Canonical antigen-binding loop structures in immunoglobulins: more structures, more canonical classes?

Development of SNAP-Tag Based Nanobodies as Secondary Antibody Mimics for Indirect Immunofluorescence Assays

The immunofluorescence assay is widely used for cellular biology and diagnosis applications. Such an antigen-antibody detection system enables the assessment and visualization of the expression and localization of target proteins. In the classical indirect immunofluorescence assay, secondary antibodies are conjugated to fluorophores. However, conventional secondary antibodies have limited applications due to their large size (150 kDa). Moreover, as animal-derived products, secondary antibodies are associated with ethical concerns and batch-to-batch variability. In this study, we developed fluorescence-labeled recombinant nanobodies as secondary antibodies by utilizing previously established anti-mouse and anti-rabbit IgG secondary nanobodies in combination with the self-labeling SNAP-tag. Nanobodies, which are significantly smaller (15 kDa), are capable to detect primary antibodies produced in mice and rabbits. The SNAP-tag (20 kDa) enables site-specific binding of various O6-benzylguanine (BG)-modified fluorophores to the recombinant nanobodies. These recombinant nanobodies were produced using mammalian cell expression system, and their specific binding to mouse or rabbit antibodies was validated using flow cytometry and multi-color fluorescence microscopy. The low cost, easy of expression, purification and site-specific conjugation procedures for these anti-mouse and anti-rabbit IgG secondary nanobodies make them an attractive alternative to traditional secondary antibodies for indirect immunofluorescence assays.

A Cryptic Loop that Modulates Protein-Protein Interaction: Implications in PfAMA1-PfRON2 Late-stage Binding Event

Disease-related protein-protein interactions are important molecular targets for drug discovery campaigns. The dynamics of a disordered loop, which are commonly found in the receptor binding domain of many proteins, often plays a decisive role during protein-protein or protein-small molecule binding events. One notable example is the interactions between two proteins from Plasmodium falciparum, PfAMA1-PfRON2, which are crucial for the malaria parasite's invasion into human red blood cells. A thorough understanding of the interactions between these macromolecular binding partners is important for designing better therapeutics against this ancient disease. The available crystal structures of the PfAMA1-PfRON2 complex show insufficient electron density, making it challenging to fully understand the molecular-level association of the domain II (DII) loop with the PfRON2. To address this, we have computationally simulated the dynamics and free energetics of DII loop closing processes, identifying a set of key amino acid residues in the PfRON2 helix that are essential for binding. The subsequent experimental validation of the relative importance of residues in context provides a comprehensive understanding of the molecular recognition event between PfAMA1 and PfRON2, specifically in the post-binding stage. This insight could potentially open up new avenues to drug discovery against malaria.

Development of Broad-Spectrum Nanobodies for the Therapy and Diagnosis of SARS-CoV-2 and Its Multiple Variants

The continuous evolution of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has evaded the efficacy of previously developed antibodies and vaccines, thus remaining a significant global public health threat. Therefore, it is imperative to develop additional antibodies that are capable of neutralizing emerging variants. Nanobodies, as the smallest functional single-domain antibodies, exhibit enhanced stability and penetration ability, enabling them to recognize numerous concealed epitopes that are inaccessible to conventional antibodies. Herein, we constructed an immune library based on the immunization of alpaca with the S1 subunit of the SARS-CoV-2 spike protein, from which two nanobodies, Nb1 and Nb2, were selected using phage display technology for further characterization. Both nanobodies, with the binding residues residing within the receptor-binding domain (RBD) region of the spike, exhibited high affinity toward the S1 subunit. Moreover, they displayed cross-neutralizing activity against both wild-type SARS-CoV-2 and 10 ο variants, including BA.1, BA.2, BA.3, BA.5, BA.2.75, BF.7, BQ.1, EG.5.1, XBB.1.5, and JN.1. Molecular modeling and dynamics simulations predicted that both nanobodies interacted with the viral RBD through their complementarity determining region 1 (CDR1) and CDR2. These two nanobodies are novel tools for the development of therapeutic and diagnostic countermeasures targeting SARS-CoV-2 variants and potentially emerging coronaviruses.

De Novo Synthesis and Structural Elucidation of CDR-H3 Loop Mimics

The binding affinity of antibodies to specific antigens stems from a remarkably broad repertoire of hypervariable loops known as complementarity-determining regions (CDRs). While recognizing the pivotal role of the heavy-chain 3 CDRs (CDR-H3s) in maximizing antibody-antigen affinity and specificity, the key structural determinants responsible for their adaptability to diverse loop sequences, lengths, and noncanonical structures are hitherto unknown. To address this question, we achieved a de novo synthesis of bulged CDR-H3 mimics excised from their full antibody context. CD and NMR data revealed that these stable standalone β-hairpin scaffolds are well-folded and retain many of the native bulge CDR-H3 features in water. In particular, the tryptophan residue, highly conserved across CDR-H3 sequences, was found to extend the kinked base of these β-bulges through a combination of stabilizing intramolecular hydrogen bond and CH/π interaction. The structural ensemble consistent with our NMR observations exposed the dynamic nature of residues at the base of the loop, suggesting that β-bulges act as molecular hinges connecting the rigid stem to the more flexible loops of CDR-H3s. We anticipate that this deeper structural understanding of CDR-H3s will lay the foundation to inform the design of antibody drugs broadly and engineer novel CDR-H3 peptide scaffolds as therapeutics.

NANOBODIES®: A Review of Diagnostic and Therapeutic Applications

NANOBODY® (a registered trademark of Ablynx N.V) molecules (Nbs), also referred to as single domain-based VHHs, are antibody fragments derived from heavy-chain only IgG antibodies found in the Camelidae family. Due to their small size, simple structure, high antigen binding affinity, and remarkable stability in extreme conditions, nanobodies possess the potential to overcome several of the limitations of conventional monoclonal antibodies. For many years, nanobodies have been of great interest in a wide variety of research fields, particularly in the diagnosis and treatment of diseases. This culminated in the approval of the world's first nanobody based drug (Caplacizumab) in 2018 with others following soon thereafter. This review will provide an overview, with examples, of (i) the structure and advantages of nanobodies compared to conventional monoclonal antibodies, (ii) methods used to generate and produce antigen-specific nanobodies, (iii) applications for diagnostics, and (iv) ongoing clinical trials for nanobody therapeutics as well as promising candidates for clinical development.

Structural Classification of CDR-H3 in Single-Domain VHH Antibodies

The immune systems protect vertebrates from foreign molecules or antigens, and antibodies are important mediators of this system. The sequences and structural features of antibodies vary depending on species. Many of antibodies from vertebrates, including camelids, have both heavy and light chain variable domains, but camelids also have antibodies that lack the light chains. In antibodies that lack light chains, the C-terminal variable region is called the V_HH domain. Antibodies recognize antigens through six complementarity-determining regions (CDRs). The third CDR of the heavy chain (CDR-H3) is at the center of the antigen-binding site and is diverse in terms of sequence and structure. Due to the importance of antibodies in basic science as well as in medical applications, there have been many studies of CDR-H3s of antibodies that possess both light and heavy chains. However, nature of CDR-H3s of single-domain V_HH antibodies is less well studied. In this chapter, we describe current knowledge of sequence-structure-function correlations of single-domain V_HH antibodies with emphasis on CDR-H3. Based on the 370 crystal structures in the Protein Data Bank, we also attempt structural classification of CDR-H3 in single-domain V_HH antibodies and discuss lessons learned from the ever-increasing number of the structures.

Shape Complementarity Optimization of Antibody–Antigen Interfaces: The Application to SARS-CoV-2 Spike Protein

Many factors influence biomolecule binding, and its assessment constitutes an elusive challenge in computational structural biology. In this aspect, the evaluation of shape complementarity at molecular interfaces is one of the main factors to be considered. We focus on the particular case of antibody–antigen complexes to quantify the complementarities occurring at molecular interfaces. We relied on a method we recently developed, which employs the 2D Zernike descriptors, to characterize the investigated regions with an ordered set of numbers summarizing the local shape properties. Collecting a structural dataset of antibody–antigen complexes, we applied this method and we statistically distinguished, in terms of shape complementarity, pairs of the interacting regions from the non-interacting ones. Thus, we set up a novel computational strategy based on in silico mutagenesis of antibody-binding site residues. We developed a Monte Carlo procedure to increase the shape complementarity between the antibody paratope and a given epitope on a target protein surface. We applied our protocol against several molecular targets in SARS-CoV-2 spike protein, known to be indispensable for viral cell invasion. We, therefore, optimized the shape of template antibodies for the interaction with such regions. As the last step of our procedure, we performed an independent molecular docking validation of the results of our Monte Carlo simulations.

Downsizing antibodies: Towards complementarity-determining region (CDR)-based peptide mimetics

Monoclonal antibodies emerged as an important therapeutic drug class with remarkable specificity and binding affinity. Nonetheless, these heterotetrameric immunoglobulin proteins come with high manufacturing and therapeutic costs which can take extraordinary proportions, besides other limitations such as their limited in cellulo access imposed by their molecular size (ca. 150 kDa). These drawbacks stimulated the development of downsized functional antibody fragments (ca. 15-50 kDa), together with smaller synthetic peptides (ca. 1-3 kDa) derived from the antibodies' crucial complementarity-determining regions (CDR). Despite the general lack of success in the literal translation of CDR loops in peptide mimetics, rational structure-based and computational approaches have shown their potential for obtaining functional CDR-based peptide mimetics. In this review, we describe the efforts made in the development of antibody and nanobody paratope-derived peptide mimetics with particular focus on the used design strategies, in addition to highlighting the challenges associated with their development.

A comprehensive comparison between camelid nanobodies and single chain variable fragments

By the emergence of recombinant DNA technology, many antibody fragments have been developed devoid of undesired properties of natural immunoglobulins. Among them, camelid heavy-chain variable domains (VHHs) and single-chain variable fragments (scFvs) are the most favored ones. While scFv is used widely in various applications, camelid antibodies (VHHs) can serve as an alternative because of their superior chemical and physical properties such as higher solubility, stability, smaller size, and lower production cost. Here, these two counterparts are compared in structure and properties to identify which one is more suitable for each of their various therapeutic, diagnosis, and research applications.

Application of Single-Domain Antibodies ("Nanobodies") to Laboratory Diagnosis

Antibodies have proven to be central in the development of diagnostic methods over decades, moving from polyclonal antibodies to the milestone development of monoclonal antibodies. Although monoclonal antibodies play a valuable role in diagnosis, their production is technically demanding and can be expensive. The large size of monoclonal antibodies (150 kDa) makes their re-engineering using recombinant methods a challenge. Single-domain antibodies, such as “nanobodies,” are a relatively new class of diagnostic probes that originated serendipitously during the assay of camel serum. The immune system of the camelid family (camels, llamas, and alpacas) has evolved uniquely to produce heavy-chain antibodies that contain a single monomeric variable antibody domain in a smaller functional unit of 12–15 kDa. Interestingly, the same biological phenomenon is observed in sharks. Since a single-domain antibody molecule is smaller than a conventional mammalian antibody, recombinant engineering and protein expression in vitro using bacterial production systems are much simpler. The entire gene encoding such an antibody can be cloned and expressed in vitro. Single-domain antibodies are very stable and heat-resistant, and hence do not require cold storage, especially when incorporated into a diagnostic kit. Their simple genetic structure allows easy re-engineering of the protein to introduce new antigen-binding characteristics or attach labels. Here, we review the applications of single-domain antibodies in laboratory diagnosis and discuss the future potential in this area.

Quantitative Description of Surface Complementarity of Antibody-Antigen Interfaces

Antibodies have the remarkable ability to recognise their cognate antigens with extraordinary affinity and specificity. Discerning the rules that define antibody-antigen recognition is a fundamental step in the rational design and engineering of functional antibodies with desired properties. In this study we apply the 3D Zernike formalism to the analysis of the surface properties of the antibody complementary determining regions (CDRs). Our results show that shape and electrostatic 3DZD descriptors of the surface of the CDRs are predictive of antigen specificity, with classification accuracy of 81% and area under the receiver operating characteristic curve (AUC) of 0.85. Additionally, while in terms of surface size, solvent accessibility and amino acid composition, antibody epitopes are typically not distinguishable from non-epitope, solvent-exposed regions of the antigen, the 3DZD descriptors detect significantly higher surface complementarity to the paratope, and are able to predict correct paratope-epitope interaction with an AUC = 0.75.

HER2-directed antibodies, affibodies and nanobodies as drug-delivery vehicles in breast cancer with a specific focus on radioimmunotherapy and radioimmunoimaging

PURPOSE

The aim of the present paper is to review the role of HER2 antibodies, affibodies and nanobodies as vehicles for imaging and therapy approaches in breast cancer, including a detailed look at recent clinical data from antibody drug conjugates and nanobodies as well as affibodies that are currently under development.

RESULTS

Clinical and preclinical studies have shown that the use of monoclonal antibodies in molecular imaging is impaired by slow blood clearance, associated with slow and low tumor uptake and with limited tumor penetration potential. Antibody fragments, such as nanobodies, on the other hand, can be radiolabelled with short-lived radioisotopes and provide high-contrast images within a few hours after injection, allowing early diagnosis and reduced radiation exposure of patients. Even in therapy, the small radioactively labeled nanobodies prove to be superior to radioactively labeled monoclonal antibodies due to their higher specificity and their ability to penetrate the tumor.

CONCLUSION

While monoclonal antibodies are well established drug delivery vehicles, the current literature on molecular imaging supports the notion that antibody fragments, such as affibodies or nanobodies, might be superior in this approach.

Modeling Immunity with Rosetta: Methods for Antibody and Antigen Design

Structure-based antibody and antigen design has advanced greatly in recent years, due not only to the increasing availability of experimentally determined structures but also to improved computational methods for both prediction and design. Constant improvements in performance within the Rosetta software suite for biomolecular modeling have given rise to a greater breadth of structure prediction, including docking and design application cases for antibody and antigen modeling. Here, we present an overview of current protocols for antibody and antigen modeling using Rosetta and exemplify those by detailed tutorials originally developed for a Rosetta workshop at Vanderbilt University. These tutorials cover antibody structure prediction, docking, and design and antigen design strategies, including the addition of glycans in Rosetta. We expect that these materials will allow novice users to apply Rosetta in their own projects for modeling antibodies and antigens.

Development and characterization of protein kinase B/AKT isoform-specific nanobodies

The serine/threonine protein kinase AKT is frequently over-activated in cancer and is associated with poor prognosis. As a central node in the PI3K/AKT/mTOR pathway, which regulates various processes considered to be hallmarks of cancer, this kinase has become a prime target for cancer therapy. However, AKT has proven to be a highly complex target as it comes in three isoforms (AKT1, AKT2 and AKT3) which are highly homologous, yet non-redundant. The isoform-specific functions of the AKT kinases can be dependent on context (i.e. different types of cancer) and even opposed to one another. To date, there is no isoform-specific inhibitor available and no alternative to genetic approaches to study the function of a single AKT isoform. We have developed and characterized nanobodies that specifically interact with the AKT1 or AKT2 isoforms. These new tools should enable future studies of AKT1 and AKT2 isoform-specific functions. Furthermore, for both isoforms we obtained a nanobody that interferes with the AKT-PIP3-interaction, an essential step in the activation of the kinase. The nanobodies characterized in this study are a new stepping stone towards unravelling AKT isoform-specific signalling.

Epitope mapping of the White Spot Syndrome Virus (WSSV) VP28 monoclonal antibody through combined in silico and in vitro analysis reveals the potential antibody binding site

White Spot Syndrome Virus (WSSV) infecting shrimp is an enveloped double-stranded DNA virus. The WSSV is a member of the genus Whispovirus. The envelope protein VP28 is the most investigated protein of WSSV. In the present study, the epitope mapping of the monoclonal antibody (MAb) C-33 was carried out. Based on the epitope mapping results, an antigen-antibody interaction model was derived. Peptide scanning and confirmation of epitopes of MAb C-33 were carried out using the sequence data. The MAb was reactive to the epitope of both recombinant VP28 and the whole virus. The results of the study indicated the presence of an epitope region. The epitope region is found positioned within two peptides, covering 13 amino acids. Framework and CDR (complementarity determining regions) of heavy and light chain (VH & VL) sequences showed identity to germline immunoglobulin sequences. The Web Antibody Modelling (WAM) selected for further evaluation based on a comparative analysis of WAM and Rosetta server-generated models of the Fv region. The docking study using WAM generated model revealed that the residues from LEU98 to GLY105 are active in antibody binding. The findings of this study could form a structural basis for further research in VP28 based diagnostics and therapeutics or vaccine discovery.

Nanobodies in Human Infections: Prevention, Detection, and Treatment

Despite the existence of vaccination, antibiotic therapy, and antibody therapies, infectious diseases still remain as one of the biggest challenges to human health all over the world. Among the different methods for treatment and prevention of infectious diseases, antibodies are well known but poorly developed. There is a new subclass of antibodies calledheavy-chain antibodies that belong to the IgG isotype. However, they are low in molecular weight and lost the first constant domain (CH1). Their single-domain antigen-binding fragments, identified as nanobodies, have unique characteristics, which make them superior in comparison with the conventional antibodies. Low molecular weight and small size, high stability and solubility, ease of expression, good tissue penetration, and low-cost production make nanobodies an appropriate alternative to use against infectious disease. In this research, we review the properties of nanobodies and their potential applications in controlling human infections and inflammations.

PIGSPro: prediction of immunoGlobulin structures v2

PIGSpro is a significant upgrade of the popular PIGS server for the prediction of the structure of immunoglobulins. The software has been completely rewritten in python following a similar pipeline as in the original method, but including, at various steps, relevant modifications found to improve its prediction accuracy, as demonstrated here. The steps of the pipeline include the selection of the appropriate framework for predicting the conserved regions of the molecule by homology; the target template alignment for this portion of the molecule; the selection of the main chain conformation of the hypervariable loops according to the canonical structure model, the prediction of the third loop of the heavy chain (H3) for which complete canonical structures are not available and the packing of the light and heavy chain if derived from different templates. Each of these steps has been improved including updated methods developed along the years. Last but not least, the user interface has been completely redesigned and an automatic monthly update of the underlying database has been implemented. The method is available as a web server at http://biocomputing.it/pigspro.

Structural Basis of Epitope Recognition by Heavy-Chain Camelid Antibodies

Truncated versions of heavy-chain antibodies (HCAbs) from camelids, also termed nanobodies, comprise only one-tenth the mass of conventional antibodies, yet retain similar, high binding affinities for the antigens. Here we analyze a large data set of nanobody-antigen crystal structures and investigate how nanobody-antigen recognition compares to the one by conventional antibodies. We find that nanobody paratopes are enriched in aromatic residues just like conventional antibodies, but additionally, they also bear a more hydrophobic character. Most striking differences were observed in the characteristics of the antigen's epitope. Unlike conventional antibodies, nanobodies bind to more rigid, concave, conserved and structured epitopes enriched with aromatic residues. Nanobodies establish fewer interactions with the antigens compared to conventional antibodies, and we speculate that high binding affinities are achieved due to less unfavorable conformational and more favorable solvation entropy contributions. We observed that interactions with antigen are mediated not only by three CDR loops but also by numerous residues from the nanobody framework. These residues are not distributed uniformly; rather, they are concentrated into four structurally distinct regions and mediate mostly charged interactions. Our findings suggest that in some respects nanobody-antigen interactions are more similar to the general protein-protein interactions rather than antibody-antigen interactions.

Comparative analysis of nanobody sequence and structure data

Nanobodies are a class of antigen‐binding protein derived from camelids that achieve comparable binding affinities and specificities to classical antibodies, despite comprising only a single 15 kDa variable domain. Their reduced size makes them an exciting target molecule with which we can explore the molecular code that underpins binding specificity—how is such high specificity achieved? Here, we use a novel dataset of 90 nonredundant, protein‐binding nanobodies with antigen‐bound crystal structures to address this question. To provide a baseline for comparison we construct an analogous set of classical antibodies, allowing us to probe how nanobodies achieve high specificity binding with a dramatically reduced sequence space. Our analysis reveals that nanobodies do not diversify their framework region to compensate for the loss of the VL domain. In addition to the previously reported increase in H3 loop length, we find that nanobodies create diversity by drawing their paratope regions from a significantly larger set of aligned sequence positions, and by exhibiting greater structural variation in their H1 and H2 loops.

Exploiting sequence and stability information for directing nanobody stability engineering

BACKGROUND

Variable domains of camelid heavy-chain antibodies, commonly named nanobodies, have high biotechnological potential. In view of their broad range of applications in research, diagnostics and therapy, engineering their stability is of particular interest. One important aspect is the improvement of thermostability, because it can have immediate effects on conformational stability, protease resistance and aggregation propensity of the protein.

METHODS

We analyzed the sequences and thermostabilities of 78 purified nanobody binders. From this data, potentially stabilizing amino acid variations were identified and studied experimentally.

RESULTS

Some mutations improved the stability of nanobodies by up to 6.1°C, with an average of 2.3°C across eight modified nanobodies. The stabilizing mechanism involves an improvement of both conformational stability and aggregation behavior, explaining the variable degree of stabilization in individual molecules. In some instances, variations predicted to be stabilizing actually led to thermal destabilization of the proteins. The reasons for this contradiction between prediction and experiment were investigated.

CONCLUSIONS

The results reveal a mutational strategy to improve the biophysical behavior of nanobody binders and indicate a species-specificity of nanobody architecture.

GENERAL SIGNIFICANCE

This study illustrates the potential and limitations of engineering nanobody thermostability by merging sequence information with stability data, an aspect that is becoming increasingly important with the recent development of high-throughput biophysical methods.

Analysis of the binding loops configuration and surface adaptation of different crystallized single-domain antibodies in response to various antigens

Monoclonal antibodies have revolutionized the biomedical field through their ubiquitous utilization in different diagnostics and therapeutic applications. Despite this widespread use, their large size and structural complexity have limited their versatility in specific applications. The antibody variable region that is responsible for binding antigen is embodied within domains that can be rescued individually as single-domain antibody (sdAb) fragments. Because of the unique characteristics of sdAbs, such as low molecular weight, high physicochemical stability, and the ability to bind antigens inaccessible to conventional antibodies, they represent a viable alternative to full-length antibodies. Consequently, 149 crystal structures of sdAbs, originating from human (VH), camelids (VHH), or sharks (VNAR), were retrieved from the Protein Data Bank, and their structures were compared. The 3 types of sdAbs displayed complementarity determining regions (CDRs) with different lengths and configurations. CDR3 of the VHH and VNAR domains were dominated by pleated and extended orientations, respectively. Although VNAR showed the smallest average molecular weight and molecular surface area compared with VHH and VH antibodies. However, the solvent accessible surface area measurements of the 3 tested sdAbs types were very similar. All the antihapten VHH antibodies showed pleated CDR3, which were sufficient to create a binding pocket to accommodate haptens (methotrexate and azo dyes) in terms of shape and electrostatic potential. The sdAbs that recognized lysozyme showed more diversity in their CDR3 orientation to enable them to recognize various topographies of lysozyme. Subsequently, the three sdAb classes were different in size and surface area and have shown distinguishable ability to optimize their CDR length and orientation to recognize different antigen classes.

Antibody modeling using the prediction of immunoglobulin structure (PIGS) web server [corrected]

Antibodies (or immunoglobulins) are crucial for defending organisms from pathogens, but they are also key players in many medical, diagnostic and biotechnological applications. The ability to predict their structure and the specific residues involved in antigen recognition has several useful applications in all of these areas. Over the years, we have developed or collaborated in developing a strategy that enables researchers to predict the 3D structure of antibodies with a very satisfactory accuracy. The strategy is completely automated and extremely fast, requiring only a few minutes (∼10 min on average) to build a structural model of an antibody. It is based on the concept of canonical structures of antibody loops and on our understanding of the way light and heavy chains pack together.

A novel VHH antibody targeting the B cell-activating factor for B-cell lymphoma

Objective: To construct an immune alpaca phage display library, in order to obtain a single domain anti-BAFF (B cell-activating factor) antibody. Methods: Using phage display technology, we constructed an immune alpaca phage display library, selected anti-BAFF single domain antibodies (sdAbs), cloned three anti-BAFF single-domain antibody genes into expression vector pSJF2, and expressed them efficiently in Escherichia coli. The affinity of different anti-BAFF sdAbs were measured by Bio layer interferometry. The in vitro biological function of three sdAbs was investigated by cell counting kit-8 (CCK-8) assay and a competitive enzyme-linked immunosorbent assay (ELISA). Results: We obtained three anti-BAFF single domain antibodies (anti-BAFF64, anti-BAFF52 and anti-BAFFG3), which were produced in high yield in Escherichia coli and inhibited tumor cell proliferation in vitro. Conclusion: The selected anti-BAFF antibodies could be candidates for B-cell lymphoma therapies.

Single-domain antibodies targeting neuraminidase protect against an H5N1 influenza virus challenge

Influenza virus neuraminidase (NA) is an interesting target of small-molecule antiviral drugs. We isolated a set of H5N1 NA-specific single-domain antibodies (N1-VHHm) and evaluated their in vitro and in vivo antiviral potential. Two of them inhibited the NA activity and in vitro replication of clade 1 and 2 H5N1 viruses. We then generated bivalent derivatives of N1-VHHm by two methods. First, we made N1-VHHb by genetically joining two N1-VHHm moieties with a flexible linker. Second, bivalent N1-VHH-Fc proteins were obtained by genetic fusion of the N1-VHHm moiety with the crystallizable region of mouse IgG2a (Fc). The in vitro antiviral potency against H5N1 of both bivalent N1-VHHb formats was 30- to 240-fold higher than that of their monovalent counterparts, with 50% inhibitory concentrations in the low nanomolar range. Moreover, single-dose prophylactic treatment with bivalent N1-VHHb or N1-VHH-Fc protected BALB/c mice against a lethal challenge with H5N1 virus, including an oseltamivir-resistant H5N1 variant. Surprisingly, an N1-VHH-Fc fusion without in vitro NA-inhibitory or antiviral activity also protected mice against an H5N1 challenge. Virus escape selection experiments indicated that one amino acid residue close to the catalytic site is required for N1-VHHm binding. We conclude that single-domain antibodies directed against influenza virus NA protect against H5N1 virus infection, and when engineered with a conventional Fc domain, they can do so in the absence of detectable NA-inhibitory activity.

IMPORTANCE

Highly pathogenic H5N1 viruses are a zoonotic threat. Outbreaks of avian influenza caused by these viruses occur in many parts of the world and are associated with tremendous economic loss, and these viruses can cause very severe disease in humans. In such cases, small-molecule inhibitors of the viral NA are among the few treatment options for patients. However, treatment with such drugs often results in the emergence of resistant viruses. Here we show that single-domain antibody fragments that are specific for NA can bind and inhibit H5N1 viruses in vitro and can protect laboratory mice against a challenge with an H5N1 virus, including an oseltamivir-resistant virus. In addition, plant-produced VHH fused to a conventional Fc domain can protect in vivo even in the absence of NA-inhibitory activity. Thus, NA of influenza virus can be effectively targeted by single-domain antibody fragments, which are amenable to further engineering.

SAXS analysis of the tRNA-modifying enzyme complex MnmE/MnmG reveals a novel interaction mode and GTP-induced oligomerization

Transfer ribonucleic acid (tRNA) modifications, especially at the wobble position, are crucial for proper and efficient protein translation. MnmE and MnmG form a protein complex that is implicated in the carboxymethylaminomethyl modification of wobble uridine (cmnm(5)U34) of certain tRNAs. MnmE is a G protein activated by dimerization (GAD), and active guanosine-5'-triphosphate (GTP) hydrolysis is required for the tRNA modification to occur. Although crystal structures of MnmE and MnmG are available, the structure of the MnmE/MnmG complex (MnmEG) and the nature of the nucleotide-induced conformational changes and their relevance for the tRNA modification reaction remain unknown. In this study, we mainly used small-angle X-ray scattering to characterize these conformational changes in solution and to unravel the mode of interaction between MnmE, MnmG and tRNA. In the nucleotide-free state MnmE and MnmG form an unanticipated asymmetric α2β2 complex. Unexpectedly, GTP binding promotes further oligomerization of the MnmEG complex leading to an α4β2 complex. The transition from the α2β2 to the α4β2 complex is fast, reversible and coupled to GTP binding and hydrolysis. We propose a model in which the nucleotide-induced changes in conformation and oligomerization of MnmEG form an integral part of the tRNA modification reaction cycle.

Novel therapy based on camelid nanobodies

Nanobodies (Nbs) are small antibody fragments derived from camelid heavy chain antibodies through recombinant gene technology. Their exceptional physicochemical properties, possibility of humanization and unique antigen recognition properties make them excellent candidates for targeted delivery of biologically active components. Several different therapeutic approaches based on the novel camelid Nbs have been developed to treat a wide range of diseases ranging from immune, bone, blood and neurological disorders; infectious diseases and cancer. This review provides a comprehensive overview of the current state of the use of camelid-derived Nbs as novel therapeutic agents against multiple diseases.

Nanobodies: natural single-domain antibodies

Sera of camelids contain both conventional heterotetrameric antibodies and unique functional heavy (H)-chain antibodies (HCAbs). The H chain of these homodimeric antibodies consists of one antigen-binding domain, the VHH, and two constant domains. HCAbs fail to incorporate light (L) chains owing to the deletion of the first constant domain and a reshaped surface at the VHH side, which normally associates with L chains in conventional antibodies. The genetic elements composing HCAbs have been identified, but the in vivo generation of these antibodies from their dedicated genes into antigen-specific and affinity-matured bona fide antibodies remains largely underinvestigated. However, the facile identification of antigen-specific VHHs and their beneficial biochemical and economic properties (size, affinity, specificity, stability, production cost) supported by multiple crystal structures have encouraged antibody engineering of these single-domain antibodies for use as a research tool and in biotechnology and medicine.

Tilting the balance between canonical and noncanonical conformations for the H1 hypervariable loop of a llama VHH through point mutations

Nanobodies are single-domain antibodies found in camelids. These are the smallest naturally occurring binding domains and derive functionality via three hypervariable loops (H1-H3) that form the binding surface. They are excellent candidates for antibody engineering because of their favorable characteristics like small size, high solubility, and stability. To rationally engineer antibodies with affinity for a specific target, the hypervariable loops can be tailored to obtain the desired binding surface. As a first step toward such a goal, we consider the design of loops with a desired conformation. In this study, we focus on the H1 loop of the anti-hCG llama nanobody that exhibits a noncanonical conformation. We aim to "tilt" the stability of the H1 loop structure from a noncanonical conformation to a (humanized) type 1 canonical conformation by studying the effect of selected mutations to the amino acid sequence of the H1, H2, and proximal residues. We use all-atomistic, explicit-solvent, biased molecular dynamic simulations to simulate the wild-type and mutant loops in a prefolded framework. We thus find mutants with increasing propensity to form a stable type 1 canonical conformation of the H1 loop. Free energy landscapes reveal the existence of conformational isomers of the canonical conformation that may play a role in binding different antigenic surfaces. We also elucidate the approximate mechanism and kinetics of transitions between such conformational isomers by using a Markovian model. We find that a particular three-point mutant has the strongest thermodynamic propensity to form the H1 type 1 canonical structure but also to exhibit transitions between conformational isomers, while a different, more rigid three-point mutant has the strongest propensity to be kinetically trapped in such a canonical structure.

Introduction to heavy chain antibodies and derived Nanobodies

The immune response of infected or immunized dromedaries contains a diverse repertoire of conventional and heavy chain-only antibodies, both functional in antigen binding. By definition, a heavy chain antibody is devoid of a light chain and in the case of the heavy chain antibodies in camelids the CH1 domain is also missing. Consequently a camelid heavy chain antibody associates with its cognate antigen via a single domain, the variable heavy chain domain of a heavy chain antibody or VHH. An antigen-specific VHH, also known as Nanobody, with excellent biochemical properties can be obtained in various ways. Their recombinant expression provides access to user-friendly tools for a wide variety of applications.

Dual beneficial effect of interloop disulfide bond for single domain antibody fragments

The antigen-binding fragment of functional heavy chain antibodies (HCAbs) in camelids comprises a single domain, named the variable domain of heavy chain of HCAbs (VHH). The VHH harbors remarkable amino acid substitutions in the framework region-2 to generate an antigen-binding domain that functions in the absence of a light chain partner. The substitutions provide a more hydrophilic, hence more soluble, character to the VHH but decrease the intrinsic stability of the domain. Here we investigate the functional role of an additional hallmark of dromedary VHHs, i.e. the extra disulfide bond between the first and third antigen-binding loops. After substituting the cysteines forming this interloop cystine by all 20 amino acids, we selected and characterized several VHHs that retain antigen binding capacity. Although VHH domains can function in the absence of an interloop disulfide bond, we demonstrate that its presence constitutes a net advantage. First, the disulfide bond stabilizes the domain and counteracts the destabilization by the framework region-2 hallmark amino acids. Second, the disulfide bond rigidifies the long third antigen-binding loop, leading to a stronger antigen interaction. This dual beneficial effect explains the in vivo antibody maturation process favoring VHH domains with an interloop disulfide bond.

Affinity transfer to a human protein by CDR3 grafting of camelid VHH

VHH is the binding domain of the IgG heavy chain. Some VHHs have an extremely long CDR3 that contributes to antigen binding. We studied the antigen binding ability of CDR3 by grafting a CDR3 from an antigen-binding VHH onto a nonbinding VHH. cAb-CA05-(1RI8), the CDR3-grafted VHH, had an antigen-binding ability. To find a human scaffold protein acceptable for VHH CDR3 grafting, we focused on the conserved structure of VHH, especially the N-terminal and C-terminal amino acid residues of the CDR3 loop and the Cys residue of CDR1. Human origin protein structures with the same orientation were searched in PDB and ubiquitin was selected. Ubi-(1RI8), the CDR3-grafted ubiquitin, had antigen-binding ability, though the affinity was relatively low compared to cAb-CA05-(1RI8). The thermodynamic parameters of Ubi-(1RI8) binding to HEWL were different from cAb-CA05-(1RI8). Hydrogen-deuterium exchange experiments showed decreased stability around the CDR3 grafting region of Ubi-(1RI8), which might explain the decreased antigen-binding ability and the differences in thermodynamic properties. We concluded that the orientation of the CDR3 sequence of Ubi-(1RI8) could not be reconstructed correctly.

Analysis and modeling of the variable region of camelid single-domain antibodies

Camelids have a special type of Ab, known as heavy chain Abs, which are devoid of classical Ab light chains. Relative to classical Abs, camelid heavy chain Abs (cAbs) have comparable immunogenicity, Ag recognition diversity and binding affinities, higher stability and solubility, and better manufacturability, making them promising candidates for alternate therapeutic scaffolds. Rational engineering of cAbs to improve therapeutic function requires knowledge of the differences of sequence and structural features between cAbs and classical Abs. In this study, amino acid sequences of 27 cAb variable regions (V(H)H) were aligned with the respective regions of 54 classical Abs to detect amino acid differences, enabling automatic identification of cAb V(H)H CDRs. CDR analysis revealed that the H1 often (and sometimes the H2) adopts diverse conformations not classifiable by established canonical rules. Also, although the cAb H3 is much longer than classical H3 loops, it often contains common structural motifs and sometimes a disulfide bond to the H1. Leveraging these observations, we created a Monte Carlo-based cAb V(H)H structural modeling tool, where the CDR H1 and H2 loops exhibited a median root-mean-square deviation to natives of 3.1 and 1.5 Å, respectively. The protocol generated 8-12, 14-16, and 16-24 residue H3 loops with a median root-mean-square deviation to natives of 5.7, 4.5, and 6.8 Å, respectively. The large deviation of the predicted loops underscores the challenge in modeling such long loops. cAb V(H)H homology models can provide structural insights into interaction mechanisms to enable development of novel Abs for therapeutic and biotechnological use.

Nanobody; an old concept and new vehicle for immunotargeting

The use of antibodies in cancer therapy has come a long way since the day Paul Ehrlich described the concept and Kohler and Milstein devised the hybridoma technology to bring this theory to reality. The synthesis of murine monoclonal antibodies (mAbs) was the first success in this field, leading to the invention of chimerization, the production of variable fragments (Fv) with the progression to domain antibodies (dAb) and later humanization technologies to maximize the clinical utility of murine mAbs. It was just by chance that dAbs were found to exist in ?heavy chain? immunoglobulins from Camelidae family and cartilaginous fish. These unique antibody fragments interact with antigen by virtue of only one single variable domain, referred to as VHH or nanobody. Several characteristics make nanobody use superior to the abovementioned antibodies. They are non-immunogenic and show high thermal and chemical stability. There are several reports of raising specific nanobodies against enzymes, haptens, pathogens, toxins and tumor markers, which are outlined in this paper. All these characteristics make them strong candidates as targeting agents for cancer therapy.

A novel promiscuous class of camelid single-domain antibody contributes to the antigen-binding repertoire

It is well established that, in addition to conventional Abs, camelids (such as Camelus dromedarius and Lama glama) possess unique homodimeric H chain Abs (HCAbs) devoid of L chains. The Ag-binding site of these HCAbs consists of a single variable domain, referred to as VHH. It is widely accepted that these VHHs, with distinct framework-2 imprints evolved within the V(H) clan III-family 3, are exclusively present on HCAbs. In this study, we report the finding of a distinct leader signal sequence linked to variable genes displaying a high degree of homology to the clan II, human VH(4) family that contributes to the HCAb Ag-binding diversity. Although the VHH framework-2 imprints are clearly absent, their VH(4)-D-JH recombination products can be rearranged to the H chains of both classical and HCAbs. This suggests that for these V domains the presence of a L chain to constitute the Ag-binding site is entirely optional. As such, the capacity of this promiscuous VH(4) family to participate in two distinct Ab formats significantly contributes to the breadth of the camelid Ag-binding repertoire. This was illustrated by the isolation of stable, dendritic cell-specific VH(4) single domains from a VH(4)-HCAb phage display library. The high degree of homology with human VH(4) sequences is promising in that it may circumvent the need for "humanization" of such single-domain Abs in therapeutic applications.

Rapid structural characterization of human antibody-antigen complexes through experimentally validated computational docking

If we understand the structural rules governing antibody (Ab)-antigen (Ag) interactions in a given virus, then we have the molecular basis to attempt to design and synthesize new epitopes to be used as vaccines or optimize the antibodies themselves for passive immunization. Comparing the binding of several different antibodies to related Ags should also further our understanding of general principles of recognition. To obtain and compare the three-dimensional structure of a large number of different complexes, however, we need a faster method than traditional experimental techniques. While biocomputational docking is fast, its results might not be accurate. Combining experimental validation with computational prediction may be a solution. As a proof of concept, here we isolated a monoclonal Ab from the blood of a human donor recovered from dengue virus infection, characterized its immunological properties, and identified its epitope on domain III of dengue virus E protein through simple and rapid NMR chemical shift mapping experiments. We then obtained the three-dimensional structure of the Ab/Ag complex by computational docking, using the NMR data to drive and validate the results. In an attempt to represent the multiple conformations available to flexible Ab loops, we docked several different starting models and present the result as an ensemble of models equally agreeing with the experimental data. The Ab was shown to bind a region accessible only in part on the viral surface, explaining why it cannot effectively neutralize the virus.

Effector functions of camelid heavy-chain antibodies in immunity to West Nile virus

Three classes of IgG have been described for camelids. IgG1 has a conventional four-chain structure, while IgG2 and IgG3 do not incorporate light chains. The structures and antigen-binding affinities of the so-called heavy-chain classes have been studied in detail; however, their regulation and effector functions are largely undefined. The aim of this study was to examine the participation of conventional and heavy-chain IgG antibodies in the camelid immune defense directed against West Nile virus (WNV). We found that natural infection or vaccination with killed WNV induced IgG1 and IgG3. Vaccination also induced IgG1 and IgG3; IgG2 was produced during the anamnestic response to vaccination. When purified IgGs were tested in plaque-reduction neutralization titer (PRNT) tests, IgG3 demonstrated PRNT activities comparable to those of conventional IgG1. In contrast, IgG2 demonstrated only suboptimal activity at the highest concentrations tested. Flow cytometric analysis revealed that macrophages bound IgG1, IgG2, and IgG3. Furthermore, subneutralizing concentrations of all three isotypes enhanced WNV infection of cultured macrophages. Our results document distinctions in regulation and function between camelid heavy-chain isotypes. The reduced size and distinct structure of IgG3 did not negatively impact its capacity to neutralize virus. In contrast, IgG2 appeared to be less efficient in neutralization. This information advances our understanding of these unusual antibodies in ways that can be applied in the development of effective vaccines for camelids.

Simulated mutagenesis of the hypervariable loops of a llama VHH domain for the recovery of canonical conformations

In this work, wildtype and mutated hypervariable regions of an anti-hCG llama VHH antibody were simulated via a molecular dynamics replica exchange method (REM). Seven mutants were simulated with the goal of identifying structural determinants that return the noncanonical H1 loop of the wildtype antibody to the type 1 canonical structure predicted by database methods formulated for conventional antibodies. Two cases with three point mutations yielded a stable type 1 H1 structure. In addition, other mutants with fewer mutations showed evidence of such conformations. Overall, the mutagenesis results suggest a marked influence of interloop interactions on the attainment of canonical conformations for this antibody. On the methodological front, a novel REM scheme was developed to quickly screen diverse mutants based on their relative propensities for attaining favorable structures. This multimutant REM (MMREM) was used to successfully identify mutations that stabilize a canonical H1 loop grafted on the llama antibody scaffold. The use of MMREM and REM for screening mutants and assessing structural stability may be useful in the rational design of antibody hypervariable loops.

Toward high-resolution homology modeling of antibody Fv regions and application to antibody-antigen docking

High-resolution homology models are useful in structure-based protein engineering applications, especially when a crystallographic structure is unavailable. Here, we report the development and implementation of RosettaAntibody, a protocol for homology modeling of antibody variable regions. The protocol combines comparative modeling of canonical complementarity determining region (CDR) loop conformations and de novo loop modeling of CDR H3 conformation with simultaneous optimization of V(L)-V(H) rigid-body orientation and CDR backbone and side-chain conformations. The protocol was tested on a benchmark of 54 antibody crystal structures. The median root mean square deviation (rmsd) of the antigen binding pocket comprised of all the CDR residues was 1.5 A with 80% of the targets having an rmsd lower than 2.0 A. The median backbone heavy atom global rmsd of the CDR H3 loop prediction was 1.6, 1.9, 2.4, 3.1, and 6.0 A for very short (4-6 residues), short (7-9), medium (10-11), long (12-14) and very long (17-22) loops, respectively. When the set of ten top-scoring antibody homology models are used in local ensemble docking to antigen, a moderate-to-high accuracy docking prediction was achieved in seven of fifteen targets. This success in computational docking with high-resolution homology models is encouraging, but challenges still remain in modeling antibody structures for sequences with long H3 loops. This first large-scale antibody-antigen docking study using homology models reveals the level of "functional accuracy" of these structural models toward protein engineering applications.

Nanobody-aided structure determination of the EpsI:EpsJ pseudopilin heterodimer from Vibrio vulnificus

Pseudopilins form the central pseudopilus of the sophisticated bacterial type 2 secretion systems. The crystallization of the EpsI:EpsJ pseudopilin heterodimer from Vibrio vulnificus was greatly accelerated by the use of nanobodies, which are the smallest antigen-binding fragments derived from heavy-chain only camelid antibodies. Seven anti-EpsI:EpsJ nanobodies were generated and co-crystallization of EpsI:EpsJ nanobody complexes yielded several crystal forms very rapidly. In the structure solved, the nanobodies are arranged in planes throughout the crystal lattice, linking layers of EpsI:EpsJ heterodimers. The EpsI:EpsJ dimer observed confirms a right-handed architecture of the pseudopilus, but, compared to a previous structure of the EpsI:EpsJ heterodimer, EpsI differs 6 degrees in orientation with respect to EpsJ; one loop of EpsJ is shifted by approximately 5A due to interactions with the nanobody; and a second loop of EpsJ underwent a major change of 17A without contacts with the nanobody. Clearly, nanobodies accelerate dramatically the crystallization of recalcitrant protein complexes and can reveal conformational flexibility not observed before.

Camelid immunoglobulins and nanobody technology

It is well established that all camelids have unique antibodies circulating in their blood. Unlike antibodies from other species, these special antibodies are devoid of light chains and are composed of a heavy-chain homodimer. These so-called heavy-chain antibodies (HCAbs) are expressed after a V-D-J rearrangement and require dedicated constant gamma-genes. An immune response is raised in these so-called heavy-chain antibodies following classical immunization protocols. These HCAbs are easily purified from serum, and the antigen-binding fragment interacts with parts of the target that are less antigenic to conventional antibodies. Since the antigen-binding site of the dromedary HCAb is comprised in one single domain, referred to as variable domain of heavy chain of HCAb (VHH) or nanobody (Nb), we designed a strategy to clone the Nb repertoire of an immunized dromedary and to select the Nbs with specificity for our target antigens. The monoclonal Nbs are well produced in bacteria, are very stable and highly soluble, and bind their cognate antigen with high affinity and specificity. We have successfully developed recombinant Nbs for research purposes, as probe in biosensors, to diagnose infections, and to treat diseases like cancer or trypanosomosis.

Toward chaperone-assisted crystallography: protein engineering enhancement of crystal packing and X-ray phasing capabilities of a camelid single-domain antibody (VHH) scaffold

A crystallization chaperone is an auxiliary protein that binds to a target of interest, enhances and modulates crystal packing, and provides high-quality phasing information. We critically evaluated the effectiveness of a camelid single-domain antibody (V(H)H) as a crystallization chaperone. By using a yeast surface display system for V(H)H, we successfully introduced additional Met residues in the core of the V(H)H scaffold. We identified a set of SeMet-labeled V(H)H variants that collectively produced six new crystal forms as the complex with the model antigen, RNase A. The crystals exhibited monoclinic, orthorhombic, triclinic, and tetragonal symmetry and have one or two complexes in the asymmetric unit, some of which diffracted to an atomic resolution. The phasing power of the Met-enriched V(H)H chaperone allowed for auto-building the entire complex using single-anomalous dispersion technique (SAD) without the need for introducing SeMet into the target protein. We show that phases produced by combining SAD and V(H)H model-based phases are accurate enough to easily solve structures of the size reported here, eliminating the need to collect multiple wavelength multiple-anomalous dispersion (MAD) data. Together with the presence of high-throughput selection systems (e.g., phage display libraries) for V(H)H, the enhanced V(H)H domain described here will be an excellent scaffold for producing effective crystallization chaperones.

Epitope mapping and structural analysis of an anti‐ErbB2 antibody A21: Molecular basis for tumor inhibitory mechanism

Anti-ErbB2 antibodies targeting distinct epitopes can have different biological functions on cancer cells. A21 prepared by surface epitope masking (SEM) method is a tumor-inhibitory anti-ErbB2 monoclonal antibody. Previously we engineered a single chain chimeric antibody chA21 with potential for therapy of ErbB2-overexpressing tumors. Here, we mapped the A21 epitope on ErbB2 extracellular domain (ECD) by screening a combinatorial phage display peptide library, serial subdomain deletion, and mutagenesis scanning. X-ray crystal structure of the A21 scFv fragment at 2.1 A resolution was also determined. A molecular model of Ag-Ab complex was then constructed based on the crystal structures of the A21 scFv and ErbB2 ECD. Some of biological functions of the A21 mAb and its derivative antibodies including their tumor cell growth inhibition and effects on the expression, internalization, and phosphorylation of ErbB2 receptor were also investigated. The results showed that A21 recognized a conformational epitope comprising a large region mostly from ErbB2 extracellular subdomain I with several surface-exposed residues important for the binding affinity. These data provide unique functional properties of A21 that are quite different from two broadly used anti-ErbB2 mAbs, Herceptin and 2C4. It suggested that the A21 epitope may be another valuable target for designing new anti-ErbB2 therapeutics.

Alpaca (Lama pacos) as a convenient source of recombinant camelid heavy chain antibodies (VHHs)

Recombinant single domain antibody fragments (VHHs) that derive from the unusual camelid heavy chain only IgG class (HCAbs) have many favourable properties compared with single-chain antibodies prepared from conventional IgG. As a result, VHHs have become widely used as binding reagents and are beginning to show potential as therapeutic agents. To date, the source of VHH genetic material has been camels and llamas despite their large size and limited availability. Here we demonstrate that the smaller, more tractable and widely available alpaca is an excellent source of VHH coding DNA. Alpaca sera IgG consists of about 50% HCAbs, mostly of the short-hinge variety. Sequencing of DNA encoding more than 50 random VHH and hinge domains permitted the design of PCR primers that will amplify virtually all alpaca VHH coding DNAs for phage display library construction. Alpacas were immunized with ovine tumour necrosis factor alpha (TNFalpha) and a VHH phage display library was prepared from a lymph node that drains the sites of immunizations and successfully employed in the isolation of VHHs that bind and neutralize ovine TNFalpha.

Nanobodies as novel agents for cancer therapy

Nanobodies are the smallest fragments of naturally occurring heavy-chain antibodies that have evolved to be fully functional in the absence of a light chain. As such, the cloning and selection of antigen-specific nanobodies obviate the need for construction and screening of large libraries, and for lengthy and unpredictable in vitro affinity maturation steps. The unique and well-characterised properties enable nanobodies to excel conventional therapeutic antibodies in terms of recognising uncommon or hidden epitopes, binding into cavities or active sites of protein targets, tailoring of half-life, drug format flexibility, low immunogenic potential and ease of manufacture. Moreover, the favourable biophysical and pharmacological properties of nanobodies, together with the ease of formatting them into multifunctional protein therapeutics, leaves them ideally placed as a new generation of antibody-based therapeutics. This review describes the state of the art on nanobodies and illustrates their potential as cancer therapeutic agents.

Molecular basis for the preferential cleft recognition by dromedary heavy-chain antibodies

Clefts on protein surfaces are avoided by antigen-combining sites of conventional antibodies, in contrast to heavy-chain antibodies (HCAbs) of camelids that seem to be attracted by enzymes' substrate pockets. The explanation for this pronounced preference of HCAbs was investigated. Eight single domain antigen-binding fragments of HCAbs (VHH) with nanomolar affinities for lysozyme were isolated from three immunized dromedaries. Six of eight VHHs compete with small lysozyme inhibitors. This ratio of active site binders is also found within the VHH pool derived from polyclonal HCAbs purified from the serum of the immunized dromedary. The crystal structures of six VHHs in complex with lysozyme and their interaction surfaces were compared to those of conventional antibodies with the same antigen. The interface sizes of VHH and conventional antibodies to lysozyme are very similar as well as the number and chemical nature of the contacts. The main difference comes from the compact prolate shape of VHH that presents a large convex paratope, predominantly formed by the H3 loop and interacting, although with different structures, into the concave lysozyme substrate-binding pocket. Therefore, a single domain antigen-combining site has a clear structural advantage over a conventional dimeric format for targeting clefts on antigenic surfaces.

Prokaryotic expression of antibodies

Maximizing the expression yields of recombinant whole antibodies and antibody fragments such as Fabs, single-chain Fvs and single-domain antibodies is highly desirable since it leads to lower production costs. Various eukaryotic and prokaryotic expression systems have been exploited to accommodate antibody expression but Escherichia coli systems have enjoyed popularity, in particular with respect to antibody fragments, because of their low cost and convenience. In many instances, product yields have been less than adequate and intrinsic and extrinsic variables have been investigated in an effort to improve yields. This review deals with various aspects of antibody expression in E. coli with a particular focus on single-domain antibodies.