Enhanced enzymatic saccharification of kenaf powder after ultrasonic pretreatment in ionic liquids at room temperature

Structural elucidation and anti-asthmatic effects of semi-crystalline polysaccharides from Lignosus rhinocerotis (Cooke) Ryvarden

Asthma is a chronic respiratory disease characterized by airway inflammation. Lignosus rhinocerotis (LR), a medicinal mushroom rich in polysaccharide, has been traditionally used to treat various diseases, including asthma. This study aimed to fractionate, characterize and evaluate the anti-asthmatic effects of polysaccharides from LR (LRP). LRP was isolated and characterized using high-performance liquid chromatography (HPLC), x-ray diffraction analysis (XRD), fourier transform infrared spectrometry (FTIR) and nuclear magnetic resonance (NMR) spectroscopy. In an OVA-induced asthma model, BALB/c mice were sensitized, challenged, and intranasally treated with LRP. Experimental findings demonstrated that LRP exhibits a semi-crystalline nature with predicted structure of → 4)-α-D-Glcp-(1 → and → 3)-β-D-Glcp-(1→. LRP significantly reduced eosinophilia, Th2 cytokines, and IgE levels. Histological analysis revealed LRP's ability to decrease epithelial damage and epithelial and smooth muscle thickness in lung. Reductions in inflammatory cell infiltration, mucus production, and transforming growth factor (TGF)-β1 expression were observed, although not statistically significant. Gene expression analysis indicated that LRP significantly downregulated the inducible nitric oxide synthase (iNOS) expression. This study highlights a detailed structural analysis of LRP and its potential as an alternative for the management of asthma. Further research is needed to elucidate the precise mechanisms of action and optimize its therapeutic application.

Investigation of a robust pretreatment technique based on ultrasound-assisted, cost-effective ionic liquid for enhancing saccharification and bioethanol production from wheat straw

Application of cost-effective pretreatment of wheat straw is an important stage for massive bioethanol production. A new approach is aimed to enhance the pretreatment of wheat straw by using low-cost ionic liquid [TEA][HSO₄] coupled with ultrasound irradiation. The pretreatment was conducted both at room temperature and at 130 °C with a high biomass loading rate of 20% and 20% wt water assisted by ultrasound at 100 W-24 kHz for 15 and 30 min. Wheat straw pretreated at 130 °C for 15 and 30 min had high delignification rates of 67.8% and 74.9%, respectively, and hemicellulose removal rates of 47.0% and 52.2%. Moreover, this pretreatment resulted in producing total reducing sugars of 24.5 and 32.1 mg/mL in enzymatic saccharification, respectively, which corresponds to saccharification yields of 67.7% and 79.8% with commercial cellulase enzyme CelluMax for 72 h. The ethanol generation rates of 38.9 and 42.0 g/L were attained for pretreated samples for 15 and 30 min, equivalent to the yields of 76.1% and 82.2% of the maximum theoretical yield following 48 h of fermentation. This demonstration provided a cheap and promising pretreatment technology in terms of efficiency and shortening the pretreatment time based on applying low-cost ionic liquid and efficient ultrasound pretreatment techniques, which facilitated the feasibility of this approach and could further develop the future of biorefinery.

The Emergence of Extracellular Electron Mediating Functionality in Rice Straw-Artificial Soil Mixture during Humification

This study aimed to elucidate the origin of extracellular electron mediating (EEM) functionality and redox-active center(s) in humic substances, where they are ubiquitously distributed. Here, we show the emergence of EEM functionality during the humification of rice straw in artificial soil (kaolin and sand) with a matric potential of -100 cm at 20 °C for one year. We used the dechlorination activity of an EEM material-dependent pentachlorophenol-dechlorinating anaerobic microbial consortium as an index of the EEM functionality. Although rice straw and its mixture with artificial soil did not initially have EEM functionality, it emerged after one month of humification and increased until six months after which the functionality was maintained for one year. Chemical and electrochemical characterizations demonstrated that the emergence and increase in EEM functionality were correlated with the degradation of rice straw, formation of quinone structures, a decrease in aromatic structures, an increase in nitrogenous and aliphatic structures, and specific electric capacitance during humification. The newly formed quinone structure was suggested as a potential redox-active center for the EEM functionality. These findings provide novel insights into the dynamic changes in EEM functionality during the humification of organic materials.

Lignocellulose biohydrogen towards net zero emission: A review on recent developments

This review mainly determines novel and advance physical, chemical, physico-chemical, microbiological and nanotechnology-based pretreatment techniques in lignocellulosic biomass pretreatment for bio-H2 production. Further, aim of this review is to gain the knowledge on the lignocellulosic biomass pretreatment and its priority on the efficacy of bio-H2 and positive findings. The influence of various pretreatment techniques on the structure of lignocellulosic biomass have presented with the pros and cons, especially about the cellulose digestibility and the interference by generation of inhibitory compounds in the bio-enzymatic technique as such compounds is toxic. The result implies that the stepwise pretreatment technique only can ensure eventually the lignocellulosic biomass materials fermentation to yield bio-H2. Though, the mentioned pretreatment steps are still a challenge to procure cost-effective large-scale conversion of lignocellulosic biomass into fermentable sugars along with low inhibitory concentration.

Thermo-chemo-sonic pretreatment of lignocellulosic waste: Evaluating anaerobic biodegradability and environmental impacts

In the present study, yard waste was pretreated by thermo-chemo-sonic pretreatment prior to anaerobic digestion to improve its anaerobic biodegradability. First, the pretreatment conditions were optimized using Box-Behnken design based response surface methodology for the maximum organic matter solubilisation. Then, the possible mechanism of delignification by thermo-chemo-sonic pretreatment was discussed. Moreover, the anaerobic digestion performance of untreated yard waste (UYW) and pretreated yard waste (PYW) was compared. The optimum pretreatment condition based on the increase in soluble COD and volatile solids (VS) was: 2997 kJ/kgTS ultrasonic energy, 74 °C, and 10.1 pH. The highest methane yield of 374 ± 28 mL/gVS_added for the PYW at the optimum condition was achieved, which was 37.5 % higher than the UYW (272 ± 16 mL/gVS_added). Finally, the environmental impacts associated with anaerobic digestion of both UYW and PYW were compared. The life cycle assessment confirmed a positive environmental impact of pretreatment.

Cellulosic Ethanol Production Using Waste Wheat Stillage after Microwave-Assisted Hydrotropic Pretreatment

One of the key elements influencing the efficiency of cellulosic ethanol production is the effective pretreatment of lignocellulosic biomass. The aim of the study was to evaluate the effect of microwave-assisted pretreatment of wheat stillage in the presence of sodium cumene sulphonate (NaCS) hydrotrope used for the production of second-generation bioethanol. As a result of microwave pretreatment, the composition of the wheat stillage biomass changed significantly when compared with the raw material used, before treatment. Microwave-assisted pretreatment with NaCS effectively reduced the lignin content and hemicellulose, making cellulose the dominant component of biomass, which accounted for 42.91 ± 0.10%. In post pretreatment, changes in biomass composition were also visible on FTIR spectra. The peaks of functional groups and bonds characteristic of lignins (C-O vibration in the syringyl ring, asymmetric bending in CH₃, and aromatic skeleton C-C stretching) decreased. The pretreatment of the analyzed lignocellulosic raw material with NaCS resulted in the complete conversion of glucose to ethanol after 48 h of the process, with yield (in relation to the theoretical one) of above 91%. The highest observed concentration of ethanol, 23.57 ± 0.10 g/L, indicated the high effectiveness of the method used for the pretreatment of wheat stillage that did not require additional nutrient supplementation.

Transforming lignocellulosic biomass into biofuels enabled by ionic liquid pretreatment

Processes that can convert lignocellulosic biomass into biofuels and chemicals are particularly attractive considering renewability and minimal environmental impact. Ionic liquids (ILs) have been used as novel solvents in the process development in that they can effectively deconstruct recalcitrant lignocellulosic biomass for high sugar yield and lignin recovery. From cellulose-dissolving ILs to choline-based and protic acidic ILs, extensive research in this field has been done, driven by the promising future of IL pretreatment. Meanwhile, shortcomings and technological hurdles are ascertained during research and developments. It is necessary to present a general overview of recent developments and challenges in this field. In this review paper, three aspects of advances in IL pretreatment are critically analyzed: biocompatible ILs, protic acidic ILs and combinatory pretreatments.

A Review on the Partial and Complete Dissolution and Fractionation of Wood and Lignocelluloses Using Imidazolium Ionic Liquids

Ionic liquids have shown great potential in the last two decades as solvents, catalysts, reaction media, additives, lubricants, and in many applications such as electrochemical systems, hydrometallurgy, chromatography, CO2 capture, etc. As solvents, the unlimited combinations of cations and anions have given ionic liquids a remarkably wide range of solvation power covering a variety of organic and inorganic materials. Ionic liquids are also considered "green" solvents due to their negligible vapor pressure, which means no emission of volatile organic compounds. Due to these interesting properties, ionic liquids have been explored as promising solvents for the dissolution and fractionation of wood and cellulose for biofuel production, pulping, extraction of nanocellulose, and for processing all-wood and all-cellulose composites. This review describes, at first, the potential of ionic liquids and the impact of the cation/anion combination on their physiochemical properties and on their solvation power and selectivity to wood polymers. It also elaborates on how the dissolution conditions influence these parameters. It then discusses the different approaches, which are followed for the homogeneous and heterogeneous dissolution and fractionation of wood and cellulose using ionic liquids and categorize them based on the target application. It finally highlights the challenges of using ionic liquids for wood and cellulose dissolution and processing, including side reactions, viscosity, recyclability, and price.

Effect of microwave-assisted ionic liquid/acidic ionic liquid pretreatment on the morphology, structure, and enhanced delignification of rice straw

In the present study, was investigated an environmentally friendly method for pretreating lignocellulosic rice straw (RS) by using 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) as an ionic liquid (IL) and 1-butyl-3-methylimidazolium hydrogen sulfate ([Bmim]HSO₄) as an acidic-IL (Acidic-IL) under microwave irradiation (microwave-[Bmim]Cl and microwave-[Bmim]HSO₄). The conversion of lignocellulosic biomass into simple sugars requires both efficient pretreatment and hydrolysis enzymes to produce biofuels and specialty chemicals. Therefore, the applied [Bmim]Cl, [Bmim]HSO₄, microwave-[Bmim]Cl, and microwave-[Bmim]HSO₄ to improve hydrolysis yields. Structural analyses of the pretreated solids were performed to understand the synergistic effects of [Bmim]Cl, and [Bmim]HSO₄ pretreatment under microwave irradiation (microwave-[Bmim]Cl and microwave-[Bmim]HSO₄) on the efficiencies of enzymatic hydrolyses. The results of a chemical composition analysis of untreated and all pretreated RS samples by using the difference pretreatment methods showed that significant lignin removal was achieved using microwave-[Bmim]Cl (57.02 ± 1.24%), followed by [Bmim]Cl only (41.01 ± 2.67%), microwave-[Bmim]HSO₄ (20.77 ± 1.79%), and [Bmim]HSO₄-only (16.88 ± 1.14%). The highest glucan yield and xylan conversion achieved through the enzymatic saccharification of microwave-[Bmim]Cl-regenerated cellulose was consistent with the observations obtained from a structural analysis, which indicated a more disrupted, amorphous structure, with lowered crystallinity index (CrI) and lateral order index (LOI) of cellulose polymers. Thus results demonstrated that the pretreatment of lignocellulosic biomass with [Bmim]Cl under microwave irradiation has potential as an alternative method for pretreating lignocellulosic materials.

Evaluation and characterization of novel sources of sustainable lignocellulosic residues for bioethanol production using ultrasound-assisted alkaline pre-treatment

In recent years, research is focused on finding a sustainable and eco-friendly lignocellulosic biomass for the effective production of bioethanol to meet the world's energy demand. The present study investigates the bioethanol production potential of four different lignocellulosic biomass residues viz., Saccharum arundinaceum (hardy sugar cane), Arundo donax (giant reed), Typha angustifolia (narrow-leaved cattail), and Ipomoea carnea (pink morning glory). The maximum reducing sugar release showed 185.00 ± 1.57, 213.73 ± 3.47, 187.57 ± 2.14, 294.08 ± 3.98 mg/g and fermentation efficiency of 72.60 ± 8.17%, 82.59 ± 7.42%, 77.45 ± 7.35%, and 85.04 ± 8.37% which was analyzed by estimating the percentage of bioethanol yield were achieved for Saccharum arundinaceum, Arundo donax, Typha angustifolia, and Ipomoea carnea, respectively. The chemical composition of biomass was characterized using National Renewable Energy Limited (NREL) protocol. The effect of ultrasound (US)-assisted alkaline pre-treatment on the four biomasses was characterized by different techniques. The cavitation phenomena of US-assisted alkaline pre-treatment was evident from the decreased value of lignin percentage, increased surface porosity and area, changes in crystallinity index (CrI) values and in the functional groups of biomass. The results revealed that all the four lignocellulosic biomass residues could be utilized as an effective and sustainable source for the production of bioethanol using US-assisted sodium hydroxide as a pre-treatment tool.

Ultrasound-ionic liquid enhanced enzymatic and acid hydrolysis of biomass cellulose

The purpose of this paper was to investigate the effect of ultrasound-ionic liquid (IL) pretreatment on the enzymatic and acid hydrolysis of the sugarcane bagasse and wheat straw. The lignocellulosic biomass was dissociated in ILs ([Bmim]Cl and [Bmim]AOC) aided by ultrasound waves. Sonication was performed at different frequencies (20, 28, 35, 40, and 50kHz), a power of 100W, a time of 30min and a temperature of 80°C. The changes in the structure and crystallinity of the cellulose were studied by Fourier transform infrared (FT-IR), X-ray diffraction (XRD) and thermal gravimetric analysis (TGA). The amounts of the total reducing sugars, glucose, cellobiose, xylose and arabinose in the hydrolysates were determined. The results of FT-IR, XRD and TGA revealed that the structure of cellulose of both biomass samples remained intact after the pretreatment, but the crystallinity decreased. The enzymatic and acid hydrolysis of the biomass samples pretreated with the ultrasound-IL result in higher yields of the reducing sugars compared with the IL-pretreated sample. Enzymatic hydrolysis of bagasse and wheat straw pretreated with [Bmim]Cl-ultrasound resulted in maximal yields of glucose at 20kHz (40.32% and 53.17%) and acid hydrolysis resulted in maximal yields of glucose at 40kHz (33.32% and 48.07%). Enzymatic hydrolysis of bagasse and wheat straw pretreated with [Bmim]OAc-ultrasound show maximal yields of glucose at 28kHz and acid hydrolysis at 50kHz. Combination of ultrasound with [Bmim]OAc is more effective than [Bmim]Cl in terms of the yields of reducing sugar.

Ultrasound-assisted biological conversion of biomass and waste materials to biofuels: A review

Ultrasound irradiation has been gaining increasing interests over the years to assist biological conversion of lignocellulosic biomass and waste materials to biofuels. As such, this study reviewed the different effects of sonication on pre-treatment of lignocellulosic biomass and waste materials prior to biofuel production. The mechanisms of ultrasound irradiation as a pre-treatment technique were initially described and the impacts of sonication on disruption of lignocellulosic materials, alteration of the crystalline lattice structure of cellulose molecules, solubilisation of organic matter, reducing sugar production and enzymatic hydrolysis were then reviewed. Subsequently, the influences of ultrasound irradiation on bio-methane, bio-hydrogen and bio-ethanol production were re-evaluated, with most studies reporting enhanced biofuel production from anaerobic digestion or fermentation processes. Nonetheless, despite its positive impacts on biofuel production, sonication was found to be energetically inefficient based on the lab-scale studies reviewed. To conclude, this study reviewed some of the challenges of ultrasound irradiation for enhanced biofuel production while outlining some areas for further research.

Development and evaluation of consolidated bioprocessing yeast for ethanol production from ionic liquid-pretreated bagasse

This work aimed to study the use of consolidated bioprocess (CBP) yeast expressing five cellulase genes (BGL, XYNII, EGII, CBHI and CBHII) for ethanol production from ionic liquid-pretreated bagasse and Laubholz unbleached Kraft pulp (LUKP). A proposed screening method shows that the optimal cellulase ratio varies for each biomass substrate, and thus it is essential to breed CBP yeast having optimal cellulase-displaying ratio for the target biomass. CBP yeast specialized towards bagasse produced 0.93g/l ethanol whiles that for LUKP produced 0.71g/l ethanol, which is approximately 4 and 2-fold, respectively, higher than that of the wild type. The cell-surface displayed enzymes synergistically contributed to the degradation of the biomass. The developed CBP yeast is a potential cheap source for consolidated bioprocessing of ethanol and the proposed screening method can be used for matching CBP yeast to a target biomass.

Degradation of lignin in birch sawdust treated by a novel Myrothecium verrucaria coupled with ultrasound assistance

Combined treatment of a novel fungal endophyte Myrothecium verrucaria coupled with ultrasound assistance was conducted to enhance lignin degradation in birch sawdust. The optimum treatment conditions were confirmed as the materials to liquid ratio 1:20, temperature 30°C, time 4days and pH 7, respectively. The results showed that the combined treatment led to the lignin degradation reaching 67.95±2.14%, while the lignin degradation were 45.50±2.12% and 13.75±0.66% with separate fungal treatment and ultrasound treatment, respectively. Moreover, SEM and FTIR analysis indicated that combined treatment significantly altered surface morphology and chemical structure of birch sawdust. The combined treatment greatly increased lignin removal during short time in mild environment. Therefore, these results demonstrated that the combined treatment of fungal endophyte coupled with ultrasound assistance has the high potential for the removal lignin in lignocellulose.

Detailed Analysis of Wheat Straw Node and Internode for Their Prospective Efficient Utilization

In order to efficiently utilize wheat straw, the systematic examination of their cell wall components, chemical structures, morphology, and relation to the physicochemical and mechanical properties is necessary. Detailing of node and internode signifies their different features and characteristics which can ultimately lead to their separated processing for enhanced efficiency and higher value-added biorefinery. In this study, distinct variations were found among characteristics of node and internode, inner and outer surface. It was revealed that the node has more extractives, Klason lignin, and ash content than the internode; higher contents of extractives and ash in the node are related to the thicker epidermis tissue. Hot water followed by mild steam pretreatment was used to examine the effects on the characteristics of wheat straw. The results showed: (1) reduced level of waxes and Si (weight %) from the outer surface and (2) significantly lower (P < 0.05) extractives content in both internode and node.

The effect of surfactant-assisted ultrasound-ionic liquid pretreatment on the structure and fermentable sugar production of a water hyacinth

This study investigated the possibility of enhancing the disruption of water hyacinth (WH) in an ultrasound-ionic liquid (US-IL) pretreatment assisted by sodium dodecyl sulfate (SDS). 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) was used to dissolve the WH. The optimum concentration of SDS for the highest production of reducing sugar was also determined. Compared to the US-IL pretreatment, the production of reducing sugars, cellulose conversion and delignification were increased by 72.23%, 58.74% and 21.01%, respectively, upon addition of 0.5% SDS. Moreover, the enhancement of SDS in the US-IL pretreatment was confirmed by the analysis of structural features, which demonstrated that the SDS increased the removal of lignin and decreased the cellulose crystallinity.

Biotechnological route for sustainable succinate production utilizing oil palm frond and kenaf as potential carbon sources

Due to the world's dwindling energy supplies, greater thrust has been placed on the utilization of renewable resources for global succinate production. Exploration of such biotechnological route could be seen as an act of counterbalance to the continued fossil fuel dominance. Malaysia being a tropical country stands out among many other nations for its plenty of resources in the form of lignocellulosic biomass. To date, oil palm frond (OPF) contributes to the largest fraction of agricultural residues in Malaysia, while kenaf, a newly introduced fiber crop with relatively high growth rate, holds great potential for developing sustainable succinate production, apart from OPF. Utilization of non-food, inexhaustible, and low-cost derived biomass in the form of OPF and kenaf for bio-based succinate production remains largely untapped. Owing to the richness of carbohydrates in OPF and kenaf, bio-succinate commercialization using these sources appears as an attractive proposition for future sustainable developments. The aim of this paper was to review some research efforts in developing a biorefinery system based on OPF and kenaf as processing inputs. It presents the importance of the current progress in bio-succinate commercialization, in addition to describing the potential use of different succinate production hosts and various pretreatments-saccharifications under development for OPF and kenaf. Evaluations on the feasibility of OPF and kenaf as fermentation substrates are also discussed.

Ultrasound in Combination with Ionic Liquids: Studied Applications and Perspectives

Ionic liquids (ILs) as reaction media, and sonochemistry (US) as activation method, represent separately unconventional approaches to reaction chemistry that, in many cases, generate improvements in yield, rate and selectivity compared to traditional chemistry, or even induce a change in the mechanisms or expected products. Recently, these two technologies have been combined in a range of different applications, demonstrating very significant and occasionally surprising synergetic effects. In this book chapter, the advantages and limitations of the IL/US combination in different chemical applications are critically reviewed in order to understand how, and in which respects, it could become an essential tool of sustainable chemistry in the future. Fundamental aspects and practical considerations of the combination are discussed to better control and demonstrate the brought synergetic effects.

Pretreatment combining ultrasound and sodium percarbonate under mild conditions for efficient degradation of corn stover

Ultrasound (US) can be used to disrupt microcrystalline cellulose to give nanofibers via ultrasonic cavitation. Sodium percarbonate (SP), consisting of sodium carbonate and hydrogen peroxide, generates highly reactive radicals, which cause oxidative delignification. Here, we describe a novel pretreatment technique using a combination of US and SP (US-SP) for the efficient saccharification of cellulose and hemicellulose in lignocellulosic corn stover. Although US-SP pretreatment was conducted under mild condition (i.e., at room temperature and atmospheric pressure), the pretreatment greatly increased lignin removal and cellulose digestibility. We also determined the optimum US-SP treatment conditions, such as ultrasonic power output, pretreatment time, pretreatment temperature, and SP concentration for an efficient cellulose saccharification. Moreover, xylose could be effectively recovered from US-SP pretreated biomass without the formation of microbial inhibitor furfural.

Ultrasound-assisted bioalcohol synthesis: review and analysis

The present article highlights the efficacy of ultrasound in the intensification of all the steps of bioalcohol synthesis with a critical analysis of the literature.

Current Pretreatment Technologies for the Development of Cellulosic Ethanol and Biorefineries

Lignocellulosic materials, such as forest, agriculture, and agroindustrial residues, are among the most important resources for biorefineries to provide fuels, chemicals, and materials in such a way to substitute for, at least in part, the role of petrochemistry in modern society. Most of these sustainable biorefinery products can be produced from plant polysaccharides (glucans, hemicelluloses, starch, and pectic materials) and lignin. In this scenario, cellulosic ethanol has been considered for decades as one of the most promising alternatives to mitigate fossil fuel dependence and carbon dioxide accumulation in the atmosphere. However, a pretreatment method is required to overcome the physical and chemical barriers that exist in the lignin-carbohydrate composite and to render most, if not all, of the plant cell wall components easily available for conversion into valuable products, including the fuel ethanol. Hence, pretreatment is a key step for an economically viable biorefinery. Successful pretreatment method must lead to partial or total separation of the lignocellulosic components, increasing the accessibility of holocellulose to enzymatic hydrolysis with the least inhibitory compounds being released for subsequent steps of enzymatic hydrolysis and fermentation. Each pretreatment technology has a different specificity against both carbohydrates and lignin and may or may not be efficient for different types of biomasses. Furthermore, it is also desirable to develop pretreatment methods with chemicals that are greener and effluent streams that have a lower impact on the environment. This paper provides an overview of the most important pretreatment methods available, including those that are based on the use of green solvents (supercritical fluids and ionic liquids).

Structural features affecting the enzymatic digestibility of pine wood pretreated with ionic liquids

Pretreating lignocellulosic biomass with certain ionic liquids results in structural and chemical changes that make the biomass more digestible by enzymes. In this study, pine wood was pretreated with 1-ethyl-3-methylimidazolium chloride/acetate ([C2 mim]Cl and [C2 mim][OAc]) at different temperatures to investigate the relative importance of substrate features, such as accessible surface area, cellulose crystallinity, and lignin content, on enzymatic digestibility. The ionic liquid pretreatments resulted in glucan conversions ranging from 23% to 84% on saccharification of the substrates, with [C2 mim][OAc] being more effective than [C2 mim]Cl. The pretreatments resulted in no delignification of the wood, some loss of cellulose crystallinity under certain conditions, and varying levels of increased surface area. Enzymatic digestibility closely correlated with accessible surface area and porosity measurements obtained using Simons' staining and thermoporosimetry techniques. Increased accessible surface area was identified as the principal structural feature responsible for the improved enzymatic digestibility.

Chemical characteristics and enzymatic saccharification of lignocellulosic biomass treated using high-temperature saturated steam: comparison of softwood and hardwood

This study investigated the effect of high-temperature saturated steam treatments on the chemical characteristics and enzymatic saccharification of softwood and hardwood. The weight loss and chemical modification of cedar and beech wood pieces treated at 25, 35, and 45 atm for 5 min were determined. Fourier transform infrared and X-ray diffraction analyses indicated that solubilization and removal of hemicellulose and lignin occurred by the steam treatment. The milling treatment of steam-treated wood enhanced its enzymatic saccharification. Maximum enzymatic saccharification (i.e., 94% saccharification rate of cellulose) was obtained using steam-treated beech at 35 atm for 5 min followed by milling treatment for 1 min. However, the necessity of the milling treatment for efficient enzymatic saccharification is dependent on the wood species.

Rapid dissolution of switchgrass in 1-butyl-3-methylimidazolium chloride by ultrasonication

The utilization of ultrasonics to rapidly dissolve switchgrass in ionic liquid, 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) was evaluated in this work. The objective of the study focused on determining the effects of various ultrasonic conditions on the recovery of carbohydrate from biomass, lignin removal, and enzymatic hydrolysis. Dried ground switchgrass was added to ionic liquid, then sonicated at a frequency of 20kHz. The experiments were conducted using a catenoidal horn at varying amplitudes of 96μm, 128μm, and 160μm and sonication times of 2, 3, and 4min. Similarly, ground switchgrass was dissolved in ionic liquid assisted by conventional heat treatment at 130°C for 12 and 24h. The results showed good delignification results of 53% for the 24h heat pretreated samples and of 50.8% for ultrasonic assisted samples at 160μm amplitude and 4min. Even in the presence of lignin in the recovered biopolymer, both of heat treated and ultrasonicated samples obtained 100% glucan digestibility after only 3h of enzymatic hydrolysis. Heat pretreated samples exhibited 44-59% lower xylan digestibility compared to ultrasonic pretreated samples (160μm amplitude and 4min sonication time). Scanning electron microscope images displayed significant changes in biomass structure from intact and crystalline of the untreated biomass to disintegrated and amorphous of the treated biomass (heat treated and ultrasonicated). With increasing ultrasonic amplitude the carbohydrate recovery decreased. Also, more than 50% of the hemicellulose fraction was lost during biomass recovery. Overall, it was concluded that ultrasonication was a promising technology to enhance dissolution of lignocellulose in ionic liquid.

Synergism between ultrasonic pretreatment and white rot fungal enzymes on biodegradation of wheat chaff

Lignocellulosic biomass samples (wheat chaff) were pretreated by ultrasound (US) (40kHz/0.5Wcm(-2)/10min and 400kHz/0.5Wcm(-2)/10min applied sequentially) prior to digestion by enzyme extracts obtained from fermentation of the biomass with white rot fungi (Phanerochaete chrysosporium or Trametes sp.). The accessibility of the cellulosic components in wheat chaff was increased, as demonstrated by the increased concentration of sugars produced by exposure to the ultrasound treatment prior to enzyme addition. Pretreatment with ultrasound increased the concentration of lignin degradation products (guaiacol and syringol) obtained from wheat chaff after enzyme addition. In vitro digestibility of wheat chaff was also enhanced by the ultrasonics pretreatment in combination with treatment with enzyme extracts. Degradation was enhanced with the use of a mixture of the enzyme extracts compared to that for a single enzyme extract.

Combination of ultrasonic irradiation with ionic liquid pretreatment for enzymatic hydrolysis of rice straw

The application of ultrasonic irradiation and ionic liquids (ILs) in the degradation of rice straw under different processes of pretreatment and enzymatic hydrolysis was investigated. Various substrates for enzymatic hydrolysis by cellulase with and without ultrasound were as follows: untreated rice-straw powder (RS); RS treated by ILs of 1-ethyl-3-methylimidazolium ethylsulfate and trihexyl (tetradecyl) phosphonium decanoate with ultrasound at 300 W/(40 kHz, 28 kHz); RS treated by IL of choline hydroxide ([Ch][OH]) with ultrasound at 300 W/40 kHz (CHRS). In ultrasound-mediated enzymatic hydrolysis, the yield of total reducing sugar (TRS) converted from CHRS was up to 96.22% at 240 min and was greater than that from the other substrates; the TRS yield for CHRS with ultrasound was 19.5% greater than that without irradiation. Lignocellulosic biomass pretreated with [Ch][OH] showed the highest efficiency among the tested ILs, and ultrasound can be applied effectively in rice-straw pretreatment and enzymatic hydrolysis.

Unraveling the structural characteristics of lignin in hydrothermal pretreated fibers and manufactured binderless boards from Eucalyptus grandis

Background

Eucalyptus grandis is one of the most abundant biomass from plantation in many parts of the world. The binderless board were manufactured from hydrothermal pretreated fibers of Eucalyptus wood and characterized for the chemical analyses and mechanical strengths in order to assess the mechanism of self-bonding. To make clear the self-bonding mechanism of these binderless boards, the structural characteristics of cellulolytic enzyme lignin (CEL) isolated from Eucalyptus wood, its hydrothermal pretreated fibers, and binderless boards were thoroughly investigated by chemical and spectroscopic methods.

Results

The result revealed that hydrothermal pretreatment and hot pressing process could change cellulose crystalline structures by disrupting inter/intra hydrogen bonding of cellulose chains. During the hydrothermal pretreatment of Eucalyptus wood, acid-catalyzed cleavage of β-O-4′ linkages and ester bonds were the major mechanisms of lignin cleavage. This degradation pathway led to a more condensed lignin which has a high average molecular weight and more phenolic hydroxyl groups than the control. The hot pressing process resulted in the binderless boards with reduced lignin contents and decreased the glass transition temperature, thus making the lignin more accessible to the fiber surface. CEL isolated from the binderless boards showed an increased syringyl to guaiacyl propane (S/G) ratio but a lower molecular weight than those of the untreated Eucalyptus wood and the hydrothermal pretreated fibers.

Conclusions

Based on the finding of this study, it is suggested that the combination of hydrothermal pretreatment and hot pressing process is a good way for conditioning hardwood sawdust for the production of binderless boards. The thermal softening of lignin, rich in phenolic hydroxyl groups, and increased condensed lignin structure contributed to the self-bonding formation of lignocellulosic materials.

Ionic liquids and ultrasound in combination: synergies and challenges

The advantages and the limits of the ionic liquid/ultrasound combination for different applications in chemistry are critically reviewed to understand how it could become an essential tool in future years.

Sonocatalytic-Fenton reaction for enhanced OH radical generation and its application to lignin degradation

The present study demonstrated that the combined use of the sonocatalytic reaction (using ultrasound and titanium dioxide) and the Fenton reaction exhibited synergistically enhanced hydroxyl (OH) radical generation. Dihydroxybenzoic acid (DHBA) concentration as index of OH radical generation was 13 and 115 μM at 10 min in the sonocatalytic reaction and Fenton reaction, respectively. On the other hand, the DHBA concentration was 378 μM at 10 min in the sonocatalytic-Fenton reaction. The sonocatalytic-Fenton reaction was used for degradation of lignin. The lignin degradation ratio was 1.8%, 49.9%, and 60.0% at 180 min in the sonocatalytic reaction, Fenton reaction, and sonocatalytic-Fenton reaction, respectively. Moreover, the sonocatalytic-Fenton reaction was applied to pretreatment of lignocellulosic biomass to enhance subsequent enzymatic saccharification. The cellulose saccharification ratio was 11%, 14%, 16% and 25% at 360 min of pretreatment by control reaction, the sonocatalytic reaction, Fenton reaction, and sonocatalytic-Fenton reaction, respectively.

Ionic liquids as a tool for lignocellulosic biomass fractionation

Lignocellulosic biomass composes a diversity of feedstock raw materials representing an abundant and renewable carbon source. In majority lignocellulose is constituted by carbohydrate macromolecules, namely cellulose and hemicellulose, and by lignin, a polyphenilpropanoid macromolecule. Between these biomacromolecules, there are several covalent and non-covalent interactions defining an intricate, complex and rigid structure of lignocellulose. The deconstruction of the lignocellulosic biomass makes these fractions susceptible for easier transformation to large number of commodities including energy, chemicals and material within the concept of biorefinery. Generally, the biomass pre-treatment depends on the final goal in the biomass processing. The recalcitrance of lignocellulose materials is the main limitation of its processing once the inherent costs are excessively high for the conventional pre-treatments. Furthermore, none of the currently known processes is highly selective and efficient for the satisfactory and versatile use, thus, new methodologies are still studied broadly. The ionic liquid technology on biomass processing is relatively recent and first studies were focused on the lignocellulosic biomass dissolution in different ionic liquids (ILs). The dissolution in IL drives to the structural changes in the regenerated biomass by reduction of cellulose crystallinity and lignin content contrasting to the original biomass. These findings provided ILs as tools to perform biomass pre-treatment and the advantageous use of their specific properties over the conventional pre-treatment processes. This review shows the critical outlook on the study of biomass dissolution and changes occurred in the biomass during this process as well as on the influence of several crucial parameters that govern the dissolution and further pre-treatment process. The review of currently known methods of biomass fractionation in IL and aqueous-IL mixtures is also discussed here and perspectives regarding these topics are given as well.