Zeta potential as a tool for functional materials development

Unveiling the differences: A comprehensive multi-technique analysis of hard and soft nanoparticles

The characterization of nanoparticles (NPs) has become increasingly important due to their wide-ranging applications in fields such as biomedicine and drug delivery. NPs have emerged as promising candidates for drug delivery systems due to their unique physicochemical properties, which enable them to interact with biological systems at the molecular level. Among these, soft nanocarriers, such as niosomes, and hard nanocarriers, such as Iron Oxide Nanoparticles (IONPs), offer distinct advantages for targeted therapy and diagnostics. This study provides a comprehensive, multi-disciplinary evaluation of two distinct types of nanoparticles: soft nanocarriers (niosomes, NVs) and hard nanocarriers (IONPs), by examining their physicochemical properties, cellular uptake, and cytotoxicity profiles. This comparative analysis seeks to highlight the different behaviour of soft and hard nanoparticles in drug delivery applications, with a particular focus on the impact of surface modifications. The addition of chitosan to sample NVsB not only resulted in an increase in particle dimensions but also shifted the ζ-potential to positive values which could enhance the interactions with cell membranes, improving cellular uptake. As desired, the obtained ζ-potential value of NVsB-Chit was comparable to that of the commercial coated ferrofluid. In addition to the traditional characterization techniques, this study integrates advanced analytical methods, such as Atomic Force Microscopy (AFM), complementing traditional techniques such as Dynamic Light Scattering (DLS), to assess the nanoscale topography of both types of nanoparticles. Cytotoxicity studies on Calu-3 lung adenocarcinoma cells were conducted to evaluate the biocompatibility of the nanoparticles, demonstrating that NVs and FluidMAG exhibited minimal cytotoxic effects, particularly at lower concentrations. Cell internalization was confirmed for IONPs by magnetic cell separation whereas confocal microscopy analysis has been conducted for calcein-loaded NVs intracellular visualization. By integrating structural, chemical, and biological evaluations, we take an interdisciplinary approach which could also enable us to explore how variations in nanoparticle design (such as surface charge, size and coating) affect their performance in drug delivery and diagnostics. Moreover, combining physicochemical characterizations (e.g., hydrodynamic diameter, zeta potential and nanoparticles morphology) with biological evaluations (e.g., cellular uptake and safety profiles) allows for a holistic assessment of these nanocarriers to gain a comprehensive understanding of their behaviour and performance. This aspect is crucial for designing more efficient, safer, and targeted nanomedicines.

In chemico categorization of magnetite-, hydroxyapatite-, and Ag-derived hybrid nanobiomaterials based on the surface oxidative reactivity: implications of doping and coating

In chemico tests are important tools that complement in silico, in vitro and in vivo approaches to predict the toxicological impact of nanomaterials (NMs). Here, we apply a recently proposed in chemico methodology, based on the evaluation of the number, nature and properties of reactive surface sites of NMs, to a series of magnetite-, hydroxyapatite- and silver-based hybrid nanobiomaterials (NBMs). The properties of the NBMs were examined using methanol chemisorption followed by temperature-programmed surface reaction (MeOH-TPSR), dithiothreitol (DTT) oxidation, cyclic voltammetry in biologically relevant media, and electron paramagnetic resonance (EPR) spectroscopy in a series of relevant media as a spin trap. The resulting data were critically compared and correlated with the available in vitro data of the NBMs' hazard. Our findings reveal significant differences in the oxidative potential of these hybrid NBMs. Iron (Fe) doping in hydroxyapatite (HA) introduced new redox-active surface sites, leading to increased oxidative reactivity via ROS-independent mechanisms, as evidenced by higher DTT depletion and Fenton-like activity compared to HA. Conversely, titanium (Ti) doping modified HA's surface by introducing acidic active sites, reducing its oxidative capacity. Coating Fe3O4 with poly(ethylene glycol)-poly(lactic-co-glycolic) acid (PEG-PLGA) enhanced the oxidative reactivity without ROS generation, suggesting a surface-driven process. In contrast, hydroxyethyl cellulose (HEC) coating significantly reduced the high reactivity of uncoated silver (Ag). This study underscores the importance of determining the NBMs' reactivity profile for safe biomedical use, highlighting how specific coatings and dopants can transform oxidative surface properties.

A ROS-responsive, aptamer-targeted graphene oxide nanocomposite for site-specific glutathione release in cerebral ischemia-reperfusion injury

Cerebral ischemia-reperfusion (I/R) injury is a major contributor to mortality and long-term disability worldwide, primarily due to excessive reactive oxygen species (ROS) generation after blood flow is restored. Although current treatments focus on reestablishing perfusion, they offer limited protection against the secondary ROS-mediated injury. Here, we report a multifunctional nanocomposite-graphene oxide loaded with glutathione (GSH) and functionalized with a fibrinogen-targeting aptamer (GO@GSH-FA)-capable of selectively releasing antioxidant cargo within the ischemic brain microenvironment. Characterization revealed a drug-loading capacity of 17.59% ± 3.74% and an entrapment efficiency of 78.78% ± 4.55%, highlighting the robust loading of GSH. The ROS-sensitive borate ester linker ensures that GSH is preferentially liberated in oxidative stress regions, while the fibrinogen aptamer actively targets fibrin-rich thrombotic sites. In vitro, GO@GSH-FA significantly restored viability in oxygen-glucose-deprived SH-SY5Y cells (from 31% up to near control levels), reduced inflammatory cytokines, and lowered intracellular ROS. In a Endothelin-1 (ET-1) induced cortical ischemia model, GO@GSH-FA led to a marked decrease in neurological deficit scores (from 7.20 ± 1.16 to 4.20 ± 0.98) and enhanced neuronal survival relative to untreated animals. Collectively, these findings underscore the promise of GO@GSH-FA as a targeted, ROS-responsive platform for mitigating cerebral I/R injury.

"All-in-a-tube" detection of RDX and TNT: old silver mirror reaction revived for nitro-explosive quantification

Inspired by analyte-induced in situ formation/growth of silver nanoparticles (AgNPs), the traditional Tollens' reagent of diamminesilver(I) complex cation [Ag(NH3)2]+ was shown to be capable of detecting explosives. Thus, a color test based on in situ formation of AgNPs was developed for 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) and 2,4,6-trinitrotoluene (TNT). The resultant yellow-colored AgNPs were characterized using UV-visible spectrophotometry, scanning transmission electron microscopy, and dynamic light scattering measurements. The system displays turn-on absorbance behavior with RDX and TNT, yielding detection limits of 50.3 and 67.2 nmol L-1, respectively. The assay could distinguish between RDX and TNT using a simple extraction-based recovery procedure. Good recoveries for RDX and TNT were obtained from real (Composite B, Composite A5, and Octol) and synthetically prepared formulations. Method validation was performed by statistically comparing the analytical results obtained by the reference liquid chromatography-tandem mass spectrometric method applied to RDX standards and RDX-contaminated soil samples. As a novelty of this system, direct spectrophotometric detection of RDX through its decomposition product, formaldehyde, was successfully performed for the first time. Compared with the widely used indirect spectrophotometric methods based on nitrite formation from RDX degradation, the system is superior in that it does not require pre-hydrolysis of RDX and does not respond to 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane (HMX). It is also noteworthy that the system responds to TNT in a way that constitutes an innovative alternative to the existing mechanism of Meisenheimer/Janowsky complex formation in the literature.

Goat Skin (Capra aegagruss Erxleben, 1777): a Promising and Sustainable Source of Collagen

The aim of the study was to extract and characterize collagen from solid untanned skin waste from the processing of leather in a Capra aegagrus tannery. Using pepsin (SPC), 37 g of collagen were obtained from 100 g of dry weight skin. Characterization took place using SDS-PAGE, FTIR and UV absorption techniques, identifying it as type I collagen. The ultraviolet (UV) absorption spectrum showed a peak at 238 nm. In the thermogram, the maximum transition temperature was 56º C. Using the electrophoresis technique, it was observed that SPC consists of band patterns formed by a γ chain, a β chain and two distinct α chains (α1 and α2). In the FTIR analysis, the collagen showed the absorption peaks for the amides, showing that the SPC extraction process maintained the integrity of the molecule. To observe the effect of NaCl concentration on the solubility of SPC, the collagen showed high solubility, up to a concentration of 2% NaCl. The solubility peak was observed at pH 4.0, with a sharp drop until pH 7.0, reaching its minimum point at pH 10. Scanning microscopy showed some irregular surfaces, cavities and fibrous structures, which may favor the application of collagen as a biomaterial. The zeta potential found the isoelectric point of collagen at pH = 6.61. These results indicate that the collagen obtained has a high level of structural integrity and can be applied as an alternative source, as well as adding value to a waste product that is often discarded in the environment.

Bacterial responses to Ephedra aphylla stem extract and green-synthesized Ag-TiO2 and Ag-SeO2 core/shell nanocomposites: unveiling antimicrobial and antioxidant properties

This study reports an efficient and green protocol for the green synthesis of Ag-TiO2 and Ag-SeO2 nanocomposites using the extracted stems of Ephedra aphylla. Results of spectroscopic and analytical analyses confirmed the successful synthesis, stability, and crystalline nature of the nanomaterials. The phytochemical profile and antioxidant and antimicrobial activities of the E. aphylla extract and the nanocomposites were also studied. E. aphylla extract and both the nanomaterials exhibited significant levels of active phytochemical compounds. These compounds contributed to their potent antioxidant activity, with E. aphylla extract and Ag-TiO2 NC demonstrating the highest antioxidant activity. Besides, Ag-SeO2 NC displayed remarkable antibacterial properties against different pathogenic bacteria with 31.0 ± 1.27 mm against K. pneumonia, 31.0 ± 1.72 mm against S. aureus, and 44.0 ± 1.09 mm against B. subtilis, and antifungal properties against Candida glabrata and Aspergillus niger. The enhanced antimicrobial activity of Ag-SeO2 NC can be attributed to the synergistic effects of silver and selenium nanoparticles, which can disrupt cell membranes, induce oxidative stress, and interfere with essential cellular processes. The minimum inhibitory concentration values of Ag-SeO2 NC against S. aureus and K. pneumoniae were found to be 0.2956 mg mL-1 and 4.73 mg mL-1, respectively. The mechanism of action of Ag-SeO2 NC against both fungal strains was investigated using FTIR and HR-TEM analyses.

Hierarchically structured conductive hydrogels for electrically programmable drug delivery in a diabetic wound healing electronic patch

Smart wound dressings that integrate advanced drug delivery strategies and electrical stimulation (ES) represent a revolutionary approach for improving diabetic wound healing. However, limited drug loading efficiency and delayed reactivity to electrical inputs make it difficult to practically implement ES-controlled drug release in hydrogel-coated electrodes. In order to address these limitations, we developed a hydrogel-based electronic wound dressing patch that enables highly programmable, ES-triggered drug delivery. In particular, a hierarchically architectrual conductive polymer hydrogel composed of PEDOT: CHC/silk was designed to be used as an electroresponsive matrix and a drug reservoir. This hydrogel exhibited a high encapsulation efficiency (>90 %) for the hydrophobic drug ibuprofen and demonstrated exceptional mechanical resilience and electrochemical stability. Through systematic optimization of ES parameters such as voltage, frequency, and waveform, the system achieved precise spatiotemporal modulation of drug release. Notably, the integration of the hydrogel into interdigitated electrode arrays significantly enhanced delivery performance through improved field distribution and release control. In addition, the multifunctional patch also exhibited intrinsic antibacterial activity and biocompatibility, making it well-suited for clinical application. This work cumulatively introduces a wearable, electroceutical, and long-term active wound dressing system that is integratively assembled with wound protection, electrical treatment, and stimulus-sensitive drug delivery, hence being a promising approach to enhance diabetic wound healing through intelligent bioelectric treatment.

Developing Heterogeneous Porous 3D-Printed SiO2-Pd-K2SiO3 Monolithic Catalyst via Surface MOF Growth and Pyrolysis for the Synthesis of Antitumoral Isatins

Background/Objectives: The isatin nucleus is a privileged scaffold in drug discovery, particularly due to its proven relevance in anticancer research. Developing reusable heterogeneous 3D catalysts for drug synthesis represents a critical challenge in both industrial and academic contexts. This multi and interdisciplinary work aimed to design and synthesize a novel 3D-printed silica-based porous catalyst functionalized with palladium, evaluate its catalytic performance in isatin drug synthesis, and assess the antiproliferative activity of the resulting compounds against tumor cell lines such as HeLa, MCF-7, and MDA-MB231. Methods: The novel multifaceted approach to synthesizing this heterogeneous catalyst involved the surface growth of a metal-organic framework (ZIF-8) on 3D-printed silica support, followed by potassium silicate coating and pyrolysis. Results: After detailed physicochemical characterization, the catalyst was tested in challenging "double" palladium-catalyzed cross-coupling reactions (Suzuki, Stille, and Heck), demonstrating robustness, reusability, and high efficiency in producing bis-1,5-aryl, alkynyl, and alkenyl-isatin derivatives. Importantly, no leaching of palladium species was detected during the catalytic cycles, further underscoring the stability of the system. These isatin-based compounds exhibited remarkable cytotoxicity, with selective molecules achieving nanomolar potency against MCF-7 cells, surpassing reference drugs such as doxorubicin and sunitinib. Conclusions: This study not only introduces a novel strategy for fabricating porous heterogeneous catalysts from sintered surfaces but also highlights new biomolecules with promising applications in cancer research.

Metal ions binding and colloidal destabilization in the model systems: Implication on the magnesium chloride coagulation mechanism in tofu making

MgCl2-induced soymilk coagulation mechanism in tofu making was explored from perspectives of Mg2+ binding and colloidal properties in model systems. Isothermal titration calorimetry of bovine serum albumin (BSA)-small molecule mixtures revealed proteins contributed negligibly to Mg2+ binding sites, instead, substantial Mg2+ were bound by soymilk-borne small molecules. The results thus suggested the "protein-Mg2+-protein bridge" was hardly formed in tofu making. Zeta potentials for both BSA-small molecule system and defatted soymilk changed in a similar pattern relative to the unbound Mg2+ concentration, indicating only those small molecules-unbound Mg2+ effectively neutralized the electronegative charges on protein colloidal particles. Turbidity and particle size results revealed a critical zeta potential (-11 mV) was required to induce marked Mg2+-defatted soymilk coagulation. For heated defatted soymilks, a critical minimum protein concentration (8 mg/mL) was needed to observe the significant Mg2+-induced coagulation. This study is expected to deepen our understanding of Mg2+ coagulation mechanism in tofu making.

Multiple physiological response analyses of Chlorella vulgaris exposed to silver nanoparticles, ciprofloxacin, and their combination

The combination of silver nanoparticles (AgNPs) and ciprofloxacin (CIP) can be considered an alternative to combat multidrug-resistant microbial infections. However, knowledge about their combined toxicity after being released in an aquatic environment is scarce. This study evaluated the individual toxicity of AgNPs and CIP and their combined toxicity on the unicellular green microalga Chlorella vulgaris, evaluating cellular responses and conducting metabolomic analysis. The median effect concentrations at 96 h (EC50-96h) for AgNPs, CIP, and the mixture were 132 µg L-1, 7,000 µg L-1, and 452 µg L-1, respectively. Ciprofloxacin exhibited a synergistic effect with AgNPs. The toxic ranking for C. vulgaris was AgNPs > AgNPs + CIP > CIP. The growth rate was the most evident parameter of toxicity. Cell diameter significantly increased (p < 0.001) at 96 h for the highest concentrations tested of AgNPs, CIP, and the mixture, with increases of 24%, 41%, and 19%, respectively, compared with the control. Photosynthetic pigment analyses revealed that C. vulgaris upregulated chlorophyll, carotenoids, and pheophytin. Cell exposure to CIP caused an emergency response involving increased protein and carbohydrate concentrations to tolerate antibiotic stress. Exposure to AgNPs and CIP increased catalase and glutathione S-transferase activity, but the mixture decreased the activity. Silver nanoparticles increased malondialdehyde content in exposed cells due to fatty acid peroxidation. These pollutants revealed their potential risks in interfering with survival and metabolism. Our findings highlight the possible hazards of copollutants at environmentally relevant quantities, providing insights into the individual and combined ecotoxicity of AgNPs and CIP.

Comparative characterization of leather from different tanning processes as a contribution for a sustainable development of the leather industry

Leather is a fully biobased material (100% biodegradable organic material, with collagen as the main constituent), derived from food industry byproducts (animal skin from butchery), which represents an excellence for the Italian industry (in the last years the production value reached 4.6 billion euros and an export of 3.2 billion euros) and a highly sustainable material. However, its production is still strongly handicraft, traditional and unfortunately based on the employment of toxic chemicals, such as chromium and glutaraldehyde. A deep knowledge of the tanning process and of the specific features of leather coming from different processing routes is crucial for the design and development of innovation in the field for a more sustainable and knowledge-based production. In this contest, the impact of tanning process on the surface reactivity of leather plays a crucial role. In the present research well established characterizations (optical microscopy, shrinkage temperature, wettability, metal content, infrared spectroscopy and X-ray diffraction) and new and unconventional methods for the leather field (surface topography, instrumented indentation and zeta potential electrokinetic measurements) were applied and optimized for the characterization of leather samples from traditional (e.g. Chrome and Glutaraldehyde) and innovative (e.g. vegetable, carbamoyl sulphate, starch, aluminum, zeolite, triazine and Olive Mill Wastewaters -OMW) tanning processes. The suitability of the characterization protocol for the in-depth investigation and comparison of leather samples from different processing has been demonstrated highlighting its applicability for a knowledge-based innovation in the leather field.

Efficient removal performance of polystyrene microplastics from strongly acidic solutions by two functionalized nanosized biochars derived from low-cost sustainable sources

Microplastic pollution in aquatic systems and other environments has garnered significant concern due to its persistence, widespread environmental migration, and detrimental impact on entire ecosystems. Such pollution type poses severe threats to human life quality, as well as flora and fauna. In response to this pressing global issue, the current research explores a simple, sustainable, and cost-effective solution by employing two newly modified nanobiochar materials with oxalic acid, for the adsorptive removing of polystyrene microplastics (PSMPs) from aquatic systems. The two nanobiochars were derived from sustainable and low-cost feedstocks, specifically pineapple and artichoke wastes via pyrolysis at 300 °C and 350 °C, yielding NBP and NBA, respectively. These were subsequently modified with oxalic acid (OA) to create OA@NBP and OA@NBA nanobiosorbents. The EDX analysis confirmed the primary elemental composition of carbon, oxygen, nitrogen, calcium, and magnesium. TEM analysis revealed distinct differences in particle size and morphology of OA@NBA which displayed small particles ranging from 9.81 to 16.15 nm, while OA@NBP exhibited larger particles with size ranging from 68.86 to 105.12 nm, highlighting their structural differences. OA@NBP and OA@NBA nanobiosorbents were evaluated in PSMPs removing from aquatic systems providing the optimum conditions 30-50 mg nanobiosorbent, 40 min time and pH 2.0. The adsorption and binding mechanisms were best fitted to pseudo-second-order kinetics and Langmuir-Freundlich models. Thermodynamic analysis revealed that the adsorption process was non-spontaneous and endothermic. The loaded PSMPs on OA@NBA and OA@NBP nanobiosorbents were successfully regenerated and successively used to remove PSMPs with 86.8 % and 89.5 %, respectively, after the first regeneration step. Additionally, the two nanobiosorbents demonstrated excellent PSMPs removal efficiencies in simulated seawater samples adjusted to pH 2.0, achieving removal rates of 93.4 % (OA@NBA) and 87.4 % (OA@NBP). Therefore, the characterized PSMPs removal performance at pH 2.0 can afford a good avenue for potential application of the two explored nanobiosorbents in effective removal of PSMPs pollutant from other acidic industrial wastewater matrices.

Tailoring alginate nanoparticles: influence of reverse micelle templates on structure, size, and encapsulation properties

In this work, alginate nanoparticles (ALG-NPs) were synthesized using reverse micelles (RMs) as nanoreactors to investigate how interfacial charge influences their structure, size, and encapsulation properties. Three types of RMs were employed: (i) anionic RMs formed by sodium bis(2-ethylhexyl)sulfosuccinate (AOT) in isopropyl myristate, (ii) cationic RMs formed by benzyl-hexadecyl-dimethylammonium chloride (BHDC) in toluene, and (iii) nonionic RMs formed by 2-[4-(2,4,4-trimethylpentan-2-yl)phenoxy]ethanol (TX-100) in cyclohexane. ALG-NPs were synthesized at varying water contents (W 0 = [H2O]/[surfactant]) and resuspended in water at pH 6.5 for characterization. Dynamic light scattering revealed that nanoparticle size is highly dependent on the RM template. ALG-NPs synthesized in AOT RMs were the smallest, with their size increasing as W 0 increased, a trend also observed for TX-100 RMs. In contrast, the opposite behavior was observed in BHDC RMs, where nanoparticle size decreased with increasing W 0. This difference reflects the degree of crosslinking with Ca2+ ions as influenced by interfacial charge. Using N,N-dimethyl-6-propionyl-2-naphthylamine (PRODAN) and curcumin, we found that AOT-based ALG-NPs were the most compact and rigid, offering prolonged protection for curcumin against degradation under ambient conditions. This study underscores the potential of tailoring ALG-NPs through precise control of interfacial environments, offering new opportunities for applications in food technology, nutraceuticals, and biotechnology. By stabilizing bioactive compounds and enhancing bioavailability, these findings pave the way for innovative functional formulations.

Investigating the Tumor-Suppressive, Antioxidant Effects and Molecular Binding Affinity of Quercetin-Loaded Selenium Nanoparticles in Breast Cancer Cells

In 2023, breast cancer is expected to have nearly 2 million new cases, making it the second most common cancer overall and the most prevalent among women. Multidrug resistance limits the effectiveness of chemotherapy; however, quercetin, a natural flavonoid, helps combat this issue. The goal of the current investigation is to determine the impact of a novel composite of quercetin and selenium nanoparticles (SeNPs) on the breast cancer cell lines MDA-MB-231 and MCF-7 in order to enhance quercetin’s tumor-suppressive action and decrease selenium (Se) toxicity. Particle size, zeta potential, FTIR, SEM, UV–VIS spectroscopy, and EDX were used to characterize quercetin-selenium nanoparticles (Que-SeNPs), in addition to evaluation of the antioxidant, apoptotic, and anticancer properties. Moreover, autophagy (Atg-13) protein receptors and PD-1/PD-L1 checkpoint were targeted using molecular docking modeling and molecular dynamics (MD) simulations to assess the interaction stability between Que-SeNPs and three targets: PDL-1, PD-1, and Atg-13HORMA domain. Que-SeNPs, synthesized with quercetin, were stable, semi-spherical (80–117 nm), and had a zeta potential of − 37.8 mV. They enhanced cytotoxicity, antioxidant activity, and apoptosis compared to quercetin alone in MCF-7 and MDA-MB-231 cells. Docking simulations showed strong binding to the PD-1/PD-L1 checkpoint and Atg-13HORMA protein receptors. Moreover, the molecular dynamics simulation revealed that the behavior of the PD-L1 intriguing insights into its structural dynamics, therefore, suggesting a stable phase where the complex is adjusting to the simulation environment. The present data confirmed that the stable formula of Que-SeNPs is cytotoxic, antioxidant, and has a potential activity to increase apoptosis in breast cancer cells, with the potential to inhibit PD-1/PD-L1 and Atg-13 proteins.

Graphical Abstract

Role of Que-SeNPs on breast cancer cells in vitro against two breast cancer cell lines MDA-MB-231 and MCF-7.

Synthesis of metallic nanoparticles using biometabolites: mechanisms and applications

Bio-metabolites have played a crucial role in the recent green synthesis of nanoparticles, resulting in more versatile, safer, and effective nanoparticles. Various primary and secondary metabolites, such as proteins, carbohydrates, lipids, nucleic acids, enzymes, vitamins, organic acids, alkaloids, flavonoids, and terpenes, have demonstrated strong metal reduction and stabilization properties that can be utilized to synthesize nanomaterials and influence their characters. While physical and chemical methods were previously used to synthesize these nanomaterials, their drawbacks, including high energy consumption, elevated cost, lower yield, and the use of toxic chemicals, have led to a shift towards eco-friendly, rapid, and efficient alternatives. Biomolecules act as reducing agents through deprotonation, nucleophilic reactions, transesterification reactions, ligand binding, and chelation mechanisms, which help sequester metal ions into stable metal nanoparticles (NPs). Engineered NPs have potential applications in various fields due to their optical, electronic, and magnetic properties, offering improved performance compared to bulkier counterparts. NPs can be used in medicine, food and agriculture, chemical catalysts, energy harvesting, electronics, etc. This review provides an overview of the role of primary and secondary metabolites in creating effective nanostructures and their potential applications.

Preparation, characterization, and pesticide adsorption capacity of chitosan-magnetic graphene oxide nanoparticles with toxicological studies

This study investigated magnetic graphene oxide nanoparticles (MGO-NPs) and functionalized with chitosan (CS-MGO-NPs) for removing florasulam, metalaxyl, and thiamethoxam pesticides from water. A comprehensive characterization employing Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), zeta potential measurements, XRD analysis, and surface area/porosity determinations confirmed the successful synthesis of the composites with the desired properties. Factorial experimental design was applied to identify the most significant factors of pesticide concentration, adsorbent amount, temperature, pH, agitation time, and ionic strength on the efficiency of removal of tested pesticides from water samples. CS-MGO-NPs exhibited superior removal efficiencies for all three pesticides compared to MGO-NPs. They achieved high removal rates for florasulam (average 92.94%) and metalaxyl (average 88.95%), while demonstrated moderate effectiveness against thiamethoxam (average 64.04%). Different kinetic and isotherm models described how well the nanoparticles adsorbed each pesticide. According to these models, the pseudo-first-order kinetic model interpreted well the adsorption of florasulam, and thiamethoxam onto CS-GO-NPs. While the pseudo-second-order kinetic model interpreted well the adsorption of metalaxyl. The Freundlich isotherm model gave the best fit with florasulam onto CS-GO-NPs. While the Langmuir isotherm model gave the best fit with metalaxyl and thiamethoxam. Finally, the toxicological studies of CS-MGO-NPs in rats were performed, and it was found negative effects at high doses, suggesting caution is needed for practical applications. Overall, this study shows promise for CS-MGO-NPs in water purification, but safety needs further investigation.

Nanoencapsulation reduces the perception of carvacrol odor, enhances the control of Botrytis cinerea growth and preserves grape quality

Botrytis cinerea is the causal agent of gray mold, which is one of the most widespread and destructive fungal diseases that compromises the productivity and quality of grapes produced throughout the world. This work aimed to verify, for the first time, the impact of unencapsulated carvacrol and encapsulated in Eudragit® nanocapsules (Eud-Carv NCs) and chia mucilage (Chia-Carv NCs) on mycelial growth and spore germination of B. cinerea. The impact of these three forms of carvacrol on grape quality parameters, including texture, pH, color, volatile profile and odor perception were also evaluated. All three forms of carvacrol suppress spore germination and mycelial growth of B. cinerea. When used at sublethal levels, the encapsulated forms (Eud-Carv NCs and Chia-Carv NCs) were more effective by inhibiting up to 90 % of fungal growth, while unencapsulated carvacrol suppressed up to 67 %. Both nanocapsules showed no effect on the physicochemical characteristics and volatile profile of the grapes. Furthermore, the odor of carvacrol was not perceived in the grapes treated with both encapsulated forms, since the levels of this monoterpene (9.0 to 11.3 μg/L over 21 days of grape storage) were below the odor threshold (40 μg/L). Conversely, when grapes were treated with the unencapsulated form, carvacrol levels were about 10 times higher than the odor threshold, which negatively impacts the sensory perception of the grape. Therefore, the use of carvacrol encapsulated in Eudragit® and chia mucilage proved to be a promising alternative for preventing B. cinerea infections in grapes.

Aqueous colloid flow batteries with nano Prussian blue

Flow battery is a safe and scalable energy storage technology in effectively utilizing clean power and mitigating carbon emissions from fossil fuel consumption. In the present work, we demonstrate an aqueous colloid flow battery (ACFB) with well-dispersed colloids based on nano-sized Prussian blue (PB) cubes, aiming at expanding the chosen area of various nano redox materials and lowering the cost of chemicals. Taking advantage of the two redox pairs of PB, the developed all-PB cell employing a low-cost dialysis membrane with the synthesized PB on both sides displays an open-circuit voltage (OCV) of 0.74 V. Moreover, when paired with an organic tetra pyridine macrocycle the cell with PB as positive electrolyte exhibits an OCV of 1.33 V and a capacity fade rate of 0.039 %/cycle (0.8 %/day). Redox-active colloids exhibit enduring physicochemical stability, with no evident structural or morphological changes after extensive cycling, highlighting their potential for cost-effective and reliable ACFB energy storage.

Gallic acid-guar gum and chitosan-based polyelectrolyte complex film exhibited enhanced wound healing in full-thickness excision wound model

Recently, there has been a great interest in the development of innovative wound dressing materials based on natural bioactives, as they can accelerate the healing process and address the issues related to traditional wound dressings. The current study focuses on developing a novel derivative of guar gum (GG) and gallic acid (GA) using a simple, free radical-mediated polymerization reaction aimed at enhancing the antioxidant properties of GG. Multiple spectroscopic investigations were performed to validate the GA-GG conjugate. NMR and FTIR confirmed GA integration, UV spectroscopy indicated changes in electronic transition, DSC analysis suggested a reduction in crystallinity, and XRD revealed structural modifications. SEM revealed a porous structure that reflected its polymerized nature. Due to inadequate mechanical strength and film-forming ability of the synthesized GA-GG conjugate, polyelectrolyte complexation method using chitosan was explored to form a polyelectrolyte complex (PEC) film. The film exhibited a high swelling rate, excellent antioxidant properties, and was both hemocompatible and exhibited improved antimicrobial properties. In vitro, in ovo, and in vivo characterizations were performed to compare the performance of these biocomposite films to those of their counterparts. It promoted angiogenesis in the chick yolk sac membrane and demonstrated good cytocompatibility in cell proliferation studies on the viability of the L929 mouse fibroblast cell line. In vivo wound healing efficacy of the PEC film in wound closure was 94.5% as compared to the untreated disease control group (p < 0.001). This work highlights the development of an innovative GA-GG conjugate/chitosan PEC-based film with significant potential for wound healing applications.

Smartphone-assisted colorimetric detection of nickel(II) ions using a novel benzothiazole-quinoline dyad in semi-aqueous media

In this study, we present three different approaches for the colorimetric detection of Ni2+ ions using a specifically designed benzothiazole-quinoline dyad (L) synthesized via the Knoevenagel condensation reaction in high yield. The unique properties of L enable a rapid and selective response to Ni2+ ions, making it an ideal probe for practical applications. The probe L shows a pale yellow color under normal conditions. Upon interaction with Ni2+ ions, L undergoes a significant color change from pale yellow to bright orange, allowing for visual detection in semi-aqueous media. This rapid colorimetric response enables real-time monitoring of Ni2+ concentrations. The absorption maximum of L undergoes a bathochromic shift in the presence of Ni2+ ions due to ligand-to-metal charge transfer (LMCT). The probe L could form a 2 : 1 [L : Ni2+] stoichiometric complex, confirmed through Job's plot and ESI mass analysis with an estimated association constant of 2.61 × 106 M-2. The probe L could detect Ni2+ concentration down to 61 nM, 106 nM, and 129 nM via a UV-Vis spectrophotometer, smartphone-assisted RGB method, and test paper strip analysis. The binding mechanism of probe L with metal ions was studied using 1H NMR, ESI mass spectrometry, and DFT calculations. The zeta potential analysis showed a potential of -28.38 mV for the free ligand and +12.09 mV upon complexation with Ni2+. More importantly, the potential application of probe L includes the quantification of Ni2+ ions in various water samples through all three sensing approaches.

A catalytic perspective to nanomaterials reactivity-based toxicity; implications for single- and multiple-component nanomaterials (nanocomposites)

The extended use of a given product normally precedes concerns about it. The reactivity-based nanotoxicity is a major concern that must be tackled from its fundamental understanding to its regulatory management. Moreover, concepts and ideas must seamlessly flow between relevant performers. Functional nanomaterials have been used in many fields; among these, catalysis is probably the earliest more extended application of nanomaterials, these are engineered to afford specific properties, and are typically known as Engineered Nanomaterials (ENMs). Heterogenous catalysis shares its basic features with reactivity-based toxicity. In both cases, we are dealing with phenomena triggered by reactions occurring at the surface of the nanomaterial. Therefore, the extensive knowledge in heterogeneous catalysis is key to understanding reactivity-based nanotoxicology. In this regard, determining surface exposure is fundamental to mechanistically comprehend dose-response, similar to how catalysis shifted from mass-based to surface-centered metrics. Catalysis science made a further refinement iteration: reactions occur at surfaces, though not all surfaces are necessarily reactive, making it crucial to normalize per reactive site. This perspective focuses on two key aspects that link heterogeneous catalysis and reactivity-based nanotoxicity: the reactive sites on the surface of nanomaterials and how different combinations of nanomaterials appear and perform. A comment is also made regarding the somewhat vague term 'multicomponent nanomaterial,' which is contrasted with the well-defined, established, and widely accepted term 'nanocomposite' within the chemical community. Clear and precise terminology and concepts are essential for effective research and regulation.

Enhancement of anaerobic digestion by adding elemental sulfur

In this study, a new approach to enhance methane (CH4) production from organic substrates in anaerobic digestion (AD) has been discovered. That is, the addition of elemental sulfur (S0) particles into the AD system promotes the synergistic growth of elemental sulfur disproportionation bacteria, acidogenic bacteria and methanogenic archaea, thus facilitating hydrolysis, acidogenesis and methanogenesis. The efficacy of this AD enhancement pathway was confirmed in AD experiments with glucose as a model organic substrate. The results demonstrated that CH4 production in the AD system increased considerably with S0 dosages ranging from 20 mg/L to 300 mg/L. Two gas production peaks appeared at dosages of 20 mg/L and 180 mg/L, where the total CH4 production increased by 2.1 times and 2.5 times, respectively compared with the control group. However, inhibitory effect was observed for S0 dosages above 300 mg/L. The chemical states of S, the microbial community and the abundance of key functional enzymes in the AD system were analyzed. The results showed that S0 addition increased the relative abundance of Dethiobacteraceae, Caldatribacterium, Anaerolineaceae, Methanobacterium and Methanosaeta and considerably increased the abundance of key functional enzymes, such as dehydrogenase, D-glucosidic glucosidase, pyruvate synthase and acetyl-CoA deacetylase. The enrichment of these microorganisms and functional enzymes was strongly positively correlated with the production of volatile fatty acids and CH4, demonstrating that S0 addition effectively enhances methanogenesis during AD.

Agglutination of Escherichia coli, Clostridium perfringens, and Salmonella enterica through competitive exclusion using potassium chloride with gum arabic

Bacterial infections causing necrotic enteritis and diarrhea pose a considerable economic loss to the animal industry. Using mannose oligosaccharides as competitive exclusion agents is an alternative method to antibiotic growth promoters; however, these materials are rapidly metabolized by gut microbiota, posing a challenge in sustaining their efficacy. The aim of this study was to identify an agglutination material that is effective against pathogens. Polysaccharides and salts were assessed using agglutination assays, microscopy, and zeta potential analysis. Gum arabic (GA) demonstrated strong agglutination against Escherichia coli and Salmonella enterica. Potassium chloride altered the cell form of Clostridium perfringens from rod-like to coccoid. When combined with GA, KCl effectively agglutinated all three bacterial species tested. Zeta potential analysis showed that agglutination resulted from bacteria, GA, and KCl interactions. Among various salts mixed with GA, KCl was found to strongly agglutinate C. perfringens upon its change into the coccoid form. Moreover, this combination has been shown to agglutinate mixtures of pathogens, such as C. perfringens and S. enterica. Thus, a combination of GA and KCl offers a potential solution to combat the pathogens associated with necrotic enteritis and diarrhea in animals.

Efficient Adsorption of Ionic Liquids in Water Using -SO3H-Functionalized MIL-101(Cr): Adsorption Behavior and Mechanism

With the increasing application of ionic liquids (ILs) in industrial areas, the removal of ILs from aqueous media has attracted considerable attention due to their potential environmental impact. In this study, we investigated the adsorption behavior and removal mechanism of ILs in water using the metal-organic framework material MIL-101(Cr) and its sulfonated derivative MIL-101(Cr)-SO3H. It was observed that MIL-101(Cr)-SO3H exhibited notably elevated adsorption capacity (1.19 mmol/g) and rapid adsorption kinetics (1.66 g/mmol·min-1) for [C4mim]Cl in comparison to its unmodified form, underscoring the impact of strategic sulfonation on enhancing adsorption. Also, MIL-101(Cr)-SO3H showcased the effective removal of various ILs featuring diverse cations and varying anions, highlighting its broad-spectrum capture capacities. The adsorption process is less influenced by the type of cations and anions. In contrast, enhanced adsorption of [C16mim]Cl by MIL-101(Cr)-SO3H demonstrated that the length of the alkyl chain of ILs' cation exerted a more significant influence on the adsorption than the type of head and tail group. This enhancement is attributed to a synergistic interplay of pore filling, electrostatic interactions, hydrophobic interactions, and micelle enrichment. These findings provided valuable insights into optimizing the design of metal-organic framework materials for the efficient removal of IL pollutants.

Effectiveness of a Novel Liposomal Methylglyoxal-Tobramycin Formulation in Reducing Biofilm Formation and Bacterial Adhesion

Background: The emergence of multidrug-resistant bacteria presents a significant global health threat. Liposomal antibiotics have shown a potential to improve antibiotic delivery and efficacy. This study aimed to develop liposomes encapsulating tobramycin (TOB) and methylglyoxal (MGO) to enhance TOB activity while reducing bacterial adhesion and biofilm formation. Methods: Clinical isolates of Pseudomonas aeruginosa and Klebsiella pneumoniae were characterized using whole-genome sequencing. Liposomes (Lip-MGO-TOB) were formulated using Manuka honey as a surfactant and loaded with MGO and TOB. Antibacterial activity, biofilm formation, and bacterial cell adhesion assays were performed to compare the efficacy of Lip-MGO-TOB against free TOB. Liposome characterization included analyses of morphology, zeta potential, TOB encapsulation efficiency, and stability under various biological conditions. Results: The Lip-MGO-TOB formulation, at a minimum inhibitory concentration (MIC) of 32 µg/mL, reduced the biofilm formation of the P. aeruginosa isolate (PA85) by 68%. Conversely, free TOB, at a MIC of 64 µg/mL, achieved only a 21% reduction. For the K. pneumoniae isolate (KP57), Lip-MGO-TOB inhibited bacterial adhesion to A549 cells at a lower concentration (256 µg/mL) compared to free TOB (512 µg/mL). Lip-MGO-TOB demonstrated sustained drug release over 24 h under tested conditions and retained over 99% of TOB. Conclusions: The Lip-MGO-TOB formulation significantly enhanced TOB activity against resistant bacteria compared to free TOB. Additionally, it provided a stable drug delivery system with controlled drug release. Liposomal TOB represents a promising advancement in combating antibiotic resistance by improving the efficacy and delivery of conventional antibiotics.

Cannabidiol-Loaded Lipid Nanoparticles Incorporated in Polyvinyl Alcohol and Sodium Alginate Hydrogel Scaffold for Enhancing Cell Migration and Accelerating Wound Healing

Chronic wounds represent a persistent clinical challenge due to prolonged inflammation and impaired tissue repair mechanisms. Cannabidiol (CBD), recognized for its anti-inflammatory and pro-healing properties, shows therapeutic promise in wound care. However, its delivery via lipid nanoparticles (LNPs) remains challenging due to CBD's inherent instability and low bioavailability. This study developed and characterized a novel hydrogel scaffold composed of CBD-loaded LNPs (CBD/LNPs) integrated into a polyvinyl alcohol (PVA) and sodium alginate (SA) matrix, designed to enhance wound repair and mitigate inflammation. The characteristics of the hydrogel scaffold were observed including the degree of swelling and LNPs' release profiles. Furthermore, in the results, CBD/LNPs displayed enhanced stability and reduced cytotoxicity compared to unencapsulated CBD. In vitro assays demonstrated that CBD/LNPs significantly promoted fibroblast migration in gap-closure wound models and reduced intracellular reactive oxygen species, supporting their potential as a biocompatible and efficacious agent for cellular repair and oxidative stress attenuation. In vivo experiments using adult male Wistar rats with aseptic cutaneous wounds revealed that treatment with CBD/LNP-PVA/SA hydrogel scaffold significantly accelerated wound closure relative to blank hydrogel controls, demonstrating a substantial reduction in the wound area over time. Histological analysis confirms notable improvements in skin morphology in wounds treated with CBD/LNP-PVA/SA hydrogel scaffold with evidence of accelerated epithelialization, enhanced collagen deposition, and increased dermal thickness and vascularization. Additionally, skin histology showed a more organized epidermal layer and reduced inflammatory cell infiltration in CBD/LNP-PVA/SA hydrogel scaffold-treated wounds, corresponding to a 35% increase in the wound closure rate by day 28 post-treatment. These findings suggest that CBD/LNP-PVA/SA hydrogel scaffolds facilitate inflammation resolution and structural wound healing through localized, sustained CBD delivery. The dual anti-inflammatory and wound-healing effects position CBD/LNP-PVA/SA hydrogel scaffold as a promising approach for chronic wound management. Future investigations are warranted to elucidate the mechanistic pathways by which CBD modulates the skin architecture and to explore its translational applications in clinical wound care.

Antimicrobial Activity of Nano-GeO2/CTAB Complex Against Fungi and Bacteria Isolated from Paper

Microbial attack, particularly fungal degradation of cellulose, is a leading cause of paper damage. To address fungal spores and the rising concern of microbial drug resistance, a nano-Germanium dioxide (GeO2)/cetyltrimethylammonium bromide (CTAB) complex (nano-GeO2/CTAB complex) with potent antibacterial properties was synthesized. Its inhibitory effects were evaluated against bacteria, including Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, as well as fungi isolated from paper (Fusarium spp., Aspergillus spp., and Penicillium citrinum). The nano-GeO2/CTAB complex exhibited significant (p < 0.05) inhibitory effects against S. aureus and E. coli. Moreover, a 60 min treatment with 1 mg/mL of the complex significantly inhibited the growth of all tested fungi and reduced their biomass after five days of culture, while 4 mg/mL completely deactivated spores. Filter paper pre-treated with the nano-GeO2/CTAB complex showed complete resistance to microbial attack, exhibiting no fungal growth and a clear inhibition zone devoid of bacterial growth. In contrast, untreated controls displayed fungal coverage exceeding 95% within five days. These findings highlight the nano-GeO2/CTAB complex as a promising antimicrobial agent for protecting paper materials from microbial degradation.

Synergistic growth suppression of Fusarium oxysporum MLY127 through Dimethachlon Nanoencapsulation and co-application with Bacillus velezensis MLY71

Fusarium oxysporum is a destructive plant pathogen with robust survival mechanisms, complicating control efforts. This study aimed to develop nanoformulated fungicides, screen antagonistic bacteria, and evaluate their combined efficacy. A novel self-emulsifying nanoemulsion (DZW) was formulated using zein and benzaldehyde-modified wheat gluten (BgWG) as carriers for dimethachlon (DTN). The preparation process optimized material ratios and emulsification techniques. Concurrently, antagonistic bacterial strains against F. oxysporum were screened via the plate standoff method, identifying Bacillus velezensis MLY71 as both antagonistic and compatible with DTN. The DZW nanoemulsion achieved a particle size of 93.22 nm, an encapsulation efficiency (EE) of 90.57%, and a DTN loading capacity (LC) of 67.09%, with sustained release over 96 h. The combination of DTN (0.04 mg·mL⁻¹) and B. velezensis MLY71 (1 × 10⁴ CFU·mL⁻¹) achieved a 76.66% inhibition rate against F. oxysporum MLY127, 1.71 times greater than DTN alone, indicating significant synergy. At a DTN concentration of 0.20 mg·mL⁻¹, the combination of DZW and MLY71 showed a synergy coefficient of 1.33. This synergy was also observed in soil environments, indicating its adaptability for controlling soil-borne pathogens. As sustainable management continues to gain attention in agricultural disease control, this study offers a promising strategy for achieving higher efficacy with the same fungicide dose or satisfactory control with reduced fungicide application. The excellent drug-loading performance of BgWG also expanded the applications of the wheat by-product gluten.

A novel metal-free perylene-functionalized graphite adsorbent for efficient antibiotic removal from wastewater

Adsorption remains a widely utilized and effective technique for removing chemical contaminants from polluted water, and novel adsorbents are currently in the process of being developed. The presence of antibiotics residues in aqueous effluents is a potential concern due to their potential adverse effects on living organisms. In this work, perylene tetracarboxylic acid-functionalized expanded graphite (PTCA-EG) was synthesized as a metal-free adsorbent and its potential for efficient treatment of contaminated wastewater with cefalexin (CLX) antibiotic was studied. The experimental variables were modeled and optimized using central composite design (CCD) and response surface methodology (RSM) to maximize adsorption efficiency. In this regard, the contact time of 20 min, solution pH of 7.0, adsorbent dosage of 18 mg, and initial CLX concentration of 45 mg L-1 were found to be the optimum conditions for adsorptive removal of CLX with a maximum efficiency of 99 ± 1.21%. In addition, the adsorption equilibrium data were well analyzed with isotherm, kinetic, and thermodynamic studies. The isotherm results revealed the adsorption process was favorable and took place on the heterogeneous surface. Moreover, the Langmuir maximum adsorption capacity (Qmax) was determined as 220.7 mg g-1. Also, thermodynamic parameters revealed the spontaneity and endothermic nature of the adsorption process. The reusability studies demonstrated that the spent PTCA-EG can be easily regenerated through NaOH solution (0.01 mol L-1) and reused for six cycles without any significant decrease in its adsorption efficiency. Also, the PTCA-EG showed excellent behavior in adsorptive removal of CLX in real water samples including river water (96.61 ± 1.82%) and hospital effluents (91.91 ± 3.41-93.69 ± 3.06%).

Selectively recovering rare earth elements with carboxyl immobilized metal-organic framework from ammonium-rich wastewater

The material with high adsorption capacity and selectivity is essential for recovering rare earth elements (REES) from ammonium (NH4+-N)-rich wastewater. Although the emerging metal-organic framework (MOF) has gained intensive attention in REES recovery, there are scientific difficulties unsolved regarding restricted adsorption capacity and selectivity, hindering its extensive engineering applications. In this work, a diethylenetriamine pentaacetic (DTPA)-modified MOF material (MIL-101(Cr)-NH-DTPA) was prepared through an amidation reaction. The MIL-101(Cr)-NH-DTPA showed enhanced adsorption capacity for La(III) (69.78 mg g-1), Eu(III) (103.01 mg g-1) and Er(III) (83.41 mg g-1). The adsorption isotherm and physical chemistry of materials indicated that the adsorption of REEs with MIL-101(Cr)-NH-DTPA was achieved via complexation instead of electrostatic adsorption. Such complexation reaction was principally governed by -COOH instead of -NH2 or -NO2. Meanwhile, the resulting material remained in its superior activity even after five cycles. Such a constructed adsorbent also exhibited excellent selective adsorption activity for La(III), Eu(III), and Er(III), with removal efficiency reaching 70% in NH4+-N concentrations ranging from 100 to 1500 mg L-1. This work offers underlying guidelines for exploitation an adsorbent for REEs recovery from wastewater.

Controlled Release of Madecassoside and Asiaticoside of Centella asiatica L. Origin from Sustainable Cold-Processed Topical Formulations

Centella asiatica L. extract is a promising natural agent for the treatment of atopic dermatitis. It significantly reduces inflammation due to its immunomodulatory properties, mainly attributed to the presence of pentacyclic triterpenes, namely madecassoside and asiaticoside. Their incorporation into sustainable cold-processed topical formulations, such as emollient-rich emulsions and cosmetic gel containing natural hydrophilic polymers, should inhibit inflammation in atopic skin. Therefore, the objective of this study is to investigate the controlled release of madecassoside and asiaticoside isolated from Centella asiatica L., loaded into topical formulations, namely emollient-rich O/W and W/O emulsions and cosmetic gel, which could support the treatment of atopic dermatitis. The carriers of active substances have been prepared with sustainable emulsifiers, active substances, and emollients obtained by green technologies from food industry wastes. Low-energy methods during the carrier emulsification process were applied to reduce carbon footprints and preserve the valuable properties of the raw materials used. The influence of the Centella asiatica L. extract on the physicochemical properties of the formulations was studied, showing a satisfactory degree of stability of the formulations obtained. Moreover, factors that may influence the mechanism and kinetics of the release of madecassoside and asiaticoside, such as the concentration of the active substance, the pH of the dissolution medium, and the type of the carrier, have been tested and widely discussed.

Multifunctional gold nanoparticles for cancer theranostics

The diagnosis and treatment of cancer can often be challenging requiring more attractive options. Some types of cancers are more aggressive than others and symptoms for many cancers are subtle, especially in the early stages. Nanotechnology provides high sensitivity, specificity and multimodal capability for cancer detection, treatment and monitoring. In particular, metal nanoparticles (NPs) such as gold nanoparticles (AuNPs) are attractive nanosystems for researchers interested in bioimaging and therapy. The size, shape and surface of AuNPs can be modified for improving targeting and accumulation in cancer cells, for example through introduction of ligands and surface charge. The interactions of AuNPs with electromagnetic radiation (e.g., visible-near-infrared, X-rays) can be used for photothermal therapy and radiation therapy, through heat generated from light absorption and emission of Auger electrons, respectively. The subsequent expansion and high X-ray attenuation from AuNPs can be used for enhancing contrast for tumor detection (e.g., using photoacoustic, computed tomography imaging). Multi-functionality can be further extended through covalent/non-covalent functionalization, for loading additional imaging/therapeutic molecules for combination therapy and multimodal imaging. In order to cover the important aspects for designing and using AuNPs for cancer theranostics, this review focuses on the synthesis, functionalization and characterization methods that are important for AuNPs, and presents their unique properties and different applications in cancer theranostics.

Revolutionizing treatment for topical fungal infections: evaluating penetration-enhancer-containing vesicles as a fluconazole delivery system: Ex-vivo and in-vivo dermal testing

Fungal infections pose a significant challenge in numerous developing nations and worldwide, necessitating urgent solutions. Oral administration of antifungal medications often leads to severe adverse reactions. Hence, employing topical delivery systems is preferred to ensure efficient dermal delivery of antifungal agents while minimizing side effects. Furthermore, the incorporation of penetration enhancers into nanocarriers loaded with antifungal agents has demonstrated enhanced efficacy in combating mycotic infections. Consequently, ultra-deformable penetration enhancer-containing vesicles (PEVs) were developed to explore this promising approach. In this study, Labrasol® and Transcutol® were used as penetration enhancers in formulating ultra-deformable PEVs containing the antifungal agent Fluconazole (FCZ). The PEVs underwent comprehensive characterization, including measurements of particle size (PS), charge, and entrapment efficiency (EE%). The results revealed that the size of tested PEVs ranged from 100 to 762 nm. All particles exhibited a negative charge, with a minimum zeta potential (ZP) of -38.26 mV, and an intermediate entrapment efficiency (EE%) that reached approximately 40%w/w. Ex-vivo studies demonstrated the ability of PEVs to deliver FCZ to the dermis while minimizing transdermal delivery. The selected formula was tested in-vivo using candidiasis-induced rat model and showed a superiority in its antifungal effect against Candida Albicans compared to the drug control. Stability studies were executed for the selected formula, and revealed good stability shown by the insignificant change in the PS, ZP& EE% over a six-month period.

Nano-Ayurvedic Medicine Approaches Using Ginkgo biloba-Phytochemicals Functionalized Gold Nanoparticles Against Breast Cancer

Purpose

Breast cancer is a significant global health issue, contributing to 15% of cancer-related deaths. Our laboratory has pioneered a novel approach, combining Ayurvedic principles with green nanotechnology, to develop a scientifically rigorous medical modality referred to as Nano-Ayurvedic Medicine, recently approved by the US Patents and Trademarks Office. Here in we report a new Nano-Ayurvedic medicine agent derived from gold nanoparticles encapsulated with phytochemicals from Ginkgo biloba plant (GB-AuNPs).

Methods

We have developed biocompatible gold nanoparticles using electron-rich phytochemicals from Ginkgo biloba as reducing agent cocktail. Ginkgo biloba phytochemical-encapsulated gold nanoparticles (GB-AuNPs) were fully characterized, and their anticancer activity, including immunomodulatory profiles, were evaluated against breast (MDAMB-231) cancer cell lines.

Results

Characterization revealed spherical morphology for GB-AuNPs and possessed optimum in vitro stability through high zeta potential of -34 mV for optimum in vivo stability. The core size of GB-AuNPs of 19 nm allows for penetration into tumor cells through both EPR effects as well as through the receptor-mediated endocytosis. The Antitumor efficacy of this nano-ayurvedic medicine agent revealed strong antitumor effects of GB-AuNPs towards MDAMB-231. Our investigations reveal that GB-AuNPs enhance anti-tumor cytokines (IL-12, TNF-α, IFN-γ) and reduce pro-tumor cytokines (IL-10, IL-6), promoting the conversion of protumor M2 macrophages into M1-like macrophage antitumor phenotype. Cellular studies show that GB-AuNPs offer superior anti-tumor efficacy and a better safety profile against breast tumors compared to cisplatin.

Conclusion

Our investigations have demonstrated that the nano-ayurvedic medicine agent, GB-AuNPs, treats cancers through an immunomodulatory mechanism facilitated by elevated levels of anti-tumor cytokines (TNF-α, IFN-γ and IL-12) with concomitant downregulation of pro-tumor cytokines expression (IL-6 and IL-10). The green nanotechnology approach for the development of nano-ayurvedic medicine agent (GB-AuNPs), as described in this paper, presents new and attractive opportunities for treating human cancers and other debilitating diseases and disorders.

In chemico methodology for engineered nanomaterial categorization according to number, nature and oxidative potential of reactive surface sites

Methanol probe chemisorption quantifies the number of reactive sites at the surface of engineered nanomaterials, enabling normalization per reactive site in reactivity and toxicity tests, rather than per mass or physical surface area. Subsequent temperature-programmed surface reaction (TPSR) of chemisorbed methanol identifies the reactive nature of surface sites (acidic, basic, redox or combination thereof) and their reactivity. Complementary to the methanol assay, a dithiothreitol (DTT) probe oxidation reaction is used to evaluate the oxidation capacity. These acellular approaches to quantify the number, nature, and reactivity of surface sites constitute a new approach methodology (NAM) for site-specific classification of nanomaterials. As a proof of concept, CuO, CeO2, ZnO, Fe3O4, CuFe2O4, Co3O4 and two TiO2 nanomaterials were probed. A harmonized reactive descriptor for ENMs was obtained: the DTT oxidation rate per reactive surface site, or oxidative turnover frequency (OxTOF). CuO and CuFe2O4 ENMs exhibit the largest reactive site surface density and possess the highest oxidizing ability in the series, as estimated by the DTT probe reaction, followed by CeO2 NM-211 and then titania nanomaterials (DT-51 and NM-101) and Fe3O4. DTT depletion for ZnO NM-110 was associated with dissolved zinc ions rather than the ZnO particles; however, the basic characteristics of the ZnO NM-110 particles were evidenced by methanol TPSR. These acellular assays allow ranking the eight nanomaterials into three categories with statistically different oxidative potentials: CuO, CuFe2O4 and Co3O4 are the most reactive; ceria exhibits a moderate reactivity; and iron oxide and the titanias possess a low oxidative potential.

Competitive adsorption of acetaminophen and caffeine onto activated Tingui biochar: characterization, modeling, and mechanisms

Tingui biochar (TB) activated with potassium hydroxide (TB-KOH) was synthesized in the present study. The adsorption capacity of TB-KOH was evaluated for the removal of acetaminophen and caffeine in monocomponent and bicomponent solutions. As a result, the study of the TB-KOH characterization as well as the adsorption kinetics, isotherm, thermodynamics, and a suggestion of the global adsorption mechanism are presented. TB-KOH was characterized through physical-chemical analysis to understand its surface morphology and how it contributes to the adsorption of these drugs. Furthermore, modelling using advanced statistical physical models was performed to describe how acetaminophen and caffeine molecules are adsorbed in the active sites of TB-KOH. Through the characterizations, it was observed that the activation with KOH contributed to the development of porosity and functional groups (-OH, C-O, and C = O) on the surface of TB. The monocomponent adsorption equilibrium was reached in 90 min with a maximum adsorption capacity of 424.7 and 350.8 mg g-1 for acetaminophen and caffeine, respectively. For the bicomponent solution adsorption, the maximum adsorption capacity was 199.4 and 297.5 mg g-1 for acetaminophen and caffeine, respectively. The isotherm data was best fitted to the Sips model, and the thermodynamic study indicated that acetaminophen removal was endothermic, while caffeine removal was exothermic. The mechanism of adsorption of acetaminophen and caffeine by TB-KOH was described by the involvement of hydrogen bonds and π-π interactions between the surface of TB-KOH and the molecules of the contaminants.

Drug Loading in Chitosan-Based Nanoparticles

Chitosan nanoparticles (CSNPs) are promising vehicles for targeted and controlled drug release. Recognized for their biodegradability, biocompatibility, low toxicity, and ease of production, CSNPs represent an effective approach to drug delivery. Encapsulating drugs within nanoparticles (NPs) provides numerous benefits compared to free drugs, such as increased bioavailability, minimized toxic side effects, improved delivery, and the incorporation of additional features like controlled release, imaging agents, targeted delivery, and combination therapies with multiple drugs. Keys parameters in nanomedicines are drug loading content and drug loading efficiency. Most current NP systems struggle with low drug loading, presenting a significant challenge to the field. This review summarizes recent research on developing CSNPs with high drug loading capacity, focusing on various synthesis strategies. It examines CSNP systems using different materials and drugs, providing details on their synthesis methods, drug loadings, encapsulation efficiencies, release profiles, stability, and applications in drug delivery. Additionally, the review discusses factors affecting drug loading, providing valuable guidelines for future CSNPs' development.

Study on the evaluation method of cigarette astringency in the simulated oral environment

Cigarettes with pronounced astringency can diminish consumers' enjoyment. However, due to the complex composition of cigarettes, quantifying astringency intensity accurately has been challenging. To address this, research was conducted to develop a method for assessing astringency intensity in a simulated oral environment. The astringency intensity of four cigarette brands was determined using the standard sensory evaluation method. The mainstream smoke absorbing solution (MS) was prepared by simulating the cigarette smoking process, and its physicochemical properties (such as total phenol content and pH levels) were analyzed. The lubrication properties of the five solutions were tested using the MFT-5000 wear tester, and factors influencing cigarette astringency were examined. The findings showed that total phenol content and pH of MS were positively and negatively correlated with astringency intensity, respectively. Particularly, the lubrication properties of MS were significantly correlated with astringency intensity, and the correlation coefficient was affected by load and speed during testing. The study concluded that coefficient of friction was a more reliable measure for assessing the extent of astringency in cigarettes than the total phenol content and pH of MS, offering new insights into astringency evaluation and development of high-grade cigarettes.

Fenton-like Degradation of Methylene Blue on Attapulgite Clay Composite by Loading of Iron-Oxide: Eco-Friendly Preparation and Its Catalytic Activity

The continuous discharge of organic dyes into freshwater resources poses a long-term hazard to aquatic life. The advanced oxidation Fenton process is a combo of adsorption and degradation of pollutants to detoxify toxic effluents, such as anti-bacterial drugs, antibiotics, and organic dyes. In this work, an activated attapulgite clay-loaded iron-oxide (A-ATP@Fe3O4) was produced using a two-step reaction, in which attapulgite serves as an enrichment matrix and Fe3O4 functions as the active degrading component. The maximum adsorption capacity (qt) was determined by assessing the effect of temperature, pH H2O2, and adsorbent. The results showed that the A-ATP@Fe3O4 achieves the highest removal rate of 99.6% under optimum conditions: 40 °C, pH = 3, H2O2 25 mM, and 0.1 g dosage of the composite. The dye removal procedure achieved adsorption and degradation equilibrium in 120 and 30 min, respectively, by following the same processes as the advanced oxidation approach. Catalytic activity, kinetics, and specified surface characteristics suggest that A-ATP@Fe3O4 is one of the most promising candidates for advanced oxidation-enrooted removal of organic dyes.

Cryo-Milled β-Glucan Nanoparticles for Oral Drug Delivery

Gemcitabine is a nucleoside analog effective against a number of cancers. However, it has an oral bioavailability of less than 10%, due to its high hydrophilicity and low permeability through the intestinal epithelium. Therefore, the aim of this project was to develop a novel nanoparticulate drug delivery system for the oral delivery of gemcitabine to improve its oral bioavailability. In this study, gemcitabine-loaded β-glucan NPs were fabricated using a film-casting method followed by a freezer-milling technique. As a result, the NPs showed a small particle size of 447.6 ± 14.2 nm, and a high drug entrapment efficiency of 64.3 ± 2.1%. By encapsulating gemcitabine into β-glucan NPs, a sustained drug release profile was obtained, and the anomalous diffusion release mechanism was analyzed, indicating that the drug release was governed by diffusion through the NP matrix as well as matrix erosion. The drug-loaded NPs had a greater ex vivo drug permeation through the porcine intestinal epithelial membrane compared to the plain drug solution. Cytotoxicity studies showed a safety profile of the β-glucan polymers, and the IC50s of drug solution and drug-loaded β-glucan NPs were calculated as 228.8 ± 31.2 ng·mL-1 and 306.1 ± 46.3 ng·mL-1, respectively. Additionally, the LD50 of BALB/c nude mice was determined as 204.17 mg/kg in the acute toxicity studies. Notably, pharmacokinetic studies showed that drug-loaded β-glucan NPs could achieve a 7.4-fold longer T1/2 and a 5.1-fold increase in oral bioavailability compared with plain drug solution. Finally, in vivo pharmacodynamic studies showed the promising capability of gemcitabine-loaded β-glucan NPs to inhibit the 4T1 breast tumor growth, with a 3.04- and 1.74-fold reduction compared to the untreated control and drug solution groups, respectively. In conclusion, the presented freezer-milled β-glucan NP system is a suitable drug delivery method for the oral delivery of gemcitabine and demonstrates a promising potential platform for oral chemotherapy.

Lignin derived hydrophobic deep eutectic solvents for the extraction of nanoplastics from water

As a growing concern in aqueous systems, micro- and nano-plastics, especially nanoplastics (NPs), have been widely detected in the environment and organisms, posing a potential threat to ecosystems and human health. Hydrophobic deep eutectic solvents (HDESs) have emerged as environmentally friendly solvents that have shown promise for extracting pollutants from water, either for detection or removal purposes. Herein, we investigated the extraction of polystyrene (PS) and polyethylene terephthalate (PET) NPs from aqueous solution using lignin based HDESs as sustainable solvents. Rapid extraction of both PET and PS NPs was observed with the high extraction efficiency achieved (> 95%). The extraction capacities for PET and PS could reach up to 525.877 mg/mL and 183.520 mg/mL, respectively, by the Thymol-2,6-dimethoxyphenol 1:2 HDES. Moreover, the extraction mechanism was studied using various techniques including Fourier-transform infrared analysis, contact angle measurements, molecular dynamics simulation, kinetics, and isotherm studies. This work lays a foundational basis for the future development of innovative HDES-based technologies in the detection and remediation of NPs as part of the grand challenge of plastic pollution.

Redox-Responsive Gold Nanoparticles Coated with Hyaluronic Acid and Folic Acid for Application in Targeting Anticancer Therapy

Methotrexate (MTX) has poor water solubility and low bioavailability, and cancer cells can become resistant to it, which limits its safe delivery to tumor sites and reduces its clinical efficacy. Herein, we developed novel redox-responsive hybrid nanoparticles (NPs) from hyaluronic acid (HA) and 3-mercaptopropionic acid (MPA)-coated gold NPs (gold@MPA NPs), which were further conjugated with folic acid (FA). The design of FA-HA-ss-gold NPs aimed at enhancing cellular uptake specifically in cancer cells using an active FA/HA dual targeting strategy for enhanced tumor eradication. MTX was successfully encapsulated into FA-HA-ss-gold NPs, with drug encapsulation efficiency (EE) as high as >98.7%. The physicochemical properties of the NPs were investigated in terms of size, surface charges, wavelength reflectance, and chemical bonds. MTX was released in a sustained manner in glutathione (GSH). The cellular uptake experiments showed effective uptake of FA-HA-ss-gold over HA-ss-gold NPs in the deep tumor. Moreover, the release studies provided strong evidence that FA-HA-ss-gold NPs serve as GSH-responsive carriers. In vitro, anti-tumor activity tests showed that FA-HA-ss-gold/MTX NPs exhibited significantly higher cytotoxic activity against both human cervical cancer (HeLa) cells and breast cancer (BT-20) cells compared to gold only and HA-ss-gold/MTX NPs while being safe for human embryonic kidney (HEK-293) cells. Therefore, this present study suggests that FA-HA-ss-gold NPs are promising active targeting hybrid nanocarriers that are stable, controllable, biocompatible, biodegradable, and with enhanced cancer cell targetability for the safe delivery of hydrophobic anticancer drugs.

Alginic acid-functionalized silver nanoparticles: A rapid monitoring tool for detecting the technology-critical element tellurium

The increasing global demand for tellurium, driven by its critical role in alloys, photovoltaic devices, and electronics, has raised concerns about its environmental pollution and neurotoxicity. In response, the potential of alginic acid (AA), a renewable, low-cost, and sustainable biopolymer, was explored for the biosynthesis of ultra-small silver nanoparticles (AgNPs) and their application in the detection of tellurium (Te(IV)). The effect of key synthesis parameters on desired physicochemical properties and yield of AgNPs was established to ensure high specificity and sensitivity towards Te(IV). The purified AgNPs with AA surface ligands were utilized to demonstrate a ratiometric absorbance sensor that exhibits excellent linearity and nanomolar-level affinity. This approach achieved a high correlation coefficient of ∼ 0.982, with a low detection limit of about 22 nM. Further investigations into the effect of pH, ionic strength, and organic molecules were conducted to elucidate detection performance and molecular understanding. The detection mechanism relies on the coordination between Te(IV) ions and the carboxylate groups of AA, which initiates aggregation-induced plasmon coupling in adjacent AgNPs. The capability of this analytical method to monitor Te(IV) in real-world water samples features its rapidity, user-friendliness, and suitability for point-of-care monitoring, making it a promising alternative to more complex techniques.

Two-Dimensional Amorphous Titanium Dioxide/Silver (TiO2/Ag) Nanosheets as a Surface-Enhanced Raman Spectroscopy Substrate for Highly Sensitive Detection

For the purpose of investigating the chemical enhancement of amorphous semiconductors as well as increasing the sensitivity of the surface-enhanced Raman spectroscopy (SERS) substrate, titanium dioxide (TiO2) precursors were calcined at different temperatures to generate crystallized TiO2 (c-TiO2) and amorphous TiO2 (a-TiO2) nanosheets, respectively. Afterward, a two-dimensional (2D) a-TiO2/Ag nanosheet SERS substrate was successfully fabricated using electrostatic interaction between a-TiO2 and Ag nanoparticles. In order to demonstrate a greater SERS sensitivity on a-TiO2/Ag compared to either c-TiO2 or Ag nanoparticles alone, the SERS probe molecules rhodamine 6G (R6G) and malachite green (MG) were utilized. Based on the results of SERS detections for probe molecules and contaminants, it demonstrates that a-TiO2/Ag nanosheets produce highly sensitive and repeatable Raman signals. The detectable concentration limits for R6G and MG were found to be 10-11 M and 10-10 M, respectively. And it has been determined that the system exhibits an enhancement factor (EF) of up to 1  ×  108. The limit of detection for 4-mercaptobenzoic acid and alizarin red can both reach 1  ×  10-8. Furthermore, a finite-difference time-domain simulation is performed in order to evaluate the magnetic field strength generated by Ag nanoparticles. As a result of the simulation, it is evident that the actual EF is smaller than the calculated one, leading support to the view that a-TiO2 nanosheets have a beneficial effect on the chemical enhancement of SERS.

Preparation and characterization of Antarctic krill oil/quercetin co-loaded liposomes and their protective effect on oleic acid-induced steatosis and oxidative stress in vitro

This study aims to introduce a new liposome to co-load Antarctic krill oil (AKO) and quercetin (QC) as a new delivery formulation to enrich the application of AKO and QC. The stability of liposomes could be increased by adding an appropriate quantity of soy lecithin (SL). Changes in the composition of the phospholipid membrane were strongly correlated with the stability and release capacity of loaded nutrients. SL2@QC/AKO-lips displayed a nearly spherical shape with higher oxidative stability and controlled the in vitro release performance of QC in simulated digestion. Moreover, in vitro studies indicated that new liposomes had no adverse effects on cell viability and could combine the physiological functions of AKO and QC to protect the HepG2 cells from oleic acid-induced steatosis and oxidative stress. The findings demonstrated that the AKO and QC co-loaded liposomes prepared with the addition of an appropriate quantity of SL had excellent loading efficiency of AKO/QC and good oxidative stability, security and functional activity.

Silver nanoparticle ecotoxicity and phytoremediation: a critical review of current research and future prospects

Silver nanoparticles (AgNPs) are widely used in various industries, including textiles, electronics, and biomedical fields, due to their unique optical, electronic, and antimicrobial properties. However, the extensive use of AgNPs has raised concerns about their potential ecotoxicity and adverse effects on the environment. AgNPs can enter the environment through different pathways, such as wastewater, surface runoff, and soil application and can interact with living organisms through adsorption, ingestion, and accumulation, causing toxicity and harm. The small size, high surface area-to-volume ratio, and ability to generate reactive oxygen species (ROS) make AgNPs particularly toxic. Various bioremediation strategies, such as phytoremediation, have been proposed to mitigate the toxic effects of AgNPs and minimize their impact on the environment. Further research is needed to improve these strategies and ensure their safety and efficacy in different environmental settings.

Liposome Nanocarriers Based on γ Oryzanol: Preparation, Characterization, and In Vivo Assessment of Toxicity and Antioxidant Activity

The present study aimed to develop and characterize liposome nanocarriers based on γ oryzanol and evaluate their potential in vitro and in vivo toxicity and antioxidant effects. The liposomes were physicochemically characterized using various techniques, including dynamic light scattering (DLS) for size and polydispersity index (PDI) measurements and ζ-potential analysis. The in vitro toxicity assessments were performed using hemolysis and MTT assays on the HS5 cell line. In vivo, acute oral toxicity was evaluated by using LD50 assays in mice. Additionally, antioxidant activity was assessed through biochemical analysis of serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) levels and liver tissue catalase, malondialdehyde (MDA), and glutathione (GSH) levels. The results revealed that the liposomes exhibited a uniform and spherical morphology with suitable physicochemical properties for drug delivery applications. The in vitro cytotoxicity and hemolysis assays and the in vivo LD50 experiment indicated the potential safety of γ oryzanol liposomes, especially at lower concentrations. In addition, the assessment of liver enzymes, i.e., ALT and AST, and the antioxidant markers further revealed the safety of the formulation, particularly for the liver as a highly sensitive soft organ. Overall, the liposome nanocarriers based on γ oryzanol were successfully formulated and expressed potential safety, supporting their application for the purposes of drug delivery and therapeutic interventions, particularly for hepatocellular and antioxidant therapies; however, further investigations for preclinical and clinical studies could be the future prospects for liposome nanocarriers based on γ oryzanol to explore the safety and efficacy of these nanocarriers in various disease models and clinical settings.

Enhancing Physicochemical Properties and Biocompatibility of Hollow Porous Iron Oxide Nanoparticles through Polymer-Based Surface Modifications

In this study, we synthesized hollow porous iron oxide nanoparticles (HPIONPs) with surface modifications using polymers, specifically chitosan (Chi), polyethylene glycol (PEG), and alginate (Alg), to improve colloidal stability and biocompatibility. For colloidal stability, Alg-coated HPIONPs maintained size stability up to 24 h, with only an 18% increase, while Chi, PEG, and uncoated HPIONPs showed larger size increases ranging from 64 to 140%. The biocompatibility of polymer-coated HPIONPs was evaluated by assessing their cell viability, genotoxicity, and hemocompatibility. Across tested concentrations from 6.25 to 100 μg/mL, both uncoated and polymer-coated HPIONPs showed minimal cytotoxicity against three normal cell lines: RAW264.7, 3T3-L1, and MCF10A, with cell viability exceeding 80% at the highest concentration. Notably, polymer-coated HPIONPs exhibited nongenotoxicity based on the micronucleus assay and showed hemocompatibility, with only 2-3% hemolysis in mouse blood, in contrast to uncoated HPIONPs which exhibited 4-5%. Furthermore, we evaluated the cytotoxicity of HPIONPs on MDA-MB-231 breast cancer cells after a 2 h exposure to a stationary magnetic field, and the results showed the highest cell death of 38 and 29% when treated with uncoated and polymer-coated HPIONPs at 100 μg/mL, respectively. This phenomenon is attributed to iron catalyzing the Fenton and Haber-Weiss reactions, leading to reactive oxygen species (ROS)-dependent cell death (r ≥ 0.98). In conclusion, the hydrothermal synthesis and subsequent surface modification of HPIONPs with polymers showed improved colloidal stability, nongenotoxicity, and hemocompatibility compared to uncoated HPIONPs while maintaining closely similar levels of cytotoxicity against both normal and cancer cells. This research has paved the way for further exploration of polymer coatings to enhance the overall performance and safety profile of magnetic nanoparticles in delivering anticancer drugs.

Nanoparticles and Their Antibacterial Application in Endodontics

Root canal treatment represents a significant challenge as current cleaning and disinfection methodologies fail to remove persistent bacterial biofilms within the intricate anatomical structures. Recently, the field of nanotechnology has emerged as a promising frontier with numerous biomedical applications. Among the most notable contributions of nanotechnology are nanoparticles, which possess antimicrobial, antifungal, and antiviral properties. Nanoparticles cause the destructuring of bacterial walls, increasing the permeability of the cell membrane, stimulating the generation of reactive oxygen species, and interrupting the replication of deoxyribonucleic acid through the controlled release of ions. Thus, they could revolutionize endodontics, obtaining superior results and guaranteeing a promising short- and long-term prognosis. Therefore, chitosan, silver, graphene, poly(lactic) co-glycolic acid, bioactive glass, mesoporous calcium silicate, hydroxyapatite, zirconia, glucose oxidase magnetic, copper, and zinc oxide nanoparticles in endodontic therapy have been investigated in the present review. The diversified antimicrobial mechanisms of action, the numerous applications, and the high degree of clinical safety could encourage the scientific community to adopt nanoparticles as potential drugs for the treatment of endodontic diseases, overcoming the limitations related to antibiotic resistance and eradication of the biofilm.

Novel Machine Learning-Based Method for Estimation of the Surface Area of Porous Silica Particles

This work reports a novel and quick method to estimate the surface area of porous materials. Conventionally, surface area measurement requires the BET method/N2 adsorption experiment which is time-consuming. In this work, we developed a method based on machine learning (ML) and the adsorption of a conductive dye on porous materials. The rate and quantity of dye adsorption, which is characterized by dynamic measurement of conductivity, provide an indirect measure of surface area and zeta potential. An ML-based soft sensor is developed to relate the measured conductivity profiles with surface area and zeta potential. A phenomenological model on dye adsorption is also developed, validated, and used to augment experimental data for training the soft sensor. The developed method was tested for porous silica particles with a range of surface areas (250-1100 m2/g) and zeta potential (-17 mV: -29 mV). The developed soft sensor was able to estimate the surface area and zeta potential quite well. The developed approach and method reduce overall measurement time for surface area from several hours to a few minutes. The method can potentially be implemented in continuous plants producing porous materials like silica.