Simvastatin-loaded solid lipid nanoparticles for enhanced anti-hyperlipidemic activity in hyperlipidemia animal model

Pharmacodynamic Studies of Pravastatin Sodium Nanoemulsion Loaded Transdermal Patch for Treatment of Hyperlipidemia

Pravastatin sodium (PVS) is a hypolipidemic drug with poor oral bioavailability due to the first-pass effect. Therefore, this study aims to formulate and evaluate transdermal patches containing PVS-loaded nanoemulsions (PVS-NEs) to increase PVS's hypolipidemic and hepatoprotective activities. PVS-NEs were prepared using the aqueous titration method, where oleic acid was chosen as an oil phase, and span 80 and tween 80 were used as surfactant and cosurfactant respectively. Droplet size (DS), polydispersity index (PDI), zeta potential (ZP), clarity, and thermodynamic stability of NEs were all characterized. Also, PVS-NEs (NE2) with 50% oil phase, 40% SC mix 2:1, and 10% water were selected as an optimum formula based on the results of DS (251 ± 16), PDI (0.4 ± 0.16), and ZP (-70 ± 10.4) to be incorporated into a transdermal patch, and PVS-NE2 loaded transdermal patches (PVS-NE2-TDPs) were prepared by solvent evaporation method. F1 patch with HPMC E15 and PVP K30 in a ratio of 3:1 represented satisfactory patch properties with good drug-excipients compatibility. Thus, it was selected as an optimum patch formula. The optimized F1 patch was characterized for thickness, moisture content, weight variation, and drug-excipients incompatibility. Therefore, it was subjected to ex vivo skin permeation and finally pharmacodynamic studies. Ex vivo permeation studies of F1 revealed that the cumulative amount of PVS permeated across rat skin was 271.66 ± 19 µg/cm2 in 72 h, and the pharmacodynamic studies demonstrated that the F1 patch was more effective in treating hyperlipidemia than PVS-TDP (control patch) based on both blood analysis and histopathological examination. .

Assessment of In Vitro Release Testing Methods for Colloidal Drug Carriers: The Lack of Standardized Protocols

Although colloidal carriers have been in the pipeline for nearly four decades, standardized methods for testing their drug-release properties remain to be established in pharmacopeias. The in vitro assessment of drug release from these colloidal carriers is one of the most important parameters in the development and quality control of drug-loaded nano- and microcarriers. This lack of standardized protocols occurs due to the difficulties encountered in separating the released drug from the encapsulated one. This review aims to compare the most frequent types of release testing methods (i.e., membrane diffusion techniques, sample and separate methods and in situ detection techniques) in terms of the advantages and disadvantages of each one and of the key parameters that influence drug release in each case.

Sodium alginate-based smart gastro-retentive drug delivery system of revaprazan loaded SLNs; Formulation and characterization

Revaprazan (REV), a novel reversible Proton Pump Inhibitor (PPI) used to treat peptic ulcers, faces challenges in therapeutic efficacy due to its poor dissolution properties and a short half-life. Solid lipid nanoparticles (SLNs) have emerged as a drug delivery system capable of enhancing dissolution and bioavailability of lipid soluble drugs. Here, we report on the development and optimization of a smart gastro-retentive raft system of REV-loaded SLNs (GRS/REV-SLNs) to enhance drug bioavailability and gastric retention. The optimized REV-SLNs had a particle size of 120 nm, a Polydispersity Index (PDI) of 0.313, a zeta potential of -20.7 mV, and efficient drug incorporation of 88 %. Transmission Electron Microscopy (TEM) affirmed the spherical morphology of these REV-SLNs, while Fourier Transform Infrared Spectroscopy (FTIR) revealed no chemical interactions among components. In-vitro assessment of the final GRS/REV-SLNs demonstrated sustained gelation and buoyancy for over 12 h, which would significantly enhance REV retention and its release within the stomach. Further assessments in rats confirmed successful gel transformation within the stomach, resulting in the improved bioavailability of REV. Thus, the development of GRS/REV-SLNs significantly improved the delivery and bioavailability of REV within the stomach, and offers a potentially improved method of treating peptic ulcers.

Metformin HCl-loaded transethosomal gel; development, characterization, and antidiabetic potential evaluation in the diabetes-induced rat model

Herein we designed, optimized, and characterized the Metformin Hydrochloride Transethosomes (MTF-TES) and incorporate them into Chitosan gel to develop Metformin Hydrochloride loaded Transethosomal gel (MTF-TES gel) that provides a sustained release, improved transdermal flux and improved antidiabetic response of MTF. Design Expert® software (Ver. 12, Stat-Ease, USA) was applied for the statistical optimization of MTF-TES. The formulation with Mean Particle Size Distribution (MPSD) of 165.4 ± 2.3 nm, Zeta Potential (ZP) of -21.2 ± 1.9 mV, Polydispersity Index (PDI) of 0.169 ± 0.033, and MTF percent Entrapment Efficiency (%EE) of 89.76 ± 4.12 was considered to be optimized. To check the chemical incompatibility among the MTF and other formulation components, Fourier Transform Infrared (FTIR) spectroscopy was performed and demonstrated with no chemical interaction. Surface morphology, uniformity, and segregation were evaluated through Transmission Electron Microscopy (TEM). It was revealed that the nanoparticles were spherical and round in form with intact borders. The fabricated MTF-TES has shown sustained release followed by a more pronounced effect in MTF-TES gel as compared to the plain MTF solution (MTFS) at a pH of 7.4. The MTF-TES has shown enhanced permeation followed by MTF-TES gel as compared to the MTFS at a pH of 7.4. In vivo antidiabetic assay was performed and results have shown improved antidiabetic potential of the MTF-TES gel, in contrast to MTF-gel. Conclusively, MTF-TES is a promising anti-diabetic candidate for transdermal drug delivery that can provide sustained MTF release and enhanced antidiabetic effect.

Assembly of nanostructured lipid carriers loaded gefitinib and simvastatin as hybrid therapy for metastatic breast cancer: Codelivery and repurposing approach

Breast cancer represents a life-threatening problem globally. The major challenge in the clinical setting is the management of cancer resistance and metastasis. Hybrid therapy can affect several cellular targets involved in carcinogenesis with a lessening of adverse effects. Therefore, the current study aims to assemble, and optimize a hybrid of gefitinib (GFT) and simvastatin (SIM)-loaded nanostructured lipid carrier (GFT/SIM-NLC) to combat metastatic and drug-resistant breast cancer. GFT/SIM-NLC cargos were prepared using design of experiments to investigate the impact of poloxamer-188 and fatty acids concentrations on the physicochemical and pharmaceutical behavior properties of NLC. Additionally, the biosafety of the prepared GFT/SIM-NLC was studied using a fresh blood sample. Afterward, the optimized formulation was subjected to an MTT assay to study the cytotoxic activity of GFT/SIM-NLC compared to free GFT/SIM using an MCF-7 cell line as a surrogate model for breast cancer. The present results revealed that the particle size of the prepared NLC ranged from (209 to 410 nm) with a negative zeta potential value ranging from (-17.2 to -23.9 mV). Moreover, the optimized GFT/SIM-NLC formulation showed favorable physicochemical properties and promising lymphatic delivery cargos. A biosafety study indicates that the prepared NLC has a gentle effect on erythrocyte hemolysis. Cytotoxicity studies revealed that GFT/SIM-NLC enhanced the killing of the MCF-7 cell line compared to free GFT/SIM. This study concluded that the hybrid therapy of GFT/SIM-NLC is a potential approach to combat metastatic and drug-resistant breast cancer.

Development of Chitosan/Sodium Carboxymethylcellulose Complexes to Improve the Simvastatin Release Rate: Polymer/Polymer and Drug/Polymer Interactions' Effects on Kinetic Models

Simvastatin (SIM) is a potent lipid-lowering drug used to control hyper-cholesterolemia and prevent cardiovascular diseases. SIM presents low oral bioavailability (5%) because of its low aqueous solubility. In this work, polyelectrolyte complexes (PEC) are developed with different chitosan (CS) and carboxymethylcellulose (CMC) ratios that will allow for an increase in the SIM dissolution rate (2.54-fold) in simulated intestinal medium (pH 4.5). Scanning Electron Microscopy (SEM) images revealed highly porous structures. The changes between both complexes, PEC-SIM:CS:CMC (1:1:2) and (1:2:1), were related to the relaxation of the polymer chains upon absorption of the dissolution medium. Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and powder X-ray diffraction (XRPD) studies were used to evaluate the polymer/polymer and drug/polymer interactions on the different PEC-SIM:CS:CMC ratios. In addition, the PEC-SIM:CS:CMC (1:2:1) complex exhibited a high ratio of protonated amino groups (NH3+) and an increase in intramolecular hydrogen bonds, which were correlated with a high expansion of the interpolymer chains and an increase in the SIM dissolution rate. Different kinetic models such as zero-order, first-order, Higuchi and Korsmeyer-Peppas were studied to evaluate the influence of CS/CMC ionic interactions on the ability to improve the release rate of poorly soluble drugs.

Formulation and evaluation of simvastatin cubosomal nanoparticles for assessing its wound healing effect

Wound healing is one of the most challenging medical circumstances for patients. Pathogens can infect wounds, resulting in tissue damage, inflammation, and disruption of the healing process. Simvastatin was investigated recently, as a wound healing agent that may supersede the present therapies for wounds. Our goal in this paper is to focus on formulation of simvastatin cubosomes for topical delivery, as a potential approach to improve simvastatin skin permeation. By this technique its wound healing effect could be improved. Cubosomes were prepared using the top-down method and the prepared cubosomes were characterized by several techniques. The most optimal simvastatin cubosomal formulation was then included in a cubogel dosage form using different gelling agents. The results showed that the average particle size of the prepared cubosomes was 113.90 ± 0.58 nm, the entrapment efficiency was 93.95 ± 0.49% and a sustained simvastatin release was achieved. The optimized formula of simvastatin cubogel displayed pseudoplastic rheological behavior. This same formula achieved enhancement in drug permeation through excised rat skin compared to free simvastatin hydrogel with flux values of 46.18 ± 2.12 mcg cm-2 h-1 and 25.92 ± 3.45 mcg cm-2 h-1 respectively. Based on the in-vivo rat studies results, this study proved a promising potential of simvastatin cubosomes as wound healing remedy.

Enhanced cardioprotective activity of ferulic acid-loaded solid lipid nanoparticle in an animal model of myocardial injury

Myocardial infarction results in an increased inflammatory and oxidative stress response in the heart, and reducing inflammation and oxidative stress after MI may offer protective effects to the heart. In the present study, we examined the cardioprotective effects of ferulic acid (FA) and ferulic acid nanostructured solid lipid nanoparticles (FA-SLNs) in an isoproterenol (ISO) induced MI model. Male Sprague Dawley rats were divided into five experimental groups to compare the effects of FA and FA-SLNs. The findings revealed that ISO led to extensive cardiomyopathy, characterized by increased infarction area, edema formation, pressure load, and energy deprivation. Additionally, ISO increased the levels of inflammatory markers (COX-2, NLRP3, and NF-кB) and apoptotic mediators such as p-JNK. However, treatment with FA and FA-SLNs mitigated the severity of the ISO-induced response, and elevated the levels of antioxidant enzymes while downregulating inflammatory pathways, along with upregulation of the mitochondrial bioenergetic factor PPAR-γ. Furthermore, virtual docking analysis of FA with various protein targets supported the in vivo results, confirming drug-protein interactions. Overall, the results demonstrated that FA-SLNs offer a promising strategy for protecting the heart from further injury following MI. This is attributed to the improved drug delivery and therapeutic outcomes compared to FA alone.

Melatonin delivered in solid lipid nanoparticles ameliorated its neuroprotective effects in cerebral ischemia

The current study explores the potential of melatonin (MLT)-loaded solid lipid nanoparticles (MLT-SLNs) for better neuroprotective effects in ischemic stroke. MLT-SLNs were prepared using lipid matrix of palmityl alcohol with a mixture of surfactants (Tween 40, Span 40, Myrj 52) for stabilizing the lipid matrix. MLT-SLNs were tested for physical and chemical properties, thermal and polymorphic changes, in vitro drug release and in vivo neuroprotective studies in rats using permanent middle cerebral artery occlusion (p-MCAO) model. The optimized MLT-SLNs showed particle size of ∼159 nm, zeta potential of -29.6 mV and high entrapment efficiency ∼92%. Thermal and polymorphic studies showed conversion of crystalline MLT to amorphous form after its entrapment in lipid matrix. MLT-SLNs displayed a sustained release pattern compared to MLT dispersion. MLT-SLNs significantly enhanced the neuroprotective profile of MLT ascertained by reduced brain infarction, recovered behavioral responses, low expression of inflammatory markers and improved oxidation protection in rats. MLT-SLNs also showed reduced hepatotoxicity compared to p-MCAO. From these outcomes, it is evidenced that MLT-SLNs have improved neuroprotection as compared to MLT dispersion and thereby present a promising approach to deliver MLT to the brain for better therapeutic outcomes in ischemic stroke.

Rivaroxaban-loaded SLNs with treatment potential of deep vein thrombosis: in-vitro, in-vivo, and toxicity evaluation

OBJECTIVES

Rivaroxaban (RXB), a novel Xa inhibitor having groundbreaking therapeutic potential. However, this drug is associated with few limitations, including its pharmacokinetics related toxicities. Here, we developed RXB-loaded SLNs (RXB-SLNs) to improve its biopharmaceutical profile. Methods: High pressure homogenizer was used to prepare RXB-SLNs, followed by their particle characterization, Transmission electron microscopy (TEM), Dynamic light scattering (DSC), and Powder X-ray diffraction (PXRD) analysis. Beside this, in-vitro, ex-vivo, and in-vivo evaluation, prothrombin time assessment and toxicity was investigated.

RESULTS

RXB-SLNs had their particle size in nano range (99.1 ± 5.50 nm) with excellent morphology and low polydispersity index (0.402 ± 0.02) and suitable zeta potential (-25.9 ± 1.4 mV). The incorporation efficiency was observed around 95.9 ± 3.9%. In-vitro release profiles of the RXB-SLNs exhibited enhanced dissolution (89 ± 9.91%) as compared to pure drug (11 ± 1.43%) after 24 h of the study. PK study demonstrated a seven times enhanced bioavailability of RXB-SLNs when compared with pure drug. Furthermore, RXB-SLNs exhibited an expressive anti-coagulant behavior in human and rat blood plasma. Also, the final formulation exhibited no toxicity after oral administration of the SLNs.

CONCLUSIONS

All together, these studies revealed the capability of the SLNs for carrying the RXB with enhanced therapeutic efficacy and no toxicity, most importantly for the treatment of deep vein thrombosis.

Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) Prepared by Microwave and Ultrasound-Assisted Synthesis: Promising Green Strategies for the Nanoworld

Many pharmaceutically active molecules are highly lipophilic, which renders their administration and adsorption in patients extremely challenging. Among the countless strategies to overcome this problem, synthetic nanocarriers have demonstrated superb efficiency as drug delivery systems, since encapsulation can effectively prevent a molecules' degradation, thus ensuring increased biodistribution. However, metallic and polymeric nanoparticles have been frequently associated with possible cytotoxic side effects. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC), which are prepared with physiologically inert lipids, therefore emerged as an ideal strategy to bypass toxicities issues and avoid the use of organic solvents in their formulations. Different approaches to preparation, using only moderate amounts of external energy to facilitate a homogeneous formation, have been proposed. Greener synthesis strategies have the potential to provide faster reactions, more efficient nucleation, better particle size distribution, lower polydispersities, and furnish products with higher solubility. Particularly microwave-assisted synthesis (MAS) and ultrasound-assisted synthesis (UAS) have been utilized in the manufacturing of nanocarrier systems. This narrative review addresses the chemical aspects of those synthesis strategies and their positive influence on the characteristics of SLNs and NLCs. Furthermore, we discuss the limitations and future challenges for the manufacturing processes of both types of nanoparticles.

Solid lipid nanoparticles cyclodextrin-decorated incorporated into gellan gum-based dry floating in situ delivery systems for controlled release of bioactive compounds of safflower (Carthamus tinctorius. L): A proof of concept study in biorelevant media

Safflower (Carthamus tinctorius L.) has been explored as a source of natural antioxidant. However, quercetin 7-O-beta-D-glucopyranoside and luteolin 7-O-beta-D-glucopyranoside, as its bioactive compounds, possessed poor aqueous solubility, limiting its efficacy. Here, we developed solid lipid nanoparticles (SLNs) decorated with hydroxypropyl beta-cyclodextrin (HPβCD) incorporated into dry floating gel in situ systems to control the release of both compounds. Using Geleol® as a lipid matrix, SLNs were <200 nm in size with >80 % of encapsulation efficiency. Importantly, following the decoration using HPβCD, the stability of SLNs in gastric environment was significantly improved. Furthermore, the solubility of both compounds was also enhanced. The incorporation of SLNs into gellan gum-based floating gel in situ provided desired flow and floating properties, with <30 s gelation time. The floating gel in situ system could control the release of bioactive compounds in FaSSGF (Fasted-State Simulated Gastric Fluid). Furthermore, to assess the effect of food intake on release behavior, we found that the formulation could show a sustained release pattern in FeSSGF (Fed-State Simulated Gastric Fluid) for 24 h after being released in FaSGGF for 2 h. This indicated that this combination approach could be a promising oral delivery for bioactive compounds in safflower.

Transdermal delivery of allopurinol-loaded nanostructured lipid carrier in the treatment of gout

BACKGROUND

Allopurinol (ALP), a xanthine oxidase inhibitor, is a first line drug for the treatment of gout and hyperuricemia. Being the member of BCS class II drugs, ALP has solubility problem, which affects its bioavailability. Also, ALP has shorter half-life and showed GI related problems. In present study, ALP was encapsulated in nanostructured lipid carriers (NLCs) to ensure enhanced bioavailability, improved efficacy and safety in vivo.

METHODOLOGY

ALP-loaded NLCs were fabricated by micro-emulsion technique. The prepared NLCs were optimized via design expert in term of particle size, zeta potential and entrapment efficiency. FTIR, PXRD and TEM analysis were carried out to check chemical interaction, polymorphic form and surface morphology of the optimized formulation. ALP-loaded NLCs were then loaded into HPMC based poloxamer-407 gel and were characterized. In vitro and ex vivo analysis were carried out via dialysis membrane method and franz diffusion cell, respectively. Uric acid was used for induction of gout and the anti-gout activity of ALP-loaded NLCs gel was performed and compared with ALP suspension.

RESULTS

The optimized formulation had particles in nano-range (238.13 nm) with suitable zeta potential (-31.5 mV), poly-dispersity index (0.115) and entrapment of 87.24%. FTIR results confirmed absence of chemical interaction among formulation ingredients. XRD indicated amorphous nature of ALP-loaded NLCs, whereas TEM analysis confirmed spherical morphology of nanoparticles. The optimized formulation was successfully loaded in to gel and characterized accordingly. The in vitro release and drug release kinetics models showed sustained release of the drug from ALP-loaded NLCs gel. Furthermore, about 28 fold enhanced permeation was observed from ALP-loaded NLCs gel as compared to conventional gel. Skin irritation study disclosed safety of ALP-loaded NLCs gel for transdermal application. Furthermore, ALP-loaded NLCs gel showed significantly enhanced anti-gout activity in Sprague-Dawley rats after transdermal administration as compared to oral ALP suspension.

CONCLUSION

ALP-loaded NLCs gel after transdermal administration sustained the drug release, avoid gastrointestinal side effects and enhance the anti-gout performance of ALP. It can be concluded, that NLCs have the potential to deliver drugs via transdermal route as indicated in case of allopurinol.

Insights into the pivotal role of statins and its nanoformulations in hyperlipidemia

Hyperlipidemia is the primary cause of heart disorders and has been manifested as the condition with remarkable higher levels of very-low-density lipoproteins, low-density lipoproteins, intermediate-density lipoprotein, triglycerides, and cholesterol in blood circulation. Genetic causes or systemic metabolic illnesses like diabetes mellitus, increased alcohol consumption, hypothyroidism, and primary biliary cirrhosis are several reasons behind development of hyperlipidemia. Higher levels of lipids and lipoproteins in plasma are responsible for various health disorders in human body like occlusion of blood vessels, acute pancreatitis, and reduced artery lumen elasticity. Both primary and secondary prophylaxis of heart disease can be achieved through combination of pharmacologic therapy with therapeutic lifestyle adjustments. Statins which belongs to HMG-CoA reductase inhibitors are preferred for primary prevention of hyperlipidemia particularly for individuals at higher risk of development of heart disease. This review discusses the recent advancements and outcomes of nanoparticle drug carriers for statins in the therapy of hyperlipidemia.

Augmented Oral Bioavailability and Prokinetic Activity of Levosulpiride Delivered in Nanostructured Lipid Carriers

The present study is aimed to develop and optimize levosulpiride-loaded nanostructured lipid carriers (LSP-NLCs) for improving oral bioavailability and prokinetic activity of LSP. LSP-NLCs were optimized with D-optimal mixture design using solid lipid, liquid lipid and surfactant concentrations as independent variables. The prepared LSP-NLCs were evaluated for physicochemical properties and solid-state characterization. The in vivo oral pharmacokinetics and prokinetic activity of LSP-NLCs were evaluated in rats. LSP-NLCs formulation was optimized at Precirol® ATO 5/Labrasol (80.55/19.45%, w/w) and Tween 80/Span 80 concentration of 5% (w/w) as a surfactant mixture. LSP-NLCs showed a spherical shape with a particle size of 152 nm, a polydispersity index of 0.230 and an entrapment efficiency of 88%. The DSC and PXRD analysis revealed conversion of crystalline LSP to amorphous state after loading into the lipid matrix. LSP-NLCs displayed a 3.42- and 4.38-flods increase in AUC and Cmax after oral administration compared to LSP dispersion. In addition, LSP-NLCs showed enhanced gastric emptying (61.4%), intestinal transit (63.0%), and fecal count (68.8) compared to LSP dispersion (39.7%, 38.0% and 51.0, respectively). Taken together, these results show improved oral bioavailability and prokinetic activity of LSP-NLCs and presents a promising strategy to improve therapeutic activity of LSP for efficient treatment of gastric diseases.

Macrophage targeting of nitazoxanide-loaded transethosomal gel in cutaneous leishmaniasis

Topical delivery is preferable over systemic delivery for cutaneous leishmaniasis, because of its easy administration, reduced systemic adverse effects and low cost. Nitazoxanide (NTZ) has broad-spectrum activity against various parasites and has the potential to avoid drug resistance developed by enzymatic mutations. NTZ oral formulation is associated with severe dyspepsia and stomach pain. Herein, NTZ-transethosomes (NTZ-TES) were prepared and loaded into chitosan gel (NTZ-TEG) for topical delivery. NTZ-TES were prepared by the thin-film hydration method and optimized statistically via the Box-Behnken method. The optimized formulation indicated excellent particle size (176 nm), polydispersity index (0.093), zeta potential (-26.4 mV) and entrapment efficiency (86%). The transmission electron microscopy analysis showed spherical-sized particles and Fourier-transform infrared spectroscopy analysis indicated no interaction among the excipients. Similarly, NTZ-TEG showed optimal pH, desirable viscosity and good spreadability. NTZ-TES and NTZ-TEG showed prolonged release behaviour and higher skin penetration and deposition in the epidermal/dermal layer of skin in comparison with the NTZ-dispersion. Moreover, NTZ-TES showed higher percentage inhibition, lower half-maximal inhibitory concentration (IC₅₀) against promastigotes and higher macrophage uptake. Additionally, skin irritation and histopathology studies indicated the safe and non-irritant behaviour of the NTZ-TEG. The obtained findings suggested the enhanced skin permeation and improved anti-leishmanial effect of NTZ when administered as NTZ-TEG.

Macrophage targeting of nitazoxanide-loaded transethosomal gel in cutaneous leishmaniasis

Topical delivery is preferable over systemic delivery for cutaneous leishmaniasis, because of its easy administration, reduced systemic adverse effects and low cost. Nitazoxanide (NTZ) has broad-spectrum activity against various parasites and has the potential to avoid drug resistance developed by enzymatic mutations. NTZ oral formulation is associated with severe dyspepsia and stomach pain. Herein, NTZ-transethosomes (NTZ-TES) were prepared and loaded into chitosan gel (NTZ-TEG) for topical delivery. NTZ-TES were prepared by the thin-film hydration method and optimized statistically via the Box-Behnken method. The optimized formulation indicated excellent particle size (176 nm), polydispersity index (0.093), zeta potential (-26.4 mV) and entrapment efficiency (86%). The transmission electron microscopy analysis showed spherical-sized particles and Fourier-transform infrared spectroscopy analysis indicated no interaction among the excipients. Similarly, NTZ-TEG showed optimal pH, desirable viscosity and good spreadability. NTZ-TES and NTZ-TEG showed prolonged release behaviour and higher skin penetration and deposition in the epidermal/dermal layer of skin in comparison with the NTZ-dispersion. Moreover, NTZ-TES showed higher percentage inhibition, lower half-maximal inhibitory concentration (IC₅₀) against promastigotes and higher macrophage uptake. Additionally, skin irritation and histopathology studies indicated the safe and non-irritant behaviour of the NTZ-TEG. The obtained findings suggested the enhanced skin permeation and improved anti-leishmanial effect of NTZ when administered as NTZ-TEG.

Macrophage targeting of nitazoxanide-loaded transethosomal gel in cutaneous leishmaniasis

Topical delivery is preferable over systemic delivery for cutaneous leishmaniasis, because of its easy administration, reduced systemic adverse effects and low cost. Nitazoxanide (NTZ) has broad-spectrum activity against various parasites and has the potential to avoid drug resistance developed by enzymatic mutations. NTZ oral formulation is associated with severe dyspepsia and stomach pain. Herein, NTZ-transethosomes (NTZ-TES) were prepared and loaded into chitosan gel (NTZ-TEG) for topical delivery. NTZ-TES were prepared by the thin-film hydration method and optimized statistically via the Box-Behnken method. The optimized formulation indicated excellent particle size (176 nm), polydispersity index (0.093), zeta potential (-26.4 mV) and entrapment efficiency (86%). The transmission electron microscopy analysis showed spherical-sized particles and Fourier-transform infrared spectroscopy analysis indicated no interaction among the excipients. Similarly, NTZ-TEG showed optimal pH, desirable viscosity and good spreadability. NTZ-TES and NTZ-TEG showed prolonged release behaviour and higher skin penetration and deposition in the epidermal/dermal layer of skin in comparison with the NTZ-dispersion. Moreover, NTZ-TES showed higher percentage inhibition, lower half-maximal inhibitory concentration (IC₅₀) against promastigotes and higher macrophage uptake. Additionally, skin irritation and histopathology studies indicated the safe and non-irritant behaviour of the NTZ-TEG. The obtained findings suggested the enhanced skin permeation and improved anti-leishmanial effect of NTZ when administered as NTZ-TEG.

Improved biopharmaceutical performance of antipsychotic drug using lipid nanoparticles via intraperitoneal route

This study aims to develop, characterize, and examine olanzapine-loaded solid lipid nanocarriers (OLAN-SLNs) for effective brain delivery. OLAN has poor water solubility and low penetration through blood-brain barrier (BBB). Herein, OLAN-SLNs were fabricated using high-pressure homogenization (HPH) method followed by their investigation for particle properties. Moreover, in vitro release and in vivo pharmacokinetics profiles of OLAN-SLNs were compared with pure drug. Anti-psychotic activity was performed in LPS-induced psychosis mice model. Furthermore, expressions of the COX-2 and NF-κB were measured trailed by histopathological examination. The optimized formulation demonstrated nanoparticle size (149.1 nm) with rounded morphology, negative zeta potential (-28.9 mV), lower PDI (0.334), and excellent entrapment efficiency (95%). OLAN-SLNs significantly retarded the drug release and showed sustained release pattern as compared to OLAN suspension. Significantly enhanced bioavailability (ninefold) was demonstrated in OLAN-SLNs when compared with OLAN suspension. Behavioral tests showed significantly less immobility and more struggling time in OLAN-SLNs treated mice group. Additionally, reduced expression of COX-2 and -NF κB in brain was found. Altogether, it can be concluded that SLNs have the potential to deliver active pharmaceutical ingredients to brain, most importantly to enhance their bioavailability and antipsychotic effect, as indicated for OLAN in this study.

Tackling Dyslipidemia in Obesity from a Nanotechnology Perspective

Obesity and dyslipidemia are the main features of metabolic syndrome, expressed mainly by adipose tissue dysfunction and connected by similar pathways and pharmacotherapy. Conventional drugs used in these two associated disorders are limited due to poor drug efficiency, non-specificity, and toxic side effects. Therefore, novel solutions for tackling obesity-associated diseases and providing insights into the development of innovative or improved therapies are necessary. Targeted nanotherapy is a revolutionary technology, offering a promising solution for combatting the disadvantages of currently available therapies for treating obesity and dyslipidemia due to its superior features, which include specific cell targeting, the protection of drugs against physiological degradation, and sustained drug release. This review presents a brief assessment of obesity and dyslipidemia, their impacts on human health, current treatment, and limitations, and the role and potential use of nanotechnology coupled with targeted drug delivery and nutraceuticals as emerging therapies. To the best of our knowledge, this paper presents, for the first time in the literature, a comparison between obesity and dyslipidemia nano-formulations based on drugs and/or natural extracts applied in experimental studies.

Simvastatin-loaded nano-niosomes efficiently downregulates the MAPK-NF-κB pathway during the acute phase of myocardial ischemia-reperfusion injury

BACKGROUND

Simvastatin can potentially mitigate acute inflammatory phase of myocardial ischemia-reperfusion injury. However, these effects negatively influenced by its poor bioavailability, low water solubility and high metabolism. Here, we investigated the effects of SIM-loaded nano-niosomes on a rat model of MI/R injury to find a drug delivery method to tackle the barriers.

METHODS

Nano-niosomes' characteristics were identified using dynamic light scattering and transmission electron microscopy. Fifty male Wistar rats were divided into five groups: Sham; MI/R; MI/R + nano-niosome; MI/R + SIM; MI/R + SIM-loaded nano-niosomes. Left anterior descending artery was ligated for 45 min, and 3 mg/kg SIM, nano-niosomes, or SIM-loaded nano-niosomes was intramyocardially injected ten min before the onset of reperfusion. ELISA assay was used to assess cardiac injury markers (cTnI, CK-MB) and inflammatory cytokines (TNF-α, IL-6, TGF-β, MPC-1). Expression level of MAPK-NF-κB and histopathological changes were evaluated by western blot and hematoxylin & eosin staining, respectively.

RESULTS

the size of nano-niosome was 137 nm, reached to 163 nm when simvastatin was loaded. To achieve optimized niosomes span 80, a drug/cholesterol ratio of 0.4 and seven min of sonication time was applied. Optimized entrapment efficiency of SIM-loaded nano-niosomes was 98.21%. Inflammatory cytokines and the expression level of MAPK and NF-κB were reduced in rats receiving SIM-loaded nano-niosomes compared to MI/R + SIM and MI/R + SIM-loaded nano-niosomes.

CONCLUSION

Our results showed that SIM-loaded nano-niosomes could act more efficiently than SIM in alleviating the acute inflammatory response of reperfusion injury via downregulating the activation of MAPK-NF-κB.

Controlled therapeutic delivery of CO from carbon monoxide-releasing molecules (CORMs)

Carbon monoxide (CO) has been regarded as a "silent killer" for its toxicity toward biological systems. However, a low concentration of endogenously produced CO has shown a number of therapeutic benefits such as anti-inflammatory, anti-proliferative, anti-apoptosis, and cytoprotective activities. Carbon monoxide-releasing molecules (CORMs) have been developed as alternatives to direct CO inhalation, which requires a specialized setting for strict dose control. CORMs are efficient CO donors, with central transition metals (such as ruthenium, iron, cobalt, and manganese) surrounded by CO as a ligand. CORMs can stably store and subsequently release their CO payload in the presence of certain triggers including solvent, light, temperature, and ligand substitution. However, CORMs require appropriate delivery strategies to improve short CO release half-life and target specificity. Herein, we highlighted the therapeutic potential of inhalation and CORMs-delivered CO. The applications of conjugate and nanocarrier systems for controlling CO release and improving therapeutic efficacy of CORMs are also described in detail. The review concludes with some of the hurdles that limit clinical translation of CORMs. Keeping in mind the tremendous potential and growing interest in CORMs, this review would be helpful for designing controlled CO release systems for clinical applications.

The influence on the oral bioavailability of solubilized and suspended drug in a lipid nanoparticle formulation: in vitro and in vivo evaluation

The present study investigated the oral bioavailability of celecoxib when incorporated into solid lipid nanoparticles either dissolved or suspended. In vitro drug release in different media, in vivo performance, and in vitro-in vivo correlation were conducted. The results revealed that the compound was successfully encapsulated into the nanocarriers with good physicochemical properties for oral administration. The in vitro release profiles followed the Weibull model, with significant differences between the formulations containing the solubilized and the suspended compound. Furthermore, in vitro release data could be used to rank the observed in vivo bioavailability. The relative bioavailability of celecoxib from the solid lipid nanoparticles was 2.5- and 1.8-fold higher for the drug solubilized and suspended solid lipid nanoparticle formulation, respectively, when compared to the celecoxib reference. A significant difference was observed between the plasma concentration-time profiles and pharmacokinetic parameters for the three investigated formulations. Finally, this investigation displayed promising outcomes that both solubilized and suspended celecoxib in the lipid core of the solid lipid nanoparticles offers the potential to improve the compound's oral bioavailability and thereby reduce the dosing frequency.

Formulation optimization, in vitro and in vivo evaluation of agomelatine-loaded nanostructured lipid carriers for augmented antidepressant effects

The present study was intended to prepare and optimize agomelatine-loaded nanostructured lipid carriers (AGM-NLCs) for augmented in vivo antidepressant potential. AGM-NLCs were optimized on several parameters including cumulative hydrophilic-lipophilic balance of surfactants, proportions of solid and liquid lipids, total amounts of drug and surfactants. AGM-NLCs were assessed for their physicochemical properties, in vitro AGM release and in vivo antidepressant effects in mice model. The optimized AGM-NLCs demonstrated spherical morphology with average particle size of 99.8 ± 2.6 nm, PDI of 0.142 ± 0.017, zeta potential of - 23.2 ± 1.2 mV and entrapment efficiency of 97.1 ± 2.1%. Thermal and crystallinity studies depict amorphous nature of AGM after its incorporation into NLCs. AGM-NLCs exhibit a sustained drug release profile after initial 2 h. Mice treated with AGM-NLCs exhibited reduced immobility time in behavioral analysis. Furthermore, cresyl violet staining demonstrated an improved neuronal morphology and survival in AGM-NLCs group. The concentrations and the expression of inflammatory markers (TNF-α and COX-2) in mice brain were significantly reduced by AGM-NLCs. Taken together, therapeutic effectiveness of AGM was markedly augmented in AGM-NLCs and thereby they could be promising nanocarriers for the effective delivery of antidepressants to brain.

Alginate nanocapsules by water-in-oil emulsification and external gelation for drug delivery to fine dust stimulated keratinocytes

Methodologies for synthesizing drug-loaded alginate nanocapsules were optimized and indomethacin and phloroglucinol loading capacities were studied. Their biological effects were studied for ameliorating fine dust (FD) induced detrimental effects in keratinocytes. The 1 % alginate to oil phase ratio of 1:20 was the optimal parameter for water in oil emulsification. The oil phase was optimized to contain sunflower oil: span 80 ratios of 17:3. Nanocapsule drug encapsulation efficiencies were 36.91 ± 5.56 and 32.41 ± 4.05 % respectively for phloroglucinol (EG2P) and indomethacin (EG2I) while the loading capacities were 25.28 ± 3.36 and 23.15 ± 2.84 %. Dried nanocapsules indicated a 40-140 nm diameter range while their hydrodynamic diameter was 989.69 nm at pH 7.0. Nanocapsules swelling was pH-dependent and in releasing media of pH values 4.5, 7.4, and 8.5, the drug release indicated a complex mechanism of swelling, diffusion, and erosion while at pH 2.0 the drug release followed the non-Fickian release. EG2P and EG2I treatment dose-dependently lowered FD-induced intracellular ROS production, apoptosis and inflammatory responses mediated through the NF-κB pathway in FD stimulated HaCaT keratinocytes and reduced epidermal barrier degradation. Further research could investigate the use of this technique in formulating cosmeceuticals containing drug-loaded alginate nanocapsules for achieving controlled release.

Nanostructured Lipid Carrier-Based Delivery of Pioglitazone for Treatment of Type 2 Diabetes

Pioglitazone (PGZ) is utilized as a therapeutic agent in the management of (type 2) diabetes to control blood glucose levels. The existing research work was intended to make and optimize PGZ-containing NLCs (nanostructured lipid carriers). The fabricated nanostructured lipid carrier preparation was optimized by using different concentrations of the surfactants (Tween 80 and Span 80) and solid lipid (Compritol^® 888 ATO) and liquid lipid (Labrasol^®) while keeping the concentration of drug (PGZ), and co-surfactants (poloxamer 188) the same. The optimized NLC formulation (PGZ-NLCs) was further assessed for physical and chemical characterization, in vitro PGZ release, and stability studies. The optimized PGZ-NLCs have shown an average diameter of 150.4 nm, EE of 92.53%, PDI value of 0.076, and zeta-potential of −29.1 mV, correspondingly. The DSC thermal analysis and XRD diffractograms had not presented the spectrum of PGZ, confirming the comprehensive encapsulation of PGZ in the lipid core. PGZ-NLCs showed significantly extended release (51% in 24 h) compared to the unformulated PGZ. Our study findings confirmed that PGZ-NLCs can be a promising drug delivery system for the treatment of type 2 diabetes.

A dose-related positive effect of inhaled simvastatin loaded PLGA nanoparticles on paraquat-induced pulmonary fibrosis in rats

OBJECTIVE

Pulmonary fibrosis is an important complication of subacute Paraquat (PQ) poisoning. Here, we reported a novel nanotherapeutic platform for paraquat (PQ)-induced pulmonary fibrosis in animal inhalation models using simvastatin (SV) loaded into Poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NPs).

METHODS & MATERIALS

Eight inhalations of normal saline, PQ (24mg/kg), PQ plus SV (20 mg/kg), PQ plus SV- loaded PLGA NPs at doses of 5, 10 or 20 mg/kg or PQ plus PLGA NPs were given to rats. After the end of the treatment period, inflammatory factors and creatine phosphokinase as well as lung pathological changes and tracheal responsiveness were evaluated.

RESULTS

Inhalation of simvastatin loaded PLGA NPs could significantly prevent the progression of PQ-induced pulmonary fibrosis especially at a dose of 10 mg through decreasing the serum level of inflammatory factors as well as contractile responses (P<0.001) compared to PQ group. Pathological findings also confirmed the results. However, inhalation of non-formulated SV could not prevent tissue damage and fibrosis.

CONCLUSION

Taken together, the present work provides us an idea about the pulmonary delivery of PLGA-SV NPs using nebulizer for the treatment of PQ poisoning. However, the efficacy of this formulation in humans and clinical use needs to be more investigated.

Targeted Strategy in Lipid-Lowering Therapy

Dyslipidemia is characterized by a diminished lipid profile, including increased level of total cholesterol and low-density lipoprotein cholesterol (LDL-c) and reduced level of high-density lipoprotein cholesterol (HDL-c). Lipid-lowering agents represent an efficient tool for the prevention or reduction of progression of atherosclerosis, coronary heart diseases and metabolic syndrome. Statins, ezetimibe, and recently proprotein convertase subtilisin/kexin type 9 (PCSK9) inhibitors are the most effective and used drugs in clinical lipid-lowering therapy. These drugs are mainly aimed to lower cholesterol levels by different mechanisms of actions. Statins, the agents of the first-line therapy—known as 3-hydroxy-3-methylglutaryl-CoA (HMG-CoA) reductase inhibitors—suppress the liver cholesterol synthesis. Ezetimibe as the second-line therapy can decrease cholesterol by inhibiting cholesterol absorption. Finally, the PCSK9 inhibitors act as an inducer of LDL excretion. In spite of their beneficial lipid-lowering properties, many patients suffer from their serious side effects, route of administration, or unsatisfactory physicochemical characteristics. Clinical demand for dose reduction and the improvement of bioavailability as well as pharmacodynamic and pharmacokinetic profile has resulted in the development of a new targeted therapy that includes nanoparticle carriers, emulsions or vaccination often associated with another more subtle form of administration. Targeted therapy aims to exert a more potent drug profile with lipid-lowering properties either alone or in mutual combination to potentiate their beneficial effects. This review describes the most effective lipid-lowering drugs, their favorable and adverse effects, as well as targeted therapy and alternative treatments to help reduce or prevent atherosclerotic processes and cardiovascular events.

Design and Evaluation of pH-Sensitive Nanoformulation of Bergenin Isolated from Bergenia ciliata

The aim of the current study is extraction and isolation of bergenin from Bergenia ciliata and fabrication of pH-sensitive Eudragit^® L100 (EL100) polymeric nanoparticles (NP) to tackle limitations of solubility. Bergenin-loaded EL100 nanoparticles (BN-NP) were fabricated via nanoprecipitation and an experimental design was conducted for optimization. A reverse phase-high performance liquid chromatography (RP-HPLC) method was developed for the quantitation of bergenin. The optimized nanoformulation was characterized by its particle size, morphology, loading capacity, entrapment efficiency, drug-excipient interaction and crystallinity. An in vitro assay was executed to gauge the release potential of pH-sensitive nanoformulation. The mean particle size, zeta potential and polydispersity index (PDI) of the optimized nanoparticles were observed to be 86.17 ± 2.1 nm, -32.33 ± 5.53 mV and 0.30 ± 0.03, respectively. The morphological analysis confirmed the spherical nature of the nanoparticles. Drug loading capacity and entrapment efficiency were calculated to be 16 ± 0.34% and 84 ± 1.3%, respectively. Fourier transform infrared spectroscopy (FTIR) studies unfolded that no interaction was present between the drug and the excipients in the nanoformulation. Crystallography studies revealed that the crystalline nature of bergenin was changed to amorphous and the nanoformulation was stable for up to 3 months at 40 °C. The present study confirms that bergenin isolation can be scaled up from abundantly growing B. ciliata. Moreover, it could also be delivered by entrapment in stimuli-responsive polymer, preventing the loss of drug in healthy tissues.

Preparation of microspheres by alginate purified from Sargassum horneri and study of pH-responsive behavior and drug release

Alginate is a biopolymer used in numerous biomedical applications. The current work describes the purification of alginate from Sargassum horneri and method optimization for formulating drug-loaded microparticles by water-in-oil emulsification/internal gelation. Molecular weights of S. horneri alginate were ranging 50-70 kDa. Among 16 method optimizations, the F4 method was selected for further studies based on shape descriptor parameters which indicated, 0.24 ± 0.01 circularity, 0.80 ± 0.11 roundness, 1.27 ± 0.20 aspect ratio between long and short axis, and less aggregation in PBS. Processing parameters of the F4 method were; CaCO3/alginate ratio of 20/1 (w/w), 5% span 80 in oil (v/v), water/oil phase ratio of 1/20 (v/v), and 1000 rpm emulsification speed. Hollow pores were visible on the surface of dehydrated F4 microparticles. F4 microparticles indicated 41.84 ± 2.93 and 45.86 ± 1.65% encapsulation efficiencies for phloroglucinol (F4P) and indomethacin (F4I) with 32.69 ± 1.35 and 31.69 ± 1.98% loading capacities. These microparticles were found to be desirable for extending drug release over short periods (0-3 days) under pH 2.0-7.4. F4P and F4I were effective in suppressing intracellular reactive oxygen species in FD exposed HaCaT cells while increasing cell viability over 24 - 48 h duration.

Development of mucus-penetrating iodine loaded self-emulsifying system for local vaginal delivery

The major goal of this project was to formulate iodine-based self nano-emulsifying drug delivery system to provide improve antimicrobial activity and enhanced mucosal residence time via mucus penetration. Iodine SNEDDS (Self nano-emulsifying drug delivery system) with different concentration were formulated using castor oil as the oil phase, cremophor ethoxylated (CrEL) as a surfactant and after screening a number of vehicles, PEG 400 was employed as co-surfactant. Self-emulsification time, thermodynamic stability tests, robustness to dilution, percent transmittance, droplet size, and drug release were measured. Ternary phase diagrams were plotted to determine the area of emulsification. When compared to the commercial formulation, dissolving experiments revealed that the iodine from the SNEDDS enhanced aqueous solubility. In-vitro iodine release was determined to be around 15% per hour, with muco-adhesive and, muco-penetrating characteristics showing a 38-fold improvement. Furthermore, SNEDDS demonstrated significant antibacterial efficacy against Escherichia coli and Staphylococcus aureus. Similarly, when compared to marketed drugs, in-vitro drug absorption profile from the manufactured SNEDDS shown to be much higher. According to these results iodine containing SNEDDS could be a useful new formulation for iodine mucosal usage.

Fucoxanthin Loaded in Palm Stearin- and Cholesterol-Based Solid Lipid Nanoparticle-Microcapsules, with Improved Stability and Bioavailability In Vivo

Fucoxanthin (FX) is a marine carotenoid that has proven to be a promising marine drug due to the multiple bioactivities it possesses. However, the instability and poor bioavailability of FX greatly limit its application in pharmaceuticals or functional foods. In this study, the creative construction of a solid lipid nanoparticle-microcapsule delivery system using mixed lipids of palm stearin and cholesterol wrapped with gelatin/Arabic gum to load lipophilic FX was fabricated, aiming to improve the stability and bioavailability of FX. The results showed that the encapsulated efficiency (EE) and drug loading capacity (LC) of optimized FX microcapsules (FX-MCs) obtained were as high as 96.24 ± 4.60% and 0.85 ± 0.04%, respectively, after single-factor experiments. The average particle size was 1154 ± 54 nm with negative Zeta potential (−20.71 ± 0.93 mV) as depicted with size-zeta potential spectrometer. The differential scanning calorimeter (DSC) and thermogravimetric analyzer (TG) results indicated that FX-MC has a higher Tg and slower weight loss than FX monomers (FX crystal) and blank MCs. Besides, The Fourier transform infrared spectrometer (FTIR) confirmed the good double encapsulation of FX into the solid lipid and composite coacervate. Moreover, the encapsulated FX showed higher storage stability, sustained release (55.02 ± 2.80% release in 8 h), and significantly improved bioavailability (712.33%) when compared to free FX. The research results can provide a principle theoretical basis for the development and application of FX in pharmaceuticals or functional foods.

Highly Responsive Chitosan-Co-Poly (MAA) Nanomatrices through Cross-Linking Polymerization for Solubility Improvement

In this study, we report the highly responsive chitosan-based chemically cross-linked nanomatrices, a nano-version of hydrogels developed through modified polymerization reaction for solubility improvement of poorly soluble drug simvastatin. The developed nanomatrices were characterized for solubilization efficiency, swelling studies, sol-gel analysis, in vitro drug release studies, DSC, FTIR, XRD, SEM, particle size analysis, and stability studies. An in vivo acute toxicity study was conducted on female Winstor rats, the result of which endorsed the safety and biocompatibility of the system. A porous and fluffy structure was observed under SEM analysis, which supports the great swelling tendency of the system that further governs the in vitro drug release. Zeta sizer analyzed the particle size in the range of 227.8 ± 17.8 nm. Nano sizing and grafting of hydrophilic excipients to the nanomatrices system explains this shift of trend towards the enhancement of solubilization efficiency, and, furthermore, the XRD results confirmed the amorphous nature of the system. FTIR and DSC analysis confirmed the successful grafting and stability to the system. The developed nanomatrices enhanced the release characteristics and solubility of simvastatin significantly and could be an effective technique for solubility and bioavailability enhancement of other BCS class-II drugs. Due to enhanced solubility, efficient method of preparation, excellent physico-chemical features, and rapid and high dissolution and bio-compatibility, the developed nanomatrices may be a promising approach for oral delivery of hydrophobic drugs.

Baicalin-liposomes loaded polyvinyl alcohol-chitosan electrospinning nanofibrous films: Characterization, antibacterial properties and preservation effects on mushrooms

To investigate antibacterial properties and application in food preservation of nanofibrous films (NFs), baicalin-liposomes (BCL-LPs) were loaded into polyvinyl alcohol-chitosan (PVA-CS) substrates to form NFs using electrospinning technology. The microstructure and phase identification of the NFs were characterized. The antibacterial properties and cytotoxicity of NFs were determined. The preservation of the NFs to mushrooms was evaluated. The results showed that smooth and uniform NFs were formed through molecular interaction between BCL-LPs and PVA-CS matrix. The NFs exhibited good antibacterial effects on Escherichia coli and Staphylococcus aureus due to the bacterial destruction resulting from the BCL delivery to bacterial cells by liposomes. In addition, the NFs were compatible with L929 fibroblasts. The BCL-LPs/PVA-CS NFs inhibited weight loss, browning, rancidity and bacterial growth as well as maintained the nutrients of mushrooms. The results show BCL-LPs/PVA-CS NFs possessed effective antibacterial properties, non-cytotoxicity and preservation performance, indicating the potential utilization as food-active packing.

Physicochemical Characterizations and Pharmacokinetic Evaluation of Pentazocine Solid Lipid Nanoparticles against Inflammatory Pain Model

Pentazocine (PTZ), a narcotic-antagonist analgesic, has been extensively used in the treatment of initial carcinogenic or postoperative pain. Hepatic first-pass metabolism results in low oral bioavailability and high dose wastage. Herein, 10 mg (-)-Pentazocine (HPLC-grade) was incorporated to solid lipid nanoparticles (SLNs) using a double water-oil-water (w/o/w) emulsion by solvent emulsification–evaporation technique, followed by high shear homogenization to augment its oral bioavailability, considering the lymphatic uptake. The resulting SLNs were characterized for zeta potential (ZP), particle size (PS), and polydispersity index (PDI) using a zetasizer. The entrapment efficiency (EE) and loading capacity (LC) were calculated. Chemical interactions, through the identification of active functional groups, were assessed by Fourier-transformed infrared (FTIR) spectroscopy. The nature (crystallinity) of the SLNs was determined by X-ray diffractometry (XRD). The surface morphology was depicted by transmission electron microscopy (TEM). In vitro (in Caco-2 cells) and in vivo (in male Wistar rats) investigations were carried out to evaluate the PTZ release behavior and stability, as well as the cellular permeation, cytotoxicity, systemic pharmacokinetics, antinociceptive, anti-inflammatory, and antioxidative activities of PTZ-loaded SLNs, mainly compared to free PTZ (marketed conventional dosage form). The optimized PTZ-loaded SLN2 showed significantly higher in vitro cellular permeation and negligible cytotoxicity. The in vivo bioavailability and pharmacokinetics parameters (t1/2, Cmax) of the PTZ-loaded SLNs were also significantly improved, and the nociception and inflammation, following carrageenan-induced inflammatory pain, were markedly reduced. Concordantly, PTZ-loaded SLNs showed drastic reduction in the oxidative stress (e.g., malonaldehyde (MDA)) and proinflammatory cytokines (e.g., Interleukin (IL)-1β, -6, and TNF-α). The histological features of the paw tissue following, carrageenan-induced inflammation, were significantly improved. Taken together, the results demonstrated that PTZ-loaded SLNs can improve the bioavailability of PTZ by bypassing the hepatic metabolism via the lymphatic uptake, for controlled and sustained drug delivery.

Pesticide-loaded colloidal nanodelivery systems; preparation, characterization, and applications

The fast developments in pesticide-loaded nanodelivery systems over the last decade have inspired many companies and research organizations to highlight potential applications by employing encapsulation approaches in order to protect the agricultural crops. This approach is being used to retard the indiscriminate application of conventional pesticides, as well as, to make ensure the environmental safety. This article shed light on the potential of colloidal delivery systems, particularly controlled releasing profiles of several pesticides with enhanced stability and improved solubility. Colloidal nanodelivery systems, being efficient nanoformulations, have the ability to boost up the pest-control competence for prolonged intervals thru averting the early degradation of active ingredients under severe ecofriendly circumstances. This work is thus aimed to provide critical information on the meaningful role of nanocarriers for loading of pesticides. The smart art of pesticide-loaded nanocarriers can be more fruitful owing to the use of lower amount of active ingredients with improved efficiency along with minimizing the pesticide loss. Also, the future research gaps regarding nano-pesticide formulations, such as role of nanomaterials as active ingredients are discussed briefly. In addition, this article can deliver valuable information to the readers while establishing novel pesticide-loaded nanocarriers for a wide range of applications in the agriculture sectors.

Eplerenone nanocrystals engineered by controlled crystallization for enhanced oral bioavailability

Poor aqueous solubility of eplerenone (EPL) is a major obstacle to achieve sufficient bioavailability after oral administration. In this study, we aimed to develop and evaluate eplerenone nanocrystals (EPL-NCs) for solubility and dissolution enhancement. D-optimal combined mixture process using Design-Expert software was employed to generate different combinations for optimization. EPL-NCs were prepared by a bottom-up, controlled crystallization technique during freeze-drying. The optimized EPL-NCs were evaluated for their size, morphology, thermal behavior, crystalline structure, saturation solubility, dissolution profile, in vivo pharmacokinetics, and acute toxicity. The optimized EPL-NCs showed mean particle size of 46.8 nm. Scanning electron microscopy revealed the formation of elongated parallelepiped shaped NCs. DSC and PXRD analysis confirmed the crystalline structure and the absence of any polymorphic transition in EPL-NCs. Furthermore, EPL-NCs demonstrated a 17-fold prompt increase in the saturation solubility of EPL (8.96 vs. 155.85 µg/mL). The dissolution rate was also significantly higher as indicated by ∼95% dissolution from EPL-NCs in 10 min compared to only 29% from EPL powder. EPL-NCs improved the oral bioavailability as indicated by higher AUC, C_max, and lower T_max than EPL powder. Acute oral toxicity study showed that EPL-NCs do not pose any toxicity concern to the blood and vital organs. Consequently, NCs prepared by controlled crystallization technique present a promising strategy to improve solubility profile, dissolution velocity and bioavailability of poorly water-soluble drugs.

Formulation and assessment of hydroxyzine HCL solid lipid nanoparticles by dual emulsification technique for transdermal delivery

Hydroxyzine HCL (HHCL) is an antihistamine, used for the treatment of allergic skin conditions. The purpose of this study was to achieve a dual phase drug delivery rate across the intact skin, to enhance HHCL permeation through the stratum corneum, to assess the peripheral H₁-antihistaminic activity and the extent to which HHCL was systemically absorbed from transdermal gel loaded with solid lipid nanoparticles (SLNs), as well as to avoid its extreme bitterness. According to 2³ factorial design, eight formulations of HHCL-SLNs were prepared by the double emulsification method. Lipid type (X_A), surfactant concentration (X_B) and co-surfactant concentration (X_C) were the independent variables. All formulations were characterized for their surface morphology, particle size, entrapment efficiency and in-vitro drug release study. The optimized formula that provides greater desirability was then incorporated into the transdermal gel. In addition, the efficacy of the developed gel was tested in-vivo using 2,4-Dinitrochlorobenzene induced atopic dermatitis as lesion model in mice. F4 showed an average diameter 111 nm ± 0.03, zeta potential - 30 MV ± 2.4 and EE 75.2% ± 4.4. TEM images showed spherical, smooth morphology with uniform particles distribution. In-vivo study demonstrated potent antipruritic efficacy of transdermal gel in atopic dermatitis such as induced lesions compared to HHCL gel. Hence, HHCL solid lipid nanoparticles transdermal gel may be considered as potential for delivery of HHCL and alternatively to traditional oral use.

Nano Spray-Dried Drugs for Oral Administration: A Review

Spray drying is an important technology that is fast, simple, reproducible, and scalable. It has a wide application range, that is, in food, chemicals, and encapsulation of pharmaceuticals. The technology can be divided into conventional spray drying and nano spray drying. The key advantage of nano spray drying is the production of drug-loaded nanosized particles for various drug delivery applications. The recent developments in nano spray dryer technology and the market launch of the Nano Spray Dryer B-90 by Büchi Labortechnik AG in 2009 enabled the production of submicron spray-dried particles. This review focuses on nanosized drug delivery systems intended for oral administration produced by nano spray drying. First, the nano spray drying concept, the basic technologies implemented in the equipment, and the effects of the various process parameters on the final dry submicron powder properties are presented. Then, the topics of new formulation strategies of oral drugs are highlighted with examples that have entered the research literature in recent years. Next, the subjects of direct conversion of poorly water-soluble drugs, encapsulation of drugs, and drying of preformed nanoparticles are considered. Finally, topics such as morphology, particle size, size distribution, surface analysis, bioavailability, drug release, release kinetics, and solid-state characterization (by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, nuclear magnetic resonance) of oral drug delivery systems produced by nano spray drying are discussed. The review attempts to provide a comprehensive knowledge base with current literature and foresight to researchers working in the field of pharmaceutical technology and nanotechnology and especially in the field of nano spray drying.