1
|
Zhu Y, Xu Y, Ling Z, Zhao C, Xu A, He F. The biofilm removal effect and osteogenic potential on the titanium surface by electrolytic cleaning: An in vitro comparison of electrolytic parameters and five techniques. Clin Oral Implants Res 2024; 35:454-466. [PMID: 38345170 DOI: 10.1111/clr.14245] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2023] [Revised: 01/23/2024] [Accepted: 01/30/2024] [Indexed: 04/09/2024]
Abstract
OBJECTIVES To determine the optimal current and time of electrolytic cleaning (EC), compare its biofilm removal effect with generic treatments and evaluate the influence of EC to surface characteristics and osteogenic potential of SLA titanium (Ti) discs. MATERIALS AND METHODS The six-species biofilm-covered Ti discs were placed as cathodes in physiologic saline and subjected to various current and time treatments. The residual biofilms were evaluated to determine the optimal parameters. The contaminated Ti discs were randomized and treated by rotating Ti brush; ultrasonic-scaling with metal tips; ultrasonic-scaling with PEEK tips; air-polishing and EC. The residual biofilms were compared using a lipopolysaccharide kit (LPS), scanning electron microscope (SEM), confocal laser scanning microscopy and colony-forming unit counting. Non-contaminated Ti discs were treated and characterized. The bone marrow mesenchymal stem cells (BMSCs) were cultured on treated non-contaminated Ti discs. The adhesion, proliferation, alkaline phosphatase (ALP) activity and osteocalcin level of BMSCs were assessed. RESULTS The parameters at 0.6A5min were considered optimal. For LPS and SEM, EC promoted a significantly greater biofilm removal than the other groups. There were no changes in the Ti discs' colour, topography, roughness and chemical elements after EC, and the electrolysis-treated Ti discs obtained a super-hydrophilic surface. EC positively impacted the proliferation and ALP activity of BMSCs, surpassing the efficacy of alternative treatments. CONCLUSIONS EC achieves a near-complete eradication of contaminants on the SLA surface, causes no surface damage with improved hydrophilicity, and promotes the early osteogenic response of BMSCs, which makes it a promising treatment for peri-implantitis.
Collapse
Affiliation(s)
- Yun Zhu
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Hangzhou, Zhejiang, China
- Zhejiang Provincial Clinical Research Center for Oral Disease, Hangzhou, Zhejiang, China
- Key Laboratory of Oral Biomedical Research of Zhejiang Province, Hangzhou, Zhejiang, China
| | - Yangbo Xu
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Hangzhou, Zhejiang, China
- Zhejiang Provincial Clinical Research Center for Oral Disease, Hangzhou, Zhejiang, China
- Key Laboratory of Oral Biomedical Research of Zhejiang Province, Hangzhou, Zhejiang, China
| | - Zhaoting Ling
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Hangzhou, Zhejiang, China
- Zhejiang Provincial Clinical Research Center for Oral Disease, Hangzhou, Zhejiang, China
- Key Laboratory of Oral Biomedical Research of Zhejiang Province, Hangzhou, Zhejiang, China
| | - Congrui Zhao
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Hangzhou, Zhejiang, China
- Zhejiang Provincial Clinical Research Center for Oral Disease, Hangzhou, Zhejiang, China
- Key Laboratory of Oral Biomedical Research of Zhejiang Province, Hangzhou, Zhejiang, China
| | - Antian Xu
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Hangzhou, Zhejiang, China
- Zhejiang Provincial Clinical Research Center for Oral Disease, Hangzhou, Zhejiang, China
- Key Laboratory of Oral Biomedical Research of Zhejiang Province, Hangzhou, Zhejiang, China
| | - Fuming He
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Hangzhou, Zhejiang, China
- Zhejiang Provincial Clinical Research Center for Oral Disease, Hangzhou, Zhejiang, China
- Key Laboratory of Oral Biomedical Research of Zhejiang Province, Hangzhou, Zhejiang, China
| |
Collapse
|
2
|
Gupta TT, Zumpano B, Opalinski J, Ritchey R, Winter N, Nodzo SR, Canty M. Cathodic voltage-controlled electrical stimulation and betadine decontaminate nosocomial pathogens from implant surfaces. mSphere 2024; 9:e0058323. [PMID: 38299852 PMCID: PMC10900904 DOI: 10.1128/msphere.00583-23] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/10/2023] [Accepted: 12/21/2023] [Indexed: 02/02/2024] Open
Abstract
Periprosthetic joint infection (PJI) after total joint arthroplasty is a major concern requiring multiple surgeries and antibiotic interventions. Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli are the predominant causes of these infections. Due to biofilm formation, antibiotic treatment for patients with PJI can prolong resistance, further complicating the use of current treatments. Previous research has shown that cathodic voltage-controlled electrical stimulation (CVCES) is an effective technique to prevent/treat implant-associated biofilm infections on titanium (Ti) surfaces. This study thus evaluated the efficacy of CVCES via the use of 10% betadine alone and in combination with CVCES to eradicate lab-grown biofilms on cemented and cementless cobalt-chromium (CoCr) and Ti surfaces. CVCES treatment alone for 24 hours demonstrated no detectable CFU for E. coli and P. aeruginosa biofilms on cementless CoCr implants. In the presence of cement, E. coli biofilms had 106 CFUs/implant remaining after CVCES treatment alone; however, P. aeruginosa biofilms on cemented implants were reduced to below detectable limits. The use of 10% betadine treatment for 3 minutes followed by 24-hour CVCES treatment brought CFU levels to below detectable limits in E. coli and P. aeruginosa. The same was true for S. aureus biofilms on cementless patellofemoral implants as well as femoral and tibial implants. These treatment methods were not sufficient for eradication of S. aureus biofilms on cemented implants. These results suggest that CVCES alone and CVCES with 10% betadine are effective approaches to treating biofilms formed by certain bacterial species potentially leading to the treatment of PJI.IMPORTANCEPeriprosthetic joint infections (PJIs) are problematic due to requiring multiple surgeries and antibiotic therapies that are responsible for increased patient morbidity and healthcare costs. These infections become resistant to antibiotic treatment due to the formation of biofilms on the orthopedic surfaces. Cathodic voltage-controlled electrical stimulation (CVCES) has previously been shown to be an effective technique to prevent and treat biofilm infections on different surfaces. This study shows that CVCES can increase the efficacy of 10% betadine irrigation used in debridement, antibiotics, and implant retention by 99.9% and clear infection to below detection limits. PJI treatments are at times limited, and CVCES could be a promising technology to improve patient outcomes.
Collapse
Affiliation(s)
| | | | | | - Riley Ritchey
- Garwood Medical Devices, LLC, Buffalo, New York, USA
| | - Nathan Winter
- Department of Orthopedics & Sports Medicine, University at Buffalo, Buffalo, New York, USA
| | - Scott R Nodzo
- Department of Orthopedics & Sports Medicine, University at Buffalo, Buffalo, New York, USA
| | - Mary Canty
- Garwood Medical Devices, LLC, Buffalo, New York, USA
| |
Collapse
|
3
|
Halali MA, de Lannoy CF. Quantifying the Impact of Electrically Conductive Membrane-Generated Hydrogen Peroxide and Extreme pH on the Viability of Escherichia coli Biofilms. Ind Eng Chem Res 2021. [DOI: 10.1021/acs.iecr.1c02914] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Affiliation(s)
- Mohamad Amin Halali
- Department of Chemical Engineering, McMaster University, Hamilton, Ontario L8S 4L8, Canada
| | | |
Collapse
|
4
|
Mohamed A, Ha PT, Beyenal H. Kinetics and scale up of oxygen reducing cathodic biofilms. Biofilm 2021; 3:100053. [PMID: 34308331 PMCID: PMC8283157 DOI: 10.1016/j.bioflm.2021.100053] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2021] [Revised: 05/05/2021] [Accepted: 06/01/2021] [Indexed: 11/30/2022] Open
Abstract
The goals of this work were to study the kinetics and investigate the factors controlling the scale up of oxygen reducing mixed culture cathodic biofilms. Cathodic biofilms were enriched on different electrode sizes (14.5 cm2, 40.3 cm2, 131 cm2 and 466 cm2). Biofilm enrichment shifted the oxygen reduction onset potential from -0.1 VAg/AgCl to 0.3 VAg/AgCl, indicating the biofilm catalyzed oxygen reduction. The kinetics of oxygen reduction were studied by varying the bulk dissolved oxygen concentration. Oxygen reduction followed a Michaelis-Menten kinetics on all electrode sizes. The maximum current density decreased with increasing electrode surface area (-97.0 ± 10.6 μA/cm2, -76.0 ± 8.2 μA/cm2, -66.3 ± 3.0 μA/cm2 and -43.5 ± 10.5 μA/cm2, respectively). Cyclic voltammograms suggest that scale up was limited by ohmic resistance, likely due to the low ionic conductivity in the wastewater medium. Mathematical modeling using combined Michaelis-Menten and Butler-Volmer model supports that the decrease in current density with increasing electrode surface area is caused by ohmic losses. Analysis of the microbial community structure in different size electrodes and in multiple regions on the same electrode showed low variability, suggesting that the microbial community does not control the scale up of cathodic biofilms.
Collapse
Affiliation(s)
- Abdelrhman Mohamed
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University, Pullman, WA, USA
| | - Phuc T. Ha
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University, Pullman, WA, USA
| | - Haluk Beyenal
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University, Pullman, WA, USA
| |
Collapse
|
5
|
Cherednichenko K, Kopitsyn D, Batasheva S, Fakhrullin R. Probing Antimicrobial Halloysite/Biopolymer Composites with Electron Microscopy: Advantages and Limitations. Polymers (Basel) 2021; 13:3510. [PMID: 34685269 PMCID: PMC8538282 DOI: 10.3390/polym13203510] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2021] [Revised: 09/29/2021] [Accepted: 10/08/2021] [Indexed: 01/07/2023] Open
Abstract
Halloysite is a tubular clay nanomaterial of the kaolin group with a characteristic feature of oppositely charged outer and inner surfaces, allowing its selective spatial modification. The natural origin and specific properties of halloysite make it a potent material for inclusion in biopolymer composites with polysaccharides, nucleic acids and proteins. The applications of halloysite/biopolymer composites range from drug delivery and tissue engineering to food packaging and the creation of stable enzyme-based catalysts. Another important application field for the halloysite complexes with biopolymers is surface coatings resistant to formation of microbial biofilms (elaborated communities of various microorganisms attached to biotic or abiotic surfaces and embedded in an extracellular polymeric matrix). Within biofilms, the microorganisms are protected from the action of antibiotics, engendering the problem of hard-to-treat recurrent infectious diseases. The clay/biopolymer composites can be characterized by a number of methods, including dynamic light scattering, thermo gravimetric analysis, Fourier-transform infrared spectroscopy as well as a range of microscopic techniques. However, most of the above methods provide general information about a bulk sample. In contrast, the combination of electron microscopy with energy-dispersive X-ray spectroscopy allows assessment of the appearance and composition of biopolymeric coatings on individual nanotubes or the distribution of the nanotubes in biopolymeric matrices. In this review, recent contributions of electron microscopy to the studies of halloysite/biopolymer composites are reviewed along with the challenges and perspectives in the field.
Collapse
Affiliation(s)
- Kirill Cherednichenko
- Department of Physical and Colloid Chemistry, Faculty of Chemical and Environmental Engineering, National University of Oil and Gas «Gubkin University», 65 Leninsky Prospekt, 119991 Moscow, Russia; (K.C.); (D.K.)
| | - Dmitry Kopitsyn
- Department of Physical and Colloid Chemistry, Faculty of Chemical and Environmental Engineering, National University of Oil and Gas «Gubkin University», 65 Leninsky Prospekt, 119991 Moscow, Russia; (K.C.); (D.K.)
| | - Svetlana Batasheva
- Institute of Fundamental Medicine and Biology, Kazan Federal University, Kreml uramı, 18, 420008 Kazan, Republic of Tatarstan, Russia;
| | - Rawil Fakhrullin
- Department of Physical and Colloid Chemistry, Faculty of Chemical and Environmental Engineering, National University of Oil and Gas «Gubkin University», 65 Leninsky Prospekt, 119991 Moscow, Russia; (K.C.); (D.K.)
- Institute of Fundamental Medicine and Biology, Kazan Federal University, Kreml uramı, 18, 420008 Kazan, Republic of Tatarstan, Russia;
| |
Collapse
|
6
|
Niño-Padilla EI, Velazquez C, Garibay-Escobar A. Mycobacterial biofilms as players in human infections: a review. BIOFOULING 2021; 37:410-432. [PMID: 34024206 DOI: 10.1080/08927014.2021.1925886] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2020] [Revised: 04/18/2021] [Accepted: 04/28/2021] [Indexed: 06/12/2023]
Abstract
The role of biofilms in pathogenicity and treatment strategies is often neglected in mycobacterial infections. In recent years, the emergence of nontuberculous mycobacterial infections has necessitated the development of novel prophylactic strategies and elucidation of the mechanisms underlying the establishment of chronic infections. More importantly, the question arises whether members of the Mycobacterium tuberculosis complex can form biofilms and contribute to latent tuberculosis and drug resistance because of the long-lasting and recalcitrant nature of its infections. This review discusses some of the molecular mechanisms by which biofilms could play a role in infection or pathological events in humans.
Collapse
Affiliation(s)
| | - Carlos Velazquez
- Departamento de Ciencias Químico Biológicas, Universidad de Sonora, Hermosillo, Sonora, México
| | - Adriana Garibay-Escobar
- Departamento de Ciencias Químico Biológicas, Universidad de Sonora, Hermosillo, Sonora, México
| |
Collapse
|
7
|
Yang X, Chen S. Microorganisms in sediment microbial fuel cells: Ecological niche, microbial response, and environmental function. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 756:144145. [PMID: 33303196 DOI: 10.1016/j.scitotenv.2020.144145] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/10/2020] [Revised: 11/05/2020] [Accepted: 11/24/2020] [Indexed: 06/12/2023]
Abstract
A sediment microbial fuel cell (SMFC) is a device that harvests electrical energy from sediments rich in organic matter. SMFCs have been attracting increasing amounts of interest in environmental remediation, since they are capable of providing a clean and inexhaustible source of electron donors or acceptors and can be easily controlled by adjusting the electrochemical parameters. The microorganisms inhabiting sediments and the overlying water play a pivotal role in SMFCs. Since the SMFC is applied in an open environment rather than in an enclosed chamber, the effects of the environment on the microbes should be intense and the microbial community succession should be extremely complex. Thus, this review aims to provide an overview of the microorganisms in SMFCs, which few previous review papers have reported. In this study, the anodic and cathodic niches for the microorganisms in SMFCs are summarized, how the microbial population and community interact with the SMFC environment is discussed, a new microbial succession strategy called the electrode stimulation succession is proposed, and recent developments in the environmental functions of SMFCs are discussed from the perspective of microorganisms. Future studies are needed to investigate the electrode stimulation succession, the environmental function and the electron transfer mechanism in order to boost the application of SMFCs for power generation and environmental remediation.
Collapse
Affiliation(s)
- Xunan Yang
- Guangdong Provincial Key Laboratory of Microbial Culture Collection and Application, State Key Laboratory of Applied Microbiology Southern China, Guangdong Institute of Microbiology, Guangdong Academy of Sciences, Guangzhou, 510070, China.
| | - Shanshan Chen
- Guangdong Provincial Key Laboratory of Water Quality Improvement and Ecological Restoration for Watersheds, Institute of Environmental and Ecological Engineering, Guangdong University of Technology, Guangzhou 510006, China.
| |
Collapse
|
8
|
Bian B, Xu J, Katuri KP, Saikaly PE. Resistance assessment of microbial electrosynthesis for biochemical production to changes in delivery methods and CO 2 flow rates. BIORESOURCE TECHNOLOGY 2021; 319:124177. [PMID: 33035863 DOI: 10.1016/j.biortech.2020.124177] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/05/2020] [Revised: 09/19/2020] [Accepted: 09/22/2020] [Indexed: 06/11/2023]
Abstract
Microbial electrosynthesis (MES) for CO2 valorization could be influenced by fluctuations in CO2 mass transfer and flow rates. In this study, we developed an efficient method for CO2 delivery to cathodic biofilm by directly sparging CO2 through the pores of ceramic hollow fiber wrapped with Ni-foam/carbon nanotube electrode, and obtained 45% and 77% higher acetate and methane production, respectively. This was followed by the MES stability test in response to fluctuations in CO2 flow rates varying from 0.3 ml/min to 10 ml/min. The biochemical production exhibited an increasing trend with CO2 flow rates, achieving higher acetate (47.0 ± 18.4 mmol/m2/day) and methane (240.0 ± 32.2 mmol/m2/day) generation at 10 ml/min with over 90% coulombic efficiency. The biofilm and suspended biomass, however, showed high resistance to CO2 flow fluctuations with Methanobacterium and Acetobacterium accounting for 80% of the total microbial community, which suggests the robustness of MES for onsite carbon conversion.
Collapse
Affiliation(s)
- Bin Bian
- Biological and Environmental Science and Engineering (BESE) Division, Water Desalination and Reuse Center (WDRC), King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia
| | - Jiajie Xu
- Biological and Environmental Science and Engineering (BESE) Division, Water Desalination and Reuse Center (WDRC), King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia
| | - Krishna P Katuri
- Biological and Environmental Science and Engineering (BESE) Division, Water Desalination and Reuse Center (WDRC), King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia
| | - Pascal E Saikaly
- Biological and Environmental Science and Engineering (BESE) Division, Water Desalination and Reuse Center (WDRC), King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia.
| |
Collapse
|
9
|
Caniglia G, Kranz C. Scanning electrochemical microscopy and its potential for studying biofilms and antimicrobial coatings. Anal Bioanal Chem 2020; 412:6133-6148. [PMID: 32691088 PMCID: PMC7442582 DOI: 10.1007/s00216-020-02782-7] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/17/2020] [Revised: 06/08/2020] [Accepted: 06/19/2020] [Indexed: 02/06/2023]
Abstract
Biofilms are known to be well-organized microbial communities embedded in an extracellular polymeric matrix, which supplies bacterial protection against external stressors. Biofilms are widespread and diverse, and despite the considerable large number of publications and efforts reported regarding composition, structure and cell-to-cell communication within biofilms in the last decades, the mechanisms of biofilm formation, the interaction and communication between bacteria are still not fully understood. This knowledge is required to understand why biofilms form and how we can combat them or how we can take advantage of these sessile communities, e.g. in biofuel cells. Therefore, in situ and real-time monitoring of nutrients, metabolites and quorum sensing molecules is of high importance, which may help to fill that knowledge gap. This review focuses on the potential of scanning electrochemical microscopy (SECM) as a versatile method for in situ studies providing temporal and lateral resolution in order to elucidate cell-to-cell communication, microbial metabolism and antimicrobial impact, e.g. of antimicrobial coatings through the study of electrochemical active molecules. Given the complexity and diversity of biofilms, challenges and limitations will be also discussed.
Collapse
Affiliation(s)
- Giada Caniglia
- Institute of Analytical and Bioanalytical Chemistry, Ulm University, Albert-Einstein-Allee, 11, 89081, Ulm, Germany
| | - Christine Kranz
- Institute of Analytical and Bioanalytical Chemistry, Ulm University, Albert-Einstein-Allee, 11, 89081, Ulm, Germany.
| |
Collapse
|
10
|
Kaiser F, Scharnweber D, Bierbaum S, Wolf-Brandstetter C. Success and side effects of different treatment options in the low current attack of bacterial biofilms on titanium implants. Bioelectrochemistry 2020; 133:107485. [DOI: 10.1016/j.bioelechem.2020.107485] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/18/2019] [Revised: 02/13/2020] [Accepted: 02/13/2020] [Indexed: 12/15/2022]
|
11
|
Gajda I, Obata O, Jose Salar-Garcia M, Greenman J, Ieropoulos IA. Long-term bio-power of ceramic microbial fuel cells in individual and stacked configurations. Bioelectrochemistry 2020; 133:107459. [PMID: 32126486 PMCID: PMC7132540 DOI: 10.1016/j.bioelechem.2020.107459] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2019] [Revised: 01/08/2020] [Accepted: 01/08/2020] [Indexed: 11/30/2022]
Abstract
In order to improve the potential of Microbial Fuel Cells (MFCs) as an applicable technology, the main challenge is to engineer practical systems for bioenergy production at larger scales and to test how the prototypes withstand the challenges occurring during the prolonged operation under constant feeding regime with real waste stream. This work presents the performance assessment of low-cost ceramic MFCs in the individual, stacked (modular) and modular cascade (3 modules) configurations during long term operation up to 19 months, utilising neat human urine as feedstock. During 1 year, the performance of the individual MFC units reached up to 1.56 mW (22.3 W/m3), exhibiting only 20% power loss on day 350 which was significantly smaller in comparison to conventional proton or cation exchange membranes. The stack module comprising 22 MFCs reached up to 21.4 mW (11.9 W/m3) showing power recovery to the initial output levels after 580 days, whereas the 3-module cascade reached up to 75 mW (13.9 W/m3) of power, showing 20% power loss on day 446. In terms of chemical oxygen demand (COD) removal, the 3-module cascade configuration achieved a cumulative reduction of >92%, which is higher than that observed in the single module (56%).
Collapse
Affiliation(s)
- Iwona Gajda
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, University of the West of England, BS16 1QY, UK.
| | - Oluwatosin Obata
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, University of the West of England, BS16 1QY, UK
| | - Maria Jose Salar-Garcia
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, University of the West of England, BS16 1QY, UK
| | - John Greenman
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, University of the West of England, BS16 1QY, UK; Centre For Research in Biosciences, University of the West of England, BS16 1QY, UK
| | - Ioannis A Ieropoulos
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, University of the West of England, BS16 1QY, UK; Centre For Research in Biosciences, University of the West of England, BS16 1QY, UK.
| |
Collapse
|
12
|
Ehrensberger MT, Clark CM, Canty MK, McDermott EP. Electrochemical methods to enhance osseointegrated prostheses. Biomed Eng Lett 2020; 10:17-41. [PMID: 32175128 PMCID: PMC7046908 DOI: 10.1007/s13534-019-00134-8] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2019] [Revised: 10/11/2019] [Accepted: 10/20/2019] [Indexed: 12/19/2022] Open
Abstract
Osseointegrated (OI) prosthetic limbs have been shown to provide an advantageous treatment option for amputees. In order for the OI prosthesis to be successful, the titanium implant must rapidly achieve and maintain proper integration with the bone tissue and remain free of infection. Electrochemical methods can be utilized to control and/or monitor the interfacial microenvironment where the titanium implant interacts with the biological system (host bone tissue or bacteria). This review will summarize the current understanding of how electrochemical modalities can influence bone tissue and bacteria with specific emphasis on applications where the metallic prosthesis itself can be utilized directly as a stimulating electrode for enhanced osseointegration and infection control. In addition, a summary of electrochemical impedance sensing techniques that could be used to potentially assess osseointegration and infection status of the metallic prosthesis is presented.
Collapse
Affiliation(s)
- Mark T. Ehrensberger
- Department of Biomedical Engineering, University at Buffalo, 445 Biomedical Research Building, 3435 Main Street, Buffalo, NY 14214 USA
- Department of Orthopaedics, University at Buffalo, Buffalo, NY USA
| | - Caelen M. Clark
- Department of Biomedical Engineering, University at Buffalo, 445 Biomedical Research Building, 3435 Main Street, Buffalo, NY 14214 USA
| | - Mary K. Canty
- Department of Biomedical Engineering, University at Buffalo, 445 Biomedical Research Building, 3435 Main Street, Buffalo, NY 14214 USA
- Department of Microbiology and Immunology, University at Buffalo, Buffalo, NY USA
| | - Eric P. McDermott
- Department of Biomedical Engineering, University at Buffalo, 445 Biomedical Research Building, 3435 Main Street, Buffalo, NY 14214 USA
| |
Collapse
|
13
|
Raval YS, Mohamed A, Zmuda HM, Patel R, Beyenal H. Hydrogen-Peroxide-Generating Electrochemical Scaffold Eradicates Methicillin-Resistant Staphylococcus aureus Biofilms. GLOBAL CHALLENGES (HOBOKEN, NJ) 2019; 3:1800101. [PMID: 31218078 PMCID: PMC6551415 DOI: 10.1002/gch2.201800101] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/05/2018] [Revised: 02/11/2019] [Indexed: 06/09/2023]
Abstract
Increasing rates of chronic wound infections caused by antibiotic-resistant bacteria are a crisis in healthcare settings. Biofilms formed by bacterial communities in these wounds create a complex environment, enabling bacteria to persist, even with antibiotic treatment. Wound infections caused by methicillin-resistant Staphylococcus aureus (MRSA) are major causes of morbidity in clinical practice. There is a need for new therapeutic interventions not based on antibiotics. Hydrogen peroxide (H2O2) is a known antibacterial/antibiofilm agent, continuous delivery of which has been challenging. A conductive electrochemical scaffold (e-scaffold) is developed, which is composed of carbon fabric that electrochemically reduces dissolved oxygen into H2O2 when polarized at -0.6 VAg/AgCl, as a novel antibiofilm wound dressing material. In this study, the in vitro antibiofilm activity of the e-scaffold against MRSA is investigated. The developed e-scaffold efficiently eradicates MRSA biofilms, based on bacterial quantitation and ATP measurements. Moreover, imaging hinted at the possibility of cell-membrane damage as a mechanism of action. These results suggest that an H2O2-generating e-scaffold may be a novel platform for eliminating MRSA biofilms without using antibiotics and may be useful to treat chronic MRSA wound infections.
Collapse
Affiliation(s)
- Yash S. Raval
- Division of Clinical MicrobiologyMayo ClinicRochesterMN55905USA
| | - Abdelrhman Mohamed
- The Gene and Voiland School of Chemical Engineering and BioengineeringWashington State UniversityPullmanWA99164USA
| | - Hannah M. Zmuda
- Division of Clinical MicrobiologyMayo ClinicRochesterMN55905USA
- The Gene and Voiland School of Chemical Engineering and BioengineeringWashington State UniversityPullmanWA99164USA
| | - Robin Patel
- Division of Clinical MicrobiologyMayo ClinicRochesterMN55905USA
- Division of Infectious DiseasesMayo ClinicRochesterMN55905USA
| | - Haluk Beyenal
- The Gene and Voiland School of Chemical Engineering and BioengineeringWashington State UniversityPullmanWA99164USA
| |
Collapse
|
14
|
Antibiotics Enhance Prevention and Eradication Efficacy of Cathodic-Voltage-Controlled Electrical Stimulation against Titanium-Associated Methicillin-Resistant Staphylococcus aureus and Pseudomonas aeruginosa Biofilms. mSphere 2019; 4:4/3/e00178-19. [PMID: 31043516 PMCID: PMC6495338 DOI: 10.1128/msphere.00178-19] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022] Open
Abstract
Periprosthetic joint infections (PJIs) develop clinically in the presence of antibiotic therapies and are responsible for increased patient morbidity and rising health care costs. Many of these infections involve bacterial biofilm formation on orthopedic hardware, and it has been well established that these biofilms are refractory to most antibiotic treatments. Recent studies have focused on novel methods to prevent and eradicate infection. Cathodic-voltage-controlled electrical stimulation (CVCES) has previously been shown to be effective as a method for prevention and eradication of Gram-positive and Gram-negative infections. The present study revealed that the utility of CVCES for prevention and eradication of methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa is enhanced in the presence of clinically relevant antibiotics. The synergistic effects of CVCES and antibiotics are effective in a magnitude-dependent manner. The results of this study indicate a promising alternative method to current PJI mitigation techniques. Periprosthetic joint infection (PJI) develops clinically, even with antibiotic treatment, and methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa are predominant causes of these infections. Due to biofilm formation, antibiotic treatment for patients with PJI can perpetuate resistance, further complicating the use of noninvasive treatments. This study evaluated cathodic-voltage-controlled electrical stimulation (CVCES) of titanium, in combination with a clinically relevant antibiotic, to synergistically prevent MRSA and P. aeruginosa PJIs by inhibiting bacterial adherence or as a treatment for eradicating established biofilms. CVCES of −1.0 V, −1.5 V, or −1.8 V (versus Ag/AgCl), with or without vancomycin for MRSA or gentamicin for P. aeruginosa, was applied to sterile titanium incubated with cultures to evaluate prevention of attachment or eradication of preestablished biofilms. Treatments were 24 h long and included open-circuit potential controls, antibiotic alone, CVCES, and CVCES plus antibiotic. Biofilm-associated and planktonic CFU were enumerated. In general, CVCES at −1.8 V alone or with antibiotic completely eradicated biofilm-associated CFU for both strains, and these parameters were also highly effective against planktonic bacteria, resulting in a >6-log reduction in MRSA and no detectable planktonic P. aeruginosa. All CFU were reduced ∼3 to 5 logs from controls for prevention CVCES plus antibiotics at −1.0 V and −1.5 V against MRSA. Remarkably, there were no detectable P. aeruginosa CFU following prevention CVCES at −1.0 V or −1.5 V with gentamicin. Our results suggest that CVCES in combination with antibiotics may be an effective approach for prevention and treatment of PJI. IMPORTANCE Periprosthetic joint infections (PJIs) develop clinically in the presence of antibiotic therapies and are responsible for increased patient morbidity and rising health care costs. Many of these infections involve bacterial biofilm formation on orthopedic hardware, and it has been well established that these biofilms are refractory to most antibiotic treatments. Recent studies have focused on novel methods to prevent and eradicate infection. Cathodic-voltage-controlled electrical stimulation (CVCES) has previously been shown to be effective as a method for prevention and eradication of Gram-positive and Gram-negative infections. The present study revealed that the utility of CVCES for prevention and eradication of methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa is enhanced in the presence of clinically relevant antibiotics. The synergistic effects of CVCES and antibiotics are effective in a magnitude-dependent manner. The results of this study indicate a promising alternative method to current PJI mitigation techniques.
Collapse
|
15
|
Santoro C, Arbizzani C, Erable B, Ieropoulos I. Microbial fuel cells: From fundamentals to applications. A review. JOURNAL OF POWER SOURCES 2017; 356:225-244. [PMID: 28717261 PMCID: PMC5465942 DOI: 10.1016/j.jpowsour.2017.03.109] [Citation(s) in RCA: 527] [Impact Index Per Article: 75.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/13/2017] [Accepted: 03/23/2017] [Indexed: 05/03/2023]
Abstract
In the past 10-15 years, the microbial fuel cell (MFC) technology has captured the attention of the scientific community for the possibility of transforming organic waste directly into electricity through microbially catalyzed anodic, and microbial/enzymatic/abiotic cathodic electrochemical reactions. In this review, several aspects of the technology are considered. Firstly, a brief history of abiotic to biological fuel cells and subsequently, microbial fuel cells is presented. Secondly, the development of the concept of microbial fuel cell into a wider range of derivative technologies, called bioelectrochemical systems, is described introducing briefly microbial electrolysis cells, microbial desalination cells and microbial electrosynthesis cells. The focus is then shifted to electroactive biofilms and electron transfer mechanisms involved with solid electrodes. Carbonaceous and metallic anode materials are then introduced, followed by an explanation of the electro catalysis of the oxygen reduction reaction and its behavior in neutral media, from recent studies. Cathode catalysts based on carbonaceous, platinum-group metal and platinum-group-metal-free materials are presented, along with membrane materials with a view to future directions. Finally, microbial fuel cell practical implementation, through the utilization of energy output for practical applications, is described.
Collapse
Affiliation(s)
- Carlo Santoro
- Department of Chemical and Biological Engineering, Center Micro-Engineered Materials (CMEM), University of New Mexico, 87106, Albuquerque, NM, USA
| | - Catia Arbizzani
- Department of Chemistry “Giacomo Ciamician”, University of Bologna, Via Selmi 2, 40126, Bologna, Italy
| | - Benjamin Erable
- University of Toulouse, CNRS, Laboratoire de Génie Chimique, CAMPUS INP – ENSIACET, 4 Allée Emile Monso, CS 84234, 31432, Toulouse Cedex 4, France
| | - Ioannis Ieropoulos
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, T Block, University of the West of England, Frenchay Campus, Coldharbour Ln, Bristol, BS16 1QY, United Kingdom
| |
Collapse
|
16
|
Grattieri M, Shivel ND, Sifat I, Bestetti M, Minteer SD. Sustainable Hypersaline Microbial Fuel Cells: Inexpensive Recyclable Polymer Supports for Carbon Nanotube Conductive Paint Anodes. CHEMSUSCHEM 2017; 10:2053-2058. [PMID: 28244231 DOI: 10.1002/cssc.201700099] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/19/2017] [Revised: 02/26/2017] [Indexed: 06/06/2023]
Abstract
Microbial fuel cells are an emerging technology for wastewater treatment, but to be commercially viable and sustainable, the electrode materials must be inexpensive, recyclable, and reliable. In this study, recyclable polymeric supports were explored for the development of anode electrodes to be applied in single-chamber microbial fuel cells operated in field under hypersaline conditions. The support was covered with a carbon nanotube (CNT) based conductive paint, and biofilms were able to colonize the electrodes. The single-chamber microbial fuel cells with Pt-free cathodes delivered a reproducible power output after 15 days of operation to achieve 12±1 mW m-2 at a current density of 69±7 mA m-2 . The decrease of the performance in long-term experiments was mostly related to inorganic precipitates on the cathode electrode and did not affect the performance of the anode, as shown by experiments in which the cathode was replaced and the fuel cell performance was regenerated. The results of these studies show the feasibility of polymeric supports coated with CNT-based paint for microbial fuel cell applications.
Collapse
Affiliation(s)
- Matteo Grattieri
- Departments of Chemistry and Material Science and Engineering, University of Utah, 315 S 1400 E Rm 2020, Salt Lake City, UT, 84112, USA
| | - Nelson D Shivel
- Departments of Chemistry and Material Science and Engineering, University of Utah, 315 S 1400 E Rm 2020, Salt Lake City, UT, 84112, USA
| | - Iram Sifat
- Departments of Chemistry and Material Science and Engineering, University of Utah, 315 S 1400 E Rm 2020, Salt Lake City, UT, 84112, USA
- United States-Pakistan Centre for Advanced Studies in Water, Mehran University of Engineering and Technology, Jamshoro, 76090, Sindh, Pakistan
| | - Massimiliano Bestetti
- Department of Chemistry, Materials and Chemical Engineering "G. Natta", Politecnico di Milano, Piazza L. da Vinci 32, 20133, Milano, Italy
| | - Shelley D Minteer
- Departments of Chemistry and Material Science and Engineering, University of Utah, 315 S 1400 E Rm 2020, Salt Lake City, UT, 84112, USA
| |
Collapse
|
17
|
Canty M, Luke-Marshall N, Campagnari A, Ehrensberger M. Cathodic voltage-controlled electrical stimulation of titanium for prevention of methicillin-resistant Staphylococcus aureus and Acinetobacter baumannii biofilm infections. Acta Biomater 2017; 48:451-460. [PMID: 27890730 DOI: 10.1016/j.actbio.2016.11.056] [Citation(s) in RCA: 26] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/14/2016] [Revised: 11/18/2016] [Accepted: 11/23/2016] [Indexed: 12/19/2022]
Abstract
Antibiotic resistance of bacterial biofilms limits available treatment methods for implant-associated orthopaedic infections. This study evaluated the effects of applying cathodic voltage-controlled electrical stimulations (CVCES) of -1.5V and -1.8V (vs. Ag/AgCl) to coupons of commercially pure titanium (cpTi) incubated in cultures of methicillin-resistant Staphylococcus aureus (MRSA) and Acinetobacter baumannii (A. baumannii) as a method of preventing bacterial attachment. Stimulations were applied for 2, 4, and 8h and coupon-associated and planktonic colony-forming units (CFU) were enumerated following stimulation. Compared to open circuit potential (OCP) controls, CVCES for 4h at -1.8V significantly reduced coupon-associated MRSA CFU by 99.9% (1.30×104vs. 4.45×107, p=0.047) and A. baumannii coupon-associated CFU by 99.9% (1.64×104vs. 5.93×107, p=0.001) and reduced planktonic CFU below detectable levels for both strains. CVCES at -1.8V for 8h also reduced coupon-associated and planktonic CFU below detectable levels for each strain. CVCES at -1.5V for 4 and 8h, and -1.8V for 2h did not result in clinically relevant reductions. For 4 and 8h stimulations, the current density was significantly higher for -1.8V than -1.5V, an effect directly related to the rate of water and oxygen reduction on the cpTi surface. This significantly increased the pH, a suspected influence in decreased CFU viability. The voltage-dependent electrochemical properties of cpTi likely contribute to the observed antimicrobial effects of CVCES. This study revealed that CVCES of titanium could prevent coupon-associated and planktonic CFU of Gram-positive MRSA and Gram-negative A. baumannii from reaching detectable levels in a magnitude-dependent and time-dependent manner. STATEMENT OF SIGNIFICANCE Periprosthetic joint infection is a devastating outcome of total joint arthroplasty and has led to increased patient morbidity and rising healthcare costs. Current treatments are limited by the growing prevalence of antimicrobial resistant biofilms. Therefore, there is a growing interest in the prevention of bacterial colonization of implants. Previous work has shown that cathodic voltage-controlled electrical stimulation (CVCES) of titanium is effective both in vitro and in vivo as an antimicrobial strategy to eradicate established implant-associated biofilm infections. The present study revealed that CVCES of titanium coupons also has utility in preventing coupon-associated and planktonic colony-forming units of Gram-positive methicillin-resistant Staphylococcus aureus and Gram-negative Acinetobacter baumannii from reaching detectable levels in a magnitude-dependent and time-dependent manner.
Collapse
|
18
|
Smith SL, Boothman C, Williams HA, Ellis BL, Wragg J, West JM, Lloyd JR. Microbial impacts on 99mTc migration through sandstone under highly alkaline conditions relevant to radioactive waste disposal. THE SCIENCE OF THE TOTAL ENVIRONMENT 2017; 575:485-495. [PMID: 27751688 DOI: 10.1016/j.scitotenv.2016.08.126] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/28/2016] [Revised: 08/09/2016] [Accepted: 08/18/2016] [Indexed: 06/06/2023]
Abstract
Geological disposal of intermediate level radioactive waste in the UK is planned to involve the use of cementitious materials, facilitating the formation of an alkali-disturbed zone within the host rock. The biogeochemical processes that will occur in this environment, and the extent to which they will impact on radionuclide migration, are currently poorly understood. This study investigates the impact of biogeochemical processes on the mobility of the radionuclide technetium, in column experiments designed to be representative of aspects of the alkali-disturbed zone. Results indicate that microbial processes were capable of inhibiting 99mTc migration through columns, and X-ray radiography demonstrated that extensive physical changes had occurred to the material within columns where microbiological activity had been stimulated. The utilisation of organic acids under highly alkaline conditions, generating H2 and CO2, may represent a mechanism by which microbial processes may alter the hydraulic conductivity of a geological environment. Column sediments were dominated by obligately alkaliphilic H2-oxidising bacteria, suggesting that the enrichment of these bacteria may have occurred as a result of H2 generation during organic acid metabolism. The results from these experiments show that microorganisms are able to carry out a number of processes under highly alkaline conditions that could potentially impact on the properties of the host rock surrounding a geological disposal facility for intermediate level radioactive waste.
Collapse
Affiliation(s)
- Sarah L Smith
- Research Centre for Radwaste and Decommissioning & Williamson Research Centre for Molecular Environmental Science, School of Earth, Atmospheric and Environmental Sciences, University of Manchester, Williamson Building, Oxford Road, Manchester M13 9PL, United Kingdom; British Geological Survey, Environmental Science Centre, Nicker Hill, Keyworth, Nottingham NG12 5GG, United Kingdom
| | - Christopher Boothman
- Research Centre for Radwaste and Decommissioning & Williamson Research Centre for Molecular Environmental Science, School of Earth, Atmospheric and Environmental Sciences, University of Manchester, Williamson Building, Oxford Road, Manchester M13 9PL, United Kingdom
| | - Heather A Williams
- Department of Nuclear Medicine, Manchester Royal Infirmary, Oxford Road, M13 9WL, United Kingdom
| | - Beverly L Ellis
- Department of Nuclear Medicine, Manchester Royal Infirmary, Oxford Road, M13 9WL, United Kingdom
| | - Joanna Wragg
- British Geological Survey, Environmental Science Centre, Nicker Hill, Keyworth, Nottingham NG12 5GG, United Kingdom
| | - Julia M West
- British Geological Survey, Environmental Science Centre, Nicker Hill, Keyworth, Nottingham NG12 5GG, United Kingdom
| | - Jonathan R Lloyd
- Research Centre for Radwaste and Decommissioning & Williamson Research Centre for Molecular Environmental Science, School of Earth, Atmospheric and Environmental Sciences, University of Manchester, Williamson Building, Oxford Road, Manchester M13 9PL, United Kingdom
| |
Collapse
|
19
|
Popat SC, Torres CI. Critical transport rates that limit the performance of microbial electrochemistry technologies. BIORESOURCE TECHNOLOGY 2016; 215:265-273. [PMID: 27211921 DOI: 10.1016/j.biortech.2016.04.136] [Citation(s) in RCA: 46] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/31/2016] [Revised: 04/26/2016] [Accepted: 04/29/2016] [Indexed: 05/21/2023]
Abstract
Microbial electrochemistry technologies (METs) take advantage of the connection of microorganisms with electrodes. In the classic case of a microbial anode, the maximization of current density produced is often the goal. But, current production is dependent on many transport processes occurring, which can be rate-limiting. These include the fluxes of electron donor and acceptor, the ionic flux, the acidity and alkalinity fluxes at anode and cathode respectively, the electron transport flux at the biofilm, and the reactant/product crossover flux. Associated with these fluxes are inherent concentration gradients that can affect performance. This critical review provides an analysis on how these transport processes have hindered the development of METs, and how MET designs have evolved as more knowledge of these transport limitations is gained. Finally, suggestions are provided on how to design MET systems taking into consideration critical transport processes that are intimately linked to the current produced.
Collapse
Affiliation(s)
- Sudeep C Popat
- Swette Center for Environmental Biotechnology, Biodesign Institute, Arizona State University, Tempe, AZ, USA
| | - César I Torres
- Swette Center for Environmental Biotechnology, Biodesign Institute, Arizona State University, Tempe, AZ, USA; School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, AZ, USA.
| |
Collapse
|
20
|
Lotowska WA, Rutkowska IA, Seta E, Szaniawska E, Wadas A, Sek S, Raczkowska A, Brzostek K, Kulesza PJ. Bacterial-biofilm enhanced design for improved electrocatalytic reduction of oxygen in neutral medium. Electrochim Acta 2016. [DOI: 10.1016/j.electacta.2016.07.117] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
21
|
Catalysis of oxygen reduction reaction by an iron-reducing bacterium isolated from marine corrosion product layers. J Electroanal Chem (Lausanne) 2016. [DOI: 10.1016/j.jelechem.2016.04.053] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
22
|
Electricity and disinfectant production from wastewater: Microbial Fuel Cell as a self-powered electrolyser. Sci Rep 2016; 6:25571. [PMID: 27172836 PMCID: PMC4865956 DOI: 10.1038/srep25571] [Citation(s) in RCA: 60] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2015] [Accepted: 04/15/2016] [Indexed: 11/21/2022] Open
Abstract
This study presents a simple and sustainable Microbial Fuel Cell as a standalone, self-powered reactor for in situ wastewater electrolysis, recovering nitrogen from wastewater. A process is proposed whereby the MFC electrical performance drives the electrolysis of wastewater towards the self-generation of catholyte within the same reactor. The MFCs were designed to harvest the generated catholyte in the internal chamber, which showed that liquid production rates are largely proportional to electrical current generation. The catholyte demonstrated bactericidal properties, compared to the control (open-circuit) diffusate, and reduced observable biofilm formation on the cathode electrode. Killing effects were confirmed using bacterial kill curves constructed by exposing a bioluminescent Escherichia coli target, as a surrogate coliform, to catholyte where a rapid kill rate was observed. Therefore, MFCs could serve as a water recovery system, a disinfectant/cleaner generator that limits undesired biofilm formation and as a washing agent in waterless urinals to improve sanitation. This simple and ready to implement MFC system can convert organic waste directly into electricity and self-driven nitrogen along with water recovery. This could lead to the development of energy positive bioprocesses for sustainable wastewater treatment.
Collapse
|
23
|
Santoro C, Babanova S, Erable B, Schuler A, Atanassov P. Bilirubin oxidase based enzymatic air-breathing cathode: Operation under pristine and contaminated conditions. Bioelectrochemistry 2016; 108:1-7. [DOI: 10.1016/j.bioelechem.2015.10.005] [Citation(s) in RCA: 46] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/03/2015] [Revised: 10/16/2015] [Accepted: 10/23/2015] [Indexed: 11/25/2022]
|
24
|
Gajda I, Greenman J, Melhuish C, Santoro C, Li B, Cristiani P, Ieropoulos I. Electro-osmotic-based catholyte production by Microbial Fuel Cells for carbon capture. WATER RESEARCH 2015; 86:108-15. [PMID: 26343045 DOI: 10.1016/j.watres.2015.08.014] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/14/2015] [Revised: 07/09/2015] [Accepted: 08/06/2015] [Indexed: 05/21/2023]
Abstract
In Microbial Fuel Cells (MFCs), the recovery of water can be achieved with the help of both active (electro-osmosis), and passive (osmosis) transport pathways of electrolyte through the semi-permeable selective separator. The electrical current-dependent transport, results in cations and electro-osmotically dragged water molecules reaching the cathode. The present study reports on the production of catholyte on the surface of the cathode, which was achieved as a direct result of electricity generation using MFCs fed with wastewater, and employing Pt-free carbon based cathode electrodes. The highest pH levels (>13) of produced liquid were achieved by the MFCs with the activated carbon cathodes producing the highest power (309 μW). Caustic catholyte formation is presented in the context of beneficial cathode flooding and transport mechanisms, in an attempt to understand the effects of active and passive diffusion. Active transport was dominant under closed circuit conditions and showed a linear correlation with power performance, whereas osmotic (passive) transport was governing the passive flux of liquid in open circuit conditions. Caustic catholyte was mineralised to a mixture of carbonate and bicarbonate salts (trona) thus demonstrating an active carbon capture mechanism as a result of the MFC energy-generating performance. Carbon capture would be valuable for establishing a carbon negative economy and environmental sustainability of the wastewater treatment process.
Collapse
Affiliation(s)
- Iwona Gajda
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, Block T, UWE, Coldharbour Lane, Bristol BS16 1QY, UK.
| | - John Greenman
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, Block T, UWE, Coldharbour Lane, Bristol BS16 1QY, UK; Biological, Biomedical and Analytical Sciences, UWE, Coldharbour Lane, Bristol BS16 1QY, UK
| | - Chris Melhuish
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, Block T, UWE, Coldharbour Lane, Bristol BS16 1QY, UK
| | - Carlo Santoro
- Department of Civil and Environmental Engineering, University of Connecticut, 261 Glenbrook rd, Storrs, CT 06269, USA; Center for Clean Energy Engineering, University of Connecticut, 44 Weaver rd, Storrs, CT 06269, USA; Center for Micro-Engineered Materials (CMEM), Department of Chemical and Biological Engineering, University of New Mexico, Albuquerque, NM, USA
| | - Baikun Li
- Department of Civil and Environmental Engineering, University of Connecticut, 261 Glenbrook rd, Storrs, CT 06269, USA; Center for Clean Energy Engineering, University of Connecticut, 44 Weaver rd, Storrs, CT 06269, USA
| | - Pierangela Cristiani
- RSE - Ricerca sul Sistema Energetico S.p.A., Environment and Sustainable Development Dept., Via Rubattino 54, 20134 Milan, Italy
| | - Ioannis Ieropoulos
- Bristol BioEnergy Centre, Bristol Robotics Laboratory, Block T, UWE, Coldharbour Lane, Bristol BS16 1QY, UK; Biological, Biomedical and Analytical Sciences, UWE, Coldharbour Lane, Bristol BS16 1QY, UK.
| |
Collapse
|
25
|
Sultana ST, Atci E, Babauta JT, Mohamed Falghoush A, Snekvik KR, Call DR, Beyenal H. Electrochemical scaffold generates localized, low concentration of hydrogen peroxide that inhibits bacterial pathogens and biofilms. Sci Rep 2015; 5:14908. [PMID: 26464174 PMCID: PMC4604468 DOI: 10.1038/srep14908] [Citation(s) in RCA: 63] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2015] [Accepted: 09/11/2015] [Indexed: 11/29/2022] Open
Abstract
We hypothesized that low concentrations of H2O2 could be generated through the electrochemical conversion of oxygen by applying an electric potential to a conductive scaffold and produce a low, but constant, concentration of H2O2 that would be sufficient to destroy biofilms. To test our hypothesis we used a multidrug-resistant Acinetobacter baumannii strain, because this species is often implicated in difficult-to-treat biofilm infections. We used conductive carbon fabric as the scaffold material ("e-scaffold"). In vitro experiments demonstrated the production of a maximum constant concentration of ~25 μM H2O2 near the e-scaffold surface. An e-scaffold was overlaid onto an existing A. baumannii biofilm, and within 24 h there was a ~4-log reduction in viable bacteria with an ~80% decrease in biofilm surface coverage. A similar procedure was used to overlay an e-scaffold onto an existing A. baumannii biofilm that was grown on a porcine explant. After 24 h, there was a ~3-log reduction in viable bacteria from the infected porcine explants with no observable damage to the underlying mammalian tissue based on a viability assay and histology. This research establishes a novel foundation for an alternative antibiotic-free wound dressing to eliminate biofilms.
Collapse
Affiliation(s)
- Sujala T. Sultana
- School of Chemical Engineering & Bioengineering, Washington State University, Pullman 99163, WA
| | - Erhan Atci
- School of Chemical Engineering & Bioengineering, Washington State University, Pullman 99163, WA
| | - Jerome T. Babauta
- School of Chemical Engineering & Bioengineering, Washington State University, Pullman 99163, WA
| | - Azeza Mohamed Falghoush
- Department of Veterinary Microbiology and Pathology, Washington State University, Pullman 99163, WA
| | - Kevin R. Snekvik
- Department of Veterinary Microbiology and Pathology, Washington State University, Pullman 99163, WA
- Washington Animal Disease Diagnostic Laboratory, Washington State University, Pullman 99163, WA
| | - Douglas R. Call
- Department of Veterinary Microbiology and Pathology, Washington State University, Pullman 99163, WA
- Paul G. Allen School for Global Animal Health, Washington State University, Pullman 99163, WA
| | - Haluk Beyenal
- School of Chemical Engineering & Bioengineering, Washington State University, Pullman 99163, WA
| |
Collapse
|
26
|
Ha PT, Renslow RS, Atci E, Reardon PN, Lindemann SR, Fredrickson JK, Call DR, Beyenal H. Regulation of electron transfer processes affects phototrophic mat structure and activity. Front Microbiol 2015; 6:909. [PMID: 26388853 PMCID: PMC4558538 DOI: 10.3389/fmicb.2015.00909] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2015] [Accepted: 08/19/2015] [Indexed: 11/24/2022] Open
Abstract
Phototrophic microbial mats are among the most diverse ecosystems in nature. These systems undergo daily cycles in redox potential caused by variations in light energy input and metabolic interactions among the microbial species. In this work, solid electrodes with controlled potentials were placed under mats to study the electron transfer processes between the electrode and the microbial mat. The phototrophic microbial mat was harvested from Hot Lake, a hypersaline, epsomitic lake located near Oroville (Washington, USA). We operated two reactors: graphite electrodes were polarized at potentials of -700 mVAg/AgCl [cathodic (CAT) mat system] and +300 mVAg/AgCl [anodic (AN) mat system] and the electron transfer rates between the electrode and mat were monitored. We observed a diel cycle of electron transfer rates for both AN and CAT mat systems. Interestingly, the CAT mats generated the highest reducing current at the same time points that the AN mats showed the highest oxidizing current. To characterize the physicochemical factors influencing electron transfer processes, we measured depth profiles of dissolved oxygen (DO) and sulfide in the mats using microelectrodes. We further demonstrated that the mat-to-electrode and electrode-to-mat electron transfer rates were light- and temperature-dependent. Using nuclear magnetic resonance (NMR) imaging, we determined that the electrode potential regulated the diffusivity and porosity of the microbial mats. Both porosity and diffusivity were higher in the CAT mats than in the AN mats. We also used NMR spectroscopy for high-resolution quantitative metabolite analysis and found that the CAT mats had significantly higher concentrations of osmoprotectants such as betaine and trehalose. Subsequently, we performed amplicon sequencing across the V4 region of the 16S rRNA gene of incubated mats to understand the impact of electrode potential on microbial community structure. These data suggested that variation in the electrochemical conditions under which mats were generated significantly impacted the relative abundances of mat members and mat metabolism.
Collapse
Affiliation(s)
- Phuc T Ha
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University, Pullman, WA USA
| | - Ryan S Renslow
- Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, WA USA
| | - Erhan Atci
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University, Pullman, WA USA
| | - Patrick N Reardon
- Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, WA USA
| | - Stephen R Lindemann
- Biological Sciences Division, Pacific Northwest National Laboratory, Richland, WA USA
| | - James K Fredrickson
- Biological Sciences Division, Pacific Northwest National Laboratory, Richland, WA USA
| | - Douglas R Call
- Paul G. Allen School for Global Animal Health, Washington State University, Pullman, WA USA
| | - Haluk Beyenal
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University, Pullman, WA USA
| |
Collapse
|
27
|
Three-dimensional X-ray microcomputed tomography of carbonates and biofilm on operated cathode in single chamber microbial fuel cell. Biointerphases 2015; 10:031009. [DOI: 10.1116/1.4930239] [Citation(s) in RCA: 59] [Impact Index Per Article: 6.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
|
28
|
Grattieri M, Babanova S, Santoro C, Guerrini E, Trasatti SPM, Cristiani P, Bestetti M, Atanassov P. Enzymatic Oxygen Microsensor Based on Bilirubin Oxidase Applied to Microbial Fuel Cells Analysis. ELECTROANAL 2015. [DOI: 10.1002/elan.201400543] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Matteo Grattieri
- Department of Chemistry, Materials and Chemical‐Engineering, Politecnico di Milano, Piazza Leonardo Da Vinci, 32, 20133 Milan, Italy
- Department of Chemistry , Università degli Studi di Milano, Via Golgi 19, 20133 Milan, Italy
| | - Sofia Babanova
- Center for Emerging Energy Technologies, Department of Chemical & Nuclear Engineering, Center for Emerging Energy Technologies, University of New Mexico, Albuquerque, NM 87131, USA
| | - Carlo Santoro
- Center for Emerging Energy Technologies, Department of Chemical & Nuclear Engineering, Center for Emerging Energy Technologies, University of New Mexico, Albuquerque, NM 87131, USA
| | - Edoardo Guerrini
- Department of Chemistry , Università degli Studi di Milano, Via Golgi 19, 20133 Milan, Italy
| | - Stefano PM Trasatti
- Department of Chemistry , Università degli Studi di Milano, Via Golgi 19, 20133 Milan, Italy
| | - Pierangela Cristiani
- RSE – Ricerca sul Sistema Energetico S.p.A., Sustainable Development and Energy Sources Department, 20133 Milan, Italy
| | - Massimiliano Bestetti
- Department of Chemistry, Materials and Chemical‐Engineering, Politecnico di Milano, Piazza Leonardo Da Vinci, 32, 20133 Milan, Italy
| | - Plamen Atanassov
- Center for Emerging Energy Technologies, Department of Chemical & Nuclear Engineering, Center for Emerging Energy Technologies, University of New Mexico, Albuquerque, NM 87131, USA
| |
Collapse
|
29
|
Abstract
One of the methods of controlling biofilms that has widely been discussed in the literature is to apply a potential or electrical current to a metal surface on which the biofilm is growing. Although electrochemical biofilm control has been studied for decades, the literature is often conflicting, as is detailed in this review. The goals of this review are: (1) to present the current status of knowledge regarding electrochemical biofilm control; (2) to establish a basis for a fundamental definition of electrochemical biofilm control and requirements for studying it; (3) to discuss current proposed mechanisms; and (4) to introduce future directions in the field. It is expected that the review will provide researchers with guidelines on comparing datasets across the literature and generating comparable datasets. The authors believe that, with the correct design, electrochemical biofilm control has great potential for industrial use.
Collapse
Affiliation(s)
- Sujala T Sultana
- a The Gene and Linda Voiland School of Chemical Engineering and Bioengineering , Washington State University , Pullman , WA , USA
| | - Jerome T Babauta
- a The Gene and Linda Voiland School of Chemical Engineering and Bioengineering , Washington State University , Pullman , WA , USA
| | - Haluk Beyenal
- a The Gene and Linda Voiland School of Chemical Engineering and Bioengineering , Washington State University , Pullman , WA , USA
| |
Collapse
|
30
|
Babauta JT, Hsu L, Atci E, Kagan J, Chadwick B, Beyenal H. Multiple cathodic reaction mechanisms in seawater cathodic biofilms operating in sediment microbial fuel cells. CHEMSUSCHEM 2014; 7:2898-2906. [PMID: 25154833 DOI: 10.1002/cssc.201402377] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/03/2014] [Revised: 06/20/2014] [Indexed: 06/03/2023]
Abstract
In this study, multiple reaction mechanisms in cathodes of sediment microbial fuel cells (SMFCs) were characterized by using cyclic voltammetry and microelectrode measurements of dissolved oxygen and pH. The cathodes were acclimated in SMFCs with sediment and seawater from San Diego Bay. Two limiting current regions were observed with onset potentials of approximately +400 mVAg/AgCl for limiting current I and -120 mVAg/AgCl for limiting current II. The appearance of two catalytic waves suggests that multiple cathodic reaction mechanisms influence cathodic performance. Microscale oxygen concentration measurements showed a zero surface concentration at the electrode surface for limiting current II but not for limiting current I, which allowed us to distinguish limiting current II as the conventional oxygen reduction reaction and limiting current I as a currently unidentified cathodic reaction mechanism. Microscale pH measurements further confirmed these results.
Collapse
Affiliation(s)
- Jerome T Babauta
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University, Pullman, WA (USA)
| | | | | | | | | | | |
Collapse
|
31
|
Murphy SA, Solomon BM, Meng S, Copeland JM, Shaw TJ, Ferry JL. Geochemical production of reactive oxygen species from biogeochemically reduced Fe. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2014; 48:3815-3821. [PMID: 24597860 DOI: 10.1021/es4051764] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
The photochemical reduction of Fe(III) complexes to Fe(II) is a well-known initiation step for the production of reactive oxygen species (ROS) in sunlit waters. Here we show a geochemical mechanism for the same in dark environments based on the tidally driven, episodic movement of anoxic groundwaters through oxidized, Fe(III) rich sediments. Sediment samples were collected from the top 5 cm of sediment in a saline tidal creek in the estuary at Murrell's Inlet, South Carolina and characterized with respect to total Fe, acid volatile sulfides, and organic carbon content. These sediments were air-dried, resuspended in aerated solution, then exposed to aqueous sulfide at a range of concentrations chosen to replicate the conditions characteristic of a tidal cycle, beginning with low tide. No detectable ROS production occurred from this process in the dark until sulfide was added. Sulfide addition resulted in the rapid production of hydrogen peroxide, with maximum concentrations of 3.85 μM. The mechanism of hydrogen peroxide production was tested using a simplified three factor representation of the system based on hydrogen sulfide, Fe(II) and Fe(III). The resulting predictive model for maximum hydrogen peroxide agreed with measured hydrogen peroxide in field-derived samples at the 95% level of confidence, although with a persistent negative bias suggesting a minor undiscovered peroxide source in sediments.
Collapse
Affiliation(s)
- Sarah A Murphy
- Department of Chemistry and Biochemistry, University of South Carolina , Columbia, South Carolina 29208, United States
| | | | | | | | | | | |
Collapse
|
32
|
Babauta JT, Atci E, Ha PT, Lindemann SR, Ewing T, Call DR, Fredrickson JK, Beyenal H. Localized electron transfer rates and microelectrode-based enrichment of microbial communities within a phototrophic microbial mat. Front Microbiol 2014; 5:11. [PMID: 24478768 PMCID: PMC3902354 DOI: 10.3389/fmicb.2014.00011] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2013] [Accepted: 01/08/2014] [Indexed: 11/13/2022] Open
Abstract
Phototrophic microbial mats frequently exhibit sharp, light-dependent redox gradients that regulate microbial respiration on specific electron acceptors as a function of depth. In this work, a benthic phototrophic microbial mat from Hot Lake, a hypersaline, epsomitic lake located near Oroville in north-central Washington, was used to develop a microscale electrochemical method to study local electron transfer processes within the mat. To characterize the physicochemical variables influencing electron transfer, we initially quantified redox potential, pH, and dissolved oxygen gradients by depth in the mat under photic and aphotic conditions. We further demonstrated that power output of a mat fuel cell was light-dependent. To study local electron transfer processes, we deployed a microscale electrode (microelectrode) with tip size ~20 μm. To enrich a subset of microorganisms capable of interacting with the microelectrode, we anodically polarized the microelectrode at depth in the mat. Subsequently, to characterize the microelectrode-associated community and compare it to the neighboring mat community, we performed amplicon sequencing of the V1–V3 region of the 16S gene. Differences in Bray-Curtis beta diversity, illustrated by large changes in relative abundance at the phylum level, suggested successful enrichment of specific mat community members on the microelectrode surface. The microelectrode-associated community exhibited substantially reduced alpha diversity and elevated relative abundances of Prosthecochloris, Loktanella, Catellibacterium, other unclassified members of Rhodobacteraceae, Thiomicrospira, and Limnobacter, compared with the community at an equivalent depth in the mat. Our results suggest that local electron transfer to an anodically polarized microelectrode selected for a specific microbial population, with substantially more abundance and diversity of sulfur-oxidizing phylotypes compared with the neighboring mat community.
Collapse
Affiliation(s)
- Jerome T Babauta
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University Pullman, WA, USA
| | - Erhan Atci
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University Pullman, WA, USA
| | - Phuc T Ha
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University Pullman, WA, USA
| | - Stephen R Lindemann
- Biological Sciences Division, Pacific Northwest National Laboratory Richland, WA, USA
| | - Timothy Ewing
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University Pullman, WA, USA
| | - Douglas R Call
- Paul G. Allen School for Global Animal Health, Washington State University College of Veterinary Medicine Pullman, WA, USA
| | - James K Fredrickson
- Biological Sciences Division, Pacific Northwest National Laboratory Richland, WA, USA
| | - Haluk Beyenal
- The Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University Pullman, WA, USA
| |
Collapse
|