Plastic breeze: Volatile organic compounds (VOCs) emitted by degrading macro- and microplastics analyzed by selected ion flow-tube mass spectrometry

Impacts of microplastics on reef-building corals: Disentangling the contribution of the chain scission products released by weathering

Microplastics (MPs) have recently been shown to impact the health of corals negatively. The primary effects are linked to the physical interaction of the particles with coral tissues, such as abrasion that causes wounds. Additionally, MPs can leach contaminants into the seawater, not only the formulation additives but also molecular fragments resulting from the photo-oxidative degradation of the plastic polymer. These contaminants may have further detrimental effects. Currently, the relative contributions of these factors and their potential synergistic actions are not well understood. To address this, we conducted tests on nubbins of the soft coral Pinnigorgia flava and we evaluated the toxicity of reference additive-free MPs (LDPE and PP, sized 125-250 μm) before and after photo-aging, of MPs collected from beaches, and of the corresponding leachates. By FTIR and SEM analysis, we highlighted similarities between photo-aged reference MPs and the beached MPs, both in terms of surface oxidation and structural defects. GC-MS and dissolved organic carbon (DOC) analysis indicated the release of a variety of molecular species from the photo-aged MPs not detected in the pristine counterpart (accounting for 0.6-2.1 % of the original mass), including short-chain poly-oxidized compounds. The exposure of nubbins to the reference MPs highlighted a significant mucus production with PP and LDPE at 1 mg/L. Leachates from the photo-aged PP induced significant polyp retraction at 10 mg/L, while the leachates from photo-aged LDPE induced significant polyp retraction in P.flava at the concentration of 1 mg/L. No significant stress responses were highlighted with the photo-aged MPs and the leachates from pristine MPs. Beached MPs induced significant responses with the lowest observed effect concentration (LOEC) at 0.1 mg/L. This effect was related to the occurrence of plastic additives not detected in the reference MPs. Overall, the results highlighted the importance of considering the contribution of the photo-degradation products released by MPs in ecotoxicological assessments.

Recent developments and applications of selected ion flow tube mass spectrometry (SIFT-MS)

Selected ion flow tube mass spectrometry (SIFT-MS) is now recognized as the most versatile analytical technique for the identification and quantification of trace gases down to the parts-per-trillion by volume, pptv, range. This statement is supported by the wide reach of its applications, from real-time analysis, obviating sample collection of very humid exhaled breath, to its adoption in industrial scenarios for air quality monitoring. This review touches on the recent extensions to the underpinning ion chemistry kinetics library and the alternative challenge of using nitrogen carrier gas instead of helium. The addition of reagent anions in the Voice200 series of SIFT-MS instruments has enhanced the analytical capability, thus allowing analyses of volatile trace compounds in humid air that cannot be analyzed using reagent cations alone, as clarified by outlining the anion chemistry involved. Case studies are reviewed of breath analysis and bacterial culture volatile organic compound (VOC), emissions, environmental applications such as air, water, and soil analysis, workplace safety such as transport container fumigants, airborne contamination in semiconductor fabrication, food flavor and spoilage, drugs contamination and VOC emissions from packaging to demonstrate the stated qualities and uniqueness of the new generation SIFT-MS instrumentation. Finally, some advancements that can be made to improve the analytical capability and reach of SIFT-MS are mentioned.

Biotechnology for the degradation and upcycling of traditional plastics

Traditional plastics, predominantly derived from petrochemicals, are extensively utilized in modern industry and daily life. However, inadequate management and disposal practices have resulted in widespread environmental contamination, with polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, and polystyrene being the most prevalent pollutants. Biological methods for plastic degradation have garnered significant attention due to their cost-effectiveness and potential for resource recovery, positioning them as promising strategies for sustainable plastic waste management. While polyethylene terephthalate, characterized by its relatively less stable C-O bonds, has been extensively studied and demonstrates significant potential for biodegradation. In contrast, the biodegradation of other plastics remains a significant challenge due to the inherent stability of their C-C backbone structures. This review comprehensively examines the state-of-the-art biotechnology for treating these traditional plastics, focusing on: (1) the roles of specific microorganisms and enzymes, their taxonomic classifications, and the metabolic pathways involved in plastic biodegradation; and (2) a proposed two-stage hybrid approach integrating physicochemical and biological processes to enhance the biodegradation or upcycling of these traditional plastics. Additionally, the review highlights the critical role of multi-omics approaches and tailored strategies in enhancing the efficiency of plastic biodegradation while examining the impact of plastic molecular structures and additives on their degradation potential. It also addresses key challenges and delineates future research directions to foster the development of innovative biological methods for the effective and sustainable management of plastic waste.

Improved volatiles analysis workflows using automated selected ion flow tube mass spectrometry (SIFT-MS)

Selected ion flow tube mass spectrometry (SIFT-MS) is a recent addition to the routine analysis and research laboratory toolkit, primarily as a quantitative tool. SIFT-MS employs ultra-soft chemical ionisation to directly analyse volatile organic compounds (VOCs) in air and headspace in real-time with high specificity and sensitivity. Coupling SIFT-MS with conventional laboratory automation equipment (i.e., that used with chromatography systems) has proved straightforward and enables unattended operation, processing up to 230 samples per day per SIFT-MS instrument. Automated SIFT-MS systems have been applied to analysis of headspace (static, continuous, multiple headspace extraction, and standard additions), sample bags, and thermal desorption tubes. Applications using these approaches include consumer and drug product testing for volatile impurities (such as benzene, formaldehyde, and nitrosamines), environmental samples, clinical research, and materials testing. The stability of the SIFT-MS technique, coupled with its ability to analyse diverse VOCs in a single run, removes the need for system configuration changes and hence reduces calibration demand and streamlines workflows, reducing the time to report the first results in a sequence schedule and increasing sample throughput compared to chromatographic systems. This article reviews the development of the automated-SIFT-MS approach using a variety of application examples and recommends hardware and software improvements that could further enhance its adoption.

Microplastics: an often-overlooked issue in the transition from chronic inflammation to cancer

The presence of microplastics within the human body has raised significant concerns about their potential health implications. Numerous studies have supported the hypothesis that the accumulation of microplastics can trigger inflammatory responses, disrupt the microbiome, and provoke immune reactions due to their physicochemical properties. Chronic inflammation, characterized by tissue damage, angiogenesis, and fibrosis, plays a crucial role in cancer development. It influences cancer progression by altering the tumor microenvironment and impairing immune surveillance, thus promoting tumorigenesis and metastasis. This review explores the fundamental properties and bioaccumulation of microplastics, as well as their potential role in the transition from chronic inflammation to carcinogenesis. Additionally, it provides a comprehensive overview of the associated alterations in signaling pathways, microbiota disturbances, and immune responses. Despite this, the current understanding of the toxicity and biological impacts of microplastics remains limited. To mitigate their harmful effects on human health, there is an urgent need to improve the detection and removal methods for microplastics, necessitating further research and elucidation.

Type-specific inflammatory responses of vascular cells activated by interaction with virgin and aged microplastics

Microplastics (MPs) are recognized as a major environmental problem due to their ubiquitous presence in ecosystems and bioaccumulation in food chains. Not only humans are continuously exposed to these pollutants through ingestion and inhalation, but recent findings suggest they may trigger vascular inflammation and potentially worsen the clinical conditions of cardiovascular patients. Here we combine headspace analysis by needle trap microextraction-gas chromatography-mass spectrometry (HS-NTME-GC-MS) and biological assays to evaluate the effects of polystyrene, high- and low-density polyethylene MPs on phenotype, metabolic activity, and pro-inflammatory status of Vascular Smooth Muscle Cells (VSMCs) the most prominent cells in vascular walls. Virgin and artificially aged MPs (4 weeks at 40 °C and 750 W/m2 simulated solar irradiation) were comparatively tested at 1 mg/mL to simulate a realistic exposure scenario. Our results clearly show the activation of oxidative stress and inflammatory processes when VSMCs were cultured with aged polymers, with significant overexpression of IL-6 and TNF-α. In addition, volatile organic compounds (VOCs), including pentane, acrolein, propanal, and hexanal as the main components, were released by VSMCs into the headspace. Type-specific VOC response profiles were induced on vascular cells from different MPs.

A Review of Weathering Studies in Plastics and Biocomposites-Effects on Mechanical Properties and Emissions of Volatile Organic Compounds (VOCs)

Polymeric materials undergo degradation when exposed to outdoor conditions due to the synergistic effects of sunlight, air, heat, and moisture. The degradation can lead to a decline in mechanical properties, fading, surface cracking, and haziness, attributed to the cleavage of the polymer chains and oxidation reactions. Accelerated weathering testing is a useful technique to evaluate the comparative photodegradation of materials within a reasonable timeframe. This review gives an overview of the different degradation mechanisms occurring in conventional plastics and bio-based materials. Case studies on accelerated weathering and its effect on the mechanical properties of conventional plastics and biocomposites are discussed. Different techniques for analysing volatile organic emissions (VOCs) have been summarized and studies highlighting the characterization of VOCs from aged plastics and biocomposites after aging have been cited.

Revealing the long-term impact of photodegradation and fragmentation on HDPE in the marine environment: Origins of microplastics and dissolved organics

The extensive usage of high-density polyethylene (HDPE) materials in marine environments raises concerns about their potential contribution to plastic pollution. Various factors contribute to the degradation of HDPE in marine environments, including UV radiation, seawater hydrolysis, biodegradation, and mechanical stress. Despite their supposed long lifespans, there is still a lack of understanding about the long-term degradation mechanisms that cause weathering of seawater-exposed HDPE products. In this research, the impact of UV radiation on the degradation of HDPE pile sleeves was studied in natural as well as laboratory settings to isolate the UV effect. After nine years of exposure to the marine environment in natural settings, the HDPE pile sleeves exhibited an increase in oxygen-containing surface functional groups and more morphological changes compared to accelerated UVB irradiation in the laboratory. This indicated that combined non-UV mechanisms may play a major role in HDPE degradation than UV irradiation alone. However, UVB irradiation was found to release dissolved organic carbon and total dissolved nitrogen from HDPE pile sleeves, reaching levels of up to 15 mg/L and 2 mg/L, respectively. Our findings underscore the significance of taking into account both UV and non-UV degradation mechanisms when evaluating the role of HDPE in contributing to marine plastic pollution.

Analysis and identification of degradation products in gas, particle, and liquid phases of polypropylene and polyethyleneterephthalate microplastics aging through non-thermal plasma simulation

Plastic aging can cause alterations in the physical and chemical characteristics of plastics, as well as their behavior in the environment. Due to the extremely slow natural aging process, laboratory simulated aging methods have to be used. In this study, non-thermal plasma (NTP) was adopted to investigate the aging process of polypropylene (PP) and polyethylene terephthalate (PET) microplastics. Various analytical instruments, including proton transfer reaction mass spectrometry and single-particle aerosol mass spectrometry, were employed to examine and identify the organic constituents of the gas, liquid, and particle phase degradation products, as well as to monitor the degradation process. The results showed that after 90 min of aging, both PP and PET surfaces showed yellowing, and the carbonyl index of PP increased while that of PET decreased, with an increase in crystallinity. The organic components of reaction products, such as ketones, esters, acids, and alcohols, increased with longer aging times. Gas products mainly contain aromatic hydrocarbons, while particles from aged PET contain compounds with benzene rings and metal elements. Liquid products from aged PP show a significant presence of branched alkanes. Based on this analysis, degradation mechanisms of PP and PET by NTP were proposed. This investigation represents the initial systematically exploration of the release of organic substances during the degradation of microplastics mediated by NTP. It provides significant insights into the detrimental organic compounds emitted during this process, thereby offering valuable information for understanding the environmental and human health implications of natural microplastic degradation. Furthermore, it addressed the requirements for increased attention to the potential environmental risks associated with these harmful components.

Aging of plastics in aquatic environments: Pathways, environmental behavior, ecological impacts, analyses and quantifications

The ubiquity of plastics in our environment has brought about pressing concerns, with their aging processes, photo-oxidation, mechanical abrasion, and biodegradation, being at the forefront. Microplastics (MPs), whether originating from plastic degradation or direct anthropogenic sources, further complicate this landscape. This review delves into the intricate aging dynamics of plastics in aquatic environments under various influential factors. We discuss the physicochemical changes that occur in aged plastics and the release of oxidation products during their degradation. Particular attention is given to their evolving environmental interactions and the resulting ecotoxicological implications. A rigorous evaluation is also conducted for methodologies in the analysis and quantification of plastics aging, identifying their merits and limitations and suggesting potential avenues for future research. This comprehensive review is able to illuminate the complexities of plastics aging, charting a path for future research and aiding in the formulation of informed policy decisions.

Polystyrene microplastics accumulation in lab-scale vertical flow constructed wetlands: impacts and fate

Microplastics (MPs) are ubiquitous pollutants that significantly threaten organisms and ecosystems. Constructed wetlands (CWs), a nature-based treatment technology, can effectively remove MPs from wastewater. However, the responses of CWs when exposed to MPs remain unclear. In this study, lab-scale vertical flow constructed wetlands (VFCWs) were installed for receiving polystyrene (PS) MPs at concentrations of 100 μg/L and 1000 μg/L. The results showed that exposure to PS-MPs has no effects on COD and TP removal in VFCWs, but TN removal decreased by 3.69-5.37 %. Further investigation revealed that PS-MPs significantly impacted microbial communities and metabolic functions. The abundances of predominant nitrifiers (Nitrospira and Nitrosomonas) and denitrifiers (Nakamurella, Bradyrhizobium, and Bacillus) in VFCWs were significantly reduced, aligning with the responses of key enzymes. The presence of PS-MPs also decreased nitrogen removal by plant uptake, leading to decreased plant biomass and chlorophyll by 39.32-48.75 % and 5.92-32.19 %, respectively. Notably, > 90 % removal rates were observed for PS-MPs within VFCWs. In addition to PS-MPs interception by VFCWs substrate, the increase of released benzenes indicated that the PS-MPs biodegradation occurred. Such insights are vital for developing sustainable solutions to mitigate MPs' adverse effects on ecosystems.

Volatile organic compounds identification and specific stable isotopic analysis (δ13C) in microplastics by purge and trap gas chromatography coupled to mass spectrometry and combustion isotope ratio mass spectrometry (PT-GC-MS-C-IRMS)

Microplastics (MPs) have become one of the major global environmental issues in recent decades due to their ubiquity in the environment. Understanding MPs source origin and reactivity is urgently needed to better constrain their fate and budget. Despite improvements in analytical methods to characterize MPs, new tools are needed to help understand their sources and reactivity in a complex environment. In this work, we developed and applied an original Purge-&-Trap system coupled to a GC-MS-C-IRMS to explore the δ¹³C compound-specific stable isotope analysis (CSIA) of volatile organic compounds (VOC) embedded in MPs. The method consists of heating and purging MP samples, with VOCs being cryo-trapped on a Tenax sorbent, followed by GC-MS-C-IRMS analysis. The method was developed using a polystyrene plastic material showing that sample mass and heating temperature increased the sensitivity while not influencing VOC δ¹³C values. This robust, precise, and accurate methodology allows VOC identification and δ¹³C CSIA in plastic materials in the low nanogram concentration range. Results show that the monomer styrene displays a different δ¹³C value (- 22.2 ± 0.2‰), compared to the δ¹³C value of the bulk polymer sample (- 27.8 ± 0.2‰). This difference could be related to the synthesis procedure and/or diffusion processes. The analysis of complementary plastic materials such as polyethylene terephthalate, and polylactic acid displayed unique VOC δ¹³C patterns, with toluene showing specific δ¹³C values for polystyrene (- 25.9 ± 0.1‰), polyethylene terephthalate (- 28.4 ± 0.5‰), and polylactic acid (- 38.7 ± 0.5‰). These results illustrate the potential of VOC δ¹³C CSIA in MP research to fingerprint plastic materials, and to improve our understanding of their source cycle. Further studies in the laboratory are needed to determine the main mechanisms responsible for MPs VOC stable isotopic fractionation.

Biotechnological methods to remove microplastics: a review

Microplastics pollution is major threat to ecosystems and is impacting abiotic and biotic components. Microplastics are diverse and highly complex contaminants that transport other contaminants and microbes. Current methods to remove microplastics include biodegradation, incineration, landfilling, and recycling. Here we review microplastics with focus on sources, toxicity, and biodegradation. We discuss the role of algae, fungi, bacteria in the biodegradation, and we present biotechnological methods to enhance degradation, e.g., gene editing tools and bioinformatics.

Multi-Analytical Approach to Characterize the Degradation of Different Types of Microplastics: Identification and Quantification of Released Organic Compounds

Microplastics and nanoplastics represent one of the major environmental issues nowadays due to their ubiquitous presence on Earth, and their high potential danger for living systems, ecosystems, and human life. The formation of both microplastics and nanoplastics strongly depends on both the type of pristine materials and the degradation processes related to biological and/or abiotic conditions. The aim of this study is to investigate the effect of two of the most relevant abiotic parameters, namely temperature and light, taken under direct control by using a Solar box, on five types of reference polymers: high density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), and polyethylene terephthalate (PET). A multi-analytical approach was adopted to investigate in detail the first steps of plastics degradation. Samples of plastic materials at different degradation times were analyzed by means of ¹H NMR spectroscopy and thermal desorption gas chromatography mass spectrometry (TD-GC-MS) technique. Several minor molecular species released during degradation were consistently identified by both techniques thus providing a comprehensive view of the various degradation products of these five types of microplastics.

Adverse impacts of high-density microplastics on juvenile growth and behaviour of the endangered tri-spine horseshoe crab Tachypleus tridentatus

The impacts of high-density microplastics, namely polyamine 6,6 (nylon), polymethyl methacrylate (PMMA) and polyethylene terephthalate (PET), on growth and behaviour of the endangered tri-spine horseshoe crab Tachypleus tridentatus were investigated for 100 days. Negative changes in wet weight and prosomal width of the juveniles were observed in all treatments of microplastics, but significant difference was only detected in prosomal width between control and PMMA. T. tridentatus became significantly less active upon exposure to nylon and PET. The extent of burrowing by T. tridentatus did not significantly differ among the treatments but was overall significantly reduced towards day 100. T. tridentatus exposed to PET significantly showed the lowest survival probability (30 %), compared to the other treatments (70-90 %). In conclusion, high-density microplastics compromised growth and behaviour of juvenile horseshoe crabs. Among the polymers that were tested, PET was considered more harmful and associated with higher mortality.

Analysis of volatile organic compounds produced during incineration of non-degradable and biodegradable plastics

As plastic consumption has increased, environmental problems associated with the accumulation of plastic wastes have started to emerge. These include the non-degradability of plastic and its disintegration into sub-micron particles. Although some biodegradable plastic products have been developed to relieve the landfill and leakage burden, a significant portion of discarded plastics are inevitably still incinerated. The concern here is that incinerating plastics may result in the emission of toxic volatile organic compounds (VOCs). Moreover, lack of policy and the limited market share contributes to the indiscriminate discarding of biodegradable plastics, whereby it is mixed and subsequently incinerated with non-degradable plastics. The aim of this study was therefore to qualitatively and quantitatively analyze the VOCs emitted from both non-degradable and biodegradable plastics during combustion employing gas chromatography mass spectrometry. Here, non-degradable poly(vinyl chloride) and poly(ethylene terephthalate) emitted 10-115 and 6-22 ppmv of VOCs, respectively. These emission levels were more than 100 times higher than the VOC concentrations of 0.1-0.5 and 0.1-1.8 ppmv obtained for biodegradable polyhydroxyalkanoate and polylactic acid, respectively. Notably, due to the presence of a repeating butylene group in both non-degradable and biodegradable plastics, 1,3-butadiene accounted for the highest concentration among the VOCs identified, with concentrations of 6-116 ppmv and 0.5-558 ppmv obtained, respectively. During the evaluation of gas barrier films employed for food packaging purposes, non-degradable aluminum-coated multilayered films emitted 9-515 ppmv of VOCs, compared to the 2-41 ppmv VOCs emitted by biodegradable nanocellulose/nanochitin-coated films. Despite the significantly lower levels of VOCs emitted during the incineration of biodegradable plastics, this does not represent suitable waste treatment solution because VOCs are still emitted during incomplete combustion. This study aims to encourage further research into diverse combustion conditions for plastics and stimulate discussions on the fate of discarded plastics.

Leached degradation products from beached microplastics: A potential threat to coastal dune plants

Plants play a fundamental role in maintaining coastal dunes but also accumulate littered microplastics (MPs). Migration tests suggest that naturally weathered MPs can leach out a broader range of potentially phytotoxic chemicals than virgin MPs. Thus, assessing MPs effects on plants using beached-collected particles rather than virgin ones is critically important. Here, the effects on plants of leachates from two pools of beach-collected and virgin MPs, high-density polyethylene (HDPE) and polypropylene (PP), and their mixture, were explored combining toxicity tests and chemical analyses. Phytotoxicity of MP leachates at different dilutions was evaluated under standard laboratory conditions using test species and under environmentally realistic conditions using the dune species Thinopyrum junceum. Leachates from beached PP and HDPE adversely affected all species, and the extent of these effects varied according to polymer type, concentration, and species. Virgin MPs had weaker effects than beached ones. Several potentially phytotoxic oxidized compounds were detected in water by GC/MS analysis, and their amount estimated. Results indicate that the molecular species leaching from beached MPs - at ppm concentration levels for the individual chemical species - can inhibit plant growth, and the effects of leachates from mixtures of degraded MPs can differ from those from individual polymers, highlighting the need for further investigation of MPs consequences for coastal ecosystems.

Seeping plastics: Potentially harmful molecular fragments leaching out from microplastics during accelerated ageing in seawater

Microplastics are the particulate plastic debris found almost everywhere as environmental contaminants. They are not chemically stable persistent pollutants, but reactive materials. In fact, synthetic polymers exposed to the environment undergo chemical and physical degradation processes which lead not only to mechanical but also molecular fragmentation, releasing compounds that are potentially harmful for the environment and human health. We carried out accelerated photo-oxidative ageing of four reference microplastics (low- and high-density polyethylene, polypropylene, and polystyrene) directly in artificial seawater. We then made a characterization at the molecular level along with a quantification of the chemical species leached into water. Gas chromatography/mass spectrometry analyses performed after selective extraction and derivatization enabled us to identify more than 60 different compounds. Analysis of the leachates from the three polyolefins revealed that the main degradation products were mono- and dicarboxylic acids, along with linear and branched hydroxy acids. The highest amount of leached degradation species was observed for polystyrene, with benzoic acid and phenol derivatives as the most abundant, along with oligomeric styrene derivatives. The results from reference microplastics were then compared with those obtained by analyzing leachates in artificial seawater from aged plastic debris collected in a natural environment. The differences observed between the reference and the environmental plastic leachates mainly concerned the relative abundances of the chemical species detected, with the environmental samples showing higher amounts of dicarboxylic acids and oxidized species.

Untargeted selected ion flow tube mass spectrometry headspace analysis: High-throughput differentiation of virgin and recycled polyethylene pellets

RATIONALE

Recycled plastics are increasingly used for packaging of fast-moving consumer goods (FMCG). Compared with packaging made from virgin polymers, there is greater risk of taints entering products due to prior use of the polymers and incomplete cleaning. Increased quality assurance testing of polymer feedstock is required for recycled packaging. Selected ion flow tube mass spectrometry (SIFT-MS) analysis coupled with multivariate statistical data processing can provide high-throughput untargeted screening of recycled polymers at low cost per sample.

METHODS

SIFT-MS is a direct-injection MS technique that provides high-throughput automated headspace analysis of polymer samples when coupled with a syringe-injection autosampler (12 incubated samples per hour). Full-scan SIFT-MS data were processed using multivariate statistical analysis (specifically, the soft independent modeling by class analogy (SIMCA) algorithm).

RESULTS

SIFT-MS full-scan data were acquired for ten replicates each of ten recycled and four virgin high-density polyethylene (HDPE) pellet products from multiple manufacturers. The samples varied approximately 20-fold in terms of total volatile residue, while showing very high repeatability across replicates. SIFT-MS scan data were dominated by aliphatic and monoterpene hydrocarbon residues, and - to a lesser extent - alcohols. Application of the SIMCA algorithm to the data resulted in successful classification by both individual samples and manufacturers.

CONCLUSIONS

Automated, untargeted SIFT-MS analysis coupled with multivariate statistical data analysis has the potential to provide rapid, effective screening of recycled polymer products, which would provide increased quality assurance of recycled polymers used for FMCG.

New methodologies for the detection, identification, and quantification of microplastics and their environmental degradation by-products

Sampling, separation, detection, and characterization of microplastics (MPs) dispersed in natural water bodies and ecosystems is a challenging and critical issue for a better understanding of the hazards for the environment posed by such nearly ubiquitous and still largely unknown form of pollution. There is still the need for exhaustive, reliable, accurate, reasonably fast, and cost-efficient analytical protocols allowing the quantification not only of MPs but also of nanoplastics (NPs) and of the harmful molecular pollutants that may result from degrading plastics. Here a set of newly developed analytical protocols, integrated with specialized techniques such as pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS), for the accurate and selective determination of the polymers most commonly found as MPs polluting marine and freshwater sediments are presented. In addition, the results of an investigation on the low molecular weight volatile organic compounds (VOCs) released upon photo-oxidative degradation of microplastics highlight the important role of photoinduced fragmentation at a molecular level both as a potential source of hazardous chemicals and as accelerators of the overall degradation of floating or stranded plastic debris.

Coating-Based Quartz Crystal Microbalance Detection Methods of Environmentally Relevant Volatile Organic Compounds

Volatile organic compounds (VOCs) that evaporate under standard atmospheric conditions are of growing concern. This is because it is well established that VOCs represent major contamination risks since release of these compounds into the atmosphere can contribute to global warming, and thus, can also be detrimental to the overall health of worldwide populations including plants, animals, and humans. Consequently, the detection, discrimination, and quantification of VOCs have become highly relevant areas of research over the past few decades. One method that has been and continues to be creatively developed for analyses of VOCs is the Quartz Crystal Microbalance (QCM). In this review, we summarize and analyze applications of QCM devices for the development of sensor arrays aimed at the detection of environmentally relevant VOCs. Herein, we also summarize applications of a variety of coatings, e.g., polymers, macrocycles, and ionic liquids that have been used and reported in the literature for surface modification in order to enhance sensing and selective detection of VOCs using quartz crystal resonators (QCRs) and thus QCM. In this review, we also summarize novel electronic systems that have been developed for improved QCM measurements.

A Systematic Study on the Degradation Products Generated from Artificially Aged Microplastics

Most of the analytical studies focused on microplastics (MPs) are based on the detection and identification of the polymers constituting the particles. On the other hand, plastic debris in the environment undergoes chemical and physical degradation processes leading not only to mechanical but also to molecular fragmentation quickly resulting in the formation of leachable, soluble and/or volatile degradation products that are released in the environment. We performed the analysis of reference MPs–polymer micropowders obtained by grinding a set of five polymer types down to final size in the 857–509 μm range, namely high- and low-density polyethylene, polystyrene (PS), polypropylene (PP), and polyethylene terephthalate (PET). The reference MPs were artificially aged in a solar-box to investigate their degradation processes by characterizing the aged (photo-oxidized) MPs and their low molecular weight and/or highly oxidized fraction. For this purpose, the artificially aged MPs were subjected to extraction in polar organic solvents, targeting selective recovery of the low molecular weight fractions generated during the artificial aging. Analysis of the extractable fractions and of the residues was carried out by a multi-technique approach combining evolved gas analysis–mass spectrometry (EGA–MS), pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS), and size exclusion chromatography (SEC). The results provided information on the degradation products formed during accelerated aging. Up to 18 wt% of extractable, low molecular weight fraction was recovered from the photo-aged MPs, depending on the polymer type. The photo-degradation products of polyolefins (PE and PP) included a wide range of long chain alcohols, aldehydes, ketones, carboxylic acids, and hydroxy acids, as detected in the soluble fractions of aged samples. SEC analyses also showed a marked decrease in the average molecular weight of PP polymer chains, whereas cross-linking was observed in the case of PS. The most abundant low molecular weight photo-degradation products of PS were benzoic acid and 1,4-benzenedicarboxylic acid, while PET had the highest stability towards aging, as indicated by the modest generation of low molecular weight species.