Anti-infective and osteointegration properties of silicon nitride, poly(ether ether ketone), and titanium implants

Fabrication and characterization of sodium alginate-silicon nitride-PVA composite biomaterials with damping properties

Silicon nitride is utilized clinically as a bioceramic for spinal fusion cages, owing to its high strength, osteoconductivity, and antibacterial effects. Nevertheless, silicon nitride exhibits suboptimal damping properties, a critical factor in mitigating traumatic bone injuries and fractures. In fact, there is a scarcity of spinal implants that simultaneously demonstrate proficient damping performance and support osteogenesis. In our study, we fabricated a novel sodium alginate-silicon nitride/poly(vinyl alcohol) (SA-SiN/PVA) composite scaffold, enabling enhanced energy absorption and rapid elastic recovery under quasi-static and impact loading scenarios. Furthermore, the study demonstrated that the incorporation of physical and chemical cross-linking significantly improved stiffness and recoverable energy dissipation. Concerning the interaction between cells and materials, our findings suggest that the addition of silicon nitride stimulated osteogenic differentiation while inhibiting Staphylococcus aureus growth. Collectively, the amalgamation of ceramics and tough hydrogels facilitates the development of advanced composites for spinal implants, manifesting superior damping, osteogenic potential, and antibacterial properties. This approach holds broader implications for applications in bone tissue engineering.

Investigation on the Osteogenic and Antibacterial Properties of Silicon Nitride-Coated Titanium Dental Implants

The silicon nitride (Si3N4) coating exhibits promising potential in oral applications due to its excellent osteogenic and antibacterial properties. However, a comprehensive investigation of Si3N4 coatings in the context of dental implants is still lacking, especially regarding their corrosion resistance and in vivo performance. In this study, Si3N4 coatings were prepared on a titanium surface using the nonequilibrium magnetron sputtering method. A systematic comparison among the titanium group (Ti), Si3N4 coating group (Si3N4-Ti), and sandblasted and acid-etched-treated titanium group (SLA-Ti) has been conducted in vitro and in vivo. The results showed that the Si3N4-Ti group had the best corrosion resistance and antibacterial properties, which were mainly attributed to the dense structure and chemical activity of Si-O and Si-N bonds on the surface. Furthermore, the Si3N4-Ti group exhibited superior cellular responses in vitro and new bone regeneration and osseointegration in vivo, respectively. In this sense, silicon nitride coating shows promising prospects in the field of dental implantology.

Near-infrared light responsive gold nanoparticles coating endows polyetheretherketone with enhanced osseointegration and antibacterial properties

Polyetheretherketone (PEEK) is considered as a promising dental implant material owing to its excellent physicochemical and mechanical properties. However, its wide range of applications is limited by its biologically inert nature. In this study, a near-infrared (NIR) light responsive bioactive coating with gold nanoparticles (AuNPs) and metronidazole adhered to the PEEK surface via dopamine polymerization. Compared to pure PEEK, the hydrophilicity of the treated PEEK surface was significantly improved. In addition, under NIR light, the surface coating exhibited photothermal conversion effect, and gold nanoparticles and the antibiotic can be released from the coating. This improved the antibacterial properties of PEEK materials. Moreover, the coating was more conducive to the early adhesion of bone mesenchymal stem cells. The results of in vitro and in vivo osteogenic activity studies showed that the developed coating promoted osseointegration of PEEK implants, and NIR light irradiation further improved the antibacterial ability and osteogenic activity of PEEK implants. Through RNA sequencing, the potential underlying mechanism of promoting bone formation of the AuNPs coating combined metronidazole was interpreted. In summary, the developed coating is a potential surface treatment strategy that endows PEEK with enhanced osseointegration and antibacterial properties.

Studying and Characterization of Coating of Zein-CaSiO3 Composite on Polyetheretherketone Implant Material

Material-coated implants are placed in the bone and play an essential role in bone regeneration and rapid healing around implants. Polymeric matrix reinforced with ceramic materials is a promising composite material for coating implants. This study aims to determine the effect of mixing various concentrations of zein with CaSiO3 on polyetheretherketone (PEEK) as implant material. The coating was performed using the electrospray method. PEEK disks were used as a control group. The coated disks with different concentrations of zein-CaSiO3 (Group 1: 10% wt, 90% wt), (Group 2: 20% wt, 80% wt), and (Group 3%: 30% wt, 70% wt) were the experimental group. Each group was characterized by atomic force microscopy, field emission scanning electron microscope, Fourier-transform infrared spectroscopy, water contact angle, and adhesion strength. The lowest water contact angle was obtained for Group 1: 10% wt and 90% wt were (26.64° and 27.13°, respectively), and increasing amounts of zein in comparison to quantities of CaSiO3 resulted in increased adhesion strength of the composite material to the substrate. The current study suggested that the higher amount of zein compared to the amount of CaSiO3 mixture coating is achieved by electrospraying, a favorable candidate for coating implants compared to uncoated and coated disks with low concentrations of zein compared to concentrations of CaSiO3.

Silicon-containing nanomedicine and biomaterials: materials chemistry, multi-dimensional design, and biomedical application

The invention of silica-based bioactive glass in the late 1960s has sparked significant interest in exploring a wide range of silicon-containing biomaterials from the macroscale to the nanoscale. Over the past few decades, these biomaterials have been extensively explored for their potential in diverse biomedical applications, considering their remarkable bioactivity, excellent biocompatibility, facile surface functionalization, controllable synthesis, etc. However, to expedite the clinical translation and the unexpected utilization of silicon-composed nanomedicine and biomaterials, it is highly desirable to achieve a thorough comprehension of their characteristics and biological effects from an overall perspective. In this review, we provide a comprehensive discussion on the state-of-the-art progress of silicon-composed biomaterials, including their classification, characteristics, fabrication methods, and versatile biomedical applications. Additionally, we highlight the multi-dimensional design of both pure and hybrid silicon-composed nanomedicine and biomaterials and their intrinsic biological effects and interactions with biological systems. Their extensive biomedical applications span from drug delivery and bioimaging to therapeutic interventions and regenerative medicine, showcasing the significance of their rational design and fabrication to meet specific requirements and optimize their theranostic performance. Additionally, we offer insights into the future prospects and potential challenges regarding silicon-composed nanomedicine and biomaterials. By shedding light on these exciting research advances, we aspire to foster further progress in the biomedical field and drive the development of innovative silicon-composed nanomedicine and biomaterials with transformative applications in biomedicine.

A 3D-Printed Assemblable Bespoke Scaffold as a Versatile Microcryogel Carrier for Site-Specific Regenerative Medicine

Advances in additive manufacturing have led to diverse patient-specific implant designs utilizing computed tomography, but this requires intensive work and financial implications. Here, Digital Light Processing is used to fabricate a hive-structured assemblable bespoke scaffold (HIVE). HIVE can be manually assembled in any shape/size with ease, so a surgeon can create a scaffold that will best fit a defect before implantation. Simultaneously, it can have site-specific treatments by working as a carrier filled with microcryogels (MC) incorporating different biological factors in different pockets of HIVE. After characterization, possible site-specific applications are investigated by utilizing HIVE as a versatile carrier with incorporated treatments such as growth factors (GF), bioceramic, or cells. HIVE as a GF-carrier shows a controlled release of bone morphogenetic protein/vascular endothelial growth factor (BMP/VEGF) and induced osteogenesis/angiogenesis from human mesenchymal stem cells (hMSC)/human umbilical vein endothelial cells (HUVECs). Furthermore, as a bioceramic-carrier, HIVE demonstrates enhanced mineralization and osteogenesis, and as a HUVEC carrier, it upregulates both osteogenic and angiogenic gene expression of hMSCs. HIVE with different combinations of MCs yields a distinct local effect and successful cell migration is confirmed within assembled HIVEs. Finally, an in vivo rat subcutaneous implantation demonstrates site-specific osteogenesis and angiogenesis.

X-ray and UV Irradiation-Induced Reactive Oxygen Species Mediated Antibacterial Activity in Fe and Pt Nanoparticle-Decorated Si-Doped TiCaCON Films

Bone implants with biocompatibility and the ability to biomineralize and suppress infection are in high demand. The occurrence of early infections after implant placement often leads to repeated surgical treatment due to the ineffectiveness of antibiotic therapy. Therefore, an extremely attractive solution to this problem would be the ability to initiate bacterial protection of the implant by an external influence. Here, we present a proof-of-concept study based on the generation of reactive oxygen species (ROS) by the implant surface in response to X-ray irradiation, including through a layer of 3 mm adipose tissue, providing bactericidal protection. The effect of UV and X-ray irradiation of the implant surface on the ROS formation and the associated bactericidal activity was compared. The focus of our study was light-sensitive Si-doped TiCaCON films decorated with Fe and Pt nanoparticles (NPs) with photoinduced antibacterial activity mediated by ROS. In the visible and infrared range of 300-1600 nm, the films absorb more than 60% of the incident light. The high light absorption capacity of TiO2/TiC and TiO2/TiN heterostructures was demonstrated by density functional theory calculations. After short-term (5-10 s) low-dose X-ray irradiation, the films generated significantly more ROS than after UV illumination for 1 h. The Fe/TiCaCON-Si films showed enhanced biomineralization capacity, superior cytocompatibility, and excellent antibacterial activity against multidrug-resistant hospital Escherichia coli U20 and K261 strains and methicillin-resistant Staphylococcus aureus MW2 strain. Our study clearly demonstrates that oxidized Fe NPs are a promising alternative to the widely used Ag NPs in antibacterial coatings, and X-rays can potentially be used in ROS-regulating therapy to suppress inflammation in case of postimplant complications.

Recent advances in the application and biological mechanism of silicon nitride osteogenic properties: a review

Silicon nitride, an emerging bioceramic material, is highly sought after in the biomedical industry due to its osteogenesis-promoting properties, which are a result of its unique surface chemistry and excellent mechanical properties. Currently, it is used in clinics as an orthopedic implant material. The osteogenesis-promoting properties of silicon nitride are manifested in its contribution to the formation of a local osteogenic microenvironment, wherein silicon nitride and its hydrolysis products influence osteogenesis by modulating the biological behaviors of the constituents of the osteogenic microenvironment. In particular, silicon nitride regulates redox signaling, cellular autophagy, glycolysis, and bone mineralization in cells involved in bone formation via several mechanisms. Moreover, it may also promote osteogenesis by influencing immune regulation and angiogenesis. In addition, the wettability, surface morphology, and charge of silicon nitride play crucial roles in regulating its osteogenesis-promoting properties. However, as a bioceramic material, the molding process of silicon nitride needs to be optimized, and its osteogenic mechanism must be further investigated. Herein, we summarize the impact of the molding process of silicon nitride on its osteogenic properties and clinical applications. In addition, the mechanisms of silicon nitride in promoting osteogenesis are discussed, followed by a summary of the current gaps in silicon nitride mechanism research. This review, therefore, aims to provide novel ideas for the future development and applications of silicon nitride.

Overview of strategies to improve the antibacterial property of dental implants

The increasing number of peri-implant diseases and the unsatisfactory results of conventional treatment are causing great concern to patients and medical staff. The effective removal of plaque which is one of the key causes of peri-implant disease from the surface of implants has become one of the main problems to be solved urgently in the field of peri-implant disease prevention and treatment. In recent years, with the advancement of materials science and pharmacology, a lot of research has been conducted to enhance the implant antimicrobial properties, including the addition of antimicrobial coatings on the implant surface, the adjustment of implant surface topography, and the development of new implant materials, and significant progress has been made in various aspects. Antimicrobial materials have shown promising applications in the prevention of peri-implant diseases, but meanwhile, there are some shortcomings, which leads to the lack of clinical widespread use of antimicrobial materials. This paper summarizes the research on antimicrobial materials applied to implants in recent years and presents an outlook on the future development.

Silicon Nitride Ceramics: Structure, Synthesis, Properties, and Biomedical Applications

Silicon nitride ceramics excel by superior mechanical, thermal, and chemical properties that render the material suitable for applications in several technologically challenging fields. In addition to high temperature, high stress applications have been implemented in aerospace gas turbines and internal combustion engines as well as in tools for metal manufacturing, forming, and machining. During the past few decades, extensive research has been performed to make silicon nitride suitable for use in a variety of biomedical applications. This contribution discusses the structure-property-application relations of silicon nitride. A comparison with traditional oxide-based ceramics confirms that the advantageous mechanical and biomedical properties of silicon nitride are based on a high proportion of covalent bonds. The present biomedical applications are reviewed here, which include intervertebral spacers, orthopedic and dental implants, antibacterial and antiviral applications, and photonic parts for medical diagnostics.

Surface Modifications of High-Performance Polymer Polyetheretherketone (PEEK) to Improve Its Biological Performance in Dentistry

This comprehensive review focuses on polyetheretherketone (PEEK), a synthetic thermoplastic polymer, for applications in dentistry. As a high-performance polymer, PEEK is intrinsically robust yet biocompatible, making it an ideal substitute for titanium-the current gold standard in dentistry. PEEK, however, is also inert due to its low surface energy and brings challenges when employed in dentistry. Inert PEEK often falls short of achieving a few critical requirements of clinical dental materials, such as adhesiveness, osseoconductivity, antibacterial properties, and resistance to tribocorrosion. This study aims to review these properties and explore the various surface modification strategies that enhance the performance of PEEK. Literatures searches were conducted on Google Scholar, Research Gate, and PubMed databases using PEEK, polyetheretherketone, osseointegration of PEEK, PEEK in dentistry, tribology of PEEK, surface modifications, dental applications, bonding strength, surface topography, adhesive in dentistry, and dental implant as keywords. Literature on the topics of surface modification to increase adhesiveness, tribology, and osseointegration of PEEK were included in the review. The unavailability of full texts was considered when excluding literature. Surface modifications via chemical strategies (such as sulfonation, plasma treatment, UV treatment, surface coating, surface polymerization, etc.) and/or physical approaches (such as sandblasting, laser treatment, accelerated neutral atom beam, layer-by-layer assembly, particle leaching, etc.) discussed in the literature are summarized and compared. Further, approaches such as the incorporation of bioactive materials, e.g., osteogenic agents, antibacterial agents, etc., to enhance the abovementioned desired properties are explored. This review presents surface modification as a critical and essential approach to enhance the biological performance of PEEK in dentistry by retaining its mechanical robustness.

Synthesis of Silicon Nitride Nanoparticles by Upcycling Silicon Wafer Waste Using Thermal Plasma Jets

Silicon (Si) waste generation is a critical issue in the development of semiconductor industries, and significant amounts of Si waste are disposed via landfilling. Herein, we propose an effective and high value-added recycling method for generating nitride nanoparticles from Si waste, such as poor-grade Si wafers, broken wafers, and Si scrap with impurities. Si waste was crushed and used as precursors, and an Ar-N2 thermal plasma jet was applied at 13 kW (300 A) under atmospheric pressure conditions. A cone-type reactor was employed to optimize heat transfer, and Si waste was injected into the high-temperature region between the cathode and anode to react with free/split nitrogen species. Spherical Si3N4 nanoparticles were successfully synthesized using isolated nitrogen plasma in the absence of ammonia gas. The crystalline structure comprised mixed α- and β-Si3N4 phases with the particle size <30 nm. Furthermore, the influence of ammonia gas on nitridation was investigated. Our findings indicated that Si3N4 nanoparticles were successfully synthesized in the absence of ammonia gas, and their crystallinity could be altered based on the reactor geometry. Therefore, the as-proposed thermal plasma technique can be used to successfully synthesize high value-added nanopowder from industrial waste.

Ceramics in total disc replacements: A scoping review

BACKGROUND

Ceramics are used in Total Disc Replacements (1) in articulating surfaces for their wear resistance and biocompatibility and (2) on endplates to promote osseointegration. They furthermore exhibit MRI and CT compatibility. These properties address main challenges associated with non-ceramic Total Disc Replacements i.e. wear, migration and postoperative imaging. While brittleness of ceramics caused fear of fracture in the past, improvements of ceramic materials were made and considerable clinical experience with ceramic Total Disc Replacements was gained. This review aims to assess the evidence on the use of ceramics in Total Disc Replacements and compare safety and effectiveness of ceramic Total Disc Replacements to spinal fusion and Total Disc Replacements in general.

METHODS

We conducted a scoping review on the use of ceramics in Total Disc Replacements using Scopus, Web of Science and PubMed. The review includes 36 clinical, ex vivo and nonhuman in vivo, tribological and mechanical studies and case reports.

FINDINGS

Ceramics are used in cervical Total Disc Replacements, with safety and efficacy confirmed in clinical studies, with up to 10 and 3.3 years follow-up, for articulation and osseointegration applications, respectively. Clinical evidence shows that ceramic Total Disc Replacements (alike non-ceramic ones) restore segmental motion and result in non-inferior and possibly superior outcomes to spinal fusion. In vivo studies show osseointegration comparable to non-ceramic devices. Tribological studies suggest appropriate wear properties.

INTERPRETATION

We found no indications of systematic problems with the use of ceramics in Total Disc Replacements. Ceramics are suitable materials for Total Disc Replacements.

Comparison of Titanium and PEEK Medical Plastic Implant Materials for Their Bacterial Biofilm Formation Properties

This study investigated two of the most commonly used CAD–CAM materials for patient-specific reconstruction in craniomaxillofacial surgery. The aim of this study was to access the biofilm formation of Staphylococcus aureus, Streptococcus mutans, Enterococcus faecalis, and Escherichia coli on titanium and PEEK medical implant materials. Two titanium specimens (titanium grade 2 tooled with a Planmeca CAD–CAM milling device and titanium grade 5 tooled with a computer-aided design direct metal laser sintering device (CAD-DMLS)) and one PEEK specimen tooled with a Planmeca CAD–CAM milling device were studied. Bacterial adhesion on implants was evaluated in two groups (saliva-treated group and non-saliva-treated group) to imitate intraoral and extraoral surgical routes for implant placement. The PEEK medical implant material showed higher bacterial adhesion by S. aureus, S. mutans, and E. coli than titanium grade 2 and titanium grade 5, whereas E. faecalis showed higher adhesion to titanium as compared to PEEK. Saliva contamination of implants also effected bacterial attachment. Salivary coating enhanced biofilm formation by S. aureus, S. mutans, and E. faecalis. In conclusion, our findings imply that regardless of the implant material type or tooling techniques used, salivary coating plays a vital role in bacterial adhesion. In addition, the majority of the bacterial strains showed higher adhesion to PEEK than titanium.

Femtosecond laser optimization of PEEK: efficient bioactivity achieved by synergistic surface chemistry and structures

Poly-ether-ether-ketone (PEEK) is considered a potential orthopedic material due to the excellent mechanical properties and chemical resistance, but its biological inertness hampers its further clinical application. In this study, advanced femtosecond laser microfabrication technology was utilized to induce the change of the surface characteristics of PEEK to improve its bioactivity. Meanwhile, the mechanism of surface reaction and improved bioactivity was interpreted in detail from the perspective of material science. The surface physical-chemical characterization results showed that femtosecond laser etching could increase the surface energy, and the contents of active sites including amorphous carbon and carbon-hydroxyl on PEEK surfaces. In vitro validation experiments demonstrated that the samples etched with a femtosecond laser had a better ability to induce apatite deposition and cell proliferation than those treated with popular sulfonation modification, which would lead to better bioactivity and osteointegration. The current work fully presents the mechanism of the femtosecond laser low-temperature plasma effect on PEEK and the resulting surface characteristics, which could broaden the application of PEEK in the orthopedic field. Moreover, it has great potential in the surface design and modification of other biomaterials with enhanced bioactivity.

Bioactive Silicon Nitride Implant Surfaces with Maintained Antibacterial Properties

Silicon nitride (Si3N4) is a promising biomaterial, currently used in spinal fusion implants. Such implants should result in high vertebral union rates without major complications. However, pseudarthrosis remains an important complication that could lead to a need for implant replacement. Making silicon nitride implants more bioactive could lead to higher fusion rates, and reduce the incidence of pseudarthrosis. In this study, it was hypothesized that creating a highly negatively charged Si3N4 surface would enhance its bioactivity without affecting the antibacterial nature of the material. To this end, samples were thermally, chemically, and thermochemically treated. Apatite formation was examined for a 21-day immersion period as an in-vitro estimate of bioactivity. Staphylococcus aureus bacteria were inoculated on the surface of the samples, and their viability was investigated. It was found that the thermochemically and chemically treated samples exhibited enhanced bioactivity, as demonstrated by the increased spontaneous formation of apatite on their surface. All modified samples showed a reduction in the bacterial population; however, no statistically significant differences were noticed between groups. This study successfully demonstrated a simple method to improve the in vitro bioactivity of Si3N4 implants while maintaining the bacteriostatic properties.

Biodegradable interbody cages for lumbar spine fusion: Current concepts and future directions

Lumbar fusion often remains the last treatment option for various acute and chronic spinal conditions, including infectious and degenerative diseases. Placement of a cage in the intervertebral space has become a routine clinical treatment for spinal fusion surgery to provide sufficient biomechanical stability, which is required to achieve bony ingrowth of the implant. Routinely used cages for clinical application are made of titanium (Ti) or polyetheretherketone (PEEK). Ti has been used since the 1980s; however, its shortcomings, such as impaired radiographical opacity and higher elastic modulus compared to bone, have led to the development of PEEK cages, which are associated with reduced stress shielding as well as no radiographical artefacts. Since PEEK is bioinert, its osteointegration capacity is limited, which in turn enhances fibrotic tissue formation and peri-implant infections. To address shortcomings of both of these biomaterials, interdisciplinary teams have developed biodegradable cages. Rooted in promising preclinical large animal studies, a hollow cylindrical cage (Hydrosorb™) made of 70:30 poly-l-lactide-co-d, l-lactide acid (PLDLLA) was clinically studied. However, reduced bony integration and unfavourable long-term clinical outcomes prohibited its routine clinical application. More recently, scaffold-guided bone regeneration (SGBR) with application of highly porous biodegradable constructs is emerging. Advancements in additive manufacturing technology now allow the cage designs that match requirements, such as stiffness of surrounding tissues, while providing long-term biomechanical stability. A favourable clinical outcome has been observed in the treatment of various bone defects, particularly for 3D-printed composite scaffolds made of medical-grade polycaprolactone (mPCL) in combination with a ceramic filler material. Therefore, advanced cage design made of mPCL and ceramic may also carry initial high spinal forces up to the time of bony fusion and subsequently resorb without clinical side effects. Furthermore, surface modification of implants is an effective approach to simultaneously reduce microbial infection and improve tissue integration. We present a design concept for a scaffold surface which result in osteoconductive and antimicrobial properties that have the potential to achieve higher rates of fusion and less clinical complications. In this review, we explore the preclinical and clinical studies which used bioresorbable cages. Furthermore, we critically discuss the need for a cutting-edge research program that includes comprehensive preclinical in vitro and in vivo studies to enable successful translation from bench to bedside. We develop such a conceptual framework by examining the state-of-the-art literature and posing the questions that will guide this field in the coming years.

Enhanced anti-microbial activity and osseointegration of Ta/Cu co-implanted polyetheretherketone

Polyetheretherketone (PEEK) has been widely applied for orthopedic and oral implants due to its excellent mechanical properties, biocompatibility, and radiolucency. However, its bioinert and the lack of anti-microbial activity limit its application. We modified the PEEK surface with Ta/Cu co-implantation using plasma immersion ion-implantation technology. After implantation of Ta/Cu ions, the morphology and roughness of the PEEK surface were not significantly changed at micron level. We estimated the cytocompatibility, anti-microbial ability, and osteogenic differentiation of rat bone mesenchymal stem cells (BMSCs) of the modified surfaces in vitro. Compared to the untreated surfaces, the Ta ion-treated surface showed improved adhesion, proliferation, ALP activity, ECM mineralization, and osteogenic gene expression of BMSCs. Further, the Cu ion-treated surface showed reduced initial adhesion and proliferation of Escherichia coli and Staphylococcus aureus in vitro and proliferation of Staphylococcus aureus in the mouse subcutaneous implant-associated infection model. According to a rat bone repair model, all Ta ion-implanted groups demonstrated improved new bone formation. In summary, Ta/Cu ion co-impanation improved anti-microbial activity and promoted osseointegration of the PEEK surface.

A Novel Antipathogenic Agent for Nonwoven Fabric

Medical-grade masks and N95 respirators containing non-woven fibers are designed to prevent the spread of airborne diseases. While they effectively trap respiratory droplets and aerosols, they cannot lyse entrapped pathogens. Embedded antimicrobial agents such as silver, copper, zinc, iodine, peptides, quaternary ammonium salts, or nanoparticles have been used to overcome this limitation. However, their effectiveness remains debatable because these materials can be toxins, allergens, irritants, and environmental hazards. Recently, silicon nitride (Si3N4) was found to be a potent antipathogenic compound, and it may be an ideal agent for masks. In powder or solid form, it is highly effective in inactivating bacteria, fungi, and viruses while leaving mammalian tissue unaffected. The purpose of this study was to serially assess the antiviral efficacy of Si3N4 against SARS-CoV-2 using powders, solids, and embedded nonwoven fabrics. Si3N4 powders and solids were prepared using conventional ceramic processing. The “pad-dry-cure” method was used to embed Si3N4 particles into polypropylene fibers. Fabric testing was subsequently conducted using industrial standards—ISO 18184 for antiviral effectiveness, ASTM F2299 and EN 13274-7 for filtration efficiency, EN 14683 for differential pressure drop, and ISO 18562-2 for particle shedding. A modification of ISO 18562-3 was also employed to detect ammonia release from the fabric. Antiviral effectiveness for Si3N4 powders, solids, and embedded fabrics were 99.99% at ≤ 5 min, ~ 93% in 24 h, and 87% to 92% in 120 min, respectively. Results of the standard mask tests were generally within prescribed safety limits. Further process optimization may lead to commercial Si3N4-based masks that not only “catch” but also “kill” pathogenic microbes.

A preliminary study on surface bioactivation of polyaryletherketone by UV-grafting with PolyNaSS: influence on osteogenic and antibacterial activities

Polyaryletherketone (PAEK) has good biocompatibility and mechanical properties and thus may have great potential in the fields of reparative medicine and bone intervention. In this study, the key representative PAEKs, polyetheretherketone (PEEK) and polyetherketoneketone (PEKK), were modified by UV grafting with sodium polystyrene sulfonate (polyNaSS) to improve their biocompatibility. Toluidine blue staining and Fourier transform infrared spectroscopic analyses showed that sulfonic acid groups were successfully introduced into PAEK, and the hydrophilicity and protein adsorption capacity of the materials were enhanced in a concentration-dependent manner. The effects of the grafted polyNaSS on osteoinduction and antibacterial properties of PAEK were analyzed in detail. We found that polyNaSS enhanced the viability, alkaline phosphatase activity, calcium mineral deposition, and levels of expression of osteoblast-related genes and proteins of adherent human umbilical cord Wharton's jelly-derived mesenchymal stem cells. In addition, when Escherichia coli, Staphylococcus aureus and Porphyromonas gingivalis were incubated with the materials, bacterial colony counting revealed that grafting of polyNaSS onto PAEK led to more potent inhibition of bacterial adhesion, and polyNaSS-grafted PEKK had stronger antibacterial performance than did polyNaSS-grafted PEEK fabricated under the same grafting conditions. These data show that polyNaSS-grafted PAEK, and particularly polyNaSS-grafted PEKK, may be useful as orthopedic and dental implant materials.

Silicon Nitride as a Biomedical Material: An Overview

Silicon nitride possesses a variety of excellent properties that can be specifically designed and manufactured for different medical applications. On the one hand, silicon nitride is known to have good mechanical properties, such as high strength and fracture toughness. On the other hand, the uniqueness of the osteogenic/antibacterial dualism of silicon nitride makes it a favorable bioceramic for implants. The surface of silicon nitride can simultaneously inhibit the proliferation of bacteria while supporting the physiological activities of eukaryotic cells and promoting the healing of bone tissue. There are hardly any biomaterials that possess all these properties concurrently. Although silicon nitride has been intensively studied as a biomedical material for years, there is a paucity of comprehensive data on its properties and medical applications. To provide a comprehensive understanding of this potential cornerstone material of the medical field, this review presents scientific and technical data on silicon nitride, including its mechanical properties, osteogenic behavior, and antibacterial capabilities. In addition, this paper highlights the current and potential medical use of silicon nitride and explains the bottlenecks that need to be addressed, as well as possible solutions.

Pharyngoesophageal Damage from Hardware Extrusion at an Average of 7.5 Years After Anterior Cervical Diskectomy and Fusion: A Case Series, Discussion of Risk Factors, and Guide for Management

OBJECTIVE

We present a single-institution case series of patients who experienced pharyngoesophageal damage, specifically from extruded hardware occurring at an average of 7.5 years after anterior cervical diskectomy and fusion (ACDF).

METHODS

A retrospective chart review was conducted of patients who had undergone ACDF with subsequent delayed pharyngoesophageal perforation or erosion from extruded hardware ≥1 year after surgery. A discussion of the literature surrounding this complication, including risk factors and management, is also presented.

RESULTS

Nine patients were identified (average age 58 years, 66.7% male) among a total of 4122 ACDF patients (incidence: 0.22%). Average time to injury was 7.5 years. Indications for initial ACDF were degenerative cervical disease (n = 7), ankylosing spondylitis (n = 1), and cervical fracture (n = 1). Eight patients had prior multilevel ACDF spanning 2 (n = 4), 3 (n = 1), or 4 levels (n = 2). Fusion levels for prior ACDF included C5-C7 (n = 3), C3-C7 (n = 2), C4-C7 (n = 1), C4-C6 (n = 1), C2-C5 (n = 1), and C6-C7 (n = 1). Pharyngoesophageal injuries included esophageal perforation (n = 3), pharyngeal perforation (n = 2), esophageal erosion (n = 3), and pharyngoesophageal erosion (n = 1). In most (n = 6) cases, the cause of pharyngoesophageal damage was due to ≥1 extruded screws. Dysphagia (n = 8) was the most common presenting symptom. For perforations (n = 5), 2 repairs used a rotational flap to reinforce a primary closure; the other 3 cases were repaired via primary closure.

CONCLUSIONS

Pharyngoesophageal damage caused by extruded hardware may occur several years after ACDF. These delayed complications are difficult to predict. Proper screw placement may be the most important factor for minimizing the chances of this potentially devastating complication, particularly with multilevel constructs.

Transforaminal lumbar interbody fusion with a silicon nitride cage demonstrates early radiographic fusion

BACKGROUND

Degeneration of the lumbar spine is common in aging adults and reflects a significant morbidity burden in this population. In selected patients that prove unresponsive to non-surgical treatment, posterior lumbar fusion (PLF) surgery, with or without adjunctive transforaminal lumbar interbody fusion (TLIF) can relieve pain and improve function. We describe here the radiographic fusion rates for PLF versus TLIF, using an intervertebral spinal cage made of silicon nitride ceramic (chemical formula Si₃N₄).

METHODS

This retrospective cohort analysis enrolled 99 patients from August 2013 to January 2017; 17 had undergone PLF at 24 levels, while 82 had undergone TLIF at 104 levels. All operations were performed by a single surgeon at one institution. Radiographic and clinical outcomes were compared between PLF and TLIF at 2 and 6 weeks and then at 3, 6, 12, and 24 months.

RESULTS

TLIF patients fused at higher rates compared to PLF at the 3-month (38.5% vs. 8.3%, P=0.006), 6-month (78.7% vs. 35.0%, P<0.001) and 12-month time periods (97.9% vs. 81.3%, P=0.018), with no difference at 24 months (100% vs. 94.4%, P=0.102). Index level segmental motion was significantly less and intervertebral disc height was improved in TLIF over PLF at all follow up intervals. Foraminal height was only greater in early follow up periods (2 weeks, 6 weeks and 3 months). TLIF patients experienced lover rates of PI-LL mismatch which was maintained across long term follow-up. Pelvic tilt was lower following TLIF compared to PLF, with no differences in complication rates between study groups.

CONCLUSIONS

Our retrospective series demonstrated that TLIF performed with silicon nitride interbody cages led to earlier radiographic fusion, greater restoration of disc and foraminal height, increased segmental rigidity and improved sagittal alignment when compared to PLF alone.

Success Factors of Additive Manufactured Root Analogue Implants

Dental implantation is an effective method for the treatment of loose teeth, but the threaded dental implants used in the clinic cannot match with the tooth extraction socket. A root analogue implant (RAI) has the congruence shape, which reduces the damage to bone and soft tissue. Additive manufacturing (AM) technologies have the advantages of high precision, flexibility, and easy operation, becoming the main manufacturing method of RAI in basic research. The purpose of this systematic review is to summarize AM technologies used for RAI manufacturing as well as the factors affecting successful implantation. First, it introduces the AM technologies according to different operating principles and summarizes the advantages and disadvantages of each method. Then the influences of materials, structure design, surface characteristics, implant site, and positioning are discussed, providing reference for designers and dentists. Finally, it addresses the gap between basic research and clinical application for additive manufactured RAIs and discusses the current challenges and future research directions for this field.

In vitro & in vivo investigation of the silicon nitride ceramic hip implant’s safety and effectiveness evaluation

Background

With regard to the ceramic hip joint implant, given the concerns in ceramic about the alumina brittleness and zirconia instability, is there any alternative material solution for the orthopedic implant? Beyond the metastable oxide ceramics, along the echelon of advanced technical ceramics, looking at the non-oxide ceramic, the silicon nitride could be an excellent candidate for the joint implant’s application. The purpose of this study is to investigate the safety, effectiveness and to demonstrate the potential of this silicon nitride hip implant.

Methods

According to the related ISO (International Organization for Standardization) standards, a series of in vitro (nine) & in vivo (five) tests, which had been accomplished for the aforementioned aim. Especially, the total hip replacement in pigs had been achieved, as per the authors’ knowledge, this is the first time to apply the THA (Total Hip Arthroplasty) in the big animal.

Results

Refer to the ISO 6474-2, in comparison with the current monopolized German product, this silicon nitride ceramic hip implant has high strength, high hardness, excellent fracture toughness, lower density, better wear resistance, good biocompatibility, inherent stability, corrosion resistance and bioactivity, bone integration capability.

Conclusions

This silicon nitride ceramic will be an admirable alternative solution with superior comprehensive property that can withstand the toughest conditions in the most demanding applications like in orthopedic and beyond.

Comparison of surface properties, cell behaviors, bone regeneration and osseointegration between nano tantalum/PEEK composite and nano silicon nitride/PEEK composite

Both tantalum (Ta) and silicon nitride (SN) exhibit osteogenic bioactivity and antibacterial property. In addition, as a biomaterial for bone repair, polyetheretherketone (PEEK) has outstanding biocompatibility and mechanical performances while it is biologically inert. In this study, by blending PEEK with Ta and SN nanoparticles, respectively, Ta/PEEK composite (TPC) and SN/PEEK composite (SPC) were fabricated for load-bearing bone repair. The surface roughness, hydrophilicity and surface energy of TPC containing Ta nanoparticles were higher than SPC containing SN nanoparticles and PEEK. In addition, TPC with Ta nanoparticles exhibited low antibacterial property while SPC with SN nanoparticles showed high bacterial property. Moreover, the MC3T3-E1 cells responses (e.g. proliferation and differentiation) to TPC was the highest while PEEK was the lowest in vitro. Furthermore, new bone formation and osseointegration for TPC was the highest while PEEK was the lowest in vivo. In conclusion, compared with PEEK, addition of Ta and SN nanoparticles into PEEK fabricated bioactive composites of TPC and SPC with optimized surface property, which played crucial roles in inducing cellular response/bone regeneration. Although the osteogenic activity of SPC was lower than TPC, SPC exhibited osteogenic activity and good antibacterial property, which could prevent infection from bacterial. Therefore, SPC would have better potential for bone substitute.

Silicon Nitride, a Bioceramic for Bone Tissue Engineering: A Reinforced Cryogel System With Antibiofilm and Osteogenic Effects

Silicon nitride (SiN [Si3N4]) is a promising bioceramic for use in a wide variety of orthopedic applications. Over the past decades, it has been mainly used in industrial applications, such as space shuttle engines, but not in the medical field due to scarce data on the biological effects of SiN. More recently, it has been increasingly identified as an emerging material for dental and orthopedic implant applications. Although a few reports about the antibacterial properties and osteoconductivity of SiN have been published to date, there have been limited studies of SiN-based scaffolds for bone tissue engineering. Here, we developed a silicon nitride reinforced gelatin/chitosan cryogel system (SiN-GC) by loading silicon nitride microparticles into a gelatin/chitosan cryogel (GC), with the aim of producing a biomimetic scaffold with antibiofilm and osteogenic properties. In this scaffold system, the GC component provides a hydrophilic and macroporous environment for cells, while the SiN component not only provides antibacterial properties and osteoconductivity but also increases the mechanical stiffness of the scaffold. This provides enhanced mechanical support for the defect area and a better osteogenic environment. First, we analyzed the scaffold characteristics of SiN-GC with different SiN concentrations, followed by evaluation of its apatite-forming capacity in simulated body fluid and protein adsorption capacity. We further confirmed an antibiofilm effect of SiN-GC against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as well as enhanced cell proliferation, mineralization, and osteogenic gene upregulation for MC3T3-E1 pre-osteoblast cells. Finally, we developed a bioreactor to culture cell-laden scaffolds under cyclic compressive loading to mimic physiological conditions and were able to demonstrate improved mineralization and osteogenesis from SiN-GC. Overall, we confirmed the antibiofilm and osteogenic effect of a silicon nitride reinforced cryogel system, and the results indicate that silicon nitride as a biomaterial system component has a promising potential to be developed further for bone tissue engineering applications.

Tailoring Silicon Nitride Surface Chemistry for Facilitating Odontogenic Differentiation of Rat Dental Pulp Cells

Silicon nitride (Si3N4) can facilitate bone formation; hence, it is used as a biomaterial in orthopedics. Nevertheless, its usability for dentistry is unexplored. The aim of the present study was to investigate the effect of Si3N4 granules for the proliferation and odontogenic differentiation of rat dental pulp cells (rDPCs). Four different types of Si3N4 granules were prepared, which underwent different treatments to form pristine as-synthesized Si3N4, chemically treated Si3N4, thermally treated Si3N4, and Si3N4 sintered with 3 wt.% yttrium oxide (Y2O3). rDPCs were cultured on or around the Si3N4 granular beds. Compared with the other three types of Si3N4 granules, the sintered Si3N4 granules significantly promoted cellular attachment, upregulated the expression of odontogenic marker genes (Dentin Matrix Acidic Phosphoprotein 1 and Dentin Sialophosphoprotein) in the early phase, and enhanced the formation of mineralization nodules. Furthermore, the water contact angle of sintered Si3N4 was also greatly increased to 40°. These results suggest that the sintering process for Si3N4 with Y2O3 positively altered the surface properties of pristine as-synthesized Si3N4 granules, thereby facilitating the odontogenic differentiation of rDPCs. Thus, the introduction of a sintering treatment for Si3N4 granules is likely to facilitate their use in the clinical application of dentistry.

Updates in biomaterials of bearing surfaces in total hip arthroplasty

Total hip arthroplasty (THA) is one of the most successful surgical procedures. It entails replacement of the damaged or diseased joint surface with artificial materials. Various materials had been developed and used to achieve optimal outcomes, including longer survivorship and minimal complications. The primary materials used in the manufacture of THA implants are polymers, metal alloys, and ceramics. The failures of THA mainly result from aseptic loosening due to the production of wear particles and the development of periprosthetic joint injection. A lot of advancement and introduction of new biomaterials in THA implants’ armamentarium are designed to avoid the common failure mechanisms and improve the longevity of the implants. In this review, we discussed various aspects of commonly used biomaterials in THA implants, to provide some updated information.

Evaluation of Staphylococcus aureus and Candida albicans biofilms adherence to PEEK and titanium-alloy prosthetic spine devices

BACKGROUND

Titanium and polyether-ether-ketone (PEEK) interbody cages are commonly used for spine fusion. Few data are known about bacterial and yeast biofilms formation in these implants. The aim of this study was to compare Staphylococcus aureus and Candida albicans biofilm formation in the surface of two different interbody devices used routinely in spine surgery.

METHODS

Six bodies of proof specimens of PEEK and titanium alloy were used for microbiological tests, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Experimental biofilm was produced with Staphylococcus aureus and Candida albicans, followed by quantitative analysis of planktonic cells and sessile cells. The comparison between the medians of biofilm quantification between the two models was performed using the Mann-Whitney test and considered the statistical difference for a p < 0.05.

RESULTS

In the S. aureus model, in both planktonic and sessile cell counts, titanium-alloy samples showed lower values for colony forming units per milliliter (UFC/mL) (p < 0.05). The evaluation through the optic density of planktonic and sessile cells showed lower values in the titanium-alloy samples, however, only statistically significant in planktonic cell count (p < 0.05). The count of planktonic yeast cells in PEEK was similar to titanium-alloy samples, while the count of sessile yeast cells in titanium alloy was lower when compared to PEEK (p < 0.05).

CONCLUSION

Titanium-alloy models were associated with less staphylococcal and Candida biofilm formation when compared with PEEK.

A novel surgical model for the preclinical assessment of the osseointegration of dental implants: a surgical protocol and pilot study results

BACKGROUND

Dental implants are considered the gold standard replacement for missing natural teeth. The successful clinical performance of dental implants is due to their ability to osseointegrate with the surrounding bone. Most dental implants are manufactured from Titanium and it alloys. Titanium does however have some shortcomings so alternative materials are frequently being investigated. Effective preclinical studies are essential to transfer the innovations from the benchtop to the patients. Many preclinical studies are carried out in the extra-oral bones of small animal models to assess the osseointegration of the newly developed materials. This does not simulate the oral environment where the dental implants are subjected to several factors that influence osseointegration; therefore, they can have limited clinical value.

AIM

This study aimed to develop an appropriate in-vivo model for dental implant research that mimic the clinical setting. The study evaluated the applicability of the new model and investigated the impact of the surgical procedure on animal welfare.

MATERIALS AND METHODS

The model was developed in male New Zealand white rabbits. The implants were inserted in the extraction sockets of the secondary incisors in the maxilla. The model allows a split-mouth comparative analysis. The implants' osseointegration was assessed clinically, radiographically using micro-computed tomography (µ-CT), and histologically. A randomised, controlled split-mouth design was conducted in 6 rabbits. A total of twelve implants were inserted. In each rabbit, two implants; one experimental implant on one side, and one control implant on the other side were applied. Screw-shaped implants were used with a length of 8 mm and a diameter of 2 mm.

RESULTS

All the rabbits tolerated the surgical procedure well. The osseointegration was confirmed clinically, histologically and radiographically. Quantitative assessment of bone volume and mineral density was measured in the peri-implant bone tissues. The findings suggest that the new preclinical model is excellent, facilitating a comprehensive evaluation of osseointegration of dental implants in translational research pertaining to the human application.

CONCLUSION

The presented model proved to be safe, reproducible and required basic surgical skills to perform.

Comprehensive in vitro comparison of cellular and osteogenic response to alternative biomaterials for spinal implants

A variety of novel biomaterials are emerging as alternatives to conventional metals and alloys, for use in spinal implants. These promise potential advantages with respect to e.g. elastic modulus compatibility with the host bone, improved radiological imaging or enhanced cellular response to facilitate osseointegration. However, to date there is scarce comparative data on the biological response to many of these biomaterials that would give insights into the relative level of bone formation, resorption inhibition and inflammation. Thus, in this study, we aimed to evaluate and compare the in vitro biological response to standard discs of four alternative biomaterials: polyether ether ketone (PEEK), zirconia toughened alumina (ZTA), silicon nitride (SN) and surface-textured silicon nitride (ST-SN), and the reference titanium alloy Ti6Al4V (TI). Material-specific characteristics of these biomaterials were evaluated, such as surface roughness, wettability, protein adsorption (BSA) and apatite forming capacity in simulated body fluid. The activity of pre-osteoblasts seeded on the discs was characterized, by measuring viability, proliferation, attachment and morphology. Then, the osteogenic differentiation of pre-osteoblasts was compared in vitro from early to late stage by Alizarin Red S staining and real-time PCR analysis. Finally, osteoclast activity and inflammatory response were assessed by real-time PCR analysis. Compared to TI, all other materials generally demonstrated a lower osteoclastic activity and inflammatory response. ZTA and SN showed generally an enhanced osteogenic differentiation and actin length. Overall, we could show that SN and ST-SN showed a higher osteogenic effect than the other reference groups, an inhibitive effect against bone resorption and low inflammation, and the results indicate that silicon nitride has a promising potential to be developed further for spinal implants that require enhanced osseointegration.

Development of hydrofluoric acid-cleaned silicon nitride implants for periprosthetic infection eradication and bone regeneration enhancement

Orthopedic implant is commonly associated with occurrence or relapse of osteomyelitis. This study developed a hydrofluoric acid (HF) cleaned silicon nitride (Si₃N₄) implant Si₃N₄_AC for osteomyelitis control and established a rat tibial osteomyelitis model to evaluate its efficacy on eradicating periprosthetic infection and enhancing bone regeneration. In vitro studies revealed Si₃N₄_AC had improved biocompatibility and inhibited Staphylococcus aureus adhesion. A custom-made Si₃N₄_AC implant was prepared and inserted into the rat tibia longitudinal cavity inoculated with Staphylococcus aureus. The in vivo bacteriostatic and osteogenic efficacies of Si₃N₄_AC implant were evaluated by histological, microbiological and Micro-CT analyses and compared with implants of pure Ti and Si₃N₄ . Si₃N₄_AC implant group revealed 99.5% inhibition of periprosthetic Staphylococcus aureus compared to the osteomyelitis group after 14 days post-operation. Implant-adhering bacteria density of Si₃N₄_AC was also much lower than pure Ti and Si₃N₄. In addition, micro-CT evaluation of peri-implant bone formation under the condition of periprosthetic osteomyelitis after 30 days post-surgery confirmed the osteogenic ability of Si₃N₄_AC. Taken together, Si₃N₄_AC can be an effective orthopedic biomaterial to eradicate periprosthetic infection and enhance bone regeneration.

Enhanced biomaterials: systematic review of alternatives to supplement spine fusion including silicon nitride, bioactive glass, amino peptide bone graft, and tantalum

OBJECTIVE

Spinal fusions are among the most common and effective spinal surgical practices; however, the current model presents some cost and safety concerns within the patient population. Therefore, enhanced biomaterials have been presented to be an innovative yet underutilized tool to supplement the success of spinal fusion surgery. Herein, the authors discuss these biomaterials, their compositions, clinical outcomes, and cost analysis through a systematic review of the literature to date.

METHODS

This systematic review was conducted using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) criteria and guidelines. Article selection was performed using the PubMed electronic bibliographic databases. The search yielded 1168 articles that were assessed and filtered for relevance by the four authors. Following the screening of titles and abstracts, 62 articles were deemed significant enough for final selection.

RESULTS

To date, silicon nitride, bioactive glass, amino peptide bone grafts, and tantalum are all biomaterials that could have significant roles in supporting spinal fusion. Their unique compositions allow them to be biocompatible in the spine, and their mechanisms of action stimulate osteoblast formation and support fusion success. Moreover, these biomaterials also present positive clinical and cost outcomes that support their application in spinal procedures. However, further studies with longer follow-ups are necessary to fully understand these biomaterials prior to their incorporation in mainstream spinal practice.

CONCLUSIONS

The combination of their positive clinical outcomes, biocompatibility, and cost-effectiveness makes these biomaterials valuable, innovative, and effective treatment modalities that could revolutionize the current model of spinal fusion.

A microporous surface containing Si3N4/Ta microparticles of PEKK exhibits both antibacterial and osteogenic activity for inducing cellular response and improving osseointegration

As an implantable biomaterial, polyetherketoneketone (PEKK) exhibits good mechanical strength but it is biologically inert while tantalum (Ta) possesses outstanding osteogenic bioactivity but has a high density and elastic modulus. Also, silicon nitride (SN) has osteogenic and antibacterial activity. In this study, a microporous surface containing both SN and Ta microparticles on PEKK (STP) exhibiting excellent osteogenic and antibacterial activity was created by sulfonation. Compared with sulfonated PEKK (SPK) without microparticles, the surface properties (roughness, surface energy, hydrophilicity and protein adsorption) of STP significantly increased due to the SN and Ta particles presence on the microporous surface. In addition, STP also exhibited outstanding antibacterial activity, which inhibited bacterial growth in vitro and prevented bacterial infection in vivo because of the presence of SN particles. Moreover, the microporous surface of STP containing both SN and Ta particles remarkably induced response (e.g., proliferation and differentiation) of rat bone mesenchymal stem (rBMS) cells in vitro. Furthermore, STP significantly improved new bone regeneration and osseointegration in vivo. Regarding the induction of cellular response in vitro and improvement of osseointegration in vivo, the microporous surface containing Ta was better than the surface with SN particles. In conclusion, STP with optimized surface properties activated cellular responses in vitro, enhanced osseointegration and prevented infection in vivo. Therefore, STP possessed the dual biofunctions of excellent osteogenic and antibacterial activity, showing great potential as a bone substitute.

•Microporous surface containing SN/Ta microparticles on PEKK (STP) was created.

•Surface performances (e.g., roughness) of STP were significantly increased.

•STP exhibited antibacterial activity in vitro and prevented infection in vivo.

•STP remarkably induced response of bone mesenchymal stem cells in vitro.

•STP obviously improved bone regeneration and osseointegration in vivo.

Development of Multifunctional Materials Based on Poly(ether ether ketone) with Improved Biological Performances for Dental Applications

The main target for the future of materials in dentistry aims to develop dental implants that will have optimal integration with the surrounding tissues, while preventing or avoiding bacterial infections. In this project, poly(ether ether ketone) (PEEK), known for its suitable biocompa-tibility and mechanical properties for dental applications, was loaded with 1, 3, and 5 wt.% ZnO nanoparticles to provide antibacterial properties and improve interaction with cells. Sample cha-racterization by X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) as well as mechanical properties showed the presence of the nanoparticles and their effect in PEEK matrices, preserving their relevant properties for dental applications. Al-though, the incorporation of ZnO nanoparticles did not improve the mechanical properties and a slight decrease in the thermal stability of the materials was observed. Hemocompatibility and osteoblasts-like cell viability tests showed improved biological performances when ZnO was present, demonstrating high potential for dental implant applications.

A comparative study on silicon nitride, titanium and polyether ether ketone on mouse pre-osteoblast cells

The current study provides more insights about the surface bioactivity of the silicon nitride (Si₃N₄) as a potential candidate for bone regeneration in craniofacial and orthopaedic applications compared with conventional implantation materials. Current skeletal reconstructive materials such as titanium and polyether ether ketone (PEEK) are limited by poor long-term stability, biocompatibility and prolonged healing. Si₃N₄ is an FDA-approved material for an intervertebral spacer in spinal fusion applications. It is biocompatible and has antimicrobial properties. Here, we hypothesize that Si₃N₄ was found to be an osteoconductive material and conducts the growth, differentiation of MC3T3-E1 cells for extracellular matrix deposition, mineralization and eventual bone regeneration for craniofacial and orthopaedic applications. MC3T3-E1 cells were used to study the osteoblastic differentiation and mineralization on sterile samples of Si₃N₄, titanium alloy and PEEK. The samples were then analysed for extracellular matrix deposition and mineralization by FTIR, Raman spectroscopy, SEM, EDX, Alizarin Red, qRT-PCR and ELISA. The in vitro study indicates the formation of collagen fibres and mineral deposition on all three sample surfaces. There was more profound and faster ECM deposition and mineralization on Si₃N₄ surface as compared to titanium and PEEK. The FTIR and Raman spectroscopy show formation of collagen and mineral deposition at 30 days for Si₃N₄ and titanium and not PEEK. The peaks shown by Raman for Si₃N₄ resemble closely to natural bone. Results also indicate the upregulation of osteogenic transcription factors such as RUNX2, SP7, collagen type I and osteocalcin. The authors concluded that Si₃N₄ rapidly conducts mineralized tissue formation via extracellular matrix deposition and biomarker expression in mouse calvarial pre-osteoblast cells. Thus, this study confirms that the bioactive Si₃N₄ could be a potential material for craniofacial and orthopaedic applications leading to rapid bone regeneration that resemble the natural bone structure.

Silicon nitride ceramic for all-ceramic dental restorations

Silicon nitride (Si₃N₄) is one of the promising ceramics for dental restoration due to providing significant benefits during the application. This study aimed to investigate the potential use of Si₃N₄ for all-ceramic dental restorations by characterizing some critical properties as color shade, mechanical resistance, shear-bond strength and radiolucency. For our study, porous Si₃N₄ ceramic was produced by partial sintering process with limited amounts of sintering additives and low temperature. A commercial ZrO₂ ceramic was prepared according to manufacturer's instructions and results were compared with Si₃N₄. Si₃N₄ is an attractive ceramic for dental applications with good mechanical properties even in porous form, it has additional advantages over the conventional ceramics used as restorative material, such as, inherent antibacterial/anti-infective activity, radiolucency, and lower hardness. It is expected that Si₃N₄ will become popular in dental applications as well.

Implications for diagnosis and treatment of peri-spinal implant infections from experiences in periprosthetic joint infections-a literature comparison and review

Both, periprosthetic joint infection (PJI) and peri-spinal implant infection (PSII) are serious complications occurring in arthroplasty and spine instrumentation with absolute numbers expected to rise in the next years. The currently existing literature data describing the characteristics of PSII are limited when compared to PJI studies. However, both PJI and PSII exhibit similarities concerning pathogenesis, symptoms, diagnosis, treatment and prognosis. This literature review aims at comparing PJI and PSII and to develop implications for diagnosis and treatment of PSII from existing studies about PJI. The review was performed on the basis of a structured PubMed, Cochrane Library, and Medline analysis and existing guidelines, with 99 references being included. The results indicate that specific terms like re-infection should be defined in the context of PSII based on existing definitions of PJI, that in vitro biofilm studies and studies analyzing different prosthesis surfaces in arthroplasty could be used for PSII, and that histopathology as an additional standard tool in PSII diagnosis might be helpful. In addition, the development of a standardized algorithm-based treatment system with antibiotic protocols, including long term suppression, for PSII similar to the ones existing for PJI is necessary.

Protein adsorption and in vitro behavior of additively manufactured 3D-silicon nitride scaffolds intended for bone tissue engineering

Highly porous scaffolds of Si₃N₄ are fabricated by direct ink writing method (Robocasting) with a pattern of macroporous cavities of 650-700μm. Two different Si₃N₄ ink compositions regarding the oxide sintering aids (namely, Y₂O₃, Al₂O₃, and SiO₂) are tried. Both inks reach solid volume fractions of ~0.40 with about 10-12wt% of polymeric additive content that imparts the necessary pseudoplastic characteristics. The printed structures are sintered under controlled N₂ atmosphere either in a conventional graphite furnace or by the spark plasma sintering technique. Skeleton of the scaffolds reaches densities above 95% of the theoretical value with ≈18-24% of linear shrinkage. Analysis of the crystalline phases, microstructure and mechanical properties are comparatively done for both compositions. The bioactivity of these structures is addressed by evaluating the ion release rate in simulated body fluid. In parallel, atomic force microscopy is used to determine the effect of the filaments surface roughness on protein adsorption (Bovine Serum Albumin) for assessing the potential application of 3D-Si₃N₄ scaffolds in bone regeneration.

Strategies to Reduce Biofilm Formation in PEEK Materials Applied to Implant Dentistry-A Comprehensive Review

Polyether-ether-ketone (PEEK) has emerged in Implant Dentistry with a series of short-time applications and as a promising material to substitute definitive dental implants. Several strategies have been investigated to diminish biofilm formation on the PEEK surface aiming to decrease the possibility of related infections. Therefore, a comprehensive review was carried out in order to compare PEEK with materials widely used nowadays in Implant Dentistry, such as titanium and zirconia, placing emphasis on studies investigating its ability to grant or prevent biofilm formation. Most studies failed to reveal significant antimicrobial activity in pure PEEK, while several studies described new strategies to reduce biofilm formation and bacterial colonization on this material. Those include the PEEK sulfonation process, incorporation of therapeutic and bioactive agents in PEEK matrix or on PEEK surface, PEEK coatings and incorporation of reinforcement agents, in order to produce nanocomposites or blends. The two most analyzed surface properties were contact angle and roughness, while the most studied bacteria were Escherichia coli and Staphylococcus aureus. Despite PEEK's susceptibility to biofilm formation, a great number of strategies discussed in this study were able to improve its antibiofilm and antimicrobial properties.

Surface functionalization of PEEK with silicon nitride

Surface roughness, bioactivity, and antibacterial properties are desirable in skeletal implants. We hot-pressed a mix of particulate sodium chloride (NaCl) salt and silicon nitride (β-Si3N4) onto the surface of bulk PEEK. NaCl grains were removed by leaching in water, resulting in a porous PEEK surface embedded with ~15 vol.% β-Si3N4 particles. This functionalized surface showed the osteogenic and antibacterial properties previously reported in bulk silicon nitride implants. Surface enhancement of PEEK with β-Si3N4 could improve the performance of spinal fusion cages, by facilitating arthrodesis and resisting bacteria.

Two-year results of a double-blind multicenter randomized controlled non-inferiority trial of polyetheretherketone (PEEK) versus silicon nitride spinal fusion cages in patients with symptomatic degenerative lumbar disc disorders

Background

During lumbar spinal fusion, spacer cages are implanted to provide vertebral stability, restore sagittal alignment, and maintain disc and foraminal height. Polyetheretherketone (PEEK) is commonly used by most spine surgeons. Silicon nitride (Si₃N₄) is a less well-known alternative although it was first used as a spacer in lumbar fusion over 30 years ago. The present study was designed to see if Si₃N₄ cages would perform similarly to PEEK in a randomized controlled trial.

Methods

A non-inferiority multicenter 100-patient study was designed where both the observer and patient were blinded. Single- or double-level transforaminal lumbar interbody fusion with pedicle screw fixation using an oblique PEEK or Si₃N₄ cage was performed. The primary non-inferiority outcome was the Roland-Morris Disability Questionnaire (RMDQ). Secondary measures included the Oswestry Disability Questionnaire, Visual Analogue Scales (VAS) for back and leg pain, SF-36 Physical and Mental Function indices, patient and surgeon Likert scores on perceived recovery, and X-ray and CT radiological evaluations for subsidence, segmental motion, and fusion. Follow-up evaluations occurred at 3, 6, 12, and 24 months.

Results

After exclusions for protocol violations and canceled surgeries, 92 patients were randomized (i.e., 48 for PEEK and 44 for Si₃N₄). There were no differences in baseline demographics, pre-operative disabilities, or pain scores between the groups. Both treatment arms showed significant improvements in disability, pain, and recovery scores. No significant differences were observed for subsidence, segmental motion, or fusion. For the primary outcome (i.e., RMDQ scores), the non-inferiority of Si₃N₄ compared to PEEK could not be established using the original protocol criteria. However, the comparison was undermined by larger than anticipated patient fallout coupled with higher than expected RMDQ score standard deviations. A post hoc analysis coupled with a more extensive review of the literature was conducted which resulted in the selection of a revised clinically justified non-inferiority margin; and using this method, the non-inferiority of Si₃N₄ was affirmed.

Conclusions

This study demonstrated that the use of either PEEK or Si₃N₄ cages is safe and effective for patients undergoing lumbar spine fusion for chronic degenerative disc disease.

A hierarchical nanostructural coating of amorphous silicon nitride on polyetheretherketone with antibacterial activity and promoting responses of rBMSCs for orthopedic applications

Silicon nitride (SN) with good osteoconductivity has been introduced as an implantable biomaterial for joint replacement and interbody fusion devices. In this study, SN was coated on a polyetheretherketone (PEEK) surface by inductively coupled plasma-enhanced chemical vapor deposition (ICPECVD). The results showed that a dense coating (thickness of about 500 nm) of amorphous SN was closely combined with a PEEK substrate (PKSN) with a binding strength of 6.88 N. In addition, the coating surface showed hierarchical nanostructures containing many spherical bulges (sizes about 150 nm), which were composed of many small humps (sizes about 10 nm). Moreover, the roughness, hydrophilicity, surface energy, surface charge and adsorption of bovine serum albumin (BSA) of PKSN were obviously higher than those of PEEK. After immersion into simulated body fluid (SBF), the Si ions were gradually released from PKSN into SBF and a weak alkaline environment was created. Antibacterial experiments showed that PKSN exhibited a greater antibacterial activity than that of PEEK. Moreover, compared with PEEK, PKSN significantly promoted adhesion, proliferation, differentiation and expression of osteogenic related genes of the rat bone marrow stromal cells (rBMSCs). In conclusion, the SN coating of PKSN with hierarchical nanostructures exhibited excellent antibacterial activity and cytocompatibility, which would make it a great candidate for orthopedic applications.

Development of silicon nitride ceramic for CAD/CAM restoration

White Silicon nitride (Si₃N₄) ceramic has unique characteristics. Because of its high fracture toughness, strength, and biocompatibility, it can therefore be used to fabricate dental restorations. The purpose of this study was to produce partially-sintered block of Si₃N₄ for fabrication of CAD/CAM dental restorations. The related properties of this novel Si₃N₄ were evaluated including sintered shrinkage, flexural strength and fracture toughness. Partially sintered Si₃N₄ ceramic blocks were prepared by heating at 1,400°C for 2 h under N₂ gas. After full sintering at 1,650^oC for 2 h, the linear shrinkage value was recorded at 19.88±0.56%. The flexural strength and fracture toughness were measured, the results were 891.21±37.25 MPa and 6.33±0.30 MPa•m^1/2, respectively. These results showed that flexural strength and fracture toughness of Si₃N₄ were more than 800 MPa and 5 MPa•m^1/2, the white Si₃N₄ developed in this study can be used to fabricate multi-unit dental restorations According to ISO 6872.

Customized Therapeutic Surface Coatings for Dental Implants

Dental implants are frequently used to support fixed or removable dental prostheses to replace missing teeth. The clinical success of titanium dental implants is owed to the exceptional biocompatibility and osseointegration with the bone. Therefore, the enhanced therapeutic effectiveness of dental implants had always been preferred. Several concepts for implant coating and local drug delivery had been developed during the last decades. A drug is generally released by diffusion-controlled, solvent-controlled, and chemical controlled methods. Although a range of surface modifications and coatings (antimicrobial, bioactive, therapeutic drugs) have been explored for dental implants, it is still a long way from designing sophisticated therapeutic implant surfaces to achieve the specific needs of dental patients. The present article reviews various interdisciplinary aspects of surface coatings on dental implants from the perspectives of biomaterials, coatings, drug release, and related therapeutic effects. Additionally, the various types of implant coatings, localized drug release from coatings, and how released agents influence the bone–implant surface interface characteristics are discussed. This paper also highlights several strategies for local drug delivery and their limitations in dental implant coatings as some of these concepts are yet to be applied in clinical settings due to the specific requirements of individual patients.

Si-Fe-C-N Coatings for Biomedical Applications: A Combinatorial Approach

Ceramic coatings may prolong the lifetime of joint implants. Certain ions and wear debris may however lead to negative biological effects. SiN-based materials may substantially reduce these effects, but still need optimization for the application. In this study, a combinatorial deposition method enabled an efficient evaluation of a range of Si-Fe-C-N coating compositions on the same sample. The results revealed compositional gradients of Si (26.0-33.9 at.%), Fe (9.6-20.9 at.%), C (8.2-13.9 at.%) and N (39.7-47.2 at.%), and low oxygen contaminations (0.3-0.6 at.%). The mechanical properties varied with a hardness (H) ranging between 13.7-17.3 GPa and an indentation modulus (M) between 190-212 GPa. Both H and M correlated with the Si (H and M increased as Si increased) and Fe (H and M decreased as Fe increased) content. A slightly columnar morphology was observed in cross-sections, as well as a surface roughness in the nm range. A cell study revealed adhering pre-osteogenic MC3T3 cells, with a morphology similar to that of cells seeded on a tissue culture plastic control. The investigated coatings could be considered for further investigation due to the ability to tune their mechanical properties while maintaining a smooth surface, together with their promising in vitro cell response.

Surface Functionalization of Polyethylene by Silicon Nitride Laser Cladding

Functional coatings are commonly applied to biomaterials in order to improve their properties. In this work, polyethylene was coated with a silicon nitride (Si3N4) powder using a pulsed laser source in a nitrogen gas atmosphere. Several analytical techniques were used to characterize the functionalized surface of the polymer, including Raman spectroscopy, laser microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Antibacterial properties were tested in vitro against Staphylococcus epidermidis. The Si3N4 coating sensibly reduced the amount of living bacteria when compared to the uncoated polymer. Osteoconductivity was also tested in vitro using SaOS-2 osteosarcoma cells. The presence of Si3N4 coating resulted in an increased amount of hydroxyapatite. Coating of polyethylene with silicon nitride may lead to improved performance of indwelling orthopaedic or less invasive medical devices.