Optimizing Toxic Chemical Removal through Defect-Induced UiO-66-NH2 Metal-Organic Framework

Engineering Porosity and Functionality in a Robust Twofold Interpenetrated Bismuth-Based MOF: Toward a Porous, Stable, and Photoactive Material

Defect engineering in metal-organic frameworks (MOFs) has gained worldwide research traction, as it offers tools to tune the properties of MOFs. Herein, we report a novel 2-fold interpenetrated Bi-based MOF made of a tritopic flexible organic linker, followed by missing-linker defect engineering. This procedure creates a gradually augmented micro- and mesoporosity in the parent (originally nonporous) network. The resulting MOFs can tolerate a remarkable extent of linker vacancy (with absence of up to 60% of linkers per Bi node) created by altering the crystal-growth rate as a function of synthesis temperature and duration. Owing to the enhanced porosity and availability of the uncoordinated Lewis acidic Bi sites, the defect-engineered MOFs manifested improved surface areas, augmented CO2 and water vapor uptake, and catalytic activity. Parallel to this, the impact of defect engineering on the optoelectronic properties of these MOFs has also been studied, offering avenues for new applications.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Tuning the pore chemistry of Zr-MOFs for efficient metal ion capture from complex streams

Metal-organic frameworks (MOFs) have shown promise for adsorptive separations of metal ions. Herein, MOFs based on highly stable Zr(IV) building units were systematically functionalized with targeted metal binding groups. Through competitive adsorption studies, it was shown that the selectivity for different metal ions was directly tunable through functional group chemistry.

Geometry and Chemistry: Influence of Pore Functionalization on Molecular Transport and Diffusion in Solvent-Filled Zirconium Metal-Organic Frameworks

Postsynthetic modification (PSM) of metal-organic frameworks (MOFs) enables incorporation of diverse functionalities in pores for chemical separations, drug delivery, and heterogeneous catalysis. However, the effect of PSM on molecular transport, which is essential for most applications of MOFs, has been rarely studied. In this paper, we used perfluoroalkane-functionalized Zr-MOF NU-1008 as a platform to systematically interrogate transport processes and mechanisms in solvated pores. We anchored perfluoroalkanes onto NU-1008 nodes by solvent-assisted ligand incorporation (SALI-n, with n = 3, 5, 7, and 9 denoting the number of fluorinated carbons). Transport of a luminescent molecule, BODIPY, through individual crystallites of four versions of methanol-filled SALI-n was monitored by confocal fluorescence microscopy as a function of time and location. In comparison with the parent NU-1008, the diffusivity of the probe molecules within SALI-n declined by 2- to 7-fold depending on chain length and loading, presumably due to the reduction in pore diameter or adsorptive interactions with perfluoroalkyl chains. Atomistic simulations were performed to uncover the microscopic behavior of the BODIPY diffusion in SALI-n. The perfluoroalkyl chains are observed to stay close to the pore walls, instead of extending toward the pore center. BODIPY molecules, which preferably interact with linkers, were pushed to the interior of the channels as the chain length increased, resulting in solvated diffusion and minor differences in the short-time mobility of BODIPY in SALI-n. This suggested that the observed decline of transport diffusivity in SALI-n mainly stemmed from the reduction in the pore size when these flexible chains are present. We anticipate that this proof of concept will assist in understanding how pore functionalization can physically and chemically affect mass transport in MOFs and will be useful in further guiding the design of PSM to realize the optimal performance of MOFs for various applications.

Defective MOF-74 with ancillary open metal sites for the enhanced adsorption of chemical warfare agent simulants

The development of effective porous adsorbents plays a vital role in eliminating hazardous substances from the environment. Toxic chemicals, including chemical warfare agents (CWAs), pose significant risks to both humans and ecosystems, highlighting the urgency to create efficient porous adsorbents. Therefore, substantial attention has been directed towards advancing adsorption techniques for the successful eradication of CWAs from the environment. Herein, we demonstrate a rational approach for enhancing the adsorption capability of a porous metal-organic framework (MOF) by employing ancillary open metal sites within the MOF structure. To generate defective MOF-74 (D-MOF-74) with ancillary open metal sites, some of the 2,5-dihydroxy-1,4-bezenedicarboxylic acid (DHBDC) linkers originally present in the MOF-74 structure were replaced with 1,4-benzenedicarboxylic acid (BDC) linkers. The absence of hydroxyl groups in the BDC linkers compared to the original DHBDC linkers creates ancillary open metal sites, which enhance the adsorption ability of D-MOF-74 for CWA simulants such as dimethyl methyl phosphonate, 2-chloroethyl ethyl sulfide, and methyl salicylate by providing effective interaction sites for the targeted molecules. However, excessive creation of open metal sites causes the collapse of the originally well-developed MOF-74 structure, resulting in a substantial reduction in its empty space and a subsequent decline in adsorption efficiency. Thus, to produce a defective MOF with the best performance, it is necessary to replace an appropriate amount of organic linker and create suitable open metal sites. Moreover, D-MOF-74 displays excellent recyclability during consecutive adsorption cycles without losing its original structure and morphology, suggesting that D-MOF-74 is an effective and stable material for the removal of CWA simulants.

Aramid nanofibers supported metal-organic framework aerogel for protection of chemical warfare agent

Protective fabrics containing Zr-Based Metal-Organic Frameworks (Zr-MOFs) show great potential in the detoxification of chemical warfare agents (CWAs). However, the current studies still face the challenges of complicated fabrication processes, limited MOF loading mass, and insufficient protection. Herein, we developed a lightweight, flexible and mechanical robust aerogel by in situ growth of UiO-66-NH₂ onto aramid nanofibers (ANFs) and assembly of UiO-66-NH₂ loaded ANFs (UiO-66-NH₂@ANFs) into 3D hierarchically porous architecture. The UiO-66-NH₂@ANF aerogels feature high MOF loading of 261 %, high surface area of 589.349 m² g^-1, open and interconnected cellular structure, which provide efficient transfer channels and promote catalytic degradation of CWAs. As a result, the UiO-66-NH₂@ANF aerogels demonstrate high 2-chloroethyl ethyl thioether (CEES) removal rate at 98.9 % and a short half-life of 8.15 min. Moreover, the aerogels present good mechanical stability (recovery rate of 93.3 % after 100 cycles under 30 % strain), low thermal conductivity (λ of 25.66 mW m^-1 K^-1), high flame resistance (LOI of 32 %) and good wearing comfortableness, indicating promising potential in multifunctional protection against CWAs.

Low-temperature propane oxidative dehydrogenation over UiO-66 supported vanadia catalysts: Role of support confinement effects

Overoxidation is the principal barrier against commercializing propane oxidative dehydrogenation (PODH) catalysts for propylene production. The current approach to reducing overoxidation, i.e., coating the non-selective support surface with a monolayer of active phase, can itself increase the probability of overoxidation of the produced propylene due to polymerization of active phase species. Incorporating the "confinement agents" onto the metal oxide support might be considered as an alternative solution to prevent hydrocarbons from reaching the support and overoxidizing. Herein, the UiO-66 metal-organic framework, which contains numerous organic ligands connected to the zirconia nodes, was used as support for the vanadia active phase to highlight the role of support's confinement effects on the overall catalytic performance toward the PODH. The UiO-66 supported vanadia catalysts with various vanadium loadings were fabricated via an ultrasonic-assisted wet impregnation procedure. The catalytic function is related to the underlying chemical processes at catalyst surfaces using physicochemical characterization techniques, PODH performance measurements, and machine learning tools. The results showed that the catalyst with a relatively low vanadia density of 2.7 nm-2, equivalent to less than half of the entire support surface coverage, could achieve propylene productivity of 4.43 [Formula: see text] , propane conversion of 17.1%, and propylene selectivity of 49.7% at 350 °C.

Reactive Chlorine Capture by Dichlorination of Alkene Linkers in Metal-Organic Frameworks

Chlorine (Cl₂) is a toxic and corrosive gas that is both an essential reagent in industry and a potent chemical warfare agent. Materials that can strongly bind Cl₂ at low pressures are essential for industrial and civilian personal protective equipment (PPE). Herein, we report the first examples of irreversible Cl₂ capture via the dichlorination of alkene linkages in Zr-based metal-organic frameworks. Frameworks constructed from fumarate (Zr-fum) and stilbene (Zr-stilbene) linkers retain long-range order and accessible porosity after alkene dichlorination. In addition, energy-dispersive X-ray spectroscopy reveals an even distribution of Cl throughout both materials after Cl₂ capture. Cl₂ uptake experiments reveal high irreversible uptake of Cl₂ (>10 wt %) at low partial pressures (<100 mbar), particularly in Zr-fum. In contrast, traditional porous carbons mostly display reversible Cl₂ capture, representing a continued risk to users after exposure. Overall, our results support that alkene dichlorination represents a new pathway for reactive Cl₂ capture, opening new opportunities for binding this gas irreversibly in PPE.

A comprehensive review on water remediation using UiO-66 MOFs and their derivatives

Metal-organic frameworks (MOFs) are a versatile class of porous materials offering unprecedented scope for chemical and structural tunability. On account of their synthetic versatility, tunable and exceptional host-guest chemistry they are widely utilized in many prominent water remediation techniques. However, some of the MOFs present low structural stabilities specifically in aqueous and harsh chemical conditions which impedes their potential application in the field. Among the currently explored MOFs, UiO-66 exhibits structural robustness and has gained immense scientific popularity. Built with a zirconium-terephthalate framework, the strong Zr-O bond coordination contributes to its stability in aqueous, chemical, and thermal conditions. Moreover, other exceptional features such as high surface area and uniform pore size add to the grand arena of porous nanomaterials. As a result of its stable nature, UiO-66 offers relaxed admittance towards various functionalization, including synthetic and post-synthetic modifications. Consequently, the adsorptive properties of these highly stable frameworks have been modulated by the addition of various functionalities. Moreover, due to the presence of catalytically active sites, the use of UiO-66 has also been extended towards the degradation of pollutants. Furthermore, to solve the practical handling issues of the crystalline powdered forms, UiO-66 has been incorporated into various membrane supports. The incorporation of UiO-66 in various matrices has enhanced the rejection, permeate flux, and anti-fouling properties of membranes. The combination of such exceptional characteristics of UiO-66 MOF has expanded its scope in targeted purification techniques. Subsequently, this review highlights the role of UiO-66 in major water purification techniques such as adsorption, photocatalytic degradation, and membrane separation. This comprehensive review is expected to shed light on the existing developments and guide the inexhaustible futuristic scope of UiO-66 MOF.

Fabrication of a Reusable Carbon Dot/Gold Nanoparticle/Metal-Organic Framework Film for Fluorescence Detection of Lead Ions in Water

Solid-state sensing platforms are desirable for the development of reusable sensors to promote public health measures such as testing for drinking water contamination. A bioinspired metal-organic framework (MOF)-based material has been developed by imitating metal-protein interactions in biological systems to attain high sensitivity and selectivity to Pb²⁺ through fluorescence sensing. A zirconium terephthalate-type framework (also known as NH₂-UiO-66) was modified with both gold nanoparticles and thiol-functionalized carbon dots to give HS-C/Au(x)/UiO-66 composites with different Au content (x) and were subsequently adapted into films that show extraordinary sensitivity to Pb²⁺. The HS-C/Au(1.4)/UiO-66 film that consists of 1.4 wt % Au shows a quenching response with the limit of detection of 80 parts per trillion and sustained performance for five cycles. Moreover, the fluorescence response of the HS-C/Au(x)/UiO-66 film to Pb²⁺ can be reversed from emission quenching to enrichment of fluorescence by increasing the Au content. The performance of the HS-C/Au(x)/UiO-66 film as a solid-state sensor demonstrates its potential for application in reusable sensing devices to ensure public safety from Pb²⁺ contamination in drinking water.

Synthesis of a UiO-66/g-C3N4 composite using terephthalic acid obtained from waste plastic for the photocatalytic degradation of the chemical warfare agent simulant, methyl paraoxon

In our study, Zr-based UiO-66 (Zr) was synthesized using terephthalic acid obtained from waste plastic. Thereafter, UiO-66/g-C₃N₄ composites were prepared by the solvothermal method, and their photocatalytic activity in the photodegradation of the chemical warfare agent simulant, dimethyl 4-nitrophenyl phosphate (DMNP), was evaluated. The as-synthesized UiO-66/g-C₃N₄ exhibited a high surface area (1440 m² g⁻¹) and a high capillary volume (1.49 cm³ g⁻¹). The UiO-66/g-C₃N₄ samples absorbed a visible light band with bandgap energies of 2.13–2.88 eV. The as-synthesized UiO-66/g-C₃N₄ composites exhibited highly efficient degradation of DMNP with a short half-life (t_1/2 of 2.17 min) at pH 7 under visible light irradiation. The trapping experiments confirmed that the h⁺ and ˙O₂⁻ radicals played an important role in the photocatalytic degradation of DMNP. The UiO-66/g-C₃N₄ catalyst simultaneously performed two processes: the hydrolysis and photocatalytic oxidation of DMNP in water. During irradiation, a p–n heterojunction between UiO-66 and g-C₃N₄ restricted the recombination of photogenerated electrons and holes, resulting in the enhancement in the degradation rate of DMNP.

UiO-66/g-C₃N₄ with a high surface area (1440 m² g⁻¹) and a high capillary volume (1.49 cm³ g⁻¹) exhibited highly efficient degradation of dimethyl 4-nitrophenyl phosphate with t_1/2 = 2.17 min.

Strategies for induced defects in metal-organic frameworks for enhancing adsorption and catalytic performance

Metal-organic frameworks (MOFs) have emerged among porous materials. The designable structure and specific functionality make them stand out for diverse applications. In conceptual MOF, the metal ions/clusters and organic ligands...

Enhanced Adsorption and Mass Transfer of Hierarchically Porous Zr-MOF Nanoarchitectures toward Toxic Chemical Removal

Zirconium-based metal-organic frameworks (Zr-MOFs) have shown tremendous prospects as highly efficient adsorbents against toxic chemicals under ambient conditions. Here, we report for the first time the enhanced toxic chemical adsorption and mass transfer properties of hierarchically porous Zr-MOF nanoarchitectures. A general and scalable sol-gel-based strategy combined with facile ambient pressure drying (APD) was utilized to construct MOF-808, MOF-808-NH₂, and UiO-66-NH₂ xerogel monoliths, denoted as G808, G808-NH₂, and G66-NH₂, respectively. The resulting Zr-MOF xerogels demonstrated 3D porous networks assembled by nanocrystal aggregates, with substantially higher mesoporosities than the precipitate analogues. Microbreakthrough tests on powders and tube breakthrough experiments on engineered granules were conducted at different relative humidities to comprehensively evaluate the NO₂ adsorption capabilities. The Zr-MOF xerogels showed considerably better NO₂ removal abilities than the precipitates, whether intrinsically or under simulated respirator canister/protection filter environment conditions. Multiple physicochemical characterizations were conducted to illuminate the NO₂ filtration mechanisms. Analysis on adsorption kinetics and mass transfer patterns in Zr-MOF xerogels was further performed to visualize the underlying structure-activity relationship using the gravimetric uptake and zero length column methods with cyclohexane and acetaldehyde as probes. The results revealed that the synergy of hierarchical porosities and nanosized crystals could effectively expedite the intracrystalline diffusion for the G66-NH₂ xerogel as well as alleviate the surface resistance for the G808-NH₂ xerogel, which led to accelerated overall adsorption uptake and thus enhanced performance toward toxic chemical removal.

Defect Level and Particle Size Effects on the Hydrolysis of a Chemical Warfare Agent Simulant by UiO-66

Defect engineering in metal-organic frameworks (MOFs) has recently become an area of significant research due to the possibility of enhancing material properties such as internal surface area and catalytic activity while maintaining stable 3D structures. Through a modulator screening study, the model Zr⁴⁺ MOF, UiO-66, has been synthesized with control of particle sizes (100-1900 nm) and defect levels (2-24%). By relating these properties, two series were identified where one property remained constant, allowing for independent analysis of the defect level or particle size, which frequently change coincident with the modulator choice. The series were used to compare UiO-66 reactivity for the hydrolysis of a chemical warfare agent simulant, dimethyl 4-nitrophenylphosphate (DMNP). The rate of DMNP hydrolysis displayed high dependence on the external surface area, supporting a reaction dominated by surface interactions. Moderate to high concentrations of defects (14-24%) allow for the accessibility of some interior MOF nodes but do not substantially promote diffusion into the framework. Individual control of defect levels and particle sizes through modulator selection may provide useful materials for small molecular catalysis and provide a roadmap for similar engineering of other zirconium frameworks.

UiO-66-NH2 Fabrics: Role of Trifluoroacetic Acid as a Modulator on MOF Uniform Coating on Electrospun Nanofibers and Efficient Decontamination of Chemical Warfare Agent Simulants

Protective fabrics with air-permeable and flexible features are crucial for practical application in the detoxification of chemical warfare agents (CWAs). Zr-based metal-organic frameworks (Zr-MOFs) are desirable to exhibit outstanding degradation toward CWAs. However, generally, MOFs with powders cannot afford the utilization as a protective layer directly; meanwhile, it is still a puzzling challenge to integrate MOFs with textiles efficiently. Herein, we develop a scalable and controllable strategy to fabricate UiO-66-NH₂ on electrospun polyacrylonitrile nanofibers (UiO-66-NH₂ fabrics) firmly and uniformly to capture and catalyze 2-chloroethyl ethyl sulfide (CEES) effectively for self-detoxification. The obtained UiO-66-NH₂ fabrics are greatly capable of specific surface area, ample porosity, excellent crystallinity, and abundant catalytic active sites. Consequently, CEES can be removed efficiently up to 97.7% after 48 h by reaction and adsorption. The degradation products mainly including ethyl-2-hydroxyethyl sulfide, ether, bis[2-(ethylthio)ethyl], and 2-(2-(ethylthio)ethylamino) terephthalic acid are detected. Moreover, the obtained nanofibrous fabrics possess air-permeable, washable, and flexible as well as lightweight merits, totally ensuring their promising engineering applications for protective clothing.

UiO-66-NH2 and Zeolite-Templated Carbon Composites for the Degradation and Adsorption of Nerve Agents

Composites of metal-organic frameworks and carbon materials have been suggested to be effective materials for the decomposition of chemical warfare agents. In this study, we synthesized UiO-66-NH2/zeolite-templated carbon (ZTC) composites for the adsorption and decomposition of the nerve agents sarin and soman. UiO-66-NH2/ZTC composites with good dispersion were prepared via a solvothermal method. Characterization studies showed that the composites had higher specific surface areas than pristine UiO-66-NH2, with broad pore size distributions centered at 1-2 nm. Owing to their porous nature, the UiO-66-NH2/ZTC composites could adsorb more water at 80% relative humidity. Among the UiO-66-NH2/ZTC composites, U0.8Z0.2 showed the best degradation performance. Characterization and gas adsorption studies revealed that beta-ZTC in U0.8Z0.2 provided additional adsorption and degradation sites for nerve agents. Among the investigated materials, including the pristine materials, U0.8Z0.2 also exhibited the best protection performance against the nerve agents. These results demonstrate that U0.8Z0.2 has the optimal composition for exploiting the degradation performance of pristine UiO-66-NH2 and the adsorption performance of pristine beta-ZTC.

In Situ Nuclear Magnetic Resonance Investigation of Molecular Adsorption and Kinetics in Metal-Organic Framework UiO-66

Thermodynamic and kinetic properties of molecular adsorption and transport in metal-organic frameworks (MOFs) are crucially important for many applications, including gas adsorption, filtration, and remediation of harmful chemicals. Using the in situ ¹H nuclear magnetic resonance (NMR) isotherm technique, we measured macroscopic thermodynamic and kinetic properties such as isotherms and rates of mass transfer while simultaneously obtaining microscopic information revealed by adsorbed molecules via NMR. Upon investigating isopropyl alcohol adsorption in MOF UiO-66 by in situ NMR, we obtained separate isotherms for molecules adsorbed at distinct environments exhibiting distinct NMR characteristics. A mechanistic view of the adsorption process is obtained by correlating such resolved isotherms with the cage structure effect on the nucleus-independent chemical shift, molecular dynamics such as the crowding effect at high loading levels, and the loading level dependence of the mass transfer rate as measured by NMR and elucidated by classical Monte Carlo simulations.

Microwave-Assisted Solvothermal Synthesis of UiO-66-NH2 and Its Catalytic Performance toward the Hydrolysis of a Nerve Agent Simulant

Zr-containing metal-organic frameworks (MOFs) exhibit a good performance of catalyzing the hydrolysis of chemical warfare agents, which is closely related to the size of MOF particles and its defects, but these two factors are often intertwined. In this article, we synthesized UiO-66-NH2 nanoparticles using a microwave-assisted hydrothermal method. By using a new modulator 4-Fluoro-3-Formyl-Benzoic Acid (FFBA) in different proportions, MOF particles with the same defect degree but different scales and those with similar sizes but different defect degrees can be obtained. The performance of the obtained MOF particles to catalyze the hydrolysis of the nerve agent simulant, dimethyl 4-nitrophenyl phosphate (DMNP), was investigated, and the effects of single factors of size or defect were compared for the first time. As the size of the obtained MOF particles increased from 81 nm to 159 nm, the catalytic degradation efficiency toward DMNP gradually decreased, and the half-life increased from 3.9 min to 11.1 min. For MOFs that have similar crystal sizes, the catalytic degradation half-life of MOF3 is only 5 min, which is much smaller than that of MOF5 due to the defects increase from 1.2 to 1.8 per Zr6 cluster.

Photothermal graphene/UiO-66-NH2 fabrics for ultrafast catalytic degradation of chemical warfare agent simulants

Lightweight and wearable fabrics with rapid self-detoxification functions are highly desired to resist chemical warfare agents (CWAs). Metal organic frameworks (MOFs) with high specific surface area and customizability are singularly attractive because of their ability to effectively capture and catalytically degrade CWAs. Herein, photothermal graphene-based nanocomposite fabrics are designed by wet-spinning and chemical reduction of graphene oxide fibers followed by in situ growth of UiO-66-NH₂. The flexible graphene fabrics decorated with UiO-66-NH₂ nanoparticles exhibit an ultrafast photothermal catalytic decontamination of dimethyl 4-nitrophenyl phosphate (DMNP), a typical simulant of CWAs. The half-life of the degradation reaction decreases from 3.4 to 1.6 min under simulated solar light irradiation, a significant gain over the values reported in the literature. Furthermore, DMNP can be degraded in 20 min by the graphene/UiO-66-NH₂ fabric, and even after 5 cycles the degradation efficiency still retains more than 92 %. More importantly, the photothermal conversion of graphene and its instantaneous heat transfer to the UiO-66-NH₂ catalyst effectively accelerate the catalytic reaction kinetics, achieving the fast detoxification of DMNP. The combination of catalytic degradation of MOFs with photothermal conversion effect of graphene makes the lightweight and flexible fabrics promising for protection against CWAs and other pollutants.

Spray-Coating of Catalytically Active MOF-Polythiourea through Postsynthetic Polymerization

A UiO-66-NCS MOF was formed by postsynthetic modification of UiO-66-NH₂ . The UiO-66-NCS MOFs displays a circa 20-fold increase in activity against the chemical warfare agent simulant dimethyl-4-nitrophenyl phosphate (DMNP) compared to UiO-66-NH₂ , making it the most active MOF materials using a validated high-throughput screening. The -NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine-terminated polypropylene polymers (Jeffamines) through a facile room-temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF-polythiourea (MOF-PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF-PTU hybrid material was spray-coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray-coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.

PPI-Dendrimer-Functionalized Magnetic Metal-Organic Framework (Fe3O4@MOF@PPI) with High Adsorption Capacity for Sustainable Wastewater Treatment

Herein, a magnetic zirconium-based metal-organic framework nanocomposite was synthesized by a simple solvothermal method and used as an adsorbent for the removal of direct and acid dyes from aqueous solution. To enhance its adsorption performance, poly(propyleneimine) dendrimer was used to functionalize the as-synthesized magnetic porous nanocomposite. The dendrimer-functionalized magnetic nanocomposite was characterized by field-emission scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms, and vibration sample magnetometer. The obtained results revealed the successful synthesis and functionalization of the magnetic nanocomposite. The adsorbents exhibited good magnetic properties with high saturation magnetization and high specific surface area. The adsorption isotherms and kinetics of anionic dyes were described by the Freundlich and pseudo-second-order models, respectively. It was found that the kinetics of adsorption of both the investigated dyes by the dendrimer-functionalized magnetic composite is considerably faster than the magnetic composite under the same condition. The adsorption capacity of the dendrimer-functionalized magnetic composite for investigated direct and acid dyes was 173.7 and 122.5 mg/g, respectively, which was higher than those of the existing magnetic adsorbents. This work provides new insights into the synthesis and application of hybrid magnetic adsorbents with synergistic properties of nanoporous metal-organic frameworks and dendrimer with a large number of functional groups for the removal of organic dyes.

Defectous UiO-66 MOF Nanocomposites as Reactive Media of Superior Protection against Toxic Vapors

The composites of UiO-66 with nanographite or oxidized graphitic carbon nitride nanospheres (∼10 wt %) were synthesized and used as CEES decontamination media from a vapor phase. The materials were characterized using XRD, nitrogen adsorption, SEM, potentiometric titration, FTIR, and thermal analysis. The results showed a marked improvement of the detoxification capability against the vapors of CEES compared to those of pristine UiO-66, either in terms of the amount adsorbed or surface reactivity. The maximum weight uptake for the composites reached 632 mg g^-1, which was higher than that on UiO-66. The improved adsorption and catalytic activity were linked to the new interface between the modifiers and MOF units/defects, which provided additional active sites formed as a result of modifiers' surface groups acting as MOF linkers. The morphology and porosity were also altered, positively affecting the sites' accessibility and their dispersion in the MOF particles. Dehydrohalogenation and oxidation were the predominant pathways of the composites' surface reactivity. The detoxification mechanisms involving CEES vapor-UiO-66 surface interactions differ from those reported for CEES liquid/dissolved liquid-UiO-66 interactions, and dehydrohalogenation, fragmentation, and oxidation predominate.

Metal-Organic Framework- and Polyoxometalate-Based Sorbents for the Uptake and Destruction of Chemical Warfare Agents

The threat of chemical warfare agents (CWAs), assured by their ease of synthesis and effectiveness as a terrorizing weapon, will persist long after the once-tremendous stockpiles in the U.S. and elsewhere are finally destroyed. As such, soldier and civilian protection, battlefield decontamination, and environmental remediation from CWAs remain top national security priorities. New chemical approaches for the fast and complete destruction of CWAs have been an active field of research for many decades, and new technologies have generated immense interest. In particular, our research team and others have shown metal-organic frameworks (MOFs) and polyoxometalates (POMs) to be active for sequestering CWAs and even catalyzing the rapid hydrolysis of agents. In this Forum Article, we highlight recent advancements made in the understanding and evaluation of POMs and Zr-based MOFs as CWA decontamination materials. Specifically, our aim is to bridge the gap between controlled, solution-phase laboratory studies and real-world or battlefield-like conditions by examining agent-material interactions at the gas-solid interface utilizing a multimodal experimental and computational approach. Herein, we report our progress in addressing the following research goals: (1) elucidating molecular-level mechanisms of the adsorption, diffusion, and reaction of CWA and CWA simulants within a series of Zr-based MOFs, such as UiO-66, MOF-808, and NU-1000, and POMs, including Cs₈Nb₆O₁₉ and (Et₂NH₂)₈[(α-PW₁₁O₃₉Zr(μ-OH)(H₂O))₂]·7H₂O, (2) probing the effects that common ambient gases, such as CO₂, SO₂, and NO₂, have on the efficacy of the MOF and POM materials for CWA destruction, and (3) using CWA simulant results to develop hypotheses for live agent chemistry. Key hypotheses are then tested with targeted live agent studies. Overall, our collaborative effort has provided insight into the fundamental aspects of agent-material interactions and revealed strategies for new catalyst development.

Zirconium-Based Metal-Organic Frameworks for the Catalytic Hydrolysis of Organophosphorus Nerve Agents

Organophoshorus nerve agents are among the most toxic chemicals known to humans, and because of their unfortunate recent use despite international bans, there is an urgent need to develop materials that can effectively degrade these nerve agents. Within the past decade, zirconium-based metal-organic frameworks (Zr-MOFs) have emerged as a bioinspired class of materials capable of rapidly hydrolyzing these compounds and significantly diminishing their toxicity. Both experimental and computational insights have guided the design of Zr-MOFs, leading to the development of catalysts capable of detoxifying nerve agents and simulants, chemicals with similar functionality but lower toxicity, via hydrolysis within seconds in basic aqueous solutions. While these systems are acceptable for the elimination of stockpile weapons, translating this catalytic performance to filters incorporating Zr-MOFs that can be used in masks or protective clothing is not trivial. As such, a large area of focus recently has been targeted toward integrating these hydrolysis catalysts into protective clothing and gear while retaining the performance from solution-based catalytic systems. This Forum Article provides an overview of the development of Zr-MOFs for the catalytic hydrolysis of organophosphorus substrates, including design principles and mechanistic insights for both solution-based and textile-coated systems. Finally, we highlight the remaining challenges yet to be addressed and offer perspectives on the future directions for this field.

Porous Zr-Based Metal-Organic Frameworks (Zr-MOFs)-Incorporated Thin-Film Nanocomposite Membrane toward Enhanced Desalination Performance

Four different thin-film nanocomposite (TFN) membranes were prepared by adding different concentrations of porous Zr-metal-organic frameworks (MOFs) (UiO-66 and UiO-66-NH₂) to piperazine aqueous solution (aqueous phase) or 1,3,5-benzenetricarbonyl trichloride-n-hexane solution (organic phase) by interfacial polymerization. The main purpose is to study the specific effects of different addition methods and addition amounts of nanoparticles on the structure and performance of the TFN membranes by interfacial polymerization. All four TFN membranes exhibited a higher water permeability while maintaining high salt rejection compared to thin-film composite membrane. On the one hand, the TFN membranes behave differently, which are prepared by adding the same kind of nanoparticles to the aqueous phase or organic phase, respectively. The TFN membrane prepared by adding 0.2 w/v% UiO-66 to the organic phase had a high water flux of 87.86 L m^-2 h^-1, compared to 46.31 L m^-2 h^-1 of the membrane prepared by adding 0.3 w/v% UiO-66 in the aqueous phase. This is due to the fact that UiO-66 greatly slows the interfacial polymerization rate when UiO-66 is added to the organic phase, resulting in a thinner and wider-aperture polyamide thin-film layer, reducing the water transmission resistance during filtration. Therefore, it is more economical by adding nanoparticles to organic phase than aqueous phase under the same filtering effect. On the other hand, different nanoparticles can also cause differences in performance and structure of the TFN membranes even in the same preparation manner. TFN membrane with UiO-66-NH₂ in the aqueous phase has higher water permeance than the one with UiO-66 in the aqueous phase, owing to the good hydrophilicity of the amino group, which improves the water dispersibility of UiO-66-NH₂ so that the TFN membrane is more uniform. In addition, UiO-66-NH₂ slows down the process of interface polymerization, making the membrane more porous. The monomers in the aqueous phase and organic phase can be adsorbed in the pores of Zr-MOFs, which makes the interfacial polymerization occur both in the pores and on the surface of the pores. Thus, the compatibility between the polyamide and MOFs was enhanced and less defects were formed in the thin-film layer, resulting in a high salt rejection even when the concentration of Zr-MOFs increased. This is the first time to explain that polyamide membrane has not obvious salt rejection attenuation with increasing porous material content using pore adsorption reaction monomer principle. Also, the Zr-MOFs-based TFN membrane exhibited good heat resistance and antifouling property. This work shows that porous Zr-MOFs nanomaterials have significant advantages in the development of nanofiltration membranes with high water flux and rejection.

Building MOF Nanocomposites with Oxidized Graphitic Carbon Nitride Nanospheres: The Effect of Framework Geometry on the Structural Heterogeneity

Composite of two MOFs, copper-based Cu-BTC (HKUST-1) and zirconium-based Zr-BDC (UiO-66), with oxidized graphitic carbon nitride nanospheres were synthesized. For comparison, pure MOFs were also obtained. The surface features were analyzed using x-ray diffraction (XRD), sorption of nitrogen, thermal analysis, and scanning electron microscopy (SEM). The incorporation of oxidized g-C₃N₄ to the Cu-BTC framework caused the formation of a heterogeneous material of a hierarchical pores structure, but a decreased surface area when compared to that of the parent MOF. In the case of UiO-66, functionalized nanospheres were acting as seeds around which the crystals grew. Even though the MOF phases were detected in both materials, the porosity analysis indicated that in the case of Cu-BTC, a collapsed MOF/nonporous and amorphous matter was also present and the MOF phase was more defectous than that in the case of UiO-66. The results suggested different roles of oxidized g-C₃N₄ during the composite synthesis, depending on the MOF geometry. While spherical units of UiO-66 grew undisturbed around oxidized and spherical g-C₃N₄, octahedral Cu-BTC units experienced geometrical constraints, leading to more defects, a disturbed growth of the MOF phase, and to the formation of mesopores at the contacts between the spheres and MOF units. The differences in the amounts of CO₂ adsorbed between the MOFs and the composites confirm the proposed role of oxidized g-C₃N₄ in the composite formation.

Layer-by-Layer Fabrication of Core-Shell Fe3O4@UiO-66-NH2 with High Catalytic Reactivity toward the Hydrolysis of Chemical Warfare Agent Simulants

Detoxifying materials against chemical warfare agents (CWAs) and their simulants are highly desired for proper handling of contamination by and destruction of CWAs. Herein, we report a facile layer-by-layer fabrication of core-shell Fe₃O₄@UiO-66-NH₂ and its application in fast degradation of CWA simulants. The Fe₃O₄@UiO-66-NH₂ composite was prepared through a layer-by-layer epitaxial growth strategy, by alternately immersing Fe₃O₄ nanoparticles in ethanol solutions of a metal node [Zr₆O₄(OH)₄]¹²⁺ precursor and organic linkers [NH₂-BDC, 2-aminoterephthalic acid], respectively, and separating using a magnet. As confirmed by characterization results, the Fe₃O₄@UiO-66-NH₂ composites with 24.4 μmol/g Zr₆ node content showed a well-defined core-shell structure as well as good thermal and chemical stability. These core-shell magnetic metal-organic frameworks (MOFs) were further tested in the catalytic hydrolysis of dimethyl-4-nitrophenyl phosphate (a nerve agent simulant) and demonstrated 36 times higher catalytic activity than the UiO-66-NH₂ powder due to their highly defective surface, high percentage of MOFs on the surface, and their rich mesoporous structure. Since magnetism was retained after the coating of MOFs, Fe₃O₄@UiO-66-NH₂ could be easily recovered and reused after catalysis.

Air, Water Vapor, and Aerosol Transport through Textiles with Surface Functional Coatings of Metal Oxides and Metal-Organic Frameworks

Currently, air permeable chemical/biological (CB) protective garments are based on activated carbon technology, which reduces moisture vapor transport needed for evaporative cooling and has potential to absorb and concentrate toxic materials. Researchers are exploring classes of sorbent materials that can selectively accumulate and decompose target compounds for potential to enhance protective suits and allow for novel filtration devices. Here, the metal-organic frameworks (MOFs) UiO-66-NH₂ and HKUST-1 have been identified as such materials. To better understand how MOFs can perform in future CB protective systems, atomic layer deposition (ALD) and solution deposition were used to modify nonwoven polypropylene and flame-resistant fabrics with HKUST-1 and UiO-66-NH₂. Air permeation, water vapor transport, filtration efficiency, and chemical reactivity against chemical agent simulants were assessed in relation to ALD thickness and MOF crystal size. MOF deposition on substrates decreased both air and chemical permeation while increasing filtration efficiency and chemical sorption. Moisture vapor transport was not affected by MOF growth on substrates, which is promising when considering thermal properties of protective garments. Future work should continue to explore how MOF deposition onto fiber and textile substrates impacts transport properties and chemical absorbance.

Controlling Size, Defectiveness, and Fluorescence in Nanoparticle UiO-66 Through Water and Ligand Modulation

UiO-66, a zirconium(IV) metal-organic framework (MOF) comprised of six-metal clusters and terephthalic acid ligands, displays excellent thermal and chemical stability and has functions in gas storage, catalysis, selective adsorption, and drug delivery. Though the stability of UiO-66 is highly advantageous, simultaneous synthetic control over particle size and defectiveness of UiO-66 remains difficult to attain. Using an acid-free solvothermal synthesis, we demonstrate that particle size, defectiveness, and inherent fluorescence of UiO-66 can be precisely tuned using the molar ligand to metal ratio, quantified water content, and reaction time during synthesis. These three synthetic handles allow for reproducible modulation of UiO-66 defectiveness between 0 and 12% and particle size between 20 to 120 nm, while maintaining high crystallinity in the nanoparticles that were formed. We also find that particle defectiveness is linked to common over-estimation of particle size measurements obtained via dynamic light scattering (DLS) and propose a model to correct elevated hydrodynamic diameter measurements. Finally, we report inherent fluorescence of non-functionalized UiO-66, which exhibits peak fluorescence at a wavelength of 390 nm following excitation at 280 nm and is maximized in large, defect-free particles. Overall, this synthetic approach and characterization of defect, size, and fluorescence represent new opportunities to tune the physiochemical properties of UiO-66.

Solid-Phase Detoxification of Chemical Warfare Agents using Zirconium-Based Metal Organic Frameworks and the Moisture Effects: Analyze via Digestion

Zirconium-based metal organic frameworks (Zr-MOFs) are highly chemically and thermally stable and have been of particular interest as reactive sorbents for chemical warfare agent (CWA) removal due to their fast and selective reactivity toward CWAs reported in buffer solutions. However, we find that decontamination of neat CWAs directly on Zr-MOFs, UiO-66, UiO-66-NH₂, and NU-1000 is rather slow, and the reactivity trend and products generated are very different from those in solution. Furthermore, we show that their decontamination rates are affected by the amount of moisture present in the MOFs. Although the effects are minor for UiO-66-NH₂ and NU-1000, the hydrolytic activity of UiO-66 toward CWAs dramatically improves as the amount of water present increases. Specifically, the initial hydrolysis rate of methyl paraoxon by UiO-66 increases from 6 μmol/d with 0 wt % water loading to 140 μmol/d with 400 wt % water loading. The results reported here suggest that decontamination of CWAs by Zr-MOFs in solid phase behaves very differently than solution decontamination. Additionally, we present for the first time a digestion method for analyzing and quantifying solid-phase decontamination, which is a daunting challenge itself due to the lack of a convenient analytical method.

Halogen bonding in UiO-66 frameworks promotes superior chemical warfare agent simulant degradation

Herein, a series of halogenated UiO-66 derivatives was synthesized and analyzed for the breakdown of the chemical warfare agent simulant dimethyl-4-nitrophenyl phosphate (DMNP) to analyze ligand effects. UiO-66-I degrades DMNP at a rate four times faster than the most active previously reported MOFs. MOF defects were quantified and ruled out as a cause for increased activity. Theoretical calculations suggest the enhanced activity of UiO-66-I originates from halogen bonding of the iodine atom to the phosphoester linkage allowing for more rapid hydrolysis of the P-O bond.

Water-Stable Chemical-Protective Textiles via Euhedral Surface-Oriented 2D Cu-TCPP Metal-Organic Frameworks

Abatement of chemical hazards using adsorptive metal-organic frameworks (MOFs) attracts substantial attention, but material stability and crystal integration into functional systems remain key challenges. Herein, water-stable, polymer fiber surface-oriented M-TCPP [M = Cu, Zn, and Co; H₂ TCPP = 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin] 2D MOF crystals are fabricated using a facile hydroxy double salt (HDS) solid-source conversion strategy. For the first time, Cu-TCPP is formed from a solid source and confirmed to be highly adsorptive for NH₃ and 2-chloroethyl ethyl sulfide (CEES), a blistering agent simulant, in humid (80% relative humidity (RH)) conditions. Moreover, the solid HDS source is found as a unique new approach to control MOF thin-film crystal orientation, thereby facilitating radially arranged MOF crystals on fibers. On a per unit mass of MOF basis in humid conditions, the MOF/fiber composite enhances NH₃ adsorptive capacity by a factor of 3 compared to conventionally prepared MOF powders. The synthesis route extends to other MOF/fiber composite systems, therefore providing a new route for chemically protective materials.

Single-component frameworks for heterogeneous catalytic hydrolysis of organophosphorous compounds in pure water

Amine modified Zr6-based metal-organic frameworks (MOFs) were synthesized through solvent-assisted linker incorporation (SALI) and utilized as single-component heterogeneous catalysts for the hydrolysis of organophosphorous compounds under solely aqueous conditions at room temperature. These materials display unprecidentedly fast catalytic hydrolysis for dimethyl p-nitrophenyl phosphate (DMNP) and nerve agent VX without the use of a buffered solution.

Multiple functional groups in UiO-66 improve chemical warfare agent simulant degradation

A library of 26 mixed ligand UiO-66 analogs were synthesized, characterized, and screened for catalytic degradation of the chemical warfare agent (CWA) simulant dimethyl 4-nitrophenylphosphate (DMNP).

Introduction to chemical warfare agents, relevant simulants and modern neutralisation methods

This short review presents the current main chemical warfare agents and their most relevant simulants, and the recent catalytic and selective methods for their soft neutralization, potentially usable in the future as an alternative to “heavy” methods for decontamination.

Combining Linker Design and Linker-Exchange Strategies for the Synthesis of a Stable Large-Pore Zr-Based Metal-Organic Framework

A Zr(IV)-based metal-organic framework (MOF), termed reo-MOF-1 [Zr₆O₈(H₂O)₈(SNDC)₄], composed of 4-sulfonaphthalene-2,6-dicarboxylate (HSNDC^2-) linkers and Zr₆O₈(H₂O)₈(CO₂)₈ clusters was synthesized by solvothermal synthesis. Structural analysis revealed that reo-MOF-1 adopts the reo topology highlighted with large cuboctahedral cages (23 Å). This structure is similar to that found in DUT-52 (fcu topology), however, reo-MOF-1 lacks the body-centered packing of the 12-connected Zr₆O₄(OH)₄(CO₂)₁₂ clusters, which is attributed to the subtle, but crucial influence in the bulkiness of functional groups on the linkers. The control experiments, where the ratio of H₃SNDC/naphthalene-2,6-dicarboxylate linkers was varied, also support our finding that the bulky functionalities play a key role for defect-controlled synthesis. The reo-MOF-1_A framework was obtained by linker exchange to yield a chemically and thermally stable material despite its large pores. Remarkably, reo-MOF-1_A exhibits permanent porosity (Brunauer-Emmett-Teller and Langmuir surface areas of 2104 and 2203 m² g^-1, respectively). Owing to these remarkable structural features, reo-MOF-1_A significantly enhances the yield in Brønsted acid-catalyzed reactions.

Fast and Sustained Degradation of Chemical Warfare Agent Simulants Using Flexible Self-Supported Metal-Organic Framework Filters

Self-detoxification filters against lethal chemical warfare agents (CWAs) are highly desirable for the protection of human beings and the environment. In this report, flexible self-supported filters of a series of Zr(IV)-based metal-organic frameworks (MOFs) including UiO-66, UiO-67, and UiO-66-NH₂ were successfully prepared and exhibited fast and sustained degradation of CWA simulants. A half-life as short as 2.4 min was obtained for the catalytic hydrolysis of dimethyl 4-nitrophenyl phosphate, and the percent conversion remained above 90% over a long-term exposure of 120 min, well exceeding those of the previously reported composite MOF filters and the corresponding MOF powders. The outstanding detoxification performance of the self-supported fibrous filter comes from the exceptionally high surface area, excellent pore accessibility, and hierarchical structure from the nano- to macroscale. This work demonstrates, for the first time, MOF-only filters as efficient self-detoxification media, which will offer new opportunities for the design and fabrication of functional materials for toxic chemical protection.

Stable Metal-Organic Frameworks with Group 4 Metals: Current Status and Trends

Group 4 metal-based metal-organic frameworks (M^IV-MOFs), including Ti-, Zr-, and Hf-based MOFs, are one of the most attractive classes of MOF materials owing to their superior chemical stability and structural tunability. Despite being a relatively new field, M^IV-MOFs have attracted significant research attention in the past few years, leading to exciting advances in syntheses and applications. In this outlook, we start with a brief overview of the history and current status of M^IV-MOFs, emphasizing the challenges encountered in their syntheses. The unique properties of M^IV-MOFs are discussed, including their high chemical stability and strong tolerance toward defects. Particular emphasis is placed on defect engineering in Zr-MOFs which offers additional routes to tailor their functions. Photocatalysis of M^IV-MOF is introduced as a representative example of their emerging applications. Finally, we conclude with the perspective of new opportunities in synthesis and defect engineering.