Redox-responsive carboxymethyl cellulose hydrogel for adsorption and controlled release of dye

Carboxymethyl cellulose sodium modified poly(acrylic acid) and organic montmorillonite nanocomposite hydrogels with excellent purification ability for cationic dye wastewater

Poly(acrylic acid) (PAA) based hydrogels have attracted substantial attention in water treatment due to their adsorption character, but their loose internal structure and lack of adsorption sites limit their application. Organic montmorillonite (OMMT) has a high specific surface area, but its dispersion is inadequate, making it difficult to apply in composite materials. Therefore, this study uses sodium carboxymethyl cellulose (CMCNa) as a modifier to improve the dispersion of OMMT in the hydrogel system, thereby enhancing the adsorption performance of the nanocomposite hydrogels. The electrostatic effect between CMC-Na/OMMT and the increased viscosity promoted the stable dispersion of OMMT in the PAA/CMC-Na/OMMT (ACM) hydrogels. The synergistic effect of CMC-Na and OMMT and the formation of hydrogen bonding physical interactions between CMC-Na and PAA changed the structure, hydrophilicity, and electrical properties of the ACM nanocomposite hydrogels, which achieved their excellent pore structure, swelling rate, and adsorption capacity for various cationic dyes. The maximum adsorption of methylene blue (MB) reached 361.4 mg·g-1 when the initial concentration of the cationic dye in the water was 100 mg·L-1. In addition, this study examined the adsorption kinetics and adsorption pattern of the hydrogel. The results were more consistent with the first-order kinetic curve and Freundlich adsorption isotherm, which indicated that the cationic dyes were absorbed into the hydrogel via multilayer physical adsorption. This research provided a simple and feasible strategy for the purification of cationic dye wastewater with ACM nanocomposite hydrogel as an adsorbent.

Development of a Novel Nanoclay-Doped Hydrogel Adsorbent for Efficient Removal of Heavy Metal Ions and Organic Dyes from Wastewater

Rapid industrialization has led to significant environmental challenges, particularly in wastewater treatment, where the removal of heavy metal ions and organic dyes is critical. This study presents the synthesis and characterization of a high-performance hydrogel adsorbent, (nanoclay)x@poly-γ-glutamic acid (γ-PGA)/polyethyleneimine (PEI) hydrogel adsorbent (denoted as NxPP, x = 0, 20, 40, 60, and 80), for the efficient removal of heavy metal ions (Cu2+, Fe3+, and Zn2+) and organic dyes (Methylene blue, as a typical example) from wastewater. The hydrogel was prepared using a one-pot method, combining γ-PGA and PEI with varying amounts of nanoclay. The N80PP hydrogel demonstrated exceptional adsorption capacities, achieving 224.37 mg/g for Cu2+, 236.60 mg/g for Fe3+, and 151.95 mg/g for Zn2+ within 30 min, along with 88.18 mg/g for Methylene blue within 5 h. The incorporation of nanoclay significantly enhanced the mechanical properties, with compressive strength reaching 560.49 kPa. The hydrogel exhibited excellent reusability, maintaining high adsorption capacity after five cycles. The adsorption kinetics followed a pseudo-second-order model, and the isotherms fit the Freundlich model, indicating a multilayer adsorption mechanism. This study highlights the potential of NxPP hydrogels as a versatile and sustainable solution for wastewater treatment.

Perfluoroalkylated benzoic acid-based phase-selective supramolecular self-assembly system for dye removal

In this study, perfluoroalkylated derivatives of benzoic acid S-6 and O-6 were designed and synthesized as supramolecular gelators using a simple one-step method. Both S-6 and O-6 could form gels in various organic solvents. Notably, these compounds have potential applications in environmental remediation, with S-6 demonstrating significant promise for oil spill treatment. After five recycling cycles, the recovery rate of the gelation capacity for diesel oil remained above 90%. Xerogels derived from O-6 at a concentration of 5 wt% in pump oil effectively adsorbed Rhodamine B (RhB). The adsorption process primarily involved chemical adsorption, electrostatic interactions between the O-6 xerogel and the cationic RhB dye, as well as physical adsorption within the xerogel's pores. In summary, benzoic acid derivatives represent a kind of multifunctional, recyclable, and efficient materials.

Recent advancements and perspectives on processable natural biopolymers: Cellulose, chitosan, eggshell membrane, and silk fibroin

With the rapid development of the global economy and the continuous consumption of fossil resources, sustainable and biodegradable natural biomass has garnered extensive attention as a promising substitute for synthetic polymers. Due to their hierarchical and nanoscale structures, natural biopolymers exhibit remarkable mechanical properties, along with excellent innate biocompatibility and biodegradability, demonstrating significant potential in various application scenarios. Among these biopolymers, proteins and polysaccharides are the most commonly studied due to their low cost, abundance, and ease of use. However, the direct processing/conversion of proteins and polysaccharides into their final products has been a long-standing challenge due to their natural morphology and compositions. In this review, we emphasize the importance of processing natural biopolymers into high-value-added products through sustainable and cost-effective methods. We begin with the extraction of four types of natural biopolymers: cellulose, chitosan, eggshell membrane, and silk fibroin. The processing and post-functionalization strategies for these natural biopolymers are then highlighted. Alongside their unique structures, the versatile potential applications of these processable natural biopolymers in biomedical engineering, biosensors, environmental engineering, and energy applications are illustrated. Finally, we provide a summary and future outlook on processable natural biopolymers, underscoring the significance of converting natural biopolymers into valuable biomaterial platforms.

Unripe Plantain Peel Biohydrogel for Methylene Blue Removal from Aqueous Solution

Dye contamination is a serious environmental issue, particularly affecting water bodies, driving efforts to synthesize adsorbent materials with high dye-removal capacities. In this context, eco-friendly and cost-effective materials derived from bioresidues are being explored to recycle and valorize waste. This study investigates the synthesis, characterization, and application of a biohydrogel made from unripe plantain peel (PP), modified with carboxymethyl groups and crosslinked using varying concentrations of citric acid (CA), an eco-friendly and economical organic acid. The materials were characterized by ATR-FTIR, TGA, and SEM, confirming the successful synthesis of hydrogels, which exhibited rough, irregular surfaces with micropores. Additionally, the materials were analyzed for their pH point of zero charge, swelling capacity, and methylene blue (MB) dye removal efficiency. The results indicate that the biohydrogel formed with 1% CA exhibited the most favorable characteristics for MB removal. Kinetic studies revealed that the adsorption mechanism is pH-dependent, with equilibrium being reached in 720 min. The Freundlich isotherm model provided the best fit for the adsorption data, suggesting a heterogeneous surface and a multilayer adsorption process, with a maximum retention capacity of 600.8 ± 2.1 mg/g at pH 4. These findings contribute to the development of cost-effective and efficient materials for dye removal, particularly from water bodies.

Facile preparation of interpenetrating network hydrogel adsorbent from starch- chitosan for effective removal of methylene blue in water

Hydrogels based on biopolymers have attracted considerable interest in the last decades. Herein, an interpenetrating network hydrogel (IPN-Gel) adsorbent from starch-chitosan was fabricated facilely in one-pot through tandem Schiff base reaction and photopolymerization. First, aldehyde starch (DAS) was synthesized by the reaction of soluble starch with sodium periodate. Afterward, acrylamide (AM), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), polyethylene glycol dimethacrylate (PEGDMA), photoinitiator, chitosan and DAS were dissolved in water to obtain a clear solution. Schiff base reaction between chitosan and DAS took place quickly to form the first network, and then photopolymerization of AM, AMPS, and PEGDMA occurred under ultraviolet radiation to form the second network. The preparation conditions of the as-prepared IPN-Gel were optimized with two indexes of gel mass fraction and swelling ratio. Its swelling behavior with pH and temperature change was explored. Finally, its adsorption performance was characterized with methylene blue (MB) as a model contaminant. The maximum adsorption capacity of IPN-Gel can reach 2039 mg·g-1 at pH =10. Its adsorption performance accords with Langmuir isothermal model and pseudo-second-order kinetic model and it was mainly controlled by chemisorption. This strategy is expected to found broad application prospects in the preparation of hydrogel adsorbents.

Application of Anionic Hydrogels from Date Palm Waste for Dye Adsorption in Wastewater Treatment

This work aimed to develop an anionic cellulose nanofiber (CNF) bio-adsorbent from date palm tree waste and to investigate its removal efficiency compared to cationic methylene blue dye from contaminated water. Date palm pulp was first prepared from date palm leaves through acid hydrolysis using H2SO4, followed by hydrolysis in a basic medium using KOH, in which the process completely removed the components of hemicellulose, lignin, and silica. To obtain anionic CNF, the resulting pulp was further treated with H2SO4, followed by centrifugation. Biogel formation of the CNF suspension was promoted by sonication, where its removal efficiency of methylene blue dye was studied as a function of dye concentration, temperature, contact time, and pH value. In this work, we investigated two isotherms, i.e., Langmuir and Freundlich. The Langmuir model's consistency with the experimental data suggests that the adsorption of methylene blue dye onto CNF is monolayer and surface-limited. The reported maximum removal efficiency of 5 mg/g at 60 °C indicates the optimal temperature for adsorption in this specific case. Additionally, a pseudo-second-order model and Elovich model were also utilized to obtain a better understanding of the adsorption mechanism, in which we found not just physical adsorption but also an indication of a chemical reaction occurring between methylene blue dye and CNF. According to the results, that pseudo-second-order model's consistency with the experimental data suggests that the adsorption of methylene blue (MB) onto CNF is rate-limiting step involving chemisorption between the two. The study reveals that CNF adsorbents derived from renewable natural waste sources such as date palm leaves can be effective in removing cationic contaminants such as methylene blue dye.

Functional Bio-Based Polymeric Hydrogels for Wastewater Treatment: From Remediation to Sensing Applications

In recent years, many researchers have focused on designing hydrogels with specific functional groups that exhibit high affinity for various contaminants, such as heavy metals, organic pollutants, pathogens, or nutrients, or environmental parameters. Novel approaches, including cross-linking strategies and the use of nanomaterials, have been employed to enhance the structural integrity and performance of the desired hydrogels. The evolution of these hydrogels is further highlighted, with an emphasis on fine-tuning features, including water absorption capacity, environmental pollutant/factor sensing and selectivity, and recyclability. Furthermore, this review investigates the emerging topic of stimuli-responsive smart hydrogels, underscoring their potential in both sorption and detection of water pollutants. By critically assessing a wide range of studies, this review not only synthesizes existing knowledge, but also identifies advantages and limitations, and describes future research directions in the field of chemically engineered hydrogels for water purification and monitoring with a low environmental impact as an important resource for chemists and multidisciplinary researchers, leading to improvements in sustainable water management technology.

Tominaga T, Moretti Bonadio TG, P. da Silveira N, C. Leite D. A Study on the Behavior of Smart Starch-co-poly(N-isopropylacrylamide) Hybrid Microgels for Encapsulation of Methylene Blue

Hybrid microgels made from starch nanoparticles (SNPs) and poly(N-isopropylacrylamide) p(NIPAM) were used as promising hosts for the methylene blue (MB) dye. In this paper, these thermoresponsive microgels were characterized by dynamic light scattering (DLS), zeta potential measurements (ZP), and scanning electron microscopy (SEM) and evaluated as carriers for skin-targeted drug delivery. The hybrid microgel-MB systems in PBS solution were also studied by UV-vis spectroscopy and DLS, revealing discernible differences in spectral intensity and absorption shifts compared to microgels devoid of MB. This underscores the successful integration of methylene blue within the SNPs-co-p(NIPAM) microgels, signifying their potential as efficacious drug delivery vehicles.

Fabrication of cellulose nanocrystals/carboxymethyl cellulose/zeolite membranes for methylene blue dye removal: understanding factors, adsorption kinetics, and thermodynamic isotherms

This study introduces environmentally-friendly nanocellulose-based membranes for AZO dye (methylene blue, MB) removal from wastewater. These membranes, made of cellulose nanocrystals (CNCs), carboxymethyl cellulose (CMC), zeolite, and citric acid, aim to offer eco-friendly water treatment solutions. CNCs, obtained from sugarcane bagasse, act as the foundational material for the membranes. The study aims to investigate both the composition of the membranes (CMC/CNC/zeolite/citric acid) and the critical adsorption factors (initial MB concentration, contact time, temperature, and pH) that impact the removal of the dye. After systematic experimentation, the optimal membrane composition is identified as 60% CNC, 15% CMC, 20% zeolites, and 5% citric acid. This composition achieved a 79.9% dye removal efficiency and a 38.3 mg/g adsorption capacity at pH 7. The optimized membrane exhibited enhanced MB dye removal under specific conditions, including a 50 mg adsorbent mass, 50 ppm dye concentration, 50 mL solution volume, 120-min contact time, and a temperature of 25°C. Increasing pH from neutral to alkaline enhances MB dye removal efficiency from 79.9% to 94.5%, with the adsorption capacity rising from 38.3 mg/g to 76.5 mg/g. The study extended to study the MB adsorption mechanisms, revealing the chemisorption of MB dye with pseudo-second-order kinetics. Chemical thermodynamic experiments determine the Freundlich isotherm as the apt model for MB dye adsorption on the membrane surface. In conclusion, this study successfully develops nanocellulose-based membranes for efficient AZO dye removal, contributing to sustainable water treatment technologies and environmental preservation efforts.

Recent advances in cellulose- and alginate-based hydrogels for water and wastewater treatment: A review

From the environmental perspective, it is essential to develop cheap, eco-friendly, and highly efficient materials for water and wastewater treatment. In this regard, hydrogels and hydrogel-based composites have been widely employed to mitigate global water pollution as this methodology is simple and free from harmful by-products. Notably, alginate and cellulose, which are natural carbohydrate polymers, have gained great attention for their availability, price competitiveness, excellent biodegradability, biocompatibility, hydrophilicity, and superior physicochemical performance in water treatment. This review outlined the recent progress in developing and applying alginate- and cellulose-based hydrogels to remove various pollutants such as dyes, heavy metals, oils, pharmaceutical contaminants, and pesticides from wastewater streams. This review also highlighted the effects of various physical or chemical methods, such as crosslinking, grafting, the addition of fillers, nanoparticle incorporation, and polymer blending, on the physiochemical and adsorption properties of hydrogels. In addition, this review covered the alginate- and cellulose-based hydrogels' current limitations such as low mechanical performance and poor stability, while presenting strategies to improve the drawbacks of the hydrogels. Lastly, we discussed the prospects and future directions of alginate- and cellulose-based hydrogels. We hope this review provides valuable insights into the efficient preparations and applications of hydrogels.

Thermal, morphology and bacterial analysis of pH-responsive sodium carboxyl methylcellulose/ fumaric acid/ acrylamide nanocomposite hydrogels: Synthesis and characterization

In this present investigation, sodium carboxymethyl cellulose grafted with Fumaric acid/Acrylamide (CMC/FA/AAm=CFA) hydrogel and their silver nanocomposite hydrogels (CFA-Ag x, x = 5, 10 and 20) were developed by simple, cost effective and ecofriendly greener method. Mint leaf extract was used as an efficient natural reducing agent due to presence of active and antioxidant potential of polyphenol and flavonoid components. Swelling equilibrium of CFA hydrogel showed Seq% 3000 both in pH medium and distilled water. CFA (90:10) hydrogel has been produced greater than Seq% 6000. The synthesized CFA (90:10)-Ag-5, CFA (90:10)-Ag-10 and CFA (90:10)-Ag-20 nanocomposite hydrogels have been observed lower Seq% 2000-3000 than the CFA hydrogel. The homogeneous distribution of AgNPs throughout the CFA hydrogel and nanocomposites has been explored by SEM analysis. The interaction of network heteroatoms with AgNPs has been strongly revealed by the FTIR spectra and XRD analysis. The thermal stability of CFA (90:10)-Ag-5, 10, and 20 nanocomposite hydrogels have showed greater stability than CFA hydrogel which is confirmed by TGA/DSC thermogram analysis. The TEM analysis was used to explore a uniform distribution of spherical AgNPs (10 nm-50 nm) embedded on the CFA composite hydrogel. The CFA (90:10)-Ag-20 nanocomposite hydrogel has showed good antibacterial activity beside E. coli (Gram positive) and S. aureus (Gram negative) pathogens. Based on the antibacterial activity and swelling properties of CFA-Ag nanocomposite hydrogels have the ability to accelerate the antibacterial activity and are potential candidates for medical and environmental applications.

Production of single-component cellulose-based hydrogel and its utilization as adsorbent for aqueous contaminants

The growing concern for the environment has resulted in renewed interest in bio-based resources. This study aims to produce a hydrogel adsorbent from cellulose and examine its adsorption performance. In pursuit of this goal, we report a simple one-pot synthesis of cellulose acetate sulfate (CAS), followed by the formation of CAS hydrogels and their subsequent adsorption performances. The CAS includes both hydrophilic and hydrophobic functional groups, enable the formation of a single-component hydrogel through intermolecular interactions in deionized water. The thermal reversibility of CAS hydrogels makes them easily processable into various shapes. The durability of the CAS hydrogel adsorbents can be improved by introducing divalent cations (e.g., Ca²⁺), which create ionically crosslinked hydrogels. The ionically a crosslinked CAS hydrogel adsorbent exhibits a maximum adsorption capacity of 245 mg/g for methylene blue (MB) at 23 °C and a pH of 7. The adsorption behavior of MB on the CAS hydrogel follows both the pseudo-second-order model and the Langmuir adsorption isotherm model. Furthermore, the CAS hydrogel adsorbent maintains a 70 % removal ratio after five cycles. The simplicity of synthesis and hydrogel formation opens up new possibilities for producing and utilizing cellulose-based hydrogels as adsorbents for aqueous contaminants.

Research Progress of Polysaccharide-Based Natural Polymer Hydrogels in Water Purification

The pollution and scarcity of freshwater resources are global problems that have a significant influence on human life. It is very important to remove harmful substances in the water to realize the recycling of water resources. Hydrogels have recently attracted attention due to their special three-dimensional network structure, large surface area, and pores, which show great potential for the removal of pollutants in water. In their preparation, natural polymers are one of the preferred materials because of their wide availability, low cost, and easy thermal degradation. However, when it is directly used for adsorption, its performance is unsatisfactory, so it usually needs to be modified in the preparation process. This paper reviews the modification and adsorption properties of polysaccharide-based natural polymer hydrogels, such as cellulose, chitosan, starch, and sodium alginate, and discusses the effects of their types and structures on performance and recent technological advances.

Dual-functional lignin-based hydrogels for sustained release of agrochemicals and heavy metal ion complexation

An effective way of improving the efficiency of agrochemicals and improving crop yield and quality is by slow or sustained release, which is conducive to environmental protection. Meanwhile, the excessive amount of heavy metal ions in soil can create toxicity in plants. Here, we prepared lignin-based dual-functional hydrogels containing conjugated agrochemical and heavy metal ligands through free-radical copolymerization. The content of the agrochemicals (including plant growth regulator 3-indoleacetic acid (IAC) and herbicide 2,4-dichlorophenoxyacetic acid (DCP)) in the hydrogels were tuned by changing the hydrogel composition. The conjugated agrochemicals could slowly release through the gradual cleavage of the ester bond. As a result of the release of the DCP herbicide, the growth of lettuce was effectively regulated, thus confirming the feasibility and effectiveness of this system in application. At the same time, due to the presence of metal chelating groups (such as COOH, phenolic OH, and tertiary amine) the hydrogels could act as adsorbents or stabilizers towards heavy metal ions for improving the soil remediation and preventing the adsorption of these toxic metals by plant roots. Specifically, Cu(II) and Pb(II) could be adsorbed >380 and 60 mg/g, respectively.

Arsenite (III) removal via manganese-decoration on cellulose nanocrystal -grafted polyethyleneimine nanocomposite

The manganese is successfully induced as a "bridge joint" to fabricate a new adsorbent (CNC-Mn-PEI) connecting cellulose nanocrystal (CNC) and polyethyleneimine (PEI) respectively. It was used to remove As (III) from waste water. It has been proved that the incompact CNC and PEI were successfully connected by Mn ions, which induced the formation of O-Mn-O bonds and the removal efficiency is maintained in the broad pH range of 4-8, even with the influence of NO₃^- and CO₃^2-. The CNC-Mn-PEI was characterized by Brunauer-Emmett-Telley (BET) method and the results showed that the nanoparticle of the specific surface area was 106.5753 m²/g, it has a significant improvement, compared with CNC-Mn-DW (0.1918 m²/g). The isotherm and kinetic parameters of arsenic removal on CNC-Mn-PEI were well-fitted by the Langmuir and pseudo-second-order models. The maximum adsorption capacities toward As (III) was 78.02 mg/g. After seven regeneration cycles, the removal of As (III) by the adsorbent decreased from 80.78% to 68.2%. Additionally, the hypothetical adsorption mechanism of "bridge joint" effect was established by FTIR and XPS, which provided the three activated sites from CNC-Mn-PEI can improve the arsenic removal efficiency, and providing a new stratagem for the arsenic pollution treatment.

Synthesis and Applications of Carboxymethyl Cellulose Hydrogels

Hydrogels are basic materials widely used in various fields, especially in biological engineering and medical imaging. Hydrogels consist of a hydrophilic three-dimensional polymer network that rapidly expands in water and can hold a large volume of water in its swelling state without dissolving. These characteristics have rendered hydrogels the material of choice in drug delivery applications. In particular, carboxymethyl cellulose (CMC) hydrogels have attracted considerable research attention for the development of safe drug delivery carriers because of their non-toxicity, good biodegradability, good biocompatibility and low immunogenicity. Aiming to inspire future research in this field, this review focuses on the current preparation methods and applications of CMC gels and highlights future lines of research for the further development of diverse applications.

Degradation of methylene blue through Fenton-like reaction catalyzed by MoS2-doped sodium alginate/Fe hydrogel

In this study, a low-cost and high-performance MoS2/sodium alginate (SA)/Fe (MSF) hydrogel catalyst was prepared. It was found that the MSF hydrogel could efficiently catalyze the degradation of methylene blue (MB) through the Fenton reaction without the addition of Fe2+. The reaction was initiated by Fe2+ which was derived from the cyclic redox reaction between MoS2 and Fe3+ and produced large quantities of ·OH to degrade the MB. The effect of MoS2 concentration, FeCl3·6H2O concentration, H2O2 dosage, solution pH, and light on the degradation was systematically studied. The MoS2 concentration of 0.5 mg/ mL, FeCl3·6H2O concentration of 0.25 g/mL, 50 μL H2O2, and the pH of 4.0 were the optimized parameters. Moreover, it was found that the MB degraded faster under the infrared radiation. The MB removal rate reached as high as 98% within 15 min in the presence of a low concentration of H2O2 and the procedure could be repeated 5 times. The MSF hydrogel provided an effective and simple strategy for the sustainable degradation of organic pollutants in wastewater.

Self-healable nanocellulose composite hydrogels combining multiple dynamic bonds for drug delivery

Herein, we developed two nanocomposite polysaccharide hydrogels TPP-CNC and TPP-CNF via simple mixing method, which were constructed with multiple dynamic bonds. The microstructural features, mechanical properties, rheological properties, healable ability and biocompatibility of the complex hydrogels were evaluated. The TPP-CNC and TPP-CNF complex hydrogels exhibited higher tensile strength than pure polysaccharide hydrogel, from ~259 KPa to ~890 KPa and ~910 KPa, respectively, that was attributed to the contribution of ionic crosslinked network and hydrogen bonds. In addition, the hydrogels indicated superior fatigue resistance and high energy dissipation ratio during loading-unloading tests because of the physical sacrifice bonds, which also decreased the self-healing time at room temperature (~15 min). More importantly, the drug loaded nanocomposite hydrogels showed sustained release, reduction burst release, increased release under acidic environment, and the drug release kinetics belonged to Fickian diffusion mechanism. Therefore, the nanocellulose polysaccharide hydrogels have the highly promising to explore as biomaterials for drug delivery.

Synthesis and characterization of bacterial cellulose-based composites for drug delivery

Bacterial cellulose (BC) was produced via the static fermentation process using G. xylinus. Cellulose and diethylaminoethyl cellulose (DEAEC) were converted to carboxymethyl cellulose (CMC) and carboxymethylated diethylaminoethyl cellulose (CMDEAEC) while to prepare the composites, two different methods were used: by either direct addition of the materials to the fermentation medium or addition of the materials after the fermentation process. Structural characteristics of composites were determined using instrumental techniques. Potential application of BC, BC/CMC, and BC/CMDEAEC in drug delivery system was examined using methylene blue (MB) as a model drug where the loading capacity and swelling ratio for the samples were as follows: BC/CMC > BC/CMDEAEC > BC. The result of the in-vitro study was in favor of the release behavior of BC/CMDEAEC composite. The MB loading data were fitted using Langmuir and Freundlich equations and kinetic behavior of the release was described by Higuchi and Korsmeyer-Peppas models.

Smart Adsorbents for Aquatic Environmental Remediation

A noticeable interest and steady rise in research studies reporting the design and assessment of smart adsorbents for sequestering aqueous metal ions and xenobiotics has occurred in the last decade. This motivates compiling and reviewing the characteristics, potentials, and performances of this new adsorbent generation's metal ion and xenobiotics sequestration. Herein, stimuli-responsive adsorbents that respond to its media (as internal triggers; e.g., pH and temperature) or external triggers (e.g., magnetic field and light) are highlighted. Readers are then introduced to selective adsorbents that selectively capture materials of interest. This is followed by a discussion of self-healing and self-cleaning adsorbents. Finally, the review ends with research gaps in material designs.

Villi-like poly(acrylic acid) based hydrogel adsorbent with fast and highly efficient methylene blue removing ability

Organic dye-containing wastewater has become an increasingly serious environmental problem due to the rapid development of the printing and dyeing industry. Hydrogel is a promising adsorbent for organic dyes because of its unique three-dimension network structure and versatile functional groups. Though many efforts have been made in hydrogel adsorbents recently, there is still a critical challenge to fabricate hydrogel adsorbent with high adsorption capacity and high efficiency at the same time. To address this concern, we developed a calcium hydroxide nano-spherulites/poly(acrylic acid -[2-(Methacryloxy)ethyl]trimethyl ammonium chloride) hydrogel adsorbent with novel villi-like structure. The hydrogels were prepared through a simple free radical copolymerization method using calcium hydroxide nano-spherulites as crosslinker. The resultant hydrogel adsorbents showed a maximum adsorption capacity of 2249 mg/g in a 400 mg/L methylene blue solution and a high removal ratio of 98% in 1 h for a 50 mg/L methylene blue solution. In addition, the adsorption behaviors of our hydrogel adsorbents could be well described by pseudo-second-order kinetic model and Langmuir adsorption isotherm model. Furthermore, this kind of hydrogel adsorbent showed selective adsorption behavior for methylene blue. Altogether, the hydrogel adsorbent developed in this work has a high capacity and high efficiency in organic dye removing and promised a great potential in wastewater treatment application.

Adsorption properties of β-cyclodextrin modified hydrogel for methylene blue

With the development of dye and printing, production wastewater has become one of the most primary pollution sources of water and soil pollution. Most of the dyes are toxic substances, which have the "three-way" effect of carcinogenic, teratogenic and mutagenic. Therefore, it is a very difficult but significant issue to deal with the dye in the wastewater. Here, we report a study on low-cost, high-capacity hydrogels that remove water-soluble dyes. The hydrogel is prepared by crosslinking the β-cyclodextrin and functional monomer: acrylamido and 2-acrylamide-2-methylpropane sulfonic acid by aqueous solution polymerization, meanwhile, alkaline hydrolysis is also an important step for adsorption performance. After alkaline hydrolysis, the amide and sulfonic groups in the hydrogel were converted into carboxylate and sulfonate, which was beneficial to the adsorption of cationic dyes. This polymer could remove 96.58% methylene blue (400 mg/L) and only requires 0.02 wt%. Its maximum adsorption capacity for methylene blue could reach 2638.22 mg/g under equilibrium condition. It is the most powerful adsorbent used to treat dye wastewater, according to the report. It also provides some references for hydrogel treatment of dye wastewater.

Adsorption of rhodamine B by organic porous materials rich in nitrogen, oxygen, and sulfur heteroatoms

Rhodamine B is a non-degradable carcinogenic dye, so it is of great significance to remove rhodamine B from wastewater.

Polysaccharide-Based Hydrogels Derived from Cellulose: The Architecture Change from Nanofibers to Hydrogels for a Putative Dual Function in Dye Wastewater Treatment

Agricultural production-caused water contamination has become an urgent environmental issue that has drawn much attention in recent years. One such contamination case is the environmental disposal of colored effluents from the food processing industry (i.e., food dyes). Effective methods for removing dye contaminants from water have been increasingly sought, and different adsorbents have been developed for this purpose. Here, polysaccharide-based hydrogels derived from cellulose were constructed and used in the removal of methylene blue (MB) (as the representative dye) from an aqueous medium (as simulated dye liquor wastewater). To improve the purification efficiency, TiO₂ nanoparticles were encapsulated into cellulose nanofibers, which were consequently changed to hydrogels with respective advantages. The morphology, chemical composition, and structure of the as-prepared polysaccharide-based hydrogels and the transformation process from nanofibers to hydrogels were revealed by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction, and the presence of a gel network structure and TiO₂ nanoparticles was confirmed. As expected, the polysaccharide-based hydrogels exhibited good MB removal performance because of their synergistic effects of absorption and photocatalytic degradation. Furthermore, the cell cytotoxicity test showed that the polysaccharide-based hydrogels possessed good biocompatibility. The facile, noncytotoxic, and general strategy presented here could be extended to the preparation of other polysaccharide-based hydrogel materials and has good prospects for application in wastewater treatment.