Favorable effects of superficially deacetylated chitin nanofibrils on the wound healing process

Therapeutic effects of electrospun chitosan nanofibers on animal skin wounds: A systematic review and meta-analysis

Electrospun chitosan nanofibers (QSNFs) enhance the healing process by mimicking skin structure and function. The aim of this study was to analyze the therapeutic effects of QSNFs application on animal skin wounds to identify a potential direction for translational research in dermatology. The PRISMA methodology and the PICO scheme were used. A random effects model and mean difference analysis were applied for the meta-analysis. A meta-regression model was constructed, risk of bias was determined, and methodological quality assessment was performed. Of the 2370 articles collected, 54 studies were selected based on the inclusion and exclusion criteria. The wound healing area was used for building models on the 3rd, 7th, and 14th days of follow-up; the results were - 10.4% (95% CI, -18.2% to -2.6%, p = 0.001), -21.0% (95% CI, -27.3% to -14.7%, p = 0.001), and - 14.0% (95% CI, -19.1 to -8.8%, p = 0.001), respectively. Antioxidants and synthetic polymers combined with QSNFs further reduced skin wound areas (p < 0.05). The results show a more efficient reduction in wound area percentages in experimental groups than in control groups, so QSNFs could potentially be applied in translational human medicine research.

Revealing the Control Mechanisms of pH on the Solution Properties of Chitin via Single-Molecule Studies

Chitin is one of the most common polysaccharides and is abundant in the cell walls of fungi and the shells of insects and aquatic organisms as a skeleton. The mechanism of how chitin responds to pH is essential to the precise control of brewing and the design of smart chitin materials. However, this molecular mechanism remains a mystery. Results from single-molecule studies, including single-molecule force spectroscopy (SMFS), AFM imaging, and molecular dynamic (MD) simulations, have shown that the mechanical and conformational behaviors of chitin molecules show surprising pH responsiveness. This can be compared with how, in natural aqueous solutions, chitin tends to form a more relaxed spreading conformation and show considerable elasticity under low stretching forces in acidic conditions. However, its molecular chain collapses into a rigid globule in alkaline solutions. The results show that the chain state of chitin can be regulated by the proportions of inter- and intramolecular H-bonds, which are determined via the number of water bridges on the chain under different pH values. This basic study may be helpful for understanding the cellular activities of fungi under pH stress and the design of chitin-based drug carriers.

Nanochitin: Chemistry, Structure, Assembly, and Applications

Chitin, a fascinating biopolymer found in living organisms, fulfills current demands of availability, sustainability, biocompatibility, biodegradability, functionality, and renewability. A feature of chitin is its ability to structure into hierarchical assemblies, spanning the nano- and macroscales, imparting toughness and resistance (chemical, biological, among others) to multicomponent materials as well as adding adaptability, tunability, and versatility. Retaining the inherent structural characteristics of chitin and its colloidal features in dispersed media has been central to its use, considering it as a building block for the construction of emerging materials. Top-down chitin designs have been reported and differentiate from the traditional molecular-level, bottom-up synthesis and assembly for material development. Such topics are the focus of this Review, which also covers the origins and biological characteristics of chitin and their influence on the morphological and physical-chemical properties. We discuss recent achievements in the isolation, deconstruction, and fractionation of chitin nanostructures of varying axial aspects (nanofibrils and nanorods) along with methods for their modification and assembly into functional materials. We highlight the role of nanochitin in its native architecture and as a component of materials subjected to multiscale interactions, leading to highly dynamic and functional structures. We introduce the most recent advances in the applications of nanochitin-derived materials and industrialization efforts, following green manufacturing principles. Finally, we offer a critical perspective about the adoption of nanochitin in the context of advanced, sustainable materials.

Optimization of Chitin Nanofiber Preparation by Ball Milling as Filler for Composite Resin

Chitin nanofiber is a nanomaterial produced by pulverizing chitin, the main component of crab shells. Since it has excellent mechanical properties, it is expected to be used as a reinforcing material to strengthen materials. Chitin was mechanically ground in water using a ball mill to prepare nanofibers. The ball size, total ball weight, and milling time were varied, and the resulting water dispersion and the cast film were analyzed to optimize the conditions for efficient preparation. The length and width of the nanofibers were also measured by SEM and AFM observations. The size of the balls affected the level of grinding and the intensity of impact energy on the chitin. The most efficient crushing was achieved when the diameter was 1 mm. The total ball weight directly affects the milling frequency, and milling proceeds as the total weight increases. However, if too many balls occupy the container, the grinding efficiency decreases. Therefore, a total ball weight of 300 g was optimal. Regarding the milling time, the chitin becomes finer depending on the increase of that time. However, after a specific time, the shape did not change much. Therefore, a milling time of approximately 150 min was appropriate.

Production of chitin nanoparticles by bottom-up approach from alkaline chitin solution

Most of the series of nanochitins have been produced by the break-down process. In this study, chitin nanoparticles were prepared by a bottom-up process. Chitin was treated with sodium hydroxide to obtain an alkaline chitin aqueous solution. The alkaline chitin was regenerated by neutralization and then vigorously stirred to obtain chitin nanoparticles. The average particle size of the chitin nanoparticles was 7 nm. The individual particles were stably dispersed in water. Chitin nanoparticles had lower crystallinity than the raw material chitin and the surface of the chitin nanoparticles regenerated in water were presumed to be hydrophilic. The low crystallinity and the high hydrophilicity of the surface contributed to the high dispersibility of the chitin nanoparticles in water. Chitin nanoparticles had higher heat resistance than the raw material chitin, suggesting a large change in the higher-order structure associated with dissolution and subsequent regeneration of chitin. Since chitin nanoparticles interact with each other less than chitin nanofibers produced by mechanical treatment, the viscosity of nanoparticles was smaller than that of nanofibers. Therefore, it can be prepared at a high concentration. In addition, the chitin nanoparticles can be easily redispersed in water after being concentrated by centrifugation.

Optimum Preparation Conditions for Highly Individualized Chitin Nanofibers Using Ultrasonic Generator

α-Chitin derived from crab shells was treated with 30% sodium hydroxide to prepare partially deacetylated chitin with a deacetylation degree of 36%. Partially deacetylated chitin nanofibers were prepared by applying weak ultrasonic energy generated by a domestic ultrasonic cleaner. The deacetylated chitin was easily disintegrated into nanofibers with the aid of electrostatic repulsion and osmotic pressure effect of amino cations on the chitin surfaces. The nanofibers were characterized in terms of yield, morphology, crystallinity, viscosity, and dispersibility. After a series of characterizations, ultrasonication with 45 kHz frequency and 20 min treatment was found to be the optimum conditions for obtaining fine nanofibers with a high yield.

Chitin and chitosan on the nanoscale

In a matter of decades, nanomaterials from biomass, exemplified by nanocellulose, have rapidly transitioned from once being a subject of curiosity to an area of fervent research and development, now reaching the stages of commercialization and industrial relevance. Nanoscale chitin and chitosan, on the other hand, have only recently begun to raise interest. Attractive features such as excellent biocompatibility, antibacterial activity, immunogenicity, as well as the tuneable handles of their acetylamide (chitin) or primary amino (chitosan) functionalities indeed display promise in areas such as biomedical devices, catalysis, therapeutics, and more. Herein, we review recent progress in the fabrication and development of these bio-nanomaterials, describe in detail their properties, and discuss the initial successes in their applications. Comparisons are made to the dominant nanocelluose to highlight some of the inherent advantages that nanochitin and nanochitosan may possess in similar application.

Edible Materials in Tissue Regeneration

Edible materials have attracted increasing attention because of their excellent properties including availability, biocompatibility, biological activity, and biodegradability. Natural polysaccharides, phenolic compounds, and proteins are widely used in tissue regeneration. To better characterize their healing effect, this review article describes the applications of edible materials in tissue regeneration including wound healing and bone tissue regeneration. As an introduction to the topic, their sources and main bioactive properties are discussed. Then, the mechanism by which they facilitate wound healing based on their hemostasis, antibacterial, anti-inflammatory, and antioxidant properties is systematically investigated. Moreover, a more comprehensive discussion is presented on the approaches by which edible materials can be used as scaffolds or agents for the provision of the components of natural bones for regulating the level of osteogenesis-related cytokines to enhance bone repair. Finally, the prospects of edible materials for tissue regeneration are discussed.

Advances in carbohydrate-based polymers for the design of suture materials: A review

Suture materials constitute one of the largest biomedical material groups with a huge global market of $ 1.3 billion annually and employment in over 12 million procedures per year. Suture materials have radically evolved over the years, from basic strips of linen to more advanced synthetic polymer sutures. Yet, the journey to the ideal suture material is far from over and we now stand on the brink of a new era of improved suture materials with greater safety and efficacy. This next step in the evolutionary timeline of suture materials, involves the use of natural, carbohydrate polymers that have, until recent years, never before been considered for suture material applications. This review exposes the latest and most important advancements in suture material development while digging deep into how natural, carbohydrate polymers can serve to advance this field.

Insect Chitin-Based Nanomaterials for Innovative Cosmetics and Cosmeceuticals

Chitin and its derivatives are attracting great interest in cosmetic and cosmeceutical fields, thanks to their antioxidant and antimicrobial properties, as well as their biocompatibility and biodegradability. The classical source of chitin, crustacean waste, is no longer sustainable and fungi, a possible alternative, have not been exploited at an industrial scale yet. On the contrary, the breeding of bioconverting insects, especially of the Diptera Hermetia illucens, is becoming increasingly popular worldwide. Therefore, their exoskeletons, consisting of chitin as a major component, represent a waste stream of facilities that could be exploited for many applications. Insect chitin, indeed, suggests its application in the same fields as the crustacean biopolymer, because of its comparable commercial characteristics. This review reports several cosmetic and cosmeceutical applications based on chitin and its derivatives. In this context, chitin nanofibers and nanofibrils, produced from crustacean waste, have proved to be excellent cosmeceutical active compounds and carriers of active ingredients in personal care. Consequently, the insect-based chitin, its derivatives and their complexes with hyaluronic acid and lignin, as well as with other chitin-derived compounds, may be considered a new appropriate potential polymer to be used in cosmetic and cosmeceutical fields.

Systematic Development and Characterization of Novel, High Drug-Loaded, Photostable, Curcumin Solid Lipid Nanoparticle Hydrogel for Wound Healing

The study aims to develop high drug-loaded (about 15% lipid matrix) curcumin solid lipid nanoparticles (CSLNs) for wound healing. CSLNs prepared by hot, high-pressure homogenization, without using organic solvents, were optimized using the Taguchi design followed by the central composite design. The optimized CSLNs exhibited a high assay/drug content (0.6% w/w), solubility (6 × 105 times), and EE (75%) with a particle size < 200 nm (PDI-0.143). The CSLNs were safe (in vitro and in vivo), photostable, autoclavable, stable up to one year at 30 °C and under refrigeration and exhibited a controlled release (zero-order; 5 days). XRD, FTIR, and DSC confirmed solubilization and entrapment of the curcumin within the SLNs. TEM and FESEM revealed a smooth and spherical shape. The CSLNs showed a significant antimicrobial effect (MIC of 64 µg/mL for planktonic cells; 512 µg/mL for biofilm formation; and 2 mg/mL for mature biofilm) against Staphylococcus aureus 9144, while free curcumin dispersion did not exhibit any effect. This is the first report on the disruption of mature biofilms by curcumin solid lipid nanoparticles (CSLNs). The cell proliferation potential of CSLNs was also evaluated in vitro while the wound healing potential of CSLNs (incorporated in a hydrogel) was assessed in vivo. In (i) nitrogen mustard gas and (ii) a full-thickness excision wound model, CSLNs exhibited (a) significantly faster wound closure, (b) histologically and immunohistochemically better healing, (c) lower oxidative stress (LPO) and (d) inflammation (TNFα), and (e) increased angiogenesis (VEGF) and antioxidant enzymes, i.e., catalase and GSH levels. CSLNs thus offer a promising modern wound therapy especially for infected wounds, considering their effects in mature biofilm disruption.

Effect of the Degree of Acetylation of Chitin Nonwoven Fabrics for Promoting Wound Healing

Chitin and chitosan have been extensively used as wound dressings because of their special functions to promote wound healing. However, there was little focus on the effects of the degree of acetylation (DA) on wound healing. In this work, the regenerated chitin nonwoven fabrics with DA values of 90, 71, 60, and 42% were prepared, and the morphology and physical performances of the fabrics were characterized. Moreover, the effects of DA of the chitin nonwoven fabrics on wound recovery were studied with a full-thickness skin defect model in rats. In vitro experiments indicated that the chitin nonwoven fabrics exhibited good biocompatibility and blood compatibility and a low blood-clotting index (BCI). In vivo experiments revealed that the chitin nonwoven fabrics could accelerate wound healing more effectively than gauze by promoting re-epithelialization and collagen deposition as well as by stimulating neovascularization. The results of the wound healing process showed that DA of the chitin nonwoven fabrics had a profound effect on promoting wound healing. Notably, the regenerated chitin nonwoven fabrics with 71% DA significantly improved the wound healing compared to the commercial wound dressing Algoplaque film. Therefore, the regenerated chitin nonwoven fabrics are promising candidates for wound healing.

Maria H, Gopi S, Volova T, C. M. Fernandes S, Thomas S. Extraction of Nanochitin from Marine Resources and Fabrication of Polymer Nanocomposites: Recent Advances

Industrial sea food residues, mainly crab and shrimp shells, are considered to be the most promising and abundant source of chitin. In-depth understanding of the biological properties of chitin and scientific advancements in the field of nanotechnology have enabled the development of high-performance chitin nanomaterials. Nanoscale chitin is of great economic value as an efficient functional and reinforcement material for a wide range of applications ranging from water purification to tissue engineering. The use of polymers and nanochitin to produce (bio) nanocomposites offers a good opportunity to prepare bioplastic materials with enhanced functional and structural properties. Most processes for nanochitin isolation rely on the use of chemical, physical or mechanical methods. Chitin-based nanocomposites are fabricated by various methods, involving electrospinning, freeze drying, etc. This review discusses the progress and new developments in the isolation and physico-chemical characterization of chitin; it also highlights the processing of nanochitin in various composite and functional materials.

Chitin and Chitinases: Biomedical And Environmental Applications of Chitin and its Derivatives

Disposal of chitin wastes from crustacean shell can cause environmental and health hazards. Chitin is a well known abundant natural polymer extracted after deproteinization and demineralization of the shell wastes of shrimp, crab, lobster, and krill. Extraction of chitin and its derivatives from waste material is one of the alternative ways to turn the waste into useful products. Chitinases are enzymes that degrade chitin. Chitinases contribute to the generation of carbon and nitrogen in the ecosystem. Chitin and chitinolytic enzymes are gaining importance for their biotechnological applications. The presence of surface charge and multiple functional groups make chitin as a beneficial natural polymer. Due to the reactive functional groups chitin can be used for the preparation of a spectrum of chitin derivatives such as chitosan, alkyl chitin, sulfated chitin, dibutyryl chitin and carboxymethyl chitin for specific applications in different areas. The present review is aimed to summarize the efficacy of the chitinases on the chitin and its derivatives and their diverse applications in biomedical and environmental field. Further this review also discusses the synthesis of various chitin derivatives in detail and brings out the importance of chitin and its derivatives in biomedical and environmental applications.

A novel exopolysaccharide from marine bacterium Pantoea sp. YU16-S3 accelerates cutaneous wound healing through Wnt/β-catenin pathway

Natural polysaccharides with versatile properties are the potential candidates for wound healing applications. In this study, an exopolysaccharide, EPS-S3, isolated from a marine bacteria Pantoea sp. YU16-S3 was evaluated for its wound-healing abilities by studying the key molecular mechanisms in vitro and in vivo. Basic characterisation showed EPS-S3 as a heteropolysaccharide with glucose, galactose, N-acetyl galactosamine and glucosamine. The molecular weight of EPS-S3 was estimated to be 1.75 × 10⁵ Da. It showed thermal stability up to 200 °C and shear-thickening non-Newtonian behaviour. It was biocompatible with dermal fibroblasts and keratinocytes and showed cell adhesion and cell proliferation properties. EPS-S3 facilitated cell migration in fibroblasts, induced rapid transition of cell cycle phases and also activated macrophages. In vivo experiments in rats showed the re-epithelialization of injured tissue with increased expression of HB-EGF, FGF, E-cadherin and β-catenin in EPS-S3 treatment. The results indicate that EPS-S3 modulates healing process through Wnt/β-catenin pathway due to its unique characteristics. In conclusion, EPS-S3 biosynthesized by the marine bacterium is a potential biomolecule for cutaneous wound healing applications.

Preparation, Mechanical Properties, and Biocompatibility of Graphene Oxide-Reinforced Chitin Monofilament Absorbable Surgical Sutures

Chitin (CT) is a good material to prepare surgical sutures due to its conspicuous biological characteristics. However, the poor mechanical strength of pure CT sutures limits its application. In order to improve its strength, a composite monofilament absorbable suture was prepared in this study using graphene oxide and chitin (GO-CT) using a green method. FT-IR spectra showed that GO-CT contained the characteristic functional groups of GO and CT, indicating that a GO-CT suture was successfully obtained. With the addition of a small amount of GO (1.6wt% solution) in chitin, the breaking tensile strength, knot strength, and knot-pull strength of the GO-CT suture were significantly improved compared to the CT suture. The biocompatibility of the GO-CT suture in vitro was checked by tetrazolium-based colorimetric assays and no cytotoxicity to L929 cells was found. In vivo, the subcutaneous implantation of GO-CT sutures in the dorsal skin of rats found no abnormalities by hematoxylin-eosin staining. Furthermore, there were no significant changes in the gene expression of the inflammatory mediators, interleukin 1β (IL-1β), tumor necrosis factor-α, IL-6, IL-17A, interferon-γ, or IL-10; however, the expression of transforming growth factor β was significantly increased in the first week. In summary, GO-CT sutures may have potential as a suture material in the clinic.

Preparation of β-chitin nanofiber aerogels by lyophilization

In this study, chitin nanofiber dispersions prepared in neutral and acidic pH conditions were lyophilized to produce aerogels. The effects of the freezing speed of the nanofiber dispersions and the dispersibility of the chitin nanofiber were studied. The characteristics of the aerogels were studied using scanning electron microscopy, relative surface area measurements, and compression tests. The repulsion forces of the chitin nanofiber in acidic conditions were effective in the formation of a more uniform microstructure during water solidification, resulting in aerogels with a high mechanical strength. The aerogel made from the chitin nanofiber dispersion prepared in neutral conditions was influenced by ice crystal growth during freezing, resulting in a nonuniform structure. In contrast, the surface area of the aerogel in neutral conditions interestingly remained unchanged compared to that of the original powder, which was due to the morphological transformation.

Hair growth-promoting activities of chitosan and surface-deacetylated chitin nanofibers

In this study, the effects of chitosan and surface-deacetylated chitin nanofibrils (SDACNFs) on hair growth were evaluated. In human follicle dermal papilla cells in vitro, chitosan and SDACNFs were shown to increase cell growth on day 3 after the initiation of treatment, together with an increase in the production of fibroblast growth factor-7 (FGF-7) by these cells on day 3. Furthermore, in an in vivo study in mice, chitosan and SDACNF application promoted hair growth. The number of anagen follicles significantly increased compared with that in the control group, whereas the number of telogen follicles significantly decreased in the chitosan and SDACNF groups. In the chitosan and SDACNFs groups, moreover, the expression levels of FGF-7 and Sonic hedgehog were significantly upregulated in hair follicles. Overall, our results demonstrated that chitosan and SDACNFs promoted hair growth and therefore may have applications as novel therapeutic agents for the treatment of hair loss in patients.

Preparation and evaluation of freeze dried surface-deacetylated chitin nanofiber/sacran pellets for use as an extended-release excipient

Pelleted preparations were formulated from sacran (Sac), an anionic, sulfated, carboxyl-containing polysaccharide, which is extracted from the Japanese indigenous cyanobacterium Aphanothece sacrum, and surface-deacetylated chitin nanofibers (SDACNF). The use of this material as an extended-release excipient for tetrahydrocurcumin (THC), a model drug that is used to treat wounds via its radical scavenging ability was examined. The THC used in the study was complexed with 2-hydroxypropyl-β-cyclodextrin (HP-β-CD), which increases its water solubility. The radical scavenging activity of the THC/HP-β-CD complex (molar ratio of 1:1) was significantly higher than the values for SDACNF or Sac alone. The rate of release of THC from the Sac/SDACNF pellets containing the THC/HP-β-CD complex decreased with increasing Sac content in the pellet, suggesting that Sac/SDACNF (1:1) and Sac alone pellets function as extended-release excipients for THC. The findings reported here indicate that this can be attributed to the ability of the Sac component to retain fluids, thus extending the effects of the drug. In view of the above experimental outcomes, i.e. wound healing efficacy, fluid absorption, retention and the extended drug release of the system indicates that this preparation, in the appropriate ratios, has the potential for use as a controlled-release drug in wound healing.

Biopolymer nanofibrils: structure, modeling, preparation, and applications

Biopolymer nanofibrils exhibit exceptional mechanical properties with a unique combination of strength and toughness, while also presenting biological functions that interact with the surrounding environment. These features of biopolymer nanofibrils profit from their hierarchical structures that spun angstrom to hundreds of nanometer scales. To maintain these unique structural features and to directly utilize these natural supramolecular assemblies, a variety of new methods have been developed to produce biopolymer nanofibrils. In particular, cellulose nanofibrils (CNFs), chitin nanofibrils (ChNFs), silk nanofibrils (SNFs) and collagen nanofibrils (CoNFs), as the four most abundant biopolymer nanofibrils on earth, have been the focus of research in recent years due to their renewable features, wide availability, low-cost, biocompatibility, and biodegradability. A series of top-down and bottom-up strategies have been accessed to exfoliate and regenerate these nanofibrils for versatile advanced applications. In this review, we first summarize the structures of biopolymer nanofibrils in nature and outline their related computational models with the aim of disclosing fundamental structure-property relationships in biological materials. Then, we discuss the underlying methods used for the preparation of CNFs, ChNFs, SNF and CoNFs, and discuss emerging applications for these biopolymer nanofibrils.

Preparation of chitin-amphipathic anion/quaternary ammonium salt ecofriendly dressing and its effect on wound healing in mice

Objective

This study aimed to prepare an eco-friendly dressing using a chitin-derived membrane with amphipathic anion/quaternary ammonium salt designed for antibacterial purposes.

Methods

Four dressings were prepared and group A was chitin, group B was chitin + amphiphilic ion, group C was chitin + quaternary ammonium salt, group D was chitin + amphiphilic ion + quaternary ammonium salt.

Results

In the group D material, precipitation of adherent composite ions was observed. The contact angle test showed that the material was hydrophilic. The drug loading rate in groups B, C, and D was 40-50 (ug:mg), the entrapment efficiency was 70%-75% (P>0.05), and the cumulative release percentages were 87.3%, 88.7%, and 90.2% after 72h for group B, C, and D, respectively. The anti-bacterial activity in vitro was in the order D>C>B>A> control (P>0.05). The anti-pollution activity in vitro was in the order D>B>C>A (P<0.05). The cell proliferation inhibition test showed slight proliferation inhibition (P<0.05) only on the seventh day for group D. Seven days after injury, the wound healing rate was in the order D>C> commercial chitin dressing >B>A> control (P<0.05), and the length of the neonatal epithelium also showed the same trend. Additionally, PCNA and CD31 expression indicated that cell proliferation and angiogenesis were enhanced when skin defects were covered with the D group material (P<0.05).

Conclusion

chitin-amphiphilic ion/quaternary ammonium salt dressing was successfully prepared. The antibacterial and antipollution effects of the prepared material (group D) were both very good, acting to promote wound healing.

Chitin, chitinases, and chitin lectins: Emerging roles in human pathophysiology

Chitin is a simple β-linked repeating sugar polymer prominent in the building block structures of a wide variety of organisms, from the yeast cell wall to the exoskeleton and shells of arthropods and other forms of invertebrate life. It had previously been assumed that vertebrates did not contain chitins. However, chitin and chitinases are now documented to occur in vertebrate tissues. Chitin, chitinases and particularly chitinase-like proteins are involved in important human pathologies, though the mechanisms by which these function is unknown. These chitinase-like proteins bind to chitin and function as chitin lectins in that they bind to chitin but have lost the ability to degrade it. Emphasis is placed on one of the chitinase-like proteins, CHI3L1, that has acquired wide clinical importance. The purpose of this review is to place an array of bewildering observations associated with various human disorders into a framework, particularly the pathologies of the human gastro-intestinal tract. A reasonably cohesive story may eventually emerge.

Effect of acidity on the physicochemical properties of α- and β-chitin nanofibers

We have investigated whether acidity can be used to control the physicochemical properties of chitin nanofibers (ChNFs). In this study, we define acidity as the molar ratio of dissociated protons from the acid to the amino groups in the raw chitin powder. The effect of acidity on the physicochemical properties of α- and β-ChNFs was compared. The transmittance and viscosity of the β-ChNFs drastically and continuously increased with increasing acidity, while those of the α-ChNFs were not affected by acidity. These differences are because of the higher ability for cationization based on the more flexible crystal structure of β-chitin than α-chitin. In addition, the effect of the acid species on the transmittance of β-ChNFs was investigated. The transmittance of β-ChNFs can be expressed by the acidity regardless of the acid species, such as hydrochloric acid, phosphoric acid, and acetic acid. These results indicate that the acidity defined in this work is an effective parameter to define and control the physicochemical properties of ChNFs.

Oral Administration of Surface-Deacetylated Chitin Nanofibers and Chitosan Inhibit 5-Fluorouracil-Induced Intestinal Mucositis in Mice

This study investigated the prophylactic effects of orally administered surface-deacetylated chitin nanofibers (SDACNFs) and chitosan against 5-fluorouracil (5-FU)-induced intestinal mucositis, which is a common side effect of 5-FU chemotherapy. SDACNFs and chitosan abolished histological abnormalities associated with intestinal mucositis and suppressed hypoproliferation and apoptosis of intestinal crypt cells. These results indicate that SDACNF and chitosan are useful agents for preventing mucositis induced by anti-cancer drugs.

Protein/CaCO₃/Chitin Nanofiber Complex Prepared from Crab Shells by Simple Mechanical Treatment and Its Effect on Plant Growth

A protein/CaCO₃/chitin nanofiber complex was prepared from crab shells by a simple mechanical treatment with a high-pressure water-jet (HPWJ) system. The preparation process did not involve chemical treatments, such as removal of protein and calcium carbonate with sodium hydroxide and hydrochloric acid, respectively. Thus, it was economically and environmentally friendly. The nanofibers obtained had uniform width and dispersed homogeneously in water. Nanofibers were characterized in morphology, transparency, and viscosity. Results indicated that the shell was mostly disintegrated into nanofibers at above five cycles of the HPWJ system. The chemical structure of the nanofiber was maintained even after extensive mechanical treatments. Subsequently, the nanofiber complex was found to improve the growth of tomatoes in a hydroponics system, suggesting the mechanical treatments efficiently released minerals into the system. The homogeneous dispersion of the nanofiber complex enabled easier application as a fertilizer compared to the crab shell flakes.

Biomaterials based on freeze dried surface-deacetylated chitin nanofibers reinforced with sulfobutyl ether β-cyclodextrin gel in wound dressing applications

A freeze-dried gel composed of surface-deacetylated chitin nanofibers (SDACNFs), reinforced with an anionic cyclodextrin, sulfobutyl ether β-cyclodextrin (SBE-β-CD) was evaluated for treating wounds in a rat model, and the results were compared with a SDACNFs gel without SBE-β-CD. The incorporation of prednisolone (PD), a poorly water-soluble drug, in both types of gels and its release from the gels were also compared. In both cases, wound areas were decreased and their effect was higher than that of commercially available wound dressings. The rate of release of PD from the freeze-dried SDACNFs/SBE-β-CD was much faster than that form SDACNFs alone without SBE-β-CD, due to fact that the PD is more soluble in the amorphous SBE-β-CD complex compared to the other preparations. The findings indicate that the freeze-dried SDACNFs/SBE-β-CD gel would be beneficial as a new biomaterial for the treatment of wounds and for preparing homogeneous high-content gels that contain poorly water-soluble drugs.

Fabrication, Characterization, and Evaluation of Bionanocomposites Based on Natural Polymers and Antibiotics for Wound Healing Applications

The aim of our research activity was to obtain a biocompatible nanostructured composite based on naturally derived biopolymers (chitin and sodium alginate) loaded with commercial antibiotics (either Cefuroxime or Cefepime) with dual functions, namely promoting wound healing and assuring the local delivery of the loaded antibiotic. Compositional, structural, and morphological evaluations were performed by using the thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and fourier transform infrared spectroscopy (FTIR) analytical techniques. In order to quantitatively and qualitatively evaluate the biocompatibility of the obtained composites, we performed the tetrazolium-salt (MTT) and agar diffusion in vitro assays on the L929 cell line. The evaluation of antimicrobial potential was evaluated by the viable cell count assay on strains belonging to two clinically relevant bacterial species (i.e., Escherichia coli and Staphylococcus aureus).

Chitin nanofibrils suppress skin inflammation in atopic dermatitis-like skin lesions in NC/Nga mice

We evaluated the effect of chitin nanofibril (CNF) application via skin swabs on an experimental atopic dermatitis (AD) model. AD scores were lower, and hypertrophy and hyperkeratosis of the epidermis were suppressed after CNF treatment. Furthermore, inflammatory cell infiltration in both the epidermis and dermis was inhibited. CNFs also attenuated histological scores. The suppressive effects of CNFs were equal to those of corticosteroid application; however, chitin did not show these effects. CNF application might have anti-infllammatory effects via suppression of the activation of nuclear factor-kappa B, cyclooxygenase-2, and inducible nitric oxide synthase. In an early-stage model of experimental AD, CNFs suppressed AD progression to the same extent as corticosteroids. They also suppressed skin inflammation and IgE serum levels. Our findings indicate that CNF application could aid in the prevention or treatment of AD skin lesions.

Surface-Deacetylated Chitin Nano-Fiber/Hyaluronic Acid Composites as Potential Antioxidative Compounds for Use in Extended-Release Matrix Tablets

In this study, we examined a possible use of a surface-deacetylated chitin nano-fiber (SDCH-NF) and hyaluronic acid (HA) interpolymer complex (IPC) tablet as a potential antioxidative compound in extended-release matrix tablets. The antioxidant properties of untreated chitin (UCH), SDCH-NF, and HA were examined using N-centered radicals derived from 1,1'-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). SDCH-NF and HA had acceptable scavenging abilities and were relatively efficient radical scavengers, but UCH was much less effective. The results suggest that SDCH-NF and HA could serve as scavengers of compounds related to the development of oxidative stress. An SDCH-NF/HA IPC tablet was prepared and evaluated as an extended-release tablet matrix using famotidine (FMT) as a model drug. The release of FMT from the IPC tablet (DCF-NF:HA=1:1) was slower than that from a SDCH-NF only tablet. Turbidity measurements and X-ray diffraction (XRD) data also indicated that the optimum complexation ratio for IPC between SDCH-NF/HA is 1/1, resulting in a good relationship between turbidity or XRD of the complex and the release ratio of FMT. These results suggest that an SDCH-NF/HA tablet has the potential for use in an extended-release IPC tablet with a high antioxidant activity.

Effects of Oral Administration of Chitin Nanofiber on Plasma Metabolites and Gut Microorganisms

The aim of this study was to examine the effects of oral administration of chitin nanofibers (CNFs) and surface-deacetylated (SDA) CNFs on plasma metabolites using metabolome analysis. Furthermore, we determined the changes in gut microbiota and fecal organic acid concentrations following oral administrations of CNFs and SDACNFs. Healthy female mice (six-week-old) were fed a normal diet and administered tap water with 0.1% (v/v) CNFs or SDACNFs for 28 days. Oral administration of CNFs increased plasma levels of adenosine triphosphate (ATP), adenosine diphosphate (ADP), and serotonin (5-hydroxytryptamine, 5-HT). Oral administration of SDACNFs affected the metabolisms of acyl-carnitines and fatty acids. The fecal organic level analysis indicated that oral administration of CNFs stimulated and activated the functions of microbiota. These results indicate that oral administration of CNFs increases plasma levels of ATP and 5-HT via activation of gut microbiota.

Chitin, chitosan, and its derivatives for wound healing: old and new materials

Chitin (β-(1-4)-poly-N-acetyl-d-glucosamine) is widely distributed in nature and is the second most abundant polysaccharide after cellulose. It is often converted to its more deacetylated derivative, chitosan. Previously, many reports have indicated the accelerating effects of chitin, chitosan, and its derivatives on wound healing. More recently, chemically modified or nano-fibrous chitin and chitosan have been developed, and their effects on wound healing have been evaluated. In this review, the studies on the wound-healing effects of chitin, chitosan, and its derivatives are summarized. Moreover, the development of adhesive-based chitin and chitosan are also described. The evidence indicates that chitin, chitosan, and its derivatives are beneficial for the wound healing process. More recently, it is also indicate that some nano-based materials from chitin and chitosan are beneficial than chitin and chitosan for wound healing. Clinical applications of nano-based chitin and chitosan are also expected.

Preparation of a protein–chitin nanofiber complex from crab shells and its application as a reinforcement filler or substrate for biomineralization

A protein–chitin nanofiber complex was successfully prepared from crab shells by a mechanical treatment after the removal of CaCO₃.