Calcification of valved aortic allografts in rats: effects of age, crosslinking, and inhibitors

Prevention by the CXCR2 antagonist SCH527123 of the calcification of porcine heart valve cusps implanted subcutaneously in rats

Introduction

Calcification is a main cause of bioprosthetic heart valves failure. It may be promoted by the inflammation developed in the glutaraldehyde (GA)-fixed cusps of the bioprosthesis. We tested the hypothesis that antagonizing the C-X-C chemokines receptor 2 (CXCR2) may prevent the calcification of GA-fixed porcine aortic valves.

Materiel and methods

Four-week-old Sprague Dawley males were transplanted with 2 aortic valve cusps isolated from independent pigs and implanted into the dorsal wall. Four groups of 6 rats were compared: rats transplanted with GA-free or GA-fixed cusps and rats transplanted with GA-fixed cusps and treated with 1 mg/kg/day SCH5217123 (a CXCR2 antagonist) intraperitoneally (IP) or subcutaneously (SC) around the xenograft, for 14 days. Then, rats underwent blood count before xenografts have been explanted for histology and biochemistry analyses.

Results

A strong calcification of the xenografts was induced by GA pre-incubation. However, we observed a significant decrease in this effect in rats treated with SCH527123 IP or SC. Implantation of GA-fixed cusps was associated with a significant increase in the white blood cell count, an effect that was significantly prevented by SCH527123. In addition, the expression of the CD3, CD68 and CXCR2 markers was reduced in the GA-fixed cusps explanted from rats treated with SCH527123 as compared to those explanted from non-treated rats.

Conclusion

The calcification of GA-fixed porcine aortic valve cusps implanted subcutaneously in rats was significantly prevented by antagonizing CXCR2 with SCH527123. This effect may partly result from an inhibition of the GA-induced infiltration of T-cells and macrophages into the xenograft.

Current Progress in Anticalcif ication for Bioprosthetic and Polymeric Heart Valves

The use of bioprosthetic valves fabricated from fixed heterograft tissue (porcine aortic valves or bovine pericardium) in heart valve replacement surgery is limited because of calcification-related failures. The mechanism of calcification of bioprosthetic valves is quite complex and has a variety of determinants, including host factors, tissue fixation conditions, and mechanical effects. Currently, there is no effective therapy to prevent calcification in clinical settings. This article reviews a variety of anticalcification strategies that are under investigation either in advanced animal models or in clinical trials. Bisphosphonates, such as ethan hydroxybisphosphonate (EHBP), inhibit calcium phosphate crystal formation. However, because of their systemic toxicity, they are used as either tissue treatments or polymeric site-specific delivery systems. Detergent treatment, such as sodium dodecyl sulfate (SDS), extracts almost all phospholipids from bioprosthetic heart valve cuspal tissue. Procedures, such as amino oleic acid pretreatment, inhibit calcium uptake. Polyurethane trileaflet valves, investigated as alternatives to bioprosthetic or mechanical valve prostheses, undergo intrinsic and thrombus-related calcification and degradation. Calcification- and thrombus-resistant polyurethanes synthesized in our laboratory by covalent linking of EHBP or heparin (either in bulk or on surface) by unique polyepoxidation chemistry are attractive candidates for further research. Tissue-engineered heart valves may have an important place in the future.

Detoxification of Glutaraldehyde Treated Porcine Pericardium Using L-arginine & NABH(4)

Background

Calcification is the most frequent cause of clinical failure of bioprosthetic tissues fabricated from GA-fixed porcine valves or bovine pericardium. A multi-factorial approach using different mechanisms was recently developed to reduce the calcification of bioprosthetic tissues. The purpose of the present study was to evaluate the synchronized synergism of using L-arginine and NaBH₄, compared with ethanol and L-lysine, in glutaraldehyde treated porcine pericardium from the standpoint of calcification and tissue elasticity.

Materials and Methods

Porcine pericardium was fixed at 0.625% GA (7 days at room temperature after 2 days at 4℃). An interim step of ethanol (80%; 1 day at room temperature) or L-lysine (0.1 M; 2 days at 37℃) or L-arginine (0.1 M; 2 days at 37℃) was followed by completion of the GA fixation. A final step of NaBH₄ (0.1 M; 2 days at room temperature) was followed. Their tensile strength, thickness, and thermal stability were measured. Treated pericardia were implanted subcutaneously into three-week-old Sprague-Dawley rats for 8 weeks. Calcium content was assessed by atomic absorption spectroscopy and histology.

Results

L-arginine and NaBH₄ pretreatment (1.81±0.39 kgf/5 mm p=0.001, 0.30±0.08 mm p<0.001) significantly increased tensile strength and thickness compared with the control (0.53±0.34 kgf/5 mm, 0.10±0.02 mm). In a thermal stability test, L-arginine and NaBH₄ pretreatment (84.25±1.12℃, p=0.023) caused a significant difference from the control (86.25±0.00℃). L-lysine and NaBH₄ pretreatment (183.8±42.6 ug/mg, p=0.804), and L-arginine and NaBH₄ pretreatment (163.3±27.5 ug/mg, p=0.621) did not significantly inhibit calcification compared to the control (175.5±45.3 ug/mg), but ethanol and NaBH₄ pretreatment did (38.5±37.3 ug/mg, p=0.003).

Conclusion

The combined pretreatment using L-arginine and NaBH₄ after GA fixation seemed to increase the tensile strength and thickness of porcine pericardium, fixed with GA. Additionally, it seemed to keep thermal stability. However it could not decrease the calcification of porcine pericardium fixed with GA. NaBH₄ pretreatment seemed to decrease the calcification of porcine pericardium fixed with GA, but only with ethanol.

Osteopontin

Osteopontin (OPN) is a multifunctional molecule highly expressed in chronic inflammatory and autoimmune diseases, and it is specifically localized in and around inflammatory cells. OPN is a secreted adhesive molecule, and it is thought to aid in the recruitment of monocytes-macrophages and to regulate cytokine production in macrophages, dendritic cells, and T-cells. OPN has been classified as T-helper 1 cytokine and thus believed to exacerbate inflammation in several chronic inflammatory diseases, including atherosclerosis. Besides proinflammatory functions, physiologically OPN is a potent inhibitor of mineralization, it prevents ectopic calcium deposits and is a potent inducible inhibitor of vascular calcification. Clinically, OPN plasma levels have been found associated with various inflammatory diseases, including cardiovascular burden. It is thus imperative to dissect the OPN proinflammatory and anticalcific functions. OPN recruitment functions of inflammatory cells are thought to be mediated through its adhesive domains, especially the arginine-glycine-aspartate (RGD) sequence that interacts with several integrin heterodimers. However, the integrin receptors and intracellular pathways mediating OPN effects on immune cells are not well established. Furthermore, several studies show that OPN is cleaved by at least 2 classes of proteases: thrombin and matrix-metalloproteases (MMPs). Most importantly, at least in vitro , fragments generated by cleavage not only maintain OPN adhesive functions but also expose new active domains that may impart new activities. The role for OPN proteolytic fragments in vivo is almost completely unexplored. We believe that further knowledge of the effects of OPN fragments on cell responses might help in designing therapeutics targeting inflammatory and cardiovascular diseases.

Photomediated crosslinking of C6-cinnamate derivatized type I collagen

Synthesis and characterization of cinnamated Type I collagen and its related mechanical properties after photomediated crosslinking were investigated in detail. Using an EDC/NHS conjugation method, collagen was chemically modified to incorporate a photosensitive cinnamate moiety. The cinnamated collagen was fully characterized by 1H NMR, UV-vis, and circular dichroism (CD) spectroscopy, as well as by rheological and mechanical analyses. Cinnamated collagens with varying degrees of derivatization retained collagen triple helical structure. The rheological spectra of collagen solutions demonstrate that the storage modulus decreases with increasing cinnamate content, owing to a decrease in physical crosslinking. The kinetics of the crosslinking process in both hydrated gels and dry films were monitored by UV-vis spectroscopy and confirmed that crosslinking was complete within 60 min of irradiation. The uniaxial stress-strain behavior of crosslinked collagen films, including Young's modulus and ultimate tensile strength, was comparable to values reported for glutaraldehyde-crosslinked monomeric collagen films. These data demonstrate that derivatization of collagen with photosensitive cinnamate moieties provides a facile route for solid-state crosslinking, thereby improving the mechanical properties of collagen and enhancing the potential applicability of collagen-based materials in tissue engineering and drug delivery.

Native fibrillar collagen membranes of micron-scale and submicron thicknesses for cell support and perfusion

Fibrillar type I collagen is nontoxic, biocompatible, and possesses considerable strength and stability. In a study of scaffolds for use in laminated tissue substitutes, we examined the properties of membranes made from air-dried hydrogels of collagen fibrils that were polymerized from native, monomeric collagen. Planar collagen membranes (CMs) of 0.1-5.3 microm dry thickness were made by variation of the collagen concentration and/or the volume of the hydrogel. The planar CMs, which were comprised of a dense feltwork of long collagen fibrils 70-100 nm in diameter, showed considerable resistance to rupture and retained their membranous character after 6 weeks in tissue culture medium at 37 degrees C. CMs that were relatively thick when dry exhibited a greater proportional increase in rehydrated thickness and a greater diffusivity (when rehydrated) to 4.3 kDa dextran than did CMs that were relatively thin when dry. Hollow, tubular CMs of several configurations were prepared by embedment of solid, removable forms into collagen hydrogels prior to drying. By use of special fixtures, a planar CM that incorporated multiple, parallel tubes was fabricated. In summary, hydrogels of fibrillar collagen can be transformed into membranous structures suitable for tissue engineering applications.

Prevention of Calcification of Bioprosthetic Heart Valve Cusp and Aortic Wall With Ethanol and Aluminum Chloride

BACKGROUND

Calcification is frequently associated with device failure of bioprostheses fabricated from either glutaraldehyde pretreated porcine aortic valves or bovine pericardium. It was hypothesized that differential pretreatment with ethanol-aluminum chloride will prove safe and efficacious for inhibiting the calcification of both the porcine aortic valve bioprosthetic cusp and the aortic wall.

METHODS

Glutaraldehyde-fixed porcine aortic valves were subjected to differential aluminum chloride (AlCl3) and ethanol pretreatment; aortic wall segments were treated exclusively with AlCl3 (0.1 moles/L) for 45 minutes, 6 hours, or 8 hours (groups 3A, B, and C, respectively), followed by valve cusp incubations in ethanol (80%, pH 7.4). Nontreated control bioprosthetic valves were either stent-mounted porcine aortic valve bioprostheses (Carpentier-Edwards, group 1) (Edwards, Santa Anna, CA) or St. Jude Toronto SPV valves (St. Jude Medical, St. Paul, MN) (group 2). Mitral valve replacements were carried out in juvenile sheep for 150 days.

RESULTS

Calcium in cusps from group 3A was 2.84 +/- 0.62 mg calcium/g tissue versus control, 22.79 +/- 8.46 mg calcium/g tissue, p = 0.04. Valves pretreated with AlCl3 for 45 minutes, 6 hours, and 8 hours had significantly lower levels of calcium in the aortic wall compared to controls (40.38 +/- 5.66, 26.77 +/- 4.02, and 28.94 +/- 8.25 mg calcium/g tissue for groups 3A, 3B, and 3C, respectively, vs 95.47 +/- 17.14 mg calcium/g tissue for group 1, p < 0.001, and 133.42 +/- 3.96 mg calcium/g tissue for group 2, p < 0.001).

CONCLUSIONS

Differentially applied ethanol and aluminum chloride pretreatment significantly inhibited calcification of both the glutaraldehyde-fixed porcine aortic valve bioprosthetic cusp and the aortic wall.

Hyperphosphatemia and vascular calcification in end-stage renal disease

Vascular calcification is a common finding in atherosclerosis and a serious problem in uremic patients. Because of the correlation of hyperphosphatemia and vascular calcification, the ability of extracellular inorganic phosphate levels to regulate human aortic smooth muscle cell (HSMC) culture mineralization in vitro was examined. HSMC cultured in media containing normal physiologic levels of inorganic phosphate (1.4 mM) did not mineralize. In contrast, HSMC cultured in media containing phosphate levels comparable with those seen in hyperphosphatemic individuals (>1.4 mM) showed dose-dependent increases in mineral deposition. Mechanistic studies showed that elevated phosphate treatment of HSMC also enhanced the expression of the osteoblastic differentiation markers osteocalcin and osf2/Cbfa-1. The effects of elevated phosphate on HSMC were mediated by a sodium-dependent phosphate cotransporter (NPC) as indicated by the ability of the specific NPC inhibitor phosphonoformic acid to dose-dependently inhibit phosphate-induced calcium deposition as well as osteocalcin and Cbfa-1 gene expression. The NPC in HSMC was identified as Pit-1, a member of the novel type III NPCs. These data suggest that elevated phosphate may directly stimulate HSMC to undergo phenotypic changes that predispose to calcification and offers a novel explanation of the phenomenon of vascular calcification under hyperphosphatemic conditions. Furthermore, we examined the factors affecting peripheral vascular calcification in 332 nondiabetic hemodialysis patients. There were 45 nondiabetic patients with vascular calcification. In multivariate logistic regression, the significant factors affecting vascular calcification were advanced age, longer duration of hemodialysis, increased phosphate concentrations, male gender, and lower predialysis diastolic pressure. Our findings suggest that an elevated phosphate level may directly stimulate HSMC to undergo phenotypic changes that predispose to calcification and offer a novel explanation of the phenomenon of vascular calcification under hyperphosphatemic conditions.

A novel chemical modification of bioprosthetic tissues using L-arginine

A novel chemical modification of biological tissues was developed by the direct coupling of bioactive molecule, L-arginine to bovine pericardium (BP). The modification involves pretreatment of BP using GA and followed by grafting arginine to BP by the reaction of residual aldehyde and amine group of L-arginine. BP was modified by direct coupling of bioactive molecules and the effect of L-arginine coupling on calcification and biocompatibility was evaluated in vitro and in vivo. Modified BPs were characterized by measuring shrinkage temperature, mechanical properties, digestion resistance to collagenase enzyme, in vitro plasma protein adsorption and platelet adhesion, and in vivo calcification. Thermal and mechanical properties showed that the durability of arginine treated tissue increased as compared with fresh tissue and GA treated tissue. Resistance to collagenase digestion revealed that modified tissues have greater resistance to enzyme digestion than did fresh tissue and GA treated tissue. Lower protein adsorption and platelet adhesion were observed on modified tissue than non-modified tissue. In vivo calcification study demonstrated much less calcium deposition on arginine treated BP than GA treated one. Obtained results attest to the usefulness of L-arginine treated BP for cardiovascular bioprostheses.

Calcification resistance with aluminum-ethanol treated porcine aortic valve bioprostheses in juvenile sheep

BACKGROUND

Calcification of glutaraldehyde fixed bioprosthetic heart valve replacements frequently leads to the clinical failure of these devices. Previous research by our group has demonstrated that ethanol pretreatment prevents bioprosthetic cusp calcification, but not aortic wall calcification. We have also shown that aluminum chloride pretreatment prevents bioprosthetic aortic wall calcification. This study evaluated the combined use of aluminum and ethanol to prevent both bioprosthetic porcine aortic valve cusp and aortic wall calcification in rat subcutaneous implants, and the juvenile sheep mitral valve replacement model.

METHODS

Glutaraldehyde fixed cusps and aortic wall samples were pretreated sequentially first with aluminum chloride (AlCl3) followed by ethanol pretreatment. These samples were then implanted subdermally in rats with explants at 21 and 63 days. Stent mounted bioprostheses were prepared either sequentially as previously described or differentially with AlCl3 exposure restricted to the aortic wall followed by ethanol pretreatment. Mitral valve replacements were carried out in juvenile sheep with elective retrievals at 90 days.

RESULTS

Rat subdermal explants demonstrated that sequential exposure to AlCl3 and ethanol completely inhibited bioprosthetic cusp and aortic wall calcification compared with controls. However the sheep results were markedly different. The differential sheep explant group exhibited very low levels of cusp and wall calcium. The glutaraldehyde group exhibited little cusp calcification, but prominent aortic wall calcification. All sheep in the two groups previously described lived to term without evidence of valvular dysfunction. In contrast, animals in the sequential group exhibited increased levels of cusp calcification. None of the animals in this group survived to term. Pathologic analysis of the valves in the sequential group determined that valve failure was caused by calcification and stenosis of the aortic cusps.

CONCLUSIONS

The results clearly demonstrate that a combination of aluminum and ethanol reduced aortic wall calcification and prevented cuspal calcification. Furthermore, this study demonstrates that exclusion of aluminum from the cusp eliminated the cuspal calcification seen when aluminum and ethanol treatments were administered in a sequential manner.

Aluminum chloride pretreatment of elastin inhibits elastolysis by matrix metalloproteinases and leads to inhibition of elastin-oriented calcification

Calcification of elastin occurs in many pathological cardiovascular diseases including atherosclerosis. We have previously shown that purified elastin when subdermally implanted in rats undergoes severe calcification and aluminum chloride (AlCl(3)) pretreatment of elastin inhibits calcification. In the present study we investigated whether matrix metalloproteinase (MMP) binding to elastin and elastin degradation is prevented by AlCl(3) pretreatment. Subdermal implantation of AlCl(3)-pretreated elastin showed significantly lower MMP-9 and MMP-2 activity surrounding the implant as compared to the control implants. AlCl(3) pretreatment also significantly inhibited elastin implant calcification at the seven-day implant period (AlCl(3)-pretreated 4.07 +/- 1.27, control 23.82 +/- 2.24 microg/mg; p<0.0001). Moreover, elastin gel zymography studies showed that gel pretreatment with AlCl(3) inhibited elastolysis by MMP-9. We also demonstrate significant suppression of MMP-2 activity in aortic wall segments of AlCl(3)-pretreated porcine bioprosthetic heart valve implants as compared to control valve implants in sheep mitral valve replacement studies. AlCl(3) pretreatment also significantly inhibited calcification of elastin in this model. Thus, we conclude that aluminum ion binding to elastin prevents MMP-mediated elastolysis and thus prevents elastin calcification.

Tissue reactions to epoxy-crosslinked porcine heart valves post-treated with detergents or a dicarboxylic acid

Calcification limits the long-term durability of xenograft glutaraldehyde (GA)-crosslinked heart valves. Previously, a study in rats showed that epoxy-crosslinked heart valves reduced lymphocyte reactions to the same extent as the GA-crosslinked control and induced a similar foreign-body response and calcification reaction. The present study was aimed at reducing the occurrence of calcification of epoxy-crosslinked tissue. Two modifications were carried out and their influence on cellular reactions and the extent of calcification after 8 weeks' implantation in weanling rats was evaluated. First, epoxy-crosslinked valves were post-treated with two detergents to remove cellular elements, phospholipids and small soluble proteins, known to act as nucleation sites for calcification. The second approach was to study the effect of the impaired balance between negatively and positively charged amino acids by an additional crosslinking step with a dicarboxylic acid. The detergent treatment resulted in a washed-out appearance of especially the cusp tissue. With the dicarboxylic acid, both the cusps and the walls had a limited washed-out appearance. The wall also demonstrated some detachment of the subendothelium. After implantation, both detergent and dicarboxylic acid post-treatment histologically resulted in reduced calcification at the edges of cusps and walls. However, total amounts of calcification, measured by atomic emission spectroscopy, were not significantly reduced. Data concerning the presence of lymphocytes varied slightly, but were in the same range as the GA-crosslinked control, i.e., clearly reduced compared with a noncrosslinked control. It is concluded that both the double detergent and the dicarboxylic acid post-treatment of epoxy-crosslinked heart valve tissue do not represent a sound alternative in the fabrication of heart valve bioprostheses.

Dimethyl 3,3'-dithiobispropionimidate: a novel crosslinking reagent for collagen

Crosslinking agents are used for improving the physical properties and durability of collagenous implants, glutaraldehyde (GTA) being the most widely used. Many of these reagents, including GTA, are known to be cytotoxic and to induce calcification. Hence, it is desirable to develop new crosslinking methods for collagen, so that biocompatibility and physical properties are improved. In the present study, dimethyl 3,3' -dithiobispropionimidate (DTBP) has been tried as a novel crosslinking reagent for collagen. Collagen purified from rat tail tendon has been crosslinked with DTBP and GTA. An increase of 22 degrees C in shrinkage temperature is observed for collagen treated with DTBP under optimal conditions. Crosslinking density determination shows that DTBP induces 10 crosslinks per mole, compared to 13 by GTA. While the tensile strength of GTA-treated samples is greater than those treated with DTBP, the latter shows more extensibility. In vitro degradation studies show that both GTA- and DTBP-treated samples are resistant to degradation by collagenase. The biocompatibility of crosslinked collagen samples studied by subcutaneous implantation in rats show that while both GTA- and DTBP-treated collagen do not degrade for up to 4 weeks, ultrastructural and histological studies indicate that DTBP collagen is far more biocompatible than GTA-treated matrices.

Phosphate regulation of vascular smooth muscle cell calcification

Vascular calcification is a common finding in atherosclerosis and a serious problem in diabetic and uremic patients. Because of the correlation of hyperphosphatemia and vascular calcification, the ability of extracellular inorganic phosphate levels to regulate human aortic smooth muscle cell (HSMC) culture mineralization in vitro was examined. HSMCs cultured in media containing normal physiological levels of inorganic phosphate (1.4 mmol/L) did not mineralize. In contrast, HSMCs cultured in media containing phosphate levels comparable to those seen in hyperphosphatemic individuals (>1.4 mmol/L) showed dose-dependent increases in mineral deposition. Mechanistic studies revealed that elevated phosphate treatment of HSMCs also enhanced the expression of the osteoblastic differentiation markers osteocalcin and Cbfa-1. The effects of elevated phosphate on HSMCs were mediated by a sodium-dependent phosphate cotransporter (NPC), as indicated by the ability of the specific NPC inhibitor phosphonoformic acid, to dose dependently inhibit phosphate-induced calcium deposition as well as osteocalcin and Cbfa-1 gene expression. With the use of polymerase chain reaction and Northern blot analyses, the NPC in HSMCs was identified as Pit-1 (Glvr-1), a member of the novel type III NPCs. These data suggest that elevated phosphate may directly stimulate HSMCs to undergo phenotypic changes that predispose to calcification and offer a novel explanation of the phenomenon of vascular calcification under hyperphosphatemic conditions. The full text of this article is available at http://www.circresaha.org.

In vivo behavior of epoxy-crosslinked porcine heart valve cusps and walls

Calcification limits the long-term durability of xenograft glutaraldehyde-crosslinked heart valves. In this study, epoxy-crosslinked porcine aortic valve tissue was evaluated after subcutaneous implantation in weanling rats. Non-crosslinked valves and valves crosslinked with glutaraldehyde or carbodiimide functioned as control. Epoxy-crosslinked valves had somewhat lower shrinkage temperatures than the crosslinked controls, and within the series also some macroscopic and microscopic differences were obvious. After 8 weeks implantation, cusps from non-crosslinked valves were not retrieved. The matching walls were more degraded than the epoxy- and control-crosslinked walls. This was observed from the higher cellular ingrowth with fibroblasts, macrophages, and giant cells. Furthermore, non-crosslinked walls showed highest numbers of lymphocytes, which were most obvious in the capsules. Epoxy- and control-crosslinked cusps and walls induced lower reactions. Calcification, measured by von Kossa-staining and by Ca-analysis, was always observed. Crosslinked cusps calcified more than walls. Of all wall samples, the non-crosslinked walls showed the highest calcification. It is concluded that epoxy-crosslinked valve tissue induced a foreign body and calcification reaction similar to the two crosslinked controls. Therefore, epoxy-crosslinking does not represent a solution for the calcification problem of heart valve bioprostheses.

Synergistic inhibition of calcification of porcine aortic root with preincubation in FeCl3 and alpha-amino oleic acid in a rat subdermal model

Postimplant calcific degeneration is a frequent cause of clinical failure of glutaraldehyde crosslinked porcine aortic valve bioprostheses. We demonstrated previously in rat subdermal and circulatory implants that alpha-amino oleic acid used as a bioprosthesis pretreatment was highly effective in mitigating aortic valve cusp but not aortic wall calcification. In this study we investigated the feasibility of synergistically applying two proven anticalcification agents (alpha-amino oleic acid and FeCl3) as pretreatments for mitigating both bioprosthetic cusp and aortic wall calcification. alpha-Amino oleic acid is hypothesized to prevent calcification by disrupting calcium phosphate formation kinetics, whereas suppression of alkaline phosphatase activity and ferric-phosphate complexation at a cellular membrane initiation sites may be important factors in ferric ion's inhibition of calcification. In vivo implant studies (21-day rat subdermal model) indicated that individually FeCl3 (0.01 or 0.1 M for 24 h) or alpha-amino oleic acid (saturated solution) treatments were equally effective in mitigating cuspal calcification (tissue calcium levels: 30.2 +/- 10.2, 29.8 +/- 2.7, and 31.6 +/- 7.8 micrograms/mg tissue, respectively). However, sequential application of first alpha-amino oleic acid and then FeCl3 synergistically reduced aortic wall calcification more effectively than either of the agents alone. The benefit of a synergistic application of two anticalcification treatments, alpha-amino oleic acid and FeCl3, was demonstrated. However, the synergistic effect was observed on aortic wall only at a higher FeCl3 concentration. (i.e., 0.1 M).

Model experimental system for investigation of heart valve calcification in vitro

A model system was developed for the in vitro quantitative investigation of the calcification process occurring in heart valves. The process of heart valve calcification consists of the formation of calcium phosphates at the heart valve-biological fluid interface. Calcium phosphate deposits may consist of more than one calcium phosphate mineral phase, differing with respect to their physical and chemical properties. The kinetics of the formation of hydroxyapatite, the model inorganic compound for the calcified deposits, was precisely monitored in a reactor containing supersaturated calcium phosphate solutions in which the heart valves were immersed after being treated with glutaraldehyde and mounted on special racks. The precipitation process, accompanied with proton release in the solution, was monitored by a pair of glass-saturated calomel electrodes. Upon initiation of the formation of calcium phosphate deposits, the supersaturation in the working solution was reestablished through the addition of titrant solutions made with the appropriate concentration to compensate for the ions precipitated. With this methodology, not only the rates were measured very precisely but also the nucleation capability of the various substrates could be evaluated. Moreover, it was possible to identify the formation of intermediate calcium phosphate phases formed during the calcification process. Valves previously treated with glutaraldehyde were shown to nucleate octacalcium phosphate, which at lower supersaturations converted to the thermodynamically more stable hydroxyapatite. The rates measured were found to depend on the solution supersaturation, while the apparent order of the precipitation process was found to be 1.

Heparin coupling in inhibition of calcification of vascular bioprostheses

Inhibitory effect of heparin coupling on calcification of bioprosthetic vascular grafts of different origin was studied. Heparin-bonded (Hep) and 0.625% glutaraldehyde-cross-linked (GA) segments of porcine thoracic aorta (AO), pulmonary artery (PA), jugular vein (JV) and rabbit aorta (RA) were implanted subcutaneously in weanling rats for 5 months. Heparin bonding is ineffective in prevention of calcification of JV (Hep: Ca, 159 +/- 32.26 mg g-1; GA: Ca, 193.55 +/- 17.81; p = 0.075) and RA (Hep: Ca, 150.17 +/- 14.78; GA: Ca, 192.12 +/- 26.61; p = 0.015). Calcium content of heparin-coupled PA and AO was significantly less when compared with their GA-treated counterparts. Calcification inhibition was achieved to a greater extent in heparin-bonded PA (Hep: Ca = 22.62 +/- 5.72, GA: Ca = 115.99 +/- 21.91, p < 0.0001) than in the AO coupled to heparin (Hep: Ca = 63.77 +/- 22.75, GA: Ca = 150.40 +/- 35.21, p < 0.0001). Elastin fibers were the predominant site of calcification in all explanted vascular grafts. Heparin-bonded porcine pulmonary artery is seemed to be the best among all vascular bioprostheses in this study.

Elastin calcification and its prevention with aluminum chloride pretreatment

Elastin, an abundant structural protein present in the arterial wall, is prone to calcification in a number of disease processes including porcine bioprosthetic heart valve calcification and atherosclerosis. The mechanisms of elastin calcification are not completely elucidated. In the present work, we demonstrated calcification of purified elastin in rat subdermal implants (Ca(2+) = 89.73 +/- 9.84 microgram/mg after 21 days versus control, unimplanted Ca(2+) = 0.16 +/- 0.04 microgram/mg). X-ray diffraction analysis along with resolution enhanced FTIR spectroscopy demonstrated the mineral phase to be a poorly crystalline hydroxyapatite. We investigated the time course of calcification, the effect of glutaraldehyde crosslinking on calcification, and mechanisms of inhibition of elastin calcification by pretreatment with aluminum chloride (AlCl(3)). Glutaraldehyde pretreatment did not affect calcification (Ca(2+) = 89.06 +/- 17.93 microgram/mg for glutaraldehyde crosslinked elastin versus Ca(2+) = 89.73 +/- 9.84 microgram/mg for uncrosslinked elastin). This may be explained by radioactive ((3)H) glutaraldehyde studies showing very low reactivity between glutaraldehyde and elastin. Our results further demonstrated that AlCl(3) pretreatment of elastin led to complete inhibition of elastin calcification using 21-day rat subdermal implants, irrespective of glutaraldehyde crosslinking (Ca(2+) = 0.73-2.15 microgram/mg for AlCl(3) pretreated elastin versus 89.73 +/- 9.84 for untreated elastin). The AlCl(3) pretreatment caused irreversible binding of aluminum ions to elastin, as assessed by atomic emission spectroscopy. Moreover, aluminum ion binding altered the spatial configuration of elastin as shown by circular dichroism (CD), Fourier transform infrared (FTIR), and (13)C nuclear magnetic resonance (NMR) spectroscopy studies, suggesting a net structural change including a reduction in the extent of beta sheet structures and an increase in coil-turn conformations. Thus, it is concluded that purified elastin calcifies in rat subdermal implants, and that the AlCl(3)-pretreated elastin completely resists calcification due to irreversible aluminum ion binding and subsequent structural alterations caused by AlCl(3).

Changes in serum conditioning profiles of glutaraldehyde-crosslinked collagen sponges after their treatment with calcification inhibitors

The purpose of this study was to evaluate the effects of the calcification inhibitors FeCl3 and sodium dodecyl sulfate (SDS) on the morphology of glutaraldehyde-crosslinked type I collagen sponges and on their serum conditioning. Scanning electron microscopy (SEM) showed that the morphology of the sponges, already modified by glutaraldehyde crosslinking, underwent further changes after treatment of the hydrogels with inhibitors. Coral-like structures were found to branch from the bulk of the material especially in the case of SDS-treated samples. The composition and morphology of the conditioning layers was characterized after 48 h incubation in serum by SDS-polyacrylamide gel electrophoresis-immunoblot of the adsorbed proteins, by energy-dispersive X-ray analysis of the elements (EDX), and by SEM of the conditioned surfaces. All the samples showed the adsorption of proteins with molecular weights ranging from 10 to 203 kD. However, the peculiar adsorption of an approximately 10-kD band (complement C3 fragment) and of fibronectin were detected in the case of glutaraldehyde-crosslinked collagen. On the other hand, glutaraldehyde-crosslinked collagen treated with 0.1M FeCl3 showed the remarkable adsorption of a 29-kD band. The glutaraldehyde-crosslinked hydrogels showed the massive precipitation of crystals on their exposed surfaces, whereas a disordered network structure surrounding the collagen fibrils was found in the case of the samples pretreated with inhibitors. A predominant precipitation of sodium and chloride was detected in all the sponges, although the ratio between the peaks changed from from one hydrogel to another. The results reported in this article clearly indicate that the treatments with SDS and FeCl3 change the surface conditioning of collagen sponges, suggesting a possible role of deposited serum solutes in affecting mineralization processes on bioprosthesis.

The role of proteins in the nucleation and formation of calcium-containing deposits on biomaterial surfaces

In experiments in vivo using diffusion chambers, the morphology and composition of calcium-containing deposits on natural and artificial biomaterials that had no direct contact with cells were studied using scanning electron microscopy with energy dispersion X-ray microanalysis. It was revealed that the formation of a protein layer containing protein-calcium complexes is the key event in biomaterial calcification. A mechanism of formation of a calcium-containing protein matrix that creates the conditions for supersaturation of the crystal-forming medium over critical value has been proposed. The formation of nuclei of insoluble calcium phosphate starts predominantly deep in an adsorbed protein layer enriched by calcium ions.