A portable array biosensor for detecting multiple analytes in complex samples

SARS-CoV-2-on-Chip for Long COVID Management

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has become a "wicked evil" in this century due to its extended progression and huge human mortalities. Although the diagnosis of SARS-CoV-2 viral infection is made simple and practical by employing reverse transcription polymerase chain reaction (RT-PCR) investigation, the process is costly, complex, time-consuming, and requires experts for testing and the constraints of a laboratory. Therefore, these challenges have raised the paradigm of on-site portable biosensors on a single chip, which reduces human resources and enables remote access to minimize the overwhelming burden on the existing global healthcare sector. This article reviews the recent advancements in biosensors for long coronavirus disease (COVID) management using a multitude of devices, such as point-of-care biosensors and lab-on-chip biosensors. Furthermore, it details the shift in the paradigm of SARS-CoV-2-on-chip biosensors from the laboratory to on-site detection with intelligent and economical operation, representing near-future diagnostic technologies for public health emergency management.

Multiplex Biosensing for Simultaneous Detection of Mutations in SARS-CoV-2

COVID-19 pandemic caused by the severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) has become the world's largest public health emergency of the past few decades. Thousands of mutations were identified in the SARS-CoV-2 genome. Some mutants are more infectious and may replace the original strains. Recently, B.1.1.7(Alpha), B1.351(Beta), and B.1.617.2(Delta) strains, which appear to have increased transmissibility, were detected. These strains accounting for the high proportion of newly diagnosed cases spread rapidly over the world. Particularly, the Delta variant has been reported to account for a vast majority of the infections in several countries over the last few weeks. The application of biosensors in the detection of SARS-CoV-2 is important for the control of the COVID-19 pandemic. Due to high demand for SARS-CoV-2 genotyping, it is urgent to develop reliable and efficient systems based on integrated multiple biosensor technology for rapid detection of multiple SARS-CoV-2 mutations simultaneously. This is important not only for the detection and analysis of the current but also for future mutations. Novel biosensors combined with other technologies can be used for the reliable and effective detection of SARS-CoV-2 mutants.

Biosensor for the detection of Listeria monocytogenes: emerging trends

The early detection of Listeria monocytogenes (L. monocytogenes) and understanding the disease burden is of paramount interest. The failure to detect pathogenic bacteria in the food industry may have terrible consequences, and poses deleterious effects on human health. Therefore, integration of methods to detect and trace the route of pathogens along the entire food supply network might facilitate elucidation of the main contamination sources. Recent research interest has been oriented towards the development of rapid and affordable pathogen detection tools/techniques. An innovative and new approach like biosensors has been quite promising in revealing the foodborne pathogens. In spite of the existing knowledge, advanced research is still needed to substantiate the expeditious nature and sensitivity of biosensors for rapid and in situ analysis of foodborne pathogens. This review summarizes recent developments in optical, piezoelectric, cell-based, and electrochemical biosensors for Listeria sp. detection in clinical diagnostics, food analysis, and environmental monitoring, and also lists their drawbacks and advantages.

Improving the Sensitivity and Functionality of Mobile Webcam-Based Fluorescence Detectors for Point-of-Care Diagnostics in Global Health

Resource-poor countries and regions require effective, low-cost diagnostic devices for accurate identification and diagnosis of health conditions. Optical detection technologies used for many types of biological and clinical analysis can play a significant role in addressing this need, but must be sufficiently affordable and portable for use in global health settings. Most current clinical optical imaging technologies are accurate and sensitive, but also expensive and difficult to adapt for use in these settings. These challenges can be mitigated by taking advantage of affordable consumer electronics mobile devices such as webcams, mobile phones, charge-coupled device (CCD) cameras, lasers, and LEDs. Low-cost, portable multi-wavelength fluorescence plate readers have been developed for many applications including detection of microbial toxins such as C. Botulinum A neurotoxin, Shiga toxin, and S. aureus enterotoxin B (SEB), and flow cytometry has been used to detect very low cell concentrations. However, the relatively low sensitivities of these devices limit their clinical utility. We have developed several approaches to improve their sensitivity presented here for webcam based fluorescence detectors, including (1) image stacking to improve signal-to-noise ratios; (2) lasers to enable fluorescence excitation for flow cytometry; and (3) streak imaging to capture the trajectory of a single cell, enabling imaging sensors with high noise levels to detect rare cell events. These approaches can also help to overcome some of the limitations of other low-cost optical detection technologies such as CCD or phone-based detectors (like high noise levels or low sensitivities), and provide for their use in low-cost medical diagnostics in resource-poor settings.

Recent advances in bioprinting and applications for biosensing

Future biosensing applications will require high performance, including real-time monitoring of physiological events, incorporation of biosensors into feedback-based devices, detection of toxins, and advanced diagnostics. Such functionality will necessitate biosensors with increased sensitivity, specificity, and throughput, as well as the ability to simultaneously detect multiple analytes. While these demands have yet to be fully realized, recent advances in biofabrication may allow sensors to achieve the high spatial sensitivity required, and bring us closer to achieving devices with these capabilities. To this end, we review recent advances in biofabrication techniques that may enable cutting-edge biosensors. In particular, we focus on bioprinting techniques (e.g., microcontact printing, inkjet printing, and laser direct-write) that may prove pivotal to biosensor fabrication and scaling. Recent biosensors have employed these fabrication techniques with success, and further development may enable higher performance, including multiplexing multiple analytes or cell types within a single biosensor. We also review recent advances in 3D bioprinting, and explore their potential to create biosensors with live cells encapsulated in 3D microenvironments. Such advances in biofabrication will expand biosensor utility and availability, with impact realized in many interdisciplinary fields, as well as in the clinic.

Approach to visualization of and optical sensing by Bloch surface waves in noble or base metal-based plasmonic photonic crystal slabs

The Bloch surface wave resonance (SWR) was visualized with the aid of plasmon absorption in a dielectric/metal/dielectric sandwich terminating a one-dimensional photonic crystal (PhC). An SWR peak in calculated spectra of such a plasmonic photonic crystal (PPhC) slab comprising a noble or base metal layer was demonstrated to be sensitive to a negligible variation of refractive index of a medium adjoining to the slab. The considered structure of PPhC slabs can be of practical importance because the metal layer is protected by a capping dielectric layer from contact with analytes and, consequently, from deterioration. We found that, in case of PPhC slabs, gold (the key element of the surface plasmon resonance-based biosensors) can be replaced by other metals. The PPhC-based sensors can be low-cost, reusable, and robust sensors having a sensitivity surpassing that of the known optical sensors.

Next revolution in the molecular theranostics of infectious diseases: microfabricated systems for personalized medicine

The molecular diagnosis of infectious diseases is currently going through a revolution sustained by the regulatory approval of amplification tests that have been shown to be equivalent or superior to existing gold standard methods. The recent approval of a microarray system for the pharmacogenomic profiling of cytochrome P450-mediated drug metabolism is paving the way to novel, rapid, sensitive, robust and economical microfabricated systems for point-of-care diagnostics, which are utilized closer and closer to the patient's bedside. These systems will enable the multiparametric genetic evaluation of several medical conditions, including infectious diseases. This forecoming revolution will position molecular theranostics in a broader integrated view of personalized medicine, which exploits genetic information from microbes and human hosts to optimize patient management and disease treatment.

Capillary Array Waveguide Amplified Fluorescence Detector for mHealth

Mobile Health (mHealth) analytical technologies are potentially useful for carrying out modern medical diagnostics in resource-poor settings. Effective mHealth devices for underserved populations need to be simple, low cost, and portable. Although cell phone cameras have been used for biodetection, their sensitivity is a limiting factor because currently it is too low to be effective for many mHealth applications, which depend on detection of weak fluorescent signals. To improve the sensitivity of portable phones, a capillary tube array was developed to amplify fluorescence signals using their waveguide properties. An array configured with 36 capillary tubes was demonstrated to have a ~100X increase in sensitivity, lowering the limit of detection (LOD) of mobile phones from 1000 nM to 10 nM for fluorescein. To confirm that the amplification was due to waveguide behavior, we coated the external surfaces of the capillaries with silver. The silver coating interfered with the waveguide behavior and diminished the fluorescence signal, thereby proving that the waveguide behavior was the main mechanism for enhancing optical sensitivity. The optical configuration described here is novel in several ways. First, the use of capillaries waveguide properties to improve detection of weak florescence signal is new. Second we describe here a three dimensional illumination system, while conventional angular laser waveguide illumination is spot (or line), which is functionally one-dimensional illumination, can illuminate only a single capillary or a single column (when a line generator is used) of capillaries and thus inherently limits the multiplexing capability of detection. The planar illumination demonstrated in this work enables illumination of a two dimensional capillary array (e.g. x columns and y rows of capillaries). In addition, the waveguide light propagation via the capillary wall provides a third dimension for illumination along the axis of the capillaries. Such an array can potentially be used for sensitive analysis of multiple fluorescent detection assays simultaneously. The simple phone based capillary array approach presented in this paper is capable of amplifying weak fluorescent signals thereby improving the sensitivity of optical detectors based on mobile phones. This may allow sensitive biological assays to be measured with low sensitivity detectors and may make mHealth practical for many diagnostics applications, especially in resource-poor and global health settings.

Optical biosensors for food quality and safety assurance-a review

Food quality and safety is a scientific discipline describing handling, preparation and storage of food in ways that prevent food borne illness. Food serves as a growth medium for microorganisms that can be pathogenic or cause food spoilage. Therefore, it is imperative to have stringent laws and standards for the preparation, packaging and transportation of food. The conventional methods for detection of food contamination based on culturing, colony counting, chromatography and immunoassay are tedious and time consuming while biosensors have overcome some of these disadvantages. There is growing interest in biosensors due to high specificity, convenience and quick response. Optical biosensors show greater potential for the detection of pathogens, pesticide and drug residues, hygiene monitoring, heavy metals and other toxic substances in the food to check whether it is safe for consumption or not. This review focuses on optical biosensors, the recent developments in the associated instrumentation with emphasis on fiber optic and surface plasmon resonance (SPR) based biosensors for detecting a range of analytes in food samples, the major advantages and challenges associated with optical biosensors. It also briefly covers the different methods employed for the immobilization of bio-molecules used in developing biosensors.

A bioanalytical platform for simultaneous detection and quantification of biological toxins

Prevalent incidents support the notion that toxins, produced by bacteria, fungi, plants or animals are increasingly responsible for food poisoning or intoxication. Owing to their high toxicity some toxins are also regarded as potential biological warfare agents. Accordingly, control, detection and neutralization of toxic substances are a considerable economic burden to food safety, health care and military biodefense. The present contribution describes a new versatile instrument and related procedures for array-based simultaneous detection of bacterial and plant toxins using a bioanalytical platform which combines the specificity of covalently immobilized capture probes with a dedicated instrumentation and immuno-based microarray analytics. The bioanalytical platform consists of a microstructured polymer slide serving both as support of printed arrays and as incubation chamber. The platform further includes an easy-to-operate instrument for simultaneous slide processing at selectable assay temperature. Cy5 coupled streptavidin is used as unifying fluorescent tracer. Fluorescence image analysis and signal quantitation allow determination of the toxin's identity and concentration. The system's performance has been investigated by immunological detection of Botulinum Neurotoxin type A (BoNT/A), Staphylococcal enterotoxin B (SEB), and the plant toxin ricin. Toxins were detectable at levels as low as 0.5-1 ng · mL(-1) in buffer or in raw milk.

SOLID3: a multiplex antibody microarray-based optical sensor instrument for in situ life detection in planetary exploration

The search for unequivocal signs of life on other planetary bodies is one of the major challenges for astrobiology. The failure to detect organic molecules on the surface of Mars by measuring volatile compounds after sample heating, together with the new knowledge of martian soil chemistry, has prompted the astrobiological community to develop new methods and technologies. Based on protein microarray technology, we have designed and built a series of instruments called SOLID (for "Signs Of LIfe Detector") for automatic in situ detection and identification of substances or analytes from liquid and solid samples (soil, sediments, or powder). Here, we present the SOLID3 instrument, which is able to perform both sandwich and competitive immunoassays and consists of two separate functional units: a Sample Preparation Unit (SPU) for 10 different extractions by ultrasonication and a Sample Analysis Unit (SAU) for fluorescent immunoassays. The SAU consists of five different flow cells, with an antibody microarray in each one (2000 spots). It is also equipped with an exclusive optical package and a charge-coupled device (CCD) for fluorescent detection. We demonstrated the performance of SOLID3 in the detection of a broad range of molecular-sized compounds, which range from peptides and proteins to whole cells and spores, with sensitivities at 1-2 ppb (ng mL⁻¹) for biomolecules and 10⁴ to 10³ spores per milliliter. We report its application in the detection of acidophilic microorganisms in the Río Tinto Mars analogue and report the absence of substantial negative effects on the immunoassay in the presence of 50 mM perchlorate (20 times higher than that found at the Phoenix landing site). Our SOLID instrument concept is an excellent option with which to detect biomolecules because it avoids the high-temperature treatments that may destroy organic matter in the presence of martian oxidants.

Use of a novel micro-fluidic device to create arrays for multiplex analysis of large and small molecular weight compounds by surface plasmon resonance

There is an increasing demand to develop biosensor monitoring devices capable of biomarker profiling for predicting animal adulteration and detecting multiple chemical contaminants or toxins in food produce. Surface plasmon resonance (SPR) biosensors are label free detection systems that monitor the binding of specific biomolecular recognition elements with binding partners. Essential to this technology are the production of biochips where a selected binding partner, antibody, biomarker protein or low molecular weight contaminant, is immobilised. A micro-fluidic immobilisation device allowing the covalent attachment of up to 16 binding partners in a linear array on a single surface has been developed for compatibility with a prototype multiplex SPR analyser. The immobilisation unit and multiplex SPR analyser were respectively evaluated in their ability to be fit-for-purpose for binding partner attachment and detection of high and low molecular weight molecules. The multiplexing capability of the dual technology was assessed using phycotoxin concentration analysis as a model system. The parent compounds of four toxin groups were immobilised within a single chip format and calibration curves were achieved. The chip design and SPR technology allowed the compartmentalisation of the binding interactions for each toxin group offering the added benefit of being able to distinguish between toxin families and perform concentration analysis. This model is particularly contemporary with the current drive to replace biological methods for phycotoxin screening.

Simultaneous detection of five biothreat agents in powder samples by a multiplexed suspension array

A suspension array-based multiplexed immunoassay was developed for rapid, sensitive, specific, and simultaneous detection of multiple biothreat-associated agents in powder samples. The 5-plexed immunoassays using sets of 9-plexed coupled fluorescent beads were employed to simultaneously detect five representative biothreat agents, including B. anthracis spore, Y. pestis, SARS-CoV, staphylococcal enterotoxin B (SEB) and ricin from a single powder sample and the feasibility for field samples was demonstrated by both blinded and standard laboratory trials. The detection sensitivity and dynamic range for the five biothreat agents from different powders might be varied depending on the nature of the powder and the feature of the contaminating agent. The limit of detection for Y. pestis, B. anthracis spores, SEB, ricin, SARS-CoV N protein in milk powder was 20 cfu, 111 cfu, 110pg, 5.4 ng and 2 ng per test respectively. Compared to conventional ELISA method, the suspension array has a higher sensitive ability, and can detect five biothreat agents simultaneously with high reproducibility.

Development of antiricin single domain antibodies toward detection and therapeutic reagents

Single domain antibodies (sdAb) that bind ricin with high affinity and specificity were selected from a phage display library derived from the mRNA of heavy chain antibodies obtained from lymphocytes of immunized llamas. The sdAb were found to recognize three distinct epitopes on ricin. Representative sdAb were demonstrated to function as both capture and tracer elements in fluid array immunoassays, a limit of detection of 1.6 ng/mL was obtained. One sdAb pair in particular was found to be highly specific for ricin. While polyclonal antibodies cross react strongly with RCA120, the sdAb pair had minimal cross reactivity. In addition, the binders were found to be thermal stable, regaining their ricin binding activity following heating to 85 degrees C for an hour. Cycles of thermally induced unfolding of the sdAb and their subsequent refolding upon cooling was monitored by circular dichroism. As several of the sdAb were observed to bind to ricin's A chain, cell free translation assays were performed to monitor the ability of the sdAbs to inhibit ricin's biological activity. One of the sdAb (C8) was particularly effective and blocked ricin's biological activity with an effectiveness equal to that of a mouse antiricin antibody. These results indicate that antiricin sdAb have great potential for both diagnostic and therapeutic applications.

Ricin detection using phage displayed single domain antibodies

Phage-displayed single domain antibodies (sdAb) were compared to monomeric solubly expressed sdAb and llama polyclonal antibodies for the detection of ricin. SdAb are comprised of the variable domain derived from camelid heavy chain only antibodies (HcAb). Although HcAb lack variable light chains, they as well as their derivative sdAb are able to bind antigens with high affinity. The small size of sdAb (∼16 kDa), while advantageous in many respects, limits the number of labels that can be incorporated. The ability to incorporate multiple labels is a beneficial attribute for reporter elements. Opportunely, sdAb are often selected using phage display methodology. Using sdAb displayed on bacteriophage M13 as the reporter element gives the potential for incorporating a very high number of labels. We have demonstrated the use of both sdAb and phage- displayed sdAb for the detection of ricin using both enzyme linked immunosorbent assays (ELISAs) and Luminex fluid array assays. The phage-displayed sdAb led to five to ten fold better detection of ricin in both the ELISA and Luminex assays, resulting in limits of detection of 1 ng/mL and 64 pg/mL respectively. The phage-displayed sdAb were also dramatically more effective for the visualization of binding to target in nitrocellulose dot blot assays, a method frequently used for epitope mapping.

Fluoroimmunoassays using the NRL array biosensor

Array-based biosensor technology offers the user the ability to detect and quantify multiple targets in multiple samples simultaneously (Analytical Sciences 23:5-10, 2007). The NRL Array Biosensor has been developed with the aim of creating a system for sensitive, rapid, on-site screening for multiple targets of interest. This system is fluorescence-based, using evanescent illumination of a waveguide, and has demonstrated the use of both sandwich and competitive immunoassays for the detection of both high and low molecular weight targets, respectively. The current portable, automated system has demonstrated detection of a wide variety of analytes ranging from simple chemical compounds to entire bacterial cells, with applications in food safety, disease diagnosis, homeland security and environmental monitoring.

A 200-antibody microarray biochip for environmental monitoring: searching for universal microbial biomarkers through immunoprofiling

Environmental biomonitoring approaches require the measurement of either unequivocal biomarkers or specific biological profiles. Antibody microarrays constitute new tools for fast and reliable analysis of up to hundreds of biomarkers simultaneously. Herein we report 150 new polyclonal antibodies against microbial strains and environmental extracts, as well as the construction and validation of an antibody microarray (EMCHIP200, for "Environmental Monitoring Chip") containing 200 different antibodies. Each antibody was tested against its antigen for its specificity and cross-reactivity by a sandwich microarray immunoassay. The limit of detection was 0.2 ng mL (-1) for some proteins and 10 (4)-10 (5) cells mL (-1) for bacterial cells and spores. Partial biochemical characterization allowed identification of polymeric compounds (proteins and polysaccharides) as some of the targets recognized by the antibodies. We have successfully used the EMCHIP200 for the detection of biological polymers in samples from extreme environments around the world (e.g., a deep South African mine, Antarctica's dry valleys, Yellowstone National Park, Iceland, and Rio Tinto surface and subsurface). Clustering analysis permitted us to associate similar immunoprofiles or patterns to samples from apparently very different environments, indicating that they indeed share similar universal biomarkers. Our EMCHIP200 constitutes a new generation of immunosensors for biomarker detection and profiling, for either environmental, industrial, biotechnological, or astrobiological applications.

Rapid ultrafiltration concentration and biosensor detection of enterococci from large volumes of Florida recreational water

Monitoring recreational waters for fecal contamination by standard methodologies involves culturing indicator bacteria, such as fecal coliforms and enterococci. Delayed reporting of microbial water quality parameters increases the likelihood of public exposure to pathogens of fecal origin, making the development of rapid methods important for public health protection. A rapid assay for enterococci was developed using a combined ultrafiltration-biosensor procedure. Twelve 100-liter water samples were collected from upper Tampa Bay over a 9-month period. The samples were collected on site by dead-end hollow-fiber ultrafiltration. Postfiltration processing of the initial retentates included sonication and micrometer-level sieve passage to remove interfering particles. Centrifugation was utilized for secondary concentration. Grab samples were collected simultaneously with the ultrafiltered samples. Concentrations of enterococci in all grab and ultrafiltration samples were determined by the standard method (EPA method 1600) for calculation of recovery efficiencies and concentration factors. Levels of enterococci increased twofold in initial retentates and by 4 orders of magnitude in final retentates over ambient concentrations. An aliquot of each final retentate was adsorbed onto polystyrene waveguides for immunoassay analysis of enterococci with a microfluidic fiber optic biosensor, the Raptor. Enterococci were detected when concentrations in the ambient water exceeded the regulatory standard for a single sample (> or =105 CFU/100 ml). The combined ultrafiltration-biosensor procedure required 2.5 h for detection compared to 24 for the standard method. This study demonstrated that enterococci can be detected rapidly using on-site ultrafiltration, secondary concentration, and biosensor analysis.

Combining self-assembled monolayers and mass spectrometry for applications in biochips

Biochip arrays have enabled the massively parallel analysis of genomic DNA and hold great promise for application to the analysis of proteins, carbohydrates, and small molecules. Surface chemistry plays an intrinsic role in the preparation and analysis of biochips by providing functional groups for immobilization of ligands, providing an environment that maintains activity of the immobilized molecules, controlling nonspecific interactions of analytes with the surface, and enabling detection methods. This review describes recent advances in surface chemistry that enable quantitative assays of a broad range of biochemical activities. The discussion emphasizes the use of self-assembled monolayers of alkanethiolates on gold as a structurally well-defined and synthetically flexible platform for controlling the immobilization and activity of molecules in an array. The review also surveys recent methods of performing label-free assays, and emphasizes the use of matrix-assisted laser desorption/ionization mass spectrometry to directly observe molecules attached to the self-assembled monolayers.

Biosensors and bio-based methods for the separation and detection of foodborne pathogens

The safety of our food supply is always a major concern to consumers, food producers, and regulatory agencies. A safer food supply improves consumer confidence and brings economic stability. The safety of foods from farm-to-fork through the supply chain continuum must be established to protect consumers from debilitating, sometimes fatal episodes of pathogen outbreaks. The implementation of preventive strategies like hazard analysis critical control points (HACCP) assures safety but its full utility will not be realized unless supportive tools are fully developed. Rapid, sensitive, and accurate detection methods are such essential tools that, when integrated with HACCP, will improve safety of products. Traditional microbiological methods are powerful, error-proof, and dependable but these lengthy, cumbersome methods are often ineffective because they are not compatible with the speed at which the products are manufactured and the short shelf life of products. Automation in detection methods is highly desirable, but is not achievable with traditional methods. Therefore, biosensor-based tools offer the most promising solutions and address some of the modern-day needs for fast and sensitive detection of pathogens in real time or near real time. The application of several biosensor tools belonging to the categories of optical, electrochemical, and mass-based tools for detection of foodborne pathogens is reviewed in this chapter. Ironically, geometric growth in biosensor technology is fueled by the imminent threat of bioterrorism through food, water, and air and by the funding through various governmental agencies.

A hand-held surface plasmon resonance biosensor for the detection of ricin and other biological agents

There is an ongoing need for field-deployable biosensor devices. We have constructed a fully self-contained, hand-held biosensor, based on the surface plasmon resonance technique. The dimensions of the sensor unit are 15 x 8 cm, the weight is 600 g and it is powered by a 9 V battery. We have characterised the responsiveness of the sensor using calibrated sucrose solutions and were able to measure changes as small as 3.3 x 10(-6) refractive index units. To demonstrate functionality of the sensor, we have prepared surfaces with an antibody fragment specific for the biological toxin ricin. We were able to detect ricin at 200 ng/mL in 10 min, which is approximately 2500 times less than the minimum lethal dose. We were also able to verify positive binding within a second 10 min window. This sensor demonstrates important steps required for the development of fully integrated, hand-held sensor devices and will form the basis of a multi-analyte system, to be developed in the near future. It also represents the first completely hand-held SPR device, not requiring external power or a computer connection to operate.

Recognition and capture of breast cancer cells using an antibody-based platform in a microelectromechanical systems device

Cancer is one of the most common diseases afflicting humans. The use of biomarkers specific for tumor cells has facilitated their identification. However, technology has not kept pace with the field of molecular biomarkers, leaving their potential unrealized. Here, we demonstrate the efficacy of recognizing and capturing cancer cells using an antibody-based, on-chip, microfluidic device. A cancer cell capture biochip consisting of microchannels of size 2.0 cm long and 500 microm wide and deep, was etched onto Polydimethylsiloxane. Epithelial membrane antigen (EMA) and Epithelial growth factor receptor (EGFR) were coated on the inner surface of the microchannels. The overall chip measured 2.0 cm x 1.5 cm x 0.5 cm. Normal and tumor breast cells in a phosphate buffered saline (PBS) suspension were flowed through the biochip channels at a rate of 15 microL/min. Breast cancer cells were preferentially captured and identified while most of normal cells passed through. The capture rates for tumor and normal cells were found to be >30% and <5%, respectively. This preliminary cancer cell capture biochip design supports our initial effort of moving a BioMEMS device, from the bench top to the clinic.

Concentration gradient immunoassay. 2. Computational modeling for analysis and optimization

A novel microfluidic surface-based competition immunoassay, termed the concentration gradient immunoassay (described in detail in a companion paper (Nelson, K.; Foley, J.; Yager, P. Anal. Chem. 2007, 79, 3542-3548.) uses surface plasmon resonance (SPR) imaging to rapidly measure the concentration of small molecules. To conduct this assay, antibody and analyte are introduced into the two inlets of a T-sensor (Weigl, B. H.; Yager, P. Science 1999, 283, 346-347. Kamholz, A. E.; Weigl, B. H.; Finlayson, B. A.; Yager, P. Anal. Chem. 1999, 71, 5340-5347). Several millimeters downstream, antibody molecules with open binding sites can bind to a surface functionalized with immobilized antigen. This space- and time-dependent binding can be sensitively observed using SPR imaging. In this paper, we describe a complex three-dimensional finite element model developed to better understand the dynamic processes occurring with this assay. The model shows strong qualitative agreement with experimental results for small-molecule detection. The model confirms the experimental finding that the position within the microchannel at which the antibody binds to the immobilized analyte may be used to quantify the concentration of analyte in the sample. In addition, the model was used to explore the sensitivity of assay performance to parameters such as antibody and analyte concentrations, thereby giving insight into ways to optimize analysis speed and accuracy. Given the experimental verification of the computational results, this model serves as an efficient method to explore the influence of the flow rate, microchannel dimensions, and antibody concentration on the sensitivity of the assay.

Prevention of nonspecific bacterial cell adhesion in immunoassays by use of cranberry juice

The ability of Vaccinum macrocarpon, the North American cranberry, to prevent bacterial adhesion has been used to advantage in the prevention of urinary tract infections and has recently been described for the prevention of adhesion of bacteria responsible for oral infections and stomach ulcers. This report documents the ability of cranberry juice to reduce nonspecific adhesion of bacteria to the borosilicate glass microscope slides used in an immunoarray biosensor format. Nonspecific binding of analytes in the array sensor leads to high background signals that cause increased detection limits and false positives. Reduction in background-to-signal ratios can be seen as the juice concentration is increased from 0 to 50% of the sample. This impact cannot be duplicated with grape, orange, apple, or white cranberry juice. Sugar content and pH have been eliminated as the agents in the juice responsible for the anti-adhesive activity.

Detection of Escherichia coli O157, Salmonella enterica serovar Typhimurium, and staphylococcal enterotoxin B in a single sample using enzymatic bio-nanotransduction

Enzymatic bio-nanotransduction is a biological detection scheme based on the production of nucleic acid nano-signals (RNA) in response to specific biological recognition events. In this study, we applied an enzymatic bio-nanotransduction system to the detection of important food-related pathogens and a toxin. Escherichia coli O157:H7, Salmonella enterica serovar Typhimurium, and staphylococcal enterotoxin B (SEB) were chosen because of the implications of these targets to food safety. Primary antibodies to each of the targets were used to functionalize magnetic beads and produce biological recognition elements (antibodies) conjugated to nano-signal-producing DNA templates. Immunomagnetic capture that was followed by in vitro transcription of DNA templates bound to target molecules produced RNA nano-signals specific for every target in the sample. Discrimination of RNA nano-signals with a standard enzyme-linked oligonucleotide fluorescence assay provided a correlation between nano-signal profiles and target concentrations. The estimated limit of detection was 2.4 x 10(3) CFU/ml for E. coli O157:H7, 1.9 X 10(4) CFU/ml for S. enterica serovar Typhimurium, and 0.11 ng/ml for SEB with multianalyte detection in buffer. Low levels of one target were also detected in the presence of interference from high levels of the other targets. Finally, targets were detected in milk, and detection was improved for E. coli 0157 by heat treatment of the milk.

Combination of immunosensor detection with viability testing and confirmation using the polymerase chain reaction and culture

Rapid and accurate differential determination of viable versus nonviable microbes is critical for formulation of an appropriate response after pathogen detection. Sensors for rapid bacterial identification can be used for applications ranging from environmental monitoring and homeland defense to food process monitoring, but few provide viability information. This study combines the rapid screening capability of the array biosensor using an immunoassay format with methods for determination of viability. Additionally, cells captured by the immobilized antibodies can be cultured following fluorescence imaging to further confirm viability and for cell population expansion for further characterization, e.g., strain identification or antibiotic susceptibility testing. Finally, we demonstrate analysis of captured bacteria using the polymerase chain reaction (PCR). PCR results for waveguide-captured cells were 3 orders of magnitude more sensitive than the fluorescence immunoassay and can also provide additional genetic information on the captured microbes. These approaches can be used to rapidly detect and distinguish viable versus nonviable and pathogenic versus nonpathogenic captured organisms, provide culture materials for further analysis on a shorter time scale, and assess the efficacy of decontamination or sterilization procedures.

The array biosensor: portable, automated systems

With recent advances in surface chemistry, microfluidics, and data analysis, there are ever increasing reports of array-based methods for detecting and quantifying multiple targets. However, only a few systems have been described that require minimal preparation of complex samples and possess a means of quantitatively assessing matrix effects. The NRL Array Biosensor has been developed with the goal of rapid and sensitive detection of multiple targets from multiple samples analyzed simultaneously. A key characteristic of this system is its two-dimensional configuration, which allows controls and standards to be analyzed in parallel with unknowns. Although the majority of our work has focused on instrument automation and immunoassay development, we have recently initiated efforts to utilize alternative recognition molecules, such as peptides and sugars, for detection of a wider variety of targets. The array biosensor has demonstrated utility for a variety of applications, including food safety, disease diagnosis, monitoring immune response, and homeland security, and is presently being transitioned to the commercial sector for manufacturing.

Facile generation of heat-stable antiviral and antitoxin single domain antibodies from a semisynthetic llama library

Llamas possess a class of unconventional immunoglobulins that have only heavy chains; unpaired heavy variable domains are responsible for antigen binding. These domains have previously been cloned and expressed as single domain antibodies (sdAbs); they comprise the smallest known antigen binding fragments. SdAbs have been shown to bind antigens at >90 degrees C and to refold after being denatured. To take advantage of the remarkable properties of sdAbs, we constructed a large, semisynthetic llama sdAb library. This library facilitated the rapid selection of binders to an array of biothreat targets. We selected sdAb specific for live vaccinia virus (a smallpox virus surrogate), hen egg lysozyme, cholera toxin, ricin, and staphylococcal enterotoxin B. The selected sdAb possessed high specificity as well as enhanced thermal stability in comparison to conventional IgG and scFv antibodies. We also determined equilibrium dissociation constants as well as demonstrated the use of several antitoxin sdAbs as effective capture and reporter molecules in sandwich assays on the Luminex instrument. The ability to rapidly select such rugged antibodies will enhance the reliability of immunoassays by extending shelf life and the capacity to function in hostile environments.

Quantitative and simultaneous detection of four foodborne bacterial pathogens with a multi-channel SPR sensor

We report the quantitative and simultaneous detection of four species of bacteria, Escherichia coli O157:H7, Salmonella choleraesuis serotype typhimurium, Listeria monocytogenes, and Campylobacter jejuni, using an eight-channel surface plasmon resonance (SPR) sensor based on wavelength division multiplexing. Detection curves showing SPR response versus analyte concentration were established for each species of bacteria in buffer at pH 7.4, apple juice at native pH 3.7, and apple juice at an adjusted pH of 7.4, as well as for a mixture containing all four species of bacteria in buffer. Control experiments were performed to show the non-fouling characteristics of the sensor surface as well as the specificity of the amplification antibodies used in this study. The limit of detection (LOD) for each of the four species of bacteria in the tested matrices ranges from 3.4 x 10(3) to 1.2 x 10(5) cfu/ml. Detection curves in buffer of an individual species of bacteria in a mixture of all four species of bacteria correlated well with detection curves of the individual species of bacteria alone. SPR responses were higher for bacteria in apple juice at pH 7.4 than in apple juice at pH 3.7. This difference in sensor response could be partly attributed to the pH dependence of antibody-antigen binding.

Trends in detection of warfare agents. Detection methods for ricin, staphylococcal enterotoxin B and T-2 toxin

An overview of the different detection methods available for ricin, staphylococcal enterotoxin B (SEB) and T-2 toxin is presented here. These toxins are potential biological warfare agents (BWA). The aim of this review is not to cover all the papers that had been published but rather to give an overall picture of the trend in the detection methodologies for potential biological warfare agents as we do see the emerging threats from these three toxins. The advantages and disadvantages of each methodology as well as the detection limit will be reviewed. It seems that mass spectrometry has created a niche for analysis of proteinaceous toxins, ricin and SEB as well as molecular toxin, T-2 toxin given its high sensitivity, high selectivity, high specificity and capability to identify and quantify unknown agents simultaneously in a short time frame. But its main drawbacks are its sophisticated instrumentation and its high cost. Improvised immunoassay may be an alternative.

Indirect competitive immunoassay for detection of aflatoxin B1 in corn and nut products using the array biosensor

Because of the potential health risks of aflatoxin B1 (AFB1), it is essential to monitor the level of this mycotoxin in a variety of foods. An indirect competitive immunoassay has been developed using the NRL array biosensor, offering rapid, sensitive detection and quantification of AFB1 in buffer, corn and nut products. AFB1-spiked foods were extracted with methanol and Cy5-anti-AFB1 added to the resulting sample. The extracted sample/antibody mix was passed over a waveguide surface patterned with immobilized AFB1. The resulting fluorescence signal decreased as the concentration of AFB1 in the sample increased. The limit of detection for AFB1 in buffer, 0.3 ng/ml, was found to increase to between 1.5 and 5.1 ng/g and 0.6 and 1.4 ng/g when measured in various corn and nut products, respectively.

Simultaneous detection of Escherichia coli O157∶H7 and Salmonella Typhimurium using quantum dots as fluorescence labels

In this study, we explored the use of semiconductor quantum dots (QDs) as fluorescence labels in immunoassays for simultaneous detection of two species of foodborne pathogenic bacteria, Escherichia coli O157:H7 and Salmonella Typhimurium. QDs with different sizes can be excited with a single wavelength of light, resulting in different emission peaks that can be measured simultaneously. Highly fluorescent semiconductor quantum dots with different emission wavelengths (525 nm and 705 nm) were conjugated to anti-E. coli O157 and anti-Salmonella antibodies, respectively. Target bacteria were separated from samples by using specific antibody coated magnetic beads. The bead-cell complexes reacted with QD-antibody conjugates to form bead-cell-QD complexes. Fluorescent microscopic images of QD labeled E. coli and Salmonella cells demonstrated that QD-antibody conjugates could evenly and completely attach to the surface of bacterial cells, indicating that the conjugated QD molecules still retain their effective fluorescence, while the conjugated antibody molecules remain active and are able to recognize their specific target bacteria in a complex mixture. The intensities of fluorescence emission peaks at 525 nm and 705 nm of the final complexes were measured for quantitative detection of E. coli O157:H7 and S. Typhimurium simultaneously. The fluorescence intensity (FI) as a function of cell number (N) was found for Salmonella and E. coli, respectively. The regression models can be expressed as: FI = 60.6 log N- 250.9 with R(2) = 0.97 for S. Typhimurium, and FI = 77.8 log N- 245.2 with R(2) = 0.91 for E. coli O157:H7 in the range of cell numbers from 10(4) to 10(7) cfu ml(-1). The detection limit of this method was 10(4) cfu ml(-1). The detection could be completed within 2 hours. The principle of this method could be extended to detect multiple species of bacteria (3-4 species) simultaneously, depending on the availability of each type of QD-antibody conjugates with a unique emission peak and the antibody coated magnetic beads specific to each species of bacteria.

Current and developing technologies for monitoring agents of bioterrorism and biowarfare

Recent events have made public health officials acutely aware of the importance of rapidly and accurately detecting acts of bioterrorism. Because bioterrorism is difficult to predict or prevent, reliable platforms to rapidly detect and identify biothreat agents are important to minimize the spread of these agents and to protect the public health. These platforms must not only be sensitive and specific, but must also be able to accurately detect a variety of pathogens, including modified or previously uncharacterized agents, directly from complex sample matrices. Various commercial tests utilizing biochemical, immunological, nucleic acid, and bioluminescence procedures are currently available to identify biological threat agents. Newer tests have also been developed to identify such agents using aptamers, biochips, evanescent wave biosensors, cantilevers, living cells, and other innovative technologies. This review describes these current and developing technologies and considers challenges to rapid, accurate detection of biothreat agents. Although there is no ideal platform, many of these technologies have proved invaluable for the detection and identification of biothreat agents.

A “do-it-yourself” array biosensor

We have developed an array biosensor for the simultaneous detection of multiple targets in multiple samples within 15-30 min. The biosensor is based on a planar waveguide, a modified microscope slide, with a pattern of small (mm2) sensing regions. The waveguide is illuminated by launching the emission of a 635 nm diode laser into the proximal end of the slide via a line generator. The evanescent field excites fluorophores bound in the sensing region and the emitted fluorescence is measured using a Peltier-cooled CCD camera. Assays can be performed on the waveguide in multichannel flow chambers and then interrogated using the detection system described here. This biosensor can detect many different targets, including proteins, toxins, cells, virus, and explosives with detection limits rivaling those of the ELISA detection system.

Antimicrobial Peptides for Detection of Bacteria in Biosensor Assays

Bacteria, plants, and higher and lower animals have evolved an innate immune system as a first line of defense against microbial invasion. Some of these organisms produce antimicrobial peptides (AMPs) as a part of this chemical immune system. AMPs exert their antimicrobial activity by binding to components of the microbe's surface and disrupting the membrane. The overall goal of this study was to apply the AMP magainin I as a recognition element for Escherichia coli O157:H7 and Salmonella typhimurium detection on an array-based biosensor. We immobilized magainin I on silanized glass slides using biotin-avidin chemistry, as well as through direct covalent attachment. Cy5-labeled, heat-killed cells were used to demonstrate that the immobilized magainin I can bind Salmonella with detection limits similar to analogous antibody-based assays. Detection limits for E. coli were higher than in analogous antibody-based assays, but it is expected that other AMPs may possess higher affinities for this target. The results showed that both specific and nonspecific binding strongly depend on the method used for peptide immobilization. Direct attachment of magainin to the substrate surface not only decreased nonspecific cell binding but also resulted in improved detection limits for both Salmonella and E. coli.

Evanescent wave fluorescence biosensors

Since discovery and first use in the mid-1970s, evanescent wave fluorescence biosensors have developed into a diverse range of instruments, each designed to meet a particular detection need. In this review, we provide a brief synopsis of what evanescent wave fluorescence biosensors are, how they work, and how they are used. In addition, we have summarized the important patents that have impacted the evolution from laboratory curiosities to fully automated commercial products. Finally, we address the critical issues that evanescent wave fluorescence biosensors will face in the coming years.

Multiplex diagnostic platforms for detection of biothreat agents

The availability of rapid, sensitive and cost-effective diagnostic methods is paramount to the success of a comprehensive national health security system in the USA. The national networks that were established to safeguard US infrastructures (e.g., public health, livestock, agriculture and water supply) have developed sufficient capability and capacity for monitoring. However, additional advanced methods will be required to maintain operational readiness. Currently available methods, although sensitive and specific, are generally costly and not amenable to high-throughput analyses. Critical to the success of biothreat surveillance is the ability to screen for and detect multiple agents rapidly in a single reaction and with minimal sample processing. This review will examine currently available diagnostic platforms (i.e., PCR-, immuno- and array-based) and biosensors that can detect multiple biothreat analytes in a single reaction (i.e., multiplex assays). The maturity, benefits and limitations of each platform will be described and a prospective view, from current to future state of the art, will be proposed.

Methods for the isolation and identification of Listeria spp. and Listeria monocytogenes: a review

Listeria monocytogenes is an important food-borne pathogen and is widely tested for in food, environmental and clinical samples. Identification traditionally involved culture methods based on selective enrichment and plating followed by the characterization of Listeria spp. based on colony morphology, sugar fermentation and haemolytic properties. These methods are the gold standard; but they are lengthy and may not be suitable for testing of foods with short shelf lives. As a result more rapid tests were developed based on antibodies (ELISA) or molecular techniques (PCR or DNA hybridization). While these tests possess equal sensitivity, they are rapid and allow testing to be completed within 48 h. More recently, molecular methods were developed that target RNA rather than DNA, such as RT-PCR, real time PCR or nucleic acid based sequence amplification (NASBA). These tests not only provide a measure of cell viability but they can also be used for quantitative analysis. In addition, a variety of tests are available for sub-species characterization, which are particularly useful in epidemiological investigations. Early typing methods differentiated isolates based on phenotypic markers, such as multilocus enzyme electrophoresis, phage typing and serotyping. These phenotypic typing methods are being replaced by molecular tests, which reflect genetic relationships between isolates and are more accurate. These new methods are currently mainly used in research but their considerable potential for routine testing in the future cannot be overlooked.