3D micro-computed tomography of trabecular and cortical bone architecture with application to a rat model of immobilisation osteoporosis

Intra-articular delivery of micronized dehydrated human amnion/chorion membrane reduces degenerative changes after onset of post-traumatic osteoarthritis

Background: Micronized dehydrated human amnion/chorion membrane (mdHACM) has reduced short term post-traumatic osteoarthritis (PTOA) progression in rats when delivered 24 h after medial meniscal transection (MMT) and is being investigated for clinical use as a disease modifying therapy. Much remains to be assessed, including its potential for longer-term therapeutic benefit and treatment effects after onset of joint degeneration. Objectives: Characterize longer-term effects of acute treatment with mdHACM and determine whether treatment administered to joints with established PTOA could slow or reverse degeneration. Hypotheses: Acute treatment effects will be sustained for 6 weeks, and delivery of mdHACM after onset of joint degeneration will attenuate structural osteoarthritic changes. Methods: Rats underwent MMT or sham surgery (left leg). mdHACM was delivered intra-articularly 24 h or 3 weeks post-surgery (n = 5-7 per group). Six weeks post-surgery, animals were euthanized and left tibiae scanned using equilibrium partitioning of an ionic contrast agent microcomputed tomography (EPIC-µCT) to structurally quantify joint degeneration. Histology was performed to examine tibial plateau cartilage. Results: Quantitative 3D µCT showed that cartilage structural metrics (thickness, X-ray attenuation, surface roughness, exposed bone area) for delayed mdHACM treatment limbs were significantly improved over saline treatment and not significantly different from shams. Subchondral bone mineral density and thickness for the delayed treatment group were significantly improved over acute treated, and subchondral bone thickness was not significantly different from sham. Marginal osteophyte degenerative changes were decreased with delayed mdHACM treatment compared to saline. Acute treatment (24 h post-surgery) did not reduce longer-term joint tissue degeneration compared to saline. Histology supported µCT findings and further revealed that while delayed treatment reduced cartilage damage, chondrocytes displayed qualitatively different morphologies and density compared to sham. Conclusion: This study provides insight into effects of intra-articular delivery timing relative to PTOA progression and the duration of therapeutic benefit of mdHACM. Results suggest that mdHACM injection into already osteoarthritic joints can improve joint health, but a single, acute mdHACM injection post-injury does not prevent long term osteoarthritis associated with meniscal instability. Further work is needed to fully characterize the durability of therapeutic benefit in stable osteoarthritic joints and the effects of repeated injections.

Medial tibial plateau sustaining higher physiological stress than the lateral plateau: based on 3D printing and finite element method

Background

Medial compartment knee osteoarthritis (KOA) accounts for most KOA cases, and increased trabecular bone volume fraction (BV/TV) is one of the pathological changes in the tibial plateau of KOA. How BV/TV changes before and after the menopause and its effects on medial compartment KOA are yet to be clarified.

Methods

Twenty femurs from twenty 12-week-old rats were included. The operated group underwent ovariectomy (to represent the osteoporosis condition), called the O group, and the non-operated group was the normal control, called the N group. Micro-CT scans of the femoral condyles were acquired 12 weeks after the surgery, and the volume of interest (VOI) of medial-, inter-, and lateral-condyle trabeculae were three-dimensional (3D) printed for uniaxial compression mechanical test and simulated by the finite element (FE) method.

Results

The results demonstrated that the O group indicated poorer trabecular architecture than the N group in three parts of the femoral condyle, especially in the intercondyle. Within the group, the BV/TV, trabecular thickness (Tb.Th), and trabecular number (Tb.N) ratios between the medial and lateral condyles were greater than 1 in both N and O groups. The medial condyle trabeculae's mechanical properties were higher than those of the lateral condyle, and this superiority appears to be broadened under osteoporotic conditions. FE modelling well reproduced these mechanical differentiations.

Conclusions

According to Wolff's law, the higher BV/TV and mechanical properties of the medial femoral condyle may be due to inherent imbalanced loading on the knee component. Alterations in BV/TV and their corresponding mechanical properties may accompany KOA.

Bone-Targeting Nanoparticles of a Dendritic (Aspartic acid)3-Functionalized PEG-PLGA Biopolymer Encapsulating Simvastatin for the Treatment of Osteoporosis in Rat Models

Simvastatin (SIM) is a lipid-lowering drug that also promotes bone formation, but its high liver specificity may cause muscle damage, and the low solubility of lipophilic drugs limits the systemic administration of SIM, especially in osteoporosis (OP) studies. In this study, we utilized the bone-targeting moiety of dendritic oligopeptides consisting of three aspartic acid moieties (_dAsp₃) and amphiphilic polymers (poly(ethylene glycol)-block-poly(lactic-co-glycolic acid); PEG-PLGA) to create _dAsp₃-PEG-PLGA (APP) nanoparticles (NPs), which can carry SIM to treat OP. An in vivo imaging system showed that gold nanocluster (GNC)-PLGA/APP NPs had a significantly higher accumulation rate in representative bone tissues. In vivo experiments comparing low-dose SIM treatment (0.25 mg/kg per time, 2 times per week) showed that bone-targeting SIM/APP NPs could increase the bone formation effect compared with non-bone-targeting SIM/PP NPs in a local bone loss of hindlimb suspension (disuse) model, but did not demonstrate good bone formation in a postmenopausal (ovariectomized) model of systemic bone loss. The APP NPs could effectively target high mineral levels in bone tissue and were expected to reduce side effects in other organs affected by SIM. However, in vivo OP model testing showed that the same lower dose could not be used to treat different types of OP.

Antiosteoporosis effect of tanshinol in osteoporosis animal models: A systematic review and meta-analysis

Background: Osteoporosis (OP) is an age-related bone disease that has emerged as a worldwide public health concern due to its increasing incidence and high disability rate. Tanshinol [D (+) β-3,4-dihydroxyphenyl lactic acid, TS], a water-soluble component extracted from Salvia miltiorrhiza, has proven to be effective in attenuating OP in vitro and in vivo. However, there is insufficient evidence to support its clinical application.

Objective: This meta-analysis aimed to investigate available OP animal model studies to demonstrate the antiosteoporosis effects of TS in a systematic manner.

Methods: Electronic searches of related studies were conducted in the following databases: EMBASE, PubMed, Web of Science, Cochrane Library, Chinese National Knowledge Infrastructure, Chinese VIP Database, Chinese Biomedical Literature Database, and Wanfang. The retrieval date was January 2022, and there were no time or language restrictions. The CAMARADES 10-item quality checklist was utilized to test the risk of potential bias for each study, and modifications were performed accordingly. The primary outcome was bone mineral density (BMD, which included the femur and lumbar spine); and secondary outcomes were parameters for trabecular bone such as bone volume over total volume (BV/TV), trabecular number (Tb.N), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), conditions of the femur (including bone maximum load and bone elastic load), and markers of bone metabolism (serum osteocalcin, S-OCN).

Results: A total of nine studies including 176 rats were chosen for this analysis. Egger’s test revealed the presence of publication bias in various studies regarding the primary outcome. According to this systematic review, TS significantly increased the BMD of the femur (BMD-femur) (SMD = 4.40; 95% CI = 1.61 to 7.19; p = 0.002, I² = 94.6%), BMD of the lumbar spine (BMD-lumbar) (SMD = 6.390; 95% CI = 2.036 to 10.744; p = 0.004, I² = 95.9%), BV/TV (SMD = 0.790; 95% CI = 0.376 to 1.204; p = 0.000, I² = 10.8), Tb.N (SMD = 0.690; 95% CI = 0.309 to 1.071; p = 0.000, I² = 12%), Tb.Th (SMD = 0.772; 95% CI = 0.410 to 1.134; p = 0.000, I² = 32.2%), and S-OCN (SMD = 3.13; 95% CI = 0.617 to 5.65; p = 0.015, I² = 92.3%), while the Tb.Sp level was markedly decreased in OP models in comparison to the controls (SMD = −0.822; 95% CI = −1.207 to −0.437; p = 0.000, I² = 0%). Moreover, TS treatment was associated with a significant improvement of the bone biomechanical indicators, including bone maximum load (SMD = 0.912; 95% CI = 0.370 to 1.455; p = 0.001, I² = 40%) and elasticity load (SMD = 0.821; 95% CI = 0.290 to 1.351; p = 0.002, I² = 0%).

Conclusion: Collectively, our findings suggest that TS can improve BMD, bone microarchitecture, bone biomechanics, and S-OCN expression in rats, implying that it could be used clinically in the future.

Systematic Review Registration:https://inplasy.com/inplasy-2022-3-0053/, identifier [INPLASY202230053].

Trabecular bone porosity and pore size distribution in osteoporotic patients - A low field nuclear magnetic resonance and microcomputed tomography investigation

The study of bone morphology is of great importance as bone morphology is influenced by factors such as age and underlying comorbidities and is associated with bone mechanical properties and fracture risk. Standard diagnostic techniques used in bone disease, such as Dual-Energy X-ray absorptiometry and ultrasonography do not provide qualitative and quantitative morphological information. In recent years, techniques such as High Resolution Computed Tomography (HR-CT), micro- CT, Magnetic Resonance Imaging (MRI), and Low Field Nuclear Magnetic Resonance (LF-NMR) have been developed for the study of bone structure and porosity. Data obtained from these techniques have been used to construct models to predict bone mechanical properties thanks to finite element analysis. Cortical porosity has been extensively studied and successfully correlated with disease progression and mechanical properties. Trabecular porosity and pore size distribution, however, have increasingly been taken into consideration to obtain a comprehensive analysis of bone pathology and mechanic. Therefore, we have decided to evaluate the ability of micro- CT (chosen for its high spatial resolving power) and LF-NMR (chosen to analyze the behavior of water molecules within trabecular bone pores) to characterize the morphology of trabecular bone in osteoporosis. Trabecular bone samples from human femoral heads collected during hip replacement surgery were from osteoporosis (test group) and osteoarthritis (control group) patients. Our data show that both micro- CT and LF-NMR can detect qualitative changes in trabecular bone (i.e., transition from plate-like to rod-like morphology). Micro- CT failed to detect significant differences in trabecular bone morphology parameters between osteoporotic and osteoarthritic specimens, with the exception of Trabecular Number and Connectivity Density, which are markers of osteoporosis progression. In contrast, LF-NMR was able to detect significant differences in porosity and pore size of trabecular bone from osteoporotic versus osteoarthritic (control) samples. However, only the combination of these two techniques allowed the detection of structural morphometric changes (increase in the larger pore fraction and enlargement of the larger pores) in the trabecular bone of osteoporotic specimens compared to osteoarthritic ones. In conclusion, the combined use of LF-NMR and micro- CT provides a valuable tool for characterizing the morphology of trabecular bone and may offer the possibility for a new approach to the study and modeling of bone mechanics in the context of aging and disease.

Murine femur micro-computed tomography and biomechanical datasets for an ovariectomy-induced osteoporosis model

The development of new effective and safer therapies for osteoporosis, in addition to improved diagnostic and prevention strategies, represents a serious need in the scientific community. Micro-CT image-based analyses in association with biomechanical testing have become pivotal tools in identifying osteoporosis in animal models by assessment of bone microarchitecture and resistance, as well as bone strength. Here, we describe a dataset of micro-CT scans and reconstructions of 15 whole femurs and biomechanical tests on contralateral femurs from C57BL/6JOlaHsd ovariectomized (OVX), resembling human post-menopausal osteoporosis, and sham operated (sham) female mice. Data provided for each mouse include: the acquisition images (.tiff), the reconstructed images (.bmp) and an.xls file containing the maximum attenuations for each reconstructed image. Biomechanical data include an.xls file with the recorded load-displacement, a movie with the filmed test and an.xls file collecting all biomechanical results.

The impact of autologous concentrated growth factors on the alveolar ridge preservation after posterior tooth extraction: A prospective, randomized controlled clinical trial

BACKGROUND

Alveolar ridge preservation can effectively decrease alveolar ridge resorption following tooth extraction, but it can be limited by reducing new bone formation and residual bone graft material. Efforts to develop more efficacious approaches are thus an area of active research.

PURPOSE

To assess the impact of autologous concentrated growth factors (CGF) on alveolar ridge absorption and osteogenesis following posterior tooth extraction.

MATERIALS AND METHODS

Fifty patients were randomly assigned to have extraction sockets treated with CGF or no treatment. At 10 days, 1 month, and 3 months postextraction, soft tissue color and texture were examined and evaluated with healing score. Cone-beam computed tomography (CBCT) scans were performed before and 3 months after extraction, while radiographic analyses were used to assess vertical and horizontal bone changes. Bone samples were collected from the extraction sockets during implant placement, and micro-computed tomography (micro-CT) scans and histological analysis were performed to evaluate new bone formation. t-Test or Mann-Whitney U test was used to compare data and the level of statistical significance was set at 0.05 for all analyses.

RESULTS

Forty-six patients completed the trial. Sockets in the experimental group exhibited significantly better healing score on Day 10 postextraction relative to the control group, whereas comparable healing was observed in both groups at 1 and 3 months postextraction. Experimental group exhibited reduced vertical bone changes relative to the control (p < 0.05). Significant reductions were observed in ridge width changes at 1 and 2 mm apical to the crest (p < 0.05), although differences at 3 and 5 mm apical to the crest were not significant. Significant differences of bone mineral density (BMD) and microarchitecture of trabecular bone were observed via micro-CT analyses, and the experimental group had better results.

CONCLUSION

CGF application following posterior tooth extraction may reduce vertical and horizontal bone resorption and promote new bone formation.

Integration of mechanics and biology in computer simulation of bone remodeling

Bone remodeling is a complex physiological process that spans across multiple spatial and temporal scales and is regulated by both mechanical and hormonal cues. An imbalance between bone resorption and bone formation in the process of bone remodeling may lead to various bone pathologies. One powerful and non-invasive approach to gain new insights into mechano-adaptive bone remodeling is computer modeling and simulation. Recent findings in bone physiology and advances in computer modeling have provided a unique opportunity to study the integration of mechanics and biology in bone remodeling. Our objective in this review is to critically appraise recent advances and developments and discuss future research opportunities in computational bone remodeling approaches that enable integration of mechanics and cellular and molecular pathways. Based on the critical appraisal of the relevant recent published literature, we conclude that multiscale in silico integration of personalized bone mechanics and mechanobiology combined with data science and analytics techniques offer the potential to deepen our knowledge of bone remodeling and provide ample opportunities for future research.

Quantitative measures of bone shape, cartilage morphometry and joint alignment are associated with disease in an ACLT and MMx rat model of osteoarthritis

Multi-scale, subject-specific quantitative methods to characterize and monitor osteoarthritis in animal models and therapeutic treatments could help reveal causal relationships in disease development and distinguish treatment strategies. In this work, we demonstrate a reproducible and sensitive quantitative image analysis to characterize bone, cartilage and joint measures describing a rat model of post-traumatic osteoarthritis. Eleven 3-month-old male Wistar rats underwent medial anterior cruciate ligament (ACL) transection and medial meniscectomy on the right knee to destabilise the right tibiofemoral joint. They were sacrificed 6 weeks post-surgery and a silicon-based micro-bead contrast agent was injected in the joint space, before scanning with micro-computed tomography (microCT). Subsequently, 3D quantitative morphometric analysis (QMA), previously developed for rabbit joints, was performed. This included cartilage, subchondral cortical and epiphyseal bone measures, as well as novel tibiofemoral joint metrics. Semi-quantitative evaluation was performed on matching two-dimensional (2D) histology and microCT images. Reproducibility of the QMA was tested on eleven age-matched additional joints. The results indicate the QMA method is accurate and reproducible and that microCT-derived cartilage measurements are valid for the analysis of rat joints. The pathologic changes caused by transection of the ACL and medial meniscectomy were reflected in measurements of bone shape, cartilage morphology, and joint alignment. Furthermore, we were able to identify model-specific predictive parameters based on morphometric parameters measured with the QMA.

Crataegus pinnatifida Bunge Inhibits RANKL-Induced Osteoclast Differentiation in RAW 264.7 Cells and Prevents Bone Loss in an Ovariectomized Rat Model

Osteoporosis is characterized by a decrease in bone microarchitecture with an increased risk of fracture. Long-term use of primary treatments, such as bisphosphonates and selective estrogen receptor modulators, results in various side effects. Therefore, it is necessary to develop alternative therapeutics derived from natural products. Crataegus pinnatifida Bunge (CPB) is a dried fruit used to treat diet-induced indigestion, loss of appetite, and diarrhea. However, research into the effects of CPB on osteoclast differentiation and osteoporosis is still limited. In vitro experiments were conducted to examine the effects of CPB on RANKL-induced osteoclast differentiation in RAW 264.7 cells. Moreover, we investigated the effects of CPB on bone loss in the femoral head in an ovariectomized rat model using microcomputed tomography. In vitro, tartrate-resistant acid phosphatase (TRAP) staining results showed the number of TRAP-positive cells, and TRAP activity significantly decreased following CPB treatment. CPB also significantly decreased pit formation. Furthermore, CPB inhibited osteoclast differentiation by suppressing NFATc1, and c-Fos expression. Moreover, CPB treatment inhibited osteoclast-related genes, such as Nfatc1, Ca2, Acp5, mmp9, CtsK, Oscar, and Atp6v0d2. In vivo, bone mineral density and structure model index were improved by administration of CPB. In conclusion, CPB prevented osteoclast differentiation in vitro and prevented bone loss in vivo. Therefore, CPB could be a potential alternative medicine for bone diseases, such as osteoporosis.

Guidelines for Micro-Computed Tomography Analysis of Rodent Dentoalveolar Tissues

Micro–computed tomography (μCT) has become essential for analysis of mineralized as well as nonmineralized tissues and is therefore widely applicable in the life sciences. However, lack of standardized approaches and protocols for scanning, analyzing, and reporting data often makes it difficult to understand exactly how analyses were performed, how to interpret results, and if findings can be broadly compared with other models and studies. This problem is compounded in analysis of the dentoalveolar complex by the presence of four distinct mineralized tissues: enamel, dentin, cementum, and alveolar bone. Furthermore, these hard tissues interface with adjacent soft tissues, the dental pulp and periodontal ligament (PDL), making for a complex organ. Drawing on others' and our own experience analyzing rodent dentoalveolar tissues by μCT, we introduce techniques to successfully analyze dentoalveolar tissues with similar or disparate compositions, densities, and morphological characteristics. Our goal is to provide practical guidelines for μCT analysis of rodent dentoalveolar tissues, including approaches to optimize scan parameters (filters, voltage, voxel size, and integration time), reproducibly orient samples, define regions and volumes of interest, segment and subdivide tissues, interpret findings, and report methods and results. We include illustrative examples of analyses performed on genetically engineered mouse models with phenotypes in enamel, dentin, cementum, and alveolar bone. The recommendations are designed to increase transparency and reproducibility, promote best practices, and provide a basic framework to apply μCT analysis to the dentoalveolar complex that can also be extrapolated to a variety of other tissues of the body. © 2021 The Authors. JBMR Plus published by Wiley Periodicals LLC. on behalf of American Society for Bone and Mineral Research.

Asymmetric midshaft femur remodeling in an adult male with left sided hip joint ankylosis, Metal Period Nagsabaran, Philippines

OBJECTIVE

This study investigated microstructural changes of the right and left midshaft femur in an archaeological individual afflicted with left-sided hip joint ankylosis to assess whether increased cortical porosity was present as a result of leg disuse.

MATERIALS

The individual is a middle-aged adult male excavated from the Metal Period (∼2000 BP) Nagsabaran, Luzon Island, Philippines.

METHODS

Following standard examination of femur gross anatomy and differential diagnosis of the hip joint fusion, ∼1 cm thick posterior midshaft femur samples were removed for microstructural examination. Using static histomorphometry, bone multi-cellular unit activity from Haversian canal (vascular pore) density, area, and circularity was reconstructed. Spatial positioning of Haversian canals was mapped using Geographic Information Systems software. Phosphate, carbonate, and carbonate:phosphate ratios were obtained using synchrotron-sourced Fourier transform infrared microspectroscopy.

RESULTS

The left femur had greater cortical pore density, with smaller and rounder vascular canals, in addition to lower matrix levels of phosphate and carbonate, when compared to the right femur.

CONCLUSIONS

Our data indicate compromised bone tissue in the left femur, and conform to expected bone functional adaptation paradigms of remodeling responses to pathological and biomechanical changes.

SIGNIFICANCE

The preservation of this individual's hip abnormality created a unique opportunity to evaluate intra-skeletal bone health asymmetry, which may help other researchers evaluate the presence of limb disuse in archaeological samples.

LIMITATIONS

A lack of lower limb data limits our interpretations to femur remodeling only.

SUGGESTIONS FOR FURTHER RESEARCH

Future research efforts should aim to examine the presence of remodeling changes in all bones of the lower limb.

LAYUNIN

Gamit ang buto ng magkabilang pemur ng isang taong natagpuan sa isang archaeological site na may sakit na ankylosis sa kaliwang balakang, pinag-aralan ang iba't-ibang microstructures galing sa gitnang bahagi o midshaft ng pemur upang malaman kung may makikitang mataas na cortical porosity ang buto dahil hindi ito malimit gamitin.

GAMIT

Ang pinag-aaralang buto ay galing sa isang indibidwal na tinatayang middle-age na lalaki na namuhay noong Panahon ng Metal (∼2000 BP) sa Nagsabaran, Cagayan, Republika ng Pilipinas.

PAMAMARAAN

Matapos ang unang pagkilatis sa femur at ang pagkilala ng sakit sa balakang, kumuha ng ∼1 sentimetro ng buto galing sa midshaft ng pemur upang lalong mapag-aralan ang kanyang microstructure. Gamit ang static histomorphometry, napag-aralan ang mga naiwang bakas ng multi-cellular unit activity ayon sa kapal, laki at pagkakabilog ng Haversian canal (vascular pore). Gumamit din ng Geographic Information Systems (GIS) software upang mapag-aralan ang kaugnayan ng posisyon ng Haversian canal. Panghuli, gumamit din ng synchroton-sourced Fourier transform infrared (sFTIR) microspectroscopy upang makuha ang bilang ng phosphate, carbonate, at carbonate:phosphate ratio.

RESULTA

Napag-alaman na ang kaliwang pemur ay mayroong higit na maraming cortical pores, maliit at mabilog na vascular canals, at mababang bilang ng phosphate, carbonate kung ihahambing sa kanang pemur.

KONKLUSYON

Ayon sa aming datos, ang kaliwang pemur ay umaayon sa mga katangian ng isang butong may sakit. Sumunod din ito sa inaasahang bone functional adaptation paradigms of remodeling ng buto dahil may sakit at hindi nagamit.

KAHALAGAHAN

Dahil maganda ang pagkakalibing ng buto ng balakang, nagkaroon ng pagkakataong makilatis ang kalusugan ng sinaunang-tao sa pamamagitan ng pag-aaral ng kalusugan ng buto. Dagdag pa, makakatulong din ito upang malaman kung ibang mananaliksik ang pag-aaral ng ibang butong hindi nagagamit mula sa archaeological site.

LIMITASYON

Dahil walang nakuhang ibang buto mula sa binti at paa, ang pemur lang ang naimbestigahan.

MUNGKAHI PARA SA MGA SUSUNOD NA PAG-AARAL

Kung magkakaroon ng pagkakataon sa susunod, dapat maimbistigahan ang lahat ng buto ng binti (lower limb).

Validation of HR-pQCT against micro-CT for morphometric and biomechanical analyses: A review

High-resolution peripheral quantitative computed-tomography (HR-pQCT) has the potential to become a powerful clinical assessment and diagnostic tool. Given the recent improvements in image resolution, from 82 to 61 μm, this technology may be used to accurately quantify in vivo bone microarchitecture, a key biomarker of degenerative bone diseases. However, computational methods to assess bone microarchitecture were developed for micro computed tomography (micro-CT), a higher-resolution technology only available for ex vivo studies, and validation of these computational analysis techniques against the gold-standard micro-CT has been inconsistent and incomplete. Herein, we review methods for segmentation of bone compartments and microstructure, quantification of bone morphology, and estimation of mechanical strength using finite-element analysis, highlighting the need throughout for improved standardization across the field. Studies have relied on homogenous datasets for validation, which does not allow for robust comparisons between methods. Consequently, the adaptation and validation of novel segmentation approaches has been slow to non-existent, with most studies still using the manufacturer's segmentation for morphometric analysis despite the existence of better performing alternative approaches. The promising accuracy of HR-pQCT for capturing morphometric indices is overshadowed by considerable variability in outcomes between studies. For finite element analysis (FEA) methods, the use of disparate material models and FEA tools has led to a fragmented ability to assess mechanical bone strength with HR-pQCT. Further, the scarcity of studies comparing 62 μm HR-pQCT to the gold standard micro-CT leaves the validation of this imaging modality incomplete. This review revealed that without standardization, the capabilities of HR-pQCT cannot be adequately assessed. The need for a public, extendable, heterogeneous dataset of HR-pQCT and corresponding gold-standard micro-CT images, which would allow HR-pQCT users to benchmark existing and novel methods and select optimal methods depending on the scientific question and data at hand, is now evident. With more recent advancements in HR-pQCT, the community must learn from its past and provide properly validated technologies to ensure that HR-pQCT can truly provide value in patient diagnosis and care.

The phytoestrogen glabrene prevents osteoporosis in ovariectomized rats through upregulation of the canonical Wnt/β-catenin signaling pathway

This study systematically investigated the effects of phytoestrogen glabrene on postmenopausal osteoporosis in an ovariectomy (OVX) rat model. Glabrene administration (25, 50, and 100 mg/kg) for 13 weeks can significantly slow down the body weight gain and slightly increase the uterus weight of OVX rats. The increased levels of U-Ca, U-P levels, urine DPD/creatinine, serum ALP, OCN, triglycerides, and total cholesterol induced by OVX were dramatically inhibited in rats, whereas no difference occurred for S-Ca and S-P in all groups. Furthermore, glabrene can enhance bone mineral density of the right femur, fourth-lumbar vertebra and tibia and improve biomechanical parameters, such as femoral neck loading force, three-point bending of the tibia, and vertebral compression in OVX rats. Moreover, glabrene greatly suppressed the expression of TRAP protein but increased OPG and BGP protein expression in tibia tissue of OVX rats. In addition, OVX-induced reduction of Lrp-5, β-catenin, Runx2, and Osx protein expression was all restored by glabrene treatment. The present study indicated that glabrene might be a potential alternative medicine for the prevention and treatment of postmenopausal osteoporosis via activation of the Wnt/β-catenin signaling pathway.

Contrast-enhanced micro-computed tomography of articular cartilage morphology with ioversol and iomeprol

Non-ionic, low-osmolar contrast agents (CAs) used for computed tomography, such as Optiray (ioversol) and Iomeron (iomeprol), are associated with the reduced risk of adverse reactions and toxicity in comparison with ionic CAs, such as Hexabrix. Hexabrix has previously been used for imaging articular cartilage but has been commercially discontinued. This study aimed to evaluate the efficacy of Optiray and Iomeron as alternatives for visualisation of articular cartilage in small animal joints using contrast-enhanced micro-computed tomography (CECT). For this purpose, mouse femora were immersed in different concentrations (20%-50%) of Optiray 350 or Iomeron 350 for periods of time starting at five minutes. The femoral condyles were scanned ex vivo using CECT, and regions of articular cartilage manually contoured to calculate mean attenuation at each time point and concentration. For both CAs, a 30% CA concentration produced a mean cartilage attenuation optimally distinct from both bone and background signal, whilst 5-min immersion times were sufficient for equilibration of CA absorption. Additionally, plugs of bovine articular cartilage were digested by chondroitinase ABC to produce a spectrum of glycosaminoglycan (GAG) content. These samples were immersed in CA and assessed for any correlation between mean attenuation and GAG content. No significant correlation was found between attenuation and cartilage GAG content for either CAs. In conclusion, Optiray and Iomeron enable high-resolution morphological assessment of articular cartilage in small animals using CECT; however, they are not indicative of GAG content.

Dose-dependent skeletal deficits due to varied reductions in mechanical loading in rats

Reduced skeletal loading leads to marked bone loss. Animal models of hindlimb suspension are widely used to assess alterations in skeleton during the course of complete unloading. More recently, the effects of partial unloading on the musculoskeletal system have been interrogated in mice and rats, revealing dose-dependent effects of partial weight bearing (PWB) on the skeleton and skeletal muscle. Here, we extended these studies to determine the structural and functional skeletal alterations in 14-week-old male Wister rats exposed to 20%, 40%, 70%, or 100% of body weight for 1, 2, or 4 weeks (n = 11-12/group). Using in vivo pQCT, we found that trabecular bone density at the proximal tibia declined in proportion to the degree of unloading and continued progressively with time, without evidence of a plateau by 4 weeks. Ex vivo measurements of trabecular microarchitecture in the distal femur by microcomputed tomography revealed deficits in bone volume fraction, 2 and 4 weeks after unloading. Histologic analyses of trabecular bone in the distal femur revealed the decreased osteoblast number and mineralizing surface in unloaded rats. Three-point bending of the femoral diaphysis indicated modest or no reductions in femoral stiffness and estimated modulus due to PWB. Our results suggest that this rat model of PWB leads to trabecular bone deterioration that is progressive and generally proportional to the degree of PWB, with minimal effects on cortical bone.

Spirulina Enhances Bone Modeling in Growing Male Rats by Regulating Growth-Related Hormones

In recent years, growth hormone deficiency in children has been treated with hormone therapy despite the possible significant side effects. Therefore, it was deemed beneficial to develop functional foods or dietary supplements for safely improving children's growth. Spirulina platensis is known for its high antioxidant, anti-aging, anti-cancer, and immunity-enhancing properties, as well as its high digestibility and high protein content, but little has been reported about its influence on bone development in children with a normal supply of protein. In this study, we evaluated the effects of spirulina on the bone metabolism and antioxidant profiles of three-week-old growing male rats. The animals were divided into four groups (n = 17 per group) and were fed AIN93G diets with 0% (control), 30% (SP30), 50% (SP50), and 70% (SP70) of casein protein replaced by spirulina, respectively, for seven weeks. We observed that spirulina enhanced bone growth and bone strength by stimulating parathyroid hormone and growth hormone activities, as well its increased antioxidant activity. These results indicate that spirulina provides a suitable dietary supplement and alternative protein source with antioxidant benefits for growth improvement in early developmental stages.

Aucubin exerts anti-osteoporotic effects by promoting osteoblast differentiation

Osteoporosis is a metabolic disease characterized by reduced osteoblast differentiation and proliferation. Oxidative stress plays a role in the pathogenesis of osteoporosis. Aucubin (AU), an iridoid glycoside, was previously shown to promote osteoblast differentiation. We investigated the effects of AU on MG63 human osteoblast-like cells treated with dexamethasone (Dex) or hydrogen peroxide (H₂O₂) to induce oxidative damage. AU protected MG63 cells against apoptosis, and promoted increased expression of cytokines associated with osteoblast differentiation, including collagen I, osteocalcin (OCN), osteopontin (OPN), and osterix. In Dex- and H₂O₂-treated MG63 cells, AU also enhanced the expression of anti-oxidative stress-associated factors in the nuclear respiratory factor 2 signaling pathway, including superoxide dismutases 1 and 2, heme oxygenases 1 and 2, and catalase. In vivo, using a Dex-induced mouse model of osteoporosis, AU promoted increased cortical bone thickness, increased bone density, and tighter trabecular bone. Additionally, it stimulated an increase in the expression of collagen I, OCN, OPN, osterix, and phosphorylated Akt and Smads in bone tissue. Finally, AU stimulated the expression of cytokines associated with osteoblast differentiation in bone tissue and serum. Our data indicate AU may have therapeutic efficacy in osteoporosis.

Ursolic Acid Prevents Retinoic Acid-Induced Bone Loss in Rats

OBJECTIVE

To examine the effects of ursolic acid (UA) on mitigating retinoic acid (RA)-induced osteoporosis in rats.

METHODS

Fifty female Sprague-Dawley rats were randomly divided into the control group (n=10) and the osteoporosis group (n=40). The 40 osteoporosis rats were induced by 75 mg/(kg•d) RA once daily for 2 weeks, and then were randomly assigned to vehicle control (model), low-, middle-, and high-dose UA [(UA-L, UA-M, UA-H; 30, 60, 120 mg/(kg•d), respectively] groups (10 rats each). UA were administered once daily to the rats from the 3rd weeks for up to 4 weeks by gavage. Bone turnover markers [serum alkaline phosphatase (ALP), osteocalcin (OCN), urine deoxypyridinoline (DPD)] and other parameters, including serum calcium (S-Ca), serum phosphorus (S-P), urine calcium (U-Ca), urine phosphorus (U-P), and bone mineral density (BMD) of the femur, 4th lumbar vertebra and tibia, bone biomechanical properties and trabecular microarchitecture, were measured.

RESULTS

The osteoporosis in rats was successfully induced by RA. Compared with the model group, UA-M and UA-H significantly reversed the RA-induced changes in S-P, U-Ca, U-P, ALP, OCN and urine DPD ratio and markedly enhanced the BMD of right femur, 4th lumbar vertebra and tibia (Plt;0.05 or Plt;0.01). Further, biomechanical test and microcomputed tomography evaluation also showed that UA-H drastically improved biomechanical properties and trabecular microarchitecture (Plt;0.05 or Plt;0.01).

CONCLUSION

UA could promote bone formation, increase osteoblastic activity and reduce osteoclastic activity in rats, indicating that UA might be a potential therapeutic of RA-induced acute osteoporosis.

Use of Micro-Computed Tomography for Bone Evaluation in Dentistry

Micro computed tomography (µCT) follows the same principle of computed-tomography used for patients, however providing higher-resolution. Using a non-destructive approach, samples can be scanned, and each section obtained is used to build a volume using tridimensional reconstruction. For bone analysis, it is possible to obtain information about the tissue's microarchitecture and composition. According to the characteristics of the bone sample (e.g. human or animal origin, long or irregular shape, epiphysis or diaphysis region) the pre-scanning parameters must be defined. The resolution (i.e. voxel size) should be chosen taking into account the features that will be evaluated, and the necessity to identify inner structures (e.g. bone channels and osteocyte lacunae). The region of interest should be delimited, and the threshold that defines the bone tissue set in order to proceed with binarization to separate the voxels representing bone from the other structures (channels, resorption areas, and medullary space). Cancellous bone is evaluated by means of the trabeculae characteristics and their connectivity. The cortex is evaluated in relation to the thickness and porosity. Bone mineral density can also be measured, by the amount of hydroxyapatite. Other parameters such as structure-model-index, anisotropy, and fractal dimension can be assessed. In conclusion, intrinsic and extrinsic determinants of bone quality can be assessed by µCT. In dentistry, this method can be used for evaluating bone loss, alterations in bone metabolism, or the effects of using drugs that impair bone remodeling, and also to assess the success rate of bone repair or surgical procedures.

Technetium-99 Conjugated with Methylene Diphosphonate Ameliorates Glucocorticoid Induced Osteoporosis by Inhibiting Osteoclastogenesis

Technetium-99 conjugated with methylene diphosphonate (⁹⁹Tc-MDP) is an effective anti-inflammatory drug in treating rheumatoid arthritis (RA) for over 15 years in China. However, as a special form of bisphosphonate, the antiosteoporotic effect of ⁹⁹Tc-MDP is unclear. We systematically investigated the effects of ⁹⁹Tc-MDP on cancellous and cortical bone, respectively, in glucocorticoid induced osteoporosis (GIO) animal models. Forty-eight Sprague-Dawley rats were randomly divided into six groups: blank, negative control, high dose, medium dose, low dose, and positive control groups. After dexamethasone was given to all groups except the blank group to induce osteoporosis, the rats in different groups were treated with saline, MDP, or different doses of ⁹⁹Tc-MDP. After treatment, all rats were sacrificed, and their tibiae and femora were analyzed with microcomputed tomography (micro-CT), histology and biomechanics. Micro-CT analyses showed that (1) ⁹⁹Tc-MDP reversed glucocorticoid induced bone microarchitecture destruction by increasing BV/TV, Tb.Th, and Tb.N and decreasing BS/BV, Tb.Sp, and TBPf; (2) effect of ⁹⁹Tc-MDP increased as its dosage increased; and (3) ⁹⁹Tc-MDP could improve cortical bone thickness while MDP failed to do so. Micro-CT spatial structure analysis and histology also yielded consistent results, indicating that ⁹⁹Tc-MDP increased trabecular number and connectivity morphologically. Secondly, biomechanics revealed that ⁹⁹Tc-MDP can enhance the extrinsic stiffness of bone by changing bone geometry. Finally, ⁹⁹Tc-MDP could inhibit osteoclastogenesis in PBMCs in human. In conclusion, ⁹⁹Tc-MDP exerted antiosteoporotic effect by improving both cancellous and cortical bone, as well as increasing extrinsic bone stiffness which might be attributed to the its inhibition of osteoclast differentiation. The antiosteoporotic effect of ⁹⁹Tc-MDP may suggest a potential clinical application for patients with GIO.

Effect of setting atmosphere on apatite cement resorption: An in vitro and in vivo study

OBJECTIVES

The aim of this present study was to investigate the effect of setting atmosphere on replacement of apatite cement with new bone both in vitro and in vivo.

MATERIAL AND METHODS

Apatite cement consisting of an equimolar mixture of tetracalcium phosphate and anhydrous dicalcium phosphate was mixed with distilled water and allowed to set at 37 °C and 100% relative humidity under 0%_, 5%, and 100% CO₂ atmospheres. X-Ray diffraction and Fourier Transform Infrared Spectroscopy were employed to confirm the carbonate apatite formation. Micro-CT and histological evaluation was made at 1 and 6 month(s) using twelve 10-week-old specific-pathogen-free male Wistar rats.

RESULTS

B-type carbonate apatite was found when the apatite cement was set under 100% CO₂ and 5% CO₂. More carbonate apatite was formed in the case of 100% CO₂ when compared with 5% CO₂, and none was formed under 0% CO₂. Interestingly, unreacted tetracalcium phosphate was significant when apatite cement was set under 0% CO₂, indicating the formation of Ca-deficient hydroxyapatite. When a bone defect of rat tibia was reconstructed in these conditions of apatite cement and sintered hydroxyapatite, replacement of the apatite cement was confirmed 6 months after implantation, whereas no replacement was observed in the case of sintered hydroxyapatite. The amount of replacement of apatite cement with bone was greater, on the order of 100% CO₂ and 5% CO₂, followed by 0% CO₂.

CONCLUSION

The results obtained in the present study demonstrated that setting atmosphere clearly plays an important role in the replacement of set apatite cement with bone.

Sex-, Ethnic-, and Age-Specific Centile Curves for pQCT- and HR-pQCT-Derived Measures of Bone Structure and Strength in Adolescents and Young Adults

There are presently no adolescent centile curves for bone parameters at the tibial midshaft using peripheral quantitative computed tomography (pQCT) or at the distal radius and tibia using high-resolution pQCT (HR-pQCT). Thus, we aimed to develop sex-, ethnic-, site-, and age-specific centile curves for pQCT and HR-pQCT-derived bone outcomes for youth and young adults aged 10 to 21 years. We acquired pQCT scans (XCT3000 or XCT2000) at the tibial midshaft (50% site) and HR-pQCT scans (XtremeCT) at the distal radius (7% site) and tibia (8% site) in a convenience sample of participants in the mixed-longitudinal University of British Columbia Healthy Bones III Study. We scanned 778 10- to 21-year-olds annually for a maximum of 11 years using pQCT (413 girls, 56% Asian; 365 boys, 54% Asian; n = 3160 observations) and 349 10- to 21-year-olds annually for a maximum of 4 years using HR-pQCT (189 girls, 51% Asian; 165 boys, 50% Asian; n = 1090 observations). For pQCT, we report cortical bone mineral density (BMD), total bone cross-sectional area, and polar strength-strain index. For HR-pQCT, we report standard measures (total BMD, trabecular number, thickness, and bone volume fraction) and automated segmentation measures (total bone cross-sectional area, cortical BMD, porosity, and thickness). We applied finite element analysis to estimate failure load. We applied the lamda, mu, sigma (LMS) method using LMS ChartMaker Light (version 2.5, The Institute of Child Health, London, UK) to construct LMS tables and centile plots. We report sex- and age-specific centiles (3rd, 10th, 25th, 50th, 75th, and 97th) for whites and Asians for pQCT bone parameters at the tibial midshaft and HR-pQCT bone parameters at the distal radius and tibia. These centile curves might be used by clinicians and scientists to interpret values or better understand trajectories of bone parameters in clinical populations, those from different geographic regions or of different ethnic origins. © 2018 American Society for Bone and Mineral Research.

Outer-Boundary Assisted Segmentation and Quantification of Trabecular Bones by an Imagej Plugin

Micro-computed tomography (micro-CT) is routinely used to assess bone quantity and trabecular microstructural properties in small animals under different bone loss conditions. However, the standard approach for trabecular analysis of micro-CT images is slice-by-slice semi-automatic hand-contouring, which is labor intensive and error prone. Described here is an efficient method for automatic segmentation of trabecular bones according to the bone's outer boundaries, where trabecular bones can be identified and segmented automatically with accuracy with less operator bias when appropriate segmentation parameters are set. To profile satisfactory segmentation parameters, an image stack of segmentation results is displayed, where all possible combinations of the segmentation parameters are changed one by one in sequence, and segmentation results with associated parameters can easily be visually checked. As a quality-control feature of the plugin, simulated standard objects are quantified where the measured quantities can be compared with theoretical values. Layer-by-layer quantification of trabecular properties and trabecular thicknesses are reported by such a plugin, and the distributions of such properties within the selected regions can be profiled easily. Although layer-by-layer quantification retains more information about trabecular bones and facilitates further statistical analysis of structural changes, such measures are unavailable from the output of current commercial software, where only a single quantified value for each parameter is reported for each sample. Therefore, the described workflows are better approaches for analyzing trabecular bones with accuracy and efficiency.

A novel use of 3D printing model demonstrates the effects of deteriorated trabecular bone structure on bone stiffness and strength

Trabecular bone structure is crucial to normal mechanical behavior of bones. Studies have shown that osteoporosis negatively affects trabecular bone structure, mainly by reducing bone volume fraction (BV/TV) and thus increasing fracture risk. One major limitation in assessing and quantifying the effect of this structural deterioration is that no two trabecular structures are identical. Thus, when we compare a group of healthy bones against a different group of bones that experienced resorption (i.e. decreased BV/TV) we only discover an "average" mechanical effect. It is impossible to quantify the mechanical effect of individual structural deterioration for each sample, simply because we never have the same sample in both states (intact and deteriorated structure). 3D printing is a new technology that can assist in overcoming this issue. Here we report a preliminary study that compares a healthy 3D printed trabecular bone model with the same model after bone resorption was simulated. Since the deteriorated structural bone model is derived from the healthy one, it is possible to directly estimate (percentage wise) the decrease of tissue stiffness and strength as a result of bone resorption for this specific structure. Our results demonstrate that a relatively small decrease in BV/TV (about 8%) leads to a dramatic decrease in structural strength (24%) and structural stiffness (17%), (P < 0.01). Structural strength decreased from an average of 9.14 ± 2.85MPa to 6.97 ± 2.44MPa, while structural stiffness decreased from an average of 282.5 ± 63.4N/mm to 233.8 ± 51.2N/mm. This study demonstrates that 3D printing is a novel and valuable tool for quantifying the effect of structural deterioration on the mechanical properties of trabecular bone. In the future, this approach may help us attain better personal fracture risk assessments by CT scanning, 3D printing and mechanically testing individual bone replicas from patients suffering excessive bone resorption.

A mathematical multiscale model of bone remodeling, accounting for pore space-specific mechanosensation

While bone tissue is a hierarchically organized material, mathematical formulations of bone remodeling are often defined on the level of a millimeter-sized representative volume element (RVE), "smeared" over all types of bone microstructures seen at lower observation scales. Thus, there is no explicit consideration of the fact that the biological cells and biochemical factors driving bone remodeling are actually located in differently sized pore spaces: active osteoblasts and osteoclasts can be found in the vascular pores, whereas the lacunar pores host osteocytes - bone cells originating from former osteoblasts which were then "buried" in newly deposited extracellular bone matrix. We here propose a mathematical description which considers size and shape of the pore spaces where the biological and biochemical events take place. In particular, a previously published systems biology formulation, accounting for biochemical regulatory mechanisms such as the rank-rankl-opg pathway, is cast into a multiscale framework coupled to a poromicromechanical model. The latter gives access to the vascular and lacunar pore pressures arising from macroscopic loading. Extensive experimental data on the biological consequences of this loading strongly suggest that the aforementioned pore pressures, together with the loading frequency, are essential drivers of bone remodeling. The novel approach presented here allows for satisfactory simulation of the evolution of bone tissue under various loading conditions, and for different species; including scenarios such as mechanical dis- and overuse of murine and human bone, or in osteocyte-free bone.

Contrast enhanced μCT imaging of early articular changes in a pre-clinical model of osteoarthritis

OBJECTIVE

The objective of this study was to characterize early osteoarthritis (OA) development in cartilage and bone tissues in the rat medial meniscus transection (MMT) model using non-destructive equilibrium partitioning of an ionic contrast agent micro-computed tomography (EPIC-μCT) imaging. Cartilage fibrillation, one of the first physiological developments in OA, was quantified in the rat tibial plateau as three-dimensional (3D) cartilage surface roughness using a custom surface-rendering algorithm.

METHODS

Male Lewis rats underwent MMT or sham-operation in the left leg. At 1- and 3-weeks post-surgery, the animals (n = 7-8 per group) were euthanized and the left legs were scanned using EPIC-μCT imaging to quantify cartilage and bone parameters. In addition, a custom algorithm was developed to measure the roughness of 3D surfaces. This algorithm was validated and used to quantify cartilage surface roughness changes as a function of time post-surgery.

RESULTS

MMT surgery resulted in significantly greater cartilage damage and subchondral bone sclerosis with the damage increasing in both severity and area from 1- to 3-weeks post-surgery. Analysis of rendered 3D surfaces could accurately distinguish early changes in joints developing OA, detecting significant increases of 45% and 124% in surface roughness at 1- and 3-weeks post-surgery respectively.

CONCLUSION

Disease progression in the MMT model progresses sequentially through changes in the cartilage articular surface, extracellular matrix composition, and then osteophyte mineralization and subchondral bone sclerosis. Cartilage surface roughness is a quantitative, early indicator of degenerative joint disease in small animal OA models and can potentially be used to evaluate therapeutic strategies.

Oral administration of undenatured native chicken type II collagen (UC-II) diminished deterioration of articular cartilage in a rat model of osteoarthritis (OA)

OBJECTIVE

The aim of this study was to determine the ability of undenatured native chicken type II collagen (UC-II) to prevent excessive articular cartilage deterioration in a rat model of osteoarthritis (OA).

METHODS

Twenty male rats were subjected to partial medial meniscectomy tear (PMMT) surgery to induce OA. Immediately after the surgery 10 rats received vehicle and another 10 rats oral daily dose of UC-II at 0.66 mg/kg for a period of 8 weeks. In addition 10 naïve rats were used as an intact control and another 10 rats received sham surgery. Study endpoints included a weight-bearing capacity of front and hind legs, serum biomarkers of bone and cartilage metabolism, analyses of subchondral and cancellous bone at the tibial epiphysis and metaphysis, and cartilage pathology at the medial tibial plateau using histological methods.

RESULTS

PMMT surgery produced moderate OA at the medial tibial plateau. Specifically, the deterioration of articular cartilage negatively impacted the weight bearing capacity of the operated limb. Immediate treatment with the UC-II preserved the weight-bearing capacity of the injured leg, preserved integrity of the cancellous bone at tibial metaphysis and limited the excessive osteophyte formation and deterioration of articular cartilage.

CONCLUSION

Study results demonstrate that a clinically relevant daily dose of UC-II when applied immediately after injury can improve the mechanical function of the injured knee and prevent excessive deterioration of articular cartilage.

Bouts of Vigorous Physical Activity and Bone Strength Accrual During Adolescence

PURPOSE

We examined the influence of vigorous physical activity (VPA) bout frequency on bone strength accrual across adolescence, independent of total volume of VPA.

METHODS

We measured VPA (6 metabolic equivalents; total volume and bout frequency <5 min in duration) annually using waist-worn accelerometers (ActiGraph GT1M) in 309 adolescents (9-20 y at baseline: 99, <13 y; 126, 13-18 y; 84, >18 y) over a maximum of 4 years. We applied finite element analysis to high-resolution peripheral quantitative computed tomography scans of the distal tibia (8% site) to estimate bone strength (failure load; F.Load, Newtons). We fit a mixed effects model with maturity offset (years from age at peak height velocity) as a random effect and sex, ethnicity, tibia length, lean body mass, and VPA (volume and bout frequency) as fixed effects.

RESULTS

VPA volume and bout frequency were positively associated with F.Load across adolescence; however, VPA volume did not predict F.Load once VPA bout frequency was included in the model. Participants in the upper quartile of VPA bout frequency (∼33 bouts per day) had 10% (500 N) greater F.Load across adolescence compared with participants in the lowest quartile (∼9 bouts per day; P = .012). Each additional daily bout of VPA was associated with 21 N greater F.Load, independent of total volume of VPA.

CONCLUSION

Frequent VPA should be promoted for optimal bone strength accrual.

Automated Quantitative Bone Analysis in In Vivo X-ray Micro-Computed Tomography

Measurement and analysis of bone morphometry in 3D micro-computed tomography volumes using automated image processing and analysis improve the accuracy, consistency, reproducibility, and speed of preclinical osteological research studies. Automating segmentation and separation of individual bones in 3D micro-computed tomography volumes of murine models presents significant challenges considering partial volume effects and joints with thin spacing, i.e., 50 to [Formula: see text]. In this paper, novel hybrid splitting filters are presented to overcome the challenge of automated bone separation. This is achieved by enhancing joint contrast using rotationally invariant second-derivative operators. These filters generate split components that seed marker-controlled watershed segmentation. In addition, these filters can be used to separate metaphysis and epiphysis in long bones, e.g., femur, and remove the metaphyseal growth plate from the detected bone mask in morphometric measurements. Moreover, for slice-by-slice stereological measurements of long bones, particularly curved bones, such as tibia, the accuracy of the analysis can be improved if the planar measurements are guided to follow the longitudinal direction of the bone. In this paper, an approach is presented for characterizing the bone medial axis using morphological thinning and centerline operations. Building upon the medial axis, a novel framework is presented to automatically guide stereological measurements of long bones and enhance measurement accuracy and consistency. These image processing and analysis approaches are combined in an automated streamlined software workflow and applied to a range of in vivo micro-computed tomography studies for validation.

Physical Activity, Sedentary Time, and Bone Strength From Childhood to Early Adulthood: A Mixed Longitudinal HR-pQCT study

Bone strength is influenced by bone geometry, density, and bone microarchitecture, which adapt to increased mechanical loads during growth. Physical activity (PA) is essential for optimal bone strength accrual; however, less is known about how sedentary time influences bone strength and its determinants. Thus, our aim was to investigate the prospective associations between PA, sedentary time, and bone strength and its determinants during adolescence. We used HR-pQCT at distal tibia (8% site) and radius (7% site) in 173 girls and 136 boys (aged 9 to 20 years at baseline). We conducted a maximum of four annual measurements at the tibia (n = 785 observations) and radius (n = 582 observations). We assessed moderate-to-vigorous PA (MVPA) and sedentary time with accelerometers (ActiGraph GT1M). We aligned participants on maturity (years from age at peak height velocity) and fit a mixed-effects model adjusting for maturity, sex, ethnicity, leg muscle power, lean mass, limb length, dietary calcium, and MVPA in sedentary time models. MVPA was a positive independent predictor of bone strength (failure load [F.Load]) and bone volume fraction (BV/TV) at the tibia and radius, total area (Tt.Ar) and cortical porosity (Ct.Po) at the tibia, and negative predictor of load-to-strength ratio at the radius. Sedentary time was a negative independent predictor of Tt.Ar at both sites and Ct.Po at the tibia and a positive predictor of cortical thickness (Ct.Th), trabecular thickness (Tb.Th), and cortical bone mineral density (Ct.BMD) at the tibia. Bone parameters demonstrated maturity-specific associations with MVPA and sedentary time, whereby associations were strongest during early and mid-puberty. Our findings support the importance of PA for bone strength accrual and its determinants across adolescent growth and provide new evidence of a detrimental association of sedentary time with bone geometry but positive associations with microarchitecture. This study highlights maturity-specific relationships of bone strength and its determinants with loading and unloading. Future studies should evaluate the dose-response relationship and whether associations persist into adulthood. © 2017 American Society for Bone and Mineral Research.

Total Flavonoids of Drynariae Rhizoma Prevent Bone Loss Induced by Hindlimb Unloading in Rats

Drynariae Rhizoma is a kidney-tonifying herb that has a long history in clinical practice for the treatment of bone fractures and joint diseases in China. Flavonoids are considered to be its major active ingredients and are reported to ease bone loss in ovariectomized rats. However, the beneficial effects of the total flavonoids of Drynariae Rhizoma on osteoporosis caused by microgravity or mechanical inactivity remain unknown. This study assessed the effects of total Drynariae Rhizoma flavonoids (DRTF, Qihuang, Beijing, China, national medicine permit No. Z20030007, number of production: 04080081, content of DRTF ≥80%) against bone loss induced by simulated microgravity. A hindlimb unloading tail-suspended rat model was established to determine the effect of DRTF on bone mineral density (BMD), biomechanical strength and trabecular bone microarchitecture. Twenty-eight male Sprague-Dawley rats were divided into four groups: the baseline, control, hindlimb unloading with vehicle (HLU), and hindlimb unloading treated with DRTF (HLU-DRTF, 75 mg/kg/day) groups. Oral DRTF was administered for 4 weeks. The underlying mechanisms of the DRTF actions on disuse-induced osteoporosis are discussed. The results showed that DRTF treatment significantly increased the BMD and mechanical strength of tail-suspended rats. Enhanced bone turnover markers with HLU treatment were attenuated by DRTF administration. Deterioration of trabecular bone induced by HLU was prevented through elevated bone volume/tissue volume (BV/TV), trabecular number (Tb. N), trabecular thickness (Tb. Th) and decreased trabecular separation (Tb. Sp). The present study provides the first evidence that DRTF prevents bone loss induced by HLU treatment, indicating its potential application in the treatment of disuse-induced osteoporosis.

μCT-based trabecular anisotropy can be reproducibly computed from HR-pQCT scans using the triangulated bone surface

The trabecular structure can be assessed at the wrist or tibia via high-resolution peripheral quantitative computed tomography (HR-pQCT). Yet on this modality, the performance of the existing methods, evaluating trabecular anisotropy is usually overlooked, especially in terms of reproducibility. We thus proposed to compare the TRI routine used by SCANCO Medical AG (Brüttisellen, Switzerland), the classical mean intercept length (MIL), and the grey-level structure tensor (GST) to the mean surface length (MSL), a new method for evaluating a second-order fabric tensor based on the triangulation of the bone surface. The distal radius of 24 fresh-frozen human forearms was scanned three times via HR-pQCT protocols (61μm, 82μm nominal voxel size), dissected, and imaged via micro computed tomography (μCT) at 16μm nominal voxel size. After registering the scans, we compared for each resolution the fabric tensors, determined by the mentioned techniques for 182 trabecular regions of interest. We then evaluated the reproducibility of the fabric information measured by HR-pQCT via precision errors. On μCT, TRI and GST were respectively the best and worst surrogates for MIL_μCT (MIL computed on μCT) in terms of eigenvalues and main direction of anisotropy. On HR-pQCT, however, MSL provided the best approximation of MIL_μCT. Surprisingly, surface-based approaches (TRI, MSL) also proved to be more precise than both MIL and GST. Our findings confirm that MSL can reproducibly estimate MIL_μCT, the current gold standard. MSL thus enables the direct mapping of the fabric-dependent material properties required in homogenised HR-pQCT-based finite element models.

Reduced bone formation markers, and altered trabecular and cortical bone mineral densities of non-paretic femurs observed in rats with ischemic stroke: A randomized controlled pilot study

Background

Immobility and neural damage likely contribute to accelerated bone loss after stroke, and subsequent heightened fracture risk in humans.

Objective

To investigate the skeletal effect of middle cerebral artery occlusion (MCAo) stroke in rats and examine its utility as a model of human post-stroke bone loss.

Methods

Twenty 15-week old spontaneously hypertensive male rats were randomized to MCAo or sham surgery controls. Primary outcome: group differences in trabecular bone volume fraction (BV/TV) measured by Micro-CT (10.5 micron istropic voxel size) at the ultra-distal femur of stroke affected left legs at day 28. Neurological impairments (stroke behavior and foot-faults) and physical activity (cage monitoring) were assessed at baseline, and days 1 and 27. Serum bone turnover markers (formation: N-terminal propeptide of type 1 procollagen, PINP; resorption: C-terminal telopeptide of type 1 collagen, CTX) were assessed at baseline, and days 7 and 27.

Results

No effect of stroke was observed on BV/TV or physical activity, but PINP decreased by -24.5% (IQR -34.1, -10.5, p = 0.046) at day 27. In controls, cortical bone volume (5.2%, IQR 3.2, 6.9) and total volume (6.4%, IQR 1.2, 7.6) were higher in right legs compared to left legs, but these side-to-side differences were not evident in stroke animals.

Conclusion

MCAo may negatively affect bone formation. Further investigation of limb use and physical activity patterns after MCAo is required to determine the utility of this current model as a representation of human post-stroke bone loss.

Sex Differences and Growth-Related Adaptations in Bone Microarchitecture, Geometry, Density, and Strength From Childhood to Early Adulthood: A Mixed Longitudinal HR-pQCT Study

Sex differences in bone strength and fracture risk are well documented. However, we know little about bone strength accrual during growth and adaptations in bone microstructure, density, and geometry that accompany gains in bone strength. Thus, our objectives were to (1) describe growth related adaptations in bone microarchitecture, geometry, density, and strength at the distal tibia and radius in boys and girls; and (2) compare differences in adaptations in bone microarchitecture, geometry, density, and strength between boys and girls. We used HR-pQCT at the distal tibia (8% site) and radius (7% site) in 184 boys and 209 girls (9 to 20 years old at baseline). We aligned boys and girls on a common maturational landmark (age at peak height velocity [APHV]) and fit a mixed effects model to these longitudinal data. Importantly, boys showed 28% to 63% greater estimated bone strength across 12 years of longitudinal growth. Boys showed 28% to 80% more porous cortices compared with girls at both sites across all biological ages, except at the radius at 9 years post-APHV. However, cortical density was similar between boys and girls at all ages at both sites, except at 9 years post-APHV at the tibia when girls' values were 2% greater than boys'. Boys showed 13% to 48% greater cortical and total bone area across growth. Load-to-strength ratio was 26% to 27% lower in boys at all ages, indicating lower risk of distal forearm fracture compared with girls. Contrary to previous HR-pQCT studies that did not align boys and girls at the same biological age, we did not observe sex differences in Ct.BMD. Boys' superior bone size and strength compared with girls may confer them a protective advantage. However, boys' consistently more porous cortices may contribute to their higher fracture incidence during adolescence. Large prospective studies using HR-pQCT that target boys and girls who have sustained a fracture are needed to verify this. © 2016 American Society for Bone and Mineral Research.

Selective protein depletion impairs bone growth and causes liver fatty infiltration in female rats: prevention by Spirulina alga

Chronic protein malnutrition leads to child mortality in developing countries. Spirulina alga (Spi), being rich in protein and growing easily, is a good candidate as supplementation. We showed that Spi completely prevents bone growth retardation and liver disturbances observed in young rats fed a low protein diet. This supports Spi as a useful source of vegetable protein to fight against protein malnutrition.

INTRODUCTION

Chronic malnutrition is a main factor of child mortality in developing countries. A low protein diet impairs whole-body growth and leads to fatty liver in growing rats. Spi has great potential as a supplementation as it has a 60 % protein content and all essential amino acids. However, its specific impact on bone growth and the related secretion of hepatokines have not yet been studied.

METHODS

To address this question, 6-week-old female rats were fed isocaloric diets containing 10 % casein, 5 % casein, or 5 % casein + 5 % protein from Spi during 9 weeks. Changes in tibia geometry, microarchitecture, BMC, BMD, and biomechanical properties were analyzed. Serum IGF-I, FGF21, follistatin, and activin A were assessed as well as their hepatic gene expressions in addition to those of Sirt1, Ghr, and Igf1r. Hepatic fat content was also assessed.

RESULTS

A low protein diet altered bone geometry and reduced proximal tibia BMD and trabecular bone volume. In addition, it increased hepatic fat content and led to hepatic GH resistance by decreasing serum IGF-I and increasing serum FGF21 without altering serum activin A and follistatin. Spi prevented low protein diet-induced bone, hepatic, and hormonal changes, and even led to higher biomechanical properties and lower hepatic fat content in association with specific InhbA and Follistatin expression changes vs. the 10 % casein group.

CONCLUSIONS

Altogether our results demonstrate the preventive impact of Spi on bone growth delay and hepatic GH resistance in conditions of isocaloric dietary protein deficiency.

Positive Effects of Qing'e Pill () on Trabecular Microarchitecture and its Mechanical Properties in Osteopenic Ovariectomised Mice

OBJECTIVE

To investigate the impact of Qing'e Pill (, QEP) on the cancellous bone microstructure and its effect on the level of β-catenin in a mouse model of postmenopausal osteoporosis.

METHODS

Ninety-six 8-week-old specific pathogen free C57BL/6 mice were randomly divided into 4 groups (24/group): sham, ovariectomised osteoporosis model, oestradiol-treated, and QEP-treated groups. Three months after surgery, the third lumbar vertebra and left femur of the animals were dissected and scanned using micro-computed tomography (micro-CT) to acquire three-dimensional (3D) parameters of their cancellous bone microstructure. The impact of ovariectomy, the effect of oestradiol and QEP intervention on cancellous bone microstructure, and the expression of β-catenin were evaluated.

RESULTS

The oestradioland the QEP-treated groups exhibited a significant increase in the bone volume fraction, trabecular number, trabecular thickneßs, bone surface to bone volume ratio (BS/BV), and β-catenin expression compared with those of the model group (P <0.05). In contrast, the structure model index, trabecular separation, and BS/BV were significantly decreased compared with those of the ovariectomised osteoporosis model group (P <0.05). No differences were observed in the above parameters between animals of the QEP- and oestradiol-treated groups.

CONCLUSIONS

The increased β-catenin expression may be the mechanism underlying QEP's improvement of the cancellous bone microstructure in ovariectomised mice. Our findings provide a scientific rationale for using QEP as a dietary supplement to prevent bone loss in postmenopausal women.

Effects of total flavonoids from Drynariae Rhizoma prevent bone loss in vivo and in vitro

Estrogen deficiency is one of the major causes of osteoporosis in postmenopausal women. Drynariae Rhizoma is a widely used traditional Chinese medicine for the treatment of bone diseases. In this study, we investigated the therapeutic effects of the total Drynariae Rhizoma flavonoids (DRTF) on estrogen deficiency-induced bone loss using an ovariectomized rat model and osteoblast-like MC3T3-E1 cells. Our results indicated that DRTF produced osteo-protective effects on the ovariectomized rats in terms of bone loss reduction, including decreased levels of bone turnover markers, enhanced biomechanical femur strength and trabecular bone microarchitecture deterioration prevention. In vitro experiments revealed that the actions of DRTF on regulating osteoblastic activities were mediated by the estrogen receptor (ER) dependent pathway. Our data also demonstrated that DRTF inhibited osteoclastogenesis via up-regulating osteoprotegrin (OPG), as well as down-regulating receptor activator of NF-κB ligand (RANKL) expression. In conclusion, this study indicated that DRTF treatment effectively suppressed bone mass loss in an ovariectomized rat model, and in vitro evidence suggested that the effects were exerted through actions on both osteoblasts and osteoclasts.

Preservation and promotion of bone formation in the mandible as a response to a novel calcium-phosphate based biomaterial in mineral deficiency induced low bone mass male versus female rats

Calcium and other trace mineral supplements have previously demonstrated to safely improve bone quality. We hypothesize that our novel calcium-phosphate based biomaterial (SBM) preserves and promotes mandibular bone formation in male and female rats on mineral deficient diet (MD). Sixty Sprague-Dawley rats were randomly assigned to receive one of three diets (n = 10): basic diet (BD), MD or mineral deficient diet with 2% SBM. Rats were sacrificed after 6 months. Micro-computed tomography (µCT) was used to evaluate bone volume and 3D-microarchitecture while microradiography (Faxitron) was used to measure bone mineral density from different sections of the mandible. Results showed that bone quality varied with region, gender and diet. MD reduced bone mineral density (BMD) and volume and increased porosity. SBM preserved BMD and bone mineral content (BMC) in the alveolar bone and condyle in both genders. In the alveolar crest and mandibular body, while preserving more bone in males, SBM also significantly supplemented female bone. Results indicate that mineral deficiency leads to low bone mass in skeletally immature rats, comparatively more in males. Furthermore, SBM administered as a dietary supplement was effective in preventing mandibular bone loss in all subjects. This study suggests that the SBM preparation has potential use in minimizing low peak bone mass induced by mineral deficiency and related bone loss irrespective of gender. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1622-1632, 2016.

Hierarchical analysis and multi-scale modelling of rat cortical and trabecular bone

The aim of this study was to explore the hierarchical arrangement of structural properties in cortical and trabecular bone and to determine a mathematical model that accurately predicts the tissue's mechanical properties as a function of these indices. By using a variety of analytical techniques, we were able to characterize the structural and compositional properties of cortical and trabecular bones, as well as to determine the suitable mathematical model to predict the tissue's mechanical properties using a continuum micromechanics approach. Our hierarchical analysis demonstrated that the differences between cortical and trabecular bone reside mainly at the micro- and ultrastructural levels. By gaining a better appreciation of the similarities and differences between the two bone types, we would be able to provide a better assessment and understanding of their individual roles, as well as their contribution to bone health overall.

Strontium (Sr) and silver (Ag) loaded nanotubular structures with combined osteoinductive and antimicrobial activities

Two frequent problems are associated with the titanium surfaces of bone/dental implants: lack of native tissue integration and associated infection. These problems have prompted a significant body of research regarding the modification of these surfaces. The present study describes a hydrothermal treatment for the fabrication of strontium (Sr) and silver (Ag) loaded nanotubular structures with different tube diameters on titanium surfaces. The Sr loading from a Sr(OH)2 solution was regulated by the size of the inner diameter of the titanium nanotubes (NT) (30nm or 80nm, formed at 10V or 40V, respectively). The quantity of Ag was adjusted by immersing the samples in 1.5 or 2.0M AgNO3 solutions. Sr and Ag were released in a controllable and prolonged matter from the NT-Ag.Sr samples, with negligible cytotoxicity. Prominent antibacterial activity was observed due to the release of Ag. Sr incorporation enhanced the initial cell adhesion, migration, and proliferation of preosteoblast MC3T3-E1 cells. Sr release also up-regulated the expression of osteogenic genes and induced mineralization, as suggested by the presence of more mineralized calcium nodules in cells cultured on NT-Ag.Sr surfaces. In vivo experiments showed that the Sr-loaded samples accelerated the formation of new bone in both osteoporosis and bone defect models, as confirmed by X-ray, Micro-CT evaluation, and histomorphometric analysis of rats implanted with NT-Ag.Sr samples. The antibacterial activity and outstanding osteogenic properties of NT-Ag.Sr samples highlight their excellent potential for use in clinical applications.

STATEMENT OF SIGNIFICANCE

Two frequent problems associated with Ti surfaces, widely used in orthopedic and dental arenas, are their lack of native tissue integration and risk of infection. We describe a novel approach for the fabrication of strontium (Sr) and silver (Ag) loaded nanotubular structures on titanium surfaces. A relevant aspect of this work is the demonstration of long-lasting and controllable Ag release, leading to excellent antibacterial and anti-adherent properties against methicillin-resistant Staphylococcus aureus (MRSA), and Gram-negative bacteria such as Escherichia coli. The extended release of Sr accelerates the filling of bone defects by improving the repair of damaged cortical bone and increasing trabecular bone microarchitecture. Our results highlight the potential of Sr and Ag loaded nanotubular structures for use in clinical applications.

Effect of antiresorptive and anabolic bone therapy on development of osteoarthritis in a posttraumatic rat model of OA

Introduction

Osteoarthritis (OA) is a leading cause of disability, but despite the high unmet clinical need and extensive research seeking dependable therapeutic interventions, no proven disease-modifying treatment for OA is currently available. Due to the close interaction and interplay between the articular cartilage and the subchondral bone plate, it has been hypothesized that antiresorptive drugs can also reduce cartilage degradation, inhibit excessive turnover of the subchondral bone plate, prevent osteophyte formation, and/or that bone anabolic drugs might also stimulate cartilage synthesis by chondrocytes and preserve cartilage integrity. The benefit of intensive zoledronate (Zol) and parathyroid hormone (PTH) therapy for bone and cartilage metabolism was evaluated in a rat model of OA.

Methods

Medial meniscectomy (MM) was used to induce OA in male Lewis rats. Therapy with Zol and human PTH was initiated immediately after surgery. A dynamic weight-bearing (DWB) system was deployed to evaluate the weight-bearing capacity of the front and hind legs. At the end of the 10-week study, the rats were euthanized and the cartilage pathology was evaluated by contrast (Hexabrix)-enhanced μCT imaging and traditional histology. Bone tissue was evaluated at the tibial metaphysis and epiphysis, including the subchondral bone. Histological techniques and dynamic histomorphometry were used to evaluate cartilage morphology and bone mineralization.

Results

The results of this study highlight the complex changes in bone metabolism in different bone compartments influenced by local factors, including inflammation, pain and mechanical loads. Surgery caused severe and extensive deterioration of the articular cartilage at the medial tibial plateau, as evidenced by contrast-enhanced μCT and histology. The study results showed the negative impact of MM surgery on the weight-bearing capacity of the operated limb, which was not corrected by treatment. Although both Zol and PTH improved subchondral bone mass and Zol reduced serum CTX-II level, both treatments failed to prevent or correct cartilage deterioration, osteophyte formation and mechanical incapacity.

Conclusions

The various methods utilized in this study showed that aggressive treatment with Zol and PTH did not have the capacity to prevent or correct the deterioration of the hyaline cartilage, thickening of the subchondral bone plate, osteophyte formation or the mechanical incapacity of the osteoarthritic knee.

In vivo small animal micro-CT using nanoparticle contrast agents

Computed tomography (CT) is one of the most valuable modalities for in vivo imaging because it is fast, high-resolution, cost-effective, and non-invasive. Moreover, CT is heavily used not only in the clinic (for both diagnostics and treatment planning) but also in preclinical research as micro-CT. Although CT is inherently effective for lung and bone imaging, soft tissue imaging requires the use of contrast agents. For small animal micro-CT, nanoparticle contrast agents are used in order to avoid rapid renal clearance. A variety of nanoparticles have been used for micro-CT imaging, but the majority of research has focused on the use of iodine-containing nanoparticles and gold nanoparticles. Both nanoparticle types can act as highly effective blood pool contrast agents or can be targeted using a wide variety of targeting mechanisms. CT imaging can be further enhanced by adding spectral capabilities to separate multiple co-injected nanoparticles in vivo. Spectral CT, using both energy-integrating and energy-resolving detectors, has been used with multiple contrast agents to enable functional and molecular imaging. This review focuses on new developments for in vivo small animal micro-CT using novel nanoparticle probes applied in preclinical research.

Vertical Trabeculae are Thinned More Than Horizontal Trabeculae in Skeletal-Unloaded Rats

Skeletal unloading results in a rapid thinning of the trabecular bone network, but it is unknown whether vertical and horizontal trabeculae are equally affected. Therefore, the purpose of the present study was to investigate whether horizontal and vertical trabeculae were thinned similarly during skeletal unloading in rats. Fifty-seven 16-week-old female Wistar rats were randomized into six groups: baseline; control 4 weeks; botulinum toxin A (BTX) 4 weeks; control 8 weeks; BTX 8 weeks; and two BTX injections 8 weeks (BTX + BTX8). The BTX animals were injected in the right hind limb with 4 IU BTX at the start of the study, while the BTX + BTX8 were also injected with 2 IU BTX after 4 weeks. The animals were killed after 0, 4, or 8 weeks. The distal femoral metaphyses were μCT scanned, and the strengths of the femoral necks, mid-diaphyses, and distal femoral metaphyses were ascertained. Disuse resulted in a significant loss of BV/TV, thinning of the trabeculae, and decrease in the degree of anisotropy, and in a significant reduced bone strength after both 4 and 8 weeks. The ratio of horizontal to vertical trabecular thickness (Tb.Th.horz/Tb.Th.vert) and the ratio of horizontal to vertical bone volume (BV.horz/BV.vert) were significantly higher in BTX animals than in control animals. In addition, the horizontal and vertical trabecular thickness probability density functions were more similar in BTX animals than in control animals. In conclusion, skeletal unloading decreased BV/TV, Tb.Th, the degree of anisotropy, and mechanical strength, while BV.horz/BV.vert and Tb.Th.horz/Tb.Th.vert were increased. This indicates that the more loaded vertical trabeculae are pronouncedly more thinned than the less loaded supporting horizontal trabeculae during unloading.

Assessment of the Impact of Zoledronic Acid on Ovariectomized Osteoporosis Model Using Micro-CT Scanning

Purpose/Objective

Prompted by preliminary findings, this study was conducted to investigate the impact of zoledronic acid on the cancellous bone microstructure and its effect on the level of β-catenin in a mouse model of postmenopausal osteoporosis.

Methods and Materials

96 8-week-old specific-pathogen-free C57BL/6 mice were randomly divided into 4 groups (24 per group): a sham group, an ovariectomized osteoporosis model group, an estradiol-treated group, and a zoledronic acid-treated group. Five months after surgery, the third lumbar vertebra and left femur of the animals were dissected and scanned using micro-computed tomography (micro-CT) to acquire three-dimensional imagery of their cancellous bone microstructure. The impact of ovariectomy, the effect of estradiol, and the effect of zoledronic acid intervention on cancellous bone microstructure, as well as on the expression of β-catenin, were evaluated.

Results

The estradiol-treated and the zoledronic acid-treated group exhibited a significant increase in the bone volume fraction, trabecular number, trabecular thickness, bone surface to bone volume ratio (BS/BV), and β-catenin expression, when compared with those of the control group (P <0.01). In contrast, the structure model index, trabecular separation, and BS/BV were significantly lower compared with those of the model group (P <0.01). No differences were observed in the above parameters between animals of the zoledronic acid-treated and the estradiol-treated group.

Conclusion

These results suggest that increased β-catenin expression may be the mechanism underlying zoledronic acid-related improvement in the cancellous bone microstructure in ovariectomized mice. Our findings provide a scientific rationale for using zoledronic acid as a therapeutic intervention to prevent bone loss in post-menopausal women.