Mechanistic interaction of ciprofloxacin on zeolite modified seaweed (Sargassum crassifolium) derived biochar: Kinetics, isotherm and thermodynamics

Research advances on production and application of algal biochar in environmental remediation

Algae, comprising microalgae and macroalgae, have emerged as a promising feedstock for the production of functional biochar. Recently, the application of algal biochar in environmental remediation gains increasing attention. This review summarizes research advancements in the synthesis and application of algal biochar, a versatile and sustainable material for environmental remediation ranging from wastewater treatment to soil improvement. Algal biochar can be prepared by pyrolysis, microwave-assisted pyrolysis, and hydrothermal carbonization. Physical and chemical modifications have proven to be effective for improving biochar properties. Algal biochar is promising for removing diverse pollutants including heavy metals, organic pollutants, and microplastics. The role in soil improvement signifies a sustainable approach to enhancing soil structure, nutrient retention, and microbial activity. Research gaps are identified based on current understanding, necessitating further exploration into variations in biochar characteristics, the performance improvement, large-scale applications, and the long-term evaluation for environmental application. This review provides a better understanding of algal biochar as a sustainable and effective tool in environmental remediation.

In-situ synthesis of ZIF-8 on magnetic pineapple leaf biochar as an efficient and reusable adsorbent for methylene blue removal from wastewater

The presence of organic dyes in aquatic systems poses a significant threat to ecosystems and human well-being. Due to recycling challenges, traditional commercial activated carbon is not cost-effective. To address this, an imidazolate acid zeolite framework-8 (ZIF-8)-modified magnetic adsorbent (ZMPLB-800) was synthesized through the in-situ formation of ZIF-8 and subsequent carbonization at 800 °C, using magnetic pineapple leaf biochar (MPLB) as a carrier. The porous structure of ZMPLB-800 facilitates the rapid passage of dye molecules, enhancing adsorption performance. ZMPLB-800 exhibited remarkable adsorption capacity for methylene blue (MB) across a pH range of 3-13, with a maximum adsorption capacity of 455.98 mg g-1. Adsorption kinetics and thermodynamics followed the pseudo-second-order kinetic model and Langmuir isotherm model. Mechanisms of MB adsorption included pore filling, hydrogen bonding, electrostatic interactions, π-π interactions, and complexation through surface functional groups. Additionally, ZMPLB-800 demonstrated excellent regeneration performance, recording a removal efficiency exceeding 87% even after five adsorption/desorption cycles. This study provides a novel strategy for treating dye wastewater with MOF composites, laying the foundation for waste biomass utilization.

Dual valorization of coastal biowastes for tetracycline remediation and biomethane production: A composite assisted anaerobic digestion

Harnessing coastal biowaste for dual valorization in water treatment and biofuel production holds paramount importance for sustainability and resource challenges. This study investigated the potential of engineered composite (CABC) derived from coastal biowaste-based materials for tetracycline (TC) removal and biomethane production. High-yield calcium carbonate (CaCO3; 95.65%; bivalve shells) and biochar (GA-BC; 41.50%; green macroalgae) were produced and used as precursors for CABC. The characterization results revealed presence of β-CaCO3 and ν2-CO3 aragonite in CaCO3, and composite homogeneity was achieved. The CABC exhibited a maximum TC sorption capacity of 342.26 mg/g via synergistic sorption mechanisms (i.e., surface/pore filling, electrostatic attraction, calcium ion exchange, and chelation). Supplementation of anaerobic digestion process with GA-BC, CaCO3, and CABC was investigated via three consecutive cycles. Biochemical methane potential of glucose as a sole substrate was increased from 157.50 to 217.00, 187.00, and 259.00 mL-CH4, while dual substrate (glucose+TC) treatment was increased from 94.5 to 146.5, 129.0, and 153.00 mL-CH4 for GA-BC, CaCO3, and CABC, respectively. Moreover, system stability and TC removal were increased with the addition of GA-BC (40.90%), CaCO3 (16.30%), and CABC (53.70%). Therefore, this study exemplifies the circular bioeconomy approach, demonstrating the sustainable use of biowaste-derived composite for water treatment and biofuel production.

Synergistic effect and mechanism of nZVI/LDH composites adsorption coupled reduction of nitrate in micro-polluted water

In this study, nZVI/LDH composites were prepared by loading nano zero-valent iron (nZVI) on layered double hydroxide (LDH) surface for adsorption coupled reduction of nitrate (NO3--N). The results showed that the removal of NO3--N and total nitrogen (TN) by the nZVI/LDH composites was 88.64% and 77.63%, respectively, with a selectivity of 55.21% for N2 and only 1.86% for ammonia nitrogen (NH4+-N) within 180 min. The valence states of various N forms during the adsorption-reduction process were investigated. The mechanism of synergistic adsorption-reduction degradation of NO3--N was proposed by measuring the contents of NO3--N, nitrite (NO2--N), and NH4+-N in the aqueous and adsorbed phases in the reaction process, including rapid adsorption of initial NO3--N, chemical reduction of adsorbed NO3--N and resorption of the final product. The nZVI/LDH also maintained up to 82.56% NO3--N removal in natural water, with aging experiments proved that the composites maintained 60.48% NO3--N removal after 15 days. Therefore, the composites may have great application prospects for NO3--N removal in micro-polluted water.

Synergistic mechanisms for the superior sorptive removal of aquatic pollutants via functionalized biochar-clay composite

This study investigated the successful synthesis of functionalized algal biochar-clay composite (FBKC). Subsequently, the sorption performance of FBKC towards norfloxacin (NFX) antibiotic and crystal violet dye (CVD) from water was extensively assessed in both batch and continuous flow systems. A series of characterization techniques were carried out for FBKC and the utilized precursors, indicating that the surface area of FBKC was increased thirty-fold with a well-developed pore structure compared to the original precursors. FBKC demonstrated a maximum sorption capacity of 192.80 and 281.24 mg/g for NFX and CVD, respectively. The suited fitting of the experimental data to Freundlich and Clark models suggested multi-layer sorption of NFX/CVD molecules. The mechanistic studies of NFX/CVD sorption onto FBKC unveiled multiple mechanisms, including π-π interaction, hydrogen bonding, electrostatic attraction, and surface/pore filling effect. The estimated cost of 5.72 €/kg and superior sorption capacity makes FBKC an efficient low-cost sorbent for emergent water pollutants.

Hydrogel bioreactor drives Feammox and synergistically removes composite pollutants: Performance optimization, microbial communities and functional genetic differences

Mixed pollutant wastewater has been a difficult problem due to the high toxicity of water bodies and the difficulty of treatment. Rice husk biochar modified with nano-iron tetroxide (RBC-nFe3O4) by polyvinyl alcohol cross-linking internal doping was used to introduce iron-reducing bacteria Klebsiella sp. FC61 to construct a bioreactor. The results of the long-term operation of the bioreactor showed that the removal efficiency of ammonia nitrogen (NH4+-N) and chemical oxygen demand best reached 90.18 and 98.49%, respectively. In addition, in the co-presence of Ni2+, Cd2+, and ciprofloxacin, the bioreactor was still able to remove pollutants efficiently by RBC-nFe3O4 and bio-iron precipitation inside the biocarrier. During the long-term operation, Klebsiella was always the dominant species in the bioreactor. And the sequencing data for functional prediction showed that the biocarrier contained a variety of enzymes and proteins involved in Feammox-related activities to ensure the stable and efficient operation of the bioreactor.

Enhanced Sorption Performance of Natural Zeolites Modified with pH-Fractionated Humic Acids for the Removal of Methylene Blue from Water

This work explores the effect of humic acids (HA) fractionation on the sorption ability of a natural zeolite (NYT)-HA adduct. HA were extracted from compost, fractionated via the pH fractionation method, and characterized via UV-Vis spectroscopy and gel permeation chromatography. The HA samples were immobilized onto NYT via thermal treatment. The resulting adducts (NYT-HA) were tested for their ability to remove methylene blue (MB) from an aqueous solution. It was found that the sorption performance of NYT-HA strongly depends on the chemical characteristics of humic acids. Sorption capacity increased with the molecular weight and hydrophobicity degree of the HA fractions. Hydrophobic and π-π interactions are likely the primary mechanisms by which MB interacts with HA. The sorption kinetic data conform to the pseudo-second-order model. The Freundlich isotherm model adequately described the sorption equilibrium and revealed that the uptake of MB onto NYT-HA is endothermic in nature.

Enhancing arsenic adsorptions by optimizing Fe-loaded biochar and preliminary application in paddy soil under different water management strategies

Arsenic (As) is widely distributed in nature and is a highly toxic element impacting human health through drinking water and rice. In this study, an optimized approach was attempted to improve As adsorption capabilities by combining pre- and post-pyrolysis modification of Fe(oxy)hydroxides to rice husk biochar (FRB), of which the method is rarely addressed in previous studies. Maghemite and goethite were successfully loaded onto biochar, characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoemission spectroscopy (XPS) analyzer. The FRB had maximum As(III) and As(V) adsorption capabilities of 7908 and 11,268 mg/kg, respectively, which was significantly higher than that of Fe-modified biochar in the pre-pyrolysis and/or post-pyrolysis process. Adsorption mechanisms for As explored by Fourier-transform infrared spectroscopy (FTIR), XPS analysis mainly included electronic attraction and ligand exchange with hydroxyl groups on the FRB. It was noteworthy that more than half of the As(II) species loaded on FRB were converted into less toxic As(V) species, which could be mediated by the redox-active groups on the biochar. The preliminary application of FRB in soil indicated that it has an effective remediation potential for As-contaminated soil under flooded conditions, while promoted As release under dry conditions. Finding of this study highlighted that the loading of metal oxides onto biochar by combining pre- and post-pyrolysis modification could potentially increase As adsorption capabilities and further help in strategic water management.

Impregnation of biochar with montmorillonite and its activation for the removal of azithromycin from aqueous media

An inexpensive and environmentally friendly composite synthesized from rice husk, impregnated with montmorillonite and activated by carbon dioxide, was investigated for the removal of azithromycin from an aqueous solution. Various techniques were used to characterize adsorbents in detail. The sorption process was primarily regulated by the solution pH, pollutant concentration, contact duration, adsorbent dose, and solution temperature. The equilibrium data were best analyzed using the nonlinear Langmuir and Sips (R² > 0.97) isotherms, which revealed that adsorption occurs in a homogenous manner. The adsorption capacity of pristine biochar and carbon dioxide activated biochar-montmorillonite composite was 33.4 mg g^-1 and 44.73 mg g^-1, respectively. Kinetic studies identified that the experimental data obeyed the pseudo-second-order and Elovich models (R² > 0.98) indicating the chemisorption nature of adsorbents. The thermodynamic parameters determined the endothermic and spontaneous nature of the reaction. The ion exchange, π-π electron-donor-acceptor (EDA) interactions, hydrogen-bonding, and electrostatic interactions were the plausible mechanisms responsible for the adsorption process. This study revealed that a carbon dioxide activated biochar-montmorillonite composite may be used as an effective, sustainable, and economical adsorbent for the removal of azithromycin from polluted water.

Super facile one-step synthesis of sugarcane bagasse derived N-doped porous biochar for adsorption of ciprofloxacin

A new N-doped biochar derived from sugarcane bagasse (NSB) was prepared by one-pot pyrolysis with sugarcane bagasse as feedstock, melamine as nitrogen source and NaHCO₃ as pore-forming agent, and then NSB was used to adsorb ciprofloxacin (CIP) in water. The optimal preparation conditions of NSB were determined based on the evaluation index of adsorbability of NSB for CIP. SEM, EDS, XRD, FTIR, XPS and BET characterizations were used to analyze the physicochemical properties of the synthetic NSB. It was found that the prepared NSB had excellent pore structure, high specific surface area and more nitrogenous functional groups. Meanwhile, it was demonstrated that the synergistic interaction between melamine and NaHCO₃ increased the pores of NSB and the largest surface area of NSB was 1712.19 m²/g. The CIP adsorption capacity of 212 mg/g was obtained under optimal parameters as follows: NSB amount 0.125 g/L, initial pH 6.58, adsorption temperature 30 °C, CIP initial concentration 30 mg/L and adsorption time 1 h. The isotherm and kinetics studies elucidated that the adsorption of CIP conformed both D-R model and Pseudo-second-order kinetic model. The high CIP adsorption capacity of NSB for CIP was due to the combined filling pore, π-π conjugation and hydrogen bonding. All results demonstrated that adsorption of CIP by the low-cost N-doped biochar of NSB is a reliable technology for the disposal of CIP wastewater.

Hydrochloric acid-modified fungi-microalgae biochar for adsorption of tetracycline hydrochloride: Performance and mechanism

Novel biochar (BC) was prepared by pyrolysis using Aspergillus oryzae-Microcystis aeruginosa (AOMA) flocs as raw materials. It has been used for tetracycline hydrochloride (TC) adsorption along with acid (HBC) and alkali modification (OHBC). Compared with BC (114.5 m² g^-1) and OHBC (283.9 m² g^-1), HBC had a larger specific surface area (S_BET=338.6 m² g^-1). Meanwhile, the Elovich kinetic and Sip isotherm models adequately fit the adsorption data, and intraparticle diffusion is the controlling factor for TC adsorption diffusion on HBC. Furthermore, the thermodynamic data indicated that this adsorption was endothermic and spontaneous. The experimental results demonstrated that there are multiple interactions during the adsorption reaction process, including pore filling, H-bonds, π-π interaction, hydrophobic affinity, and van der Waals forces. In general, biochar prepared from flocs of AOMA can be used to remediate tetracycline-contaminated water, and it is of great significance in improving resource utilization.

Nano iron tetroxide-modified rice husk biochar promoted Feammox performance of Klebsiella sp. FC61 and synergistically removed Ni2+ and ciprofloxacin

The iron reduction coupled with ammonia oxidation process (Feammox) is a biological reaction process associated with the nitrogen cycle that has been discovered in recent years. In this study, the iron-reducing bacterium Klebsiella sp. FC61 was attached by synthesizing nano-loadings of iron tetroxide (nFe₃O₄) onto rice husk biochar (RBC), and the RBC-nFe₃O₄ was used as an electron shuttle to participate in the biological iron reduction process of soluble and insoluble Fe³⁺ to improve the ammonia oxidation efficiency to 81.82%. This acceleration of electron transfer increased the carbon consumption rate and further tuned up the COD removal efficiency to 98.00%. The Feammox could be coupled with iron denitrification for internal nitrogen/iron cycling to reduce the accumulation of nitrate by-products and achieve the recycling of iron. In addition, pollutants such as Ni²⁺, ciprofloxacin, and formed chelates could be removed by pore adsorption and π-π interactions using bio-iron precipitates produced by iron-reducing bacteria.

Enhanced adsorptive removal of hexavalent chromium in aqueous media using chitosan-modified biochar: Synthesis, sorption mechanism, and reusability

Hexavalent chromium (Cr(VI)) is deemed a priority contaminant owing to its carcinogenicity, teratogenicity, and mutagenicity towards flora and fauna. A novel Chitosan-modified Mimosa pigra biochar (CMPBC) was fabricated and efficiency of Cr(VI) oxyanion removal in aqueous systems was compared with the pristine biochar. The gross composition of pyrolyzed biomass was determined through the proximate analysis. The instrumental characterization of X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) confirmed the amino modification of MPBC when treated with chitosan. Characteristic features of the Cr(VI) sorptive process by CMPBC and MPBC were examined by performing batch sorption studies. Experimental data suggested that sorption is heavily dependent on pH, with the highest adsorption capacity (14.4 ± 0.9 mg g^-1) occurring at pH 3. It was further noted that the removal efficiency of CMPBC (92%) was considerably greater than that of MPBC (75%) when the biochar dose and initial concentration of Cr(VI) are 1 g L^-1 and 5 mg L^-1 respectively. The kinetic data were best interpreted by the power function model (R² = 0.97) suggesting a homogenous chemisorption process. The isotherm data of removal of Cr(VI) by CMPBC was inferred well by Redlich Peterson and Temkin isotherms. Results of sorption-desorption regeneration cycles indicated that the Cr(VI) uptake by CMPBC is not fully reversible. The electrostatic attractions between cationic surface functionalities and Cr(VI) oxyanions, partial reductive transformation of Cr(VI) species to Cr(III), as well as complexation of Cr(III) onto CMPBC were the possible mechanisms of mitigation of Cr(VI) by CMPBC. The results and outcomes of this research suggest the possibility of utilizing the chitosan-modified Mimosa pigra biochar as an easily available, environmentally sustainable, and inexpensive sorbent to decontaminate Cr(VI) pollution from aqueous media.

Biological Activities of Sargassum Algae Mediated ZnO and Co Doped ZnO Nanoparticles as Enhanced Antioxidant and Anti-Diabetic Agents

Brown macroalgae (BMG) were used as carriers for ZnO (ZnO/BMG) and cobalt-doped ZnO (Co-ZnO/BMG) via facile microwave-assisted hydrothermal synthesis. The multifunctional structures of synthesized composites were evaluated as enhanced antioxidant and anti-diabetic agents based on the synergistic effects of ZnO, Co-ZnO, and BMG. BMG substrate incorporation and cobalt doping notably enhanced the bioactivity of the synthesized ZnO nanoparticles. As an antioxidant, the Co-ZnO/BMG composite exhibited highly effective scavenging properties for the common free reactive oxygen radicals (DPPH [89.6 ± 1.5%], nitric oxide [90.2 ± 1.3%], ABTS [87.7 ± 1.8%], and O2●- [46.7 ± 1.9%]) as compared to ascorbic acid. Additionally, its anti-diabetic activity was enhanced significantly and strongly inhibited essential oxidative enzymes (porcine α-amylase (90.6 ± 1.5%), crude α-amylase (84.3 ± 1.8%), pancreatic α-glucosidase (95.7 ± 1.4%), crude intestinal α-glucosidase (93.4 ± 1.8%), and amyloglucosidase (96.2 ± 1.4%)). Co-ZnO/BMG inhibitory activity was higher than that of miglitol, and in some cases, higher than or close to that of acarbose. Therefore, the synthetic Co-ZnO/BMG composite can be used as a commercial anti-diabetic and antioxidant agent, considering the cost and adverse side effects of current drugs. The results also demonstrate the impact of cobalt doping and BMG integration on the biological activity of ZnO.

Bio-Based Adsorption as Ecofriendly Method for Wastewater Decontamination: A Review

Intense human activities have for years contributed to the pollution of the environment by many dangerous pollutants such as heavy metals, pesticides, or polycyclic aromatic hydrocarbons. There are many conventional methods used to control pollution, with practical and/or financial drawbacks. Therefore, in recent years, an innovative, easy-to-implement and inexpensive adsorption method has been developed to recover waste and clean up water from micropollutants. Firstly, this article aims to summarize the issues related to water remediation and to understand the advantages and disadvantages of the methods classically used to purify water. In particular, this review aims to provide a recent update of the bio-based adsorbents and their use. Differently from the majority of the reviews related to wastewater treatment, in this article several classes of pollutants are considered. Then, a discussion about the adsorption process and interactions involved is provided. Finally, perspectives are suggested about the future work to be done in this field.

New insights into the migration, distribution and accumulation of micro-plastic in marine environment: A critical mechanism review

Microplastics (MPs) are widely distributed in the marine environment, posing a significant threat to marine biota. The contribution of anthropogenic and terrestrial sources to the aquatic ecosystem has led to an increase in MPs findings, and their abundance in aquatic biota has been reported to be of concern. MPs are formed mainly via photo degradation of macroplastics (large plastic debris), and their release into the environment is a result of the degradation of additives. Eco-toxicological risks are increasing for marine organisms, due to the ingestion of MPs, which cause damage to gastrointestinal (GI) tracts and stomach. Plastics with a size <5 mm are considered MPs, and they are commonly identified by Raman spectroscopy, Fourier transfer infrared (FTIR) spectroscopy, and Laser direct infrared (LDIR). The size, density and additives are the main factors influencing the abundance and bioavailability of MPs. The most abundant type of MPs found in fishes are fiber, polystyrenes, and fragments. These microscale pellets cause physiological stress and growth deformities by targeting the GI tracts of fishes and other biota. Approximately 80% MPs come from terrestrial sources, either primary, generated during different products such as skin care products, tires production and the use of MPs as carrier for pharmaceutical products, or secondary plastics, disposed of near coastal areas and water bodies. The issue of MPs and their potential effects on the marine ecosystem require proper attention. Therefore, this study conducted an extensive literature review on assessing MPs levels in fishes, sediments, seawater, their sources, and effects on marine biota (especially on fishes), chemo-physical behavior and the techniques used for their identification.

The efficient removal of congo red and ciprofloxacin by peony seeds shell activated carbon with ultra-high specific surface area

Preparation of high-performance activated carbon from agroforestry waste biomass can effectively improve the shortcomings of traditional biomass carbon performance. Using the waste biomass peony seeds shell (PSS) as the precursors in this study, high performance activated carbon was prepared by the KOH two-step activation method and used to remove congo red (CR) and ciprofloxacin (CIP) in water pollution. The obtained PSS-based activated carbons (PSACs) were characterized by SEM, EDS, N₂ adsorption-desorption isotherm, FTIR, and XRD methods. The results showed that the activated carbon at 700 °C (PSAC-700) had an ultra-high specific surface area (2980.96 m²/g), excellent micropore volume (1.12 cm³/g), and abundant surface functional groups. The results of adsorption performance revealed that PSAC-700 exhibited excellent adsorption capacity for CR (q_max = 2003.2 mg/g) and CIP (q_max = 782.3 mg/g), which was superior to the carbon-based adsorbents reported reviously in the literature. Langmuir model could well describe the adsorption process of PSACs for CR and CIP, indicating that the pollutant molecules were uniformly adsorbed on the surface monolayer. The regeneration experiment suggested that after three cycles, the adsorption capacities of PSAC-700 for CR and CIP reached 1814 mg/g and 697 mg/g, respectively, with good repeatability. The preparation of PSAC-700 in this study has high adsorption capacity and strong application, which is an ideal material for wastewater purification adsorbent and has broad application prospect.

Temperature influence on layered double hydroxide tailored corncob biochar and its application for fluoride removal in aqueous media

Exposure to excess fluoride is a controversial public health concern as it can cause dental/skeletal fluorosis as well as renal toxicity. The study intended to evaluate the synergistic interaction of clay intercalation and thermochemical modification on corncob biochar to remove fluoride from aqueous solutions. Layered double hydroxide was assorted with thermally activated (torrefaction and pyrolysis) corncob biochar at 1:1 (w/w) ratio to obtain composites called LDH-CCBC250 and LDH-CCBC500. Physicochemically characterized adsorbents were assessed against the pH (3-9), reaction time (up to 12 h) and initial fluoride concentration (0.5-10 mg L^-1) for defluoridation. The porous structure of biochar was found to be richer compared to biocharcoal. The adsorption performance of LDH-CCBC500 was 6-fold higher compared to LDH-CCBC250 signifying the pronounced effect of thermal activation. Fluoride adsorption was pH dependent, and the best pH was in the range of pH 3.5-5.0 and there was no ionic strength dependency. Fluoride uptake by LDH-CCBC500 follows pseudo-second order and Elovich kinetic models, which suggests a chemisorption process followed by physisorption. The most expected way to eliminate fluoride by LDH-CCBC500, which had a maximum adsorption capacity of 7.24 mg g^-1, was cooperative chemical adsorption upon the Langmuir and Hills isotherm (r² = 0.99) parameters. Layered double hydroxide intercalated corncob biochar derived from slow pyrolysis is best performing in acidic waters.

Fe-Al bimetallic oxides functionalized-biochar via ball milling for enhanced adsorption of tetracycline in water

The clusters formed by modified materials on its surface makes the application of functionalized biochars in adsorption face a great challenge. Here, a facile ball milling technology was innovatively proposed to tailor Fe-Al oxides-laden bagasse biochar to fabricate a novel adsorbent (BMFA-BC). Benefited from the increased exposure of Fe-Al oxides and, more importantly, enhanced functional groups by ball milling, the adsorption capacity of BMFA-BC for aqueous tetracycline reached up to 116.6 mg g^-1 at 298 K. And the adsorption performance was temperature-dependent. Characterization analysis, batch sorption (thermodynamics, kinetics, isotherms, chemical factors) as well as data modeling illustrated that this superior adsorption ability could be attributed to π-π conjugation, H-bonding, complexation as well as pore filling. BMFA-BC displayed good adsorption capacity in multiple aqueous environments. The excellent regeneration ability, magnetic susceptibility ensured its viability for sustainable pollutants removal. These superiorities revealed that BMFA-BC was a suitable sorbent for antibiotics elimination.

An achieved strategy for magnetic biochar for removal of tetracyclines and fluoroquinolones: Adsorption and mechanism studies

In this study, poplar wood biochar modified with Fe₃O₄ (MPBC) was prepared using poplar wood as carbon source applied to remove tetracyclines and fluoroquinolones. The adsorption behavior was investigated by batch experiments, and a series of characterization techniques were used to study the corresponding mechanism. Characterizations indicated that pore filling, electrostatic interactions, π-π interaction, surface complexation, and hydrogen bond contributed to the adsorption of antibiotics on MPBC. Most importantly, the thermodynamic experiment results showed that the adsorption capacity of MPBC for tetracyclines (70.28-89.58 mg⋅g^-1) was significantly higher than fluoroquinolones (35.54-60.31 mg⋅g^-1), which was further explained by hydrogen bond interactions calculated from Conductor-like screening model for real solvents (COSMO-RS). In addition, the adsorption between MPBC and antibiotics was favorable at lower ionic strengths and neutral conditions. Conclusively, this study could provide a promising approach to controlling the pollution of tetracyclines and fluoroquinolones.

A Critical Review of Snail Shell Material Modification for Applications in Wastewater Treatment

Sea material is becoming increasingly popular and widely used as an adsorbent in wastewater treatment. Snail shell, a low-cost and natural animal waste material, has been shown to have a high calcium content (>99%) and a large potential surface area for the development of sustainable adsorbents. This paper presents a novel synthesis of methods for using snail shell absorbent materials in the treatment of wastewater containing heavy metals, textile dyes, and other organic substances. Modified biochar made from snail shells has gained popularity in recent years due to its numerous benefits. This paper discusses and analyzes modification methods, including impregnating with supplements, combining other adsorbents, synthesis of hydroxyapatite, co-precipitation, and the sol-gel method. The analysis of factors influencing adsorption efficiency revealed that pH, contact time, temperature, initial concentration, and adsorbent dose all have a significant impact on the adsorption process. Future research directions are also discussed in this paper as a result of presenting challenges for current snail adsorbents.

Enhanced Adsorption of Sulfonamides by Attapulgite-Doped Biochar Prepared with Calcination

The extensive use of sulfonamides seriously threatens the safety and stability of the ecological environment. Developing green inexpensive and effective adsorbents is critically needed for the elimination of sulfonamides from wastewater. The non-modified biochar exhibited limited adsorption capacity for sulfonamides. In this study, the attapulgite-doped biochar adsorbent (ATP/BC) was produced from attapulgite and rice straw by calcination. Compared with non-modified biochar, the specific surface area of ATP/BC increased by 73.53−131.26%, and the average pore width of ATP/BC decreased 1.77−3.60 nm. The removal rates of sulfadiazine and sulfamethazine by ATP/BC were 98.63% and 98.24%, respectively, at the mass ratio of ATP to rice straw = 1:10, time = 4 h, dosage = 2 g∙L−1, pH = 5, initial concentration = 1 mg∙L−1, and temperature = 20 °C. A pseudo-second-order kinetic model (R2 = 0.99) and the Freundlich isothermal model (R2 = 0.99) well described the process of sulfonamide adsorption on ATP/BC. Thermodynamic calculations showed that the adsorption behavior of sulfonamides on the ATP/BC was an endothermic (ΔH > 0), random (ΔS > 0), spontaneous reaction (ΔG < 0) that was dominated by chemisorption (−20 kJ∙mol−1 > ΔG). The potential adsorption mechanisms include electrostatic interaction, hydrogen bonding, π−π interaction, and Lewis acid−base interactions. This study provides an optional material to treat sulfonamides in wastewater and groundwater.

Insights on ball milling enhanced iron magnesium layered double oxides bagasse biochar composite for ciprofloxacin adsorptive removal from water

Both ciprofloxacin (CIP) and sugarcane bagasse have brought enormous pressure on environmental safety. Here, an innovative technique combining Fe-Mg-layered double oxides and ball milling was presented for the first time to convert bagasse-waste into a new biochar adsorbent (BM-LDOs-BC) for aqueous CIP removal. The maximum theoretical adsorption capacity of BM-LDOs-BC reached up to 213.1 mg g^-1 due to abundant adsorption sites provided by well-developed pores characteristics and enhanced functional groups. The results of characterization, data fitting and environmental parameter revealed that pore filling, electrostatic interactions, H-bonding, complexation and π-π conjugation were the key mechanisms for CIP adsorptive removal. BM-LDOs-BC exhibited satisfactory environmental safety and outstanding adsorption capacity under various environmental situations (pH, inorganic salts, humic acid). Moreover, BM-LDOs-BC possessed excellent reusability. These superiorities illustrated that BM-LDOs-BC was a promising adsorbent and created a new avenue for rational placement of biowaste and high-efficiency synthesis of biochar for antibiotic removal.

Amino-functionalized biochars for the detoxification and removal of hexavalent chromium in aqueous media

The objectives of the study were to evaluate and compare the efficacy of hexavalent chromium (Cr(VI)) removal by amino-modified (HDA-MPBC) and pristine biochar (MPBC) derived from an invasive plant Mimosa pigra. Prepared biochars were characterized and batch experiments were conducted to check the performance and the mechanisms of Cr(VI) removal. FTIR spectra revealed that the surface of HDA-MPBC is abundant with amino functional groups which was further confirmed by XPS analysis. The highest Cr(VI) removal for both HDA-MPBC (76%) and MPBC (62%) was observed at pH 3.0. The batch sorption data were well fitted to the Freundlich isotherm model and pseudo-second-order kinetic model, suggesting the involvement of both physisorption and chemisorption mechanisms for Cr(VI) removal. X-ray photoelectron spectroscopy studies showed that both Cr(VI) and Cr(III) were presented at the modified biochar surface after adsorption. These results indicated that the electrostatic attraction of Cr(VI) coupled with reduction of Cr(VI) to Cr(III) and complexation of Cr(III) ions with functional groups on HDA-MPBC as the most plausible mechanism for removal of Cr(VI) by modified biochar. Regeneration experiment concluded that adsorbed Cr(VI) onto the surface of HDA-MPBC had the least tendency of being desorbed in basic conditions. HDA-MPBC showed a high performance in adsorptive removal of Cr(VI) compared to pristine biochar signifying the amino modification to enhance adsorption performance of biochar in Cr(VI) removal from wastewater.

Enhanced Ciprofloxacin Removal from Aqueous Solution Using a Chemically Modified Biochar Derived from Bamboo Sawdust: Adsorption Process Optimization with Response Surface Methodology

Contamination of water by ciprofloxacin has become a significant concern due to its adverse health effects and growing evidence of antimicrobial-resistant gene evolution. To this end, a chemically modified bamboo biochar was prepared from bamboo sawdust to effectively remove ciprofloxacin (CIP) from an aqueous solution. Under similar adsorption conditions, the modified bamboo biochar (MBC) has an excellent CIP removal efficiency (96%) compared to unmodified bamboo biochar (UBC) efficiency (45%). Thus, MBC was used in batch adsorption experiments, and the process was optimized with the central composite design (CCD) framework of response surface methodology (RSM). Sorption process parameters such as initial CIP concentration, pH, adsorbent dose, and contact time were studied and found to have a significant effect on CIP removal. The optimal CIP removal (96%) was obtained at MBC dose (0.5 g L-1), CIP initial concentration (20 mg L-1), pH (7.5), and contact time (46 min). The adsorption kinetic data were well described by the pseudo-second-order model ( $R^2=0.999$ ), and both Langmuir ( $R^2=0.994$ ) and Freundlich ( $R^2=0.972$ ) models gave the best fit in CIP adsorption isotherm analysis. The maximum monolayer adsorption capacity of the MBC was 78.43 mg g-1 based on the Langmuir isotherm model. These results suggest that CIP adsorption was mainly controlled by chemisorption. Moreover, the CIP adsorption process was endothermic and spontaneous. Overall, MBC is a low-cost, efficient, and recyclable adsorbent for eliminating emerging contaminants such as ciprofloxacin from an aqueous solution.

Progress in microalgal mediated bioremediation systems for the removal of antibiotics and pharmaceuticals from wastewater

Worldwide demand for antibiotics and pharmaceutical products is continuously increasing for the control of disease and improvement of human health. Poor management and partial metabolism of these compounds result in the pollution of aquatic systems, leading to hazardous effects on flora, fauna, and ecosystems. In the past decade, the importance of microalgae in micropollutant removal has been widely reported. Microalgal systems are advantageous as their cultivation does not require additional nutrients: they can recover resources from wastewater and degrade antibiotics and pharmaceutical pollutants simultaneously. Bioadsorption, degradation, and accumulation are the main mechanisms involved in pollutant removal by microalgae. Integration of microalgae-mediated pollutant removal with other technologies, such as biodiesel, biochemical, and bioelectricity production, can make this technology more economical and efficient. This article summarizes the current scenario of antibiotic and pharmaceutical removal from wastewater using microalgae-mediated technologies.

The pH dependence and role of fluorinated substituent of enoxacin binding to ferrihydrite

The sorption of antibiotics on iron (hydr)oxides is an important process that influences their environmental fate. Ferrihydrite (Fh) nanosized iron hydroxide is omnipresent in nature. However, the sorption mechanism of fluoroquinolone (FQ) antibiotics on Fh is unclear. Here, a combined experimental and computational study was conducted to investigate the sorption of enoxacin (ENO) as one model of FQs on Fh. Pipemidic acid (PPA), as a structural analog of ENO, was selected to compare the effect of fluorinated substituent on the sorption mechanism. Results indicated that the average K_d values of ENO at pH = 7.0 and 8.0 were 1.72 and 2.75 times higher than those at pH in the ranges of 4.0-6.0 and 9.0-10.0, respectively. The main sorption mechanisms included electrostatic, hydrophobic interaction, and inner-sphere complexation. The fluorinated substituent of ENO facilitated its sorption on Fh through enhancing its hydrophobicity as well as modifying its dissociation constants and charge distribution. The findings give new insights into the significant influence of active fluorinated substituents on the environmental behaviors of fluorinated pharmaceuticals.

Colloidal biochar for enhanced adsorption of antibiotic ciprofloxacin in aqueous and synthetic hydrolyzed human urine matrices

Objectives of the present research were to examine the capacity of disc-milled high lignin biochar colloids (CBC) for the removal of ciprofloxacin (CPX) from aqueous solution and synthetic hydrolyzed human urine. In this study, adsorption of CPX was tested against the initial pH (3-10), ionic strength (0.001-0.1 M NaNO₃), resident time (up to 8 h), initial CPX concentration (5-100 mg/L) and temperature (25, 35, and 45 °C). The surface morphology was examined using Brunauer-Emmett-Teller (BET) specific surface area. The CBC was observed to be < 300 nm whereas the BET surface area was 284 m²/g. Best CPX adsorption demonstrated at pH 5-6 and however, indicated ionic strength dependency. Experimental kinetics data in aqueous media were well-fitted to the pseudo-second-order (r² of 0.98), while the Hill and Langmuir isotherm models best described the isotherm data (r² of 0.95 and 0.94, respectively) confirming chemisorption followed by physisorption interactions. The thermodynamics results indicate that CPX adsorption onto CBC is spontaneous (-ΔG), endothermic (+ΔH) and has increased randomness (+ΔS) in the aqueous system. The kinetic experimental data in synthetic urine matrix was fitted with Elovich (r² = 0.99) and fractional power (r² = 0.96) models whereas Hills (r² = 0.99) and Langmuir (r² = 0.97) models were the most fitted with isotherm data suggesting the adsorption of CPX on the CBC by chemisorption mechanisms. In conclusion, CBC demonstrated effective removal of CPX indicating its potential to be used in wastewater treatment.

Pyrolysis of marine algae for biochar production for adsorption of Ciprofloxacin from aqueous solutions

Biochars derived from three species of algae was synthesized by impregnating the green algae Ulva Ohnoi, red algae Agardhiella subulata, and brown algae Sargassum hemiphyllum with ZnCl₂ chemical activator and employed as a long-term adsorbent for ciprofloxacin (CIP) removal from water. The results revealed that combination of brown algae and ZnCl₂ chemical activator (ZBAB) successfully produced mesoporous biochar with excellent physicochemical characteristics and gave the best CIP adsorption capacity. The ZBAB yielded a high CIP adsorption capacity (190-300 mg g^-1) under various parameter effects (initial pH, temperature and major ions). Throughought the surface characterization techniques, the proposed adsorption mechanisms were electrostatic interaction, π-π EDA interaction, pore filling and hydrogen bonding. Moreover, not only algal biochars exhibited innovative and potential adsorbent for rapid and effective remediate pollution from water, but combination of algal biomass and ZnCl₂ activator also created renewable source of energy from biomass pyrolysis.

Efficient adsorptive removal of fluoroquinolone antibiotics from water by alkali and bimetallic salts co-hydrothermally modified sludge biochar

Fluoroquinolones are one of most commonly used antibiotics for preventing and treating bacterial infections and their unsatisfactory removal by conventional wastewater treatment technology have aroused widespread attention. A novel adsorbent of KMSBC was the first time synthesized and tested to adsorb three typical fluoroquinolone antibiotics of CIP, NOR and OFL from water. The characterization analysis showed that KMSBC possessed the superior porous structure, abundant functional groups and greater graphitic degree. Together with kinetics, isotherms, thermodynamics and critical factors (e.g., biochar dose, reaction time/temperature, fluoroquinolone antibiotics concentration, pH, co-existing ionic strength and HA concentration) analysis suggested that pore filling, π-π conjugation, H-bonding and electrostatic interaction were the key mechanisms for fluoroquinolone antibiotics adsorption by KMSBC. KMSBC exhibited the optimum adsorption performance at pH = 5 despite the adsorbates. The maximum adsorption capacity of KMSBC for CIP, NOR and OFL were 49.9, 55.7 and 47.4 mg/g at 25 °C, respectively. Also, KMSBC exhibited the good magnetic sensitivity and stability with the leaching concentrations of Fe were far below than environmental limit (GB5749-2006) at various pH (from 3 to 12), ionic strength and HA concentrations. Additionally, KMSBC performed a stable sustainable adsorption performance in recycles by NaOH regeneration. Thus, KMSBC had the potential to be a promising adsorbent for fluoroquinolone antibiotics removal with favorable adsorption capacity, environmental security and easy regeneration performance.

Combing phosphorus-modified hydrochar and zeolite prepared from coal gangue for highly effective immobilization of heavy metals in coal-mining contaminated soil

Considering the adverse effects of heavy metals (HMs) on agriculture soil, in-situ immobilization has been paid great attention worldwide. P-modified biochar/hydrochar along with synthetic zeolite for efficient HMs immobilization in contaminated soil becomes a promising choice. In this study, H₃PO₄-modified hydrochar (BPH) derived from banana peels, and Na-X zeolite (ZL) prepared from coal gangue was applied individually and synergistically (1%BPH, 2%BPH 1%ZL, 2%ZL, and 1%BPH+1%ZL) to remediate a farmland soil polluted by Cd, Cu, and Pb near the coal-mining area. Compared with the mono-application of these two amendments, their combination significantly improved the soil organic carbon (SOC), electric conductivity (EC), and dehydrogenase activity. Besides, the addition of 1%CLH+1%ZL remarkably reduced the Cd, Cu, and Pb bioavailability by 67.01%, 57.01%, and 78.72%, respectively, in the soil after 100 d incubation by transforming these metals to more stable forms. The order of the HMs immobilization capacity for these two amendments was as follows: Pb > Cu > Cd. Moreover, the dominated immobilization mechanism of their synergistic application was that BPH could immobilize HMs by precipitation, complexation, and π-π electron-donor-acceptor interaction. The precipitation and complexation blocked the surface pores of BPH. The sustained release of phosphorus groups and radicals was prevented. This obstacle was possibly alleviated by adding ZL. Besides, the formation of cationic bridging, the enhancement of soil properties, and the physical adsorption of these amendments were also conducive to HMs immobilization in soil. This work indicated that co-application of BPH and ZL possibly was an excellent choice for immobilizing HMs in soil.

Adsorption behavior of fluoroquinolone(ciprofloxacin) using zinc oxide impregnated activated carbon prepared from jack fruit peel: Kinetics and isotherm studies

Ciprofloxacin is a pharmaceutical component used for treating various tract infections. This is considered as an emerging contaminant due to the release of unreacted components getting disposed into the water bodies. This component is effectively treated using renewable biomass, which is converted into a useful renewable low-cost adsorbent material. Discarded Jack Fruit Peel (JFP) is used as an activated carbon incorporated with zinc oxide nanocomposite. The prepared activated carbon in this experiment was characterized by determining their functional groups, morphological characters, and nature of the adsorbent material by analyzing the Fourier Transform InfraRed (FTIR), Field Emission Scanning Electron Microscopy (FESEM), and X-ray Diffraction (XRD) characterization. Further, the prepared composite's correlation coefficients and equilibrium sorption of the adsorption process were calculated using Ultra Violet (UV)-Visible Spectroscopy and analyzed with isotherm models (Langmuir model, Freundlich model, and Temkin model) and kinetic models (Pseudo-first-order kinetics, Pseudo-second-order kinetics, Intraparticle diffusion model, and Elovich model). Among the different models, the Zinc oxide impregnated activated carbon show Freundlich Isotherm and Pseudo Second order equation having a maximum correlation with experimental studies indicating double-layer adsorption, which suggests that the process is chemisorption. The operational parameters, including the effect of pH, dosage of activated carbon, and contact time of adsorption was calculated to identify the optimal condition for maximum adsorption.

Preparation of H3PO4 modified Sidr biochar for the enhanced removal of ciprofloxacin from water

In this study, biochar was prepared from Sidr plant leaves and used for the treatment of ciprofloxacin (CIP)-contaminated water. CIP is important class of emerging water pollutants from pharmaceutical industries. The biochar showed 65% adsorption efficiency and 43.48 mg/g adsorption capacity of CIP. Adsorption efficiency as well as adsorption capacity were improved to 91% and 62.50 mg/g, respectively, by phosphoric acid (H₃PO₄) modified biochar. Removal of CIP by the prepared biochar was due to different surface functional groups of CIP and biochar as revealed from the study of different characterization analyses. The presence of PO₄^3- group in modified biochar led to maximum binding of CIP. Also, the modified biochar showed higher reusability potential and less leaching of ions when compared to the raw biochar. Removal of CIP was affected by concentrations of CIP, the amount of biochar and different pH's; the maximum removal of CIP was achieved at pH 4. The Freundlich and pseudo-first-order models best fitted the removal of CIP by modified biochar. Advanced characterization techniques were applied to investigate surface and physiological characteristics of the biochar and modified biochar. The modification showed high impact on the performance and stability of biochar. The study showed significant impacts of modification on the potential of the biochar for treatment of CIP-contaminated water.

Non-intuitive Behavior of Polymer-Ciprofloxacin Nanoconjugate Suspensions: a Tool for Flexible Oral Drug Delivery

Ciprofloxacin (CPX) is prone to spontaneous self-aggregation and formation of supramolecular dimers (π - π stacking) due to its complicated surface chemistry which has been associated with its anomalous solubility and instability in aqueous systems particularly near neutral pH. The surface characteristic of ciprofloxacin was modified through non-intuitive counterion interaction between CPX and diethylaminoethyl dextran (DDEX) to form nanoconjugate assembly. The CPX-DDEX nanoconjugate was confirmed by FTIR, SEM, DSC, TGA, and ¹H-NMR. The DSC thermograms showed a remarkable 20% reduction in the melting temperature (T_m) of CPX from 268.57±1.11°C to 214.36±1.0211°C and 78% reduction in enthalpy of fusion (ΔH_f) from 59.84 kJ/mol (180.59 J/g) to 12.90 kJ/mol (38.92 J/g), indicating increased solubility and dissolution efficiency. DDEX polymer alone exhibited pseudoplastic characteristics however with more viscous rather than elastic response, while the CPX-DDEX nanoconjugate suspensions exhibited remarkable elastic behavior with significantly increased storage modulus (G') thus controlling and extending the release of CPX. The reconstituted freeze-dried CPX-DDEX nanoconjugate suspension was chemically stable throughout the 90-day study both in the refrigerator and at controlled room temperature, while the aqueous suspension of pure CPX without DDEX was only stable for 72 and 24 h, respectively. The dissolution efficiency of the CPX-DDEX nanoconjugate suspensions increased with increasing molar concentration of DDEX to a maximum of 100% at 50 μM of DDEX followed by a remarkable decrease within the 3-week study. It was apparent that the dissolution efficiency was governed by a critical balance between the CPX solubility and the viscoelastic characteristics of the polymeric nanoassembly. This study demonstrates the potential application of polymer-drug nanoconjugation formulation design to stabilization and flexible delivery of CPX from aqueous suspension systems. Graphical abstract.