Optimization of extraction and deamidation of edible protein from evening primrose (Oenothera biennis L.) oil processing by-products and its effect on structural and techno-functional properties

NADPH-mediated seedless in situ formation of gold or gold-platinum nanoparticles for the enzymatic determination of atropine

The without-seeds in situ formation of gold nanoparticles from NADPH and its application to the colorimetric determination of atropine (a tropane alkaloid) in cereals is reported. The method is based on a chemical hydrolysis, followed by an enzymatic oxidation by NADP catalyzed by tropinone reductase in the presence of Au(III) or Au(III)/Pt(II). During this reaction, the formed NADPH reduces the metal ion precursor to AuNPs (or AuPtNPs) and the absorption due to the plasmon band (550 nm or 575 nm) is measured. The method (AuPtNPs) allows the determination of the analyte in the concentration range 0.025 to 0.09 mM with an RSD of 3% (n = 5) and is applied to its determination in spiked buckwheat samples using the standard addition method, with 96.9 ± 2.0% recovery. It is also demonstrated that NAD(P)H and NADH have different kinetics for AuNP generation, which could be used to discriminate between these two cofactors.

Improving solubility of rice protein powder by modifying its physicochemical properties by ultrasound-assisted protein-glutaminase

The effect of ultrasound-assisted protein-glutaminase (PG) deamidation on the physicochemical properties of rice protein (RP) was investigated. After ultrasound pretreatment, the degree of deamidation of RP reached the highest of 60.4 % at deamidating for 16 h. With the deamidating time increasing, the particle size of RP became smaller and the absolute value of ζ-potential gradually increased. For functional properties of RP, ultrasound-assisted PG deamidation improved the foaming capacity, emulsifying capacity and oil-holding capacity of RP. Based on the ameliorative physicochemical properties of RP, the properties of rice protein powder (RPP) were further determined. The solubility of RPP was significantly improved, increased by 102.6 % at 90 °C compared with the non-treated. Meanwhile, the antioxidant activity and flavor of RPP under PG deamidation were remarkably improved. In vitro digestibility of RPP also increased significantly. These results illustrated that PG deamidation could be an efficient method for improving the properties of proteins.

In Vitro and In Ovo Evaluation of Oenothera biennis L. Oil as an Alternative Preservative for Oil-Based Products

There is a growing need for safer alternatives to synthetic additives commonly used in lipophilic carriers for products such as foods, pharmaceuticals, personal care items, and cosmetics. Natural antioxidants, which prevent lipid peroxidation while providing additional health benefits, offer a promising solution. Evening primrose oil, a rich source of antioxidant compounds with numerous biological benefits, emerges as a potential natural preservative for oil-based products. Our study evaluates a combination of sunflower oil, a widely used cold-pressed oil, with evening primrose oil for potential applications in various fields such as cosmetic, pharmaceutical, or food manufacturing. Various methods were applied to assess oxidative stability by calculating the peroxide value, the p-anisidine value, and the total oxidation value, while biological safety was evaluated using the chick embryo's chorioallantoic membrane and histological analysis. The findings highlight that evening primrose oil, with its balanced effects on epithelial tissues and vascularization, as well as its strong anti-lipid peroxidation properties, is a suitable alternative to synthetic preservatives when used in combination with cold-pressed oils. This proposed oil combination, emphasizing the safety and beneficial properties of evening primrose oil, shows significant potential for applications in the pharmaceutical industry, dermatology, cosmetology, and food manufacturing.

Rapid and efficient high-performance liquid chromatography-ultraviolet determination of total amino acids in protein isolates by ultrasound-assisted acid hydrolysis

This study presents the optimization and validation of an ultrasound-assisted acid method for the HPLC-UV determination of amino acids in plant-based proteins. The research focuses on enhancing hydrolysis efficiency and reducing environmental impact. Ultrasound treatment significantly accelerated hydrolysis by creating cavitation, which increases local pressure and temperature, leading to faster reaction rates. The optimal condition was a 30-minute treatment at 90 °C with 6 M hydrochloric acid. The 9-fluorenylmethyloxycarbonyl chloride derivatization was best performed at pH 9.0 using borate buffer, ethanol as the organic solvent, and a 5-minute derivatization time with a 5 mM concentration. The method's analytical performance, validated according to FDA guidelines, showed excellent selectivity, specificity, linearity (r2 > 0.999), accuracy (recovery between 80-118 %), and precision (RSD<10.9). The analysis of 15 plant-based proteins revealed distinct amino acid profiles. Compared to traditional acid hydrolysis methods, the ultrasound-assisted approach demonstrated no significant difference in results (p-value > 0.05), confirming its reliability. The optimized ultrasound-assisted method is a reliable and efficient alternative for amino acid analysis, offering significant cost and time savings while maintaining high analytical performance. These findings are crucial for nutritional planning and developing functional foods to improve health outcomes.

Technological advances in protein extraction, structure improvement and assembly, digestibility and bioavailability of plant-based foods

Plant-based foods are being considered seriously to replace traditional animal-origin foods for various reasons. It is well known that animals release large amounts of greenhouse gases into the environment during feeding, and eating animal-origin foods may also cause some health problems. Moreover, animal resources will likely be in short supply as the world population grows. It is highly likely that serious health problems ascribed to insufficient protein intake in some areas of the world will occur. Studies have shown that environmentally friendly, abundant, and customizable plant-based foods can be an effective alternative to animal-based foods. However, currently, available plant-based foods lack nutrients unique to animal-based foods. Innovative processing technologies are needed to improve the nutritional value and functionality of plant-based foods and make them acceptable to a wider range of consumers. Therefore, protein extraction technologies (e.g., high-pressure extraction, ultrasound extraction, enzyme extraction, etc.), structure improvement and assembly technologies (3D printing, micro-encapsulation, etc.), and technologies to improve digestibility and utilization of bioactive substances (microbial fermentation, physical, etc.) in the field of plant-based foods processing are reviewed. The challenges of plant-based food processing technologies are summarized. The advanced technologies aim to help the food industry solve production problems using efficient, environmentally friendly, and economical processing technologies and to guide the development of plant-based foods in the future.

Sustainable proteins from wine industrial by-product: Ultrasound-assisted extraction, fractionation, and characterization

Plant proteins are increasingly being used in the food industry due to their sustainability. They can be isolated from food industry waste and converted into value-added ingredients, promoting a more circular economy. In this study, ultrasound-assisted alkaline extraction (UAAE) was optimized to maximize the extraction yield and purity of protein ingredients from grapeseeds. Grapeseed protein was extracted using UAAE under different pH (9-11), temperature (20-50 °C), sonication time (15-45 min), and solid/solvent ratio (10-20 mL/g) conditions. The structural and functional attributes of grapeseed protein and its major fractions (albumins and glutelins) were investigated and compared. The albumin fractions had higher solubilities, emulsifying properties, and in vitro digestibilities but lower fluid binding capacities and thermal stability than the UAAE and glutelin fraction. These findings have the potential to boost our understanding of the structural and functional characteristics of grapeseed proteins, thereby increasing their potential applications in the food and other industries.

Purified protein glutaminase from Chryseobacterium proteolyticum enhances the properties of wheat gluten

Protein glutaminase (PG), originating from Chryseobacterium proteolyticum, can catalyze the deamidation of glutamine residues in plant proteins into glutamic acid, thus enhancing its functional properties. However, the low yield of PG limits its industrial production. In this study, the yield of PG in C. proteolyticum TM1040 increased by 121 %, up to 7.30 U/mL in a 15 L fermenter after medium optimization. Subsequently, purified PG was obtained by cation exchange chromatography (CEX) coupled with hydrophobic interaction chromatography (HIC). The degree of deamidation (DD) of wheat gluten after purified PG deamidation was 87.11 %, which is superior to chemical deamidation in safety and DD. The emulsifying and foaming properties of deamidated wheat gluten were 2.67 and 18.86 times higher, and the water- and oil-holding properties were 4.23 and 18.77 times higher, respectively. The deamidated wheat gluten with enhanced functional properties was used to improve the flavor and texture in baking cakes.

Oilseed meal proteins: From novel extraction methods to nanocarriers of bioactive compounds

The global demand for animal proteins is predicted to increase twofold by 2050. This has led to growing environmental and health apprehensions, thereby prompting the appraisal of alternative protein sources. Oilseed meals present a promising alternative due to their abundance in global production and inherent dietary protein content. The alkaline extraction remains the preferred technique for protein extraction from oilseed meals in commercial processes. However, the combination of innovative techniques has proven to be more effective in the recovery and functional modification of oilseed meal proteins (OMPs), resulting in improved protein quality and reduced allergenicity and environmental hazards. This manuscript explores the extraction of valuable proteins from sustainable sources, specifically by-products from the oil processing industry, using emerging technologies. Chemical structure, nutritional value, and functional properties of the main OMPs are evaluated with a particular focus on their potential application as nanocarriers for bioactive compounds.

Enhancement of functional properties, digestive properties, and in vitro digestion product physiological activity of extruded corn gluten meal by enzymatic modification

BACKGROUND

Enzymatic modification is an effective means of improving the functional properties, digestive properties, and in vitro digestion product physiological activity of proteins, thus significantly expanding protein uses in various food applications.

RESULTS

In this study, the addition of chymotrypsin (CT) at pH 9.0 and 11.0 was found to significantly improve the functional properties (solubility, foaming properties, water holding capacity, oil holding capacity, etc.) and digestive properties of extruded corn gluten meal (ECGM). Similar changes were observed when treating ECGM with glutaminase, protein glutaminase, and papain. These changes were likely due to the increase in number of carboxyl groups and the multiple effects of change in protein net charge and conformation caused by enzymatic deamidation. Of note, ECGM deamidated by CT showed the highest degree of deamidation, solubility, and gastrointestinal digestibility at pH 11.0, up to 44.92%, 43.75%, and 82.22%, respectively. In addition, CT-ECGM digestion product exhibited strong antioxidant activity and potential to promote alcohol metabolism in both a static digestion model and dynamic digestion model, even comparable to commercial corn peptides (CCP), while being inexpensive and of low bitterness compared to CCP. Meanwhile, the physiological activity enhanced as the molecular weight of digestion product decreased with the digested component having strongest activity.

CONCLUSION

This study may promote the application of ECGM as a food component in the food industry or even as a substitute for CCP. © 2023 Society of Chemical Industry.

Plant-based proteins from agro-industrial waste and by-products: Towards a more circular economy

There is a pressing need for affordable, abundant, and sustainable sources of proteins to address the rising nutrient demands of a growing global population. The food and agriculture sectors produce significant quantities of waste and by-products during the growing, harvesting, storing, transporting, and processing of raw materials. These waste and by-products can sometimes be converted into valuable protein-rich ingredients with excellent functional and nutritional attributes, thereby contributing to a more circular economy. This review critically assesses the potential for agro-industrial wastes and by-products to contribute to global protein requirements. Initially, we discuss the origins and molecular characteristics of plant proteins derived from agro-industrial waste and by-products. We then discuss the techno-functional attributes, extraction methods, and modification techniques that are applied to these plant proteins. Finally, challenges linked to the safety, allergenicity, anti-nutritional factors, digestibility, and sensory attributes of plant proteins derived from these sources are highlighted. The utilization of agro-industrial by-products and wastes as an economical, abundant, and sustainable protein source could contribute towards achieving the Sustainable Development Agenda's 2030 goal of a "zero hunger world", as well as mitigating fluctuations in food availability and prices, which have detrimental impacts on global food security and nutrition.

Physicochemical and Functional Properties of Moringa Seed Protein Treated with Ultrasound

Functional and structural properties of Moringa protein concentrate (MPC), obtained from defatted Moringa oleifera seed, were investigated after treating it with an ultrasonic technique. For this purpose, dried M. oleifera seed powder was defatted and subjected to a simple protein precipitation method to generate a MPC with 73.2% protein contents. Then, a Box-Behnken design was applied to optimize the sonication treatment of MPC where ultrasound amplitude (20-80%), treatment time (5-25 min), and solute-to-solvent ratio (0.1-0.3 g/mL) were studied as factors that influence the protein solubility (PS), emulsion capacity (EC), and foaming capacity (FC) of MPC. The optimal conditions were amplitude of 58%, time of 18 min, and solute to solvent ratio of 0.18 g/mL. At these conditions, PS, EC, and FC were increased to 42, 33, and 73%, respectively, in comparison to untreated one. The structural modification by ultrasound was further confirmed by using Fourier transform infrared spectroscopy which illustrated the MPC modification through the changes in the peak width of amide-I band. Similarly, the intrinsic fluorescence spectral signature also showed a significant increase in the amino residues of MPC. In conclusion, the exposure of hydrophilic groups and the alteration of secondary and tertiary structures induced by ultrasonic treatment improved the functional characteristics of MPC.

Global Food Security and Sustainability Issues: The Road to 2030 from Nutrition and Sustainable Healthy Diets to Food Systems Change

The accomplishment of food/nutrition security for all across sustainable food systems (SFS) is tied to the Sustainable Development Goals (SDGs). SFS is connected to all SDGs via the traditional framework of social inclusion, economic development, environmental safety, inclusivity, and the development of sustainable food systems. We suggest that, for the world to achieve sustainable development, a shift to SFS is necessary to guarantee food/nutrition security for all, while operating within planetary boundaries to protect ecosystems and adapt to and mitigate climate change. Therefore, there is a requirement for original approaches that implement systemic and more participatory methods to engage with a wider range of food system stakeholders. However, the lack of skills and tools regarding novel methodologies for food system transformation is a key obstacle to the deployment of such approaches in practice. In the first part of this review, a summary of some challenges that occur in the governance of food system transformation is given. Through a case study of plant-based proteins and their biological and chemical modification as diets shift towards alternative proteins, we demonstrate that resource-efficient food systems and food waste, through system transformation, are useful in understanding both (i) how food system transformation has ensued and (ii) how the required transformation is prohibited. Finally, we discuss the implications of food system transformation in terms of nutrition and sustainable healthy diets, which are needed to achieve changes in food safety systems in the future. The linkage of food and the environment is evident, focusing on nutrition and sustainable healthy diets. This cannot be accomplished without system change and research towards new foods and, more specifically, new proteins such as plant-based ones and their biological and chemical modification.

Enhancing Solubility and Reducing Thermal Aggregation in Pea Proteins through Protein Glutaminase-Mediated Deamidation

The limited solubility and stability of pea proteins hinder their utilization in liquid formulations. In this study, protein glutaminase (PG) was employed to modify pea protein isolates (PPIs) and obtain deamidated PPI with varying degrees of deamidation (DD, 10-25%). The solubility and thermal stability of these deamidated PPI samples were assessed, and a comprehensive analysis, including SDS-PAGE, zeta potential, FTIR, surface hydrophobicity, and intrinsic fluorescence, was conducted to elucidate the mechanism behind the improvement in their functional properties. The results reveal that PG modification greatly enhances the solubility and heat stability of PPI, with the most notable improvements observed at higher DD (>20%). PG modification increases the net charge of PPI, leading to the unfolding and extension of the protein structures, thus exposing more hydrophobic groups. These structural changes are particularly pronounced when DD exceeds 20%. This increased electrostatic repulsion between carboxyl groups would promote protein unfolding, enhancing interactions with water and hindering the aggregation of unfolded protein in the presence of salts at elevated temperatures (supported by high-performance size exclusion chromatography and transmission electron microscopy). Accordingly, PG-mediated deamidation shows promise in enhancing the functional properties of PPI.

Research Advances in Plant Protein-Based Products: Protein Sources, Processing Technology, and Food Applications

Plant proteins are high-quality dietary components of food products. With the growing interest in sustainable and healthy food alternatives, plant proteins have gained significant attention as viable substitutes for animal-based proteins. Understanding the diversity of protein sources derived from plants, novel processing technology, and multiple applications is crucial for developing nutritious and sustainable plant protein-based products. This Review summarizes the natural sources of traditional and emerging plant proteins. The classifications, processing technologies, and applications of plant protein-based products in the food industry are explicitly elucidated. Moreover, the advantages and disadvantages of plant protein-based food products are revealed. Strategies such as protein fortification and complementation to overcome these shortcomings are critically discussed. We also demonstrate several issues that need to be addressed in future development.

Sugar-Free, Vegan, Furcellaran Gummy Jellies with Plant-Based Triple-Layer Films

Increasing consumer awareness of the impact of nutrition on health and the growing popularity of vegan diets are causing a need to look for new plant-based formulations of standard confectionery products with high energy density and low nutritional value, containing gelatin. Therefore, the aim of this study was to develop vegan and sugar-free gummy jellies based on an algae-derived polysaccharide-furcellaran (FUR). Until now, FUR has not been used as a gel-forming agent despite the fact that its structure-forming properties show high potential in the production of vegan confectionery. The basic formulation of gummy jellies included the addition of soy protein isolate and/or inulin. The final product was characterized regarding its rheological, antioxidant, mechanical and physicochemical properties. Eco-friendly packaging for the jellies composed of a three-layer polymer film has also been developed. It was observed that the highest values of textural parameters were obtained in jellies containing the addition of soy protein isolate, whose positive effect was also found on antioxidant activity. Before drying, all furcellaran-based gel systems showed G' and G" values characteristic of strong elastic hydrogels. Storing jellies for a week under refrigeration resulted in an increase in hardness, a decrease in moisture content and reduced water activity values. Overall, our study indicates the high potential of furcellaran both as a gelling agent in confectionery products and as a base polymer for their packaging.

Green leaf proteins: a sustainable source of edible plant-based proteins

The rise in the global population, which is projected to reach 9.7 billion by 2050, has resulted in an increased demand for proteins in the human diet. The green leaves of many plants are an affordable, abundant, and sustainable source of proteins suitable for human consumption. This article reviews the various sources of green leaf proteins that may play an important role in alleviating global malnutrition, including those from alfalfa, amaranth, cabbage, cassava, duckweed, moringa, olive, radish, spinach, sugar beet, and tea. The structure of green leaves and the location of the proteins within these leaves are described, as well as methods for extracting and purifying these proteins. The composition, nutritional profile, and functional attributes of green leaf proteins are then discussed. The potential advantages and disadvantages of using green leaf proteins as functional food ingredients are highlighted. The importance of obtaining a better understanding of the composition and structure of different green leaves and the proteins extracted from them is highlighted. This includes an assessment of non-protein nitrogen and anti-nutritional compounds that may be present. Furthermore, the impact of isolation and purification techniques on the functionality of the plant protein ingredients obtained must be carefully evaluated.

Cereal bran proteins: recent advances in extraction, properties, and applications

The projected global population is expected to reach around 9.7 billion by 2050, indicating a greater demand for proteins in the human diet. Cereal bran proteins (CBPs) have been identified as high-quality proteins, with potential applications in both the food and pharmaceutical industries. In 2020, global cereal grain production was 2.1 billion metric tonnes, including wheat, rice, corn, millet, barley, and oats. Cereal bran, obtained through milling, made up 10-20% of total cereal grain production, varying by grain type and milling degree. In this article, the molecular composition and nutritional value of CBPs are summarized, and recent advances in their extraction and purification are discussed. The functional properties of CBPs are then reviewed, including their solubility, binding, emulsifying, foaming, gelling, and thermal properties. Finally, current challenges to the application of CBPs in foods are highlighted, such as the presence of antinutritional factors, low digestibility, and allergenicity, as well as potential strategies to improve the nutritional and functional properties by overcoming these challenges. CBPs exhibit nutritional and functional attributes that are similar to those of other widely used plant-based protein sources. Thus, CBPs have considerable potential for use as ingredients in food, pharmaceutical, and other products.

Ultrasound-assisted phosphorylation of goose myofibrillar proteins: improving protein structure and functional properties

BACKGROUND

Goose meat is rough and embedded with dense connective tissue, impairing protein solubility. Therefore, to improve the functional properties of goose myofibrillar protein (GMP), ultrasound was used to assist the phosphorylation of GMP.

RESULTS

The fact that GMP attached covalently with the phosphate group of sodium tripolyphosphate (GMP-STP) was disclosed directly by Fourier transform infrared spectroscopy. Furthermore, ultrasound significantly improved the hydrophobicity and solubility of GMP-STP, which could be attributed to the conversion of α-helix to β-sheet, β-turns, and random coils by sonication. The spatial stabilization of the protein phosphorylation process was boosted by ultrasound, making the droplets more dispersed, and thus an improvement in the functional properties of GMP-STP was observed. Water-holding capacity, oil-binding capacity, and emulsifying and foaming properties were best at an ultrasound power of 400 W.

CONCLUSION

Ultrasound-assisted phosphorylation has great potential to modulate the structure-function relationship of proteins. © 2023 Society of Chemical Industry.

Sequential ultrasound assisted deep eutectic solvent-based protein extraction from Sacha inchi meal biomass: towards circular bioeconomy

The need for high-quality dietary proteins has risen over the years with improvements in the quality of life. Deep eutectic solvents (DESs) have been regarded as potential green alternatives to conventional organic solvents for protein extraction from press cake biomass, meeting the needs of sustainable development goals. Sacha inchi seed meal (SIM) is generated as a by-product of the seed oil extraction industries containing high protein content. The current study presents a novel ultrasound assisted DES method for the extraction of SIM protein in a sequential manner. Four different DESs were screened, out of which choline chloride (ChCl)/glycerol (1:2) gave promising results in protein recovery and was further selected. The sequential ultrasound-ChCl/glycerol could effectively extract high total crude protein content (77.43%) from SIM biomass compared to alone ultrasound (29.21%) or ChCl/glycerol (58.32%) treatment strategies. The SIM protein extracted from ultrasound-ChCl/glycerol exhibited high solubility (94.39%) at alkaline pH and highest in vitro digestibility (71.16%) by digestive enzymes (pepsin and trypsin). The protein characterization by SDS-PAGE and FTIR elucidated the structural properties and presence of different functional groups of SIM protein. Overall, the sequential ultrasound-ChCl/glycerol revealed its significant potential for one-step biorefining of the waste Sacha inchi meal biomass for circular bioeconomy.

Ultrasound-Assisted Extraction of Protein from Pumpkin Seed Press Cake: Impact on Protein Yield and Techno-Functionality

Conventional solvent-based methods widely used for isolating plant proteins may deliver an unsatisfactory protein yield and/or result in protein degradation. The present study started with the optimization of pumpkin seed protein from press cake by alkaline extraction and subsequent isoelectric precipitation. Subsequently, extraction was supported by ultrasound under three conditions: ultrasonic treatment followed by alkaline extraction (US+AE), concomitant ultrasonic treatment and alkaline extraction (UAE), and alkaline extraction followed by ultrasonic treatment (AE+US). Compared to the control group, an increase in protein yield was achieved after ultrasonic treatment, while the highest protein yield was obtained with AE+US (57.8 ± 2.0%). Isolates with a protein content of 94.04 ± 0.77 g/100 g and a yield of 43.6 ± 0.97% were obtained under optimized conditions. Following ultrasonic treatment applied during extraction, solubility, foaming capacity, foam stability, and denaturation enthalpy of the isolated protein increased, and water binding capacity decreased as compared to non-sonicated samples. The d90 particle size percentile of the extracted suspensions was 376.68 ± 38.32 µm for the control experiments, and particle size was significantly reduced in ultrasound-assisted treatments down to d90 = 179.93 ± 13.24 µm for the AE+US treatment). Generally, ultrasonication resulted in a significant increase in protein yield and improved techno-functional properties of the isolates.

Extraction Optimization, Functional and Thermal Properties of Protein from Cherimoya Seed as an Unexploited By-Product

Plant-based proteins are gaining in attraction compared with animal-based proteins due to their superior ethical profiles, growing concerns on the part of various organizations about animal health and welfare, and increased global greenhouse-gas emissions in meat production. In this study, the response surface methodology (RSM) using a Box-Behnken design (BBD) was applied to optimize the ultrasound-assisted alkaline extraction of cherimoya-seed proteins as valuable by-products. The effects of three pH, temperature, and time factors on the protein-extraction yield and protein content were investigated. The pH at 10.5 and temperature of 41.8 °C for 26.1 min were considered the optimal ultrasound-assisted alkaline-extraction conditions since they provided the maximum extraction yield (17.3%) and protein content (65.6%). An established extraction technique was employed to enhance the cherimoya-seed protein yield, purity, and functional properties. A thermogravimetric analysis (TGA) of the samples showed that the ultrasound-assisted alkaline extraction improved the thermal stability of the protein concentrate.

Phenolics from Defatted Black Cumin Seeds (Nigella sativa L.): Ultrasound-Assisted Extraction Optimization, Comparison, and Antioxidant Activity

An ultrasound-assisted method was used for the extraction of phenolics from defatted black cumin seeds (Nigella sativa L.), and the effects of several extraction factors on the total phenolic content and DPPH radical scavenging activity were investigated. To improve the extraction efficiency of phenolics from black cumin seed by ultrasonic-assisted extraction, the optimal extraction conditions were determined as follows: ethanol concentration of 59.1%, extraction temperature of 44.6 °C and extraction time of 32.5 min. Under these conditions, the total phenolic content and DPPH radical scavenging activity increased by about 70% and 38%, respectively, compared with conventional extraction. Furthermore, a complementary quantitative analysis of individual phenolic compounds was carried out using the HPLC-UV technique. The phenolic composition revealed high amounts of epicatechin (1.88–2.37 mg/g) and rutin (0.96–1.21 mg/g) in the black cumin seed extracts. Ultrasonic-assisted extraction can be a useful extraction method for the recovery of polyphenols from defatted black cumin seeds.

Ultrasonic-assisted pH shift-induced interfacial remodeling for enhancing the emulsifying and foaming properties of perilla protein isolate

In order to expand the applications of plant protein in food formulations, enhancement of its functionalities is meaningful. Herein, the effects of ultrasonic (20 KHz, 400 W, 20 min)-assisted pH shift (pH 10 and 12) treatment on the structure, interfacial behaviors, as well as the emulsifying and foaming properties of perilla protein isolate (PPI) were investigated. Results showed that the solubility of PPI treated by ultrasonic-assisted pH shift (named UPPI-10/12) exceeded 90 %, which was at least 2 and 1.4 times that of untreated PPI and ultrasound-based PPI. Meanwhile, UPPI-10/12 possessed higher foamability (increasing by at least 1.2 times) and good emulsifying stability. Ultrasonic-assisted pH shift treatment decomposed large PPI aggregates into tiny particles, evident from the dynamic light scattering (DLS) and atomic force microscopy results. Besides, this approach induced a decrease in α-helix of PPI and an increase in β-sheet, which might result in the exposure of the hydrophobic group on the structural surface of PPI, thus leading to the increase of surface hydrophobicity. The smaller size and higher hydrophobicity endowed UPPI-10/12 faster adsorption rate, tighter interfacial structure, and higher elastic modulus at the air- and oil-water interfaces, evident from the cryo-SEM and interfacial dilatational rheological results. Thus, the emulsifying and foaming properties could evidently enhance. This study demonstrated that ultrasonic-assisted pH shift technique was a simple approach to effectively improve the functional performance of PPI.

L-Glutamine-, peptidyl- and protein-glutaminases: structural features and applications in the food industry

L-Glutaminases are enzymes that catalyze the cleavage of the gamma-amido bond of L-glutamine residues, producing ammonia and L-glutamate. These enzymes have several applications in food and pharmaceutical industries. However, the L-glutaminases that hydrolyze free L-glutamine (L-glutamine glutaminases, EC 3.5.1.2) have different structures and properties with respect to the L-glutaminases that hydrolyze the same amino acid covalently bound in peptides (peptidyl glutaminases, EC 3.5.1.43) and proteins (protein-glutamine glutaminase, EC 3.5.1.44). In the food industry, L-glutamine glutaminases are applied to enhance the flavor of foods, whereas protein glutaminases are useful to improve the functional properties of proteins. This review will focus on structural backgrounds and differences between these enzymes, the methodology available to measure the activity as well as strengths and limitations. Production methods, applications, and challenges in the food industry will be also discussed. This review will provide useful information to search and identify the suitable L-glutaminase that best fits to the intended application.

The characteristics of protein-glutaminase from an isolated Chryseobacterium cucumeris strain and its deamidation application

Protein-glutaminase (PG), a deamidation enzyme commercially derived from Chryseobacterium proteolyticum, is used to improve the solubility and other functional properties of food proteins. In this study, a new PG-producing strain, Chryseobacterium cucumeris ZYF120413-7, was isolated from soil, and it had a high PG yield and a short culture time. It gave the maximum PG activity with 0.557 U/ml on Cbz-Gln-Gly after 12 h of culture, indicating that it was more suitable for PG production. The enzyme activity recovery and purification fold were 32.95% and 161.95-fold, respectively, with a specific activity of 27.37 U/mg. The PG was a pre-pro-protein with a 16 amino acids putative signal peptide, a pro-PG of 118 amino acids, and a mature PG of 185 amino acids. The amino acid sequence identity of PG from strain ZYF120413-7 was 74 and 45%, respectively, to that of PG from C. proteolyticum 9670T and BH-PG. The optimum reaction pH and temperature of PG was 6 and 60°C, respectively. Enzyme activity was inhibited by Cu2+. The optimum PG substrate was Cbz-Gln-Gly, and the Km and Vmax values were 1.68 mM and 1.41 μM mg protein−1 min−1, respectively. Degree of deamidation (DD) of soy protein isolate (SPI) treated by purified PG was 40.75% within the first 2 h and 52.35% after 18 h. These results demonstrated that the PG from C. cucumeris ZYF120413-7 was a promising protein-deamidating enzyme for improving the functionality of food proteins.

Structural, functional and proteomic differences of proteins extracted from white garlic and Laba garlic

Protein is one of the main nutrients in garlic with multiple functions and healthy effects. The aim of this study was to investigate the effects of greening process on the functional and structural properties of garlic protein, and proteomic strategy was applied to analyze the changes of protein compositions as well as their activities. Results showed that the manufacturing process led to a smaller isoelectric point (pI) and larger particle size of garlic protein (Laba garlic protein, LP) compared to the unprocessed one (untreated white garlic protein, WP). Circular dichroism (CD) and fourier-transform infrared spectroscopy (FTIR) spectra showed that the dominant α-helix structure was lost and became random coil in LP. The surface hydrophobicity was also decreased after processing. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) revealed that molecular weight distributions of WP varied from 10 to 80 kDa but those of LP were in 10 to 25 kDa. In the functional property analysis, greening process resulted in poor emulsifying ability for WP at pH 7.2, but led to an increase in water holding capacity (WHC). The proteomic analysis indicated that WP had numerous kinds of proteins and the vital alliinase in WP was lost in LP, and only 6 types of proteins were reserved. The proteins in WP were presumably degraded into peptides in LP. This study firstly applied proteomic analysis to investigate the protein differences in garlic processing, and based on the significant properties difference, WP might be a promising agent for additives in food industry, while LP might be a potential source for bioactive peptides extraction and separation.

Bioactive Peptide Fractions from Collagen Hydrolysate of Common Carp Fish Byproduct: Antioxidant and Functional Properties

Collagen isolated from byproducts of common carp was hydrolyzed with alcalase enzyme to obtain peptide fractions. The resulting >30 kDa (PF1), 10−30 kDa (PF2), 3−10 kDa (PF3) and <1 kDa (PF4) fractions were studied for their antioxidant and functional properties. All peptide fractions illustrated antioxidant activity at different concentrations (1, 5, and 10 mg/mL). Although PF4 indicated the highest DPPH radical-scavenging activity (87%) at a concentration of 1 mg/mL, the highest reducing power (0.34) and hydroxyl radical scavenging activity (95.4%) were also observed in PF4 at a concentration of 10 mg/mL. The solubility of the peptide fractions was influenced by pH. The lowest solubility of the peptide fractions was observed at pH 4. The highest emulsifying activity index (EAI) was observed for PF4 (121.1 m2/g), followed by PF3 (99.6 m2/g), PF2 (89.5 m2/g) and PF1 (78.2 m2/g). In contrast to what has been found in the case of EAI, the emulsion stability of the peptide fractions decreased at lower molecular weight, which ranged from 24.4 to 31.6 min. Furthermore, it was revealed that PF1 had the highest foam capacity (87.4%) and foam stability (28.4 min), followed by PF2 and PF3. Overall, the findings suggest that peptide fractions isolated from byproducts of common carp are a promising source of natural antioxidants for application in functional food and pharmaceutical products.

Tailoring protein intrinsic charge by enzymatic deamidation for solubilizing chicken breast myofibrillar protein in water

Inspired by the salt-in effect, the potential use of protein-glutaminase (PG) to increase the intrinsic charges of chicken breast myofibrillar proteins (CMPs) for enhanced water solubility was tested. The degree of deamidation (DD) and solubility of CMPs increased with PG reaction time. Over 60% of CMPs were soluble in water under a DD of 6.5% due to specific conversion of glutamine to glutamic acid. PG deamidation could remarkably increase the net charge of CMPs with a merit in maintaining most of the amino acid and protein subunit compositions. Such a high electrostatic repulsion exerted a transformation of β-sheet into α-helix, unfolded the structure to expose hydrophobic residues, and allowed the dissociation of myofibril and release of subunits (myosin, actin or their oligomers), leading to a stable colloidal state. This work may foster the engineering advances of protein micro-modification in the tailor manufacture of muscle protein-based beverages.

Quality, Key Production Factors, and Consumption Volume of Niche Edible Oils Marketed in the European Union

Consumer’s awareness of the health-promoting aspects of food and their search for products with high nutritional value is driving increased interest in niche oils. Such oils are produced on a small scale due to limited access to raw material and its low oil content. The aim of this multi-criteria analysis was to position niche oils. Data for the study were collected based on a literature review regarding twenty-three niche oils available on the European Union market. Analysis of quality parameters, key production factors, waste reusability, and average annual consumption volume in 2015–2020 was performed. Based on the research, it was concluded that linseed (flaxseed) oil, hemp oil, mustard oil, raspberry seed oil, and sesame oil should be of the most interest to consumers. They are characterized by the highest content of tocopherols, sterols, polyphenols, and carotenoids, a favorable ratio of mono- and polyunsaturated fatty acids, and pro-ecological and sustainable production technology. Based on the results of the study, the need for empirical research was identified, the key to filling the knowledge gaps in the area of edible niche oils.

Faba bean protein: A promising plant-based emulsifier for improving physical and oxidative stabilities of oil-in-water emulsions

Faba bean is a protein-rich, sustainable, but understudied legume. Faba bean protein isolates (FBPIs) can serve as promising emulsifiers. This review aims to summarize the research on FBPIs as emulsifiers and various modification methods to improve the emulsifying functionalities. The emulsifying activities of FBPIs depend on several physiochemical characteristics (e.g. solubility, surface hydrophobicity, surface charge, interfacial activity). Physical modifications, especially via linking FBPIs electrostatically to polysaccharides can effectively increase the interfacial layer thickness/compactness and maintain the interfacial protein adsorption. Chemical modifications of FBPIs (e.g. acetylation and Maillard reaction) could improve the interfacial activity and affect the droplet-size distribution. Enzymatic modifications, usually either via hydrolysis or cross-linking, help to optimize the molecular size, solubility, and surface hydrophobicity of FBPIs. It is critical to consider the lipid/protein oxidative stability and physical stability when optimizing the emulsifying functionality of FBPIs. With suitable modifications, FBPI can serve as a promising emulsifier in food production.

Modification of functional properties of perilla protein isolate by high-intensity ultrasonic treatment and the stability of o/w emulsion

This study investigated the effects of ultrasonic treatment on the structural characteristics and functional properties of perilla protein isolate (PPI). Besides, the performance of the emulsions stabilized by ultrasonic-treated PPI was analyzed, aiming at exploring the potential mechanism of ultrasonic technology to improve emulsion stability. Results showed that ultrasonic treatment reduced the particle size, induced the exposure of hydrophobic groups and changes in the secondary structure and tertiary conformation of PPI. However, the molecular weight and the crystalline regions were remained unchanged. Apart from this, ultrasonic treatment improved the solubility, water/oil holding capacity, foaming and emulsifying capacity of PPI. Furthermore, the emulsions prepared by ultrasonic-treated PPI possessed the highest stability, which might be due to the smaller droplets size and reduced droplets attraction by higher proportion of interfacial adsorbed protein. This findings will provide a new insight into the application of ultrasonic to improve the stability of PPI-stabilized emulsions.

Valorization of Wastewater from Table Olives: NMR Identification of Antioxidant Phenolic Fraction and Microwave Single-Phase Reaction of Sugary Fraction

The table olive industry is producing a huge amount of wastewater, which is a post-processing cost and an environmental concern. The present study aims to valorize this processing by-product to obtain a value-added product, thereby enhancing resource efficiency and contributing to achieving sustainable development goals (SDGs). In this sense, a chemical reaction-based platform was developed to obtain valuable components, such as levulinic acid (LA) and 5-hydromethylfurfural (HMF). The products were then analyzed using NMR identification of the antioxidant phenolic fraction and microwave single-phase reaction of the sugary fraction. According to the results, the highest concentration of phenolic compounds does not correspond to the sample directly obtained from NaOH treatment (S1), indicating that water washing steps (S2–S5) are fundamental to recover phenolic substances. Moreover, glucose was presented in the sugary fraction that can be transformed into levulinic acid by a single-phase reaction under microwave irradiation. The information provided in this manuscript suggests that the wastewater from the olive processing industry can be valorized to obtain valuable products.

Ultrasound, infrared and its assisted technology, a promising tool in physical food processing: A review of recent developments

Traditional food processing techniques can no longer meet the ever increasing demand for high quality food across the globe due to its low process efficiency, high energy consumption and low product yield. This review article is focused on the mechanism and application of Infrared (IR) and ultrasound (US) technologies in physical processing of food. We herein present the individual use of IR and US (both mono-frequency and multi-frequency levels) as well as IR and US supported with other thermal and non-thermal technologies to improve their food processing performance. IR and US are recent thermal and non-thermal technologies which have now been successfully used in food industries to solve the demerits of conventional processing technologies. These environmentally-friendly technologies are characterized by low energy consumption, reduced processing time, high mass-transfer rates, better nutrient retention, better product quality, less mechanical damage and improved shelf life. This work could be, with no doubt, useful to the scientific world and food industries by providing insights on recent advances in the use of US and IR technology, which can be applied to improve food processing technologies for better quality and safer products.

Modulation of the structural and functional properties of perilla protein isolate from oilseed residues by dynamic high-pressure microfluidization

Dynamic high-pressure microfluidization (DHPM) is an alternative method to physically modify proteins to improve their functional properties. In this study, perilla protein isolate (PPI) was treated by DHPM at different pressures. Results showed that DHPM treatment reduced the particle size and absolute potential of PPI by 75.90% and 22.28%. The increased surface hydrophobicity and free sulfhydryl content were observed in DHPM-treated PPI, which may be caused by the comformation changes of PPI. Furthermore, DHPM treatment would not cause the degradation of the main subunits and the variation of crystalline regions in PPI, but enhancing the thermal stability of PPI at 90 MPa and 120 MPa. Functional properties analysis indicated that DHPM treatment at 120 MPa was more effective in improving the solubility, foaming and emulsifying capacities of PPI. The results suggested that DHPM can be used to enhance the functional properties of PPI and expand its application in food systems.