Physicochemical and structural properties of pregelatinized starch prepared by improved extrusion cooking technology

Insights into the improved cold-water solubility and digestibility of alkaline-alcohol modified cassava starch: A discussion from the perspective of fine structure

Multi-objective optimization of starch for higher solubility and lower glycemic index is a challenge. In this study, we investigated the molecular structure evolution of cold water-soluble starch (CWS) and its correlation mechanism with solubility and digestibility by alkali-alcohol treatment of cassava starch. As NaOH concentration increased, the average molecular size of CWS gradually decreased, and the medium-long amylose (AM) chains (X ~ 1000-10,000) decreased sharply. The breakage of long starch chains could reveal more hydroxyl groups, increasing the opportunity to form hydrogen bonds with water molecules and thus increasing solubility up to 77.19 %. The ordered structure of starch was gradually destroyed, further reducing the gelatinization enthalpy and thus promoted starch swelling and gelatinization at lower temperatures. Compared to pregelatinized starch, the in vitro digestion fit showed that the estimated glycemic index of CWS was lower by about 10 %. The above multi-scale results could be found that the CWS still retained higher content of medium-long AM chains, which promoted stable and ordered structure of the starch chains, effectively impeding the penetration of digestive enzymes, whereas the relatively intact granule structure could inhibit the diffusion of digestive enzymes. This study could hold future potential for application in the field of starch-based instant convenience foods.

Effects of extrusion temperature on structure and physicochemical properties of proso millet starch

Due to its thermal stability, and high viscosity, proso millet starch has limited practical applications. Extrusion can alter the functional properties of starch by pre-gelatinization, but the specific effects of extrusion temperature on starch behavior are not clear. In this study, proso millet starch was modified using extrusion at varying temperatures (70 °C, 90 °C, 110 °C), and its structure as well as physicochemical properties were evaluated. As the extrusion temperature increased, the starch granules were gelatinized, and the particle size increased significantly. The relative crystallinity of extruded starch decreased and the short-range order was enhanced notably, but the starch still exhibited an A-type structure. Starch chains degraded, migrated, and aggregated, showing an increase in the double helix content, but there was no difference in the single helix structure with temperature. With the increase of extrusion temperature, the amorphous layer of extruded starch thickened. Moreover, the peak viscosity, breakdown viscosity and setback viscosity initially increased and then decreased, the peak temperature and enthalpy change increased. The water absorption index, water solubility and swelling power significantly decreased with increasing temperatures. The freeze-thaw stability and transparency of extruded starch decreased, and showed a downward trend with prolonged time. The above results indicate that extrusion treatment effectively modifies the thermal stability and viscosity of proso millet starch, laying a foundation for applying it different industrial applications.

Heat-stable single-helical structures formed during the extrusion process play a key role in the cooking and texture qualities of rice noodles

Extrusion is a critical process in rice noodle production. However, the underlying mechanism by which it influences noodle quality remains inadequately understood. In this study, rice noodles were processed at extrusion temperatures ranging from 100 °C to 140 °C and characterized in terms of molecular structure, short- and long-range order, microstructure, cooking loss, and texture properties. The results indicated that extrusion at 120 °C promoted the formation of heat-stable amylose single-helical structures, including VII-type crystals. These stable amylose structures reduced their interference with the rearrangement of amylopectin, facilitating the formation of amylopectin double-helical structures and A-type crystals during the subsequent retrogradation process. The highly ordered helical structures and crystals were further organized into larger, denser domains, characterized by a gyration radius of 21.45 nm, a fractal dimension of 2.54, and a correlation length of 6.64 nm. These dense domains were uniformly distributed throughout the gel matrix of rice noodles, acting as cross-links within the gel network and thereby enhancing its mechanical strength. The enhancement in the gel's mechanical strength ultimately contributed to improved eating quality of rice noodles extruded at 120 °C compared to those extruded at 100 °C. This improvement was evidenced by a 53.4 % reduction in cooking loss, a 52.5 % decrease in adhesiveness, and significant increases in hardness (51.4 %), springiness (21.3 %), and chewiness (52.3 %). This study underscores the critical role of heat-stable amylose single-helical structures, particularly VII-type crystals, formed during the extrusion process in determining the cooking and texture qualities of rice noodles.

Insight into the interaction between starch and guest molecules for quality improvement of buckwheat wantuo through extrusion and blending

As a "clean labelled" food additive, extruded Tartary buckwheat flour (ETBF) was used to enhance the eating quality of functional coarse cereal foods. However, it is unclear whether it can enhance the quality of the traditional Chinese starchy food buckwheat wantuo (BWT). This study investigated how blending ETBF at different ratios (5 %, 10 %, and 15 %) affected the physicochemical properties of Tartary buckwheat flour (TBF) and BWT quality. The results revealed degradation of amylopectin and amylose during extrusion, along with changes in colour, hydration, and pasting properties of TBF due to blending. Blending also improved the total polyphenol content (TPC), antioxidant activity, texture, and anti-digestibility of BWT. The evolution of starch conformation and polyphenol state influenced texture and digestion, with the local concentration ratio between the host and the guest being a key factor. Sensory evaluation combined with digestion data indicated that a blending ratio of 10 % was optimal. These findings provide valuable insights into developing functional coarse cereal foods.

Understanding key component factors influencing the processing performance of extruded foxtail millet

This study elucidated the relationship among physicochemical properties of native/extruded foxtail millet, rheological properties, and processing performance of dough made from extruded millet through an in-depth exploration utilizing Pearson correlation, principal component, and K-means cluster analysis. Results showed that crude protein (8.21 %-9.27 %) and lipid content (1.47 %-5.19 %), peak time (4.6-5.3 min), and starch short-range order (R995/1016) of native millet (1.564-1.901) were pivotal in shaping the molecular dynamics, degradation and reorganization processes during extrusion. Notably, heightened levels of crude protein and lipid content, alongside increased short-range order of starch in native millet, hindered the disorder and reorganization of starch, resulting in decreased expansion ratio, degree of gelatinization, water solubility index, and R995/1016 value. These factors significantly impacted dough properties, leading to increased hardness and elasticity while concurrently reducing viscosity. K-means cluster analysis classified 11 foxtail millet varieties into three groups: those exhibiting high hardness (9.26 % protein, 3.77 % lipid and R995/1016 = 1.87) (1), exceptional springiness (8.58 % protein, 1.77 % lipid and R995/1016 = 1.75) (2), and advantageous viscosity (8.46 % protein, 1.82 % lipid and R995/1016 = 1.71) (3).

Effects of high temperature, high pressure, and high shear during extrusion on maize starch-fish protein extrudates: Based on physical properties and multiscale structure

This study explored the effects of high temperature, high pressure and high shear during extrusion on maize starch-fish protein extrudates and elucidated the interaction between starch and protein. The results showed that high temperatures promoted an increase in the β-sheets content of the extrudates and contributed to the fusion of starch and protein. High pressure disrupted the starch's agglomerate structure and protein gel network. With the increase of extrusion strength, the pasting properties of the extrudates were reduced, and the ΔH decreased from 5.87 J/g to 2.70 J/g. Moreover, high shear reduced the short-range orderliness of starch through shear-generated water migration, while promoting the mixing of starch and protein. Interestingly, the synergistic effect of high temperature, high pressure and high shear promoted new hydrogen bonding and hydrophobic interactions between starch and protein. This study provides a scientific basis for considering the unique properties and structure of maize starch-fish protein extrudates.

High moisture extrusion induced interaction of Tartary buckwheat protein and starch mitigating the in vitro starch digestion

This study investigated the effects of adding 4-20 % Tartary buckwheat protein (TBP, with a purity of 93.35 %) on the structural, thermal, and digestive properties of Tartary buckwheat starch (TBS) by high moisture (60 %) extrusion. The added TBP embedded and enwrapped the starch matrix, which formed protein-starch complexes. After adding 4 %-20 % TBP, the shear degradation of AP decreased. Conversely, the shear degradation of AM chains increased. The addition of TBP promoted the retrogradation of starch in extrudates, enhancing their short- and long-range ordered structures. Compared with extruded TBS, extrudates contained TBP showed a reduction of gelatinization enthalpy, a high content of resistant starch, and a lower starch digestibility. These findings provided an insight into the protein-starch interactions under high moisture extrusion, which would promote the advancement of starch-based foods with high TBP content.

Innovative Hemp Shive-Based Bio-Composites, Part II: The Effect of the Phase Change Material (PCM) Additive on Characteristics of Modified Potato Starch Binders

This study investigates the effect of phase change materials (PCM) on the properties of modified potato starch binders and hemp shive-based bio-composites, emphasizing their potential for sustainable construction applications. PCM-modified binders have shown reduced viscosity during gelatinization, enhancing their workability and uniformity during processing. A microstructural analysis reveals that PCM addition results in a denser and more cohesive binder network, leading to improved adhesion and reduced porosity. A thermal analysis demonstrates a shift to higher decomposition temperatures and a linear increase in specific heat capacity within the PCM phase-change range (20-30 °C), significantly enhancing the thermal storage capacity of the bio-composites. PCM addition improves compressive strength by up to twice, with optimal performance achieved at 8% PCM additive content. The prolonged cooling time, up to three times longer in bio-composites with PCM additive, highlights their effectiveness in thermal regulation. Additionally, bio-composites with a PCM additive exhibits increased bulk density and reduced water swelling, improving dimensional stability. These findings underline the dual benefits of enhanced thermal and mechanical performance in bio-composites with a PCM additive, making them a viable alternative to conventional building materials.

Different effects of polyphenols on hydration, pasting and rheological properties of rice starch under extrusion condition: From the alterations in starch structure

Effects of polyphenols including caffeic acid (CA), ferulic acid (FA), epigallocatechin gallate (EG), tannic acid (TA) and resveratrol (R) on physicochemical and structural properties of rice starch (RS) under the extrusion condition were investigated. Extrusion altered the hydration, pasting and rheological properties of rice starch. Adding FA exhibited the best improvement effect on hydration properties of extruded rice starch (E-RS). All polyphenols possessed different inhibitory effects on short-term retrogradation of E-RS following the order of TA > EG > CA > FA > R. The FA and CA enhanced the viscoelasticity of E-RS, whereas the other polyphenols had opposite influences. Polyphenols mainly interacted with starch via hydrogen bonds, which transformed the crystalline structure to V-type and increased the molecular weight of E-RS. Above different effects were due to polyphenols exhibited varied microstructure and phenolic hydroxyl group content. These findings provided valuable information for preparing extruded starchy foods rich in polyphenols.

Enhancing enzymatic resistance of pea type 3 resistant starch through pressure heating and annealing

Type III resistant starch (RS3) is an important functional food ingredient. In this study, RS3 was prepared by retrogradation of pea starch after acid hydrolysis and pullulanase debranching. Heat-moisture treatments, including annealing (90 °C, 40-70 % moisture content) and pressure heating (121 °C, 10-40 % moisture content), were employed to further enhance the RS content of pea RS3. The relationship between the structural changes and digestibility of pea RS3 was investigated. The results showed significant increases in relative crystallinity, particle size, gelatinization temperature, and RS content, while swelling power, pasting viscosity, and rapidly digestible starch content were markedly decreased after heat-moisture treatment. A strong positive correlation (r = 0.94*) was observed between relative crystallinity and RS content. The highest RS content of 85.6 % was achieved after pressure heating at 20 % moisture content, which was notably higher than the 45.6 % RS content before heat-moisture treatment. This study highlights the beneficial effects of annealing and pressure heating in enhancing RS content in pea RS3, providing valuable insights for developing RS3 with high RS content after cooking.

Liquid nitrogen ball-milled mechanochemical modification of starches with typically selected A, B and C crystal types on multiscale structure and physicochemical properties

This study investigated the effect of liquid nitrogen ball-milled mechanochemical treatment on multiscale structure and physicochemical properties of starches with typically selected A (rice starch, ReS), B (potato starch, PtS) and C (pea starch, PeS) crystal types. The morphology of starch samples changed from integral granules to irregular fragments, and the interaction between the exposure OH bonds led to a serious agglomeration. As the treatment times extended, the crystalline structure of starch samples was gradually destroyed, and the excessive treatment approached amorphization. Moreover, the thermal stability of starch samples showed the downward tendency; and with amorphization increased, the swelling power (SP), solubility (S), water absorption capacity (WAC), oil absorption capacity (OAC) and hydrolysis rate of starch samples gradually increased. The obtained results provided a theoretical foundation for broadening the application range of ball-milled starches with different crystal types.

Study on Starch-Based Thickeners in Chyme for Dysphagia Use

A dysphagia diet is a special dietary programme. The development and design of foods for dysphagia should consider both swallowing safety and food nutritional quality. In this study, we investigated the rheological properties (viscosity, thixotropy, and viscoelasticity), textural properties, and swallowing behaviour of commercially available natural, pregelatinised, acetylated, and phosphorylated maize starch and tapioca starch. The results showed that all the samples belonged to food grade 3 in the framework of the International Dysphagia Dietary Standardization Initiative (IDDSI) and exhibited shear-thinning behaviour in favour of dysphagia patients, except for the sample containing pregelatinised starch, which was grade 2. Rheological tests showed that the samples had good structural recovery properties. At the same starch concentration, the elastic modulus of phosphorylated cassava starch FSMP was significantly greater than that of the starch solution, whereas that of acetylated starch was significantly less than that of the starch solution, and the combination of acetylated starch and protein led to a significant viscosity reduction phenomenon, resulting in FSMPs with good stability and fluidity; this may provide an opportunity for the incorporation of more high-energy substructures. The textural results showed that all the samples possessed textural properties of low hardness, low adhesion, and high cohesion, all of which could be used as food for dysphagia patients. This study may provide a theoretical basis for the creation and design of novel nutritional foods for dysphagia.

Starch modification by low-dose electron beam irradiation: A comprehensive study between buckwheat starch, potato starch and pea starch

Electron Beam Irradiation (EBI) is an emerging technique for food decontamination and starch modification, but a comprehensive evaluation at safe doses (<10 kGy) for different starch sources is lacking. This study investigated the effects of low-dose EBI (2-8 kGy) on the physicochemical properties of buckwheat starch (BS), potato starch (POS), and pea starch (PS), each with different crystalline types (A-, B-, and C-type, respectively). EBI significantly reduced moisture and amylose content, decreased pasting viscosity, and retarded retrogradation dose-dependently for all starches. It also altered relative crystallinity (RC), thermal properties, rheological properties, and in vitro digestion, with effects varying by starch source. EBI-treated BS and POS showed decreased RC, gelatinization temperature and enthalpy, and increased paste flowability, while EBI-treated PS exhibited the opposite trend. Digestibility of EBI-treated BS initially decreased then increased with dose, while POS digestibility increased, and PS digestibility remained unchanged. This study highlights the versatility of EBI in starch modification, emphasizing its potential in developing low-viscosity starchy foods.

Rheological behavior and release dynamics of pregelatinized pink potato starch modified by stearic acid

The effects of stearic acid (5 %, 10 %, and 15 % w/w) and pregelatinized pink potato starch (20, 25, and 30 min) on complex formation, physicochemical properties, rheology, and release characteristics were investigated. Moisture content decreased from 14.26 % in pregelatinized starch to 13.25 %, 12.85 %, and 11.45 % in complexes with 5 %, 10 %, and 15 % stearic acid, respectively. Water-holding capacity dropped from 268.68 % to 128.26 %, 95.05 %, and 50.63 %, with increasing stearic acid concentrations. Swelling and solubility power also decreased, with swelling power reducing from 5.57 % to 3.45 % and solubility from 12.75 % to 10.34 %. Micromeritic evaluations showed improved flowability in starch-stearic acid complexes. X-ray diffraction revealed a V-type crystalline complex with characteristic peaks at 7°, 21°, 22°, and 24°, and additional peaks at 7° and 41°. FTIR spectra indicated complex formation with bands around 2917 and 1700 cm-1. FESEM imaging showed intact granules with irregular shapes and protruding amylose fragments. Rheological assessments indicated reduced viscosity and altered viscoelastic properties in the complexes. In-vitro release studies demonstrated controlled drug release, suggesting potential applications for targeted pharmaceutical delivery. This study emphasizes the functional modifications induced by stearic acid in pregelatinized starch, enhancing material properties for industrial and biomedical applications.

Investigating the Impact of Moisture Levels on Structural Alterations and Physicochemical Properties of Cassava Flour through Extrusion: A Comprehensive Study

The extrusion process, a vital technique for starch modification, is notably influenced by the moisture content (MC). This study aimed to elucidate the effect of varying MC levels (18, 22, 26, and 30%) on the structural and physicochemical characteristics of cassava flour during extrusion. Extrusion resulted in the fraction of degree of polymerization 13‒24, degree of branching, and molecular weight increased with increasing MC, with values of above indexes being 32.29%, 1.05%, and 1.21 × 105 g/mol, respectively, at a MC of 18%. This suggested that the degradation of amylopectin and amylose. Additionally, there was an increase in rapidly digestible starch (RDS) and a decrease in slowly digestible starch (SDS) in the extrudates in comparison to the native cassava flour. The extrusion of cassava flour at 18% MC exhibited the highest levels of RDS and SDS, reaching 64.52% and 4.06%, respectively. These findings indicated that low moisture extrusion could be a more effective method for disrupting the structure of cassava starch and enhancing the digestibility of cassava flour, offering valuable insights for the optimized use of cassava extrudates in various applications.

Research Progress on the Physicochemical Properties of Starch-Based Foods by Extrusion Processing

Extrusion is a crucial food processing technique that involves mixing, heating, shearing, molding, and other operations to modify the structures and properties of food components. As the primary energy source material, the extrusion process induces significant physical and chemical changes in starch that impact the quality of final products. This review paper discusses novel technologies for starch extrusion and their influence on the physical and chemical properties of starch-based foods, such as gelatinization and retrogradation properties, structural characteristics, and digestion properties. Additionally, it examines the application of extrusion in starch processing and the interactions between starch and other food components during extrusion. This information sheds light on the structural and property alterations that occur during the extrusion process to create high-quality starch-based foods.

A review of the effects of physical processing techniques on the characteristics of legume starches and their application in low-glycemic index foods

Physical processing techniques significantly influence the characteristics of legume starch, consequently affecting the potential applications of legume-based products. This review comprehensively examines the impact of various physical processing techniques on legume starch properties, including structure, granule morphology, gelatinization, pasting properties, solubility, and in vitro digestibility. Furthermore, it evaluates the implications of these processing methods for utilizing legumes in developing low-glycemic index (GI) foods. Notably, certain physical processing methods, such as heat-moisture treatment, ultrahigh-pressure processing, dry heat treatment, and gamma irradiation, under specific conditions, enhance the resistant starch or slowly digestible starch fractions in legume starches. This enhancement is particularly advantageous for producing low-GI foods. Conversely, techniques like annealing, extrusion, ultrasound, and germination increase starch digestibility, which is less favorable for low-GI food applications. This review also provides an up-to-date overview of the use of diverse preprocessed legume products in low-GI food production. The novelty of this review lies in its detailed comparative analysis of physical processing methods and their specific effects on legume starch digestibility, which has not been extensively covered in existing literature. The comprehensive insights presented herein will benefit the legume industry by informing effective strategies for converting legume starch into valuable low-GI products.

The Effects of Adding Extruded Highland Barley Flour on the Thermomechanical Properties of Wheat Flour Dough and the Overall Quality of Fresh Wet Noodles

This study examined how adding extruded highland barley flour (EHBF) affects the thermomechanical properties of wheat flour dough and the overall quality of fresh wet noodles. EHBF increased the gel strength and pasting temperature of wheat flour compared to regular highland barley flour. Moreover, higher EHBF levels reduced dough development time and stability time. EHBF improved the color and springiness of fresh wet noodles and decreased their cooking time and light transmittance relative to the color and springiness of the noodles in the control group. Notably, noodles with 20% EHBF showed a compact microstructure and received the highest sensory evaluation score. Adding EHBF lowered the estimated glycemic index of fresh wet noodles by reducing rapidly digestible starch and increasing slowly digestible starch and resistant starch contents. Thus, EHBF is a promising functional ingredient for enhancing the quality of fresh wet noodles.

The Influence of Processing Using Conventional and Hybrid Methods on the Composition, Polysaccharide Profiles and Selected Properties of Wheat Flour Enriched with Baking Enzymes

In this study, a developed wheat flour blend (F), consisting of a high content of non-starch polysaccharides, was fortified with cellulase (C) and a cellulase-xylanase complex (CX) and then processed via conventional and hybrid treatment methods. Dry heating (T), hydrothermal treatment (H) and extrusion processing (E) were applied without or with enzyme addition as hybrid treatments. Proximate composition and polysaccharide profiles selected techno-functional and structural properties of modified wheat flours, were analyzed. Conventional and hybrid treatments induced changes in polysaccharide fraction compositions (especially the arabinoxylans) and the rheology of modified flour. Dry heating caused an inconsiderable effect on flour composition but reduced its baking value, mainly by reducing the elasticity of the dough and worsening the strain hardening index, from 49.27% (F) to 44.83% (TF) and from 1.66 (F) to 1.48 (TF), respectively. The enzymes added improved the rheological properties and baking strength, enhancing the quality of gluten proteins. Hydrothermal enzyme-assisted treatment increased flour viscosity by 14-26% and improved the dough stability by 12-21%; however, the use of steam negatively affected the protein structure, weakening dough stretchiness and elasticity. Extrusion, especially enzyme-assisted, significantly increased the hydration properties by 55-67% but lowered dough stability, fat content and initial gelatinization temperature due to the changes in the starch, mostly induced by the hybrid enzymatic-extrusion treatment. The structure of extruded flours was different from that obtained for other treatments where the peak intensity at 20° was the highest, suggesting the presence of amorphous phases of amylose and lipids. The results can be helpful in the selection of processing conditions so as to obtain flour products with specific techno-functional properties.

Recent advances in the impact of gelatinization degree on starch: Structure, properties and applications

During home cooking or industrial food processing operations, starch granules usually undergo a process known as gelatinization. The starch gelatinization degree (DG) influences the structural organization and properties of starch, which in turn alters the physicochemical, organoleptic, and gastrointestinal properties of starchy foods. This review summarizes methods for measuring DG, as well as the impact of DG on the starch structure, properties, and applications. Enzymatic digestion, iodine colorimetry, and differential scanning calorimetry are the most common methods for evaluating the DG. As the DG increases, the structural organization of the molecules within starch granules is progressively disrupted, the particle size of the granules is altered due to swelling and then disruption, the crystallinity is decreased, the molecular weight is reduced, and the starch-lipid complexes are formed. The impact of DG on the starch structure and properties depends on the processing method, operating conditions, and starch source. The starch DG affects the quality of many foods, including baked goods, fried foods, alcoholic beverages, emulsified foods, and edible inks. Thus, a better understanding of the changes in starch structure and function caused by gelatinization could facilitate the development of foods with novel or improved properties.

Effect of ultrafine grinding on the structure and physical properties of pregelatinized rice starch

This study used a combination method of ultrafine grinding and pregelatinization to modify rice starch (RS) to delay its retrogradation and provide a rationale for prolonging rice product shelf life. The structure and physicochemical properties of the pregelatinized ultrafine grinding rice starch (PURS) were compared with those of RS, ultrafine grinding rice starch (URS), and pregelatinized rice starch (PRS). The microstructure, molecular weight, branched starch length distribution, short-range order, crystal structure, and physical properties of RS, URS, PRS, and PURS were analyzed, respectively. Results showed that RS, URS, PRS, and PURS granules exhibited similar spherical or polygonal shapes, and the content of amylose and short-branched starch in PURS increased compared with RS, URS, and PRS. Furthermore, the cross-polarization of PRS and PURS disappeared. Long-chain amylopectin and average molecular weight of PURS decreased significantly after ultrafine grinding. Our study suggested reduced breakdown value and setback value and improved gel stability, and PURS was beneficial for delaying retrogradation compared to RS, URS, and PRS. The ultrafine grinding method improved the water swelling capacity (WSC), solubility, pasting properties, and gelation properties of PRS. The hardness of PURS was reduced by ultrafine grinding. These suggest that the combination of ultrafine grinding and pregelatinization could improve the properties of RS. Pearson's correlation analysis showed that the structure of PURS significantly influenced the physicochemical properties. The present study was helpful in better understanding the importance of ultrafine grinding in improving the anti-retrogradation of PURS and provided new insights into extending the shelf life of rice products by ultrafine grinding and pregelatinization.

Insight into the mechanism of digestibility inhibition by interaction between corn starch with different gelatinization degree and water extractable arabinoxylan

On the basis of revealing the interaction mechanism between corn starch (CS) and water-extractable arabinoxylan (WEAX) with high/low molecular weight (H-WEAX, L-WEAX), the degree of gelatinization (DG) on structural behaviors and in vitro digestibility of CS-WEAX complexes (CS/H, CS/L) was evaluated. With the increased DG from 50 % to 95 %, the water adsorption capacity of CS/L was increased 64 %, 58 %, 47 %, which were higher than that of CS/H (39 %, 54 %, 33 %). The gelatinization of starch was inhibited by WEAX, resulting in the enhancement of crystallinity, short-range ordered structure and molecular size of CS-WEAX complexes. Stronger interaction was detected in CS/L than with CS/H as proved by the increased hydrogen bonds and electrostatic force. Complexes exhibited higher resistant starch content (RS) at diverse DG, especially for CS/L. Notability, RS content of samples with 50 % DG were increased from 27.72 % to 32.89 % (CS/H), 36.96 % (CS/L). Except for the reduction of gelatinization degree by adding WEAX, the other possible mechanisms of retarding digestibility were explained as the small steric hindrance of L-WEAX promoted encapsulation of starch granules, limiting enzyme accessibility. Additionally, the fragmentation of CS granules with high DG promoted the movement of H-WEAX, reducing the difference in digestibility compared to CS/L.

Effect of superheated steam treatment on enzyme inactivation, morphostructural, physicochemical and digestion properties of sand rice (Agriophyllum squarrosum) flour

The lipase (LA) and peroxidase (POD) activities, as well as morphological structure, physicochemical and digestion properties of sand rice flour (SRF) treated with superheated steam (SS), were investigated. SS treatment at 165 °C completely deactivated LA and resulted in a 98% deactivation of POD activities in SRF. This treatment also intensified gelatinization, induced noticeable color alterations, and decreased pasting viscosities. Furthermore, there was a moderate reduction in crystal structure, lamellar structure, and short-range ordered structure, with a pronounced reduction at temperatures exceeding 170 °C. These alterations significantly impacted SRF digestibility, leading to increased levels of rapidly digestible starch (RDS) and resistant starch (RS), with the highest RS content achieved at 165 °C. The effectiveness of SS treatment depends on temperature, with 165 °C being able to stabilize SRF with moderate changes in color and structure. These findings will provide a scientific foundation for SS applicated in SRF stabilization and modification.

A novel chitosan and polyferric sulfate composite coagulant for biogas slurry pretreatment by simultaneous flocculation and floatation: Performance and underlying mechanisms

Biogas slurry from anaerobic digestion is rich in nutrients but has not been fully utilized due to a high content of suspended solids (SS) causing clogging during agricultural irrigation. This study aimed to evaluate the performance of a novel chitosan and polyferric sulfate (CTS-PFS) composite coagulant for simultaneous flocculation and floatation to enhance SS removal while preserving nutrients in biogas slurry. Orthogonal method was used for experimental design to determine the optimal synthesis and operational conditions of CTS-PFS. Results show that CTS-PFS outperformed individual CTS and PFS coagulant in terms of SS removal and nutrient (nitrogen, phosphorus, and potassium) preservation. Compared to individual CTS and PFS coagulation, the combination of CTS and PFS at the mass ratio of 1:6 showed significantly higher performance by 41.5 % increase in SS removal and 5.2 % reduction in nutrient loss. The improved performance of CTS-PFS was attributed to its formation of polynuclear hydroxyl complexes with ferric oxide groups (e.g. Fe-OH, Fe-O-Fe, Fe-OH-Fe and COO-Fe) to strengthen charge neutralization and adsorption bridging. Data from this study further confirm that CTS-PFS enhanced the removal of small suspended particles and dissolved organic matter in the molecular weight range of 0.4-2.0 kDa and preserved ammonia and potassium better in biogas slurry. Bubbles were generated as hydrogen ions from coagulant hydrolysis interacted with bicarbonate and carbonate in biogas slurry for removing the produced flocs by floatation. Floc flotation was more effective in CTS-PFS coagulation due to the significant production of uniform bubbles, evidenced by the reduction in the viscosity of biogas slurry.

Insight to starch retrogradation through fine structure models: A review

The retrogradation of starch is crucial for the texture and nutritional value of starchy foods products. There is mounting evidence highlighting the significant impact of starch's fine structures on starch retrogradation. Because of the complexity of starch fine structure, it is a formidable challenge to study the structure-property relationship of starch retrogradation. Several models have been proposed over the years to facilitate understanding of starch structure. In this review, from the perspective of starch models, the intricate structure-property relationship is sorted into the correlation between different types of structural parameters and starch retrogradation performance. Amylopectin B chains with DP 24-36 and DP ≥36 exhibit a higher tendency to form ordered crystalline structures, which promotes starch retrogradation. The chains with DP 6-12 mainly inhibit starch retrogradation. Based on the building block backbone model, a longer inter-block chain length (IB-CL) enhances the realignment and reordering of starch. The mathematical parameterization model reveals a positive correlation between amylopectin medium chains, amylose short chains, and amylose long chains with starch retrogradation. The review is structured according to starch models; this contributes to a clear and comprehensive elucidation of the structure-property relationship, thereby providing valuable references for the selection and utilization of starch.

Effects of different extrusion temperatures on the physicochemical properties, edible quality and digestive attributes of multigrain reconstituted rice

Multigrain reconstituted rice, as a nutritious and convenient staple, holds considerable promise for the food industry. Furthermore, highland barley, corn, and other coarse cereals are distinguished by their low glycemic index (GI), rendering them effective in mitigating postprandial blood glucose levels, thereby underscoring their beneficial physiological impact. This study investigated the impact of extrusion temperature on the physicochemical properties, edible quality, and digestibility of multigrain reconstituted rice. The morphology revealed that starch particles that are not fully gelatinized in multigrain reconstituted rice are observed at an extrusion temperature range of 60 °C-90 °C. As the extrusion temperature increased, the degree of gelatinization (DG) increased, while the contents of water, protein, total starch, and amylopectin decreased substantially. Concurrently, the relative crystallinity, orderliness of starch, and heat absorption enthalpy (ΔH) decreased significantly, and water absorption (WAI) and water solubility (WSI) increased markedly. Regarding edible quality, sensory evaluation displayed an initial increase followed by a decrease. In terms of digestibility, the estimated glycemic index (eGI) increased from 61.10 to 70.81, and the GI increased from 60.41 to 75.33. In addition, the DG was significantly correlated with both eGI (r = 0.886**) and GI (r = 0.947**). The results indicated that the ideal extrusion temperature for multigrain reconstituted rice was 90 °C. The findings underscored the pivotal role of optimal extrusion temperatures in the production of multigrain reconstituted rice, which features low GI and high nutritional quality.

Micronization induced gelatinization of tapioca starch and its effects on starch physicochemical and structural properties

The vibrating superfine mill (VSM) is a machine that belongs to the micronization technique. In this study, VSM was employed to produce micronized tapioca starch by varying micronization times (15, 30, 45, and 60 min). The structural and physicochemical properties of the micronized starch were then examined. Scanning electron microscopy studies revealed that micronized starch was partially gelatinized, and the granule size dramatically increased when micronization time increased. X-ray diffraction patterns showed that the relative crystallinity was decreased from 24.67% (native) to 4.13% after micronization treatment for 15 min and slightly decreased after that. The solubility of micronized starch significantly increased as the micronization time increased, which was associated with the destruction of the starch crystalline structure. Differential scanning calorimetry investigations confirmed that micronized starch was "partly gelatinized," and the degree of gelatinization increased to 81.27% when the micronization time was 60 min. The weight-average molar mass was reduced by 15.0% (15 min), 30.9% (30 min), 55.7% (45 min), and 70.5% (60 min), respectively, indicating that the molecular structure was seriously degraded. The results demonstrated that the physicochemical changes of micronized starch granules were related to the destruction of the starch structure. These observations would provide details on micronized starch and its potential applications. PRACTICAL APPLICATION: These observations would provide details on micronized starch and its potential applications. Moreover, we believe that when the structures of starches were known, it is probable that the effect of VSM on the structural and physicochemical properties change of other starches might be predicted by adjusting the processing time.

Understanding the mechanism for sodium tripolyphosphate in improving the physicochemical properties of low-moisture extrusion textured protein from rapeseed protein and soybean protein blends

Our previous experiments found that rapeseed protein (RP) has applicability in low-moisture textured proteins. The amount of RP added is limited to <20 %, but the addition of 20 % RP still brings some negative effects. Therefore, in order to improve the quality of 20%RP textured protein, this experiment added different proportions of sodium tripolyphosphate (STPP) to improve the quality of the product, and studied the physical-chemical properties and molecular structure changes of the product to explore the possible modification mechanism. The STPP not only improved the expansion characteristics of extrudates, but also increased the brightness of the extrudates, the rehydration rate. In addition, STPP increased the specific mechanical energy during extrusion, decreased the material mass flow rate. Furthermore, STPP decreased the starch digestibility, increased the content of slow-digesting starch and resistant starch. STPP increased the degree of denaturation of extrudate proteins, the proportion of β-sheets in the secondary structure of proteins, as well as the intermolecular hydrogen bonding interactions. The gelatinization degradation degree of starch molecules also decreased with the addition of STPP. STPP also increased the protein-starch interactions and enhanced the thermal stability of the extrudate. All these indicate that STPP can improve the physical-chemical properties of extrudate.

Synergistic modification of hot-melt extrusion and nobiletin on the multi-scale structures, interactions, thermal properties, and in vitro digestibility of rice starch

Background

Rice starch has high digestibility due to its large carbohydrate content. Synergistic modification of hot-melt extrusion (HME) and additives such as flavonoids, hydrocolloids, proteins, lipids, and other additives has the tendency to retard the rate of starch hydrolysis. Hence, the current investigation aimed to study the combined effect of the HME-assisted addition of nobiletin (NOB, 0, 2, 4, and 6%) on the multi-scale structures, interactions, thermal, and digestibility characteristics of rice starch.

Methods

The study employed density functional theory calculations and an infrared second derivative of an Fourier-transform infrared (FTIR) spectrometer to analyze the interactions between NOB and starch. The physicochemical properties of the starch extrudates were characterized by FTIR, 13C nuclear magnetic resonance, X-ray diffraction, and differential scanning calorimetry, while the digestibility was evaluated using an in vitro digestion model.

Results

HME was found to disrupt the crystalline structure, helix structure, short-ordered structure, and thermal properties of starch. The interaction between NOB and starch involved hydrophobic interactions and hydrogen bonds, effectively preventing the molecular chains of starch from interacting with each other and disrupting their double helix structure. The addition of NOB led to the formation of a highly single-helical V-type crystalline structure, along with the formation of ordered structural domains. Consequently, the combined treatment significantly enhanced the ordered structure and thermal stability of starch, thus effectively leading to an increase in resistant starch and slowly digestion starch.

Discussion

The study underscores that synergistic modification of HME and NOB holds promise for enhancing both the nutritional value and functional properties of rice starch. These findings offer valuable insights for developing high-quality rice starch products with broader applications.

Structural modification of starch and protein: From the perspective of gelatinization degree of oat flour

To clarify the relationship between gelatinization degree and structure characteristics, oat kernels were roasted to different gelatinization degree of 15 %-90 % based on tempering water content of 22.5 %-35 %, and the structure characteristics of starch and protein were evaluated. The results showed that the increased gelatinization degree dependent on tempering water content promoted protein aggregation on the surface of starch particles, forming larger aggregates with molecular weight >100 kDa. Oat kernels presented a dense starch gel network structure induced by gelatinized starch. Partial gelatinization of starch led to a decrease in pasting viscosities (setback viscosity, 3.91 Pa·s-1.59 Pa·s) and enthalpy (5.12 J/g-0.11 J/g). With the increase of gelatinization degree, the starch crystal structure conversed from A + V type to V type, accompanied by the formation of starch-lipid complexes and a decrease of relative crystallinity (22.28 %-8.72 %). Moreover, 50 % gelatinized oat flour possessed the highest β-sheet structure (38.04 %), but a decrease in surface hydrophobicity and an increase in endogenous fluorescence intensity were found in oat flour of gelatinization degree >50 %. This study provided a theoretical reference for the application of oat flour with different gelatinization degrees to match suitable products.

Effects of Extrusion Technology on Physicochemical Properties and Microstructure of Rice Starch Added with Soy Protein Isolate and Whey Protein Isolate

In order to improve the retrogradation of rice starch (RS) and the quality of rice products, soy protein isolate (SPI), whey protein isolate (WPI), and rice flour were mixed and further extruded into mixed flour. The physicochemical properties and morphology of starch of extruded rice flour (ERS) and starch of extruded mixtures of SPI, WPI, and rice flour (SPI-WPI-ERS) were analyzed. The distribution of amylopectin chain length, molecular weight, microstructure, crystallinity, short-range ordered structure, pasting properties, and thermodynamic properties of RS, ERS, and SPI-WPI-ERS were measured. The results showed that, compared with rice starch, the proportion of long-chain starch, total starch content, and molecular weight were decreased in ERS and SPI-WPI-ERS, but the proportion of short-chain and amylose content was increased. The short-range order structure was destroyed. The water absorption of ERS and SPI-WPI-ERS was much higher than rice starch at 55 °C, 65 °C, and 75 °C, but lower than that of rice starch at 95 °C. Therefore, the retrogradation characteristics of SPI-WPI-ERS were improved. The setback of rice starch products was reduced and the setback of SPI-WPI-ERS was lower than that of ERS. Overall, the retrogradation of rice starch was delayed by adding exogenous protein and extrusion technology, and the application range of rice flour in staple food products was broadened.

Functionality differences between esterified and pregelatinized esterified starches simultaneously prepared by octenyl succinic anhydride modification and its application in dough

Octenyl succinic anhydride (OSA)-modified starches have gained widespread interest, but the modification can produce two starches with different states ignored. Herein, the two types of starches, esterified starch (ES) and pregelatinized esterified starch (PES), prepared by OSA modification were separated, and their structural and functional characteristics were comprehensively explored. Results showed that compared with native starch (NS), ES and PES exhibited high water-holding capacity, solubility, and swelling power and significantly decreased pasting temperature and thermal stability. Dynamic rheological tests illustrated that OSA modification changed the rheological behavior of starches. Fourier transform infrared spectroscopy confirmed that PES with higher degree of substitution showed more obvious ester carbonyl and carboxylate groups than ES. Laser confocal micro-Raman spectroscopy revealed that the short-range molecular order of ES, especially PES, decreased after modification. X-ray diffraction indicated that OSA modification disrupted the crystalline structure of starch, and that more amylose-lipid complex was formed in PES. Scanning electron microscopy showed that OSA modification eroded starchs surface and reduced its smoothness, and significantly disrupted PES integrity. ES and PES could be developed as food additives for retrogradation inhibition of dough. These results provide new insights into OSA modification and expand its functional application in foods.

Enhancing Banana Flour Quality through Physical Modifications and Its Application in Gluten-Free Chips Product

The objective of this study was to analyze the effects of different single or dual physical treatments, including pre-gelatinization (PBF), annealing (ANN), PBF+ANN, and ANN+PBF, on banana flour's characteristics and its application in gluten-free chip production. The study involved determining the color, swelling capacity, solubility, oil absorption index, and pasting properties of both the native and modified banana flour samples. The results showed a significant change in color, particularly in the pre-gelatinized samples. There was a noticeable decrease in the values of the pasting parameters in the modified samples. PBF samples exhibited a remarkable reduction in the breakdown value compared to the native and ANN treated samples. Furthermore, PBF-treated banana flour displayed higher oil absorption and swelling power than the other samples, along with lower solubility in the PBF-treated sample. These characteristics appear to be responsible for enabling the pre-gelatinized sample to form the dough required for producing banana chips, resulting in distinct texture profiles. Finally, our research emphasizes the useful application of modified banana flour in the food industry and emphasizes how crucial it is to choose the right modification method to achieve the desired effects on the product.

Effect of Konjac Glucomannan on Structure, Physicochemical Properties, and In Vitro Digestibility of Yam Starch during Extrusion

In this study, the effect of konjac glucomannan (KGM, 0-5%) on the structure, physicochemical properties, and in vitro digestibility of extruded yam starch (EYS) was investigated. The EYS became rougher on the surface and the particle size increased as observed using scanning electron microscopy and particle size analysis. X-ray diffraction and Raman results revealed that the relative crystallinity (18.30% to 22.30%) of EYS increased, and the full width at half maxima at 480 cm-1 decreased with increasing KGM content, indicating the increment of long-range and short-range ordered structure. Differential scanning calorimetry and rheological results demonstrated that KGM enhanced thermal stability and the gel strength of EYS due to enhanced interaction between KGM and YS molecules. Additionally, a decrease in the swelling power and viscosity of EYS was observed with increased KGM content. The inclusion of KGM in the EYS increased the resistant starch content from 11.89% to 43.51%. This study provides a dual-modified method using extrusion and KGM for modified YS with high thermal stability, gel strength, and resistance to digestion.

Effect of modified starches on the quality of skins of glutinous rice dumplings

This study aimed to investigate the influence of modified starches on the quality of skins of glutinous rice dumplings (SGRDs), including changes in textural properties, pasting parameters, microstructure, color, transparency, and sensory quality. The results showed that the addition of a single acetylated-modified cassava or potato starch or composite modified cassava and potato starch in a ratio of 2:1 can improve the quality of SGRDs. The springiness and lightness of SGRDs increased, and the transparency increased from 3.22 % to 6.18 %. The cooked samples had delicate mouth-feel, uniform color and luster, good transparency, no depression, and low weight loss and did not stick to the teeth. Moreover, the total consumer acceptability score increased from 60.67 to 89.33, indicating that these products were widely accepted by consumers. However, the addition of hydroxypropyl-modified cassava starch or its composite with other two modified starches had no apparent effect on the quality of SGRDs. In conclusion, the quality of SGRDs were significantly improved by the addition of single or composite acetylated-modified starches. This study provides a theoretical basis for improving the quality of SGRDs.

Structural and physicochemical characteristics of wheat starch as influenced by freeze-thawed cycles and antifreeze protein from Sabina chinensis (Linn.) Ant. cv. Kaizuca leaves

The effects of freeze-thawed cycles (FTs) and a new antifreeze protein from Sabina chinensis (Linn.) Ant. cv. Kaizuca leaves (ScAFP) on the structure and physicochemical characteristics of wheat starch were studied. The mechanical breaking exerted by ice crystals on starch granules during FTs gradually deepened, sequentially squeezing the surface (2-6 FTs), amorphous region (8 FTs) and crystalline region (10 FTs) of starch granules. These changes led to reduced thermal stability, increased retrogradation tendency, and weakened gel network structure. The addition of ScAFP retarded the damage of ice crystals on starch granule structure and crystal structure during FTs, and significantly reduced the retrogradation tendency. Compared with native starch, the hardness of freeze-thawed starch without and with added ScAFP after 10 FTs decreased by 17.85% and 9.22%, respectively, indicating ScAFP improved the gel texture properties of freeze-thawed starch. This study provides new strategies for improving the quality of frozen starch-based foods.

Effect of electron beam irradiation on granular cold-water swelling chestnut starch: Improvement of cold-water solubility, multiscale structure, and rheological properties

In this study, granular cold-water swelling (GCWS) starch was prepared from chestnut starch by ethanol-alkali method, after which it was further modified by electron beam irradiation (EBI) technique to investigate the effect of EBI on GCWS chestnut starch. It was shown that the alcohol-alkali treatment disrupted the starch double helix structure and the starch crystalline form had been changed from "C" to "V" type. On this basis, EBI continued to act on the disrupted starch chains and further cleaved the long chains into short chains, which significantly improved the solubility of starch to 90.08 % in cold water at a 24 kGy irradiation dose. Therefore, this study can broaden the application scope of starch and provide new ideas for GCWS starch applications in food and water-soluble pharmaceutical industries.

Antioxidant Edible Films Based on Pear Juice and Pregelatinized Cassava Starch: Effect of the Carbohydrate Profile at Different Degrees of Pear Ripeness

Edible films based on fruit and vegetable purees combined with different food-grade biopolymeric binding agents (e.g., pectin, gelatin, starch, sodium alginate) are recognized as interesting packaging materials that benefit from the physical, mechanical, and barrier properties of biopolymers as well as the sensory and nutritional properties of purees. In the current contribution, edible antioxidant films based on pear juice and pregelatinized cassava starch were developed. In particular, the suitability of using pregelatinized cassava starch for the non-thermal production of these novel edible films was evaluated. In addition, the effects on the films' properties derived from the use of pear juice instead of the complete puree, from the content of juice used, and from the carbohydrate composition associated with the ripening of pears were all studied. The produced films were characterized in terms of their total polyphenol content, water sensitivity, and water barrier, optical, mechanical and antioxidant properties. Results showed that the use of pear juice leads to films with enhanced transparency compared with puree-based films, and that juice concentration and carbohydrate composition associated with the degree of fruit ripeness strongly govern the films' properties. Furthermore, the addition of pregelatinized cassava starch at room temperature discloses a significant and favorable impact on the cohesiveness, lightness, water resistance, and adhesiveness of the pear-juice-based films, which is mainly attributed to the effective interactions established between the starch macromolecules and the juice components.

Customizing Starch Properties: A Review of Starch Modifications and Their Applications

Starch has been a convenient, economically important polymer with substantial applications in the food and processing industry. However, native starches present restricted applications, which hinder their industrial usage. Therefore, modification of starch is carried out to augment the positive characteristics and eliminate the limitations of the native starches. Modifications of starch can result in generating novel polymers with numerous functional and value-added properties that suit the needs of the industry. Here, we summarize the possible starch modifications in planta and outside the plant system (physical, chemical, and enzymatic) and their corresponding applications. In addition, this review will highlight the implications of each starch property adjustment.

Toward a comprehensive understanding of various milling methods on the physicochemical properties of highland barley flours and eating quality of corresponding sugar-free cookies

Highland barley (HB) was subjected to dry-, semidry-, wet-milling methods and assessed for flour physicochemical properties and eating quality of corresponding sugar-free cookies. Results showed that there were significant differences between different milled flours in damaged starch content, particle size, hydration, pasting properties, and color. High a* values and poor hydration/pasting properties of wet-milled flours were associated with its smallest particle size and lowest content of damaged starch (25.3%), β-glucan (1.87%), and dietary fiber (10.87%), resulting in dark brown color, slightly high spread ratio, low hardness, and fast digestibility of the corresponding cookies. Conversely, the low digestibility of the cookies (predicted glycemic index 58.85) prepared from dry-milled flours was attributed to the higher content of dietary fiber, β-glucan and V-type starch-lipid complex, which would affect enzyme accessibility and may be beneficial for making HB sugar-free cookies. This study is expected to promote the development of HB functional foods.

Synthesis and characterization of citrate soft rice starch: A new strategy of producing disintegrating agent for design drug and resistant starch

Assam soft rice starch (ASRS) and Citric acid-esterified Assam soft rice starch (c-ASRS) were studied extensively. FTIR, CHN, DSC, XRD, SEM, TEM and optical microscope studies were performed for native and modified starches. Powder rearrangements, cohesiveness and flowability were studied by the Kawakita plot. Moisture and ash content was around 9 % and 0.5 %. In vitro digestibility of ASRS and c-ASRS produced functional RS. Paracetamol tablets were prepared using ASRS and c-ASRS as granulating-disintegrating agents through wet granulation methods. The prepared tablets' physical properties, disintegrant properties, in vitro dissolution and dissolution efficiency (DE) were performed. The average particle size was obtained at 6.59 ± 0.355 μm and 8.15 ± 0.168 μm for ASRS and c-ASRS, respectively. All the results were statistically significant at p < 0.05, p < 0.01 and p < 0.001. The amylose content was 6.78 %, classifying it as a low amylose type of starch. The disintegration time was reduced with the increasing concentration of ASRS and c-ASRS and facilitated the immediate release of the model drug from the tablet compact to improve its bioavailability. Therefore, the current investigation concludes that ASRS and c-ASRS can be used as novel and functional materials in pharmaceutical industries due to their unique physicochemical attributes. HYPOTHESIS: The central hypothesis of the current work was to develop citrated starch through a one-step reactive extrusion method and investigate its disintegrants property for pharmaceutical tablets. Extrusion is a continuous, simple, high-speed, low-cost, producing very limited wastewater and gas. Characterization was done through different instrumental techniques to confirm successful esterification. The flow properties were evaluated, and tablets were prepared at a different level of ASRS and c-ASRS (disintegrating agent), followed by the evaluation of tablets to confirm the model drug's dissolution and disintegration efficiency. Finally, in vitro digestibility of both ASRS and c-ASRS was analyzed to establish their potential nutritional benefits.

Breadfruit (Artocarpus altilis): Processing, nutritional quality, and food applications

Breadfruit is an underutilized but highly nutritive crop containing complex carbohydrates while being low in fat. It is also a good source of essential amino acids (leucine, isoleucine, and valine). With a better understanding of breadfruit’s morphology, its potential as a global solution to food security has been gaining popularity. Breadfruit has been forecasted to have a larger amount of suitable cultivable land area compared to major crops such as rice and wheat, making its cultivation more desirable. Due to its highly perishable nature, good post-harvesting and post-processing practices are essential to extend the shelf life of breadfruit for global transportation and consumption. This paper aims to provide a comprehensive review on various processing methods of flour and starch, nutritional significance and new food applications of this novel food staple. In this review, the effects of the different processing and post-processing methods of breadfruit flour and starch have been described, and the nutritional composition and application of breadfruit flour as an ingredient replacer in various food applications have been discussed. It is vital to understand the processing and post-processing methods of breadfruit flour to enhance its shelf-life, physicochemical and functional properties. Furthermore, a compilation of novel food applications has been done to promote its use in the food industry. In conclusion, breadfruit flour and starch are highly versatile for use in numerous food products with added health benefits.

Techno-Functional Properties of Corn Flour with Cowpea (Vigna unguilata) Powders Obtained by Extrusion

Legumes are a good source of vegetal protein that improves diets worldwide. Cowpea has been used as fortification agents in some traditional corn foods in developing countries such as Colombia. The work aimed to evaluate the physicochemical properties of extruded mixtures of corn and cowpea flours to assess the use of these mixes as vegetable protein ingredients. Corn flour was mixed with 15, 30, and 50% of cowpea flour and extruded for this proposal. After extrusion, mixtures were ground to produce a powder. Techno-functional properties of powders as water content, hygroscopicity, water absorption, fat absorption, water solubility index, swelling index, bulk density, Hausner ratio, Carr index, and porosity were evaluated in the mixtures, extrudates, and obtained powders to assess the effect of the addition of cowpea on these properties. Results showed that processing powder obtained by extrusion and drying could be used as a powder to regenerate with water as a source of protein. Moreover, storing processing samples in sections (pellet format) is convenient to avoid wetting since this format is less hygroscopic and the same mass occupies less storage volume than powders.

Functional, rheological, and microstructural properties of hydrothermal puffed and raw amaranth flour suspensions

The pseudocereal amaranth is commonly used in food as whole puffed grain. To improve the utilization of amaranth, hydrothermally treated suspensions of puffed and raw Amaranthus caudatus flour and their blends were investigated in this study. The suspensions were hydrothermally treated at 20, 50, and 80°C for 1, 5, and 24 h. The blends were treated at 80°C for 1 h. The effect of hydrothermal treatments of the suspensions on their morphological (color, SEM), water-binding, and rheological-functional properties was studied. The puffed amaranth suspensions exhibited cold swelling properties by rapid viscosity increase and significant water absorption properties. It was found that hydrothermal treatment at 80°C for 1 h significantly increased water absorption and viscosity in puffed and raw flour suspensions. However, the puffed suspensions showed significantly higher values in water binding and viscosity. Suspensions of raw amaranth flour showed increasing color differences with increasing temperature. Blends of raw and puffed amaranth flour resulted in a decreasing color change with increasing puffed flour content. Water absorption of the samples increased with an increasing puffed flour content. Raw amaranth flour and the 50/50 (puffed/raw) blend had the lowest, 10/90 and 20/80 (puffed/raw), and showed similar viscosity profiles to suspensions of pure puffed flour.

Effects of Reheating Methods on Rheological and Textural Characteristics of Rice Starch with Different Gelatinization Degrees

Pregelatinized starch (PGS) is often used to improve the processing quality of foodstuffs, but little attention has been paid to the effects of different reheating methods and degree of starch gelatinization (DSG) on their rheological and textural properties. In this study, pregelatinized rice starches (RS) with gelatinization degrees ranging from 58% to 100% were prepared via different Rapid Visco Analyser (RVA) heating procedures and reheated in various methods, including high-power microwave (HM), low-power microwave (LM), and water bath. The rheological behavior and textural properties were explored, and the results demonstrated that the consistency, gel strength, hardness, and springiness of PGS in all tested samples decreased significantly after reheating. The storage modulus (G') of PGS increased dramatically while the thermal stability decreased. Interestingly, the reheating methods possessed various effects on the starch of different DSG.

Assessment of physicochemical, rheological, and thermal properties of Indian rice cultivars: Implications on the extrusion characteristics

The implications of physicochemical, rheological, and thermal properties of seven eminent Indian rice cultivars (PR 114, 121, 122, 123, 124, 126, and 127) on the extrusion behavior and physico-functionalities of the extrudates were investigated. The amylose and amylopectin content of the cultivars ranged between 12.72 to 28.86% and 71.14 to 87.28% in addition with protein and crude fat content that varied from 7.05 to 9.15% and 0.49 to 1.17%, respectively. The onset (r = 0.98), peak (r = 0.95), and conclusion (r = 0.98) temperatures of the cultivars were in positive correlation with amylose. Likewise, pasting temperature (r = 0.979), final viscosity (r = 0.91), set back viscosity (r = 0.89), and stability ratio (r = 0.90) of the cultivars demonstrated a significant positive correlation with the amylose content. However, peak (r = - 0.879) and hold viscosity (r = - 0.89) were negatively correlated. The cultivars were extruded at feed moisture of 15%, screw speed of 500 rpm and barrel temperature of 150°C. The extrudates characteristics viz., expansion ratio-1.82 (PR 123); bulk density-184 g/cc (PR 123); specific mechanical energy-262.35 Wh/kg; water absorption index (WAI)-6.26 (PR 122); water solubility index-48.52% (PR 123); hardness-148.63 N (PR 122); and hydration power-284% (PR 122) were viably hyphenated with the physicochemical and rheological behavior of cultivars. The physico-functional characterization of the extrudates in terms of their starch and protein structural indexes, α-amylase susceptibility; water soluble carbohydrates and proteins revealed the possibility of exploring these cultivars as a functionally viable and diverse ingredient for the production of ready-to-eat extrudates.