Green biosynthesis of superparamagnetic magnetite Fe3O4 nanoparticles and biomedical applications in targeted anticancer drug delivery system: A review

Synthesis of magnetic bio-nanocomposite hydrogel beads based on sodium alginate and β-cyclodextrin: Potential pH-responsive oral delivery anticancer systems for colorectal cancer

Developing an efficient treatment method is crucial in oral delivery systems due to its comfortable drug administration. This work aims to synthesize pH-responsive magnetic bio-nanocomposite hydrogel beads (MHBs) based on sodium alginate and β-cyclodextrin to deliver the doxorubicin (DOX) drug against colorectal cancer. The Fe3O4 NPs were used to increase the efficiency of the drug carriers in the tumor site and modified with green synthesized Ag NPs, which were reduced and stabilized by basil plant extract to increase anti-bacterial and anti-oxidant properties. FTIR, XRD, SEM, VSM, and TGA analysis confirmed the successful synthesis. The prepared MHBs were studied at different simulated digestive system pH values and represented pH-sensitive swelling behavior. The minimal and highest ratio of the drug releases from MHBs was seen at pH 1.2 < 1 % and pH 7.4 > 98 %, respectively. The antibacterial study revealed the highest activity of MHBs versus Staphylococcus aureus > 98.68 % and Escherichia coli > 99.2 %, respectively. The antioxidant study revealed the desired activity. The MTT assay of DOX-loaded MHBs on HT-29 cell lines revealed controlled release properties of MHBs with IC50 about 64 μL/mL, promising the controlled delivery of anticancer agents for colon cancer treatment.

Preparation of immobilized xanthine oxidase with magnetic metal-organic framework and its application in screening of active ingredients in traditional Chinese medicine

Enzymes play a crucial role in the development and progression of various diseases, making them important targets for drug development. However, the stability issues associated with natural enzymes limit their broader application. Traditional methods for screening enzyme inhibitors from natural products are often time-consuming and labor-intensive. In this study, we designed and employed magnetic metal-organic frameworks (MOFs) to immobilize xanthine oxidase for the first time. By leveraging the porous structure and high specific surface area of MOFs, combined with the magnetic responsiveness of nanoparticles, we successfully developed a novel method for the efficient screening of potential enzyme inhibitors derived from natural products. By using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide/N-hydroxysuccinimide (EDC/NHS) as a cross-linking agent, we achieved efficient immobilization of xanthine oxidase and identified baicalin as a potential inhibitor from the extract of Scutellaria baicalensis. In addition, we confirmed the adsorption capacity of this method for hordenine, demonstrated the specific adsorption of allopurinol, and also performed in vitro activity validation for baicalein. We not only successfully prepared the immobilized enzyme but also showcased that this method can efficiently screen and isolate potential enzyme inhibitors from traditional Chinese medicine, which provides a rapid and efficient new strategy for identifying enzyme inhibitors in natural products. This innovative approach offers a fresh perspective on the application of botanical medicine and the pharmacological treatment of hyperuricemia, which has important theoretical and practical significance. Graphical abstract Schematic diagram of synthesis of XO@MMOF (A) and ligand fishing process (B).

Comparative photocatalytic performance of iron nanoparticles biosynthesized from aqueous extracts of potato, potato peels, and leaves

This study presents an eco-friendly, cost-effective approach for synthesizing highly efficient nanocatalysts with the help of organic waste. Iron nanoparticles (INPs) were synthesized from aqueous extracts of potato, potato peel, and potato leaf and were evaluated for their photocatalytic efficiency for the degradation of methylene blue dye. X-ray Diffraction (XRD) confirmed Fe3O4 nanoparticles cubic crystal structure with the smallest crystallite size (9.52 nm) with potato peel, and Brunauer-Emmett-Teller (BET) analysis also showed the highest surface area (61.2 m2/g) for the same material. At the same time, other characterizations such as Fourier-Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), and Ultraviolet-Visible Spectroscopy (UV-Vis) for these nanoparticles were also performed, which provided insights into the chemical and physical composition and photoactivity. Photocatalytic tests demonstrated efficient methylene blue (MB) degradation under sunlight for all iron nanoparticles. The iron nanoparticle prepared using potato peel extracts achieved the highest degradation efficiency of 99 % in 120 min, with the highest first-order kinetics K = 0.0426 min-1, attributed to its smallest crystallite size, highest surface area, and suitable band gap.

Zeolitic imidazolate framework functionalized magnetic multiwalled carbon nanotubes as efficient adsorbents for rapid extraction of fluoroquinolones

Herein, a new, environmentally friendly, and economical magnetic solid-phase extraction method for fluoroquinolones (FQs) from milk samples was developed using novel recyclable zeolitic imidazolate framework functionalized magnetic multiwalled carbon nanotubes (Fe3O4@MWCNTs@SiO2@ZIF-8) as adsorbents. Various characterization techniques, including scanning electron microscopy, N2 adsorption-desorption analysis, and vibrating sample magnetometry, demonstrated that the adsorbent possessed a remarkable specific surface area, pore volume, and superparamagnetic properties, rendering it an excellent adsorbent. Combined with high-performance liquid chromatography, this method exhibited excellent linearity (R2 ≥ 0.9991) over the concentration range of 0.5-500 μg L-1, low limits of detection (0.10-0.34 μg kg-1), and low limits of quantification (0.30-1.00 μg kg-1). Finally, the developed method was successfully applied to analyze FQs in milk samples with recoveries ranging from 83.3% to 107.7% and relative standard deviations below 4.2%. The high efficiency and sensitivity of this method highlight the potential application of Fe3O4@MWCNTs@SiO2@ZIF-8 for analyzing FQs in complex matrices.

Drug Release Nanoparticle System Design: Data Set Compilation and Machine Learning Modeling

Magnetic nanoparticles (NPs) are gaining significant interest in the field of biomedical functional nanomaterials because of their distinctive chemical and physical characteristics, particularly in drug delivery and magnetic hyperthermia applications. In this paper, we experimentally synthesized and characterized new Fe3O4-based NPs, functionalizing its surface with a 5-TAMRA cadaverine modified copolymer consisting of PMAO and PEG. Despite these advancements, many combinations of NP cores and coatings remain unexplored. To address this, we created a new data set of NP systems from public sources. Herein, 11 different AI/ML algorithms were used to develop the predictive AI/ML models. The linear discriminant analysis (LDA) and random forest (RF) models showed high values of sensitivity and specificity (>0.9) in training/validation series and 3-fold cross validation, respectively. The AI/ML models are able to predict 14 output properties (CC50 (μM), EC50 (μM), inhibition (%), etc.) for all combinations of 54 different NP cores classes vs. 25 different coats and vs. 41 different cell lines, allowing the short listing of the best results for experimental assays. The results of this work may help to reduce the cost of traditional trial and error procedures.

Cancer treatment approaches within the frame of hyperthermia, drug delivery systems, and biosensors: concepts and future potentials

This work presents a review of the therapeutic modalities and approaches for cancer treatment. A brief overview of the traditional treatment routes is presented in the introduction together with their reported side effects. A combination of the traditional approaches was reported to demonstrate an effective therapy until a few decades ago. With the improvement in the fabrication of nanomaterials, targeted therapy represents a novel therapeutic approach. This improvement established on nanoparticles is categorized into hyperthermia, drug delivery systems, and biosensors. Hyperthermia presents a personalized medicine-based approach in which targeted zones are heated up until the diseased tissue is destroyed by the thermal effect. The use of magnetic nanoparticles further improved the effectiveness of hyperthermia owing to the enhanced heating action, further increasing the accuracy of the targeting process. Nanoparticle-based biosensors present a smart nanodevice that can detect, monitor, and target tumor tissues by following the biomarkers in the body fluids. Magnetic nanoparticles offer a controlled thermo-responsive device that can be manipulated by changing the magnetic field, offering a more personalized and controlled hyperthermia therapeutic modality. Similarly, gold nanoparticles offer an effective aid in the hyperthermia treatment approach. Furthermore, carbon nanotubes and metal-organic frameworks present a cutting-edge approach to cancer treatment. A combination of functionalized nanoparticles offers a unique route for drug delivery systems, in which therapeutic agents carried by nanoparticles are guided into the human body and then released in the target spot.

Synthesis, Functionalization, and Biomedical Applications of Iron Oxide Nanoparticles (IONPs)

Iron oxide nanoparticles (IONPs) have garnered significant attention in biomedical applications due to their unique magnetic properties, biocompatibility, and versatility. This review comprehensively examines the synthesis methods, surface functionalization techniques, and diverse biomedical applications of IONPs. Various chemical and physical synthesis techniques, including coprecipitation, sol-gel processes, thermal decomposition, hydrothermal synthesis, and sonochemical routes, are discussed in detail, highlighting their advantages and limitations. Surface functionalization strategies, such as ligand exchange, encapsulation, and silanization, are explored to enhance the biocompatibility and functionality of IONPs. Special emphasis is placed on the role of IONPs in biosensing technologies, where their magnetic and optical properties enable significant advancements, including in surface-enhanced Raman scattering (SERS)-based biosensors, fluorescence biosensors, and field-effect transistor (FET) biosensors. The review explores how IONPs enhance sensitivity and selectivity in detecting biomolecules, demonstrating their potential for point-of-care diagnostics. Additionally, biomedical applications such as magnetic resonance imaging (MRI), targeted drug delivery, tissue engineering, and stem cell tracking are discussed. The challenges and future perspectives in the clinical translation of IONPs are also addressed, emphasizing the need for further research to optimize their properties and ensure safety and efficacy in medical applications. This review aims to provide a comprehensive understanding of the current state and future potential of IONPs in both biosensing and broader biomedical fields.

Synthesis and Characterization of Iron Nanoparticles from a Bioflocculant Produced by Pichia kudriavzevii Isolated from Kombucha Tea SCOBY

The intriguing characteristics of nanoparticles have fueled recent advancement in the field of nanotechnology. In the current study, a microbial-based bioflocculant made from the SCOBY of Kombucha tea broth was purified, profiled, and utilized to biosynthesize iron nanoparticles as a capping and reducing agent. UV-visible absorption spectroscopy, transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), and TGA were used to characterize the Fe nanoparticles. The FT-IR spectra showed functional groups such as hydroxyl, a halogen (C-Br), and carbonyl, and the alkane (C-H) functional groups were present in both samples (bioflocculant and FeNPs) with the exception of the Fe-O bond, which represented the successful biosynthesis of FeNPs. The TEM investigation revealed that the sizes of the produced iron nanoparticles were between 2.6 and 6.2 nm. The UV-vis spectra revealed peaks at 230 nm for the bioflocculant and for the as-fabricated FeNPs, peaks were around 210, 265, and 330 nm, which confirms the formation of FeNPs. X-ray diffraction presented planes (012), (104), (110), (113), (024), (116), and (533) and these planes correspond to 17.17, 32.58, 33.75, 38.18, 45.31, 57.40, and 72.4° at 2Ө. The presence of Fe nanoparticles presented with 0.82 wt% from the EDX spectrum of the biosynthesized FeNPs. However, Fe content was not present from the bioflocculant. SEM images reported cumulus-like particles of the bioflocculant, while that of FeNPs were agglomerated and hexagonal with sizes between 18 and 50 nm. The TGA of FeNPs showed thermal stability by retaining above 60% of its weight at high temperatures. It can therefore be deduced that the purified bioflocculant produced by a yeast Pichia kudraivzevii can be utilized to synthesize FeNPs with the current simple and effective method.

Targeted Delivery of 2D Composite Minerals for Biofilm Removal

Microbiologically influenced corrosion (MIC) poses considerable challenges in various industries, prompting the exploration of advanced materials to mitigate microbial threats. This study successfully synthesized nanoscale vermiculite (VMT) from natural seawater and utilized it as a foundation to integrate magnetic nanoparticles (Fe3O4) and chlorhexidine acetate (CA) for inhibiting MIC. A comprehensive investigation encompassing the synthesis, characterization, and application of these VMT/Fe3O4/CA composites was conducted to evaluate their antimicrobial effectiveness against Escherichia coli, Staphylococcus aureus, and sulfate-reducing bacteria (SRB), demonstrating an efficacy exceeding 99.5%. Moreover, the composite material demonstrated the capability to align with a magnetic field, enabling precise drug targeting and release, thereby facilitating biofilm removal. This research makes a significant contribution to the advancement of intelligent, efficient, and eco-friendly corrosion protection solutions.

Effect of Polymer and Cell Membrane Coatings on Theranostic Applications of Nanoparticles: A Review

The recent decade has witnessed a remarkable surge in the field of nanoparticles, from their synthesis, characterization, and functionalization to diverse applications. At the nanoscale, these particles exhibit distinct physicochemical properties compared to their bulk counterparts, enabling a multitude of applications spanning energy, catalysis, environmental remediation, biomedicine, and beyond. This review focuses on specific nanoparticle categories, including magnetic, gold, silver, and quantum dots (QDs), as well as hybrid variants, specifically tailored for biomedical applications. A comprehensive review and comparison of prevalent chemical, physical, and biological synthesis methods are presented. To enhance biocompatibility and colloidal stability, and facilitate surface modification and cargo/agent loading, nanoparticle surfaces are coated with different synthetic polymers and very recently, cell membrane coatings. The utilization of polymer- or cell membrane-coated nanoparticles opens a wide variety of biomedical applications such as magnetic resonance imaging (MRI), hyperthermia, photothermia, sample enrichment, bioassays, drug delivery, etc. With this review, the goal is to provide a comprehensive toolbox of insights into polymer or cell membrane-coated nanoparticles and their biomedical applications, while also addressing the challenges involved in translating such nanoparticles from laboratory benchtops to in vitro and in vivo applications. Furthermore, perspectives on future trends and developments in this rapidly evolving domain are provided.

In-situ forming Cu-based metal-organic framework in the presence of chitosan-Fe3O4 nanohybrids: A pH-sensitive carrier for controlled release of doxorubicin

In recent years, stimuli-responsive drug delivery systems based on pH, particularly those developed using bio-derived nanocomposite systems, have gained significant attention. In this work, a novel magnetic carrier was designed based on biopolymeric chitosan and metal-organic framework (MOF) for pH-controlling the release of anticancer drugs. To end this, an in-situ green method was performed to form Cu-based MOF in the presence of a magnetic polysaccharide synthesized by precipitation method toward the construction of CS/Fe3O4/Cu-MOF nanocomposite. The nanocomposite was immersed in an aqueous solution of a model anticancer drug, doxorubicin (DOX), and a higher loading capacity (90.1 ± 0.5 %) was achieved. The in-vitro drug release study showed low release rates in simulated physiological environments (pH 7.4, 37 °C, lower than about 20 %), but higher release rates in tumor tissue conditions (pH 4.5, 41 °C, higher than about 60 %) over 96 h, allowing for sustained and extended delivery of DOX. Additionally, the MTT assay demonstrated that the blank and DOX-loaded CS/Fe3O4/Cu-MOF had good cytocompatibility (over 80 % cell viability) and considerable cytotoxicity (lower than 40 % at 16 μg/mL) toward breast cancer (MCF-7) cell line, respectively. These results indicated that the synthesized nanocomposite with suitable pH-sensitivity has potential as a targeted anticancer agent.

Role of metal oxide ferrites in the process of magnetic hyperthermia - A review

Extensive research has been conducted on the manufacturing of nano ferrites, and their use in magnetic hyperthermia therapy has shown promising results in cancer treatment. This study aims primarily to provide an overview of the latest developments in the synthesis of magnetic nanoparticles (MNPs) for the treatment of hyperthermia. Magnetic nanoparticles are biocompatible and have a stable magnetic state, nano ferrites have become recognized as apex thermoseeds in biomedical applications, specifically for the treatment of magnetic hyperthermia. Employing dopant materials, biocompatible overlay, and preparation techniques, one may study the effectiveness of nano ferrites. Furthermore, specific requirements need to be met for using nano ferrites in cancer treatments like magnetic hyperthermia. These include low toxicity, biocompatibility, a higher specific absorption rate, a shorter time to reach the targeted hyperthermia temperature, crystalline size within the biological radius, and a lower dose of the nano ferrite. A potential resolution involves identifying the limitations and proposing enhanced nanocomposite materials that amplify their magnetic characteristics via a biocompatible overlay, all while optimizing the effectiveness and functioning of magnetic nanoferrites. To increase the effectiveness of ferrite nanoparticles in treating hyperthermia, this study will figure out their constraints and offer solutions for more effective ferrite-based nanocomposites that may prove to be a viable therapy option for cancer in the future.

Multifunctional Iron Oxide Nanoparticles as Promising Magnetic Biomaterials in Drug Delivery: A Review

A wide range of applications using functionalized magnetic nanoparticles (MNPs) in biomedical applications, such as in biomedicine as well as in biotechnology, have been extensively expanding over the last years. Their potential is tremendous in delivery and targeting systems due to their advantages in biosubstance binding. By applying magnetic materials-based biomaterials to different organic polymers, highly advanced multifunctional bio-composites with high specificity, efficiency, and optimal bioavailability are designed and implemented in various bio-applications. In modern drug delivery, the importance of a successful therapy depends on the proper targeting of loaded bioactive components to specific sites in the body. MNPs are nanocarrier-based systems that are magnetically guided to specific regions using an external magnetic field. Therefore, MNPs are an excellent tool for different biomedical applications, in the form of imaging agents, sensors, drug delivery targets/vehicles, and diagnostic tools in managing disease therapy. A great contribution was made to improve engineering skills in surgical diagnosis, therapy, and treatment, while the advantages and applicability of MNPs have opened up a large scope of studies. This review highlights MNPs and their synthesis strategies, followed by surface functionalization techniques, which makes them promising magnetic biomaterials in biomedicine, with special emphasis on drug delivery. Mechanism of the delivery system with key factors affecting the drug delivery efficiency using MNPs are discussed, considering their toxicity and limitations as well.

Magnetite-Incorporated 1D Carbon Nanostructure Hybrids for Electromagnetic Interference Shielding

The increasing reliance on electronic technologies has elevated the urgency of effective electromagnetic interference (EMI) shielding materials. This review explores the development and potential of magnetite-incorporated one-dimensional (1D) carbon nanostructure hybrids, focusing on their unique properties and synthesis methods. By combining magnetite's magnetic properties with the electrical conductivity and mechanical strength of carbon nanostructures such as carbon nanotubes (CNTs) and carbon fibers (CFs), these hybrids offer superior EMI shielding performance. Various synthesis techniques, including solvothermal synthesis, in situ growth, and electrostatic self-assembly, are discussed in detail, highlighting their impact on the structure and properties of the resulting composites. This review also addresses the challenges in achieving homogeneous dispersion of nanofillers and the environmental and economic considerations of large-scale production. The hybrid materials' multifunctionality, including enhanced mechanical strength, thermal stability, and environmental resistance, underscores their suitability for advanced applications in aerospace, electronics, and environmental protection. Future research directions focus on optimizing synthesis processes and exploring new hybrid configurations to further improve electromagnetic properties and practical applicability.

Magnetic hyperthermia in cancer therapy, mechanisms, and recent advances: A review

Hyperthermia therapy refers to the elevating of a region in the body for therapeutic purposes. Different techniques have been applied for hyperthermia therapy including laser, microwave, radiofrequency, ultrasonic, and magnetic nanoparticles and the latter have received great attention in recent years. Magnetic hyperthermia in cancer therapy aims to increase the temperature of the body tissue by locally delivering heat from the magnetic nanoparticles to cancer cells with the aid of an external alternating magnetic field to kill the cancerous cells or prevent their further growth. This review introduces magnetic hyperthermia with magnetic nanoparticles. It includes the mechanism of the operation and magnetism behind the magnetic hyperthermia phenomenon. Different synthesis methods and surface modification to enhance the biocompatibility, water solubility, and stability of the nanoparticles in physiological environments have been discussed. Recent research on versatile types of magnetic nanoparticles with their ability to increase the local temperature has been addressed.

Histidine modified Fe3O4 nanoparticles improving the ethanol yield and tolerance of Saccharomyces cerevisiae

Saccharomyces cerevisiae, the primary microorganism involved in ethanol production, is hindered by the accumulation of ethanol, leading to reduced ethanol production. In this study, we employed histidine-modified Fe3O4 nanoparticles (His-Fe3O4) for the first time, to the best of our knowledge, as a method to enhance ethanol yield during the S. cerevisiae fermentation process. The results demonstrated that exposing S. cerevisiae cells to Fe3O4 nanoparticles (Fe3O4 NPs) led to increased cell proliferation and glucose consumption. Moreover, the introduction of His-Fe3O4 significantly boosted ethanol content by 17.3% (p < 0.05) during fermentation. Subsequent findings indicated that the increase in ethanol content was associated with enhanced ethanol tolerance and improved electron transport efficiency. This study provided evidence for the positive effects of His-Fe3O4 on S. cerevisiae cells and proposed a straightforward approach to enhance ethanol production in S. cerevisiae fermentation. The mediation of improved ethanol tolerance offers significant potential in the fermentation and bioenergy sectors.

Potential magnetic drug targeting with magnetite nanoparticles in cancer treatment by enhancer-modifier natural herb and loaded drug

In the present study, we prepared magnetite nanoparticles (MNPs) loaded with natural Moringa oleifera (M. olf) herb and Epilim (Ep) drug to evaluate the anti-cancerous activity against brain cancer cells. All the samples were prepared via co-precipitation approach modified with different concentrations of M. olf and Ep drug at room temperature. The MNPs loaded with drug and natural herb were studied in terms of crystal structure, morphology, colloidal stability, size distribution, and magnetic properties. Field emission scanning electron microscopy (FESEM) images exhibited the morphologies of samples with spherical shape as well as the particles size of 9 nm for MNPs and up to 23 nm for its composites. The results of vibrating sample magnetometer (VSM) indicated the magnetization saturation (Ms) of 42.510 emu/g for MNPs. This value reduced to 16-35 emu/g upon loading MNPs with different concentrations of M. olf and Ep. Fourier transform infrared spectroscopy (FTIR) indicated the chemical interaction between the Ep, M.olf and MNPs. Brunauer-Emmett-Teller (BET) analysis confirmed the largest surface area for MNPs (422.61 m2/g) which gradually reduced on addition of M. olf and Ep indicating the successful loading. The zeta potential measurements indicated that the MNPs and MNPs loaded with M. olf and Ep are negatively charged and can be dispersed in the suspension. Furthermore, U87 human glioblastoma cell line was used for the in vitro cellular studies to determine the efficacy of synthesized MNPs against cancer cells. The results confirmed the anti-proliferative activity of the MNPs loaded with M. olf and Ep.

MOFs for next-generation cancer therapeutics through a biophysical approach-a review

Metal-organic frameworks (MOFs) have emerged as promising nanocarriers for cancer treatment due to their unique properties. Featuring high porosity, extensive surface area, chemical stability, and good biocompatibility, MOFs are ideal for efficient drug delivery, targeted therapy, and controlled release. They can be designed to target specific cellular organelles to disrupt metabolic processes in cancer cells. Additionally, functionalization with enzymes mimics their catalytic activity, enhancing photodynamic therapy and overcoming apoptosis resistance in cancer cells. The controllable and regular structure of MOFs, along with their tumor microenvironment responsiveness, make them promising nanocarriers for anticancer drugs. These carriers can effectively deliver a wide range of drugs with improved bioavailability, controlled release rate, and targeted delivery efficiency compared to alternatives. In this article, we review both experimental and computational studies focusing on the interaction between MOFs and drug, explicating the release mechanisms and stability in physiological conditions. Notably, we explore the relationship between MOF structure and its ability to damage cancer cells, elucidating why MOFs are excellent candidates for bio-applicability. By understanding the problem and exploring potential solutions, this review provides insights into the future directions for harnessing the full potential of MOFs, ultimately leading to improved therapeutic outcomes in cancer treatment.

Transferrin-conjugated magnetic nanoparticles for the isolation of brain-derived blood exosomal MicroRNAs: A novel approach for Parkinson's disease diagnosis

BACKGROUND

Brain-derived exosomes circulate in the bloodstream and other bodily fluids, serving as potential indicators of neurological disease progression. These exosomes present a promising avenue for the early and precise diagnosis of neurodegenerative conditions. Notably, miRNAs found in plasma extracellular vesicles (EVs) offer distinct diagnostic benefits due to their stability, abundance, and resistance to breakdown.

RESULTS

In this study, we introduce a method using transferrin conjugated magnetic nanoparticles (TMNs) to isolate these exosomes from the plasma of patients with neurological disorders. This TMNs technique is both quick (<35 min) and cost-effective, requiring no high-priced ingredients or elaborate equipment for EV extraction. Our method successfully isolated EVs from 33 human plasma samples, including those from patients with Parkinson's disease (PD), Multiple Sclerosis (MS), and Dementia. Using quantitative polymerase chain reaction (PCR) analysis, we evaluated the potential of 8 exosomal miRNA profiles as biomarker candidates. Six exosomal miRNA biomarkers (miR-195-5p, miR-495-3p, miR-23b-3P, miR-30c-2-3p, miR-323a-3p, and miR-27a-3p) were consistently linked with all stages of PD.

SIGNIFICANCE

The TMNs method provides a practical, cost-efficient way to isolate EVs from biological samples, paving the way for non-invasive neurological diagnoses. Furthermore, the identified miRNA biomarkers in these exosomes may emerge as innovative tools for precise diagnosis in neurological disorders including PD.

Magnetic nanoparticles: An emerging nanomedicine for cancer immunotherapy

Cancer immunotherapy is a revolutionised strategy that strikingly improves cancer treatment in recent years. However, like other therapeutic modalities, immunotherapy faces several challenges and limitations. Many methods have been developed to overcome those limitations; thus, nanomedicine is one of the emerging fields with a highly promising application. Magnetite nanoparticles (MNPs) have long been used for medical applications, for example, as a contrast medium, and are being investigated as a tool for boosting and synergizing the effects of immunotherapy. With known physicochemical properties and the interaction with the surroundings in biological systems, MNPs are used to improve the efficacy of immunotherapy in both cell-based and antibody-based treatment. This chapter reviews and discusses state-of-the-art MNPs as a tool to advance cancer immunotherapy as well as its limitations that need further investigation for a better therapeutic outcome in preclinical and clinical settings.

Magnetite nanoparticles: an emerging adjunctive tool for the improvement of cancer immunotherapy

Cancer immunotherapy has emerged as a groundbreaking field, offering promising and transformative tools for oncological research and treatment. However, it faces several limitations, including variations in cancer types, dependence on the tumor microenvironments (TMEs), immune cell exhaustion, and adverse reactions. Magnetic nanoparticles, particularly magnetite nanoparticles (MNPs), with established pharmacodynamics and pharmacokinetics for clinical use, hold great promise in this context and are now being explored for therapeutic aims. Numerous preclinical studies have illustrated their efficacy in enhancing immunotherapy through various strategies, such as modulating leukocyte functions, creating favorable TMEs for cytotoxic T lymphocytes, combining with monoclonal antibodies, and stimulating the immune response via magnetic hyperthermia (MHT) treatment (Front Immunol. 2021;12:701485. doi: 10.3389/fimmu.2021.701485). However, the current clinical trials of MNPs are mostly for diagnostic aims and as a tool for generating hyperthermia for tumor ablation. With concerns about the adverse effects of MNPs in the in vivo systems, clinical translation and clinical study of MNP-boosted immunotherapy remains limited. The lack of extensive clinical investigations poses a current barrier to patient application. Urgent efforts are needed to ascertain both the efficacy of MNP-enhanced immunotherapy and its safety profile in combination therapy. This article reviews the roles, potential, and challenges of using MNPs in advancing cancer immunotherapy. The application of MNPs in boosting immunotherapy, and its perspective role in research and development is also discussed.

Efficient removal of sertraline hydrochloride from wastewater using banana peels functionalized: performance adsorption, mechanisms and applicability

The presence of sertraline hydrochloride (SER) has been detected in water bodies and wastewater, which encourages the search for alternative treatments for its control and removal. Agro-industrial residues are considered efficient adsorbents and functionalization with magnetic nanoparticles improve the adsorptive properties of these materials, in addition to facilitating their separation from a fluid by an external magnetic field. Thus, this study developed and characterized a new material via the functionalization of the banana peel with iron oxide nanoparticles (BANFunc) for the adsorption of SER in batch experiments. Physicochemical and spectroscopic techniques indicated that the BANFunc functionalization method was effective and improved the adsorption capacity (0.68 and 39.96 mg g-1 for BANPure and BANFunc, respectively). The adsorption studies revealed a maximum adsorptive capacity of 142.85 mg g-1 at 240 min and 318 K. Furthermore, the process presented spontaneous and endothermic behaviour, with a better fit to the pseudo-first-order and Langmuir models for the kinetic and isothermal, respectively. The reuse of the biosorbent was effective for five cycles, and even in the 3rd cycle, the adsorbent showed more than 80% SER removal. The adsorption process can be explained by hydrogen bonds and π-interactions. In the synthetic mixture treatment, the biosorbent demonstrated a satisfactory removal rate, of 86.91%, and individual removals of 83.23%, 89.36% and 88.15% for SER, safranine orange and chloroquine, respectively. Therefore, BANFunc is a promising material for large-scale applications, considering its sustainable character and high treatment efficiency.

Photocatalytic Degradation of Organic Pollutants-Nile Blue, Methylene Blue, and Bentazon Herbicide-Using NiO-ZnO Nanocomposite

Water pollution poses a significant threat to both human health and ecosystem integrity. Chemical pollutants such as dyes and pesticides affect the water quality and endanger aquatic life. Among the methods for water purification from organic pollutants, photodegradation is certainly a valid technique to decrease such contaminants. In this work, pristine NiO, ZnO, and NiO-ZnO photocatalysts were synthesized by the homogeneous co-precipitation method. X-ray diffraction confirms the formation of a photocatalyst consisting of ZnO (Hexagonal) and NiO (Cubic) structures. The crystalline size was calculated by the Scherrer formula, which is 19 nm for the NiO-ZnO photocatalyst. The band gap measurements of the prepared samples were obtained using the Tauc Plot, equation which is 2.93 eV, 3.35 eV and 2.63 eV for NiO, ZnO, and NiO-ZnO photocatalysts, respectively. The photocatalytic performance of NiO-ZnO nanocomposite was evaluated through the degradation of Methylene Blue and Nile Blue dyes under sunlight, and Bentazon herbicide under a UV light. Photocatalyst degradation efficiency was 95% and 97% for Methylene Blue and Nile Blue in 220 min under sunlight while a degradation of 70% for Bentazon after 100 min under UV light source was found.

Effect of Synthesis Conditions on CuO-NiO Nanocomposites Synthesized via Saponin-Green/Microwave Assisted-Hydrothermal Method

This work presents the synthesis of CuO-NiO nanocomposites under different synthesis conditions. Nanocomposites were synthesized by merging a green synthesis process with a microwave-assisted hydrothermal method. The synthesis conditions were as follows: concentration of the metal precursors (0.05, 0.1, and 0.2 M), pH (9, 10, and 11), synthesis temperature (150 °C, 200 °C, and 250 °C), microwave treatment time (15, 30, and 45 min), and extract concentration (20 and 40 mL of 1 g saponin/10 mL water, and 30 mL of 2 g saponin/10 mL water). The phases and crystallite sizes of the calcined nanocomposites were characterized using XRD and band gap via UV-Vis spectroscopy, and their morphologies were investigated using SEM and TEM. The XRD results confirmed the formation of a face-centered cubic phase for nickel oxide, while copper oxide has a monoclinic phase. The calculated crystallite size was in the range of 29-39 nm. The direct band gaps of the samples prepared in this work were in the range of 2.39-3.17 eV.

Laponite for biomedical applications: An ophthalmological perspective

Clay minerals have been applied in biomedicine for thousands of years. Laponite is a nanostructured synthetic clay with the capacity to retain and progressively release drugs. In recent years there has been a resurgence of interest in Laponite application in various biomedical areas. This is the first paper to review the potential biomedical applications of Laponite in ophthalmology. The introduction briefly covers the physical, chemical, rheological, and biocompatibility features of different routes of administration. After that, emphasis is placed on 1) drug delivery for antibiotics, anti-inflammatories, growth factors, other proteins, and cancer treatment; 2) bleeding prevention or treatment; and 3) tissue engineering through regenerative medicine using scaffolds in intraocular and extraocular tissue. Although most scientific research is not performed on the eye, both the findings and the new treatments resulting from that research are potentially applicable in ophthalmology since many of the drugs used are the same, the tissue evaluated in vitro or in vivo is also present in the eye, and the pathologies treated also occur in the eye. Finally, future prospects for this emerging field are discussed.

A Preliminary Report Regarding the Morphological Changes of Nano-Enabled Pharmaceutical Formulation on Human Lung Carcinoma Monolayer and 3D Bronchial Microtissue

Background and Objectives: Nowadays, the development of enabled pharmaceutical nanoparticles of solid lipid type is continuously growing, because they have the potential to be used for targeted drug release leading to an increased effect of chemotherapy, being used in lung cancer nano-diagnosis and nano-therapy. The current study reports the preliminary results obtained regarding the biological effect of a new nano-enabled pharmaceutical formulation in terms of its cytotoxic and biosafety profile. Materials and Methods: The pharmaceutical formulations consist of solid lipid nanoparticles (SLN) obtained via the emulsification-diffusion method by loading green iron oxide nanoparticles (green-IONPs) with a pentacyclic triterpene (oleanolic acid-OA). Further, a complex biological assessment was performed, employing three-dimensional (3D) bronchial microtissues (EpiAirwayTM) to determine the biosafety profile of the SLN samples. The cytotoxic potential of the samples was evaluated on human lung carcinoma, using an in vitro model (A549 human lung carcinoma monolayer). Results: The data revealed that the A549 cell line was strongly affected after treatment with SLN samples, especially those that contained OA-loaded green-IONPs obtained with Ocimum basilicum extract (under 30% viability rates). The biosafety profile investigation of the 3D normal in vitro bronchial model showed that all the SLN samples negatively affected the viability of the bronchial microtissues (below 50%). As regards the morphological changes, all the samples induce major changes such as loss of the surface epithelium integrity, loss of epithelial junctions, loss of cilia, hyperkeratosis, and cell death caused by apoptosis. Conclusions: In summary, the culprit for the negative impact on viability and morphology of 3D normal bronchial microtissues could be the too-high dose (500 µg/mL) of the SLN sample used. Nevertheless, further adjustments in the SLN synthesis process and another complex in vitro evaluation will be considered for future research.

A novel digitonin/graphene oxide/iron oxide nanocomposite: synthesis, physiochemical characterization and antioxidant activity

In this work, iron oxide (Fe3O4) magnetic nanoparticles (MNPs) and graphene oxide (GO) nanosheets were prepared via the co-precipitation technique and the Modified Hummer method. Fe3O4 MNPs and GO nanosheets were combined to prepare Fe3O4/GO nanocomposite and subsequently conjugated with Digitonin (DIG) in order to obtain a dual-targeted delivery system based on DIG/Fe3O4/GO nanocomposite. SEM images reveal the presence of Fe3O4 MNPs at a scale of 100 nm, exhibiting dispersion between the GO nanosheets. Aggregation of the DIG/Fe3O4/GO nanocomposite was observed at various size scales. The XRD structural analysis confirms the crystal structure of the prepared samples. The Fe3O4 MNPs demonstrated the main XRD-diffracted peaks. Also, GO nanosheets exhibit crystalline characteristics on the (001) and (002) planes. The predominant peaks observed in the DIG/GO/Fe3O4 nanocomposite are attributed to the crystal phases of Fe3O4 MNPs. The FT-IR vibrational modes observed in the GO/DIG/Fe3O4 nanocomposite indicate the presence of crosslinking between GO nanosheet layers and the Fe3O4 MNPs. The antioxidant activity of the prepared samples was measured and the DIG/GO/Fe3O4 nanocomposite demonstrated a significantly high antioxidant activity in both 2-diphenyl-1-picrylhydrazyl (DPPH·) and 2,2-azino-bis-3-ethylbenzthiazoline-6-sulfonic acid (ABTS·+) tests.

Evaluation of Cr(VI) Removal from Tanning Effluents Using Magnetic Nanoparticles of Fe3O4 Synthesized with Olea europaea Bone Extract

The tanning industry generates effluents with high chromium content, which require treatment prior to discharge into the sewage system. This article explores the use of magnetic magnetite nanoparticles (MNPs) to remove Cr(VI) from aqueous solutions, such as tanning effluents. The MNPs were synthesized by coprecipitation reaction using the Olea europaea extract as a reducing agent. Subsequently, they were characterized by dynamic light scattering spectroscopy (DLS), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). MNPs with irregular morphology and diameters ranging from 73.28 to 162.90 nm were obtained. Cr(VI) removal was performed using jar test methodology, and its efficiency was evaluated in the laboratory for different initial Cr(VI) (mg/L) concentration and nanoparticle (g/L) concentration. A kinetic study was developed and indicated that the equilibrium adsorption mechanism corresponds to a pseudo-second-order model. Furthermore, the isotherm analysis revealed that chromium adsorption best fits the Langmuir isotherm. Finally, Cr(VI) removal rates from 85% to 100% were achieved in tanning and retanning effluents.

Nanobiomaterials: exploring mechanistic roles in combating microbial infections and cancer

The initiation of the "nanotechnology era" within the past decade has been prominently marked by advancements in biomaterials. This intersection has opened up numerous possibilities for enhancing the detection, diagnosis, and treatment of various illnesses by leveraging the synergy between biomaterials and nanotechnology. The term "nano biomaterials" referring to biomaterials featuring constituent or surface feature sizes below 100 nm, presents a realm of extraordinary materials endowed with unique structures and properties. Beyond addressing common biomedical challenges, these nano biomaterials contribute unprecedented insights and principles that enrich our understanding of biology, medicine, and materials science. A critical evaluation of recent technological progress in employing biomaterials in medicine is essential, along with an exploration of potential future trends. Nanotechnology breakthroughs have yielded novel surfaces, materials, and configurations with notable applications in the biomedical domain. The integration of nanotechnology has already begun to enhance traditional biomedical practices across diverse fields such as tissue engineering, intelligent systems, the utilization of nanocomposites in implant design, controlled release systems, biosensors, and more. This mini review encapsulates insights into biomaterials, encompassing their types, synthesis methods, and the roles of organic and inorganic nanoparticles, elucidating their mechanisms of action. Furthermore, the focus is squarely placed on nano biomaterials and their versatile applications, with a particular emphasis on their roles in anticancer and antimicrobial interventions. This review underscores the dynamic landscape of nanotechnology, envisioning a future where nano biomaterials play a pivotal role in advancing medical applications, particularly in combating cancer and microbial infections.

Green Synthesis of Gold, Silver, Copper, and Magnetite Particles Using Poly(tartaric acid) Simultaneously as Coating and Reductant

Poly(tartaric acid) is a relatively recently described polymer that can be easily synthesized and scaled up from a readily available renewable material (tartaric acid). This article demonstrates its use in a green synthesis of gold nanoparticles, silver nanoparticles, copper particles, and magnetite nanoparticles. In this case poly(tartaric acid) acts both as a reductant and as a coating agent. To our knowledge this is the first green synthesis of several different types of nanoparticles using only one reagent (polytartrate) as both reductant and coating. The resulting particles were analyzed by XRD, TEM/SEM, EDX, FTIR, DLS, zeta-potential, XPS, and UV/VIS spectroscopy. Preliminary studies of the thermal behavior of mixtures of different types of particles with poly(tartaric acid) were also conducted. The obtained particles show different sizes depending on the material, and the coating allows for better dispersibility as well as potential further functionalization, making them potentially useful also for other applications, besides the inclusion in polymer composites.

Design, characterization and green synthesis of samarium-decorated magnetic Fe3O4 nanoparticles: cytotoxicity and DNA binding studies

In this study, we have successfully synthesized magnetic Fe3O4 nanoparticles adorned with samarium (Sm-MNPs) utilizing ginger extract for the very first time. Furthermore, a comprehensive characterization of the nanoparticles along with an exploration of their physicochemical attributes was conducted. The biological functionalities of the synthesized nanoparticles were investigated through a thorough examination of their interaction with calf thymus DNA (ctDNA) using diverse spectroscopic techniques encompassing ultraviolet-visible (UV-Vis) and fluorescence spectroscopy at varying temperatures. Subsequently, we evaluated the cytotoxicity of the magnetic nanoparticles using a colorectal cancer cell model (HCT116 cells) and a tetrazolium colorimetric assay (MTT assay). The characterization of the ginger extract-coated magnetic nanoparticles (ginger-Sm-MNPs) revealed their superparamagnetic nature, nanocrystalline structure, spherical morphology, hydrodynamic size of 155 nm, and uniform distribution. The outcomes from UV-Vis and fluorescence spectroscopy affirmed the binding of ginger-Sm-MNPs with ctDNA. Additionally, the MTT assay demonstrated that the cytotoxicity of ginger-Sm-MNPs surpassed that of both magnetite nanoparticles and ginger extract. Notably, the inhibitory concentrations (IC50) for the green-synthesized nanoparticles after 24 and 48 h of incubation were determined as 198.1 and 135.8 μg/mL, respectively. In conclusion, our study findings suggest the potential utility of ginger-Sm-MNPs as a promising candidate for various biomedical applications.Communicated by Ramaswamy H. Sarma.

Green synthesis of biocompatible Fe3O4 magnetic nanoparticles using Citrus Sinensis peels extract for their biological activities and magnetic-hyperthermia applications

Green synthesis of nanoparticles (NPs) is eco-friendly, biocompatible, cost-effective, and highly stable. In the present study, Citrus sinensis peel extract was utilized to the fabrication of superparamagnetic iron oxide nanoparticles (SPIONs). The fabricated SPIONs were first characterized using UV-Visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM). The UV-Vis spectra analysis displayed a peak at 259 nm due to the surface plasmon resonance. The FTIR spectrum showed bands at 3306 cm-1, and 1616 cm-1 revealed the protein's involvement in the development and capping of NPs. TEM analysis indicated that green synthesized SPIONs were spherical in shape with particle size of 20-24 nm. Magnetization measurements indicate that the synthesized SPIONs exhibited superparamagnetic behavior at room temperature. The antimicrobial activity, minimum inhibitory concentration (MIC), antioxidant potential, anti-inflammatory effect, and catalytic degradation of methylene blue by SPIONs were investigated in this study. Results demonstrated that SPIONs had variable antimicrobial effect against different pathogenic multi-drug resistant bacteria. At the highest concentration (400 μg/mL), SPIONs showed inhibition zones (14.7-37.3 mm) against all the target isolates. Furthermore, the MIC of synthesized SPIONs against Staphylococcus aureus, Streptococcus mutans, Bacillus subtilis, Escherichia coli, Klebsiella pneumonia, and Candida albicans were 3, 6.5, 6.5, 12.5, 50, 25 μg/mL, respectively. SPIONs exhibited strong antioxidant, anti-inflammatory, and catalytic dye degradation activities. Interestingly, Fe3O4 SPIONs shows optimum magnetic hyperthermia (MHT) techniques under an alternating magnetic field (AMF) measured in specific absorption rate (SAR) of 164, 230, and 286 W/g at concentrations 1, 5, and 10 mg/mL, respectively. Additionally, these newly fabricated SPIONs virtually achieve significant execution under the AMF in fluid MHT and are suitable for biomedical applications.

A copper(ii) complex containing pyridine-2-carbaldehyde and its direct binding onto ethylenediamine functionalized with Fe3O4@SiO2 nanoparticles for catalytic applications

In the present study, a copper(ii) complex containing a pyridine-2-carbaldehyde ligand and its direct binding onto ethylenediamine functionalized with Fe3O4@SiO2 nanoparticles [Cu(ii)-Schiff base-(CH2)3-SiO2@Fe3O4] as a heterogeneous magnetic nanocatalyst can be easily prepared using a multi-step method. Next, the structural and magnetic properties of the synthesized nanoparticles were identified using Fourier-transform infrared spectroscopy (FT-IR), inductively coupled plasma (ICP), vibrating-sample magnetometry (VSM), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM), thermogravimetric analysis (TGA), PXRD (Powder X-ray diffraction), Brunauer-Emmett-Teller (BET), and energy-dispersive X-ray spectrometry (EDX) techniques. TEM images reveal that the average particle size distribution was found to be in the range of 45-55 nm with spherical shape. The PXRD analysis indicated that the crystallite size was found to be 35.2 nm. The synthesized nanocatalyst exhibited a very good catalytic ability in the synthesis reaction of pyran derivatives and 2-benzylidenemalononitrile derivatives. Product 2-amino-7,7-dimethyl-4-(4-nitrophenyl)-5-oxo-5,6,7,8-tetrahydrobenzo[b]pyran 4e was achieved in 97% yield with a TON of 129.3 and a TOF of 646.6 h-1 and product 2-(4-cyanobenzylidene)malononitrile 3j was achieved in 96% yield with a TON of 128 and a TOF of 984.6 h-1. In addition, the synthesized nanocatalyst was easily separated from the reaction mixture by a magnet and used 7 consecutive times without significant loss of catalytic activity. Also, leaching of copper metal from the synthesized nanocatalyst was very insignificant for this reaction.

Efficient biodechlorination at the Fe3O4-based silicone powder modified chlorobenzene-affinity anode

The treatment of chlorinated volatile organic compounds faces challenges of secondary pollution and less-efficiency due to the substitution of chlorine. Microbial fuel cells (MFCs) provide a promising opportunity for its abatement. In this study, a novel Fe3O4 nanoparticles and silicone-based powder (SP) were integrated and immobilized on carbon felt (CF+Fe3O4@SP), which was further used as anode in the chlorobenzene (CB) powered MFC. Owing to the cooperation between SP and Fe3O4, the anode exhibited excellent performance for both biodechlorination and power generation. The results indicated that the CF+Fe3O4@SP anode loaded MFC achieved 98.5% removal of 200 mg/L CB within 28 h, and the maximum power density was 675.9 mW/m3, which was a 45.6% increase compared to that of the bare CF anode. Microbial community analysis indicated that the genera Comamonadaceae, Pandoraea, Obscuribacteraceae, and Truepera were dominated, especially, the Comamonadaceae and Obscuribacteraceae showed outstanding affinity for Fe3O4 and SP, respectively. Moreover, the proportion of live bacteria, secretion of extracellular polymer substances, and protein content in the extracellular polymer substances were significantly increased by modifying Fe3O4@SP onto the carbon-based anode. Thus, this study provides new insights into the development of MFCs for refractory and hydrophobic volatile organic compounds removal.

Recent advances of magnetic chitosan hydrogel: Preparation, properties and applications

Magnetic chitosan hydrogels are organic-inorganic composite material with the characteristics of both magnetic materials and natural polysaccharides. Due to its biocompatibility, low toxicity and biodegradability, chitosan, a natural polymer has been widely used for preparing magnetic hydrogels. The addition of magnetic nanoparticles to chitosan hydrogels not only improves their mechanical strength, but also endows them with magnetic thermal effects, targeting capabilities, magnetically-sensitive release characteristics, easy separation and recovery, thus enabling them to be used in various applications including drug delivery, magnetic resonance imaging, magnetothermal therapy, and adsorption of heavy metals and dyes. In this review, the physical and chemical crosslinking methods of chitosan hydrogels and the methods for binding magnetic nanoparticles in hydrogel networks are first introduced. Subsequently, the properties of magnetic chitosan hydrogels were summarized including mechanical properties, self-healing, pH responsiveness and properties in magnetic fields. Finally, the potential for further technological and applicative advancements of magnetic chitosan hydrogels is discussed.

Direct Polyphenol Attachment on the Surfaces of Magnetite Nanoparticles, Using Vitis vinifera, Vaccinium corymbosum, or Punica granatum

This study presents an alternative approach to directly synthesizing magnetite nanoparticles (MNPs) in the presence of Vitis vinifera, Vaccinium corymbosum, and Punica granatum derived from natural sources (grapes, blueberries, and pomegranates, respectively). A modified co-precipitation method that combines phytochemical techniques was developed to produce semispherical MNPs that range in size from 7.7 to 8.8 nm and are coated with a ~1.5 nm thick layer of polyphenols. The observed structure, composition, and surface properties of the MNPs@polyphenols demonstrated the dual functionality of the phenolic groups as both reducing agents and capping molecules that are bonding with Fe ions on the surfaces of the MNPs via -OH groups. Magnetic force microscopy images revealed the uniaxial orientation of single magnetic domains (SMDs) associated with the inverse spinel structure of the magnetite (Fe3O4). The samples' inductive heating (H0 = 28.9 kA/m, f = 764 kHz), measured via the specific loss power (SLP) of the samples, yielded values of up to 187.2 W/g and showed the influence of the average particle size. A cell viability assessment was conducted via the MTT and NRu tests to estimate the metabolic and lysosomal activities of the MNPs@polyphenols in K562 (chronic myelogenous leukemia, ATCC) cells.

Collagen Biocomposites Derived from Fish Waste: Doped and Cross-Linked with Functionalized Fe3O4 Nanoparticles and Their Comparative Studies with a Green Approach

Collagen-based nanobiocomposites can reabsorb and are biodegradable. These properties are effectively controlled by the number of cross-links. This study demonstrates an effortless and proficient approach for the functionalization of Fe₃O₄ NPs for cross-linking collagen obtained from biowaste, viz., fish scales of Lates Calcarifer, a marine origin. The size of Fe₃O₄ NPs (10-40 nm) was confirmed using particle size analysis. The physico-chemical properties of the aminosilane-coated Fe₃O₄ NPs cross-linked via succinylated collagen (FFCSC) were characterized using different analytical techniques and compared with succinylated collagen doped with Fe₃O₄ NPs (FDSC). Thermogravimetric analysis indicates cross-linked product FFCSC to be more stable than the FDSC. Also, the antibacterial effect was more pronounced for FFCSC than for FDSC nanobiocomposites. FFCSC exhibited improved mechanical properties which are essential for materials used for wound dressing purposes. Moreover, the cell viability of fibroblasts (3T3-L1) and their morphology studied by SEM and fluorescence microscopy showed biocompatibility of both FDSC and FFCSC. Thus, the current investigation, involves a waste to wealth approach where the collagen-based nanobiocomposites present an easy way to recycle the biowaste to value-added products using simple and clean methods, which are suitable for use in biomedical and environmental applications.

How Magnetic Composites are Effective Anticancer Therapeutics? A Comprehensive Review of the Literature

Chemotherapy is the most prominent route in cancer therapy for prolonging the lifespan of cancer patients. However, its non-target specificity and the resulting off-target cytotoxicities have been reported. Recent in vitro and in vivo studies using magnetic nanocomposites (MNCs) for magnetothermal chemotherapy may potentially improve the therapeutic outcome by increasing the target selectivity. In this review, magnetic hyperthermia therapy and magnetic targeting using drug-loaded MNCs are revisited, focusing on magnetism, the fabrication and structures of magnetic nanoparticles, surface modifications, biocompatible coating, shape, size, and other important physicochemical properties of MNCs, along with the parameters of the hyperthermia therapy and external magnetic field. Due to the limited drug-loading capacity and low biocompatibility, the use of magnetic nanoparticles (MNPs) as drug delivery system has lost traction. In contrast, MNCs show higher biocompatibility, multifunctional physicochemical properties, high drug encapsulation, and multi-stages of controlled release for localized synergistic chemo-thermotherapy. Further, combining various forms of magnetic cores and pH-sensitive coating agents can generate a more robust pH, magneto, and thermo-responsive drug delivery system. Thus, MNCs are ideal candidate as smart and remotely guided drug delivery system due to a) their magneto effects and guide-ability by the external magnetic fields, b) on-demand drug release performance, and c) thermo-chemosensitization under an applied alternating magnetic field where the tumor is selectively incinerated without harming surrounding non-tumor tissues. Given the important effects of synthesis methods, surface modifications, and coating of MNCs on their anticancer properties, we reviewed the most recent studies on magnetic hyperthermia, targeted drug delivery systems in cancer therapy, and magnetothermal chemotherapy to provide insights on the current development of MNC-based anticancer nanocarrier.

Green synthesis of biocompatible Fe 3 O 4 magnetic nanoparticles using Citrus Sinensis peels extract for their biological activities and magnetic- hyperthermia applications.. [DOI: 10.21203/rs.3.rs-3010022/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Plants include active chemicals known as phytochemicals and biomolecules that serve as decreasing and biostability factors for nanoparticle (NP) creation. Citrus Sinensis peels are rich in phenolics, flavonoids, antioxidants, and biophysical benefits. Herein, we prepared superparamagnetic iron oxide nanoparticles (SPIONs) by co-precipitation using Citrus Sinensis peel extract as a novel green synthesis method. The antioxidant, anti-inflammatory, dye degradation activities, and antimicrobial activities of Fe3O4 MNPs were investigated. Furthermore, the produced materials were characterized using FTIR, UV, TEM, VSM, and XRD analysis. The Fe3O4 MNPs showed higher antibacterial activities against multi antibiotic resistant bacterial strains: Escherichia coli, Streptococcus mutans, Candida albicans, Staphylococcus aureus, Bacillus subtilis, and Klebsiella pneumonia. The sample has generated a lot of attention in the scientific community for magnetic hyperthermia (MHT) applications. The maximum value of the specific absorption rate (SAR) was evaluated at sample concentrations of 10mg under the magnetic field condition. Additionally, these newly fabricated SPIONs virtually achieve significant execution under the alternating magnetic field (AMF) in fluid HT and are suitable for biomedical applications.

Hyaluronic Acid Modified Metal Nanoparticles and Their Derived Substituents for Cancer Therapy: A Review

The use of metal nanoparticles (M-NPs) in cancer therapy has gained significant consideration owing to their exceptional physical and chemical features. However, due to the limitations, such as specificity and toxicity towards healthy cells, their application in clinical translations has been restricted. Hyaluronic acid (HA), a biocompatible and biodegradable polysaccharide, has been extensively used as a targeting moiety, due to its ability to selectively bind to the CD44 receptors overexpressed on cancer cells. The HA-modified M-NPs have demonstrated promising results in improving specificity and efficacy in cancer therapy. This review discusses the significance of nanotechnology, the state of cancers, and the functions of HA-modified M-NPs, and other substituents in cancer therapy applications. Additionally, the role of various types of selected noble and non-noble M-NPs used in cancer therapy are described, along with the mechanisms involved in cancer targeting. Additionally, the purpose of HA, its sources and production processes, as well as its chemical and biological properties are described. In-depth explanations are provided about the contemporary applications of HA-modified noble and non-noble M-NPs and other substituents in cancer therapy. Furthermore, potential obstacles in optimizing HA-modified M-NPs, in terms of clinical translations, are discussed, followed by a conclusion and future prospects.

Progress in the Mechanism of the Effect of Fe3O4 Nanomaterials on Ferroptosis in Tumor Cells

Ferroptosis is a new form of iron-dependent programmed cell death discovered in recent years, which is caused by the accumulation of lipid peroxidation (LPO) and reactive oxygen species (ROS). Recent studies have shown that cellular ferroptosis is closely related to tumor progression, and the induction of ferroptosis is a new means to inhibit tumor growth. Biocompatible Fe₃O₄ nanoparticles (Fe₃O₄-NPs), rich in Fe²⁺ and Fe³⁺, act as a supplier of iron ions, which not only promote ROS production but also participate in iron metabolism, thus affecting cellular ferroptosis. In addition, Fe₃O₄-NPs combine with other techniques such as photodynamic therapy (PDT); heat stress and sonodynamic therapy (SDT) can further induce cellular ferroptosis effects, which then enhance the antitumor effects. In this paper, we present the research progress and the mechanism of Fe₃O₄-NPs to induce ferroptosis in tumor cells from the perspective of related genes and chemotherapeutic drugs, as well as PDT, heat stress, and SDT techniques.

Design and preparation of amino-functionalized core-shell magnetic nanoparticles for photocatalytic application and investigation of cytotoxicity effects

The goal of the current paper was a synthesis of Amino-functionalized Fe3O4@SiO2 core-shell magnetic nanoparticles as a unique efficient photocatalyst for removing organic dyes from aqueous environments. The magnetic Fe3O4@SiO2 core-shell was produced by a silica source to avoid aggregation by the co-precipitation method. Next, functionalized by using 3-Aminopropyltriethoxysilane (APTES) via a post-synthesis link. The chemical structure, magnetic properties, and shape of the manufactured photocatalyst (Fe3O4@SiO2-NH2) were described by XRD, VSM, FT-IR, FESEM, EDAX, and DLS/Zeta potential analyses. The XRD findings approved the successful synthesis of nanoparticles. The photocatalytic activity of Fe3O4@SiO2-NH2 nanoparticles was examined for MB degradation and the degradation performance was about 90% in the optimum conditions. Also, the cytotoxicity of Fe3O4, Fe3O4@SiO2 core-shell, and Fe3O4@SiO2-NH2 nanoparticles was examined on CT-26 cells using an MTT assay, the finding has shown that nanoparticles can be used for inhibiting cancer cells.

Graphical abstract

Review on magnetic spinel ferrite (MFe2O4) nanoparticles: From synthesis to application

Magnetic spinel ferrite materials offer various applications in biomedical, water treatment, and industrial electronic devices, which has sparked a lot of attention. This review focuses on the synthesis, characterization, and applications of spinel ferrites in a variety of fields, particularly spinel ferrites with doping. Spinel ferrites nanoparticles doped with the elements have remarkable electrical and magnetic properties, allowing them to be used in a wide range of applications such as magnetic fields, microwave absorbers, and biomedicine. Furthermore, the physical properties of spinel ferrites can be modified by substituting metallic atoms, resulting in improved performance. The most recent and noteworthy applications of magnetic ferrite nanoparticles are reviewed and discussed in this review. This review goes over the synthesis, doping and applications of different types of metal ferrite nanoparticles, as well as views on how to choose the appropriate magnetic ferrites based on the intended application.

Nano magnetic-based ELISA and nano magnetic-based latex agglutination test for diagnosis of experimental trichinellosis

Human trichinellosis is a worldwide foodborne public health threat. Detecting circulating antigens of Trichinella spiralis "T. spiralis" allows for an early diagnosis before larval encystation develops in skeletal muscles. For the first time, the present study aimed to formulate an effective nanomagnetic beads based-ELISA and -latex agglutination test (NMB-ELISA and NMB-LAT) to recognize T. spiralis adult worm crude extract antigen (AWCEA) in sera of experimentally infected mice. The study included thirty-eight mice classified into 3 groups; T. spiralis-infected group (GI) which was euthanized 6, 8, 10, 12, 14 days post-infection (dpi), other parasitic infections group (GII) and healthy control group (GIII). Rabbit anti-T. spiralis polyclonal antibodies (pAbs) were utilized to detect AWCEA in serum samples by sandwich ELISA, NMB-ELISA, and NMB-LAT. Using NMB-ELISA, AWCEA was detected in sera collected at 6 and 8 dpi, with a sensitivity of 50% and 75%, respectively, and a specificity of 100%. Whereas, sandwich ELISA and NMB-LAT couldn't detect the antigen at the same time intervals. Both ELISA formats were able to detect the antigen in samples collected at 10, 12, and 14 dpi with a sensitivity of 100% for NMB-ELISA and 25%, 75%, and 100% respectively, for sandwich-ELISA. Yet, NMB-LAT couldn't detect AWCEA until 12 dpi with a sensitivity of 50% and specificity of 75%. In conclusion, NMB-ELISA is a promising sensitive tool for early and specific diagnosis of acute trichinellosis. The use of NMB-LAT could be a helpful screening procedure in field surveys.

Ultrasound-assisted synthesis of MIL-88(Fe) conjugated starch-Fe3O4 nanocomposite: A safe antibacterial carrier for controlled release of tetracycline

A constructing antibiotic carrier with a sustained release profile is a promising method to stop long-term bacterial infection, which is of ideal interest in different biomedical fields. To end this, the present study aims to design a novel carrier based on the modification of biopolymeric starch for the rising possible interaction between carrier and antibiotic agent. We established an in-situ ultrasound-assisted method was applied to grow and create MIL-88(Fe) framework in the structure of magnetic polysaccharide (i.e., St/Fe₃O₄) synthesized by precipitation method resulting in St/Fe₃O₄/MIL-88(Fe) nanocomposite. It was loaded with a high amount of Tetracycline (TC) through its immersion into the TC aqueous solution. The release profile of TC-loaded St/Fe₃O₄/MIL-88(Fe) displays a lower initial burst release (about 26 % after 12 h) and followed by a controlled and sustained release (about 73 % up to 168 h) in the simulated physiological environment at pH 7.4. The in vitro cytotoxicity showed good cytocompatibility against Human skin fibroblast (HFF-1) cells. TC-loaded St/Fe₃O₄/MIL-88(Fe) showed higher antibacterial activity against both S. aureus and E. coli with the MIC value of 64 and 128 μg·mL^-1, respectively.

Processing and Physicochemical Properties of Magnetite Nanoparticles Coated with Curcuma longa L. Extract

In this work, Curcuma longa L. extract has been used in the synthesis and direct coating of magnetite (Fe₃O₄) nanoparticles ~12 nm, providing a surface layer of polyphenol groups (-OH and -COOH). This contributes to the development of nanocarriers and triggers different bio-applications. Curcuma longa L. is part of the ginger family (Zingiberaceae); the extracts of this plant contain a polyphenol structure compound, and it has an affinity to be linked to Fe ions. The nanoparticles' magnetization obtained corresponded to close hysteresis loop M_s = 8.81 emu/g, coercive field H_c = 26.67 Oe, and low remanence energy as iron oxide superparamagnetic nanoparticles (SPIONs). Furthermore, the synthesized nanoparticles (G-M@T) showed tunable single magnetic domain interactions with uniaxial anisotropy as addressable cores at 90-180°. Surface analysis revealed characteristic peaks of Fe 2p, O 1s, and C 1s. From the last one, it was possible to obtain the C-O, C=O, -OH bonds, achieving an acceptable connection with the HepG2 cell line. The G-M@T nanoparticles do not induce cell toxicity in human peripheral blood mononuclear cells or HepG2 cells in vitro, but they can increase the mitochondrial and lysosomal activity in HepG2 cells, probably related to an apoptotic cell death induction or to a stress response due to the high concentration of iron within the cell.

High-Performance Detection of Exosomes Based on Synergistic Amplification of Amino-Functionalized Fe3O4 Nanoparticles and Two-Dimensional MXene Nanosheets

Exosomes derived from cancer cells have been recognized as a promising biomarker for minimally invasive liquid biopsy. Herein, a novel sandwich-type biosensor was fabricated for highly sensitive detection of exosomes. Amino-functionalized Fe₃O₄ nanoparticles were synthesized as a sensing interface with a large surface area and rapid enrichment capacity, while two-dimensional MXene nanosheets were used as signal amplifiers with excellent electrical properties. Specifically, CD63 aptamer attached Fe₃O₄ nanoprobes capture the target exosomes. MXene nanosheets modified with epithelial cell adhesion molecule (EpCAM) aptamer were tethered on the electrode surface to enhance the quantification of exosomes captured with the detection of remaining protein sites. With such a design, the proposed biosensor showed a wide linear range from 10² particles μL^-1 to 10⁷ particles μL^-1 for sensing 4T1 exosomes, with a low detection limit of 43 particles μL^-1. In addition, this sensing platform can determine four different tumor cell types (4T1, Hela, HepG2, and A549) using surface proteins corresponding to aptamers 1 and 2 (CD63 and EpCAM) and showcases good specificity in serum samples. These preliminary results demonstrate the feasibility of establishing a sensitive, accurate, and inexpensive electrochemical sensor for detecting exosome concentrations and species. Moreover, they provide a significant reference for exosome applications in clinical settings, such as liquid biopsy and early cancer diagnosis.