Cellulose nanocrystals: Fundamentals and biomedical applications

Controllable acetylation of cellulose nanocrystal by uniform design and response surface methodology

Acetylation of Cellulose nanocrystal (CNC) can reduce its surface polarity and therefore extends its application in biomedical and chemical fields. A method combining uniform design (UD) and response surface methodology (RSM) was developed to produce the acetylated CNC with arbitrary degree of substitution (DS) and crystallinity index (CrI). The effects of three factors (i.e., temperature, reaction time and the volume of acetic anhydride) on DS and CrI were investigated in their respective ranges (i.e., 60-90 oC, 1.0-5.0 h and 1.0-5.0 mL). Both mathematical models for DS and CrI were developed by multiple stepwise regression (MSR) based on UD data and their significances were evaluated by analysis of variance. The controllable acetylation of CNC was realized by using either UD alone or the combination of UD and RSM. Eight verification experiments show that the relative errors between the predicted and the measured results are less than 16.77 % and 6.08 % for DS and CrI, respectively, confirming the reliability and validity of the method. This developed methodology is ingenious and expected to be expanded to any other fields that controllable preparations are required.

Nanocellulose-based hydrogels as versatile materials with interesting functional properties for tissue engineering applications

Tissue engineering has emerged as a remarkable field aiming to restore or replace damaged tissues through the use of biomimetic constructs. Among the diverse materials investigated for this purpose, nanocellulose-based hydrogels have garnered attention due to their intriguing biocompatibility, tunable mechanical properties, and sustainability. Over the past few years, numerous research works have been published focusing on the successful use of nanocellulose-based hydrogels as artificial extracellular matrices for regenerating various types of tissues. The review emphasizes the importance of tissue engineering, highlighting hydrogels as biomimetic scaffolds, and specifically focuses on the role of nanocellulose in composites that mimic the structures, properties, and functions of the native extracellular matrix for regenerating damaged tissues. It also summarizes the types of nanocellulose, as well as their structural, mechanical, and biological properties, and their contributions to enhancing the properties and characteristics of functional hydrogels for tissue engineering of skin, bone, cartilage, heart, nerves and blood vessels. Additionally, recent advancements in the application of nanocellulose-based hydrogels for tissue engineering have been evaluated and documented. The review also addresses the challenges encountered in their fabrication while exploring the potential future prospects of these hydrogel matrices for biomedical applications.

Cellulose-Based Hydrogels for Wastewater Treatment: A Focus on Metal Ions Removal

The rapid worldwide industrial growth in recent years has made water contamination by heavy metals a problem that requires an immediate solution. Several strategies have been proposed for the decontamination of wastewater in terms of heavy metal ions. Among these, methods utilizing adsorbent materials are preferred due to their cost-effectiveness, simplicity, effectiveness, and scalability for treating large volumes of contaminated water. In this context, heavy metal removal by hydrogels based on naturally occurring polymers is an attractive approach for industrial wastewater remediation as they offer significant advantages, such as an optimal safety profile, good biodegradability, and simple and low-cost procedures for their preparation. Hydrogels have the ability to absorb significant volumes of water, allowing for the effective removal of the dissolved pollutants. Furthermore, they can undergo surface chemical modifications which can further improve their ability to retain different environmental pollutants. This review aims to summarize recent advances in the application of hydrogels in the treatment of heavy metal-contaminated wastewater, particularly focusing on hydrogels based on cellulose and cellulose derivatives. The reported studies highlight how the adsorption properties of these materials can be widely modified, with a wide range of adsorption capacity for different heavy metal ions varying between 2.3 and 2240 mg/g. The possibility of developing new hydrogels with improved sorption performances is also discussed in the review, with the aim of improving their effective application in real scenarios, indicating future directions in the field.

Catalytic and biomedical applications of nanocelluloses: A review of recent developments

Nanocelluloses exhibit immense potential in catalytic and biomedical applications. Their unique properties, biocompatibility, and versatility make them valuable in various industries, contributing to advancements in environmental sustainability, catalysis, energy conversion, drug delivery, tissue engineering, biosensing/imaging, and wound healing/dressings. Nanocellulose-based catalysts can efficiently remove pollutants from contaminated environments, contributing to sustainable and cleaner ecosystems. These materials can also be utilized as drug carriers, enabling targeted and controlled drug release. Their high surface area allows for efficient loading of therapeutic agents, while their biodegradability ensures safer and gradual release within the body. These targeted drug delivery systems enhance the efficacy of treatments and minimizes side effects. Moreover, nanocelluloses can serve as scaffolds in tissue engineering due to their structural integrity and biocompatibility. They provide a three-dimensional framework for cell growth and tissue regeneration, promoting the development of functional and biologically relevant tissues. Nanocellulose-based dressings have shown great promise in wound healing and dressings. Their ability to absorb exudates, maintain a moist environment, and promote cell proliferation and migration accelerates the wound healing process. Herein, the recent advancements pertaining to the catalytic and biomedical applications of nanocelluloses and their composites are deliberated, focusing on important challenges, advantages, limitations, and future prospects.

Fabrication, Characterization, and Biological Evaluation of T. terrestris Incorporated Titanium-Doped ZnO/Cellulose Nanocomposite Films as a Therapeutic Hemostatic Scaffolds for Diabetic Wound Healing

The advent of biobased materials exhibiting remarkable effectiveness and performance has ushered in a paradigm shift in the field of biomedical science. Polymers are often used in the medical sector, particularly in the regeneration of bones, tissues, and wounds. Fast wound healing and self-healing polymers created from sustainable surroundings are attractive alternatives to create demand for new pathways in polymer research. This study investigates the efficacy of a biowaste-derived polymer, which was extracted and supplemented with titanium-doped ZnO nanoparticles along with medication in the form of an extract to evaluate its effectiveness in promoting wound healing. The prepared materials were further characterized using X-ray diffraction (XRD), UV-visible spectroscopy, Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), optical microscopy, atomic force microscopy (AFM), tensile, and its color parameters. In vitro studies on wound healing were also conducted. The results clearly showed that the produced substance possesses properties that are noteworthy for wound healing.

Cellulose Nanocrystals Show Anti-Adherent and Anti-Biofilm Properties against Oral Microorganisms

Cellulose nanocrystals (CNCs) are cellulose-derived nanomaterials that can be easily obtained, e.g., from vegetable waste produced by circular economies. They show promising antimicrobial activity and an absence of side effects and toxicity. This study investigated the ability of CNCs to reduce microbial adherence and biofilm formation using in vitro microbiological models reproducing the oral environment. Microbial adherence by microbial strains of oral interest, Streptococcus mutans and Candida albicans, was evaluated on the surfaces of salivary pellicle-coated enamel disks in the presence of different aqueous solutions of CNCs. The anti-biofilm activity of the same CNC solutions was tested against S. mutans and an oral microcosm model based on mixed plaque inoculum using a continuous-flow bioreactor. Results showed the excellent anti-adherent activity of the CNCs against the tested strains from the lowest concentration tested (0.032 wt. %, p < 0.001). Such activity was significantly higher against S. mutans than against C. albicans (p < 0.01), suggesting a selective anti-adherent activity against pathogenic strains. At the same time, there was a minimal, albeit significant, anti-biofilm activity (0.5 and 4 wt. % CNC solution for S. mutans and oral microcosm, respectively, p = 0.01). This makes CNCs particularly interesting as anticaries agents, encouraging their use in the oral field.

Co-delivery of siAEG-1 and doxorubicin to treat osteosarcoma via nanomicelles for azide-alkyne "click" conjugation of poly(l-lysine) dendrons onto Zein

Astrocyte elevated gene-1 (AEG-1) oncogene is a notorious and evolving target in a variety of human malignancies including osteosarcoma. The RNA interference (RNAi) has been clinically proven to effectively knock down specific genes. To successfully implement RNAi in vivo, protective vectors are required not only to protect unstable siRNAs from degradation, but also to deliver siRNAs to target cells with controlled release. Here, we synthesized a Zein-poly(l-lysine) dendrons non-viral modular system that enables efficient siRNA-targeted AEG-1 gene silencing in osteosarcoma and encapsulation of antitumor drugs for controlled release. The rational design of the ZDP integrates the non-ionic and low immunogenicity of Zein and the positive charge of the poly(l-lysine) dendrons (DPLL) to encapsulate siRNA and doxorubicin (DOX) payloads via electrostatic complexes and achieve pH-controlled release in a lysosomal acidic microenvironment. Nanocomplexes-directed delivery greatly improves siRNA stability, uptake, and AEG-1 sequence-specific knockdown in 143B cells, with transfection efficiencies comparable to those of commercial lipofectamine but with lower cytotoxicity. This AEG-1-focused RNAi therapy supplemented with chemotherapy inhibited, and was effective in inhibiting the growth in of osteosarcoma xenografts mouse models. The combination therapy is an alternative or combinatorial strategy that can produce durable inhibitory responses in osteosarcoma patients.

Fabrication and characterization of chitosan/anthocyanin intelligent packaging film fortified by cellulose nanocrystal for shrimp preservation and visual freshness monitoring

In this study, a multi-functional packaging film was fabricated, utilizing the natural polysaccharide chitosan (CS) as the base material, integrating natural blueberry anthocyanin (AN) as pH-responsive indicator, and reinforced with cellulose nanocrystals (CNCs). The implications of addition levels of CNCs on the characteristics of the films were systematically investigated, resulting in that CS-AN-CNCs 9 % film exhibited optimal performance. Specifically, the film showed a substantial enhancement in maximum tensile strength from 15 MPa to 35 MPa; On the other hand, the swelling degree properties, the oxygen permeability and water vapor permeability decreased from 159.2 % to 92.0 %, from 51.7 g/(m2d) to 12.2 g/(m2d), from 31.6 × 10-12 g/(m·s·Pa) to 1.6 × 10-12 g/(m·s·Pa), respectively. Moreover, the CS-AN-CNCs 9 % film exhibited antioxidant, antibacterial, coupled with a color metrically responsive to pH variations, displaying great potential in indicating the shrimp freshness and delaying spoilage. Another notable advantage of the-prepared packaging material lies in its completely biodegradability, therefore meeting the requirement of environmental protection. Therefore, the prepared CS-AN-CNCs film as an intelligent packaging solution with potential applications in food preservation and freshness monitoring applications.

Stimuli-responsive thin film composites of conducting polymers and cellulose nanocrystals for tissue engineering

Thin composite films comprising two primary representatives of conducting polymers, poly(3, 4-ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy), with eco-friendly cellulose nanocrystals (CNC) were prepared through electrochemical polymerization. The combination of CNC and PEDOT (or PPy) results in the formation of films with highly different surface topography and thickness. Intriguingly, different surface conductivity of PEDOT and PPy was revealed by atomic force microscopy albeit that the electrochemical properties were rather similar. The biological properties of the composites in contact with prospective human induced pluripotent stem cells (hiPSC) and cardiomyocytes derived from hiPSC demonstrated good cytocompatibility of both composites and their potential in engineering of electro-sensitive tissues. The as-prepared conducting, eco-friendly and cytocompatible composites are thus promising candidates for biomedical applications where stimuli-responsivity is a crucial cell-instructive property.

Development of hybrid biomicroparticles: cellulose exposing functionalized fusion proteins

BACKGROUND

One of the leading current trends in technology is the miniaturization of devices to the microscale and nanoscale. The highly advanced approaches are based on biological systems, subjected to bioengineering using chemical, enzymatic and recombinant methods. Here we have utilised the biological affinity towards cellulose of the cellulose binding domain (CBD) fused with recombinant proteins.

RESULTS

Here we focused on fusions with 'artificial', concatemeric proteins with preprogrammed functions, constructed using DNA FACE™ technology. Such CBD fusions can be efficiently attached to micro-/nanocellulose to form functional, hybrid bionanoparticles. Microcellulose (MCC) particles were generated by a novel approach to enzymatic hydrolysis using Aspergillus sp. cellulase. The interaction between the constructs components - MCC, CBD and fused concatemeric proteins - was evaluated. Obtaining of hybrid biomicroparticles of a natural cellulose biocarrier with proteins with therapeutic properties, fused with CBD, was confirmed. Further, biological tests on the hybrid bioMCC particles confirmed the lack of their cytotoxicity on 46BR.1 N fibroblasts and human adipose derived stem cells (ASCs). The XTT analysis showed a slight inhibition of the proliferation of 46BR.1 N fibroblasts and ACSs cells stimulated with the hybrid biomicroparticles. However, in both cases no changes in the morphology of the examined cells after incubation with the hybrid biomicroparticles' MCC were detected.

CONCLUSIONS

Microcellulose display with recombinant proteins involves utilizing cellulose, a natural polymer found in plants, as a platform for presenting or displaying proteins. This approach harnesses the structural properties of cellulose to express or exhibit various recombinant proteins on its surface. It offers a novel method for protein expression, presentation, or immobilization, enabling various applications in biotechnology, biomedicine, and other fields. Microcellulose shows promise in biomedical fields for wound healing materials, drug delivery systems, tissue engineering scaffolds, and as a component in bio-sensors due to its biocompatibility and structural properties.

Pulp cellulose-based core-sheath structure based on hyperbranched grafting strategy for development of reinforced soybean adhesive

Formaldehyde adhesive is the primary source of indoor formaldehyde pollution, posing a serious threat to human health. Soybean meal (SM), as an abundant biomacromolecule and co-product of soybean oil industry, emerges as a promising alternative to formaldehyde adhesive. However, the SM adhesive exhibits inferior water resistance and unsatisfactory bonding strength. In this study, a novel core-sheath structure with an inexpensive pulp cellulose core and a hyperbranched polymer sheath is synthesized and introduced into SM to develop a robust bio-based adhesive. Specifically, aldehyde-functionalized pulp cellulose is grafted with hyperbranched polyamide, which is terminated via epoxy groups, to synthesize a core-sheath hybrid (APC@HBPA-EP). The core-sheath APC@HBPA-EP serves as both a crosslinker and an enhancer. The results show that the wet shear strength of the modified SM adhesive exhibits a remarkable 520 % increase to 0.93 MPa, and its dry shear strength reaches 2.10 MPa, meeting the established indoor use standards. The Young's modulus of the modified SM adhesive shows a significant 282 % increase to 19.27 GPa. Additionally, the modified SM adhesive exhibited superior impact toughness (7.48 KJ/m2), which increased by 24 times compared with pure SM adhesive. This study provides a versatile strategy for developing robust protein adhesives, hydrogel patch, and composite coatings.

Wholly sustainable graft copolymers derived from cellulose, lignin, and hemicellulose for high-performance elastomers, adhesives, and UV-blocking materials

Sustainable elastomers derived from renewable biobased resources with excellent mechanical properties and varied functions are highly pursued to substitute traditional petroleum-based polymers yet challenging due to their limited macroscopic performance. In this work, we designed a series of wholly biobased cellulose-graft-poly(vanillin acrylate-co-tetrahydrofurfuryl acrylate) (Cell-g-P(VA-co-THFA) copolymer elastomers with cellulose as the rigid backbone, sustainable VA derived from lignin and soft THFA derived from hemicellulose as the hard and soft segments in the rubbery side chains. Moreover, the grafted side chains can be cross-linked to introduce an additional dynamic network structure via Schiff-base chemistry between the aldehyde and amino groups. The mechanical properties of Cell-g-P(VA-co-THFA) copolymer elastomers, including tensile strength, extensibility, elasticity, and toughness can be facilely manipulated by the VA/THFA feed ratio, cellulose content, and cross-linking density. These Cell-g-P(VA-co-THFA) copolymer elastomers are thermally stable and possess outstanding adhesion behavior and prominent UV-shielding performance. Besides dramatically enhanced mechanical properties, the cross-linked Cell-g-P(VA-co-THFA) counterparts exhibit remarkable shape memory behavior. This work provides a robust and convenient strategy for developing strong and versatile sustainable elastomers with different application demands by integrating different biomass feedstocks via elaborate molecular design.

Yield stress analysis of cellulose nanocrystals (CNCs) in hyaluronic acid suspensions

Due to their biodegradability features, cellulose nanocrystals (CNCs) and hyaluronic acid (HA) have been simultaneously used in the matrix of hydrogels for biomedical applications, such as corneal transplantation, and skin regeneration. Although rheology of these hydrogels may provide useful information for their applications, little to no attention has been paid to rheological characterization. In this study, we analyzed the rheology of HA-CNC suspensions and more specifically their yielding behavior. Through different rheological experiments, known as stress ramp, shear rate ramp and amplitude sweep; it was observed that HA-CNC gels possessed two yield points. Reproducible magnitudes of yield stress were obtained by optimizing the experimental conditions. The rheo-optics characterizations confirmed that the first and second yield points could be attributed to the bond and cage breakage phenomena. Studying the effect of concentration, the second yield stress increased linearly by CNC concentration, whereas the first yield point manifested a power-law dependence on concentration (exponent of 0.5). This power-law relationship was further justified by the evolution of average distance between the CNC individual particles (d), calculated through SAXS analysis.

Recent Advances in Flexible CNC-Based Chiral Nematic Film Materials

Cellulose nanocrystal (CNC) is a renewable resource derived from lignocellulosic materials, known for its optical permeability, biocompatibility, and unique self-assembly properties. Recent years have seen great progresses in cellulose nanocrystal-based chiral photonic materials. However, due to its inherent brittleness, cellulose nanocrystal shows limitations in the fields of flexible materials, optical sensors and food freshness testing. In order to solve the above limitations, attempts have been made to improve the flexibility of cellulose nanocrystal materials without destroying their structural color. Despite these progresses, a systematic review on them is lacking. This review aims to fill this gap by providing an overview of the main strategies and the latest research findings on the flexibilization of cellulose nanocrystal-based chiral nematic film materials (FCNM). Specifically, typical substances and methods used for their preparation are summarized. Moreover, different kinds of cellulose nanocrystal-based composites are compared in terms of flexibility. Finally, potential applications and future challenges of flexible cellulose nanocrystal-based chiral nematic materials are discussed, inspiring further research in this field.

Exploring nanocellulose frontiers: A comprehensive review of its extraction, properties, and pioneering applications in the automotive and biomedical industries

Material is an inseparable entity for humans to serve different purposes. However, synthetic polymers represent a major category of anthropogenic pollutants with detrimental impacts on natural ecosystems. This escalating environmental issue is characterized by the accumulation of non-biodegradable plastic materials, which pose serious threats to the health of our planet's ecosystem. Cellulose is becoming a focal point for many researchers due to its high availability. It has been used to serve various purposes. Recent scientific advancements have unveiled innovative prospects for the utilization of nanocellulose within the area of advanced science. This comprehensive review investigates deeply into the field of nanocellulose, explaining the methodologies employed in separating nanocellulose from cellulose. It also explains upon two intricately examined applications that emphasize the pivotal role of nanocellulose in nanocomposites. The initial instance pertains to the automotive sector, encompassing cutting-edge applications in electric vehicle (EV) batteries, while the second exemplifies the use of nanocellulose in the field of biomedical applications like otorhinolaryngology, ophthalmology, and wound dressing. This review aims to provide comprehensive information starting from the definitions, identifying the sources of the nanocellulose and its extraction, and ending with the recent applications in the emerging field such as energy storage and biomedical applications.

Multiple Natural Polymers in Drug and Gene Delivery Systems

Natural polymers are organic compounds produced by living organisms. In nature, they exist in three main forms, including proteins, polysaccharides, and nucleic acids. In recent years, with the continuous research on drug and gene delivery systems, scholars have found that natural polymers have promising applications in drug and gene delivery systems due to their excellent properties such as biocompatibility, biodegradability, low immunogenicity, and easy modification. However, since the structure, physicochemical properties, pharmacological properties and biological characteristics of biopolymer molecules have not yet been entirely understood, further studies are required before large-scale clinical application. This review focuses on recent advances in the representative natural polymers such as proteins (albumin, collagen, elastin), polysaccharides (chitosan, alginate, cellulose) and nucleic acids. We introduce the characteristics of various types of natural polymers, and further outline the characterization methods and delivery forms of these natural polymers. Finally, we discuss possible challenges for natural polymers in subsequent experimental studies and clinical applications. It provides an important strategy for the clinical application of natural polymers in drug and gene delivery systems.

Strong and flexible lignocellulosic film fabricated via a feasible molecular remodeling strategy

Biomass-derived sustainable film is a promising alternative to synthetic plastic, but hampered by strength, toughness and flexibility trade-off predicament. Here, a feasible and scalable strategy was proposed to fabricate strong and flexible lignocellulosic film through molecular reconstruction of cellulose and lignin. In this strategy, polyphenol lignin was absorbed and wrapped on the surface of cellulose fiber, forming strong interfacial adhesion and cohesion via intramolecular and intermolecular hydrogen bonding. Further, covalent ether bond was generated between the hydroxyl groups of lignocellulose to form chemical cross-linking network induced by epichlorohydrin (ECH). The synergistic effect of hydrogen bonding and stable chemical cross-linking enabled the resultant lignocellulosic film (ELCF) with outstanding mechanical strength of 132.48 MPa, the elongation at break of 9.77 %, and toughness of 9.77 MJ·m-3. Notably, the integration of polyphenol lignin synergistically improved the thermal stability, water resistance, UV-blocking performances of ELCF. Importantly, after immersion for 30 d, ELCF still possessed high wet strength of 70.38 MPa, and elongation at break of 7.70 %, suggesting excellent and durable mechanical performances. Moreover, ELCF could be biodegraded in the natural soil. Therefore, this study provides a new and versatile approach to reconstruct highly-performance lignocellulosic films coupling strength, toughness with flexibility for promising plastic replacement.

Electrospun Cellulose Nanocrystals Reinforced Flexible Sensing Paper for Triboelectric Energy Harvesting and Dynamic Self-Powered Tactile Perception

The technical synergy between flexible sensing paper and triboelectric nanogenerator (TENG) in the next stage of artificial intelligence Internet of Things engineering makes the development of intelligent sensing paper with triboelectric function very attractive. Therefore, it is extremely urgent to explore functional papers that are more suitable for triboelectric sensing. Here, a cellulose nanocrystals (CNCs) reinforced PVDF hybrid paper (CPHP) is developed by electrospinning technology. Benefitting from the unique effects of CNCs, CPHP forms a solid cross-linked network among fibers and obtains a high-strength (25 MPa) paper-like state and high surface roughness. Meanwhile, CNCs also improve the triboelectrification effect of CPHP by assisting the PVDF matrix to form more electroactive phases (96% share) and a higher relative permittivity (17.9). The CPHP-based TENG with single electrode configuration demonstrates good output performance (open-circuit voltage of 116 V, short-circuit current of 2.2 µA and power density of 91 mW m-2 ) and ultrahigh pressure-sensitivity response (3.95 mV Pa-1 ), which endows CPHP with reliable power supply and sensing capability. More importantly, the CPHP-based flexible self-powered tactile sensor with TENG array exhibits multifunctional applications in imitation Morse code compilation, tactile track recognition, and game character control, showing great prospects in the intelligent inductive device and human-machine interaction.

Synthesis, Properties, Applications, and Future Prospective of Cellulose Nanocrystals

The exploration of nanocellulose has been aided by rapid nanotechnology and material science breakthroughs, resulting in their emergence as desired biomaterials. Nanocellulose has been thoroughly studied in various disciplines, including renewable energy, electronics, environment, food production, biomedicine, healthcare, and so on. Cellulose nanocrystal (CNC) is a part of the organic crystallization of macromolecular compounds found in bacteria's capsular polysaccharides and plant fibers. Owing to numerous reactive chemical groups on its surface, physical adsorption, surface grating, and chemical vapor deposition can all be used to increase its performance, which is the key reason for its wide range of applications. Cellulose nanocrystals (CNCs) have much potential as suitable matrices and advanced materials, and they have been utilized so far, both in terms of modifying and inventing uses for them. This work reviews CNC's synthesis, properties and various industrial applications. This review has also discussed the widespread applications of CNC as sensor, acoustic insulator, and fire retardant material.

Direct and Indirect Cationization of Cellulose Nanocrystals: Structure-Properties Relationship and Virus Capture Activity

Due to increasing public concern over hygiene, there have been many studies investigating antimicrobial and antiviral agents recently. With the aim of developing biobased virucidal/virus capture agents, we report a chemical modification of the cellulose nanocrystals (CNCs) surface with poly(2-dimethylamino) ethyl acrylate) methyl chloride quaternary salt (Q-PDMAEA) to introduce the positively charged functional groups. The surface of CNCs was modified through direct and indirect graft polymerization. Subsequently, the direct and indirect cationization effect on the degree of functionalization, thermal stability, crystallinity, and antiviral activity of CNCs was investigated. Indirect cationization produced the highest degree of polymer grafting, increasing particle size and thermal stability. Further, the modified CNCs were tested for their ability to capture nonenveloped bacteriophages PhiX174 (ΦX174) and MS2. We observed a significant (>4.19 log10) reduction in total viral load by specific functionalized CNCs. However, the activity depended on the structure of functional groups, surface charge density, and the type of virus under study. Overall, the direct and indirect cationization of CNC leads to biobased agents with immobilized cationic charge, with good virus capture activity. Such agents can be used for various applications including textiles, packaging, wastewater treatment, etc.

3D-Printed Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-Cellulose-Based Scaffolds for Biomedical Applications

While biomaterials have become indispensable for a wide range of tissue repair strategies, second removal procedures oftentimes needed in the case of non-bio-based and non-bioresorbable scaffolds are associated with significant drawbacks not only for the patient, including the risk of infection, impaired healing, or tissue damage, but also for the healthcare system in terms of cost and resources. New biopolymers are increasingly being investigated in the field of tissue regeneration, but their widespread use is still hampered by limitations regarding mechanical, biological, and functional performance when compared to traditional materials. Therefore, a common strategy to tune and broaden the final properties of biopolymers is through the effect of different reinforcing agents. This research work focused on the fabrication and characterization of a bio-based and bioresorbable composite material obtained by compounding a poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) matrix with acetylated cellulose nanocrystals (CNCs). The developed biocomposite was further processed to obtain three-dimensional scaffolds by additive manufacturing (AM). The 3D printability of the PHBH-CNC biocomposites was demonstrated by realizing different scaffold geometries, and the results of in vitro cell viability studies provided a clear indication of the cytocompatibility of the biocomposites. Moreover, the CNC content proved to be an important parameter in tuning the different functional properties of the scaffolds. It was demonstrated that the water affinity, surface roughness, and in vitro degradability rate of biocomposites increase with increasing CNC content. Therefore, this tailoring effect of CNC can expand the potential field of use of the PHBH biopolymer, making it an attractive candidate for a variety of tissue engineering applications.

Recent advances in cellulose nanocrystals-based antimicrobial agents

Over the past five years, there has been growing interest in the design of modified cellulose nanocrystals (CNCs) as nanoscale antimicrobial agents in potential end-user applications such as food preservation/packaging, additive manufacturing, biomedical and water purification. The interest of applying CNCs-based antimicrobial agents arise due to their abilities to be derived from renewable bioresources and their excellent physicochemical properties including rod-like morphologies, large specific surface area, low toxicity, biocompatibility, biodegradability and sustainability. The presence of ample surface hydroxyl groups further allows easy chemical surface modifications for the design of advanced functional CNCs-based antimicrobial materials. Furthermore, CNCs are used to support antimicrobial agents that are subjected to instability issues. The current review summarizes recent progress in CNC-inorganic hybrid-based materials (Ag and Zn nanoparticles, other metal/metal oxide) and CNC-organic hybrid-based materials (polymers, chitosan, simple organic molecules). It focuses on their design, syntheses and applications with a brief discussion on their probable modes of antimicrobial action whereby the roles of CNCs and/or the antimicrobial agents are highlighted.

Biopolymer-Based Nanosystems: Potential Novel Carriers for Kidney Drug Delivery

Kidney disease has become a serious public health problem throughout the world, and its treatment and management constitute a huge global economic burden. Currently, the main clinical treatments are not sufficient to cure kidney diseases. During its development, nanotechnology has shown unprecedented potential for application to kidney diseases. However, nanotechnology has disadvantages such as high cost and poor bioavailability. In contrast, biopolymers are not only widely available but also highly bioavailable. Therefore, biopolymer-based nanosystems offer new promising solutions for the treatment of kidney diseases. This paper reviews the biopolymer-based nanosystems that have been used for renal diseases and describes strategies for the specific, targeted delivery of drugs to the kidney as well as the physicochemical properties of the nanoparticles that affect the targeting success.

Wound Dressing Double-Crosslinked Quick Self-Healing Hydrogel Based on Carboxymethyl Chitosan and Modified Nanocellulose

The use of hydrogels in wound dressings, which is pivotal for effective wound treatment, has been widely applied to diverse medical wound conditions. However, formulating natural hydrogels that combine robust strength and self-healing capabilities is a significant challenge. To overcome this, we successfully designed a natural nanocellulose self-healing hydrogel that can quickly self-heal and restore the complete hydrogel structure after injury to fill the injured area and protect the wound from external damage. Our study utilized modified natural polymer carboxymethyl chitosan (CMC), hydrazide-modified carboxymethyl cellulose nanofibers (HCNF), and cellulose nanocrystals modified by dialdehyde (DACNC) to fabricate the hydrogel. The amides containing more amino groups and HCNF in CMC can be used as cross-linking nodes, and the high aspect ratio and specific surface area of DACNC are favorable for the connection of many active hydrogels. The hydrogel is crosslinked by the dynamic imide bond and hydrazone bond between the amino group of CMC, the amide of HCNF, and the aldehyde of DACNC and has a double network structure. These connections can be readily reassembled when disrupted, enabling fast self-healing of hydrogels within five minutes. Moreover, HCNF and DACNC were incorporated as nano-reinforced fillers to bolster the hydrogel's strength while preserving its high liquid absorption capacity (381% equilibrium swelling rate).

An updated review on oral protein-based antigen vaccines efficiency and delivery approaches: a special attention to infectious diseases

Various infectious agents affect human health via the oral entrance. The majority of pathogens lack approved vaccines. Oral vaccination is a convenient, safe and cost-effective approach with the potential of provoking mucosal and systemic immunity and maintaining individual satisfaction. However, vaccines should overcome the intricate environment of the gastrointestinal tract (GIT). Oral protein-based antigen vaccines (OPAVs) are easier to administer than injectable vaccines and do not require trained healthcare professionals. Additionally, the risk of needle-related injuries, pain, and discomfort is eliminated. However, OPAVs stability at environmental and GIT conditions should be considered to enhance their stability and facilitate their transport and storage. These vaccines elicit the local immunity, protecting GIT, genital tract and respiratory epithelial surfaces, where numerous pathogens penetrate the body. OPAVs can also be manipulated (such as using specific incorporated ligand and receptors) to elicit targeted immune response. However, low bioavailability of OPAVs necessitates development of proper protein carriers and formulations to enhance their stability and efficacy. There are several strategies to improve their efficacy or protective effects, such as incorporation of adjuvants, enzyme inhibitors, mucoadhesive or penetrating devices and permeation enhancers. Hence, efficient delivery of OPAVs into GIT require proper delivery systems mainly including smart target systems, probiotics, muco-adhesive carriers, lipid- and plant-based delivery systems and nano- and microparticles.

Cellulose Nanocrystal (CNC) Gels: A Review

The aim of this article is to review the research conducted in the field of aqueous and polymer composites cellulose nanocrystal (CNC) gels. The experimental techniques employed to characterize the rheological behavior of these materials will be summarized, and the main advantages of using CNC gels will also be addressed in this review. In addition, research devoted to the use of numerical simulation methodologies to describe the production of CNC-based materials, e.g., in 3D printing, is also discussed. Finally, this paper also discusses the application of CNC gels along with additives such as cross-linking agents, which can represent an enormous opportunity to develop improved materials for manufacturing processes.

An introductory review on advanced multifunctional materials

This review summarizes the applications of some of the advanced materials. It included the synthesis of several nanoparticles such as metal oxide nanoparticles (e.g., Fe₃O₄, ZnO, ZrOSO₄, MoO_3-x, CuO, AgFeO₂, Co₃O₄, CeO₂, SiO₂, and CuFeO₂); metal hydroxide nanosheets (e.g., Zn₅(OH)₈(NO₃)₂·2H₂O, Zn(OH)(NO₃)·H₂O, and Zn₅(OH)₈(NO₃)₂); metallic nanoparticles (Ag, Au, Pd, and Pt); carbon-based nanomaterials (graphene, graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and carbon dots (CDs)); biopolymers (cellulose, nanocellulose, TEMPO-oxidized cellulose nanofibers (TOCNFs), and chitosan); organic polymers (e.g. covalent-organic frameworks (COFs)); and hybrid materials (e.g. metal-organic frameworks (MOFs)). Most of these materials were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing, biosensing, cancer therapy, and drug delivery). They can be used as efficient adsorbents and catalysts to remove emerging contaminants e.g., inorganic (i.e., heavy metals) and organic (e.g., dyes, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation reactions such as redox reactions of pollutants. They can be used as filters for air purification by capturing carbon dioxide (CO₂) and volatile organic compounds (VOCs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH₄. Nanomedicine for some of these materials was also included being an effective agent as an antibacterial, nanocarrier for drug delivery, and probe for biosensing.

Development and Characterization of a 96-Well Exposure System for Safety Assessment of Nanomaterials

In this study, a 96-well exposure system for safety assessment of nanomaterials is developed and characterized using an air-liquid interface lung epithelial model. This system is designed for sequential nebulization. Distribution studies verify the reproducible distribution over all 96 wells, with lower insert-to-insert variability compared to non-sequential application. With a first set of chemicals (TritonX), drugs (Bortezomib), and nanomaterials (silver nanoparticles and (non-)fluorescent crystalline nanocellulose), sequential exposure studies are performed with human lung epithelial cells followed by quantification of the deposited mass and of cell viability. The developed exposure system offers for the first time the possibility of exposing an air-liquid interface model in a 96-well format, resulting in high-throughput rates, combined with the feature for sequential dosing. This exposure system allows the possibility of creating dose-response curves resulting in the generation of more reliable cell-based assay data for many types of applications, such as safety analysis. In addition to chemicals and drugs, nanomaterials with spherical shapes, but also morphologically more complex nanostructures can be exposed sequentially with high efficiency. This allows new perspectives on in vivo-like and animal-free approaches for chemical and pharmaceutical safety assessment, in line with the 3R principle of replacing and reducing animal experiments.

A Critical Review on Classified Excipient Sodium-Alginate-Based Hydrogels: Modification, Characterization, and Application in Soft Tissue Engineering

Alginates are polysaccharides that are produced naturally and can be isolated from brown sea algae and bacteria. Sodium alginate (SA) is utilized extensively in the field of biological soft tissue repair and regeneration owing to its low cost, high biological compatibility, and quick and moderate crosslinking. In addition to their high printability, SA hydrogels have found growing popularity in tissue engineering, particularly due to the advent of 3D bioprinting. There is a developing curiosity in tissue engineering with SA-based composite hydrogels and their potential for further improvement in terms of material modification, the molding process, and their application. This has resulted in numerous productive outcomes. The use of 3D scaffolds for growing cells and tissues in tissue engineering and 3D cell culture is an innovative technique for developing in vitro culture models that mimic the in vivo environment. Especially compared to in vivo models, in vitro models were more ethical and cost-effective, and they stimulate tissue growth. This article discusses the use of sodium alginate (SA) in tissue engineering, focusing on SA modification techniques and providing a comparative examination of the properties of several SA-based hydrogels. This review also covers hydrogel preparation techniques, and a catalogue of patents covering different hydrogel formulations is also discussed. Finally, SA-based hydrogel applications and future research areas concerning SA-based hydrogels in tissue engineering were examined.

Cellulose nanocrystalline from biomass wastes: An overview of extraction, functionalization and applications in drug delivery

Cellulose nanocrystals (CNC) have been extensively used in various fields due to their renewability, excellent biocompatibility, large specific surface area, and high tensile strength. Most biomass wastes contain significant amounts of cellulose, which forms the basis of CNC. Biomass wastes are generally made up of agricultural waste, and forest residues, etc. CNC can be produced from biomass wastes by removing the non-cellulosic components through acid hydrolysis, enzymatic hydrolysis, oxidation hydrolysis, and other mechanical methods. However, biomass wastes are generally disposed of or burned in a random manner, resulting in adverse environmental consequences. Hence, using biomass wastes to develop CNC-based carrier materials is an effective strategy to promote the high value-added application of biomass wastes. This review summarizes the advantages of CNC applications, the extraction process, and recent advances in CNC-based composites, such as aerogels, hydrogels, films, and metal complexes. Furthermore, the drug release characteristics of CNC-based material are discussed in detail. Additionally, we discuss some gaps in our understanding of the current state of knowledge and potential future directions of CNC-based materials.

Recent Development of Nanomaterials for Transdermal Drug Delivery

Nano-engineered medical products first appeared in the last decade. The current research in this area focuses on developing safe drugs with minimal adverse effects associated with the pharmacologically active cargo. Transdermal drug delivery, an alternative to oral administration, offers patient convenience, avoids first-pass hepatic metabolism, provides local targeting, and reduces effective drug toxicities. Nanomaterials provide alternatives to conventional transdermal drug delivery including patches, gels, sprays, and lotions, but it is crucial to understand the transport mechanisms involved. This article reviews the recent research trends in transdermal drug delivery and emphasizes the mechanisms and nano-formulations currently in vogue.

Polyurethane films formation from microcrystalline cellulose as a polyol and cellulose nanocrystals as additive: Reactions favored by the low viscosity of the source of isocyanate groups used

To simultaneously form films while synthesizing solvent-free and catalyst-free bio-based polyurethanes, hexamethylene diisocyanate trimer was selected as an isocyanate group source to produce a low-viscosity reaction medium for dispersing high contents of microcrystalline cellulose (MCC, polyol) and cellulose nanocrystals (CNC). Castor oil was used as an additional polyol source. Up to 80 % of the MCC was dispersed, producing a film exhibiting the highest T_g (72 °C), tensile strength (18 MPa), and Young's modulus (522.4 MPa). 12.5 % (30 % MCC) and 7.5 % (50 % MCC) of CNC dispersed in the reaction medium formed films stiffer than their counterparts. All the films exhibited transparency and high crystallinity. The contact angle/zeta potential (ζ) indicated hydrophobic film surfaces. At pH 7.4, ζ suggested that the films interacted with physiological fluids favorably. The films were non-cytotoxic, and the composites exhibited cell growth compared with the control. The reported results, as far as it is known, are unprecedented.

Antibody Immobilization on Sulfated Cellulose Nanocrystals

Exploiting cellulose nanocrystals' high aspect ratio and tailorable surface for immunological biosensors has been hindered by the relatively limited research on using commonly available sulfated cellulose nanocrystals (CNCs) for antibody immobilization and by the low hydrolytic stability of dried assemblies produced from sulfated CNCs. Herein, we report a reaction scheme that enables both hydrolytic stability and antibody immobilization through 3-aminopropyl-triethoxysilane and glutaric anhydride chemistry. Immobilization was demonstrated using three model antibodies used in the detection of the cancer biomarkers: alpha-fetoprotein, prostate-specific antigen, and carcinoembryonic antigen. Thermogravimetric analysis coupled with Fourier-transform infrared spectroscopy provided evidence of CNC modification. Quartz crystal microbalance with dissipation monitoring was used to monitor binding during each step of the immobilization scheme as well as binding of the corresponding antigens. The general reaction scheme was tested using both aqueous CNC dispersions and CNC films. Film modification is slightly simpler as it avoids centrifugation and washing steps. However, modifying the dispersed CNCs provides access to their entire surface area and results in a greater capacity for antigen binding.

Impact of counterion valency on the rheology of sulfonated cellulose nanocrystal hydrogels

A systematic rheological study on the influence of valency of different counterions on the properties of CNC hydrogels was carried out. Rheo-polarized microscopy was used to prove that preshear of 500 s^-1 for 1 min is adequate to completely breakdown agglomerates in the suspension. Furthermore, a rest period of 30 min is sufficient to recover the equilibrium structure of hydrogels. Changing counterions from monovalent (Na⁺, K⁺, Li⁺), to divalent (Mg²⁺, Ca²⁺) and to trivalent (Al³⁺) influenced the network formation. CNC suspensions with monovalent counterions are isotropic at 3 wt%, anisotropic with chiral nematic structures at 5 wt% and form birefringent gels at 7 wt%. Conversely, divalent and trivalent counterions facilitate network formation, leading to gel like behavior at all concentrations. Sonication of CNC samples with monovalent counterions lowers the viscosity by two orders of magnitude while the opposite is true for multivalent counterions due to the formation of strong networks. The varying rheological properties displayed from CNCs with different counter ions may influence the use of CNC as rheological modifiers in fluid-based applications.

Enhancing the solubility and antimicrobial activity of cellulose through esterification modification using amino acid hydrochlorides

Most amino acid molecules have good water solubility and are rich in functional groups, which makes them a promising derivatizing agent for cellulose. However, self-condensation of amino acids and low reaction efficiency always happen during esterification. Here, amino acid hydrochloride ([AA]Cl) is selected as raw material to synthesize cellulose amino acid ester (CAE). Based on TG-MS coupling technology, a significantly faster reaction rate of [AA]Cl compared to raw amino acid can be observed visually. CAE with the degree of substitution 0.412-0.516 is facilely synthesized under 130-170 °C for 10-50 min. Moreover, the effects of amounts of [AA]Cl agent, temperature, and time on the esterification are studied. The CAE can be well dissolved in 7 wt% NaOH aq., resulting in a 7.5 wt% dope. The rheological test of the dope demonstrated a shear-thinning behavior for Newtonian-like fluid, and a high gel temperature (41.7 °C). Further, the synthesized products show distinct antibacterial activity and the bacteriostatic reduction rate against E. coli can reach 99.5 %.

Modifications of cellulose-based biomaterials for biomedical applications

Cellulose is one of the most abundant organic compounds in nature and is available from diverse sources. Cellulose features tunable properties, making it a promising substrate for biomaterial development. In this review, we highlight advances in the physical processes and chemical modifications of cellulose that enhance its properties for use as a biomaterial. Three cellulosic products are discussed, including nanofibrillated, nanocrystalline, and bacterial cellulose, with a focus on how each may serve as a platform for the development of advanced cellulose-based biomaterials for Biomedical applications. In addition to associating mechanical and chemical properties of cellulosic materials to specific applications, a prospectus is offered for the future development of cellulose-based biomaterials for biomedicine.

Nanotechnology for research and treatment of the intestine

The establishment of intestinal in vitro models is crucial for elucidating intestinal cell-microbe intrinsic connections and interaction mechanisms to advance normalized intestinal diagnosis and precision therapy. This review discusses the application of nanomaterials in mucosal therapy and mechanism research in combination with the study of nanoscaffold in vitro models of the gut. By reviewing the original properties of nanomaterials synthesized by different physicochemical principles and modifying the original properties, the contribution of nanomaterials to solving the problems of short survival period, low cell differentiation rate, and poor reduction ability in traditional intestinal models is explored. According to nanomaterials’ different diagnostic mediators and therapeutic targets, the current diagnostic principles in inflammatory bowel disease, intestinal cancer, and other diseases are summarized inductively. In addition, the mechanism of action of nanomedicines in repairing mucosa, inhibiting inflammation, and alleviating the disease process is also discussed. Through such systematic elaboration, it offers a basis for nanomaterials to help advance in vitro research on the intestine and provide precision treatments in the clinic.

Cellulose Nanocrystals-Incorporated Thermosensitive Hydrogel for Controlled Release, 3D Printing, and Breast Cancer Treatment Applications

In situ-gel-forming thermoresponsive copolymers have been widely exploited in controlled delivery applications because their critical gel temperature is similar to human body temperature. However, there are limitations to controlling the delivery of biologics from a hydrogel network because of the poor networking and reinforcement between the copolymer networks. This study developed an in situ-forming robust injectable and 3D printable hydrogel network based on cellulose nanocrystals (CNCs) incorporated amphiphilic copolymers, poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide (PCLA). In addition, the physicochemical and mechanical properties of injectable hydrogels were controlled by physically incorporating CNCs with amphiphilic PCLA copolymers. CNCs played an unprecedented role in physically reinforcing the PCLA copolymers' micelle network via intermicellar bridges. Apart from that, the free-flowing closely packed rod-like CNCs incorporated PCLA micelle networks at low temperature transformed to a stable viscoelastic hydrogel network at physiological temperature. CNC incorporated PCLA copolymer sols effectively coordinated with hydrophobic doxorubicin and water-soluble lysozyme by a combination of hydrophobic and hydrogen bonding interaction and controlled the release of biologics. As shown by the 3D printing results, the biocompatible PCLA hydrogels continuously extruded during printing had good injectability and maintained high shape fidelity after printing without any secondary cross-linking steps. The interlayer bonding between the printed layers was high and formed stable 3D structures up to 10 layers. Subcutaneous injection of free-flowing CNC incorporated PCLA copolymer sols to BALB/c mice formed a hydrogel instantly and showed controlled biodegradation of the hydrogel depot without induction of toxicity at the implantation sites or surrounding tissues. At the same time, the in vivo antitumor effect on the MDA-MB-231 tumor xenograft model demonstrated that DOX-loaded hydrogel formulation significantly inhibited the tumor growth. In summary, the CNC incorporated biodegradable hydrogels developed in this study exhibit a prolonged release with special release kinetics for hydrophobic and hydrophilic biologics.

Copolymer-Functionalized Cellulose Nanocrystals as a pH- and NIR-Triggered Drug Carrier for Simultaneous Photothermal Therapy and Chemotherapy of Cancer Cells

As a class of biocompatible and biodegradable naturally derived nanomaterials, cellulose nanocrystals (CNCs) with diverse surface functionalization have aroused considerable attention for a range of biomedical applications in drug or gene delivery, as a fluorescent nanoprobe, in cancer targeting, and in photothermal cancer therapy, among others. Herein, we construct the copolymer-functionalized CNCs as a pH- and near-infrared (NIR)-triggered drug carrier for simultaneous photothermal therapy and chemotherapy of cancer cells. Poly(ε-caprolactone)-b-poly(2-(dimethylamino)ethyl methacrylate) (PCL-b-PDMAEMA) was conjugated onto the surface of CNCs through ring-opening polymerization, followed by activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP). The resultant CNC-based drug carrier can encapsulate doxorubicin (DOX) as a therapeutic agent and indocyanine green (ICG) as an NIR dye in the PCL core and the PDMAEMA shell, respectively, via hydrophobic and electrostatic interactions. In addition to the intrinsic pH response, the release profile of DOX can also be controlled by the duration of laser irradiation due to collapse of the crystal structure of the PCL domain with the increase of temperature induced by photothermal conversion. The drug carrier can exhibit enhanced cytotoxicity toward HepG2, human hepatocyte carcinoma, cells upon laser irradiation, which can be attributed to the synergistic effect arising from NIR-triggered burst release of DOX and photothermal heating. The rod-like morphology of the CNC-based drug carrier may help accelerate the endocytosis in cell membranes compared with its common spherical counterpart. Based on the abovementioned advantages, copolymer-functionalized CNCs can serve as a promising candidate for effective cancer treatment.

Cellulose nanocrystals based delivery vehicles for anticancer agent curcumin

Cancer is a complex disease that starts with genetic alterations and mutations in healthy cells. The past decade has witnessed a huge demand for new biocompatibility and high-performance intelligent drug delivery systems. Curcumin (CUR) is a bioactive stimulant with numerous medical benefits. However, because of its hydrophobic nature, it has low bioavailability. The utilization of many biobased materials has been found to improve the loading of hydrophobic drugs. Cellulose nanocrystals (CNCs) with exceptional qualities and a wide range of applications, feature strong hydrophilicity and lipophilicity, great emulsification stability, high crystallinity and outstanding mechanical attributes. In this review, numerous CNCs-based composites have been evaluated for involvement in the controlled release of CUR. The first part of the review deals with recent advancements in the extraction of CNCs from lignocellulose biomass. The second elaborates some recent developments in the post-processing of CNCs in conjunction with other materials like natural polymers, synthetic polymers, β-CD, and surfactants for CUR loading/encapsulation and controlled release. Furthermore, numerous CUR drug delivery systems, challenges, and techniques for effective loading/encapsulation of CUR on CNCs-based composites have been presented. Finally, conclusions and future outlooks are also explored.

Intestinal-targeted nanotubes-in-microgels composite carriers for capsaicin delivery and their effect for alleviation of Salmonella induced enteritis

Salmonella is a word-wide food-borne pathogen, which can cause severe enteritis and intestinal microbiota imbalance. Capsaicin (Cap), a food-based bioactive ingredient, has antibacterial and anti-inflammatory properties. However, its low solubility, low bioavailability and the irritation to digestive tract greatly limit its applications. Here, an intestinal responsively "nanotubes-in-microgel" composite carrier was constructed by capturing α-lactalbumin (α-lac) nanotubes in low-methoxy pectin microgels (LMP-NT) (52 μm). Cap was loaded in such system via hydrophobic interaction with a loading capacity of 38.02 mg/g. The LMP microgels remained stable and protected NT/Cap from early releasing in the gastric condition. It showed an excellent mucoadhesive capacity, which can prolong the intestinal retention up to 12 h and control release NT/Cap in intestine. Afterward, NT/Cap could penetrate across the mucus layer deeply and enter the intestinal villi epithelial cells efficiently. LMP-NT microgels achieved a mucoadhesive-to-penetrating transition in response to intestinal pH, improving the epithelium absorption and the in vivo bioavailability of Cap. Oral administration of LMP-NT/Cap could effectively alleviate enteritis caused by Salmonella infection and maintain the homeostasis of gut microbiota. Overall, this work suggested that LMP-NT composite microgels were promising for intestine-targeted and oral delivery of hydrophobic bioactive food compounds.