Review of adsorption-membrane hybrid systems for water and wastewater treatment

Immobilization of silver nanoparticles and silver iodide within bamboo fabrics for wastewater treatment

Pathogenic microorganisms and dyes are the main sources of water pollution. These pollutants are extremely hazardous and may harm aquatic life and human health. As a result, removing these pollutants is critical in assessing contamination risks and mitigating potential health hazards. To effectively remove pathogenic microorganisms and dyes from wastewater, an efficient multi-functional material was designed based on AgI, Ag NPs, and Ag NPs@AgI immobilized on bamboo fabrics as a support substrate. The water disinfection aptitude of the modified bamboo fabrics was evaluated against different microorganisms. The results showed that the Ag NPs@AgI@bamboo showed excellent antibacterial activity against S. aureus (88%) and E. coli (90%) as well as perfect antifungal activity against C. albicans (82%). Methylene blue (MB) was used as a pollutant model to test the catalytic and photocatalytic activity of modified bamboo fabrics. The results show that Ag NPs@AgI@bamboo was highly efficient in removing the MB dye via reduction (90%) after 60 min or photodegradation (93%) after 6 h of UV light irradiation. The pseudo-first-order kinetic study shows that Ag NPs@AgI@bamboo possessed outstanding catalytic reduction and photocatalytic degradation activities toward MB.

Advanced nanofibers for water treatment: Unveiling the potential of electrospun polyacrylonitrile membranes

The challenges pertaining to the potable water scarcity and pollution motivates us to envision innovative strategies. Industrial wastewater containing hazardous heavy metals, synthetic dyes, and oil exacerbates the pursuit of clean drinking water. Among the array of available technologies, electrospun nanofiber membranes have garnered attention due to their efficiency, high surface-to-volume ratio, cost-effectiveness, scalability, and multifunctionality. These membranes possess distinct physical and chemical attributes that position them as ideal solutions to water purification challenges. Their versatility enables effective contaminant removal through filtration, adsorption, and chemical interactions. Polyacrylonitrile (PAN) emerges as a frontrunner among electrospun polymers due to its affordability, remarkable physical and chemical characteristics, and the ease of production. Research efforts have been dedicated to the study of electrospun PAN membranes, exploring modifications in terms of the functionalization of PAN molecular chain, incorporation of appropriate nanoparticles, and composition with other functional polymers. Parameters such as functional groups, hydrophilicity, mechanical properties, porosity, pore structure, reusability, sustainability, zeta potential, and operational conditions significantly influence the performance of electrospun PAN membranes in treating the contaminated water. Despite progress, challenges surrounding fouling, toxicity, scalability, selectivity, and production costs ought to be addressed strategically to enhance their practicality and real-world viability. This review comprehensively scrutinizes the current landscape of available electrospun PAN membranes in water treatment encompassing diverse range of synthesized entities and experimental outcomes. Additionally, the review delves into various approaches undertaken to optimize the performance of electrospun PAN membranes while proposing potential strategies to overcome the existing hindrances. By carefully analyzing the parameters that impact the performance of these membranes, this overview offers invaluable guidelines for researchers and engineers, thus empowering them to design tailored electrospun nanofiber membranes for specific water purification applications. As the innovative research continues and strategic efforts address the current challenges, these membranes can play a pivotal role in enhancing water quality, mitigating water scarcity, and contributing to environmental sustainability. The widespread application of electrospun nanofiber membranes in water treatment has the potential to create a lasting positive impact on global water resources and the environment. A dedicated effort towards their implementation will undoubtedly mark a crucial step towards a more sustainable and water-secure future.

Electrospun adsorbent membrane of PLA containing chitosan for toxic metal ions removal from aqueous solution: Effect of chitosan incorporation

The scarcity of water resources and their pollution are vital to modern civilization. Thus, adsorptive membranes are promising candidates to be applied in the filtration systems to improve the water quality. In summary, this study investigated the effect of chitosan (CS) in the morphological, chemical, and physical aspects of PLA-based membranes incorporating chitosan obtained by electrospinning process, their adsorption behavior in multielement aqueous systems containing Cr6+, Cu2+, Zn2+, Mn 2+, Ni2+, and Cd2+ in pH 4, and the possible removal mechanism on the composite electrospun membrane's surface. The addition of chitosan within the PLA matrix reduced the diameters and porosity of the fibers and pores, resulting in an improvement in the modulus of elasticity and tensile strength until rupture, reaching values around 346.4 ± 61.4 MPa and 4.57 ± 0.69 MPa for mechanical tests carried out in the alignment of fibers with the highest percentage of CS. Besides, the contact angle varied between 70 ± 5° and 114 ± 3°, depending on side of membrane's surface (smoother or rougher). For removal efficiency of six metal ions in multielement aqueous systems, the best results were verified for Cr6+ (40 up to 100 %). The adsorption efficiency did not significantly change when the chitosan content increased, but the value increased for Cr6+ percentage drastically. From SEM-EDS and XPS, indicatives of possible adsorption mechanism showed the contribution of amino groups and oxygen-rich functional groups of chitosan (especially oxyanion chromium); the PLA chain ends (active -COO- sites) for divalent metal ions removal, and the lowest ionic radius of chromium, that facilitate its removal. Thus, PLA membranes containing chitosan are a promising candidate with excellent mechanical and adsorptive properties for environmental remediation.

Amyloid Fibrils and Their Applications: Current Status and Latest Developments

Amyloid fibrils are one of the important forms of protein aggregates, first discovered in the pathological brain tissues of patients with various neurodegenerative diseases. They are considered the core pathological markers of different neurodegenerative diseases. In recent years, research has found that multiple proteins or peptides dynamically assemble to form functional amyloid-like nanofibrils under physiological conditions, exhibiting excellent mechanical properties, high environmental stability, and self-healing ability. Therefore, they have become a class of functional biological nanomaterials with important development potential. This article systematically reviews the latest progress in the preparation, functionalization, and application of amyloid-like nanofibrils in engineering and provides an outlook on possible future development directions.

From pollutant to purifier: Leveraging plastic waste-derived activated carbon for sustainable water remediation solutions

The ubiquitous presence of plastic waste presents a significant environmental challenge, characterized by its persistence and detrimental impacts on ecosystems. The valorization of plastic waste through conversion into high-value carbon materials offers a promising circular economy approach. This review critically examines the potential of plastic waste-derived activated carbon (PAC) as a sustainable and effective adsorbent for water remediation. The manuscript commences with a concise overview of the multifaceted nature of plastic pollution, highlighting its classification, environmental implications, and the limitations of existing waste management frameworks. Subsequently, it delves into the intricacies of PAC production, critically analyzing various preparation methods and their associated challenges. A comprehensive exploration of modification strategies, including chemical activation and surface functionalization, is undertaken to elucidate their role in enhancing PAC's adsorption selectivity and capacity for diverse pollutants. The effectiveness of PAC in removing a diverse array of pollutants, including emerging contaminants and recalcitrant organic compounds, is thoroughly examined. While acknowledging the influence of key factors such as pollutant characteristics and solution chemistry on adsorption efficiency, the review also identifies critical challenges, including the high production costs associated with PAC synthesis, variability of plastic waste composition, the potential for leaching of residual monomers, and the complexities of multi-pollutant adsorption. Future research directions are outlined, emphasizing the need for advanced characterization techniques, computational modeling to optimize adsorbent design, and rigorous life cycle assessments to evaluate the environmental sustainability of PAC production. By addressing these challenges, PAC offers a promising pathway towards a circular economy, mitigating plastic pollution while providing a sustainable and effective solution for water remediation.

High-performance cellulose acetate fibers-loaded Alca layered double oxide adsorbents towards efficient elimination of anionic pollutants: Mechanism adsorption and RSM-CCD approach

In the present research, we investigate Congo red (CR) removal by layered double hydroxide and oxide AlCa on cellulose acetate (CA) fiber as anion-adsorbents in aqueous solution. The as-prepared composite was characterized by FE-SEM, XRD, FTIR, EDS-mapping and BET-BJH analyses. The CR adsorption ability on AlCa LDH/CA and AlCa LDO/CA adsorbents was evaluated. The removal property, dye adsorption and filtration properties of the AlCa LDO/CA composite were studied for removal CR based on central composite design (CCD) technique through investigating operational variables (temperature, adsorbent dosage, pH and contact time). The fabricated AlCa LDO/CA composite indicates a high removal efficiency up to 98.7 % for the CR removal in the 16 min. The data of the adsorption equilibrium were described by the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms, and exhibited that AlCa LDH/CA fibers and AlCa LDO/CA fibers followed a pseudo-second-order kinetic model and Langmuir isotherm. The stability of Al-Ca-LDO/CA fibers nanocomposite was indicated that it was >95 % after eight cycles for removal of CR in the batch method on stirrer. The findings illustrated that appropriate AlCa LDO/CA fiber could be an efficient technique for CR elimination.

Sulfur-functionalized sawdust biochar for enhanced cadmium adsorption and environmental remediation: A multidisciplinary approach and density functional theory insights

Pristine biochar typically exhibits limited capacity for heavy metal adsorption due to its inadequate pore development and insufficient surface functionality. This study introduces an innovative chemical strategy to enhance the surface of sawdust biochar with sulfur-based functional groups (C=S, C-S, S-S, S2-, S-H, -SO32-, -SO42-) to significantly improve cadmium (Cd) adsorption. Sulfur-doping using H2SO4, Na2S, and Na2S2O3 markedly increased the sulfur content from 0.11% (pristine) to 2.81% (H2SO4), 0.57% (Na2S), and 13.27% (Na2S2O3). Characterization techniques such as SEM-EDS, FTIR, and XPS confirmed the successful incorporation of sulfur moieties and additional oxygen-containing groups, improving surface functionality. The Cd adsorption capacity of S-modified biochar increased by 4.8-9.0 times compared to pristine biochar, with peak values of 39.38, 20.84, and 34.14 mg g-1 for H2SO4, Na2S, and Na2S2O3-modified biochar, respectively. The equilibrium time was significantly reduced from 4 h (pristine) to 5-10 min (S-modified). The enhanced Cd adsorption was attributed to the synergistic interplay of electrostatic attraction, cadmium-π electron interactions, complexation, and ion exchange mechanisms, facilitated by the presence of oxygen and sulfur functional groups. Density Functional Theory (DFT) calculations showed that sulfur doping modulated the electronic properties of the biochar-Cd systems, narrowing the band gap and enhancing the Cd-O bonds, thereby improving the Cd adsorption performance. Additionally, the binding energies of the S-modified biochar-Cd complex were found to be more stable compared to those before Cd adsorption. This study demonstrates that both oxygen and sulfur-functionalized sawdust biochar is an effective and eco-friendly adsorbent for Cd removal, highlighting the significance of tailored surface modifications to augment biochar's reactivity and affinity towards specific contaminants. The developed material offers a sustainable and scalable solution for Cd removal from aqueous environments, contributing to advanced water treatment technologies and environmental remediation strategies.

Sodium alginate modified metal oxide nanoparticles as a desirable nanofiller for polyethersulfone membranes: Application in diclofenac removal from water

Biopolymers offer significant advantages in water treatment applications. This study investigates polyethersulfone (PES) membranes enhanced with TiO₂ and Fe₃O₄ nanoparticles modified by sodium alginate (NaAlg), abbreviated as NaAlg@TiO₂ and NaAlg@Fe₃O₄, for the removal of diclofenac sodium salt (DCF) from water. The NaAlg biopolymer modification was achieved by wrapping the metal oxide nanoparticles. The mixed matrix membranes containing modified nanofillers were prepared via phase inversion method. Results showed that adding 0.1 wt% NaAlg-modified nanoparticles increased membrane water uptake from 44 % to 90 % and 80 %, respectively. The pure water flux was improved due to enhanced hydrophilicity and porosity, and the modified membranes exhibited better fouling resistance against oily water. The DCF removal efficiency improved from 45 % to 96 % and 94 % for the NaAlg@TiO₂ and NaAlg@Fe₃O₄ nanocomposite membranes, respectively. The negative charge of NaAlg contributed to higher DCF rejection at pH 6-7. These findings demonstrate that modifying metal oxide nanoparticles with NaAlg enhances the performance of PES membranes, improving their effectiveness in water treatment.

Bioaerogels from biomass waste: An alternative sustainable approach for wastewater treatment

The generation of municipal solid waste is projected to increase from 2.1 billion tonnes in 2023 to 3.8 billion tonnes by 2050. In 2020, the direct global cost of managing this waste was approximately USD 252 billion. When considering additional hidden costs-such as those arising from pollution, adverse health effects, and climate change due to inadequate waste disposal-the total cost escalates to USD 361 billion. Without significant improvements in waste management practices, this figure could nearly double by 2050, reaching an estimated USD 640.3 billion annually. Among municipal solid waste, biowaste accounts for roughly 44 % of the global municipal solid waste, translating to about 840 million tonnes annually. They are widely accessible and economical, offering a cost-effective alternative to traditional treatment materials. Transforming biomass waste into carbon-based materials (e.g., bioaerogels) is a sustainable practice that reduces waste and repurposes it for environmental remediation. This approach not only decreases the volume of waste directed to landfills and mitigates harmful greenhouse gas emissions from decomposition but also aligns with the principles of a circular economy. Furthermore, it supports sustainable development goals by addressing issues such as water scarcity and pollution while promoting waste valorization and resource efficiency. The unique properties of bioaerogels-including their porosity, multi-layered structure, and chemical adaptability-make them highly effective for the remediation of different water pollutants from aquatic bodies. This review article comprehensively delves into multifaceted wastewater remediation strategies -based bioaerogels such as coagulation and flocculation, advanced oxidation processes, membrane filtration, catalytic processes, water disinfection, Oil-water separation, biodegradation, and adsorption. Additionally, it examines different mechanisms of interaction such as surface adsorption, electrostatic interaction, van der Waals forces, ion exchange, surface precipitation, complexation, pore-filling, hydrophobic interactions, and π-π stacking. Moreover, it conducts an integrated techno-economic evaluation to assess their feasibility in wastewater treatment. By valorizing biomass waste, a closed-loop system can be established, where waste is transformed into valuable bioaerogels. This approach not only addresses challenges related to effluent pollution but also generates economic, environmental, and social benefits. Ultimately, the review underscores the transformative potential of bioaerogels in wastewater treatment, emphasizing their crucial role in supporting long-term environmental goals and advancing the principles of resource circularity.

Synergistic Effect of UiO-66 Directly Grown on Kombucha-Derived Bacterial Cellulose for Dye Removal

Metal-Organic Frameworks (MOFs) are particularly attractive sorbents with great potential for the removal of toxic dye pollutants from industrial wastewaters. The uniform dispersion of MOF particles on suitable substrates then represents a key condition to improve their processability and provide good accessibility to the active sites. In this work, we investigate the efficiency of a natural bacterial cellulose material derived from Kombucha (KBC) as an active functional support for growing and anchoring MOF particles with UiO-66 structures. An original hierarchical microstructure was obtained for the as-developed Kombucha cellulose/UiO-66 (KBC-UiO) composite material, with small MOF crystals (~100 nm) covering the cellulose fibers. Promising adsorption properties were demonstrated for anionic organic dyes such as fluorescein or bromophenol blue in water at pH 5 and pH 7 (more than 90% and 50% removal efficiency, respectively, after 10 min in static conditions). This performance was attributed to both the high accessibility and uniform dispersion of the MOF nanocrystals on the KBC fibers together with the synergistic effects involving the attractive adsorbing properties of UiO-66 and the surface chemistry of KBC. The results of this study provide a simple and generic approach for the design of bio-sourced adsorbents and filters for pollutants abatement and wastewater treatment.

Advanced technologies in water treatment: Chitosan and its modifications as effective agents in the adsorption of contaminants

Chitosan, derived from the abundant biopolymer chitin, has emerged as a promising option for water treatment due to its intrinsic bioavailability. This review emphasizes the notable characteristics of chitosan, which allow for various modifications, expanding its applications. The polymer's effectiveness in adsorbing contaminants, particularly in advanced water treatment technologies, is highlighted. The review underscores the potential of chitosan-based hybrid materials, including nanocomposites, hydrogels, membranes, films, sponges, nanoparticles, microspheres, and flakes, as innovative alternatives to traditional chemical-based adsorbents. The advantages of using these materials in wastewater treatment, especially in removing heavy metals, dyes, and emerging compounds, are explored. The study delves into the mechanisms involved in wastewater treatment with chitosan, emphasizing the interactions between the polymer and various contaminants. Additionally, the application of chitosan as a contaminant removal agent in a post-pandemic context is addressed, considering the challenges related to waste management and environmental preservation. The analysis highlights the potential contribution of chitosan in mitigating environmental impacts post-pandemic, offering practical solutions for treating contaminated effluents and promoting sustainability. The study addresses current obstacles and prospects for chitosan-based wastewater treatment, emphasizing its promising role in sustainable water management.

Recent advances in designing and developing efficient sillenite-based materials for photocatalytic applications

Sillenite materials have been the subject of intense investigation for recent years due to their unique characteristics. They possess a distinct structure with space group I23, allowing them to exhibit distinctive features, such as an electronic structure ideal for certain applications such as photocatalysis. The present research delves into the structure, synthesis, and properties of sillenites, highlighting their suitability for photocatalysis. It explores also advanced engineering strategies for designing sillenite-based photocatalysts, including heterojunction formation, morphology modification, doping, and hybrid processes. Each strategy offers advantages and limitations that are critically discussed. The review then lists and discusses the photocatalytic performance of various sillenite-based systems recently developed for common applications, such as removing hazardous organic and inorganic contaminants, and even infrequent applications, such as microbial inactivation, H2 generation, CO2 reduction and N2 fixation. Finally, valuable insights and suggestions are put forward for future research directions in the field of sillenite-based photocatalysis. This comprehensive overview would provide a valuable resource for the development of efficient photocatalytic systems to address environmental and energy challenges.

A two-in-one thiosemicarbazide and whole pine needle-based adsorbent for rapid and efficient adsorption of methylene blue dye and mercuric ions

Herein, we report the synthesis of an oxidized pine needle-thiosemicarbazone Schiff base (OPN-TSC) from whole pine needles (WPN) as a dual-purpose adsorbent to remove a cationic dye, methylene blue (MB), and Hg2+ ions in separate processes. The adsorbent was synthesized by periodate oxidation of WPN followed by a reaction with thiosemicarbazide. The syntheses of OPN and OPN-TSC were confirmed by FTIR, XRD, FESEM, EDS, BET, and surface charge analysis. The emergence of new peaks at 1729 cm-1 (-CHO stretching) and 1639 cm-1 (-COO- stretching) in the FTIR spectrum of OPN confirmed the oxidation of WPN to OPN. FTIR spectrum of OPN-TSC has a peak at 1604 cm-1 (C = N stretching), confirming the functionalization of OPN to OPN-TSC. XRD studies revealed an increase in the crystallinity of OPN and a decrease in the crystallinity of OPN-TSC because of the attachment of thiosemicarbazide to OPN. The values of %removal for MB and Hg2+ ions by OPN-TSC were found to be 87.36% and 98.2% with maximum adsorption capacity of 279.3 mg/g and 196 mg/g for MB and Hg2+ ions, respectively. The adsorption of MB followed pseudo-second-order kinetics with correlation coefficient (R2 of 0.99383) and Freundlich isotherm (R2 = 0.97239), whereas Hg2+ ion removal demonstrated the Elovich (R2 = 0.97076) and Langmuir isotherm (R2 = 0.95110). OPN-TSC is regenerable with significant recyclability up to 10 cycles for both the adsorbates. The studies established OPN-TSC as a low-cost, sustainable, biodegradable, environmentally benign, and promising adsorbent for the removal of hazardous cationic dyes and toxic metal ions from wastewater and industrial effluents, especially the textile effluents.

Role of Alkyl Chain Length in Surfactant-Induced Precipitation of Reactive Brilliant Blue KN-R

To develop a cost-effective method for the effective removal of reactive brilliant blue KN-R (RBB KN-R) from wastewater, we investigated the interactions between RBB KN-R and three cationic surfactants with different alkyl chain lengths, namely dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), and cetyltrimethylammonium bromide (CTAB). Employing a conductivity analysis, surface tension analysis, ultraviolet-visible spectrophotometry, and molecular dynamics simulation, we ascertained that RBB KN-R formed a 1:1 molar ratio dye-surfactant complex with each surfactant through electrostatic attraction. Notably, an augmentation in alkyl chain length correlated with increased binding strength between RBB KN-R and the surfactant. The resulting dye-surfactant complex exhibited heightened surface activity, enabling interactions through hydrophobic forces to generate dye-surfactant aggregates when the molar ratio was below 1:1. Within these mixed aggregates, self-assembly of RBB KN-R molecules occurred, leading to the formation of dye aggregates. Due to the improved hydrophobicity with increased alkyl chain length, TTAB and CTAB could encapsulate dye aggregates within the mixed aggregates, but DTAB could not. The RBB KN-R aggregates tended to distribute on the surface of the RBB KN-R-DTAB mixed aggregates, resulting in low stability. Thus, at a DTAB concentration lower than CMC, insoluble particles readily formed and separated from surfactant aggregates at an RBB KN-R and DTAB molar ratio of 1:4. Analyzing the RBB KN-R precipitate through scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) and measuring the DTAB concentration in the supernate revealed that, at this molar ratio, all RBB KN-R precipitated from the dye-surfactant mixed solution, with only 7.5 ± 0.5% of DTAB present in the precipitate. Furthermore, the removal ratio of RBB KN-R reached nearly 100% within a pH range of 1.0 to 9.0 and standing time of 6 h. The salt type and concentration did not significantly affect the precipitation process. Therefore, this simultaneous achievement of successful RBB KN-R removal and effective separation from DTAB underscores the efficacy of the proposed approach.

Recent technologies for glyphosate removal from aqueous environment: A critical review

The growing demand for food has led to an increase in the use of herbicides and pesticides over the years. One of the most widely used herbicides is glyphosate (GLY). It has been used extensively since 1974 for weed control and is currently classified by the World Health Organization (WHO) as a Group 2A substance, probably carcinogenic to humans. The industry and academia have some disagreements regarding GLY toxicity in humans and its effects on the environment. Even though this herbicide is not mentioned in the WHO water guidelines, some countries have decided to set maximum acceptable concentrations in tap water, while others have decided to ban its use in crop production completely. Researchers around the world have employed different technologies to remove or degrade GLY, mostly at the laboratory scale. Water treatment plants combine different technologies to remove it alongside other water pollutants, in some cases achieving acceptable removal efficiencies. Certainly, there are many challenges in upscaling purification technologies due to the costs and lack of factual information about their adverse effects. This review presents different technologies that have been used to remove GLY from water since 2012 to date, its detection and removal methods, challenges, and future perspectives.

Spinel ferrite nanoparticles as potential materials in chlorophenol removal from wastewater

Persistent organic pollutants (POPs) including chlorophenols (CPs) are increasing in water effluents, creating serious problems for both aquatic and terrestrial lives. Several research attempts have considered the removal of CPs by functionalised nanomaterials as adsorbents and catalysts. Besides the unique crystal structure, spinel ferrite nanomaterials (SFNs) own interesting optical and magnetic properties that give them the potential to be utilised in the removal of different types of CPs. In this review, we highlighted the recent research work that focused on the application of SFNs in the removal of different CP substances based on the number of chlorine atom attached to the phenolic compound. We have also discussed the structure and properties of SFN along with their numerous characterisation tools. We demonstrated the importance of identifying the structure, surface area, porosity, optical properties, etc. in the efficiency of the SFN during the CP removal process. The reviewed research efforts applied photocatalysis, wet peroxide oxidation (WPO), persulfate activated oxidation and adsorption. The studies presented different paths of enhancing the SFN ability to remove the CPs including doping (ion substitution), oxide composite structure and polymer composite structure. Experimental parameters such as temperature, dosage of CPs and SFN structure have shown to have a major effect in the CP removal efficiency. More attention is needed to investigate the different properties of SFN that can be tailored through different techniques and expected to have major role in the removal mechanism of CPs.

Effectiveness of different CuO morphologies nanomaterials on the permeability, antifouling, and mechanical properties of PVDF/PVP/CuO ultrafiltration membrane for water treatment

The hydrophobic nature of Poly (vinylidene fluoride) (PVDF) is a significant barrier to use in ultrafiltration, resulting in fouling, flux decline, and reduced lifespan in water treatment. This study examines the effectiveness of different morphologies of CuO nanomaterials (NMs) (spherical, rod, plate, and flower), synthesized by the facile hydrothermal method, to modify PVDF membrane with PVP additive for improving the performance of water permeability and antifouling. Such membrane configurations with different morphologies of CuO NMs improved hydrophilicity with a maximum water flux of 222-263 L m-2h-1 compared to 195 L m-2h-1 for the bare membrane and exhibited excellent thermal and mechanical strengths. The characterization results exhibited that plate-like CuO NMs were dispersed uniformly in the membrane matrix, and their incorporation as a composite improved the membrane properties. From the antifouling test with the bovine serum albumin (BSA) solution, the membrane with plate-like CuO NMs had the highest flux recovery ratio (FRR) (∼91%) and the lowest irreversible fouling ratio (∼10%). The antifouling enhancement was due to less interaction between modified membranes and foulant. Further, the nanocomposite membrane showed excellent stability and negligible Cu2+ ion leaching. Overall, our findings provide a new strategy for developing inorganic nanocomposite PVDF membranes for water treatment.

Efficient dye removal from industrial wastewater using sustainable activated carbon and its polyamide nanocomposite derived from agricultural and industrial wastes in column systems

Sugar beet crown (SBC) waste was employed to produce sustainable activated carbon (AC) by a thermo-chemical activation procedure using a fixed ratio of H3PO4/SBC (1 : 1 w/w ratio) at 550 °C/2 h. An activated carbon/polyamide nano-composite (AC/PA) was also prepared through the polymerization of the fabricated AC (90%) with polyamide (PA, 10%) synthetic textile waste using a proper dissolving agent at a specified w/w ratio with the employed polymer (formic acid/PA = 82/18%). Both AC and its derivative AC/PA were employed in the remediation of dyes from industrial wastewater in column systems, and their efficiencies were compared at various applied experimental conditions. The adsorption of the industrial dye waste (IDW) was a pH-, flow rate-, and bed thickness-controlled process by the regarded adsorbents. Kinetic studies confirmed the suitability of the Thomas equation over the Yoon and Nelson model in predicting the dynamic adsorption process of IDW by AC and AC/PA as was assured by the close agreement among the calculated and experimental uptake capacities of both adsorbents at the same applied flow rates, suggesting the chemisorption nature of IDW adsorption. Additionally, electrostatic attraction was the leading mechanism of IDW adsorption by AC and AC/PA composite with some advantages of the former over the latter.

Surface Treatment of Polymer Membranes for Effective Biofouling Control

Membrane biofouling is the consequence of the deposition of microorganisms on polymer membrane surfaces. Polymeric membranes have garnered more attention for filtering and purifying water because of their ease of handling, low cost, effortless surface modification, and mechanical, chemical, and thermal properties. The sizes of the pores in the membranes enable micro- and nanofiltration, ultrafiltration, and reverse osmosis. Commonly used polymers for water filter membranes are polyvinyl chloride (PVA), polyvinylidene fluoride (PVDF), polyamide (PA), polyethylene glycol (PEG), polyethersulfone (PES), polyimide (PI), polyacrylonitrile (PAN), polyvinyl alcohol (PA), poly (methacrylic acid) (PMAA), polyaniline nanoparticles (PANI), poly (arylene ether ketone) (PAEK), polyvinylidene fluoride polysulfone (PSF), poly (ether imide) (PEI), etc. However, these polymer membranes are often susceptible to biofouling because of inorganic, organic, and microbial fouling, which deteriorates the membranes and minimizes their lives, and increases operating costs. Biofouling infection on polymer membranes is responsible for many chronic diseases in humans. This contamination cannot be eliminated by periodic pre- or post-treatment processes using biocides and other chemicals. For this reason, it is imperative to modify polymer membranes by surface treatments to enhance their efficiency and longevity. The main objective of this manuscript is to discuss application-oriented approaches to control biofouling on polymer membranes using various surface treatment methods, including nanomaterials and fouling characterizations utilizing advanced microscopy and spectroscopy techniques.

Advanced (bio)fouling resistant surface modification of PTFE hollow-fiber membranes for water treatment

Membrane surface treatment to modify anti-(bio)fouling resistivity plays a key role in membrane technology. This paper reports on the successful use of air-stimulated surface polymerization of dopamine hydrochloride incorporated ZnO nanoparticles (ZnO NPs) for impeding the intrinsic hydrophobicity and low anti-(bio)fouling resistivity of polytetrafluoroethylene (PTFE) hollow-fiber membranes (HFMs). The study involved the use of pristine and polydopamine (Pdopa) coated PTFE HFMs, both with and without the presence of an air supply and added ZnO NPs. Zeta potential measurements were performed to evaluate the dispersion stability of ZnO NPs prior to immobilization, while morphological characterization and time-dependency of the Pdopa growth layer were illustrated through scanning electron microscopy. Pdopa surface polymerization and ZnO NPs immobilization were confirmed using FT-IR and EDX spectroscopy. Transformation of the PTFE HFM surface features to superhydrophilic was demonstrated through water contact angle analysis and the stability of immobilized ZnO NPs assessed by ICP analysis. Anti-fouling criteria and (bio)fouling resistivity performance of the surface-modified membranes were assessed through flux recovery determination of bovine serum albumin in dead-end filtration as well as dynamic-contact-condition microbial evaluation against Staphylococcus spp. and Escherichia coli, respectively. The filtration recovery ratio and antimicrobial results suggested promising surface modification impacts on the anti-fouling properties of PTFE HFM. As such, the method represents the first successful use of air-stimulated Pdopa coating incorporating ZnO NPs to induce superhydrophilic PTFE HFM surface modification. Such a method can be extended to the other membranes associated with water treatment processes.

Efficient Removal of Heavy Metals from Aqueous Solution Using Licorice Residue-Based Hydrogel Adsorbent

The removal of heavy metals through adsorption represents a highly promising method. This study focuses on the utilization of an abundant cellulose-rich solid waste, licorice residue (LR), as a natural material for hydrogel synthesis. To this end, LR-EPI hydrogels, namely, LR-EPI-5, LR-EPI-6 and LR-EPI-8, were developed by crosslinking LR with epichlorohydrin (EPI), specifically targeting the removal of Pb, Cu, and Cr from aqueous solutions. Thorough characterizations employing Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy confirmed the successful crosslinking of LR-EPIs by EPI, resulting in the formation of porous and loosely structured hydrogels. Batch studies demonstrated the high efficacy of LR-EPI hydrogels in removing the three heavy metal ions from aqueous solutions. Notably, LR-EPI-8 exhibited the highest adsorption capacity, with maximum capacities of 591.8 mg/g, 458.3 mg/g, and 121.4 mg/g for Pb²⁺, Cr³⁺, and Cu²⁺, respectively. The adsorption processes for Pb²⁺ and Cu²⁺ were well described by pseudo-second-order kinetics and the Langmuir model. The adsorption mechanism of LR-EPI-8 onto heavy metal ions was found to involve a combination of ion-exchange and electrostatic interactions, as inferred from the results obtained through X-ray photoelectron spectroscopy and FTIR. This research establishes LR-EPI-8 as a promising adsorbent for the effective removal of heavy metal ions from aqueous solutions, offering an eco-friendly approach for heavy metal removal and providing an environmentally sustainable method for the reutilization of Chinese herb residues. It contributes to the goal of "from waste, treats waste" while also addressing the broader need for heavy metal remediation.

KMnO4-oxidized whole pine needle based adsorbent for selective and efficient removal of cationic dyes

In the present study, we report the chemical modification of the dried and fallen pine needles (PNs) via a simple protocol using KMnO4 oxidation. The oxidized PNs (OPNs) were evaluated as adsorbents using some cationic and anionic dyes. The successful synthesis of OPNs adsorbent was characterized by various techniques to ascertain its structural attributes. The adsorbent showed selectivity for the cationic dyes with 96.11% removal (Pr) for malachite green (MG) and 89.68% Pr for methylene blue (MB) in 120 min. Kinetic models namely, pseudo-first order, pseudo-second order, and Elovich were applied to have insight into adsorption. Additionally, three adsorption isotherms, i.e., Langmuir, Freundlich, and Temkin were also applied. The dye adsorption followed a pseudo-second-order kinetic model with R2 > 0.99912 for MG and R2 > 0.9998 for MB. The adsorbent followed the Langmuir model with a maximum adsorption capacity (qm) of 223.2 mg/g and 156.9 mg/g for MG and MB, respectively. Furthermore, the OPNs showed remarkable regeneration and recyclability up to nine adsorption-desorption cycles with appreciable adsorption for both the dyes. The use of OPNs as an adsorbent for the removal of dyes from wastewater, therefore, provides an ecologically benign, low-cost, and sustainable solution.

Membranes in Water Reclamation: Treatment, Reuse and Concentrate Management

In this article, an extensive examination is provided on the possible uses of membranes and hybrid processes in wastewater treatment. While membrane technologies face certain constraints, such as membrane fouling and scaling, the incomplete elimination of emerging contaminants, elevated expenses, energy usage, and brine disposal, there are approaches that can address these challenges. Methods such as pretreating the feed water, utilizing hybrid membrane systems and hybrid dual-membrane systems, and employing other innovative membrane-based treatment techniques can enhance the efficacy of membrane processes and advance sustainability.

An integrated MDC-FO membrane configuration for simultaneous desalination, wastewater treatment and energy recovery

A novel microbial desalination cell (MDC) configuration was developed by introducing a forward osmosis (FO) membrane, separating the cathode chamber from a fourth extra chamber. Wastewater is treated using a sequential anode-cathode feed. The new chamber then serves as a FO draw chamber, where a saline solution is used to recover freshwater from the adjacent cathode chamber. The diluted saline solution then goes to the MDC middle chamber for further desalination. Three identical cells were constructed and operated in cyclic-batch-flow mode at different initial wastewater and saline solution concentrations. Up to 84.8 ± 1.7% of the wastewater was recovered as freshwater. Freshwater recovery decreases at lower salt concentrations and higher wastewater COD concentrations due to the lower osmotic pressure difference. Salinity of saline water was decreased by up to 69.57 ± 3.85% at the highest initial salinity. COD removal up to 94.42 ± 4.15% was reached. COD removal rates were higher at higher COD concentrations. Polarization curves show the effect of COD on the internal resistance, where cells operated at lower COD experienced higher internal resistance. Scanning electron microscopy (SEM) images revealed the extent of fouling on the ion exchange membrane and biofilm formation on the FO membranes and the electrodes.

Fly Ash as a Potential Adsorbent for Removing Radionuclides from Aqueous Solutions in an Adsorption-Membrane Assisted Process Compared to Batch Adsorption

The paper deals with checking the possibility of using fly ash (FA) as a sorbent in the batch adsorption method of removing radionuclides from aqueous solutions. An adsorption-membrane filtration (AMF) hybrid process with a polyether sulfone ultrafiltration membrane with a pore size of 0.22 μm was also tested as an alternative to the commonly used column-mode technology. In the AMF method, metal ions are bound by the water-insoluble species prior to the membrane filtration of the purified water. Thanks to the easy separation of the metal-loaded sorbent, it is possible to improve water purification parameters using compact installations and reduce operating costs. This work evaluated the influence of such parameters on cationic radionuclide removal efficiency (EM): initial pH and composition of the solution, contact time of the phases, and the FA doses. A method for removing radionuclides, ordinarily present in an anionic form (e.g., TcO4-), from water, has also been presented. The results show, that both batch adsorption of radionuclides and adsorption-membrane filtration (AMF) using the FA as an adsorbent can be effectively used for water purification and in the form of a solid directed to long-term storage.

β-FeOOH/TiO2/cellulose nanocomposite aerogel as a novel heterogeneous photocatalyst for highly efficient photo-Fenton degradation

The photo-Fenton reaction provides an effective strategy for the removal of organic pollution in water environments. However, it remains a great challenge to develop photo-Fenton catalysts with high photocatalytic activity, low catalyst losses and excellent recyclability. In this work, a β-FeOOH/TiO₂/cellulose nanocomposite aerogel was fabricated as an efficient and convenient heterogeneous catalyst in the photo-Fenton system via in situ synthesis of TiO₂ and β-FeOOH NPs on a cellulose-based aerogel. The cellulose aerogel not only acted as a microreactor to prevent aggregation of particles, but also acted as a supporting material to improve the stability and reusable performance of the catalyst. Meanwhile, the synergy between TiO₂ and β-FeOOH endowed the cellulose-based nanocomposite aerogel with highly efficient photo-Fenton degradation of dyes. As a result, the composite β-FeOOH/TiO₂/cellulose aerogel displayed high photocatalytic performance. Its removal efficiency of MB reached 97.2% under weak UV light for 65 min. There is no obvious decrease in the catalytic efficiency after 5 cycles, suggesting the stability and recyclability of the composite aerogel. This study provides a novel strategy for the preparation of efficient green heterogeneous catalysts by using renewable resources, and shows composite catalyst processes have great potential in wastewater treatment.

Hotspots and Trends of Layered Double Hydroxide-based Adsorbents for Polluted Water Treatment: Insights from Bibliometric Analysis

The use of layered double hydroxides (LDHs) as adsorbent for water treatment has been gaining relevance in recent years. In this context, this work aimed to map, through a bibliometric study, the extent of research that deals with the theme. The scientific database used was the Web of Science, and the chronology of the search consideredthe period from 1997 to 2022. The bibliometix R-package and VOSviewer software were used in this study. The searches retrieved a total of 663 documents, from 69 countries, distributed among all continents, which China (328), India (51) and Japan (40) were the most productive countries. Important journals in the environmental area and with high impact factor, such as Chemical Engineering Journal (44), Applied Clay Science (38), Journal of Hazardous Materials (35) and Chemosphere (27) most published in the area. The network of keywords used by the authors indicates that the publications retrieved deal mainly with aspects related to the efficiency of (LDHs) in the removal of different pollutants, the composition, the synthesis route and the association with other materials and/or techniques. The result of this study constitutes an important tool for directing future research on the subject.

Recent advances in Metal Organic Framework (MOF)-based hierarchical composites for water treatment by adsorptional photocatalysis: A review

Architecting a desirable and highly efficient nanocomposite for applications like adsorption, catalysis, etc. has always been a challenge. Metal Organic Framework (MOF)-based hierarchical composite has perceived popularity as an advanced adsorbent and catalyst. Hierarchically structured MOF material can be modulated to allow the surface interaction (external or internal) of MOF with the molecules of interest. They are well endowed with tunable functionality, high porosity, and increased surface area epitomizing mass transfer and mechanical stability of the fabricated nanostructure. Additionally, the anticipated optimization of nanocomposite can only be acquired by a thorough understanding of the synthesis techniques. This review starts with a brief introduction to MOF and the requirement for advanced nanocomposites after the setback faced by conventional MOF structures. Further, we discussed the background of MOF-based hierarchical composites followed by synthetic techniques including chemical and thermal treatment. It is important to rationally validate the successful nanocomposite fabrication by characterization techniques, an overview of challenges, and future perspectives associated with MOF-based hierarchically structured nanocomposite.

Recent advances in the biological treatment of wastewater rich in emerging pollutants produced by pharmaceutical industrial discharges

Pharmaceuticals and personal care products present potential risks to human health and the environment. In particular, wastewater treatment plants often detect emerging pollutants that disrupt biological treatment. The activated sludge process is a traditional biological method with a lower capital cost and limited operating requirements than more advanced treatment methods. In addition, the membrane bioreactor combines a membrane module and a bioreactor, widely used as an advanced method for treating pharmaceutical wastewater with good pollution performance. Indeed, the fouling of the membrane remains a major problem in this process. In addition, anaerobic membrane bioreactors can treat complex pharmaceutical waste while recovering energy and producing nutrient-rich wastewater for irrigation. Wastewater characterizations have shown that wastewater's high organic matter content facilitates the selection of low-cost, low-nutrient, low-surface-area, and effective anaerobic methods for drug degradation and reduces pollution. However, to improve the biological treatment, researchers have turned to hybrid processes in which all physical, chemical, and biological treatment methods are integrated to remove various emerging contaminants effectively. Hybrid systems can generate bioenergy, which helps reduce the operating costs of the pharmaceutical waste treatment system. To find the most effective treatment technique for our research, this work lists the different biological treatment techniques cited in the literature, such as activated sludge, membrane bioreactor, anaerobic treatment, and hybrid treatment, combining physicochemical and biological techniques.

Cross-linked quaternized polyethersulfone-amino crystalline nanocellulose composite membrane for enhanced phosphate removal from wastewater

Cross-linked quaternized polyethersulfone (QPES) hybrid mixed polymer membranes (MPMs) loading amino crystalline nanocellulose (ACNC) were successfully fabricated and applied for phosphate removal. The successful production of novel materials was validated by microscopic, spectral, and microanalytical methods. When compared to the native QPES membrane, the primary qualities of QPES hybrid membranes (hydrophilicity, porosity, permeability, antifouling) have been greatly improved overall. In addition, the surface zeta potential (SZP) and ion exchange capacity (IEC) measurements demonstrated the high positive surface charge densities of MPMs, which is beneficial for phosphate uptake. Phosphate adsorption by these membranes was studied at different temperatures, contact times, and initial phosphate concentrations using batch experiments, to investigate the optimal conditions for phosphate uptake. The MPMs showed excellent adsorption capacities with maximal removal capacities in the range of 68.8-87.95 %. Phosphate adsorption on MPMs was regulated primarily by the Sips isotherm model with multilayer adsorption capabilities and exhibited pseudo-second order kinetics (R² = 0.9951-0.9976). The positive ΔH° and ΔS° values are indicative of the endothermic nature of phosphate adsorption and randomness increase. The negative ΔG° value indicates the spontaneousity of phosphate adsorption. Phosphate removal effectiveness of the membranes was maintained following recovery and regeneration with NaOH.

Poly(N-isopropyl acrylamide)-co-poly(sodium acrylate) hydrogel for the adsorption of cationic dyes from aqueous solution

In this study, we used radical polymerization to create poly (N-isopropyl acrylamide)-co-poly (sodium acrylate) [PNIPAM-co-PSA] hydrogels and analyzed the resulting products. N, N'-Methylenebisacrylamide was employed as a cross-linker, ammonium persulfate as an initiator, and N,N'-isopropyl acrylamide and sodium acrylamide as monomers. Structural analysis was measured by using FT-IR. Indeed, SEM analysis was used to characterize the morphological structure of the hydrogel. Studies on swelling were also done. The Taguchi approach was used to study and assess the adsorption studies of the hydrogels for the efficient removal of malachite green and methyl orange. For the optimization, a central composite surface methodology was applied. The effect of several parameters, including adsorbent dosage, pH, initial dye concentration, temperature, time, and mixing speed, was examined using the Taguchi technique, and the primary factors were chosen and examined using the central composite surface methodology. It was discovered that MG dye's (cationic) removal efficiency was higher than that of MO dye's (anionic). The results suggest that [PNIPAM-co-PSA] hydrogel can be used as an effective, alternative and promising adsorbent to be applied in the treatment of effluents containing the cationic dyes from wastewater. The synthesis of hydrogels provides a suitable recyclability platform for the adsorption of cationic dyes and allows for their recovery without the use of powerful reagents.

Electrodeposition of Ag/ZIF-8-Modified Membrane for Water Remediation

Metal-organic framework (MOF)-based membranes have been widely used in gas and liquid separation due to their porous structures and tunable compositions. Depending on the guest components, heterostructured MOFs can exhibit multiple functions. In the present work, we report a facile and rapid preparation of zeolitic imidazolate framework-8 (ZIF-8) and silver nanoparticle incorporated ZIF-8 (Ag/ZIF-8)-based membranes on stainless-steel mesh (SSM) through a "green" electrodeposition method. The SSM was first coated with a Zn-plated layer which contains mainly zinc hydroxide nitrate (Zn₅(OH)₈(NO₃)₂·2H₂O) with a "leaf-like" morphology, providing anchoring points for the deposition of ZIF-8 and Ag/ZIF-8. It takes only 10 min to prepare a uniform coating of Zn₅(OH)₈(NO₃)₂·2H₂O in aqueous conditions without the use of a strong base; this is by far the most efficient way of making zinc hydroxide nitrate nanocrystals. Following a similar electrodeposition approach, ZIF-8 and Ag/ZIF-8-coated SSM can be prepared within 20 min by applying a small current. The encapsulation of Ag does not alter the chemical composition nor the crystal structure of ZIF-8. The resulting ZIF-8 and Ag/ZIF-8-coated SSM have been tested for their effectiveness for rhodamine B dye removal in a fast vacuum filtration setting. Additionally, growth of E. coli was significantly inhibited after overnight incubation with Ag/ZIF-8-coated SSM. Overall, we demonstrate a fast synthesis procedure to make ZIF-8 and Ag/ZIF-8-coated SSM membranes for organic dye removal with excellent antimicrobial activity.

Synthesis and characterization of porous reduced graphene oxide based geopolymeric membrane with titanium dioxide coating for forward osmosis application

Forward Osmosis (FO) is a promising separation technology with a wide range of applications in water and wastewater treatment. FO membrane is the core of the forward osmosis process. Recently, the organic membrane has been widely used for forward osmosis applications even though inorganic membrane has excellent mechanical properties, decent chemical resistance, high durability, high porosity, and good hydrophilicity. Nevertheless, the utilization of inorganic membrane is hindered by the heat-intensive steps involved in its fabrication and the use of expensive source material. Geopolymerization provides a cost-effective technique for the preparation of inorganic membranes because of its sintering-free steps and utilization of fly ash as source material. Herein, we present a sintering-free, environmentally friendly, and cost-effective synthesis of geopolymeric membrane for application in forward osmosis. Fly ash was mixed with alkaline activator solution and porous reduced graphene oxide (PRGO) to prepare geopolymer slurry. The hydrogen peroxide and egg albumen were used as foaming agent and surfactant, while the membrane surface was coated with titanium dioxide to enhance the hydrophilicity of the membrane surface. The PRGO content improved the mechanical properties of the geopolymeric membrane. The average maximum flux recorded was 21 L/m² h with geopolymer substrate having a pore size of 1.8 μm and hydrophilic coated layer pore size of 0.25 μm. The varying concentrations of PRGO control the substrate's mechanical properties and pore size, as well as provide new insights for future studies. These preliminary results show that low-cost geopolymer material is a promising candidate for FO membrane fabrication.

Porous adsorbent derived from acid activation of food waste biochar: A sustainable approach for novel removal chlorophenol in wastewater

In this study, porous biochar (PBC) was prepared by acid activation of biochar derived from food waste (FWBC) and used as a suitable approach for the removal of 4-chlorophenol (CP) in wastewater. The characterization of PBC and the influent of different experimental conditions are determined. After the acid activation process, the surface area, porosity, and functional groups of PBC were developed. The removal performances of CP (1 mg/L) by PBC and FWBC were archived at 97.8 and 82.1%, respectively. Adsorption kinetics and isotherms of CP were followed by the second-order and Langmuir models, respectively. The maximum capacities of CP uptake onto mono-layer of FWBC and PBC based on the Langmuir model were determined at 79.8 and 108.7 mg/g, respectively. Besides, PBC could remove more than 89% CP from wastewater within 45 min of reaction time and it is suitable to reuse 8 times with over 60% adsorption efficiency of CP. In addition, the adsorption mechanism and environmental impact were discussed in detail. This work could bring a sustainable approach to the treatment of CP in wastewater as well as the management of food waste in Vietnam.

Cross-Linked Carboxymethylcellulose Adsorbtion Membranes from Ziziphus lotus for the Removal of Organic Dye Pollutants

The goal of this study is to assess Ziziphus lotus's potential for producing carboxymethylcellulose adsorption membranes with the ability to adsorb methyl green from wastewaters by the revalorization of its cellulosic fraction. The cellulose from this feedstock was extracted by an alkaline process and TAPPI standard technique T 203 cm-99 and afterwards they were carboxymethylated. The obtained carboxymethylcelluloses were deeply characterized, being observed that the carboxymethylcellulose produced from the alkaline cellulose presented the higher solubility due to its lower crystallinity degree (53.31 vs. 59.4%) and its higher substitution degree (0.85 vs. 0.74). This carboxymethylcellulose was cross-linked with citric acid in an aqueous treatment in order to form an adsorption membrane. The citric acid provided rigidity to the membrane and although it was hydrophilic it was not soluble in water. By evaluating the potential of the produced membrane for the removal of pollutant dyes from wastewater, it was observed that the adsorption membrane prepared from the carboxymethylcellulose's produced from the Ziziphus lotus was able to remove 99% of the dye, methyl green, present in the wastewater. Thus, this work demonstrates the potential of the Ziziphus lotus for the production of a novel and cost-effective carboxymethylcellulose adsorption membrane with high capacity to treat wastewaters.

Assessment in carbon-based layered double hydroxides for water and wastewater: Application of artificial intelligence and recent progress

Layered double hydroxides (LDHs) are a class of clays with brucite like layers and intercalated anions. Hybrids of carbon nanomaterials and layered double hydroxides (C-LDHs) are promising nanomaterials due to their versatile properties and the large number of composition/preparation variables available for fine-tuning. Several techniques are available for the synthesis of these novel C-LDHs nanocomposites. This article assess developments in the synthesis and applications of C-LDHs in water and wastewater treatment via using artificial intelligence approaches. In addition, current challenges and possible strategies are discussed from the viewpoint of synthesis and application. It is concluded that the use of C-LDH is expected to produce interesting results. The anisotropic properties and good dispersion ability make them suitable to be used as particulates in the dispersion phase of electro-responsive and electro-rheological fluids. Although these materials have been tested for the removal of contaminants from single component solutions in water. In addition, application of artificial intelligence in this regard is discussed. At the end, the necessity of evaluating their performance in the removal of contaminants from multi-components solutions is proposed. Finally the challenges in obtaining material with precisely controlled particle sizes and morphology must be addressed.

Electrospun tannin-rich nanofibrous solid-state membrane for wastewater environmental monitoring and remediation

Heavy metal, organic dyes, and bacterial contamination in water endanger human/animals' health, and therefore, the detection, adsorption, and capturing of contaminants are essential for environmental safety. Ligand-rich membranes are promising for sensors, adsorption, and bacterial decontamination. Herein, tannin (TA)-reinforced 3-aminopropyltriethoxysilane (APTES) crosslinked polycaprolactone (PCL) based nanofibrous membrane (PCL-TA-APTES) was fabricated via electrospinning. PCL-TA-APTES nanofibers possess superior thermal, mechanical, structural, chemical, and aqueous stability properties than the un-crosslinked membrane. It changed its color from yellowish to black in response to Fe^2+/3+ ions due to supramolecular iron-tannin network (FeTA) interaction. Such selective sensing has been noticed after adsorption-desorption cycles. Fe³⁺ concentration, solution pH, contact time, and ligand concentration influence FeTA coordination. Under optimized conditions followed by image processing, the introduced membrane showed a colorimetric linear relationship against Fe³⁺ ions (16.58 μM-650 μM) with a limit of detection of 5.47 μM. The PCL-FeTA-APTES membrane could restrain phenolic group oxidation and result in a partial water-insoluble network. The adsorption filtration results showed that the PCL-FeTA-APTES membrane can be reused and had a higher methylene blue adsorption (32.04 mg/g) than the PCL-TA-APTES membrane (14.96 mg/g). The high capture efficiency of nanocomposite against Fe³⁺-based S. aureus suspension than Fe³⁺-free suspension demonstrated that Fe³⁺-bounded bacterium adhered to the nanocomposite through Fe³⁺/TA-dependent biointerface interactions. Overall, high surface area, rich phenolic ligand, porous microstructure, and super-wetting properties expedite FeTA coordination in the nanocomposite, crucial for Fe^2+/3+ ions sensing, methylene blue adsorption-filtration, and capturing of Fe³⁺-bounded bacterium. These multifunctional properties could promise nanocomposite membrane practicability in wastewater and environmental protection.

Graphene oxide-based nanomaterials for the treatment of pollutants in the aquatic environment: Recent trends and perspectives - A review

Graphene oxide can be used to store energy, as electrodes and purify industrial and domestic wastewater as photocatalysts and adsorbents because of its remarkable thermal, electrical, and chemical capabilities. Toward understanding graphene oxide (GO) based nanomaterials considering the background factors, the present review study investigated their characteristics, preparation methods, and characterization processes. The removal of contaminants from wastewater has recently been a focus of attention for materials based on GO. Progress in GO synthesis and surface modification has shown that they can be used to immobilize enzymes. It is possible to immobilize enzymes with varying characteristics on graphene-oxide-based substrates without sacrificing their functioning, thus developing a new environmental remediation platform utilizing nano biocatalysts. GO doping and co-doping with a variety of heterogeneous semiconductor-based metal oxides were included in a brief strategy for boosting GO efficiency. A high band-gap material was also explored as a possibility for immobilization, which shifts the absorption threshold to the visible range and increases photoactivity. For water treatment applications, graphene-based nanomaterials were used in Fenton reactions, photocatalysis, ozonation, photo electrocatalysis, photo-Fenton, and a combination of photon-Fenton and photocatalysis. Nanoparticles made from GO improved the efficiency of composite materials when used for their intended applications. As a result of the analysis, prospects and improvements are clear, especially when it comes to scaling up GO-based wastewater treatment technologies.

Removal of arsenic in acidic wastewater using Lead-Zinc smelting slag: From waste solid to As-stabilized mineral

High-arsenic wastewater has long been considered a major threat to ecological balance and human health because of its strong toxicity and high mobility. Herein, an environmentally friendly process was proposed for As removal and fixation in the form of As-stabilized mineral, using Lead-Zinc smelting (LZS) slag as the in situ Fe donor, neutralizer, and crystal seed. The slag was dissolved in the wastewater and released Fe and Ca ions, while simultaneously increasing the pH value of the solution to help scorodite synthesis. The dissolved Ca²⁺ ion preferentially reacted with SO₄^2- ion in the form of CaSO₄·2H₂O precipitate as in situ "seeds" for As precipitation. The dissolved Fe(II) and As(III) ions were oxidized to Fe(III) and As(V) ions by H₂O₂, and later reacted with each other to generated amorphous ferric arsenate on the surface of CaSO₄·2H₂O, and then evolved into scorodite crystals with high stability. With a Fe/As molar ratio of 2, a reaction temperature of 90 °C, and a reaction time of 12 h, 98.42% of As was effectively precipitated from the wastewater with an initial As concentration of 7530.00 mg/L. Moreover, the leached As concentration of the As-bearing precipitate in the TCLP test was 3.46 mg/L. The concentration of the residual As and heavy metals ions in the final filtrate was lower than local wastewater discharge standards, successfully realizing the treatment of smelting wastewater. In summary, a prospective process successfully shows a great potential for co-treatment of LZS wastewater and slag, which could advance the large-scale disposal of LZS plants.

Microfiltration Membranes for the Removal of Bisphenol A from Aqueous Solution: Adsorption Behavior and Mechanism

This study mainly investigated the adsorption behavior and mechanism of microfiltration membranes (MFMs) with different physiochemical properties (polyamide (PA), polyvinylidene fluoride (PVDF), nitrocellulose (NC), and polytetrafluoroethylene (PTFE)) for bisphenol A (BPA). According to the adsorption isotherm and kinetic, the maximum adsorption capacity of these MFMs was PA (161.29 mg/g) > PVDF (80.00 mg/g) > NC (18.02 mg/g) > PTFE (1.56 mg/g), and the adsorption rate was PVDF (K1 = 2.373 h−1) > PA (K1 = 1.739 h−1) > NC (K1 = 1.086 h−1). The site energy distribution analysis showed that PA MFMs had the greatest adsorption sites, followed by PVDF and NC MFMs. The study of the adsorption mechanism suggested that the hydrophilic microdomain and hydrophobic microdomain had a micro-separation for PA and PVDF, which resulted in a higher adsorption capacity of PA and PVDF MFMs. The hydrophilic microdomain providing hydrogen bonding sites and the hydrophobic microdomain providing hydrophobic interaction, play a synergetic role in improving the BPA adsorption. Due to the hydrogen bonding force being greater than the hydrophobic force, more hydrogen bonding sites on the hydrophobic surface resulted in a higher adsorption capacity, but the hydrophobic interaction contributed to improving the adsorption rate. Therefore, the distribution of the hydrophilic microdomain and hydrophobic microdomain on MFMs can influence the adsorption capacity and the adsorption rate for BPA or its analogues. These consequences provide a novel insight for better understanding the adsorption behavior and mechanism on MFMs.

Expanding the application of ion exchange resins for the preparation of antimicrobial membranes to control foodborne pathogens

Although ion exchange resins (IERs) have been extensively adopted in water treatment, there are no reports on the application thereof for synthesizing antibacterial materials against pathogenic bacteria. The present study is the first in which the ion exchange characteristic of IERs was utilized to introduce silver ions that possess efficient antibacterial properties. The resulting antibacterial materials were incorporated into polylactic acid (PLA) and/or polybutylene adipate terephthalate (PBAT) to prepare antibacterial membranes. XPS spectra revealed the occurrence of in-situ reduction of silver ions to metallic silver, which was preferable since the stability of silver in the materials was improved. EDS mapping analysis indicated that the distribution of silver was consistent with the distribution of sulfur in the membranes, verifying the ion exchange methodology proposed in the present study. To investigate the antibacterial performance of the prepared membranes, zone of inhibition tests and bacteria-killing tests were performed. The results revealed that neither bare polymeric membranes of PLA and PBAT nor IER-incorporated polymeric membranes exhibited noticeable antibacterial activities. In comparison, the antibacterial membranes demonstrated effective and sustainable antibacterial activities against pathogenic bacteria Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The prepared antibacterial membranes exhibited potential in food-related applications such as food packaging to delay food spoilage due to microbial growth.

Pretreatment for alleviation of RO membrane fouling in dyeing wastewater reclamation

Adsorption and coagulation were commonly used to alleviate reverse osmosis (RO) membrane fouling caused by dissolved organic matters (DOM), but the effects of changed composition and structure of DOM in dyeing wastewater after adsorption and coagulation on RO membrane fouling have seldom been studied. This study aimed at resolving the mechanism how the RO membrane fouling during dyeing wastewater treatment was alleviated by using adsorption and coagulation. The dyeing wastewater caused serious RO membrane fouling. Pretreatment with granular activated carbon (GAC), polyferric sulfate (PFS) and polyaluminum chloride (PACl) were conducted. It was shown that GAC could remove most of the DOM (95%) and preferred to adsorb protein, hydrophobic neutrals and fluorescent compounds. Both coagulants of PFS and PACl preferred to remove polysaccharides (the removal rate was 9-19% higher than that of DOM), high-MW compounds and these compounds with high fouling potential. Afterwards, the RO membrane fouling potential of the dyeing wastewater was tested. The GAC and PFS performed well to alleviate fouling. After GAC treatment, the decline rate of RO flux was similar to that of raw wastewater after 6-fold dilution. With pretreatment by PFS or PACl, the fouling potential of dyeing wastewater was much lower than that of raw wastewater after diluted to the same DOM content. Changes in polysaccharides content in the DOM had more effects on RO membrane fouling than that of proteins after these pretreatment. Although the DOM changed significantly after pretreatment, the fouling type was still intermediate blocking.

Removal of Doxycycline from Water using Dalbergia sissoo Waste Biomass Based Activated Carbon and Magnetic Oxide/Activated Bioinorganic Nanocomposite in Batch Adsorption and Adsorption/Membrane Hybrid Processes

The carbonaceous adsorbents, an activated carbon (AC) and a bioinorganic nanocomposite (MAC), were prepared using Dalbergia sissoo sawdust as waste biomass, in this study. Both the adsorbents were characterized by FTIR, EDX, SEM, XRD, TG/DTA, surface area, and a pore size analyzer. The adsorbents were used for the removal of an antibiotic, doxycycline (DC) antibiotic, from wastewater in order to minimize a load of antibiotics in industrial effluents and consequently the drug resistance problem. Initially, the effectiveness of adsorbent was confirmed using batch adsorption experiments where isothermal models like Langmuir, Freundlich Temkin, Jovanovic, and Harkins–Jura were utilized to govern the maximum adsorption capacity of AC and MAC while pseudo-first- and second-order kinetic models were used to estimate the values of different kinetic parameters. Langmuir model best accommodated the equilibrium data whereas the pseudo-second-order kinetic model finest trimmed the kinetics data. The effect of pH on adsorption was also evaluated where maximum removal was observed between pH 5 and 7 by both adsorbents. The effect of temperature on adsorption was evaluated where the entropy change (ΔS⁰) comes out to have a numerically positive value whereas Gibbs free energy change (ΔG⁰) and enthalpy change (ΔH⁰) were negative indicating the spontaneous nature and feasibility of the procedure. The robust technology of membrane separation is rapidly replacing the conventional technologies but at the same time suffers from the problem of membrane fouling. As pretreatment, the AC and MAC were used in hybrid with ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) membranes whereas permeate fluxes and percent retention of DC were compared for naked membrane operations and AC/membrane and MAC/membrane process. The permeate fluxes for MAC/membrane processes were greater as compared to AC/membrane and naked membrane processes showing the effectiveness of the bioinorganic composite as foul control and consequently recovery of DC from effluents. The percent retention of the UF membrane was lower as compared to NF and RO membranes. Improvement in percent retention for UF/AC, UF/MAC, NF/AC, NF/MAC, RO/AC, and RO/MAC was observed. The bioinorganic composite MAC contains a magnetic iron oxide which was effectively removed from slurry after use through the magnetic process and that was the main reason for high permeate fluxes in MAC/membrane operations.

A critical review of advanced nanotechnology and hybrid membrane based water recycling, reuse, and wastewater treatment processes

One of the modern challenges is to provide clean and affordable drinking water. Water scarcity is caused by the growing population in the world and pollutants contaminate all remaining water sources. Innovative water treatment solutions have been provided by nanotechnology. Microorganisms, organic suspensions, and inorganic heavy metal ions, among other things, are common water contaminants. Since antiquity, a wide range of water clean-up methods have been employed to address this issue. Breakthroughs in water purification procedures have occurred during the previous four decades, with the most significant one being the use of nanomaterials and nanomembranes. Nanoparticles and nanomembranes (polymeric membranes) have recently been used in engineered materials (TiO₂, ZnO, CuO, Ag, CNT's and mixed oxide nanoparticles, for example). Engineered nanomembranes, nanocomposites and nanoparticles have been used in this review article's discussion of water purification technologies. The review also discusses the risk and solutions of using nanoparticles and nanocomposites in the future.

Applications of Nano-Zeolite in Wastewater Treatment: An Overview

Nano-zeolite is an innovative class of materials that received recognition for its potential use in water and tertiary wastewater treatment. These applications include ion-exchange/sorption, photo-degradation, and membrane separation. The aim of this work is to summarize and analyze the current knowledge about the utilization of nano-zeolite in these applications, identify the gaps in this field, and highlight the challenges that face the wide scale applications of these materials. Within this context, an introduction to water quality, water and wastewater treatment, utilization of zeolite in contaminant removal from water was addressed and linked to its structure and the advances in zeolite preparation techniques were overviewed. To have insights into the trends of the scientific interest in this field, an in-depth analysis of the variation in annual research distribution over the last decade was performed for each application. This analysis covered the research that addressed the potential use of both zeolites and nano-zeolites. For each application, the characterization, experimental testing schemes, and theoretical analysis methodologies were overviewed. The results of the most advanced research were collected, summarized, and analyzed to allow an easy visualization and comparison of these research results. Finally, the gaps and challenges that face these applications are concluded.

Novel application of ion exchange membranes for preparing effective silver and copper based antibacterial membranes

Ion exchange membranes (IEMs) are widely used in water treatment applications such as electrodialysis. However, the exploration of IEMs as effective antibacterial food contact materials (e.g., food packaging membranes) against pathogenic bacteria to ensure food safety has not been reported. Here, we report a simple but effective method to prepare high performance antibacterial membranes via ion exchange coupled with in-situ reduction. The general membrane properties are characterized using SEM, EDS, FTIR, XPS, XRD, DSC, TGA, water uptake, etc. The distribution of silver and copper in the membranes are generally in line with the distribution of sulfur, indicating that the antibacterial ions are introduced into the membranes via ion exchange and are bonded with the sulfonate groups in the membranes. The antibacterial performance is investigated using zone of inhibition tests and continuous bacteria growth inhibition tests. All of the prepared membranes show obvious antibacterial activities compared to the bare cation exchange membranes. The diameters of inhibition zone against Staphylococcus aureus (S. aureus) are all larger than those of Escherichia coli (E. coli), indicating that the prepared membranes are more efficient in inhibiting S. aureus compared to E. coli. Furthermore, the silver-based membrane shows more sustainable antibacterial activities compared to the copper-based membrane. Especially, the results clearly reveal that the silver-based membrane is capable of killing bacteria instead of just inhibiting the growth of bacteria. We have shown for the first time that membranes derived from IEMs have the potential as food contact materials to inhibit the growth of pathogenic bacteria so as to eliminate the risk of bacterial infections and meanwhile delay food spoilage due to bacteria growth.