Biodegradation of microplastics: Better late than never

Aluminum and microplastic release from reflective agricultural films disrupt microbial communities and functions in soil

Reflective agricultural films are widely used in vegetable production and orchards to repel pests, accelerate fruit ripening, and boost yields. These films, composed of a plastic base metallized with aluminum (Al), degrade over time in soil, releasing Al and microplastics. This study investigated the aging and weathering of Al-coated reflective films (polyethylene terephthalate, PET-based) under UV radiation, simulated rainfall, and soil burial for up to 120 days, assessing the effects of released Al and microplastics on soil chemistry and microbial communities. Weathering was confirmed by the formation of C-O/CO functional groups, an increasing carbonyl index, and the oxidation of Al to Al₂O₃, as shown by Fourier-transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Faster Al-coated shedding and PET oxidation were observed in the soil environment. Microplastics (0.5 % w/w) from the films reduced soil micronutrient availability (Fe, Mn, Cu), suppressed functional genes involved in carbon, nitrogen, and phosphorus cycling, and shifted microbial communities towards oligotrophic bacteria enrichment (e.g., RB41, Candidatus_Udaeobacter, Gemmatimonadetes, and Chloroflexi) while reducing copiotrophic bacteria (e.g., Sphingomonas, Ellin6067, Dongia, Puia, and Flavisolibacter). Therefore, these findings highlight that reflective film weathering strongly alters soil nutrient content and microbial community composition, with potential implications for soil health and agricultural sustainability.

Microplastic aging and adsorption in the atmosphere, and their associated impacts on various spheres of the earth: A review

Microplastic (MPs, size <5 mm) is an emerging category of contaminants with detrimental effects on human health, climate, and ecology. The atmospheric pathway is a crucial transport route for the migration of MPs from source to receptor locations. This long-range transport leads to the ubiquitous presence of MPs across all environmental matrices and constrains the source-transport pathway-sink interaction. During atmospheric transport, MPs experience aging and adsorption as a result of interactions with winds, solar radiation, moisture, pH, and atmospheric pollutants, which alters their hydrophilicity, structure, surface area, size, color, and the capacity for adsorption, often resulting in elevated toxicity and associated risks. However, the multifaceted dynamics of atmospheric aging of MPs and consequent impacts are poorly understood. This review presents a critical assessment of three major factors that determine the nature and degree of MP aging and adsorption in the atmosphere, namely: intrinsic MP properties such as the degree of unsaturation, crystallinity, presence of functional groups, charge, specific surface area, and structural defects; environmental factors such as temperature, pH, moisture, and the presence of chemical species; and pollutant characteristics such as charge and hydrophilicity/hydrophobicity that influence adsorption, with an emphasis on potential mechanisms. Additionally, the review presents a comparative assessment of the critical factors and mechanisms responsible for aging and adsorption in atmosphere with those in other environmental media. Further, the potential impacts of atmospherically aged MPs on climate, the biosphere, cryosphere, pedosphere, and hydrosphere are summarized. The review finally identifies key knowledge gaps and outlines perspectives for future research.

Key adsorbents and influencing factors in the adsorption of micro- and nanoplastics: A review

Microplastics and nanoplastics (MNPs) are emerging contaminants in drinking water sources that pose serious risks to human health and ecosystems. Several removal strategies, such as adsorption, exist but present challenges for their industrial scalability. This review provides a concise overview of MNP adsorption mechanisms and highlights the limited but critical exploration of column adsorption in the literature, emphasizing its importance for large-scale applications. Special attention is given to carbon-based materials due to their cost-effectiveness, environmental friendliness and sustainability. Other adsorbents (e.g., metal-organic frameworks, clays) are also discussed for their promising performance in realistic water matrixes. To predict and optimize the efficiency of adsorbents, leading simulation models are reviewed. Taken together, this work provides a comprehensive overview of the fundamental factors, such as adsorption mechanisms, adsorbent selection and experimental conditions, to optimize MNP adsorption. By highlighting the underexplored area of column-based processes, it provides valuable information to advance adsorption as a viable industrial-scale solution for MNP contamination.

Comprehensive Review on Bio-Based Treatments for Polyvinyl Chloride Plastic

Polyvinyl chloride (PVC) plastics are widespread around the globe, and each year, thousands of tons of PVC end up in the environment in the form of micro-/nanoplastics. Literature has reported extensively on the biodegradation of its PVC additives/plasticizers; however, bio-based treatment approaches for its polymers have been scanty. The current review has discussed elaborately all possible PVC degradation processes and the toxicity challenges faced during its mitigation. This review has also delineated and assessed all physical, chemical, and biological approaches reported for PVC treatments. All the biodeterioration, biocatalysis, and biodegradation mechanisms reported for PVC have been comprehensively discussed. Recent advances have also been highlighted like the direct application of invertebrate species and selective enzymes like peroxidases, alkane monooxygenase, and laccase during PVC treatment. Insights of functional genomes/genes and OMICS have been recommended, which might help predict and address any future issues during the mitigation of PVC pollution in the environment.

Comparison of plastisphere microbiomes during the degradation of conventional and biodegradable mulching films

Biodegradable mulch films (BDMs) are becoming increasingly popular in agriculture and are emerging as an alternative to conventional polyethylene (PE) films. However, the intricate details surrounding the establishment and growth of microorganisms on BDMs and PE during their degradation in agricultural fields remain unclear. In this study, the succession of bacterial communities in farmland soil and the plastispheres of PE and BDMs were compared through 16S rRNA gene high-throughput sequencing and real-time PCR. The results unveiled noteworthy distinctions in bacterial community structures across different samples. Specifically, the α-diversity in the BDM plastispheres was markedly lower than in the PE plastisphere. Hydrogenophaga and Variovorax genera were abundantly present in the BDM plastisphere, whereas Mycobacterium demonstrated significant enrichment in the PE plastisphere. Functional annotations indicated high abundances of degradation-related and pathogen-related functions in both BDM and PE plastispheres. Furthermore, the BDM plastisphere exhibited lower network complexity and modularity and stronger competitive interactions than the PE plastisphere. The conducted iCAMP analysis showed that stochastic community assembly processes largely govern the PE plastisphere, while deterministic processes prevailed in BDMs and increased significantly over time. These findings shed light on different mulching materials' effects in farmland ecosystems and provide insights into potential ecological risks linked to their usage.

Biodegradable microplastics affect tomato (Solanum lycopersicum L.) growth by interfering rhizosphere key phylotypes

Biodegradable microplastics (BMPs), which form as biodegradable plastics degrade in agricultural settings, may influence plant growth and soil health. This study investigates the effects of BMPs on tomato growth and the microbial mechanisms involved. A greenhouse experiment applied BMPs-polyhydroxyalkanoate (PHA), polylactic acid (PLA), poly(butylene succinate-co-butylene adipate) (PBSA), and poly(butylene-adipate-co-terephthalate) (PBAT)-to tomato plants. The study analyzed their effects on plant growth, soil properties, and rhizosphere microbial communities. BMP treatments significantly reduced tomato biomass, height, and chlorophyll content compared to the control. PLA0.1 decreased the chlorophyll a/b ratio, while PLA1 increased it. Elemental analysis showed PLA1 increased phosphorus, calcium, and potassium in leaves, whereas all BMPs reduced nitrogen levels. BMPs also altered soil nitrogen and DOC levels, significantly shifting rhizosphere microbial communities, with a notable increase in Betaproteobacteria abundance. Ecological network analysis revealed that BMPs disrupted key microbial modules linked to plant growth. Beneficial modules positively associated with biomass and nutrient uptake were reduced under BMP treatments, whereas harmful microbial taxa in module 3, associated to poor plant health, were promoted. These shifts suggest that BMPs disrupt microbial ecological relationships critical for optimal plant growth. The findings highlight the potential negative impacts of BMPs on tomato growth through changes in microbial dynamics and soil properties.

Recent advances in recycling and upcycling of hazardous plastic waste: A review

Plastic is a widely used material across various industries, including construction, packaging, healthcare, and automotive, among others. Global plastic production was estimated at 311 million tonnes in 2014 and is expected to double within two decades, continuing to rise towards 2050. As plastic pollution poses significant environmental and health risks, effective recycling and upcycling strategies are crucial for sustainable waste management. This paper explores the impact of plastic waste on public health and ecosystems, reviews chemical, mechanical, and biological recycling methods, and examines upcycling approaches. It also addresses key challenges such as limitations in chemical upcycling, scaling up carbonization, and inefficiencies in sorting and processing for mechanical recycling. Additionally, recent innovations-including enzymatic depolymerization for PET recycling, upcycling plastic waste into advanced carbon materials like graphene and carbon nanotubes, photochemical and photocatalytic upcycling, PVC recycling via Cl-transfer systems, and advancements in mechanical recycling for multi-layer plastics-are discussed to highlight emerging solutions in plastic waste management. By addressing these challenges and gaps, this paper provides valuable insights into advancing plastic waste management through innovative recycling and upcycling technologies, paving the way for more sustainable and environmentally friendly solutions to combat global plastic pollution.

New insights into microbial degradation of polyethylene microplastic and potential polyethylene-degrading bacteria in sediments of the Pearl River Estuary, South China

Microplastics (MPs) are widely distributed pollutants in various ecosystems, and biodegradation is a crucial process for removal of MPs from environments. Pearl River Estuary, one of the largest estuaries in China, is an important reservoir for MPs with polyethylene MPs (PE-MPs) as the most abundant MPs. Here, biodegradation of PE-MPs and the potential PE-degrading bacteria in sediments of eight major outlets of Pearl River Estuary were firstly investigated. Results showed that biodegradation extent of PE-MPs varied for different sourced sediments, with highest extent for Hongqimen sediment and lowest extent for Jitimen sediment. Selective enrichment of specific bacteria occurred on PE-MPs with Pseudomonadaceae as the predominant family. Potential PE-degrading bacteria of Pseudomonas, Vulcaniibacterium, Cupriavidus, Bacillus were selectively enriched on PE-MPs and their abundance showed positive correlations with degradation extent of PE-MPs, indicating a vital role of them in degrading PE-MPs. Diverse pure cultured strains affiliated to the genera Bacillus, Pseudomonas, Priestia, Lysinibacillus, Marinobacter, Stutzerimonas and Achromobacter isolated from the plastispheres were capable of degrading PE-MPs rapidly, and members in Bacillus showed highest efffeciency of PE-MPs degradation with 6.5 % weight loss of PE-MPs within 40 days. This study provides a new perspective on the natural degradation potential by microbial communities in sediments.

Genomic insights and metabolic pathways of an enriched bacterial community capable of degrading polyethylene

In the face of mounting global plastic pollution, especially concerning microplastics, biodegradation must be a sustainable solution. The key factor driving this technology is to explore efficient plastic-biodegraders from different habitats, among which activated sludge (AS) may be an important option since it holds diverse microorganisms occupying various ecological niches. Here we intend to enrich the plastic-degrading microorganisms from AS by using polyethylene (PE) plastic as the carbon and energy source. After a 28-day incubation, the weight loss of PE films reached 3% and the hydrophobicity decreased, indicating physical biodegradation. Moreover, Fourier-transform infrared spectroscopy (FTIR) results showed the formation of several new oxygen-containing functional groups on PE. Microbial analysis extracted 26 metagenome-assembled genomes (MAGs) from the enriched microbial communities. Among them MAG10, MAG21 and MAG26 displayed the increased abundance upon PE addition and harbored abundant genes related to carbohydrate transport and metabolism, suggesting their potential to degrade PE. Additionally, functional analysis revealed 14 plastic degradation-related genes, including oxidase, laccase, and lipase, indicating the significant potential in plastic degradation. Furthermore, a pathway for synergistic biodegradation of PE was proposed based on the potential PE degradation genes retrieved from MAGs. This work offers a promising and sustainable solution to plastic pollution by enriching the potential biodegraders from AS.

Microplastic pollution in the marine environment: Distribution factors and mitigation strategies in different oceans

As the COVID-19 pandemic began in 2020, plastic usage spiked, and microplastic (MP) generation has increased dramatically. It is documented that MP can transfer from the source to the ocean environment where they accumulate as the destination. Therefore, it is essential to understand their transferring pathways and effective environmental factors to determine the distribution of MPs in the marine environment. This article reviews the environmental factors that affect MP distribution in the oceans including abiotic such as ocean currents and wind direction, physical/chemical and biological reactions of MPs, natural sinking, particle size and settling velocity, and biotic including biofouling, and incorporation in fecal material. It was found that velocity and physical shearing are the most important parameters for MP accumulation in the deep ocean. Besides, this review proposes different research-based, national-level, and global-level strategies for the mitigation of MPs after the pandemic. Based on the findings, the level of MP pollution in the oceans is directly correlated to coastal areas with high populations, particularly in African and Asian countries. Future studies should focus on establishing predictive models based on the movement and distribution of MPs to mitigate the levels of pollution.

Harmful impacts of microplastic pollution on poultry and biodegradation techniques using microorganisms for consumer health protection: A review

Microplastics (MPs) are small plastic particles less than five millimeters in size. Microplastic pollution poses a serious threat to ecosystems, affecting both biotic and abiotic components. Current techniques used to eliminate microplastics include recycling, landfilling, incineration, and biodegradation. Microplastics have been detected in various animal species, including poultry, fish, mammals, and invertebrates, indicating widespread exposure and potential bioaccumulation. In the Middle East, MPs contamination was discovered in chicken purchased from food shops, chain supermarkets, and open markets. The contamination levels ranged from 0.03±0.04 to 1.19±0.72 particles per gram of chicken meat. In poultry, microplastics negatively affect production and harm vital organs such as the kidneys, spleen, and lungs. In humans, exposure to microplastics can lead to inflammation, immune responses, metabolic disturbances, DNA damage, neurological damage, and even cancer upon contact with mucosal membranes or absorption into the body. Several studies have explored the use of microorganisms, including bacteria, fungi, and algae, to degrade microplastics, offering an economical and environmentally friendly solution. Different polymers were cultured with strains of Bacillus spp. (SB-14 and SC-9) and Streptococcus spp. (SC-56) for a duration of 40 days. Degradation rates for LDPE were 11.8 %, 4.8 %, and 9.8 %. The rates of deterioration for HDPE were 11.7 %, 3.8 %, and 13.7 %. Rates for polyester beads were 17.3 %, 9.4 %, and 5.8 %. This review focuses on the effects of microorganisms in removing microplastic pollution, the detrimental impact of microplastics on poultry production, and the connection between microplastic pollution and human health.

Insights into polyethylene biodegradative fingerprint of Pseudomonas citronellolis E5 and Rhodococcus erythropolis D4 by phenotypic and genome-based comparative analyses

Polyethylene (PE) is the most-produced polyolefin, and consequently, it is the most widely found plastic waste worldwide. PE biodegradation is under study by applying different (micro)organisms in order to understand the biodegradative mechanism in the majority of microbes. This study aims to identify novel bacterial species with compelling metabolic potential and strategic genetic repertoires for PE biodegradation. Pseudomonas citronellolis E5 is newly isolated from solid organic waste contaminated with plastic debris, and Rhodococcus erythropolis D4 was selected for its promising potential in biodegradable plastic determined by its genetic repertoire. P. citronellolis E5 was selected for its ability to grow on PE as the only carbon and energy source. Meaningful extracellular secreted laccase activity was also characterized for D4 during growth on PE (E5 and D4 strains have a laccase activity of (2 ± 1)×10-3 U mg-1 and (3 ± 1)×10-3 U mg-1, respectively). Despite the highest level of cell numbers recorded at 7 days of growth on PE for both strains, the patterns of the metabolic products obtained and degraded during 60 days on PE were dissimilar in the two bacteria at different sampling times. However, they mainly produced metabolites belonging to carboxylic acids and alkanes with varying numbers of carbons in the aliphatic chains. Whole-genome sequence analyses of P. citronellolis E5 compared to R. erythropolis D4 and genetic determinant prediction (by gene annotation and multiple sequence alignment with reference gene products) have been performed, providing a list of 16 and 42 gene products putatively related to different metabolic steps of PE biodegradation. Altogether, these results support insights into PE biodegradation by bacteria of the Pseudomonas and Rhodococcus genera from metabolic and genetic perspectives as a base to build up novel biotechnological platforms.

Biotransformation of microplastics from three-layer face masks by nitrifying-denitrifying consortia

COVID-19 increased microplastics (MP) contamination due to the extensive use of single-use personal protective equipment, particularly three-layer face masks. MP from face masks enter wastewater treatment plants (WWTPs), which were not designed to remove them. We utilized nitrifying-denitrifying microbial consortia and synthetic urban wastewater to evaluate the biotransformation of MP from each layer of three-layer face masks made of polypropylene (PP). The biotransformation carried out by the nitrifying-denitrifying consortia altered the surface of the outer, middle, and inner layers, as a consequence of the chemical modification of the PP-MP structure. Abiotic controls did not show changes on the physicochemical and thermal properties of PP-MP. Biotic tests showed increments in both the carbonyl and hydroxyl indices of the three layers in 42 days. The outer layer showed the greatest degree of biotransformation, which was consistent with morphological changes detected by scanning electron microscopy and in physicochemical properties such as crystallinity, evaporation, and fusion temperature. The nitrifying-denitrifying consortia, which removed 99 % of the total nitrogen from the synthetic urban wastewater, had several genera with proven capacity to biotransform MP such as Cephaloticoccus and Pseudomonas.

Biodegradation of untreated plasticizers-free linear low-density polyethylene films by marine bacteria

Polyethylene significantly contributes to marine plastic pollution. This study focuses on isolating bacteria from sea water and microplastic samples collected from the Tyrrhenian Sea and evaluating their ability to degrade virgin plasticizers-free linear low-density polyethylene (LLDPE) films. The isolates grew on the plastic film under aerobic conditions in shaken flasks leading to LLDPE mass losses of up to 2.597 ± 0.971 % after 60 days incubation. Biofilm formation on the film surface was confirmed by adhered protein quantification while film surface erosion and appearance of functional groups were revealed using SEM and FTIR analyses confirming biodegradation capabilities especially for isolates Bacillus velezensis MT9, Vreelandella venusta MT1 and Vreelandellatitanicae MT11. This is the first report on the biodegradation of plasticizers-free non pretreated LLDPE films by marine Bacillus sp. and Vreelandella sp.; most of the LLDPE biodegradation studies have been so far performed on plasticizer containing, pre-treated, or naturally weathered films.

Cutting-edge developments in plastic biodegradation and upcycling via engineering approaches

The increasing use of plastics has resulted in the production of high quantities of plastic waste that pose a serious risk to the environment. The upcycling of plastics into value-added products offers a potential solution for resolving the plastics environmental crisis. Recently, various microorganisms and their enzymes have been identified for their ability to degrade plastics effectively. Furthermore, many investigations have revealed the application of plastic monomers as carbon sources for bio-upcycling to generate valuable materials such as biosurfactants, bioplastics, and biochemicals. With the advancement in the fields of synthetic biology and metabolic engineering, the construction of high-performance microbes and enzymes for plastic removal and bio-upcycling can be achieved. Plastic valorization can be optimized by improving uptake and conversion efficiency, engineering transporters and enzymes, metabolic pathway reconstruction, and also using a chemo-biological hybrid approach. This review focuses on engineering approaches for enhancing plastic removal and the methods of depolymerization and upcycling processes of various microplastics. Additionally, the major challenges and future perspectives for facilitating the development of a sustainable circular plastic economy are highlighted.

Microplastics pollution in the marine environment: A review of sources, impacts and mitigation

Over the past few years, microplastics (MPs) pollution in the marine environment has emerged as a significant environmental concern. Poor management practices lead to millions of tons of plastic waste entering oceans annually, primarily from land-based sources like mismanaged waste, urban runoff, and industrial activities. MPs pollution in marine environments poses a significant threat to ecosystems and human health, as it adsorbs pollutants, heavy metals, and leaches additives such as plasticizers and flame retardants, thus contributing to chemical pollution. The review article provides a comprehensive overview of MPs pollution, its sources, and impacts on marine environments, including human health, detection techniques, and strategies for mitigating microplastic contamination in marine environments. The paper provides current information on microplastic pollution in marine environments, offering insights for researchers, policymakers, and the public, as well as promoting sustainable practices to protect the environment.

ATR-FTIR characterisation of daily-use plastics mycodegradation

Synthetic polymers, such as plastics, have permeated all aspects of modern life, and nowadays plastic pollution is a major environmental problem. Mycodegradation of these polymers could represent part of the solution to this problem since it calls on a broad toolbox of enzymes and applies non-enzymatic mechanisms to degrade and deteriorate recalcitrant materials. However, not enough is known about this ability for most of the representatives of the fungal kingdom. Another bottleneck is the harmonisation of technologies to analyse plastic degradation. This work involved the design of a biodegradation experiment, where the potential of four fungi representative of Dikarya and Penicillia (Funalia floccosa, Trametes versicolor, Pycnoporus cinnabarinus and Penicillium oxalicum) were tested on their ability to deteriorate the six most used plastics based on gravimetry and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). The following correlation between changes in the band signals and the loss of mass after treatment was determined using polyethylene terephthalate, polypropylene, polyethylene, poly vinyl chloride, high density polyethylene, low density polyethylene and nylon. After treatment, the decrease in absorbance of the characteristic bands of the plastics was taken as an indication of the degradation of the corresponding bonds/functionalities. The four fungi used could transform CH, CH2, CH3, CO, CO, CN, NH and CCl bonds. The best result was obtained using the fungus F. floccosa with 90-day treatments for high density polyethylene (∼ 62.0 %), low density polyethylene (∼ 23.6 %) and nylon (∼ 35.6 %). Therefore, mycodegradation could open up new doors in the fight against plastic pollution.

Protection over restoration to ensure water sustainability

Plastics pollution, persistent chemical contamination and inadequately treated wastewater are three key aspects that hinder access to safe and affordable water for all. We argue that a strong priority on pollution avoidance, research for remediation, and tighter regulation and monitoring must be implemented to make progress.

Insight into the removal of nanoplastics and microplastics by physical, chemical, and biological techniques

Plastic pollutants create health crises like physical damage to tissues, upset reproductive processes, altered behaviour, oxidative stress, neurological disorders, DNA damage, gene expression, and disrupt physiological functions, as the biosphere accumulates them inadvertently through the food web. Water resources have become the generic host of plastic wastes irrespective of their particle size, resulting in widespread distribution in aquatic environments. The pre-treatment step of the traditional water treatment process can easily remove coarse-sized plastic wastes. However, the fine plastic particles, with sizes ranging from nanometres to millimetres, are indifferent to the traditional water treatment. To address the escalating problems, the upgradation of different traditional physical, chemical, and biological remediation techniques offers a promising avenue for tackling tiny plastic particles from the water environment. Further, new techniques and hybrid incorporations to the existing water treatment techniques have been explored, specifically removing tiny plastic debris. A detailed understanding of the sources, fate, and impact of plastic wastes in the environment, as well as an evaluation of the above treatment techniques and their limitations and challenges, can only show the way for their upgradation, hybridization, and development of new techniques. This review paper provides a comprehensive overview of the current knowledge and techniques for the remediation of nanoplastics and microplastics.

Application of metal-organic frameworks for photocatalytic degradation of microplastics: Design, challenges, and scope

Microplastics (MPs), plastic particles smaller than 5 mm, are pervasive pollutants challenging wastewater treatment due to their size and hydrophobicity. They infiltrate freshwater, marine, and soil environments, posing ecological threats. In marine settings, MPs ingested by organisms cause cytokine release, cellular and DNA damage, and inflammation. As MPs enter the food chain and disrupt biological processes, their degradation is crucial. While biodegradation, pyrolysis, and chemical methods have been extensively studied, the use of metal-organic frameworks (MOFs) for MP pollution mitigation is underexplored. In this study, we explored the photocatalytic degradation mechanisms of MPs by MOFs in aquatic environments. We analyzed the hydrolysis, oxidation, and adsorption processes, while focusing on the environmentally friendly and cost-effective photocatalytic approach. Additionally, we analyzed the literature on MP decomposition for various types of MOFs, providing a detailed understanding of the degradation mechanisms specific to each MOF. Furthermore, we evaluated the degradation efficiencies of different MOFs and discussed the challenges and limitations in their application. Our study highlights the need for an integrated approach that involves the application of MOFs while considering environmental factors and safety concerns to develop effective MP degradation models. This review provides a framework for developing reliable photocatalytic materials with high MP removal and degradation efficiencies, thereby promoting the use of MOFs for marine plastic pollution mitigation.

Effects of polypropylene micro(nano)plastics on soil bacterial and fungal community assembly in saline-alkaline wetlands

Microplastic pollution is a major environmental threat, especially to terrestrial ecosystems. To better understand the effects of microplastics on soil microbiota, the influence of micro- to nano-scale polypropylene plastics was investigated on microbial community diversity, functionality, co-occurrence, assembly, and their interaction with soil-plant using high-throughput sequencing approaches and multivariate analyses. The results showed that polypropylene micro/nano-plastics mainly reduced bacterial diversity, not fungal, and that plastic size had a stronger effect than concentration on the assembly of microbial communities. Nano-plastics decreased the complexity and connectivity of both bacterial and fungal networks compared to micro-plastics. Moreover, bacteria were more sensitive and deterministic to polypropylene micro/nano-plastic stress than fungi, as shown by their different growth rates, guanine-cytosine content, and cell structure. Interestingly, the dominant ecological process for bacteria shifted from stochastic drift to deterministic selection with polypropylene micro/nano-plastic exposure. Furthermore, nano-plastics directly or indirectly disrupted the interactions within intra-microbes and between soil-bacteria-plant by altering soil nutrients and stoichiometry (C:N:P) or plant diversity. Collectively, the results indicate that polypropylene nano-plastics pose more ecological risks to soil microbes and their plant-soil interactions. This study sheds light on the potential ecological consequences of polypropylene micro/nano-plastic pollution in terrestrial ecosystems.

A carbon-based bifunctional heterogeneous enzyme: toward sustainable pollution control

We present a study on an immobilized functional enzyme (IFE), a novel biomaterial with exceptional sustainability in enzyme utility, widely employed across various fields worldwide. However, conventional carriers are prone to eroding the active functional domain of the IFE, thereby weakening its intrinsic enzyme activity. Consequently, there is a burgeoning interest in developing next-generation IFEs. In this study, we engineered a carbon-based bifunctional heterogeneous enzyme (MIP-AMWCNTs@lipase) for the intelligent recognition of di(2-ethylhexyl)phthalate (DEHP), a common plasticizer. The heterogeneous enzyme contains a bifunctional structural domain that both enriches and degrades DEHP. We investigated its dual-response performance for the enrichment and specific removal of DEHP. The imprinting factor of the carrier for DEHP was 3.4, demonstrating selectivity for DEHP. The removal rate reached up to 94.2% over a short period. The heterogeneous enzyme exhibited robust activity, catalytic efficiency, and excellent stability under harsh environmental conditions, retaining 77.7% of its initial lipase activity after 7 cycles. Furthermore, we proposed a stepwise heterogeneous enzyme reaction kinetic model based on the Michaelis-Menten equation to enhance our understanding of enzyme reaction kinetics. Our study employs a dual-effect recognition strategy of molecular blotting and enzyme immobilization to establish a method for the removal of organic pollutants. These findings hold significant implications for the fields of biomaterials and environmental science.

Microplastic dilemma: Assessing the unexpected trade-offs between biodegradable and non-biodegradable forms on plant health, cadmium uptake, and sediment microbial ecology

Despite extensive substitution of biodegradable plastics (BPs) for conventional plastics (CPs), research on their environmental ecological consequences as microplastics (MPs) is scarce. This study aimed to fill this gap by investigating the impacts of six prototypical MPs (categorized into BMPs and CMPs) on plant growth, cadmium (Cd) translocation, and bacterial communities in contaminated sediments. Results showed both BMPs and CMPs hindered plant development; yet interestingly, BMPs provoked more pronounced physiological and biochemical changes alongside increased oxidative stress due to reactive oxygen species accumulation. Notably, most MP types promoted the absorption of Cd by plant roots potentially via a "dilution effect". BMPs also induced larger shifts in soil microbial metabolic functions compared to CMPs. Ramlibacter was identified as a key biomarker distinguishing BMPs from CMPs, with link to multiple N metabolic pathways and N assimilation. This study offers novel insights into intricate biochemical mechanisms and environmental chemistry behaviors underpinning MP-Cd interactions within the plant-microbe-sediment system, emphasizing BMPs' higher potential ecological risks based on their significant effects on plant health and microbial ecology. This work contributes to enhancing the comprehensive understanding of their ecological implications and potential threats to environmental security.

Degradation of PET microplastic particles to monomers in human serum by PETase

More than 8 billion tons of plastic waste has been generated, posing severe environmental consequences and health risks. Due to prolonged exposure, microplastic particles are found in human blood and other bodily fluids. Despite a lack of toxicity studies regarding microplastics, harmful effects for humans seem plausible and cannot be excluded. As small plastic particles readily translocate from the gut to body fluids, enzyme-based treatment of serum could constitute a promising future avenue to clear synthetic polymers and their corresponding oligomers via their degradation into monomers of lower toxicity than the material they originate from. Still, whereas it is known that the enzymatic depolymerization rate of synthetic polymers varies by orders of magnitude depending on the buffer and media composition, the activity of plastic-degrading enzymes in serum was unknown. Here, we report how an engineered PETase, which we show to be generally trans-selective via induced fit docking, can depolymerize two different microplastic-like substrates of the commodity polymer polyethylene terephthalate (PET) into its non-toxic monomer terephthalic acid (TPA) alongside mono(2-hydroxyethyl)terephthalate (MHET) in human serum at 37 °C. We show that the application of PETase does not influence cell viability in vitro. Our work highlights the potential of applying biocatalysis in biomedicine and represents a first step towards finding a future solution to the problem that microplastics in the bloodstream may pose.

Critical review on unveiling the toxic and recalcitrant effects of microplastics in aquatic ecosystems and their degradation by microbes

Production of synthetic plastic obtained from fossil fuels are considered as a constantly growing problem and lack in the management of plastic waste has led to severe microplastic pollution in the aquatic ecosystem. Plastic particles less than 5mm are termed as microplastics (MPs), these are pervasive in water and soil, it can also withstand longer period of time with high durability. It can be broken down into smaller particles and can be adsorbed by various life-forms. Most marine organisms tend to consume plastic debris that can be accumulated easily into the vertebrates, invertebrates and planktonic entities. Often these plastic particles surpass the food chain, resulting in the damage of various organs and inhibiting the uptake of food due to the accumulation of microplastics. In this review, the physical and chemical properties of microplastics, as well as their effects on the environment and toxicity of their chemical constituents are discussed. In addition, the paper also sheds light on the potential of microorganisms such as bacteria, fungi, and algae which play a pivotal role in the process of microplastics degradation. The mechanism of microbial degradation, the factors that affect degradation, and the current advancements in genetic and metabolic engineering of microbes to promote degradation are also summarized. The paper also provides information on the bacterial, algal and fungal degradation mechanism including the possible enzymes involved in microplastic degradation. It also investigates the difficulties, limitations, and potential developments that may occur in the field of microbial microplastic degradation.

Review of nomenclature and methods of analysis of polyethylene terephthalic acid hydrolyzing enzymes activity

Enzymatic degradation of polyethylene terephthalic acid (PET) has been gaining increasing importance. This has resulted in a significant increase in the search for newer enzymes and the development of more efficient enzyme-based systems. Due to the lack of a standard screening process, screening new enzymes has relied on other assays to determine the presence of esterase activity. This, in turn, has led to various nomenclatures and methods used to describe them and measure their activity. Since all PET-hydrolyzing enzymes are α/β hydrolases, they catalyze a serine nucleophilic attack and cleave an ester bond. They are lipases, esterases, cutinases and hydrolases. This has been used interchangeably, leading to difficulties while comparing results and evaluating progress. This review discusses the varied enzyme nomenclature being adapted, the different assays and analysis methods reported, and the strategies used to increase PET-hydrolyzing enzyme efficiency. A section on the various ways to quantify PET hydrolysis is also covered.

Harnessing photosynthetic microorganisms for enhanced bioremediation of microplastics: A comprehensive review

Mismanaged plastics, upon entering the environment, undergo degradation through physicochemical and/or biological processes. This process often results in the formation of microplastics (MPs), the most prevalent form of plastic debris (<1 mm). MPs pose severe threats to aquatic and terrestrial ecosystems, necessitating innovative strategies for effective remediation. Some photosynthetic microorganisms can degrade MPs but there lacks a comprehensive review. Here we examine the specific role of photoautotrophic microorganisms in water and soil environments for the biodegradation of plastics, focussing on their unique ability to grow persistently on diverse polymers under sunlight. Notably, these cells utilise light and CO2 to produce valuable compounds such as carbohydrates, lipids, and proteins, showcasing their multifaceted environmental benefits. We address key scientific questions surrounding the utilisation of photosynthetic microorganisms for MPs and nanoplastics (NPs) bioremediation, discussing potential engineering strategies for enhanced efficacy. Our review highlights the significance of alternative biomaterials and the exploration of strains expressing enzymes, such as polyethylene terephthalate (PET) hydrolases, in conjunction with microalgal and/or cyanobacterial metabolisms. Furthermore, we delve into the promising potential of photo-biocatalytic approaches, emphasising the coupling of plastic debris degradation with sunlight exposure. The integration of microalgal-bacterial consortia is explored for biotechnological applications against MPs and NPs pollution, showcasing the synergistic effects in wastewater treatment through the absorption of nitrogen, heavy metals, phosphorous, and carbon. In conclusion, this review provides a comprehensive overview of the current state of research on the use of photoautotrophic cells for plastic bioremediation. It underscores the need for continued investigation into the engineering of these microorganisms and the development of innovative approaches to tackle the global issue of plastic pollution in aquatic and terrestrial ecosystems.

UVB-Aged Microplastics and Cellular Damage: An in Vitro Study

Plastics are synthetic organic compounds whose widespread use generates enormous waste. Different processes, such as mechanical abrasion, microbiological activity, and UVB irradiation, can fragment the plastic material and generate microplastics (MPs). MPs are ubiquitous, and various organisms, including humans, can ingest or inhale them, with potential adverse health effects. The differences between UV-aged and virgin particles were studied to evaluate the genotoxic damage and oxidative stress induced by polystyrene MPs with 1 and 5 µm sizes on the monocyte-like cell line (THP-1). Fourier transform infrared spectroscopy and Ζ-potential measurements were used to characterise MP particles after UVB exposure. Cells exposed to MPs show a widespread change in the cellular environment with the generation of reactive oxidative species (ROS), as indicated by the increased malondialdehyde level. The occurrence of genotoxic damage is correlated to the smaller size and ageing state of the MPs. The biochemical and genomic alterations observed in this in vitro study suggest that MPs, ubiquitous pollutants, following natural degradation and oxidation processes can cause various adverse effects on the health of the exposed population, making it necessary to carry out further studies to better define the real risk.

Progress and Prospects of Microplastic Biodegradation Processes and Mechanisms: A Bibliometric Analysis

In order to visualize the content and development patterns of microplastic biodegradation research, the American Chemical Society (ACS), Elsevier, Springer Link, and American Society for Microbiology (ASM) were searched for the years 2012-2022 using Citespace and VOSvivewer for bibliometrics and visual analysis. The biodegradation processes and mechanisms of microplastics were reviewed on this basis. The results showed a sharp increase in the number of publications between 2012 and 2022, peaking in 2020-2021, with 62 more publications than the previous decade. The University of Chinese Academy of Sciences (UCAS), Northwest A&F University (NWAFU), and Chinese Academy of Agricultural Sciences (CAAS) are the top three research institutions in this field. Researchers are mainly located in China, The United States of America (USA), and India. Furthermore, the research in this field is primarily concerned with the screening of functional microorganisms, the determination of functional enzymes, and the analysis of microplastic biodegradation processes and mechanisms. These studies have revealed that the existing functional microorganisms for microplastic biodegradation are bacteria, predominantly Proteobacteria and Firmicutes; fungi, mainly Ascomycota; and some intestinal microorganisms. The main enzymes secreted in the process are hydrolase, oxidative, and depolymerization enzymes. Microorganisms degrade microplastics through the processes of colonization, biofilm retention, and bioenzymatic degradation. These studies have elucidated the current status of and problems in the microbial degradation of microplastics, and provide a direction for further research on the degradation process and molecular mechanism of functional microorganisms.

Occurrence and abundance of microplastics and plasticizers in landfill leachate from open dumpsites in Sri Lanka

This is the first attempt that investigate the abundance of plasticizers in leachate sediment in the scientific literature, alongside the debut effort to explore the abundance of microplastics and plasticizers in landfill leachate and sediment in Sri Lanka. Microplastics in sizes ranging from ≥2.0-5.0, ≥1.0-2.0, and ≥ 0.5-1.0 mm were extracted from the leachate draining from ten municipal solid waste open dump sites and sediment samples covering seven districts. Microplastics were extracted by density separation (Saturated ZnCl2) followed by wet peroxide digestion and the chemical identification was conducted by Fourier Transform Infrared spectroscopy. Plasticizers were extracted to hexane and analyzed by high-performance liquid chromatography. The total mean microplastic abundance in leachate was 2.06 ± 0.62 mg/L whereas it was 363 ± 111 mg/kg for leachate sediments. The most frequently found polymer type was polyethylene (>50%), and white color was dominant. The average concentration of bisphenol A (BPA), benzophenone (BP) and diethyl-hydrogen phthalate (DHEP) in leachate was 158 ± 84.4, 0.75 ± 0.16 and 170 ± 85.8 μg/L respectively. Furthermore, BP and DHEP in leachate sediment was 100 ± 68.3 and 1034 ± 455 μg/kg respectively. As landfill leachate is directly discharged into nearby surface and groundwater bodies that serve as sources of drinking water, the study highlights the potential concerns of microplastic and plasticizer exposure to the surrounding Sri Lankan community through consumption of contaminated drinking water. Therefore, there is a timely need of develop the effective waste management and pollution control measures to minimize the possible threats to both the environment and human health.

Advances in microbial exoenzymes bioengineering for improvement of bioplastics degradation

Plastic pollution has become a major global concern, posing numerous challenges for the environment and wildlife. Most conventional ways of plastics degradation are inefficient and cause great damage to ecosystems. The development of biodegradable plastics offers a promising solution for waste management. These plastics are designed to break down under various conditions, opening up new possibilities to mitigate the negative impact of traditional plastics. Microbes, including bacteria and fungi, play a crucial role in the degradation of bioplastics by producing and secreting extracellular enzymes, such as cutinase, lipases, and proteases. However, these microbial enzymes are sensitive to extreme environmental conditions, such as temperature and acidity, affecting their functions and stability. To address these challenges, scientists have employed protein engineering and immobilization techniques to enhance enzyme stability and predict protein structures. Strategies such as improving enzyme and substrate interaction, increasing enzyme thermostability, reinforcing the bonding between the active site of the enzyme and substrate, and refining enzyme activity are being utilized to boost enzyme immobilization and functionality. Recently, bioengineering through gene cloning and expression in potential microorganisms, has revolutionized the biodegradation of bioplastics. This review aimed to discuss the most recent protein engineering strategies for modifying bioplastic-degrading enzymes in terms of stability and functionality, including enzyme thermostability enhancement, reinforcing the substrate binding to the enzyme active site, refining with other enzymes, and improvement of enzyme surface and substrate action. Additionally, discovered bioplastic-degrading exoenzymes by metagenomics techniques were emphasized.

Occurrence, bioaccumulation, fate, and risk assessment of emerging pollutants in aquatic environments: A review

Significant concerns on a global scale have been raised in response to the potential adverse impacts of emerging pollutants (EPs) on aquatic creatures. We have carefully reviewed relevant research over the past 10 years. The study focuses on five typical EPs: pharmaceuticals and personal care products (PPCPs), per- and polyfluoroalkyl substances (PFASs), drinking water disinfection byproducts (DBPs), brominated flame retardants (BFRs), and microplastics (MPs). The presence of EPs in the global aquatic environment is source-dependent, with wastewater treatment plants being the main source of EPs. Multiple studies have consistently shown that the final destination of most EPs in the water environment is sludge and sediment. Simultaneously, a number of EPs, such as PFASs, MPs, and BFRs, have long-term environmental transport potential. Some EPs exhibit notable tendencies towards bioaccumulation and biomagnification, while others pose challenges in terms of their degradation within both biological and abiotic treatment processes. The results showed that, in most cases, the ecological risk of EPs in aquatic environments was low, possibly due to potential dilution and degradation. Future research topics should include adding EPs detection items for the aquatic environment, combining pollution, and updating prediction models.

Biodegradation of polyethylene (PE), polypropylene (PP), and polystyrene (PS) microplastics by floc-forming bacteria, Bacillus cereus strain SHBF2, isolated from a commercial aquafarm

The ubiquitous proximity of the commonly used microplastic (MP) particles particularly polyethylene (PE), polypropylene (PP), and polystyrene (PS) poses a serious threat to the environment and human health globally. Biological treatment as an environment-friendly approach to counter MP pollution has recent interest when the bio-agent has beneficial functions in their ecosystem. This study aimed to utilize beneficial floc-forming bacteria Bacillus cereus SHBF2 isolated from an aquaculture farm in reducing the MP particles (PE, PP, and PS) from their environment. The bacteria were inoculated for 60 days in a medium containing MP particle as a sole carbon source. On different days of incubation (DOI), the bacterial growth analysis was monitored and the MP particles were harvested to examine their weight loss, surface changes, and alterations in chemical properties. After 60 DOI, the highest weight loss was recorded for PE, 6.87 ± 0.92%, which was further evaluated to daily reduction rate (k), 0.00118 day-1, and half-life (t1/2), 605.08 ± 138.52 days. The OD value (1.74 ± 0.008 Abs.) indicated the higher efficiency of bacteria for PP utilization, and so for the colony formation per define volume (1.04 × 1011 CFU/mL). Biofilm formation, erosions, cracks, and fragments were evident during the observation of the tested MPs using the scanning electron microscope (SEM). The formation of carbonyl and alcohol group due to the oxidation and hydrolysis by SHBF2 strain were confirmed using the Fourier transform infrared spectroscopic (FTIR) analysis. Additionally, the alterations of pH and CO2 evolution from each of the MP type ensures the bacterial activity and mineralization of the MP particles. The findings of this study have confirmed and indicated a higher degree of biodegradation for all of the selected MP particles. B. cereus SHBF2, the floc-forming bacteria used in aquaculture, has demonstrated a great potential for use as an efficient MP-degrading bacterium in the biofloc farming system in the near future to guarantee a sustainable green aquaculture production.

Generation of synthetic FTIR spectra to facilitate chemical identification of microplastics

In a context where learning databases of microplastic FTIR spectra are often incomplete, the objective of our work was to test whether a synthetic data generation method could be relevant to fill the gaps. To this end, synthetic spectra were generated to create new databases. The effectiveness of machine learning from these databases was then tested and compared with previous results. The results showed that the creation of synthetic learning databases could avoid, to a certain extent, the need for learning databases of environmental microplastics FTIR spectra. However, some limitations were encountered, for example, when two different chemical classes had very similar reference spectra or when the intensities of the bands associated with fouling became too intense. The FTIR study of the ageing and fouling of microplastics in the natural environment is one of the identified ways that could further improve this approach.

An insight decipher on photocatalytic degradation of microplastics: Mechanism, limitations, and future outlook

Plastic material manufacturing and buildup over the past 50 years has significantly increased pollution levels. Microplastics (MPs) and non-biodegradable residual plastic films have become the two most pressing environmental issues among the numerous types of plastic pollution. These tiny plastic flakes enter water systems from a variety of sources, contaminating the water. Since MPs can be consumed by people and aquatic species and eventually make their way into the food chain, their presence in the environment poses a serious concern. Traditional technologies can remove MPs to some extent, but their functional groups, stable covalent bonds, and hydrophobic nature make them difficult to eliminate completely. The urgent need to develop a sustainable solution to the worldwide contamination caused by MPs has led to the exploration of various techniques. Advanced oxidation processes (AOPs) such as photo-catalytic oxidation, photo-degradation, and electrochemical oxidation have been investigated. Among these, photocatalysis stands out as the most promising method for degrading MPs. Photocatalysis is an environmentally friendly process that utilizes light energy to facilitate a chemical reaction, breaking down MPs into carbon dioxide and water-soluble hydrocarbons under aqueous conditions. In photocatalysis, semiconductors act as photocatalysts by absorbing energy from a light source, becoming excited, and generating reactive oxygen species (ROS). These ROS, including hydroxyl radicals (•OH) and superoxide ions ( [Formula: see text] ), play a crucial role in the degradation of MPs. This extensive review provides a detailed exploration of the mechanisms and processes underlying the photocatalytic removal of MPs, emphasizing its potential as an efficient and environmentally friendly approach to address the issue of plastic pollution.

The aging behavior of degradable plastic polylactic acid under the interaction of environmental factors

Microplastics leaching from aging biodegradable plastics pose potential environmental threats. This study used response surface methodology (RSM) to investigate the impact of temperature, light, and humidity on the aging characteristics of polylactic acid (PLA). Key evaluation metrics included the C/O ratio, functional groups, crystallinity, surface topography, and mechanical properties. Humidity was discovered to have the greatest effect on the ageing of PLA, followed by light and temperature. The interactions between temperature and light, as well as humidity and sunlight, significantly impact the aging of PLA. XPS analysis revealed PLA underwent aging due to the cleavage of the ester bond (O-C=O), resulting in the addition of C=O and C-O. The aging process of PLA was characterized by alterations in surface morphology and augmentation in crystallinity, resulting in a decline in both tensile strength and elongation. These findings might offer insights into the aging behavior of degradable plastics under diverse environmental conditions.

Polymer Waste Recycling of Injection Molding Purges with Softening for Cutting with Fresnel Solar Collector-A Real Problem Linked to Sustainability and the Circular Economy

A plastic injection waste known as "purge" cannot be reintegrated into the recycling chain due to its shape, size, and composition. Grinding these cannot be carried out with traditional mills due to significant variations in size and shape. This work proposes a process and the design of a device that operates with solar energy to cut the purges without exceeding the degradation temperature. The size reduction allows reprocessing, revalorization, and handling. The purges are mixtures of processed polymers, so their characterization information is unavailable. Some characterizations were conducted before the design of the process and after the cut of the purges. Some of the most representative purges in a recycling company were evaluated. The flame test determines that all material mixtures retain thermoplasticity. The hardness (Shore D) presented changes in four of the purges being assessed, with results in a range of 59-71 before softening and 60-68 after softening. Young's modulus was analyzed by the impulse excitation technique (IET), which was 2.38-3.95 GPa before softening and 1.7-4.28 after softening. The feasibility of cutting purges at their softening temperature was evaluated. This was achieved in all the purges evaluated at 250-280 °C. FTIR allowed for corroboration of no significant change in the purges after softening. The five types of purges evaluated were polypropylene-ABS, polycarbonate-ABS-polypropylene, yellow nylon 66, acetal, and black nylon 66 with fillers, and all were easily cut at their softening temperature, allowing their manipulation in subsequent process steps.

Advances in chemical removal and degradation technologies for microplastics in the aquatic environment: A review

In recent years, global attention has been extensively focused on the water pollution and health risks caused by microplastics(MPs), thereby making the treatment of microplastics a key area of research. Chemical removal and degradation present effective approaches to addressing this issue. Consequently, this review summarizes the latest research advancements in the chemical removal and degradation of microplastics in water, comparing the treatment efficacy and advantages and disadvantages of various removal/degradation techniques. It elucidates the chemical mechanisms underlying the removal/degradation of microplastics and identifies the primary influencing factors during the treatment process. A systematic analysis of the performance of microplastic treatment technologies is conducted, examining the impact of microplastic characteristics, operational conditions, and other parameters on the effectiveness of microplastic treatment.

Can bioplastics always offer a truly sustainable alternative to fossil-based plastics?

Bioplastics, comprised of bio-based and/or biodegradable polymers, have the potential to play a crucial role in the transition towards a sustainable circular economy. The use of biodegradable polymers not only leads to reduced greenhouse gas emissions but also might address the problem of plastic waste persisting in the environment, especially when removal is challenging. Nevertheless, biodegradable plastics should not be considered as substitutes for proper waste management practices, given that their biodegradability strongly depends on environmental conditions. Among the challenges hindering the sustainable implementation of bioplastics in the market, the development of effective downstream recycling routes is imperative, given the increasing production volumes of these materials. Here, we discuss about the most advisable end-of-life scenarios for bioplastics. Various recycling strategies, including mechanical, chemical or biological (both enzymatic and microbial) approaches, should be considered. Employing enzymes as biocatalysts emerges as a more selective and environmentally friendly alternative to chemical recycling, allowing the production of new bioplastics and added value and high-quality products. Other pending concerns for industrial implementation of bioplastics include misinformation among end users, the lack of a standardised bioplastic labelling, unclear life cycle assessment guidelines and the need for higher financial investments. Although further research and development efforts are essential to foster the sustainable and widespread application of bioplastics, significant strides have already been made in this direction.

Isolation, characteristics, and poly(butylene adipate-co-terephthalate) (PBAT) degradation mechanism of a marine bacteria Roseibium aggregatum ZY-1

Marine microorganisms have been reported to degrade microplastics. However, the degradation mechanisms are still poorly understood. In this study, a bacterium Roseibium aggregatum ZY-1 was isolated from seawater, which can degrade poly(butylene adipate-co-terephthalate) (PBAT). The PBAT-PLA(polylactic acid, PLA) films, before and after degradation, were characterized by scanning electron microscope (SEM) and Fourier transform infrared spectrometer (FTIR), the weight loss rate and water contact angle were measured. The results indicate that ZY-1 colonized on PBAT-PLA film, changed the functional groups and decreased water contact angle of PBAT-PLA film. Moreover, liquid chromatography mass spectrometry (LC-MS) analysis reveales that PBAT was degraded into its oligomers (TB, BTB) and monomers (T, A) during 10 days, and adipic acid (A) could be used as a sole carbon source. The whole genome sequencing analyses illustrate the mechanisms and enzymes such as PETase, carboxylesterases, arylesterase (PpEst) and genes like pobA, pcaBCDFGHIJKT, dcaAEIJK, paaGHJ involved in PBAT degradation. Therefore, the R. aggregatum ZY-1 will be a promising candidate of PBAT degradation.

Bacterial screening in Indian coastal regions for efficient polypropylene microplastics biodegradation

Polypropylene based medical devices significantly increased production and usage in COVID-19 pandemic states, and this material is very resilient in the environment. Thus, more than ever, rapid action is needed to reduce this pollution. This study focuses on the degradation of polypropylene microplastics (PP MPs) by unique marine bacterial strains obtained from the Thoundi (Bacillus tropicus, Bacillus cereus, Stenotrophomonas acidaminiphila, and Brucella pseudintermedia) and Rameshwaram coasts (Bacillus cereus). Those above five bacterial strains were chosen after preliminary screening of their hydrophobicity, biofilm-forming capabilities, and responsiveness to the zone of clearance technique. During the biodegradation process (28 days), the growth, metabolic activity, and viability of these five isolates were all raised. After the post-biodegradation process, the weight loss percentages of the mentioned bacterial strains treated with PP MPs gradually decreased, with values of 51.5 ± 0.5 %, 47.5 ± 0.5 %, 33 ± 1 %, 28.5 ± 0.5 and 35.5 ± 0.5 %, respectively. UV-Vis DRS and SEM analysis confirmed that bacterial strains adhering to MPs cause cracks and cavities on their surface. The degradation of PP MPs can be inferred from alterations in the FT-IR spectrum, specifically in the carbonyl group range of 1100-1700 cm-1, as well as changes in the 1H NMR spectrum, including chemical shift and proton peak pattern alterations. Bacterial strains facilitated the degradation of PP MPs through the secretion of hydrolase-categorized enzymes of protease, lipase, and esterase. The findings of this study indicate that marine bacteria may possess distinctive characteristics that facilitate the degradation of plastic waste and contribute to environmental conservation.

Recent advances in microbial and enzymatic engineering for the biodegradation of micro- and nanoplastics

This review examines the escalating issue of plastic pollution, specifically highlighting the detrimental effects on the environment and human health caused by microplastics and nanoplastics. The extensive use of synthetic polymers such as polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS) has raised significant environmental concerns because of their long-lasting and non-degradable characteristics. This review delves into the role of enzymatic and microbial strategies in breaking down these polymers, showcasing recent advancements in the field. The intricacies of enzymatic degradation are thoroughly examined, including the effectiveness of enzymes such as PETase and MHETase, as well as the contribution of microbial pathways in breaking down resilient polymers into more benign substances. The paper also discusses the impact of chemical composition on plastic degradation kinetics and emphasizes the need for an approach to managing the environmental impact of synthetic polymers. The review highlights the significance of comprehending the physical characteristics and long-term impacts of micro- and nanoplastics in different ecosystems. Furthermore, it points out the environmental and health consequences of these contaminants, such as their ability to cause cancer and interfere with the endocrine system. The paper emphasizes the need for advanced analytical methods and effective strategies for enzymatic degradation, as well as continued research and development in this area. This review highlights the crucial role of enzymatic and microbial strategies in addressing plastic pollution and proposes methods to create effective and environmentally friendly solutions.

Exploring biodegradative efficiency: a systematic review on the main microplastic-degrading bacteria

Introduction

Microplastics (MPs) are widely distributed in the environment, causing damage to biota and human health. Due to their physicochemical characteristics, they become resistant particles to environmental degradation, leading to their accumulation in large quantities in the terrestrial ecosystem. Thus, there is an urgent need for measures to mitigate such pollution, with biological degradation being a viable alternative, where bacteria play a crucial role, demonstrating high efficiency in degrading various types of MPs. Therefore, the study aimed to identify bacteria with the potential for MP biodegradation and the enzymes produced during the process.

Methods

The methodology used followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) protocol.

Results and Discussion

The research yielded 68 eligible studies, highlighting bacteria from the genera Bacillus, Pseudomonas, Stenotrophomonas, and Rhodococcus as the main organisms involved in MP biodegradation. Additionally, enzymes such as hydrolases and alkane hydroxylases were emphasized for their involvement in this process. Thus, the potential of bacterial biodegradation is emphasized as a promising pathway to mitigate the environmental impact of MPs, highlighting the relevance of identifying bacteria with biotechnological potential for large-scale applications in reducing MP pollution.

Biofragmentation of Polystyrene Microplastics: A Silent Process Performed by Chironomus sancticaroli Larvae

Polystyrene (PS) is one of the main synthetic polymers produced around the world, and it is present in the composition of a wide variety of single-use objects. When released into the environment, these materials are degraded by environmental factors, resulting in microplastics. We investigated the ability of Chironomus sancticaroli (Diptera, Chironomidae) to promote the fragmentation of PS microspheres (24.5 ± 2.9 μm) and the toxic effects associated with exposure to this polymer. C. sancticaroli larvae were exposed to 3 different concentrations of PS (67.5, 135, and 270 particles g-1 of dry sediment) for 144 h. Significant lethality was observed only at the highest concentration. A significant reduction in PS particle size as well as evidence of deterioration on the surface of the spheres, such as grooves and cracks, was observed. In addition, changes in oxidative stress biomarkers (SOD, CAT, MDA, and GST) were also observed. This is the first study to report the ability of Chironomus sp. to promote the biofragmentation of microplastics. The information obtained demonstrates that the macroinvertebrate community can play a key role in the degradation of plastic particles present in the sediment of freshwater environments and can also be threatened by such particle pollution.

Sustainable degradation of synthetic plastics: A solution to rising environmental concerns

Plastics have a significant role in various sectors of the global economy since they are widely utilized in agriculture, architecture, and construction, as well as health and consumer goods. They play a crucial role in several industries as they are utilized in the production of diverse things such as defense materials, sanitary wares, tiles, plastic bottles, artificial leather, and various other household goods. Plastics are utilized in the packaging of food items, medications, detergents, and cosmetics. The overconsumption of plastics presents a significant peril to both the ecosystem and human existence on Earth. The accumulation of plastics on land and in the sea has sparked interest in finding ways to breakdown these polymers. It is necessary to employ suitable biodegradable techniques to decrease the accumulation of plastics in the environment. To address the environmental issues related to plastics, it is crucial to have a comprehensive understanding of the interaction between microorganisms and polymers. A wide range of creatures, particularly microbes, have developed techniques to survive and break down plastics. This review specifically examines the categorization of plastics based on their thermal and biodegradable properties, as well as the many types of degradation and biodegradation. It also discusses the various types of degradable plastics, the characterization of biodegradation, and the factors that influence the process of biodegradation. The plastic breakdown and bioremediation capabilities of these microbes make them ideal for green chemistry applications aimed at removing hazardous polymers from the ecosystem.

Microplastic (MP) occurrence in pelagic and demersal fishes of Gujarat, northwest coast of India

Microplastics (MPs) are globally observed in marine as well as freshwater habitats, and laboratory studies have shown that marine organisms can accidentally ingest them. Monitoring the MP ingestion by fish in the environment is very crucial for understanding the risk of consuming MP-contaminated fish for human health. In this study, we investigated MP ingestion in 400 fish individuals from the Veraval Coast, in the state of Gujarat, India. There was 100% MP occurrence in the inedible tissues of fish, and 68% of the analyzed fishes presented MPs in edible tissues. The most dominant MPs based on their size in fishes were 0.05-0.1 mm. One hundred percent presence of only fibres in edible tissue was observed, while in inedible tissue, it was 77%, 20.42% and 2.58% of fibre, fragment and film respectively. The most common MP colour was blue. The predominant polymers were low-density polyethylene (LDPE) followed by polypropylene, high-density polyethylene (HDPE) and polystyrene. This is the first study performed on MPs in marine fishes from this region. Our findings suggest that the abundance of MPs observed in this area is higher than in other states of the country.

Biodegradation of polyethylene in digestive gland homogenates of marine invertebrates

Вiotic factors may be the driving force of plastic fragmentation along with abiotic factors. Since understanding the processes of biodegradation and biological depolymerization of plastic is important, a new methodological approach was proposed in this study to investigate the role of marine invertebrate digestive enzymes in plastic biodegradation. The aim of this study is to evaluate the possibility of enzymatic biodegradation of polyethylene fragments in the digestive gland homogenate of marine invertebrates differing in their feeding type (Strongylocentrotus nudus, Patiria pectinifera, Mizuhopecten yessoensis). Significant changes are found in the functional groups of the polymer after 3 days of incubation in the digestive gland homogenates of the studied marine invertebrates. A significant increase in the calculated CI (carbonyl index) and COI (сarbon-oxygen index) indices compared to the control sample was observed. The results suggest that digestive enzymes of studied organisms may play an important role in the biogeochemical cycling of plastic.

Optimization of microplastic removal based on the complementarity of constructed wetland and microalgal-based system

As one of the emblematic emerging contaminants, microplastics (MPs) have aroused great public concern. Nevertheless, the global community still insufficiently acknowledges the ecological health risks and resolution strategies of MP pollution. As the nature-based biotechnologies, the constructed wetland (CW) and microalgal-based system (MBS) have been applied in exploring the removal of MPs recently. This review separately presents the removal research (mechanism, interactions, implications, and technical defects) of MPs by a single method of CWs or MBS. But one thing with certitude is that the exclusive usage of these techniques to combat MPs has non-negligible and formidable challenges. The negative impacts of MP accumulation on CWs involve toxicity to macrophytes, substrates blocking, and nitrogen-removing performance inhibition. While MPs restrict MBS practical application by making troubles for separation difficulties of microalgal-based aggregations from effluent. Hence the combined strategy of microalgal-assisted CWs is proposed based on the complementarity of biotechnologies, in an attempt to expand the removing size range of MPs, create more biodegradable conditions and improve the effluent quality. Our work evaluates and forecasts the potential of integrating combination for strengthening micro-polluted wastewater treatment, completing the synergistic removal of MP-based co-pollutants and achieving long-term stability and sustainability, which is expected to provide new insights into MP pollution regulation and control.

An Emerging Role of Micro- and Nanoplastics in Vascular Diseases

Vascular diseases are the leading causes of death worldwide, and they are attributable to multiple pathologies, such as atherosclerosis, diabetes, and chronic obstructive pulmonary disease. Exposure to various environmental contaminants is associated with the development of various diseases, including vascular diseases. Among environmental contaminants, micro- and nanoplastics have gained attention as global environmental risk factors that threaten human health. Recently, extensive research has been conducted on the effects of micro- and nanoplastics on various human diseases, including vascular diseases. In this review, we highlight the effects of micro- and nanoplastics on vascular diseases.

Comprehensive understanding of the aging and biodegradation of polystyrene-based plastics

The extensive utilization and inadequate handling of plastics have resulted in severe environmental ramifications. In particular, plastics composed solely of a carbon-carbon (C-C) backbone exhibit limited degradation due to the absence of hydrolyzable functional groups. Plastics with enduring longevity in the natural environment are susceptible to environmental factors and their intrinsic properties, subsequently undergoing a series of aging processes that culminate in biodegradation. This article focuses on polystyrene (PS), which constitutes 20% of total plastic waste, as a case study. Initially, the application of PS in life and the impacts it poses are introduced. Following that, the key factors influencing the aging of PS are discussed, primarily encompassing its properties (e.g., surface characteristics, additives) and environmental factors (e.g., water matrices, biofilms). Lastly, an overview of microbial degradation of PS is provided, including potential microorganisms involved in PS degradation (bacteria, fungi, algae, and insects), four processes of microbial degradation (colonization, bio-fragmentation, assimilation, and mineralization), and potential mechanisms of microbial degradation. This study provides a comprehensive understanding of the multifaceted influences affecting the aging and biodegradation mechanisms of PS, thereby contributing valuable insights for the future management of plastic pollution.