Chaotic mixer improves microarray hybridization

Development of a clinical microarray system for genetic analysis screening

Objectives

Research on the relationship between diseases and genes and the advancement of genetic analysis technologies have made genetic testing in medical care possible. There are various methods for genetic testing, including PCR-based methods and next-generation sequencing; however, screening tests in clinical laboratories are becoming more diverse; therefore, novel measurement systems and equipment are required to meet the needs of each situation. In this study, we aimed to develop a novel microarray-based genetic analysis system that uses a Peltier element to overcome the issues of conventional microarrays, such as the long measurement time and high cost.

Methods

We constructed a microarray system to detect the UDP-glucuronosyltransferase gene polymorphisms UGT1A1*6 and UGT1A1*28 in patients eligible for irinotecan hydrochloride treatment for use in clinical laboratories. To evaluate the performance of the system, the hybridization temperature and reaction time were determined, and the results were compared with those obtained using a conventional hybridization oven.

Results

The hybridization temperature reached its target in 1/27th of the time required by the conventional system. We assessed 111 human clinical samples and found that our results agreed with those obtained using existing methods. The total time for the newly developed device was reduced by 85 min compared to that for existing methods, as the automated DNA microarray eliminates the time that existing methods spend on manual operation.

Conclusions

The surface treatment technology used in our system enables high-density and strong DNA fixation, allowing the construction of a measurement system suitable for clinical applications.

Dynamic Magnetic Nanomixers for Improved Microarray Assays by Eliminating Diffusion Limitation

Microarrays are widely used in high-throughput analysis of DNA, protein, and small molecules. However, the majority of microarray assays need improved assay speed and sensitivity due to the slow molecular diffusion from bulk solutions to probe surfaces. Here, a new class of magnetic nanomixers in DNA and protein microarray assays is reported to eliminate the diffusion constraint through dynamic mixing. It is demonstrated that the dynamic nanomixers can improve the assay kinetics at least by a factor of 4 and 2 for DNA and protein microarray assays, respectively. By using the dynamic nanomixers, the sensitivities of detecting Escherichia coli O157:H7 DNA and prostate specific antigen increase by more than four-fold. The dynamic mixing also greatly reduces the spot-to-spot variation to below 10% across a broad concentration range, providing more accurate assay results. In comparison with existing methods, this magnetic nanomixer-based approach offers rapid turnaround, improved sensitivity, good accuracy, low cost, simple operation, and excellent compatibility with commercial microarrays.

Individually Controllable Magnetic Cilia: Mixing Application

This paper introduces a new design for individually controlled magnetic artificial cilia for use in fluid devices and specifically intended to improve the mixing in DNA microarray experiments. The design has been implemented using a low-cost prototype that can be fabricated using polydimethylsiloxane (PDMS) and off-the-shelf parts and achieves large cilium deflections (59% of the cilium length). The device's performance is measured via a series of mixing experiments using different actuation patterns inspired by the blinking vortex theory. The experimental results, quantified using the relative standard deviation of the color when mixing two colored inks, show that exploiting the individual control leads to faster mixing (38% reduction in mixing time) than when operating the device in a simultaneous-actuation mode with the same average cilium beat frequency. Furthermore, the experimental results show an optimal beating pattern that minimizes the mixing time. The existence and character of this optimum is predicted by simulations using a blinking-vortex approach for 2D ideal flow, suggesting that the blinking-vortex model can be used to predict the effect of parameter variation on the experimental system.

Express photolithographic DNA microarray synthesis with optimized chemistry and high-efficiency photolabile groups

Background

DNA microarrays are a core element of modern genomics research and medical diagnostics, allowing the simple and simultaneous determination of the relative abundances of hundreds of thousands to millions of genomic DNA or RNA sequences in a sample. Photolithographic in situ synthesis, using light projection from a digitally-controlled array of micromirrors, has been successful at both commercial and laboratory scales. The advantages of this synthesis method are its ability to reliably produce high-quality custom microarrays with a very high spatial density of DNA features using a compact device with few moving parts. The phosphoramidite chemistry used in photolithographic synthesis is similar to that used in conventional solid-phase synthesis of oligonucleotides, but some unique differences require an independent optimization of the synthesis chemistry to achieve fast and low-cost synthesis without compromising microarray quality.

Results

High microarray quality could be maintained while reducing coupling time to a few seconds using DCI activator. Five coupling activators were compared, which resulted in microarray hybridization signals following the order ETT > Activator 42 > DCI ≫ BTT ≫ pyridinium chloride, but only the use of DCI led to both high signal and highly uniform feature intensities. The photodeprotection time was also reduced to a few seconds by replacing the NPPOC photolabile group with the new thiophenyl-NPPOC group. Other chemical parameters, such as oxidation and washing steps were also optimized.

Conclusions

Highly optimized and microarray-specific phosphoramidite chemistry, along with the use of the very photosensitive thiophenyl-NPPOC protecting group allow for the synthesis of high-complexity DNA arrays using coupling times of 15 s and deprotection times of 9 s. The resulting overall cycle time (coupling to coupling) of about 50 s, results in a three-fold reduction in synthesis time.

Increasing hybridization rate and sensitivity of DNA microarrays using isotachophoresis

We present an on-chip electrokinetic method to increase the reaction kinetics and sensitivity of DNA microarray hybridization. We use isotachophoresis (ITP) to preconcentrate target molecules in solution and transport them over the immobilized probe sites of a microarray, greatly increasing the binding reaction rate. We show theoretically and experimentally that ITP-enhanced microarrays can be hybridized much faster and with higher sensitivity than conventional methods. We demonstrate our assay using a microfluidic system consisting of a PDMS microchannel superstructure bonded onto a glass slide on which 60 spots of 20-27 nt ssDNA oligonucleotide probes are immobilized. Our 30 min assay results in an 8.2 fold higher signal than the conventional overnight hybridization at 100 fM target concentration. We show rapid and quantitative detection over 4 orders of magnitude dynamic range of target concentration with no increase in the nonspecific signal. Our technique can be further multiplexed for higher density microarrays and extended for other reactions of target-surface immobilized ligands.

Advances in miniaturized instruments for genomics

In recent years, a lot of demonstrations of the miniaturized instruments were reported for genomic applications. They provided the advantages of miniaturization, automation, sensitivity, and specificity for the development of point-of-care diagnostics. The aim of this paper is to report on recent developments on miniaturized instruments for genomic applications. Based on the mature development of microfabrication, microfluidic systems have been demonstrated for various genomic detections. Since one of the objectives of miniaturized instruments is for the development of point-of-care device, impedimetric detection is found to be a promising technique for this purpose. An in-depth discussion of the impedimetric circuits and systems will be included to provide total consideration of the miniaturized instruments and their potential application towards real-time portable imaging in the “-omics” era. The current excellent demonstrations suggest a solid foundation for the development of practical and widespread point-of-care genomic diagnostic devices.

Biosensing enhancement using passive mixing structures for microarray-based sensors

The combination of microarray technologies with microfluidic sample delivery and real-time detection methods has the capability to simultaneously monitor 10-1000 s of biomolecular interactions in a single experiment. Despite the benefits that microfluidic systems provide, they typically operate in the laminar flow regime under mass transfer limitations, where large analyte depletion layers act as a resistance to analyte capture. By locally stirring the fluid and delivering fresh analyte to the capture spot, the use of passive mixing structures in a microarray environment can reduce the negative effects of these depletion layers and enhance the sensor performance. Despite their large potential, little attention has been given to the integration of these mixing structures in microarray sensing environments. In this study, we use passive mixing structures to enhance the mass transfer of analyte to a capture spot within a microfluidic flow cell. Using numerical methods, different structure shapes and heights were evaluated as means to increase local fluid velocities, and in turn, rates of mass transfer to a capture spot. These results were verified experimentally via the real-time detection of 20-mer ssDNA for an array of microspots. Both numerical and experimental results showed that a passive mixing structure situated directly over the capture spot can significantly enhance the binding rate of analyte to the sensing surface. Moreover, we show that these structures can be used to enhance mass transfer in experiments regarding an array of capture spots. The results of this study can be applied to any experimental system using microfluidic sample delivery methods for microarray detection techniques.

Rate of chaotic mixing and boundary behavior

We discuss rigorous results on the rate of mixing for an idealized model of a class of fluid mixing device. These show that the decay of correlations of a scalar field is governed by the presence of boundaries in the domain, and in particular by the behavior of the modeled fluid at such boundaries.

Microfluidic transport in microdevices for rare cell capture

The isolation and capture of rare cells is a problem uniquely suited to microfluidic devices, in which geometries on the cellular length scale can be engineered and a wide range of chemical functionalizations can be implemented. The performance of such devices is primarily affected by the chemical interaction between the cell and the capture surface and the mechanics of cell-surface collision and adhesion. As rare cell-capture technology has been summarized elsewhere (E. D. Pratt et al., Chem. Eng. Sci. 2011, 66, 1508-1522), this article focuses on the fundamental adhesion and transport mechanisms in rare cell-capture microdevices, and explores modern device design strategies in a transport context. The biorheology and engineering parameters of cell adhesion are defined; adhesion models and reaction kinetics briefly reviewed. Transport at the microscale, including diffusion and steric interactions that result in cell motion across streamlines, is discussed. The review concludes by discussing design strategies with a focus on leveraging the underlying transport phenomena to maximize device performance.

Transport phenomena in chaotic laminar flows

In many important chemical processes, the laminar flow regime is inescapable and defines the performance of reactors, separators, and analytical instruments. In the emerging field of microchemical process or lab-on-a-chip, this constraint is particularly rigid. Here, we review developments in the use of chaotic laminar flows to improve common transport processes in this regime. We focus on four: mixing, interfacial transfer, axial dispersion, and spatial sampling. Our coverage demonstrates the potential for chaos to improve these processes if implemented appropriately. Throughout, we emphasize the usefulness of familiar theoretical models of transport for processes occurring in chaotic flows. Finally, we point out open challenges and opportunities in the field.

Rapid microarray processing using a disposable hybridization chamber with an integrated micropump

We present a disposable microarray hybridization chamber with an integrated micropump to speed up diffusion based reaction kinetics by generating convective flow. The time-to-result for the hybridization reaction was reduced from 60 min (standard protocol) down to 15 min for a commercially available microarray. The integrated displacement micropump is pneumatically actuated. It includes two active microvalves and is designed for low-cost, high volume manufacturing. The setup is made out of two microstructured polymer parts realized in polycarbonate (PC) separated by a 25 μm thermoplastic elastomer (TPE) membrane. Pump rate can be controlled between 0.3 μl s(-1) and 5.7 μl s(-1) at actuation frequencies between 0.2 Hz and 8.0 Hz, respectively.

Enhancement of DNA hybridization under acoustic streaming with three-piezoelectric-transducer system

Recently, we have demonstrated that DNA hybridization using acoustic streaming induced by two piezoelectric transducers provides higher DNA hybridization efficiency than the conventional method. In this work, we refine acoustic streaming system for DNA hybridization by inserting an additional piezoelectric transducer and redesigning the locations of the transducers. The Comsol® Multiphysics was used to design and simulate the velocity field generated by the piezoelectric agitation. The simulated velocity vector followed a spiral vortex flow field with an average direction outward from the center of the transducers. These vortices caused the lower signal intensity in the middle of the microarray for the two-piezoelectric disk design. On the contrary, the problem almost disappeared in the three-piezoelectric-disk system. The optimum condition for controlling the piezoelectric was obtained from the dye experiments with different activation settings for the transducers. The best setting was to activate the side disks and middle disk alternatively with 1 second activating time and 3 second non-activating time for both sets of transducers. DNA hybridization using microarrays for the malaria parasite Plasmodium falciparum from the optimized process yielded a three-fold enhancement of the signal compared to the conventional method. Moreover, a greater number of spots passed quality control in the optimized device, which could greatly improve biological interpretation of DNA hybridization data.

Efficiency, error and yield in light-directed maskless synthesis of DNA microarrays

Background

Light-directed in situ synthesis of DNA microarrays using computer-controlled projection from a digital micromirror device--maskless array synthesis (MAS)--has proved to be successful at both commercial and laboratory scales. The chemical synthetic cycle in MAS is quite similar to that of conventional solid-phase synthesis of oligonucleotides, but the complexity of microarrays and unique synthesis kinetics on the glass substrate require a careful tuning of parameters and unique modifications to the synthesis cycle to obtain optimal deprotection and phosphoramidite coupling. In addition, unintended deprotection due to scattering and diffraction introduce insertion errors that contribute significantly to the overall error rate.

Results

Stepwise phosphoramidite coupling yields have been greatly improved and are now comparable to those obtained in solid phase synthesis of oligonucleotides. Extended chemical exposure in the synthesis of complex, long oligonucleotide arrays result in lower--but still high--final average yields which approach 99%. The new synthesis chemistry includes elimination of the standard oxidation until the final step, and improved coupling and light deprotection. Coupling Insertions due to stray light are the limiting factor in sequence quality for oligonucleotide synthesis for gene assembly. Diffraction and local flare are by far the largest contributors to loss of optical contrast.

Conclusions

Maskless array synthesis is an efficient and versatile method for synthesizing high density arrays of long oligonucleotides for hybridization- and other molecular binding-based experiments. For applications requiring high sequence purity, such as gene assembly, diffraction and flare remain significant obstacles, but can be significantly reduced with straightforward experimental strategies.

HistoFlex--a microfluidic device providing uniform flow conditions enabling highly sensitive, reproducible and quantitative in situ hybridizations

A microfluidic device (the HistoFlex) designed to perform and monitor molecular biological assays under dynamic flow conditions on microscope slide-substrates, with special emphasis on analyzing histological tissue sections, is presented. Microscope slides were reversibly sealed onto a cast polydimethylsiloxane (PDMS) insert, patterned with distribution channels and reaction chambers. Topology optimization was used to design reaction chambers with uniform flow conditions. The HistoFlex provided uniform hybridization conditions, across the reaction chamber, as determined by hybridization to microscope slides of spotted DNA microarrays when applying probe concentrations generally used in in situ hybridization (ISH) assays. The HistoFlex's novel ability in online monitoring of an in situ hybridization assay was demonstrated using direct fluorescent detection of hybridization to 18S rRNA. Tissue sections were not visually damaged during assaying, which enabled adapting a complete ISH assay for detection of microRNAs (miRNA). The effects of flow based incubations on hybridization, antibody incubation and Tyramide Signal Amplification (TSA) steps were investigated upon adapting the ISH assay for performing in the HistoFlex. The hybridization step was significantly enhanced using flow based incubations due to improved hybridization efficiency. The HistoFlex device enabled a fast miRNA ISH assay (3 hours) which provided higher hybridization signal intensity compared to using conventional techniques (5 h 40 min). We further demonstrate that the improved hybridization efficiency using the HistoFlex permits more complex assays e.g. those comprising sequential hybridization and detection of two miRNAs to be performed with significantly increased sensitivity. The HistoFlex provides a new histological analysis platform that will allow multiple and sequential assays to be performed under their individual optimum assay conditions. Images can subsequently be recorded either in combination or sequentially through the ability of the HistoFlex to monitor assays without disassembly.

Systematic spatial bias in DNA microarray hybridization is caused by probe spot position-dependent variability in lateral diffusion

BACKGROUND

The hybridization of nucleic acid targets with surface-immobilized probes is a widely used assay for the parallel detection of multiple targets in medical and biological research. Despite its widespread application, DNA microarray technology still suffers from several biases and lack of reproducibility, stemming in part from an incomplete understanding of the processes governing surface hybridization. In particular, non-random spatial variations within individual microarray hybridizations are often observed, but the mechanisms underpinning this positional bias remain incompletely explained.

METHODOLOGY/PRINCIPAL FINDINGS

This study identifies and rationalizes a systematic spatial bias in the intensity of surface hybridization, characterized by markedly increased signal intensity of spots located at the boundaries of the spotted areas of the microarray slide. Combining observations from a simplified single-probe block array format with predictions from a mathematical model, the mechanism responsible for this bias is found to be a position-dependent variation in lateral diffusion of target molecules. Numerical simulations reveal a strong influence of microarray well geometry on the spatial bias.

CONCLUSIONS

Reciprocal adjustment of the size of the microarray hybridization chamber to the area of surface-bound probes is a simple and effective measure to minimize or eliminate the diffusion-based bias, resulting in increased uniformity and accuracy of quantitative DNA microarray hybridization.

DNA hybridization enhancement using piezoelectric microagitation through a liquid coupling medium

In conventional DNA microarray hybridization, delivery of target cDNAs to surface-bounded probes depends solely on diffusion, which is notoriously slow, and thus typically requires 6-20 h to complete. In this study, piezoelectric microagitation through a liquid coupling medium is employed to enhance DNA hybridization efficiency and the results are compared with the standard static hybridization method. DNA hybridization was performed in a sealed aluminium chamber containing DNA microarray glass chip, coupling medium and piezoelectric transducers. 3×SSC (Saline Sodium Citrate) was used as a coupling medium to prevent overheating of the piezoelectric transducers and to effectively transmit ultrasonic wave to the glass chip. Flow visualization using fluidic dye and velocimetry (PTV) technique was applied to observe fluid transport in the hybridization chamber. It was revealed that the dye solution was homogeneously distributed within 10 min under dynamic agitation while it took over 1 h to reach the same level of homogeneity in static condition. Plasmodium falciparum DNA microarrays and total RNA extracted from parasite cells were used as a model for DNA microarray experiments. It was found that the required hybridization time may be substantially reduced from 16 h to 4 h by the use of dynamic hybridization scheme. With the same hybridization time of 16 h, dynamic hybridization resulted in higher fluorescent signals of ∼33% and ∼24% compared to static hybridization in Cy3 and Cy5 channels, respectively. Additionally, good/effective spots, some of which were not formed by static method, were enhanced and distributed more uniformly over the microarray. Therefore, the developed dynamic hybridization with integrated piezoelectric microagitation platform is highly promising for DNA analysis in molecular biology and medical applications.

Effect of co-axially hybridized gene targets on hybridization efficiency of microarrayed DNA probes

The effect of relative size of two co-axially hybridized gene targets on the hybridization efficiency was studied for two DNA probe configurations and various probe concentrations. Each of two sets of microarrayed probes contained a pair of DNA probes and a pair of their complementary samples labeled with two distinct fluorescent dyes. The sequence of each probe is especially designed so that two targets are simultaneously complementary to two adjacent sections of the probe. The molecular steric effect on the hybridization efficiency is investigated by comparing the dye signals between configurations of one-target and two-target hybridization scenarios. The results show that a low probe concentration gives better hybridization efficiency and the first-hybridization conducted by a shorter-size DNA target improves the hybridization efficiency of the second target coupling onto the same probe.

Microfluidic DNA microarray analysis: a review

Microarray DNA hybridization techniques have been used widely from basic to applied molecular biology research. Generally, in a DNA microarray, different probe DNA molecules are immobilized on a solid support in groups and form an array of microspots. Then, hybridization to the microarray can be performed by applying sample DNA solutions in either the bulk or the microfluidic manner. Because the immobilized probe DNA binds and retains its complementary target DNA, detection is achieved through the read-out of the tagged markers on the sample target molecules. The recent microfluidic hybridization method shows the advantages of less sample usage and reduced incubation time. Here, sample solutions are confined in microfabricated channels and flow through the probe microarray area. The high surface-to-volume ratio in microchannels of nanolitre volume greatly enhanced the sensitivity as obtained with the bulk solution method. To generate nanolitre flows, different techniques have been developed, and this including electrokinetic control, vacuum suction and syringe pumping. The latter two are pressure-driven methods which are more flexible without the need of considering the physicochemical properties of solutions. Recently, centrifugal force is employed to drive liquid movement in microchannels. This method utilizes the body force from the liquid itself and there are no additional solution interface contacts such as from electrodes or syringes and tubing. Centrifugal force driven flow also features the ease of parallel hybridizations. In this review, we will summarize the recent advances in microfluidic microarray hybridization and compare the applications of various flow methods.

Enhancement of target-DNA hybridization efficiency by pre-hybridization on sequence-orientated micro-arrayed probes

The enhancement of hybridization efficiency of deoxyribonucleic acid (DNA) targets using oligonucleotide pre-hybridization is studied on two sequence-inversed micro-arrayed probes. The sequences for pre-hybridizing both oligo and target DNA are designed to be fully complementary with their shared DNA probe in a coaxial stacking configuration; i.e. they hybridize immediately alongside each other along the continuous complement probe strand. The pre-hybridizing oligo and target DNA are differentiated by being labeled with two distinct fluorescent dyes, and the cooperative effect on hybridization efficiency is investigated through the comparison of the stacking and individual hybridization configurations based on the detection signals of the labeling dyes. The results show that the pre-hybridization of a DNA oligo enhances the subsequent hybridization efficiency of the target-DNA coupling onto the same probe. The efficiency is enhanced if the hybridization position occurs at a site close to the substrate surface.

Experimental and model investigation of the time-dependent 2-dimensional distribution of binding in a herringbone microchannel

A microfluidic device known to mix bulk solutions, the herringbone microchannel, was incorporated into a surface-binding assay to determine if the recirculation of solution altered the binding of a model protein (streptavidin) to the surface. Streptavidin solutions were pumped over surfaces functionalized with its ligand, biotin, and the binding of streptavidin to those surfaces was monitored using surface plasmon resonance imaging. Surface binding was compared between a straight microchannel and herringbone microchannels in which the chevrons were oriented with and against the flow direction. A 3-dimensional finite-element model of the surface binding reaction was developed for each of the geometries and showed strong qualitative agreement with the experimental results. Experimental and model results indicated that the forward and reverse herringbone microchannels substantially altered the distribution of protein binding (2-dimensional binding profile) as a function of time when compared to a straight microchannel. Over short distances (less than 1.5 mm) down the length of the microchannel, the model predicted no additional protein binding in the herringbone microchannel compared to the straight microchannel, consistent with previous findings in the literature.

Effects of external transport on discrimination between perfect and mismatch duplexes on gel-based oligonucleotide microchips

Using hydrogel-based oligonucleotide microchips developed previously for the choice of drugs during leukemia treatment and the other diseases, it is shown that the acceleration of external transport by mixing buffer solution with peristaltic pump not only enhances the observable fluorescence signals, but also improves significantly the discrimination between perfect and mismatch duplexes at the intermediate stage of hybridization on the oligonucleotide microchips. The discrimination efficiency for a given hybridization time grows monotonously with the frequency of flow pulsations. The mixing with frequency 10 Hz accelerates the hybridization rate approximately thrice and improves the discrimination efficiency 1.5-2.5 times higher for overnight hybridization. To study these effects, we have developed the special peristaltic pump mixing solution in a hybridization chamber of 35 mul in volume (area approximately 1 x 1 cm(2) and height 0.3 mm). We present also the brief theoretical summary for the interpretation and assessment of the observed experimental features.

Saliva-based diagnostics using 16S rRNA microarrays and microfluidics

The development of a diagnostic system based on DNA microarrays for rapid identification and enumeration of microbial species in the oral cavity is described. This system uses gel-based microarrays with immobilized probes designed within a phylogenetic framework that provides for comprehensive microbial monitoring. Understanding the community structure in the oral cavity is a necessary foundation on which to understand the breadth and depth of different microbial communities in the oral cavity and their role in acute and systemic disease. Our ultimate goal is to develop a diagnostic device to identify individuals at high risk for oral disease, and thereby reduce its prevalence and therefore the economic burden associated with treatment. This article discusses recent improvements of our system in reducing diffusional constraints in order to provide more rapid and accurate measurements of the microbial composition of saliva.

Unravelling microbial communities with DNA-microarrays: challenges and future directions

High-throughput technologies are urgently needed for monitoring the formidable biodiversity and functional capabilities of microorganisms in the environment. Ten years ago, DNA microarrays, miniaturized platforms for highly parallel hybridization reactions, found their way into environmental microbiology and raised great expectations among researchers in the field. In this article, we briefly summarize the state-of-the-art of microarray approaches in microbial ecology research and discuss in more detail crucial problems and promising solutions. Finally, we outline scenarios for an innovative combination of microarrays with other molecular tools for structure-function analysis of complex microbial communities.

DNA microarrays: design principles for maximizing ergodic, chaotic mixing

In this article we show that models of flows in DNA microarrays generated by pulsed source-sink pairs can be studied as linked twist maps. The significance of this is that it enables us to relate the flow to mathematically precise notions of chaotic mixing that can be realized through specific design criteria. We apply these techniques to three different mixing protocols, two of which have been previously described in the literature, and we are able to isolate the features of each mixer that lead to "good" or "bad" mixing. Based on this, we propose a new design to generate a "well-mixed" flow in a DNA microarray.

Diffusion limitation: a possible source for the occurrence of doughnut patterns on DNA microarrays

Doughnut shaped hybridization patterns on DNA microarrays are mainly allocated to spotting or drying artifacts. The present study reports on results obtained from four different approaches that when combined generate a better view on the occurrence of these patterns. This study points out that doughnuts are not only formed during the spotting and drying process, but the hybridization process itself can be considered as an important cause. A combination of computer simulations, theoretical, optical, and experimental techniques shows how ring-shaped hybridization patterns occur when diffusion-limited conditions are present during the hybridization process. The theoretical assumptions as well as the simulations indicate that, for the basic geometry of a microarray hybridization experiment, a large amount of binding molecules reach the spot from the sides (and not from above the spot), leading to a preferential binding on the rims of the spot. These patterns seem to occur especially during hybridization with short oligonucleotides that have a very high binding probability and fast hybridization kinetics. Longer target DNA molecules lead to a more evenly distributed intensity signal. Furthermore, the diffusion-limited conditions also lead to pronounced hybridization intensity patterns on the scale of a whole spot block, where larger intensities are obtained on the edges of the block compared with the spots laying in the center of the block.

LAB ON A CD

In this paper, centrifuge-based microfluidic platforms are reviewed and compared with other popular microfluidic propulsion methods. The underlying physical principles of centrifugal pumping in microfluidic systems are presented and the various centrifuge fluidic functions, such as valving, decanting, calibration, mixing, metering, heating, sample splitting, and separation, are introduced. Those fluidic functions have been combined with analytical measurement techniques, such as optical imaging, absorbance, and fluorescence spectroscopy and mass spectrometry, to make the centrifugal platform a powerful solution for medical and clinical diagnostics and high throughput screening (HTS) in drug discovery. Applications of a compact disc (CD)-based centrifuge platform analyzed in this review include two-point calibration of an optode-based ion sensor, an automated immunoassay platform, multiple parallel screening assays, and cellular-based assays. The use of modified commercial CD drives for high-resolution optical imaging is discussed as well. From a broader perspective, we compare technical barriers involved in applying microfluidics for sensing and diagnostic use and applying such techniques to HTS. The latter poses less challenges and explains why HTS products based on a CD fluidic platform are already commercially available, whereas we might have to wait longer to see commercial CD-based diagnostics.

Effect of mixing on reaction–diffusion kinetics for protein hydrogel-based microchips

Protein hydrogel-based microchips are being developed for high-throughput evaluation of the concentrations and activities of various proteins. To shorten the time of analysis, the reaction-diffusion kinetics on gel microchips should be accelerated. Here we present the results of the experimental and theoretical analysis of the reaction-diffusion kinetics enforced by mixing with peristaltic pump. The experiments were carried out on gel-based protein microchips with immobilized antibodies under the conditions utilized for on-chip immunoassay. The dependence of fluorescence signals at saturation and corresponding saturation times on the concentrations of immobilized antibodies and antigen in solution proved to be in good agreement with theoretical predictions. It is shown that the enhancement of transport with peristaltic pump results in more than five-fold acceleration of binding kinetics. Our results suggest useful criteria for the optimal conditions for assays on gel microchips to balance high sensitivity and rapid fluorescence saturation kinetics.

Microfluidic Device for Rapid (<15 min) Automated Microarray Hybridization

Background: Current hybridization protocols on microarrays are slow and need skilled personnel. Microfluidics is an emerging science that enables the processing of minute volumes of liquids to perform chemical, biochemical, or enzymatic analyzes. The merging of microfluidics and microarray technologies constitutes an elegant solution that will automate and speed up microarray hybridization.

Methods: We developed a microfluidic flow cell consisting of a network of chambers and channels molded into a polydimethylsiloxane substrate. The substrate was aligned and reversibly bound to the microarray printed on a standard glass slide to form a functional microfluidic unit. The microfluidic units were placed on an engraved, disc-shaped support fixed on a rotational device. Centrifugal forces drove the sample and buffers directly onto the microarray surface.

Results: This microfluidic system increased the hybridization signal by ∼10fold compared with a passive system that made use of 10 times more sample. By means of a 15–min automated hybridization process, performed at room temperature, we demonstrated the discrimination of 4 clinically relevant Staphylococcus species that differ by as little as a single-nucleotide polymorphism. This process included hybridization, washing, rinsing, and drying steps and did not require any purification of target nucleic acids. This platform was sensitive enough to detect 10 PCR-amplified bacterial genomes.

Conclusion: This removable microfluidic system for performing microarray hybridization on glass slides is promising for molecular diagnostics and gene profiling.

Hydrogel glycan microarrays

The technology of hydrogel microchips manufacturing, which was developed previously for covalent immobilization of DNA and proteins, was applied for the preparation of glycochips and combined glyco/protein chips. Microchips consist of hydrogel drops separated with hydrophobic surface. Spacered amino-saccharides and polyacrylamide glycoconjugates were used for immobilization. Gel elements were approximately 1 nl in volume (150 microm in diameter and 25 microm in height), and the amount of covalently immobilized saccharide in the glycoarray was 0.4-1.7 pmol per gel element. Hydrogel glycan microchips were used for quantitative assay of antibodies against blood group antigens and assay of lectins with fluorescent detection. In all cases, only specific interaction with chip-immobilized saccharides was observed, whereas the background signal was very low. The detection limit of on-chip assays was comparable to that of the standard 96-well plate assays. Mixing of reaction solution allowed us to decrease the duration of the assays significantly: 2-3 h for incubation and development steps and 10 min for washing. A method for determination of association constants for binding of compounds with chip-immobilized ligands from the kinetics of their binding is proposed. Combined microchips containing different types of biomolecules can be designed and used for simultaneous detection of different compounds.

Rational design of a Corynebacterium glutamicum pantothenate production strain and its characterization by metabolic flux analysis and genome-wide transcriptional profiling

A "second-generation" production strain was derived from a Corynebacterium glutamicum pantothenate producer by rational design to assess its potential to synthesize and accumulate the vitamin pantothenate by batch cultivation. The new pantothenate production strain carries a deletion of the ilvA gene to abolish isoleucine synthesis, the promoter down-mutation P-ilvEM3 to attenuate ilvE gene expression and thereby increase ketoisovalerate availability, and two compatible plasmids to overexpress the ilvBNCD genes and duplicated copies of the panBC operon. Production assays in shake flasks revealed that the P-ilvEM3 mutation and the duplication of the panBC operon had cumulative effects on pantothenate production. During pH-regulated batch cultivation, accumulation of 8 mM pantothenate was achieved, which is the highest value reported for C. glutamicum. Metabolic flux analysis during the fermentation demonstrated that the P-ilvEM3 mutation successfully reoriented the carbon flux towards pantothenate biosynthesis. Despite this repartition of the carbon flux, ketoisovalerate not converted to pantothenate was excreted by the cell and dissipated as by-products (ketoisocaproate, DL-2,3,-dihydroxy-isovalerate, ketopantoate, pantoate), which are indicative of saturation of the pantothenate biosynthetic pathway. Genome-wide expression analysis of the production strain during batch cultivation was performed by whole-genome DNA microarray hybridization and agglomerative hierarchical clustering, which detected the enhanced expression of genes involved in leucine biosynthesis, in serine and glycine formation, in regeneration of methylenetetrahydrofolate, in de novo synthesis of nicotinic acid mononucleotide, and in a complete pathway of acyl coenzyme A conversion. Our strategy not only successfully improved pantothenate production by genetically modified C. glutamicum strains but also revealed new constraints in attaining high productivity.

DNA Microarray Enhancement Using a Continuously and Discontinuously Rotating Microchamber

It is demonstrated that the most efficient way to enhance DNA microarray analysis consists of a maximal reduction of the total device volume (to keep the concentration of the available DNA as high as possible), combined with the creation of a strong lateral convective transport of the sample. In the present study, DNA microarray hybridizations are performed in a set of rotating, circular microchambers covering exactly the spotted area of the microarray and with a depth varying between 70 and 1.6 microm. Rotating the microchamber substrate while keeping the microarray stationary, the rotating microchamber bottom wall literally drags the sample past the microarray spots with a velocity which is independent of the fluid layer thickness. Interestingly, it was found that transporting the sample in a discontinuous mode (with stop periods of several minutes) not only yields a more stable and reproducible operation, it also yields significantly larger hybridization intensities (typically a factor of 2-3 larger) than a continuous rotation. This seems to be due to the fact that the velocity field disturbs the binding process at the binding site level. Working under limiting DNA sample mass conditions, the system yielded in a short, 30-min experiment already a 5-fold increase of the hybridization intensity, as compared to a conventional microscope slide/coverslip system operated overnight under diffusion-driven conditions. Compared to a commercial pump-around hybridization system, the gain was even more impressive, precisely due to the fact that the pump-around system requires larger volumes, which with a fixed amount of available genetic material leads to the application of more diluted samples.

Electrokinetically Controlled DNA Hybridization Microfluidic Chip Enabling Rapid Target Analysis

Biosensors and more specifically biochips exploit the interactions between a target analyte and an immobilized biological recognition element to produce a measurable signal. Systems based on surface nucleic acid hybridization, such as microarrays, are particularly attractive due to the high degree of selectivity in the binding interactions. One of the drawbacks of this reaction is the relatively long time required for complete hybridization to occur, which is often the result of diffusion-limited reaction kinetics. In this work, an electrokinetically controlled DNA hybridization microfluidic chip will be introduced. The electrokinetic delivery technique provides the ability to dispense controlled samples of nanoliter volumes directly to the hybridization array (thereby increasing the reaction rate) and rapidly remove nonspecific adsorption, enabling the hybridization, washing, and scanning procedures to be conducted simultaneously. The result is that all processes from sample dispensing to hybridization detection can be completed in as little as 5 min. The chip also demonstrates an efficient hybridization scheme in which the probe saturation level is reached very rapidly as the targets are transported over the immobilized probe site enabling quantitative analysis of the sample concentration. Detection levels as low as 50 pM have been recorded using an epifluorescence microscope.

Exploiting the benefits of miniaturization for the enhancement of DNA microarrays

The present study demonstrates that the best way to enhance DNA microarray assays, both in terms of analysis speed and in final spot intensity, is to dissolve the available molar amount of sample in the smallest possible buffer volume and to subsequently convect this solution continuously across the surface of the array. The presently proposed shear-driven flow system is pre-eminently suited for this task, as it allows to induce strongly enhanced lateral transport rates, independently of the degree of miniaturization of the hybridization chamber. This transport enhancement method, however, only increases the hybridization rate and not the final spot intensity, as neither can any of the other transport enhancement methods already proposed in literature. A series of experiments with synthetic single-stranded (ssDNA) samples and an accompanying mass balance analysis are presented to demonstrate these points.

Designing for chaos: applications of chaotic advection at the microscale

Chaotic advection can play an important role in efficient microfluidic mixers. We discuss a design paradigm that exploits chaotic advection and illustrate by two recent examples, namely enhancing gene expression profiling and constructing an in-line microfluidic mixing channel, how application of this paradigm has led to successful micromixers. We suggest that 'designing for chaos', that is, basing practical mixer design on chaotic advection analysis, is a promising approach to adopt in this developing field which otherwise has little to guide it and is constrained by issues of scale and manufacturability.