Complexation of the antibiotic tetracycline with humic acid

A systematic review of antibiotics and antibiotic resistance genes (ARGs) in mariculture wastewater: Antibiotics removal by microalgal-bacterial symbiotic system (MBSS), ARGs characterization on the metagenomic

Antibiotic residues in mariculture wastewater seriously affect the aquatic environment. Antibiotic Resistance Genes (ARGs) produced under antibiotic stress flow through the environment and eventually enter the human body, seriously affecting human health. Microalgal-bacterial symbiotic system (MBSS) can remove antibiotics from mariculture and reduce the flow of ARGs into the environment. This review encapsulates the present scenario of mariculture wastewater, the removal mechanism of MBSS for antibiotics, and the biomolecular information under metagenomic assay. When confronted with antibiotics, there was a notable augmentation in the extracellular polymeric substances (EPS) content within MBSS, along with a concurrent elevation in the proportion of protein (PN) constituents within the EPS, which limits the entry of antibiotics into the cellular interior. Quorum sensing stimulates the microorganisms to produce biological responses (DNA synthesis - for adhesion) through signaling. Oxidative stress promotes gene expression (coupling, conjugation) to enhance horizontal gene transfer (HGT) in MBSS. The microbial community under metagenomic detection is dominated by aerobic bacteria in the bacterial-microalgal system. Compared to aerobic bacteria, anaerobic bacteria had the significant advantage of decreasing the distribution of ARGs. Overall, MBSS exhibits remarkable efficacy in mitigating the challenges posed by antibiotics and resistant genes from mariculture wastewater.

Significance of non-DLVO interactions on the co-transport of levofloxacin and titanium dioxide nanoparticles in porous media

With the application of engineered nanomaterials and antibiotics in the fields of medicine, aerospace, new energy and agriculture, the associated contamination is detected widely in soil-groundwater systems. It is of great scientific and practical significance to deeply explore the environmental interface process between nanoparticles and antibiotics for the scientific assessment of environmental fate and ecological environmental risks, as well as the development of new composite pollution control technologies. In this study, the co-transport behaviors of positively charged titanium dioxide nanoparticles (TiO2-NPs) and negatively charged levofloxacin (LEV) in quartz sand (QS) are investigated in this study. The results show that TiO2-NPs hardly flow out when transported alone in the column because of its positive charge, which creates a strong attraction with the negatively charged quartz sand on the surface. When TiO2-NPs co-migrate with LEV in porous media, the presence of LEV promotes the transport of TiO2-NPs, while the presence of TiO2-NPs inhibits LEV transport. Non-XDLVO interactions based on molecular dynamics (MD) simulations can help explain the observed promotion and inhibition phenomena as well as the correlation between TiO2-NPs and LEV. The results indicate that TiO2-LEV complexes or aggregates can be formed during the co-transportation process of TiO2-NPs and LEV in porous media. As flow velocity increases from 0.204 cm min-1 to 1.630 cm min-1, both the transport capacities of TiO2-NPs and LEV are enhanced significantly. Under the condition of high citric acid (CA) concentration (15 mmol L-1), the transport capacity of TiO2-NPs is slightly inhibited, while the transport capacity of LEV is enhanced. This study provides new insights into the transport of nanometallic oxides and antibiotics in porous media, which suggests that non-XDLVO interactions should be considered together when assessing the environmental risks and fate of nanometallic oxides and antibiotics in soil-groundwater systems.

When antibiotics encounter microplastics in aquatic environments: Interaction, combined toxicity, and risk assessments

Antibiotics and microplastics (MPs), known as emerging pollutants, are bound to coexist in aquatic environments due to their widespread distribution and prolonged persistence. To date, few systematic summaries are available for the interaction between MPs and antibiotics in aquatic ecosystems, and a comprehensive reanalysis of their combined toxicity is also needed. Based on the collected published data, we have analyzed the source and distribution of MPs and antibiotics in global aquatic environments, finding their coexistence occurs in a lot of study sites. Accordingly, the presence of MPs can directly alter the environmental behavior of antibiotics. The main influencing factors of interaction between antibiotics and MPs have been summarized in terms of the characteristics of MPs and antibiotics, as well as the environmental factors. Then, we have conducted a meta-analysis to evaluate the combined toxicity of antibiotics and MPs on aquatic organisms and the related toxicity indicators, suggesting a significant adverse effect on algae, and inapparent on fish and daphnia. Finally, the environmental risk assessments for antibiotics and MPs were discussed, but unfortunately the standardized methodology for the risk assessment of MPs is still challenging, let alone assessment for their combined toxicity. This review provides insights into the interactions and environment risks of antibiotics and MPs in the aquatic environment, and suggests perspectives for future research.

Distribution and ecological risk assessment of antibiotics in different freshwater aquaculture ponds in a typical agricultural plain, China

Freshwater aquaculture serves as a significant focal point for antibiotic contamination, yet understanding antibiotic distribution across different aquaculture models and stages remains limited. This study evaluated antibiotic pollution in three distinct freshwater aquaculture models: rice-crayfish coculture, fish aquaculture, and crab-crayfish aquaculture, during various aquaculture stages. Of the 33 target antibiotics, 16 antibiotics were detected, with the total concentrations ranging from 111.81 ng/L to 15,949.05 ng/L in water and 10.11 ng/g to 8986.30 ng/g in sediment. Among these antibiotics, erythromycin and lomefloxacin are prohibited for use in Chinese aquaculture. Dominant antibiotics in water included lincomycin, enrofloxacin, and enoxacin, whereas in sediment, oxytetracycline and erythromycin were predominant. Notably, lincomycin emerged as a dominant antibiotic in aquaculture for the first time. The concentrations of these dominant antibiotics were high compared to other aquaculture settings and exhibited elevated ecological risk. Critical periods for antibiotic contamination in water and sediment were found to be incongruent, occurring during the rainy season in July for water and the dry season in October for sediment. Notably, the rice-crayfish coculture model exerts a good effect in reducing antibiotic pollution. Overall, these findings offer valuable evidence for the healthful and sustainable advancement of aquaculture.

Enhanced sensitivity of extracellular antibiotic resistance genes (ARGs) to environmental concentrations of antibiotic

As emerging contaminants, antibiotics are frequently present in various environments, particularly rivers, albeit often at sublethal concentrations (ng/L∼μg/L). Assessing the risk associated with these low levels, which are far below the lethal threshold for most organisms, remains challenging. In this study, using microcosms containing planktonic bacteria and biofilm, we examined how antibiotic resistance genes (ARGs) in different physical states, including intracellular ARGs (iARGs) and extracellular ARGs (eARGs) responded to these low-level antibiotics. Our findings reveal a positive correlation between sub-lethal antibiotic exposure (ranging from 0.1 to 10 μg/L) and increased prevalence (measured as ARG copies/16s rDNA) of both iARGs and eARGs in planktonic bacteria. Notably, eARGs demonstrated greater sensitivity to antibiotic exposure compared to iARGs, with a lower threshold (0.1 μg/L for eARGs versus 1 μg/L for iARGs) for abundance increase. Moreover, ARGs in biofilms demonstrates higher sensitivity to antibiotic exposure compared to planktonic bacteria. To elucidate the underlying mechanisms, we established an integrated population dynamics-pharmacokinetics-pharmacodynamics (PD-PP) model. This model indicates that the enhanced sensitivity of eARGs is primarily driven by an increased potential for plasmid release from cells under low antibiotic concentrations. Furthermore, the accumulation of antibiotic in biofilms induces a greater sensitivity of ARG compared to the planktonic bacteria. This study provides a fresh perspective on the development of antibiotic resistance and offers an innovative approach for assessing the risk of sublethal antibiotic in the environment.

Investigation on humic substance and tetracycline interaction mechanism: biophysical and theoretical studies and assessing their effect on biological activity

Tetracycline (TC) is a widely used antibiotic, and evaluating its interaction with humic substances (HS) that act as a complexing agent in the environment is essential to understanding the availability of this contaminant in the environment. This study evaluated the interaction between HS and TC using different spectroscopic techniques, theoretical studies, and biological assays simulating environmental conditions. TC interacts with HS, preferably by electrostatic forces, with a binding constant of 9.2 × 103 M-1 (30 °C). This process induces conformational changes in the superstructure, preferably in the HS, like protein fraction. Besides, studies using the 8-anilino-1-naphthalene sulfonate (ANS) probe indicated that the antibiotic alters the hydrophobicity degree on HS's surface. Synchronized fluorescence shows that the TC interaction occurs preferentially with the protein-like fraction of soil organic matter (KSV = 26.28 ± 1.03 M-1). The TC epitope was evaluated by 1H NMR and varied according to the pH (4.8 and 9.0) of the medium, as well as the main forces responsible for the stabilization of the HS-TC complex. The molecular docking studies showed that the formation of the HS-TC complex is carried out spontaneously (ΔG = -7.1 kcal mol-1) and is stabilized by hydrogen bonds and electrostatic interactions, as observed in the experimental spectroscopic results. Finally, biological assays indicated that HS influenced the antimicrobial activity of TC. Thus, this study contributed to understanding the dynamics and distribution of TC in the environment and HS's potential in the remediation of antibiotics of this class in natural systems, as these can have adverse effects on ecosystems and human health.

The role of magnesium ion in the interactions between humic acid and tetracycline in solution

Coexisting tetracycline (TC), dissolved organic matter (DOM), and metal cations in aqueous environments might form complexes and consequently affect the environmental fate of TC. In this study, the interactions among coexisting humic acid (HA), TC, and Mg(II) in solutions were investigated by equilibrium dialysis batch experiments and nuclear magnetic resonance hydrogen spectroscopy (1H NMR) characterization. In the binary systems, the dimethylamine (4Me2NH+) functional group on the A-ring of TC bound to the oxygen-containing functional groups of HA via hydrogen bond. The solution pH affected the agglomeration morphology and dissociation of the oxygen-containing functional groups of HA as well as protonation and spatial conformation of TC, which in turn affected the HA-TC interactions. The complexation sites and ratio of Mg(II) on TC affect the binding mode in the ternary system. When the TC-Mg(II) complexation ratio is 1:1, the B, C, and D rings of TC preferentially complex with Mg(II), resulting in the change of TC from an extended to a twisted conformation. At this time, Mg(II) had a weaker inhibitory effect on binding affinity between HA and TC. When the complexation ratio was 1:2, the second Mg(II) complexation deactivated the 4Me2NH + on the A ring and further stabilized TC twisted conformation, resulting in a stronger inhibitory effect on the binding of TC to HA. Under acidic conditions, the solution pH mainly caused the difficulty in forming TC-Mg(II) complexes. The inhibitory effect of Mg(II) on the binding between HA and TC is weaker than that under alkaline conditions.

Tetracycline adsorption/desorption by raw and activated Tunisian clays

Clay-based adsorbents have applications in environmental remediation, particularly in the removal of emerging pollutants such as antibiotics. Taking that into account, we studied the adsorption/desorption process of tetracycline (TC) using three raw and acid- or base-activated clays (AM, HJ1 and HJ2) collected, respectively, from Aleg (Mazzouna), El Haria (Jebess, Maknessy), and Chouabine (Jebess, Maknessy) formations, located in the Maknessy-Mazzouna basin, center-western of Tunisia. The main physicochemical properties of the clays were determined using standard procedures, where the studied clays presented a basic pH (8.39-9.08) and a high electrical conductivity (446-495 dS m-1). Their organic matter contents were also high (14-20%), as well as the values of the effective cation exchange capacity (80.65-97.45 cmolckg-1). In the exchange complex, the predominant cations were Na and Ca, in the case of clays HJ1 and AM, while Mg and Ca were dominant in the HJ2 clay. The sorption experimental setup consisted in performing batch tests, using 0.5 g of each clay sample, adding the selected TC concentrations, then carrying out quantification of the antibiotic by means of HPL-UV equipment. Raw clays showed high adsorption potential for TC (close to 100%) and very low desorption (generally less than 5%). This high adsorption capacity was also present in the clays after being activated with acid or base, allowing them to adsorb TC in a rather irreversible way for a wide range of pH (3.3-10) and electrical conductivity values (3.03-495 dS m-1). Adsorption experimental data were studied as regards their fitting to the Freundlich, Langmuir, Linear and Sips isotherms, being the Sips model the most appropriate to explain the adsorption of TC in these clays (natural or activated). These results could help to improve the overall knowledge on the application of new low-cost methods, using clay based adsorbents, to reduce risks due to emerging pollutants (and specifically TC) affecting the environment.

Porous polymer monolithic columns to investigate the interaction of humic substances with herbicides and emerging pollutants by affinity chromatography

BACKGROUND

Understanding the interaction mechanisms and the relevant binding constants between humic acids and emerging or regulated pollutants is of utmost importance in predicting their geochemical mobility, bioavailability, and degradation. Fluorescence spectroscopy, UV-vis spectroscopy, equilibrium dialysis, and solid-phase extraction combined with liquid chromatography-mass spectrometry have been employed to elucidate interactions of humic acids with organic micropollutants, especially pharmaceutical drugs. These methods demand large sample volumes, long equilibration times, and laborious extraction steps which may imply analytical errors. Monolithic high-performance affinity chromatography is an alternative and simpler method to investigate these interactions and determine the binding constants.

RESULTS

Polymer monoliths based on aminated glycidyl methacrylate and ethylene glycol dimethacrylate served to immobilize Cu(II) and then humic acid to produce monolithic affinity chromatography columns with humic acid as the active interaction phase. About 86.5 mg of humic acid was immobilized per gram of polymer. The columns enabled a comparison of the binding strength of humic acid with herbicides and emerging pollutants at 25 °C and pH 6.0 ± 0.1. Paracetamol, acetylsalicylic acid, and salicylic acid did not retain. Among the compounds that interacted with humic acid, the order of increasing affinity, estimated by the global affinity constant (nKa) or partition coefficient (KD) was: caffeine < simazine < atrazine ∼ propazine < benzophenone. The nKa (L mol-1) values ranged from (4.9 ± 0.3) × 102 for caffeine to (1.9 ± 0.3) × 103 for benzophenone, whereas KD (L kg-1) varied from 14 ± 1 to 56 ± 8 for the same compounds.

SIGNIFICANCE AND NOVELTY

To our knowledge, this is the first paper demonstrating the use of a monolithic platform to immobilize supramolecular structures of humic acids exploiting immobilized metal affinity to comparatively evaluate their affinity towards emerging pollutants exploiting the concepts of high-performance affinity chromatography. The proposed approach needs only small amounts of humic acid, which is a relevant feature in preparing columns with humic substances isolated and purified from remote areas.

Precursor-oriented design of nano-alumina for efficient removal of antibiotics

Rapid and efficient removal of environmental antibiotics is vital to curb bacterial resistance. Through rational precursors-oriented design, we attain the best Al2O3 absorbent by 500 °C calcination of ammonium aluminium carbonate hydroxide (AACH) precursor from NH4HCO3 route (AACH-NH4HCO3-500) for fast and efficient removal of tetracycline (TC) and other antibiotics from environmental waters including high-salinity wastewater. AACH-NH4HCO3-500 (0.25 g·L-1) can remove (69.92 ± 1.78)% of aqueous TC (0.025 g·L-1) within 5 min and (97.62 ± 2.75)% within 2 h, and the adsorption capacity is 444.4 mg·g-1, which is the highest qmax of TC for the 2 h-adsorptions among numerous adsorbents. AACH-NH4HCO3-500 has fine tolerance to the coexisting substances, and can be easily regenerated and reused, and has no harm even discarded. The relations among the synthetic methods, the structural features, and the adsorption functions of Al2O3 are disclosed through a systematic comparison of the commercial Al2O3 and different Al2O3 nanomaterials attained from three precursors produced by five different routes. The reasons behind the exceptional adsorption performance are discussed throughout. Our findings would facilitate the development of excellent adsorbents for removal of other pollutants.

Investigating the different transformations of tetracycline using birnessite under different reaction conditions and various humic acids

Prior studies have successfully used manganese oxides to facilitate the transformation of tetracycline in aqueous solution. To further understand the kinetic and the transformation pathway of tetracycline via birnessite (δ-MnO2) under different conditions, experiments were conducted at pH levels of 3, 6, and 9 in the presence or absence of Aldrich humic acid (ADHA). Tetracycline removal followed the pseudo-second-order reaction model in all investigated cases, and the removal efficiency (g mg-1 h -1) followed the following trend: pH 3 (0.45/0.27) > pH 6 (0.036/0.087) > pH 9 (0.036/0.103) in the absence/presence of ADHA. Liquid chromatography-mass spectrometry/mass spectrometry results identified five main transformation products at m/z 495, 477, 493, 459, and 415, produced by the transformation reactions, including hydration, oxidation, desaturation, and oxy reduction. Notably, in the presence of ADHA at pH 3, products with higher toxicity secondary (m/z 477 and 495) were reduced, while less toxicity products (m/z 459 and 415) were enhanced. The experiments utilizing tetracycline and δ-MnO2 with varied humic acids (HA) revealed that HA with high polar organic carbon groups, such as O-alkyl, exhibited higher removal efficiency at pH 6. This research offers the first comprehensive insights into the pathway transformations of tetracycline via δ-MnO2 under different pH conditions and HA types. For further understanding, future work should investigate the binding of HA, TTC, and/or Mn2+ and the oxidation capacity of MnO2 after the reaction to clarify Mn2+ elution mechanisms.

Influence by varying organic matter content and forms in suspended particulate matter: impacts on the adsorption of tetracycline and norfloxacin

Antibiotics are commonly detected in natural waters. The organic matter (OM) in suspended particulate matter (SPM) has a critical impact on the adsorption of antibiotics in water. We investigated the contribution of OM content and form to the adsorption of tetracycline (TC) and norfloxacin (NOR) in the SPM of Taihu Lake. To change the content and form of OM in SPM, the samples were subjected to pyrolysis at 505 ˚C and oxidization with H2O2, respectively. Combustion almost completely removed OM, while oxidation removed most of the OM and transformed the remaining OM. Regardless of whether the OM changed or not, the adsorption of NOR and TC by SPM was more in line with the pseudo-second-order kinetic model instead of pseudo-first-order. The fitting of the intraparticle diffusion model showed that the removal of OM had a certain degree of change in the adsorption process. The isothermal adsorption of TC in all samples was more in line with the Temkin model. The isothermal adsorption of NOR in the oxidized sample conformed to the Temkin model, while it conformed to the Langmuir model in the original sample and the sample removed OM via combustion. The adsorption capacity of SPM with almost complete removal of OM significantly decreased, while conversely, the adsorption capacity of SPM after oxidation increased. This indicates that both the content and form of OM affect the adsorption of antibiotics by SPM, and the form of OM has a greater impact. The contribution of OM to NOR adsorption was greater than that of TC. In conclusion, the results verify the importance of OM in adsorbing antibiotics onto SPM, which may provide basic data for antibiotic migration in surface water.

Influence of copper and aging on freely dissolved tetracycline concentration in soil

Copper (Cu) and tetracyclines (TCs) often coexist in agricultural soils because of the use of manures on farmland; however, the influence of Cu on the bioavailability of TCs is still unclear, especially for cases with aging Cu. The freely dissolved concentrations (FDCs) of TCs are believed to be directly related to their bioavailability. In the present study, the FDCs of TCs were determined using organic-diffusive gradients in thin films (o-DGT), and the influence of Cu on the FDCs of TCs in soils was evaluated. The results showed that the FDCs of tetracycline (TC), oxytetracycline (OTC), and chlortetracycline (CTC) were 0.11-0.93, 0.28-1.02, and 0.24-0.53 μg/kg in the CK groups (no Cu added) and accounted for 0.09-0.58, 0.10-1.40, and 0.05-1.19‰ of their total concentrations which ranged from 0.2 to 10.0 mg/kg for TC, OTC, and CTC, respectively. The co-contamination of Cu reduced the FDCs of TCs in most cases, and aging increased the influence of Cu. The presence of Cu resulted in a decrease in the TC FDC by 35.48-95.04% in aged soils and 3.42-87.19% in newly prepared soils. FTIR analysis revealed that aging facilitated the bonding of Cu to soil particles via Cu-O, and Cu bonded to groups such as hydroxyl groups (-OH) in TCs. Our results suggested that the presence of Cu might reduce the bioavailability of TCs, and aging would enhance these effects. This is helpful for the bioavailability analysis of TCs under co-contamination of heavy metals.

Application of the Aliivibrio fischeri bacterium bioassay for assessing single and mixture effects of antibiotics and copper

The Aliivibrio fischeri bioassay was successfully applied in order to evaluate the acute effect of sulfamethoxazole (SMX), ciprofloxacin (CIP), chlortetracycline (CTC) and copper (Cu), alone or in binary, ternary, and overall mixture. The toxicity results are reported in terms of both effective concentrations, which inhibited 50% of the bacterium bioluminescence (EC50%), and in Toxic Units (TUs). The TUs were compared with predicted values obtained using the Concentration Addition model (CA). Finally, the toxicity of water extracts from a soil contaminated by the three antibiotics (7 mg Kg-1 each) in the presence/absence of copper (30 mg Kg-1) was also evaluated. Copper was the most toxic chemical (EC50: 0.78 mg L-1), followed by CTC (EC50: 3.64 mg L-1), CIP (96 mg L-1) and SMX (196 mg L-1). Comparing the TU and CA values of the mixtures, additive effects were generally found. However, a synergic action was recorded in the case of the CIP+Cu co-presence and antagonistic effects in the case of CTC+Cu and the ternary mixture (containing each antibiotic at 0.7 mg L-1), were identified. Soil water extracts did not show any toxicity, demonstrating the buffering ability of the soil to immobilize these chemicals.

Pig manure-derived fulvic acid more strongly drives the fate of arsenic and antibiotic resistance genes in paddy soil

Antibiotic resistance genes (ARGs) can threaten the clean production of rice owing to continuous selective pressure in heavy metal-antibiotic co-contaminated paddy soils. As an important soil carbon reservoir, the role of humic substances from different types of manure in the regulation of soil ARGs remains unclear. In this study, fulvic acid (FA) and humic acid (HA) were extracted from pig manure (PM), cow dung (CD), and chicken manure (CM). The influence of their characteristics and doses on the fate of ARGs was investigated in arsenic (As)-antibiotic co-contaminated paddy soils. The release of As and degradation of antibiotics were promoted in 1% PM-FA treatment, with increases of 4.8%-5.6% and 8.3%-8.8% compared with CM-FA and CD-FA treatments, respectively. The coexistence of FA/HA, Fe, As, and antibiotics in soil pore water affected the environmental behavior of ARGs, with FA showing a more positive effect. Species including Bacillus, Geobacter, Desulfitobacterium, and Christensenellaceae_R-7_group were considered potential hosts of ARGs, and their resistance to co-contamination increased after the addition of FA. Membrane transport is a potential strategy for host bacteria of ARGs to cope with As-antibiotic complex pressure. These results demonstrate the coupling mechanisms of As, antibiotics, and ARGs regulated by different humic substances in co-contaminated paddy soils, which could support the clean production of rice in agricultural practice.

Animal production predominantly contributes to antibiotic profiles in the Yangtze River

Human-induced antibiotic pollution in the world's large rivers poses significant risk to riverine ecosystems, water quality, and human health. This study identified geophysical and socioeconomic factors driving antibiotic pollution in the Yangtze River by quantifying 83 target antibiotics in water and sediment samples collected in its 6300-km-long reach, followed by source apportionment and statistical modeling. Total antibiotic concentrations ranged between 2.05-111 ng/L in water samples and 0.57-57.9 ng/g in sediment samples, contributed predominantly by veterinary antibiotics, sulfonamides and tetracyclines, respectively. Antibiotic compositions were clustered according to three landform regions (plateau, mountain-basin-foothill, and plains), resulting from varying animal production practices (cattle, sheep, pig, poultry, and aquaculture) in the sub-basins. Population density, animal production, total nitrogen concentration, and river water temperature are directly associated with antibiotic concentrations in the water samples. This study revealed that the species and production of food animals are key determinants of the geographic distribution pattern of antibiotics in the Yangtze River. Therefore, effective strategies to mitigate antibiotic pollution in the Yangtze River should include proper management of antibiotic use and waste treatment in animal production.

Adsorption of oxytetracycline on subalpine meadow soil from Zoige Plateau, China: Effects of the coexisting Cu2

Subalpine meadow soil with high moisture and humus content is a unique soil type in the Zoige Plateau. Oxytetracycline and copper are common soil contaminants which interact to form compound pollution. Oxytetracycline's adsorption on natural subalpine meadow soil and its components (humin and the soil without iron and manganese oxides) was studied in the laboratory with and without the presence of Cu2+. The effects of temperature, pH and Cu2+ concentration were documented in batch experiments, allowing deduction of the main sorption mechanisms. The adsorption process had two phases: one rapid, taking place in the first 6 h, and another slower, reaching equilibrium at around 36 h. The adsorption kinetics were pseudo-second-order, and the adsorption isotherm conformed to the Langmuir model at 25 °C. Higher concentrations oxytetracycline increased the adsorption, but higher temperature did not. The presence of Cu2+ had no effect on the equilibrium time, but the amount and rate adsorbed were much greater with Cu2+ concentration increased (except for the soil without iron and manganese oxides). The amounts adsorbed with/without Cu2+ were in the order the humin from subalpine meadow soil (7621 and 7186 μg/g) > the subalpine meadow soil (7298 and 6925 μg/g) > the soil without iron and manganese oxides (7092 and 6862 μg/g), but the difference among those adsorbents was slight. It indicates that humin is a particularly important adsorbent in the subalpine meadow soil. The amount of oxytetracycline adsorbed was greatest at pH 5-9. In addition, Surface complexation through metal bridging was the most important sorption mechanism. Cu2+ and oxytetracycline formed positively-charged complex that was adsorbed and then formed a ternary complex "adsorbent-Cu(II)-oxytetracycline", in which Cu2+ acted as a bridge. These findings provide a good scientific basis for soil remediation, and for assessing environmental health risks.

Single and combined effect of tetracycline and polyethylene microplastics on two drought contrasting cultivars of Oryza sativa L. (Rice) under drought stress

Co-exposure of tetracycline (TC) and polyethylene microplastic (MP-PE) pollution might result in more intricate effects on rice growth and grain quality. In present study, two different rice cultivars of contrasting drought tolerance, Hanyou73 (H73, drought-resistant) and Quanyou280 (Q280, drought-sensitive) were grown on MP-PE and TC-contaminated soils under drought. It was found that drought stress had different influence on TC accumulation in the two rice cultivars. H73 accumulated more TC in leaves and grains without drought stress while Q280 accumulated more TC under drought stress. Furthermore, metabolomics results demonstrated that under drought stress, about 80% of metabolites in H73 and 95% in Q280 were down-regulated as compared to non-drought treatments. These findings provide insights into the effects of TC and MP-PE with and without drought stress on potential risks to rice growth and grain quality, which has implications on rice production and cultivar election under multiple-stress conditions.

Insights into the driving factors of vertical distribution of antibiotic resistance genes in long-term fertilized soils

The prevalence of antibiotic resistance genes (ARGs) in soils has aroused wide attention. However, the influence of long-term fertilization on the distribution of ARGs in different soil layers and its dominant drivers remain largely unknown. In this study, a total of 203 ARGs were analyzed in greenhouse vegetable soils (0-100 cm from a 13-year field experiment applied with different fertilizers (control, chemical fertilizer, organic manure, and mixed fertilizer). Compared with unfertilized and chemically fertilized soils, manure application significantly increased the abundance and alpha diversity of soil ARGs, where the assembly of ARG communities was strongly driven by stochastic processes. The distribution of ARGs was significantly driven by manure application within 60 cm, while it was insignificantly changed in soil below 60 cm under different fertilization regimes. The inter-correlations of ARGs with mobile genetic elements (MGEs) and microbiota were strengthened in manured soil, indicating manure application posed a higher risk for ARGs diffusion in subsurface soil. Bacteria abundance and MGEs directly influenced ARG abundance and composition, whereas soil depth and manure application indirectly influenced ARG abundance and composition by affecting antibiotics. These results strengthen our understanding of the long-term anthropogenic influence on the vertical distribution of soil ARGs and highlight the ecological risk of ARGs in subsurface soil induced by long-term manure application.

Direct toxicity of six antibiotics on soil bacterial communities affected by the addition of bio-adsorbents

Reducing the toxicity caused by antibiotics on bacterial communities in the soil is one of the great challenges of this century. For this, the effectiveness of amending the soil with different bioadsorbents such as crushed mussel shell (CMS), pine bark (PB) and biomass ash (BA), as well as combinations of them (CMS + PB and PB + BA) was studied at different doses (0 g kg^-1 to 48 g kg^-1). Soil samples were spiked, separately, with increasing doses (0-2000 mg kg^-1) of cefuroxime (CMX), amoxicillin (AMX), clarithromycin (CLA), azithromycin (AZI), ciprofloxacin (CIP) and trimethoprim (TMP). Their toxicity on bacterial growth was estimated using the tritium-labeled leucine (³H) incorporation method. Toxicity was observed to behave differently depending on the antibiotic family and bioadsorbent, although in different magnitude and at different doses. The toxicity of β-lactams (AMX and CXM) was reduced by up to 54% when the highest doses of bio-adsorbents were added due to the increase in pH (CMS and BA) and carbon (PB) contribution. Macrolides (CLA and AZI) showed slight toxicity in un-amended soil samples, which increased by up to 65% with the addition of the bio-adsorbents. The toxicity of CIP (a fluoroquinolone) increased with the dose of the bio-adsorbents, reaching up to 20% compared with the control. Finally, the toxicity of TMP (a diaminopyrimidine) slightly increased with the dose of bio-adsorbents. The by-products that increase soil pH are those that showed the highest increases of CLA, AZI, CIP and TMP toxicities. These results could help to prevent/reduce environmental pollution caused by different kinds of antibiotics, selecting the most appropriated bio-adsorbents and doses.

The efficient adsorption of tetracycline from aqueous solutions onto polymers with different N-vinylpyrrolidone contents: equilibrium, kinetic and dynamic adsorption

Extensive use of antibiotics in the world will cause potential risks to human health and ecosystems. The removal of these antibiotics has attracted much attention. Composite materials are growing attention for diverse pollutants separation and removal based on their specific functionality and surface area. In this study, a series of N-vinylpyrrolidone-divinylbenzene polymers (NVPD) with different N-vinylpyrrolidone (NVP) contents were facilely prepared for the adsorption of tetracycline (TC). The effect of polymer surface properties and aqueous solution chemistry (pH, ionic strength, humic acid) on TC adsorption was further studied. The dynamic adsorption and regeneration experiments were also assessed. The results showed that only 25% of NVP was involved in the reaction. When NVP dosage (%) was 75%, polymer (NVPD-g) owned the largest BET surface area (613.23 m2/g) and obtained the maximum TC adsorption capacities (258.76 mg/g). In the kinetic, the adsorption between TC and polymers with NVP was controlled by chemical adsorption and intra-particle diffusion. The TC adsorption process of NVPD-g depended on the contribution of the hydrophobic effect, electrostatic interactions, H-bonding, π-π electron donor-acceptor (EDA) interactions, and cation-π bonding. Moreover, the removal efficiency of TC by NVPD-g was enhanced in the presence of humic acid (HA) in the dynamic adsorption and 1197 BV (2394 mL) of TC simulated wastewater can be treated. These findings suggest that NVPD-g has a potential application in the purification of TC.

Preparation of entrapment-based microcolumns for analysis of drug-humic acid interactions by high-performance affinity chromatography

Reversible interactions between drugs and humic acid in water can be an important factor in determining the bioavailability and effects of these pharmaceuticals as micropollutants in the environment. In this study, microcolumns containing entrapped humic acid were used in high-performance affinity chromatography (HPAC) to examine the binding of this agent with the drugs tetracycline, carbamazepine, ciprofloxacin, and norfloxacin. Parameters that were varied to optimize the entrapment of humic acid within HPLC-grade porous silica included the starting concentration of humic acid, the mass ratio of humic acid vs silica, and the method of mixing the reagents with the support for the entrapment process. The highest retention for the tested drugs was obtained when using supports that were prepared using an initial humic acid concentration of 80 mg mL^-1 and a humic acid vs silica mass ratio of 600 mg per g silica, along with preincubation of the humic acid with hydrazide-activated silica before the addition of a capping agent (i.e., oxidized glycogen). Characterization of the humic acid support was also carried out by means of TGA, FTIR, SEM, and energy-dispersive X-ray spectroscopy. The binding constants measured by HPAC for the given drugs with entrapped Aldrich humic acid gave good agreement with values reported in the literature under similar pH and temperature conditions for this and other forms of humic acid. Besides providing valuable data on the binding strength of various drugs with humic acid, this work illustrates how HPAC may be used as an analytical tool for screening and characterizing the interactions of drugs and man-made contaminants with humic acid or related binding agents in water and the environment.

Electrochemical properties of roots determine antibiotic adsorption on roots

The adsorption behaviors and transfer pathways of antibiotics in plant-soil system are greatly influenced by the electrochemical properties of both soil particles and plant roots. However, the effects of roots electrochemical properties on antibiotic adsorption are largely unknown. Here, the fresh soybean, maize, and wheat roots with different electrochemical properties were obtained from hydroponic cultivation, and the adsorption processes and mechanisms of doxycycline, tetracycline, sulfadiazine, and norfloxacin on roots under various environmental conditions were investigated. Results showed that the adsorption amount of antibiotics on roots increased with the initial concentration of antibiotics. The coexisting low-molecular weight organic acids and anions inhibited the antibiotic adsorption on roots. The soybean roots performed strong adsorption ability compared with the maize and wheat roots driven by the variations in root electrochemical properties. This study demonstrates the significance of electrochemical interactions between antibiotics and roots in plant-soil system and can contribute to the more accurate risk assessment and effective pollution control of antibiotics.

Structure, mechanism, and toxicity in antibiotics metal complexation: Recent advances and perspectives

Antibiotic-metal complexes (AMCs) formed by antibiotics and metal ions have attracted considerable attentions in recent years. Although different removal methods for AMCs have been reported in the literature, very few investigations have focused on the mechanisms and toxic effects of antibiotic-metal coordination. This review briefly describes the structural characteristics of various commonly used antibiotics and the coordination mechanisms with metal ions. Considering the complexity of the real environment, various environmental factors affecting AMC formation are highlighted. The effects of AMCs on microbial community structure and the role of metal ions in influencing resistant genes from the molecular perspective are of interest within this work. The toxicities and mechanisms of AMCs on different species of biota are also discussed. These findings underline the need for more targeted detection and analysis methods and more suitable toxicity markers to verify the combination of antibiotics with metal ions and reveal environmental toxicities in future. This review presents an innovative idea that antibiotics combined with metal ions will change the toxicity and environmental behavior of antibiotics.

Interaction of Antibiotics and Humic Substances: Environmental Consequences and Remediation Prospects

The occurrence and distribution of antibiotics in the environment has received increasing attention due to their potential adverse effects on human health and ecosystems. Humic substances (HS) influence the mobility, reactivity, and bioavailability of antibiotics in the environment significantly due to their interaction. As a result, HS can affect the dissemination of antibiotic-resistance genes, which is one of the main problems arising from contamination with antibiotics. The review provides quantitative data on the binding of HS with fluoroquinolones, macrolides, sulfonamides, and tetracyclines and reports the proposed mechanisms of their interaction. The main issues of the quantification of antibiotic-HS interaction are discussed, which are a development of standard approaches and the accumulation of a dataset using a standard methodology. This would allow the implementation of a meta-analysis of data to reveal the patterns of the binding of antibiotics to HS. Examples of successful development of humic-based sorbents for fluoroquinolone and tetracycline removal from environmental water systems or polluted wastewaters were given. Data on the various effects of HS on the dissemination of antibiotic-resistance genes (ARGs) were summarized. The detailed characterization of HS properties as a key point of assessing the environmental consequences of the formation of antibiotic-HS complexes, such as the dissemination of antibiotic resistance, was proposed.

Competitive adsorption and desorption of tetracycline and sulfadiazine in crop soils

In view of the environmental issues caused by antibiotics, this research studies competitive adsorption/desorption for tetracycline (TC) and sulfadiazine (SDZ) in agricultural soils. Competitive adsorption was studied in binary systems (adding equal concentrations of both antibiotics). In addition, it was compared with results from simple systems. In all cases, batch-type adsorption/desorption experiments were carried out. In the binary systems, for the highest antibiotic concentration added, adsorption percentages were always higher for TC (close to 100%) than for SDZ (10-90%). In these systems, TC desorption was lower than 5% for all soils, and generally <10% for SDZ. Comparing TC and SDZ adsorption for the different systems, SDZ was clearly affected by the presence of TC, with SDZ adsorption percentages being was much higher (with differences generally above 65%) in the binary than in the simple systems. On the contrary, comparing the results of TC adsorption in simple and binary systems, TC was not affected by the presence of SDZ, obtaining similar adsorption percentages in both systems. K_d and K_F values (in the Linear and Freundlich models), were higher in the simple systems in the case of TC, which could be due to competition with SDZ, while for SDZ K_d and K_F were higher in the binary systems, with a synergistic effect of TC favoring SDZ adsorption. Regarding desorption, it reached 100% for SDZ in some soils in simple systems, dropping to 10% in the presence of TC. TC desorption was <4%, not affected by SDZ. The results indicate that environmental risks would be higher for SDZ, showing differences when both antibiotics are present. This can be considered relevant as regards public health and environmental preservation, in view of direct toxicities and the promotion of resistance to antibiotics associated with the presence of these contaminants in the environment.

Characteristics of oxytetracycline stress-sensitive microbe-dissolved organic matter component interactions during composting

Dissolved organic matter (DOM) has important impacts on the transportation of antibiotics through chemical and biological processes in composting. The interaction between DOM and antibiotics is reciprocal. The interaction between DOM ligands and antibiotics could be characterized based on a technique combining parallel factor analysis (PARAFAC) and microbial community structure analysis. However, PARAFAC cannot reveal the dynamic changes in each DOM peak in one PARAFAC component under antibiotic stress. In this study, two-dimensional correlation spectroscopy (2DCOS) combined with PARAFAC and bacterial community diversity analyses were employed to reveal the effects of oxytetracycline (OTC) stress and the key microorganisms on the transformation of different fluorescent peaks from DOM PARAFAC components during chicken manure composting. The results showed that OTC inhibits the transformation between DOM PARAFAC components by inhibiting the core microbial activities involved in the transformation of DOM components. Protein-like components (C1 and C2) were more sensitive to OTC residue, and components with a high humification degree promoted the degradation of OTC. The interaction between special DOM PARAFAC components and certain bacteria affects the degradation of OTC. The DOM PARAFAC components A2(C1), B1(C2), B2(C2) and Z1(C4) enhanced OTC degradation by stimulating the genera Pseudomonas, Glycomyces and Hyphomicrobium. With these promising results, the true effect of DOM PARAFAC components on the degradation of OTC can be revealed, which is helpful for addressing antibiotic contamination to improve the bioavailability of compost products.

Occurrences, transport drivers, and risk assessments of antibiotics in typical oasis surface and groundwater

Intensive use of antibiotics affects biogeochemical cycles and stimulates the evolution of antibiotic resistance, thus threatening global health and social development. The spatiotemporal distributions of antibiotics in single aqueous matrices have been widely documented; however, their occurrence in surface-groundwater systems has received less attention, especially in arid regions that usually have fragile ecosystems. Therefore, we investigated the occurrence of thirty-one antibiotics in the surface water and adjacent groundwater in the Xinjiang Uygur Autonomous Region, China. The results showed that the total concentrations of detected antibiotics varied from 17.37 to 84.09 ng L^-1 and from 16.38 to 277.41 ng L^-1 in surface and groundwater, respectively. The median concentration of antibiotics showed the pattern of norfloxacin (4.86 ng L^-1) > ciprofloxacin (3.93 ng L^-1) > pefloxacin (3.39 ng L^-1) in surface water; whereas in groundwater, this was in the order of pefloxacin (6.30 ng L^-1) > norfloxacin (4.33 ng L^-1) > ciprofloxacin (2.68 ng L^-1). Heatmap analysis indicated that vertical infiltration had limited effects on antibiotic exchange in surface-ground water systems because of the high potential evaporation and low water storage. Redundancy analysis suggested that the oxidation-reduction potential (p < 0.01) and dissolved oxygen (p < 0.05) jointly affected the distribution of antibiotics in surface water. Ecological risk assessment showed that antibiotics in 98.9% of surface water and 99.1% of groundwater did not pose significant risks to aquatic species. The findings of this study will help develop effective mitigation strategies for antibiotics in aquatic environments.

Effect of Aging on the Adsorption of Tetracycline by Humic Acid: Insight into the Morphology and Chemical Composition

Tetracycline (TC) is a commonly used antibiotic and enters the soil environment continuously. As humic acid (HA) is one of the most important components in soils, it is necessary to investigate the adsorption behavior of TC by HA under different conditions. In this paper, the factor of “aging” was considered. The methodology of coating CaCO3 precipitation on the surface of HA was adopted to simulate the aging process. The adsorption kinetics and isotherm demonstrated that the uptake of TC over HA was quicker with more amount than aged HA, meaning that aging affected the mass transfer of TC from the bulk solution to the outer surface of HA as well as from HA outer surface to its interior pores. To explain the effect of aging, BET was utilized to characterize the morphology of HA and aged HA. It was found that aging resulted in a decrease in specific surface area and pore size. XPS, FTIR, and 2D-COS revealed how aging influenced the chemical composition of HA. Five kinds of functional groups carried by HA contributed to the adsorption of TC, in which the binding affinity towards TC followed the order of $-\text{COO}>\text{N}-\text{H}>-\text{C}-\text{C}>\text{C}-\text{O}>\text{O}-\text{H}$ . These results indicated that -COO was the most sensitive adsorption site. Compared to HA, the content of -COO for aged HA decreased obviously. In summary, aging affected the morphology and chemical position of HA and consequently lead to the change in adsorption kinetics and isotherm of TC.

Potential of low-cost bio-adsorbents to retain amoxicillin in contaminated water

Sewage sludge as agricultural amendment is the main route of human-medicine antibiotics to enter soils. When reaching environmental compartments, these compounds can cause significant risks to human and ecological health. Specifically, the antibiotic amoxicillin (AMX) is highly used in medicine, and the fact that more than 80% of the total ingested is excreted increases the chances of causing serious environmental and public health problems. As the use of low-cost bio-adsorbents could help to solve these issues, this research focuses on the retention of AMX onto four by-products of the forestry industry (eucalyptus leaf, pine bark, pine needles, and wood ash) and one from food industry (mussel shell). To carry out this study, batch-type tests were performed, where increasing concentrations of the antibiotic (0, 2.5, 5, 10, 20, 30, 40 and 50 μmol L^-1) were added to samples of 0.5 g of each bio-adsorbent. Eucalyptus leaf, pine needle and wood ash showed adsorption scores higher than 80%, while it was up to 39% and 48% for pine bark and mussel shell, respectively. For pine bark, wood ash and mussel shell, adsorption data showed good adjustment to the Freundlich and Linear models, while pine needles and eucalyptus leaf did not fit to any model. There was not desorption when the maximum concentration of AMX (50 μmol L^-1) was added. Overall, eucalyptus leaf, pine needles and wood ash can be considered good bio-adsorbents with high potential to retain AMX, which has significant implications regarding their eventual use to reduce risks of environmental pollution by this antibiotic.

Sorption of pharmaceuticals over microplastics' surfaces: interaction mechanisms and governing factors

Microplastics are one of the emerging and ubiquitous environmental pollutants. Recent studies have proven their co-existence with pharmaceuticals in the environment wherein microplastics act as a potential vector for the transportation of pharmaceuticals. Both microplastics and pharmaceuticals are charged moieties enriched with diverse functional groups resulting in the possibility of multiple interactions. Major interactions could be electrostatic, hydrogen bonding, and hydrophobic, while minor interactions may occur through π-π interaction, cationic bridging mechanism, van der Waals interaction, partition, and pore-filling mechanism. These interactions have both short- and long-term effects over pharmaceutical sorption on microplastics and possibly, ensuing toxicity. This review analyses and summarises the currently reported interactions between microplastic particles and pharmaceuticals as well as establishes the link to various factors affecting the process, viz. pH, salinity, dissolved organic matter, and physiochemical properties of microplastics.

Direct Z-scheme mediated SmVO4/UiO-66-NH2 heterojunction nanocomposite for the degradation of antibiotic tetracycline hydrochloride molecules under sunlight

The use of tetracycline hydrochloride (TCH) for veterinary, human therapy, and agriculture has risen in the past few decades, making it to become one of the most exploited antibiotics. However, TCH residue in the environment is causing issues related to the evolution of antibiotic-resistant bacteria. To address such a problem, photodegradation offers a potential solution to decompose these pollutants in wastewater and thereby mitigates negative environmental impacts. In this context, the research focuses on the use of the rare-earth metal oxide samarium orthovanadate (SmVO₄) with nanorod structure, coupled with UiO-66-NH₂ for the photocatalytic degradation. Their photocatalytic activity to degrade antibiotic TCH molecules is explored under simulated solar light irradiation. The integration of UiO-66-NH₂ with SmVO₄ enhanced the light absorption, recombination resistance, carrier lifetime (from 0.382 to 0.411 ns) and specific surface area (from 67.17 to 246 m²/g) of the composite system as confirmed from multiple analyses. The obtained results further indicated that SmVO₄/UiO-66-NH₂ nanocomposites could form a direct Z-scheme based heterojunction. Such mechanism of charge transfer leads to the effective degradation of TCH molecules up to 50% in 90 min under solar light, while it is degraded only 30% in the case of bare-SmVO₄ nanorods. In this work, the incorporation of UiO-66-NH₂ positively influences photoelectrochemical properties and improves the overall photoredox properties of SmVO₄ for the degradation of complex compounds like antibiotic TCH molecules. Therefore, UiO-66-NH₂ can be proposed as an effective material to sensitize the rare-earth based photocatalytic material.

Distribution and ecological risks of pharmaceuticals and personal care products with different anthropogenic stresses in a coastal watershed of China

The occurrences of pharmaceutical and personal care products (PPCPs) in both freshwater and sea have been widely reported. However, pollution control requires further information on riverine discharges with influence of land-based activities and associated risks to estuarine ecosystems. This study investigated the spatial occurrences and the relationship to sociodemographic parameters of 30 PPCPs in 67 rivers along the Bohai coastal region. The results showed that PPCPs were mainly deposited in aquatic phase, and the partitioning coefficient between water and sediment was highly determined by chemical properties. The levels of 30 PPCPs in rivers ranged from 8.33 to 894.48 ng/L, showing a large variance among regions. Caffeine, sulfamethoxazole, sulfamethazine, ofloxacin, anhydro-erythromycin, and trimethoprim were found to be the major pollutants. Multivariable analysis method was used to assess the correlation of PPCPs markers to socio-economic parameters. The results indicated that domestic emissions contributed most to the occurrences of PPCPs in the riverine water. Risk assessment result indicated that sulfamethoxazole, caffeine, tetracycline, and carbamazepine ranked top four with the highest risks to the most sensitive aquatic organisms. The results identified caffeine and carbamazepine with high detection frequency and concentration as the priority chemicals, while sulfamethoxazole and erythromycin should also be concerned due to their potential threats in specific rivers. This study provides valuable information for pollution control over PPCPs riverine discharges in estuarine regions.

A Fast Adsorption of Azithromycin on Waste-Product-Derived Graphene Oxide Induced by H-Bonding and Electrostatic Interactions

Graphene oxide (GO) was prepared from the graphite electrode of waste dry cells, and the application of the prepared GO as a potential adsorbent for rapid and effective removal of an antibiotic, azithromycin (AZM), has been investigated. The synthesis process of GO is very simple, cost-effective, and eco-friendly. As-prepared GO is characterized by field-emission scanning electron microscopy, energy-dispersive X-ray, transmission electron microscopy, X-ray diffractometry, Fourier transform infrared spectroscopy, elemental analysis, Brunauer-Emmett-Teller sorptometry, and zeta potential analysis. The obtained GO has been employed for removal of the widely used AZM antibiotic from an aqueous solution. The quantitative analysis of AZM before and after adsorption has been carried out by liquid chromatography tandem mass spectrometry. The adsorption of AZM by GO was performed in a batch of experiments where the effects of adsorbent (GO) dose, solution pH, temperature, and contact time were investigated. Under optimum conditions (pH = 7.0, contact time = 15 min, and adsorbent dose = 0.25 g/L), 98.8% AZM was removed from the aqueous solution. The rapid and effective removal of AZM was significantly controlled by the electrostatic attractions and hydrogen bonding on the surface of GO. Adsorption isotherms of AZM onto GO were fitted well with the Freundlich isotherm model, while the kinetic data were fitted perfectly with the pseudo-second order. Therefore, the simple, cost-effective, and eco-friendly synthesis of GO from waste material could be applicable to fabricate an effective and promising low-cost adsorbent for removal of AZM from aqueous media.

Effective Removal of Tetracycline from Water Using Copper Alginate @ Graphene Oxide with In-Situ Grown MOF-525 Composite: Synthesis, Characterization and Adsorption Mechanisms

For nanomaterials, such as GO and MOF-525, aggregation is the main reason limiting their adsorption performance. In this research, Alg-Cu@GO@MOF-525 was successfully synthesized by in-situ growth of MOF-525 on Alg-Cu@GO. By dispersing graphene oxide (GO) with copper alginate (Alg-Cu) with three-dimensional structure, MOF-525 was in-situ grown to reduce aggregation. The measured specific surface area of Alg-Cu@GO@MOF-525 was as high as 807.30 m²·g^-1, which is very favorable for adsorption. The synthesized material has affinity for a variety of pollutants, and its adsorption performance is significantly enhanced. In particular, tetracycline (TC) was selected as the target pollutant to study the adsorption behavior. The strong acid environment inhibited the adsorption, and the removal percentage reached 96.6% when pH was neutral. Temperature promoted the adsorption process, and 318 K adsorption performance was the best under experimental conditions. Meanwhile, 54.6% of TC could be removed in 38 min, and the maximum adsorption capacity reached 533 mg·g^-1, far higher than that of conventional adsorption materials. Kinetics and isotherms analysis show that the adsorption process accords with Sips model and pseudo-second-order model. Thermodynamic study further shows that the chemisorption is spontaneous and exothermic. In addition, pore-filling, complexation, π-π stack, hydrogen bond and chemisorption are considered to be the causes of adsorption.

Interactions of microplastics and main pollutants and environmental behavior in soils

Microplastics (MPs) are emerging global contaminants, attracting more and more attention because of their difficulty in degradation, extensive and persistent pollution. In freshwater environment, especially in the ocean, they have become a global, public and even political research hotspot. However, the distribution, fate and ecological hazards of MPs in agricultural land and other soils have not been explored fully. Although the occurrence of MPs in different habitats has been reviewed at home and abroad, little attention has been paid to its environmental behavior, ecotoxicology and interaction with biological and chemical pollutants in soil. This review summaries the research progress on the source, accumulation, degradation and migration of MPs in soil, the potential risks of ecological environment and food chain. In order to provide theoretical basis and practical suggestions for related research and regulatory countermeasures, the detection and treatment methods and mechanism of microplastics in soil need to be further explored.

α and γ Alumina Spheres for Azo Dye (Allura Red) Removal from Aqueous Media

Allura red or Red 40 (R40) is a dye widely used in the food, textile, and pharmaceutical industries; it is considered dangerous because it is soluble in water, and it has high toxicity and resistance to natural degradation. Several advanced wastewater treatments have been shown to be effective for R40 removal but some of them present disadvantages such as by-products obtention, high energy consumption, and high cost of the reactants used in the removal process. In the present work, α-Alumina (Alu) and γ-Alu spheres were synthesized by the encapsulation method. The prepared spheres were characterized by FT-IR, XRD, SEM/EDS, and SBET, and it was determined the presence of only inorganic bonds from ceramic material, and the amorphous alumina was observed in spheres with a smooth and uniform surface and with pores. R40 adsorption kinetics and isotherms were performed, as well as material regeneration for consequent sorption cycles. Sorption tests for R40 removal were carried out under different conditions of initial concentration, pH value, and the presence of interfering ions. The maximal sorption capacity of the synthetized α- and γ-Alu spheres were situated between 0.1765 and 18.9865 mg/g. Different kinetic and isothermal equations were applied and finally, the experimental data was described by Elovich and Freundlich models. The γ-Alu spheres after five heat treatment regeneration cycles showed stable behavior and potential re-use in new sorption processes with R40 removal >97.7% at pH 3 and >85.6% at $C_0$  =10 mg/L. The obtained results showed that the γ-Alu spheres are novel, alternative, and sustainable synthesized materials for the advanced treatment of wastewater by adsorption process for the removal of Allura red azo dye in aqueous media.

Two-step pyrolysis biochar derived from agro-waste for antibiotics removal: Mechanisms and stability

This study used acetone washing biochar (BCA) and nitric-acid washing biochar (BCN) derived from bagasse to remove sulfamethoxazole (SMX) and tetracycline (TC) in water. Higher specific surface area (1119.53 m² g^-1) and graphitization degree can significantly improve decontamination efficacy, of which BCN has the highest SMX and TC sorption capacities (274.63 mg g^-1 and 353.85 mg g^-1). The kinetics, isotherms and characterization analysis indicated O-containing functional group complexation and π-π interaction were dominant mechanisms in the adsorption process. Adsorption stability experiment showed that BCA has better stability with the coexistence of anions and cations. Besides, the enhancement and competitive adsorption from the interaction between soluble organic matter and TC could facilitate TC decontamination. Therefore, bagasse biochar derived from agro-waste has a promising potential for antibiotic contaminants removal from multi-interference conditions and promotes the recycling of waste, thereby achieving harmony between materials and the ecological environment.

Interaction between organic matter and tetracycline in river sediments in cold regions

In this study, the interaction between river sediments collected from cold regions and typical antibiotics was investigated. The results show that tetracycline addition to the sediment can promote the fluorescence quenching of protein-like, marine humic acid, and humic acid-like substances. The degree of quenching increased with the increase of tetracycline concentration (0-80 μM). The fluorescence quenching degree of protein-like, marine humic acid, and humic acid-like substances is as high as 94.76%, 70.19%, and 77.80%, respectively. In addition, the process belongs to static quenching, and a ground-state complex is formed during the quenching reaction. The number of binding sites of tetracycline and protein-like, marine humic acid, and humic acid-like substances is 1.30, 1.51, and 1.34, respectively. The order of the strength of the formed complex is marine-like humic acid, protein-like, and humic acid-like substrates. The secondary structure of protein-like substrate in the sediment organic matter includes three types: aggregated strands, β-Sheet, and α-helix; and the content ratios are 10.23%, 8.33%, and 81.44%, respectively. When the concentration of tetracycline increased to 80 μM, the content of β-sheet increased significantly, while the content of α-helix decreased significantly. 2D-COS analysis showed that the reaction sequence of organic functional groups and tetracycline in the sediment was phenolic hydroxyl group, fatty group of amino acid structure, nonfluorescent polysaccharide, and protein-like α-helix substrates. After tetracycline interacts with water-extractable organic matters (WEOM), the structure of WEOM becomes compact, and its adsorption capacity on the surface of minerals is significantly reduced, resulting in an increase in the fluidity of tetracycline in the water environment.

Antibiotics in aquaculture ponds from Guilin, South of China: Occurrence, distribution, and health risk assessment

Antibiotics have been widely used to prevent or treat bacterial infections in aquaculture in the past decades. However, large proportions of these compounds are excreted unchanged in feces and urine of animals, given incomplete metabolism, leading to the residual of unmetabolized compounds, and posing a potential risk to the environment. This study investigated the occurrence and distribution of seven antibiotics in surface water, sediments, fish muscle, and fish feed by high-performance liquid chromatography from the aquaculture areas in Guilin, South of China. The highest concentrations of the target antibiotics in water, sediment, fish muscle, and fish feed were 2047.53 ng/L, 13.32 μg/kg, 35.90 μg/kg, and 2203.97 μg/kg, respectively. In contrast, the most abundant antibiotic was enrofloxacin (ENR), followed by ofloxacin (OFL), sulfadimidine (SMZ), and ciprofloxacin (CIP). In this work, the concentrations of antibiotics were lower than those in other breeding areas. Correlation analyses showed significant relationships between sulfadiazine (SDZ) and TP, TN, and COD_Cr in water. In sediment, the release of SDZ was significantly related to TN, TP, and organic matter. The risk quotient (RQ) results revealed that sulfamethoxazole (SMX), CIP, and ENR were at high risk to microorganisms in water; while, SMX and NOR were at high risk in sediments. The result from the estimated daily intakes (health risk quotient, HQ < 1) suggested that the antibiotics might not pose a risk to human health by dietary exposure assessment; however, sediments may become an accumulation reservoir of antibiotics and cause secondary pollution, of which the local management should raise awareness.

Determination of 38 antibiotics in raw and treated wastewater from swine farms using liquid chromatography-mass spectrometry

The present study firstly aimed at developing a multi-residue method to identify and quantify 38 veterinary antibiotics (belonging to 5 different classes) not only for raw swine wastewater but also for wastewater different treated by different units. The proposed method is based on a solid-phase extraction procedure and ultra-performance liquid chromatography with mass spectrometry. For sample preparation, the optimal loading sample volume was selected as 50 mL, whose pH was adjusted to approximately 3.0 using formic acid. Then 0.1 g/L ethylenediamine tetraacetic acid disodium salt was added. The recovery rates for different types of wastewaters were in the range of 35.94%-124.51% and the relative standard deviations were in the range of 0.36%-14.62%. All the matrix standard curves exhibited high linearity (0.9956-0.9999). The matrix effects for the target antibiotics ranged from -61.73% to +148.75%. To ensure practicality of the method, we performed the detection of the actual added concentration to determine method detection limits and quantitation limits. The quantitation limits of most of the target antibiotics were 0.04 μg/L, except for spiramycin (0.1 μg/L) and roxithromycin (0.2 μg/L). This optimized and validated method was applied to analyze antibiotic residues in swine water samples from 4 swine farms. This article is protected by copyright. All rights reserved.

Dynamics of antibiotics and antibiotic resistance genes in four types of kitchen waste composting processes

Kitchen waste might be a potential source of antibiotics and antibiotic resistance genes. Composting is recognized as an effective way for kitchen waste disposal. However, the effects of different kitchen waste composting types on the removal of antibiotics and antibiotic resistance genes haven't been systematically studied. In this study, the dynamics of antibiotics and antibiotic resistance genes from kitchen waste of four composting processes were compared. Results showed that although kitchen waste was composted, it remained an underestimated source of antibiotics (25.9-207.3 μg/kg dry weight) and antibiotic resistance genes (10¹²-10¹⁷ copies/kg dry weight). Dynamic composting processes (i.e., dynamic pile composting and mechanical composting) decreased the antibiotic removal efficiency and increased the abundance of some antibiotic resistance genes (5.35-8534.7% enrichment). Partial least-squares path model analysis showed that mobile genetic elements played a dominant role in driving antibiotic resistance genes dynamics. Furthermore, redundancy analysis revealed that temperature, pH, and water content considerably affected the removal of antibiotics and mobile genetic elements. This study provides further insights into exploring the effective strategies in minimizing the risk of antibiotic resistance from kitchen waste via composting process.

Insights into the molecular mechanism of tetracycline transport in saturated porous media affected by low-molecular-weight organic acids: Role of the functional groups and molecular size

The transport of tetracycline possessed a great challenge in its environmental applications. This study looked at how various low-molecular-weight organic acids (LMWOAs) affect the transport of tetracycline in environments. To that end, four LMWOAs were employed in experiments; acetic acid, malonic acid, malic acid, and citric acid. It was observed that LMWOAs promoted the tetracycline passage in presence of various experimental environments. The LMWOAs steric hindrance and deposition competition facilitated tetracycline transport at pH 5.0. The other deposition mechanism for tetracycline was the electrostatic repulsion between tetracycline and sand enhanced by deprotonated LMWOAs at pH 7.0. Moreover, the enhanced effects of LMWOAs on tetracycline mobility were intensively dependent on LMWOA type with more functional groups (e.g. carboxyl and hydroxyl groups) and larger molecular size supported stronger deposition competition, steric hindrance as well as electrostatic repulsion. Additionally, cation-bridging played a vital role for the enhanced effects of LMWOAs on tetracycline transport with divalent cations (e.g., Ca²⁺ and Pb²⁺). Interestingly, tetracycline exhibited a higher mobility in the presence of Ca²⁺ relative to Pb²⁺ regardless of LMWOAs-free or LMWOAs-addition. This phenomenon was attributed to the fact that Pb²⁺ has a greater affinity with tetracycline and LMWOAs than Ca²⁺. Furthermore, under the shadow of numerous LMWOAs, the non-equilibrium two site transportation model was employed to investigate the movement of tetracycline in porous saturated media. The present study suggests that LMWOAs may be important considerations in assessing the antibiotic passage in soil as well as groundwater.

Interaction of Microplastics with Antibiotics in Aquatic Environment: Distribution, Adsorption, and Toxicity

As two major types of pollutants of emerging concerns, microplastics (MPs) and antibiotics (ATs) coexist in aquatic environments, and their interactions are a source of increasing concern. Therefore, this work examines the interaction mechanisms of MPs and ATs, and the effect of MPs on ATs bioavailability and antibiotic resistance genes (ARGs) abundance in aquatic environments. First, the mechanisms for ATs adsorption on MPs are summarized, mainly including hydrophobic, hydrogen-bonding, and electrostatic interactions. But other possible mechanisms, such as halogen bonding, CH/π interaction, cation-π interaction, and negative charge-assisted hydrogen bonds, are newly proposed to explain the observed ATs adsorption. Additionally, environmental factors (such as pH, ionic strength, dissolved organic matters, minerals, and aging conditions) affecting ATs adsorption by MPs are specifically discussed. Moreover, MPs could change the bioaccumulation and toxicity of ATs to aquatic organisms, and the related mechanisms on the joint effect are reviewed and analyzed. Furthermore, MPs can enrich ARGs from the surrounding environment, and the effect of MPs on ARGs abundance is evaluated. Finally, research challenges and perspectives for MPs-ATs interactions and related environmental implications are presented. This review will facilitate a better understanding of the environmental fate and risk of both MPs and ATs.

Quantification of DOM effects on tetracyclines transport during struvite recovery from swine wastewater

Struvite (MgNH₄PO₄·6H₂O) recovered from livestock wastewater may impose a pharmacological threat to the environment, due to the extensive existence of antibiotics in the wastewater. In this study, tetracyclines (TCs) were selected as the typical antibiotics, and the individual processes of dissolved organic matters (DOM) evolution and their effects on TCs migration in struvite recovery from swine wastewater were discriminated and quantified. Results revealed that TCs transport was contributed by the adsorption of pure struvite crystals, struvite adsorbing DOM-TCs complex and DOM aggregation, which occupied 2.29-6.53%, 23.53-34.66%, and 59.09-74.19% of the total TCs migration amounts, respectively. A tangential flow filtration system was employed to divide DOM into five fractional parts on the basis of molecular weight cut-offs. Experimental results indicated that under alkaline conditions of struvite crystallization, DOMs with larger molecular weights, hydrolyzed to DOMs with smaller molecular weights, which consequently promoted TCs re-distribution in DOMs from higher molecular weights to those with lower molecular weights. Furthermore, a distribution model was developed to characterize TCs transport in struvite recovery by describing TCs distribution among various phases, including struvite adsorption, DOM-TCs complexing, DOM aggregation, and free state in the solution, respectively. These outcomes provided new understanding on DOM evolution and effects on antibiotics transport in phosphate recovery from wastewater.

Effects of coexistence of tetracycline, copper and microplastics on the fate of antibiotic resistance genes in manured soil

The coexistence of antibiotics, heavy metals and microplastics is becoming commonplace and may affect antibiotic resistance in manured soil. The current understanding of the role of microplastics in soil with combined pollution of antibiotics, heavy metals and antibiotic resistance genes (ARGs) is limited. Here, the effects of the coexistence of tetracycline (TC), Cu and environmental microplastics (EM) on the fate of nine ARGs and three heavy metal resistance genes in agricultural soil were investigated by batch and microcosm experiments. EM were obtained by exposing virgin microplastics to soil environments for 80 days, which exhibited higher adsorption affinity for Cu and TC than soil particles and virgin microplastics. 1% EM in soil increased bioavailable concentrations of TC and Cu by 79-138% and 88-135%, respectively, and decreased TC dissipation from 11.79 mg kg^-1 to 3.08 mg kg^-1. Correspondingly, the total relative abundances of target ARGs increased by 219-348%. The significant correlations of tetG, tetB, tetQ, sul2, sul1 and intl1 with bioavailable fractions of TC and Cu in soil environments were revealed by network analysis. Moreover, scanning electron micrographs showed the special plastisphere around EM. Attributed to the biofilm generation and higher pollutant accumulation in the plastisphere, EM could be the source of antibiotic-resistant bacteria and ARGs in soil environments. Structure equation models further identified that indirect effects of EM acted a major role in the propagation of ARGs by altering soil properties, soil microbial diversity and intl1 abundance. This study revealed that EM could increase the stimulative effects of Cu and TC on antibiotic resistance and magnify the environmental risk of manure application in soil environments.

Adsorption characteristics of tetracycline onto particulate polyethylene in dilute aqueous solutions

The presence of ultrafine plastics particles and its potential to concentrate and transport organic contaminants in aquatic environments have become a major concern in recent years. Specifically, the uptake of hazardous chemicals by plastics particles may affect the distribution and bioavailability of the chemicals. In this study, the adsorption of tetracycline (TC), an antibiotic frequently found in aquatic environments, on high-density polyethylene (PE) particles with the average size of 45 μm, was investigated. The PE particles were characterized for surface acidity for the first time. Results showed that pH controls the surface charge of PE particles. TC adsorption onto PE particles was rapid as expected following the pseudo-second-order rate law (r² > 0.99). Polar forces in addition to specific chemical interactions, such as hydrogen bonding and hydrophophilicity controlled TC adsorption onto PE particles. Parameters, including pH, dissolved organic matter, ionic strength, major cations and anions affected TC adsorption onto PE micro-particles. Results indicated that PE particles can function as a carrier of antibiotics in the aquatic environment, which potentially imposes ecosystem and human health risks.