calvarial defects

It is known that current trends on bone bioengineering seek ideal scaffolds and explore innovative methods to restore tissue function. In this way, the objective of this study was to evaluate the behavior of anorganic bovine bone as osteoblast carrier in critical-size calvarial defects. MC3T3-E1 osteoblast cells (1x10(5) cells/well) were cultured on granules of anorganic bovine bone in 24-well plates and after 24 h these granules were implanted into rat critical-size calvarial defects (group Biomaterial + Cells). In addition, other groups were established with different fillings of the defect: Blood Clot (negative control); Autogenous Bone (positive control); Biomaterial (only granules) and Cells (only MC3T3-E1 cells). After 30 days, the animals were euthanized and the calvaria were technically processed in order to allow histological and morphometric analysis. It was possible to detect blood vessels, connective tissue and newly formed bone in all groups. Particularly in the Biomaterial + Cells group, it was possible to observe a profile of biological events between the positive control group (autogenous bone) and the group in which only anorganic bovine granules were implanted. Altogether, the results of the present study showed that granules of anorganic bovine bone can be used as carrier to osteoblasts and that adding growth factors at the moment of implantation should maximize these results.

Controlling multipotent stromal cell migration by integrating "course-graining" materials and "fine-tuning" small molecules via decision tree signal-response modeling

Biomimetic scaffolds have been proposed as a means to facilitate tissue regeneration by multi-potent stromal cells (MSCs). Effective scaffold colonization requires a control of multiple MSC responses including survival, proliferation, differentiation, and migration. As MSC migration is relatively unstudied in this context, we present here a multi-level approach to its understanding and control, integratively tuning cell speed and directional persistence to achieve maximal mean free path (MFP) of migration. This approach employs data-driven computational modeling to ascertain small molecule drug treatments that can enhance MFP on a given materials substratum. Using poly(methyl methacrylate)-graft-poly(ethylene oxide) polymer surfaces tethered with epidermal growth factor (tEGF) and systematically adsorbed with fibronectin, vitronectin, or collagen-I to present hTERT-immortalized human MSCs with growth factor and extracellular matrix cues, we measured cell motility properties along with signaling activities of EGFR, ERK, Akt, and FAK on 19 different substrate conditions. Speed was consistent on collagen/tEGF substrates, but low associated directional persistence limited MFP. Decision tree modeling successfully predicted that ERK inhibition should enhance MFP on collagen/tEGF substrates by increasing persistence. Thus, we demonstrated a two-tiered approach to control MSC migration: materials-based "coarse-graining" complemented by small molecule "fine-tuning".