Current advances in the biosynthesis of hyaluronic acid with variable molecular weights

Effect of the combined addition of hyaluronic acid and gellan gum on the physicochemical and digestive properties of tofu

The aim of this study was to increase the quality of glucono-δ-lactone (GDL)-coagulated tofu by incorporating microbial polysaccharides. The effects of different concentrations (0.1 %, 0.2 %, 0.3 %) of hyaluronic acid (HA) and a fixed concentration (0.2 %) of low-acyl gellan gum (LAG) on the textural and digestive properties of tofu were investigated. Polysaccharide addition significantly enhanced tofu's texture; notably, the HA and LAG synergistically improved gel strength and water retention. Microstructural analysis revealed that HA filled the gel matrix and that LAG facilitated a coral-like structure. The LF-NMR and FTIR analyses indicated changes in water distribution and protein secondary structure, while XRD and XPS showed that the polysaccharides promoted protein aggregation resulting in a more stable tofu structure. In vitro digestion experiments demonstrated that although the digestibility of polysaccharide-enriched tofu was lower than that of nonenriched tofu, the amino acid content after digestion was higher. These properties positively influenced the satiety responses while maintaining the tofu's original nutritional value. Additionally, the addition of polysaccharides did not significantly affect the storage stability of tofu. In conclusion, the incorporation of HA and LAG significantly improved the quality of GDL-coagulated tofu, providing a theoretical basis for applying this technique in the food industry.

Expression and molecular characterization of an intriguing hyaluronan synthase (HAS) from the symbiont "Candidatus Mycoplasma liparidae" in snailfish

Background

Hyaluronan synthases (HASs) are ubiquitous in living organisms, and the hyaluronic acid (HA) synthesized by them are important to their body and well used in medicine, cosmetics and other fields. HAS from deep-sea creatures has not yet been explored before. The study aims to analyse the characteristics and enzyme kinetics of a novel hyaluronan synthase derived from the symbiont "Candidatus Mycoplasma liparidae" found in deep-sea snailfish (snHAS).

Methodology

snHAS was over-expressed using His 6 as tag in the study. The sequence alignment was conducted by Cluster W and then the phylogenetic analyse of HASs was performed by Mega 6.0 to investigate the position of snHAS during evolution. K m and V max were detected to study the enzyme kinetics of snHAS wildtype and its mutant. The molecular weight of HA was evaluated by high performance gel permeation chromatography (HPGPC). The cardiolipin was added to investigate whether it had a promoting effect on the snHAS.

Results

The length of snHAS was 933 bp with an open reading frame (ORF) of 310 amino acids. Unlike other repoted HASs, snHAS had no transmembrane region and was not classified into the currently known Class I or Class II. snHAS could synthesize hyaluronan with lower molecular weights using the substrates of uridine-diphosphate-N-acetylglucosamine (UDP-GlcNAc) and uridine-diphosphate-glucuronic acid (UDP-GlcA) in vitro. The K m values of snHAS were 258 ± 45 µM and 39 ± 5 µM for UDP-GlcNAc and UDP-GlcA, respectively, much lower than those from mice (K m for UDP-GlcA: 55 ± 5 µM; K m for UDP-GlcNAc: 870 ± 60 µM). The k cat/K m values of snHAS were 163.5 s-1 mM-1 and 8.08 s-1 mM-1 for UDP-GlcA and UDP-GlcNAc, respectively. Furthermore, the activity of snHAS was independent of cardiolipin.

Conclusions

snHAS was a novel HAS based on the characteristics of the animo acid sequence, which could produce low molecular weight of HA with high efficiency. This provides a molecular basis for the biosynthesis of low molecular weight of HA.

A Novel Technology to Boost Natural Production of Hyaluronic Acid in the Skin Tissue: Human Histology Study

INTRODUCTION

Combining monopolar radiofrequency (RF) with targeted ultrasound (TUS), this study investigated whether these modalities promote facial rejuvenation through the production of hyaluronic acid (HA) in human skin.

METHODS

Seven subjects (51-64 years, BMI 21.1-29.8 kg/m2) were enrolled and divided into three treatment groups in this single-center study; Group A (n = 3, simultaneous RF + TUS), Group B (n = 3, stand-alone RF), and control (n = 1, no treatment). Both treated groups underwent four (4) 60-min treatments on the face delivered 7-14 days apart. Punch biopsies (3 mm in diameter) were collected from the infra-auricular area at baseline and both follow-up visits and stained for HA by using hyaluronic acid binding protein. Digital photographs were taken to document changes in visual appearance. Finally, the subjects' comfort and satisfaction were assessed.

RESULTS

There was a statistically significant (p < 0.05) average increase at 1 month in the HA-stained area of +112 358.7 μm2 in group A (RF + TUS) representing an increase of 48.65%. The treatment effect peaked at 3 months with an increase of +156 345.2 μm2, corresponding to a 67.69% increase in the HA-stained area. In Group B, there was no significant difference in the average increase of the HA-stained area between 1 month (+14 830 μm2) and 3 months (+20 995 μm2) corresponding to a 6.76% and 9.56% increase, respectively. The control samples did not indicate any changes throughout the study. Digital photographs of the RF + TUS group showed both a decrease in rhytids and tighter skin. Therapies were comfortable with no adverse events.

CONCLUSION

Overall, this study has shown that the combination treatment of RF + TUS has a more pronounced and sustained effect on facial rejuvenation compared to RF alone. The measurable increase in the production of HA with simultaneous use of RF + TUS peaked at a 3-month follow-up, suggesting the gradual advancement of the treatment effect and overall improvement in facial appearance.

TRIAL REGISTRATION

ClinicalTrials.gov identifier: NCT05987917.

Microbial production of hyaluronic acid: The current advances, engineering strategies and trends

Hyaluronic acid (HA) is a versatile biomolecule with applications in medicine, cosmetics, and pharmaceuticals. While traditionally extracted from animal tissues, HA is now predominantly produced through microbial fermentation. Microbial fermentation using strains such as Streptococcus zooepidemicus, Corynebacterium glutamicum, and Bacillus subtilis offers a more scalable and sustainable alternative to chemical and animal extraction methods. Recent studies reveal promising yields from engineered strains of Corynebacterium glutamicum and Bacillus subtilis, utilizing advanced metabolic and genetic techniques. Recent advancements in genetic and metabolic engineering, as well as synthetic biology, have addressed some challenges related to molecular weight, viscosity, and by-product formation. This review focuses on the microbial production of HA using engineered strains, encompassing producer organisms, metabolic engineering strategies, industrial-scale production, and key factors influencing molecular weight. Furthermore, it addresses the challenges and potential solutions associated with HA production. Additional research is necessary to develop more efficient and robust engineered strains that exhibit resistance to contamination and can utilize low-cost substrates, such as Pseudomonas putida and Halomonas spp. By overcoming these challenges, researchers can advance the industrial production of HA and expand its applications, thereby contributing to the growth of the HA market.

Metabolic engineering of Escherichia coli for enhanced production of hyaluronic acid

OBJECTIVES

To enhance hyaluronic acid (HA) production in Escherichia coli by utilizing hasA genes from Streptococcus pyogenes and Streptococcus parauberis, and employing metabolic engineering strategies.

RESULTS

The expression of the hasA (SpaHasA) gene from S. parauberis in E. coli K12 W3110 led to higher HA production compared to the other gene. Knockout of the zwf and pfkA genes in the engineered E. coli expressing SpaHasA gene, further increased HA production to 891 mg l-1. Overexpression of the galU and ugd genes in the zwf and pfkA double mutant harboring the SpaHasA gene elevated HA output to 1017 mg l-1. Using the same engineered E. coli strain, optimizing the MgSO4 concentration in the culture medium enhanced production to 1187 mg l-1, and in fed-batch fermentation, it achieved 2283 mg HA l-1.

CONCLUSIONS

The hasA genes from various Streptococcus groups, especially S. parauberis, significantly boost HA production in E. coli, demonstrating their potential for microbial fermentation applications.

De novo synthesis of hyaluronic acid with tailored molecular weights using a new hyaluronidase SthHL

Hyaluronic acid (HA) exhibits various biological activities and functions, mainly governed by its molecular weight (MW). Traditional HA degradation methods encounter challenges such as environmental pollution and high costs. Thus, developing a safe cell factory with an efficient regulation strategy for one-step production of specific MW HA has attracted significant research interest. This study identified a new hyaluronidase, SthHL (approximately 21.9 kDa), from a microbial species. Additionally, SthHL was characterized, with R188 and V192 as key catalytic amino acids and no activity towards mannan and chondroitin sulfate. Subsequently, SthHL was introduced into Bacillus amyloliquefaciens SE-StAB, known for high MW HA production. By modulating expression, four different MW HAs were obtained and characterized. HAs are non-Newtonian fluids, and their free radical scavenging capacity increases linearly as the MW decreases. Significantly, HA oligosaccharides can promote intestinal health and exert a prebiotic effect. Therefore, this study offers a new strategy for synthesizing tailored MW HAs and valuable insights for exploring structure-effect relationships in various applications.

Treatment of Acute Ulcerative Colitis with Zinc Hyaluronate in Mice

Ulcerative colitis (UC) is a type of inflammatory bowel disease arising from numerous factors, while UC patients face insufficient treatment options and a high incidence of adverse reactions to the current therapies. As a functional food additive, hyaluronic acid plays a certain role in intestinal repair. In this study, we constructed a mouse model of dextran sulfate sodium (DSS)-induced UC to examine the effects and underlying mechanisms of action of zinc hyaluronate (ZnHA) on the pathogenesis of UC. ZnHA effectively alleviated key clinical UC symptoms, such as weight loss, loose stools, and bloody stools. Mechanistically, ZnHA attenuated the expression of inflammatory factors, such as tumor necrosis factor-α, interleukin (IL)-6, and myeloperoxidase while upregulating the expression of IL-10. Furthermore, through intestinal flora and short-chain fatty acid analyses, ZnHA was found to promote propionic acid production by enriching beneficial bacteria. ZnHA simultaneously enhanced the expression of tight junction proteins, specifically ZO-1 and occludin, thereby restoring intestinal barrier function. Overall, our findings elucidate the therapeutic potential of ZnHA in treating acute UC by inhibiting intestinal inflammation and regulating flora, while also providing further theoretical support for development of hyaluronic acid to treat this disease.

Biochemical Characterization and Mechanism of Thermostability of the Thermophilic Hyaluronate Lyase TcHly8D

Hyaluronate lyases are widely used in medicine and biochemical engineering and are also applied as a tool enzyme to prepare oligosaccharides with various biological activities. To date, only a few hyaluronate lyases are on sale with poor thermostability. In this study, a PL8 hyaluronate lyase, TcHly8D, was found from Thermasporomyces composti and expressed in Escherichia coli with a maximum yield of 1.77 × 109 U/L (3.14 g/L) in a 5-L bioreactor. The recombinant TcHly8D exhibited a high hyaluronate lyase activity of 5.64 × 105 U/mg and an excellent thermostability with half-lives of 184.9 h at 60 °C. Fifty micrograms of TcHly8D could catalyze 5 g of hyaluronic acid with an oligosaccharide yield of 84.8% in 4 h. The salt bridges, hydrogen bonds, and proline residues, but not disulfide bonds, played important roles in the thermostability of TcHly8D. These findings provide insights into the multifunctional application potential of TcHly8D in agriculture, medicine, and the food industry.

Developing a RecT-assisted endogenous CRISPR/SzCas9 system for precise genome editing in Streptococcus zooepidemicus

Streptococcus zooepidemicus is the most commonly utilized strain for industrial-scale hyaluronic acid (HA) production due to its capacity to produce high-quality HA. However, the lack of efficient genetic manipulation approaches has significantly hindered the industrial application of this species. In this study, we developed a RecT-assisted endogenous CRISPR/SzCas9 system to enable markerless gene deletion, gene substitution, stop codon insertion, and iterative editing in the industrially significant strain S. zooepidemicus for hyaluronic acid production. A variety of editing outcomes were achieved, including a 3186-bp deletion of the hylb gene, replacement of VHb, and insertion of stop codons into the sagA gene. Ultimately, we successfully developed an engineered strain, designated SD-3, which exhibited reduced toxicity and non-hemolytic properties. The hyaluronic acid production of SD-3 increased by 39.7%, reaching 10.8 g/L in a 5-L fermenter. This achievement represents the highest titer of high molecular weight hyaluronic acid to date, characterized by a uniform and high molecular weight of up to 2.8 × 106 Da.

Hyaluronic acid promotes heat-induced gelation of ginkgo seed proteins

This study aimed to investigate how varying concentrations (0.01-0.5 %, w/v) and molecular weights (50, 500, 1500 kDa) of hyaluronic acid (HA) affect the physicochemical properties of heat-induced ginkgo seed protein isolate (GSPI)-HA composite gel. Incorporating HA increased viscosity (up to 14 times) and charge (up to 23 %) of GSPI-HA aggregates, while reducing particle size (up to 31 %) and improving gel texture, particularly with high molecular weight HA. However, high concentrations (0.5 %, w/v) of HA weakened gel texture. Non-covalent bonds primarily drive the formation of a continuous gel network between HA and GSPI, resulting in small pores and enhanced hydration properties. With increasing HA molecular weight, non-covalent interactions between GSPI and HA increased, leading to improved gel thermal stability. Overall, the study suggests that manipulating the molecular weight and concentration of HA can enhance the gelling properties of GSPI, leading to the development of a diverse array of GSPI-HA composite gels with varied properties.

A comprehensive review on microbial hyaluronan-degrading enzymes: from virulence factors to biotechnological tools

Hyaluronan (HA), a natural high molecular weight polysaccharide, has extensive applications in cosmetology and medical treatment. Hyaluronan-degrading enzymes (Hyals) act as molecular scissors that cleave HA by breaking the glucosidic linkage. Hyals are present in diverse organisms, including vertebrates, invertebrates and microorganisms, and play momentous roles in biological processes. In recent years, microbial Hyals (mHyals) have gained considerable attention for their exceptional performance in the production and processing of HA. Moreover, the applications of mHyals have been greatly extended to various biomedical fields. To explore the potential applications of mHyals, a thorough comprehension is imperative. In this context, this review systematically summarizes the sources, structures, mechanisms and enzymatic properties of mHyals and discusses their biological functions in host invasion, disease development, and regulation of intestinal flora. Furthermore, versatile applications inspired by their biological functions in medicine development, molecular biology, and industrial biotechnology are comprehensively reviewed. Finally, prospects are presented to emphasize the importance of exploration, expression and characterization of mHyals and the necessity of excavating their potential in biotechnological fields.

Ketoprofen Associated with Hyaluronic Acid Hydrogel for Temporomandibular Disorder Treatment: An In Vitro Study

Temporomandibular disorders (TMD) are a public health problem that affects around 12% of the global population. The treatment is based on analgesics, non-steroidal anti-inflammatory, corticosteroids, anticonvulsants, or arthrocentesis associated with hyaluronic acid-based viscosupplementation. However, the use of hyaluronic acid alone in viscosupplementation does not seem to be enough to regulate the intra-articular inflammatory process. So, we propose to develop and evaluate the physicochemical and biological properties in vitro of hyaluronic acid hydrogels (HA) associated with ketoprofen (KET) as a new therapeutic treatment for TMD. The hydrogels were synthesized with 3% HA and 0.125, 0.250, 0.500, or 1% KET. Physicochemical analyses of Attenuated Total reflectance-Fourier transform infrared spectroscopy (FTIR), Thermogravimetry (TGA), Rheology by Frequency, Amplitude sweeps, temperature ramp, and scanning electron microscopy (SEM) were performed with or without sterilization and cycled. Cytocompatibility and genotoxicity (micronucleus assay) were performed in mouse macrophages (RAW 264-7) for 24 h. Results: FTIR spectrum showed characteristic absorptions of HA and KET. In the TGA, two mass loss peaks were observed, the first representing the water evaporation at 30 and 100 °C, and the second peaks between 200 and 300 °C, indicating the degradation of HA and KET. Rheology tests in the oscillatory regime classified the hydrogels as non-Newtonian fluids, time-dependent, and thixotropic. Mouse macrophages (RAW 264-7) presented viability of 83.6% for HA, 50.7% for KET, and 92.4%, 66.1%, 65.3%, and 87.7% for hydrogels, in addition to the absence of genotoxicity. Conclusions: Hyaluronic acid associated with ketoprofen shows satisfactory physicochemical and biological properties for use as viscosupplementation. As a limiting point of this study, further research is needed to evaluate the pharmacodynamic, toxicological, and pharmacokinetic characteristics of a complete organism.

Hyaluronic acid-functionalized MOFs for combined sunitinib and siRNA therapy in renal cell carcinoma

Sunitinib is a first-line treatment for renal cell carcinoma (RCC), but suffers from drug resistance, causing therapy failure. Therefore, nano-scale delivery systems should be introduced for targeted delivery. Metal-organic frameworks (MOFs) are attractive drug carriers that not only enable multidrug combination therapies but also exert photodynamic effects by incorporating photosensitizers as components. Here, a Zr-based porphyrinic nanoscale MOF, PCN-224, was prepared as the carrier for the co-delivery of sunitinib and the siRNA against vascular endothelial growth factor receptor-2 (VEGFR-2). Drug-loaded PCN-224 is coated with hyaluronic acid (HA) to prevent drug molecular leakage and to exert tumor-targeting effects (CD44 in tumor cells). Photodynamic therapy was conducted under 660 nm laser (50 mW·cm-2, 10 min) irradiation. Compared with St/siVEGFR-2@PCN-224@HA without the HA coating, St/siVEGFR-2@PCN-224@HA significantly suppressed cell viability and promoted cell apoptosis. Laser irradiation further increased the anti-cancer effect of St/siVEGFR-2@PCN-224@HA by generating cytotoxic ROS. H&E staining of major organs revealed no signs of damage, indicating the biosafety of St/siVEGFR-2@PCN-224@HA. The prepared St/siVEGFR-2@PCN-224@HA system enables triple inhibition of tumor growth via a combination of targeted therapy and genetic and photodynamic therapy to enhance the therapeutic effects on RCC.

Study on hyaluronic acid aquaphotomics-from one dimension to two dimension analysis

Hyaluronic acid (HA) is widely used in cosmetics because of its unique hygroscopic properties. However, it is difficult to characterize the interactions between HA and water molecules in the skin. In this study, we developed a fast and nondestructive method for visualizing skin water species based on aquaphotomics to elucidate the mechanism by which HA affected water species. The first HA-water system was introduced to investigate the relationship between HA and water species based on near-infrared (NIR) spectroscopy and aquaphotomics. NIR-hyperspectral imaging was then applied to characterize the distribution of different water species in the skin. The HA-water system results indicated that oligo HA had hydration behaviors opposite to those of low molecular weight HA. NIR hyperspectral imaging results showed that the intensity and spatial distribution of each water species within the skin model can be directly characterized by upgrading aquaphotomics from one-dimensional to two-dimensional. Studies showed that HA tetrasaccharides and 600-700 k Da HA could maintain the strength of skin water species. In summary, the visual representation of water species distribution enables rapid and nondestructive monitoring of macromolecule hydration with skin which could help cosmetics formulators to optimize their HA formulation to realize their best hygroscopic properties in the future.

Anionic cardiolipin stabilizes the transmembrane region of hyaluronan synthase and promotes catalysis-relevant dynamics

Hyaluronic acid (HA) is a glycosaminoglycan essential for cellular processes and finding increasingly applications in medicine, pharmaceuticals, and cosmetics. While membrane-integrated Class I hyaluronan synthase (HAS) catalyzes HA synthesis in most organisms, the molecular mechanisms by which HAS-lipid interactions impact HAS catalysis remain unclear. This study employed coarse-grained molecular dynamics simulation combined with dimensionality reduction to uncover the interplay between lipids and Streptococcus equisimilis HAS (SeHAS). A minimum of 67 % cardiolipin is necessary for HA synthesis, as determined through simulations using gradient-composed membranes. The anionic cardiolipin stabilizes the cationic transmembrane regions of SeHAS and thereby maintains its conformation. Moreover, the highly dynamic cardiolipin is required to modulate the catalysis-relevant motions in HAS and thus facilitate HA synthesis. These findings provide molecular insights essential not only for understanding the physiological functions of HAS, but also for the development of cell factories and enzyme catalysts for HA production.

A self-assembled, genetically engineered, irradiated tumor cell debris vaccine

Vaccine-based therapeutics for cancers face several challenges including lack of immunogenicity and tumor escape pathways for single antigen targets. It has been reported that radiotherapy has an in situ vaccine effect that provides tumor antigens following irradiation, helping to activate antigen-presenting cells (APCs). Herein, a new vaccine approach is developed by combining genetically engineered irradiated tumor cell debris (RTD) and hyaluronic acid (HA), termed HA@RTD. A cancer cell line is developed that overexpresses granulocyte-macrophage colony-stimulating factor (GM-CSF). A hydrogel was developed by covalent conjugation of HA with RTD proteins that acted as a potent vaccine system, the effects which were probed with T cell receptor sequencing. The engineered vaccine activated antitumor immunity responses and prevented tumor growth in mice even with a single immunization. HA@RTD vaccine efficacy was also assessed in therapeutic settings with established tumors and in combination with immune checkpoint blockade.

Nitrilotriacetic Acid Functionalized Microgels for Efficient Immobilization of Hyaluronan Synthase

Enzymes play a vital role in synthesizing complex biological molecules like hyaluronic acid (HA). Immobilizing enzymes on support materials is essential for their efficient use and reuse in multiple cycles. Microgels, composed of cross-linked, highly swollen polymer networks, are ideal for enzyme uptake owing to their high porosity. This study demonstrates the immobilization of His6-tagged hyaluronan synthase from Pasteurella multocida (PmHAS) onto nitrilotriacetic acid functionalized microgels using different bivalent ions (Ni2+, Co2+, Mn2+, Mg2+, and Fe2+) via metal affinity binding. The results indicate that using Ni2+ yields the microgels with the highest enzyme uptake and HA formation. The immobilized PmHAS enables repetitive enzymatic production, producing high molecular weight HAs with decreasing dispersities in each step. Furthermore, the highest reported yield of HA with high molecular weight for immobilized PmHAS is achieved. This system establishes a foundation for continuous HA formation, with future works potentially enhancing PmHAS stability through protein engineering.

Enzyme-mediated green synthesis of glycosaminoglycans and catalytic process intensification

Glycosaminoglycans (GAGs) are a family of structurally complex heteropolysaccharides that play pivotal roles in biological functions, including the regulation of cell proliferation, enzyme inhibition, and activation of growth factor receptors. Therefore, the synthesis of GAGs is a hot research topic in drug development. The enzymatic synthesis of GAGs has received widespread attention due to their eco-friendly nature, high regioselectivity, and stereoselectivity. The enhancement of the enzymatic synthesis process is the key to its industrial applications. In this review, we overviewed the construction of more efficient in vitro biomimetic synthesis systems of glycosaminoglycans and presented the different strategies to improve enzyme catalysis, including the combination of chemical and enzymatic methods, solid-phase synthesis, and protein engineering to solve the problems of enzyme stability, separation and purification of the product, preparation of structurally defined sugar chains, etc., and discussed the challenges and opportunities in large-scale green synthesis of GAGs.

Intestinal Delivery of Probiotics: Materials, Strategies, and Applications

Probiotics with diverse and crucial properties and functions have attracted broad interest from many researchers, who adopt intestinal delivery of probiotics to modulate the gut microbiota. However, the major problems faced for the therapeutic applications of probiotics are the viability and colonization of probiotics during their processing, oral intake, and subsequent delivery to the gut. The challenges of simple oral delivery (stability, controllability, targeting, etc.) have greatly limited the use of probiotics in clinical therapies. Nanotechnology can endow the probiotics to be delivered to the intestine with improved survival rate and increased resistance to the adverse environment. Additionally, the progress in synthetic biology has created new opportunities for efficiently and purposefully designing and manipulating the probiotics. In this article, a brief overview of the types of probiotics for intestinal delivery, the current progress of different probiotic encapsulation strategies, including the chemical, physical, and genetic strategies and their combinations, and the emerging single-cell encapsulation strategies using nanocoating methods, is presented. The action mechanisms of probiotics that are responsible for eliciting beneficial effects are also briefly discussed. Finally, the therapeutic applications of engineered probiotics are discussed, and the future trends toward developing engineered probiotics with advanced features and improved health benefits are proposed.

A structure-functionality insight into the bioactivity of microbial polysaccharides toward biomedical applications: A review

Microbial polysaccharides (MPs) are biopolymers secreted by microorganisms such as bacteria and fungi during their metabolic processes. Compared to polysaccharides derived from plants and animals, MPs have advantages such as wide sources, high production efficiency, and less susceptibility to natural environmental influences. The most attractive feature of MPs lies in their diverse biological activities, such as antioxidative, anti-tumor, antibacterial, and immunomodulatory activities, which have demonstrated immense potential for applications in functional foods, cosmetics, and biomedicine. These bioactivities are precisely regulated by their sophisticated molecular structure. However, the mechanisms underlying this precise regulation are not yet fully understood and continue to evolve. This article presents a comprehensive review of the most representative species of MPs, including their fermentation and purification processes and their biomedical applications in recent years. In particular, this work presents an in-depth analysis into the structure-activity relationships of MPs across multiple molecular levels. Additionally, this review discusses the challenges and prospects of investigating the structure-activity relationships, providing valuable insights into the broad and high-value utilization of MPs.

Advances of biological macromolecules hemostatic materials: A review

Achieving hemostasis is a necessary intervention to rapidly and effectively control bleeding. Conventional hemostatic materials currently used in clinical practice may aggravate the damage at the bleeding site due to factors such as poor adhesion and poor adaptation. Compared to most traditional hemostatic materials, polymer-based hemostatic materials have better biocompatibility and offer several advantages. They provide a more effective method of stopping bleeding and avoiding additional damage to the body in case of excessive blood loss. Various hemostatic materials with greater functionality have been developed in recent years for different organs using diverse design strategies. This article reviews the latest advances in the development of polymeric hemostatic materials. We introduce the coagulation cascade reaction after bleeding and then discuss the hemostatic mechanisms and advantages and disadvantages of various polymer materials, including natural, synthetic, and composite polymer hemostatic materials. We further focus on the design strategies, properties, and characterization of hemostatic materials, along with their applications in different organs. Finally, challenges and prospects for the application of hemostatic polymeric materials are summarized and discussed. We believe that this review can provide a reference for related research on hemostatic materials, contributing to the further development of polymer hemostatic materials.

Research progress of photo-crosslink hydrogels in ophthalmology: A comprehensive review focus on the applications

Hydrogel presents a three-dimensional polymer network with high water content. Over the past decade, hydrogel has developed from static material to intelligent material with controllable response. Various stimuli are involved in the formation of hydrogel network, among which photo-stimulation has attracted wide attention due to the advantages of controllable conditions, which has a good application prospect in the treatment of ophthalmic diseases. This paper reviews the application of photo-crosslink hydrogels in ophthalmology, focusing on the types of photo-crosslink hydrogels and their applications in ophthalmology, including drug delivery, tissue engineering and 3D printing. In addition, the limitations and future prospects of photo-crosslink hydrogels are also provided.

Advances in hyaluronic acid production: Biosynthesis and genetic engineering strategies based on Streptococcus - A review

Hyaluronic acid (HA), which is a highly versatile glycosaminoglycan, is widely applied across the fields of food, cosmetics, and pharmaceuticals. It is primary produced through Streptococcus fermentation, but the product presents inherent challenges concerning consistency and potential pathogenicity. However, recent strides in molecular biology have paved the way for genetic engineering, which facilitates the creation of high-yield, nonpathogenic strains adept at synthesizing HA with specific molecular weights. This comprehensive review extensively explores the molecular biology underpinning pivotal HA synthase genes, which elucidates the intricate mechanisms governing HA synthesis. Moreover, it delineates various strategies employed in engineering HA-producing strains.

Microneedles Based on a Biodegradable Polymer-Hyaluronic Acid

Transdermal transport can be challenging due to the difficulty in diffusing active substances through the outermost layer of the epidermis, as the primary function of the skin is to protect against the entry of exogenous compounds into the body. In addition, penetration of the epidermis for substances hydrophilic in nature and particles larger than 500 Da is highly limited due to the physiological properties and non-polar nature of its outermost layer, namely the stratum corneum. A solution to this problem can be the use of microneedles, which "bypass" the problematic epidermal layer by dispensing the active substance directly into the deeper layers of the skin. Microneedles can be obtained with various materials and come in different types. Of special interest are carriers based on biodegradable and biocompatible polymers, such as polysaccharides. Therefore, this paper reviews the latest literature on methods to obtain hyaluronic acid-based microneedles. It focuses on the current advancements in this field and consequently provides an opportunity to guide future research in this area.

The impact of different concentrations of hyaluronic acid on the pasting and microstructural properties of corn starch

Starch aging in starchy foods is a major problem affecting their quality. In order to improve the viscosity and textural properties of native starch gelatinization and retrogradation, this study investigated the effect of hyaluronic acid (HA) at different concentrations (2 %, 4 %, 6 % w/w) on the pasting and microstructure of corn starch (CS). The findings revealed that the addition of HA significantly enhanced the peak viscosity, solubility, and water-holding capacity of the CS-HA mixtures. Moreover, it reduced the pasting temperature, swelling force, and leaching of amylose. All the mixtures exhibited shear thinning and thixotropic properties. The CS-HA mixtures created a thicker pseudoplastic system with significantly enhanced shear stability. The structures of the mixtures were characterized using Fourier transform infrared spectroscopy and scanning electron microscopy. It was observed that HA effectively inhibited short-term retrogradation of starch, enhanced the interaction between CS and HA, and formed a dense honeycomb three-dimensional mesh structure. In conclusion, as a novel anionic hydrocolloid, HA holds great potential to improve the retrogradation properties of starch-based products.

Current issues and potential solutions for the electrospinning of major polysaccharides and proteins: A review

Biopolymers, especially polysaccharides and proteins, are the promising green replacement for petroleum based polymers. Due to their innate properties, they are effectively used in biomedical applications, especially tissue engineering, wound healing, and drug delivery. The fibrous morphology of biopolymers is essentially required for the effectiveness in these biomedical applications. Electrospinning (ES) is the most advanced and robust method to fabricate nanofibers (NFs) and provides a complete solution to the conventional methods issues. However, the major issues regarding fabricating polysaccharides and protein nanofibers using ES include poor electrospinnability, lack of desired fundamental properties for a specific application by a single biopolymer, and insolubility among common solvents. The current review provides the main strategies for effective electrospinning of the major biopolymers. The key strategies include blending major biopolymers with suitable biopolymers and optimizing the solvent system. A systematic literature review was done to provide the optimized solvent system of the major biopolymers along with their best possible biopolymeric blend for ES. The review also highlights the fundamental issues with the commercialization of ES based biomedical products and provides future directions to improve the fabrication of biopolymeric nanofibers.

Antibacterial activity of a polysaccharide isolated from Artemisia argyi leaf against Staphylococcus aureus and mechanism investigation

Abuse of antibiotics has led to excessive amounts of antibiotic residues in food and environment, thus enhancing pathogenic bacterium resistance and threatening human health. Therefore, searching and developing safe and green antibiotic alternatives are necessary. In this study, an Artemisia argyi leaf polysaccharide (AALP) fraction was extracted and analyzed. Chemical composition analysis showed that the carbohydrate, uronic acid, protein, and polyphenol content in AALP were 68.3 % ± 4.13 %, 9.4 % ± 0.86 %, 1.79 % ± 0.27 %, and 0.16 % ± 0.035 %, respectively. Chromatographic results suggested that AALP contained rhamnose, arabinose, glucosamine, galactose, glucose, xylose, mannose, galacturonic acid, and glucuronic acid in a molar ratio of 9.26, 1.35, 1.18, 3.04, 48.51, 2.33, 31.26, 3.93, and 9.08; the weight average molecular weight, number average molecular weight, and polydispersity of AALP were 5.41 kDa, 4.63 kDa, and 1.168, respectively. Fourier transform infrared spectroscopy indicated that AALP constituted the polysaccharide-specific groups of CH, CO, and OH. Meanwhile, AALP showed a dose-dependent inhibitory effect on Staphylococcus aureus in the inhibition zone assay, and the minimal inhibitory concentration was 1.25 mg/mL. Furthermore, AALP disrupted the cell wall, depolarized the inner membrane potential, and inhibited the activities of succinate dehydrogenase and malate dehydrogenase in S. aureus.

3D printed scaffolds based on hyaluronic acid bioinks for tissue engineering: a review

Hyaluronic acid (HA) is widely distributed in human connective tissue, and its unique biological and physicochemical properties and ability to facilitate biological structure repair make it a promising candidate for three-dimensional (3D) bioprinting in the field of tissue regeneration and biomedical engineering. Moreover, HA is an ideal raw material for bioinks in tissue engineering because of its histocompatibility, non-immunogenicity, biodegradability, anti-inflammatory properties, anti-angiogenic properties, and modifiability. Tissue engineering is a multidisciplinary field focusing on in vitro reconstructions of mammalian tissues, such as cartilage tissue engineering, neural tissue engineering, skin tissue engineering, and other areas that require further clinical applications. In this review, we first describe the modification methods, cross-linking methods, and bioprinting strategies for HA and its derivatives as bioinks and then critically discuss the strengths, shortcomings, and feasibility of each method. Subsequently, we reviewed the practical clinical applications and outcomes of HA bioink in 3D bioprinting. Finally, we describe the challenges and opportunities in the development of HA bioink to provide further research references and insights.

Structure-activity relationship of low molecular weight Astragalus membranaceus polysaccharides produced by Bacteroides

Astragalus membranaceus polysaccharides (APS) possess significant biological activities, such as anti-tumor, antiviral, and immunomodulatory activities. However, there is still a lack of research on the structure-activity relationship of APS. In this paper, two carbohydrate-active enzymes from Bacteroides in living organisms were used to prepare degradation products. The degradation products were divided into APS-A1, APS-G1, APS-G2, and APS-G3 according to molecular weight. Structural analysis showed that all degradation products had an α-1,4-linked glucose backbone, but APS-A1 and APS-G3 also had branched chains of α-1,6-linked galactose or arabinogalacto-oligosaccharide. In vitro, immunomodulatory activity evaluation results indicated that APS-A1 and APS-G3 had better immunomodulatory activity, while the immunomodulatory activities of APS-G1 and APS-G2 were comparatively weaker. Molecular interaction detection showed that APS-A1 and APS-G3 could bind to toll-like receptors-4 (TLR-4) with a binding constant of 4.6 × 10^-5 and 9.4 × 10^-6, respectively, while APS-G1 and APS-G2 failed to bind to TLR-4. Therefore, the branched chains of galactose or arabinogalacto-oligosaccharide played a crucial role in the immunomodulatory activity of APS.

Novel β1,4 N-acetylglucosaminyltransferase in de novo enzymatic synthesis of hyaluronic acid oligosaccharides

The efficiency of de novo synthesis of hyaluronic acid (HA) using Pasteurella multocida hyaluronate synthase (PmHAS) is limited by its low catalytic activity during the initial reaction steps when monosaccharides are the acceptor substrates. In this study, we identified and characterized a β-1,4-N-acetylglucosaminyl-transferase (EcGnT) derived from the O-antigen gene synthesis cluster of Escherichia coli O8:K48:H9. Recombinant β1,4 EcGnT effectively catalyzed the production of HA disaccharides when the glucuronic acid monosaccharide derivative 4-nitrophenyl-β-D-glucuronide (GlcA-pNP) was used as the acceptor. Compared with PmHAS, β1,4 EcGnT exhibited superior N-acetylglucosamine transfer activity (~ 12-fold) with GlcA-pNP as the acceptor, making it a better option for the initial step of de novo HA oligosaccharide synthesis. We then developed a biocatalytic approach for size-controlled HA oligosaccharide synthesis using the disaccharide produced by β1,4 EcGnT as a starting material, followed by stepwise PmHAS-catalyzed synthesis of longer oligosaccharides. Using this approach, we produced a series of HA chains of up to 10 sugar monomers. Overall, our study identifies a novel bacterial β1,4 N-acetylglucosaminyltransferase and establishes a more efficient process for HA oligosaccharide synthesis that enables size-controlled production of HA oligosaccharides. KEY POINTS: • A novel β-1,4-N-acetylglucosaminyl-transferase (EcGnT) from E. coli O8:K48:H9. • EcGnT is superior to PmHAS for enabling de novo HA oligosaccharide synthesis. • Size-controlled HA oligosaccharide synthesis relay using EcGnT and PmHAS.

Advances in Gelatin Bioinks to Optimize Bioprinted Cell Functions

Gelatin is a widely utilized bioprinting biomaterial due to its cell-adhesive and enzymatically cleavable properties, which improve cell adhesion and growth. Gelatin is often covalently cross-linked to stabilize bioprinted structures, yet the covalently cross-linked matrix is unable to recapitulate the dynamic microenvironment of the natural extracellular matrix (ECM), thereby limiting the functions of bioprinted cells. To some extent, a double network bioink can provide a more ECM-mimetic, bioprinted niche for cell growth. More recently, gelatin matrices are being designed using reversible cross-linking methods that can emulate the dynamic mechanical properties of the ECM. This review analyzes the progress in developing gelatin bioink formulations for 3D cell culture, and critically analyzes the bioprinting and cross-linking techniques, with a focus on strategies to optimize the functions of bioprinted cells. This review discusses new cross-linking chemistries that recapitulate the viscoelastic, stress-relaxing microenvironment of the ECM, and enable advanced cell functions, yet are less explored in engineering the gelatin bioink. Finally, this work presents the perspective on the areas of future research and argues that the next generation of gelatin bioinks should be designed by considering cell-matrix interactions, and bioprinted constructs should be validated against currently established 3D cell culture standards to achieve improved therapeutic outcomes.

Efficient production of hyaluronic acid by Streptococcus zooepidemicus using two-stage semi-continuous fermentation

Hyaluronic acid is a kind of mucopolysaccharide that has wide applications in cosmetics, health food, and orthopedics. Using Streptococcus zooepidemicus ATCC 39920 as parent, a beneficial mutant SZ07 was obtained by UV mutagenesis, giving 1.42 g/L hyaluronic acid in shake flasks. To enhance the efficiency of hyaluronic acid production, a semi-continuous fermentation process consisted of two-stage 3-L bioreactors was developed, in which 1.01 g/L/h productivity and 14.60 g/L hyaluronic acid were obtained. To further enhance the titer of hyaluronic acid, recombinant hyaluronidase SzHYal was added into 2^nd stage bioreactor at 6 h to reduce the viscosity of broth. The highest hyaluronic acid titer of 29.38 g/L was achieved with a productivity of 1.13 g/L/h at 300 U/L SzHYal after 24 h. This newly developed semi-continuous fermentation process provides a promising strategy for the industrial production of hyaluronic acid and related polysaccharides.

In Vitro Fermentation of Hyaluronan with Different Molecular Weights by Human Gut Microbiota: Differential Effects on Gut Microbiota Structure and Metabolic Function

Hyaluronan (HA) has various biological functions and is used extensively as a dietary supplement. Previous studies have shown that the probiotic effects of polysaccharides are closely associated with their molecular properties. The intestinal microbiota has been demonstrated to degrade HA; however, the regulatory effects of different molecular weights (MW) of HA on gut microbiota and metabolites are unknown. In the present study, we performed in vitro fermentation of human-derived feces for three MWs of HA (HA1, 32.3 kDa; HA2, 411 kDa; and HA3, 1510 kDa) to investigate the differences in the fermentation properties of HA with different MWs. We found that gut microbiota can utilize all HAs and, consequently, produce large amounts of short-chain fatty acids (SCFAs). In addition, we showed that all three HA MWs promoted the growth of Bacteroides, Parabacteroides, and Faecalibacterium, with HA1 being more effective at promoting the growth of Bacteroides. HAs have various regulatory effects on the structure and metabolites of the gut microbiota. Spearman's correlation analysis revealed that alterations in gut microbiota and their metabolites were significantly correlated with changes in metabolic markers. For instance, HA1 enriched α-eleostearic acid and DL-3-aminoisobutyric acid by regulating the abundance of Bacteroides, and HA3 enriched Thymidin by regulating Faecalibacterium. Collectively, the fermentation properties of HA vary across MW, and our results provide insights into the potential association between the MW of HA and its fermentation characteristics by the gut microbiota. These findings provide insights into the influence of the gut microbiota and HAs on the health of the host.

Antioxidant and antibacterial activities of a polysaccharide produced by Chaetomium globosum CGMCC 6882

In the present work, a Gynostemma pentaphyllum herb endophytic fungus of Chaetomium globosum CGMCC 6882 polysaccharide produced from tapioca starch (GCP-TS) with submerged fermentation was analyzed. GCP-TS contains rhamnose, glucosamine, galactose, glucose, mannose, and glucuronic acid in the molar ratio of 6.29: 0.55: 1.12: 22.93: 10.94: 3.54. Its weight-average molecular weight, number-average molecular weight and polydispersity were 4.73 × 10⁴ Da, 4.29 × 10⁴ Da and 1.103, respectively. Antioxidant results showed that GCP-TS had a concentration-dependent scavenging ability against DPPH radical, superoxide anion, hydroxyl radical, and ABTS radical. The corresponding scavenging capacities of GCP-TS aqueous solution at the concentration of 1.0 mg/mL were 45.11 ± 2.52, 43.58 ± 1.97, 36.27 ± 2.48, and 34.39 ± 2.06 %, respectively. Antibacterial activities of GCP-TS against Staphylococcus aureus and Escherichia coli were enhanced with the increase in its concentration, and its bacteriostatic activity against S. aureus was stronger than that against E. coli.

From crosslinking strategies to biomedical applications of hyaluronic acid-based hydrogels: A review

Hyaluronic acid (HA) is not only a natural anionic polysaccharide with excellent biocompatibility, biodegradability, and moisturizing effect, but also an essential factor that can affect angiogenesis, inflammation, cell behavior, which has a wide range of applications in the biomedical field. Among them, HA-based hydrogels formed by various physical or chemical crosslinking strategies are particularly striking. They not only retain the physiological function of HA, but also have the skeleton function of hydrogel, which further expands the application of HA. However, HA-based natural hydrogels generally have problems such as insufficient mechanical strength and susceptibility to degradation by hyaluronidase, which limits their application to a certain extent. To solve such problems, researchers have prepared a variety of HA-based multifunctional hydrogels with remarkable properties in recent years by adopting various structural modification methods or novel crosslinking strategies, as well as introducing functionally reactive molecules or moieties, which have extended the application scope. This manuscript systematically introduced common crosslinking strategies of HA-based hydrogels and highlighted the development of novel HA-based hydrogels in anticancer drug delivery, cartilage repair, three-dimensional cell culture, skin dressing and other fields. We hope to provide some references for the subsequent development of HA-based hydrogels in the biomedical field.

Effect of ultrasonic degradation on the structural feature, physicochemical property and bioactivity of plant and microbial polysaccharides: A review

With the bioactivities of antioxidant, anti-bacteria, anti-inflammation, immune regulation, antitumor and anti-coagulation, plant and microbial polysaccharides have been widely used in foods, medicine and cosmetics. However, how structure features affect the physicochemical property and bioactivity of plant and microbial polysaccharides is still unclear. Ultrasonic degradation usually degrades or modifies plant and microbial polysaccharides with different physicochemical properties and bioactivities by affecting their chemical or spatial structures via mechanical bond breaking and cavitation effects. Therefore, ultrasonic degradation might be an effective strategy for producing bioactive plant and microbial polysaccharides and analyzing their structure-function relationship. Present review summarized the influence of ultrasonic degradation on structural feature, physicochemical property and bioactivity of plant and microbial polysaccharides. Moreover, further problems need to be paid attention to during the application of ultrasonication for plant and microbial polysaccharides degradation are also recommended. Overall, present review will provide an efficient method for producing enhanced bioactive plant and microbial polysaccharides and analyzing their structure-activity relationship based on ultrasonic degradation.

Different molecular weights of hyaluronan research in knee osteoarthritis: A state-of-the-art review

Osteoarthritis (OA), the most common form of arthritis, is characterized by progressive cartilage destruction, concomitant adaptive osteogenesis, and loss of joint function. The progression of OA with aging is associated with a decrease in native hyaluronan (HA, hyaluronate or hyaluronic acid) with a high molecular weight (HMW) in synovial fluid and a subsequent increase in lower MW HA and fragments. As HMW HA possesses numerous biochemical and biological properties, we review new molecular insights into the potential of HA to modify OA processes. Different MWs in the formulation of products appear to have varying effects on knee OA (KOA) pain relief, improved function, and postponing surgery. In addition to the safety profile, more evidence indicates that intraarticular (IA) HA administration may be an effective option to treat KOA, with a particular emphasis on the use of HA with fewer injections of higher MW, including potential applications of HA of very HMW. We also analyzed published systemic reviews and meta-analyses of IA HA in treating KOA in order to discuss their conclusions and consensus statements. According to its MW, HA may offer a simple way to refine therapeutic information in selective KOA.

Genetic variation reveals the enhanced microbial hyaluronan biosynthesis via atmospheric and room temperature plasma

This study reveals the genetic and biochemical changes underlying the enhanced hyaluronan (HA) biosynthesis in Streptococcus zooepidemicus. After multiple rounds of atmospheric and room temperature plasma (ARTP) mutagenesis combined with novel bovine serum albumin/cetyltrimethylammonium bromide coupled high-throughput screening assay, the HA yield of the mutant was increased by 42.9% and reached 0.813 g L^-1 with a molecular weight of 0.54 × 10⁶ Da within 18 h by shaking flask culture. HA production was increased to 4.56 g L^-1 by batch culture in 5-L fermenter. Transcriptome sequencing exhibits that distinct mutants have similar genetic changes. Regulation in direction of metabolic flow into the HA biosynthesis, by enhancing genes responsible for the biosynthesis of HA including hasB, glmU and glmM, weaking downstream gene (nagA and nagB) of UDP-GlcNAc and significantly down-regulating transcription of wall-synthesizing genes, resulting in the accumulation of precursors (UDP-GlcA and UDP-GlcNAc) increased by 39.74% and 119.22%, respectively. These associated regulatory genes may provide control point for engineering of the efficient HA-producing cell factory.

Development of In Situ Product Recovery (ISPR) System Using Amberlite IRA67 for Enhanced Biosynthesis of Hyaluronic Acid by Streptococcus zooepidemicus

High broth viscosity due to the accumulation of hyaluronic acid (HA) causes a limited yield of HA. It is a major problem of HA production using Streptococcus zooepidemicus. Extractive fermentation via in situ product recovery (ISPR) was utilized to enhance the HA production. Resins from Amberlite: IRA400 Cl; IRA900 Cl; IRA410 Cl; IRA402 Cl; and IRA67 were tested for the HA adsorption. IRA67 showed high adsorption capacity on HA. The study of the adsorption via a 2 L stirred tank bioreactor of S. zooepidemicus fermentation was investigated to elucidate the adsorption of HA onto IRA67 in dispersed and integrated internal column systems. The application of a dispersed IRA67 improved the HA production compared to the fermentation without resin addition by 1.37-fold. The HA production was further improved by 1.36-fold with an internal column (3.928 g/L) over that obtained with dispersed IRA67. The cultivation with an internal column shows the highest reduction of viscosity value after the addition of IRA67 resin: from 58.8 to 23.7 (mPa·s), suggesting the most effective ISPR of HA. The improved biosynthesis of HA indicated that an extractive fermentation by ISPR adsorption is effective and may streamline the HA purification.

Absorption, metabolism, and functions of hyaluronic acid and its therapeutic prospects in combination with microorganisms: A review

Hyaluronic acid (HA) is key to the stability of the internal environment of tissues. HA content in tissues gradually decreases with age, causing age-related health problems. Exogenous HA supplements are used to prevent or treat these problems including skin dryness and wrinkles, intestinal imbalance, xerophthalmia, and arthritis after absorption. Moreover, some probiotics are able to promote endogenous HA synthesis and alleviate symptoms caused by HA loss, thus introducing potential preventative or therapeutic applications of HA and probiotics. Here, we review the oral absorption, metabolism, and biological function of HA as well as the potential role of probiotics and HA in increasing the efficacy of HA supplements.

Hyaluronic acid hydrolysis using vacuum ultraviolet TiO2 photocatalysis combined with an oxygen nanobubble system

Advanced technologies for producing high-quality low molecular weight hyaluronic acid (LMW-HA) are required from the perspective of cost-efficiency and biosafety. Here, we report a new LMW-HA production system from high molecular weight HA (HMW-HA) using vacuum ultraviolet TiO₂ photocatalysis with an oxygen nanobubble system (VUV-TP-NB). The VUV-TP-NB treatment for 3 h resulted in a satisfactory LMW-HA (approximately 50 kDa measured by GPC) yield with a low endotoxin level. Further, there were no inherent structural changes in the LMW-HA during the oxidative degradation process. Compared with conventional acid and enzyme hydrolysis methods, VUV-TP-NB showed similar degradation degree with viscosity though reduced process time by at least 8-fold. In terms of endotoxin and antioxidant effects, degradation using VUV-TP-NB demonstrated the lowest endotoxin level (0.21 EU/mL) and highest radical scavenging activity. This nanobubble-based photocatalysis system can thus be used to produce biosafe LMW-HA cost-effectively for food, medical, and cosmetics applications.

Hydrogel-based delivery system applied in the local anti-osteoporotic bone defects

Osteoporosis is an age-related systemic skeletal disease leading to bone mass loss and microarchitectural deterioration. It affects a large number of patients, thereby economically burdening healthcare systems worldwide. The low bioavailability and complications, associated with systemic drug consumption, limit the efficacy of anti-osteoporosis drugs currently available. Thus, a combination of therapies, including local treatment and systemic intervention, may be more beneficial over a singular pharmacological treatment. Hydrogels are attractive materials as fillers for bone injuries with irregular shapes and as carriers for local therapeutic treatments. They exhibit low cytotoxicity, excellent biocompatibility, and biodegradability, and some with excellent mechanical and swelling properties, and a controlled degradation rate. This review reports the advantages of hydrogels for adjuvants loading, including nature-based, synthetic, and composite hydrogels. In addition, we discuss functional adjuvants loaded with hydrogels, primarily focusing on drugs and cells that inhibit osteoclast and promote osteoblast. Selecting appropriate hydrogels and adjuvants is the key to successful treatment. We hope this review serves as a reference for subsequent research and clinical application of hydrogel-based delivery systems in osteoporosis therapy.

Prospective bacterial and fungal sources of hyaluronic acid: A review

The unique biological and rheological properties make hyaluronic acid a sought-after material for medicine and cosmetology. Due to very high purity requirements for hyaluronic acid in medical applications, the profitability of streptococcal fermentation is reduced. Production of hyaluronic acid by recombinant systems is considered a promising alternative. Variations in combinations of expressed genes and fermentation conditions alter the yield and molecular weight of produced hyaluronic acid. This review is devoted to the current state of hyaluronic acid production by recombinant bacterial and fungal organisms.

Structural Characterization of a Polygonatum cyrtonema Hua Tuber Polysaccharide and Its Contribution to Moisture Retention and Moisture-Proofing of Porous Carbohydrate Material

Porous carbohydrate materials such as tobacco shreds readily absorb moisture and become damp during processing, storage, and consumption (smoking). Traditional humectants have the ability of moisture retention but moisture-proofing is poor. Polygonatum cyrtonema Hua polysaccharide (PCP 85−1−1) was separated by fractional precipitation and was purified by anion exchange and gel permeation chromatography. The average molecular weight (Mw) of PCP 85−1−1 was 2.88 × 10³ Da. The monosaccharide composition implied that PCP 85−1−1 consisted of fucose, glucose, and fructose, and the molar ratio was 22.73:33.63:43.65. When 2% PCP 85−1−1 was added to tobacco shreds, the ability of moisture retention and moisture-proofing were significantly enhanced. The moisture retention index (MRI) and moisture-proofing index (MPI) increased from 1.95 and 1.67 to 2.11 and 2.14, respectively. Additionally, the effects of PCP 85−1−1 on the aroma and taste of tobacco shreds were evaluated by electronic tongue and gas chromatography–mass spectrometry (GC-MS). These results indicated that PCP 85−1−1 had the characteristics of preventing water absorption under high relative humidity and moisturizing under dry conditions. The problem that traditional humectants are poorly moisture-proof was solved. PCP 85−1−1 can be utilized as a natural humectant on porous carbohydrates, which provides a reference for its development and utilization.

Effect of ultrasonic degradation on the physicochemical property and bioactivity of polysaccharide produced by Chaetomium globosum CGMCC 6882

Similar to the enzymatic process, there might also be an active fragment in polysaccharides, how to obtain is important for investigating the bioactivity and pharmacological mechanism of polysaccharides. Presently, a Gynostemma pentaphyllum endophytic fungus Chaetomium globosum CGMCC 6882 polysaccharide [Genistein Combined Polysaccharide (GCP)] was degraded by ultrasonic treatment, two polysaccharide fragments of GCP-F1 and GCP-F2 were obtained. Physicochemical results showed that GCP-F1 and GCP-F2 had the same monosaccharide composition of arabinose, galactose, glucose, xylose, mannose, and glucuronic acid as compared to GCP with slightly different molar ratios. However, weight-average molecular weights of GCP-F1 and GCP-F2 decreased from 8.093 × 10⁴ Da (GCP) to 3.158 × 10⁴ Da and 1.027 × 10⁴ Da, respectively. In vitro scavenging assays illustrated that GCP-F1 and GCP-F2 had higher antioxidant activity against 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical, 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical, superoxide anions, and hydroxyl radical than GCP, the order was GCP < GCP-F1 < GCP-F2. Meanwhile, antibacterial tests showed that ultrasonic degradation increased the antibacterial activity of GCP-F1 as compared to GCP, but GCP-F2 almost lost its antibacterial activity with further ultrasound treatment. Changes in the antioxidant and antibacterial activities of GCP-F1 and GCP-F2 might be related to the variation of their molecular weights.

Biochemical and Molecular Characteristics of a Novel Hyaluronic Acid Lyase from Citrobacter freundii

The Gram-negative strain of Citrobacter freundii, YNLX, has the ability to degrade hyaluronic acid. In this study, we expressed a C. freundii hyaluronic acid lyase, from polysaccharide lyase family 8, in Escherichia coli. The purified recombinant enzyme (rHynACF8) showed a substantially higher cleavage activity of hyaluronic acid than chondroitin sulfate. We found that its optimal pH and temperature are 5.5 and 35 °C, respectively. In addition, the enzyme activity was not notably affected by most metal ions. Km and kcat of rHynACF8 towards HA were 1.5 ± 0.01 mg/mL and 30.9 ± 0.5 /s, respectively. rHynACF8 is an endo-acting enzyme. Its cleavage products had dramatically increased antioxidant activity than hyaluronic acid in vitro (p < 0.001). As the molecular weight of hyaluronic acid decreased, the intramolecular interactions among antioxidant functional groups were removed; in the process of the cracking reaction, new double bonds formed and conjugated with the carbonyl group. We presumed that the structural change is the critical factor influencing antioxidant capacity. Overall, we found that rHynACF8 from Gram-negative bacteria with metal ion resistance, indicated the relationship between the function and structure of its antioxidant cleavage product.

The effect of chitosan/TiO2/hyaluronic acid subphase on the behaviour of 1,2-dioleoyl-sn-glycero-3-phosphocholine membrane

The main aim of the study was to determine the effect of two polysaccharides: chitosan (Ch) and hyaluronic acid (HA), and/or titanium dioxide (TiO₂) on the structure and behaviour of the 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) membrane. To achieve this goal the surface pressure as a function of the area per molecule (π-A) isotherm for the phospholipid monolayer was recorded. The shape of the π-A isotherms and compression-decompression cycles, as well as the compression modulus values, were analysed in terms of biocompatibility. Besides, morphology and thickness of the phospholipid layers obtained by means of Brewster angle microscope at different π, were determined. The obtained results show that both polysaccharides Ch, HA, as well inorganic TiO₂ affect slightly the structure of the DOPC monolayer but do not disrupt it. Their presence brings no typical arrangements of both the polar heads and tails of DOPC molecules at the interface.

Characterization and Antibacterial Activity of a Polysaccharide Produced From Sugarcane Molasses by Chaetomium globosum CGMCC 6882

As a by-product of the sugar industry containing many sugars, proteins, nitrogenous materials, and heavy metals, molasses is rarely used for polysaccharide production. In the present work, a Chaetomium globosum CGMCC 6882 polysaccharide was produced from sugarcane molasses (CGP-SM) was successfully produced from sugarcane molasses. The yield of CGP-SM was 5.83 ± 0.09 g/l and its protein content was 2.41 ± 0.12% (w/w). Structural analysis showed that CGP-SM was a crystalline and amorphous polysaccharide containing rhamnose, glucosamine, galactose, glucose, mannose, fructose, and glucuronic acid in the molar ratio of 10.31: 1.14: 2.07: 59.55: 42.65: 1.92: 9.63. Meanwhile, weight-average molecular weight (Mw), number-average molecular weight (Mn), and polydispersity (Mw/Mn) of CGP-SM were 28.37 KDa, 23.66 KDa, and 1.199, respectively. Furthermore, the bacteriostatic assay indicated that CGP-SM inhibited the growth of Escherichia coli and Staphylococcus aureus in a concentration-dependent manner, and its inhibitory effect on S. aureus was higher than that of E. coli. Above all, this work provides a green method for the production of bioactive polysaccharide from sugarcane molasses.