A review on biosurfactants: properties, applications and current developments

Biosurfactant-based dispersants for oil spill remediation: Salinity effects and mechanistic insights

Salinity variations, particularly in dynamic environments such as estuaries, may significantly affect the dispersion effectiveness (DE) of oil spill dispersants. While bio-based dispersants are gaining attention as alternatives to chemical dispersants, limited research exists on their adaptability to varying salinity conditions and their associated molecular mechanism and ecological impact. This study evaluated the DE of bio-based dispersants formulated with two biosurfactants (BS); Surfactin (SUC) and Rhamnolipid (RAM), either individually or in combination with Tween 80 (TWE), referred to as BS/TWE, across salinity levels of 10, 20, and 34 psu. The DE of each bio-based dispersant was compared to the chemical dispersant Corexit 9500A under various environmental conditions, including dispersant-to-oil ratios, temperature variations, and mixing energy levels simulating turbulence in natural aquatic environments. The SUC-based dispersant achieved high DE (88 %) with smallest oil droplets size around 5.08 μm at 10 psu but exhibited reduced performance at 34 psu. In contrast, the BS/TWE dispersant showed 90 % DE with droplets size of 10.45 μm at 34 psu, as a result of synergistic surfactant interactions. Molecular dynamics simulation revealed that salinity affects surfactant-water interactions, with SUC-based dispersant losing efficiency at high salinity due to lack of ion bridging, while BS/TWE dispersant remaining effective through reduced electrostatic interactions. Toxicity assessments exhibited minimal inhibitory effects of bio-based dispersants on algal growth, Dunaliella tertiolecta, highlighting their potential for environmental applications. The findings highlight the potential of these dispersants as effective, and environmentally friendly solutions for oil spill response in diverse marine environments.

New perspectives on green and sustainable wet cleaning systems for art conservation

The field of cultural heritage conservation science has seen significant advancements over recent decades, particularly through the application of soft matter and colloid science. Gels, nanostructured fluids, nanoparticles, and other advanced functional materials have been developed to address challenges in cleaning, consolidation, and protection of art. More recently, the focus has shifted toward "green" materials and sustainable practices, aligning with broader trends in science and technology. This emphasis on sustainability has revealed the immense potential for cross-disciplinary exchange between conservation science and fields like drug delivery, the food industry, tissue engineering, and more. A clear example of this synergy is seen in the cleaning of artworks, where bio-derived surfactants and biomaterials are increasingly incorporated into microemulsions and gels. These innovations not only enhance cleaning efficacy but also align conservation practices with sustainable principles, drawing parallels to research in cosmetics, pharmaceuticals, and detergents. The examples and materials discussed in this contribution illustrate how advancements in art conservation science can foster mutual technological transfer with other industries. By leveraging the central role of soft matter and colloids, these collaborations produce sustainable solutions that can address critical societal, environmental, and economic challenges.

Genome mining, structural elucidation and surface-active property of a new lipopeptide from Bacillus subtilis

BACKGROUND

The Bacillus genus is well known for producing structurally diverse lipopeptides, many of which exhibit remarkable surface-active and bioactive properties, such as surfactin and daptomycin. In recent years, genome mining has emerged as an effective tool for the discovery of novel natural products by predicting biosynthetic gene clusters and linking them to secondary metabolite production. However, the full biosynthetic potential of many Bacillus subtilis strains remains unexplored. Therefore, this study aimed to investigate the biosynthetic potential of an oilfield-isolated Bacillus subtilis strain through genome mining, with the goal of identifying novel lipopeptides with enhanced surface activity.

RESULTS

In this study, we identified 14 biosynthetic gene clusters, four of which were related to lipopeptide biosynthesis. In addition, a lipopeptide was characterized as a new member of the surfactin family, namely surfactin-C18. The primary structure of surfactin-C18 was determined to be a heptapeptide ring of N-Glu-Leu-Leu-Val-Asp-Leu-Leu-C linked to the longest β-hydroxy fatty acid in the surfactin family, containing 18 carbon atoms. Moreover, we investigated the surface activity of surfactin-C18, measuring its critical micelle concentration and the surface tension to be 1.99 µmol/L and 28.63 mN/m, respectively. The obtained adsorption parameters of surfactin-C18 at the air/liquid interface further explained its enhanced surface activity in comparison with other surfactin homologs and commercial surfactants.

CONCLUSIONS

To the best of our knowledge, this is the first report on the structural characterization and surface activity of surfactin-C18. In addition, our findings not only demonstrate the biosynthetic potential of B. subtilis but also highlight the power of the genome mining strategy for discovering novel lipopeptides with industrial applications.

Liquid Crystal Cubic Phases Constructed from Sophorolipids Micelles

Biosurfactants are considered to be desirable alternatives to synthetic surfactants. Sophorolipids produced by nonpathogenic yeast strains are one of the main types of glycolipid biosurfactants and have various applications. In this work, the aqueous phase behavior of the glycolipid-based biosurfactant sophorolipids (SL) was investigated using polarized microscopy, small-angle X-ray diffraction (SAXS), nuclear magnetic deuterium spectroscopy (2H NMR), transmission electron microscopy (TEM), freeze-etched transmission electron microscopy (FF-TEM), and dynamic light scattering (DLS). The binary phase diagram of the SL/H2O system was constructed, and a liquid crystalline cubic phase constructed by sophorolipids micelles was observed. A micellar phase at low concentrations (<50 wt %) was found. As the concentration increases, after a transition phase, it is a strictly micellar cubic phase at concentrations up to 70 wt %. The micellar cubic phase is an isotropic, highly viscous liquid crystal composed of three-dimensionally ordered arrangements of spherical micelles, which are arranged in simple cubic (CubI/Pm3m) or body-centered cubic (CubI/Im3m). The rheological properties at different concentrations and temperatures were studied. The micellar cubic phase is highly viscoelastic, and the viscosity tends to decrease uniformly with increasing temperatures (15-90 °C) and then returns to its original state after cooling, indicating that the micellar cubic phase possesses satisfactory reversibility at high temperature. The results are expected to be instructive for the application of the sophorolipids.

Bioactive Metabolites from Radioresistant Bacterium Kocuria sp. TMM 11 and Their Role in Prevention of Ultraviolet-Induced Photodamages

A radioresistant bacterium identified as Kocuria sp.TMM 11 was isolated from Thal desert. Kocuria sp.TMM11 demonstrated resistance (57.3% survival rate) to an ultraviolet B radiations dose of 4.1 × 103 J/m2, 61.5% survival rate to hydrogen peroxide (60 mM) and 57.1% survivability to mitomycin C (6 μg/mL). An orange carotenoid pigment from strain TMM 11 was extracted using solvent mixture of methanol, ethyl acetate and acetone (7:5:3), subsequently purified using C18 cartridge column. The purified fraction was analyzed by liquid chromatography mass spectrometry and compounds identified were rhodovibrin, phytoene, 4'-Hydroxy-4,4'-diaponeurosporene-4-oic acid and 3,4,3',4'-Tetrahydrospirilloxanthin. The purified fraction with mixture of carotenoid compounds, was evaluated for its antioxidant activity, total flavonoids, phenolic content and radio protective potential. These assessments were conducted in relation to its ability to prevent protein and lipids oxidation, as well as DNA strand breaks in vitro. The fraction showed strong antioxidant activity, as indicated by its ability to scavenge super oxides, with an IC50 value of 50.8 μg/mL. Additionally, it displayed 75.76% iron chelation activity. The purified fraction strongly inhibited oxidative damage to proteins and lipids, comparable to the activity of standard ascorbic acid. The total phenolic and flavonoid contents in extract were measured 11.6 and 9.8 μg in terms of gallic acid and quercetin equivalents per milligram of dried mass. Hence, it is concluded that the carotenoid mixture from Kocuria sp.TMM 11 not only inhibited DNA strands from UV mediated photo damages but also protected lipid and protein peroxidation and therefore could be a good candidate in radio protective drugs and as sunscreen.

A comprehensive review on microbial production and significant applications of multifunctional biomolecules: biosurfactants

Microorganisms are very well known potential sources of many novel metabolites and biosurfactants (green molecules). Biosurfactants are biobased molecules which are synthesized by bacteria, yeasts, fungi and actinomycetes. These biomolecules have emerged as multifunctional biomolecules of the 21st century due to their remarkable functional properties like low toxicity, enhanced effectiveness, selectivity, stability, high biodegradability and eco-friendly nature. These characteristics enable them to remain high effective under extreme conditions and play a significant role in environmental protection. Biosurfactants play a pivotal role in bioremediation technologies, offering an environmentally sustainable alternative for cleaning up contaminants. Their unique ability to reduce interfacial tension in liquids enables them to perform crucial functions such as biodegradation, emulsification, foam formation, surface activity, washing performance and detergent formulation. These versatile properties make biosurfactants invaluable across various industries, including environmental remediation, pharmaceuticals, agriculture and cosmetics. This review discusses the microbial production, characterization, industrial applications and ecological significance of biosurfactants. By highlighting their impact in the bioremediation of contaminants, this article underscores the potential of biosurfactants in advancing green technologies and addressing global environmental challenges.

Biosurfactants, Polyhydroxyalkanoates, and Other Added-Value Products from Wastewater Electro-bioremediation: A New Biorefinery Concept

Electro-bioremediation of wastewater is a novel, nature-based solution towards clean water, based on microbial electrochemical technologies (METs). Electro-bioremediation technologies for wastewater treatment, except enhanced bioremediation results and renewable energy generation, offer an unlocked opportunity for harvesting by-products and using them in other applications. This concept contributes to circularity, sustainability, and environmental compatibility, mitigating the impact of climate change. In addition, wastewater valorization and, thus, water resilience are possible thereby leading to protection of water resources. Compounds and metabolites naturally synthesized by the microorganisms involved in the wastewater electro-assisted biodegradation, can result in the enhancement of both extracellular electron transfer (EET) and bioremediation. Such microbial products are added-value, natural, non-toxic and biodegradable such as biosurfactants (BSFs) and polyhydroxyalkanoates (PHAs). In this chapter, the effect of the presence of BSFs and PHAs in MET during electro-bioremediation, as well as when fed with conventional substrates, are exhaustively evaluated. The significance of BSFs even when they are added exogenously is also examined. The major categories of by-products biosynthesis including organic acids, biopolymers, recovered heavy metals and phenazines such as pyocyanin during electro-bioremediation processes are also discussed. Consequently, a future direction in wastewater electro-bioremediation is proposed.

Production Optimization and Potential Bioactivities of Biosurfactant from PET Surface-Dwelling Oligotrophic Bacillus sp. EIKU23

The growing demand for efficient biosurfactants in various industrial sectors has driven the search for sustainable alternatives, enhanced production methods, and low-cost substrates. This study aimed to optimize the production, characterize, and assess the bioactivities of biosurfactants produced by an oligotrophic PET plastic-associated Bacillus sp. EIKU23. The bacterium yielded the highest amount of biosurfactant after 6 days of incubation in Luria broth medium (pH 7.0) at 30 °C without any additives. FTIR and NMR analyses confirmed the lipopeptide nature of the biosurfactant, which exhibited a negative charge. The biosurfactant remained stable at 4 °C-80 °C and pH 7.0-8.0 for at least 7 days. It exhibited antioxidant properties comparable to the ascorbic acid standard, with efficacy ranging from 23.61% to 89.96% in different antioxidant assays. It showed antibacterial activity against both Gram-positive and Gram-negative potential pathogens. The biosurfactant induced substantial DNA leakage at a concentration of 10 mg/mL and eradicated approximately 48.4% of pre-formed Staphylococcus aureus biofilm and showed anti-attachment behaviour to a polystyrene surface. Additionally, the biosurfactant precipitated up to 98.7% uranium from an aqueous solution, demonstrating its potential for bioremediation. These findings suggest that the biosurfactant produced by Bacillus sp. EIKU23 is multifunctional with promising applications in bioremediation, antibacterial activity, antibiofilm formation, and antioxidant defense, offering a novel solution for sustainable industrial practices and plastic waste management.

Aligning priorities: A Comparative analysis of scientific and policy perspectives on municipal solid waste management

Municipal solid waste (MSW) management has become a critical issue today, posing substantial economic, environmental, and social challenges. Identifying and analyzing dominant themes in this field is essential for advancing research and policies towards sustainable MSW management practices. This study aims to explore the key issues related to MSW management that have been addressed by both the scientific community and policymakers through funded projects. By doing so, the study seeks to guide the scientific community as a knowledge producer and the EU as a key funder. Two Latent Dirichlet Allocation (LDA) models were applied to analyze the themes from two corpora: one representing scientific literature and another focusing on EU-funded projects. Additionally, this analysis was complemented by a quantitative estimation of the similarity between the two corpora, providing a measure of alignment between the scientific community and policymakers. The results generally indicate that the two spheres are aligned and highlight the diversity of topics explored by the scientific community. Nevertheless, it is concluded that there are opportunities for further research on specific topics, such as leaching and the extraction of heavy metals. Additionally, the popularity of topics identified in European Union-funded projects has fluctuated considerably over time, focusing primarily on waste management rather than its prevention. In light of these findings, waste prevention emerges as a promising avenue for future EU-funded research initiatives.

In Vitro Evaluation of the Biosurfactant Produced by Serratia ureilytica UTS with Antifungal and Nematicidal Activity Against Nacobbus aberrans

In the present study, the nematicidal and fungicidal activity of the biosurfactant (BS) produced by the strain Serratia ureilytica UTS was evaluated. The highest mortality of J2 juveniles of the nematode Nacobbus aberrans was 92.3% at a concentration of 30 mg/mL. Among the phytopathogenic fungi, the concentration of 1.0% of the crude extract of the biosurfactant was the one that obtained the highest percentage inhibition against the phytopathogens Fusarium oxysporum 72.2%, Fusarium sp., 80.2% and Alternaria solani 100% at 168 h of incubation. Analysis of the BS by GC-MS revealed the presence of the three amino acids alanine, homocystine and valine in its composition. As well as the presence of fatty acids: stearic acid, lauric acid and palmitic acid. With nuclear magnetic resonance (NMR) and mass spectrophotometry (MS) analysis, the crude extract was found to have the structure of a quaternary ammonium salt derived from stearic fatty acid, which is a component of the biosurfactant. Based on this evidence, it is suggested that the BS produced by S. ureilytica has a lipopeptide-like chemical structure and possesses nematicidal and fungicidal activity, and is therefore proposed for potential use and application as a biopesticide for the benefit of regenerative and sustainable agriculture.

Production of cost-effective rhamnolipid from Halopseudomonas sabulinigri OZK5 using waste frying oil

The major barrier to the wide-range application of biosurfactants is their high cost of production and low yield. In this study, waste frying oil (WFO) was used as the sole carbon source to produce cost-effective and eco-friendly rhamnolipids by Halopseudomonas sabulinigri OZK5 isolated from crude oil-contaminated soil samples. The optimal culture conditions for rhamnolipid production were determined as 30 ml/l waste frying oil, 37 °C temperature, pH 8, and 72 h incubation time. Under the optimized conditions 2.97 g/l rhamnolipid production was achieved. With a critical micelle concentration of 50 mg/l, the rhamnolipids could reduce the surface tension of water to 37.5 mN/m and demonstrate strong emulsifying activity (E24 = 67.3%). As a result of FTIR analyses, major peaks were obtained at 2924, 2854, 1720, 1570, 1396, 1051, and 981 cm-1. In conclusion, rhamnolipid production by non-pathogenic Halopseudomonas sabulinigri OZK5 using a low-cost fermentation medium has been shown to be biotechnologically promising.

Glycolipid and Lipopeptide Biosurfactants: Structural Classes and Characterization-Rhamnolipids as a Model

In recent years, biosurfactants (BS) produced by various bacteria, fungi and yeast strains have attracted much interest because of their unique properties and potential applications in many industries ranging from bioremediation to agriculture and biomedical to cosmetics. Glycolipids are a popular group of BS that include rhamnolipids, sophorolipids, mannosylerythritol, trehalose lipids, xylolipids and cellobiose lipids. Lipopeptides e.g., surfactins, iturins and fengycins are of major biotechnological interest because of their antitumor, immunomodulatory, and antimicrobial activities effects. This review addresses the structural properties of glycolipids and lipopeptides, their main domains of application as well as the screening tests of BS production. Glycolipids are mostly composed of a carbohydrate moiety linked to a ß-hydroxy fatty acid chain with a glycosidic bond. The properties of glycolipids are related to the nature of the carbohydrate moiety and the length of the fatty acid chain. The lipopeptide structure is mainly composed of a linear or cyclic peptide linked to fatty acids of different chain lengths. The structural complexity of these compounds requires various analytical techniques for characterization and quantification. As an example, the analytical techniques used for the characterization of rhamnolipids are presented in this review. RLs are very promising BS with a wide range of applications in various fields, such as cosmetics, food science, pharmaceuticals, and environmental remediation.

New Insights on Gordonia alkanivorans Strain 1B Surface-Active Biomolecules: Gordofactin Properties

Biosurfactants/bioemulsifiers (BSs/BEs) can be defined as surface-active biomolecules produced by microorganisms with a broad range of applications. In recent years, due to their unique properties like biodegradability, specificity, low toxicity, and relative ease of preparation, these biomolecules have attracted wide interest as an eco-friendly alternative for several industrial sectors, escalating global microbial BS/BE market growth. Recently, Gordonia alkanivorans strain 1B, a bacterium with significant biotechnological potential, well known for its biodesulfurizing properties, carotenoid production, and broad catabolic range, was described as a BS/BE producer. This study focuses on the characterization of the properties of the lipoglycopeptide BSs/BEs produced by strain 1B, henceforth referred to as gordofactin, to better understand its potential and future applications. Strain 1B was cultivated in a chemostat using fructose as a carbon source to stimulate gordofactin production, and different purification methods were tested. The most purified sample, designated as extracted gordofactin, after lyophilization, presented a specific emulsifying activity of 9.5 U/mg and a critical micelle concentration of 13.5 mg/L. FT-IR analysis revealed the presence of basic hydroxyl, carboxyl, ether, amine/amide functional groups, and alkyl aliphatic chains, which is consistent with its lipoglycopeptide nature (60% lipids, 19.6% carbohydrates, and 9% proteins). Gordofactin displayed remarkable stability and retained emulsifying activity across a broad range of temperatures (30 °C to 80 °C) and pH (pH 3-12). Moreover, a significant tolerance of gordofactin emulsifying activity (EA) to a wide range of NaCl concentrations (1 to 100 g/L) was demonstrated. Although with a great loss of EA in the presence of NaCl concentrations above 2.5%, gordofactin could still tolerate up to 100 g/L NaCl, maintaining about 16% of its initial EA for up to 7 days. Furthermore, gordofactin exhibited growth inhibition against both Gram-positive and Gram-negative bacteria, and it demonstrated concentration-dependent free radical scavenging activity for 2,2-diphenyl-1-picrylhydrazyl (IC50 ≈ 1471 mg/L). These promising features emphasize the robustness and potential of gordofactin as an eco-friendly BS/BE alternative to conventional surfactants/emulsifiers for different industrial applications.

Effect of biosurfactants on the transport of polyethylene microplastics in saturated porous media

Microplastic (MP) pollution has become a significant global environmental issue, and the potential application of biosurfactants in soil remediation has attracted considerable attention. However, the effects of biosurfactants on the transport and environmental risks of MPs are not fully understood. This study investigated the transport of polyethylene (PE) in the presence of two types of biosurfactants: typical anionic biosurfactant (rhamnolipids) and non-ionic biosurfactant (sophorolipids) using column experiments. We explored the potential mechanisms involving PE surface roughness and the influence of dissolved organic matter (DOM) on PE transport in the column under the action of biosurfactants, utilizing the Wenzel equation and fluorescence analysis. The results revealed that both the concentration of biosurfactants and the surface roughness of PE were advantageous for the adhesion of biosurfactants to the PE surface, thereby enhancing the mobility of PE in the column. The proportion of hydrophobic substances in various DOM sources is a critical factor that enhances PE transport in the column. However, the biosurfactant-mediated enhancement of PE transport was inhibited by the biosurfactant-DOM mixture. This was mainly due to DOM occupying the adhesion sites of biosurfactants on PE surfaces. Moreover, the mobility of PE in the presence of sophorolipids is higher than that in the presence of rhamnolipids because the combined hydrophobic and electrostatic forces between PE and sophorolipids create synergistic effects that improve PE stability. Additionally, the mobility of PE increased with rising pH and decreasing ionic strength. These findings provide a more comprehensive understanding of MP transport when using biosurfactants for soil remediation.

Optimisation of surfactin yield in Bacillus using data-efficient active learning and high-throughput mass spectrometry

Integration of machine learning and high throughput measurements are essential to drive the next generation of the design-build-test-learn (DBTL) cycle in synthetic biology. Here, we report the use of active learning in combination with metabolomics for optimising production of surfactin, a complex lipopeptide resulting from a non-ribosomal assembly pathway. We designed a media optimisation algorithm that iteratively learns the yield landscape and steers the media composition toward maximal production. The algorithm led to a 160 % yield increase after three DBTL runs as compared to an M9 baseline. Metabolomics data helped to elucidate the underpinning biochemistry for yield improvement and revealed Pareto-like trade-offs in production of other lipopeptides from related pathways. We found positive associations between organic acids and surfactin, suggesting a key role of central carbon metabolism, as well as system-wide anisotropies in how metabolism reacts to shifts in carbon and nitrogen levels. Our framework offers a novel data-driven approach to improve yield of biological products with complex synthesis pathways that are not amenable to traditional yield optimisation strategies.

Deciphering supramolecular arrangements, micellization patterns, and antimicrobial potential of bacterial rhamnolipids under extreme treatments of temperature and electrolyte

The micellization properties of rhamnolipids (RLs) in extreme electrolyte concentrations and temperatures have gained considerable attention due to their broad industrial applications. In this study, the aggregation behavior, specifically the micellization pattern (critical micelle concentration (CMC)) of RLs produced from a newly isolated thermophilic strain of Pseudomonas aeruginosa from a harsh environment of an oil field, was investigated by a spectrophotometric method at various temperatures (293-393 K) and electrolyte concentrations (NaCl: 2-20%). The result indicated that the CMC values (0.267-0.140 mM⋅dm-3) were both electrolyte- and temperature-dependent exhibiting a U-shaped trend as temperature and NaCl concentration increased. Variations in NaCl concentration and temperature also affected the standard Gibbs free energy (ΔGo mic ), enthalpy (ΔHo mic ), and entropy (ΔSo mic ) of micellization. The molecule also showed stability at a broad range of temperatures, pH, and NaCl concentrations. Thin-layer chromatography (TLC) and Fourier-transform infrared (FTIR) analysis confirmed the similarity in composition between the crude extract and the commercial RL with Rf values of 0.72 for mono-rhamnolipids and 0.28 for di-rhamnolipids. FTIR analysis confirmed the chemical nature particularly key aliphatic functional groups present in the fatty acid tail of RLs and the -COC- bond in the structure of the rhamnose moiety. Additionally, LC-ESI-QTOF analysis confirmed corresponding ionic fragments of mono- and di-rhamnolipids congeners. Furthermore, the antimicrobial potential was determined against different human pathogens in the absence and presence of NaCl by measuring zones of inhibition. The result revealed enhanced inhibitory effects against Gram-positive pathogens (S. aureus, S. epidermidis, and L. monocytogene), with zones of inhibition of 26, 30, and 20 mm in the presence of NaCl. These findings underline the role of NaCl in the micellization of RL molecules and highlight their importance in environmental applications, pharmaceuticals, and various life science sectors.

Bacterial biofilm-mediated environmental remediation: Navigating strategies to attain Sustainable Development Goals

Bacterial biofilm is a structured bacterial community enclosed within a three-dimensional polymeric matrix, governed by complex signaling pathways, including two-component systems, quorum sensing, and c-di-GMP, which regulate its development and resistance in challenging environments. The genetic configurations within biofilm empower bacteria to exhibit significant pollutant remediation abilities, offering a promising strategy to tackle diverse ecological challenges and expedite progress toward Sustainable Development Goals (SDGs). Biofilm-based technologies offer advantages such as high treatment efficiency, cost-effectiveness, and sustainability compared to conventional methods. They significantly contribute to agricultural improvement, soil fertility, nutrient cycling, and carbon sequestration, thereby supporting SDG 1 (No poverty), SDG 2 (Zero hunger), SDG 13 (Climate action), and SDG 15 (Life on land). In addition, biofilm facilitates the degradation of organic-inorganic pollutants from contaminated environments, aligning with SDG 6 (Clean water and sanitation) and SDG 14 (Life below water). Bacterial biofilm also has potential applications in industrial innovation, aligning SDG 7 (Affordable and clean energy), SDG 8 (Decent work and economic growth), and SDG 9 (Industry, innovation, and infrastructure). Besides, bacterial biofilm prevents several diseases, aligning with SDG 3 (Good health and well-being). Thus, bacterial biofilm-mediated remediation provides advanced opportunities for addressing environmental issues and progressing toward achieving the SDGs. This review explores the potential of bacterial biofilms in addressing soil pollution, wastewater, air quality improvement, and biodiversity conservation, emphasizing their critical role in promoting sustainable development.

Engineering oleaginous red yeasts as versatile chassis for the production of oleochemicals and valuable compounds: Current advances and perspectives

Enabling the transition towards a future circular bioeconomy based on industrial biomanufacturing necessitates the development of efficient and versatile microbial platforms for sustainable chemical and fuel production. Recently, there has been growing interest in engineering non-model microbes as superior biomanufacturing platforms due to their broad substrate range and high resistance to stress conditions. Among these non-conventional microbes, red yeasts belonging to the genus Rhodotorula have emerged as promising industrial chassis for the production of specialty chemicals such as oleochemicals, organic acids, fatty acid derivatives, terpenoids, and other valuable compounds. Advancements in genetic and metabolic engineering techniques, coupled with systems biology analysis, have significantly enhanced the production capacity of red yeasts. These developments have also expanded the range of substrates and products that can be utilized or synthesized by these yeast species. This review comprehensively examines the current efforts and recent progress made in red yeast research. It encompasses the exploration of available substrates, systems analysis using multi-omics data, establishment of genome-scale models, development of efficient molecular tools, identification of genetic elements, and engineering approaches for the production of various industrially relevant bioproducts. Furthermore, strategies to improve substrate conversion and product formation both with systematic and synthetic biology approaches are discussed, along with future directions and perspectives in improving red yeasts as more versatile biotechnological chassis in contributing to a circular bioeconomy. The review aims to provide insights and directions for further research in this rapidly evolving field. Ultimately, harnessing the capabilities of red yeasts will play a crucial role in paving the way towards next-generation sustainable bioeconomy.

Valorization of oil refinery by-products: production of sophorolipids utilizing fatty acid distillates and their potential antibacterial, anti-biofilm, and antifungal activities

Starmerella bombicola is a native yeast strain producing sophorolipids as secondary metabolites. This study explores the production, characterization, and biological activities of sophorolipids and investigates the antimicrobial, anti-biofilm, and antifungal properties of sophorolipids produced from oil refinery wastes by the yeast Starmerella bombicola. The present work demonstrated that S. bombicola MTCC 1910 when grown in oil refinery wastes namely palm fatty acid distillates and soy fatty acid distillates enhanced the rate of sophorolipids production drastically in comparison to vegetable oil, sunflower oil used as hydrophobic feedstock. Sophorolipid yields were 18.14, 37.21, and 46.1 g/L with sunflower oil, palm, and soy fatty acid distillates respectively. The crude biosurfactants were characterized using TLC, FTIR, and HPLC revealing to be acetylated sophorolipids containing both the acidic and lactonic isomeric forms. The surface lowering and emulsifying properties of the sophorolipids from refinery wastes were significantly higher than the sunflower oil-derived sophorolipids. Also, all the sophorolipids exhibited strong antibacterial properties (minimum inhibitory concentrations were between 50 and 200 µg mL-1) against Salmonella typhimurium, Bacillus cereus, and Staphylococcus epidermidis and were validated with morphological analysis by Scanning electron microscopy. All the sophorolipids were potent biofilm inhibitors and eradicators (minimum biofilm inhibitory and eradication concentrations were between 12.5 to 1000 µg mL-1) for all the tested organisms. Furthermore, antifungal activities were also found to exhibit about 16-56% inhibition at 1 mg mL-1 for fungal mycelial growth. Therefore, this endeavour of sophorolipids production using palm and soy fatty acid distillates not only opens up a window for the bioconversion of industrial wastes into productive biosurfactants but also concludes that sophorolipids from oil refinery wastes are potent antimicrobial, anti-biofilm, and antifungal agents, highlighting their potential in biotechnological and medical applications.

Recent advances in Emulsan production, purification, and application: Exploring bioemulsifiers unique potentials

Bioemulsifiers are compounds produced by microorganisms that reduce the interfacial forces between hydrophobic substances and water. Due to their potential in the pharmaceutical and food industries and their efficiency in oil spill remediation, they have been the subject of study in the scientific community while being safe, biodegradable, and sustainable compared to synthetic options. These biomolecules have high molecular weight and polymeric structures, distinguishing them from traditional biosurfactants. Emulsan, a bioemulsifier exopolysaccharide, is produced by Acinetobacter strains and is highly efficient in forming stable emulsions. Its low toxicity and high potential as an emulsifying agent promote its application in pharmaceutical and food industries as a drug-delivery vehicle and emulsion stabilizer. Due to the high environmental impact of oil spills, bioemulsifiers have great potential for environmental applications, such as bioremediation. This unique feature gives them a distinct mechanism of action in forming emulsions, resulting in minimal environmental impact. A better understanding of these aspects can improve the use of bioemulsifiers and environmental remediation in various industries. This review will discuss the production and characterization of Emulsan, focusing on recent advancements in cultivation conditions, purification techniques, compound identification, and ecotoxicity.

The proximate composition of vegetables enriched by incorporation of municipal solid waste into fertilizers and its impacts on environment and human health

The recent over production of municipal solid waste (MSW) poses a significant threat to both the ecosystem and human health. Utilizing MSW for agricultural purposes has emerged as a promising strategy to reduce solid waste disposal while simultaneously increasing soil fertility. To explore this potential solution further, an experiment was designed to assess the impact of varying concentrations of MSW (25%, 50%, and 75%) on the proximate composition of 15 different vegetable species. The experiment, conducted between 2018 and 2019, involved treating soil with different levels of solid waste and analyzing the proximate components, such as crude protein, dry matter, crude fiber, crude fat, and moisture content, in the 15 selected crops. The results indicate that the application of 25% MSW significantly increased the levels of crude protein, crude fiber, dry matter, and fat in Spinacia oleracea, Solanum tuberosum, Solanum melongena, and Abelmoschus esculentus. Conversely, the addition of 75% MSW notably elevated the moisture and ash content in Cucumis sativus. Correlation and scatter matrix analyses were conducted to elucidate the relationships between the protein, fiber, dry matter, ash, and fat contents. Principal component analysis and clustering confirmed the substantial impact of Treatment_1 (25% MSW) and Treatment_3 (75% MSW) on the proximate composition of the aforementioned vegetables, leading to their categorization into distinct groups. Our study highlights the efficacy of using 25% MSW to enhance the proximate composition and nutritional value of vegetables. Nonetheless, further research is warranted to investigate the mineral, antioxidant, vitamin, and heavy metal contents in the soil over an extended period of MSW application.

Microbial biosurfactants: Green alternatives and sustainable solution for augmenting pesticide remediation and management of organic waste

Pesticide pollution remains a significant environmental challenge, necessitating the exploration of sustainable alternatives. Biosurfactants are a class of unconventional surface-active chemicals that are produced by microorganisms. Biosurfactants have many applications in treating oil spills, emulsifiers, pharmaceuticals, and agriculture. Compared to chemical surfactants, they have benefits such as biodegradability, less toxicity, and a greener option because they are derived from microbes. Biosurfactants have recently been shown to have the potential to speed up pesticide cleanup. Biosurfactants are used in pesticide remediation because of their exceptional foaming ability, high selectivity, and wide range of pH, salinity, and temperature operating windows. Microbial biosurfactants emerged as potential agents for the treatment of organic waste and agricultural residue. This review unfolds the promising realm of microbial biosurfactants as green solutions for environmental sustainability, particularly in agricultural practices, with special reference to pesticide remediation. This article highlights the escalating need for eco-friendly alternatives, paving the way for discussing biosurfactants. Moreover, the articles discuss in detail various advancements in the field of rapid screening of biosurfactants, either using a conventional approach or via advanced instruments such as GC-MS, HPLC, NMR, FTIR, etc. Furthermore, the article unveils the molecular mechanisms and the microbial genes driving biosurfactant synthesis, offering insights into enhancing production efficiency. Moreover, the article explores diverse applications of microbial biosurfactants in sustainable agriculture, ranging from soil remediation to crop protection. The article also highlights the various functions of microbial biosurfactants for enhancing the decomposition and recycling of organic waste and agricultural residues, emphasizing their potential for sustainable waste management strategies. Overall, the review underscores the pivotal role of microbial biosurfactants as green alternatives for addressing pesticide pollution and advancing environmental sustainability.

A comprehensive review on sustainable surfactants from CNSL: chemistry, key applications and research perspectives

Surfactants, a group of amphiphilic molecules (i.e. with hydrophobic(water insoluble) as well as hydrophilic(water soluble) properties) can modulate interfacial tension. Currently, the majority of surfactants depend on petrochemical feedstocks (such as oil and gas). However, deployment of these petrochemical surfactants produces high toxicity and also has poor biodegradability which can cause more environmental issues. To address these concerns, the current research is moving toward natural resources to produce sustainable surfactants. Among the available natural resources, Cashew Nut Shell Liquid (CNSL) is the preferred choice for industrial scenarios to meet their goals of sustainability. CNSL is an oil extracted from non-edible cashew nut shells, which doesn't affect the food supply chain. The unique structural properties and diverse range of use cases of CNSL are key to developing eco-friendly surfactants that replace petro-based surfactants. Against this backdrop, this article discusses various state-of-the-art developments in key cardanol-based surfactants such as anionic, cationic, non-ionic, and zwitterionic. In addition to this, the efficiency and characteristics of these surfactants are also analyzed and compared with those of the synthetic surfactants (petro-based). Furthermore, the present paper also focuses on various market aspects and different applications in various industries. Finally, this article describes various future research perspectives including Artificial Intelligence technology which, of late, is having a huge impact on society.

Biodegradation of a complex hydrocarbon mixture and biosurfactant production by Burkholderia thailandensis E264 and an adapted microbial consortium

Bioremediation is considered to be an effective treatment for hydrocarbon removal from polluted soils. However, the effectiveness of this treatment is often limited by the low availability of targeted contaminants. Biosurfactants produced by some microorganisms can increase organic compound solubility and might then overcome this limitation. Two different inocula producers of biosurfactants (Burkholderia thailandensis E264 and SHEMS1 microbial consortium isolated from a hydrocarbon-contaminated soil) were incubated in Bushnell-Haas medium supplemented with hydrocarbons to investigate their biodegradation potential. Experimental results showed their ability to degrade 9.1 and 6.1% of hydrocarbons respectively after 65 days of incubation with an initial total hydrocarbon concentration of 16 g L-1. The biodegradation was more effective for the light and medium fractions (C10 to C36). B. thailandensis and SHEMS1 consortium produced surfactants after 14 days of culture during the stationary phase with hydrocarbons as the sole carbon and energy source. However, biosurfactant production did not appear to directly increase hydrocarbon degradation efficiency. The complexity and recalcitrance of hydrocarbon mixture used in this study appeared to continue to limit its biodegradation even in the presence of biosurfactants. In conclusion, B. thailandensis and SHEMS1 consortium can degrade recalcitrant hydrocarbon compounds and are therefore good candidates for the bioremediation of environments polluted by total hydrocarbons.

Valorization of waste engine oil to mono- and di-rhamnolipid in a sustainable approach to circular bioeconomy

This study aims to valorize waste engine oil (WEO) for synthesizing economically viable biosurfactants (rhamnolipids) to strengthen the circular bioeconomy concept. It specifically focuses on investigating the influence of key bioprocess parameters, viz. agitation and aeration rates, on enhancing rhamnolipid yield in a fed-batch fermentation mode. The methodology involves conducting experiments in a stirred tank bioreactor (3 L) using Pseudomonas aeruginosa gi |KP 163922| as the test organism. Central composite design and response surface methodology (CCD-RSM) are employed to design the experiments and analyze the effects of agitation and aeration rates on various parameters, including dry cell biomass (DCBM), surface tension, tensoactivity, and rhamnolipid yield. It is also essential to determine the mechanistic pathway of biosurfactant production followed by the strain using complex hydrophobic substrates such as WEO. The study reveals that optimal agitation and aeration rates of 200 rpm and 1 Lpm result in the highest biosurfactant yield of 29.76 g/L with minimal surface tension (28 mN/m). Biosurfactant characterization using FTIR, 1H NMR, and UPLC-MS/MS confirm the presence of dominant molecular ion peaks m/z 543.9 and 675.1. This suggests that the biosurfactant is a mixture of mono- and di-rhamnolipids (RhaC10C10, RhaRhaC10C12:1, RhaRhaC12:1C10). The findings present a sustainable approach for biosurfactant production in a fed-batch bioreactor. This research opens the possibility of exploring the use of pilot or large-scale bioreactors for biosurfactant production in future investigations.

Potential of biosurfactant as green pharmaceutical excipients for coating of microneedles: A mini review

Microneedles, a novel transdermal delivery system, were designed to improve drug delivery and address the challenges typically encountered with traditional injection practices. Discovering new and safe excipients for microneedle coating to replace existing chemical surfactants is advantageous to minimize their side effect on viable tissues. However, some side effects have also been observed for this application. The vast majority of studies suggest that using synthetic surfactants in microneedle formulations may result in skin irritation among other adverse effects. Hence, increasing knowledge about these components and their potential impacts on skin paves the way for finding preventive strategies to improve their application safety and potential efficacy. Biosurfactants, which are naturally produced surface active microbial products, are proposed as an alternative to synthetic surfactants with reduced side effects. The current review sheds light on potential and regulatory aspects of biosurfactants as safe excipients in the coating of microneedles.

Unlocking the potential of biosurfactants: Innovations in metabolic and genetic engineering for sustainable industrial and environmental solutions

Biosurfactants, synthesized by microorganisms, hold potential for various industrial and environmental applications due to their surface-active properties and biodegradability. Metabolic and genetic engineering strategies enhance biosurfactant production by modifying microbial pathways and genetics. Strategies include optimizing biosurfactant biosynthesis pathways, expanding substrate utilization, and improving stress responses. Genetic engineering allows customization of biosurfactant characteristics to meet industrial needs. Notable examples include engineering Pseudomonas aeruginosa for enhanced rhamnolipid production and creating synthetic biosurfactant pathways in non-native hosts like Escherichia coli. CRISPR-Cas9 technology offers precise tools for genetic manipulation, enabling targeted gene disruption and promoter optimization to enhance biosurfactant production efficiency. Synthetic promoters enable precise control over biosurfactant gene expression, contributing to pathway optimization across diverse microbial hosts. The future of biosurfactant research includes sustainable bio-processing, customized biosurfactant engineering, and integration of artificial intelligence and systems biology. Advances in genetic and metabolic engineering will enable tailor-made biosurfactants for diverse applications, with potential for industrial-scale production and commercialization. Exploration of untapped microbial diversity may lead to novel biosurfactants with unique properties, expanding the versatility and sustainability of biosurfactant-based solutions.

Production and characterization of the lipopeptide with anti-adhesion for oral biofilm on the surface of titanium for dental implants

Titanium implants are subject to bacterial adhesion and peri-implantitis induction, and biosurfactants bring a new alternative to the fight against infections. This work aimed to produce and characterize the biosurfactant from Bacillus subtilis ATCC 19,659, its anti-adhesion and antimicrobial activity, and cell viability. Anti-adhesion studies were carried out against Streptococcus sanguinis, Staphylococcus aureus, Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, and Proteus mirabilis as the minimum inhibitory concentration and the minimum bactericidal concentration. Cell viability was measured against osteoblast and fibroblast cells. The biosurfactant was classified as lipopeptide, with critical micelle concentration at 40 µg mL- 1, and made the titanium surface less hydrophobic. The anti-adhesion effect was observed for Staphylococcus aureus and Streptococcus sanguinis with 54% growth inhibition and presented a minimum inhibitory concentration of 15.7 µg mL- 1 for Streptococcus sanguinis and Aggregatibacter actinomycetemcomitans. The lipopeptide had no cytotoxic effect and demonstrated high potential application against bacterial biofilms.

Synthesis of homologous series of surfactants from renewable resources, structure-properties relationship, surface active performance, evaluation of their antimicrobial and anticancer potentialities

Sugar esters display surface-active properties, wetting, emulsifying, and other physicochemical phenomena following their amphipathic nature and recognize distinct biological activity. The development of nutritional pharmaceuticals and other applications remains of great interest. Herein, three novel homologous series of several N-mono-fatty acyl amino acid glucosyl esters were synthesized, and their physicochemical properties and biological activities were evaluated. The design and preparation of these esters were chemically performed via the reaction of glucose with different fatty acyl amino acids as renewable starting materials, with the suggestion that they would acquire functional characteristics superior and competitive to certain conventional surfactants. The synthesized products are characterized using FTIR, 1H-NMR, and 13C-NMR spectroscopy. Further, their physicochemical properties, such as HLB, CMC, Γmax, γCMC, and Amin, were determined. Additionally, their antimicrobial and anticancer efficiency were assessed. The results indicate that the esters' molecular structure, including the acyl chain length and the type of amino acid, significantly influences their properties. The measured HLB ranged from 8.84 to 12.27, suggesting their use as oil/water emulsifiers, wetting, and cleansing agents. All esters demonstrate promising surface-active characteristics, with moderate to high foam production with good stability. Notably, compounds 6-O-(N-dodecanoyl, tetradecanoyl cysteine)-glucopyranose (34, 35), respectively and 6-O-(N-12-hydroxy-9-octadecenoyl cysteine)-glucopyranose (38) display superior foamability. Wetting efficiency increased with decreasing the chain length of the acyl group. The storage results reveal that increasing the fatty acyl hydrophobe length enhances the derived emulsion's stability for up to 63 days. Particularly, including cysteine in these glucosyl esters improves wetting, foaming, and emulsifying potentialities. Furthermore, the esters exhibit antibacterial activity against several tested Gram-positive and Gram-negative bacteria and fungi. On the other hand, they show significant antiproliferative effects on some liver tumor cell lines. For instance, compounds 6-O-(N-12-hydroxy-9-octadecenoylglycine)-glucopyranose (28), 6-O-(N-dodecanoyl, hexadecanoyl, 9-octadecenoyl and 12-hydroxy-9-octadecenoylvaline)- glucopyranose (29, 31, 32 and 33), respectively in addition to the dodecanoyl, hexadecanoyl, 9-octadecenoyl and 12-hydroxy-9-octadecenoyl cysteine glucopyranose (34, 36, 37 and 38), respectively significantly inhibit the examined cancer cells.

Synthesis and characterization of iron oxide nanoparticles from Lawsonia inermis and its effect on the biodegradation of crude oil hydrocarbon

Crude oil hydrocarbons are considered major environmental pollutants and pose a significant threat to the environment and humans due to having severe carcinogenic and mutagenic effects. Bioremediation is one of the practical and promising technology that can be applied to treat the hydrocarbon-polluted environment. In this present study, rhamnolipid biosurfactant (BS) produced by Pseudomonas aeruginosa PP4 and green synthesized iron nanoparticles (G-FeNPs) from Lawsonia inermis was used to evaluate the biodegradation efficiency (BE) of crude oil. The surface analysis of G-FeNPs was carried out by using FESEM and HRTEM to confirm the size and shape. Further, the average size of the G-FeNPs was observed around 10 nm by HRTEM analysis. The XRD and Raman spectra strongly confirm the presence of iron nanoparticles with their respective peaks. The BE (%) of mixed degradation system-V (PP4+BS+G-FeNPs) was obtained about 82%. FTIR spectrum confirms the presence of major functional constituents (C=O, -CH3, C-O, and OH) in the residual oil content. Overall, this study illustrates that integrated nano-based bioremediation could be an efficient approach for hydrocarbon-polluted environments. This study is the first attempt to evaluate the G-FeNPs with rhamnolipid biosurfactant on the biodegradation of crude oil.

Advances in stabilization of metallic nanoparticle with biosurfactants- a review on current trends

Recently, research based on new biomaterials for stabilizing metallic nanoparticles has increased due to their greater environmental friendliness and lower health risk. Their stability is often a critical factor influencing their performance and shelf life. Nowadays, the use of biosurfactants is gaining interest due to their sustainable advantages. Biosurfactants are used for various commercial and industrial applications such as food processing, therapeutic applications, agriculture, etc. Biosurfactants create stable coatings surrounding nanoparticles to stop agglomeration and provide long-term stability. The present review study describes a collection of important scientific works on stabilization and capping of metallic nanoparticles as biosurfactants. This review also provides a comprehensive overview of the intrinsic properties and environmental aspects of metal nanoparticles coated with biosurfactants. In addition, future methods and potential solutions for biosurfactant-mediated stabilization in nanoparticle synthesis are also highlighted. The objective of this study is to ensure that the stabilized nanoparticles exhibit biocompatible properties, making them suitable for applications in medicine and biotechnology.

Comprehensive updates on the biological features and metabolic potential of the versatile extremophilic actinomycete Nocardiopsis dassonvillei

Nocardiopsis dassonvillei prevails under harsh environmental conditions and the purpose of this review is to highlight its biological features and recent biotechnological applications. The organism prevails in salt-rich soils/marine systems and some strains endure extreme temperatures and pH. A few isolates are associated with marine organisms and others cause human diseases. Comparative genomic analysis indicates its versatility in producing biotechnologically relevant metabolites. Antimicrobial, cytotoxic, anticancer and growth promoting biomolecules are obtained from this organism. It also synthesizes biotechnologically important enzymes. Bioactive compounds and enzymes obtained from this actinomycete provide evidence regarding its metabolic competence and its potential economic value.

The Combined Effects of Azoxystrobin and the Biosurfactant-Producing Bacillus sp. Kol B3 against the Phytopathogenic Fungus Fusarium sambucinum IM 6525

This study aimed to evaluate how the combined presence of the synthetic fungicide azoxystrobin (AZ) and the biosurfactant-producing Bacillus sp. Kol B3 influences the growth of the phytopathogenic fungus Fusarium sambucinum IM 6525. The results showed a noticeable increase in antifungal effectiveness when biotic and abiotic agents were combined. This effect manifested across diverse parameters, including fungal growth inhibition, changes in hyphae morphology, fungal membrane permeability and levels of intracellular reactive oxygen species (ROS). In response to the presence of Fusarium and AZ in the culture, the bacteria changed the proportions of biosurfactants (surfactin and iturin) produced. The presence of both AZ and/or Fusarium resulted in an increase in iturin biosynthesis. Only in 72 h old bacterial-fungal co-culture a 20% removal of AZ was noted. In the fungal cultures (with and without the addition of the bacteria), the presence of an AZ metabolite named azoxystrobin free acid was detected in the 48th and 72nd hours of the process. The possible involvement of increased iturin and ROS content in antifungal activity of Bacillus sp. and AZ when used together are also discussed. Biosurfactants were analyzed by liquid chromatography with tandem mass spectrometry (LC-MS/MS). Microscopy techniques and biochemical assays were also used.

Assessing the feasibility and sustainability of a surfactin production process: a techno-economic and environmental analysis

Biosurfactants have been profiled as a sustainable replacement for chemical-based surfactants since these bio-based molecules have higher biodegradability. Few research papers have focused on assessing biosurfactant production to elucidate potential bottlenecks. This research aims to assess the techno-economic and environmental performance of surfactin production in a potential scale of 65m3, considering different product yields and involving the European energy crisis of 2021-2022. The conceptual design, simulation, techno-economic, and environmental assessments were done by applying process engineering concepts and software tools such as Aspen Plus v.9.0 and SimaPro v.8.3.3. The results demonstrated the high economic potential of surfactin production since the higher values in the market offset the low fermentation yields, low recovery efficiency, and high capital investment. The sensitivity analysis of the economic assessment elucidated a minimum surfactin selling price between 29 and 31 USD/kg of surfactin, while a minimum processing scale for economic feasibility between 4 and 5 kg/h is needed to reach an equilibrium point. The environmental performance must be improved since the carbon footprint was 43 kg CO2eq/kg of surfactin. The downstream processing and energy demand are the main bottlenecks since these aspects contribute to 63 and 25% of the total emissions. The fermentation process and downstream process are key factors for future optimization and research.

A molecular view on the interference established between vaginal Lactobacilli and pathogenic Candida species: Challenges and opportunities for the development of new therapies

Vaginal infectious diseases caused by viruses and bacteria have been linked to the occurrence of dysbiosis, that is, a reduction in the abundance of the normally dominating vaginal Lactobacillus species. Mucosal infections in the vagina and/or vulva caused by Candida species, usually known as vulvovaginal candidiasis (or VVC), are among the leading causes of diseases in the vaginal tract. The existence of a clear link between the occurrence of dysbiosis and the development of VVC is still unclear, although multiple observations point in that direction. Based on the idea that vaginal health is linked to a microbiota dominated by lactobacilli, several probiotics have been used in management of VVC, either alone or in combination with antifungals, having obtained different degrees of success. In most cases, the undertaken trials resorted to lactobacilli species other than those indigenous to the vaginal tract, although in vitro these vaginal species were shown to reduce growth, viability and virulence of Candida. In this paper we overview the role of lactobacilli and Candida in the vaginal micro- and myco-biomes, while discussing the results obtained in what concerns the establishment of interference mechanisms in vivo and the environmental factors that could determine that. We also overview the molecular mechanisms by which lactobacilli species have been shown to inhibit pathophysiology of Candida, including the description of the genes and pathways determining their ability to thrive in the presence of each other. In a time where concerns are increasing with the emergence of antifungal resistance and the slow pace of discovery of new antifungals, a thorough understanding of the molecular mechanisms underneath the anti-Candida effect prompted by vaginal lactobacilli is of utmost importance to assure a knowledge-based design of what can be a new generation of pharmaceuticals, eventually focusing therapeutic targets other than the usual ones.

Comparative negation of amphiphile production using nutrition factors: Amyloids versus biosurfactants

Microbial amphiphiles play an important role in environmental activities such as microbial signaling, bioremediation, and biofilm formation. Microorganisms rely on their unique characteristics of interfaces to carry out critical biological functions, which are helped by amphipathic biomolecules known as amphiphiles. Bacillus amyloids aid in cell adhesion and biofilm formation. Pseudomonas sp. are essential in biofilm development and are a vital survival strategy for many bacteria. Furthermore, Pseudomonas and Bacillus are well-known for their ability to produce biosurfactants with a range of applications, including bioremediation and removing biological pollutants from different environments. The study employed 31 different media types and a range of analytical techniques to assess the presence of amyloid proteins and the absence of biosurfactants in Bacillus licheniformis K125 (GQ850525.1) and Pseudomonas fluorescens CHA0. The presence of amyloid proteins was confirmed through Congo red and thioflavin T staining. The carefully constructed medium also efficiently inhibited the synthesis of biosurfactants by these bacteria. Additionally, surface tension measurements, emulsification index, thin-layer chromatography, and high-performance thin-layer chromatography analyses indicated the absence of biosurfactants in the tested media.

Exploring fungal bioemulsifiers: insights into chemical composition, microbial sources, and cross-field applications

The demand for emulsion-based products is crucial for economic development and societal well-being, spanning diverse industries such as food, cosmetics, pharmaceuticals, and oil extraction. Formulating these products relies on emulsifiers, a distinct class of surfactants. However, many conventional emulsifiers are derived from petrochemicals or synthetic sources, posing potential environmental and human health risks. In this context, fungal bioemulsifiers emerge as a compelling and sustainable alternative, demonstrating superior performance, enhanced biodegradability, and safety for human consumption. From this perspective, the present work provides the first comprehensive review of fungal bioemulsifiers, categorizing them based on their chemical nature and microbial origin. This includes polysaccharides, proteins, glycoproteins, polymeric glycolipids, and carbohydrate-lipid-protein complexes. Examples of particular interest are scleroglucan, a polysaccharide produced by Sclerotium rolfsii, and mannoproteins present in the cell walls of various yeasts, including Saccharomyces cerevisiae. Furthermore, this study examines the feasibility of incorporating fungal bioemulsifiers in the food and oil industries and their potential role in bioremediation events for oil-polluted marine environments. Finally, this exploration encourages further research on fungal bioemulsifier bioprospecting, with far-reaching implications for advancing sustainable and eco-friendly practices across various industrial sectors.

Unlocking the potential of biosurfactants: Production, applications, market challenges, and opportunities for agro-industrial waste valorization

Biosurfactants are eco-friendly compounds with unique properties and promising potential as sustainable alternatives to chemical surfactants. The current review explores the multifaceted nature of biosurfactant production and applications, highlighting key fermentative parameters and microorganisms able to convert carbon-containing sources into biosurfactants. A spotlight is given on biosurfactants' obstacles in the global market, focusing on production costs and the challenges of large-scale synthesis. Innovative approaches to valorizing agro-industrial waste were discussed, documenting the utilization of lignocellulosic waste, food waste, oily waste, and agro-industrial wastewater in the segment. This strategy strongly contributes to large-scale, cost-effective, and environmentally friendly biosurfactant production, while the recent advances in waste valorization pave the way for a sustainable society.

Advancements in biosurfactant production using agro-industrial waste for industrial and environmental applications

The adverse effects of waste generation on the environment and public health have raised global concerns. The utilization of waste as a raw material to develop products with enhanced value has opened up novel prospects for promoting environmental sustainability. Biosurfactants obtained from agro-industrial waste are noteworthy due to their sustainability and environmental friendliness. Microorganisms have been employed to generate biosurfactants as secondary metabolites by making use of waste streams. The utilization of garbage as a substrate significantly reduces the expenses associated with the process. Furthermore, apart from reducing waste and offering alternatives to artificial surfactants, they are extensively employed in bioremediation, food processing, agriculture, and various other industrial pursuits. Bioremediation of heavy metals and other metallic pollutants mitigated through the use of bacteria that produce biosurfactants which has been the more recent research area with the aim of improving its quality and environmental safety. Moreover, the production of biosurfactants utilizing agricultural waste as a raw material aligns with the principles of waste minimization, environmental sustainability, and the circular economy. This review primarily focuses on the production process and various types of biosurfactants obtained from waste biomass and feedstocks. The subsequent discourse entails the production of biosurfactants derived from various waste streams, specifically agro-industrial waste.

Bioprospecting of Metabolites from Actinomycetes and their Applications

Actinomycetes are present in various terrestrial and aquatic habitats, predominantly in the soil rhizosphere, encompassing marine and freshwater ecosystems. These microorganisms exhibit characteristics that resemble both bacteria and fungi. Numerous actinomycetes exhibit a mycelial existence and undergo significant morphological transformations. These bacteria are widely recognized as biotechnologically significant microorganisms utilized for the production of secondary metabolites. In all, over 45% of all bioactive microbial metabolites are produced by actinomycetes, which are responsible for producing around 10,000 of them. The majority of actinomycetes exhibit substantial saprophytic characteristics in their natural environment, enabling them to effectively decompose a diverse range of plant and animal waste materials during the process of decomposition. Additionally, these organisms possess a sophisticated secondary metabolic system, which enables them to synthesize almost two-thirds of all naturally occurring antibiotics. Moreover, they can create a diverse array of chemical compounds with medical or agricultural applications, including anticancer, antiparasitic, and antibacterial agents. This review aims to provide an overview of the prominent biotechnological domains in which actinobacteria and their metabolites demonstrate noteworthy applicability. The graphical abstract provides a preview of the primary sections covered in this review. This paper presents a comprehensive examination of the biotechnological applications and metabolites of actinobacteria, highlighting their potential for patent innovations.

Trends in the Diversification of the Detergentome

Detergents are amphiphilic molecules that serve as enabling steps for today's world applications. The increasing diversity of the detergentome is key to applications enabled by detergent science. Regardless of the application, the optimal design of detergents is determined empirically, which leads to failed preparations, and raising costs. To facilitate project planning, here we review synthesis strategies that drive the diversification of the detergentome. Synthesis strategies relevant for industrial and academic applications include linear, modular, combinatorial, bio-based, and metric-assisted detergent synthesis. Scopes and limitations of individual synthesis strategies in context with industrial product development and academic research are discussed. Furthermore, when designing detergents, the selection of molecular building blocks, i. e., head, linker, tail, is as important as the employed synthesis strategy. To facilitate the design of safe-to-use and tailor-made detergents, we provide an overview of established head, linker, and tail groups and highlight selected scopes and limitations for applications. It becomes apparent that most recent contributions to the increasing chemical diversity of detergent building blocks originate from the development of detergents for membrane protein studies. The overview of synthesis strategies and molecular blocks will bring us closer to the ability to predictably design and synthesize optimal detergents for challenging future applications.

Characterization and Production of a Biosurfactant Viscosin from Pseudomonas sp. HN11 and its Application on Enhanced oil Recovery During oily Sludge Cleaning

Biosurfactants are renewable resources with versatile applications on environmental bioremediation and industrial processes. Pseudomonas species are one of the promising biosurfactant producers. However, besides rhamnolipids, little is known about Pseudomonas-derived biosurfactants on solubilization of polycyclic aromatic hydrocarbons (PAHs) and oily sludge treatment. In this study, Pseudomonas sp. HN11-derived biosurfactant was purified by chromatographic methods and was characterized as viscosin via bioinformatic analysis, spectrometric and spectroscopic analyses, Marfey's method and (C-H)α NMR fingerprint matching approach. Viscosin is a potent biosurfactant with critical micelle concentration of 5.79 mg/L and is stable under various stresses. Moreover, viscosin was produced at 0.42 g/L at 48 h of liquid fermentation. Further data have shown that emulsifying agent viscosin is capable of promoting the solubilization of PAHs and displays enhanced oil recovery during oily sludge treatment. More specifically, viscosin has shown significantly enhanced solubilization on fluoranthene compared with control (0.04 mg/L), 2.21 mg/L and 1.27 mg/L fluoranthene was recovered from 100 mg/L and 200 mg/L viscosin treatment, respectively. However, only 200 mg/L viscosin has significantly enhanced the solubilization of phenanthrene (0.75 mg/L) and benzo[a]pyrene (0.51 mg/L) compared to each control (0.23 mg/L for phenanthrene and 0.09 mg/L for benzo[a]pyrene). Viscosin treatment of oily sludge (recovering of 0.58 g oil) has shown a significant oil recovery compared to that of control (recovering of 0.42 g oil). This study shows the great potential of viscosin-type biosurfactant on oily sludge treatment.

Microbial Biosurfactant: Candida bombicola as a Potential Remediator of Environments Contaminated by Heavy Metals

Industrial interest in surfactants of microbial origin has intensified recently due to the characteristics of these compounds, such as biodegradability and reduced toxicity, and their efficiency in removing heavy metals and hydrophobic organic compounds from soils and waters. The aim of this study was to produce a biosurfactant using Candida bombicola URM 3712 in a low-cost medium containing 5.0% molasses, 3.0% corn steep liquor and 2.5% residual frying oil for 144 h at 200 rmp. Measurements of engine oil tension and emulsification were made under extreme conditions of temperature (0 °C, 5 °C, 70 °C, 100 °C and 120 °C), pH (2-12) and NaCl concentrations (2-12), demonstrating the stability of the biosurfactant. The isolated biosurfactant was characterized as an anionic molecule with the ability to reduce the surface tension of water from 72 to 29 mN/m, with a critical micellar concentration of 0.5%. The biosurfactant had no toxic effect on vegetable seeds or on Eisenia fetida as a bioindicator. Applications in the removal of heavy metals from contaminated soils under dynamic conditions demonstrated the potential of the crude and isolated biosurfactant in the removal of Fe, Zn and Pb with percentages between 70 and 88%, with the highest removal of Pb being 48%. The highest percentage of removal was obtained using the cell-free metabolic liquid, which was able to remove 48, 71 and 88% of lead, zinc and iron from the soil, respectively. Tests in packed columns also confirmed the biosurfactant's ability to remove Fe, Zn and Pb between 40 and 65%. The removal kinetics demonstrated an increasing percentage, reaching removal of 50, 70 and 85% for Pb, Zn and Fe, respectively, reaching a greater removal efficiency at the end of 24 h. The biosurfactant was also able to significantly reduce the electrical conductivity of solutions containing heavy metals. The biosurfactant produced by Candida bombicola has potential as an adjuvant in industrial processes for remediating soils and effluents polluted by inorganic contaminants.

Enhancing rhamnolipid production through a two-stage fermentation control strategy based on metabolic engineering and nitrate feeding

Nitrate plays a crucial role in the high-efficient fermentation production of rhamnolipids (RLs). However, the underlying mechanism remains unclear. Firstly, by knocking out the restriction endonuclease PaeKI and utilizatiing the endogenous CRISPR-Cas-mediated single-plasmid recombineering system, a genome editing system for P. aeruginosa KT1115 has been established. Secondly, an engineered strain KT1115ΔpaeKIΔnirS was obtained with a 87% of reduction in nitric oxide (NO) accumulation and a 93% of reduction in RLs production, revealing the crucial role of NO signaling molecule produced from nitrate metabolism in RLs production. Finally, by combining metabolic engineering of the nitrate metabolism pathway with nitrogen feeding, a new two-stage fermentation process was developed. The fermentation production period was reduced from 168 h to 120 h while achieving a high yield of 0.8 g/g, and the average productivity increased by 55%. In all, this study provides a novel insights in the RLs biosynthesis and fermentation control strategy.

CRISPR-Cas technology secures sustainability through its applications: a review in green biotechnology

The CRISPR-Cas system's applications in biotechnology offer a promising avenue for addressing pressing global challenges, such as climate change, environmental pollution, the energy crisis, and the food crisis, thereby advancing sustainability. The ever-growing demand for food due to the projected population of around 9.6 billion by 2050 requires innovation in agriculture. CRISPR-Cas technology emerges as a powerful solution, enhancing crop varieties, optimizing yields, and improving resilience to stressors. It offers multiple gene editing, base editing, and prime editing, surpassing conventional methods. CRISPR-Cas introduces disease and herbicide resistance, high-yielding, drought-tolerant, and water-efficient crops to address rising water utilization and to improve the efficiency of agricultural practices which promise food sustainability and revolutionize agriculture for the benefit of future generations. The application of CRISPR-Cas technology extends beyond agriculture to address environmental challenges. With the adverse impacts of climate change and pollution endangering ecosystems, there is a growing need for sustainable solutions. The technology's potential in carbon capture and reduction through bio-sequestration is a pivotal strategy for combating climate change. Genomic advancements allow for the development of genetically modified organisms, optimizing biofuel and biomaterial production, and contributing to a renewable and sustainable energy future. This study reviews the multifaceted applications of CRISPR-Cas technology in the agricultural and environmental fields and emphasizes its potential to secure a sustainable future.

Copper and chromium removal from industrial sludge by a biosurfactant-based washing agent and subsequent recovery by iron oxide nanoparticles

Industrial wastewater treatment generates sludge with high concentrations of metals and coagulants, which can cause environmental problems. This study developed a sequential sludge washing and metal recovery process for industrial sludge containing > 4500 mg/kg Cu and > 5000 mg/kg Cr. The washing agent was formulated by mixing glycolipid, lipopeptide, and phospholipid biosurfactants from Weissella cibaria PN3 and Brevibacterium casei NK8 with a chelating agent, ethylenediaminetetraacetic acid (EDTA). These biosurfactants contained various functional groups for capturing metals. The optimized formulation by the central composite design had low surface tension and contained relatively small micelles. Comparable Cu and Cr removal efficiencies of 37.8% and 38.4%, respectively, were obtained after washing the sludge by shaking with a sonication process at a 1:4 solid-to-liquid ratio. The zeta potential analysis indicated the bonding of metal ions on the surface of biosurfactant micelles. When 100 g/L iron oxide nanoparticles were applied to the washing agent without pH adjustment, 83% Cu and 100% Cr were recovered. In addition, X-ray diffraction and X-ray absorption spectroscopy of the nanoparticles showed the oxidation of nanoparticles, the reduction of Cr(V) to the less toxic Cr(III), and the absorption of Cu. The recovered metals could be further recycled, which will be beneficial for the circular economy.

Natural surfactant mediated bioremediation approaches for contaminated soil

The treatment of environmental pollution by employing microorganisms is a promising technology, termed bioremediation, which has several advantages over the other established conventional remediation techniques. Consequently, there is an urgent inevitability to develop pragmatic techniques for bioremediation, accompanied by the potency of detoxifying soil environments completely. The bioremediation of contaminated soils has been shown to be an alternative that could be an economically viable way to restore polluted soil. The soil environments have long been extremely polluted by a number of contaminants, like agrochemicals, polyaromatic hydrocarbons, heavy metals, emerging pollutants, etc. In order to achieve a quick remediation overcoming several difficulties the utility of biosurfactants became an excellent advancement and that is why, nowadays, the biosurfactant mediated recovery of soil is a focus of interest to the researcher of the environmental science field specifically. This review provides an outline of the present scenario of soil bioremediation by employing a microbial biosurfactant. In addition to this, a brief account of the pollutants is highlighted along with how they contaminate the soil. Finally, we address the future outlook for bioremediation technologies that can be executed with a superior efficiency to restore a polluted area, even though its practical applicability has been cultivated tremendously over the few decades.

Biosurfactant from Pseudomonas fragi enhances the competitive advantage of Pseudomonas but reduces the overall spoilage ability of the microbial community in chilled meat

Biosurfactants from Pseudomonas spp. have been reported to exhibit antibacterial and anti-adhesive properties, but their role during meat spoilage remains unclear. In this study, the biosurfactant was isolated from an isolate of Pseudomonas fragi with strong spoilage potential, and its surface tension and emulsification ability were determined. The chemical and microbial characteristics of the biosurfactant-treated meat samples were periodically analyzed. The results demonstrated that the biosurfactant produced by P. fragi could reduce surface tension and showed good emulsification properties. For the in situ spoilage trials, biosurfactant from P. fragi changed the microbial diversity on meat, helping Pseudomonas establish a dominant position in the population. However, biosurfactant treatment caused chicken meat to exhibit a weaker spoilage state, as indicated by the growth of psychrophilic microorganisms, total volatile basic nitrogen (TVBN) and meat color. These results provide practical information for understanding the role of P. fragi biosurfactant during chilled meat storage.

Importance of microbial amphiphiles: interaction potential of biosurfactants, amyloids, and other exo-polymeric-substances

Microorganisms produce a diverse group of biomolecules having amphipathic nature (amphiphiles). Microbial amphiphiles, including amyloids, bio-surfactants, and other exo-polymeric substances, play a crucial role in various biological processes and have gained significant attention recently. Although diverse in biochemical composition, these amphiphiles have been reported for common microbial traits like biofilm formation and pathogenicity due to their ability to act as surface active agents with active interfacial properties essential for microbes to grow in various niches. This enables microbes to reduce surface tension, emulsification, dispersion, and attachment at the interface. In this report, the ecological importance and biotechnological usage of important amphiphiles have been discussed. The low molecular weight amphiphiles like biosurfactants, siderophores, and peptides showing helical and antimicrobial activities have been extensively reported for their ability to work as quorum-sensing mediators. While high molecular weight amphiphiles make up amyloid fibers, exopolysaccharides, liposomes, or magnetosomes have been shown to have a significant influence in deciding microbial physiology and survival. In this report, we have discussed the functional similarities and biochemical variations of several amphipathic biomolecules produced by microbes, and the present report shows these amphiphiles showing polyphyletic and ecophysiological groups of microorganisms and hence can `be replaced in biotechnological applications depending on the compatibility of the processes.

Harnessing the Potential of Biosurfactants for Biomedical and Pharmaceutical Applications

Biosurfactants (BSs) are microbial compounds that have emerged as potential alternatives to chemical surfactants due to their multifunctional properties, sustainability and biodegradability. Owing to their amphipathic nature and distinctive structural arrangement, biosurfactants exhibit a range of physicochemical properties, including excellent surface activity, efficient critical micelle concentration, humectant properties, foaming and cleaning abilities and the capacity to form microemulsions. Furthermore, numerous biosurfactants display additional biological characteristics, such as antibacterial, antifungal and antiviral effects, and antioxidant, anticancer and immunomodulatory activities. Over the past two decades, numerous studies have explored their potential applications, including pharmaceuticals, cosmetics, antimicrobial and antibiofilm agents, wound healing, anticancer treatments, immune system modulators and drug/gene carriers. These applications are particularly important in addressing challenges such as antimicrobial resistance and biofilm formations in clinical, hygiene and therapeutic settings. They can also serve as coating agents for surfaces, enabling antiadhesive, suppression, or eradication strategies. Not least importantly, biosurfactants have shown compatibility with various drug formulations, including nanoparticles, liposomes, micro- and nanoemulsions and hydrogels, improving drug solubility, stability and bioavailability, and enabling a targeted and controlled drug release. These qualities make biosurfactants promising candidates for the development of next-generation antimicrobial, antibiofilm, anticancer, wound-healing, immunomodulating, drug or gene delivery agents, as well as adjuvants to other antibiotics. Analysing the most recent literature, this review aims to update the present understanding, highlight emerging trends, and identify promising directions and advancements in the utilization of biosurfactants within the pharmaceutical and biomedical fields.