Has the question of e-waste opened a Pandora's box? An overview of unpredictable issues and challenges

Leaching profile of per- and polyfluoroalkyl substances from selected e-waste components and potential exposure pathways from discarded components

Improper handling and disposal of Waste Electrical and Electronic Equipment (WEEE) containing PFAS can lead to the release of these substances into the environment. In this study, we have collected and characterized PFAS leaching profiles of selected e-waste components, including keyboards, cables, monitor screens, and circuit boards, and discussed potential PFAS exposure routes during e-waste disposal by landfilling and associated environmental and health risks. The e-waste components were disassembled, separated, sorted, shredded, and grounded, and leaching experiments were conducted for 30 days to elucidate the potential release and distribution of PFAS from the e-waste components into the environment. PFAS were extracted by solid phase extraction and analyzed through liquid chromatography-mass spectrometry (LC-MS/MS) in e-waste leachate samples to investigate their occurrence and composition in the different e-waste components. The leachate from the e-waste components had 21 out of the 40 PFAS analyzed, in which the most predominant and abundant were perfluorobutanoic acid, perfluorohexanoic acid, perfluorooctanoic acid, and perfluorooctanesulfonic acid. The cables had the highest sum of PFAS in the leachate with concentrations up to 465 ng/kg. Mobilization of PFAS from e-waste components deposited in landfills through leachate requires proper management practices to protect the environment and public health.

Do urinary metabolites reflect occupational exposure to organophosphate flame retardants? A case study in electronic waste recycling workers

Organophosphate esters (OPEs) are commonly used in electronic devices to meet safety standards, but electronic-waste recycling (e-recycling) workers may face significant exposure to those potentially hazardous compounds in their workplace. We examined the relationship between urinary OPE metabolites and their parent compounds in the air, in Canadian e-recycling facilities. We collected personal air samples and end-of-shift urine samples from workers at six e-recycling facilities. We employed linear and Tobit regression models to assess associations between air concentrations of triphenyl phosphate (TPhP) and three metabolites, of tris (2-chloroethyl) phosphate (TCEP) and two metabolites, of tris (2-chloroisopropyl) phosphate (TCPP) and two metabolites, of tris (1,3-dichloro-2-propyl) phosphate (TDCPP), and of tris (2-butoxyethyl) phosphate (TBOEP) and one metabolite each. The 85 participants, mostly male (78 %) and aged between 25 and 54, had concentrations of OPEs detected in 90-100 % of air samples, with geometric means of TPhP, TCEP, TBOEP and TDCPP, of 351, 404, 261 and 250 picomoles per cubic metre respectively. The proportion of detection of their corresponding metabolites varied between 32 % and 98 %. Regression models including the urinary flow rate as a covariate showed that a doubling of the air concentration of TCEP was associated with a 42-107 % increase in its metabolites, and a doubling of air concentration of TBOEP, with a 77 % increase. The paucity of data on the toxicokinetics of OPEs limits the determination of appropriate urinary metabolites to monitor OPE occupational exposure. Such additional data, in combination with workplace contextual information, may help clarify the major routes of exposure and the corresponding contributing sources.

Human exposure to polychlorinated alkanes (C8-36) in soil and dust from Nigerian e-waste sites: Occurrence, homologue pattern and health risk assessment

Electronic waste (e-waste) dismantling and dumpsite processes are recognized as significant sources of chlorinated paraffin (CP) exposure. This study aims to investigate the environmental occurrence and distribution of polychlorinated alkanes (PCAs-C8-36), specifically in soil and outdoor dust samples collected from e-waste dumpsites and automobile dismantling and resale sites in Nigeria. The results revealed a widespread occurrence of PCAs across all sampled locations. For the PCAs homologue groups ∑PCAs-C10-13, ∑PCAs-C14-17, and ∑PCAs-C18-20, the median concentrations were 1150 ng/g dry weight (dw), 1180 ng/g dw, and 370 ng/g dw in the dust samples, and 2840 ng/g dw, 1820 ng/g dw, and 830 ng/g dw in the soil samples, respectively. Notably, the homologue distribution patterns of PCAs-C8-36 were similar in both dust and soil samples. However, PCAs-C10-13 was found to be higher in the soil samples, likely due to the wet and/or dry deposition effect of the aerosols, given these chemicals' volatile nature and ease of atmospheric dispersion. Pearson correlation analysis further revealed a co-occurrence of contaminants in the soil samples, supporting the hypothesis that soil acts as a sink for persistent organic pollutants (POPs). Additionally, lower molecular weight polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) showed reduced correlation with the PCAs. Health risk assessments indicated that working on e-waste sites could potentially pose a risk to the workers' health. This study highlights the urgent need for mitigating occupational exposure to PCAs, especially in informal e-waste processing environments where personal protective measures are often lacking.

Health Effects of Heavy Metal Exposure Among E-waste Workers and Community-dwelling Adults in Thailand: A Cross-sectional Study

OBJECTIVES

Global concern is increasing about the health effects of electronic waste (e-waste). This study examines the health impacts of heavy metal (HM) exposure among e-waste workers (EWWs) and community-dwelling adults (CDAs) in Northeastern Thailand and identifies factors associated with adverse health outcomes.

METHODS

A cross-sectional study was conducted of 164 EWWs and 164 CDAs. A survey was employed to collect data on participant characteristics, symptoms, anxiety, depression, and sleep quality. Urine samples were analyzed for lead (Pb) and cadmium (Cd) levels using atomic absorption spectrometry. Multiple logistic regression analysis was used to identify factors impacting health.

RESULTS

Across all participants, urinary Pb and Cd levels ranged from 5.30 µg/g to 29.50 µg/g creatinine and from 0.60 µg/g to 4.00 µg/g creatinine, respectively. The most frequently reported health issues pertained to musculoskeletal disorders (MSDs) at 38.70%, central nervous system (CNS) issues at 36.60%, and skin disorders at 31.10%. Multivariable analysis indicated that the presence of MSDs was significantly associated with exposure to Pb and Cd. Poor sleep quality (PSQ) was significantly linked to CNS problems, while body mass index was significantly related to skin disorders. Factors including primary education level or below, smoking, cleaning the house more than 3 times weekly, and PSQ were significantly linked to depression. Anxiety was significantly associated with PSQ.

CONCLUSIONS

Environmental exposure to Pb and Cd can have adverse health impacts in the form of MSDs. Depression and anxiety are common conditions among CDAs. Public health officials should monitor HM exposure and mental health within the community.

E-waste recycling in an optimized way for copper recovery by leaching and a case study on E-waste generation and management in Dhaka city

The widespread adoption of electronic devices has enhanced living standards but has also led to a surge in electronic waste (e-waste), creating serious environmental and health challenges. Although various methods exist to recover valuable metals from e-waste, each has notable drawbacks. Among these, chemical leaching with aqua regia is widely used but is both highly corrosive and hazardous. This study introduces a safer, more environmentally friendly approach to copper recovery from e-waste using an iron-based leaching solution. A combination of experimental procedures and computational modeling was employed to optimize copper extraction from printed circuit boards (PCBs). The experiments involved treating PCBs with iron-based solutions of different concentrations and testing the effectiveness over two distinct time periods. The most effective recovery rate, 72.69 % over five days, was achieved using a 50:50 mixture of ferrous and ferric sulfate. Computational analysis with Python's SciPy library further identified 5.92 g of PCB as the ideal input quantity for the process. In addition to the lab-based work, a survey of Dhaka's primary e-waste recycling hubs, Nimtoli and Elephant Road, revealed that approximately 1173 tons of e-waste are processed in these areas each year. Based on experimental findings, the survey findings have a projection to generate over 35 million BDT annually through copper recovery. However, despite government initiatives to regulate e-waste management, unsafe handling practices remain widespread. These practices not only endanger workers and the environment but also hinder regulatory efforts. The study emphasizes the urgent need for stricter regulations, greater public awareness, and the adoption of eco-friendly methods, like the proposed iron-based solution, to ensure safer and more effective copper recovery.

Increased health risk from co-exposure to polycyclic aromatic hydrocarbons, phthalates, and per- and polyfluoroalkyl substances: Epidemiological insight from e-waste workers in Hong Kong

The alarming surge in electronic waste (e-waste) in Hong Kong has heightened concerns regarding occupational exposure to a myriad of pollutants. Among these, polycyclic aromatic hydrocarbons (PAHs), phthalates (PAEs), and per- and polyfluoroalkyl substances (PFASs) are prevalent and known for their harmful effects, including the induction of oxidative stress and DNA damage, thereby contributing to various diseases. This study addresses gaps in knowledge by investigating exposure levels of these pollutants-measured via hydroxylated PAHs (OH-PAHs), phthalate metabolites (mPAEs), and PFASs-in urine from 101 e-waste workers and 100 office workers. E-waste workers exhibited higher concentrations of these substances compared to office workers. Elevated urinary levels of OH-PAHs, mPAEs, and PFASs correlated significantly with increased 8-hydroxy-2-deoxyguanosine (8-OHdG) levels (β = 2.53, 95 % CI: 2.12-3.02). The association between short-chain PFASs (Perfluoropentanoic acid, PFPeA) and DNA damage was discovered for the first time. Despite most participants (95 %) showing hazard index (HI) values below non-carcinogenic risk thresholds for PAHs and PAEs, certain pollutants posed higher risks among e-waste workers, necessitating enhanced protective measures. Moreover, the 95th percentile of carcinogenic risk associated with diethylhexyl phthalate (DEHP) exceeded 10-4 in both groups, highlighting the urgent need for regulatory measures to mitigate DEHP exposure risks in Hong Kong.

Design, Implementation and Environmental Impact of Cutoff Wall for Pollution Control in an Industrial Legacy Site

Heavy metal-organic pollutants compound pollution at industrial legacy sites and have caused damage to the ecological environment and human health during recent decades. In view of the difficulty and high cost of post-contamination remediation, it is worth studying, and practically applying, cutoff walls to reduce the spread of pollution in advance. In this study, field-scale studies were carried out at e-waste dismantling legacy sites in Taizhou, Zhejiang Province of China, through the process of site investigation, numerical simulation, and cutoff wall practical application. Firstly, the concentrations and spatial distributions of Pb, Cd and polychlorinated biphenyls (PCBs) and poly brominated diphenyl ethers (PBDEs) were identified in both soil and groundwater. Then, potential dispersal routes of key combined contaminants (Pb and PCBs) at the soil-groundwater interface were systematically studied through numerical simulation applying Visual MODFLOW-MT3DMS. One site was chosen to predict the barrier effect of differently sized cutoff walls based on the migration path of compound pollutants. A protocol for a cutoff wall (50 m length × 2 m width × 3 m height) was finally verified and applied at the real contaminated site for the blocking of compound pollutant diffusion. Further, the groundwater quality of the contaminated site was monitored consecutively for six months to ensure the durability and stability of barrier measures. All pollutant indicators, including for Pb and PCB complex pollutants, were reduced to below the national Grade IV groundwater standard value, achieving environmental standards at these polluted sites and providing possibilities for land reuse. In summary, this field-scale test provided new ideas for designing cutoff walls to block the diffusion of complex pollutants; it also laid a basis for the practical application of cutoff walls in pollution prevention and control of complex contaminated sites and for soil-groundwater environmental protection at industrial heritage sites.

In silico prediction of carcinogenic mechanisms induced by mixture of toxic substances from E-waste dust

Humans are constantly exposed to low doses of various metals and organic compounds in electronic waste (e-waste) recycling areas. Although these substances individually have been identified as environmental carcinogens that influence the onset and progression of tumors, their combined effect on human cancers has not been sufficiently investigated. For this reason, the goal of the current analysis is to evaluate the possible molecular mechanisms between exposure to a mixture of As, Cd, Cr, Hg, Pb, Sb, DBDE, DBDPE, and TBBPA from e-waste and the onset and progression of common human cancers via in silico toxicogenomic tools. The CTD, GeneMANIA, ToppGene Suite portal, and TIMER2 online server were utilized as the primary data-mining tools. Eleven genes that were linked to different types of cancer were found to be shared by most of the substances under investigation. Notably, co-expression (58.91 %) was the most common interaction among these genes. The examined mixture's primary molecular route linked to human cancers was found to be the interleukin 4 and interleukin 13 signaling pathway, which was further connected to the macrophage infiltration. These results underline the critical need for the future research that focus on examining the 11 particular genes as well as the mechanism involving IL4/IL13-mediated macrophage infiltration, to address this environmental health hazard and the development of targeted tumor prevention and control policies for populations exposed to the toxic substance from e-waste recycling process.

Circular economy, economic growth, and e-waste generation in EU27 countries: Further evidence from the novel circular economy index and threshold effect

The circular economy has been identified as a critical keyword for achieving the Sustainable Development Goals. Nevertheless, there is a lack of in-depth empirical literature on the impact mechanisms of the circular economy (CE) and economic growth (GDP) in mitigating e-waste generation (waste electrical and electronic equipment - WEEE). Given Europe's leading position in e-waste generation per capita, the study aims to scrutinize the interplay between CE, GDP, and WEEE for 2010-2020. The research applies advanced econometric methods, primarily centered around the system generalized method of moment and dynamic panel threshold. It was noteworthy that different CE indicators exhibited varying effects on WEEE through the econometric analysis. Therefore, the research uniquely utilized the entropy weight method to compute a holistic composite index for the circular economy (CEI) and gained some interesting findings. Firstly, CEI significantly reduced WEEE, while GDP drove its increase. However, an overly developed CEI of 0.7616 counteracted its beneficial effect. Secondly, the synergy of CEI*GDP engendered the circular economy rebound effect, diminishing environmental benefits. Thirdly, in the circular context, the environmental Kuznets curve was validated, showcasing an inverted U-shaped pattern. Finally, the study found CEI to have different threshold effects, with thresholds of 0.2161 to inhibit WEEE, 0.2114 to avert the circular economy rebound effect, and 0.2360 to leverage GDP in reducing WEEE. These outcomes give insights to policymakers in designing sound policies targeting circular economy development and decoupling e-waste generation from economic growth towards the United Nations' SDGs.

Cross-shift changes in pulmonary function and occupational exposure to particulate matter among e-waste workers in Ghana

Introduction

Little is known on the association between cross-shift changes in pulmonary function and personal inhalation exposure to particulate matter (PM) among informal electronic-waste (e-waste) recovery workers who have substantial occupational exposure to airborne pollutants from burning e-waste.

Methods

Using a cross-shift design, pre- and post-shift pulmonary function assessments and accompanying personal inhalation exposure to PM (sizes <1, <2.5 μm, and the coarse fraction, 2.5-10 μm in aerodynamic diameter) were measured among e-waste workers (n = 142) at the Agbogbloshie e-waste site and a comparison population (n = 65) in Accra, Ghana during 2017 and 2018. Linear mixed models estimated associations between percent changes in pulmonary function and personal PM.

Results

Declines in forced expiratory volume in one second (FEV1) and forced vital capacity (FVC) per hour were not significantly associated with increases in PM (all sizes) among either study population, despite breathing zone concentrations of PM (all sizes) that exceeded health-based guidelines in both populations. E-waste workers who worked "yesterday" did, however, have larger cross-shift declines in FVC [-2.4% (95%CI: -4.04%, -0.81%)] in comparison to those who did not work "yesterday," suggesting a possible role of cumulative exposure.

Discussion

Overall, short-term respiratory-related health effects related to PM exposure among e-waste workers were not seen in this sample. Selection bias due to the "healthy worker" effect, short shift duration, and inability to capture a true "pre-shift" pulmonary function test among workers who live at the worksite may explain results and suggest the need to adapt cross-shift studies for informal settings.

The role of exogenous hydrogen sulfide in mitigating cadmium toxicity in plants: A comprehensive meta-analysis

Reducing the accumulation of cadmium (Cd) and mitigating its toxicity are pivotal strategies for addressing Cd pollution's threats to agriculture and human health. Hydrogen sulfide (H2S) serves as a signaling molecule, playing a crucial role in plant stress defense mechanisms. Nevertheless, a comprehensive assessment of the impact of exogenous H2S on plant growth, antioxidant properties, and gene expression under Cd stress remains lacking. In this meta-analysis, we synthesized 575 observations from 27 articles, revealing that exogenous H2S significantly alleviates Cd-induced growth inhibition in plants. Specifically, it enhances root length (by 8.71%), plant height (by 15.67%), fresh weight (by 15.15%), dry weight (by 22.54%), and chlorophyll content (by 27.99%) under Cd stress conditions. H2S boosts antioxidant enzyme activity, particularly catalase (CAT), by 39.51%, thereby reducing Cd-induced reactive oxygen species (ROS) accumulation. Moreover, it impedes Cd translocation from roots to shoots, resulting in a substantial 40.19% reduction in stem Cd content. Additionally, H2S influences gene expression in pathways associated with antioxidant enzymes, metal transport, heavy metal tolerance, H2S biosynthesis, and energy metabolism. However, the efficacy of exogenous H2S in alleviating Cd toxicity varies depending on factors such as plant species, concentration of the H2S donor sodium hydrosulfide (NaHS), application method, and cultivation techniques. Notably, NaHS concentrations exceeding 200 μM may adversely affect plants. Overall, our study underscores the role of exogenous H2S in mitigating Cd toxicity and elucidates its mechanism, providing insights for utilizing H2S to combat Cd pollution in agriculture.

Influence of Canadian provincial stewardship model attributes on the cost effectiveness of e-waste management

This paper presents a comprehensive analysis of e-waste collection and management trends across six Canadian provinces, focusing on e-waste collection rates, provincial stewardship model attributes, program strategies and budget allocations from 2013 to 2020. Temporal and regression analyses were conducted using data from Electronic Product Recycling Association reports. A group characterization based on geographical proximity is proposed, aiming to explore the potential outcomes of fostering collaboration among neighboring provinces. The analysis emphasizes the significant impact of stewardship model attributes on e-waste collection rates, with Quebec emerging as a standout case, showcasing a remarkable 61.5% surge in collection rates. Findings from group analysis reveal a positive correlation between per capita e-waste collection rate and the growth of businesses and collection sites in Western Canada (Group A - British Columbia, Saskatchewan, and Manitoba). This highlights the potential benefits of a coordinated waste management approach, emphasizing the importance of shared resources and collaborative policies. Saskatchewan and Manitoba allocated only 6.6% and 7.0% of their respective budgets to e-waste transfer and storage. British Columbia's observed steady decrease of e-waste collection rate. In Group A, stewards handled 2.18-13.95 tonnes of e-waste during the study period. The cost per tonne of e-waste tended to be lower when more e-waste is managed per steward, suggesting the potential benefits of an integrated e-waste collection and management system.

An in-depth analysis and review of management strategies for E-waste in the south Asian region: A way forward towards waste to energy conversion and sustainability

The soaring rise of electronic and electrical waste (E-waste) leads to significant challenges to the South Asian region, urging for incorporating comprehensive assessment and management strategies. The research dives into the intricacies of E-waste and examines how regulatory barriers, public ignorance, and the limited lifespan of electronic devices all contribute to the significant production of E-waste. This study emphasizes the vital need for ongoing and appropriate management practices by bringing attention to the short lifespan of electronic devices and the resulting generation of E-waste. This work also addresses the increased risks that people who live close to informal recycling sites for electronic waste face, as well as the dangerous substances that are found in them and how they harm the environment and human health. Furthermore, in order to promote circular economies and increase productivity, the study assesses management practices in both developed and developing nations, placing special emphasis on component reuse and recycling. Along with addressing the grave consequences of the illicit E-waste trade on the environment, particularly in developing nations, this review attempts to enlighten stakeholders and policymakers about the vital need for coordinated efforts to address the issues related to E-waste in the South Asian region by offering insights into E-waste assessment and management techniques.

Integrated transcriptomic and metabolomic analysis reveals the potential mechanisms underlying indium-induced inhibition of root elongation in wheat plants

Soil contamination by indium, an emerging contaminant from electronics, has a negative impact on crop growth. Inhibition of root growth serves as a valuable biomarker for predicting indium phytotoxicity. Therefore, elucidating the molecular mechanisms underlying indium-induced root damage is essential for developing strategies to mitigate its harmful effects. Our transcriptomic findings revealed that indium affects the expression of numerous genes related to cell wall composition and metabolism in wheat roots. Morphological and compositional analysis revealed that indium induced a 2.9-fold thickening and a 17.5 % increase in the content of cell walls in wheat roots. Untargeted metabolomics indicated a substantial upregulation of the phenylpropanoid biosynthesis pathway. As the major end product of phenylpropanoid metabolism, lignin significantly accumulated in root cell walls after indium exposure. Together with increased lignin precursors, enhanced activity of lignin biosynthesis-related enzymes was observed. Moreover, analysis of the monomeric content and composition of lignin revealed a significant enrichment of p-hydroxyphenyl (H) and syringyl (S) units in root cell walls under indium stress. The present study contributes to the existing knowledge of indium toxicity. It provides valuable insights for developing sustainable solutions to address the challenges posed by electronic waste and indium contamination on agroecosystems.

Challenges to implement and operationalize the WEEE reverse logistics system at the micro level

Waste electrical and electronic equipment (WEEE) possesses unique characteristics such as its growing production and the potential for resource extraction due to its composition. The implementation and operationalization of a reverse logistics system (RLS) for WEEE is a challenge, particularly concerning the micro level. The implementation of such systems often prioritizes urban centers and their higher population densities, generally overlooking the micro level. The latter refers to ward- or village-level divisions, which can be regarded as the smallest administrative divisions of both urban and rural areas. Furthermore, it encompasses any area facing logistical challenges regarding RLS operationalization due to factors such as geographical isolation, budgetary constraints, imbalances, social isolation, environmental aspects, and even geopolitical conflicts. This study is aimed at addressing this literature gap by discussing the challenges to implement and operationalize a WEEE RLS at the micro level. A systematic literature review was employed as our methodology. We found 13 challenges for developed and developing countries without distinction between macro and micro levels. An additional approach highlighted the significance of monitoring and controlling WEEE RLS. The challenge The population and LRS entities' lack or insufficient training and awareness received the most citations in the conducted search. These challenges were organized by operational phase and discussed from the perspective of the micro level to comprehend multifactorial local challenges involving all stakeholders in the reverse logistics of WEEE in emerging nations. This can assist local administrators and constitutes the primary contribution of this study.

Prenatal Exposure to Heavy Metals and Adverse Birth Outcomes: Evidence From an E-Waste Area in China

Electronic waste that has not been properly treated can lead to environmental contamination including of heavy metals, which can pose risks to human health. Infants, a sensitive group, are highly susceptible to heavy metals exposure. The aim of this study was to investigate the association between prenatal heavy metal exposure and infant birth outcomes in an e-waste recycling area in China. We analyzed cadmium (Cd), chromium (Cr), manganese (Mn), lead (Pb), copper (Cu), and arsenic (As) concentrations in 102 human milk samples collected 4 weeks after delivery. The results showed that 34.3% of participants for Cr, which exceeds the World Health Organization (WHO) guidelines, as well as the mean exposure of Cr exceeded the WHO guidelines. We collected data on the birth weight (BW) and length of infants and analyzed the association between metal concentration in human milk and birth outcomes using multivariable linear regression. We observed a significant negative association between the Cd concentration in maternal milk and BW in female infants (β = -162.72, 95% CI = -303.16, -22.25). In contrast, heavy metals did not associate with birth outcomes in male infants. In this study, we found that 34.3% of participants in an e-waste recycling area had a Cr concentration that exceeded WHO guidelines, and there was a significant negative association between prenatal exposure to the Cd and infant BW in females. These results suggest that prenatal exposure to heavy metals in e-waste recycling areas may lead to adverse birth outcomes, especially for female infants.

A review of various strategies in e-waste management in line with circular economics

Waste management of electrical and electronic equipment has become a key challenge for electronics manufacturers due to globalization and the rapid expansion of information technology. As the volume of e-waste grows, legal departments lack the infrastructure, technology, and ability to collect and manage it environmentally soundly. Government laws, economic reasons, and social issues are important considerations in e-waste management. The circular economy concept is built on reusing and recycling goods and resources. A novel idea called the circular economy might prevent the negative consequences brought on by the exploitation and processing of natural resources while also having good effects such as lowering the demand for raw materials, cutting down on the use of fundamental resources, and creating jobs. To demonstrate the significance of policy implementation, the necessity for technology, and the need for societal awareness to build a sustainable and circular economy, the study intends to showcase international best practices in e-waste management. This study uses circular economy participatory implementation methods to provide a variety of possible approaches to assist decision-makers in e-waste management. The purpose of this article is to review the most accepted methods for e-waste management to emphasize the importance of implementing policies, technology requirements, and social awareness in creating a circular economy. To conclude, this paper highlights the necessity of a common legal framework, reform of the informal sector, the responsibility of different stakeholders, and entrepreneurial perspectives.

Informal E-waste recycling practices and environmental pollution in Africa: What is the way forward?

Globally, e-waste is the fastest growing and most valuable waste-stream. While countries worldwide are increasingly acknowledging the e-waste problem and introducing policies and regulations that deal with e-waste, large quantities of e-waste still go undocumented. Much of these global e-wastes are accumulating in open-dumpsites and landfills in African-countries where they are recycled informally resulting in significant environmental and public-health concerns. Although, there is a plethora of studies on e-waste management and disposal, only a few-studies have focused on African-countries who are major recipients of e-waste. Moreover, despite the attempts to mitigate the problem of e-waste in African-countries, e-waste has remained a major-concern and there are currently very limited workable solutions. This study examines informal e-waste recycling, environmental pollution and the extent of environmental and health impacts in major countries of concern including Ghana, Nigeria, Egypt, Kenya and South Africa. The global e-waste Waste Atlas Report, 2020 identified these countries as major recipients of e-waste. To achieve the aims of this research, previous studies from 2005 to 2022 are collected from various databases and analyzed. Accordingly, this study focuses on environmental pollution and public-health impacts resulting from e-waste dumping and informal recycling practices, illegal transboundary shipment of e-waste to the selected countries, and the interventions of governments and international organizations in reducing the impact of e-waste pollution and informal recycling practices in Africa. Based on the outcomes of this study, practical approaches on the way-forward are recommended. The findings of this study contribute to a growing-body of research on informal e-waste recycling practices in Africa to document that individuals working within e-waste sites and residents in nearby communities are exposed to a number of toxic-substances, some at potentially concerning levels.

Occupational health and safety, metal exposures and multi-exposures health risk in Canadian electronic waste recycling facilities

Electronic waste recycling (e-recycling) involves manual operations that expose workers to toxic metals. We aim to describe occupational health and safety practices and workers' exposures to metals in the Canadian formal e-recycling industry, and to estimate the health risk associated with multiple exposures. This cross-sectional study documented practices through observations and questionnaires, and assessed metal exposures using personal air samples and biomarkers. Health risks were estimated relative to recognised occupational exposure guidelines, and using an additive approach for consideration of multiple exposures. Six e-recycling and one commercial recycling facilities were investigated, and the metal exposures of 99 workers (23 women) were measured. In most facilities, dust control was inadequate and personal protective equipment was improperly worn. In e-recycling, lead was detected in all air samples and in most blood samples, up to 48 µg/m³ and 136 µg/l, respectively. Other quantified metals included beryllium, mercury, arsenic, barium, cadmium, chrome, cobalt, copper, indium, manganese, nickel and yttrium. When handling cathode ray tube screens, workers were 4.9 times and 8.5 times more likely to be exposed to lead and yttrium, respectively, than workers who were not assigned to a specific type of electronics. Overall, exposures were largely associated with facility size and airborne dust concentration. The additive hazard indices for airborne exposures raised concerns for kidney disorders, for peripheral and central nervous systems, and for the male reproductive system. Minimizing airborne dust through collective control methods and adequately using personal protection should reduce metal exposures and associated health risks in this growing industry.

A first comprehensive estimate of electronic waste in Canada

Detailed analysis of electronic waste (e-waste) generation and composition is of utmost importance for the proper management of growing e-waste stream worldwide, containing both hazardous and valuable materials. Considering the absence of such comprehensive and up-to-date studies in Canada, this work presents the first estimate of put-on-market electrical and electronic equipment (EEE), the in-use stocks of EEE and e-waste generation in Canada from 1971 to 2030 for 51 product categories comprising 198 product types. Using a dynamic material flow analysis (MFA), the put-on-market EEE is estimated based on trade data retrieved from national and international import and export statistics, and the in-use stocks of EEE and the resulting e-waste are calculated using the Weibull distribution function. The results show that the total mass of EEE within the 60-year period is estimated to be 42.3 million tonnes, with an annual average growth rate of approximately 0.5%. By 2030, the total accumulated in-use stock of EEE is estimated to exceed 13 million tonnes. The estimated e-waste over the 60-year timespan is 29.1 million tonnes. The total annual e-waste generation in Canada is calculated to be 252 kilo tonnes (kt) and 954 kt in the years 2000 and 2020 respectively, which is estimated to reach 1.2 million tonnes by 2030. The e-waste generation per capita increased from 8.3 kg in 2000 to 25.3 kg in 2020 and is estimated to reach 31.5 kg by 2030. This quantification provides valuable insights to policymakers for setting up targets for waste reduction and identifying the resource circularity potential for efficient management of e-waste.

The Minderoo-Monaco Commission on Plastics and Human Health

Background

Plastics have conveyed great benefits to humanity and made possible some of the most significant advances of modern civilization in fields as diverse as medicine, electronics, aerospace, construction, food packaging, and sports. It is now clear, however, that plastics are also responsible for significant harms to human health, the economy, and the earth's environment. These harms occur at every stage of the plastic life cycle, from extraction of the coal, oil, and gas that are its main feedstocks through to ultimate disposal into the environment. The extent of these harms not been systematically assessed, their magnitude not fully quantified, and their economic costs not comprehensively counted.

Goals

The goals of this Minderoo-Monaco Commission on Plastics and Human Health are to comprehensively examine plastics' impacts across their life cycle on: (1) human health and well-being; (2) the global environment, especially the ocean; (3) the economy; and (4) vulnerable populations-the poor, minorities, and the world's children. On the basis of this examination, the Commission offers science-based recommendations designed to support development of a Global Plastics Treaty, protect human health, and save lives.

Report Structure

This Commission report contains seven Sections. Following an Introduction, Section 2 presents a narrative review of the processes involved in plastic production, use, and disposal and notes the hazards to human health and the environment associated with each of these stages. Section 3 describes plastics' impacts on the ocean and notes the potential for plastic in the ocean to enter the marine food web and result in human exposure. Section 4 details plastics' impacts on human health. Section 5 presents a first-order estimate of plastics' health-related economic costs. Section 6 examines the intersection between plastic, social inequity, and environmental injustice. Section 7 presents the Commission's findings and recommendations.

Plastics

Plastics are complex, highly heterogeneous, synthetic chemical materials. Over 98% of plastics are produced from fossil carbon- coal, oil and gas. Plastics are comprised of a carbon-based polymer backbone and thousands of additional chemicals that are incorporated into polymers to convey specific properties such as color, flexibility, stability, water repellence, flame retardation, and ultraviolet resistance. Many of these added chemicals are highly toxic. They include carcinogens, neurotoxicants and endocrine disruptors such as phthalates, bisphenols, per- and poly-fluoroalkyl substances (PFAS), brominated flame retardants, and organophosphate flame retardants. They are integral components of plastic and are responsible for many of plastics' harms to human health and the environment.Global plastic production has increased almost exponentially since World War II, and in this time more than 8,300 megatons (Mt) of plastic have been manufactured. Annual production volume has grown from under 2 Mt in 1950 to 460 Mt in 2019, a 230-fold increase, and is on track to triple by 2060. More than half of all plastic ever made has been produced since 2002. Single-use plastics account for 35-40% of current plastic production and represent the most rapidly growing segment of plastic manufacture.Explosive recent growth in plastics production reflects a deliberate pivot by the integrated multinational fossil-carbon corporations that produce coal, oil and gas and that also manufacture plastics. These corporations are reducing their production of fossil fuels and increasing plastics manufacture. The two principal factors responsible for this pivot are decreasing global demand for carbon-based fuels due to increases in 'green' energy, and massive expansion of oil and gas production due to fracking.Plastic manufacture is energy-intensive and contributes significantly to climate change. At present, plastic production is responsible for an estimated 3.7% of global greenhouse gas emissions, more than the contribution of Brazil. This fraction is projected to increase to 4.5% by 2060 if current trends continue unchecked.

Plastic Life Cycle

The plastic life cycle has three phases: production, use, and disposal. In production, carbon feedstocks-coal, gas, and oil-are transformed through energy-intensive, catalytic processes into a vast array of products. Plastic use occurs in every aspect of modern life and results in widespread human exposure to the chemicals contained in plastic. Single-use plastics constitute the largest portion of current use, followed by synthetic fibers and construction.Plastic disposal is highly inefficient, with recovery and recycling rates below 10% globally. The result is that an estimated 22 Mt of plastic waste enters the environment each year, much of it single-use plastic and are added to the more than 6 gigatons of plastic waste that have accumulated since 1950. Strategies for disposal of plastic waste include controlled and uncontrolled landfilling, open burning, thermal conversion, and export. Vast quantities of plastic waste are exported each year from high-income to low-income countries, where it accumulates in landfills, pollutes air and water, degrades vital ecosystems, befouls beaches and estuaries, and harms human health-environmental injustice on a global scale. Plastic-laden e-waste is particularly problematic.

Environmental Findings

Plastics and plastic-associated chemicals are responsible for widespread pollution. They contaminate aquatic (marine and freshwater), terrestrial, and atmospheric environments globally. The ocean is the ultimate destination for much plastic, and plastics are found throughout the ocean, including coastal regions, the sea surface, the deep sea, and polar sea ice. Many plastics appear to resist breakdown in the ocean and could persist in the global environment for decades. Macro- and micro-plastic particles have been identified in hundreds of marine species in all major taxa, including species consumed by humans. Trophic transfer of microplastic particles and the chemicals within them has been demonstrated. Although microplastic particles themselves (>10 µm) appear not to undergo biomagnification, hydrophobic plastic-associated chemicals bioaccumulate in marine animals and biomagnify in marine food webs. The amounts and fates of smaller microplastic and nanoplastic particles (MNPs <10 µm) in aquatic environments are poorly understood, but the potential for harm is worrying given their mobility in biological systems. Adverse environmental impacts of plastic pollution occur at multiple levels from molecular and biochemical to population and ecosystem. MNP contamination of seafood results in direct, though not well quantified, human exposure to plastics and plastic-associated chemicals. Marine plastic pollution endangers the ocean ecosystems upon which all humanity depends for food, oxygen, livelihood, and well-being.

Human Health Findings

Coal miners, oil workers and gas field workers who extract fossil carbon feedstocks for plastic production suffer increased mortality from traumatic injury, coal workers' pneumoconiosis, silicosis, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer. Plastic production workers are at increased risk of leukemia, lymphoma, hepatic angiosarcoma, brain cancer, breast cancer, mesothelioma, neurotoxic injury, and decreased fertility. Workers producing plastic textiles die of bladder cancer, lung cancer, mesothelioma, and interstitial lung disease at increased rates. Plastic recycling workers have increased rates of cardiovascular disease, toxic metal poisoning, neuropathy, and lung cancer. Residents of "fenceline" communities adjacent to plastic production and waste disposal sites experience increased risks of premature birth, low birth weight, asthma, childhood leukemia, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer.During use and also in disposal, plastics release toxic chemicals including additives and residual monomers into the environment and into people. National biomonitoring surveys in the USA document population-wide exposures to these chemicals. Plastic additives disrupt endocrine function and increase risk for premature births, neurodevelopmental disorders, male reproductive birth defects, infertility, obesity, cardiovascular disease, renal disease, and cancers. Chemical-laden MNPs formed through the environmental degradation of plastic waste can enter living organisms, including humans. Emerging, albeit still incomplete evidence indicates that MNPs may cause toxicity due to their physical and toxicological effects as well as by acting as vectors that transport toxic chemicals and bacterial pathogens into tissues and cells.Infants in the womb and young children are two populations at particularly high risk of plastic-related health effects. Because of the exquisite sensitivity of early development to hazardous chemicals and children's unique patterns of exposure, plastic-associated exposures are linked to increased risks of prematurity, stillbirth, low birth weight, birth defects of the reproductive organs, neurodevelopmental impairment, impaired lung growth, and childhood cancer. Early-life exposures to plastic-associated chemicals also increase the risk of multiple non-communicable diseases later in life.

Economic Findings

Plastic's harms to human health result in significant economic costs. We estimate that in 2015 the health-related costs of plastic production exceeded $250 billion (2015 Int$) globally, and that in the USA alone the health costs of disease and disability caused by the plastic-associated chemicals PBDE, BPA and DEHP exceeded $920 billion (2015 Int$). Plastic production results in greenhouse gas (GHG) emissions equivalent to 1.96 gigatons of carbon dioxide (CO2e) annually. Using the US Environmental Protection Agency's (EPA) social cost of carbon metric, we estimate the annual costs of these GHG emissions to be $341 billion (2015 Int$).These costs, large as they are, almost certainly underestimate the full economic losses resulting from plastics' negative impacts on human health and the global environment. All of plastics' economic costs-and also its social costs-are externalized by the petrochemical and plastic manufacturing industry and are borne by citizens, taxpayers, and governments in countries around the world without compensation.

Social Justice Findings

The adverse effects of plastics and plastic pollution on human health, the economy and the environment are not evenly distributed. They disproportionately affect poor, disempowered, and marginalized populations such as workers, racial and ethnic minorities, "fenceline" communities, Indigenous groups, women, and children, all of whom had little to do with creating the current plastics crisis and lack the political influence or the resources to address it. Plastics' harmful impacts across its life cycle are most keenly felt in the Global South, in small island states, and in disenfranchised areas in the Global North. Social and environmental justice (SEJ) principles require reversal of these inequitable burdens to ensure that no group bears a disproportionate share of plastics' negative impacts and that those who benefit economically from plastic bear their fair share of its currently externalized costs.

Conclusions

It is now clear that current patterns of plastic production, use, and disposal are not sustainable and are responsible for significant harms to human health, the environment, and the economy as well as for deep societal injustices.The main driver of these worsening harms is an almost exponential and still accelerating increase in global plastic production. Plastics' harms are further magnified by low rates of recovery and recycling and by the long persistence of plastic waste in the environment.The thousands of chemicals in plastics-monomers, additives, processing agents, and non-intentionally added substances-include amongst their number known human carcinogens, endocrine disruptors, neurotoxicants, and persistent organic pollutants. These chemicals are responsible for many of plastics' known harms to human and planetary health. The chemicals leach out of plastics, enter the environment, cause pollution, and result in human exposure and disease. All efforts to reduce plastics' hazards must address the hazards of plastic-associated chemicals.

Recommendations

To protect human and planetary health, especially the health of vulnerable and at-risk populations, and put the world on track to end plastic pollution by 2040, this Commission supports urgent adoption by the world's nations of a strong and comprehensive Global Plastics Treaty in accord with the mandate set forth in the March 2022 resolution of the United Nations Environment Assembly (UNEA).International measures such as a Global Plastics Treaty are needed to curb plastic production and pollution, because the harms to human health and the environment caused by plastics, plastic-associated chemicals and plastic waste transcend national boundaries, are planetary in their scale, and have disproportionate impacts on the health and well-being of people in the world's poorest nations. Effective implementation of the Global Plastics Treaty will require that international action be coordinated and complemented by interventions at the national, regional, and local levels.This Commission urges that a cap on global plastic production with targets, timetables, and national contributions be a central provision of the Global Plastics Treaty. We recommend inclusion of the following additional provisions:The Treaty needs to extend beyond microplastics and marine litter to include all of the many thousands of chemicals incorporated into plastics.The Treaty needs to include a provision banning or severely restricting manufacture and use of unnecessary, avoidable, and problematic plastic items, especially single-use items such as manufactured plastic microbeads.The Treaty needs to include requirements on extended producer responsibility (EPR) that make fossil carbon producers, plastic producers, and the manufacturers of plastic products legally and financially responsible for the safety and end-of-life management of all the materials they produce and sell.The Treaty needs to mandate reductions in the chemical complexity of plastic products; health-protective standards for plastics and plastic additives; a requirement for use of sustainable non-toxic materials; full disclosure of all components; and traceability of components. International cooperation will be essential to implementing and enforcing these standards.The Treaty needs to include SEJ remedies at each stage of the plastic life cycle designed to fill gaps in community knowledge and advance both distributional and procedural equity.This Commission encourages inclusion in the Global Plastic Treaty of a provision calling for exploration of listing at least some plastic polymers as persistent organic pollutants (POPs) under the Stockholm Convention.This Commission encourages a strong interface between the Global Plastics Treaty and the Basel and London Conventions to enhance management of hazardous plastic waste and slow current massive exports of plastic waste into the world's least-developed countries.This Commission recommends the creation of a Permanent Science Policy Advisory Body to guide the Treaty's implementation. The main priorities of this Body would be to guide Member States and other stakeholders in evaluating which solutions are most effective in reducing plastic consumption, enhancing plastic waste recovery and recycling, and curbing the generation of plastic waste. This Body could also assess trade-offs among these solutions and evaluate safer alternatives to current plastics. It could monitor the transnational export of plastic waste. It could coordinate robust oceanic-, land-, and air-based MNP monitoring programs.This Commission recommends urgent investment by national governments in research into solutions to the global plastic crisis. This research will need to determine which solutions are most effective and cost-effective in the context of particular countries and assess the risks and benefits of proposed solutions. Oceanographic and environmental research is needed to better measure concentrations and impacts of plastics <10 µm and understand their distribution and fate in the global environment. Biomedical research is needed to elucidate the human health impacts of plastics, especially MNPs.

Summary

This Commission finds that plastics are both a boon to humanity and a stealth threat to human and planetary health. Plastics convey enormous benefits, but current linear patterns of plastic production, use, and disposal that pay little attention to sustainable design or safe materials and a near absence of recovery, reuse, and recycling are responsible for grave harms to health, widespread environmental damage, great economic costs, and deep societal injustices. These harms are rapidly worsening.While there remain gaps in knowledge about plastics' harms and uncertainties about their full magnitude, the evidence available today demonstrates unequivocally that these impacts are great and that they will increase in severity in the absence of urgent and effective intervention at global scale. Manufacture and use of essential plastics may continue. However, reckless increases in plastic production, and especially increases in the manufacture of an ever-increasing array of unnecessary single-use plastic products, need to be curbed.Global intervention against the plastic crisis is needed now because the costs of failure to act will be immense.

Extended producer responsibility's effect on producers' electronic waste management practices in Japan and Canada: drivers, barriers, and potential of the urban mine

Electronic waste is the fastest-growing domestic waste stream globally, continuously outstripping projections. With increasing ubiquity of complex computing, many non-renewables are contained in end-of-life electronics, creating a vast urban mine, potentially hazardous, depending on treatment. The aim of this study is to compare how Extended Producer Responsibility (EPR) policy is applied in two case countries, Japan and Canada, the practical implications of EPR policy design on producer operations, and how EPR affects electronic waste management improvements in each case. These cases share international obligations for electronic waste management but employ contrasting EPR policies. These policies are widespread in both cases, yet are not presided over by larger, regional obligations. Therefore, country-level interviews with electronic waste management stakeholders focusing on how EPR regulation affects producer practice were conducted. The physical application of EPR, as seen in Japan, drives design changes by producers intending to simplify downstream treatment, while financial responsibility in Canada, creates greater concern with cost-savings for producers, complicating end-of-life processing. EPR implementation, along with specific geographical factors, also create contrasting resource recovery results between countries. Regulation primarily drives EPR implementation in both countries, which is consistent with the literature. This study presents new drivers and barriers, namely pre-emptive legislation, and no incentive to improve, classifying the Japanese and Canadian systems as suffering from externalities on an insular system, and lack of harmonization, respectively. This research addresses a gap in comparative studies across regions of physical and financial EPR effects on producer practice.

Transboundary movement of waste review: From binary towards a contextual framing

Multiple cases of toxic waste dumping from the Organisation for Economic Co-operation and Development (OECD) countries to non-OECD countries in the 1980s led to scholarly attention to transboundary waste movements. The Basel Convention was established to provide an international legal framework to tackle such problems in the early 1990s, focusing on hazardous waste. However, the transboundary movement of all waste, not just hazardous waste, remains a societal challenge globally, frequently surfacing as an ethical question on the one hand and a story of resource management/trade on the other. This phenomenon has been studied across disciplines resulting in diverse, scattered and often contested understandings. Despite previous and ongoing efforts, waste production, management and transboundary movements are increasing and are predicted to grow significantly with global social, environmental and economic implications. This literature review uses a research synthesis and problematisation approach to critically analyse the transboundary waste literature since 1985. The findings highlight research trends, the need for data reliability and policy coherence, and the sustainability implications of the phenomenon. One recurring theme in the literature is the reduction of the complex phenomenon involving multiple countries, policies, actors and waste streams into simple opposite narratives, which we called transboundary waste binaries. We have identified and then challenged assumptions behind transboundary waste binaries and discussed the implications of such assumptions on the broader discourse. We have concluded with future research recommendations to look past the transboundary waste binaries towards a nuanced and contextual understanding of transboundary waste flows.

Silicone wristband- and handwipe-based assessment of exposure to flame retardants for informal electronic-waste and end-of-life-vehicle recycling workers and their children in Vietnam

Measuring personal exposure to flame retardants (FRs) is crucial for assessing and controlling human health risks posed by FRs during the recycling of electronic waste (e-waste) and end-of-life vehicles (ELVs). Here, we examined the use of handwipes and silicone wristbands to measure personal FR exposure for e-waste and ELV recycling workers and their children in Vietnam. On the handwipes from the e-waste recycling workers, the predominant five FRs detected were TBBPA (median concentration: 3700 ng/wipe), BDE-209 (1700 ng/wipe), TPHP (500 ng/wipe), DBDPE (410 ng/wipe), and BPA-BDPP (360 ng/wipe). On the handwipes from ELV recycling workers, TPHP (60 ng/wipe), IPPDPP (47 ng/wipe), BIPPPP/DIPPDPP (33 ng/wipe), BDE-209 (26 ng/wipe), and TCIPP (23 ng/wipe) were detected as the five predominant FRs. On the wristbands from the e-waste recycling workers, the five predominant FRs detected were TBBPA (median concentration: 340 ng/g), BDE-209 (330 ng/g), DBDPE (65 ng/g), TPHP (50 ng/g), and TMPP (34 ng/g). On the wristbands from the ELV recycling workers, TPHP (34 ng/g), IPPDPP (18 ng/g), TCIPP (14 ng/g), TDMPP (13 ng/g), BIPPPP/DIPPDPP (9.3 ng/g) and TMPP (9.3 ng/g) were detected as the predominant FRs. The data obtained with the wristbands were comparable to those obtained with the handwipes. Similar FR profiles were found in between the workers and their children. The profiles indicate that the informal e-waste and ELV recycling caused FR exposure not only for workers but also for their children who live in the workshops. By using the handwipe and wristband sampling approaches, we determined types and concentrations of FRs to which the workers and their children were dominantly exposed. Silicone wristband- and handwipe-based assessment is expected to be effective means of measuring personal FR exposure for the informal e-waste and ELV recycling workers and their children.

PFAS risk propagation terminology in spatial and temporal scales: Risk intensification, risk attenuation, and risk amplification

Poly- and per fluorinated alkyl substances (PFAS) are man-made chemicals that are used in many industrial applications to improve performance and durability of products. The CF bond is one of the strongest bonds in organic chemistry which makes PFAS highly persistent in the environment. Therefore, PFAS levels have increased in different environmental compartments (air, water, soil) at global scale over time since the early 1950s. Terminology used for describing potential risks and those used in risk communication can be confusing as different disciplines use risk concepts and vocabulary that are different from those used for exposure and/or health risk assessment for hazardous materials. For example, terms such as emergent risk, emerging risk, risk intensification, risk awareness, risk perception, risk attenuation, risk amplification, and risk absorption are often misused or misinterpreted, especially in describing and communicating risks associated with PFAS in the environment or PFAS exposure. In addition, appropriate risk terms associated with psychological, social, institutional, and cultural elements are often misused. Here, appropriate risk terminology for describing and quantifying risks and health risks in reference to PFAS exposure and PFAS related risk propagation in spatial and temporal scales are explained with examples.

PFAS use in electronic products and exposure risks during handling and processing of e-waste: A review

Poly- and perfluorinated alkyl substances (PFAS) have been and are used in electronic products due to their unique properties that improve product quality and performance. Ubiquities and persistence of some PFAS detected in environmental samples (water, soil, air) have attracted much attention and regulatory actions in recent years. This review provides an overview of PFAS use in electronic components; trends in quantities of e-waste generation; PFAS exposure pathways during e-waste handling and processing; reported PFAS in environmental samples and samples of serum, blood, and hair collected from people living near and working at e-waste processing sites. Processes used for manufacturing electronic components (e.g., embedded processes, additive manufacturing) make recycling or materials recovery from discarded electronic units and components very difficult and unfeasible. Exposure during numerous processing steps for materials recovery and scavenging at disposal sites can result in PFAS intake through inhalation, ingestion, and dermal routes. Chemical risk assessment approaches have been continuously evolving to consider chemical-specific dosimetric and mechanistic information. While the metabolic fate of PFAS is not well understood, some PFAS bioaccumulate and bind to proteins (but not to lipids) in biota and humans due to their surface-active characteristics and very low solubility in water and fat. It is difficult to associate the adverse health effects due to exposure to e-waste directly to PFAS as there are other factors that could contribute to the observed adverse effects. However, PFAS have been detected in the samples collected from different environmental compartments (e.g., water, soil, leachate, blood sera, rainwater) at and near e-waste processing sites, landfills, and near electronics and optoelectronics industries indicating that e-waste collection, processing, and disposal sites are potential PFAS exposure locations. Better monitoring of e-waste handling sites and detailed epidemiological studies for at risk populations are needed for assessing potential health risks due to PFAS exposure at these sites.

Pollution of heavy metal threat posed by e-waste burning and its assessment of human health risk

Improper treatment during recycling of e-waste materials by means of open burning is on the rise which has led to an increase in air pollution. This study looked at heavy metal concentrations, concentrations in relation to threshold values, and assessments of risk for noncarcinogenic and cancer risk threat. The Microwave Plasma-Atomic Emission Spectrometry (MP-AES 4210) series instrument of Agilent Technology, United States of America (USA), was used in analyzing heavy metal (Cd, Cu, and Pb) concentrations. The result of the analysis of the Kuka Bulukiya treatment point revealed that Pb has the highest mean concentration of 0.0693 ppm, Cu 0.0525 parts per million (PPM), and Cd 0.0042 ppm. The mean concentration at PRP Gidan Ruwa for Cd was found to be 0.0059 ppm, Cu 0.0363 ppm, and Pb 0.049 ppm. The result of the adult and children population calculated shows that the hazard quotient (HQ) and hazard index (HI) values are not up to 1 in all the pathways (inhalation, ingestion, and dermal) at both treatment points (1.2 ˟ 10^-4 and 9.8 ˟ 10^-5) and (6.4 ˟ 10^-4 and 5.9 ˟ 10^-4), respectively. The cancer risk for Kuka Bulukiya 6 ˟ 10^-10 and PRP G/Ruwa 5 ˟ 10^-10 for adults and 7 ˟ 10^-10 and 4 ˟ 10^-10 for children were both lower than the threshold set for cancer risk by the United States Environmental Protection Agency (USEPA). This meant that both adults and children were not at risk of cancer and noncarcinogenic threat based on the assessment in this study. The study concluded that informal e-waste burning has substantially helped in the relatively high levels of air pollution identified in the treatment points and in turn posed environmental and public health concerns to people around the area. This study recommends that samples of the vegetable products at the PRP G/Ruwa treatment point should be investigated immediately and adequate restrictions and regulations should be enacted and enforced in order to safeguard the environment and the populace. There is need for caution from the authorities to avert the possible implications (e-waste extractors and the public) of being affected with noncarcinogenic or carcinogenic ailments over time.

Managing strategies for mitigating interacting barriers to sustainable online e-waste collection platforms in India

Purpose

This study identifies barriers faced by online e-waste collection platforms in India and proposes a novel approach to manage strategies that contribute towards making such online platforms economically, socially, and environmentally sustainable by mitigating their interacting barriers.

Design/methodology/approach

The approach consists of a barrier assessment process and a strategy evaluation and planning process. The barrier assessment process uses multiple criteria decision making (MCDM) based method to evaluate the interactive effects of the barriers to derive their direct and indirect impacts on sustainability. The strategy evaluation and planning process evaluates the overall contribution value of strategies for mitigating interacting barriers and then categorizes them into planning zones based on their contribution and feasibility.

Findings

The interaction among the barriers is a significant component of the overall impact of the barriers on sustainability. The most impactful barriers are the lack of dissemination of information, lack of government support, insufficient infrastructure, and awareness and attitude of consumers. Lack of government support is the most influential causal barrier. Lack of information dissemination is a significant causal barrier with the highest overall impact on sustainability. Priority strategies that must be implemented to ensure sustainability include government support, offering higher prices or discounts for giving up e-waste, and increasing information dissemination.

Originality/value

Different from existing approaches for evaluating sustainability strategies, the strategies in this study are identified and evaluated based on their overall contribution towards mitigating interacting barriers to sustainability. The approach is applied in the Indian context to reveal the most influential barriers to the sustainability of online e-waste collection platforms and the most effective strategies for mitigating these barriers. The outcomes of this study contribute to strategy planning for sustainable online e-waste collection platforms in India.

Do the Main Developers of Electrical and Electronic Equipment Comply with the Precepts of the Circular Economy Concepts? A Patent-Based Approach

The unceasing demand for electronic equipment has led to numerous problems, such as environmental damage and raw material shortages. The adoption of circular production chains and the precepts of the circular economy when designing electronic equipment could minimize these problems by fostering the reuse of resources without loss of quality or value. The scientific literature has many studies on the importance of circular production, but there are no data to demonstrate whether the scientific information produced on the circular economy and circular production is being taken up by industry. This study analyzes whether patent applications for inventions applicable to the production of electronic equipment meet the precepts of the circular economy. To this end, a study of patent documents was conducted. A total of 3638 documents were retrieved. Their analysis revealed that the technologies developed by the leading patent applicants and manufacturers are mainly from the first link in the production chain, materials, and components. The solutions proposed tend to be geared toward equipment efficiency and reduced energy consumption, which may indirectly increase the equipment’s useful life and save energy. Despite the existence of laws and research highlighting the importance of feeding used materials back into the production process, the developers of electronic equipment have not yet turned their attention to the recycling and retrieval of materials for their use as inputs for new components.

A comprehensive review on hazardous aspects and management strategies of electronic waste: Bangladesh perspectives

Electronic waste (e-waste) contains a variety of electronic components e.g., metals, non-metals, plastics, cables, etc. The excessive generation of e-waste has become a significant concern in the last few decades. The current global e-waste generation is 57.4 million metric tons (MMT) per year. Asia produces the highest amount of e-waste (24.9 MMT) followed by America, Europe, Africa, and Oceania. In Bangladesh, e-waste produces from two sources: its own consumption of electronic devices, which is 0.6 MMT, and imported e-waste from ship breaking yards that is 2.5 MMT in 2021. However, inadequate information on the current state of e-waste generation and management systems in Bangladesh has created a void to establish the future direction for proper handling of e-waste. In this work, the Bangladesh perspective of e-waste has been analyzed. The environmental, health economical forfeiture of e-waste has been discussed. The development of government legislations regarding e-waste have been stated. The establishment of e-waste management has been designed by the life cycle assessment (LCA) and material flow analysis (MFA) models. Moreover, a holistic approach for understanding the possible hazards, the economic feasibility of e-waste processing and viable management models for e-waste in Bangladesh was endeavored in this work to propose systematic future directions and recommendations to improve the current e-waste scenario of Bangladesh.

A Review on Global Emissions by E-Products Based Waste: Technical Management for Reduced Effects and Achieving Sustainable Development Goals

In the 21st century, a great amount of electrical and electronic waste (e-waste) has accumulated, and the unregulated nature of its disposal and recycling represents a particular hazard in a global context. For the purposes of e-waste management, there must be more emphasis on the scientific processes for recycling, reusing and remanufacturing precious materials. Resource management is related to energy management; therefore, the harvesting of costly materials from e-waste is important for both energy management and sustainable development. At present, a lack of scientific recycling of a significant amount of e-waste is a source of environmental pollution and health hazards that are having a detrimental effect on sustainable development goals. It is necessary to find a process for recovering valuable materials from e-waste with the minimum possible environmental impact. At present, it is essential to modify the process of electrical and electronic products (e-products) becoming e-waste, and the subsequent process of e-waste recycling, in order to lessen the impact in terms of pollution. E-waste scientific recycling initiatives can reduce the environmental impact of the process, which in turn can support a shift from the current linear flow of costly materials to a more sustainable circular flow. Furthermore, internal consumption loss, emissions, and heating loss from e-products are the main factors contributing to the loss of energy efficiency in the process, which in turn contributes to environmental pollution. Promoting green innovation in the manufacturing process of e-products, as well as their reuse, can reduce the environmental impact of e-waste in near future. Both of these pathways are imperative for a less polluted, low-toxic environment and sustainable development. However, the sustainable development initiative of the United Nation Environmental Programme (UNEP) policy framework is the ultimate goal. This is expected to support the management of environmental pollution, maintaining it at an acceptable level, while also preventing hazardous risks to human health. Hence, this review examines the prospects for achievable environmental sustainability through technological developments.

Extending the Life Cycle of EEE—Findings from a Repair Study in Germany: Repair Challenges and Recommendations for Action

The increasing amount of waste from electrical and electronic equipment and the resulting environmental issues are challenging, since product life cycles are too short, and companies continue to rely on linear (business) models. The Circular Economy is an approach to meet these challenges by extending the product lifetime. One way to extend the product lifetime is to repair them. However, since there has been no detailed research on the repair sector yet, this article aims at conducting a repair study in Germany to understand the repair process and get insights into typical failure patterns. Therefore, we analyze the repair sector’s current barriers from different perspectives, especially of customers and businesses. We discuss the results of the repair study, where 382 repair attempts were conducted, with a total success rate of 55%. Moreover, the participants were interviewed to understand their barriers and motivation for repair. Based on the study’s interim findings, recommendations for action are given to make the repair services more attractive for the repairer and customer. Based on the findings, an interdisciplinary approach to improve repair processes by using a digital repair portal is derived.

Concentrations and Toxic Implications of Dioxin-Like Polychlorinated Biphenyls in Soil Samples from Electrical Power Stations in Lagos, Nigeria

Dioxin-like polychlorinated biphenyls (dl-PCBs) are ubiquitous chemicals which mediate toxicity in a way similar to polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans. In silico modeling was used to predict the absorption, distribution, metabolism, excretion, and toxicity (ADMET) properties of eight dioxin-like PCBs in soil samples of 12 power stations in Lagos, Nigeria. Concentrations of Σdl-PCB₈ in soil samples ranged from 490 to 61,000 pg g^-1 , with mean concentrations of 17,000 pg g^-1 . The corresponding toxic equivalent (TEQ) concentrations of Ʃdl-PCB₈ ranged from 0.01 to 450 pg TEQ g^-1 , with a mean value of 42 pg TEQ g^-1 . Mean TEQ concentrations for Ʃdl-PCB₈ in soil samples from all but one of the sites exceeded the Canadian guideline value of 4 pg TEQ g^-1 and the US and German guideline values of 5-10 pg TEQ g^-1 . However, the TEQ concentrations obtained were all below the US action level of 1000 pg TEQ g^-1 . The ADMET predictions revealed that all studied dl-PCBs are inhibitors of three major isoforms (1A2, 2C9, and 2C19) of cytochrome P450 enzyme. Acute oral toxicity (median lethal dose) predictions revealed that all target dl-PCBs were class III compounds. Hepatotoxicity and carcinogenicity were positive, signifying that the studied compounds all have a tendency to elicit these effects. Occupational daily TEQ exposure via soil ingestion was estimated for an average adult worker weighing 70 kg. The maximum exposure obtained was 0.14 pg TEQ kg^-1  body weight day^-1 , which is half of the European Food Safety Authority (EFSA) tolerable daily intake (TDI) for dioxin-like compounds. This raises concern over the possible exceedance of the EFSA TDI for these workers if other dietary and nondietary exposure pathways and dioxin-like compounds are considered. Environ Toxicol Chem 2022;41:800-809. © 2021 SETAC.

Toward the Circular Economy of Rare Earth Elements: A Review of Abundance, Extraction, Applications, and Environmental Impacts

Rare earth elements (REEs) are increasingly critical to the high-technology and low-carbon economy. With a shift to sustainable socioeconomic development that aims to be less fossil fuel dependent, global demand for REEs continues to rise, despite their uncertain supply chain and high environmental impact of production. Here, we review recent research on REEs, including global reserve assessment, REE-based applications, major REE production pathways, environmental impacts, and the potential to leverage circular economies within the REE industry. The main objective of this review is to provide an overall socioeconomic and environmental perspective of the REE industry with a central focus on environmental impacts of various REE-related activities. The literature reveals significant interest in extracting REEs from secondary materials (e.g., tailings, bauxite residues, coal combustion ash) and electronic wastes. However, some of these REE recovery processes are not yet economically profitable and environmental-friendly. Continued technological advancements and increasing demands for REEs may entice countries with recently discovered REE reserves to break the current monopolistic REE supply chain. Furthermore, the sustainability of REE usage may also depend on consumer awareness of environmental and human health impacts associated with end-of-life electronics that contain REEs. On the other hand, REEs may show promise in sustainable agriculture and environmental applications. Nevertheless, further research on REE ecotoxicological impacts is required to establish environmental regulations that protect the environment and human health.

Global DNA (LINE-1) methylation is associated with lead exposure and certain job tasks performed by electronic waste workers

OBJECTIVE

This study assessed the associations between blood and urine levels of toxic metals; cadmium (Cd) and lead (Pb), and methylation levels of the LINE-1 gene among e-waste and control populations in Ghana.

METHODS

The study enrolled 100 male e-waste workers and 51 all-male non-e-waste workers or controls. The concentrations of Cd and Pb were measured in blood and urine using inductively coupled plasma mass spectrometry, while LINE1 methylation levels were assessed by pyrosequencing of bisulfite-converted DNA extracted from whole blood. Single and multiple metals linear regression models were used to determine the associations between metals and LINE1 DNA methylation.

RESULTS

Blood lead (BPb) and urine lead (UPb) showed higher median concentrations among the e-waste workers than the controls (76.82 µg/L vs 40.25 µg/L, p ≤ 0.001; and 6.89 µg/L vs 3.43 µg/L, p ≤ 0.001, respectively), whereas blood cadmium (BCd) concentration was lower in the e-waste workers compared to the controls (0.59 µg/L vs 0.81 µg/L, respectively, p = 0.003). There was no significant difference in LINE1 methylation between the e-waste and controls (85.16 ± 1.32% vs 85.17 ± 1.11%, p = 0.950). In our single metal linear regression models, BPb was significantly inversely associated with LINE1 methylation in the control group (βBPb = - 0.027, 95% CI - 0.045, - 0.010, p = 0.003). In addition, a weak association between BPb and LINE1 was observed in the multiple metals analysis in the e-waste worker group (βBPb = - 0.005, 95% CI - 0.011, 0.000, p = 0.058).

CONCLUSION

Continuous Pb exposure may interfere with LINE1 methylation, leading to epigenetic alterations, thus serving as an early epigenetic marker for future adverse health outcomes.

Electronic Waste Low-Temperature Processing: An Alternative Thermochemical Pretreatment to Improve Component Separation

The production of electronic waste due to technological development, economic growth and increasing population has been rising fast, pushing for solutions before the environmental pressure achieves unprecedented levels. Recently, it was observed that many extractive metallurgy alternatives had been considered to recover value from this type of waste. Regarding pyrometallurgy, little is known about the low-temperature processing applied before fragmentation and subsequent component separation. Therefore, the present manuscript studies such alternative based on scanning electron microscopy characterization. The sample used in the study was supplied by a local recycling center in Rio de Janeiro, Brazil. The mass loss was constant at around 30% for temperatures higher than 300 °C. Based on this fact, the waste material was then submitted to low-temperature processing at 350 °C followed by attrition disassembling, size classification, and magnetic concentration steps. In the end, this first report of the project shows that 15% of the sample was recovered with metallic components with high economic value, such as Cu, Ni, and Au, indicating that such methods could be an interesting alternative to be explored in the future for the development of alternative electronic waste extraction routes.

Cheap and sensitive polymer/bismuth film modified electrode for simultaneous determination of Pb(II) and Cd(II) ions

Different aminonaphetalenesulphonic acid derivatives like 5-aminonaphthalene-1-sulphonic acid (5AN1SA), 2-aminonaphthalene-1-sulphonic acid (2AN1SA), 8-aminonaphthalene-2-sulphonic acid (8AN2SA) and 4-amino-3-hydroxynaphthalene-1-sulphonic acid (4A3HN1SA) were used to construct polymer/bismuth film modified electrode for simultaneous determination of Pb(II) and Cd(II) ions with the aim of developing a cheaper and sensitive electrode that could possibly replace Nafion. Among the different modified electrodes, poly (8AN2SA)/bismuth film modified electrodes showed the highest electrochemical response for both ions. These electrochemical results were also supported by density functional theory (DFT) calculations. Based on these experimental and theoretical results, poly (8AN2SA)/bismuth film glassy carbon modified electrode was further investigated to develop a simple and sensitive electrochemical method for the simultaneous determination of Pb(II) and Cd(II) ions. After optimizing the different experimental parameters, the proposed method gave a linear range of 1-40 μg/L with the detection limit of 0.38 and 0.08 μg/L for the simultaneous determination of Pb(II) and Cd(II) ions, respectively.

Life Cycle Assessment and Material Flow Analysis: Two Under-Utilized Tools for Informing E-Waste Management

The unprecedented technological development and economic growth over the past two decades has resulted in streams of rapidly growing electronic waste (e-waste) around the world. As the potential source of secondary raw materials including precious and critical materials, e-waste has recently gained significant attention across the board, ranging from governments and industry, to academia and civil society organizations. This paper aims to provide a comprehensive review of the last decade of e-waste literature followed by an in-depth analysis of the application of material flow analysis (MFA) and life cycle assessment (LCA), i.e., two less commonly used strategic tools to guide the relevant stakeholders in efficient management of e-waste. Through a keyword search on two main online search databases, Scopus and Web of Science, 1835 peer-reviewed publications were selected and subjected to a bibliographic network analysis to identify and visualize major research themes across the selected literature. The selected 1835 studies were classified into ten different categories based on research area, such as environmental and human health impacts, recycling and recovery technologies, associated social aspects, etc. With this selected literature in mind, the review process revealed the two least explored research areas over the past decade: MFA and LCA with 33 and 31 studies, respectively. A further in-depth analysis was conducted for these two areas regarding their application to various systems with numerous scopes and different stages of e-waste life cycle. The study provides a detailed discussion regarding their applicability, and highlights challenges and opportunities for further research.

Bio-inspired gelatin/single-walled carbon nanotube nanocomposite for transient electrochemical energy storage: An approach towards eco-friendly and sustainable energy system

Wide-scale production of non-biodegradable e-waste from electrical appliances are causing great harm to the environment. The use of bio-polymer based nanomaterials may offer a promising approach for the fabrication of eco-friendly sustainable devices. In this work, gelatin/single walled carbon nanotube (Gel/SWCNT) nanocomposites were prepared by a simple and economic aqueous casting method. The effect of SWCNT on the structural, surface-morphological, electrical, and electrochemical properties of the nanocomposite was studied. Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscope (FESEM) showed an improved degree of interaction between the SWCNTs and Gel matrix. The surface wettability of the nanocomposites was found to be changed from hydrophilic to hydrophobic in nature due to the incorporation of SWCNTs into the Gel matrix. The incorporation of SWCNTs was also found to reduce the DC resistivity of the nanocomposite by 4 orders of magnitude. SWCNTs also increase the specific capacitance of the nanocomposite from 124 mF/g to 467 mF/g at a current density of 0.3 mA/g. The electrochemical impedance spectroscopy analysis revealed an increase of the pseudo-capacitance increased from 9.4 μF to 31 μF due to the incorporation of SWCNT. The Gel/SWCNT nanocomposite showed cyclic stability with capacitive retention of about 98% of its initial capacitance after completing 2000 charging/discharging cycles at a current density of 100 mA/g. The nanocomposite completely dissolves in water within 12 h, demonstrates it as a promising candidate for transient energy storage applications. The Gel/SWCNT nanocomposite may offer a new route for the synthesis of eco-friendly, biodegradable, and transient devices.

Using Polychlorinated Naphthalene Concentrations in the Soil from a Southeast China E-Waste Recycling Area in a Novel Screening-Level Multipathway Human Cancer Risk Assessment

Polychlorinated naphthalene (PCN) concentrations in the soil at an e-waste recycling area in Guiyu, China, were measured and the associated human cancer risk due to e-waste-related exposures was investigated. We quantified PCNs in the agricultural soil and used these concentrations with predictive equations to calculate theoretical concentrations in outdoor air. We then calculated theoretical concentrations in indoor air using an attenuation factor and in the local diet using previously published models for contaminant uptake in plants and fruits. Potential human cancer risks of PCNs were assessed for multiple exposure pathways, including soil ingestion, inhalation, dermal contact, and dietary ingestion. Our calculations indicated that local residents had a high cancer risk from exposure to PCNs and that the diet was the primary pathway of PCN exposure, followed by dermal contact as the secondary pathway. We next repeated the risk assessment using concentrations for other carcinogenic contaminants reported in the literature at the same site. We found that polychlorinated dibenzodioxins and dibenzofurans (PCDD/Fs) and PCNs caused the highest potential cancer risks to the residents, followed by polychlorinated biphenyls (PCBs). The relative importance of different exposure pathways depended on the physicochemical properties of specific chemicals.

Worker health in formal electronic waste recycling plants

Purpose

This article explores the protective measures and the occupational health and safety (OHS) prevention strategies in place in the formal electronic equipment recycling (e-recycling) industry, more specifically in the Greater Montreal area (Quebec, Canada) and their consequences: health inequalities and level of compliance with environmental standards.

Design/methodology/approach

Semi-structured interviews were conducted using two respondent-specific questionnaires, one for workers and one for supervisors. Data collection and analytic procedures drew from qualitative content analysis. It was tempted to identify differences in OHS practices in relation to the workers' employment status and to link the companies' OHS concerns to their level of compliance with environmental standards.

Findings

The article highlights specific OHS issues in the formal e-recycling industry. Enforcing compliance with environmental standards as a lever for promoting OHS appears to be a promising strategy. Another main finding was the workforce diversity and related OHS vulnerabilities in this industry and the challenges they pose to employers' ability to adequately and equally reach and protect all workers involved.

Originality/value

To date, too little attention appears to have been paid to working conditions and worker protection in this rapidly growing sector. Specific prevention programmes could be implemented and adapted to the industry's diverse workforce and its multiple OHS vulnerabilities. This issue calls for the international community to take responsibility, as many electronic waste (e-waste) generated worldwide is shipped to developing countries, where lack of regulation and control is much more striking in a sector that remains very largely informal.

Work-Related Exposures and Musculoskeletal Disorder Symptoms among Informal E-Waste Recyclers at Agbogbloshie, Ghana

Recycling of electrical and electronic waste (e-waste) in developing countries is mostly conducted in the informal sector consisting of low skilled workers. Informal e-waste recycling predominantly involves the physically demanding work of manually collecting, dismantling and burning of e-waste items to extract reusable components and valuable metals including gold or copper. This cross-sectional study investigated the effects of manual e-waste recycling work on the musculoskeletal health of 176 workers at Agbogbloshie in Accra, Ghana - the largest informal e-waste dumpsites in Africa. Findings indicate significant associations between prolonged walking and weighted MSD symptom scores for the lower extremities, and between manual material handlings tasks and weighted MSD symptom scores for the upper extremities and lower back. The study calls attention to the need for ergonomics research in the informal work sector to promote safer practices and address a range of worker health concerns.

Opportunities and challenges in reducing personal inhalation exposure to air pollution among electronic waste recovery workers in Ghana

BACKGROUND

Informal sector electronic waste (e-waste) recovery produces toxic emissions resulting from burning e-waste to recover valuable metals.

OBJECTIVES

To identify high-risk worker groups by measuring relative levels of personal inhalation exposure to particulate matter (PM) of fine (≤2.5 µm) and coarse (2.5-10 µm) fractions (PM2.5 and PM2.5-10, respectively) across work activities among e-waste workers, and to assess how wind conditions modify levels of PM by activity and site location.

METHODS

At the Agbogbloshie e-waste site, 170 partial-shift PM samples and time-activity data were collected from participants (N = 105) enrolled in the GeoHealth cohort study. Personal sampling included continuous measures of size-specific PM from the worker's breathing zone and time-activity derived from wearable cameras. Linear mixed models were used to estimate changes in personal PM2.5 and PM2.5-10 associated with activities and evaluate effect modification by wind conditions.

RESULTS

Mean (±standard deviation) personal PM2.5 and PM2.5-10 concentrations were 80 (±  81) and 123 (± 139) µg m-3 , respectively. The adjusted mean PM2.5 concentration for burning e-waste was 88 µg m-3 , a 28% increase above concentrations during non-recovery activities (such as eating). Transportation-related and burning activities were associated with the highest PM2.5-10 concentrations. Frequent changes in wind direction were associated with higher PM2.5 concentrations when burning, and high wind speeds with higher PM2.5-10 concentrations when dismantling e-waste downwind of the burning zone.

Electronic recycling plants: human resources and OHS management case studies

Purpose

The electrical and electronic recycling industry is experiencing significant growth while paying no particular attention to the health and safety of recycling workers. Who are these recycling workers? How are they recruited and trained in OHS measures? This article will attempt to answer these questions.

Design/methodology/approach

As part of a toxicological study carried out on five companies, samples were taken from employees (n = 100) and their working environment. Among them, 26 workers and six managers also participated in interviews on the management of OHS preventive practices. This article presents analyses of the recruitment strategies for these workers and the management of preventive measures.

Findings

The main findings were that preventive practices vary according to the company's social mission and recruitment strategy. OHS preventive practices vary among the companies, even though the workers are similarly exposed to multiple contaminants. Precarious employment relationships put these workers in a vulnerable position.

Originality/value

Although recycling electrical and electronic equipment (e-recycling) has been an ecological and moral concern in Western societies for several decades, occupational health and safety (OHS) management in recycling plants has received little attention.

A PRELIMINARY ASSESSMENT OF PHYSICAL WORK EXPOSURES AMONG ELECTRONIC WASTE WORKERS AT AGBOGBLOSHIE, ACCRA GHANA

Occupational exposure associated with unstructured, informal e-waste recycling has received very limited attention. This study aimed to quantify the occupational physical exposures among informal e-waste workers at the largest e-waste site in Africa. A cross-sectional field survey of 163 male e-waste workers was conducted using a self-report occupational physical activity questionnaire, along with direct work observations, and pedometer estimates of walking activity for a subset of workers (n = 42). Results indicated significant differences in self-reported 7-day work exposures among the three main e-waste job categories, namely, collectors (n = 70), dismantlers (n = 73) and burners (n = 20). Prolonged walking, sitting and standing on five or more days in the workweek was frequently reported by collectors (87%), dismantlers (82%) and burners (60%), respectively. Nearly 90% of collectors and burners and 60% of dismantlers reported lifting and carrying on five or more days in the workweek. The exposure combinations identified suggest a risk for musculoskeletal disorders (MSDs). Findings call attention to the need for research examining potential associations between physical exposures and MSDs affecting e-waste workers in Agbogbloshie. The high exposure variability both between and within workers has implications for future exposure assessments conducted in unregulated, informal work settings.

Dioxins in breast milk of Chinese mothers: A survey 40 years after the e-waste recycling activities

In the past two decades, numerous studies on dioxin concentrations in breast milk have been conducted in China. However, information concerning dioxin concentrations in breast milk from women living in e-waste recycling sites remains limited. Thus, this study aimed to evaluate health risk owing dioxin intake in e-waste recycling areas in China. In 2015, 42 mothers were recruited from an e-waste recycling site, and the same number of mothers were recruited from a reference site. We collected 10-mL breast milk samples from each participant. Breast milk concentrations of polychlorinated dibenzo-p-dioxins (PCDDs)/polychlorinated dibenzofurans (PCDFs) were significantly higher in the exposed group than in the reference group. The total toxic equivalents (TEQ) of PCDDs/DFs were 9.68 pg/g lipid in the exposed group, a value two times higher than those in the reference group (4.18 pg/g lipid). The estimated daily intake (EDI) of PCDD/DFs was calculated to assess the risk of dioxins through breastfeeding. The infant EDI level was two times higher in the exposed group (54.21 pg TEQ/kg body wt/day) than in the reference group (23.41 pg TEQ/kg body wt/day). Our findings suggest that mothers and their breastfeeding infants living in an e-waste recycling site were exposed to higher dioxin concentrations than those living in a reference site.

Musculoskeletal Disorder Symptoms among Workers at an Informal Electronic-Waste Recycling Site in Agbogbloshie, Ghana

Informal recycling of electrical and electronic waste (e-waste) has myriad environmental and occupational health consequences, though information about the chronic musculoskeletal health effects on workers is limited. The aim of this study was to examine the prevalence and intensity of self-reported musculoskeletal disorder (MSD) symptoms among e-waste workers at Agbogbloshie in Ghana-the largest informal e-waste dumpsite in West Africa-relative to workers not engaged in e-waste recycling. A standardized musculoskeletal discomfort questionnaire was administered to 176 e-waste workers (73 collectors, 82 dismantlers, and 21 burners) and 41 workers in a reference group. The number of body parts with musculoskeletal discomfort were 1.62 and 1.39 times higher for collectors and dismantlers than burners, respectively. A 1-week discomfort prevalence was highest for collectors (91.8%) followed by dismantlers (89%), burners (81%), and the reference group (70.7%). The discomfort prevalence for e-waste workers was highest in the lower back (65.9%), shoulders (37.5%), and knees (37.5%). Whole-body pain scores (mean ± SE) were higher for collectors (83.7 ± 10.6) than dismantlers (45.5 ± 7.6), burners (34.0 ± 9.1), and the reference group (26.4 ± 5.9). Differences in prevalence, location, and intensity of MSD symptoms by the e-waste job category suggest specific work-related morbidity. Symptom prevalence and intensity call attention to the high risk for MSDs and work disability among informal e-waste workers, particularly collectors and dismantlers.

Human exposure to halogenated and organophosphate flame retardants through informal e-waste handling activities - A critical review

Informal electrical and electronic waste (e-waste) handling activities constitute a potentially important source of halogenated (HFRs) and organophosphate flame retardants (OPFRs) to the environment and humans. In this review, two electronic databases (ScienceDirect and Web of Science Core Collection) were searched for papers that addressed this topic. A total of 82 relevant studies (including 72 studies selected from the two databases and 10 studies located from the references of the first 72 selected studies) were identified that reported on human external and internal exposure to HFRs and OPFRs arising as a result of informal e-waste handling activities. Compared to the general population, higher levels of external exposure (i.e., inhalation, ingestion, and dermal absorption) and internal exposure (i.e., blood serum, hair, breast milk, urine, and other human matrices) to HFRs and OPFRs were identified for e-waste recyclers and residents inhabiting e-waste dismantling and recycling zones, especially for younger adults and children. Food intake and dust ingestion were the dominant exposure pathways for the majority of brominated flame retardants (BFRs) and dechlorane plus (DP); while inhalation was identified as the most significant pathway of human exposure to OPFRs in informal e-waste sites. The majority of research to date has focused on China and thus future studies should be conducted in other regions such as Africa and South Asia. Other suggested foci of future research are: examination of exposure via dermal contact with e-waste, dietary exposure of local populations to OPFRs, confirmation of the existence of and cause(s) of the higher body burdens of females compared with males amongst populations impacted by informal e-waste handling, and characterisation of exposure of such populations to chlorinated paraffins.